diff options
Diffstat (limited to 'target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch')
| -rw-r--r-- | target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch | 120 |
1 files changed, 0 insertions, 120 deletions
diff --git a/target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch b/target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch deleted file mode 100644 index a6b7137584..0000000000 --- a/target/linux/oxnas/patches-4.14/340-oxnas-pcie.patch +++ /dev/null @@ -1,120 +0,0 @@ ---- a/drivers/pci/host/Kconfig -+++ b/drivers/pci/host/Kconfig -@@ -220,4 +220,9 @@ config VMD - To compile this driver as a module, choose M here: the - module will be called vmd. - -+config PCIE_OXNAS -+ bool "PLX Oxnas PCIe controller" -+ depends on ARCH_OXNAS -+ select PCIEPORTBUS -+ - endmenu ---- a/drivers/pci/host/Makefile -+++ b/drivers/pci/host/Makefile -@@ -20,6 +20,7 @@ obj-$(CONFIG_PCIE_ALTERA) += pcie-altera - obj-$(CONFIG_PCIE_ALTERA_MSI) += pcie-altera-msi.o - obj-$(CONFIG_PCIE_ROCKCHIP) += pcie-rockchip.o - obj-$(CONFIG_PCIE_MEDIATEK) += pcie-mediatek.o -+obj-$(CONFIG_PCIE_OXNAS) += pcie-oxnas.o - obj-$(CONFIG_PCIE_TANGO_SMP8759) += pcie-tango.o - obj-$(CONFIG_VMD) += vmd.o - ---- a/arch/arm/boot/dts/ox820.dtsi -+++ b/arch/arm/boot/dts/ox820.dtsi -@@ -288,7 +288,7 @@ - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; -- ranges = <0 0x47000000 0x1000000>; -+ ranges = <0 0x47000000 0x2000>; - - scu: scu@0 { - compatible = "arm,arm11mp-scu"; -@@ -317,5 +317,86 @@ - <0x100 0x500>; - }; - }; -+ -+ pcie0: pcie-controller@47c00000 { -+ compatible = "plxtech,nas782x-pcie"; -+ device_type = "pci"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ /* flag & space bus address host address size */ -+ ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000 -+ 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000 -+ 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000 -+ 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>; -+ -+ bus-range = <0x00 0x7f>; -+ -+ /* cfg inbound translator */ -+ reg = <0x47c00000 0x1000>, <0x47d00000 0x100>; -+ -+ phys = <&pcie_phy>; -+ phy-names = "pcie-phy"; -+ -+ #interrupt-cells = <1>; -+ /* wild card mask, match all bus address & interrupt specifier */ -+ /* format: bus address mask, interrupt specifier mask */ -+ /* each bit 1 means need match, 0 means ignored when match */ -+ interrupt-map-mask = <0 0 0 0>; -+ /* format: a list of: bus address, interrupt specifier, -+ * parent interrupt controller & specifier */ -+ interrupt-map = <0 0 0 0 &gic 0 19 0x304>; -+ gpios = <&gpio1 12 0>; -+ clocks = <&stdclk CLK_820_PCIEA>, <&pllb>; -+ clock-names = "pcie", "busclk"; -+ resets = <&reset RESET_PCIEA>; -+ reset-names = "pcie"; -+ -+ plxtech,pcie-hcsl-bit = <2>; -+ plxtech,pcie-ctrl-offset = <0x120>; -+ plxtech,pcie-outbound-offset = <0x138>; -+ status = "disabled"; -+ }; -+ -+ pcie1: pcie-controller@47e00000 { -+ compatible = "plxtech,nas782x-pcie"; -+ device_type = "pci"; -+ #address-cells = <3>; -+ #size-cells = <2>; -+ -+ /* flag & space bus address host address size */ -+ ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000 -+ 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000 -+ 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000 -+ 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>; -+ -+ bus-range = <0x80 0xff>; -+ -+ /* cfg inbound translator */ -+ reg = <0x47e00000 0x1000>, <0x47f00000 0x100>; -+ -+ phys = <&pcie_phy>; -+ phy-names = "pcie-phy"; -+ -+ #interrupt-cells = <1>; -+ /* wild card mask, match all bus address & interrupt specifier */ -+ /* format: bus address mask, interrupt specifier mask */ -+ /* each bit 1 means need match, 0 means ignored when match */ -+ interrupt-map-mask = <0 0 0 0>; -+ /* format: a list of: bus address, interrupt specifier, -+ * parent interrupt controller & specifier */ -+ interrupt-map = <0 0 0 0 &gic 0 20 0x304>; -+ -+ /* gpios = <&gpio1 12 0>; */ -+ clocks = <&stdclk CLK_820_PCIEB>, <&pllb>; -+ clock-names = "pcie", "busclk"; -+ resets = <&reset RESET_PCIEB>; -+ reset-names = "pcie"; -+ -+ plxtech,pcie-hcsl-bit = <3>; -+ plxtech,pcie-ctrl-offset = <0x124>; -+ plxtech,pcie-outbound-offset = <0x174>; -+ status = "disabled"; -+ }; - }; - }; |