diff options
Diffstat (limited to 'target/linux/mvebu')
4 files changed, 395 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch b/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch new file mode 100644 index 0000000000..8a5f3f3cf4 --- /dev/null +++ b/target/linux/mvebu/patches-5.10/702-net-next-ethernet-marvell-mvnetaMQPrioOffload.patch @@ -0,0 +1,71 @@ +From 75fa71e3acadbb4ab5eda18505277eb9a1f69b23 Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier <maxime.chevallier@bootlin.com> +Date: Fri, 26 Nov 2021 12:20:53 +0100 +Subject: net: mvneta: Use struct tc_mqprio_qopt_offload for MQPrio + configuration + +The struct tc_mqprio_qopt_offload is a container for struct tc_mqprio_qopt, +that allows passing extra parameters, such as traffic shaping. This commit +converts the current mqprio code to that new struct. + +Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 17 ++++++++++------- + 1 file changed, 10 insertions(+), 7 deletions(-) + +(limited to 'drivers/net/ethernet/marvell/mvneta.c') + +diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c +index 80e4b500695e6..46b7604805f76 100644 +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -38,6 +38,7 @@ + #include <net/ipv6.h> + #include <net/tso.h> + #include <net/page_pool.h> ++#include <net/pkt_cls.h> + #include <linux/bpf_trace.h> + + /* Registers */ +@@ -4908,14 +4909,14 @@ static void mvneta_setup_rx_prio_map(struct mvneta_port *pp) + } + + static int mvneta_setup_mqprio(struct net_device *dev, +- struct tc_mqprio_qopt *qopt) ++ struct tc_mqprio_qopt_offload *mqprio) + { + struct mvneta_port *pp = netdev_priv(dev); + u8 num_tc; + int i; + +- qopt->hw = TC_MQPRIO_HW_OFFLOAD_TCS; +- num_tc = qopt->num_tc; ++ mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS; ++ num_tc = mqprio->qopt.num_tc; + + if (num_tc > rxq_number) + return -EINVAL; +@@ -4926,13 +4927,15 @@ static int mvneta_setup_mqprio(struct net_device *dev, + return 0; + } + +- memcpy(pp->prio_tc_map, qopt->prio_tc_map, sizeof(pp->prio_tc_map)); ++ memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map, ++ sizeof(pp->prio_tc_map)); + + mvneta_setup_rx_prio_map(pp); + +- netdev_set_num_tc(dev, qopt->num_tc); +- for (i = 0; i < qopt->num_tc; i++) +- netdev_set_tc_queue(dev, i, qopt->count[i], qopt->offset[i]); ++ netdev_set_num_tc(dev, mqprio->qopt.num_tc); ++ for (i = 0; i < mqprio->qopt.num_tc; i++) ++ netdev_set_tc_queue(dev, i, mqprio->qopt.count[i], ++ mqprio->qopt.offset[i]); + + return 0; + } +-- +cgit 1.2.3-1.el7 + diff --git a/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch b/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch new file mode 100644 index 0000000000..a9bf9b22c3 --- /dev/null +++ b/target/linux/mvebu/patches-5.10/703-net-next-ethernet-marvell-mvnetaMQPrioFlag.patch @@ -0,0 +1,35 @@ +From e7ca75fe6662f78bfeb0112671c812e4c7b8e214 Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier <maxime.chevallier@bootlin.com> +Date: Fri, 26 Nov 2021 12:20:54 +0100 +Subject: net: mvneta: Don't force-set the offloading flag + +The qopt->hw flag is set by the TC code according to the offloading mode +asked by user. Don't force-set it in the driver, but instead read it to +make sure we do what's asked. + +Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 4 +++- + 1 file changed, 3 insertions(+), 1 deletion(-) + +(limited to 'drivers/net/ethernet/marvell/mvneta.c') + +diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c +index 46b7604805f76..d3ce87e69d2a8 100644 +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -4915,7 +4915,9 @@ static int mvneta_setup_mqprio(struct net_device *dev, + u8 num_tc; + int i; + +- mqprio->qopt.hw = TC_MQPRIO_HW_OFFLOAD_TCS; ++ if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS) ++ return 0; ++ + num_tc = mqprio->qopt.num_tc; + + if (num_tc > rxq_number) +-- +cgit 1.2.3-1.el7 + diff --git a/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch b/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch new file mode 100644 index 0000000000..ac5fdc329a --- /dev/null +++ b/target/linux/mvebu/patches-5.10/704-net-next-ethernet-marvell-mvnetaMQPrioQueue.patch @@ -0,0 +1,102 @@ +From e9f7099d0730341b24c057acbf545dd019581db6 Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier <maxime.chevallier@bootlin.com> +Date: Fri, 26 Nov 2021 12:20:55 +0100 +Subject: net: mvneta: Allow having more than one queue per TC + +The current mqprio implementation assumed that we are only using one +queue per TC. Use the offset and count parameters to allow using +multiple queues per TC. In that case, the controller will use a standard +round-robin algorithm to pick queues assigned to the same TC, with the +same priority. + +This only applies to VLAN priorities in ingress traffic, each TC +corresponding to a vlan priority. + +Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 35 ++++++++++++++++++++--------------- + 1 file changed, 20 insertions(+), 15 deletions(-) + +(limited to 'drivers/net/ethernet/marvell/mvneta.c') + +diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c +index d3ce87e69d2a8..aba452e8abfe6 100644 +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -493,7 +493,6 @@ struct mvneta_port { + u8 mcast_count[256]; + u16 tx_ring_size; + u16 rx_ring_size; +- u8 prio_tc_map[8]; + + phy_interface_t phy_interface; + struct device_node *dn; +@@ -4897,13 +4896,12 @@ static void mvneta_clear_rx_prio_map(struct mvneta_port *pp) + mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, 0); + } + +-static void mvneta_setup_rx_prio_map(struct mvneta_port *pp) ++static void mvneta_map_vlan_prio_to_rxq(struct mvneta_port *pp, u8 pri, u8 rxq) + { +- u32 val = 0; +- int i; ++ u32 val = mvreg_read(pp, MVNETA_VLAN_PRIO_TO_RXQ); + +- for (i = 0; i < rxq_number; i++) +- val |= MVNETA_VLAN_PRIO_RXQ_MAP(i, pp->prio_tc_map[i]); ++ val &= ~MVNETA_VLAN_PRIO_RXQ_MAP(pri, 0x7); ++ val |= MVNETA_VLAN_PRIO_RXQ_MAP(pri, rxq); + + mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val); + } +@@ -4912,8 +4910,8 @@ static int mvneta_setup_mqprio(struct net_device *dev, + struct tc_mqprio_qopt_offload *mqprio) + { + struct mvneta_port *pp = netdev_priv(dev); ++ int rxq, tc; + u8 num_tc; +- int i; + + if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS) + return 0; +@@ -4923,21 +4921,28 @@ static int mvneta_setup_mqprio(struct net_device *dev, + if (num_tc > rxq_number) + return -EINVAL; + ++ mvneta_clear_rx_prio_map(pp); ++ + if (!num_tc) { +- mvneta_clear_rx_prio_map(pp); + netdev_reset_tc(dev); + return 0; + } + +- memcpy(pp->prio_tc_map, mqprio->qopt.prio_tc_map, +- sizeof(pp->prio_tc_map)); ++ netdev_set_num_tc(dev, mqprio->qopt.num_tc); ++ ++ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) { ++ netdev_set_tc_queue(dev, tc, mqprio->qopt.count[tc], ++ mqprio->qopt.offset[tc]); + +- mvneta_setup_rx_prio_map(pp); ++ for (rxq = mqprio->qopt.offset[tc]; ++ rxq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc]; ++ rxq++) { ++ if (rxq >= rxq_number) ++ return -EINVAL; + +- netdev_set_num_tc(dev, mqprio->qopt.num_tc); +- for (i = 0; i < mqprio->qopt.num_tc; i++) +- netdev_set_tc_queue(dev, i, mqprio->qopt.count[i], +- mqprio->qopt.offset[i]); ++ mvneta_map_vlan_prio_to_rxq(pp, tc, rxq); ++ } ++ } + + return 0; + } +-- +cgit 1.2.3-1.el7 + diff --git a/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch b/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch new file mode 100644 index 0000000000..d2fd1832d8 --- /dev/null +++ b/target/linux/mvebu/patches-5.10/705-net-next-ethernet-marvell-mvnetaMQPrioTCOffload.patch @@ -0,0 +1,187 @@ +From 2551dc9e398c37a15e52122d385c29a8b06be45f Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier <maxime.chevallier@bootlin.com> +Date: Fri, 26 Nov 2021 12:20:56 +0100 +Subject: net: mvneta: Add TC traffic shaping offload + +The mvneta controller is able to do some tocken-bucket per-queue traffic +shaping. This commit adds support for setting these using the TC mqprio +interface. + +The token-bucket parameters are customisable, but the current +implementation configures them to have a 10kbps resolution for the +rate limitation, since it allows to cover the whole range of max_rate +values from 10kbps to 5Gbps with 10kbps increments. + +Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 120 +++++++++++++++++++++++++++++++++- + 1 file changed, 119 insertions(+), 1 deletion(-) + +(limited to 'drivers/net/ethernet/marvell/mvneta.c') + +diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c +index aba452e8abfe6..2368ae3f0e10d 100644 +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -248,12 +248,39 @@ + #define MVNETA_TXQ_SENT_DESC_MASK 0x3fff0000 + #define MVNETA_PORT_TX_RESET 0x3cf0 + #define MVNETA_PORT_TX_DMA_RESET BIT(0) ++#define MVNETA_TXQ_CMD1_REG 0x3e00 ++#define MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 BIT(3) ++#define MVNETA_TXQ_CMD1_BW_LIM_EN BIT(0) ++#define MVNETA_REFILL_NUM_CLK_REG 0x3e08 ++#define MVNETA_REFILL_MAX_NUM_CLK 0x0000ffff + #define MVNETA_TX_MTU 0x3e0c + #define MVNETA_TX_TOKEN_SIZE 0x3e14 + #define MVNETA_TX_TOKEN_SIZE_MAX 0xffffffff ++#define MVNETA_TXQ_BUCKET_REFILL_REG(q) (0x3e20 + ((q) << 2)) ++#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_MASK 0x3ff00000 ++#define MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT 20 ++#define MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX 0x0007ffff + #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2)) + #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff + ++/* The values of the bucket refill base period and refill period are taken from ++ * the reference manual, and adds up to a base resolution of 10Kbps. This allows ++ * to cover all rate-limit values from 10Kbps up to 5Gbps ++ */ ++ ++/* Base period for the rate limit algorithm */ ++#define MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS 100 ++ ++/* Number of Base Period to wait between each bucket refill */ ++#define MVNETA_TXQ_BUCKET_REFILL_PERIOD 1000 ++ ++/* The base resolution for rate limiting, in bps. Any max_rate value should be ++ * a multiple of that value. ++ */ ++#define MVNETA_TXQ_RATE_LIMIT_RESOLUTION (NSEC_PER_SEC / \ ++ (MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS * \ ++ MVNETA_TXQ_BUCKET_REFILL_PERIOD)) ++ + #define MVNETA_LPI_CTRL_0 0x2cc0 + #define MVNETA_LPI_CTRL_1 0x2cc4 + #define MVNETA_LPI_REQUEST_ENABLE BIT(0) +@@ -4906,11 +4933,74 @@ static void mvneta_map_vlan_prio_to_rxq(struct mvneta_port *pp, u8 pri, u8 rxq) + mvreg_write(pp, MVNETA_VLAN_PRIO_TO_RXQ, val); + } + ++static int mvneta_enable_per_queue_rate_limit(struct mvneta_port *pp) ++{ ++ unsigned long core_clk_rate; ++ u32 refill_cycles; ++ u32 val; ++ ++ core_clk_rate = clk_get_rate(pp->clk); ++ if (!core_clk_rate) ++ return -EINVAL; ++ ++ refill_cycles = MVNETA_TXQ_BUCKET_REFILL_BASE_PERIOD_NS / ++ (NSEC_PER_SEC / core_clk_rate); ++ ++ if (refill_cycles > MVNETA_REFILL_MAX_NUM_CLK) ++ return -EINVAL; ++ ++ /* Enable bw limit algorithm version 3 */ ++ val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG); ++ val &= ~(MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN); ++ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val); ++ ++ /* Set the base refill rate */ ++ mvreg_write(pp, MVNETA_REFILL_NUM_CLK_REG, refill_cycles); ++ ++ return 0; ++} ++ ++static void mvneta_disable_per_queue_rate_limit(struct mvneta_port *pp) ++{ ++ u32 val = mvreg_read(pp, MVNETA_TXQ_CMD1_REG); ++ ++ val |= (MVNETA_TXQ_CMD1_BW_LIM_SEL_V1 | MVNETA_TXQ_CMD1_BW_LIM_EN); ++ mvreg_write(pp, MVNETA_TXQ_CMD1_REG, val); ++} ++ ++static int mvneta_setup_queue_rates(struct mvneta_port *pp, int queue, ++ u64 min_rate, u64 max_rate) ++{ ++ u32 refill_val, rem; ++ u32 val = 0; ++ ++ /* Convert to from Bps to bps */ ++ max_rate *= 8; ++ ++ if (min_rate) ++ return -EINVAL; ++ ++ refill_val = div_u64_rem(max_rate, MVNETA_TXQ_RATE_LIMIT_RESOLUTION, ++ &rem); ++ ++ if (rem || !refill_val || ++ refill_val > MVNETA_TXQ_BUCKET_REFILL_VALUE_MAX) ++ return -EINVAL; ++ ++ val = refill_val; ++ val |= (MVNETA_TXQ_BUCKET_REFILL_PERIOD << ++ MVNETA_TXQ_BUCKET_REFILL_PERIOD_SHIFT); ++ ++ mvreg_write(pp, MVNETA_TXQ_BUCKET_REFILL_REG(queue), val); ++ ++ return 0; ++} ++ + static int mvneta_setup_mqprio(struct net_device *dev, + struct tc_mqprio_qopt_offload *mqprio) + { + struct mvneta_port *pp = netdev_priv(dev); +- int rxq, tc; ++ int rxq, txq, tc, ret; + u8 num_tc; + + if (mqprio->qopt.hw != TC_MQPRIO_HW_OFFLOAD_TCS) +@@ -4924,6 +5014,7 @@ static int mvneta_setup_mqprio(struct net_device *dev, + mvneta_clear_rx_prio_map(pp); + + if (!num_tc) { ++ mvneta_disable_per_queue_rate_limit(pp); + netdev_reset_tc(dev); + return 0; + } +@@ -4944,6 +5035,33 @@ static int mvneta_setup_mqprio(struct net_device *dev, + } + } + ++ if (mqprio->shaper != TC_MQPRIO_SHAPER_BW_RATE) { ++ mvneta_disable_per_queue_rate_limit(pp); ++ return 0; ++ } ++ ++ if (mqprio->qopt.num_tc > txq_number) ++ return -EINVAL; ++ ++ ret = mvneta_enable_per_queue_rate_limit(pp); ++ if (ret) ++ return ret; ++ ++ for (tc = 0; tc < mqprio->qopt.num_tc; tc++) { ++ for (txq = mqprio->qopt.offset[tc]; ++ txq < mqprio->qopt.count[tc] + mqprio->qopt.offset[tc]; ++ txq++) { ++ if (txq >= txq_number) ++ return -EINVAL; ++ ++ ret = mvneta_setup_queue_rates(pp, txq, ++ mqprio->min_rate[tc], ++ mqprio->max_rate[tc]); ++ if (ret) ++ return ret; ++ } ++ } ++ + return 0; + } + +-- +cgit 1.2.3-1.el7 + |