aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/oxnas/patches-5.4/800-oxnas-ehci.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/oxnas/patches-5.4/800-oxnas-ehci.patch')
-rw-r--r--target/linux/oxnas/patches-5.4/800-oxnas-ehci.patch73
1 files changed, 0 insertions, 73 deletions
diff --git a/target/linux/oxnas/patches-5.4/800-oxnas-ehci.patch b/target/linux/oxnas/patches-5.4/800-oxnas-ehci.patch
deleted file mode 100644
index 6c0f1cb109..0000000000
--- a/target/linux/oxnas/patches-5.4/800-oxnas-ehci.patch
+++ /dev/null
@@ -1,73 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -321,6 +321,13 @@ config USB_OCTEON_EHCI
- USB 2.0 device support. All CN6XXX based chips with USB are
- supported.
-
-+config USB_EHCI_OXNAS
-+ tristate "OXNAS EHCI Module"
-+ depends on USB_EHCI_HCD && ARCH_OXNAS
-+ select USB_EHCI_ROOT_HUB_TT
-+ ---help---
-+ Enable support for the OX820 SOC's on-chip EHCI controller.
-+
- endif # USB_EHCI_HCD
-
- config USB_OXU210HP_HCD
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -49,6 +49,7 @@ obj-$(CONFIG_USB_EHCI_HCD_STI) += ehci-s
- obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o
- obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-atmel.o
- obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
-+obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o
-
- obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
---- a/arch/arm/boot/dts/ox820.dtsi
-+++ b/arch/arm/boot/dts/ox820.dtsi
-@@ -106,6 +106,31 @@
- status = "disabled";
- };
-
-+ ehci: ehci@40200100 {
-+ compatible = "plxtech,nas782x-ehci";
-+ reg = <0x40200100 0xf00>;
-+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-+ clocks = <&stdclk CLK_820_USBMPH>, <&pllb>, <&stdclk CLK_820_REF600>;
-+ clock-names = "usb", "refsrc", "phyref";
-+ resets = <&reset RESET_USBHS>, <&reset RESET_USBPHYA>, <&reset RESET_USBPHYB>;
-+ reset-names = "host", "phya", "phyb";
-+ oxsemi,sys-ctrl = <&sys>;
-+ /* Otherwise ref300 is used, which is derived from sata phy
-+ * in that case, usb depends on sata initialization */
-+ /* FIXME: how to make this dependency explicit ? */
-+ oxsemi,ehci_use_pllb;
-+ status = "disabled";
-+
-+ ehci_port1: port@1 {
-+ reg = <1>;
-+ #trigger-source-cells = <0>;
-+ };
-+ ehci_port2: port@2 {
-+ reg = <2>;
-+ #trigger-source-cells = <0>;
-+ };
-+ };
-+
- apb-bridge@44000000 {
- #address-cells = <1>;
- #size-cells = <1>;
---- a/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-+++ b/arch/arm/boot/dts/ox820-cloudengines-pogoplug-series-3.dts
-@@ -105,6 +105,10 @@
- };
- };
-
-+&ehci {
-+ status = "okay";
-+};
-+
- &etha {
- status = "okay";
-