diff options
Diffstat (limited to 'target/linux/mvebu')
| -rw-r--r-- | target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts | 53 |
1 files changed, 22 insertions, 31 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts index 6b8a964ab3..4d2760eb72 100644 --- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts +++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -42,7 +42,7 @@ gpio_fan { gpios = <&gpio0 13 GPIO_ACTIVE_HIGH - &gpio0 14 GPIO_ACTIVE_HIGH>; + &gpio0 14 GPIO_ACTIVE_HIGH>; alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; }; @@ -50,22 +50,9 @@ compatible = "gpio-keys"; #address-cells = <1>; #size-cells = <0>; - pinctrl-0 = <&pmx_hdd_present &pmx_buttons>; + pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - hdd1-present { - label = "HDD1 Present"; - linux,code = <KEY_PROG1>; - gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; - }; - - hdd2-present { - label = "HDD2 Present"; - linux,code = <KEY_PROG2>; - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - - }; - power { label = "Power Switch"; linux,code = <KEY_POWER>; @@ -75,7 +62,7 @@ function { label = "Function Button"; - linux,code = <KEY_OPTION>; + linux,code = <KEY_CONFIG>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; @@ -131,11 +118,11 @@ #address-cells = <1>; #size-cells = <0>; pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; - pinctrl-names = "default"; - usb_v5_regulator: usb-v5-regulator { + usb_power: regulator@0 { compatible = "regulator-fixed"; + reg = <0>; regulator-name = "USB"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; @@ -145,7 +132,7 @@ gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; }; - ata1_regulator: ata1-regulator { + sata1_power: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "HDD1"; @@ -158,7 +145,7 @@ gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; - ata2_regulator: ata2-regulator { + sata2_power: regulator@2 { compatible = "regulator-fixed"; reg = <2>; regulator-name = "HDD2"; @@ -183,11 +170,13 @@ pinctrl-0 = <&ge1_rgmii_pins>; pinctrl-names = "default"; status = "okay"; - phy = <&phy0>; - phy-mode = "rgmii-id"; + phy-handle = <ðphy0>; + phy-connection-type = "rgmii-id"; }; &i2c0 { + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; clock-frequency = <100000>; status = "okay"; @@ -201,16 +190,18 @@ pinctrl-0 = <&mdio_pins>; pinctrl-names = "default"; - phy0: ethernet-phy@0 { /* Marvell 88E1518 */ + ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */ reg = <0>; - /* LED2 is used to inform uBoot if the power-switch was slided - to the "off" position, and then power off the machine. - Page 0x3, Register 0x10, bit 8: - 0x800: LED2 off, power off the machine - 0x900: LED2 on, boot the machine */ - marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */ - <0x3 0x11 0x1 0x4401>, /* LED polarity */ - <0x3 0x12 0x1 0x4905>; /* LED Timer */ + /* + * LED2 is used to inform, at restart time, if the power + * switch was slided to the "off" position. + * Page 0x3, Register 0x10, bits 8-11: + * 0x800: LED2 off, power off the machine + * 0x900: LED2 on, boot the machine + */ + marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED function */ + <0x3 0x11 0x1 0x4401>, /* LED polarity */ + <0x3 0x12 0x1 0x4905>; /* LED timer */ }; }; |