diff options
Diffstat (limited to 'target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch')
| -rw-r--r-- | target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch | 273 |
1 files changed, 273 insertions, 0 deletions
diff --git a/target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch b/target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch new file mode 100644 index 0000000000..f78ecb26b2 --- /dev/null +++ b/target/linux/oxnas/patches-4.14/100-oxnas-clk-plla-pllb.patch @@ -0,0 +1,273 @@ +--- a/drivers/clk/clk-oxnas.c ++++ b/drivers/clk/clk-oxnas.c +@@ -16,19 +16,42 @@ + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + ++#include <linux/clk.h> ++#include <linux/clkdev.h> + #include <linux/clk-provider.h> + #include <linux/kernel.h> + #include <linux/init.h> ++#include <linux/delay.h> + #include <linux/of.h> + #include <linux/of_device.h> + #include <linux/platform_device.h> + #include <linux/stringify.h> + #include <linux/regmap.h> + #include <linux/mfd/syscon.h> ++#include <linux/reset.h> + + #include <dt-bindings/clock/oxsemi,ox810se.h> + #include <dt-bindings/clock/oxsemi,ox820.h> + ++#define REF300_DIV_INT_SHIFT 8 ++#define REF300_DIV_FRAC_SHIFT 0 ++#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) ++#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) ++ ++#define PLLB_BYPASS 1 ++#define PLLB_ENSAT 3 ++#define PLLB_OUTDIV 4 ++#define PLLB_REFDIV 8 ++#define PLLB_DIV_INT_SHIFT 8 ++#define PLLB_DIV_FRAC_SHIFT 0 ++#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) ++#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) ++ ++#define PLLA_REFDIV_MASK 0x3F ++#define PLLA_REFDIV_SHIFT 8 ++#define PLLA_OUTDIV_MASK 0x7 ++#define PLLA_OUTDIV_SHIFT 4 ++ + /* Standard regmap gate clocks */ + struct clk_oxnas_gate { + struct clk_hw hw; +@@ -49,6 +70,135 @@ struct oxnas_stdclk_data { + #define CLK_SET_REGOFFSET 0x2c + #define CLK_CLR_REGOFFSET 0x30 + ++#define PLLA_CTRL0_REGOFFSET 0x1f0 ++#define PLLA_CTRL1_REGOFFSET 0x1f4 ++#define PLLB_CTRL0_REGOFFSET 0x1001f0 ++#define MHZ (1000 * 1000) ++ ++struct clk_oxnas_pll { ++ struct clk_hw hw; ++ struct device_node *devnode; ++ struct reset_control *rstc; ++ struct regmap *syscon; ++}; ++ ++#define to_clk_oxnas_pll(_hw) container_of(_hw, struct clk_oxnas_pll, hw) ++ ++static unsigned long plla_clk_recalc_rate(struct clk_hw *hw, ++ unsigned long parent_rate) ++{ ++ struct clk_oxnas_pll *plla = to_clk_oxnas_pll(hw); ++ unsigned long fin = parent_rate; ++ unsigned long refdiv, outdiv; ++ unsigned int pll0, fbdiv; ++ ++ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL0_REGOFFSET, &pll0)); ++ ++ refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK; ++ refdiv += 1; ++ outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK; ++ outdiv += 1; ++ ++ BUG_ON(regmap_read(plla->syscon, PLLA_CTRL1_REGOFFSET, &fbdiv)); ++ /* seems we will not be here when pll is bypassed, so ignore this ++ * case */ ++ ++ return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ; ++} ++ ++static const char *pll_clk_parents[] = { ++ "oscillator", ++}; ++ ++static struct clk_ops plla_ops = { ++ .recalc_rate = plla_clk_recalc_rate, ++}; ++ ++static struct clk_init_data clk_plla_init = { ++ .name = "plla", ++ .ops = &plla_ops, ++ .parent_names = pll_clk_parents, ++ .num_parents = ARRAY_SIZE(pll_clk_parents), ++}; ++ ++static int pllb_clk_is_prepared(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ return !!pllb->rstc; ++} ++ ++static int pllb_clk_prepare(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ pllb->rstc = of_reset_control_get(pllb->devnode, NULL); ++ ++ return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0; ++} ++ ++static void pllb_clk_unprepare(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ BUG_ON(IS_ERR(pllb->rstc)); ++ ++ reset_control_put(pllb->rstc); ++ pllb->rstc = NULL; ++} ++ ++static int pllb_clk_enable(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ BUG_ON(IS_ERR(pllb->rstc)); ++ ++ /* put PLL into bypass */ ++ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); ++ wmb(); ++ udelay(10); ++ reset_control_assert(pllb->rstc); ++ udelay(10); ++ /* set PLL B control information */ ++ regmap_write_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, 0xffff, ++ (1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV)); ++ reset_control_deassert(pllb->rstc); ++ udelay(100); ++ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), 0); ++ ++ return 0; ++} ++ ++static void pllb_clk_disable(struct clk_hw *hw) ++{ ++ struct clk_oxnas_pll *pllb = to_clk_oxnas_pll(hw); ++ ++ BUG_ON(IS_ERR(pllb->rstc)); ++ ++ /* put PLL into bypass */ ++ regmap_update_bits(pllb->syscon, PLLB_CTRL0_REGOFFSET, BIT(PLLB_BYPASS), BIT(PLLB_BYPASS)); ++ ++ wmb(); ++ udelay(10); ++ ++ reset_control_assert(pllb->rstc); ++} ++ ++static struct clk_ops pllb_ops = { ++ .prepare = pllb_clk_prepare, ++ .unprepare = pllb_clk_unprepare, ++ .is_prepared = pllb_clk_is_prepared, ++ .enable = pllb_clk_enable, ++ .disable = pllb_clk_disable, ++}; ++ ++static struct clk_init_data clk_pllb_init = { ++ .name = "pllb", ++ .ops = &pllb_ops, ++ .parent_names = pll_clk_parents, ++ .num_parents = ARRAY_SIZE(pll_clk_parents), ++}; ++ + static inline struct clk_oxnas_gate *to_clk_oxnas_gate(struct clk_hw *hw) + { + return container_of(hw, struct clk_oxnas_gate, hw); +@@ -262,3 +412,42 @@ static struct platform_driver oxnas_stdc + }, + }; + builtin_platform_driver(oxnas_stdclk_driver); ++ ++void __init oxnas_init_plla(struct device_node *np) ++{ ++ struct clk *clk; ++ struct clk_oxnas_pll *plla; ++ ++ plla = kmalloc(sizeof(*plla), GFP_KERNEL); ++ BUG_ON(!plla); ++ ++ plla->syscon = syscon_node_to_regmap(of_get_parent(np)); ++ plla->hw.init = &clk_plla_init; ++ plla->devnode = np; ++ plla->rstc = NULL; ++ clk = clk_register(NULL, &plla->hw); ++ BUG_ON(IS_ERR(clk)); ++ /* mark it as enabled */ ++ clk_prepare_enable(clk); ++ of_clk_add_provider(np, of_clk_src_simple_get, clk); ++} ++CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla); ++ ++void __init oxnas_init_pllb(struct device_node *np) ++{ ++ struct clk *clk; ++ struct clk_oxnas_pll *pllb; ++ ++ pllb = kmalloc(sizeof(*pllb), GFP_KERNEL); ++ BUG_ON(!pllb); ++ ++ pllb->syscon = syscon_node_to_regmap(of_get_parent(np)); ++ pllb->hw.init = &clk_pllb_init; ++ pllb->devnode = np; ++ pllb->rstc = NULL; ++ ++ clk = clk_register(NULL, &pllb->hw); ++ BUG_ON(IS_ERR(clk)); ++ of_clk_add_provider(np, of_clk_src_simple_get, clk); ++} ++CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb); +--- a/arch/arm/boot/dts/ox820.dtsi ++++ b/arch/arm/boot/dts/ox820.dtsi +@@ -60,12 +60,6 @@ + clocks = <&osc>; + }; + +- plla: plla { +- compatible = "fixed-clock"; +- #clock-cells = <0>; +- clock-frequency = <850000000>; +- }; +- + armclk: armclk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; +@@ -265,6 +259,19 @@ + compatible = "oxsemi,ox820-stdclk", "oxsemi,ox810se-stdclk"; + #clock-cells = <1>; + }; ++ ++ plla: plla { ++ compatible = "plxtech,nas782x-plla"; ++ #clock-cells = <0>; ++ clocks = <&osc>; ++ }; ++ ++ pllb: pllb { ++ compatible = "plxtech,nas782x-pllb"; ++ #clock-cells = <0>; ++ clocks = <&osc>; ++ resets = <&reset RESET_PLLB>; ++ }; + }; + }; + +@@ -286,6 +293,13 @@ + clocks = <&armclk>; + }; + ++ watchdog@620 { ++ compatible = "mpcore_wdt"; ++ reg = <0x620 0x20>; ++ interrupts = <GIC_PPI 14 (GIC_CPU_MASK_RAW(3)|IRQ_TYPE_LEVEL_HIGH)>; ++ clocks = <&armclk>; ++ }; ++ + gic: gic@1000 { + compatible = "arm,arm11mp-gic"; + interrupt-controller; |