diff options
Diffstat (limited to 'target/linux/mvebu')
53 files changed, 5140 insertions, 0 deletions
diff --git a/target/linux/mvebu/config-5.4 b/target/linux/mvebu/config-5.4 new file mode 100644 index 0000000000..24093fd386 --- /dev/null +++ b/target/linux/mvebu/config-5.4 @@ -0,0 +1,498 @@ +CONFIG_AHCI_MVEBU=y +CONFIG_ALIGNMENT_TRAP=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +CONFIG_ARCH_HAS_KCOV=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_ARCH_HAS_PHYS_TO_DMA=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_ARCH_HAS_TICK_BROADCAST=y +CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MULTIPLATFORM=y +CONFIG_ARCH_MULTI_V6_V7=y +CONFIG_ARCH_MULTI_V7=y +CONFIG_ARCH_MVEBU=y +CONFIG_ARCH_NR_GPIO=0 +CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y +CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_ARM=y +CONFIG_ARMADA_370_CLK=y +CONFIG_ARMADA_370_XP_IRQ=y +CONFIG_ARMADA_370_XP_TIMER=y +CONFIG_ARMADA_38X_CLK=y +CONFIG_ARMADA_THERMAL=y +CONFIG_ARMADA_XP_CLK=y +CONFIG_ARM_APPENDED_DTB=y +# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set +CONFIG_ARM_ATAG_DTB_COMPAT=y +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set +# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y +CONFIG_ARM_CPU_SUSPEND=y +CONFIG_ARM_CRYPTO=y +CONFIG_ARM_ERRATA_720789=y +CONFIG_ARM_ERRATA_764369=y +CONFIG_ARM_GIC=y +CONFIG_ARM_GLOBAL_TIMER=y +CONFIG_ARM_HAS_SG_CHAIN=y +CONFIG_ARM_HEAVY_MB=y +CONFIG_ARM_L1_CACHE_SHIFT=6 +CONFIG_ARM_L1_CACHE_SHIFT_6=y +# CONFIG_ARM_LPAE is not set +CONFIG_ARM_MVEBU_V7_CPUIDLE=y +CONFIG_ARM_PATCH_IDIV=y +CONFIG_ARM_PATCH_PHYS_VIRT=y +CONFIG_ARM_THUMB=y +# CONFIG_ARM_THUMBEE is not set +CONFIG_ARM_UNWIND=y +CONFIG_ARM_VIRT_EXT=y +CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y +CONFIG_ATA=y +CONFIG_ATAGS=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_SD=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BOUNCE=y +# CONFIG_CACHE_FEROCEON_L2 is not set +CONFIG_CACHE_L2X0=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y +CONFIG_CLKSRC_MMIO=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_COMMON_CLK=y +CONFIG_CPUFREQ_DT=y +CONFIG_CPUFREQ_DT_PLATDEV=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v7=y +CONFIG_CPU_ABRT_EV7=y +# CONFIG_CPU_BIG_ENDIAN is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +CONFIG_CPU_CACHE_V7=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +CONFIG_CPU_FREQ_GOV_ATTR_SET=y +CONFIG_CPU_FREQ_GOV_COMMON=y +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_HAS_ASID=y +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_CPU_ICACHE_DISABLE is not set +CONFIG_CPU_IDLE=y +CONFIG_CPU_IDLE_GOV_LADDER=y +CONFIG_CPU_PABRT_V7=y +CONFIG_CPU_PJ4B=y +CONFIG_CPU_PM=y +CONFIG_CPU_RMAP=y +CONFIG_CPU_SPECTRE=y +CONFIG_CPU_THERMAL=y +CONFIG_CPU_THUMB_CAPABLE=y +CONFIG_CPU_TLB_V7=y +CONFIG_CPU_V7=y +CONFIG_CRC16=y +CONFIG_CRYPTO_ACOMP2=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_AES_ARM=y +CONFIG_CRYPTO_AES_ARM_BS=y +# CONFIG_CRYPTO_AES_ARM_CE is not set +# CONFIG_CRYPTO_CHACHA20_NEON is not set +CONFIG_CRYPTO_CRC32=y +CONFIG_CRYPTO_CRC32C=y +# CONFIG_CRYPTO_CRC32_ARM_CE is not set +CONFIG_CRYPTO_CRYPTD=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_DES=y +CONFIG_CRYPTO_DEV_MARVELL_CESA=y +# CONFIG_CRYPTO_GHASH_ARM_CE is not set +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_HW=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_NULL2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_SHA1=y +CONFIG_CRYPTO_SHA1_ARM=y +# CONFIG_CRYPTO_SHA1_ARM_CE is not set +CONFIG_CRYPTO_SHA1_ARM_NEON=y +CONFIG_CRYPTO_SHA256_ARM=y +# CONFIG_CRYPTO_SHA2_ARM_CE is not set +CONFIG_CRYPTO_SHA512_ARM=y +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_DCACHE_WORD_ACCESS=y +CONFIG_DEBUG_ALIGN_RODATA=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" +CONFIG_DEBUG_MVEBU_UART0=y +# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set +# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set +CONFIG_DEBUG_UART_8250=y +# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set +CONFIG_DEBUG_UART_8250_SHIFT=2 +# CONFIG_DEBUG_UART_8250_WORD is not set +CONFIG_DEBUG_UART_PHYS=0xd0012000 +CONFIG_DEBUG_UART_VIRT=0xfec12000 +CONFIG_DEBUG_UNCOMPRESS=y +CONFIG_DEBUG_USER=y +CONFIG_DMADEVICES=y +CONFIG_DMA_ENGINE=y +CONFIG_DMA_ENGINE_RAID=y +CONFIG_DMA_OF=y +CONFIG_DTC=y +CONFIG_EARLY_PRINTK=y +CONFIG_EDAC_ATOMIC_SCRUB=y +CONFIG_EDAC_SUPPORT=y +CONFIG_EXT4_FS=y +CONFIG_EXTCON=y +# CONFIG_F2FS_CHECK_FS is not set +CONFIG_F2FS_FS=y +# CONFIG_F2FS_FS_SECURITY is not set +CONFIG_F2FS_FS_XATTR=y +CONFIG_F2FS_STAT_FS=y +CONFIG_FIXED_PHY=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_FS_IOMAP=y +CONFIG_FS_MBCACHE=y +CONFIG_GENERIC_ALLOCATOR=y +CONFIG_GENERIC_ARCH_TOPOLOGY=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_CPU_AUTOPROBE=y +CONFIG_GENERIC_EARLY_IOREMAP=y +CONFIG_GENERIC_IDLE_POLL_SETUP=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_GENERIC_IRQ_MULTI_HANDLER=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_SHOW_LEVEL=y +CONFIG_GENERIC_MSI_IRQ=y +CONFIG_GENERIC_MSI_IRQ_DOMAIN=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_PHY=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_STRNCPY_FROM_USER=y +CONFIG_GENERIC_STRNLEN_USER=y +CONFIG_GLOB=y +CONFIG_GPIOLIB=y +CONFIG_GPIOLIB_IRQCHIP=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_MVEBU=y +CONFIG_GPIO_PCA953X=y +CONFIG_GPIO_PCA953X_IRQ=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDEN_BRANCH_PREDICTOR=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +CONFIG_HAVE_ARCH_AUDITSYSCALL=y +CONFIG_HAVE_ARCH_BITREVERSE=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_PFN_VALID=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_ARM_SCU=y +CONFIG_HAVE_ARM_SMCCC=y +CONFIG_HAVE_ARM_TWD=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CLK_PREPARE=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_LD_DEAD_CODE_DATA_ELIMINATION=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_PROC_CPU=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_SMP=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_UID16=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HIGHMEM=y +# CONFIG_HIGHPTE is not set +CONFIG_HOTPLUG_CPU=y +CONFIG_HWBM=y +CONFIG_HWMON=y +CONFIG_HW_RANDOM=y +CONFIG_HZ_FIXED=0 +CONFIG_HZ_PERIODIC=y +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_PXA is not set +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_DOMAIN_HIERARCHY=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_WORK=y +# CONFIG_IWMMXT is not set +CONFIG_JBD2=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PCA963X=y +CONFIG_LEDS_TLC591XX=y +CONFIG_LEDS_TRIGGER_DISK=y +CONFIG_LIBFDT=y +CONFIG_LOCK_DEBUGGING_SUPPORT=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MACH_ARMADA_370=y +# CONFIG_MACH_ARMADA_375 is not set +CONFIG_MACH_ARMADA_38X=y +# CONFIG_MACH_ARMADA_39X is not set +CONFIG_MACH_ARMADA_XP=y +# CONFIG_MACH_DOVE is not set +CONFIG_MACH_MVEBU_ANY=y +CONFIG_MACH_MVEBU_V7=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_MANGLE_BOOTARGS=y +CONFIG_MARVELL_PHY=y +CONFIG_MDIO_BUS=y +CONFIG_MDIO_DEVICE=y +CONFIG_MDIO_I2C=y +CONFIG_MEMFD_CREATE=y +CONFIG_MEMORY=y +CONFIG_MIGHT_HAVE_CACHE_L2X0=y +CONFIG_MIGHT_HAVE_PCI=y +CONFIG_MIGRATION=y +CONFIG_MMC=y +CONFIG_MMC_BLOCK=y +CONFIG_MMC_MVSDIO=y +CONFIG_MMC_SDHCI=y +# CONFIG_MMC_SDHCI_PCI is not set +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_PXAV3=y +# CONFIG_MMC_TIFM_SD is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_STAA=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_MARVELL=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_MVEBU_CLK_COMMON=y +CONFIG_MVEBU_CLK_COREDIV=y +CONFIG_MVEBU_CLK_CPU=y +CONFIG_MVEBU_DEVBUS=y +CONFIG_MVEBU_MBUS=y +CONFIG_MVMDIO=y +CONFIG_MVNETA=y +CONFIG_MVNETA_BM=y +CONFIG_MVNETA_BM_ENABLE=y +CONFIG_MVPP2=y +CONFIG_MVSW61XX_PHY=y +CONFIG_MV_XOR=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEON=y +CONFIG_NET_DSA=y +CONFIG_NET_DSA_MV88E6XXX=y +CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y +# CONFIG_NET_DSA_MV88E6XXX_PTP is not set +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NET_SWITCHDEV=y +CONFIG_NLS=y +CONFIG_NOP_USB_XCEIV=y +CONFIG_NO_BOOTMEM=y +CONFIG_NR_CPUS=4 +CONFIG_NVMEM=y +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_KOBJ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_OF_RESERVED_MEM=y +CONFIG_OLD_SIGACTION=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_ORION_WATCHDOG=y +CONFIG_OUTER_CACHE=y +CONFIG_OUTER_CACHE_SYNC=y +CONFIG_PADATA=y +CONFIG_PAGE_OFFSET=0xC0000000 +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_DOMAINS_GENERIC=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_MVEBU=y +# CONFIG_PCI_V3_SEMI is not set +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PHYLINK=y +# CONFIG_PHY_MVEBU_A3700_COMPHY is not set +# CONFIG_PHY_MVEBU_CP110_COMPHY is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_ARMADA_370=y +CONFIG_PINCTRL_ARMADA_38X=y +CONFIG_PINCTRL_ARMADA_XP=y +CONFIG_PINCTRL_MVEBU=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PJ4B_ERRATA_4742=y +# CONFIG_PL310_ERRATA_588369 is not set +# CONFIG_PL310_ERRATA_727915 is not set +CONFIG_PL310_ERRATA_753970=y +# CONFIG_PL310_ERRATA_769419 is not set +CONFIG_PLAT_ORION=y +CONFIG_PM_OPP=y +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11 +CONFIG_PWM=y +CONFIG_PWM_SYSFS=y +CONFIG_RATIONAL=y +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_REFCOUNT_FULL=y +CONFIG_REGMAP=y +CONFIG_REGMAP_I2C=y +CONFIG_REGMAP_MMIO=y +CONFIG_REGMAP_SPI=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_ARMADA38X=y +CONFIG_RTC_DRV_MV=y +CONFIG_RTC_I2C_AND_SPI=y +CONFIG_RTC_MC146818_LIB=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_SATA_MV=y +CONFIG_SATA_PMP=y +CONFIG_SCSI=y +CONFIG_SENSORS_PWM_FAN=y +CONFIG_SENSORS_TMP421=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_8250_FSL=y +CONFIG_SERIAL_MVEBU_CONSOLE=y +CONFIG_SERIAL_MVEBU_UART=y +CONFIG_SFP=y +CONFIG_SGL_ALLOC=y +CONFIG_SG_POOL=y +CONFIG_SMP=y +CONFIG_SMP_ON_UP=y +CONFIG_SOC_BUS=y +CONFIG_SPARSE_IRQ=y +CONFIG_SPI=y +# CONFIG_SPI_ARMADA_3700 is not set +CONFIG_SPI_MASTER=y +CONFIG_SPI_MEM=y +CONFIG_SPI_ORION=y +CONFIG_SRAM=y +CONFIG_SRAM_EXEC=y +CONFIG_SRCU=y +CONFIG_SWCONFIG=y +CONFIG_SWPHY=y +CONFIG_SWP_EMULATE=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_THERMAL=y +CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_GOV_STEP_WISE=y +CONFIG_THERMAL_HWMON=y +CONFIG_THERMAL_OF=y +# CONFIG_THUMB2_KERNEL is not set +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_TIMER_OF=y +CONFIG_TIMER_PROBE=y +CONFIG_TREE_RCU=y +CONFIG_TREE_SRCU=y +CONFIG_UBIFS_FS=y +# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" +CONFIG_USB=y +CONFIG_USB_COMMON=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_ORION=y +CONFIG_USB_EHCI_HCD_PLATFORM=y +CONFIG_USB_LEDS_TRIGGER_USBPORT=y +CONFIG_USB_PHY=y +CONFIG_USB_STORAGE=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_MVEBU=y +CONFIG_USB_XHCI_PLATFORM=y +CONFIG_USE_OF=y +CONFIG_VFP=y +CONFIG_VFPv3=y +CONFIG_WATCHDOG_CORE=y +CONFIG_XPS=y +CONFIG_XZ_DEC_ARM=y +CONFIG_XZ_DEC_BCJ=y +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/mvebu/cortexa53/config-5.4 b/target/linux/mvebu/cortexa53/config-5.4 new file mode 100644 index 0000000000..7f3c2b21de --- /dev/null +++ b/target/linux/mvebu/cortexa53/config-5.4 @@ -0,0 +1,169 @@ +CONFIG_64BIT=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_ARCH_INLINE_READ_LOCK=y +CONFIG_ARCH_INLINE_READ_LOCK_BH=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_READ_UNLOCK=y +CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_SPIN_LOCK=y +CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_WRITE_LOCK=y +CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=24 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARM64=y +# CONFIG_ARM64_16K_PAGES is not set +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_64K_PAGES is not set +CONFIG_ARM64_CONT_SHIFT=4 +# CONFIG_ARM64_CRYPTO is not set +# CONFIG_ARM64_HW_AFDBM is not set +# CONFIG_ARM64_LSE_ATOMICS is not set +CONFIG_ARM64_PAGE_SHIFT=12 +# CONFIG_ARM64_PAN is not set +CONFIG_ARM64_PA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +# CONFIG_ARM64_PMEM is not set +# CONFIG_ARM64_PTDUMP_DEBUGFS is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +CONFIG_ARM64_SSBD=y +CONFIG_ARM64_SVE=y +# CONFIG_ARM64_UAO is not set +CONFIG_ARM64_VA_BITS=39 +CONFIG_ARM64_VA_BITS_39=y +# CONFIG_ARM64_VA_BITS_48 is not set +# CONFIG_ARM64_VHE is not set +CONFIG_ARMADA_37XX_CLK=y +CONFIG_ARMADA_AP806_SYSCON=y +CONFIG_ARMADA_CP110_SYSCON=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_ARMADA_37XX_CPUFREQ=y +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_GIC_V3_ITS_PCI=y +# CONFIG_ARM_PL172_MPMC is not set +CONFIG_ARM_PSCI_FW=y +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +# CONFIG_DEBUG_ALIGN_RODATA is not set +CONFIG_DMA_DIRECT_OPS=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_ARCH_KASAN=y +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_HAVE_GENERIC_GUP=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HOLES_IN_ZONE=y +# CONFIG_HUGETLBFS is not set +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_INLINE_READ_LOCK=y +CONFIG_INLINE_READ_LOCK_BH=y +CONFIG_INLINE_READ_LOCK_IRQ=y +CONFIG_INLINE_READ_LOCK_IRQSAVE=y +CONFIG_INLINE_READ_UNLOCK_BH=y +CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y +CONFIG_INLINE_SPIN_LOCK=y +CONFIG_INLINE_SPIN_LOCK_BH=y +CONFIG_INLINE_SPIN_LOCK_IRQ=y +CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y +CONFIG_INLINE_SPIN_TRYLOCK=y +CONFIG_INLINE_SPIN_TRYLOCK_BH=y +CONFIG_INLINE_SPIN_UNLOCK_BH=y +CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y +CONFIG_INLINE_WRITE_LOCK=y +CONFIG_INLINE_WRITE_LOCK_BH=y +CONFIG_INLINE_WRITE_LOCK_IRQ=y +CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y +CONFIG_INLINE_WRITE_UNLOCK_BH=y +CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y +CONFIG_MFD_SYSCON=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_MVEBU_GICP=y +CONFIG_MVEBU_ICU=y +CONFIG_MVEBU_ODMI=y +CONFIG_MVEBU_PIC=y +CONFIG_NEED_SG_DMA_LENGTH=y +# CONFIG_NUMA is not set +CONFIG_PARTITION_PERCPU=y +CONFIG_PCI_AARDVARK=y +CONFIG_PGTABLE_LEVELS=3 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PHY_MVEBU_A3700_COMPHY=y +CONFIG_PINCTRL_ARMADA_37XX=y +CONFIG_PINCTRL_ARMADA_AP806=y +CONFIG_PINCTRL_ARMADA_CP110=y +CONFIG_POWER_RESET=y +CONFIG_POWER_SUPPLY=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +# CONFIG_RANDOMIZE_BASE is not set +CONFIG_REGULATOR_GPIO=y +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SPARSEMEM=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPI_ARMADA_3700=y +CONFIG_SWIOTLB=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_VMAP_STACK=y +CONFIG_ZONE_DMA32=y diff --git a/target/linux/mvebu/cortexa72/config-5.4 b/target/linux/mvebu/cortexa72/config-5.4 new file mode 100644 index 0000000000..c78eb84372 --- /dev/null +++ b/target/linux/mvebu/cortexa72/config-5.4 @@ -0,0 +1,176 @@ +CONFIG_64BIT=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_ARCH_INLINE_READ_LOCK=y +CONFIG_ARCH_INLINE_READ_LOCK_BH=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_READ_UNLOCK=y +CONFIG_ARCH_INLINE_READ_UNLOCK_BH=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_READ_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_SPIN_LOCK=y +CONFIG_ARCH_INLINE_SPIN_LOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK=y +CONFIG_ARCH_INLINE_SPIN_TRYLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_BH=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_SPIN_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_INLINE_WRITE_LOCK=y +CONFIG_ARCH_INLINE_WRITE_LOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_LOCK_IRQSAVE=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_BH=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_INLINE_WRITE_UNLOCK_IRQRESTORE=y +CONFIG_ARCH_MMAP_RND_BITS=18 +CONFIG_ARCH_MMAP_RND_BITS_MAX=24 +CONFIG_ARCH_MMAP_RND_BITS_MIN=18 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11 +CONFIG_ARCH_PROC_KCORE_TEXT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_SUPPORTS_INT128=y +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_FRAME_POINTERS=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_ARM64=y +# CONFIG_ARM64_16K_PAGES is not set +CONFIG_ARM64_4K_PAGES=y +# CONFIG_ARM64_64K_PAGES is not set +CONFIG_ARM64_CONT_SHIFT=4 +# CONFIG_ARM64_CRYPTO is not set +# CONFIG_ARM64_HW_AFDBM is not set +# CONFIG_ARM64_LSE_ATOMICS is not set +CONFIG_ARM64_PAGE_SHIFT=12 +# CONFIG_ARM64_PAN is not set +CONFIG_ARM64_PA_BITS=48 +CONFIG_ARM64_PA_BITS_48=y +# CONFIG_ARM64_PMEM is not set +# CONFIG_ARM64_PTDUMP_DEBUGFS is not set +# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set +CONFIG_ARM64_SSBD=y +CONFIG_ARM64_SVE=y +# CONFIG_ARM64_UAO is not set +CONFIG_ARM64_VA_BITS=39 +CONFIG_ARM64_VA_BITS_39=y +# CONFIG_ARM64_VA_BITS_48 is not set +# CONFIG_ARM64_VHE is not set +CONFIG_ARMADA_37XX_CLK=y +CONFIG_ARMADA_AP806_SYSCON=y +CONFIG_ARMADA_CP110_SYSCON=y +CONFIG_ARM_AMBA=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y +CONFIG_ARM_GIC_V2M=y +CONFIG_ARM_GIC_V3=y +CONFIG_ARM_GIC_V3_ITS=y +CONFIG_ARM_GIC_V3_ITS_PCI=y +# CONFIG_ARM_PL172_MPMC is not set +CONFIG_ARM_PSCI_FW=y +# CONFIG_ARM_SP805_WATCHDOG is not set +CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y +# CONFIG_DEBUG_ALIGN_RODATA is not set +CONFIG_DMA_DIRECT_OPS=y +# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FRAME_POINTER=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_GENERIC_CSUM=y +CONFIG_GENERIC_PINCONF=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_HAVE_ARCH_KASAN=y +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_DEBUG_BUGVERBOSE=y +CONFIG_HAVE_GENERIC_GUP=y +CONFIG_HAVE_MEMORY_PRESENT=y +CONFIG_HAVE_PATA_PLATFORM=y +CONFIG_HAVE_RCU_TABLE_FREE=y +CONFIG_HOLES_IN_ZONE=y +# CONFIG_HUGETLBFS is not set +CONFIG_HW_RANDOM_OMAP=y +CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 +CONFIG_INLINE_READ_LOCK=y +CONFIG_INLINE_READ_LOCK_BH=y +CONFIG_INLINE_READ_LOCK_IRQ=y +CONFIG_INLINE_READ_LOCK_IRQSAVE=y +CONFIG_INLINE_READ_UNLOCK_BH=y +CONFIG_INLINE_READ_UNLOCK_IRQRESTORE=y +CONFIG_INLINE_SPIN_LOCK=y +CONFIG_INLINE_SPIN_LOCK_BH=y +CONFIG_INLINE_SPIN_LOCK_IRQ=y +CONFIG_INLINE_SPIN_LOCK_IRQSAVE=y +CONFIG_INLINE_SPIN_TRYLOCK=y +CONFIG_INLINE_SPIN_TRYLOCK_BH=y +CONFIG_INLINE_SPIN_UNLOCK_BH=y +CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE=y +CONFIG_INLINE_WRITE_LOCK=y +CONFIG_INLINE_WRITE_LOCK_BH=y +CONFIG_INLINE_WRITE_LOCK_IRQ=y +CONFIG_INLINE_WRITE_LOCK_IRQSAVE=y +CONFIG_INLINE_WRITE_UNLOCK_BH=y +CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE=y +CONFIG_MARVELL_10G_PHY=y +CONFIG_MFD_SYSCON=y +CONFIG_MMC_SDHCI_XENON=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_MVEBU_GICP=y +CONFIG_MVEBU_ICU=y +CONFIG_MVEBU_ODMI=y +CONFIG_MVEBU_PIC=y +CONFIG_MV_XOR_V2=y +CONFIG_NEED_SG_DMA_LENGTH=y +# CONFIG_NUMA is not set +CONFIG_PARTITION_PERCPU=y +CONFIG_PCIEAER=y +CONFIG_PCIEPORTBUS=y +CONFIG_PCIE_ARMADA_8K=y +CONFIG_PCIE_DW=y +CONFIG_PCIE_DW_HOST=y +# CONFIG_PCI_AARDVARK is not set +CONFIG_PGTABLE_LEVELS=3 +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_PHY_MVEBU_CP110_COMPHY=y +CONFIG_PINCTRL_ARMADA_37XX=y +CONFIG_PINCTRL_ARMADA_AP806=y +CONFIG_PINCTRL_ARMADA_CP110=y +CONFIG_POWER_RESET=y +CONFIG_POWER_SUPPLY=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +# CONFIG_RANDOMIZE_BASE is not set +CONFIG_RAS=y +CONFIG_REGULATOR_GPIO=y +# CONFIG_SERIAL_AMBA_PL011 is not set +CONFIG_SPARSEMEM=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SWIOTLB=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_SUPPORTS_HUGETLBFS=y +CONFIG_THREAD_INFO_IN_TASK=y +CONFIG_UNMAP_KERNEL_AT_EL0=y +CONFIG_VMAP_STACK=y +CONFIG_ZONE_DMA32=y diff --git a/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts new file mode 100644 index 0000000000..6b8a964ab3 --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Buffalo LinkStation LS421DE + * + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com> + */ + +/dts-v1/; + +#include "armada-370.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Buffalo LinkStation LS421DE"; + compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp"; + + aliases { + led-boot = &led_boot; + led-failsafe = &led_failsafe; + led-running = &led_power; + led-upgrade = &led_upgrade; + }; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk noinitrd rootfstype=squashfs"; + stdout-path = "serial0:115200n8"; + append-rootblock = "nullparameter="; /* override the bootloader args */ + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; + }; + + gpio_fan { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH + &gpio0 14 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_hdd_present &pmx_buttons>; + pinctrl-names = "default"; + + hdd1-present { + label = "HDD1 Present"; + linux,code = <KEY_PROG1>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + hdd2-present { + label = "HDD2 Present"; + linux,code = <KEY_PROG2>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + + }; + + power { + label = "Power Switch"; + linux,code = <KEY_POWER>; + linux,input-type = <EV_SW>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + function { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_leds1 &pmx_leds2>; + + system_red { + label = "ls421de:red:system"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + led_power: power_white { + label = "ls421de:white:power"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_failsafe: power_red { + label = "ls421de:red:power"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + led_upgrade: power_orange { + label = "ls421de:orange:power"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; + + led_boot: system_white { + label = "ls421de:white:system"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + hdd1_red { + label = "ls421de:red:hdd1"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + + hdd2_red { + label = "ls421de:red:hdd2"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; + + pinctrl-names = "default"; + + usb_v5_regulator: usb-v5-regulator { + compatible = "regulator-fixed"; + regulator-name = "USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; + + ata1_regulator: ata1-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "HDD1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + ata2_regulator: ata2-regulator { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + /* FIXME: this driver needs to be aware of the LED2 eth phy use, + which must be set to off state before shutting down the machine */ + restart_poweroff { + compatible = "restart-poweroff"; + }; +}; + +ð1 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { /* Marvell 88E1518 */ + reg = <0>; + /* LED2 is used to inform uBoot if the power-switch was slided + to the "off" position, and then power off the machine. + Page 0x3, Register 0x10, bit 8: + 0x800: LED2 off, power off the machine + 0x900: LED2 on, boot the machine */ + marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */ + <0x3 0x11 0x1 0x4401>, /* LED polarity */ + <0x3 0x12 0x1 0x4905>; /* LED Timer */ + }; +}; + +&pciec { + status = "okay"; + /* Connected to uPD720202 USB 3.0 Host */ + pcie@1,0 { + status = "okay"; + }; +}; + +&pmsu { + pinctrl-0 = <&pmx_power_cpu>; + pinctrl-names = "default"; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + nr-ports = <2>; + status = "okay"; +}; + +&sdio { + pinctrl-0 = <&sdio_pins2>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x02000000>; /* 32 MiB */ + }; + + partition@2000000 { + label = "ubi"; + reg = <0x02000000 0x1e000000>; /* 480 MiB */ + }; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000 0xf0000>; /* 960 KiB*/ + label = "u-boot"; + read-only; + }; + partition@f0000 { + reg = <0xf0000 0x10000>; /* 64 KiB */ + label = "u-boot-env"; + }; + }; + }; +}; + +&pinctrl { + pmx_power_cpu: pmx-power-cpu { + marvell,pins = "mpp4"; + marvell,function = "vdd"; + }; + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp5"; + marvell,function = "gpo"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_power_hdd2: pmx-power-hdd2 { + marvell,pins = "mpp9"; + marvell,function = "gpo"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + pmx_hdd_present: pmx-hdd-present { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_buttons: pmx-buttons { + marvell,pins = "mpp15", "mpp16"; + marvell,function = "gpio"; + }; + pmx_leds1: pmx-leds { + marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; + marvell,function = "gpo"; + }; + pmx_leds2: pmx-leds { + marvell,pins = "mpp55", "mpp57", "mpp62"; + marvell,function = "gpio"; + }; +}; diff --git a/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-385-linksys-venom.dts new file mode 100644 index 0000000000..c152c14c6b --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm/boot/dts/armada-385-linksys-venom.dts @@ -0,0 +1,213 @@ +/* + * Device Tree file for the Linksys WRT32X (Venom) + * + * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT32X"; + compatible = "linksys,venom", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + append-rootblock = "root=/dev/mtdblock"; + }; +}; + +&expander0 { + wan_amber@0 { + label = "venom:amber:wan"; + reg = <0x0>; + }; + + wan_blue@1 { + label = "venom:blue:wan"; + reg = <0x1>; + }; + + usb2@5 { + label = "venom:blue:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "venom:blue:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "venom:blue:usb3_2"; + reg = <0x7>; + }; + + wps_blue@8 { + label = "venom:blue:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "venom:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + label = "venom:blue:power"; + }; + + sata { + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + label = "venom:blue:sata"; + }; + + wlan_2g { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + label = "venom:blue:wlan_2g"; + }; + + wlan_5g { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + label = "venom:blue:wlan_5g"; + }; +}; + +&gpio_leds_pins { + marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; +}; + +&nand { + /* Spansion S34ML02G2 256MiB, OEM Layout */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KB */ + }; + + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@900000 { + label = "kernel1"; + reg = <0x900000 0x7b00000>; /* 123MB */ + }; + + partition@c00000 { + label = "rootfs1"; + reg = <0xc00000 0x7800000>; /* 120MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@8400000 { + label = "kernel2"; + reg = <0x8400000 0x7b00000>; /* 123MB */ + }; + + partition@8700000 { + label = "rootfs2"; + reg = <0x8700000 0x7800000>; /* 120MB */ + }; + + /* last MB is for the BBT, not writable */ + partition@ff00000 { + label = "BBT"; + reg = <0xff00000 0x100000>; + }; + }; +}; + + +&pcie1 { + mwlwifi { + marvell,chainmask = <4 4>; + }; +}; + +&pcie2 { + mwlwifi { + marvell,chainmask = <4 4>; + }; +}; + +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + no-1-8-v; + non-removable; + wp-inverted; + bus-width = <8>; + status = "okay"; +}; + +&usb3_1_vbus { + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; +}; + +&usb3_1_vbus_pins { + marvell,pins = "mpp44"; +}; diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 0000000000..ef90a1bd38 --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&sdhci0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 0000000000..2b565ca8d8 --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; +}; + +&ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; +}; + +&sdhci0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 0000000000..8a408c3c48 --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; +}; diff --git a/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts new file mode 100644 index 0000000000..5b722b4f83 --- /dev/null +++ b/target/linux/mvebu/files-5.4/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts @@ -0,0 +1,162 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device tree for the uDPU board. + * Based on Marvell Armada 3720 development board (DB-88F3720-DDR3) + * Copyright (C) 2016 Marvell + * Copyright (C) 2019 Methode Electronics + * Copyright (C) 2019 Telus + * + * Vladimir Vid <vladimir.vid@sartura.hr> + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "armada-372x.dtsi" + +/ { + model = "Methode uDPU Board"; + compatible = "methode,udpu", "marvell,armada3720"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x00000000 0x00000000 0x00000000 0x20000000>; + }; + + leds { + pinctrl-names = "default"; + compatible = "gpio-leds"; + + power1 { + label = "udpu:green:power"; + gpios = <&gpionb 11 GPIO_ACTIVE_LOW>; + }; + + power2 { + label = "udpu:red:power"; + gpios = <&gpionb 12 GPIO_ACTIVE_LOW>; + }; + + network1 { + label = "udpu:green:network"; + gpios = <&gpionb 13 GPIO_ACTIVE_LOW>; + }; + + network2 { + label = "udpu:red:network"; + gpios = <&gpionb 14 GPIO_ACTIVE_LOW>; + }; + + alarm1 { + label = "udpu:green:alarm"; + gpios = <&gpionb 15 GPIO_ACTIVE_LOW>; + }; + + alarm2 { + label = "udpu:red:alarm"; + gpios = <&gpionb 16 GPIO_ACTIVE_LOW>; + }; + }; + + sfp_eth0: sfp-eth0 { + compatible = "sff,sfp"; + i2c-bus = <&i2c0>; + los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; + }; + + sfp_eth1: sfp-eth1 { + compatible = "sff,sfp"; + i2c-bus = <&i2c1>; + los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>; + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; + }; +}; + +&sdhci0 { + status = "okay"; + bus-width = <8>; + mmc-ddr-1_8v; + mmc-hs400-1_8v; + marvell,pad-type = "fixed-1-8v"; + non-removable; + no-sd; + no-sdio; +}; + +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <54000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + /* only bootloader is located on the SPI */ + partition@0 { + label = "uboot"; + reg = <0 0x400000>; + }; + }; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + + lm75@48 { + status = "okay"; + compatible = "lm75"; + reg = <0x48>; + }; + + lm75@49 { + status = "okay"; + compatible = "lm75"; + reg = <0x49>; + }; +}; + +ð0 { + status = "okay"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sfp_eth0>; +}; + +ð1 { + status = "okay"; + phy-mode = "sgmii"; + managed = "in-band-status"; + sfp = <&sfp_eth1>; +}; + +&usb3 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/target/linux/mvebu/patches-5.4/002-add_powertables.patch b/target/linux/mvebu/patches-5.4/002-add_powertables.patch new file mode 100644 index 0000000000..c2fb748d5d --- /dev/null +++ b/target/linux/mvebu/patches-5.4/002-add_powertables.patch @@ -0,0 +1,770 @@ +--- a/arch/arm/boot/dts/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +@@ -212,11 +212,19 @@ + &pcie1 { + /* Marvell 88W8864, 5GHz-only */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,2ghz = <0>; ++ }; + }; + + &pcie2 { + /* Marvell 88W8864, 2GHz-only */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,5ghz = <0>; ++ }; + }; + + &pinctrl { +--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts ++++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts +@@ -142,3 +142,205 @@ + }; + }; + }; ++ ++&pcie1 { ++ mwlwifi { ++ marvell,chainmask = <2 2>; ++ marvell,powertable { ++ AU = ++ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>, ++ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, ++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, ++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, ++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>, ++ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>; ++ CA = ++ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, ++ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, ++ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, ++ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>; ++ CN = ++ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>, ++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, ++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, ++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>, ++ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>; ++ ETSI = ++ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>, ++ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>; ++ FCC = ++ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>, ++ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>; ++ }; ++ }; ++}; ++ ++&pcie2 { ++ mwlwifi { ++ marvell,chainmask = <2 2>; ++ marvell,powertable { ++ AU = ++ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; ++ CA = ++ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>, ++ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>, ++ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>; ++ CN = ++ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; ++ ETSI = ++ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>; ++ FCC = ++ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts ++++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts +@@ -142,3 +142,205 @@ + }; + }; + }; ++ ++&pcie1 { ++ mwlwifi { ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ AU = ++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>; ++ CA = ++ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; ++ CN = ++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>; ++ ETSI = ++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>; ++ FCC = ++ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>, ++ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, ++ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, ++ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; ++ }; ++ }; ++}; ++ ++&pcie2 { ++ mwlwifi { ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ AU = ++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; ++ CA = ++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; ++ CN = ++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; ++ ETSI = ++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; ++ FCC = ++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts ++++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts +@@ -142,3 +142,205 @@ + }; + }; + }; ++ ++&pcie1 { ++ mwlwifi { ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ AU = ++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>, ++ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>; ++ CA = ++ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; ++ CN = ++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>, ++ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>; ++ ETSI = ++ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>, ++ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>; ++ FCC = ++ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>, ++ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, ++ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, ++ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>, ++ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>, ++ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>, ++ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>, ++ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>; ++ }; ++ }; ++}; ++ ++&pcie2 { ++ mwlwifi { ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ AU = ++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; ++ CA = ++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; ++ CN = ++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; ++ ETSI = ++ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>; ++ FCC = ++ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>; ++ }; ++ }; ++}; +--- a/arch/arm/boot/dts/armada-385-linksys-rango.dts ++++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts +@@ -157,6 +157,18 @@ + }; + }; + ++&pcie1 { ++ mwlwifi { ++ marvell,chainmask = <4 4>; ++ }; ++}; ++ ++&pcie2 { ++ mwlwifi { ++ marvell,chainmask = <4 4>; ++ }; ++}; ++ + &sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -272,12 +272,100 @@ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,5ghz = <0>; ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ FCC = ++ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>; ++ ++ ETSI = ++ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>, ++ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>; ++ }; ++ }; + }; + + /* Second mini-PCIe port */ + pcie@3,0 { + /* Port 0, Lane 3 */ + status = "okay"; ++ ++ mwlwifi { ++ marvell,2ghz = <0>; ++ marvell,chainmask = <4 4>; ++ marvell,powertable { ++ FCC = ++ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>, ++ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>, ++ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>, ++ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>, ++ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>; ++ ++ ETSI = ++ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>, ++ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>; ++ }; ++ }; + }; + }; + diff --git a/target/linux/mvebu/patches-5.4/003-add_switch_nodes.patch b/target/linux/mvebu/patches-5.4/003-add_switch_nodes.patch new file mode 100644 index 0000000000..b208638916 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/003-add_switch_nodes.patch @@ -0,0 +1,40 @@ +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -257,6 +257,16 @@ + }; + }; + }; ++ ++ mvsw61xx { ++ compatible = "marvell,88e6172"; ++ status = "okay"; ++ reg = <0x10>; ++ ++ mii-bus = <&mdio>; ++ cpu-port-0 = <5>; ++ cpu-port-1 = <6>; ++ }; + }; + + &pciec { +--- a/arch/arm/boot/dts/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +@@ -82,6 +82,18 @@ + linux,default-trigger = "disk-activity"; + }; + }; ++ ++ mvsw61xx { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "marvell,88e6176"; ++ status = "okay"; ++ reg = <0x10>; ++ ++ mii-bus = <&mdio>; ++ cpu-port-0 = <5>; ++ cpu-port-1 = <6>; ++ }; + }; + + &ahci0 { diff --git a/target/linux/mvebu/patches-5.4/004-add_sata_disk_activity_trigger.patch b/target/linux/mvebu/patches-5.4/004-add_sata_disk_activity_trigger.patch new file mode 100644 index 0000000000..2cb8f25490 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/004-add_sata_disk_activity_trigger.patch @@ -0,0 +1,39 @@ +From 172230195068703b78ad5733a09492f5d6814c09 Mon Sep 17 00:00:00 2001 +From: Ansuel Smith <ansuelsmth@gmail.com> +Date: Tue, 28 Feb 2017 14:15:50 +0100 +Subject: [PATCH] ARM: dts: armada: Add default trigger for sata led + +In others board we have the sata led set to function +with the sata led trigger by default. +This patch makes the same for these board that have sata +led but get disabled by not associating it to any trigger. + +Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> +Acked-by: Jason Cooper <jason@lakedaemon.net> +Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> +--- + arch/arm/boot/dts/armada-385-linksys-caiman.dts | 1 + + arch/arm/boot/dts/armada-385-linksys-cobra.dts | 1 + + arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 1 + + 3 files changed, 3 insertions(+) + +--- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts ++++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts +@@ -68,6 +68,7 @@ + + sata { + label = "caiman:white:sata"; ++ linux,default-trigger = "disk-activity"; + }; + }; + +--- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts ++++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts +@@ -68,6 +68,7 @@ + + sata { + label = "cobra:white:sata"; ++ linux,default-trigger = "disk-activity"; + }; + }; + diff --git a/target/linux/mvebu/patches-5.4/005-linksys_hardcode_nand_ecc_settings.patch b/target/linux/mvebu/patches-5.4/005-linksys_hardcode_nand_ecc_settings.patch new file mode 100644 index 0000000000..dfe13bae7b --- /dev/null +++ b/target/linux/mvebu/patches-5.4/005-linksys_hardcode_nand_ecc_settings.patch @@ -0,0 +1,17 @@ +Newer Linksys boards might come with a Winbond W29N02GV which can be +configured in different ways. Make sure we configure it the same way +as the older chips so everything keeps working. + +Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + +--- a/arch/arm/boot/dts/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +@@ -160,6 +160,8 @@ + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; ++ nand-ecc-strength = <4>; ++ nand-ecc-step-size = <512>; + marvell,nand-keep-config; + nand-on-flash-bbt; + }; diff --git a/target/linux/mvebu/patches-5.4/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-5.4/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch new file mode 100644 index 0000000000..0cb9e99602 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch @@ -0,0 +1,201 @@ +From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001 +From: Adrian Panella <ianchi74@outlook.com> +Date: Thu, 9 Mar 2017 09:37:17 +0100 +Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments + +The command-line arguments provided by the boot loader will be +appended to a new device tree property: bootloader-args. +If there is a property "append-rootblock" in DT under /chosen +and a root= option in bootloaders command line it will be parsed +and added to DT bootargs with the form: <append-rootblock>XX. +Only command line ATAG will be processed, the rest of the ATAGs +sent by bootloader will be ignored. +This is usefull in dual boot systems, to get the current root partition +without afecting the rest of the system. + +Signed-off-by: Adrian Panella <ianchi74@outlook.com> + +This patch has been modified to be mvebu specific. The original patch +did not pass the bootloader cmdline on if no append-rootblock stanza +was found, resulting in blank cmdline and failure to boot. + +Signed-off-by: Michael Gray <michael.gray@lantisproject.com> +--- + arch/arm/Kconfig | 11 +++++ + arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++- + init/main.c | 16 ++++++++ + 3 files changed, 98 insertions(+), 1 deletion(-) + +--- a/arch/arm/Kconfig ++++ b/arch/arm/Kconfig +@@ -1926,6 +1926,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN + The command-line arguments provided by the boot loader will be + appended to the the device tree bootargs property. + ++config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ bool "Append rootblock parsing bootloader's kernel arguments" ++ help ++ The command-line arguments provided by the boot loader will be ++ appended to a new device tree property: bootloader-args. ++ If there is a property "append-rootblock" in DT under /chosen ++ and a root= option in bootloaders command line it will be parsed ++ and added to DT bootargs with the form: <append-rootblock>XX. ++ Only command line ATAG will be processed, the rest of the ATAGs ++ sent by bootloader will be ignored. ++ + endchoice + + config CMDLINE +--- a/arch/arm/boot/compressed/atags_to_fdt.c ++++ b/arch/arm/boot/compressed/atags_to_fdt.c +@@ -4,6 +4,8 @@ + + #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND) + #define do_extend_cmdline 1 ++#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#define do_extend_cmdline 1 + #else + #define do_extend_cmdline 0 + #endif +@@ -67,6 +69,65 @@ static uint32_t get_cell_size(const void + return cell_size; + } + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ ++static char *append_rootblock(char *dest, const char *str, int len, void *fdt) ++{ ++ char *ptr, *end; ++ char *root="root="; ++ int i, l; ++ const char *rootblock; ++ ++ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually ++ ptr = str - 1; ++ ++ do { ++ //first find an 'r' at the begining or after a space ++ do { ++ ptr++; ++ ptr = strchr(ptr, 'r'); ++ if(!ptr) return dest; ++ ++ } while (ptr != str && *(ptr-1) != ' '); ++ ++ //then check for the rest ++ for(i = 1; i <= 4; i++) ++ if(*(ptr+i) != *(root+i)) break; ++ ++ } while (i != 5); ++ ++ end = strchr(ptr, ' '); ++ end = end ? (end - 1) : (strchr(ptr, 0) - 1); ++ ++ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX ) ++ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++); ++ ptr = end + 1; ++ ++ /* if append-rootblock property is set use it to append to command line */ ++ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l); ++ if(rootblock != NULL) { ++ if(*dest != ' ') { ++ *dest = ' '; ++ dest++; ++ len++; ++ } ++ if (len + l + i <= COMMAND_LINE_SIZE) { ++ memcpy(dest, rootblock, l); ++ dest += l - 1; ++ memcpy(dest, ptr, i); ++ dest += i; ++ } ++ } else { ++ len = strlen(str); ++ if (len + 1 < COMMAND_LINE_SIZE) { ++ memcpy(dest, str, len); ++ dest += len; ++ } ++ } ++ return dest; ++} ++#endif ++ + static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) + { + char cmdline[COMMAND_LINE_SIZE]; +@@ -86,12 +147,21 @@ static void merge_fdt_bootargs(void *fdt + + /* and append the ATAG_CMDLINE */ + if (fdt_cmdline) { ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //save original bootloader args ++ //and append ubi.mtd with root partition number to current cmdline ++ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline); ++ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt); ++ ++#else + len = strlen(fdt_cmdline); + if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) { + *ptr++ = ' '; + memcpy(ptr, fdt_cmdline, len); + ptr += len; + } ++#endif + } + *ptr = '\0'; + +@@ -148,7 +218,9 @@ int atags_to_fdt(void *atag_list, void * + else + setprop_string(fdt, "/chosen", "bootargs", + atag->u.cmdline.cmdline); +- } else if (atag->hdr.tag == ATAG_MEM) { ++ } ++#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE ++ else if (atag->hdr.tag == ATAG_MEM) { + if (memcount >= sizeof(mem_reg_property)/4) + continue; + if (!atag->u.mem.size) +@@ -187,6 +259,10 @@ int atags_to_fdt(void *atag_list, void * + setprop(fdt, "/memory", "reg", mem_reg_property, + 4 * memcount * memsize); + } ++#else ++ ++ } ++#endif + + return fdt_pack(fdt); + } +--- a/init/main.c ++++ b/init/main.c +@@ -102,6 +102,10 @@ + #define CREATE_TRACE_POINTS + #include <trace/events/initcall.h> + ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++#include <linux/of.h> ++#endif ++ + static int kernel_init(void *); + + extern void init_IRQ(void); +@@ -591,6 +595,18 @@ asmlinkage __visible void __init start_k + page_alloc_init(); + + pr_notice("Kernel command line: %s\n", boot_command_line); ++ ++#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE) ++ //Show bootloader's original command line for reference ++ if(of_chosen) { ++ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL); ++ if(prop) ++ pr_notice("Bootloader command line (ignored): %s\n", prop); ++ else ++ pr_notice("Bootloader command line not present\n"); ++ } ++#endif ++ + /* parameters may set static keys */ + jump_label_init(); + parse_early_param(); diff --git a/target/linux/mvebu/patches-5.4/100-find_active_root.patch b/target/linux/mvebu/patches-5.4/100-find_active_root.patch new file mode 100644 index 0000000000..f52a5108b8 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/100-find_active_root.patch @@ -0,0 +1,60 @@ +The WRT1900AC among other Linksys routers uses a dual-firmware layout. +Dynamically rename the active partition to "ubi". + +Signed-off-by: Imre Kaloz <kaloz@openwrt.org> + +--- a/drivers/mtd/ofpart.c ++++ b/drivers/mtd/ofpart.c +@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d + return of_get_property(pp, "compatible", NULL); + } + ++static int mangled_rootblock; ++ + static int parse_fixed_partitions(struct mtd_info *master, + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +@@ -33,6 +35,7 @@ static int parse_fixed_partitions(struct + struct device_node *mtd_node; + struct device_node *ofpart_node; + const char *partname; ++ const char *owrtpart = "ubi"; + struct device_node *pp; + int nr_parts, i, ret = 0; + bool dedicated = true; +@@ -110,9 +113,13 @@ static int parse_fixed_partitions(struct + parts[i].size = of_read_number(reg + a_cells, s_cells); + parts[i].of_node = pp; + +- partname = of_get_property(pp, "label", &len); +- if (!partname) +- partname = of_get_property(pp, "name", &len); ++ if (mangled_rootblock && (i == mangled_rootblock)) { ++ partname = owrtpart; ++ } else { ++ partname = of_get_property(pp, "label", &len); ++ if (!partname) ++ partname = of_get_property(pp, "name", &len); ++ } + parts[i].name = partname; + + if (of_get_property(pp, "read-only", &len)) +@@ -219,6 +226,18 @@ static int __init ofpart_parser_init(voi + return 0; + } + ++static int __init active_root(char *str) ++{ ++ get_option(&str, &mangled_rootblock); ++ ++ if (!mangled_rootblock) ++ return 1; ++ ++ return 1; ++} ++ ++__setup("mangled_rootblock=", active_root); ++ + static void __exit ofpart_parser_exit(void) + { + deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/mvebu/patches-5.4/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-5.4/102-revert_i2c_delay.patch new file mode 100644 index 0000000000..930c0f9494 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/102-revert_i2c_delay.patch @@ -0,0 +1,15 @@ +--- a/arch/arm/boot/dts/armada-xp.dtsi ++++ b/arch/arm/boot/dts/armada-xp.dtsi +@@ -237,12 +237,10 @@ + }; + + &i2c0 { +- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; + }; + + &i2c1 { +- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; + }; + diff --git a/target/linux/mvebu/patches-5.4/205-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-5.4/205-armada-385-rd-mtd-partitions.patch new file mode 100644 index 0000000000..31bd53b1f3 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/205-armada-385-rd-mtd-partitions.patch @@ -0,0 +1,19 @@ +--- a/arch/arm/boot/dts/armada-388-rd.dts ++++ b/arch/arm/boot/dts/armada-388-rd.dts +@@ -103,6 +103,16 @@ + compatible = "st,m25p128", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <108000000>; ++ ++ partition@0 { ++ label = "uboot"; ++ reg = <0 0x400000>; ++ }; ++ ++ partition@1 { ++ label = "firmware"; ++ reg = <0x400000 0xc00000>; ++ }; + }; + }; + diff --git a/target/linux/mvebu/patches-5.4/206-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-5.4/206-ARM-mvebu-385-ap-Add-partitions.patch new file mode 100644 index 0000000000..2057e31c7e --- /dev/null +++ b/target/linux/mvebu/patches-5.4/206-ARM-mvebu-385-ap-Add-partitions.patch @@ -0,0 +1,35 @@ +From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001 +From: Maxime Ripard <maxime.ripard@free-electrons.com> +Date: Tue, 13 Jan 2015 11:14:09 +0100 +Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions + +Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> +--- + arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/arch/arm/boot/dts/armada-385-db-ap.dts ++++ b/arch/arm/boot/dts/armada-385-db-ap.dts +@@ -218,19 +218,19 @@ + #size-cells = <1>; + + partition@0 { +- label = "U-Boot"; ++ label = "u-boot"; + reg = <0x00000000 0x00800000>; + read-only; + }; + + partition@800000 { +- label = "uImage"; ++ label = "kernel"; + reg = <0x00800000 0x00400000>; + read-only; + }; + + partition@c00000 { +- label = "Root"; ++ label = "ubi"; + reg = <0x00c00000 0x3f400000>; + }; + }; diff --git a/target/linux/mvebu/patches-5.4/210-clearfog_switch_node.patch b/target/linux/mvebu/patches-5.4/210-clearfog_switch_node.patch new file mode 100644 index 0000000000..f9677a82f2 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/210-clearfog_switch_node.patch @@ -0,0 +1,21 @@ +--- a/arch/arm/boot/dts/armada-388-clearfog.dts ++++ b/arch/arm/boot/dts/armada-388-clearfog.dts +@@ -88,6 +88,18 @@ + }; + }; + ++ mvsw61xx { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "marvell,88e6176"; ++ status = "okay"; ++ reg = <0x4>; ++ is-indirect; ++ ++ mii-bus = <&mdio>; ++ cpu-port-0 = <5>; ++ }; ++ + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&rear_button_pins>; diff --git a/target/linux/mvebu/patches-5.4/220-disable-untested-dsa-boards.patch b/target/linux/mvebu/patches-5.4/220-disable-untested-dsa-boards.patch new file mode 100644 index 0000000000..9cc7a113f6 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/220-disable-untested-dsa-boards.patch @@ -0,0 +1,30 @@ +--- a/arch/arm/boot/dts/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +@@ -171,6 +171,7 @@ + status = "okay"; + + switch@0 { ++ status = "disabled"; + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; +--- a/arch/arm/boot/dts/armada-388-clearfog.dts ++++ b/arch/arm/boot/dts/armada-388-clearfog.dts +@@ -161,6 +161,7 @@ + status = "okay"; + + switch@4 { ++ status = "disabled"; + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -413,6 +413,7 @@ + status = "okay"; + + switch@0 { ++ status = "disabled"; + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; diff --git a/target/linux/mvebu/patches-5.4/230-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-5.4/230-armada-xp-linksys-mamba-broken-idle.patch new file mode 100644 index 0000000000..935c8fe093 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/230-armada-xp-linksys-mamba-broken-idle.patch @@ -0,0 +1,10 @@ +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -543,3 +543,7 @@ + }; + }; + }; ++ ++&coherencyfab { ++ broken-idle; ++}; diff --git a/target/linux/mvebu/patches-5.4/240-linksys-status-led.patch b/target/linux/mvebu/patches-5.4/240-linksys-status-led.patch new file mode 100644 index 0000000000..e5e83572c9 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/240-linksys-status-led.patch @@ -0,0 +1,50 @@ +--- a/arch/arm/boot/dts/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +@@ -14,6 +14,13 @@ + compatible = "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + ++ aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_power; ++ }; ++ + chosen { + stdout-path = "serial0:115200n8"; + }; +@@ -71,7 +78,7 @@ + pinctrl-0 = <&gpio_leds_pins>; + pinctrl-names = "default"; + +- power { ++ led_power: power { + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -26,6 +26,13 @@ + compatible = "linksys,mamba", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + ++ aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_power; ++ }; ++ + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; +@@ -197,7 +204,7 @@ + pinctrl-0 = <&power_led_pin>; + pinctrl-names = "default"; + +- power { ++ led_power: power { + label = "mamba:white:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; diff --git a/target/linux/mvebu/patches-5.4/300-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-5.4/300-mvneta-tx-queue-workaround.patch new file mode 100644 index 0000000000..4a5ea36144 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/300-mvneta-tx-queue-workaround.patch @@ -0,0 +1,35 @@ +The hardware queue scheduling is apparently configured with fixed +priorities, which creates a nasty fairness issue where traffic from one +CPU can starve traffic from all other CPUs. + +Work around this issue by forcing all tx packets to go through one CPU, +until this issue is fixed properly. + +Signed-off-by: Felix Fietkau <nbd@nbd.name> +--- +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -4272,6 +4272,15 @@ static int mvneta_ethtool_set_eee(struct + return phylink_ethtool_set_eee(pp->phylink, eee); + } + ++static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb, ++ struct net_device *sb_dev, ++ select_queue_fallback_t fallback) ++{ ++ /* XXX: hardware queue scheduling is broken, ++ * use only one queue until it is fixed */ ++ return 0; ++} ++ + static const struct net_device_ops mvneta_netdev_ops = { + .ndo_open = mvneta_open, + .ndo_stop = mvneta_stop, +@@ -4282,6 +4291,7 @@ static const struct net_device_ops mvnet + .ndo_fix_features = mvneta_fix_features, + .ndo_get_stats64 = mvneta_get_stats64, + .ndo_do_ioctl = mvneta_ioctl, ++ .ndo_select_queue = mvneta_select_queue, + }; + + static const struct ethtool_ops mvneta_eth_tool_ops = { diff --git a/target/linux/mvebu/patches-5.4/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-5.4/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch new file mode 100644 index 0000000000..29f36be460 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch @@ -0,0 +1,40 @@ +From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@arm.linux.org.uk> +Date: Sat, 3 Oct 2015 09:13:05 +0100 +Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states + +The cpuidle ->enter method expects the return value to be the sleep +state we entered. Returning negative numbers or other codes is not +permissible since coupled CPU idle was merged. + +At least some of the mvebu_v7_cpu_suspend() implementations return the +value from cpu_suspend(), which returns zero if the CPU vectors back +into the kernel via cpu_resume() (the success case), or the non-zero +return value of the suspend actor, or one (failure cases). + +We do not want to be returning the failure case value back to CPU idle +as that indicates that we successfully entered one of the deeper idle +states. Always return zero instead, indicating that we slept for the +shortest amount of time. + +Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> +--- + drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/cpuidle/cpuidle-mvebu-v7.c ++++ b/drivers/cpuidle/cpuidle-mvebu-v7.c +@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp + ret = mvebu_v7_cpu_suspend(deepidle); + cpu_pm_exit(); + ++ /* ++ * If we failed to enter the desired state, indicate that we ++ * slept lightly. ++ */ + if (ret) +- return ret; ++ return 0; + + return index; + } diff --git a/target/linux/mvebu/patches-5.4/401-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-5.4/401-pci-mvebu-time-out-reset-on-link-up.patch new file mode 100644 index 0000000000..2bbb647153 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/401-pci-mvebu-time-out-reset-on-link-up.patch @@ -0,0 +1,60 @@ +From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@armlinux.org.uk> +Date: Sat, 9 Jul 2016 10:58:16 +0100 +Subject: pci: mvebu: time out reset on link up + +If the port reports that the link is up while we are resetting, there's +little point in waiting for the full duration. + +Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> +--- + drivers/pci/controller/pci-mvebu.c | 20 ++++++++++++++------ + 1 file changed, 14 insertions(+), 6 deletions(-) + +--- a/drivers/pci/controller/pci-mvebu.c ++++ b/drivers/pci/controller/pci-mvebu.c +@@ -1112,6 +1112,7 @@ static int mvebu_pcie_powerup(struct mve + + if (port->reset_gpio) { + u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000; ++ unsigned int i; + + of_property_read_u32(port->dn, "reset-delay-us", + &reset_udelay); +@@ -1119,7 +1120,13 @@ static int mvebu_pcie_powerup(struct mve + udelay(100); + + gpiod_set_value_cansleep(port->reset_gpio, 0); +- msleep(reset_udelay / 1000); ++ for (i = 0; i < reset_udelay; i += 1000) { ++ if (mvebu_pcie_link_up(port)) ++ break; ++ msleep(1); ++ } ++ ++ printk("%s: reset completed in %dus\n", port->name, i); + } + + return 0; +@@ -1283,15 +1290,16 @@ static int mvebu_pcie_probe(struct platf + if (!child) + continue; + +- ret = mvebu_pcie_powerup(port); +- if (ret < 0) +- continue; +- + port->base = mvebu_pcie_map_registers(pdev, child, port); + if (IS_ERR(port->base)) { + dev_err(dev, "%s: cannot map registers\n", port->name); + port->base = NULL; +- mvebu_pcie_powerdown(port); ++ continue; ++ } ++ ++ ret = mvebu_pcie_powerup(port); ++ if (ret < 0) { ++ port->base = NULL; + continue; + } + diff --git a/target/linux/mvebu/patches-5.4/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-5.4/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch new file mode 100644 index 0000000000..dd2bef7f63 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch @@ -0,0 +1,87 @@ +From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@armlinux.org.uk> +Date: Tue, 29 Nov 2016 10:15:45 +0000 +Subject: ARM: dts: armada388-clearfog: emmc on clearfog base + +Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> +--- + arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 + + .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++ + 2 files changed, 63 insertions(+) + create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi + +--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts ++++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts +@@ -7,6 +7,7 @@ + + /dts-v1/; + #include "armada-388-clearfog.dtsi" ++#include "armada-38x-solidrun-microsom-emmc.dtsi" + + / { + model = "SolidRun Clearfog Base A1"; +--- /dev/null ++++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi +@@ -0,0 +1,62 @@ ++/* ++ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC ++ * ++ * Copyright (C) 2015 Russell King ++ * ++ * This board is in development; the contents of this file work with ++ * the A1 rev 2.0 of the board, which does not represent final ++ * production board. Things will change, don't expect this file to ++ * remain compatible info the future. ++ * ++ * This file is dual-licensed: you can use it either under the terms ++ * of the GPL or the X11 license, at your option. Note that this dual ++ * licensing only applies to this file, and not this project as a ++ * whole. ++ * ++ * a) This file is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * version 2 as published by the Free Software Foundation. ++ * ++ * This file is distributed in the hope that it will be useful ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Or, alternatively ++ * ++ * b) Permission is hereby granted, free of charge, to any person ++ * obtaining a copy of this software and associated documentation ++ * files (the "Software"), to deal in the Software without ++ * restriction, including without limitation the rights to use ++ * copy, modify, merge, publish, distribute, sublicense, and/or ++ * sell copies of the Software, and to permit persons to whom the ++ * Software is furnished to do so, subject to the following ++ * conditions: ++ * ++ * The above copyright notice and this permission notice shall be ++ * included in all copies or substantial portions of the Software. ++ * ++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES ++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND ++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT ++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY ++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING ++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR ++ * OTHER DEALINGS IN THE SOFTWARE. ++ */ ++/ { ++ soc { ++ internal-regs { ++ sdhci@d8000 { ++ bus-width = <4>; ++ no-1-8-v; ++ non-removable; ++ pinctrl-0 = <µsom_sdhci_pins>; ++ pinctrl-names = "default"; ++ status = "okay"; ++ wp-inverted; ++ }; ++ }; ++ }; ++}; diff --git a/target/linux/mvebu/patches-5.4/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch b/target/linux/mvebu/patches-5.4/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch new file mode 100644 index 0000000000..d64bd8084e --- /dev/null +++ b/target/linux/mvebu/patches-5.4/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch @@ -0,0 +1,124 @@ +From 09a0122c74ec076e08512f1b00b7ccb8a450282f Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@arm.linux.org.uk> +Date: Tue, 29 Nov 2016 10:15:43 +0000 +Subject: ARM: dts: armada388-clearfog: document MPP usage + +Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> +--- + arch/arm/boot/dts/armada-388-clearfog-base.dts | 51 ++++++++++++++++++++++++++ + arch/arm/boot/dts/armada-388-clearfog.dts | 50 +++++++++++++++++++++++++ + 2 files changed, 101 insertions(+) + +--- a/arch/arm/boot/dts/armada-388-clearfog-base.dts ++++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts +@@ -67,3 +67,54 @@ + marvell,function = "gpio"; + }; + }; ++ ++/* ++MPP ++18: pu gpio pca9655 int ++19: gpio phy reset ++20: pu gpio sd0 detect ++21: sd0:cmd ++22: pd gpio mikro int ++23: ++ ++24: ua1:rxd mikro rx ++25: ua1:txd mikro tx ++26: pu i2c1:sck ++27: pu i2c1:sda ++28: sd0:clk ++29: pd gpio mikro rst ++30: ++31: ++ ++32: ++33: ++34: ++35: ++36: ++37: sd0:d3 ++38: sd0:d0 ++39: sd0:d1 ++ ++40: sd0:d2 ++41: ++42: ++43: spi1:cs2 mikro cs ++44: gpio rear button sw3 ++45: ref:clk_out0 phy#0 clock ++46: ref:clk_out1 phy#1 clock ++47: ++ ++48: gpio J18 spare gpio ++49: gpio U10 I2C_IRQ(GNSS) ++50: gpio board id? ++51: ++52: ++53: ++54: gpio mikro pwm ++55: ++ ++56: pu spi1:mosi mikro mosi ++57: pd spi1:sck mikro sck ++58: spi1:miso mikro miso ++59: ++*/ +--- a/arch/arm/boot/dts/armada-388-clearfog.dts ++++ b/arch/arm/boot/dts/armada-388-clearfog.dts +@@ -249,3 +249,53 @@ + */ + pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>; + }; ++/* +++#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011 ++MPP18: gpio ? (pca9655 int?) ++MPP19: gpio ? (clkreq?) ++MPP20: gpio ? (sd0 detect) ++MPP21: sd0:cmd x sd0 ++MPP22: gpio x mikro int ++MPP23: gpio x switch irq +++#define A38x_CUSTOMER_BOARD_1_MPP24_31 0x22043333 ++MPP24: ua1:rxd x mikro rx ++MPP25: ua1:txd x mikro tx ++MPP26: i2c1:sck x mikro sck ++MPP27: i2c1:sda x mikro sda ++MPP28: sd0:clk x sd0 ++MPP29: gpio x mikro rst ++MPP30: ge1:txd2 ? (config) ++MPP31: ge1:txd3 ? (config) +++#define A38x_CUSTOMER_BOARD_1_MPP32_39 0x44400002 ++MPP32: ge1:txctl ? (unused) ++MPP33: gpio ? (pic_com0) ++MPP34: gpio x rear button (pic_com1) ++MPP35: gpio ? (pic_com2) ++MPP36: gpio ? (unused) ++MPP37: sd0:d3 x sd0 ++MPP38: sd0:d0 x sd0 ++MPP39: sd0:d1 x sd0 +++#define A38x_CUSTOMER_BOARD_1_MPP40_47 0x41144004 ++MPP40: sd0:d2 x sd0 ++MPP41: gpio x switch reset ++MPP42: gpio ? sw1-1 ++MPP43: spi1:cs2 x mikro cs ++MPP44: sata3:prsnt ? (unused) ++MPP45: ref:clk_out0 ? ++MPP46: ref:clk_out1 x switch clk ++MPP47: 4 ? (unused) +++#define A38x_CUSTOMER_BOARD_1_MPP48_55 0x40333333 ++MPP48: tdm:pclk ++MPP49: tdm:fsync ++MPP50: tdm:drx ++MPP51: tdm:dtx ++MPP52: tdm:int ++MPP53: tdm:rst ++MPP54: gpio ? (pwm) ++MPP55: spi1:cs1 x slic +++#define A38x_CUSTOMER_BOARD_1_MPP56_63 0x00004444 ++MPP56: spi1:mosi x mikro mosi ++MPP57: spi1:sck x mikro sck ++MPP58: spi1:miso x mikro miso ++MPP59: spi1:cs0 x w25q32 ++*/ diff --git a/target/linux/mvebu/patches-5.4/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch b/target/linux/mvebu/patches-5.4/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch new file mode 100644 index 0000000000..880b0d9241 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch @@ -0,0 +1,40 @@ +From eefe328439642101774f0f5c4ea0dc6ba1cfb687 Mon Sep 17 00:00:00 2001 +From: Ding Tao <miyatsu@qq.com> +Date: Fri, 26 Oct 2018 11:50:27 +0000 +Subject: [PATCH] arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl + definition + +Add emmc/sdio pinctrl definition for marvell armada37xx SoCs. + +Signed-off-by: Ding Tao <miyatsu@qq.com> +Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> +--- + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 10 ++++++++++ + 1 file changed, 10 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +@@ -221,6 +221,11 @@ + groups = "uart2"; + function = "uart"; + }; ++ ++ mmc_pins: mmc-pins { ++ groups = "emmc_nb"; ++ function = "emmc"; ++ }; + }; + + nb_pm: syscon@14000 { +@@ -253,6 +258,11 @@ + function = "mii"; + }; + ++ sdio_pins: sdio-pins { ++ groups = "sdio_sb"; ++ function = "sdio"; ++ }; ++ + }; + + eth0: ethernet@30000 { diff --git a/target/linux/mvebu/patches-5.4/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch b/target/linux/mvebu/patches-5.4/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch new file mode 100644 index 0000000000..77af3d1219 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch @@ -0,0 +1,49 @@ +From 43ebc7c1b3ed8198b9acf3019eca16e722f7331c Mon Sep 17 00:00:00 2001 +From: Ding Tao <miyatsu@qq.com> +Date: Fri, 26 Oct 2018 11:50:28 +0000 +Subject: [PATCH] arm64: dts: marvell: armada-37xx: Enable emmc on espressobin + +The ESPRESSObin board has a emmc interface available on U11: declare it +and let the bootloader enable it if the emmc is present. + +[gregory.clement@bootlin.com: disable the emmc by default] +Signed-off-by: Ding Tao <miyatsu@qq.com> +Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> +--- + .../dts/marvell/armada-3720-espressobin.dts | 22 +++++++++++++++++++ + 1 file changed, 22 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +@@ -60,9 +60,31 @@ + cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>; + marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&sdio_pins>; + status = "okay"; + }; + ++/* U11 */ ++&sdhci0 { ++ non-removable; ++ bus-width = <8>; ++ mmc-ddr-1_8v; ++ mmc-hs400-1_8v; ++ marvell,xenon-emmc; ++ marvell,xenon-tun-count = <9>; ++ marvell,pad-type = "fixed-1-8v"; ++ ++ pinctrl-names = "default"; ++ pinctrl-0 = <&mmc_pins>; ++/* ++ * This eMMC is not populated on all boards, so disable it by ++ * default and let the bootloader enable it, if it is present ++ */ ++ status = "disabled"; ++}; ++ + &spi0 { + status = "okay"; + diff --git a/target/linux/mvebu/patches-5.4/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch b/target/linux/mvebu/patches-5.4/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch new file mode 100644 index 0000000000..e989f59d5c --- /dev/null +++ b/target/linux/mvebu/patches-5.4/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch @@ -0,0 +1,20 @@ +From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001 +From: Kevin Mihelich <kevin@archlinuxarm.org> +Date: Tue, 4 Jul 2017 19:25:28 -0600 +Subject: arm64: dts: marvell: armada37xx: Add eth0 alias + +Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org> +--- + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 + + 1 file changed, 1 insertion(+) + +--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +@@ -18,6 +18,7 @@ + #size-cells = <2>; + + aliases { ++ ethernet0 = ð0; + serial0 = &uart0; + serial1 = &uart1; + }; diff --git a/target/linux/mvebu/patches-5.4/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch b/target/linux/mvebu/patches-5.4/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch new file mode 100644 index 0000000000..0f39b2a3c2 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch @@ -0,0 +1,58 @@ +From 3217cdfe8a3eae76fafbebbe407be5985a7fd4c2 Mon Sep 17 00:00:00 2001 +From: Tomasz Maciej Nowak <tmn505@gmail.com> +Date: Mon, 31 Dec 2018 14:18:50 +0100 +Subject: [PATCH] arm64: dts: armada-3720-espressobin: correct spi node + +The manufacturer of this board, ships it with various SPI NOR chips and +increments U-Boot bootloader version along the time. There is no way to +tell which is placed on the board since no revision bump takes place. +This creates two issues. + +The first, cosmetic. Since the SPI chip may differ, there's message on +boot stating that kernel expected w25q32dw and found different one. To +correct this, remove optional device-specific compatible string. Being +here lets replace bogus "spi-flash" string with proper one. + +The second is linked to partitions layout, it changed after commit [1] +in Marvells downstream U-Boot fork, shifting environment location to the +end of boot device. Since the new boards can have U-Boot with this +change it can lead to improper results writing or reading from these +partitions. We can't tell if users will update bootloader to recent +version, so let's drop current layout. + +1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/81e7251252aefe1a6b829ed05f3586320cb45372 + +Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> +--- + .../dts/marvell/armada-3720-espressobin.dts | 18 +----------------- + 1 file changed, 1 insertion(+), 17 deletions(-) + +--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +@@ -90,25 +90,9 @@ + + flash@0 { + reg = <0>; +- compatible = "winbond,w25q32dw", "jedec,spi-flash"; ++ compatible = "jedec,spi-nor"; + spi-max-frequency = <104000000>; + m25p,fast-read; +- +- partitions { +- compatible = "fixed-partitions"; +- #address-cells = <1>; +- #size-cells = <1>; +- +- partition@0 { +- label = "uboot"; +- reg = <0 0x180000>; +- }; +- +- partition@180000 { +- label = "ubootenv"; +- reg = <0x180000 0x10000>; +- }; +- }; + }; + }; + diff --git a/target/linux/mvebu/patches-5.4/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-5.4/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch new file mode 100644 index 0000000000..cea0d1db44 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch @@ -0,0 +1,26 @@ +From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001 +From: Tomasz Maciej Nowak <tmn505@gmail.com> +Date: Tue, 9 Apr 2019 15:53:42 +0200 +Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports + phandle + +Instead of referencing the whole mdio node, add ports phandle to adjust +port labels in dts for different hardware iterations of ESPRESSObin +boards. + +Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> +--- + arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +@@ -132,7 +132,7 @@ + + dsa,member = <0 0>; + +- ports { ++ ports: ports { + #address-cells = <1>; + #size-cells = <0>; + diff --git a/target/linux/mvebu/patches-5.4/523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch b/target/linux/mvebu/patches-5.4/523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch new file mode 100644 index 0000000000..3fd561db3a --- /dev/null +++ b/target/linux/mvebu/patches-5.4/523-Revert-PCI-aardvark-Convert-to-use-pci_host_probe.patch @@ -0,0 +1,44 @@ +From 5e79c0c381eb085a2aa2da175eedea1950f07520 Mon Sep 17 00:00:00 2001 +From: Tomasz Maciej Nowak <tomek_n@o2.pl> +Date: Tue, 30 Apr 2019 15:37:34 +0200 +Subject: [PATCH] Revert "PCI: aardvark: Convert to use pci_host_probe()" + +This reverts commit c8e144f8ab00e6c4a070a932ef9c57db09aa41cf. +--- + drivers/pci/controller/pci-aardvark.c | 12 +++++++++++- + 1 file changed, 11 insertions(+), 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -843,6 +843,7 @@ static int advk_pcie_probe(struct platfo + struct device *dev = &pdev->dev; + struct advk_pcie *pcie; + struct resource *res; ++ struct pci_bus *bus, *child; + struct pci_host_bridge *bridge; + int ret, irq; + +@@ -896,13 +897,22 @@ static int advk_pcie_probe(struct platfo + bridge->map_irq = of_irq_parse_and_map_pci; + bridge->swizzle_irq = pci_common_swizzle; + +- ret = pci_host_probe(bridge); ++ ret = pci_scan_root_bus_bridge(bridge); + if (ret < 0) { + advk_pcie_remove_msi_irq_domain(pcie); + advk_pcie_remove_irq_domain(pcie); + return ret; + } + ++ bus = bridge->bus; ++ ++ pci_bus_size_bridges(bus); ++ pci_bus_assign_resources(bus); ++ ++ list_for_each_entry(child, &bus->children, node) ++ pcie_bus_configure_settings(child); ++ ++ pci_bus_add_devices(bus); + return 0; + } + diff --git a/target/linux/mvebu/patches-5.4/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch b/target/linux/mvebu/patches-5.4/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch new file mode 100644 index 0000000000..204d6e2aec --- /dev/null +++ b/target/linux/mvebu/patches-5.4/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch @@ -0,0 +1,138 @@ +From patchwork Thu Sep 28 12:58:34 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v2, + 3/7] PCI: aardvark: set host and device to the same MAX payload size +X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +X-Patchwork-Id: 819587 +Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com> +To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org +Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, + Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement + <gregory.clement@free-electrons.com>, + Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>, + Yehuda Yitschak <yehuday@marvell.com>, + linux-arm-kernel@lists.infradead.org, Antoine Tenart + <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?= + <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>, + Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +Date: Thu, 28 Sep 2017 14:58:34 +0200 +From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +List-Id: <linux-pci.vger.kernel.org> + +From: Victor Gu <xigu@marvell.com> + +Since the Aardvark does not implement a PCIe root bus, the Linux PCIe +subsystem will not align the MAX payload size between the host and the +device. This patch ensures that the host and device have the same MAX +payload size, fixing a number of problems with various PCIe devices. + +This is part of fixing bug +https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was +reported as the user to be important to get a Intel 7260 mini-PCIe +WiFi card working. + +Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") +Signed-off-by: Victor Gu <xigu@marvell.com> +Reviewed-by: Evan Wang <xswang@marvell.com> +Reviewed-by: Nadav Haklai <nadavh@marvell.com> +[Thomas: tweak commit log.] +Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +--- + drivers/pci/controller/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++- + 1 file changed, 59 insertions(+), 1 deletion(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -29,9 +29,11 @@ + #define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8 + #define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4) + #define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5 ++#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2 + #define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11) + #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12 + #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2 ++#define PCIE_CORE_MPS_UNIT_BYTE 128 + #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0 + #define PCIE_CORE_LINK_L0S_ENTRY BIT(0) + #define PCIE_CORE_LINK_TRAINING BIT(5) +@@ -253,7 +255,8 @@ static void advk_pcie_setup_hw(struct ad + + /* Set PCIe Device Control and Status 1 PF0 register */ + reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE | +- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) | ++ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ << ++ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) | + PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE | + (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ << + PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT); +@@ -838,6 +841,58 @@ out_release_res: + return err; + } + ++static int advk_pcie_find_smpss(struct pci_dev *dev, void *data) ++{ ++ u8 *smpss = data; ++ ++ if (!dev) ++ return 0; ++ ++ if (!pci_is_pcie(dev)) ++ return 0; ++ ++ if (*smpss > dev->pcie_mpss) ++ *smpss = dev->pcie_mpss; ++ ++ return 0; ++} ++ ++static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data) ++{ ++ int mps; ++ ++ if (!dev) ++ return 0; ++ ++ if (!pci_is_pcie(dev)) ++ return 0; ++ ++ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data; ++ pcie_set_mps(dev, mps); ++ ++ return 0; ++} ++ ++static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie) ++{ ++ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ; ++ u32 reg; ++ ++ /* Find the minimal supported MAX payload size */ ++ advk_pcie_find_smpss(bus->self, &smpss); ++ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss); ++ ++ /* Configure RC MAX payload size */ ++ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG); ++ reg &= ~PCI_EXP_DEVCTL_PAYLOAD; ++ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT; ++ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG); ++ ++ /* Configure device MAX payload size */ ++ advk_pcie_bus_configure_mps(bus->self, &smpss); ++ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss); ++} ++ + static int advk_pcie_probe(struct platform_device *pdev) + { + struct device *dev = &pdev->dev; +@@ -912,6 +967,9 @@ static int advk_pcie_probe(struct platfo + list_for_each_entry(child, &bus->children, node) + pcie_bus_configure_settings(child); + ++ /* Configure the MAX pay load size */ ++ advk_pcie_configure_mps(bus, pcie); ++ + pci_bus_add_devices(bus); + return 0; + } diff --git a/target/linux/mvebu/patches-5.4/526-PCI-aardvark-disable-LOS-state-by-default.patch b/target/linux/mvebu/patches-5.4/526-PCI-aardvark-disable-LOS-state-by-default.patch new file mode 100644 index 0000000000..b6fcec81f8 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/526-PCI-aardvark-disable-LOS-state-by-default.patch @@ -0,0 +1,55 @@ +From patchwork Thu Sep 28 12:58:36 2017 +Content-Type: text/plain; charset="utf-8" +MIME-Version: 1.0 +Content-Transfer-Encoding: 7bit +Subject: [v2,5/7] PCI: aardvark: disable LOS state by default +X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +X-Patchwork-Id: 819590 +Message-Id: <20170928125838.11887-6-thomas.petazzoni@free-electrons.com> +To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org +Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, + Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement + <gregory.clement@free-electrons.com>, + Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>, + Yehuda Yitschak <yehuday@marvell.com>, + linux-arm-kernel@lists.infradead.org, Antoine Tenart + <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?= + <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>, + Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +Date: Thu, 28 Sep 2017 14:58:36 +0200 +From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +List-Id: <linux-pci.vger.kernel.org> + +From: Victor Gu <xigu@marvell.com> + +Some PCIe devices do not support LOS, and will cause timeouts if the +root complex forces the LOS state. This patch disables the LOS state +by default. + +This is part of fixing bug +https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was +reported as the user to be important to get a Intel 7260 mini-PCIe +WiFi card working. + +Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver") +Signed-off-by: Victor Gu <xigu@marvell.com> +Reviewed-by: Evan Wang <xswang@marvell.com> +Reviewed-by: Nadav Haklai <nadavh@marvell.com> +[Thomas: tweak commit log.] +Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +--- + drivers/pci/controller/pci-aardvark.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -324,8 +324,7 @@ static void advk_pcie_setup_hw(struct ad + + advk_pcie_wait_for_link(pcie); + +- reg = PCIE_CORE_LINK_L0S_ENTRY | +- (1 << PCIE_CORE_LINK_WIDTH_SHIFT); ++ reg = (1 << PCIE_CORE_LINK_WIDTH_SHIFT); + advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG); + + reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG); diff --git a/target/linux/mvebu/patches-5.4/527-PCI-aardvark-allow-to-specify-link-capability.patch b/target/linux/mvebu/patches-5.4/527-PCI-aardvark-allow-to-specify-link-capability.patch new file mode 100644 index 0000000000..0ac3476147 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/527-PCI-aardvark-allow-to-specify-link-capability.patch @@ -0,0 +1,43 @@ +From f70b629e488cc3f2a325ac35476f4f7ae502c5d0 Mon Sep 17 00:00:00 2001 +From: Tomasz Maciej Nowak <tmn505@gmail.com> +Date: Thu, 14 Jun 2018 14:24:40 +0200 +Subject: [PATCH 1/2] PCI: aardvark: allow to specify link capability + +Use DT of_pci_get_max_link_speed() facility to allow specifying link +capability. If none or unspecified value is given it falls back to gen2, +which is default for Armada 3700 SoC. + +Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> +--- + drivers/pci/controller/pci-aardvark.c | 11 +++++++++-- + 1 file changed, 9 insertions(+), 2 deletions(-) + +--- a/drivers/pci/controller/pci-aardvark.c ++++ b/drivers/pci/controller/pci-aardvark.c +@@ -233,6 +233,8 @@ static int advk_pcie_wait_for_link(struc + + static void advk_pcie_setup_hw(struct advk_pcie *pcie) + { ++ struct device *dev = &pcie->pdev->dev; ++ struct device_node *node = dev->of_node; + u32 reg; + + /* Set to Direct mode */ +@@ -267,10 +269,15 @@ static void advk_pcie_setup_hw(struct ad + PCIE_CORE_CTRL2_TD_ENABLE; + advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG); + +- /* Set GEN2 */ ++ /* Set GEN */ + reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG); + reg &= ~PCIE_GEN_SEL_MSK; +- reg |= SPEED_GEN_2; ++ if (of_pci_get_max_link_speed(node) == 1) ++ reg |= SPEED_GEN_1; ++ else if (of_pci_get_max_link_speed(node) == 3) ++ reg |= SPEED_GEN_3; ++ else ++ reg |= SPEED_GEN_2; + advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG); + + /* Set lane X1 */ diff --git a/target/linux/mvebu/patches-5.4/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch b/target/linux/mvebu/patches-5.4/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch new file mode 100644 index 0000000000..88080d64ca --- /dev/null +++ b/target/linux/mvebu/patches-5.4/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch @@ -0,0 +1,73 @@ +From 33f8fdcedb01680427328d710594facef7a0092c Mon Sep 17 00:00:00 2001 +From: Tomasz Maciej Nowak <tmn505@gmail.com> +Date: Thu, 14 Jun 2018 14:40:26 +0200 +Subject: [PATCH 2/2] arm64: dts: armada-3720-espressobin: set max link to gen1 + +Since the beginning there's been an issue with initializing the Atheros +based MiniPCIe wireless cards. Here's an example of kerenel log: + + OF: PCI: host bridge /soc/pcie@d0070000 ranges: + OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000 + OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000 + advk-pcie d0070000.pcie: link up + advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00 + pci_bus 0000:00: root bus resource [bus 00-ff] + pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff] + pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff]) + pci 0000:00:00.0: BAR 0: assigned [mem0xe8000000-0xe801ffff 64bit] + pci 0000:00:00.0: BAR 6: assigned [mem0xe8020000-0xe802ffff pref] + [...] + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x44 + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4 + ath9k 0000:00:00.0: enabling device (0000 -> 0002) + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0xc + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4 + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x40 + ath9k 0000:00:00.0: request_irq failed + advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4 + ath9k: probe of 0000:00:00.0 failed with error -22 + +The same happens for ath5k cards, while ath10k card didn't appear at +all (not detected): + + OF: PCI: host bridge /soc/pcie@d0070000 ranges: + OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000 + OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000 + advk-pcie d0070000.pcie: link never came up + advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00 + pci_bus 0000:00: root bus resource [bus 00-ff] + pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff] + pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff]) + advk-pcie d0070000.pcie: config read/write timed out + +Following the issue on esppressobin.net forum [1] the workaround seems +to be limiting the speed of PCIe bridge to 1st generation. This fixed +the initialisation of all tested Atheros wireless cards. +The patch in the forum thread swaped registers which would limit speed +for all Armada 3700 based boards. The approach in this patch, in +conjunction with "PCI: aardvark: allow to specify link capability" patch +is less invasive, it only touches the affected board. + +For the record, the iwlwifi and mt76 cards were not affected by this +issue. + +1. http://espressobin.net/forums/topic/which-pcie-wlan-cards-are-supported + +Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com> +--- + arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts +@@ -46,6 +46,8 @@ + /* J9 */ + &pcie0 { + status = "okay"; ++ ++ max-link-speed = <1>; + }; + + /* J6 */ diff --git a/target/linux/mvebu/patches-5.4/531-net-mvneta-Add-support-for-2500Mbps-SGMII.patch b/target/linux/mvebu/patches-5.4/531-net-mvneta-Add-support-for-2500Mbps-SGMII.patch new file mode 100644 index 0000000000..a5553a3e96 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/531-net-mvneta-Add-support-for-2500Mbps-SGMII.patch @@ -0,0 +1,104 @@ +From da58a931f248f423f917c3a0b3c94303aa30a738 Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier <maxime.chevallier@bootlin.com> +Date: Tue, 25 Sep 2018 15:59:39 +0200 +Subject: [PATCH] net: mvneta: Add support for 2500Mbps SGMII + +The mvneta controller can handle speeds up to 2500Mbps on the SGMII +interface. This relies on serdes configuration, the lane must be +configured at 3.125Gbps and we can't use in-band autoneg at that speed. + +The main issue when supporting that speed on this particular controller +is that the link partner can send ethernet frames with a shortened +preamble, which if not explicitly enabled in the controller will cause +unexpected behaviours. + +This was tested on Armada 385, with the comphy configuration done in +bootloader. + +Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 27 +++++++++++++++++++++++---- + 1 file changed, 23 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -221,6 +221,8 @@ + #define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11) + #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12) + #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13) ++#define MVNETA_GMAC_CTRL_4 0x2c90 ++#define MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE BIT(1) + #define MVNETA_MIB_COUNTERS_BASE 0x3000 + #define MVNETA_MIB_LATE_COLLISION 0x7c + #define MVNETA_DA_FILT_SPEC_MCAST 0x3400 +@@ -3359,6 +3361,7 @@ static void mvneta_validate(struct net_d + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_QSGMII && + state->interface != PHY_INTERFACE_MODE_SGMII && ++ state->interface != PHY_INTERFACE_MODE_2500BASEX && + !phy_interface_mode_is_8023z(state->interface) && + !phy_interface_mode_is_rgmii(state->interface)) { + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); +@@ -3371,9 +3374,15 @@ static void mvneta_validate(struct net_d + + /* Asymmetric pause is unsupported */ + phylink_set(mask, Pause); +- /* Half-duplex at speeds higher than 100Mbit is unsupported */ +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseX_Full); ++ ++ /* We cannot use 1Gbps when using the 2.5G interface. */ ++ if (state->interface == PHY_INTERFACE_MODE_2500BASEX) { ++ phylink_set(mask, 2500baseT_Full); ++ phylink_set(mask, 2500baseX_Full); ++ } else { ++ phylink_set(mask, 1000baseT_Full); ++ phylink_set(mask, 1000baseX_Full); ++ } + + if (!phy_interface_mode_is_8023z(state->interface)) { + /* 10M and 100M are only supported in non-802.3z mode */ +@@ -3434,12 +3443,14 @@ static void mvneta_mac_config(struct net + struct mvneta_port *pp = netdev_priv(ndev); + u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0); + u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2); ++ u32 new_ctrl4, gmac_ctrl4 = mvreg_read(pp, MVNETA_GMAC_CTRL_4); + u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER); + u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG); + + new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X; + new_ctrl2 = gmac_ctrl2 & ~(MVNETA_GMAC2_INBAND_AN_ENABLE | + MVNETA_GMAC2_PORT_RESET); ++ new_ctrl4 = gmac_ctrl4 & ~(MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE); + new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE; + new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE | + MVNETA_GMAC_INBAND_RESTART_AN | +@@ -3472,7 +3483,7 @@ static void mvneta_mac_config(struct net + if (state->duplex) + new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX; + +- if (state->speed == SPEED_1000) ++ if (state->speed == SPEED_1000 || state->speed == SPEED_2500) + new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED; + else if (state->speed == SPEED_100) + new_an |= MVNETA_GMAC_CONFIG_MII_SPEED; +@@ -3511,10 +3522,18 @@ static void mvneta_mac_config(struct net + MVNETA_GMAC_FORCE_LINK_DOWN); + } + ++ /* When at 2.5G, the link partner can send frames with shortened ++ * preambles. ++ */ ++ if (state->speed == SPEED_2500) ++ new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE; ++ + if (new_ctrl0 != gmac_ctrl0) + mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0); + if (new_ctrl2 != gmac_ctrl2) + mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2); ++ if (new_ctrl4 != gmac_ctrl4) ++ mvreg_write(pp, MVNETA_GMAC_CTRL_4, new_ctrl4); + if (new_clk != gmac_clk) + mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk); + if (new_an != gmac_an) diff --git a/target/linux/mvebu/patches-5.4/532-net-mvneta-correct-typo.patch b/target/linux/mvebu/patches-5.4/532-net-mvneta-correct-typo.patch new file mode 100644 index 0000000000..b6e16c54a4 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/532-net-mvneta-correct-typo.patch @@ -0,0 +1,33 @@ +From fbd1d5245372e48b494120a30fe0b34b304576c4 Mon Sep 17 00:00:00 2001 +From: Alexandre Belloni <alexandre.belloni@bootlin.com> +Date: Fri, 9 Nov 2018 17:37:20 +0100 +Subject: [PATCH] net: mvneta: correct typo + +The reserved variable should be named reserved1. + +Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 4 ++-- + 1 file changed, 2 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -495,7 +495,7 @@ struct mvneta_port { + #if defined(__LITTLE_ENDIAN) + struct mvneta_tx_desc { + u32 command; /* Options used by HW for packet transmitting.*/ +- u16 reserverd1; /* csum_l4 (for future use) */ ++ u16 reserved1; /* csum_l4 (for future use) */ + u16 data_size; /* Data size of transmitted packet in bytes */ + u32 buf_phys_addr; /* Physical addr of transmitted buffer */ + u32 reserved2; /* hw_cmd - (for future use, PMT) */ +@@ -520,7 +520,7 @@ struct mvneta_rx_desc { + #else + struct mvneta_tx_desc { + u16 data_size; /* Data size of transmitted packet in bytes */ +- u16 reserverd1; /* csum_l4 (for future use) */ ++ u16 reserved1; /* csum_l4 (for future use) */ + u32 command; /* Options used by HW for packet transmitting.*/ + u32 reserved2; /* hw_cmd - (for future use, PMT) */ + u32 buf_phys_addr; /* Physical addr of transmitted buffer */ diff --git a/target/linux/mvebu/patches-5.4/533-net-mvneta-Dont-advertise-2.5G-modes.patch b/target/linux/mvebu/patches-5.4/533-net-mvneta-Dont-advertise-2.5G-modes.patch new file mode 100644 index 0000000000..01b101283c --- /dev/null +++ b/target/linux/mvebu/patches-5.4/533-net-mvneta-Dont-advertise-2.5G-modes.patch @@ -0,0 +1,55 @@ +From 83e65df6dfece9eb588735459428f221eb930c0c Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier <maxime.chevallier@bootlin.com> +Date: Fri, 9 Nov 2018 09:17:33 +0100 +Subject: [PATCH] net: mvneta: Don't advertise 2.5G modes + +Using 2.5G speed relies on the SerDes lanes being configured +accordingly. The lanes have to be reconfigured to switch between +1G and 2.5G, and for now only the bootloader does this configuration. + +In the case we add a Comphy driver to handle switching the lanes +dynamically, it's better for now to stick with supporting only 1G and +add advertisement for 2.5G once we really are capable of handling both +speeds without problem. + +Since the interface mode is initialy taken from the DT, we want to make +sure that adding comphy support won't break boards that don't update +their dtb. + +Fixes: da58a931f248 ("net: mvneta: Add support for 2500Mbps SGMII") +Reported-by: Andrew Lunn <andrew@lunn.ch> +Reported-by: Russell King <linux@armlinux.org.uk> +Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 12 +++--------- + 1 file changed, 3 insertions(+), 9 deletions(-) + +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -3361,7 +3361,6 @@ static void mvneta_validate(struct net_d + if (state->interface != PHY_INTERFACE_MODE_NA && + state->interface != PHY_INTERFACE_MODE_QSGMII && + state->interface != PHY_INTERFACE_MODE_SGMII && +- state->interface != PHY_INTERFACE_MODE_2500BASEX && + !phy_interface_mode_is_8023z(state->interface) && + !phy_interface_mode_is_rgmii(state->interface)) { + bitmap_zero(supported, __ETHTOOL_LINK_MODE_MASK_NBITS); +@@ -3375,14 +3374,9 @@ static void mvneta_validate(struct net_d + /* Asymmetric pause is unsupported */ + phylink_set(mask, Pause); + +- /* We cannot use 1Gbps when using the 2.5G interface. */ +- if (state->interface == PHY_INTERFACE_MODE_2500BASEX) { +- phylink_set(mask, 2500baseT_Full); +- phylink_set(mask, 2500baseX_Full); +- } else { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseX_Full); +- } ++ /* Half-duplex at speeds higher than 100Mbit is unsupported */ ++ phylink_set(mask, 1000baseT_Full); ++ phylink_set(mask, 1000baseX_Full); + + if (!phy_interface_mode_is_8023z(state->interface)) { + /* 10M and 100M are only supported in non-802.3z mode */ diff --git a/target/linux/mvebu/patches-5.4/534-net-mvneta-remove-redundant-check-for.patch b/target/linux/mvebu/patches-5.4/534-net-mvneta-remove-redundant-check-for.patch new file mode 100644 index 0000000000..fd774e0839 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/534-net-mvneta-remove-redundant-check-for.patch @@ -0,0 +1,30 @@ +From e4a3e9ff5ba9f6b67595ec2768ed4be2054c2aa5 Mon Sep 17 00:00:00 2001 +From: YueHaibing <yuehaibing@huawei.com> +Date: Thu, 22 Nov 2018 14:42:00 +0800 +Subject: [PATCH] net: mvneta: remove redundant check for + eee->tx_lpi_timer < 0 + +fixes the smatch warning: + +drivers/net/ethernet/marvell/mvneta.c:4252 mvneta_ethtool_set_eee() warn: + unsigned 'eee->tx_lpi_timer' is never less than zero. + +Signed-off-by: YueHaibing <yuehaibing@huawei.com> +Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 3 +-- + 1 file changed, 1 insertion(+), 2 deletions(-) + +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -4268,8 +4268,7 @@ static int mvneta_ethtool_set_eee(struct + + /* The Armada 37x documents do not give limits for this other than + * it being an 8-bit register. */ +- if (eee->tx_lpi_enabled && +- (eee->tx_lpi_timer < 0 || eee->tx_lpi_timer > 255)) ++ if (eee->tx_lpi_enabled && eee->tx_lpi_timer > 255) + return -EINVAL; + + lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0); diff --git a/target/linux/mvebu/patches-5.4/535-net-marvell-neta-add-comphy-support.patch b/target/linux/mvebu/patches-5.4/535-net-marvell-neta-add-comphy-support.patch new file mode 100644 index 0000000000..272beb6950 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/535-net-marvell-neta-add-comphy-support.patch @@ -0,0 +1,159 @@ +From a10c1c8191e04c21769656c2ca8e1c69a6218954 Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@armlinux.org.uk> +Date: Thu, 7 Feb 2019 16:19:26 +0000 +Subject: [PATCH] net: marvell: neta: add comphy support + +Add support for the common phy binding, so that we can reconfigure the +comphy according to the desired ethernet speed. This will allow us to +support 1000base-X and 2500base-X SFPs dynamically on SolidRun Clearfog. + +Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 45 +++++++++++++++++++++++++++++++---- + 1 file changed, 41 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -27,6 +27,7 @@ + #include <linux/of_irq.h> + #include <linux/of_mdio.h> + #include <linux/of_net.h> ++#include <linux/phy/phy.h> + #include <linux/phy.h> + #include <linux/phylink.h> + #include <linux/platform_device.h> +@@ -438,6 +439,7 @@ struct mvneta_port { + struct device_node *dn; + unsigned int tx_csum_limit; + struct phylink *phylink; ++ struct phy *comphy; + + struct mvneta_bm *bm_priv; + struct mvneta_bm_pool *pool_long; +@@ -3168,6 +3170,8 @@ static void mvneta_start_dev(struct mvne + { + int cpu; + ++ WARN_ON(phy_power_on(pp->comphy)); ++ + mvneta_max_rx_size_set(pp, pp->pkt_size); + mvneta_txq_max_tx_size_set(pp, pp->pkt_size); + +@@ -3230,6 +3234,8 @@ static void mvneta_stop_dev(struct mvnet + + mvneta_tx_reset(pp); + mvneta_rx_reset(pp); ++ ++ WARN_ON(phy_power_off(pp->comphy)); + } + + static void mvneta_percpu_enable(void *arg) +@@ -3355,6 +3361,7 @@ static int mvneta_set_mac_addr(struct ne + static void mvneta_validate(struct net_device *ndev, unsigned long *supported, + struct phylink_link_state *state) + { ++ struct mvneta_port *pp = netdev_priv(ndev); + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + + /* We only support QSGMII, SGMII, 802.3z and RGMII modes */ +@@ -3375,8 +3382,13 @@ static void mvneta_validate(struct net_d + phylink_set(mask, Pause); + + /* Half-duplex at speeds higher than 100Mbit is unsupported */ +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseX_Full); ++ if (pp->comphy || state->interface != PHY_INTERFACE_MODE_2500BASEX) { ++ phylink_set(mask, 1000baseT_Full); ++ phylink_set(mask, 1000baseX_Full); ++ } ++ if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) { ++ phylink_set(mask, 2500baseX_Full); ++ } + + if (!phy_interface_mode_is_8023z(state->interface)) { + /* 10M and 100M are only supported in non-802.3z mode */ +@@ -3390,6 +3402,11 @@ static void mvneta_validate(struct net_d + __ETHTOOL_LINK_MODE_MASK_NBITS); + bitmap_and(state->advertising, state->advertising, mask, + __ETHTOOL_LINK_MODE_MASK_NBITS); ++ ++ /* We can only operate at 2500BaseX or 1000BaseX. If requested ++ * to advertise both, only report advertising at 2500BaseX. ++ */ ++ phylink_helper_basex_speed(state); + } + + static int mvneta_mac_link_state(struct net_device *ndev, +@@ -3401,7 +3418,9 @@ static int mvneta_mac_link_state(struct + gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS); + + if (gmac_stat & MVNETA_GMAC_SPEED_1000) +- state->speed = SPEED_1000; ++ state->speed = ++ state->interface == PHY_INTERFACE_MODE_2500BASEX ? ++ SPEED_2500 : SPEED_1000; + else if (gmac_stat & MVNETA_GMAC_SPEED_100) + state->speed = SPEED_100; + else +@@ -3516,12 +3535,20 @@ static void mvneta_mac_config(struct net + MVNETA_GMAC_FORCE_LINK_DOWN); + } + ++ + /* When at 2.5G, the link partner can send frames with shortened + * preambles. + */ + if (state->speed == SPEED_2500) + new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE; + ++ if (pp->comphy && ++ (state->interface == PHY_INTERFACE_MODE_SGMII || ++ state->interface == PHY_INTERFACE_MODE_1000BASEX || ++ state->interface == PHY_INTERFACE_MODE_2500BASEX)) ++ WARN_ON(phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET, ++ state->interface)); ++ + if (new_ctrl0 != gmac_ctrl0) + mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0); + if (new_ctrl2 != gmac_ctrl2) +@@ -4434,7 +4461,7 @@ static int mvneta_port_power_up(struct m + if (phy_mode == PHY_INTERFACE_MODE_QSGMII) + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_QSGMII_SERDES_PROTO); + else if (phy_mode == PHY_INTERFACE_MODE_SGMII || +- phy_mode == PHY_INTERFACE_MODE_1000BASEX) ++ phy_interface_mode_is_8023z(phy_mode)) + mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO); + else if (!phy_interface_mode_is_rgmii(phy_mode)) + return -EINVAL; +@@ -4451,6 +4478,7 @@ static int mvneta_probe(struct platform_ + struct mvneta_port *pp; + struct net_device *dev; + struct phylink *phylink; ++ struct phy *comphy; + const char *dt_mac_addr; + char hw_mac_addr[ETH_ALEN]; + const char *mac_from; +@@ -4476,6 +4504,14 @@ static int mvneta_probe(struct platform_ + goto err_free_irq; + } + ++ comphy = devm_of_phy_get(&pdev->dev, dn, NULL); ++ if (comphy == ERR_PTR(-EPROBE_DEFER)) { ++ err = -EPROBE_DEFER; ++ goto err_free_irq; ++ } else if (IS_ERR(comphy)) { ++ comphy = NULL; ++ } ++ + phylink = phylink_create(dev, pdev->dev.fwnode, phy_mode, + &mvneta_phylink_ops); + if (IS_ERR(phylink)) { +@@ -4492,6 +4528,7 @@ static int mvneta_probe(struct platform_ + pp = netdev_priv(dev); + spin_lock_init(&pp->lock); + pp->phylink = phylink; ++ pp->comphy = comphy; + pp->phy_interface = phy_mode; + pp->dn = dn; + diff --git a/target/linux/mvebu/patches-5.4/536-net-marvell-neta-disable-comphy-when-setting-mode.patch b/target/linux/mvebu/patches-5.4/536-net-marvell-neta-disable-comphy-when-setting-mode.patch new file mode 100644 index 0000000000..bac9a55cf0 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/536-net-marvell-neta-disable-comphy-when-setting-mode.patch @@ -0,0 +1,78 @@ +From 031b922bfd60c771588911112f8632783de08e5c Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= <marek.behun@nic.cz> +Date: Mon, 25 Feb 2019 17:43:03 +0100 +Subject: [PATCH] net: marvell: neta: disable comphy when setting mode +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The comphy driver for Armada 3700 by Miquèl Raynal (which is currently +in linux-next) does not actually set comphy mode when phy_set_mode_ext +is called. The mode is set at next call of phy_power_on. + +Update the driver to semantics similar to mvpp2: helper +mvneta_comphy_init sets comphy mode and powers it on. +When mode is to be changed in mvneta_mac_config, first power the comphy +off, then call mvneta_comphy_init (which sets the mode to new one). + +Only do this when new mode is different from old mode. + +This should also work for Armada 38x, since in that comphy driver +methods power_on and power_off are unimplemented. + +Signed-off-by: Marek Behún <marek.behun@nic.cz> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 28 +++++++++++++++++++++++----- + 1 file changed, 23 insertions(+), 5 deletions(-) + +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -3166,11 +3166,26 @@ static int mvneta_setup_txqs(struct mvne + return 0; + } + ++static int mvneta_comphy_init(struct mvneta_port *pp) ++{ ++ int ret; ++ ++ if (!pp->comphy) ++ return 0; ++ ++ ret = phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET, ++ pp->phy_interface); ++ if (ret) ++ return ret; ++ ++ return phy_power_on(pp->comphy); ++} ++ + static void mvneta_start_dev(struct mvneta_port *pp) + { + int cpu; + +- WARN_ON(phy_power_on(pp->comphy)); ++ WARN_ON(mvneta_comphy_init(pp)); + + mvneta_max_rx_size_set(pp, pp->pkt_size); + mvneta_txq_max_tx_size_set(pp, pp->pkt_size); +@@ -3542,12 +3557,15 @@ static void mvneta_mac_config(struct net + if (state->speed == SPEED_2500) + new_ctrl4 |= MVNETA_GMAC4_SHORT_PREAMBLE_ENABLE; + +- if (pp->comphy && ++ if (pp->comphy && pp->phy_interface != state->interface && + (state->interface == PHY_INTERFACE_MODE_SGMII || + state->interface == PHY_INTERFACE_MODE_1000BASEX || +- state->interface == PHY_INTERFACE_MODE_2500BASEX)) +- WARN_ON(phy_set_mode_ext(pp->comphy, PHY_MODE_ETHERNET, +- state->interface)); ++ state->interface == PHY_INTERFACE_MODE_2500BASEX)) { ++ pp->phy_interface = state->interface; ++ ++ WARN_ON(phy_power_off(pp->comphy)); ++ WARN_ON(mvneta_comphy_init(pp)); ++ } + + if (new_ctrl0 != gmac_ctrl0) + mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0); diff --git a/target/linux/mvebu/patches-5.4/537-net-mvneta-add-2500baset-support.patch b/target/linux/mvebu/patches-5.4/537-net-mvneta-add-2500baset-support.patch new file mode 100644 index 0000000000..9186ceb0da --- /dev/null +++ b/target/linux/mvebu/patches-5.4/537-net-mvneta-add-2500baset-support.patch @@ -0,0 +1,34 @@ +From eda3d1b0228484fb52b7244a68fd4cc8a985ed10 Mon Sep 17 00:00:00 2001 +From: Maxime Chevallier <maxime.chevallier@bootlin.com> +Date: Wed, 27 Mar 2019 17:31:06 +0100 +Subject: [PATCH] net: mvneta: Add 2500BaseT support + +Some PHYs will use the 2500BaseX PHY_INTERFACE_MODE when being linked +with a partner using 2.5GBaseT. + +Since we can't autonegotiate this speed between the MAC and the PHY, we +need to have the proper comphy support enabled, to make sure we can +safely advertise 2.5G and 1G in BaseT and be able to switch between both +corresponding PHY interface modes. This is now possible since comphy +support was added to this driver. + +This commit adds the 2500BaseT mode to the list of supported modes when +using 2500BaseX, and was tested on a setup with an Armada385 and a +88E2010 PHY, both with and without the comphy node in the DT. + +Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + drivers/net/ethernet/marvell/mvneta.c | 1 + + 1 file changed, 1 insertion(+) + +--- a/drivers/net/ethernet/marvell/mvneta.c ++++ b/drivers/net/ethernet/marvell/mvneta.c +@@ -3402,6 +3402,7 @@ static void mvneta_validate(struct net_d + phylink_set(mask, 1000baseX_Full); + } + if (pp->comphy || state->interface == PHY_INTERFACE_MODE_2500BASEX) { ++ phylink_set(mask, 2500baseT_Full); + phylink_set(mask, 2500baseX_Full); + } + diff --git a/target/linux/mvebu/patches-5.4/538-phy-add-QSGMII-and-PCIE-modes.patch b/target/linux/mvebu/patches-5.4/538-phy-add-QSGMII-and-PCIE-modes.patch new file mode 100644 index 0000000000..b759b9fb25 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/538-phy-add-QSGMII-and-PCIE-modes.patch @@ -0,0 +1,28 @@ +From c2a90025ad09d830c8d8ae69f485eac6aaaa2472 Mon Sep 17 00:00:00 2001 +From: Quentin Schulz <quentin.schulz@bootlin.com> +Date: Thu, 4 Oct 2018 14:22:03 +0200 +Subject: [PATCH] phy: add QSGMII and PCIE modes + +Prepare for upcoming phys that'll handle QSGMII or PCIe. + +Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> +Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com> +Signed-off-by: David S. Miller <davem@davemloft.net> +--- + include/linux/phy/phy.h | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/include/linux/phy/phy.h ++++ b/include/linux/phy/phy.h +@@ -37,9 +37,11 @@ enum phy_mode { + PHY_MODE_USB_OTG, + PHY_MODE_SGMII, + PHY_MODE_2500SGMII, ++ PHY_MODE_QSGMII, + PHY_MODE_10GKR, + PHY_MODE_UFS_HS_A, + PHY_MODE_UFS_HS_B, ++ PHY_MODE_PCIE, + }; + + /** diff --git a/target/linux/mvebu/patches-5.4/539-phy-core-add-PHY_MODE_ETHERNET.patch b/target/linux/mvebu/patches-5.4/539-phy-core-add-PHY_MODE_ETHERNET.patch new file mode 100644 index 0000000000..68fecadce8 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/539-phy-core-add-PHY_MODE_ETHERNET.patch @@ -0,0 +1,24 @@ +From 2af8caeee47846a84bc96abc3a72f7c991153040 Mon Sep 17 00:00:00 2001 +From: Grygorii Strashko <grygorii.strashko@ti.com> +Date: Mon, 19 Nov 2018 19:24:21 -0600 +Subject: [PATCH] phy: core: add PHY_MODE_ETHERNET + +Add new PHY's mode to be used by Ethernet PHY interface drivers or +multipurpose PHYs like serdes. It will be reused in further changes. + +Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + include/linux/phy/phy.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/linux/phy/phy.h ++++ b/include/linux/phy/phy.h +@@ -42,6 +42,7 @@ enum phy_mode { + PHY_MODE_UFS_HS_A, + PHY_MODE_UFS_HS_B, + PHY_MODE_PCIE, ++ PHY_MODE_ETHERNET, + }; + + /** diff --git a/target/linux/mvebu/patches-5.4/540-phy-fix-build-breakage-add-PHY_MODE_SATA.patch b/target/linux/mvebu/patches-5.4/540-phy-fix-build-breakage-add-PHY_MODE_SATA.patch new file mode 100644 index 0000000000..83908af19e --- /dev/null +++ b/target/linux/mvebu/patches-5.4/540-phy-fix-build-breakage-add-PHY_MODE_SATA.patch @@ -0,0 +1,45 @@ +From e1706720408e72fb883f6b151c2b3b23d8e7e5b2 Mon Sep 17 00:00:00 2001 +From: John Hubbard <jhubbard@nvidia.com> +Date: Sat, 12 Jan 2019 17:29:09 -0800 +Subject: [PATCH] phy: fix build breakage: add PHY_MODE_SATA + +Commit 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") uses +the PHY_MODE_SATA, but that enum had not yet been added. This caused a +build failure for me, with today's linux.git. + +Also, there is a potentially conflicting (mis-named) PHY_MODE_SATA, hiding +in the Marvell Berlin SATA PHY driver. + +Fix the build by: + + 1) Renaming Marvell's defined value to a more scoped name, + in order to avoid any potential conflicts: PHY_BERLIN_MODE_SATA. + + 2) Adding the missing enum, which was going to be added anyway as part + of [1]. + +[1] https://lkml.kernel.org/r/20190108163124.6409-3-miquel.raynal@bootlin.com + +Fixes: 49e54187ae0b ("ata: libahci_platform: comply to PHY framework") + +Signed-off-by: John Hubbard <jhubbard@nvidia.com> +Acked-by: Jens Axboe <axboe@kernel.dk> +Acked-by: Olof Johansson <olof@lixom.net> +Cc: Grzegorz Jaszczyk <jaz@semihalf.com> +Cc: Miquel Raynal <miquel.raynal@bootlin.com> +Cc: Hans de Goede <hdegoede@redhat.com> +Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> +--- + include/linux/phy/phy.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/linux/phy/phy.h ++++ b/include/linux/phy/phy.h +@@ -43,6 +43,7 @@ enum phy_mode { + PHY_MODE_UFS_HS_B, + PHY_MODE_PCIE, + PHY_MODE_ETHERNET, ++ PHY_MODE_SATA + }; + + /** diff --git a/target/linux/mvebu/patches-5.4/541-phy-core-rework-phy_set_mode-to-accept-phy-mode-and-.patch b/target/linux/mvebu/patches-5.4/541-phy-core-rework-phy_set_mode-to-accept-phy-mode-and-.patch new file mode 100644 index 0000000000..e02f203912 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/541-phy-core-rework-phy_set_mode-to-accept-phy-mode-and-.patch @@ -0,0 +1,134 @@ +From 79a5a18aa9d1062205cdcfa183d4cd5241d1b8da Mon Sep 17 00:00:00 2001 +From: Grygorii Strashko <grygorii.strashko@ti.com> +Date: Mon, 19 Nov 2018 19:24:20 -0600 +Subject: [PATCH] phy: core: rework phy_set_mode to accept phy mode and submode + +Currently the attempt to add support for Ethernet interface mode PHY +(MII/GMII/RGMII) will lead to the necessity of extending enum phy_mode and +duplicate there values from phy_interface_t enum (or introduce more PHY +callbacks) [1]. Both approaches are ineffective and would lead to fast +bloating of enum phy_mode or struct phy_ops in the process of adding more +PHYs for different subsystems which will make them unmaintainable. + +As discussed in [1] the solution could be to introduce dual level PHYs mode +configuration - PHY mode and PHY submode. The PHY mode will define generic +PHY type (subsystem - PCIE/ETHERNET/USB_) while the PHY submode - subsystem +specific interface mode. The last is usually already defined in +corresponding subsystem headers (phy_interface_t for Ethernet, enum +usb_device_speed for USB). + +This patch is cumulative change which refactors PHY framework code to +support dual level PHYs mode configuration - PHY mode and PHY submode. It +extends .set_mode() callback to support additional parameter "int submode" +and converts all corresponding PHY drivers to support new .set_mode() +callback declaration. +The new extended PHY API + int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) +is introduced to support dual level PHYs mode configuration and existing +phy_set_mode() API is converted to macros, so PHY framework consumers do +not need to be changed (~21 matches). + +[1] http://lkml.kernel.org/r/d63588f6-9ab0-848a-5ad4-8073143bd95d@ti.com +Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/allwinner/phy-sun4i-usb.c | 3 ++- + drivers/phy/amlogic/phy-meson-gxl-usb2.c | 5 +++-- + drivers/phy/amlogic/phy-meson-gxl-usb3.c | 5 +++-- + drivers/phy/marvell/phy-mvebu-cp110-comphy.c | 3 ++- + drivers/phy/mediatek/phy-mtk-tphy.c | 2 +- + drivers/phy/mediatek/phy-mtk-xsphy.c | 2 +- + drivers/phy/mscc/phy-ocelot-serdes.c | 2 +- + drivers/phy/phy-core.c | 6 +++--- + drivers/phy/qualcomm/phy-qcom-qmp.c | 3 ++- + drivers/phy/qualcomm/phy-qcom-qusb2.c | 3 ++- + drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c | 3 ++- + drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c | 3 ++- + drivers/phy/qualcomm/phy-qcom-usb-hs.c | 3 ++- + drivers/phy/ti/phy-da8xx-usb.c | 3 ++- + drivers/phy/ti/phy-tusb1210.c | 2 +- + include/linux/phy/phy.h | 13 ++++++++++--- + 16 files changed, 39 insertions(+), 22 deletions(-) + +--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c ++++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c +@@ -512,7 +512,8 @@ static int mvebu_comphy_power_on(struct + return ret; + } + +-static int mvebu_comphy_set_mode(struct phy *phy, enum phy_mode mode) ++static int mvebu_comphy_set_mode(struct phy *phy, ++ enum phy_mode mode, int submode) + { + struct mvebu_comphy_lane *lane = phy_get_drvdata(phy); + +--- a/drivers/phy/phy-core.c ++++ b/drivers/phy/phy-core.c +@@ -360,7 +360,7 @@ int phy_power_off(struct phy *phy) + } + EXPORT_SYMBOL_GPL(phy_power_off); + +-int phy_set_mode(struct phy *phy, enum phy_mode mode) ++int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode) + { + int ret; + +@@ -368,14 +368,14 @@ int phy_set_mode(struct phy *phy, enum p + return 0; + + mutex_lock(&phy->mutex); +- ret = phy->ops->set_mode(phy, mode); ++ ret = phy->ops->set_mode(phy, mode, submode); + if (!ret) + phy->attrs.mode = mode; + mutex_unlock(&phy->mutex); + + return ret; + } +-EXPORT_SYMBOL_GPL(phy_set_mode); ++EXPORT_SYMBOL_GPL(phy_set_mode_ext); + + int phy_reset(struct phy *phy) + { +--- a/include/linux/phy/phy.h ++++ b/include/linux/phy/phy.h +@@ -62,7 +62,7 @@ struct phy_ops { + int (*exit)(struct phy *phy); + int (*power_on)(struct phy *phy); + int (*power_off)(struct phy *phy); +- int (*set_mode)(struct phy *phy, enum phy_mode mode); ++ int (*set_mode)(struct phy *phy, enum phy_mode mode, int submode); + int (*reset)(struct phy *phy); + int (*calibrate)(struct phy *phy); + struct module *owner; +@@ -166,7 +166,10 @@ int phy_init(struct phy *phy); + int phy_exit(struct phy *phy); + int phy_power_on(struct phy *phy); + int phy_power_off(struct phy *phy); +-int phy_set_mode(struct phy *phy, enum phy_mode mode); ++int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, int submode); ++#define phy_set_mode(phy, mode) \ ++ phy_set_mode_ext(phy, mode, 0) ++ + static inline enum phy_mode phy_get_mode(struct phy *phy) + { + return phy->attrs.mode; +@@ -280,13 +283,17 @@ static inline int phy_power_off(struct p + return -ENOSYS; + } + +-static inline int phy_set_mode(struct phy *phy, enum phy_mode mode) ++static inline int phy_set_mode_ext(struct phy *phy, enum phy_mode mode, ++ int submode) + { + if (!phy) + return 0; + return -ENOSYS; + } + ++#define phy_set_mode(phy, mode) \ ++ phy_set_mode_ext(phy, mode, 0) ++ + static inline enum phy_mode phy_get_mode(struct phy *phy) + { + return PHY_MODE_INVALID; diff --git a/target/linux/mvebu/patches-5.4/542-phy-add-A3700-COMPHY-support.patch b/target/linux/mvebu/patches-5.4/542-phy-add-A3700-COMPHY-support.patch new file mode 100644 index 0000000000..0964da03a8 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/542-phy-add-A3700-COMPHY-support.patch @@ -0,0 +1,381 @@ +From 9695375a3f4a604406f2e61f2b735eca1de931ed Mon Sep 17 00:00:00 2001 +From: Miquel Raynal <miquel.raynal@bootlin.com> +Date: Tue, 8 Jan 2019 17:31:20 +0100 +Subject: [PATCH] phy: add A3700 COMPHY support + +Add a driver to support COMPHY, a hardware block providing shared +serdes PHYs on Marvell Armada 3700. This driver uses SMC calls and +rely on having an up-to-date firmware. + +SATA, PCie and USB3 host mode have been tested successfully with an +ESPRESSObin. (HS)SGMII mode cannot be tested with this platform. + +Evan worked on the original driver structure and Grzegorz on the SMC +calls rework. The structure of this driver has been copied from +Antoine Tenart work on CP110 COMPHY driver. + +Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> +Co-developed-by: Evan Wang <xswang@marvell.com> +Signed-off-by: Evan Wang <xswang@marvell.com> +Co-developed-by: Grzegorz Jaszczyk <jaz@semihalf.com> +Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com> +Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> +--- + drivers/phy/marvell/Kconfig | 12 + + drivers/phy/marvell/Makefile | 1 + + drivers/phy/marvell/phy-mvebu-a3700-comphy.c | 318 +++++++++++++++++++++++++++ + 3 files changed, 331 insertions(+) + create mode 100644 drivers/phy/marvell/phy-mvebu-a3700-comphy.c + +--- a/drivers/phy/marvell/Kconfig ++++ b/drivers/phy/marvell/Kconfig +@@ -21,6 +21,18 @@ config PHY_BERLIN_USB + help + Enable this to support the USB PHY on Marvell Berlin SoCs. + ++config PHY_MVEBU_A3700_COMPHY ++ tristate "Marvell A3700 comphy driver" ++ depends on ARCH_MVEBU || COMPILE_TEST ++ depends on OF ++ depends on HAVE_ARM_SMCCC ++ default y ++ select GENERIC_PHY ++ help ++ This driver allows to control the comphy, a hardware block providing ++ shared serdes PHYs on Marvell Armada 3700. Its serdes lanes can be ++ used by various controllers: Ethernet, SATA, USB3, PCIe. ++ + config PHY_MVEBU_CP110_COMPHY + tristate "Marvell CP110 comphy driver" + depends on ARCH_MVEBU || COMPILE_TEST +--- a/drivers/phy/marvell/Makefile ++++ b/drivers/phy/marvell/Makefile +@@ -2,6 +2,7 @@ + obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o + obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o + obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o ++obj-$(CONFIG_PHY_MVEBU_A3700_COMPHY) += phy-mvebu-a3700-comphy.o + obj-$(CONFIG_PHY_MVEBU_CP110_COMPHY) += phy-mvebu-cp110-comphy.o + obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o + obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o +--- /dev/null ++++ b/drivers/phy/marvell/phy-mvebu-a3700-comphy.c +@@ -0,0 +1,318 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Copyright (C) 2018 Marvell ++ * ++ * Authors: ++ * Evan Wang <xswang@marvell.com> ++ * Miquèl Raynal <miquel.raynal@bootlin.com> ++ * ++ * Structure inspired from phy-mvebu-cp110-comphy.c written by Antoine Tenart. ++ * SMC call initial support done by Grzegorz Jaszczyk. ++ */ ++ ++#include <linux/arm-smccc.h> ++#include <linux/io.h> ++#include <linux/iopoll.h> ++#include <linux/mfd/syscon.h> ++#include <linux/module.h> ++#include <linux/phy.h> ++#include <linux/phy/phy.h> ++#include <linux/platform_device.h> ++ ++#define MVEBU_A3700_COMPHY_LANES 3 ++#define MVEBU_A3700_COMPHY_PORTS 2 ++ ++/* COMPHY Fast SMC function identifiers */ ++#define COMPHY_SIP_POWER_ON 0x82000001 ++#define COMPHY_SIP_POWER_OFF 0x82000002 ++#define COMPHY_SIP_PLL_LOCK 0x82000003 ++ ++#define COMPHY_FW_MODE_SATA 0x1 ++#define COMPHY_FW_MODE_SGMII 0x2 ++#define COMPHY_FW_MODE_HS_SGMII 0x3 ++#define COMPHY_FW_MODE_USB3H 0x4 ++#define COMPHY_FW_MODE_USB3D 0x5 ++#define COMPHY_FW_MODE_PCIE 0x6 ++#define COMPHY_FW_MODE_RXAUI 0x7 ++#define COMPHY_FW_MODE_XFI 0x8 ++#define COMPHY_FW_MODE_SFI 0x9 ++#define COMPHY_FW_MODE_USB3 0xa ++ ++#define COMPHY_FW_SPEED_1_25G 0 /* SGMII 1G */ ++#define COMPHY_FW_SPEED_2_5G 1 ++#define COMPHY_FW_SPEED_3_125G 2 /* SGMII 2.5G */ ++#define COMPHY_FW_SPEED_5G 3 ++#define COMPHY_FW_SPEED_5_15625G 4 /* XFI 5G */ ++#define COMPHY_FW_SPEED_6G 5 ++#define COMPHY_FW_SPEED_10_3125G 6 /* XFI 10G */ ++#define COMPHY_FW_SPEED_MAX 0x3F ++ ++#define COMPHY_FW_MODE(mode) ((mode) << 12) ++#define COMPHY_FW_NET(mode, idx, speed) (COMPHY_FW_MODE(mode) | \ ++ ((idx) << 8) | \ ++ ((speed) << 2)) ++#define COMPHY_FW_PCIE(mode, idx, speed, width) (COMPHY_FW_NET(mode, idx, speed) | \ ++ ((width) << 18)) ++ ++struct mvebu_a3700_comphy_conf { ++ unsigned int lane; ++ enum phy_mode mode; ++ int submode; ++ unsigned int port; ++ u32 fw_mode; ++}; ++ ++#define MVEBU_A3700_COMPHY_CONF(_lane, _mode, _smode, _port, _fw) \ ++ { \ ++ .lane = _lane, \ ++ .mode = _mode, \ ++ .submode = _smode, \ ++ .port = _port, \ ++ .fw_mode = _fw, \ ++ } ++ ++#define MVEBU_A3700_COMPHY_CONF_GEN(_lane, _mode, _port, _fw) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, _mode, PHY_INTERFACE_MODE_NA, _port, _fw) ++ ++#define MVEBU_A3700_COMPHY_CONF_ETH(_lane, _smode, _port, _fw) \ ++ MVEBU_A3700_COMPHY_CONF(_lane, PHY_MODE_ETHERNET, _smode, _port, _fw) ++ ++static const struct mvebu_a3700_comphy_conf mvebu_a3700_comphy_modes[] = { ++ /* lane 0 */ ++ MVEBU_A3700_COMPHY_CONF_GEN(0, PHY_MODE_USB_HOST_SS, 0, ++ COMPHY_FW_MODE_USB3H), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_SGMII, 1, ++ COMPHY_FW_MODE_SGMII), ++ MVEBU_A3700_COMPHY_CONF_ETH(0, PHY_INTERFACE_MODE_2500BASEX, 1, ++ COMPHY_FW_MODE_HS_SGMII), ++ /* lane 1 */ ++ MVEBU_A3700_COMPHY_CONF_GEN(1, PHY_MODE_PCIE, 0, ++ COMPHY_FW_MODE_PCIE), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_SGMII, 0, ++ COMPHY_FW_MODE_SGMII), ++ MVEBU_A3700_COMPHY_CONF_ETH(1, PHY_INTERFACE_MODE_2500BASEX, 0, ++ COMPHY_FW_MODE_HS_SGMII), ++ /* lane 2 */ ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_SATA, 0, ++ COMPHY_FW_MODE_SATA), ++ MVEBU_A3700_COMPHY_CONF_GEN(2, PHY_MODE_USB_HOST_SS, 0, ++ COMPHY_FW_MODE_USB3H), ++}; ++ ++struct mvebu_a3700_comphy_lane { ++ struct device *dev; ++ unsigned int id; ++ enum phy_mode mode; ++ int submode; ++ int port; ++}; ++ ++static int mvebu_a3700_comphy_smc(unsigned long function, unsigned long lane, ++ unsigned long mode) ++{ ++ struct arm_smccc_res res; ++ ++ arm_smccc_smc(function, lane, mode, 0, 0, 0, 0, 0, &res); ++ ++ return res.a0; ++} ++ ++static int mvebu_a3700_comphy_get_fw_mode(int lane, int port, ++ enum phy_mode mode, ++ int submode) ++{ ++ int i, n = ARRAY_SIZE(mvebu_a3700_comphy_modes); ++ ++ /* Unused PHY mux value is 0x0 */ ++ if (mode == PHY_MODE_INVALID) ++ return -EINVAL; ++ ++ for (i = 0; i < n; i++) { ++ if (mvebu_a3700_comphy_modes[i].lane == lane && ++ mvebu_a3700_comphy_modes[i].port == port && ++ mvebu_a3700_comphy_modes[i].mode == mode && ++ mvebu_a3700_comphy_modes[i].submode == submode) ++ break; ++ } ++ ++ if (i == n) ++ return -EINVAL; ++ ++ return mvebu_a3700_comphy_modes[i].fw_mode; ++} ++ ++static int mvebu_a3700_comphy_set_mode(struct phy *phy, enum phy_mode mode, ++ int submode) ++{ ++ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); ++ int fw_mode; ++ ++ if (submode == PHY_INTERFACE_MODE_1000BASEX) ++ submode = PHY_INTERFACE_MODE_SGMII; ++ ++ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, mode, ++ submode); ++ if (fw_mode < 0) { ++ dev_err(lane->dev, "invalid COMPHY mode\n"); ++ return fw_mode; ++ } ++ ++ /* Just remember the mode, ->power_on() will do the real setup */ ++ lane->mode = mode; ++ lane->submode = submode; ++ ++ return 0; ++} ++ ++static int mvebu_a3700_comphy_power_on(struct phy *phy) ++{ ++ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); ++ u32 fw_param; ++ int fw_mode; ++ ++ fw_mode = mvebu_a3700_comphy_get_fw_mode(lane->id, lane->port, ++ lane->mode, lane->submode); ++ if (fw_mode < 0) { ++ dev_err(lane->dev, "invalid COMPHY mode\n"); ++ return fw_mode; ++ } ++ ++ switch (lane->mode) { ++ case PHY_MODE_USB_HOST_SS: ++ dev_dbg(lane->dev, "set lane %d to USB3 host mode\n", lane->id); ++ fw_param = COMPHY_FW_MODE(fw_mode); ++ break; ++ case PHY_MODE_SATA: ++ dev_dbg(lane->dev, "set lane %d to SATA mode\n", lane->id); ++ fw_param = COMPHY_FW_MODE(fw_mode); ++ break; ++ case PHY_MODE_ETHERNET: ++ switch (lane->submode) { ++ case PHY_INTERFACE_MODE_SGMII: ++ dev_dbg(lane->dev, "set lane %d to SGMII mode\n", ++ lane->id); ++ fw_param = COMPHY_FW_NET(fw_mode, lane->port, ++ COMPHY_FW_SPEED_1_25G); ++ break; ++ case PHY_INTERFACE_MODE_2500BASEX: ++ dev_dbg(lane->dev, "set lane %d to HS SGMII mode\n", ++ lane->id); ++ fw_param = COMPHY_FW_NET(fw_mode, lane->port, ++ COMPHY_FW_SPEED_3_125G); ++ break; ++ default: ++ dev_err(lane->dev, "unsupported PHY submode (%d)\n", ++ lane->submode); ++ return -ENOTSUPP; ++ } ++ break; ++ case PHY_MODE_PCIE: ++ dev_dbg(lane->dev, "set lane %d to PCIe mode\n", lane->id); ++ fw_param = COMPHY_FW_PCIE(fw_mode, lane->port, ++ COMPHY_FW_SPEED_5G, ++ phy->attrs.bus_width); ++ break; ++ default: ++ dev_err(lane->dev, "unsupported PHY mode (%d)\n", lane->mode); ++ return -ENOTSUPP; ++ } ++ ++ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_ON, lane->id, fw_param); ++} ++ ++static int mvebu_a3700_comphy_power_off(struct phy *phy) ++{ ++ struct mvebu_a3700_comphy_lane *lane = phy_get_drvdata(phy); ++ ++ return mvebu_a3700_comphy_smc(COMPHY_SIP_POWER_OFF, lane->id, 0); ++} ++ ++static const struct phy_ops mvebu_a3700_comphy_ops = { ++ .power_on = mvebu_a3700_comphy_power_on, ++ .power_off = mvebu_a3700_comphy_power_off, ++ .set_mode = mvebu_a3700_comphy_set_mode, ++ .owner = THIS_MODULE, ++}; ++ ++static struct phy *mvebu_a3700_comphy_xlate(struct device *dev, ++ struct of_phandle_args *args) ++{ ++ struct mvebu_a3700_comphy_lane *lane; ++ struct phy *phy; ++ ++ if (WARN_ON(args->args[0] >= MVEBU_A3700_COMPHY_PORTS)) ++ return ERR_PTR(-EINVAL); ++ ++ phy = of_phy_simple_xlate(dev, args); ++ if (IS_ERR(phy)) ++ return phy; ++ ++ lane = phy_get_drvdata(phy); ++ lane->port = args->args[0]; ++ ++ return phy; ++} ++ ++static int mvebu_a3700_comphy_probe(struct platform_device *pdev) ++{ ++ struct phy_provider *provider; ++ struct device_node *child; ++ ++ for_each_available_child_of_node(pdev->dev.of_node, child) { ++ struct mvebu_a3700_comphy_lane *lane; ++ struct phy *phy; ++ int ret; ++ u32 lane_id; ++ ++ ret = of_property_read_u32(child, "reg", &lane_id); ++ if (ret < 0) { ++ dev_err(&pdev->dev, "missing 'reg' property (%d)\n", ++ ret); ++ continue; ++ } ++ ++ if (lane_id >= MVEBU_A3700_COMPHY_LANES) { ++ dev_err(&pdev->dev, "invalid 'reg' property\n"); ++ continue; ++ } ++ ++ lane = devm_kzalloc(&pdev->dev, sizeof(*lane), GFP_KERNEL); ++ if (!lane) ++ return -ENOMEM; ++ ++ phy = devm_phy_create(&pdev->dev, child, ++ &mvebu_a3700_comphy_ops); ++ if (IS_ERR(phy)) ++ return PTR_ERR(phy); ++ ++ lane->dev = &pdev->dev; ++ lane->mode = PHY_MODE_INVALID; ++ lane->submode = PHY_INTERFACE_MODE_NA; ++ lane->id = lane_id; ++ lane->port = -1; ++ phy_set_drvdata(phy, lane); ++ } ++ ++ provider = devm_of_phy_provider_register(&pdev->dev, ++ mvebu_a3700_comphy_xlate); ++ return PTR_ERR_OR_ZERO(provider); ++} ++ ++static const struct of_device_id mvebu_a3700_comphy_of_match_table[] = { ++ { .compatible = "marvell,comphy-a3700" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, mvebu_a3700_comphy_of_match_table); ++ ++static struct platform_driver mvebu_a3700_comphy_driver = { ++ .probe = mvebu_a3700_comphy_probe, ++ .driver = { ++ .name = "mvebu-a3700-comphy", ++ .of_match_table = mvebu_a3700_comphy_of_match_table, ++ }, ++}; ++module_platform_driver(mvebu_a3700_comphy_driver); ++ ++MODULE_AUTHOR("Miquèl Raynal <miquel.raynal@bootlin.com>"); ++MODULE_DESCRIPTION("Common PHY driver for A3700"); ++MODULE_LICENSE("GPL v2"); diff --git a/target/linux/mvebu/patches-5.4/543-arm64-dts-marvell-armada-37xx-declare-the-COMPHY.patch b/target/linux/mvebu/patches-5.4/543-arm64-dts-marvell-armada-37xx-declare-the-COMPHY.patch new file mode 100644 index 0000000000..393f823794 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/543-arm64-dts-marvell-armada-37xx-declare-the-COMPHY.patch @@ -0,0 +1,58 @@ +From 2ef303f0fe44feee4a3ca8bd62fca86c105927d2 Mon Sep 17 00:00:00 2001 +From: Miquel Raynal <miquel.raynal@bootlin.com> +Date: Tue, 8 Jan 2019 17:31:24 +0100 +Subject: [PATCH] arm64: dts: marvell: armada-37xx: declare the COMPHY + node + +Describe the A3700 COMPHY node. It has three PHYs that can be +configured as follow: +* PCIe or GbE +* USB3 or GbE +* SATA or USB3 +Each of them has its own memory area. + +Suggested-by: Grzegorz Jaszczyk <jaz@semihalf.com> +Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> +Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> +--- + arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 29 ++++++++++++++++++++++++++++ + 1 file changed, 29 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi ++++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +@@ -235,6 +235,35 @@ + reg = <0x14000 0x60>; + }; + ++ comphy: phy@18300 { ++ compatible = "marvell,comphy-a3700"; ++ reg = <0x18300 0x300>, ++ <0x1F000 0x400>, ++ <0x5C000 0x400>, ++ <0xe0178 0x8>; ++ reg-names = "comphy", ++ "lane1_pcie_gbe", ++ "lane0_usb3_gbe", ++ "lane2_sata_usb3"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ comphy0: phy@0 { ++ reg = <0>; ++ #phy-cells = <1>; ++ }; ++ ++ comphy1: phy@1 { ++ reg = <1>; ++ #phy-cells = <1>; ++ }; ++ ++ comphy2: phy@2 { ++ reg = <2>; ++ #phy-cells = <1>; ++ }; ++ }; ++ + pinctrl_sb: pinctrl@18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; diff --git a/target/linux/mvebu/patches-5.4/544-arm64-dts-uDPU-fix-comphy-definitions.patch b/target/linux/mvebu/patches-5.4/544-arm64-dts-uDPU-fix-comphy-definitions.patch new file mode 100644 index 0000000000..f72ea93b97 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/544-arm64-dts-uDPU-fix-comphy-definitions.patch @@ -0,0 +1,35 @@ +From 9c222a1d78a1700220e38feb270f00d2ddd3c5ab Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@armlinux.org.uk> +Date: Wed, 6 Nov 2019 13:44:21 +0000 +Subject: [PATCH 657/660] arm64: dts: uDPU: fix comphy definitions + +The uDPU uses both ethernet controllers, which ties up COMPHY 0 for +eth1 and COMPHY 1 for eth0, with no USB3 comphy. The addition of +COMPHY support made the kernel override the setup by the boot loader +breaking this platform. Delete the USB3 COMPHY definition at platform +level, and add phy specifications for the ethernet channels. + +Fixes: bd3d25b07342 ("arm64: dts: marvell: armada-37xx: link USB hosts with their PHYs") +Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> +--- + arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +@@ -143,6 +143,7 @@ + status = "okay"; + phy-mode = "sgmii"; + managed = "in-band-status"; ++ phys = <&comphy1 0>; + sfp = <&sfp_eth0>; + }; + +@@ -150,6 +151,7 @@ + status = "okay"; + phy-mode = "sgmii"; + managed = "in-band-status"; ++ phys = <&comphy0 1>; + sfp = <&sfp_eth1>; + }; + diff --git a/target/linux/mvebu/patches-5.4/545-arm64-dts-uDPU-remove-i2c-fast-mode.patch b/target/linux/mvebu/patches-5.4/545-arm64-dts-uDPU-remove-i2c-fast-mode.patch new file mode 100644 index 0000000000..b984eb4ba1 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/545-arm64-dts-uDPU-remove-i2c-fast-mode.patch @@ -0,0 +1,30 @@ +From 662eb8fc87f982e63ccb9a9df25c7aeabf9fe341 Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@armlinux.org.uk> +Date: Thu, 14 Nov 2019 00:23:35 +0000 +Subject: [PATCH 658/660] arm64: dts: uDPU: remove i2c-fast-mode + +The I2C bus violates the timing specifications when run in fast mode +on the uDPU, so switch to 100kHz mode. + +Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> +--- + arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +@@ -119,12 +119,14 @@ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; ++ /delete-property/mrvl,i2c-fast-mode; + }; + + &i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; ++ /delete-property/mrvl,i2c-fast-mode; + + lm75@48 { + status = "okay"; diff --git a/target/linux/mvebu/patches-5.4/546-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch b/target/linux/mvebu/patches-5.4/546-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch new file mode 100644 index 0000000000..d025f36a53 --- /dev/null +++ b/target/linux/mvebu/patches-5.4/546-arm64-dts-uDPU-SFP-cages-support-3W-modules.patch @@ -0,0 +1,33 @@ +From 1cb114a20854e34324a2cb308f23054ff8227ffa Mon Sep 17 00:00:00 2001 +From: Russell King <rmk+kernel@armlinux.org.uk> +Date: Tue, 19 Nov 2019 22:48:50 +0000 +Subject: [PATCH 659/660] arm64: dts: uDPU: SFP cages support 3W modules + +The SFP cages are designed to support up to 3W modules, such as G.hn, +G.fast and MoCA modules. Although there is no way for such modules to +declare to software that they consume 3W, we document in DT that this +is the designed power level for these cages. + +Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> +--- + arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts ++++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts +@@ -69,6 +69,7 @@ + mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>; ++ maximum-power-milliwatt = <3000>; + }; + + sfp_eth1: sfp-eth1 { +@@ -78,6 +79,7 @@ + mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>; + tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>; + tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>; ++ maximum-power-milliwatt = <3000>; + }; + }; + |