diff options
Diffstat (limited to 'target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts')
-rw-r--r-- | target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts | 213 |
1 files changed, 213 insertions, 0 deletions
diff --git a/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts new file mode 100644 index 0000000000..a89455c613 --- /dev/null +++ b/target/linux/octeon/files/arch/mips/boot/dts/cavium-octeon/cn7130_ubnt_edgerouter-4.dts @@ -0,0 +1,213 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "cn71xx.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + compatible = "ubnt,edgerouter-4", "cavium,cn7130"; + model = "Ubiquiti EdgeRouter 4"; + + aliases { + /* White + Blinking Blue */ + led-boot = &led_power_white; + /* Blue + Blinking White */ + led-failsafe = &led_power_blue; + /* Constant Blue */ + led-running = &led_power_blue; + /* Blue + Blinking White */ + led-upgrade = &led_power_blue; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x00000000>, + <0x0 0x10000000>, + <0x0 0x20000000>, + <0x0 0x30000000>; + }; + + leds { + compatible = "gpio-leds"; + + led_power_blue: power_blue { + label = "blue:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + led_power_white: power_white { + label = "white:power"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; + + keys { + compatible = "gpio-keys-polled"; + poll-interval = <20>; + + reset { + label = "reset"; + linux,code = <KEY_RESTART>; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + debounce-interval = <60>; + }; + }; + + sfp: sfp { + compatible = "sff,sfp"; + i2c-bus = <&twsi0>; + /* Pins 12, 13 and 14 gets pulled low when SFP is plugged in */ + mod-def0-gpio = <&gpio 12 GPIO_ACTIVE_LOW>; + }; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&xhci0 { + status = "okay"; + dr_mode = "host"; +}; + +&twsi0 { + status = "okay"; + + sfp_eeprom@50 { + compatible = "at,24c04"; + reg = <0x50>; + }; + + sfp_eeprom@51 { + compatible = "at,24c04"; + reg = <0x51>; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "Macronix,mx25l6405d", "spi-flash"; + reg = <0>; + spi-max-frequency = <25000000>; + + partition@0 { + label = "boot0"; + read-only; + reg = <0x000000 0x300000>; + }; + + partition@300000 { + label = "dummy"; + read-only; + reg = <0x300000 0x100000>; + }; + + eeprom: partition@400000 { + label = "eeprom"; + read-only; + reg = <0x400000 0x10000>; + }; + }; +}; + +&mmc { + status = "okay"; + + mmc-slot@0 { + compatible = "mmc-slot"; + reg = <0>; + non-removable; + max-frequency = <26000000>; + voltage-ranges = <3300 3300>; + bus-width = <8>; + }; +}; + +&smi0 { + status = "okay"; + + phy4: ethernet-phy@4 { + device_type = "ethernet-phy"; + interrupts = <17 8>; + interrupt-parent = <&gpio>; + compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; + reg = <4>; + sfp = <&sfp>; + }; + + phy5: ethernet-phy@5 { + device_type = "ethernet-phy"; + interrupts = <17 8>; + interrupt-parent = <&gpio>; + compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; + reg = <5>; + }; + + phy6: ethernet-phy@6 { + device_type = "ethernet-phy"; + interrupts = <17 8>; + interrupt-parent = <&gpio>; + compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; + reg = <6>; + }; + + phy7: ethernet-phy@7 { + device_type = "ethernet-phy"; + interrupts = <17 8>; + interrupt-parent = <&gpio>; + compatible = "vitesse,vsc8504", "ethernet-phy-ieee802.3-c22"; + reg = <7>; + }; +}; + +&pip { + status = "okay"; + + interface@0 { + status = "okay"; + + ethernet@0 { + label = "lan3"; + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy4>; + mtd-mac-address = <&eeprom 0>; + }; + + ethernet@1 { + label = "lan0"; + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy5>; + mtd-mac-address = <&eeprom 0>; + mtd-mac-address-increment = <(1)>; + }; + + ethernet@2 { + label = "lan1"; + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy6>; + mtd-mac-address = <&eeprom 0>; + mtd-mac-address-increment = <(2)>; + }; + + ethernet@3 { + label = "lan2"; + status = "okay"; + phy-mode = "sgmii"; + phy-handle = <&phy7>; + mtd-mac-address = <&eeprom 0>; + mtd-mac-address-increment = <(3)>; + }; + }; +}; |