aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/oxnas/patches-5.4/340-oxnas-pcie.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/oxnas/patches-5.4/340-oxnas-pcie.patch')
-rw-r--r--target/linux/oxnas/patches-5.4/340-oxnas-pcie.patch122
1 files changed, 0 insertions, 122 deletions
diff --git a/target/linux/oxnas/patches-5.4/340-oxnas-pcie.patch b/target/linux/oxnas/patches-5.4/340-oxnas-pcie.patch
deleted file mode 100644
index 19065233cf..0000000000
--- a/target/linux/oxnas/patches-5.4/340-oxnas-pcie.patch
+++ /dev/null
@@ -1,122 +0,0 @@
---- a/drivers/pci/controller/Kconfig
-+++ b/drivers/pci/controller/Kconfig
-@@ -48,6 +48,11 @@ config PCIE_CADENCE_EP
- endpoint mode. This PCIe controller may be embedded into many
- different vendors SoCs.
-
-+config PCIE_OXNAS
-+ bool "PLX Oxnas PCIe controller"
-+ depends on ARCH_OXNAS
-+ select PCIEPORTBUS
-+
- endmenu
-
- config PCIE_XILINX_NWL
---- a/drivers/pci/controller/Makefile
-+++ b/drivers/pci/controller/Makefile
-@@ -28,6 +28,7 @@ obj-$(CONFIG_PCIE_ROCKCHIP_EP) += pcie-r
- obj-$(CONFIG_PCIE_ROCKCHIP_HOST) += pcie-rockchip-host.o
- obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o
- obj-$(CONFIG_PCIE_MOBIVEIL) += pcie-mobiveil.o
-+obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o
- obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o
- obj-$(CONFIG_VMD) += vmd.o
- # pcie-hisi.o quirks are needed even without CONFIG_PCIE_DW
---- a/arch/arm/boot/dts/ox820.dtsi
-+++ b/arch/arm/boot/dts/ox820.dtsi
-@@ -289,7 +289,7 @@
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
-- ranges = <0 0x47000000 0x1000000>;
-+ ranges = <0 0x47000000 0x2000>;
-
- scu: scu@0 {
- compatible = "arm,arm11mp-scu";
-@@ -318,5 +318,86 @@
- <0x100 0x500>;
- };
- };
-+
-+ pcie0: pcie-controller@47c00000 {
-+ compatible = "plxtech,nas782x-pcie";
-+ device_type = "pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ /* flag & space bus address host address size */
-+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000
-+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000
-+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000
-+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>;
-+
-+ bus-range = <0x00 0x7f>;
-+
-+ /* cfg inbound translator */
-+ reg = <0x47c00000 0x1000>, <0x47d00000 0x100>;
-+
-+ phys = <&pcie_phy>;
-+ phy-names = "pcie-phy";
-+
-+ #interrupt-cells = <1>;
-+ /* wild card mask, match all bus address & interrupt specifier */
-+ /* format: bus address mask, interrupt specifier mask */
-+ /* each bit 1 means need match, 0 means ignored when match */
-+ interrupt-map-mask = <0 0 0 0>;
-+ /* format: a list of: bus address, interrupt specifier,
-+ * parent interrupt controller & specifier */
-+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
-+ gpios = <&gpio1 12 0>;
-+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>;
-+ clock-names = "pcie", "busclk";
-+ resets = <&reset RESET_PCIEA>;
-+ reset-names = "pcie";
-+
-+ plxtech,pcie-hcsl-bit = <2>;
-+ plxtech,pcie-ctrl-offset = <0x120>;
-+ plxtech,pcie-outbound-offset = <0x138>;
-+ status = "disabled";
-+ };
-+
-+ pcie1: pcie-controller@47e00000 {
-+ compatible = "plxtech,nas782x-pcie";
-+ device_type = "pci";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ /* flag & space bus address host address size */
-+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000
-+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000
-+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000
-+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>;
-+
-+ bus-range = <0x80 0xff>;
-+
-+ /* cfg inbound translator */
-+ reg = <0x47e00000 0x1000>, <0x47f00000 0x100>;
-+
-+ phys = <&pcie_phy>;
-+ phy-names = "pcie-phy";
-+
-+ #interrupt-cells = <1>;
-+ /* wild card mask, match all bus address & interrupt specifier */
-+ /* format: bus address mask, interrupt specifier mask */
-+ /* each bit 1 means need match, 0 means ignored when match */
-+ interrupt-map-mask = <0 0 0 0>;
-+ /* format: a list of: bus address, interrupt specifier,
-+ * parent interrupt controller & specifier */
-+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
-+
-+ /* gpios = <&gpio1 12 0>; */
-+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>;
-+ clock-names = "pcie", "busclk";
-+ resets = <&reset RESET_PCIEB>;
-+ reset-names = "pcie";
-+
-+ plxtech,pcie-hcsl-bit = <3>;
-+ plxtech,pcie-ctrl-offset = <0x124>;
-+ plxtech,pcie-outbound-offset = <0x174>;
-+ status = "disabled";
-+ };
- };
- };