diff options
Diffstat (limited to 'target/linux/oxnas/files')
8 files changed, 4409 insertions, 0 deletions
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts new file mode 100644 index 0000000000..c0bf34c3f4 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio-mycloud.dts @@ -0,0 +1,157 @@ +/dts-v1/; + +#include "ox820.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Akitio MyCloud"; + + compatible = "akitio,mycloud", "oxsemi,ox820"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + gpios = <&gpio1 9 0 &gpio1 10 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c>; + i2c-gpio,delay-us = <10>; + #address-cells = <1>; + #size-cells = <0>; + ds1307: rtc@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_buttons>; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + power { + label = "power"; + gpios = <&gpio0 11 1>; + linux,code = <KEY_POWER>; + }; + reset { + label = "reset"; + gpios = <&gpio1 6 1>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_leds>; + status { + label = "akitio:red:status"; + gpios = <&gpio0 29 0>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_poweroff>; + gpios = <&gpio1 13 2>; + }; +}; + +&pinctrl { + pinctrl_i2c: i2c-0 { + i2c { + pins = "gpio41", "gpio42"; /* MF_B9, MF_B10 */ + function = "gpio"; + /* ToDo: find a way to set debounce for those pins */ + }; + }; + pinctrl_buttons: buttons-0 { + buttons { + pins = "gpio11", "gpio38"; /* MF_A11, MF_B6 GPIO */ + function = "gpio"; + }; + }; + pinctrl_leds: leds-0 { + leds { + pins = "gpio29"; /* MF_A29 GPIO */ + function = "gpio"; + }; + }; + pinctrl_poweroff: poweroff-0 { + poweroff { + pins = "gpio45"; /* MF_B13 GPIO */ + function = "gpio"; + }; + }; +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&nandc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x0 0x26c0000>; + }; + + partition@26c0000 { + label = "ubi"; + reg = <0x26c0000 0xd940000>; + }; + }; +}; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&ehci { + status = "okay"; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplug-pro.dts new file mode 100644 index 0000000000..363fd30d20 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-cloudengines-pogoplug-pro.dts @@ -0,0 +1,98 @@ +/* + * cloudengines-pogoplug-series-3.dtsi - Device tree file for Cloud Engines PogoPlug Series 3 + * + * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com> + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +#include "ox820.dtsi" + +/ { + model = "Cloud Engines PogoPlug Pro"; + + compatible = "cloudengines,pogoplugpro", "oxsemi,ox820"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + leds { + compatible = "gpio-leds"; + + blue { + label = "pogoplug:blue"; + gpios = <&gpio0 2 0>; + default-state = "keep"; + }; + + orange { + label = "pogoplug:orange"; + gpios = <&gpio1 16 1>; + default-state = "keep"; + }; + + green { + label = "pogoplug:green"; + gpios = <&gpio1 17 1>; + default-state = "keep"; + }; + }; +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&nandc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + read-only; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg212.dts new file mode 100644 index 0000000000..834ea77653 --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-mitrastar-stg212.dts @@ -0,0 +1,116 @@ +/dts-v1/; + +#include "ox820.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "MitraStar Technology Corp. STG-212"; + + compatible = "mitrastar,stg-212", "oxsemi,ox820"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio1 11 1>; + linux,code = <KEY_RESTART>; + }; + copy { + label = "copy"; + gpios = <&gpio1 13 1>; + linux,code = <KEY_COPY>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "zyxel:blue:status"; + gpios = <&gpio1 5 0>; + }; + status2 { + label = "zyxel:red:status"; + gpios = <&gpio1 6 1>; + }; + copy { + label = "zyxel:orange:copy"; + gpios = <&gpio1 8 1>; + }; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + gpios = <&gpio1 9 0 &gpio1 10 0>; + i2c-gpio,delay-us = <10>; + }; + +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&nandc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "boot"; + reg = <0x00000000 0x00e00000>; + read-only; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x00e00000 0x07200000>; + }; + }; +}; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&ehci { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts new file mode 100644 index 0000000000..badfa2578e --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-shuttle-kd20.dts @@ -0,0 +1,187 @@ +/dts-v1/; + +#include "ox820.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + model = "Shuttle KD20"; + + compatible = "shuttle,kd20", "oxsemi,ox820"; + + chosen { + bootargs = "earlyprintk"; + stdout-path = "serial0:115200n8"; + }; + + memory { + /* 128Mbytes DDR */ + reg = <0x60000000 0x8000000>; + }; + + aliases { + serial0 = &uart0; + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + i2c-gpio { + compatible = "i2c-gpio"; + gpios = <&gpio1 9 0 &gpio1 10 0>; + i2c-gpio,delay-us = <10>; + #address-cells = <1>; + #size-cells = <0>; + rtc0: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&gpio0 10 1>; + linux,code = <KEY_POWER>; + }; + reset { + label = "reset"; + gpios = <&gpio0 11 1>; + linux,code = <KEY_RESTART>; + }; + eject1 { + label = "eject1"; + gpios = <&gpio0 5 1>; + linux,code = <KEY_EJECTCD>; + }; + eject2 { + label = "eject2"; + gpios = <&gpio0 6 1>; + linux,code = <162>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + status { + label = "kd20:blue:status"; + gpios = <&gpio1 16 0>; + }; + status2 { + label = "kd20:red:status"; + gpios = <&gpio1 17 0>; + }; + hdd1blue { + label = "kd20:blue:hdd1"; + gpios = <&gpio0 27 0>; + linux,default-trigger = "ata1"; + }; + hdd1red { + label = "kd20:red:hdd1"; + gpios = <&gpio1 4 0>; + }; + hdd2blue { + label = "kd20:blue:hdd2"; + gpios = <&gpio1 6 0>; + linux,default-trigger = "ata2"; + }; + hdd2red { + label = "kd20:red:hdd2"; + gpios = <&gpio1 7 0>; + }; + usb { + label = "kd20:blue:usb"; + gpios = <&gpio1 8 0>; + }; + }; + + beeper: beeper { + compatible = "gpio-beeper"; + gpios = <&gpio1 11 0>; + }; + + gpio-fan { + compatible = "gpio-fan"; + gpios = <&gpio0 2 1>; + gpio-fan,speed-map = <0 0 + 3000 1>; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 9 0>; + }; +}; + +&uart0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&nandc { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-ecc-mode = "soft"; + nand-ecc-algo = "hamming"; + + partition@0 { + label = "stage1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "u-boot"; + reg = <0x00040000 0x00200000>; + read-only; + }; + + partition@240000 { + label = "initrd"; + reg = <0x00240000 0x00600000>; + }; + + partition@840000 { + label = "kernel"; + reg = <0x00840000 0x007C0000>; + }; + + partition@e00000 { + label = "ubi"; + reg = <0x01000000 0x07000000>; + }; + }; +}; + +ða { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etha_mdio>; +}; + +&ehci { + status = "okay"; +}; + +&sata { + status = "okay"; + nr-ports = <2>; +}; + +&pcie0 { + status = "okay"; +}; diff --git a/target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h b/target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h new file mode 100644 index 0000000000..fbc372787e --- /dev/null +++ b/target/linux/oxnas/files/arch/arm/include/debug/uncompress-ox820.h @@ -0,0 +1,32 @@ +/* linux/include/asm-arm/arch-oxnas/uncompress.h + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#define OXNAS_UART1_BASE 0x44200000 + +static inline void putc(int c) +{ + static volatile unsigned char *uart = + (volatile unsigned char *)OXNAS_UART1_BASE; + + while (!(uart[5] & 0x20)) { /* LSR reg THR empty bit */ + barrier(); + } + uart[0] = c; /* THR register */ +} + +static inline void flush(void) +{ +} + +#define arch_decomp_setup() + +#define arch_decomp_wdog() + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c new file mode 100644 index 0000000000..64afa728a1 --- /dev/null +++ b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c @@ -0,0 +1,2505 @@ +/* + * sata_oxnas + * A driver to interface the 934 based sata core present in the ox820 + * with libata and scsi + * based on sata_oxnas driver by Ma Haijun <mahaijuns@gmail.com> + * based on ox820 sata code by: + * Copyright (c) 2007 Oxford Semiconductor Ltd. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2, or (at your option) + * any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/ata.h> +#include <linux/libata.h> +#include <linux/of_platform.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/spinlock.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/clk.h> +#include <linux/reset.h> + +#include <linux/io.h> +#include <linux/sizes.h> + +static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val &= ~mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val |= mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_value_mask(void __iomem *p, + unsigned mask, unsigned new_value) +{ + /* TODO sanity check mask & new_value = new_value */ + u32 val = readl_relaxed(p); + + val &= ~mask; + val |= new_value; + writel_relaxed(val, p); +} + +/* sgdma request structure */ +struct sgdma_request { + volatile u32 qualifier; + volatile u32 control; + dma_addr_t src_pa; + dma_addr_t dst_pa; +} __packed __aligned(4); + + +/* Controller information */ +enum { + SATA_OXNAS_MAX_PRD = 254, + SATA_OXNAS_DMA_SIZE = SATA_OXNAS_MAX_PRD * + sizeof(struct ata_bmdma_prd) + + sizeof(struct sgdma_request), + SATA_OXNAS_MAX_PORTS = 2, + /** The different Oxsemi SATA core version numbers */ + SATA_OXNAS_CORE_VERSION = 0x1f3, + SATA_OXNAS_IRQ_FLAG = IRQF_SHARED, + SATA_OXNAS_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA | + ATA_FLAG_NO_ATAPI /*| ATA_FLAG_NCQ*/), + SATA_OXNAS_QUEUE_DEPTH = 32, + + SATA_OXNAS_DMA_BOUNDARY = 0xFFFFFFFF, +}; + + +/* + * SATA Port Registers + */ +enum { + /** sata host port register offsets */ + ORB1 = 0x00, + ORB2 = 0x04, + ORB3 = 0x08, + ORB4 = 0x0C, + ORB5 = 0x10, + MASTER_STATUS = 0x10, + FIS_CTRL = 0x18, + FIS_DATA = 0x1C, + INT_STATUS = 0x30, + INT_CLEAR = 0x30, + INT_ENABLE = 0x34, + INT_DISABLE = 0x38, + VERSION = 0x3C, + SATA_CONTROL = 0x5C, + SATA_COMMAND = 0x60, + HID_FEATURES = 0x64, + PORT_CONTROL = 0x68, + DRIVE_CONTROL = 0x6C, + /** These registers allow access to the link layer registers + that reside in a different clock domain to the processor bus */ + LINK_DATA = 0x70, + LINK_RD_ADDR = 0x74, + LINK_WR_ADDR = 0x78, + LINK_CONTROL = 0x7C, + /* window control */ + WIN1LO = 0x80, + WIN1HI = 0x84, + WIN2LO = 0x88, + WIN2HI = 0x8C, + WIN0_CONTROL = 0x90, +}; + +/** sata port register bits */ +enum{ + /** + * commands to issue in the master status to tell it to move shadow , + * registers to the actual device , + */ + SATA_OPCODE_MASK = 0x00000007, + CMD_WRITE_TO_ORB_REGS_NO_COMMAND = 0x4, + CMD_WRITE_TO_ORB_REGS = 0x2, + CMD_SYNC_ESCAPE = 0x7, + CMD_CORE_BUSY = (1 << 7), + CMD_DRIVE_SELECT_SHIFT = 12, + CMD_DRIVE_SELECT_MASK = (0xf << CMD_DRIVE_SELECT_SHIFT), + + /** interrupt bits */ + INT_END_OF_CMD = 1 << 0, + INT_LINK_SERROR = 1 << 1, + INT_ERROR = 1 << 2, + INT_LINK_IRQ = 1 << 3, + INT_REG_ACCESS_ERR = 1 << 7, + INT_BIST_FIS = 1 << 11, + INT_MASKABLE = INT_END_OF_CMD | + INT_LINK_SERROR | + INT_ERROR | + INT_LINK_IRQ | + INT_REG_ACCESS_ERR | + INT_BIST_FIS, + INT_WANT = INT_END_OF_CMD | + INT_LINK_SERROR | + INT_REG_ACCESS_ERR | + INT_ERROR, + INT_ERRORS = INT_LINK_SERROR | + INT_REG_ACCESS_ERR | + INT_ERROR, + + /** raw interrupt bits, unmaskable, but do not generate interrupts */ + RAW_END_OF_CMD = INT_END_OF_CMD << 16, + RAW_LINK_SERROR = INT_LINK_SERROR << 16, + RAW_ERROR = INT_ERROR << 16, + RAW_LINK_IRQ = INT_LINK_IRQ << 16, + RAW_REG_ACCESS_ERR = INT_REG_ACCESS_ERR << 16, + RAW_BIST_FIS = INT_BIST_FIS << 16, + RAW_WANT = INT_WANT << 16, + RAW_ERRORS = INT_ERRORS << 16, + + /** + * variables to write to the device control register to set the current + * device, ie. master or slave. + */ + DR_CON_48 = 2, + DR_CON_28 = 0, + + SATA_CTL_ERR_MASK = 0x00000016, + +}; + +/* ATA SGDMA register offsets */ +enum { + SGDMA_CONTROL = 0x0, + SGDMA_STATUS = 0x4, + SGDMA_REQUESTPTR = 0x8, + SGDMA_RESETS = 0xC, + SGDMA_CORESIZE = 0x10, +}; + +/* DMA controller register offsets */ +enum { + DMA_CONTROL = 0x0, + DMA_CORESIZE = 0x20, + + DMA_CONTROL_RESET = (1 << 12), +}; + +enum { + /* see DMA core docs for the values. Out means from memory (bus A) out + * to disk (bus B) */ + SGDMA_REQCTL0OUT = 0x0497c03d, + /* burst mode disabled when no micro code used */ + SGDMA_REQCTL0IN = 0x0493a3c1, + SGDMA_REQCTL1OUT = 0x0497c07d, + SGDMA_REQCTL1IN = 0x0497a3c5, + SGDMA_CONTROL_NOGO = 0x3e, + SGDMA_CONTROL_GO = SGDMA_CONTROL_NOGO | 1, + SGDMA_ERRORMASK = 0x3f, + SGDMA_BUSY = 0x80, + + SGDMA_RESETS_CTRL = 1 << 0, + SGDMA_RESETS_ARBT = 1 << 1, + SGDMA_RESETS_AHB = 1 << 2, + SGDMA_RESETS_ALL = SGDMA_RESETS_CTRL | + SGDMA_RESETS_ARBT | + SGDMA_RESETS_AHB, + + /* Final EOTs */ + SGDMA_REQQUAL = 0x00220001, + +}; + +/** SATA core register offsets */ +enum { + DM_DBG1 = 0x000, + RAID_SET = 0x004, + DM_DBG2 = 0x008, + DATACOUNT_PORT0 = 0x010, + DATACOUNT_PORT1 = 0x014, + CORE_INT_STATUS = 0x030, + CORE_INT_CLEAR = 0x030, + CORE_INT_ENABLE = 0x034, + CORE_INT_DISABLE = 0x038, + CORE_REBUILD_ENABLE = 0x050, + CORE_FAILED_PORT_R = 0x054, + DEVICE_CONTROL = 0x068, + EXCESS = 0x06C, + RAID_SIZE_LOW = 0x070, + RAID_SIZE_HIGH = 0x074, + PORT_ERROR_MASK = 0x078, + IDLE_STATUS = 0x07C, + RAID_CONTROL = 0x090, + DATA_PLANE_CTRL = 0x0AC, + CORE_DATAPLANE_STAT = 0x0b8, + PROC_PC = 0x100, + CONFIG_IN = 0x3d8, + PROC_START = 0x3f0, + PROC_RESET = 0x3f4, + UCODE_STORE = 0x1000, + RAID_WP_BOT_LOW = 0x1FF0, + RAID_WP_BOT_HIGH = 0x1FF4, + RAID_WP_TOP_LOW = 0x1FF8, + RAID_WP_TOP_HIGH = 0x1FFC, + DATA_MUX_RAM0 = 0x8000, + DATA_MUX_RAM1 = 0xA000, + PORT_SIZE = 0x10000, +}; + +enum { + /* Sata core debug1 register bits */ + CORE_PORT0_DATA_DIR_BIT = 20, + CORE_PORT1_DATA_DIR_BIT = 21, + CORE_PORT0_DATA_DIR = 1 << CORE_PORT0_DATA_DIR_BIT, + CORE_PORT1_DATA_DIR = 1 << CORE_PORT1_DATA_DIR_BIT, + + /** sata core control register bits */ + SCTL_CLR_ERR = 0x00003016, + RAID_CLR_ERR = 0x0000011e, + + /* Interrupts direct from the ports */ + NORMAL_INTS_WANTED = 0x00000303, + + /* shift these left by port number */ + COREINT_HOST = 0x00000001, + COREINT_END = 0x00000100, + CORERAW_HOST = COREINT_HOST << 16, + CORERAW_END = COREINT_END << 16, + + /* Interrupts from the RAID controller only */ + RAID_INTS_WANTED = 0x00008300, + + /* The bits in the IDLE_STATUS that, when set indicate an idle core */ + IDLE_CORES = (1 << 18) | (1 << 19), + + /* Data plane control error-mask mask and bit, these bit in the data + * plane control mask out errors from the ports that prevent the SGDMA + * care from sending an interrupt */ + DPC_ERROR_MASK = 0x00000300, + DPC_ERROR_MASK_BIT = 0x00000100, + /* enable jbod micro-code */ + DPC_JBOD_UCODE = 1 << 0, + DPC_FIS_SWCH = 1 << 1, + + /** Device Control register bits */ + DEVICE_CONTROL_DMABT = 1 << 4, + DEVICE_CONTROL_ABORT = 1 << 2, + DEVICE_CONTROL_PAD = 1 << 3, + DEVICE_CONTROL_PADPAT = 1 << 16, + DEVICE_CONTROL_PRTRST = 1 << 8, + DEVICE_CONTROL_RAMRST = 1 << 12, + DEVICE_CONTROL_ATA_ERR_OVERRIDE = 1 << 28, + + /** oxsemi HW raid modes */ + OXNASSATA_NOTRAID = 0, + OXNASSATA_RAID0 = 1, + OXNASSATA_RAID1 = 2, + /** OX820 specific HW-RAID register values */ + RAID_TWODISKS = 3, + UNKNOWN_MODE = ~0, + + CONFIG_IN_RESUME = 2, +}; + +/* SATA PHY Registers */ +enum { + PHY_STAT = 0x00, + PHY_DATA = 0x04, +}; + +enum { + STAT_READ_VALID = (1 << 21), + STAT_CR_ACK = (1 << 20), + STAT_CR_READ = (1 << 19), + STAT_CR_WRITE = (1 << 18), + STAT_CAP_DATA = (1 << 17), + STAT_CAP_ADDR = (1 << 16), + + STAT_ACK_ANY = STAT_CR_ACK | + STAT_CR_READ | + STAT_CR_WRITE | + STAT_CAP_DATA | + STAT_CAP_ADDR, + + CR_READ_ENABLE = (1 << 16), + CR_WRITE_ENABLE = (1 << 17), + CR_CAP_DATA = (1 << 18), +}; + +enum { + /* Link layer registers */ + SERROR_IRQ_MASK = 5, +}; + +enum { + OXNAS_SATA_SOFTRESET = 1, + OXNAS_SATA_REINIT = 2, +}; + +enum { + OXNAS_SATA_UCODE_RAID0, + OXNAS_SATA_UCODE_RAID1, + OXNAS_SATA_UCODE_JBOD, + OXNAS_SATA_UCODE_NONE, +}; + +enum { + SATA_UNLOCKED, + SATA_WRITER, + SATA_READER, + SATA_REBUILD, + SATA_HWRAID, + SATA_SCSI_STACK +}; + +typedef irqreturn_t (*oxnas_sata_isr_callback_t)(int, unsigned long, int); + +struct sata_oxnas_host_priv { + void __iomem *port_base; + void __iomem *dmactl_base; + void __iomem *sgdma_base; + void __iomem *core_base; + void __iomem *phy_base; + dma_addr_t dma_base; + void __iomem *dma_base_va; + size_t dma_size; + int irq; + int n_ports; + int current_ucode; + u32 port_frozen; + u32 port_in_eh; + struct clk *clk; + struct reset_control *rst_sata; + struct reset_control *rst_link; + struct reset_control *rst_phy; + spinlock_t phy_lock; + spinlock_t core_lock; + int core_locked; + int reentrant_port_no; + int hw_lock_count; + int direct_lock_count; + void *locker_uid; + int current_locker_type; + int scsi_nonblocking_attempts; + oxnas_sata_isr_callback_t isr_callback; + void *isr_arg; + wait_queue_head_t fast_wait_queue; + wait_queue_head_t scsi_wait_queue; +}; + + +struct sata_oxnas_port_priv { + void __iomem *port_base; + void __iomem *dmactl_base; + void __iomem *sgdma_base; + void __iomem *core_base; + struct sgdma_request *sgdma_request; + dma_addr_t sgdma_request_pa; +}; + +static u8 sata_oxnas_check_status(struct ata_port *ap); +static int sata_oxnas_cleanup(struct ata_host *ah); +static void sata_oxnas_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf); +static void sata_oxnas_irq_on(struct ata_port *ap); +static void sata_oxnas_post_reset_init(struct ata_port *ap); + +static int sata_oxnas_acquire_hw(struct ata_port *ap, int may_sleep, + int timeout_jiffies); +static void sata_oxnas_release_hw(struct ata_port *ap); + +static const void *HW_LOCKER_UID = (void *)0xdeadbeef; + +/*************************************************************************** +* ASIC access +***************************************************************************/ +static void wait_cr_ack(void __iomem *phy_base) +{ + while ((ioread32(phy_base + PHY_STAT) >> 16) & 0x1f) + ; /* wait for an ack bit to be set */ +} + +static u16 read_cr(void __iomem *phy_base, u16 address) +{ + iowrite32((u32)address, phy_base + PHY_STAT); + wait_cr_ack(phy_base); + iowrite32(CR_READ_ENABLE, phy_base + PHY_DATA); + wait_cr_ack(phy_base); + return (u16)ioread32(phy_base + PHY_STAT); +} + +static void write_cr(void __iomem *phy_base, u16 data, u16 address) +{ + iowrite32((u32)address, phy_base + PHY_STAT); + wait_cr_ack(phy_base); + iowrite32((data | CR_CAP_DATA), phy_base + PHY_DATA); + wait_cr_ack(phy_base); + iowrite32(CR_WRITE_ENABLE, phy_base + PHY_DATA); + wait_cr_ack(phy_base); +} + +#define PH_GAIN 2 +#define FR_GAIN 3 +#define PH_GAIN_OFFSET 6 +#define FR_GAIN_OFFSET 8 +#define PH_GAIN_MASK (0x3 << PH_GAIN_OFFSET) +#define FR_GAIN_MASK (0x3 << FR_GAIN_OFFSET) +#define USE_INT_SETTING (1<<5) + +void workaround5458(struct ata_host *ah) +{ + struct sata_oxnas_host_priv *hd = ah->private_data; + void __iomem *phy_base = hd->phy_base; + u16 rx_control; + unsigned i; + + for (i = 0; i < 2; i++) { + rx_control = read_cr(phy_base, 0x201d + (i << 8)); + rx_control &= ~(PH_GAIN_MASK | FR_GAIN_MASK); + rx_control |= PH_GAIN << PH_GAIN_OFFSET; + rx_control |= (FR_GAIN << FR_GAIN_OFFSET) | USE_INT_SETTING; + write_cr(phy_base, rx_control, 0x201d+(i<<8)); + } +} + +/** + * allows access to the link layer registers + * @param link_reg the link layer register to access (oxsemi indexing ie + * 00 = static config, 04 = phy ctrl) + */ +void sata_oxnas_link_write(struct ata_port *ap, unsigned int link_reg, u32 val) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + struct sata_oxnas_host_priv *hd = ap->host->private_data; + void __iomem *port_base = pd->port_base; + u32 patience; + unsigned long flags; + + DPRINTK("P%d [0x%02x]->0x%08x\n", ap->port_no, link_reg, val); + + spin_lock_irqsave(&hd->phy_lock, flags); + iowrite32(val, port_base + LINK_DATA); + + /* accessed twice as a work around for a bug in the SATA abp bridge + * hardware (bug 6828) */ + iowrite32(link_reg , port_base + LINK_WR_ADDR); + ioread32(port_base + LINK_WR_ADDR); + + for (patience = 0x100000; patience > 0; --patience) { + if (ioread32(port_base + LINK_CONTROL) & 0x00000001) + break; + } + spin_unlock_irqrestore(&hd->phy_lock, flags); +} + +static int sata_oxnas_scr_write_port(struct ata_port *ap, unsigned int sc_reg, + u32 val) +{ + sata_oxnas_link_write(ap, 0x20 + (sc_reg * 4), val); + return 0; +} + +static int sata_oxnas_scr_write(struct ata_link *link, unsigned int sc_reg, + u32 val) +{ + return sata_oxnas_scr_write_port(link->ap, sc_reg, val); +} + +u32 sata_oxnas_link_read(struct ata_port *ap, unsigned int link_reg) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + struct sata_oxnas_host_priv *hd = ap->host->private_data; + void __iomem *port_base = pd->port_base; + u32 result; + u32 patience; + unsigned long flags; + + spin_lock_irqsave(&hd->phy_lock, flags); + /* accessed twice as a work around for a bug in the SATA abp bridge + * hardware (bug 6828) */ + iowrite32(link_reg, port_base + LINK_RD_ADDR); + ioread32(port_base + LINK_RD_ADDR); + + for (patience = 0x100000; patience > 0; --patience) { + if (ioread32(port_base + LINK_CONTROL) & 0x00000001) + break; + } + if (patience == 0) + DPRINTK("link read timed out for port %d\n", ap->port_no); + + result = ioread32(port_base + LINK_DATA); + spin_unlock_irqrestore(&hd->phy_lock, flags); + + return result; +} + +static int sata_oxnas_scr_read_port(struct ata_port *ap, unsigned int sc_reg, + u32 *val) +{ + *val = sata_oxnas_link_read(ap, 0x20 + (sc_reg*4)); + return 0; +} + +static int sata_oxnas_scr_read(struct ata_link *link, + unsigned int sc_reg, u32 *val) +{ + return sata_oxnas_scr_read_port(link->ap, sc_reg, val); +} + +/** + * sata_oxnas_irq_clear is called during probe just before the interrupt handler is + * registered, to be sure hardware is quiet. It clears and masks interrupt bits + * in the SATA core. + * + * @param ap hardware with the registers in + */ +static void sata_oxnas_irq_clear(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *port_priv = ap->private_data; + + /* clear pending interrupts */ + iowrite32(~0, port_priv->port_base + INT_CLEAR); + iowrite32(COREINT_END, port_priv->core_base + CORE_INT_CLEAR); +} + +/** + * qc_issue is used to make a command active, once the hardware and S/G tables + * have been prepared. IDE BMDMA drivers use the helper function + * ata_qc_issue_prot() for taskfile protocol-based dispatch. More advanced + * drivers roll their own ->qc_issue implementation, using this as the + * "issue new ATA command to hardware" hook. + * @param qc the queued command to issue + */ +static unsigned int sata_oxnas_qc_issue(struct ata_queued_cmd *qc) +{ + struct sata_oxnas_port_priv *pd = qc->ap->private_data; + struct sata_oxnas_host_priv *hd = qc->ap->host->private_data; + + void __iomem *port_base = pd->port_base; + void __iomem *core_base = pd->core_base; + int port_no = qc->ap->port_no; + int no_microcode = (hd->current_ucode == UNKNOWN_MODE); + u32 reg; + + /* check the core is idle */ + if (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY) { + int count = 0; + + DPRINTK("core busy for a command on port %d\n", + qc->ap->port_no); + do { + mdelay(1); + if (++count > 100) { + DPRINTK("core busy for a command on port %d\n", + qc->ap->port_no); + /* CrazyDumpDebug(); */ + sata_oxnas_cleanup(qc->ap->host); + } + } while (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY); + } + + /* enable passing of error signals to DMA sub-core by clearing the + * appropriate bit */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + if (no_microcode) + reg |= (DPC_ERROR_MASK_BIT | (DPC_ERROR_MASK_BIT << 1)); + reg &= ~(DPC_ERROR_MASK_BIT << port_no); + iowrite32(reg, core_base + DATA_PLANE_CTRL); + + /* Disable all interrupts for ports and RAID controller */ + iowrite32(~0, port_base + INT_DISABLE); + + /* Disable all interrupts for core */ + iowrite32(~0, core_base + CORE_INT_DISABLE); + wmb(); + + /* Load the command settings into the orb registers */ + sata_oxnas_tf_load(qc->ap, &qc->tf); + + /* both pio and dma commands use dma */ + if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) { + /* Start the DMA */ + iowrite32(SGDMA_CONTROL_GO, pd->sgdma_base + SGDMA_CONTROL); + wmb(); + } + + /* enable End of command interrupt */ + iowrite32(INT_WANT, port_base + INT_ENABLE); + iowrite32(COREINT_END, core_base + CORE_INT_ENABLE); + wmb(); + + /* Start the command */ + reg = ioread32(port_base + SATA_COMMAND); + reg &= ~SATA_OPCODE_MASK; + reg |= CMD_WRITE_TO_ORB_REGS; + iowrite32(reg , port_base + SATA_COMMAND); + wmb(); + + return 0; +} + +/** + * Will schedule the libATA error handler on the premise that there has + * been a hotplug event on the port specified + */ +void sata_oxnas_checkforhotplug(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + ata_ehi_hotplugged(&ap->link.eh_info); + ata_port_freeze(ap); +} + + +/**************************************************************************/ +/* Locking */ +/**************************************************************************/ +/** + * The underlying function that controls access to the sata core + * + * @return non-zero indicates that you have acquired exclusive access to the + * sata core. + */ +static int __acquire_sata_core( + struct ata_host *ah, + int port_no, + oxnas_sata_isr_callback_t callback, + void *arg, + int may_sleep, + int timeout_jiffies, + int hw_access, + void *uid, + int locker_type) +{ + unsigned long end = jiffies + timeout_jiffies; + int acquired = 0; + unsigned long flags; + int timed_out = 0; + struct sata_oxnas_host_priv *hd; + + DEFINE_WAIT(wait); + + if (!ah) + return acquired; + + hd = ah->private_data; + + spin_lock_irqsave(&hd->core_lock, flags); + + DPRINTK("Entered uid %p, port %d, h/w count %d, d count %d, " + "callback %p, hw_access %d, core_locked %d, " + "reentrant_port_no %d, isr_callback %p\n", + uid, port_no, hd->hw_lock_count, hd->direct_lock_count, + callback, hw_access, hd->core_locked, hd->reentrant_port_no, + hd->isr_callback); + + while (!timed_out) { + if (hd->core_locked || + (!hw_access && hd->scsi_nonblocking_attempts)) { + /* Can only allow access if from SCSI/SATA stack and if + * reentrant access is allowed and this access is to the + * same port for which the lock is current held + */ + if (hw_access && (port_no == hd->reentrant_port_no)) { + BUG_ON(!hd->hw_lock_count); + ++(hd->hw_lock_count); + + DPRINTK("Allow SCSI/SATA re-entrant access to " + "uid %p port %d\n", uid, port_no); + acquired = 1; + break; + } else if (!hw_access) { + if ((locker_type == SATA_READER) && + (hd->current_locker_type == SATA_READER)) { + WARN(1, + "Already locked by reader, " + "uid %p, locker_uid %p, " + "port %d, h/w count %d, " + "d count %d, hw_access %d\n", + uid, hd->locker_uid, port_no, + hd->hw_lock_count, + hd->direct_lock_count, + hw_access); + goto check_uid; + } + + if ((locker_type != SATA_READER) && + (locker_type != SATA_WRITER)) { + goto wait_for_lock; + } + +check_uid: + WARN(uid == hd->locker_uid, "Attempt to lock " + "by locker type %d uid %p, already " + "locked by locker type %d with " + "locker_uid %p, port %d, " + "h/w count %d, d count %d, " + "hw_access %d\n", locker_type, uid, + hd->current_locker_type, + hd->locker_uid, port_no, + hd->hw_lock_count, + hd->direct_lock_count, hw_access); + } + } else { + WARN(hd->hw_lock_count || hd->direct_lock_count, + "Core unlocked but counts non-zero: uid %p, " + "locker_uid %p, port %d, h/w count %d, " + "d count %d, hw_access %d\n", uid, + hd->locker_uid, port_no, hd->hw_lock_count, + hd->direct_lock_count, hw_access); + + BUG_ON(hd->current_locker_type != SATA_UNLOCKED); + + WARN(hd->locker_uid, "Attempt to lock uid %p when " + "locker_uid %p is non-zero, port %d, " + "h/w count %d, d count %d, hw_access %d\n", + uid, hd->locker_uid, port_no, hd->hw_lock_count, + hd->direct_lock_count, hw_access); + + if (!hw_access) { + /* Direct access attempting to acquire + * non-contented lock + */ + /* Must have callback for direct access */ + BUG_ON(!callback); + /* Sanity check lock state */ + BUG_ON(hd->reentrant_port_no != -1); + + hd->isr_callback = callback; + hd->isr_arg = arg; + ++(hd->direct_lock_count); + + hd->current_locker_type = locker_type; + } else { + /* SCSI/SATA attempting to acquire + * non-contented lock + */ + /* No callbacks for SCSI/SATA access */ + BUG_ON(callback); + /* No callback args for SCSI/SATA access */ + BUG_ON(arg); + + /* Sanity check lock state */ + BUG_ON(hd->isr_callback); + BUG_ON(hd->isr_arg); + + ++(hd->hw_lock_count); + hd->reentrant_port_no = port_no; + + hd->current_locker_type = SATA_SCSI_STACK; + } + + hd->core_locked = 1; + hd->locker_uid = uid; + acquired = 1; + break; + } + +wait_for_lock: + if (!may_sleep) { + DPRINTK("Denying for uid %p locker_type %d, " + "hw_access %d, port %d, current_locker_type %d as " + "cannot sleep\n", uid, locker_type, hw_access, port_no, + hd->current_locker_type); + + if (hw_access) + ++(hd->scsi_nonblocking_attempts); + + break; + } + + /* Core is locked and we're allowed to sleep, so wait to be + * awoken when the core is unlocked + */ + for (;;) { + prepare_to_wait(hw_access ? &hd->scsi_wait_queue : + &hd->fast_wait_queue, + &wait, TASK_UNINTERRUPTIBLE); + if (!hd->core_locked && + !(!hw_access && hd->scsi_nonblocking_attempts)) { + /* We're going to use variables that will have + * been changed by the waker prior to clearing + * core_locked so we need to ensure we see + * changes to all those variables + */ + smp_rmb(); + break; + } + if (time_after(jiffies, end)) { + printk(KERN_WARNING "__acquire_sata_core() " + "uid %p failing for port %d timed out, " + "locker_uid %p, h/w count %d, " + "d count %d, callback %p, hw_access %d, " + "core_locked %d, reentrant_port_no %d, " + "isr_callback %p, isr_arg %p\n", uid, + port_no, hd->locker_uid, + hd->hw_lock_count, + hd->direct_lock_count, callback, + hw_access, hd->core_locked, + hd->reentrant_port_no, hd->isr_callback, + hd->isr_arg); + timed_out = 1; + break; + } + spin_unlock_irqrestore(&hd->core_lock, flags); + if (!schedule_timeout(4*HZ)) { + printk(KERN_INFO "__acquire_sata_core() uid %p, " + "locker_uid %p, timed-out of " + "schedule(), checking overall timeout\n", + uid, hd->locker_uid); + } + spin_lock_irqsave(&hd->core_lock, flags); + } + finish_wait(hw_access ? &hd->scsi_wait_queue : + &hd->fast_wait_queue, &wait); + } + + if (hw_access && acquired) { + if (hd->scsi_nonblocking_attempts) + hd->scsi_nonblocking_attempts = 0; + + /* Wake any other SCSI/SATA waiters so they can get reentrant + * access to the same port if appropriate. This is because if + * the SATA core is locked by fast access, or SCSI/SATA access + * to other port, then can have >1 SCSI/SATA waiters on the wait + * list so want to give reentrant accessors a chance to get + * access ASAP + */ + if (!list_empty(&hd->scsi_wait_queue.head)) + wake_up(&hd->scsi_wait_queue); + } + + DPRINTK("Leaving uid %p with acquired = %d, port %d, callback %p\n", + uid, acquired, port_no, callback); + + spin_unlock_irqrestore(&hd->core_lock, flags); + + return acquired; +} + +int sata_core_has_fast_waiters(struct ata_host *ah) +{ + int has_waiters; + unsigned long flags; + struct sata_oxnas_host_priv *hd = ah->private_data; + + spin_lock_irqsave(&hd->core_lock, flags); + has_waiters = !list_empty(&hd->fast_wait_queue.head); + spin_unlock_irqrestore(&hd->core_lock, flags); + + return has_waiters; +} +EXPORT_SYMBOL(sata_core_has_fast_waiters); + +int sata_core_has_scsi_waiters(struct ata_host *ah) +{ + int has_waiters; + unsigned long flags; + struct sata_oxnas_host_priv *hd = ah->private_data; + + spin_lock_irqsave(&hd->core_lock, flags); + has_waiters = hd->scsi_nonblocking_attempts || + !list_empty(&hd->scsi_wait_queue.head); + spin_unlock_irqrestore(&hd->core_lock, flags); + + return has_waiters; +} +EXPORT_SYMBOL(sata_core_has_scsi_waiters); + +/* + * ata_port operation to gain ownership of the SATA hardware prior to issuing + * a command against a SATA host. Allows any number of users of the port against + * which the lock was first acquired, thus enforcing that only one SATA core + * port may be operated on at once. + */ +static int sata_oxnas_acquire_hw( + struct ata_port *ap, + int may_sleep, + int timeout_jiffies) +{ + return __acquire_sata_core(ap->host, ap->port_no, NULL, 0, may_sleep, + timeout_jiffies, 1, (void *)HW_LOCKER_UID, + SATA_SCSI_STACK); +} + +/* + * operation to release ownership of the SATA hardware + */ +static void sata_oxnas_release_hw(struct ata_port *ap) +{ + unsigned long flags; + int released = 0; + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + spin_lock_irqsave(&hd->core_lock, flags); + + DPRINTK("Entered port_no = %d, h/w count %d, d count %d, " + "core locked = %d, reentrant_port_no = %d, isr_callback %p\n", + ap->port_no, hd->hw_lock_count, hd->direct_lock_count, + hd->core_locked, hd->reentrant_port_no, hd->isr_callback); + + if (!hd->core_locked) { + /* Nobody holds the SATA lock */ + printk(KERN_WARNING "Nobody holds SATA lock, port_no %d\n", + ap->port_no); + released = 1; + } else if (!hd->hw_lock_count) { + /* SCSI/SATA has released without holding the lock */ + printk(KERN_WARNING "SCSI/SATA does not hold SATA lock, " + "port_no %d\n", ap->port_no); + } else { + /* Trap incorrect usage */ + BUG_ON(hd->reentrant_port_no == -1); + BUG_ON(ap->port_no != hd->reentrant_port_no); + BUG_ON(hd->direct_lock_count); + BUG_ON(hd->current_locker_type != SATA_SCSI_STACK); + + WARN(!hd->locker_uid || (hd->locker_uid != HW_LOCKER_UID), + "Invalid locker uid %p, h/w count %d, d count %d, " + "reentrant_port_no %d, core_locked %d, " + "isr_callback %p\n", hd->locker_uid, hd->hw_lock_count, + hd->direct_lock_count, hd->reentrant_port_no, + hd->core_locked, hd->isr_callback); + + if (--(hd->hw_lock_count)) { + DPRINTK("Still nested port_no %d\n", ap->port_no); + } else { + DPRINTK("Release port_no %d\n", ap->port_no); + hd->reentrant_port_no = -1; + hd->isr_callback = NULL; + hd->current_locker_type = SATA_UNLOCKED; + hd->locker_uid = 0; + hd->core_locked = 0; + released = 1; + wake_up(!list_empty(&hd->scsi_wait_queue.head) ? + &hd->scsi_wait_queue : + &hd->fast_wait_queue); + } + } + + DPRINTK("Leaving, port_no %d, count %d\n", ap->port_no, + hd->hw_lock_count); + + spin_unlock_irqrestore(&hd->core_lock, flags); + + /* CONFIG_SATA_OX820_DIRECT_HWRAID */ + /* if (released) + ox820hwraid_restart_queue(); + } */ +} + +static inline int sata_oxnas_is_host_frozen(struct ata_host *ah) +{ + struct sata_oxnas_host_priv *hd = ah->private_data; + + smp_rmb(); + return hd->port_in_eh || hd->port_frozen; +} + + +static inline u32 sata_oxnas_hostportbusy(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + return (ioread32(hd->port_base + SATA_COMMAND) & CMD_CORE_BUSY) || + (hd->n_ports > 1 && + (ioread32(hd->port_base + PORT_SIZE + SATA_COMMAND) & + CMD_CORE_BUSY)); +} + +static inline u32 sata_oxnas_hostdmabusy(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + + return ioread32(pd->sgdma_base + SGDMA_STATUS) & SGDMA_BUSY; +} + + +/** + * Turns on the cores clock and resets it + */ +static void sata_oxnas_reset_core(struct ata_host *ah) +{ + struct sata_oxnas_host_priv *host_priv = ah->private_data; + int n; + + DPRINTK("ENTER\n"); + clk_prepare_enable(host_priv->clk); + + reset_control_assert(host_priv->rst_sata); + reset_control_assert(host_priv->rst_link); + reset_control_assert(host_priv->rst_phy); + + udelay(50); + + /* un-reset the PHY, then Link and Controller */ + reset_control_deassert(host_priv->rst_phy); + udelay(50); + + reset_control_deassert(host_priv->rst_sata); + reset_control_deassert(host_priv->rst_link); + udelay(50); + + workaround5458(ah); + /* tune for sata compatibility */ + sata_oxnas_link_write(ah->ports[0], 0x60, 0x2988); + + for (n = 0; n < host_priv->n_ports; n++) { + /* each port in turn */ + sata_oxnas_link_write(ah->ports[n], 0x70, 0x55629); + } + udelay(50); +} + + +/** + * Called after an identify device command has worked out what kind of device + * is on the port + * + * @param port The port to configure + * @param pdev The hardware associated with controlling the port + */ +static void sata_oxnas_dev_config(struct ata_device *pdev) +{ + struct sata_oxnas_port_priv *pd = pdev->link->ap->private_data; + void __iomem *port_base = pd->port_base; + u32 reg; + + DPRINTK("ENTER\n"); + /* Set the bits to put the port into 28 or 48-bit node */ + reg = ioread32(port_base + DRIVE_CONTROL); + reg &= ~3; + reg |= (pdev->flags & ATA_DFLAG_LBA48) ? DR_CON_48 : DR_CON_28; + iowrite32(reg, port_base + DRIVE_CONTROL); + + /* if this is an ATA-6 disk, put port into ATA-5 auto translate mode */ + if (pdev->flags & ATA_DFLAG_LBA48) { + reg = ioread32(port_base + PORT_CONTROL); + reg |= 2; + iowrite32(reg, port_base + PORT_CONTROL); + } +} +/** + * called to write a taskfile into the ORB registers + * @param ap hardware with the registers in + * @param tf taskfile to write to the registers + */ +static void sata_oxnas_tf_load(struct ata_port *ap, + const struct ata_taskfile *tf) +{ + u32 count = 0; + u32 Orb1 = 0; + u32 Orb2 = 0; + u32 Orb3 = 0; + u32 Orb4 = 0; + u32 Command_Reg; + + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *port_base = port_priv->port_base; + unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR; + + /* wait a maximum of 10ms for the core to be idle */ + do { + Command_Reg = ioread32(port_base + SATA_COMMAND); + if (!(Command_Reg & CMD_CORE_BUSY)) + break; + count++; + udelay(50); + } while (count < 200); + + /* check if the ctl register has interrupts disabled or enabled and + * modify the interrupt enable registers on the ata core as required */ + if (tf->ctl & ATA_NIEN) { + /* interrupts disabled */ + u32 mask = (COREINT_END << ap->port_no); + + iowrite32(mask, port_priv->core_base + CORE_INT_DISABLE); + sata_oxnas_irq_clear(ap); + } else { + sata_oxnas_irq_on(ap); + } + + Orb2 |= (tf->command) << 24; + + /* write 48 or 28 bit tf parameters */ + if (is_addr) { + /* set LBA bit as it's an address */ + Orb1 |= (tf->device & ATA_LBA) << 24; + + if (tf->flags & ATA_TFLAG_LBA48) { + Orb1 |= ATA_LBA << 24; + Orb2 |= (tf->hob_nsect) << 8; + Orb3 |= (tf->hob_lbal) << 24; + Orb4 |= (tf->hob_lbam) << 0; + Orb4 |= (tf->hob_lbah) << 8; + Orb4 |= (tf->hob_feature) << 16; + } else { + Orb3 |= (tf->device & 0xf) << 24; + } + + /* write 28-bit lba */ + Orb2 |= (tf->nsect) << 0; + Orb2 |= (tf->feature) << 16; + Orb3 |= (tf->lbal) << 0; + Orb3 |= (tf->lbam) << 8; + Orb3 |= (tf->lbah) << 16; + Orb4 |= (tf->ctl) << 24; + } + + if (tf->flags & ATA_TFLAG_DEVICE) + Orb1 |= (tf->device) << 24; + + ap->last_ctl = tf->ctl; + + /* write values to registers */ + iowrite32(Orb1, port_base + ORB1); + iowrite32(Orb2, port_base + ORB2); + iowrite32(Orb3, port_base + ORB3); + iowrite32(Orb4, port_base + ORB4); +} + + +void sata_oxnas_set_mode(struct ata_host *ah, u32 mode, u32 force) +{ + struct sata_oxnas_host_priv *host_priv = ah->private_data; + void __iomem *core_base = host_priv->core_base; + + unsigned int *src; + void __iomem *dst; + unsigned int progmicrocode = 0; + unsigned int changeparameters = 0; + + u32 previous_mode; + + /* these micro-code programs _should_ include the version word */ + + /* JBOD */ + static const unsigned int jbod[] = { + 0x07B400AC, 0x0228A280, 0x00200001, 0x00204002, 0x00224001, + 0x00EE0009, 0x00724901, 0x01A24903, 0x00E40009, 0x00224001, + 0x00621120, 0x0183C908, 0x00E20005, 0x00718908, 0x0198A206, + 0x00621124, 0x0183C908, 0x00E20046, 0x00621104, 0x0183C908, + 0x00E20015, 0x00EE009D, 0x01A3E301, 0x00E2001B, 0x0183C900, + 0x00E2001B, 0x00210001, 0x00EE0020, 0x01A3E302, 0x00E2009D, + 0x0183C901, 0x00E2009D, 0x00210002, 0x0235D700, 0x0208A204, + 0x0071C908, 0x000F8207, 0x000FC207, 0x0071C920, 0x000F8507, + 0x000FC507, 0x0228A240, 0x02269A40, 0x00094004, 0x00621104, + 0x0180C908, 0x00E40031, 0x00621112, 0x01A3C801, 0x00E2002B, + 0x00294000, 0x0228A220, 0x01A69ABF, 0x002F8000, 0x002FC000, + 0x0198A204, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007, + 0x0183C903, 0x00E2009D, 0x0228A220, 0x0071890C, 0x0208A206, + 0x0198A206, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007, + 0x00EE009D, 0x00621104, 0x0183C908, 0x00E2004A, 0x00EE009D, + 0x01A3C901, 0x00E20050, 0x0021E7FF, 0x0183E007, 0x00E2009D, + 0x00EE0054, 0x0061600B, 0x0021E7FF, 0x0183C507, 0x00E2009D, + 0x01A3E301, 0x00E2005A, 0x0183C900, 0x00E2005A, 0x00210001, + 0x00EE005F, 0x01A3E302, 0x00E20005, 0x0183C901, 0x00E20005, + 0x00210002, 0x0235D700, 0x0208A204, 0x000F8109, 0x000FC109, + 0x0071C918, 0x000F8407, 0x000FC407, 0x0001C022, 0x01A1A2BF, + 0x0001C106, 0x00088007, 0x02269A40, 0x00094004, 0x00621112, + 0x01A3C801, 0x00E4007F, 0x00621104, 0x0180C908, 0x00E4008D, + 0x00621128, 0x0183C908, 0x00E2006C, 0x01A3C901, 0x00E2007B, + 0x0021E7FF, 0x0183E007, 0x00E2007F, 0x00EE006C, 0x0061600B, + 0x0021E7FF, 0x0183C507, 0x00E4006C, 0x00621111, 0x01A3C801, + 0x00E2007F, 0x00621110, 0x01A3C801, 0x00E20082, 0x0228A220, + 0x00621119, 0x01A3C801, 0x00E20086, 0x0001C022, 0x01B1A220, + 0x0001C106, 0x00088007, 0x0198A204, 0x00294000, 0x01A69ABF, + 0x002F8000, 0x002FC000, 0x0183C903, 0x00E20005, 0x0228A220, + 0x0071890C, 0x0208A206, 0x0198A206, 0x0001C022, 0x01B1A220, + 0x0001C106, 0x00088007, 0x00EE009D, 0x00621128, 0x0183C908, + 0x00E20005, 0x00621104, 0x0183C908, 0x00E200A6, 0x0062111C, + 0x0183C908, 0x00E20005, 0x0071890C, 0x0208A206, 0x0198A206, + 0x00718908, 0x0208A206, 0x00EE0005, ~0 + }; + + /* Bi-Modal RAID-0/1 */ + static const unsigned int raid[] = { + 0x00F20145, 0x00EE20FA, 0x00EE20A7, 0x0001C009, 0x00EE0004, + 0x00220000, 0x0001000B, 0x037003FF, 0x00700018, 0x037003FE, + 0x037043FD, 0x00704118, 0x037043FC, 0x01A3D240, 0x00E20017, + 0x00B3C235, 0x00E40018, 0x0093C104, 0x00E80014, 0x0093C004, + 0x00E80017, 0x01020000, 0x00274020, 0x00EE0083, 0x0080C904, + 0x0093C104, 0x00EA0020, 0x0093C103, 0x00EC001F, 0x00220002, + 0x00924104, 0x0005C009, 0x00EE0058, 0x0093CF04, 0x00E80026, + 0x00900F01, 0x00600001, 0x00910400, 0x00EE0058, 0x00601604, + 0x01A00003, 0x00E2002C, 0x01018000, 0x00274040, 0x00EE0083, + 0x0093CF03, 0x00EC0031, 0x00220003, 0x00924F04, 0x0005C009, + 0x00810104, 0x00B3C235, 0x00E20037, 0x0022C000, 0x00218210, + 0x00EE0039, 0x0022C001, 0x00218200, 0x00600401, 0x00A04901, + 0x00604101, 0x01A0C401, 0x00E20040, 0x00216202, 0x00EE0041, + 0x00216101, 0x02018506, 0x00EE2141, 0x00904901, 0x00E20049, + 0x00A00401, 0x00600001, 0x02E0C301, 0x00EE2141, 0x00216303, + 0x037003EE, 0x01A3C001, 0x00E40105, 0x00250080, 0x00204000, + 0x002042F1, 0x0004C001, 0x00230001, 0x00100006, 0x02C18605, + 0x00100006, 0x01A3D502, 0x00E20055, 0x00EE0053, 0x00004009, + 0x00000004, 0x00B3C235, 0x00E40062, 0x0022C001, 0x0020C000, + 0x00EE2141, 0x0020C001, 0x00EE2141, 0x00EE006B, 0x0022C000, + 0x0060D207, 0x00EE2141, 0x00B3C242, 0x00E20069, 0x01A3D601, + 0x00E2006E, 0x02E0C301, 0x00EE2141, 0x00230001, 0x00301303, + 0x00EE007B, 0x00218210, 0x01A3C301, 0x00E20073, 0x00216202, + 0x00EE0074, 0x00216101, 0x02018506, 0x00214000, 0x037003EE, + 0x01A3C001, 0x00E40108, 0x00230001, 0x00100006, 0x00250080, + 0x00204000, 0x002042F1, 0x0004C001, 0x00EE007F, 0x0024C000, + 0x01A3D1F0, 0x00E20088, 0x00230001, 0x00300000, 0x01A3D202, + 0x00E20085, 0x00EE00A5, 0x00B3C800, 0x00E20096, 0x00218000, + 0x00924709, 0x0005C009, 0x00B20802, 0x00E40093, 0x037103FD, + 0x00710418, 0x037103FC, 0x00EE0006, 0x00220000, 0x0001000F, + 0x00EE0006, 0x00800B0C, 0x00B00001, 0x00204000, 0x00208550, + 0x00208440, 0x002083E0, 0x00208200, 0x00208100, 0x01008000, + 0x037083EE, 0x02008212, 0x02008216, 0x01A3C201, 0x00E400A5, + 0x0100C000, 0x00EE20FA, 0x02800000, 0x00208000, 0x00B24C00, + 0x00E400AD, 0x00224001, 0x00724910, 0x0005C009, 0x00B3CDC4, + 0x00E200D5, 0x00B3CD29, 0x00E200D5, 0x00B3CD20, 0x00E200D5, + 0x00B3CD24, 0x00E200D5, 0x00B3CDC5, 0x00E200D2, 0x00B3CD39, + 0x00E200D2, 0x00B3CD30, 0x00E200D2, 0x00B3CD34, 0x00E200D2, + 0x00B3CDCA, 0x00E200CF, 0x00B3CD35, 0x00E200CF, 0x00B3CDC8, + 0x00E200CC, 0x00B3CD25, 0x00E200CC, 0x00B3CD40, 0x00E200CB, + 0x00B3CD42, 0x00E200CB, 0x01018000, 0x00EE0083, 0x0025C000, + 0x036083EE, 0x0000800D, 0x00EE00D8, 0x036083EE, 0x00208035, + 0x00EE00DA, 0x036083EE, 0x00208035, 0x00EE00DA, 0x00208007, + 0x036083EE, 0x00208025, 0x036083EF, 0x02400000, 0x01A3D208, + 0x00E200D8, 0x0067120A, 0x0021C000, 0x0021C224, 0x00220000, + 0x00404B1C, 0x00600105, 0x00800007, 0x0020C00E, 0x00214000, + 0x01004000, 0x01A0411F, 0x00404E01, 0x01A3C101, 0x00E200F1, + 0x00B20800, 0x00E400D8, 0x00220001, 0x0080490B, 0x00B04101, + 0x0040411C, 0x00EE00E1, 0x02269A01, 0x01020000, 0x02275D80, + 0x01A3D202, 0x00E200F4, 0x01B75D80, 0x01030000, 0x01B69A01, + 0x00EE00D8, 0x01A3D204, 0x00E40104, 0x00224000, 0x0020C00E, + 0x0020001E, 0x00214000, 0x01004000, 0x0212490E, 0x00214001, + 0x01004000, 0x02400000, 0x00B3D702, 0x00E80112, 0x00EE010E, + 0x00B3D702, 0x00E80112, 0x00B3D702, 0x00E4010E, 0x00230001, + 0x00EE0140, 0x00200005, 0x036003EE, 0x00204001, 0x00EE0116, + 0x00230001, 0x00100006, 0x02C18605, 0x00100006, 0x01A3D1F0, + 0x00E40083, 0x037003EE, 0x01A3C002, 0x00E20121, 0x0020A300, + 0x0183D102, 0x00E20124, 0x037003EE, 0x01A00005, 0x036003EE, + 0x01A0910F, 0x00B3C20F, 0x00E2012F, 0x01A3D502, 0x00E20116, + 0x01A3C002, 0x00E20116, 0x00B3D702, 0x00E4012C, 0x00300000, + 0x00EE011F, 0x02C18605, 0x00100006, 0x00EE0116, 0x01A3D1F0, + 0x00E40083, 0x037003EE, 0x01A3C004, 0x00E20088, 0x00200003, + 0x036003EE, 0x01A3D502, 0x00E20136, 0x00230001, 0x00B3C101, + 0x00E4012C, 0x00100006, 0x02C18605, 0x00100006, 0x00204000, + 0x00EE0116, 0x00100006, 0x01A3D1F0, 0x00E40083, 0x01000000, + 0x02400000, ~0 + }; + + DPRINTK("ENTER: mode:%d, force:%d\n", mode, force); + + if (force) + previous_mode = UNKNOWN_MODE; + else + previous_mode = host_priv->current_ucode; + + if (mode == previous_mode) + return; + + host_priv->current_ucode = mode; + + /* decide what needs to be done using the STD in my logbook */ + switch (previous_mode) { + case OXNASSATA_RAID1: + switch (mode) { + case OXNASSATA_RAID0: + changeparameters = 1; + break; + case OXNASSATA_NOTRAID: + changeparameters = 1; + progmicrocode = 1; + break; + } + break; + case OXNASSATA_RAID0: + switch (mode) { + case OXNASSATA_RAID1: + changeparameters = 1; + break; + case OXNASSATA_NOTRAID: + changeparameters = 1; + progmicrocode = 1; + break; + } + break; + case OXNASSATA_NOTRAID: + switch (mode) { + case OXNASSATA_RAID0: + case OXNASSATA_RAID1: + changeparameters = 1; + progmicrocode = 1; + break; + } + break; + case UNKNOWN_MODE: + changeparameters = 1; + progmicrocode = 1; + break; + } + + /* no need to reprogram everything if already in the right mode */ + if (progmicrocode) { + /* reset micro-code processor */ + iowrite32(1, core_base + PROC_RESET); + wmb(); + + /* select micro-code */ + switch (mode) { + case OXNASSATA_RAID1: + case OXNASSATA_RAID0: + VPRINTK("Loading RAID micro-code\n"); + src = (unsigned int *)&raid[1]; + break; + case OXNASSATA_NOTRAID: + VPRINTK("Loading JBOD micro-code\n"); + src = (unsigned int *)&jbod[1]; + break; + default: + BUG(); + break; + } + + /* load micro code */ + dst = core_base + UCODE_STORE; + while (*src != ~0) { + iowrite32(*src, dst); + src++; + dst += sizeof(*src); + } + wmb(); + } + + if (changeparameters) { + u32 reg; + /* set other mode dependent flags */ + switch (mode) { + case OXNASSATA_RAID1: + /* clear JBOD mode */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg |= DPC_JBOD_UCODE; + reg &= ~DPC_FIS_SWCH; + iowrite32(reg, core_base + DATA_PLANE_CTRL); + wmb(); + + /* set the hardware up for RAID-1 */ + iowrite32(0, core_base + RAID_WP_BOT_LOW); + iowrite32(0, core_base + RAID_WP_BOT_HIGH); + iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW); + iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH); + iowrite32(0, core_base + RAID_SIZE_LOW); + iowrite32(0, core_base + RAID_SIZE_HIGH); + wmb(); + break; + case OXNASSATA_RAID0: + /* clear JBOD mode */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg |= DPC_JBOD_UCODE; + reg &= ~DPC_FIS_SWCH; + iowrite32(reg, core_base + DATA_PLANE_CTRL); + wmb(); + + /* set the hardware up for RAID-1 */ + iowrite32(0, core_base + RAID_WP_BOT_LOW); + iowrite32(0, core_base + RAID_WP_BOT_HIGH); + iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW); + iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH); + iowrite32(0xffffffff, core_base + RAID_SIZE_LOW); + iowrite32(0x7fffffff, core_base + RAID_SIZE_HIGH); + wmb(); + break; + case OXNASSATA_NOTRAID: + /* enable jbod mode */ + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg &= ~DPC_JBOD_UCODE; + reg &= ~DPC_FIS_SWCH; + iowrite32(reg, core_base + DATA_PLANE_CTRL); + wmb(); + + /* start micro-code processor*/ + iowrite32(1, core_base + PROC_START); + break; + default: + reg = ioread32(core_base + DATA_PLANE_CTRL); + reg |= DPC_JBOD_UCODE; + reg &= ~DPC_FIS_SWCH; + iowrite32(reg, core_base + DATA_PLANE_CTRL); + wmb(); + break; + } + } +} + +/** + * sends a sync-escape if there is a link present + */ +static inline void sata_oxnas_send_sync_escape(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 reg; + + /* read the SSTATUS register and only send a sync escape if there is a + * link active */ + if ((sata_oxnas_link_read(ap, 0x20) & 3) == 3) { + reg = ioread32(pd->port_base + SATA_COMMAND); + reg &= ~SATA_OPCODE_MASK; + reg |= CMD_SYNC_ESCAPE; + iowrite32(reg, pd->port_base + SATA_COMMAND); + } +} + +/* clears errors */ +static inline void sata_oxnas_clear_CS_error(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 *base = pd->port_base; + u32 reg; + + reg = ioread32(base + SATA_CONTROL); + reg &= SATA_CTL_ERR_MASK; + iowrite32(reg, base + SATA_CONTROL); +} + +static inline void sata_oxnas_reset_sgdma(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + + iowrite32(SGDMA_RESETS_CTRL, pd->sgdma_base + SGDMA_RESETS); +} + +static inline void sata_oxnas_reset_dma(struct ata_port *ap, int assert) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 reg; + + reg = ioread32(pd->dmactl_base + DMA_CONTROL); + if (assert) + reg |= DMA_CONTROL_RESET; + else + reg &= ~DMA_CONTROL_RESET; + + iowrite32(reg, pd->dmactl_base + DMA_CONTROL); +}; + +/** + * Clears the error caused by the core's registers being accessed when the + * core is busy. + */ +static inline void sata_oxnas_clear_reg_access_error(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 *base = pd->port_base; + u32 reg; + + reg = ioread32(base + INT_STATUS); + + DPRINTK("ENTER\n"); + if (reg & INT_REG_ACCESS_ERR) { + DPRINTK("clearing register access error on port %d\n", + ap->port_no); + iowrite32(INT_REG_ACCESS_ERR, base + INT_STATUS); + } + reg = ioread32(base + INT_STATUS); + if (reg & INT_REG_ACCESS_ERR) + DPRINTK("register access error didn't clear\n"); +} + +static inline void sata_oxnas_clear_sctl_error(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 *base = pd->port_base; + u32 reg; + + reg = ioread32(base + SATA_CONTROL); + reg |= SCTL_CLR_ERR; + iowrite32(reg, base + SATA_CONTROL); +} + +static inline void sata_oxnas_clear_raid_error(struct ata_host *ah) +{ + return; +}; + +/** + * Clean up all the state machines in the sata core. + * @return post cleanup action required + */ +static int sata_oxnas_cleanup(struct ata_host *ah) +{ + struct sata_oxnas_host_priv *hd = ah->private_data; + int actions_required = 0; + int n; + + printk(KERN_INFO "sata_oxnas: resetting SATA core\n"); + /* core not recovering, reset it */ + mdelay(5); + sata_oxnas_reset_core(ah); + mdelay(5); + actions_required |= OXNAS_SATA_REINIT; + /* Perform any SATA core re-initialisation after reset post reset init + * needs to be called for both ports as there's one reset for both + * ports */ + for (n = 0; n < hd->n_ports; n++) + sata_oxnas_post_reset_init(ah->ports[n]); + + + return actions_required; +} + +/** + * ata_qc_new - Request an available ATA command, for queueing + * @ap: Port associated with device @dev + * @return non zero will refuse a new command, zero will may grant on subject + * to conditions elsewhere. + * + */ +static int sata_oxnas_qc_new(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + DPRINTK("port %d\n", ap->port_no); + smp_rmb(); + if (hd->port_frozen || hd->port_in_eh) + return 1; + else + return !sata_oxnas_acquire_hw(ap, 0, 0); +} + +/** + * releases the lock on the port the command used + */ +static void sata_oxnas_qc_free(struct ata_queued_cmd *qc) +{ + DPRINTK("\n"); + sata_oxnas_release_hw(qc->ap); +} + +static void sata_oxnas_freeze(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + DPRINTK("\n"); + hd->port_frozen |= BIT(ap->port_no); + smp_wmb(); +} + +static void sata_oxnas_thaw(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + DPRINTK("\n"); + hd->port_frozen &= ~BIT(ap->port_no); + smp_wmb(); +} + +void sata_oxnas_freeze_host(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + DPRINTK("ENTER\n"); + hd->port_in_eh |= BIT(ap->port_no); + smp_wmb(); +} + +void sata_oxnas_thaw_host(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + DPRINTK("ENTER\n"); + hd->port_in_eh &= ~BIT(ap->port_no); + smp_wmb(); +} + +static void sata_oxnas_post_internal_cmd(struct ata_queued_cmd *qc) +{ + DPRINTK("ENTER\n"); + /* If the core is busy here, make it idle */ + if (qc->flags & ATA_QCFLAG_FAILED) + sata_oxnas_cleanup(qc->ap->host); +} + + +/** + * turn on the interrupts + * + * @param ap Hardware with the registers in + */ +static void sata_oxnas_irq_on(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + u32 mask = (COREINT_END << ap->port_no); + + /* Clear pending interrupts */ + iowrite32(~0, pd->port_base + INT_CLEAR); + iowrite32(mask, pd->core_base + CORE_INT_STATUS); + wmb(); + + /* enable End of command interrupt */ + iowrite32(INT_WANT, pd->port_base + INT_ENABLE); + iowrite32(mask, pd->core_base + CORE_INT_ENABLE); +} + + +/** @return true if the port has a cable connected */ +int sata_oxnas_check_link(struct ata_port *ap) +{ + int reg; + + sata_oxnas_scr_read_port(ap, SCR_STATUS, ®); + /* Check for the cable present indicated by SCR status bit-0 set */ + return reg & 0x1; +} + +/** + * ata_std_postreset - standard postreset callback + * @link: the target ata_link + * @classes: classes of attached devices + * + * This function is invoked after a successful reset. Note that + * the device might have been reset more than once using + * different reset methods before postreset is invoked. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +static void sata_oxnas_postreset(struct ata_link *link, unsigned int *classes) +{ + struct ata_port *ap = link->ap; + struct sata_oxnas_host_priv *hd = ap->host->private_data; + + unsigned int dev; + + DPRINTK("ENTER\n"); + ata_std_postreset(link, classes); + + /* turn on phy error detection by removing the masks */ + sata_oxnas_link_write(ap->host->ports[0], 0x0c, 0x30003); + if (hd->n_ports > 1) + sata_oxnas_link_write(ap->host->ports[1], 0x0c, 0x30003); + + /* bail out if no device is present */ + if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) { + DPRINTK("EXIT, no device\n"); + return; + } + + /* go through all the devices and configure them */ + for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) { + if (ap->link.device[dev].class == ATA_DEV_ATA) + sata_oxnas_dev_config(&(ap->link.device[dev])); + } + + DPRINTK("EXIT\n"); +} + +/** + * Called to read the hardware registers / DMA buffers, to + * obtain the current set of taskfile register values. + * @param ap hardware with the registers in + * @param tf taskfile to read the registers into + */ +static void sata_oxnas_tf_read(struct ata_port *ap, struct ata_taskfile *tf) +{ + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *port_base = port_priv->port_base; + /* read the orb registers */ + u32 Orb1 = ioread32(port_base + ORB1); + u32 Orb2 = ioread32(port_base + ORB2); + u32 Orb3 = ioread32(port_base + ORB3); + u32 Orb4 = ioread32(port_base + ORB4); + + /* read common 28/48 bit tf parameters */ + tf->device = (Orb1 >> 24); + tf->nsect = (Orb2 >> 0); + tf->feature = (Orb2 >> 16); + tf->command = sata_oxnas_check_status(ap); + + /* read 48 or 28 bit tf parameters */ + if (tf->flags & ATA_TFLAG_LBA48) { + tf->hob_nsect = (Orb2 >> 8); + tf->lbal = (Orb3 >> 0); + tf->lbam = (Orb3 >> 8); + tf->lbah = (Orb3 >> 16); + tf->hob_lbal = (Orb3 >> 24); + tf->hob_lbam = (Orb4 >> 0); + tf->hob_lbah = (Orb4 >> 8); + /* feature ext and control are write only */ + } else { + /* read 28-bit lba */ + tf->lbal = (Orb3 >> 0); + tf->lbam = (Orb3 >> 8); + tf->lbah = (Orb3 >> 16); + } +} + +/** + * Read a result task-file from the sata core registers. + */ +static bool sata_oxnas_qc_fill_rtf(struct ata_queued_cmd *qc) +{ + /* Read the most recently received FIS from the SATA core ORB registers + and convert to an ATA taskfile */ + sata_oxnas_tf_read(qc->ap, &qc->result_tf); + return true; +} + +/** + * Reads the Status ATA shadow register from hardware. + * + * @return The status register + */ +static u8 sata_oxnas_check_status(struct ata_port *ap) +{ + u32 Reg; + u8 status; + struct sata_oxnas_port_priv *port_priv = ap->private_data; + void __iomem *port_base = port_priv->port_base; + + /* read byte 3 of Orb2 register */ + status = ioread32(port_base + ORB2) >> 24; + + /* check for the drive going missing indicated by SCR status bits + * 0-3 = 0 */ + sata_oxnas_scr_read_port(ap, SCR_STATUS, &Reg); + + if (!(Reg & 0x1)) { + status |= ATA_DF; + status |= ATA_ERR; + } + + return status; +} + +static inline void sata_oxnas_reset_ucode(struct ata_host *ah, int force, + int no_microcode) +{ + struct sata_oxnas_host_priv *hd = ah->private_data; + + DPRINTK("ENTER\n"); + if (no_microcode) { + u32 reg; + + sata_oxnas_set_mode(ah, UNKNOWN_MODE, force); + reg = ioread32(hd->core_base + DEVICE_CONTROL); + reg |= DEVICE_CONTROL_ATA_ERR_OVERRIDE; + iowrite32(reg, hd->core_base + DEVICE_CONTROL); + } else { + /* JBOD uCode */ + sata_oxnas_set_mode(ah, OXNASSATA_NOTRAID, force); + /* Turn the work around off as it may have been left on by any + * HW-RAID code that we've been working with */ + iowrite32(0x0, hd->core_base + PORT_ERROR_MASK); + } +} + +/** + * Prepare as much as possible for a command without involving anything that is + * shared between ports. + */ +static void sata_oxnas_qc_prep(struct ata_queued_cmd *qc) +{ + struct sata_oxnas_port_priv *pd; + int port_no = qc->ap->port_no; + + /* if the port's not connected, complete now with an error */ + if (!sata_oxnas_check_link(qc->ap)) { + ata_port_err(qc->ap, + "port %d not connected completing with error\n", + port_no); + qc->err_mask |= AC_ERR_ATA_BUS; + ata_qc_complete(qc); + } + + sata_oxnas_reset_ucode(qc->ap->host, 0, 0); + + /* both pio and dma commands use dma */ + if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) { + + /* program the scatterlist into the prd table */ + ata_bmdma_qc_prep(qc); + + /* point the sgdma controller at the dma request structure */ + pd = qc->ap->private_data; + + iowrite32(pd->sgdma_request_pa, + pd->sgdma_base + SGDMA_REQUESTPTR); + + /* setup the request table */ + if (port_no == 0) { + pd->sgdma_request->control = + (qc->dma_dir == DMA_FROM_DEVICE) ? + SGDMA_REQCTL0IN : SGDMA_REQCTL0OUT; + } else { + pd->sgdma_request->control = + (qc->dma_dir == DMA_FROM_DEVICE) ? + SGDMA_REQCTL1IN : SGDMA_REQCTL1OUT; + } + pd->sgdma_request->qualifier = SGDMA_REQQUAL; + pd->sgdma_request->src_pa = qc->ap->bmdma_prd_dma; + pd->sgdma_request->dst_pa = qc->ap->bmdma_prd_dma; + smp_wmb(); + + /* tell it to wait */ + iowrite32(SGDMA_CONTROL_NOGO, pd->sgdma_base + SGDMA_CONTROL); + } +} + +static int sata_oxnas_port_start(struct ata_port *ap) +{ + struct sata_oxnas_host_priv *host_priv = ap->host->private_data; + struct device *dev = ap->host->dev; + struct sata_oxnas_port_priv *pp; + void *mem; + dma_addr_t mem_dma; + + DPRINTK("ENTER\n"); + + pp = kzalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) + return -ENOMEM; + + pp->port_base = host_priv->port_base + + (ap->port_no ? PORT_SIZE : 0); + pp->dmactl_base = host_priv->dmactl_base + + (ap->port_no ? DMA_CORESIZE : 0); + pp->sgdma_base = host_priv->sgdma_base + + (ap->port_no ? SGDMA_CORESIZE : 0); + pp->core_base = host_priv->core_base; + + /* preallocated */ + if (host_priv->dma_size >= SATA_OXNAS_DMA_SIZE * host_priv->n_ports) { + DPRINTK("using preallocated DMA\n"); + mem_dma = host_priv->dma_base + + (ap->port_no ? SATA_OXNAS_DMA_SIZE : 0); + mem = ioremap(mem_dma, SATA_OXNAS_DMA_SIZE); + } else { + mem = dma_alloc_coherent(dev, SATA_OXNAS_DMA_SIZE, &mem_dma, + GFP_KERNEL); + } + if (!mem) + goto err_ret; + + pp->sgdma_request_pa = mem_dma; + pp->sgdma_request = mem; + + ap->bmdma_prd_dma = mem_dma + sizeof(struct sgdma_request); + ap->bmdma_prd = mem + sizeof(struct sgdma_request); + + ap->private_data = pp; + + sata_oxnas_post_reset_init(ap); + + return 0; + +err_ret: + kfree(pp); + return -ENOMEM; + +} + +static void sata_oxnas_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host->dev; + struct sata_oxnas_port_priv *pp = ap->private_data; + struct sata_oxnas_host_priv *host_priv = ap->host->private_data; + + DPRINTK("ENTER\n"); + ap->private_data = NULL; + if (host_priv->dma_size) { + iounmap(pp->sgdma_request); + } else { + dma_free_coherent(dev, SATA_OXNAS_DMA_SIZE, + pp->sgdma_request, pp->sgdma_request_pa); + } + + kfree(pp); +} + + +static void sata_oxnas_post_reset_init(struct ata_port *ap) +{ + uint dev; + + /* force to load u-code only once after reset */ + sata_oxnas_reset_ucode(ap->host, !ap->port_no, 0); + + /* turn on phy error detection by removing the masks */ + sata_oxnas_link_write(ap, 0x0C, 0x30003); + + /* enable hotplug event detection */ + sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0); + sata_oxnas_scr_write_port(ap, SERROR_IRQ_MASK, 0x03feffff); + sata_oxnas_scr_write_port(ap, SCR_ACTIVE, ~0 & ~(1 << 26) & ~(1 << 16)); + + /* enable interrupts for ports */ + sata_oxnas_irq_on(ap); + + /* go through all the devices and configure them */ + for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) { + if (ap->link.device[dev].class == ATA_DEV_ATA) { + sata_std_hardreset(&ap->link, NULL, jiffies + HZ); + sata_oxnas_dev_config(&(ap->link.device[dev])); + } + } + + /* clean up any remaining errors */ + sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0); + VPRINTK("done\n"); +} + +/** + * host_stop() is called when the rmmod or hot unplug process begins. The + * hook must stop all hardware interrupts, DMA engines, etc. + * + * @param ap hardware with the registers in + */ +static void sata_oxnas_host_stop(struct ata_host *host_set) +{ + DPRINTK("\n"); +} + + +#define ERROR_HW_ACQUIRE_TIMEOUT_JIFFIES (10 * HZ) +static void sata_oxnas_error_handler(struct ata_port *ap) +{ + DPRINTK("Enter port_no %d\n", ap->port_no); + sata_oxnas_freeze_host(ap); + + /* If the core is busy here, make it idle */ + sata_oxnas_cleanup(ap->host); + + ata_std_error_handler(ap); + + sata_oxnas_thaw_host(ap); +} + +static int sata_oxnas_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + struct sata_oxnas_port_priv *pd = ap->private_data; + void __iomem *port_base = pd->port_base; + int rc; + + struct ata_taskfile tf; + u32 Command_Reg; + + DPRINTK("ENTER\n"); + + port_base = pd->port_base; + + if (ata_link_offline(link)) { + DPRINTK("PHY reports no device\n"); + *class = ATA_DEV_NONE; + goto out; + } + + /* write value to register */ + iowrite32(0, port_base + ORB1); + iowrite32(0, port_base + ORB2); + iowrite32(0, port_base + ORB3); + iowrite32((ap->ctl) << 24, port_base + ORB4); + + /* command the core to send a control FIS */ + Command_Reg = ioread32(port_base + SATA_COMMAND); + Command_Reg &= ~SATA_OPCODE_MASK; + Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; + iowrite32(Command_Reg, port_base + SATA_COMMAND); + udelay(20); /* FIXME: flush */ + + /* write value to register */ + iowrite32((ap->ctl | ATA_SRST) << 24, port_base + ORB4); + + /* command the core to send a control FIS */ + Command_Reg &= ~SATA_OPCODE_MASK; + Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; + iowrite32(Command_Reg, port_base + SATA_COMMAND); + udelay(20); /* FIXME: flush */ + + /* write value to register */ + iowrite32((ap->ctl) << 24, port_base + ORB4); + + /* command the core to send a control FIS */ + Command_Reg &= ~SATA_OPCODE_MASK; + Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND; + iowrite32(Command_Reg, port_base + SATA_COMMAND); + + msleep(150); + + rc = ata_sff_wait_ready(link, deadline); + + /* if link is occupied, -ENODEV too is an error */ + if (rc && (rc != -ENODEV || sata_scr_valid(link))) { + ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc); + return rc; + } + + /* determine by signature whether we have ATA or ATAPI devices */ + sata_oxnas_tf_read(ap, &tf); + *class = ata_dev_classify(&tf); + + if (*class == ATA_DEV_UNKNOWN) + *class = ATA_DEV_NONE; + +out: + DPRINTK("EXIT, class=%u\n", *class); + return 0; +} + + +int sata_oxnas_init_controller(struct ata_host *host) +{ + return 0; +} + +/** + * Ref bug-6320 + * + * This code is a work around for a DMA hardware bug that will repeat the + * penultimate 8-bytes on some reads. This code will check that the amount + * of data transferred is a multiple of 512 bytes, if not the in it will + * fetch the correct data from a buffer in the SATA core and copy it into + * memory. + * + * @param port SATA port to check and if necessary, correct. + */ +static int sata_oxnas_bug_6320_detect(struct ata_port *ap) +{ + struct sata_oxnas_port_priv *pd = ap->private_data; + void __iomem *core_base = pd->core_base; + int is_read; + int quads_transferred; + int remainder; + int sector_quads_remaining; + int bug_present = 0; + + /* Only want to apply fix to reads */ + is_read = !(ioread32(core_base + DM_DBG1) & (ap->port_no ? + BIT(CORE_PORT1_DATA_DIR_BIT) : + BIT(CORE_PORT0_DATA_DIR_BIT))); + + /* Check for an incomplete transfer, i.e. not a multiple of 512 bytes + transferred (datacount_port register counts quads transferred) */ + quads_transferred = + ioread32(core_base + (ap->port_no ? + DATACOUNT_PORT1 : DATACOUNT_PORT0)); + + remainder = quads_transferred & 0x7f; + sector_quads_remaining = remainder ? (0x80 - remainder) : 0; + + if (is_read && (sector_quads_remaining == 2)) { + bug_present = 1; + } else if (sector_quads_remaining) { + if (is_read) { + ata_port_warn(ap, "SATA read fixup cannot deal with " + "%d quads remaining\n", + sector_quads_remaining); + } else { + ata_port_warn(ap, "SATA write fixup of %d quads " + "remaining not supported\n", + sector_quads_remaining); + } + } + + return bug_present; +} + +/* This port done an interrupt */ +static void sata_oxnas_port_irq(struct ata_port *ap, int force_error) +{ + struct ata_queued_cmd *qc; + struct sata_oxnas_port_priv *pd = ap->private_data; + void __iomem *port_base = pd->port_base; + + u32 int_status; + unsigned long flags = 0; + + DPRINTK("ENTER port %d irqstatus %x\n", ap->port_no, + ioread32(port_base + INT_STATUS)); + + if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) { + qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); + DPRINTK("completing non-ncq cmd\n"); + + if (qc) + ata_qc_complete(qc); + + return; + } + + qc = ata_qc_from_tag(ap, ap->link.active_tag); + + + /* record the port's interrupt */ + int_status = ioread32(port_base + INT_STATUS); + + /* If there's no command associated with this IRQ, ignore it. We may get + * spurious interrupts when cleaning-up after a failed command, ignore + * these too. */ + if (likely(qc)) { + /* get the status before any error cleanup */ + qc->err_mask = ac_err_mask(sata_oxnas_check_status(ap)); + if (force_error) { + /* Pretend there has been a link error */ + qc->err_mask |= AC_ERR_ATA_BUS; + DPRINTK(" ####force error####\n"); + } + /* tell libata we're done */ + local_irq_save(flags); + sata_oxnas_irq_clear(ap); + local_irq_restore(flags); + ata_qc_complete(qc); + } else { + VPRINTK("Ignoring interrupt, can't find the command tag=" + "%d %08x\n", ap->link.active_tag, ap->qc_active); + } + + /* maybe a hotplug event */ + if (unlikely(int_status & INT_LINK_SERROR)) { + u32 serror; + + sata_oxnas_scr_read_port(ap, SCR_ERROR, &serror); + if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) { + ata_ehi_hotplugged(&ap->link.eh_info); + ata_port_freeze(ap); + } + } +} + +/** + * irq_handler is the interrupt handling routine registered with the system, + * by libata. + */ +static irqreturn_t sata_oxnas_interrupt(int irq, void *dev_instance) +{ + struct ata_host *ah = dev_instance; + struct sata_oxnas_host_priv *hd = ah->private_data; + void __iomem *core_base = hd->core_base; + + u32 int_status; + irqreturn_t ret = IRQ_NONE; + u32 port_no; + u32 mask; + int bug_present; + + /* loop until there are no more interrupts */ + while ((int_status = (ioread32(core_base + CORE_INT_STATUS)) & + (COREINT_END | (COREINT_END << 1)))) { + + /* clear any interrupt */ + iowrite32(int_status, core_base + CORE_INT_CLEAR); + + /* Only need workaround_bug_6320 for single disk systems as dual + * disk will use uCode which prevents this read underrun problem + * from occurring. + * All single disk systems will use port 0 */ + for (port_no = 0; port_no < hd->n_ports; ++port_no) { + /* check the raw end of command interrupt to see if the + * port is done */ + mask = (COREINT_END << port_no); + if (!(int_status & mask)) + continue; + + /* this port had an interrupt, clear it */ + iowrite32(mask, core_base + CORE_INT_CLEAR); + /* check for bug 6320 only if no microcode was loaded */ + bug_present = (hd->current_ucode == UNKNOWN_MODE) && + sata_oxnas_bug_6320_detect(ah->ports[port_no]); + + sata_oxnas_port_irq(ah->ports[port_no], + bug_present); + ret = IRQ_HANDLED; + } + } + + return ret; +} + +/* + * scsi mid-layer and libata interface structures + */ +static struct scsi_host_template sata_oxnas_sht = { + ATA_NCQ_SHT("sata_oxnas"), + .can_queue = SATA_OXNAS_QUEUE_DEPTH, + .sg_tablesize = SATA_OXNAS_MAX_PRD, + .dma_boundary = ATA_DMA_BOUNDARY, + .unchecked_isa_dma = 0, +}; + + +static struct ata_port_operations sata_oxnas_ops = { + .inherits = &sata_port_ops, + .qc_prep = sata_oxnas_qc_prep, + .qc_issue = sata_oxnas_qc_issue, + .qc_fill_rtf = sata_oxnas_qc_fill_rtf, + .qc_new = sata_oxnas_qc_new, + .qc_free = sata_oxnas_qc_free, + + .scr_read = sata_oxnas_scr_read, + .scr_write = sata_oxnas_scr_write, + + .freeze = sata_oxnas_freeze, + .thaw = sata_oxnas_thaw, + .softreset = sata_oxnas_softreset, + /* .hardreset = sata_oxnas_hardreset, */ + .postreset = sata_oxnas_postreset, + .error_handler = sata_oxnas_error_handler, + .post_internal_cmd = sata_oxnas_post_internal_cmd, + + .port_start = sata_oxnas_port_start, + .port_stop = sata_oxnas_port_stop, + + .host_stop = sata_oxnas_host_stop, + /* .pmp_attach = sata_oxnas_pmp_attach, */ + /* .pmp_detach = sata_oxnas_pmp_detach, */ + .sff_check_status = sata_oxnas_check_status, + .acquire_hw = sata_oxnas_acquire_hw, +}; + +static const struct ata_port_info sata_oxnas_port_info = { + .flags = SATA_OXNAS_HOST_FLAGS, + .pio_mask = ATA_PIO4, + .udma_mask = ATA_UDMA6, + .port_ops = &sata_oxnas_ops, +}; + +static int sata_oxnas_probe(struct platform_device *ofdev) +{ + int retval = -ENXIO; + int n_ports = 0; + void __iomem *port_base = NULL; + void __iomem *dmactl_base = NULL; + void __iomem *sgdma_base = NULL; + void __iomem *core_base = NULL; + void __iomem *phy_base = NULL; + struct reset_control *rstc; + + struct resource res = {}; + struct sata_oxnas_host_priv *host_priv = NULL; + int irq = 0; + struct ata_host *host = NULL; + struct clk *clk = NULL; + + const struct ata_port_info *ppi[] = { &sata_oxnas_port_info, NULL }; + + of_property_read_u32(ofdev->dev.of_node, "nr-ports", &n_ports); + if (n_ports < 1 || n_ports > SATA_OXNAS_MAX_PORTS) + goto error_exit_with_cleanup; + + port_base = of_iomap(ofdev->dev.of_node, 0); + if (!port_base) + goto error_exit_with_cleanup; + + dmactl_base = of_iomap(ofdev->dev.of_node, 1); + if (!dmactl_base) + goto error_exit_with_cleanup; + + sgdma_base = of_iomap(ofdev->dev.of_node, 2); + if (!sgdma_base) + goto error_exit_with_cleanup; + + core_base = of_iomap(ofdev->dev.of_node, 3); + if (!core_base) + goto error_exit_with_cleanup; + + phy_base = of_iomap(ofdev->dev.of_node, 4); + if (!phy_base) + goto error_exit_with_cleanup; + + host_priv = devm_kzalloc(&ofdev->dev, + sizeof(struct sata_oxnas_host_priv), + GFP_KERNEL); + if (!host_priv) + goto error_exit_with_cleanup; + + host_priv->port_base = port_base; + host_priv->dmactl_base = dmactl_base; + host_priv->sgdma_base = sgdma_base; + host_priv->core_base = core_base; + host_priv->phy_base = phy_base; + host_priv->n_ports = n_ports; + host_priv->current_ucode = UNKNOWN_MODE; + + if (!of_address_to_resource(ofdev->dev.of_node, 5, &res)) { + host_priv->dma_base = res.start; + host_priv->dma_size = resource_size(&res); + } + + irq = irq_of_parse_and_map(ofdev->dev.of_node, 0); + if (!irq) { + dev_err(&ofdev->dev, "invalid irq from platform\n"); + goto error_exit_with_cleanup; + } + host_priv->irq = irq; + + clk = of_clk_get(ofdev->dev.of_node, 0); + if (IS_ERR(clk)) { + retval = PTR_ERR(clk); + clk = NULL; + goto error_exit_with_cleanup; + } + host_priv->clk = clk; + + rstc = devm_reset_control_get(&ofdev->dev, "sata"); + if (IS_ERR(rstc)) { + retval = PTR_ERR(rstc); + goto error_exit_with_cleanup; + } + host_priv->rst_sata = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "link"); + if (IS_ERR(rstc)) { + retval = PTR_ERR(rstc); + goto error_exit_with_cleanup; + } + host_priv->rst_link = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "phy"); + if (IS_ERR(rstc)) { + retval = PTR_ERR(rstc); + goto error_exit_with_cleanup; + } + host_priv->rst_phy = rstc; + + /* allocate host structure */ + host = ata_host_alloc_pinfo(&ofdev->dev, ppi, n_ports); + + if (!host) { + retval = -ENOMEM; + goto error_exit_with_cleanup; + } + host->private_data = host_priv; + host->iomap = port_base; + + /* initialize core locking and queues */ + init_waitqueue_head(&host_priv->fast_wait_queue); + init_waitqueue_head(&host_priv->scsi_wait_queue); + spin_lock_init(&host_priv->phy_lock); + spin_lock_init(&host_priv->core_lock); + host_priv->core_locked = 0; + host_priv->reentrant_port_no = -1; + host_priv->hw_lock_count = 0; + host_priv->direct_lock_count = 0; + host_priv->locker_uid = 0; + host_priv->current_locker_type = SATA_UNLOCKED; + host_priv->isr_arg = NULL; + host_priv->isr_callback = NULL; + + /* initialize host controller */ + retval = sata_oxnas_init_controller(host); + if (retval) + goto error_exit_with_cleanup; + + /* + * Now, register with libATA core, this will also initiate the + * device discovery process, invoking our port_start() handler & + * error_handler() to execute a dummy softreset EH session + */ + ata_host_activate(host, irq, sata_oxnas_interrupt, SATA_OXNAS_IRQ_FLAG, + &sata_oxnas_sht); + + return 0; + +error_exit_with_cleanup: + if (irq) + irq_dispose_mapping(host_priv->irq); + if (clk) + clk_put(clk); + if (host) + ata_host_detach(host); + if (port_base) + iounmap(port_base); + if (sgdma_base) + iounmap(sgdma_base); + if (core_base) + iounmap(core_base); + if (phy_base) + iounmap(phy_base); + return retval; +} + + +static int sata_oxnas_remove(struct platform_device *ofdev) +{ + struct ata_host *host = dev_get_drvdata(&ofdev->dev); + struct sata_oxnas_host_priv *host_priv = host->private_data; + + ata_host_detach(host); + + irq_dispose_mapping(host_priv->irq); + iounmap(host_priv->port_base); + iounmap(host_priv->sgdma_base); + iounmap(host_priv->core_base); + + /* reset Controller, Link and PHY */ + reset_control_assert(host_priv->rst_sata); + reset_control_assert(host_priv->rst_link); + reset_control_assert(host_priv->rst_phy); + + /* Disable the clock to the SATA block */ + clk_disable_unprepare(host_priv->clk); + clk_put(host_priv->clk); + + return 0; +} + +#ifdef CONFIG_PM +static int sata_oxnas_suspend(struct platform_device *op, pm_message_t state) +{ + struct ata_host *host = dev_get_drvdata(&op->dev); + + return ata_host_suspend(host, state); +} + +static int sata_oxnas_resume(struct platform_device *op) +{ + struct ata_host *host = dev_get_drvdata(&op->dev); + int ret; + + ret = sata_oxnas_init_controller(host); + if (ret) { + dev_err(&op->dev, "Error initializing hardware\n"); + return ret; + } + ata_host_resume(host); + return 0; +} +#endif + + + +static struct of_device_id oxnas_sata_match[] = { + { + .compatible = "plxtech,nas782x-sata", + }, + {}, +}; + +MODULE_DEVICE_TABLE(of, oxnas_sata_match); + +static struct platform_driver oxnas_sata_driver = { + .driver = { + .name = "oxnas-sata", + .owner = THIS_MODULE, + .of_match_table = oxnas_sata_match, + }, + .probe = sata_oxnas_probe, + .remove = sata_oxnas_remove, +#ifdef CONFIG_PM + .suspend = sata_oxnas_suspend, + .resume = sata_oxnas_resume, +#endif +}; + +module_platform_driver(oxnas_sata_driver); + +MODULE_LICENSE("GPL"); +MODULE_VERSION("1.0"); +MODULE_AUTHOR("Oxford Semiconductor Ltd."); +MODULE_DESCRIPTION("low-level driver for Oxford 934 SATA core"); diff --git a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c new file mode 100644 index 0000000000..7cf3ad1670 --- /dev/null +++ b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c @@ -0,0 +1,946 @@ +/* + * PCIe driver for PLX NAS782X SoCs + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/clk.h> +#include <linux/module.h> +#include <linux/mbus.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/of_address.h> +#include <linux/of_pci.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/reset.h> +#include <linux/io.h> +#include <linux/sizes.h> + +#define OXNAS_UART1_BASE 0x44200000 +#define OXNAS_UART1_SIZE SZ_32 +#define OXNAS_UART1_BASE_VA 0xF0000000 + +#define OXNAS_UART2_BASE 0x44300000 +#define OXNAS_UART2_SIZE SZ_32 + +#define OXNAS_PERCPU_BASE 0x47000000 +#define OXNAS_PERCPU_SIZE SZ_8K +#define OXNAS_PERCPU_BASE_VA 0xF0002000 + +#define OXNAS_SYSCRTL_BASE 0x44E00000 +#define OXNAS_SYSCRTL_SIZE SZ_4K +#define OXNAS_SYSCRTL_BASE_VA 0xF0004000 + +#define OXNAS_SECCRTL_BASE 0x44F00000 +#define OXNAS_SECCRTL_SIZE SZ_4K +#define OXNAS_SECCRTL_BASE_VA 0xF0005000 + +#define OXNAS_RPSA_BASE 0x44400000 +#define OXNAS_RPSA_SIZE SZ_4K +#define OXNAS_RPSA_BASE_VA 0xF0006000 + +#define OXNAS_RPSC_BASE 0x44500000 +#define OXNAS_RPSC_SIZE SZ_4K +#define OXNAS_RPSC_BASE_VA 0xF0007000 + + +/* + * Location of flags and vectors in SRAM for controlling the booting of the + * secondary ARM11 processors. + */ + +#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA +#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100) + +#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) +#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) + +/** + * System block reset and clock control + */ +#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20) +#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24) +#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C) +#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30) +#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34) +#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38) + +#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48) +#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64) +#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C) +#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78) +#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100) + +/* Scratch registers */ +#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4) +#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8) +#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc) +#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0) + +#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0) +#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4) +#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8) +#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC) + +#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40) +#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44) +#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8) +#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84) +#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90) + +/* pcie */ +#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114) + +/* System control multi-function pin function selection */ +#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14) +#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c) +#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94) +#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c) +#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4) +#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac) + +/* Secure control multi-function pin function selection */ +#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14) +#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c) +#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94) +#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c) +#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4) +#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac) + +#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68) +#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98) +#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0) +#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8) +#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0) +#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) +#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4) + +#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10) +#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108) +#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C) +#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC) + +#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10) +#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108) +#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C) +#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC) + +#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224) + +#define REF300_DIV_INT_SHIFT 8 +#define REF300_DIV_FRAC_SHIFT 0 +#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) +#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) + +#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 +#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 +#define USBHSPHY_ATE_ESET 14 +#define USBHSPHY_TEST_DIN 6 +#define USBHSPHY_TEST_ADD 2 +#define USBHSPHY_TEST_DOUT_SEL 1 +#define USBHSPHY_TEST_CLK 0 + +#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 +#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) + +#define USBAMUX_DEVICE BIT(4) + +#define USBPHY_REFCLKDIV_SHIFT 2 +#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) + +#define USB_CTRL_USB_CKO_SEL_BIT 0 + +#define USB_INT_CLK_XTAL 0 +#define USB_INT_CLK_REF300 2 +#define USB_INT_CLK_PLLB 3 + +#define SYS_CTRL_GMAC_CKEN_RX_IN 14 +#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13 +#define SYS_CTRL_GMAC_CKEN_RX_OUT 12 +#define SYS_CTRL_GMAC_CKEN_TX_IN 10 +#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9 +#define SYS_CTRL_GMAC_CKEN_TX_OUT 8 +#define SYS_CTRL_GMAC_RX_SOURCE 7 +#define SYS_CTRL_GMAC_TX_SOURCE 6 +#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4 +#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3 +#define SYS_CTRL_GMAC_RGMII 2 +#define SYS_CTRL_GMAC_SIMPLE_MUX 1 +#define SYS_CTRL_GMAC_CKEN_GTX 0 +#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0 +#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8 +#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16 +#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24 +#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT) +#define SYS_CTRL_GMAC_TXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT) +#define SYS_CTRL_GMAC_RX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT) +#define SYS_CTRL_GMAC_RXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT) + +#define PLLB_BYPASS 1 +#define PLLB_ENSAT 3 +#define PLLB_OUTDIV 4 +#define PLLB_REFDIV 8 +#define PLLB_DIV_INT_SHIFT 8 +#define PLLB_DIV_FRAC_SHIFT 0 +#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) +#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) + +#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0 +#define SYS_CTRL_CKCTRL_SLOW_BIT 8 + +#define SYS_CTRL_UART2_DEQ_EN 0 +#define SYS_CTRL_UART3_DEQ_EN 1 +#define SYS_CTRL_UART3_IQ_EN 2 +#define SYS_CTRL_UART4_IQ_EN 3 +#define SYS_CTRL_UART4_NOT_PCI_MODE 4 + +#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT 11 + +#define PLLA_REFDIV_MASK 0x3F +#define PLLA_REFDIV_SHIFT 8 +#define PLLA_OUTDIV_MASK 0x7 +#define PLLA_OUTDIV_SHIFT 4 + +/* bit numbers of clock control register */ +#define SYS_CTRL_CLK_COPRO 0 +#define SYS_CTRL_CLK_DMA 1 +#define SYS_CTRL_CLK_CIPHER 2 +#define SYS_CTRL_CLK_SD 3 +#define SYS_CTRL_CLK_SATA 4 +#define SYS_CTRL_CLK_I2S 5 +#define SYS_CTRL_CLK_USBHS 6 +#define SYS_CTRL_CLK_MACA 7 +#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA +#define SYS_CTRL_CLK_PCIEA 8 +#define SYS_CTRL_CLK_STATIC 9 +#define SYS_CTRL_CLK_MACB 10 +#define SYS_CTRL_CLK_PCIEB 11 +#define SYS_CTRL_CLK_REF600 12 +#define SYS_CTRL_CLK_USBDEV 13 +#define SYS_CTRL_CLK_DDR 14 +#define SYS_CTRL_CLK_DDRPHY 15 +#define SYS_CTRL_CLK_DDRCK 16 + + +/* bit numbers of reset control register */ +#define SYS_CTRL_RST_SCU 0 +#define SYS_CTRL_RST_COPRO 1 +#define SYS_CTRL_RST_ARM0 2 +#define SYS_CTRL_RST_ARM1 3 +#define SYS_CTRL_RST_USBHS 4 +#define SYS_CTRL_RST_USBHSPHYA 5 +#define SYS_CTRL_RST_MACA 6 +#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA +#define SYS_CTRL_RST_PCIEA 7 +#define SYS_CTRL_RST_SGDMA 8 +#define SYS_CTRL_RST_CIPHER 9 +#define SYS_CTRL_RST_DDR 10 +#define SYS_CTRL_RST_SATA 11 +#define SYS_CTRL_RST_SATA_LINK 12 +#define SYS_CTRL_RST_SATA_PHY 13 +#define SYS_CTRL_RST_PCIEPHY 14 +#define SYS_CTRL_RST_STATIC 15 +#define SYS_CTRL_RST_GPIO 16 +#define SYS_CTRL_RST_UART1 17 +#define SYS_CTRL_RST_UART2 18 +#define SYS_CTRL_RST_MISC 19 +#define SYS_CTRL_RST_I2S 20 +#define SYS_CTRL_RST_SD 21 +#define SYS_CTRL_RST_MACB 22 +#define SYS_CTRL_RST_PCIEB 23 +#define SYS_CTRL_RST_VIDEO 24 +#define SYS_CTRL_RST_DDR_PHY 25 +#define SYS_CTRL_RST_USBHSPHYB 26 +#define SYS_CTRL_RST_USBDEV 27 +#define SYS_CTRL_RST_ARMDBG 29 +#define SYS_CTRL_RST_PLLA 30 +#define SYS_CTRL_RST_PLLB 31 + +static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val &= ~mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask) +{ + u32 val = readl_relaxed(p); + + val |= mask; + writel_relaxed(val, p); +} + +static inline void oxnas_register_value_mask(void __iomem *p, + unsigned mask, unsigned new_value) +{ + /* TODO sanity check mask & new_value = new_value */ + u32 val = readl_relaxed(p); + + val &= ~mask; + val |= new_value; + writel_relaxed(val, p); +} + +#define VERSION_ID_MAGIC 0x082510b5 +#define LINK_UP_TIMEOUT_SECONDS 1 +#define NUM_CONTROLLERS 1 + +enum { + PCIE_DEVICE_TYPE_MASK = 0x0F, + PCIE_DEVICE_TYPE_ENDPOINT = 0, + PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1, + PCIE_DEVICE_TYPE_ROOT = 4, + + PCIE_LTSSM = BIT(4), + PCIE_READY_ENTR_L23 = BIT(9), + PCIE_LINK_UP = BIT(11), + PCIE_OBTRANS = BIT(12), +}; + +enum { + HCSL_BIAS_ON = BIT(0), + HCSL_PCIE_EN = BIT(1), + HCSL_PCIEA_EN = BIT(2), + HCSL_PCIEB_EN = BIT(3), +}; + +enum { + /* pcie phy reg offset */ + PHY_ADDR = 0, + PHY_DATA = 4, + /* phy data reg bits */ + READ_EN = BIT(16), + WRITE_EN = BIT(17), + CAP_DATA = BIT(18), +}; + +/* core config registers */ +enum { + PCI_CONFIG_VERSION_DEVICEID = 0, + PCI_CONFIG_COMMAND_STATUS = 4, +}; + +/* inbound config registers */ +enum { + IB_ADDR_XLATE_ENABLE = 0xFC, + + /* bits */ + ENABLE_IN_ADDR_TRANS = BIT(0), +}; + +/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */ +enum { + PCIE_POM0_MEM_ADDR = 0, + PCIE_POM1_MEM_ADDR = 4, + PCIE_IN0_MEM_ADDR = 8, + PCIE_IN1_MEM_ADDR = 12, + PCIE_IN_IO_ADDR = 16, + PCIE_IN_CFG0_ADDR = 20, + PCIE_IN_CFG1_ADDR = 24, + PCIE_IN_MSG_ADDR = 28, + PCIE_IN0_MEM_LIMIT = 32, + PCIE_IN1_MEM_LIMIT = 36, + PCIE_IN_IO_LIMIT = 40, + PCIE_IN_CFG0_LIMIT = 44, + PCIE_IN_CFG1_LIMIT = 48, + PCIE_IN_MSG_LIMIT = 52, + PCIE_AHB_SLAVE_CTRL = 56, + + PCIE_SLAVE_BE_SHIFT = 22, +}; + +#define ADDR_VAL(val) ((val) & 0xFFFF) +#define DATA_VAL(val) ((val) & 0xFFFF) + +#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT) +#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF) + +struct oxnas_pcie_shared { + /* seems all access are serialized, no lock required */ + int refcount; +}; + +/* Structure representing one PCIe interfaces */ +struct oxnas_pcie { + void __iomem *cfgbase; + void __iomem *base; + void __iomem *inbound; + void __iomem *outbound; + void __iomem *pcie_ctrl; + + int haslink; + struct platform_device *pdev; + struct resource io; + struct resource cfg; + struct resource pre_mem; /* prefetchable */ + struct resource non_mem; /* non-prefetchable */ + struct resource busn; /* max available bus numbers */ + int card_reset; /* gpio pin, optional */ + unsigned hcsl_en; /* hcsl pci enable bit */ + struct clk *clk; + struct clk *busclk; /* for pcie bus, actually the PLLB */ + void *private_data[1]; + spinlock_t lock; +}; + +static struct oxnas_pcie_shared pcie_shared = { + .refcount = 0, +}; + +static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys) +{ + return sys->private_data; +} + + +static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes) +{ + oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL, + PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes)); + wmb(); +} + +static int oxnas_pcie_link_up(struct oxnas_pcie *pcie) +{ + unsigned long end; + + /* Poll for PCIE link up */ + end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ); + while (!time_after(jiffies, end)) { + if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP) + return 1; + } + return 0; +} + +static void __init oxnas_pcie_setup_hw(struct oxnas_pcie *pcie) +{ + /* We won't have any inbound address translation. This allows PCI + * devices to access anywhere in the AHB address map. Might be regarded + * as a bit dangerous, but let's get things working before we worry + * about that + */ + oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE, + ENABLE_IN_ADDR_TRANS); + wmb(); + + /* + * Program outbound translation windows + * + * Outbound window is what is referred to as "PCI client" region in HRM + * + * Could use the larger alternative address space to get >>64M regions + * for graphics cards etc., but will not bother at this point. + * + * IP bug means that AMBA window size must be a power of 2 + * + * Set mem0 window for first 16MB of outbound window non-prefetchable + * Set mem1 window for second 16MB of outbound window prefetchable + * Set io window for next 16MB of outbound window + * Set cfg0 for final 1MB of outbound window + * + * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for + * 820 that would need them + * + * Probably ideally want no offset between mem0 window start as seen by + * ARM and as seen on PCI bus and get Linux to assign memory regions to + * PCI devices using the same "PCI client" region start address as seen + * by ARM + */ + + /* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */ + writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR); + writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT); + writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR); + + /* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */ + writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR); + writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT); + writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR); + + /* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/ + writel_relaxed(pcie->io.start, pcie->outbound + PCIE_IN_IO_ADDR); + writel_relaxed(pcie->io.end, pcie->outbound + PCIE_IN_IO_LIMIT); + + /* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/ + writel_relaxed(pcie->cfg.start, pcie->outbound + PCIE_IN_CFG0_ADDR); + writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT); + wmb(); + + /* Enable outbound address translation */ + oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS); + wmb(); + + /* + * Program PCIe command register for core to: + * enable memory space + * enable bus master + * enable io + */ + writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS); + /* which is which */ + wmb(); +} + +static unsigned oxnas_pcie_cfg_to_offset( + struct pci_sys_data *sys, + unsigned char bus_number, + unsigned int devfn, + int where) +{ + unsigned int function = PCI_FUNC(devfn); + unsigned int slot = PCI_SLOT(devfn); + unsigned char bus_number_offset; + + bus_number_offset = bus_number - sys->busnr; + + /* + * We'll assume for now that the offset, function, slot, bus encoding + * should map onto linear, contiguous addresses in PCIe config space, + * albeit that the majority will be unused as only slot 0 is valid for + * any PCIe bus and most devices have only function 0 + * + * Could be that PCIe in fact works by not encoding the slot number into + * the config space address as it's known that only slot 0 is valid. + * We'll have to experiment if/when we get a PCIe switch connected to + * the PCIe host + */ + return (bus_number_offset << 20) | (slot << 15) | (function << 12) | + (where & ~3); +} + +/* PCI configuration space write function */ +static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn, + int where, int size, u32 val) +{ + unsigned long flags; + struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata); + unsigned offset; + u32 value; + u32 lanes; + + /* Only a single device per bus for PCIe point-to-point links */ + if (PCI_SLOT(devfn) > 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + if (!pcie->haslink) + return PCIBIOS_DEVICE_NOT_FOUND; + + offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn, + where); + + value = val << (8 * (where & 3)); + lanes = (0xf >> (4-size)) << (where & 3); + /* it race with mem and io write, but the possibility is low, normally + * all config writes happens at driver initialize stage, wont interleave + * with others. + * and many pcie cards use dword (4bytes) access mem/io access only, + * so not bother to copy that ugly work-around now. */ + spin_lock_irqsave(&pcie->lock, flags); + set_out_lanes(pcie, lanes); + writel_relaxed(value, pcie->cfgbase + offset); + set_out_lanes(pcie, 0xf); + spin_unlock_irqrestore(&pcie->lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +/* PCI configuration space read function */ +static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where, + int size, u32 *val) +{ + struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata); + unsigned offset; + u32 value; + u32 left_bytes, right_bytes; + + /* Only a single device per bus for PCIe point-to-point links */ + if (PCI_SLOT(devfn) > 0) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + if (!pcie->haslink) { + *val = 0xffffffff; + return PCIBIOS_DEVICE_NOT_FOUND; + } + + offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn, + where); + value = readl_relaxed(pcie->cfgbase + offset); + left_bytes = where & 3; + right_bytes = 4 - left_bytes - size; + value <<= right_bytes * 8; + value >>= (left_bytes + right_bytes) * 8; + *val = value; + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops oxnas_pcie_ops = { + .read = oxnas_pcie_rd_conf, + .write = oxnas_pcie_wr_conf, +}; + +static int __init oxnas_pcie_setup(int nr, struct pci_sys_data *sys) +{ + struct oxnas_pcie *pcie = sys_to_pcie(sys); + + pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset); + pci_add_resource(&sys->resources, &pcie->busn); + if (sys->busnr == 0) { /* default one */ + sys->busnr = pcie->busn.start; + } + /* do not use devm_ioremap_resource, it does not like cfg resource */ + pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start, + resource_size(&pcie->cfg)); + if (!pcie->cfgbase) + return -ENOMEM; + + oxnas_pcie_setup_hw(pcie); + + return 1; +} + +static void __init oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie) +{ + struct hw_pci hw; + int i; + + memset(&hw, 0, sizeof(hw)); + for (i = 0; i < NUM_CONTROLLERS; i++) + pcie->private_data[i] = pcie; + + hw.nr_controllers = NUM_CONTROLLERS; +/* I think use stack pointer is a bad idea though it is valid in this case */ + hw.private_data = pcie->private_data; + hw.setup = oxnas_pcie_setup; + hw.map_irq = of_irq_parse_and_map_pci; + hw.ops = &oxnas_pcie_ops; + + /* pass dev to maintain of tree, interrupt mapping rely on this */ + pci_common_init_dev(dev, &hw); +} + +void oxnas_pcie_init_shared_hw(struct platform_device *pdev, + void __iomem *phybase) +{ + struct reset_control *rstc; + int ret; + + /* generate clocks from HCSL buffers, shared parts */ + writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL); + + /* Ensure PCIe PHY is properly reset */ + rstc = reset_control_get(&pdev->dev, "phy"); + if (IS_ERR(rstc)) { + ret = PTR_ERR(rstc); + } else { + ret = reset_control_reset(rstc); + reset_control_put(rstc); + } + + if (ret) { + dev_err(&pdev->dev, "phy reset failed %d\n", ret); + return; + } + + /* Enable PCIe Pre-Emphasis: What these value means? */ + + writel(ADDR_VAL(0x0014), phybase + PHY_ADDR); + writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA); + writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA); + + writel(ADDR_VAL(0x2004), phybase + PHY_ADDR); + writel(DATA_VAL(0x82c7) | CAP_DATA, phybase + PHY_DATA); + writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA); +} + +static int oxnas_pcie_shared_init(struct platform_device *pdev) +{ + if (++pcie_shared.refcount == 1) { + /* we are the first */ + struct device_node *np = pdev->dev.of_node; + void __iomem *phy = of_iomap(np, 2); + if (!phy) { + --pcie_shared.refcount; + return -ENOMEM; + } + oxnas_pcie_init_shared_hw(pdev, phy); + iounmap(phy); + return 0; + } else { + return 0; + } +} + +#if 0 +/* maybe we will call it when enter low power state */ +static void oxnas_pcie_shared_deinit(struct platform_device *pdev) +{ + if (--pcie_shared.refcount == 0) { + /* no cleanup needed */; + } +} +#endif + +static int __init +oxnas_pcie_map_registers(struct platform_device *pdev, + struct device_node *np, + struct oxnas_pcie *pcie) +{ + struct resource regs; + int ret = 0; + u32 outbound_ctrl_offset; + u32 pcie_ctrl_offset; + + /* 2 is reserved for shared phy */ + ret = of_address_to_resource(np, 0, ®s); + if (ret) + return -EINVAL; + pcie->base = devm_ioremap_resource(&pdev->dev, ®s); + if (!pcie->base) + return -ENOMEM; + + ret = of_address_to_resource(np, 1, ®s); + if (ret) + return -EINVAL; + pcie->inbound = devm_ioremap_resource(&pdev->dev, ®s); + if (!pcie->inbound) + return -ENOMEM; + + + if (of_property_read_u32(np, "plxtech,pcie-outbound-offset", + &outbound_ctrl_offset)) + return -EINVAL; + /* SYSCRTL is shared by too many drivers, so is mapped by board file */ + pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset); + + if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset", + &pcie_ctrl_offset)) + return -EINVAL; + pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset); + + return 0; +} + +static int __init oxnas_pcie_init_res(struct platform_device *pdev, + struct oxnas_pcie *pcie, + struct device_node *np) +{ + struct of_pci_range range; + struct of_pci_range_parser parser; + int ret; + + if (of_pci_range_parser_init(&parser, np)) + return -EINVAL; + + /* Get the I/O and memory ranges from DT */ + for_each_of_pci_range(&parser, &range) { + + unsigned long restype = range.flags & IORESOURCE_TYPE_BITS; + if (restype == IORESOURCE_IO) { + of_pci_range_to_resource(&range, np, &pcie->io); + pcie->io.name = "I/O"; + } + if (restype == IORESOURCE_MEM) { + if (range.flags & IORESOURCE_PREFETCH) { + of_pci_range_to_resource(&range, np, &pcie->pre_mem); + pcie->pre_mem.name = "PRE MEM"; + } else { + of_pci_range_to_resource(&range, np, &pcie->non_mem); + pcie->non_mem.name = "NON MEM"; + } + + } + if (restype == 0) + of_pci_range_to_resource(&range, np, &pcie->cfg); + } + + /* Get the bus range */ + ret = of_pci_parse_bus_range(np, &pcie->busn); + + if (ret) { + dev_err(&pdev->dev, "failed to parse bus-range property: %d\n", + ret); + return ret; + } + + pcie->card_reset = of_get_gpio(np, 0); + if (pcie->card_reset < 0) + dev_info(&pdev->dev, "card reset gpio pin not exists\n"); + + if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en)) + return -EINVAL; + + pcie->clk = of_clk_get_by_name(np, "pcie"); + if (IS_ERR(pcie->clk)) { + return PTR_ERR(pcie->clk); + } + + pcie->busclk = of_clk_get_by_name(np, "busclk"); + if (IS_ERR(pcie->busclk)) { + clk_put(pcie->clk); + return PTR_ERR(pcie->busclk); + } + + return 0; +} + +static void oxnas_pcie_init_hw(struct platform_device *pdev, + struct oxnas_pcie *pcie) +{ + u32 version_id; + int ret; + + clk_prepare_enable(pcie->busclk); + + /* reset PCIe cards use hard-wired gpio pin */ + if (pcie->card_reset >= 0 && + !gpio_direction_output(pcie->card_reset, 0)) { + wmb(); + mdelay(10); + /* must tri-state the pin to pull it up */ + gpio_direction_input(pcie->card_reset); + wmb(); + mdelay(100); + } + + oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en)); + + /* core */ + ret = device_reset(&pdev->dev); + if (ret) { + dev_err(&pdev->dev, "core reset failed %d\n", ret); + return; + } + + /* Start PCIe core clocks */ + clk_prepare_enable(pcie->clk); + + version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID); + dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id); + + if (version_id != VERSION_ID_MAGIC) { + dev_info(&pdev->dev, "PCIe controller not found\n"); + pcie->haslink = 0; + return; + } + + /* allow entry to L23 state */ + oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23); + + /* Set PCIe core into RootCore mode */ + oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK, + PCIE_DEVICE_TYPE_ROOT); + wmb(); + + /* Bring up the PCI core */ + oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM); + wmb(); +} + +static int __init oxnas_pcie_probe(struct platform_device *pdev) +{ + struct oxnas_pcie *pcie; + struct device_node *np = pdev->dev.of_node; + int ret; + + pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie), + GFP_KERNEL); + if (!pcie) + return -ENOMEM; + + pcie->pdev = pdev; + pcie->haslink = 1; + spin_lock_init(&pcie->lock); + + ret = oxnas_pcie_init_res(pdev, pcie, np); + if (ret) + return ret; + if (pcie->card_reset >= 0) { + ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN, + dev_name(&pdev->dev)); + if (ret) { + dev_err(&pdev->dev, "cannot request gpio pin %d\n", + pcie->card_reset); + return ret; + } + } + + ret = oxnas_pcie_map_registers(pdev, np, pcie); + if (ret) { + dev_err(&pdev->dev, "cannot map registers\n"); + goto err_free_gpio; + } + + ret = oxnas_pcie_shared_init(pdev); + if (ret) + goto err_free_gpio; + + /* if hw not found, haslink cleared */ + oxnas_pcie_init_hw(pdev, pcie); + + if (pcie->haslink && oxnas_pcie_link_up(pcie)) { + pcie->haslink = 1; + dev_info(&pdev->dev, "link up\n"); + } else { + pcie->haslink = 0; + dev_info(&pdev->dev, "link down\n"); + } + /* should we register our controller even when pcie->haslink is 0 ? */ + /* register the controller with framework */ + oxnas_pcie_enable(&pdev->dev, pcie); + + return 0; + +err_free_gpio: + if (pcie->card_reset) + gpio_free(pcie->card_reset); + + return ret; +} + +static const struct of_device_id oxnas_pcie_of_match_table[] = { + { .compatible = "plxtech,nas782x-pcie", }, + {}, +}; +MODULE_DEVICE_TABLE(of, oxnas_pcie_of_match_table); + +static struct platform_driver oxnas_pcie_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "oxnas-pcie", + .of_match_table = + of_match_ptr(oxnas_pcie_of_match_table), + }, +}; + +static int __init oxnas_pcie_init(void) +{ + return platform_driver_probe(&oxnas_pcie_driver, + oxnas_pcie_probe); +} + +subsys_initcall(oxnas_pcie_init); + +MODULE_AUTHOR("Ma Haijun <mahaijuns@gmail.com>"); +MODULE_DESCRIPTION("NAS782x PCIe driver"); +MODULE_LICENSE("GPLv2"); diff --git a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c new file mode 100644 index 0000000000..79c4fa3a95 --- /dev/null +++ b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c @@ -0,0 +1,368 @@ +/* + * drivers/usb/host/ehci-oxnas.c + * + * Tzachi Perelstein <tzachi@marvell.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_irq.h> +#include <linux/mfd/syscon.h> +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include <linux/dma-mapping.h> +#include <linux/clk.h> +#include <linux/regmap.h> +#include <linux/reset.h> + +#define USBHSMPH_CTRL_REGOFFSET 0x40 +#define USBHSMPH_STAT_REGOFFSET 0x44 +#define REF300_DIV_REGOFFSET 0xF8 +#define USBHSPHY_CTRL_REGOFFSET 0x84 +#define USB_CTRL_REGOFFSET 0x90 +#define PLLB_DIV_CTRL_REGOFFSET 0x1000F8 +#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16 +#define USBHSPHY_SUSPENDM_MANUAL_STATE 15 +#define USBHSPHY_ATE_ESET 14 +#define USBHSPHY_TEST_DIN 6 +#define USBHSPHY_TEST_ADD 2 +#define USBHSPHY_TEST_DOUT_SEL 1 +#define USBHSPHY_TEST_CLK 0 + +#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5 +#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT) +#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT) + +#define USBAMUX_DEVICE BIT(4) + +#define USBPHY_REFCLKDIV_SHIFT 2 +#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT) +#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT) + +#define USB_CTRL_USB_CKO_SEL_BIT 0 + +#define USB_INT_CLK_XTAL 0 +#define USB_INT_CLK_REF300 2 +#define USB_INT_CLK_PLLB 3 + +#define REF300_DIV_INT_SHIFT 8 +#define REF300_DIV_FRAC_SHIFT 0 +#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT) +#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT) + +#define PLLB_BYPASS 1 +#define PLLB_ENSAT 3 +#define PLLB_OUTDIV 4 +#define PLLB_REFDIV 8 +#define PLLB_DIV_INT_SHIFT 8 +#define PLLB_DIV_FRAC_SHIFT 0 +#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT) +#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT) + +#include "ehci.h" + +struct oxnas_hcd { + struct clk *clk; + struct clk *refsrc; + struct clk *phyref; + int use_pllb; + int use_phya; + struct reset_control *rst_host; + struct reset_control *rst_phya; + struct reset_control *rst_phyb; + struct regmap *syscon; +}; + +#define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller" + +static struct hc_driver __read_mostly oxnas_hc_driver; + +static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas) +{ + if (oxnas->use_pllb) { + /* enable pllb */ + clk_prepare_enable(oxnas->refsrc); + /* enable ref600 */ + clk_prepare_enable(oxnas->phyref); + /* 600MHz pllb divider for 12MHz */ + regmap_write_bits(oxnas->syscon, PLLB_DIV_CTRL_REGOFFSET, 0xffff, PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0)); + } else { + /* ref 300 divider for 12MHz */ + regmap_write_bits(oxnas->syscon, REF300_DIV_REGOFFSET, 0xffff, REF300_DIV_INT(25) | REF300_DIV_FRAC(0)); + } + + /* Ensure the USB block is properly reset */ + reset_control_reset(oxnas->rst_host); + reset_control_reset(oxnas->rst_phya); + reset_control_reset(oxnas->rst_phyb); + + /* Force the high speed clock to be generated all the time, via serial + programming of the USB HS PHY */ + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (2UL << USBHSPHY_TEST_ADD) | + (0xe0UL << USBHSPHY_TEST_DIN)); + + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (1UL << USBHSPHY_TEST_CLK) | + (2UL << USBHSPHY_TEST_ADD) | + (0xe0UL << USBHSPHY_TEST_DIN)); + + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (0xfUL << USBHSPHY_TEST_ADD) | + (0xaaUL << USBHSPHY_TEST_DIN)); + + regmap_write_bits(oxnas->syscon, USBHSPHY_CTRL_REGOFFSET, 0xffff, + (1UL << USBHSPHY_TEST_CLK) | + (0xfUL << USBHSPHY_TEST_ADD) | + (0xaaUL << USBHSPHY_TEST_DIN)); + + if (oxnas->use_pllb) /* use pllb clock */ + regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff, + USB_CLK_INTERNAL | USB_INT_CLK_PLLB); + else /* use ref300 derived clock */ + regmap_write_bits(oxnas->syscon, USB_CTRL_REGOFFSET, 0xffff, + USB_CLK_INTERNAL | USB_INT_CLK_REF300); + + if (oxnas->use_phya) { + /* Configure USB PHYA as a host */ + regmap_update_bits(oxnas->syscon, USB_CTRL_REGOFFSET, USBAMUX_DEVICE, 0); + } + + /* Enable the clock to the USB block */ + clk_prepare_enable(oxnas->clk); +} + +static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas) +{ + reset_control_assert(oxnas->rst_host); + reset_control_assert(oxnas->rst_phya); + reset_control_assert(oxnas->rst_phyb); + + if (oxnas->use_pllb) { + clk_disable_unprepare(oxnas->phyref); + clk_disable_unprepare(oxnas->refsrc); + } + clk_disable_unprepare(oxnas->clk); +} + +static int ehci_oxnas_reset(struct usb_hcd *hcd) +{ + #define txttfill_tuning reserved2[0] + + struct ehci_hcd *ehci; + u32 tmp; + int retval = ehci_setup(hcd); + if (retval) + return retval; + + ehci = hcd_to_ehci(hcd); + tmp = ehci_readl(ehci, &ehci->regs->txfill_tuning); + tmp &= ~0x00ff0000; + tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes) */ + tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/ + ehci_writel(ehci, tmp, &ehci->regs->txfill_tuning); + + tmp = ehci_readl(ehci, &ehci->regs->txttfill_tuning); + tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */ + ehci_writel(ehci, tmp, &ehci->regs->txttfill_tuning); + + return retval; +} + +static int ehci_oxnas_drv_probe(struct platform_device *ofdev) +{ + struct device_node *np = ofdev->dev.of_node; + struct usb_hcd *hcd; + struct ehci_hcd *ehci; + struct resource res; + struct oxnas_hcd *oxnas; + int irq, err; + struct reset_control *rstc; + + if (usb_disabled()) + return -ENODEV; + + if (!ofdev->dev.dma_mask) + ofdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask; + if (!ofdev->dev.coherent_dma_mask) + ofdev->dev.coherent_dma_mask = DMA_BIT_MASK(32); + + hcd = usb_create_hcd(&oxnas_hc_driver, &ofdev->dev, + dev_name(&ofdev->dev)); + if (!hcd) + return -ENOMEM; + + err = of_address_to_resource(np, 0, &res); + if (err) + goto err_res; + + hcd->rsrc_start = res.start; + hcd->rsrc_len = resource_size(&res); + + hcd->regs = devm_ioremap_resource(&ofdev->dev, &res); + if (IS_ERR(hcd->regs)) { + dev_err(&ofdev->dev, "devm_ioremap_resource failed\n"); + err = PTR_ERR(hcd->regs); + goto err_ioremap; + } + + oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv; + + oxnas->use_pllb = of_property_read_bool(np, "oxsemi,ehci_use_pllb"); + oxnas->use_phya = of_property_read_bool(np, "oxsemi,ehci_use_phya"); + + oxnas->syscon = syscon_regmap_lookup_by_phandle(np, "oxsemi,sys-ctrl"); + if (IS_ERR(oxnas->syscon)) { + err = PTR_ERR(oxnas->syscon); + goto err_syscon; + } + + oxnas->clk = of_clk_get_by_name(np, "usb"); + if (IS_ERR(oxnas->clk)) { + err = PTR_ERR(oxnas->clk); + goto err_clk; + } + + if (oxnas->use_pllb) { + oxnas->refsrc = of_clk_get_by_name(np, "refsrc"); + if (IS_ERR(oxnas->refsrc)) { + err = PTR_ERR(oxnas->refsrc); + goto err_refsrc; + } + oxnas->phyref = of_clk_get_by_name(np, "phyref"); + if (IS_ERR(oxnas->refsrc)) { + err = PTR_ERR(oxnas->refsrc); + goto err_phyref; + } + + } else { + oxnas->refsrc = NULL; + oxnas->phyref = NULL; + } + + rstc = devm_reset_control_get(&ofdev->dev, "host"); + if (IS_ERR(rstc)) { + err = PTR_ERR(rstc); + goto err_rst; + } + oxnas->rst_host = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "phya"); + if (IS_ERR(rstc)) { + err = PTR_ERR(rstc); + goto err_rst; + } + oxnas->rst_phya = rstc; + + rstc = devm_reset_control_get(&ofdev->dev, "phyb"); + if (IS_ERR(rstc)) { + err = PTR_ERR(rstc); + goto err_rst; + } + oxnas->rst_phyb = rstc; + + irq = irq_of_parse_and_map(np, 0); + if (!irq) { + dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n"); + err = -EBUSY; + goto err_irq; + } + + hcd->has_tt = 1; + ehci = hcd_to_ehci(hcd); + ehci->caps = hcd->regs; + + start_oxnas_usb_ehci(oxnas); + + err = usb_add_hcd(hcd, irq, IRQF_SHARED); + if (err) + goto err_hcd; + + return 0; + +err_hcd: + stop_oxnas_usb_ehci(oxnas); +err_irq: +err_rst: + if (oxnas->phyref) + clk_put(oxnas->phyref); +err_phyref: + if (oxnas->refsrc) + clk_put(oxnas->refsrc); +err_refsrc: + clk_put(oxnas->clk); +err_syscon: +err_clk: +err_ioremap: +err_res: + usb_put_hcd(hcd); + + return err; +} + +static int ehci_oxnas_drv_remove(struct platform_device *pdev) +{ + struct usb_hcd *hcd = platform_get_drvdata(pdev); + struct oxnas_hcd *oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv; + + usb_remove_hcd(hcd); + if (oxnas->use_pllb) { + clk_disable_unprepare(oxnas->phyref); + clk_put(oxnas->phyref); + clk_disable_unprepare(oxnas->refsrc); + clk_put(oxnas->refsrc); + } + clk_disable_unprepare(oxnas->clk); + usb_put_hcd(hcd); + + return 0; +} + +static const struct of_device_id oxnas_ehci_dt_ids[] = { + { .compatible = "plxtech,nas782x-ehci" }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, oxnas_ehci_dt_ids); + +static struct platform_driver ehci_oxnas_driver = { + .probe = ehci_oxnas_drv_probe, + .remove = ehci_oxnas_drv_remove, + .shutdown = usb_hcd_platform_shutdown, + .driver.name = "oxnas-ehci", + .driver.of_match_table = oxnas_ehci_dt_ids, +}; + +static const struct ehci_driver_overrides oxnas_overrides __initconst = { + .reset = ehci_oxnas_reset, + .extra_priv_size = sizeof(struct oxnas_hcd), +}; + +static int __init ehci_oxnas_init(void) +{ + if (usb_disabled()) + return -ENODEV; + + ehci_init_driver(&oxnas_hc_driver, &oxnas_overrides); + return platform_driver_register(&ehci_oxnas_driver); +} +module_init(ehci_oxnas_init); + +static void __exit ehci_oxnas_cleanup(void) +{ + platform_driver_unregister(&ehci_oxnas_driver); +} +module_exit(ehci_oxnas_cleanup); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_ALIAS("platform:oxnas-ehci"); +MODULE_LICENSE("GPL"); |