diff options
Diffstat (limited to 'target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi')
-rw-r--r-- | target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi | 342 |
1 files changed, 0 insertions, 342 deletions
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi deleted file mode 100644 index c096a7d1c3..0000000000 --- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi +++ /dev/null @@ -1,342 +0,0 @@ -/* - * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include "skeleton.dtsi" - -/ { - compatible = "plxtech,nas7820", "plxtech,nas782x"; - interrupt-parent = <&gic>; - - aliases { - serial0 = &uart0; - /* alias to determine bank index */ - gpio0 = &GPIOA; - gpio1 = &GPIOB; - - ethernet0 = &gmac; - }; - - cpus { - cpu@0 { - compatible = "arm,arm11mpcore"; - }; - cpu@1 { - compatible = "arm,arm11mpcore"; - }; - }; - - gic: gic@47001000 { - compatible = "arm,arm11mp-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x47001000 0x1000>, - <0x47000100 0x0100>; - }; - - rst: reset-controller@44E00034 { - compatible = "plxtech,nas782x-reset"; - #reset-cells = <1>; - reg = <0x44E00034 0x8>; /* currently not used */ - }; - - rps: rps@44400000 { - compatible = "plxtech,nas782x-rps"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x44400000 0x14>; - interrupts = <0 5 0x304>; - }; - - /* external oscillator */ - osc: oscillator { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - }; - - sysclk: sysclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <4>; - clock-mult = <1>; - clocks = <&osc>; - }; - - plla: plla@44e001f0 { - compatible = "plxtech,nas782x-plla"; - #clock-cells = <0>; - clocks = <&osc>; - reg = <0x44e001f0 0x10>; - }; - - pllb: pllb@44f001f0 { - compatible = "plxtech,nas782x-pllb"; - #clock-cells = <0>; - clocks = <&osc>; - reg = <0x44f001f0 0x10>; - resets = <&rst 31>; - }; - - stdclk: stdclk { - compatible = "plxtech,nas782x-stdclk"; - #clock-cells = <1>; - clocks = <&osc>; - }; - - twdclk: twdclk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - clocks = <&plla>; - }; - - gmacclk: gmacclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <125000000>; - }; - - pinctrl { - /* act as a simple bus, so children will be probed automatically */ - #address-cells = <1>; - #size-cells = <1>; - compatible = "plxtech,nas782x-pinctrl", "simple-bus"; - ranges; - - plxtech,mux-mask = < - 0xFFFFFFFF 0xCC0FFDF9 0xFC000E60 0x0F03F7E0 0xF00C0FE0 - 0x0003FFFF 0x00037FFF 0x0003FFF8 0x00000F00 0x0003F7F3 - >; - - GPIOA: gpio@44000000 { - compatible = "plxtech,nas782x-gpio"; - reg = <0x44000000 0x100>, <0x44E00000 0x200>; - interrupts = <0 21 0x304>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #gpio-lines = <32>; /* real gpio pin count */ - }; - - GPIOB: gpio@44100000 { - compatible = "plxtech,nas782x-gpio"; - reg = <0x44100000 0x100>, <0x44F00000 0x200>; - interrupts = <0 22 0x304>; - #gpio-cells = <2>; - gpio-controller; - interrupt-controller; - #interrupt-cells = <2>; - #gpio-lines = <18>; /* real gpio pin count */ - }; - - uart0 { - pinctrl_uart0: uart0-0 { - plxtech,pins = - <0 30 5 0 /* MF_A30 PINMUX_ALT PINMUX_UARTA_SIN */ - 0 31 5 0>; /* MF_A31 PINMUX_ALT PINMUX_UARTA_SOUT */ - }; - }; - - gmac0 { - pinctrl_gmac0: gmac0-0 { - plxtech,pins = - <0 3 1 0 /* MF_A3 PINMUX_2 PINMUX_MACA_MDC */ - 0 4 1 0>; /* MF_A4 PINMUX_2 PINMUX_MACA_MDIO */ - }; - }; - - nand0 { - pinctrl_nand0: nand0-0 { - plxtech,pins = - <0 12 1 0 /* MF_A12 PINMUX_2 PINMUX_STATIC_DATA0 */ - 0 13 1 0 /* MF_A13 PINMUX_2 PINMUX_STATIC_DATA1 */ - 0 14 1 0 /* MF_A14 PINMUX_2 PINMUX_STATIC_DATA2 */ - 0 15 1 0 /* MF_A15 PINMUX_2 PINMUX_STATIC_DATA3 */ - 0 16 1 0 /* MF_A16 PINMUX_2 PINMUX_STATIC_DATA4 */ - 0 17 1 0 /* MF_A17 PINMUX_2 PINMUX_STATIC_DATA5 */ - 0 18 1 0 /* MF_A18 PINMUX_2 PINMUX_STATIC_DATA6 */ - 0 19 1 0 /* MF_A19 PINMUX_2 PINMUX_STATIC_DATA7 */ - - 0 20 1 0 /* MF_A20 PINMUX_2 PINMUX_STATIC_NWE */ - 0 21 1 0 /* MF_A21 PINMUX_2 PINMUX_STATIC_NOE */ - 0 22 1 0 /* MF_A22 PINMUX_2 PINMUX_STATIC_NCS */ - 0 23 1 0 /* MF_A23 PINMUX_2 PINMUX_STATIC_ADDR18 */ - 0 24 1 0>; /* MF_A24 PINMUX_2 PINMUX_STATIC_ADDR19 */ - }; - }; - }; - - pcie-controller@47C00000 { - compatible = "plxtech,nas782x-pcie"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - - /* flag & space bus address host address size */ - ranges = < 0x82000000 0 0x48000000 0x48000000 0 0x2000000 - 0xC2000000 0 0x4A000000 0x4A000000 0 0x1E00000 - 0x81000000 0 0x4BE00000 0x4BE00000 0 0x0100000 - 0x80000000 0 0x4BF00000 0x4BF00000 0 0x0100000>; - - bus-range = <0x00 0x7f>; - - /* cfg inbound translator phy*/ - reg = <0x47C00000 0x1000>, <0x47D00000 0x100>, <0x44A00000 0x10>; - - #interrupt-cells = <1>; - /* wild card mask, match all bus address & interrupt specifier */ - /* format: bus address mask, interrupt specifier mask */ - /* each bit 1 means need match, 0 means ignored when match */ - interrupt-map-mask = <0 0 0 0>; - /* format: a list of: bus address, interrupt specifier, - * parent interrupt controller & specifier */ - interrupt-map = <0 0 0 0 &gic 0 19 0x304>; - - gpios = <&GPIOB 12 0>; - clocks = <&stdclk 8>, <&pllb>; - clock-names = "pcie", "busclk"; - resets = <&rst 7>, <&rst 14>; - reset-names = "pcie", "phy"; - - plxtech,pcie-hcsl-bit = <2>; - plxtech,pcie-ctrl-offset = <0x120>; - plxtech,pcie-outbound-offset = <0x138>; - status = "disabled"; - }; - - pcie-controller@47E00000 { - compatible = "plxtech,nas782x-pcie"; - device_type = "pci"; - #address-cells = <3>; - #size-cells = <2>; - - /* flag & space bus address host address size */ - ranges = < 0x82000000 0 0x4C000000 0x4C000000 0 0x2000000 - 0xC2000000 0 0x4E000000 0x4E000000 0 0x1E00000 - 0x81000000 0 0x4FE00000 0x4FE00000 0 0x0100000 - 0x80000000 0 0x4FF00000 0x4FF00000 0 0x0100000>; - - bus-range = <0x80 0xff>; - - /* cfg inbound translator phy*/ - reg = <0x47E00000 0x1000>, <0x47F00000 0x100>, <0x44A00000 0x10>; - - #interrupt-cells = <1>; - /* wild card mask, match all bus address & interrupt specifier */ - /* format: bus address mask, interrupt specifier mask */ - /* each bit 1 means need match, 0 means ignored when match */ - interrupt-map-mask = <0 0 0 0>; - /* format: a list of: bus address, interrupt specifier, - * parent interrupt controller & specifier */ - interrupt-map = <0 0 0 0 &gic 0 20 0x304>; - - /* gpios = <&GPIOB 12 0>; */ - clocks = <&stdclk 11>, <&pllb>; - clock-names = "pcie", "busclk"; - resets = <&rst 23>, <&rst 14>; - reset-names = "pcie", "phy"; - - plxtech,pcie-hcsl-bit = <3>; - plxtech,pcie-ctrl-offset = <0x124>; - plxtech,pcie-outbound-offset = <0x174>; - status = "disabled"; - }; - - local-timer@47000600 { - compatible = "arm,arm11mp-twd-timer"; - reg = <0x47000600 0x20>; - interrupts = <1 13 0x304>; /* percpu, irq 29, cpu mask 3, level high */ - clocks = <&twdclk>; - }; - - watchdog@47000620 { - compatible = "mpcore_wdt"; - reg = <0x47000620 0x20>; - interrupts = <1 14 0x304>; /* percpu, irq 30, cpu mask 3, level high */ - clocks = <&twdclk>; - }; - - timer@44400200 { - compatible = "plxtech,nas782x-rps-timer"; - reg = <0x44400200 0x40>; - clocks = <&sysclk>; - }; - - uart0: uart@44200000 { - compatible = "ns16550a"; - reg = <0x44200000 0x100>; - clock-frequency = <6250000>; - interrupts = <0 23 0x304>; - reg-shift = <0>; - fifo-size = <16>; - reg-io-width = <1>; - current-speed = <115200>; - no-loopback-test; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; - status = "disabled"; - }; - - sata@45900000 { - compatible = "plxtech,nas782x-sata"; - /* ports dmactl sgdma */ - reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>, - /* core phy descriptors (optional) */ - <0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>; - interrupts = <0 18 0x304>; - clocks = <&stdclk 4>; - resets = <&rst 11>, <&rst 12>, <&rst 13>; - reset-names = "sata", "link", "phy"; - nr-ports = <1>; - status = "disabled"; - }; - - nandc: nand-controller@41000000 { - compatible = "oxsemi,ox820-nand"; - reg = <0x41000000 0x100000>; - clocks = <&stdclk 9>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand0>; - resets = <&rst 15>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; - }; - - gmac: ethernet@40400000 { - compatible = "plxtech,nas782x-gmac", "snps,dwmac"; - reg = <0x40400000 0x2000>; - interrupts = <0 8 0x304>, <0 17 0x304>; - interrupt-names = "macirq", "eth_wake_irq"; - mac-address = [000000000000]; /* Filled in by U-Boot */ - phy-mode = "rgmii"; - clocks = <&stdclk 7>, <&gmacclk>; - clock-names = "gmac", "stmmaceth"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gmac0>; - resets = <&rst 6>; - status = "disabled"; - }; - - ehci@40200100 { - compatible = "plxtech,nas782x-ehci"; - reg = <0x40200100 0xf00>; - interrupts = <0 7 0x304>; - clocks = <&stdclk 6>, <&pllb>, <&stdclk 12>; - clock-names = "usb", "refsrc", "phyref"; - resets = <&rst 4>, <&rst 5>, <&rst 26>; - reset-names = "host", "phya", "phyb"; - /* Otherwise ref300 is used, which is derived from sata phy - * in that case, usb depends on sata initialization */ - /* FIXME: how to make this dependency explicit ? */ - plxtech,ehci_use_pllb; - status = "disabled"; - }; -}; |