2 files changed, 0 insertions, 85 deletions
diff --git a/target/linux/orion/base-files/etc/uci-defaults/hardware b/target/linux/orion/base-files/etc/uci-defaults/hardware
deleted file mode 100644
index 7f727eb595..0000000000
--- a/target/linux/orion/base-files/etc/uci-defaults/hardware
+++ /dev/null
@@ -1,54 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-#
-# This script sets system defaults for the hardware on firstboot
-#
-
-local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
-
-wrt350nv2_default() {
-# leds
-	uci batch <<__EOF
-set system.power_led=led
-set system.power_led.name='Power LED (green)'
-set system.power_led.sysfs='wrt350nv2:green:power'
-set system.power_led.default='1'
-set system.wifi_led=led
-set system.wifi_led.name='Wireless LED (green)'
-set system.wifi_led.sysfs='wrt350nv2:green:wireless'
-set system.wifi_led.trigger='netdev'
-set system.wifi_led.dev='wlan0'
-set system.wifi_led.mode='link tx rx'
-set system.wifi_led.default='0'
-commit system
-__EOF
-
-# add mac address from U-Boot partition to lan and wan devices
-	MTD=`grep -e 'u-boot' /proc/mtd`
-	MTD=`echo ${MTD} | sed 's/[a-z]*\([0-9]*\):.*/\1/'`
-	[ -n "${MTD}" ] && {
-		MACADDR=`dd if=/dev/mtdblock${MTD} bs=1 skip=262048 count=6 2>/dev/null | hexdump -e '1/1 "%02x"'`
-		MACADDR2=$(( 0x${MACADDR} + 1))
-		MACADDR2=`printf "%012x" ${MACADDR2}`
-
-		MACADDR=`echo ${MACADDR} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
-		MACADDR2=`echo ${MACADDR2} | sed 's/\(..\)/\1:/g' | sed 's/:$//'`
-
-		uci set network.eth0.macaddr=${MACADDR}
-		uci set network.lan.macaddr=${MACADDR}
-		uci set network.wan.macaddr=${MACADDR2}
-		uci commit network
-	}
-}
-
-case "${hardware}" in
- 'Linksys WRT350N v2')
-	wrt350nv2_default
-	;;
-esac
diff --git a/target/linux/orion/base-files/lib/upgrade/platform.sh b/target/linux/orion/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index fdd26c5176..0000000000
--- a/target/linux/orion/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-# use default "image" for PART_NAME
-# use default for platform_do_upgrade()
-
-platform_check_image() {
-	[ "${ARGC}" -gt 1 ] && { echo 'Too many arguments. Only flash file expected.'; return 1; }
-
-	local hardware=`sed -n /Hardware/s/.*:.//p /proc/cpuinfo`
-	local magic="$(get_magic_word "$1")"
-
-	case "${hardware}" in
-	 # hardware with padded uImage + padded rootfs
-	 'Linksys WRT350N v2')
-		[ "${magic}" != '2705' ] && {
-			echo "Invalid image type ${magic}."
-			return 1
-		}
-		return 0
-		;;
-	 # Netgear WNR854T has extra header before uImage
-	 'Netgear WNR854T')
-		[ "${magic}" != '8519' ] && {
-			echo "Invalid image type ${magic}."
-			return 1
-		}
-		return 0
-		;;
-	esac
-
-	echo "Sysupgrade is not yet supported on ${hardware}."
-	return 1
-}