aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu')
-rw-r--r--target/linux/mvebu/config-4.14498
-rw-r--r--target/linux/mvebu/cortexa53/config-4.14113
-rw-r--r--target/linux/mvebu/cortexa72/config-4.14121
-rw-r--r--target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts207
-rw-r--r--target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts28
-rw-r--r--target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts43
-rw-r--r--target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts31
-rw-r--r--target/linux/mvebu/patches-4.14/002-add_powertables.patch770
-rw-r--r--target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch40
-rw-r--r--target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch39
-rw-r--r--target/linux/mvebu/patches-4.14/005-linksys_hardcode_nand_ecc_settings.patch17
-rw-r--r--target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch201
-rw-r--r--target/linux/mvebu/patches-4.14/100-find_active_root.patch60
-rw-r--r--target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch15
-rw-r--r--target/linux/mvebu/patches-4.14/103-remove-nand-driver-bug.patch13
-rw-r--r--target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch10
-rw-r--r--target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch69
-rw-r--r--target/linux/mvebu/patches-4.14/205-armada-385-rd-mtd-partitions.patch19
-rw-r--r--target/linux/mvebu/patches-4.14/206-ARM-mvebu-385-ap-Add-partitions.patch35
-rw-r--r--target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch21
-rw-r--r--target/linux/mvebu/patches-4.14/220-disable-untested-dsa-boards.patch30
-rw-r--r--target/linux/mvebu/patches-4.14/230-armada-xp-linksys-mamba-broken-idle.patch10
-rw-r--r--target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch35
-rw-r--r--target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch40
-rw-r--r--target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch60
-rw-r--r--target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch290
-rw-r--r--target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch979
-rw-r--r--target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch28
-rw-r--r--target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch56
-rw-r--r--target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch44
-rw-r--r--target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch80
-rw-r--r--target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch181
-rw-r--r--target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch34
-rw-r--r--target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch132
-rw-r--r--target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch24
-rw-r--r--target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch87
-rw-r--r--target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch42
-rw-r--r--target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch81
-rw-r--r--target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch124
-rw-r--r--target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch143
-rw-r--r--target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch73
-rw-r--r--target/linux/mvebu/patches-4.14/423-ARM-dts-armada-385-linksys-Disable-internal-RTC.patch28
-rw-r--r--target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch94
-rw-r--r--target/linux/mvebu/patches-4.14/501-spi-a3700-Change-SPI-mode-before-asserting-chip-sele.patch70
-rw-r--r--target/linux/mvebu/patches-4.14/502-arm64-dts-marvell-armada-37xx-add-UART-clock.patch27
-rw-r--r--target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-periph-cosmetic-changes.patch78
-rw-r--r--target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch178
-rw-r--r--target/linux/mvebu/patches-4.14/505-clk-mvebu-armada-37xx-periph-add-DVFS-support-for-cp.patch315
-rw-r--r--target/linux/mvebu/patches-4.14/506-cpufreq-Add-DVFS-support-for-Armada-37xx.patch297
-rw-r--r--target/linux/mvebu/patches-4.14/507-arm64-dts-marvell-armada-37xx-add-nodes-allowing-cpu.patch48
-rw-r--r--target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch56
-rw-r--r--target/linux/mvebu/patches-4.14/509-cpufreq-armada-37xx-Fix-clock-leak.patch35
-rw-r--r--target/linux/mvebu/patches-4.14/510-clk-mvebu-armada-37xx-periph-Fix-switching-CPU-rate-.patch92
-rw-r--r--target/linux/mvebu/patches-4.14/511-clk-mvebu-armada-37xx-periph-Fix-wrong-return-value-.patch33
-rw-r--r--target/linux/mvebu/patches-4.14/512-clk-mvebu-armada-37xx-periph-Remove-unused-var-num_p.patch33
-rw-r--r--target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch40
-rw-r--r--target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch49
-rw-r--r--target/linux/mvebu/patches-4.14/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch20
-rw-r--r--target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch58
-rw-r--r--target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch26
-rw-r--r--target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch138
-rw-r--r--target/linux/mvebu/patches-4.14/526-PCI-aardvark-disable-LOS-state-by-default.patch55
-rw-r--r--target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch43
-rw-r--r--target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch73
64 files changed, 0 insertions, 6809 deletions
diff --git a/target/linux/mvebu/config-4.14 b/target/linux/mvebu/config-4.14
deleted file mode 100644
index 7a0caeeb61..0000000000
--- a/target/linux/mvebu/config-4.14
+++ /dev/null
@@ -1,498 +0,0 @@
-CONFIG_AHCI_MVEBU=y
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_SET_MEMORY=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y
-CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MULTIPLATFORM=y
-# CONFIG_ARCH_MULTI_CPU_AUTO is not set
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MVEBU=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-CONFIG_ARMADA_370_CLK=y
-CONFIG_ARMADA_370_XP_IRQ=y
-CONFIG_ARMADA_370_XP_TIMER=y
-CONFIG_ARMADA_38X_CLK=y
-CONFIG_ARMADA_THERMAL=y
-CONFIG_ARMADA_XP_CLK=y
-CONFIG_ARM_APPENDED_DTB=y
-# CONFIG_ARM_ARMADA_37XX_CPUFREQ is not set
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPU_SUSPEND=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_720789=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_GLOBAL_TIMER=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-# CONFIG_ARM_LPAE is not set
-CONFIG_ARM_MVEBU_V7_CPUIDLE=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-# CONFIG_ARM_THUMBEE is not set
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_MQ_PCI=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_FEROCEON_L2 is not set
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_COMMON_CLK=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_PJ4B=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-# CONFIG_CRYPTO_AES_ARM_CE is not set
-# CONFIG_CRYPTO_CHACHA20_NEON is not set
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-# CONFIG_CRYPTO_CRC32_ARM_CE is not set
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-# CONFIG_CRYPTO_GHASH_ARM_CE is not set
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-# CONFIG_CRYPTO_SHA1_ARM_CE is not set
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256_ARM=y
-# CONFIG_CRYPTO_SHA2_ARM_CE is not set
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ALIGN_RODATA=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/8250.S"
-CONFIG_DEBUG_MVEBU_UART0=y
-# CONFIG_DEBUG_MVEBU_UART0_ALTERNATE is not set
-# CONFIG_DEBUG_MVEBU_UART1_ALTERNATE is not set
-CONFIG_DEBUG_UART_8250=y
-# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set
-CONFIG_DEBUG_UART_8250_SHIFT=2
-# CONFIG_DEBUG_UART_8250_WORD is not set
-CONFIG_DEBUG_UART_PHYS=0xd0012000
-CONFIG_DEBUG_UART_VIRT=0xfec12000
-CONFIG_DEBUG_UNCOMPRESS=y
-CONFIG_DEBUG_USER=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_ENGINE_RAID=y
-CONFIG_DMA_OF=y
-CONFIG_DTC=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_EXT4_FS=y
-CONFIG_EXTCON=y
-# CONFIG_F2FS_CHECK_FS is not set
-CONFIG_F2FS_FS=y
-# CONFIG_F2FS_FS_SECURITY is not set
-CONFIG_F2FS_FS_XATTR=y
-CONFIG_F2FS_STAT_FS=y
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_MBCACHE=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_MSI_IRQ=y
-CONFIG_GENERIC_MSI_IRQ_DOMAIN=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PHY=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIOLIB_IRQCHIP=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_MVEBU=y
-CONFIG_GPIO_PCA953X=y
-CONFIG_GPIO_PCA953X_IRQ=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_GRO_CELLS is not set
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-CONFIG_HAVE_ARCH_BITREVERSE=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_SMCCC=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y
-CONFIG_HAVE_EBPF_JIT=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HIGHMEM=y
-# CONFIG_HIGHPTE is not set
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HWBM=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_OMAP is not set
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MV64XXX=y
-# CONFIG_I2C_PXA is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IOMMU_HELPER=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_JBD2=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PCA963X=y
-CONFIG_LEDS_TLC591XX=y
-CONFIG_LEDS_TRIGGER_DISK=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_ARMADA_370=y
-# CONFIG_MACH_ARMADA_375 is not set
-CONFIG_MACH_ARMADA_38X=y
-# CONFIG_MACH_ARMADA_39X is not set
-CONFIG_MACH_ARMADA_XP=y
-# CONFIG_MACH_DOVE is not set
-CONFIG_MACH_MVEBU_ANY=y
-CONFIG_MACH_MVEBU_V7=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MANGLE_BOOTARGS=y
-CONFIG_MARVELL_PHY=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MDIO_I2C=y
-CONFIG_MEMORY=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_MVSDIO=y
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_PCI is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_PXAV3=y
-# CONFIG_MMC_TIFM_SD is not set
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_STAA=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_PXA3xx=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_FIRMWARE=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_MVEBU_CLK_COMMON=y
-CONFIG_MVEBU_CLK_COREDIV=y
-CONFIG_MVEBU_CLK_CPU=y
-CONFIG_MVEBU_DEVBUS=y
-CONFIG_MVEBU_MBUS=y
-CONFIG_MVMDIO=y
-CONFIG_MVNETA=y
-CONFIG_MVNETA_BM=y
-CONFIG_MVNETA_BM_ENABLE=y
-CONFIG_MVPP2=y
-CONFIG_MVSW61XX_PHY=y
-CONFIG_MV_XOR=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6XXX=y
-CONFIG_NET_DSA_MV88E6XXX_GLOBAL2=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NR_CPUS=4
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_ORION_WATCHDOG=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_DOMAINS_GENERIC=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_MSI_IRQ_DOMAIN=y
-CONFIG_PCI_MVEBU=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-# CONFIG_PHY_MVEBU_CP110_COMPHY is not set
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_ARMADA_370=y
-CONFIG_PINCTRL_ARMADA_38X=y
-CONFIG_PINCTRL_ARMADA_XP=y
-CONFIG_PINCTRL_MVEBU=y
-# CONFIG_PINCTRL_SINGLE is not set
-CONFIG_PJ4B_ERRATA_4742=y
-# CONFIG_PL310_ERRATA_588369 is not set
-# CONFIG_PL310_ERRATA_727915 is not set
-CONFIG_PL310_ERRATA_753970=y
-# CONFIG_PL310_ERRATA_769419 is not set
-CONFIG_PLAT_ORION=y
-CONFIG_PM_OPP=y
-CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=11
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_NEED_SEGCBLIST=y
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_I2C=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGMAP_SPI=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_ARMADA38X=y
-CONFIG_RTC_DRV_MV=y
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RTC_MC146818_LIB=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_SATA_MV=y
-CONFIG_SATA_PMP=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SENSORS_PWM_FAN=y
-CONFIG_SENSORS_TMP421=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_MVEBU_CONSOLE=y
-CONFIG_SERIAL_MVEBU_UART=y
-CONFIG_SFP=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-# CONFIG_SPI_ARMADA_3700 is not set
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_ORION=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_SWCONFIG=y
-CONFIG_SWIOTLB=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_HWMON=y
-CONFIG_THERMAL_OF=y
-# CONFIG_THUMB2_KERNEL is not set
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_ORION=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_LEDS_TRIGGER_USBPORT=y
-CONFIG_USB_PHY=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_XHCI_HCD=y
-CONFIG_USB_XHCI_MVEBU=y
-CONFIG_USB_XHCI_PCI=y
-CONFIG_USB_XHCI_PLATFORM=y
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
diff --git a/target/linux/mvebu/cortexa53/config-4.14 b/target/linux/mvebu/cortexa53/config-4.14
deleted file mode 100644
index df5f6f341b..0000000000
--- a/target/linux/mvebu/cortexa53/config-4.14
+++ /dev/null
@@ -1,113 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_ACPI is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-# CONFIG_ARM64_PAN is not set
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_CORE is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-# CONFIG_ARM64_UAO is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_ARMADA_37XX_CPUFREQ=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HOLES_IN_ZONE=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NUMA is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCI_AARDVARK=y
-CONFIG_PCI_BUS_ADDR_T_64BIT=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SPI_ARMADA_3700=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
diff --git a/target/linux/mvebu/cortexa72/config-4.14 b/target/linux/mvebu/cortexa72/config-4.14
deleted file mode 100644
index f9bcefc4c5..0000000000
--- a/target/linux/mvebu/cortexa72/config-4.14
+++ /dev/null
@@ -1,121 +0,0 @@
-CONFIG_64BIT=y
-# CONFIG_ACPI is not set
-CONFIG_ARCH_DMA_ADDR_T_64BIT=y
-CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
-CONFIG_ARCH_HAS_FORTIFY_SOURCE=y
-CONFIG_ARCH_HAS_HOLES_MEMORYMODEL=y
-CONFIG_ARCH_HAS_KCOV=y
-CONFIG_ARCH_MMAP_RND_BITS=18
-CONFIG_ARCH_MMAP_RND_BITS_MAX=24
-CONFIG_ARCH_MMAP_RND_BITS_MIN=18
-CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=11
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX is not set
-# CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT is not set
-CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
-CONFIG_ARCH_PROC_KCORE_TEXT=y
-CONFIG_ARCH_SELECT_MEMORY_MODEL=y
-CONFIG_ARCH_SPARSEMEM_DEFAULT=y
-CONFIG_ARCH_SPARSEMEM_ENABLE=y
-CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
-CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
-CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
-CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_FRAME_POINTERS=y
-CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y
-CONFIG_ARM64=y
-# CONFIG_ARM64_16K_PAGES is not set
-CONFIG_ARM64_4K_PAGES=y
-# CONFIG_ARM64_64K_PAGES is not set
-CONFIG_ARM64_CONT_SHIFT=4
-# CONFIG_ARM64_CRYPTO is not set
-# CONFIG_ARM64_HW_AFDBM is not set
-# CONFIG_ARM64_LSE_ATOMICS is not set
-CONFIG_ARM64_PAGE_SHIFT=12
-# CONFIG_ARM64_PAN is not set
-# CONFIG_ARM64_PMEM is not set
-# CONFIG_ARM64_PTDUMP_CORE is not set
-# CONFIG_ARM64_PTDUMP_DEBUGFS is not set
-# CONFIG_ARM64_RANDOMIZE_TEXT_OFFSET is not set
-CONFIG_ARM64_SSBD=y
-# CONFIG_ARM64_UAO is not set
-CONFIG_ARM64_VA_BITS=39
-CONFIG_ARM64_VA_BITS_39=y
-# CONFIG_ARM64_VA_BITS_48 is not set
-# CONFIG_ARM64_VHE is not set
-CONFIG_ARMADA_37XX_CLK=y
-CONFIG_ARMADA_AP806_SYSCON=y
-CONFIG_ARMADA_CP110_SYSCON=y
-CONFIG_ARM_AMBA=y
-CONFIG_ARM_ARCH_TIMER=y
-CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y
-CONFIG_ARM_GIC_V2M=y
-CONFIG_ARM_GIC_V3=y
-CONFIG_ARM_GIC_V3_ITS=y
-# CONFIG_ARM_PL172_MPMC is not set
-CONFIG_ARM_PSCI_FW=y
-# CONFIG_ARM_SP805_WATCHDOG is not set
-CONFIG_AUDIT_ARCH_COMPAT_GENERIC=y
-# CONFIG_DEBUG_ALIGN_RODATA is not set
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
-CONFIG_GENERIC_CSUM=y
-CONFIG_GENERIC_IRQ_MIGRATION=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
-CONFIG_HAVE_ARCH_HUGE_VMAP=y
-CONFIG_HAVE_ARCH_KASAN=y
-CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
-CONFIG_HAVE_ARCH_VMAP_STACK=y
-CONFIG_HAVE_CMPXCHG_DOUBLE=y
-CONFIG_HAVE_CMPXCHG_LOCAL=y
-CONFIG_HAVE_DEBUG_BUGVERBOSE=y
-CONFIG_HAVE_GENERIC_GUP=y
-CONFIG_HAVE_MEMORY_PRESENT=y
-CONFIG_HAVE_PATA_PLATFORM=y
-CONFIG_HAVE_RCU_TABLE_FREE=y
-CONFIG_HOLES_IN_ZONE=y
-# CONFIG_HUGETLBFS is not set
-CONFIG_HW_RANDOM_OMAP=y
-CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
-CONFIG_MARVELL_10G_PHY=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MMC_SDHCI_XENON=y
-CONFIG_MODULES_USE_ELF_RELA=y
-CONFIG_MVEBU_GICP=y
-CONFIG_MVEBU_ICU=y
-CONFIG_MVEBU_ODMI=y
-CONFIG_MVEBU_PIC=y
-CONFIG_MV_XOR_V2=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-# CONFIG_NUMA is not set
-CONFIG_PARTITION_PERCPU=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_ARMADA_8K=y
-CONFIG_PCIE_DW=y
-CONFIG_PCIE_DW_HOST=y
-# CONFIG_PCI_AARDVARK is not set
-CONFIG_PCI_BUS_ADDR_T_64BIT=y
-CONFIG_PGTABLE_LEVELS=3
-CONFIG_PHYS_ADDR_T_64BIT=y
-CONFIG_PHY_MVEBU_CP110_COMPHY=y
-CONFIG_PINCTRL_ARMADA_37XX=y
-CONFIG_PINCTRL_ARMADA_AP806=y
-CONFIG_PINCTRL_ARMADA_CP110=y
-CONFIG_POWER_RESET=y
-CONFIG_POWER_SUPPLY=y
-# CONFIG_RANDOMIZE_BASE is not set
-CONFIG_RAS=y
-CONFIG_REGULATOR_GPIO=y
-# CONFIG_SERIAL_AMBA_PL011 is not set
-CONFIG_SPARSEMEM=y
-CONFIG_SPARSEMEM_EXTREME=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_SPARSEMEM_VMEMMAP=y
-CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
-CONFIG_SYSCTL_EXCEPTION_TRACE=y
-CONFIG_SYS_SUPPORTS_HUGETLBFS=y
-CONFIG_THREAD_INFO_IN_TASK=y
-CONFIG_UNMAP_KERNEL_AT_EL0=y
-CONFIG_VMAP_STACK=y
diff --git a/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts
deleted file mode 100644
index 2e0bed815f..0000000000
--- a/target/linux/mvebu/files-4.14/arch/arm/boot/dts/armada-385-linksys-venom.dts
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT32X (Venom)
- *
- * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385-linksys.dtsi"
-
-/ {
- model = "Linksys WRT32X";
- compatible = "linksys,venom", "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
-
- chosen {
- bootargs = "console=ttyS0,115200";
- stdout-path = "serial0:115200n8";
- append-rootblock = "root=/dev/mtdblock";
- };
-};
-
- &expander0 {
- wan_amber@0 {
- label = "venom:amber:wan";
- reg = <0x0>;
- };
-
- wan_blue@1 {
- label = "venom:blue:wan";
- reg = <0x1>;
- };
-
- usb2@5 {
- label = "venom:blue:usb2";
- reg = <0x5>;
- };
-
- usb3_1@6 {
- label = "venom:blue:usb3_1";
- reg = <0x6>;
- };
-
- usb3_2@7 {
- label = "venom:blue:usb3_2";
- reg = <0x7>;
- };
-
- wps_blue@8 {
- label = "venom:blue:wps";
- reg = <0x8>;
- };
-
- wps_amber@9 {
- label = "venom:amber:wps";
- reg = <0x9>;
- };
- };
-
- &gpio_leds {
- power {
- gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- label = "venom:blue:power";
- };
-
- sata {
- gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
- label = "venom:blue:sata";
- };
-
- wlan_2g {
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- label = "venom:blue:wlan_2g";
- };
-
- wlan_5g {
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- label = "venom:blue:wlan_5g";
- };
- };
-
- &gpio_leds_pins {
- marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56";
- };
-
- &nand {
- /* Spansion S34ML02G2 256MiB, OEM Layout */
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MB */
- read-only;
- };
-
- partition@200000 {
- label = "u_env";
- reg = <0x200000 0x20000>; /* 128KB */
- };
-
- partition@220000 {
- label = "s_env";
- reg = <0x220000 0x40000>; /* 256KB */
- };
-
- partition@180000 {
- label = "unused_area";
- reg = <0x260000 0x5c0000>; /* 5.75MB */
- };
-
- partition@7e0000 {
- label = "devinfo";
- reg = <0x7e0000 0x40000>; /* 256KB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@900000 {
- label = "kernel1";
- reg = <0x900000 0x7b00000>; /* 123MB */
- };
-
- partition@c00000 {
- label = "rootfs1";
- reg = <0xc00000 0x7800000>; /* 120MB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@8400000 {
- label = "kernel2";
- reg = <0x8400000 0x7b00000>; /* 123MB */
- };
-
- partition@8700000 {
- label = "rootfs2";
- reg = <0x8700000 0x7800000>; /* 120MB */
- };
-
- /* last MB is for the BBT, not writable */
- partition@ff00000 {
- label = "BBT";
- reg = <0xff00000 0x100000>;
- };
- };
-
-
- &pcie1 {
- mwlwifi {
- marvell,chainmask = <4 4>;
- };
- };
-
- &pcie2 {
- mwlwifi {
- marvell,chainmask = <4 4>;
- };
- };
-
- &sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
- no-1-8-v;
- non-removable;
- wp-inverted;
- bus-width = <8>;
- status = "okay";
- };
-
- &usb3_1_vbus {
- gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
- };
-
- &usb3_1_vbus_pins {
- marvell,pins = "mpp44";
- };
diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
deleted file mode 100644
index ef90a1bd38..0000000000
--- a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts
+++ /dev/null
@@ -1,28 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Board (eMMC)";
- compatible = "globalscale,espressobin-emmc", "globalscale,espressobin",
- "marvell,armada3720", "marvell,armada3710";
-};
-
-&sdhci0 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- mmccard: mmccard@0 {
- compatible = "mmc-card";
- reg = <0>;
- };
-};
diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
deleted file mode 100644
index 2b565ca8d8..0000000000
--- a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts
+++ /dev/null
@@ -1,43 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)";
- compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7",
- "globalscale,espressobin", "marvell,armada3720",
- "marvell,armada3710";
-};
-
-&ports {
- port@1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
-
- port@3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
- };
-};
-
-&sdhci0 {
- status = "okay";
-
- #address-cells = <1>;
- #size-cells = <0>;
- mmccard: mmccard@0 {
- compatible = "mmc-card";
- reg = <0>;
- };
-};
diff --git a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
deleted file mode 100644
index 8a408c3c48..0000000000
--- a/target/linux/mvebu/files-4.14/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts
+++ /dev/null
@@ -1,31 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7
- * Copyright (C) 2018 Marvell
- *
- * Romain Perier <romain.perier@free-electrons.com>
- * Konstantin Porotchkin <kostap@marvell.com>
- *
- */
-
-#include "armada-3720-espressobin.dts"
-
-/ {
- model = "Globalscale Marvell ESPRESSOBin Board V7";
- compatible = "globalscale,espressobin-v7", "globalscale,espressobin",
- "marvell,armada3720", "marvell,armada3710";
-};
-
-&ports {
- port@1 {
- reg = <1>;
- label = "lan1";
- phy-handle = <&switch0phy0>;
- };
-
- port@3 {
- reg = <3>;
- label = "wan";
- phy-handle = <&switch0phy2>;
- };
-};
diff --git a/target/linux/mvebu/patches-4.14/002-add_powertables.patch b/target/linux/mvebu/patches-4.14/002-add_powertables.patch
deleted file mode 100644
index c5a211dd40..0000000000
--- a/target/linux/mvebu/patches-4.14/002-add_powertables.patch
+++ /dev/null
@@ -1,770 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -237,11 +237,19 @@
- &pcie1 {
- /* Marvell 88W8864, 5GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ };
- };
-
- &pcie2 {
- /* Marvell 88W8864, 2GHz-only */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ };
- };
-
- &pinctrl {
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -169,3 +169,205 @@
- reg = <0x280000 0x680000>; /* 6.5MiB */
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <104 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <108 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <112 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <116 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <120 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <124 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <128 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <132 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <136 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <140 0 0x17 0x17 0x17 0x17 0x17 0x17 0x17 0x15 0x17 0x17 0x17 0x14 0x17 0x17 0x17 0x14 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x1a 0x1a 0x17 0x14 0 0xf>;
-+ CA =
-+ <36 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ CN =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x16 0x16 0x16 0x15 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0 0xf>;
-+ ETSI =
-+ <36 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <40 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <44 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <48 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <100 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>,
-+ <149 0 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0 0xf>;
-+ FCC =
-+ <36 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <40 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <44 0 0x19 0x19 0x18 0x17 0x19 0x19 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <48 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x17 0x17 0x17 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x1a 0x1a 0x18 0x17 0x19 0x19 0x17 0x15 0x18 0x18 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <153 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <157 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <161 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>,
-+ <165 0 0x1a 0x1a 0x18 0x17 0x1a 0x1a 0x17 0x15 0x1a 0x1a 0x17 0x14 0x15 0x15 0x15 0x14 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <2 2>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x00 0x00 0x00 0x00 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x00 0x00 0x00 0x00 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x00 0x00 0x00 0x00 0 0xf>;
-+ CN =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x19 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x1a 0x19 0x18 0x17 0x19 0x19 0x17 0x16 0x14 0x14 0x14 0x14 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x19 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -169,3 +169,205 @@
- reg = <0x280000 0x680000>; /* 6.5MiB */
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts
-@@ -169,3 +169,205 @@
- reg = <0x280000 0x680000>; /* 6.5MiB */
- };
- };
-+
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <153 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <157 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <161 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>,
-+ <165 0 0x19 0x19 0x19 0x17 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0x19 0x19 0x16 0x15 0 0xf>;
-+ CA =
-+ <36 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ CN =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0x14 0x14 0x14 0x14 0x13 0x13 0x13 0x13 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>,
-+ <165 0 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x13 0x14 0x14 0x14 0x14 0x10 0x10 0x10 0x10 0 0xf>;
-+ ETSI =
-+ <36 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <40 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <44 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <48 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <52 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <56 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <60 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <64 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <100 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <104 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <108 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <112 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <116 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <120 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <124 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <128 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <132 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <136 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <140 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>,
-+ <149 0 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xd 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0xe 0 0xf>;
-+ FCC =
-+ <36 0 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0 0xf>,
-+ <40 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <44 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <48 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0xf 0xf 0xf 0xf 0 0xf>,
-+ <52 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <56 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <60 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <64 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <100 0 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <104 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x12 0x12 0x12 0x12 0x10 0x10 0x10 0x10 0 0xf>,
-+ <108 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <112 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <116 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <120 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <124 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <128 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <132 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <136 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <140 0 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <153 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <157 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <161 0 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>,
-+ <165 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0 0xf>;
-+ };
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ AU =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ CA =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ CN =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <14 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ ETSI =
-+ <1 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0xa 0x0 0x0 0x0 0x0 0 0xf>;
-+ FCC =
-+ <1 0 0x17 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0xe 0xe 0xe 0xe 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x18 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x11 0x11 0x11 0x11 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x12 0x12 0x12 0x13 0x13 0x13 0x13 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
-+};
---- a/arch/arm/boot/dts/armada-385-linksys-rango.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts
-@@ -184,6 +184,18 @@
- };
- };
-
-+&pcie1 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
-+&pcie2 {
-+ mwlwifi {
-+ marvell,chainmask = <4 4>;
-+ };
-+};
-+
- &sdhci {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -376,12 +376,100 @@
- pcie@2,0 {
- /* Port 0, Lane 1 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,5ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <1 0 0x17 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0xf 0xf 0xf 0xf 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0x17 0x16 0x16 0x16 0x16 0x16 0x16 0x14 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0x17 0x11 0x11 0x11 0x11 0x11 0x11 0x11 0x10 0x10 0x10 0x10 0x0 0x0 0x0 0x0 0 0xf>;
-+
-+ ETSI =
-+ <1 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <2 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <3 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <4 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <5 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <6 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <7 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <8 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <9 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <10 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <11 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <12 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>,
-+ <13 0 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0xb 0x0 0x0 0x0 0x0 0 0xf>;
-+ };
-+ };
- };
-
- /* Second mini-PCIe port */
- pcie@3,0 {
- /* Port 0, Lane 3 */
- status = "okay";
-+
-+ mwlwifi {
-+ marvell,2ghz = <0>;
-+ marvell,chainmask = <4 4>;
-+ marvell,powertable {
-+ FCC =
-+ <36 0 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <40 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <44 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <48 0 0x8 0x8 0x8 0x8 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0x9 0 0xf>,
-+ <52 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <56 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <60 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <64 0 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0xf 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0x12 0 0xf>,
-+ <100 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <104 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <108 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <112 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <116 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <120 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <124 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <128 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <132 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <136 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <140 0 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0x14 0 0xf>,
-+ <149 0 0x16 0x16 0x16 0x16 0x14 0x14 0x14 0x14 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <153 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <157 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <161 0 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>,
-+ <165 0 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x16 0x15 0x15 0x15 0x15 0x14 0x14 0x14 0x14 0 0xf>;
-+
-+ ETSI =
-+ <36 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <40 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <44 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <48 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <52 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <56 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <60 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <64 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <100 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <104 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <108 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <112 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <116 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <120 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <124 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <128 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <132 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <136 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <140 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>,
-+ <149 0 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xc 0xd 0xd 0xd 0xd 0xc 0xc 0xc 0xc 0 0xf>;
-+ };
-+ };
- };
- };
-
diff --git a/target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch b/target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch
deleted file mode 100644
index 5d43d9f0f8..0000000000
--- a/target/linux/mvebu/patches-4.14/003-add_switch_nodes.patch
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -361,6 +361,16 @@
- };
- };
- };
-+
-+ mvsw61xx {
-+ compatible = "marvell,88e6172";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ };
- };
-
- &pciec {
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -113,6 +113,18 @@
- linux,default-trigger = "disk-activity";
- };
- };
-+
-+ mvsw61xx {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "marvell,88e6176";
-+ status = "okay";
-+ reg = <0x10>;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ cpu-port-1 = <6>;
-+ };
- };
-
- &ahci0 {
diff --git a/target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch b/target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch
deleted file mode 100644
index 1a2b33cb1a..0000000000
--- a/target/linux/mvebu/patches-4.14/004-add_sata_disk_activity_trigger.patch
+++ /dev/null
@@ -1,39 +0,0 @@
-From 172230195068703b78ad5733a09492f5d6814c09 Mon Sep 17 00:00:00 2001
-From: Ansuel Smith <ansuelsmth@gmail.com>
-Date: Tue, 28 Feb 2017 14:15:50 +0100
-Subject: [PATCH] ARM: dts: armada: Add default trigger for sata led
-
-In others board we have the sata led set to function
-with the sata led trigger by default.
-This patch makes the same for these board that have sata
-led but get disabled by not associating it to any trigger.
-
-Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
-Acked-by: Jason Cooper <jason@lakedaemon.net>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-linksys-caiman.dts | 1 +
- arch/arm/boot/dts/armada-385-linksys-cobra.dts | 1 +
- arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 1 +
- 3 files changed, 3 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-caiman.dts
-@@ -100,6 +100,7 @@
-
- sata {
- label = "caiman:white:sata";
-+ linux,default-trigger = "disk-activity";
- };
- };
-
---- a/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-+++ b/arch/arm/boot/dts/armada-385-linksys-cobra.dts
-@@ -100,6 +100,7 @@
-
- sata {
- label = "cobra:white:sata";
-+ linux,default-trigger = "disk-activity";
- };
- };
-
diff --git a/target/linux/mvebu/patches-4.14/005-linksys_hardcode_nand_ecc_settings.patch b/target/linux/mvebu/patches-4.14/005-linksys_hardcode_nand_ecc_settings.patch
deleted file mode 100644
index c00e153239..0000000000
--- a/target/linux/mvebu/patches-4.14/005-linksys_hardcode_nand_ecc_settings.patch
+++ /dev/null
@@ -1,17 +0,0 @@
-Newer Linksys boards might come with a Winbond W29N02GV which can be
-configured in different ways. Make sure we configure it the same way
-as the older chips so everything keeps working.
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -185,6 +185,8 @@
- /* 128MiB or 256MiB */
- status = "okay";
- num-cs = <1>;
-+ nand-ecc-strength = <4>;
-+ nand-ecc-step-size = <512>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
diff --git a/target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
deleted file mode 100644
index 4ef86edb6a..0000000000
--- a/target/linux/mvebu/patches-4.14/006-mvebu-Mangle-bootloader-s-kernel-arguments.patch
+++ /dev/null
@@ -1,201 +0,0 @@
-From 71270226b14733a4b1f2cde58ea9265caa50b38d Mon Sep 17 00:00:00 2001
-From: Adrian Panella <ianchi74@outlook.com>
-Date: Thu, 9 Mar 2017 09:37:17 +0100
-Subject: [PATCH 67/69] generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
-This patch has been modified to be mvebu specific. The original patch
-did not pass the bootloader cmdline on if no append-rootblock stanza
-was found, resulting in blank cmdline and failure to boot.
-
-Signed-off-by: Michael Gray <michael.gray@lantisproject.com>
----
- arch/arm/Kconfig | 11 +++++
- arch/arm/boot/compressed/atags_to_fdt.c | 72 ++++++++++++++++++++++++++++++++-
- init/main.c | 16 ++++++++
- 3 files changed, 98 insertions(+), 1 deletion(-)
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1934,6 +1934,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- The command-line arguments provided by the boot loader will be
- appended to the the device tree bootargs property.
-
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ bool "Append rootblock parsing bootloader's kernel arguments"
-+ help
-+ The command-line arguments provided by the boot loader will be
-+ appended to a new device tree property: bootloader-args.
-+ If there is a property "append-rootblock" in DT under /chosen
-+ and a root= option in bootloaders command line it will be parsed
-+ and added to DT bootargs with the form: <append-rootblock>XX.
-+ Only command line ATAG will be processed, the rest of the ATAGs
-+ sent by bootloader will be ignored.
-+
- endchoice
-
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -4,6 +4,8 @@
-
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -67,6 +69,65 @@ static uint32_t get_cell_size(const void
- return cell_size;
- }
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+ char *ptr, *end;
-+ char *root="root=";
-+ int i, l;
-+ const char *rootblock;
-+
-+ //ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+ ptr = str - 1;
-+
-+ do {
-+ //first find an 'r' at the begining or after a space
-+ do {
-+ ptr++;
-+ ptr = strchr(ptr, 'r');
-+ if(!ptr) return dest;
-+
-+ } while (ptr != str && *(ptr-1) != ' ');
-+
-+ //then check for the rest
-+ for(i = 1; i <= 4; i++)
-+ if(*(ptr+i) != *(root+i)) break;
-+
-+ } while (i != 5);
-+
-+ end = strchr(ptr, ' ');
-+ end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+ //find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+ for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+ ptr = end + 1;
-+
-+ /* if append-rootblock property is set use it to append to command line */
-+ rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+ if(rootblock != NULL) {
-+ if(*dest != ' ') {
-+ *dest = ' ';
-+ dest++;
-+ len++;
-+ }
-+ if (len + l + i <= COMMAND_LINE_SIZE) {
-+ memcpy(dest, rootblock, l);
-+ dest += l - 1;
-+ memcpy(dest, ptr, i);
-+ dest += i;
-+ }
-+ } else {
-+ len = strlen(str);
-+ if (len + 1 < COMMAND_LINE_SIZE) {
-+ memcpy(dest, str, len);
-+ dest += len;
-+ }
-+ }
-+ return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- char cmdline[COMMAND_LINE_SIZE];
-@@ -86,12 +147,21 @@ static void merge_fdt_bootargs(void *fdt
-
- /* and append the ATAG_CMDLINE */
- if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //save original bootloader args
-+ //and append ubi.mtd with root partition number to current cmdline
-+ setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+ ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- len = strlen(fdt_cmdline);
- if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- *ptr++ = ' ';
- memcpy(ptr, fdt_cmdline, len);
- ptr += len;
- }
-+#endif
- }
- *ptr = '\0';
-
-@@ -148,7 +218,9 @@ int atags_to_fdt(void *atag_list, void *
- else
- setprop_string(fdt, "/chosen", "bootargs",
- atag->u.cmdline.cmdline);
-- } else if (atag->hdr.tag == ATAG_MEM) {
-+ }
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+ else if (atag->hdr.tag == ATAG_MEM) {
- if (memcount >= sizeof(mem_reg_property)/4)
- continue;
- if (!atag->u.mem.size)
-@@ -187,6 +259,10 @@ int atags_to_fdt(void *atag_list, void *
- setprop(fdt, "/memory", "reg", mem_reg_property,
- 4 * memcount * memsize);
- }
-+#else
-+
-+ }
-+#endif
-
- return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -95,6 +95,10 @@
- #include <asm/sections.h>
- #include <asm/cacheflush.h>
-
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
-
- extern void init_IRQ(void);
-@@ -573,6 +577,18 @@ asmlinkage __visible void __init start_k
- page_alloc_init();
-
- pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+ //Show bootloader's original command line for reference
-+ if(of_chosen) {
-+ const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+ if(prop)
-+ pr_notice("Bootloader command line (ignored): %s\n", prop);
-+ else
-+ pr_notice("Bootloader command line not present\n");
-+ }
-+#endif
-+
- /* parameters may set static keys */
- jump_label_init();
- parse_early_param();
diff --git a/target/linux/mvebu/patches-4.14/100-find_active_root.patch b/target/linux/mvebu/patches-4.14/100-find_active_root.patch
deleted file mode 100644
index f52a5108b8..0000000000
--- a/target/linux/mvebu/patches-4.14/100-find_active_root.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-The WRT1900AC among other Linksys routers uses a dual-firmware layout.
-Dynamically rename the active partition to "ubi".
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
-
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -25,6 +25,8 @@ static bool node_has_compatible(struct d
- return of_get_property(pp, "compatible", NULL);
- }
-
-+static int mangled_rootblock;
-+
- static int parse_fixed_partitions(struct mtd_info *master,
- const struct mtd_partition **pparts,
- struct mtd_part_parser_data *data)
-@@ -33,6 +35,7 @@ static int parse_fixed_partitions(struct
- struct device_node *mtd_node;
- struct device_node *ofpart_node;
- const char *partname;
-+ const char *owrtpart = "ubi";
- struct device_node *pp;
- int nr_parts, i, ret = 0;
- bool dedicated = true;
-@@ -110,9 +113,13 @@ static int parse_fixed_partitions(struct
- parts[i].size = of_read_number(reg + a_cells, s_cells);
- parts[i].of_node = pp;
-
-- partname = of_get_property(pp, "label", &len);
-- if (!partname)
-- partname = of_get_property(pp, "name", &len);
-+ if (mangled_rootblock && (i == mangled_rootblock)) {
-+ partname = owrtpart;
-+ } else {
-+ partname = of_get_property(pp, "label", &len);
-+ if (!partname)
-+ partname = of_get_property(pp, "name", &len);
-+ }
- parts[i].name = partname;
-
- if (of_get_property(pp, "read-only", &len))
-@@ -219,6 +226,18 @@ static int __init ofpart_parser_init(voi
- return 0;
- }
-
-+static int __init active_root(char *str)
-+{
-+ get_option(&str, &mangled_rootblock);
-+
-+ if (!mangled_rootblock)
-+ return 1;
-+
-+ return 1;
-+}
-+
-+__setup("mangled_rootblock=", active_root);
-+
- static void __exit ofpart_parser_exit(void)
- {
- deregister_mtd_parser(&ofpart_parser);
diff --git a/target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch
deleted file mode 100644
index 77583ac0b5..0000000000
--- a/target/linux/mvebu/patches-4.14/102-revert_i2c_delay.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -274,12 +274,10 @@
- };
-
- &i2c0 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11000 0x100>;
- };
-
- &i2c1 {
-- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- reg = <0x11100 0x100>;
- };
-
diff --git a/target/linux/mvebu/patches-4.14/103-remove-nand-driver-bug.patch b/target/linux/mvebu/patches-4.14/103-remove-nand-driver-bug.patch
deleted file mode 100644
index 19a2a1e276..0000000000
--- a/target/linux/mvebu/patches-4.14/103-remove-nand-driver-bug.patch
+++ /dev/null
@@ -1,13 +0,0 @@
-Remove a BUG() call that would crash on a race condition that should
-otherwise be harmless.
-
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -727,7 +727,6 @@ static void handle_data_pio(struct pxa3x
- default:
- dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
- info->state);
-- BUG();
- }
-
- /* Update buffer pointers for multi-page read/write */
diff --git a/target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch b/target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch
deleted file mode 100644
index f6c7239ab2..0000000000
--- a/target/linux/mvebu/patches-4.14/104-linksys_mamba_disable_keep_config.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -200,7 +200,6 @@
- nand@d0000 {
- status = "okay";
- num-cs = <1>;
-- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
- nand-ecc-strength = <4>;
diff --git a/target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch b/target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch
deleted file mode 100644
index 223ee652d8..0000000000
--- a/target/linux/mvebu/patches-4.14/110-pxa3xxx_revert_irq_thread.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-Revert "mtd: pxa3xx-nand: handle PIO in threaded interrupt"
-
-This reverts commit 24542257a3b987025d4b998ec2d15e556c98ad3f
-This upstream change has been causing spurious timeouts on accesses
-to the NAND flash if something else on the system is causing
-significant latency.
-
-Nothing guarantees that the thread will run in time, so the
-usual timeout is unreliable.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
-
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -791,24 +791,11 @@ static void start_data_dma(struct pxa3xx
- __func__, direction, info->dma_cookie, info->sg.length);
- }
-
--static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
--{
-- struct pxa3xx_nand_info *info = data;
--
-- handle_data_pio(info);
--
-- info->state = STATE_CMD_DONE;
-- nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
--
-- return IRQ_HANDLED;
--}
--
- static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
- {
- struct pxa3xx_nand_info *info = devid;
- unsigned int status, is_completed = 0, is_ready = 0;
- unsigned int ready, cmd_done;
-- irqreturn_t ret = IRQ_HANDLED;
-
- if (info->cs == 0) {
- ready = NDSR_FLASH_RDY;
-@@ -850,8 +837,7 @@ static irqreturn_t pxa3xx_nand_irq(int i
- } else {
- info->state = (status & NDSR_RDDREQ) ?
- STATE_PIO_READING : STATE_PIO_WRITING;
-- ret = IRQ_WAKE_THREAD;
-- goto NORMAL_IRQ_EXIT;
-+ handle_data_pio(info);
- }
- }
- if (status & cmd_done) {
-@@ -896,7 +882,7 @@ static irqreturn_t pxa3xx_nand_irq(int i
- if (is_ready)
- complete(&info->dev_ready);
- NORMAL_IRQ_EXIT:
-- return ret;
-+ return IRQ_HANDLED;
- }
-
- static inline int is_buf_blank(uint8_t *buf, size_t len)
-@@ -1865,9 +1851,7 @@ static int alloc_nand_resource(struct pl
- /* initialize all interrupts to be disabled */
- disable_int(info, NDSR_MASK);
-
-- ret = request_threaded_irq(irq, pxa3xx_nand_irq,
-- pxa3xx_nand_irq_thread, IRQF_ONESHOT,
-- pdev->name, info);
-+ ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info);
- if (ret < 0) {
- dev_err(&pdev->dev, "failed to request IRQ: %d\n", ret);
- goto fail_free_buf;
diff --git a/target/linux/mvebu/patches-4.14/205-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-4.14/205-armada-385-rd-mtd-partitions.patch
deleted file mode 100644
index e75a5eebda..0000000000
--- a/target/linux/mvebu/patches-4.14/205-armada-385-rd-mtd-partitions.patch
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-rd.dts
-+++ b/arch/arm/boot/dts/armada-388-rd.dts
-@@ -140,6 +140,16 @@
- compatible = "st,m25p128", "jedec,spi-nor";
- reg = <0>; /* Chip select 0 */
- spi-max-frequency = <108000000>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0 0x400000>;
-+ };
-+
-+ partition@1 {
-+ label = "firmware";
-+ reg = <0x400000 0xc00000>;
-+ };
- };
- };
-
diff --git a/target/linux/mvebu/patches-4.14/206-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-4.14/206-ARM-mvebu-385-ap-Add-partitions.patch
deleted file mode 100644
index b7af272360..0000000000
--- a/target/linux/mvebu/patches-4.14/206-ARM-mvebu-385-ap-Add-partitions.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001
-From: Maxime Ripard <maxime.ripard@free-electrons.com>
-Date: Tue, 13 Jan 2015 11:14:09 +0100
-Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions
-
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-db-ap.dts
-+++ b/arch/arm/boot/dts/armada-385-db-ap.dts
-@@ -181,19 +181,19 @@
- #size-cells = <1>;
-
- partition@0 {
-- label = "U-Boot";
-+ label = "u-boot";
- reg = <0x00000000 0x00800000>;
- read-only;
- };
-
- partition@800000 {
-- label = "uImage";
-+ label = "kernel";
- reg = <0x00800000 0x00400000>;
- read-only;
- };
-
- partition@c00000 {
-- label = "Root";
-+ label = "ubi";
- reg = <0x00c00000 0x3f400000>;
- };
- };
diff --git a/target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch b/target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch
deleted file mode 100644
index e880cc13e7..0000000000
--- a/target/linux/mvebu/patches-4.14/210-clearfog_switch_node.patch
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/arch/arm/boot/dts/armada-388-clearfog.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
-@@ -129,6 +129,18 @@
- };
- };
-
-+ mvsw61xx {
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ compatible = "marvell,88e6176";
-+ status = "okay";
-+ reg = <0x4>;
-+ is-indirect;
-+
-+ mii-bus = <&mdio>;
-+ cpu-port-0 = <5>;
-+ };
-+
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-0 = <&rear_button_pins>;
diff --git a/target/linux/mvebu/patches-4.14/220-disable-untested-dsa-boards.patch b/target/linux/mvebu/patches-4.14/220-disable-untested-dsa-boards.patch
deleted file mode 100644
index 5df94bdfad..0000000000
--- a/target/linux/mvebu/patches-4.14/220-disable-untested-dsa-boards.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -196,6 +196,7 @@
- status = "okay";
-
- switch@0 {
-+ status = "disabled";
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/armada-388-clearfog.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
-@@ -202,6 +202,7 @@
- status = "okay";
-
- switch@4 {
-+ status = "disabled";
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -516,6 +516,7 @@
- status = "okay";
-
- switch@0 {
-+ status = "disabled";
- compatible = "marvell,mv88e6085";
- #address-cells = <1>;
- #size-cells = <0>;
diff --git a/target/linux/mvebu/patches-4.14/230-armada-xp-linksys-mamba-broken-idle.patch b/target/linux/mvebu/patches-4.14/230-armada-xp-linksys-mamba-broken-idle.patch
deleted file mode 100644
index e82a899a75..0000000000
--- a/target/linux/mvebu/patches-4.14/230-armada-xp-linksys-mamba-broken-idle.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-+++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts
-@@ -563,3 +563,7 @@
- };
- };
- };
-+
-+&coherencyfab {
-+ broken-idle;
-+};
diff --git a/target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch b/target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch
deleted file mode 100644
index f21f8083ee..0000000000
--- a/target/linux/mvebu/patches-4.14/300-mvneta-tx-queue-workaround.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-The hardware queue scheduling is apparently configured with fixed
-priorities, which creates a nasty fairness issue where traffic from one
-CPU can starve traffic from all other CPUs.
-
-Work around this issue by forcing all tx packets to go through one CPU,
-until this issue is fixed properly.
-
-Signed-off-by: Felix Fietkau <nbd@nbd.name>
----
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -3961,6 +3961,15 @@ static int mvneta_ethtool_set_wol(struct
- return ret;
- }
-
-+static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
-+ void *accel_priv,
-+ select_queue_fallback_t fallback)
-+{
-+ /* XXX: hardware queue scheduling is broken,
-+ * use only one queue until it is fixed */
-+ return 0;
-+}
-+
- static const struct net_device_ops mvneta_netdev_ops = {
- .ndo_open = mvneta_open,
- .ndo_stop = mvneta_stop,
-@@ -3971,6 +3980,7 @@ static const struct net_device_ops mvnet
- .ndo_fix_features = mvneta_fix_features,
- .ndo_get_stats64 = mvneta_get_stats64,
- .ndo_do_ioctl = mvneta_ioctl,
-+ .ndo_select_queue = mvneta_select_queue,
- };
-
- static const struct ethtool_ops mvneta_eth_tool_ops = {
diff --git a/target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch b/target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
deleted file mode 100644
index 29f36be460..0000000000
--- a/target/linux/mvebu/patches-4.14/400-cpuidle-mvebu-indicate-failure-to-enter-deeper-sleep.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From c28b2d367da8a471482e6a4aa8337ab6369a80c2 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 3 Oct 2015 09:13:05 +0100
-Subject: cpuidle: mvebu: indicate failure to enter deeper sleep states
-
-The cpuidle ->enter method expects the return value to be the sleep
-state we entered. Returning negative numbers or other codes is not
-permissible since coupled CPU idle was merged.
-
-At least some of the mvebu_v7_cpu_suspend() implementations return the
-value from cpu_suspend(), which returns zero if the CPU vectors back
-into the kernel via cpu_resume() (the success case), or the non-zero
-return value of the suspend actor, or one (failure cases).
-
-We do not want to be returning the failure case value back to CPU idle
-as that indicates that we successfully entered one of the deeper idle
-states. Always return zero instead, indicating that we slept for the
-shortest amount of time.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/cpuidle/cpuidle-mvebu-v7.c | 6 +++++-
- 1 file changed, 5 insertions(+), 1 deletion(-)
-
---- a/drivers/cpuidle/cpuidle-mvebu-v7.c
-+++ b/drivers/cpuidle/cpuidle-mvebu-v7.c
-@@ -39,8 +39,12 @@ static int mvebu_v7_enter_idle(struct cp
- ret = mvebu_v7_cpu_suspend(deepidle);
- cpu_pm_exit();
-
-+ /*
-+ * If we failed to enter the desired state, indicate that we
-+ * slept lightly.
-+ */
- if (ret)
-- return ret;
-+ return 0;
-
- return index;
- }
diff --git a/target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch b/target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch
deleted file mode 100644
index 504d110264..0000000000
--- a/target/linux/mvebu/patches-4.14/401-pci-mvebu-time-out-reset-on-link-up.patch
+++ /dev/null
@@ -1,60 +0,0 @@
-From 287b9df160b6159f8d385424904f8bac501280c1 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 9 Jul 2016 10:58:16 +0100
-Subject: pci: mvebu: time out reset on link up
-
-If the port reports that the link is up while we are resetting, there's
-little point in waiting for the full duration.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/pci/host/pci-mvebu.c | 20 ++++++++++++++------
- 1 file changed, 14 insertions(+), 6 deletions(-)
-
---- a/drivers/pci/host/pci-mvebu.c
-+++ b/drivers/pci/host/pci-mvebu.c
-@@ -1167,6 +1167,7 @@ static int mvebu_pcie_powerup(struct mve
-
- if (port->reset_gpio) {
- u32 reset_udelay = PCI_PM_D3COLD_WAIT * 1000;
-+ unsigned int i;
-
- of_property_read_u32(port->dn, "reset-delay-us",
- &reset_udelay);
-@@ -1174,7 +1175,13 @@ static int mvebu_pcie_powerup(struct mve
- udelay(100);
-
- gpiod_set_value_cansleep(port->reset_gpio, 0);
-- msleep(reset_udelay / 1000);
-+ for (i = 0; i < reset_udelay; i += 1000) {
-+ if (mvebu_pcie_link_up(port))
-+ break;
-+ msleep(1);
-+ }
-+
-+ printk("%s: reset completed in %dus\n", port->name, i);
- }
-
- return 0;
-@@ -1261,15 +1268,16 @@ static int mvebu_pcie_probe(struct platf
- if (!child)
- continue;
-
-- ret = mvebu_pcie_powerup(port);
-- if (ret < 0)
-- continue;
--
- port->base = mvebu_pcie_map_registers(pdev, child, port);
- if (IS_ERR(port->base)) {
- dev_err(dev, "%s: cannot map registers\n", port->name);
- port->base = NULL;
-- mvebu_pcie_powerdown(port);
-+ continue;
-+ }
-+
-+ ret = mvebu_pcie_powerup(port);
-+ if (ret < 0) {
-+ port->base = NULL;
- continue;
- }
-
diff --git a/target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch b/target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch
deleted file mode 100644
index c531c375a0..0000000000
--- a/target/linux/mvebu/patches-4.14/402-sfp-display-SFP-module-information.patch
+++ /dev/null
@@ -1,290 +0,0 @@
-From e76632d118659347d9261a4470d9f60bfbe0044c Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sun, 13 Sep 2015 01:06:31 +0100
-Subject: sfp: display SFP module information
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/net/phy/sfp.c | 254 +++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 253 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -265,6 +265,184 @@ static unsigned int sfp_check(void *buf,
- return check;
- }
-
-+static const char *sfp_link_len(char *buf, size_t size, unsigned int length,
-+ unsigned int multiplier)
-+{
-+ if (length == 0)
-+ return "unsupported/unspecified";
-+
-+ if (length == 255) {
-+ *buf++ = '>';
-+ size -= 1;
-+ length -= 1;
-+ }
-+
-+ length *= multiplier;
-+
-+ if (length >= 1000)
-+ snprintf(buf, size, "%u.%0*ukm",
-+ length / 1000,
-+ multiplier > 100 ? 1 :
-+ multiplier > 10 ? 2 : 3,
-+ length % 1000);
-+ else
-+ snprintf(buf, size, "%um", length);
-+
-+ return buf;
-+}
-+
-+struct bitfield {
-+ unsigned int mask;
-+ unsigned int val;
-+ const char *str;
-+};
-+
-+static const struct bitfield sfp_options[] = {
-+ {
-+ .mask = SFP_OPTIONS_HIGH_POWER_LEVEL,
-+ .val = SFP_OPTIONS_HIGH_POWER_LEVEL,
-+ .str = "hpl",
-+ }, {
-+ .mask = SFP_OPTIONS_PAGING_A2,
-+ .val = SFP_OPTIONS_PAGING_A2,
-+ .str = "paginga2",
-+ }, {
-+ .mask = SFP_OPTIONS_RETIMER,
-+ .val = SFP_OPTIONS_RETIMER,
-+ .str = "retimer",
-+ }, {
-+ .mask = SFP_OPTIONS_COOLED_XCVR,
-+ .val = SFP_OPTIONS_COOLED_XCVR,
-+ .str = "cooled",
-+ }, {
-+ .mask = SFP_OPTIONS_POWER_DECL,
-+ .val = SFP_OPTIONS_POWER_DECL,
-+ .str = "powerdecl",
-+ }, {
-+ .mask = SFP_OPTIONS_RX_LINEAR_OUT,
-+ .val = SFP_OPTIONS_RX_LINEAR_OUT,
-+ .str = "rxlinear",
-+ }, {
-+ .mask = SFP_OPTIONS_RX_DECISION_THRESH,
-+ .val = SFP_OPTIONS_RX_DECISION_THRESH,
-+ .str = "rxthresh",
-+ }, {
-+ .mask = SFP_OPTIONS_TUNABLE_TX,
-+ .val = SFP_OPTIONS_TUNABLE_TX,
-+ .str = "tunabletx",
-+ }, {
-+ .mask = SFP_OPTIONS_RATE_SELECT,
-+ .val = SFP_OPTIONS_RATE_SELECT,
-+ .str = "ratesel",
-+ }, {
-+ .mask = SFP_OPTIONS_TX_DISABLE,
-+ .val = SFP_OPTIONS_TX_DISABLE,
-+ .str = "txdisable",
-+ }, {
-+ .mask = SFP_OPTIONS_TX_FAULT,
-+ .val = SFP_OPTIONS_TX_FAULT,
-+ .str = "txfault",
-+ }, {
-+ .mask = SFP_OPTIONS_LOS_INVERTED,
-+ .val = SFP_OPTIONS_LOS_INVERTED,
-+ .str = "los-",
-+ }, {
-+ .mask = SFP_OPTIONS_LOS_NORMAL,
-+ .val = SFP_OPTIONS_LOS_NORMAL,
-+ .str = "los+",
-+ }, { }
-+};
-+
-+static const struct bitfield diagmon[] = {
-+ {
-+ .mask = SFP_DIAGMON_DDM,
-+ .val = SFP_DIAGMON_DDM,
-+ .str = "ddm",
-+ }, {
-+ .mask = SFP_DIAGMON_INT_CAL,
-+ .val = SFP_DIAGMON_INT_CAL,
-+ .str = "intcal",
-+ }, {
-+ .mask = SFP_DIAGMON_EXT_CAL,
-+ .val = SFP_DIAGMON_EXT_CAL,
-+ .str = "extcal",
-+ }, {
-+ .mask = SFP_DIAGMON_RXPWR_AVG,
-+ .val = SFP_DIAGMON_RXPWR_AVG,
-+ .str = "rxpwravg",
-+ }, { }
-+};
-+
-+static const char *sfp_bitfield(char *out, size_t outsz, const struct bitfield *bits, unsigned int val)
-+{
-+ char *p = out;
-+ int n;
-+
-+ *p = '\0';
-+ while (bits->mask) {
-+ if ((val & bits->mask) == bits->val) {
-+ n = snprintf(p, outsz, "%s%s",
-+ out != p ? ", " : "",
-+ bits->str);
-+ if (n == outsz)
-+ break;
-+ p += n;
-+ outsz -= n;
-+ }
-+ bits++;
-+ }
-+
-+ return out;
-+}
-+
-+static const char *sfp_connector(unsigned int connector)
-+{
-+ switch (connector) {
-+ case SFP_CONNECTOR_UNSPEC:
-+ return "unknown/unspecified";
-+ case SFP_CONNECTOR_SC:
-+ return "SC";
-+ case SFP_CONNECTOR_FIBERJACK:
-+ return "Fiberjack";
-+ case SFP_CONNECTOR_LC:
-+ return "LC";
-+ case SFP_CONNECTOR_MT_RJ:
-+ return "MT-RJ";
-+ case SFP_CONNECTOR_MU:
-+ return "MU";
-+ case SFP_CONNECTOR_SG:
-+ return "SG";
-+ case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-+ return "Optical pigtail";
-+ case SFP_CONNECTOR_HSSDC_II:
-+ return "HSSDC II";
-+ case SFP_CONNECTOR_COPPER_PIGTAIL:
-+ return "Copper pigtail";
-+ default:
-+ return "unknown";
-+ }
-+}
-+
-+static const char *sfp_encoding(unsigned int encoding)
-+{
-+ switch (encoding) {
-+ case SFP_ENCODING_UNSPEC:
-+ return "unspecified";
-+ case SFP_ENCODING_8472_64B66B:
-+ return "64b66b";
-+ case SFP_ENCODING_8B10B:
-+ return "8b10b";
-+ case SFP_ENCODING_4B5B:
-+ return "4b5b";
-+ case SFP_ENCODING_NRZ:
-+ return "NRZ";
-+ case SFP_ENCODING_8472_MANCHESTER:
-+ return "MANCHESTER";
-+ default:
-+ return "unknown";
-+ }
-+}
-+
- /* Helpers */
- static void sfp_module_tx_disable(struct sfp *sfp)
- {
-@@ -433,6 +611,7 @@ static int sfp_sm_mod_probe(struct sfp *
- char sn[17];
- char date[9];
- char rev[5];
-+ char options[80];
- u8 check;
- int err;
-
-@@ -476,10 +655,83 @@ static int sfp_sm_mod_probe(struct sfp *
- rev[4] = '\0';
- memcpy(sn, sfp->id.ext.vendor_sn, 16);
- sn[16] = '\0';
-- memcpy(date, sfp->id.ext.datecode, 8);
-+ date[0] = sfp->id.ext.datecode[4];
-+ date[1] = sfp->id.ext.datecode[5];
-+ date[2] = '-';
-+ date[3] = sfp->id.ext.datecode[2];
-+ date[4] = sfp->id.ext.datecode[3];
-+ date[5] = '-';
-+ date[6] = sfp->id.ext.datecode[0];
-+ date[7] = sfp->id.ext.datecode[1];
- date[8] = '\0';
-
- dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date);
-+ dev_info(sfp->dev, " %s connector, encoding %s, nominal bitrate %u.%uGbps +%u%% -%u%%\n",
-+ sfp_connector(sfp->id.base.connector),
-+ sfp_encoding(sfp->id.base.encoding),
-+ sfp->id.base.br_nominal / 10,
-+ sfp->id.base.br_nominal % 10,
-+ sfp->id.ext.br_max, sfp->id.ext.br_min);
-+ dev_info(sfp->dev, " 1000BaseSX%c 1000BaseLX%c 1000BaseCX%c 1000BaseT%c 100BaseTLX%c 1000BaseFX%c BaseBX10%c BasePX%c\n",
-+ sfp->id.base.e1000_base_sx ? '+' : '-',
-+ sfp->id.base.e1000_base_lx ? '+' : '-',
-+ sfp->id.base.e1000_base_cx ? '+' : '-',
-+ sfp->id.base.e1000_base_t ? '+' : '-',
-+ sfp->id.base.e100_base_lx ? '+' : '-',
-+ sfp->id.base.e100_base_fx ? '+' : '-',
-+ sfp->id.base.e_base_bx10 ? '+' : '-',
-+ sfp->id.base.e_base_px ? '+' : '-');
-+ dev_info(sfp->dev, " 10GBaseSR%c 10GBaseLR%c 10GBaseLRM%c 10GBaseER%c\n",
-+ sfp->id.base.e10g_base_sr ? '+' : '-',
-+ sfp->id.base.e10g_base_lr ? '+' : '-',
-+ sfp->id.base.e10g_base_lrm ? '+' : '-',
-+ sfp->id.base.e10g_base_er ? '+' : '-');
-+
-+ if (!sfp->id.base.sfp_ct_passive && !sfp->id.base.sfp_ct_active &&
-+ !sfp->id.base.e1000_base_t) {
-+ char len_9um[16], len_om[16];
-+
-+ dev_info(sfp->dev, " Wavelength %unm, fiber lengths:\n",
-+ be16_to_cpup(&sfp->id.base.optical_wavelength));
-+
-+ if (sfp->id.base.link_len[0] == 255)
-+ strcpy(len_9um, ">254km");
-+ else if (sfp->id.base.link_len[1] && sfp->id.base.link_len[1] != 255)
-+ sprintf(len_9um, "%um",
-+ sfp->id.base.link_len[1] * 100);
-+ else if (sfp->id.base.link_len[0])
-+ sprintf(len_9um, "%ukm", sfp->id.base.link_len[0]);
-+ else if (sfp->id.base.link_len[1] == 255)
-+ strcpy(len_9um, ">25.4km");
-+ else
-+ strcpy(len_9um, "unsupported");
-+
-+ dev_info(sfp->dev, " 9µm SM : %s\n", len_9um);
-+ dev_info(sfp->dev, " 62.5µm MM OM1: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[3], 10));
-+ dev_info(sfp->dev, " 50µm MM OM2: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[2], 10));
-+ dev_info(sfp->dev, " 50µm MM OM3: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[5], 10));
-+ dev_info(sfp->dev, " 50µm MM OM4: %s\n",
-+ sfp_link_len(len_om, sizeof(len_om),
-+ sfp->id.base.link_len[4], 10));
-+ } else {
-+ char len[16];
-+ dev_info(sfp->dev, " Copper length: %s\n",
-+ sfp_link_len(len, sizeof(len),
-+ sfp->id.base.link_len[4], 1));
-+ }
-+
-+ dev_info(sfp->dev, " Options: %s\n",
-+ sfp_bitfield(options, sizeof(options), sfp_options,
-+ be16_to_cpu(sfp->id.ext.options)));
-+ dev_info(sfp->dev, " Diagnostics: %s\n",
-+ sfp_bitfield(options, sizeof(options), diagmon,
-+ sfp->id.ext.diagmon));
-
- /* We only support SFP modules, not the legacy GBIC modules. */
- if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP ||
diff --git a/target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch b/target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch
deleted file mode 100644
index 34a2d342db..0000000000
--- a/target/linux/mvebu/patches-4.14/403-net-mvneta-convert-to-phylink.patch
+++ /dev/null
@@ -1,979 +0,0 @@
-From 36f29e6cf8071fed3854d9825217ed2a3c83b990 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Wed, 16 Sep 2015 21:27:10 +0100
-Subject: net: mvneta: convert to phylink
-
-Convert mvneta to use phylink, which models the MAC to PHY link in
-a generic, reusable form.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
-- remove unused sync status
----
- drivers/net/ethernet/marvell/Kconfig | 2 +-
- drivers/net/ethernet/marvell/mvneta.c | 594 ++++++++++++++++++++--------------
- 2 files changed, 349 insertions(+), 247 deletions(-)
-
---- a/drivers/net/ethernet/marvell/Kconfig
-+++ b/drivers/net/ethernet/marvell/Kconfig
-@@ -60,7 +60,7 @@ config MVNETA
- depends on ARCH_MVEBU || COMPILE_TEST
- depends on HAS_DMA
- select MVMDIO
-- select FIXED_PHY
-+ select PHYLINK
- ---help---
- This driver supports the network interface units in the
- Marvell ARMADA XP, ARMADA 370, ARMADA 38x and
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -28,7 +28,7 @@
- #include <linux/of_mdio.h>
- #include <linux/of_net.h>
- #include <linux/phy.h>
--#include <linux/phy_fixed.h>
-+#include <linux/phylink.h>
- #include <linux/platform_device.h>
- #include <linux/skbuff.h>
- #include <net/hwbm.h>
-@@ -189,6 +189,7 @@
- #define MVNETA_GMAC_CTRL_0 0x2c00
- #define MVNETA_GMAC_MAX_RX_SIZE_SHIFT 2
- #define MVNETA_GMAC_MAX_RX_SIZE_MASK 0x7ffc
-+#define MVNETA_GMAC0_PORT_1000BASE_X BIT(1)
- #define MVNETA_GMAC0_PORT_ENABLE BIT(0)
- #define MVNETA_GMAC_CTRL_2 0x2c08
- #define MVNETA_GMAC2_INBAND_AN_ENABLE BIT(0)
-@@ -204,13 +205,19 @@
- #define MVNETA_GMAC_TX_FLOW_CTRL_ENABLE BIT(5)
- #define MVNETA_GMAC_RX_FLOW_CTRL_ACTIVE BIT(6)
- #define MVNETA_GMAC_TX_FLOW_CTRL_ACTIVE BIT(7)
-+#define MVNETA_GMAC_AN_COMPLETE BIT(11)
-+#define MVNETA_GMAC_SYNC_OK BIT(14)
- #define MVNETA_GMAC_AUTONEG_CONFIG 0x2c0c
- #define MVNETA_GMAC_FORCE_LINK_DOWN BIT(0)
- #define MVNETA_GMAC_FORCE_LINK_PASS BIT(1)
- #define MVNETA_GMAC_INBAND_AN_ENABLE BIT(2)
-+#define MVNETA_GMAC_AN_BYPASS_ENABLE BIT(3)
-+#define MVNETA_GMAC_INBAND_RESTART_AN BIT(4)
- #define MVNETA_GMAC_CONFIG_MII_SPEED BIT(5)
- #define MVNETA_GMAC_CONFIG_GMII_SPEED BIT(6)
- #define MVNETA_GMAC_AN_SPEED_EN BIT(7)
-+#define MVNETA_GMAC_CONFIG_FLOW_CTRL BIT(8)
-+#define MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL BIT(9)
- #define MVNETA_GMAC_AN_FLOW_CTRL_EN BIT(11)
- #define MVNETA_GMAC_CONFIG_FULL_DUPLEX BIT(12)
- #define MVNETA_GMAC_AN_DUPLEX_EN BIT(13)
-@@ -237,6 +244,12 @@
- #define MVNETA_TXQ_TOKEN_SIZE_REG(q) (0x3e40 + ((q) << 2))
- #define MVNETA_TXQ_TOKEN_SIZE_MAX 0x7fffffff
-
-+#define MVNETA_LPI_CTRL_0 0x2cc0
-+#define MVNETA_LPI_CTRL_1 0x2cc4
-+#define MVNETA_LPI_REQUEST_ENABLE BIT(0)
-+#define MVNETA_LPI_CTRL_2 0x2cc8
-+#define MVNETA_LPI_STATUS 0x2ccc
-+
- #define MVNETA_CAUSE_TXQ_SENT_DESC_ALL_MASK 0xff
-
- /* Descriptor ring Macros */
-@@ -313,6 +326,11 @@
- #define MVNETA_RX_GET_BM_POOL_ID(rxd) \
- (((rxd)->status & MVNETA_RXD_BM_POOL_MASK) >> MVNETA_RXD_BM_POOL_SHIFT)
-
-+enum {
-+ ETHTOOL_STAT_EEE_WAKEUP,
-+ ETHTOOL_MAX_STATS,
-+};
-+
- struct mvneta_statistic {
- unsigned short offset;
- unsigned short type;
-@@ -321,6 +339,7 @@ struct mvneta_statistic {
-
- #define T_REG_32 32
- #define T_REG_64 64
-+#define T_SW 1
-
- static const struct mvneta_statistic mvneta_statistics[] = {
- { 0x3000, T_REG_64, "good_octets_received", },
-@@ -355,6 +374,7 @@ static const struct mvneta_statistic mvn
- { 0x304c, T_REG_32, "broadcast_frames_sent", },
- { 0x3054, T_REG_32, "fc_sent", },
- { 0x300c, T_REG_32, "internal_mac_transmit_err", },
-+ { ETHTOOL_STAT_EEE_WAKEUP, T_SW, "eee_wakeup_errors", },
- };
-
- struct mvneta_pcpu_stats {
-@@ -407,20 +427,19 @@ struct mvneta_port {
- u16 tx_ring_size;
- u16 rx_ring_size;
-
-- struct mii_bus *mii_bus;
-- phy_interface_t phy_interface;
-- struct device_node *phy_node;
-- unsigned int link;
-- unsigned int duplex;
-- unsigned int speed;
-+ struct device_node *dn;
- unsigned int tx_csum_limit;
-- unsigned int use_inband_status:1;
-+ struct phylink *phylink;
-
- struct mvneta_bm *bm_priv;
- struct mvneta_bm_pool *pool_long;
- struct mvneta_bm_pool *pool_short;
- int bm_win_id;
-
-+ bool eee_enabled;
-+ bool eee_active;
-+ bool tx_lpi_enabled;
-+
- u64 ethtool_stats[ARRAY_SIZE(mvneta_statistics)];
-
- u32 indir[MVNETA_RSS_LU_TABLE_SIZE];
-@@ -1215,10 +1234,6 @@ static void mvneta_port_disable(struct m
- val &= ~MVNETA_GMAC0_PORT_ENABLE;
- mvreg_write(pp, MVNETA_GMAC_CTRL_0, val);
-
-- pp->link = 0;
-- pp->duplex = -1;
-- pp->speed = 0;
--
- udelay(200);
- }
-
-@@ -1278,44 +1293,6 @@ static void mvneta_set_other_mcast_table
- mvreg_write(pp, MVNETA_DA_FILT_OTH_MCAST + offset, val);
- }
-
--static void mvneta_set_autoneg(struct mvneta_port *pp, int enable)
--{
-- u32 val;
--
-- if (enable) {
-- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-- val &= ~(MVNETA_GMAC_FORCE_LINK_PASS |
-- MVNETA_GMAC_FORCE_LINK_DOWN |
-- MVNETA_GMAC_AN_FLOW_CTRL_EN);
-- val |= MVNETA_GMAC_INBAND_AN_ENABLE |
-- MVNETA_GMAC_AN_SPEED_EN |
-- MVNETA_GMAC_AN_DUPLEX_EN;
-- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
--
-- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
-- val |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
-- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
--
-- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-- val |= MVNETA_GMAC2_INBAND_AN_ENABLE;
-- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
-- } else {
-- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-- val &= ~(MVNETA_GMAC_INBAND_AN_ENABLE |
-- MVNETA_GMAC_AN_SPEED_EN |
-- MVNETA_GMAC_AN_DUPLEX_EN);
-- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
--
-- val = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
-- val &= ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
-- mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, val);
--
-- val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-- val &= ~MVNETA_GMAC2_INBAND_AN_ENABLE;
-- mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
-- }
--}
--
- static void mvneta_percpu_unmask_interrupt(void *arg)
- {
- struct mvneta_port *pp = arg;
-@@ -1468,7 +1445,6 @@ static void mvneta_defaults_set(struct m
- val &= ~MVNETA_PHY_POLLING_ENABLE;
- mvreg_write(pp, MVNETA_UNIT_CONTROL, val);
-
-- mvneta_set_autoneg(pp, pp->use_inband_status);
- mvneta_set_ucast_table(pp, -1);
- mvneta_set_special_mcast_table(pp, -1);
- mvneta_set_other_mcast_table(pp, -1);
-@@ -2693,26 +2669,11 @@ static irqreturn_t mvneta_percpu_isr(int
- return IRQ_HANDLED;
- }
-
--static int mvneta_fixed_link_update(struct mvneta_port *pp,
-- struct phy_device *phy)
-+static void mvneta_link_change(struct mvneta_port *pp)
- {
-- struct fixed_phy_status status;
-- struct fixed_phy_status changed = {};
- u32 gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
-
-- status.link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
-- if (gmac_stat & MVNETA_GMAC_SPEED_1000)
-- status.speed = SPEED_1000;
-- else if (gmac_stat & MVNETA_GMAC_SPEED_100)
-- status.speed = SPEED_100;
-- else
-- status.speed = SPEED_10;
-- status.duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
-- changed.link = 1;
-- changed.speed = 1;
-- changed.duplex = 1;
-- fixed_phy_update_state(phy, &status, &changed);
-- return 0;
-+ phylink_mac_change(pp->phylink, !!(gmac_stat & MVNETA_GMAC_LINK_UP));
- }
-
- /* NAPI handler
-@@ -2728,7 +2689,6 @@ static int mvneta_poll(struct napi_struc
- u32 cause_rx_tx;
- int rx_queue;
- struct mvneta_port *pp = netdev_priv(napi->dev);
-- struct net_device *ndev = pp->dev;
- struct mvneta_pcpu_port *port = this_cpu_ptr(pp->ports);
-
- if (!netif_running(pp->dev)) {
-@@ -2742,12 +2702,11 @@ static int mvneta_poll(struct napi_struc
- u32 cause_misc = mvreg_read(pp, MVNETA_INTR_MISC_CAUSE);
-
- mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
-- if (pp->use_inband_status && (cause_misc &
-- (MVNETA_CAUSE_PHY_STATUS_CHANGE |
-- MVNETA_CAUSE_LINK_CHANGE |
-- MVNETA_CAUSE_PSC_SYNC_CHANGE))) {
-- mvneta_fixed_link_update(pp, ndev->phydev);
-- }
-+
-+ if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
-+ MVNETA_CAUSE_LINK_CHANGE |
-+ MVNETA_CAUSE_PSC_SYNC_CHANGE))
-+ mvneta_link_change(pp);
- }
-
- /* Release Tx descriptors */
-@@ -3061,7 +3020,6 @@ static int mvneta_setup_txqs(struct mvne
- static void mvneta_start_dev(struct mvneta_port *pp)
- {
- int cpu;
-- struct net_device *ndev = pp->dev;
-
- mvneta_max_rx_size_set(pp, pp->pkt_size);
- mvneta_txq_max_tx_size_set(pp, pp->pkt_size);
-@@ -3089,16 +3047,15 @@ static void mvneta_start_dev(struct mvne
- MVNETA_CAUSE_LINK_CHANGE |
- MVNETA_CAUSE_PSC_SYNC_CHANGE);
-
-- phy_start(ndev->phydev);
-+ phylink_start(pp->phylink);
- netif_tx_start_all_queues(pp->dev);
- }
-
- static void mvneta_stop_dev(struct mvneta_port *pp)
- {
- unsigned int cpu;
-- struct net_device *ndev = pp->dev;
-
-- phy_stop(ndev->phydev);
-+ phylink_stop(pp->phylink);
-
- if (!pp->neta_armada3700) {
- for_each_online_cpu(cpu) {
-@@ -3251,103 +3208,232 @@ static int mvneta_set_mac_addr(struct ne
- return 0;
- }
-
--static void mvneta_adjust_link(struct net_device *ndev)
-+static void mvneta_validate(struct net_device *ndev, unsigned long *supported,
-+ struct phylink_link_state *state)
-+{
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
-+
-+ /* Allow all the expected bits */
-+ phylink_set(mask, Autoneg);
-+ phylink_set_port_modes(mask);
-+
-+ /* Asymmetric pause is unsupported */
-+ phylink_set(mask, Pause);
-+ /* Half-duplex at speeds higher than 100Mbit is unsupported */
-+ phylink_set(mask, 1000baseT_Full);
-+ phylink_set(mask, 1000baseX_Full);
-+
-+ if (state->interface != PHY_INTERFACE_MODE_1000BASEX) {
-+ /* 10M and 100M are only supported in non-802.3z mode */
-+ phylink_set(mask, 10baseT_Half);
-+ phylink_set(mask, 10baseT_Full);
-+ phylink_set(mask, 100baseT_Half);
-+ phylink_set(mask, 100baseT_Full);
-+ }
-+
-+ bitmap_and(supported, supported, mask,
-+ __ETHTOOL_LINK_MODE_MASK_NBITS);
-+ bitmap_and(state->advertising, state->advertising, mask,
-+ __ETHTOOL_LINK_MODE_MASK_NBITS);
-+}
-+
-+static int mvneta_mac_link_state(struct net_device *ndev,
-+ struct phylink_link_state *state)
- {
- struct mvneta_port *pp = netdev_priv(ndev);
-- struct phy_device *phydev = ndev->phydev;
-- int status_change = 0;
-+ u32 gmac_stat;
-
-- if (phydev->link) {
-- if ((pp->speed != phydev->speed) ||
-- (pp->duplex != phydev->duplex)) {
-- u32 val;
--
-- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
-- MVNETA_GMAC_CONFIG_GMII_SPEED |
-- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
--
-- if (phydev->duplex)
-- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
--
-- if (phydev->speed == SPEED_1000)
-- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
-- else if (phydev->speed == SPEED_100)
-- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
-+ gmac_stat = mvreg_read(pp, MVNETA_GMAC_STATUS);
-
-- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-+ if (gmac_stat & MVNETA_GMAC_SPEED_1000)
-+ state->speed = SPEED_1000;
-+ else if (gmac_stat & MVNETA_GMAC_SPEED_100)
-+ state->speed = SPEED_100;
-+ else
-+ state->speed = SPEED_10;
-
-- pp->duplex = phydev->duplex;
-- pp->speed = phydev->speed;
-- }
-+ state->an_complete = !!(gmac_stat & MVNETA_GMAC_AN_COMPLETE);
-+ state->link = !!(gmac_stat & MVNETA_GMAC_LINK_UP);
-+ state->duplex = !!(gmac_stat & MVNETA_GMAC_FULL_DUPLEX);
-+
-+ state->pause = 0;
-+ if (gmac_stat & MVNETA_GMAC_RX_FLOW_CTRL_ENABLE)
-+ state->pause |= MLO_PAUSE_RX;
-+ if (gmac_stat & MVNETA_GMAC_TX_FLOW_CTRL_ENABLE)
-+ state->pause |= MLO_PAUSE_TX;
-+
-+ return 1;
-+}
-+
-+static void mvneta_mac_an_restart(struct net_device *ndev)
-+{
-+ struct mvneta_port *pp = netdev_priv(ndev);
-+ u32 gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-+
-+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
-+ gmac_an | MVNETA_GMAC_INBAND_RESTART_AN);
-+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
-+ gmac_an & ~MVNETA_GMAC_INBAND_RESTART_AN);
-+}
-+
-+static void mvneta_mac_config(struct net_device *ndev, unsigned int mode,
-+ const struct phylink_link_state *state)
-+{
-+ struct mvneta_port *pp = netdev_priv(ndev);
-+ u32 new_ctrl0, gmac_ctrl0 = mvreg_read(pp, MVNETA_GMAC_CTRL_0);
-+ u32 new_ctrl2, gmac_ctrl2 = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-+ u32 new_clk, gmac_clk = mvreg_read(pp, MVNETA_GMAC_CLOCK_DIVIDER);
-+ u32 new_an, gmac_an = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-+
-+ new_ctrl0 = gmac_ctrl0 & ~MVNETA_GMAC0_PORT_1000BASE_X;
-+ new_ctrl2 = gmac_ctrl2 & ~MVNETA_GMAC2_INBAND_AN_ENABLE;
-+ new_clk = gmac_clk & ~MVNETA_GMAC_1MS_CLOCK_ENABLE;
-+ new_an = gmac_an & ~(MVNETA_GMAC_INBAND_AN_ENABLE |
-+ MVNETA_GMAC_INBAND_RESTART_AN |
-+ MVNETA_GMAC_CONFIG_MII_SPEED |
-+ MVNETA_GMAC_CONFIG_GMII_SPEED |
-+ MVNETA_GMAC_AN_SPEED_EN |
-+ MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL |
-+ MVNETA_GMAC_CONFIG_FLOW_CTRL |
-+ MVNETA_GMAC_AN_FLOW_CTRL_EN |
-+ MVNETA_GMAC_CONFIG_FULL_DUPLEX |
-+ MVNETA_GMAC_AN_DUPLEX_EN);
-+
-+ if (phylink_test(state->advertising, Pause))
-+ new_an |= MVNETA_GMAC_ADVERT_SYM_FLOW_CTRL;
-+ if (state->pause & MLO_PAUSE_TXRX_MASK)
-+ new_an |= MVNETA_GMAC_CONFIG_FLOW_CTRL;
-+
-+ if (!phylink_autoneg_inband(mode)) {
-+ /* Phy or fixed speed */
-+ if (state->duplex)
-+ new_an |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-+
-+ if (state->speed == SPEED_1000)
-+ new_an |= MVNETA_GMAC_CONFIG_GMII_SPEED;
-+ else if (state->speed == SPEED_100)
-+ new_an |= MVNETA_GMAC_CONFIG_MII_SPEED;
-+ } else if (state->interface == PHY_INTERFACE_MODE_SGMII) {
-+ /* SGMII mode receives the state from the PHY */
-+ new_ctrl2 |= MVNETA_GMAC2_INBAND_AN_ENABLE;
-+ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
-+ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
-+ MVNETA_GMAC_FORCE_LINK_PASS)) |
-+ MVNETA_GMAC_INBAND_AN_ENABLE |
-+ MVNETA_GMAC_AN_SPEED_EN |
-+ MVNETA_GMAC_AN_DUPLEX_EN;
-+ } else {
-+ /* 802.3z negotiation - only 1000base-X */
-+ new_ctrl0 |= MVNETA_GMAC0_PORT_1000BASE_X;
-+ new_clk |= MVNETA_GMAC_1MS_CLOCK_ENABLE;
-+ new_an = (new_an & ~(MVNETA_GMAC_FORCE_LINK_DOWN |
-+ MVNETA_GMAC_FORCE_LINK_PASS)) |
-+ MVNETA_GMAC_INBAND_AN_ENABLE |
-+ MVNETA_GMAC_CONFIG_GMII_SPEED |
-+ /* The MAC only supports FD mode */
-+ MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-+
-+ if (state->pause & MLO_PAUSE_AN && state->an_enabled)
-+ new_an |= MVNETA_GMAC_AN_FLOW_CTRL_EN;
-+ }
-+
-+ /* Armada 370 documentation says we can only change the port mode
-+ * and in-band enable when the link is down, so force it down
-+ * while making these changes. We also do this for GMAC_CTRL2 */
-+ if ((new_ctrl0 ^ gmac_ctrl0) & MVNETA_GMAC0_PORT_1000BASE_X ||
-+ (new_ctrl2 ^ gmac_ctrl2) & MVNETA_GMAC2_INBAND_AN_ENABLE ||
-+ (new_an ^ gmac_an) & MVNETA_GMAC_INBAND_AN_ENABLE) {
-+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
-+ (gmac_an & ~MVNETA_GMAC_FORCE_LINK_PASS) |
-+ MVNETA_GMAC_FORCE_LINK_DOWN);
-+ }
-+
-+ if (new_ctrl0 != gmac_ctrl0)
-+ mvreg_write(pp, MVNETA_GMAC_CTRL_0, new_ctrl0);
-+ if (new_ctrl2 != gmac_ctrl2)
-+ mvreg_write(pp, MVNETA_GMAC_CTRL_2, new_ctrl2);
-+ if (new_clk != gmac_clk)
-+ mvreg_write(pp, MVNETA_GMAC_CLOCK_DIVIDER, new_clk);
-+ if (new_an != gmac_an)
-+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, new_an);
-+}
-+
-+static void mvneta_set_eee(struct mvneta_port *pp, bool enable)
-+{
-+ u32 lpi_ctl1;
-+
-+ lpi_ctl1 = mvreg_read(pp, MVNETA_LPI_CTRL_1);
-+ if (enable)
-+ lpi_ctl1 |= MVNETA_LPI_REQUEST_ENABLE;
-+ else
-+ lpi_ctl1 &= ~MVNETA_LPI_REQUEST_ENABLE;
-+ mvreg_write(pp, MVNETA_LPI_CTRL_1, lpi_ctl1);
-+}
-+
-+static void mvneta_mac_link_down(struct net_device *ndev, unsigned int mode)
-+{
-+ struct mvneta_port *pp = netdev_priv(ndev);
-+ u32 val;
-+
-+ mvneta_port_down(pp);
-+
-+ if (!phylink_autoneg_inband(mode)) {
-+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-+ val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
-+ val |= MVNETA_GMAC_FORCE_LINK_DOWN;
-+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- }
-
-- if (phydev->link != pp->link) {
-- if (!phydev->link) {
-- pp->duplex = -1;
-- pp->speed = 0;
-- }
-+ pp->eee_active = false;
-+ mvneta_set_eee(pp, false);
-+}
-+
-+static void mvneta_mac_link_up(struct net_device *ndev, unsigned int mode,
-+ struct phy_device *phy)
-+{
-+ struct mvneta_port *pp = netdev_priv(ndev);
-+ u32 val;
-
-- pp->link = phydev->link;
-- status_change = 1;
-+ if (!phylink_autoneg_inband(mode)) {
-+ val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-+ val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
-+ val |= MVNETA_GMAC_FORCE_LINK_PASS;
-+ mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
- }
-
-- if (status_change) {
-- if (phydev->link) {
-- if (!pp->use_inband_status) {
-- u32 val = mvreg_read(pp,
-- MVNETA_GMAC_AUTONEG_CONFIG);
-- val &= ~MVNETA_GMAC_FORCE_LINK_DOWN;
-- val |= MVNETA_GMAC_FORCE_LINK_PASS;
-- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
-- val);
-- }
-- mvneta_port_up(pp);
-- } else {
-- if (!pp->use_inband_status) {
-- u32 val = mvreg_read(pp,
-- MVNETA_GMAC_AUTONEG_CONFIG);
-- val &= ~MVNETA_GMAC_FORCE_LINK_PASS;
-- val |= MVNETA_GMAC_FORCE_LINK_DOWN;
-- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG,
-- val);
-- }
-- mvneta_port_down(pp);
-- }
-- phy_print_status(phydev);
-+ mvneta_port_up(pp);
-+
-+ if (phy && pp->eee_enabled) {
-+ pp->eee_active = phy_init_eee(phy, 0) >= 0;
-+ mvneta_set_eee(pp, pp->eee_active && pp->tx_lpi_enabled);
- }
- }
-
-+static const struct phylink_mac_ops mvneta_phylink_ops = {
-+ .validate = mvneta_validate,
-+ .mac_link_state = mvneta_mac_link_state,
-+ .mac_an_restart = mvneta_mac_an_restart,
-+ .mac_config = mvneta_mac_config,
-+ .mac_link_down = mvneta_mac_link_down,
-+ .mac_link_up = mvneta_mac_link_up,
-+};
-+
- static int mvneta_mdio_probe(struct mvneta_port *pp)
- {
-- struct phy_device *phy_dev;
- struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
-+ int err = phylink_of_phy_connect(pp->phylink, pp->dn);
-+ if (err)
-+ netdev_err(pp->dev, "could not attach PHY\n");
-
-- phy_dev = of_phy_connect(pp->dev, pp->phy_node, mvneta_adjust_link, 0,
-- pp->phy_interface);
-- if (!phy_dev) {
-- netdev_err(pp->dev, "could not find the PHY\n");
-- return -ENODEV;
-- }
--
-- phy_ethtool_get_wol(phy_dev, &wol);
-+ phylink_ethtool_get_wol(pp->phylink, &wol);
- device_set_wakeup_capable(&pp->dev->dev, !!wol.supported);
-
-- phy_dev->supported &= PHY_GBIT_FEATURES;
-- phy_dev->advertising = phy_dev->supported;
--
-- pp->link = 0;
-- pp->duplex = 0;
-- pp->speed = 0;
--
-- return 0;
-+ return err;
- }
-
- static void mvneta_mdio_remove(struct mvneta_port *pp)
- {
-- struct net_device *ndev = pp->dev;
--
-- phy_disconnect(ndev->phydev);
-+ phylink_disconnect_phy(pp->phylink);
- }
-
- /* Electing a CPU must be done in an atomic way: it should be done
-@@ -3626,10 +3712,9 @@ static int mvneta_stop(struct net_device
-
- static int mvneta_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
- {
-- if (!dev->phydev)
-- return -ENOTSUPP;
-+ struct mvneta_port *pp = netdev_priv(dev);
-
-- return phy_mii_ioctl(dev->phydev, ifr, cmd);
-+ return phylink_mii_ioctl(pp->phylink, ifr, cmd);
- }
-
- /* Ethtool methods */
-@@ -3640,44 +3725,25 @@ mvneta_ethtool_set_link_ksettings(struct
- const struct ethtool_link_ksettings *cmd)
- {
- struct mvneta_port *pp = netdev_priv(ndev);
-- struct phy_device *phydev = ndev->phydev;
-
-- if (!phydev)
-- return -ENODEV;
--
-- if ((cmd->base.autoneg == AUTONEG_ENABLE) != pp->use_inband_status) {
-- u32 val;
--
-- mvneta_set_autoneg(pp, cmd->base.autoneg == AUTONEG_ENABLE);
--
-- if (cmd->base.autoneg == AUTONEG_DISABLE) {
-- val = mvreg_read(pp, MVNETA_GMAC_AUTONEG_CONFIG);
-- val &= ~(MVNETA_GMAC_CONFIG_MII_SPEED |
-- MVNETA_GMAC_CONFIG_GMII_SPEED |
-- MVNETA_GMAC_CONFIG_FULL_DUPLEX);
--
-- if (phydev->duplex)
-- val |= MVNETA_GMAC_CONFIG_FULL_DUPLEX;
-+ return phylink_ethtool_ksettings_set(pp->phylink, cmd);
-+}
-
-- if (phydev->speed == SPEED_1000)
-- val |= MVNETA_GMAC_CONFIG_GMII_SPEED;
-- else if (phydev->speed == SPEED_100)
-- val |= MVNETA_GMAC_CONFIG_MII_SPEED;
-+/* Get link ksettings for ethtools */
-+static int
-+mvneta_ethtool_get_link_ksettings(struct net_device *ndev,
-+ struct ethtool_link_ksettings *cmd)
-+{
-+ struct mvneta_port *pp = netdev_priv(ndev);
-
-- mvreg_write(pp, MVNETA_GMAC_AUTONEG_CONFIG, val);
-- }
-+ return phylink_ethtool_ksettings_get(pp->phylink, cmd);
-+}
-
-- pp->use_inband_status = (cmd->base.autoneg == AUTONEG_ENABLE);
-- netdev_info(pp->dev, "autoneg status set to %i\n",
-- pp->use_inband_status);
--
-- if (netif_running(ndev)) {
-- mvneta_port_down(pp);
-- mvneta_port_up(pp);
-- }
-- }
-+static int mvneta_ethtool_nway_reset(struct net_device *dev)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-
-- return phy_ethtool_ksettings_set(ndev->phydev, cmd);
-+ return phylink_ethtool_nway_reset(pp->phylink);
- }
-
- /* Set interrupt coalescing for ethtools */
-@@ -3769,6 +3835,22 @@ static int mvneta_ethtool_set_ringparam(
- return 0;
- }
-
-+static void mvneta_ethtool_get_pauseparam(struct net_device *dev,
-+ struct ethtool_pauseparam *pause)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+
-+ phylink_ethtool_get_pauseparam(pp->phylink, pause);
-+}
-+
-+static int mvneta_ethtool_set_pauseparam(struct net_device *dev,
-+ struct ethtool_pauseparam *pause)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+
-+ return phylink_ethtool_set_pauseparam(pp->phylink, pause);
-+}
-+
- static void mvneta_ethtool_get_strings(struct net_device *netdev, u32 sset,
- u8 *data)
- {
-@@ -3785,26 +3867,35 @@ static void mvneta_ethtool_update_stats(
- {
- const struct mvneta_statistic *s;
- void __iomem *base = pp->base;
-- u32 high, low, val;
-- u64 val64;
-+ u32 high, low;
-+ u64 val;
- int i;
-
- for (i = 0, s = mvneta_statistics;
- s < mvneta_statistics + ARRAY_SIZE(mvneta_statistics);
- s++, i++) {
-+ val = 0;
-+
- switch (s->type) {
- case T_REG_32:
- val = readl_relaxed(base + s->offset);
-- pp->ethtool_stats[i] += val;
- break;
- case T_REG_64:
- /* Docs say to read low 32-bit then high */
- low = readl_relaxed(base + s->offset);
- high = readl_relaxed(base + s->offset + 4);
-- val64 = (u64)high << 32 | low;
-- pp->ethtool_stats[i] += val64;
-+ val = (u64)high << 32 | low;
-+ break;
-+ case T_SW:
-+ switch (s->offset) {
-+ case ETHTOOL_STAT_EEE_WAKEUP:
-+ val = phylink_get_eee_err(pp->phylink);
-+ break;
-+ }
- break;
- }
-+
-+ pp->ethtool_stats[i] += val;
- }
- }
-
-@@ -3939,28 +4030,65 @@ static int mvneta_ethtool_get_rxfh(struc
- static void mvneta_ethtool_get_wol(struct net_device *dev,
- struct ethtool_wolinfo *wol)
- {
-- wol->supported = 0;
-- wol->wolopts = 0;
-+ struct mvneta_port *pp = netdev_priv(dev);
-
-- if (dev->phydev)
-- phy_ethtool_get_wol(dev->phydev, wol);
-+ phylink_ethtool_get_wol(pp->phylink, wol);
- }
-
- static int mvneta_ethtool_set_wol(struct net_device *dev,
- struct ethtool_wolinfo *wol)
- {
-+ struct mvneta_port *pp = netdev_priv(dev);
- int ret;
-
-- if (!dev->phydev)
-- return -EOPNOTSUPP;
--
-- ret = phy_ethtool_set_wol(dev->phydev, wol);
-+ ret = phylink_ethtool_set_wol(pp->phylink, wol);
- if (!ret)
- device_set_wakeup_enable(&dev->dev, !!wol->wolopts);
-
- return ret;
- }
-
-+static int mvneta_ethtool_get_eee(struct net_device *dev,
-+ struct ethtool_eee *eee)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+ u32 lpi_ctl0;
-+
-+ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
-+
-+ eee->eee_enabled = pp->eee_enabled;
-+ eee->eee_active = pp->eee_active;
-+ eee->tx_lpi_enabled = pp->tx_lpi_enabled;
-+ eee->tx_lpi_timer = (lpi_ctl0) >> 8; // * scale;
-+
-+ return phylink_ethtool_get_eee(pp->phylink, eee);
-+}
-+
-+static int mvneta_ethtool_set_eee(struct net_device *dev,
-+ struct ethtool_eee *eee)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+ u32 lpi_ctl0;
-+
-+ /* The Armada 37x documents do not give limits for this other than
-+ * it being an 8-bit register. */
-+ if (eee->tx_lpi_enabled &&
-+ (eee->tx_lpi_timer < 0 || eee->tx_lpi_timer > 255))
-+ return -EINVAL;
-+
-+ lpi_ctl0 = mvreg_read(pp, MVNETA_LPI_CTRL_0);
-+ lpi_ctl0 &= ~(0xff << 8);
-+ lpi_ctl0 |= eee->tx_lpi_timer << 8;
-+ mvreg_write(pp, MVNETA_LPI_CTRL_0, lpi_ctl0);
-+
-+ pp->eee_enabled = eee->eee_enabled;
-+ pp->tx_lpi_enabled = eee->tx_lpi_enabled;
-+
-+ mvneta_set_eee(pp, eee->tx_lpi_enabled && eee->eee_enabled);
-+
-+ return phylink_ethtool_set_eee(pp->phylink, eee);
-+}
-+
- static u16 mvneta_select_queue(struct net_device *dev, struct sk_buff *skb,
- void *accel_priv,
- select_queue_fallback_t fallback)
-@@ -3984,13 +4112,15 @@ static const struct net_device_ops mvnet
- };
-
- static const struct ethtool_ops mvneta_eth_tool_ops = {
-- .nway_reset = phy_ethtool_nway_reset,
-+ .nway_reset = mvneta_ethtool_nway_reset,
- .get_link = ethtool_op_get_link,
- .set_coalesce = mvneta_ethtool_set_coalesce,
- .get_coalesce = mvneta_ethtool_get_coalesce,
- .get_drvinfo = mvneta_ethtool_get_drvinfo,
- .get_ringparam = mvneta_ethtool_get_ringparam,
- .set_ringparam = mvneta_ethtool_set_ringparam,
-+ .get_pauseparam = mvneta_ethtool_get_pauseparam,
-+ .set_pauseparam = mvneta_ethtool_set_pauseparam,
- .get_strings = mvneta_ethtool_get_strings,
- .get_ethtool_stats = mvneta_ethtool_get_stats,
- .get_sset_count = mvneta_ethtool_get_sset_count,
-@@ -3998,10 +4128,12 @@ static const struct ethtool_ops mvneta_e
- .get_rxnfc = mvneta_ethtool_get_rxnfc,
- .get_rxfh = mvneta_ethtool_get_rxfh,
- .set_rxfh = mvneta_ethtool_set_rxfh,
-- .get_link_ksettings = phy_ethtool_get_link_ksettings,
-+ .get_link_ksettings = mvneta_ethtool_get_link_ksettings,
- .set_link_ksettings = mvneta_ethtool_set_link_ksettings,
- .get_wol = mvneta_ethtool_get_wol,
- .set_wol = mvneta_ethtool_set_wol,
-+ .get_eee = mvneta_ethtool_get_eee,
-+ .set_eee = mvneta_ethtool_set_eee,
- };
-
- /* Initialize hw */
-@@ -4146,14 +4278,13 @@ static int mvneta_probe(struct platform_
- {
- struct resource *res;
- struct device_node *dn = pdev->dev.of_node;
-- struct device_node *phy_node;
- struct device_node *bm_node;
- struct mvneta_port *pp;
- struct net_device *dev;
-+ struct phylink *phylink;
- const char *dt_mac_addr;
- char hw_mac_addr[ETH_ALEN];
- const char *mac_from;
-- const char *managed;
- int tx_csum_limit;
- int phy_mode;
- int err;
-@@ -4169,31 +4300,11 @@ static int mvneta_probe(struct platform_
- goto err_free_netdev;
- }
-
-- phy_node = of_parse_phandle(dn, "phy", 0);
-- if (!phy_node) {
-- if (!of_phy_is_fixed_link(dn)) {
-- dev_err(&pdev->dev, "no PHY specified\n");
-- err = -ENODEV;
-- goto err_free_irq;
-- }
--
-- err = of_phy_register_fixed_link(dn);
-- if (err < 0) {
-- dev_err(&pdev->dev, "cannot register fixed PHY\n");
-- goto err_free_irq;
-- }
--
-- /* In the case of a fixed PHY, the DT node associated
-- * to the PHY is the Ethernet MAC DT node.
-- */
-- phy_node = of_node_get(dn);
-- }
--
- phy_mode = of_get_phy_mode(dn);
- if (phy_mode < 0) {
- dev_err(&pdev->dev, "incorrect phy-mode\n");
- err = -EINVAL;
-- goto err_put_phy_node;
-+ goto err_free_irq;
- }
-
- dev->tx_queue_len = MVNETA_MAX_TXD;
-@@ -4204,12 +4315,7 @@ static int mvneta_probe(struct platform_
-
- pp = netdev_priv(dev);
- spin_lock_init(&pp->lock);
-- pp->phy_node = phy_node;
-- pp->phy_interface = phy_mode;
--
-- err = of_property_read_string(dn, "managed", &managed);
-- pp->use_inband_status = (err == 0 &&
-- strcmp(managed, "in-band-status") == 0);
-+ pp->dn = dn;
-
- pp->rxq_def = rxq_def;
-
-@@ -4231,7 +4337,7 @@ static int mvneta_probe(struct platform_
- pp->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(pp->clk)) {
- err = PTR_ERR(pp->clk);
-- goto err_put_phy_node;
-+ goto err_free_irq;
- }
-
- clk_prepare_enable(pp->clk);
-@@ -4357,6 +4463,14 @@ static int mvneta_probe(struct platform_
- /* 9676 == 9700 - 20 and rounding to 8 */
- dev->max_mtu = 9676;
-
-+ phylink = phylink_create(dev, dn, phy_mode, &mvneta_phylink_ops);
-+ if (IS_ERR(phylink)) {
-+ err = PTR_ERR(phylink);
-+ goto err_netdev;
-+ }
-+
-+ pp->phylink = phylink;
-+
- err = register_netdev(dev);
- if (err < 0) {
- dev_err(&pdev->dev, "failed to register\n");
-@@ -4368,14 +4482,6 @@ static int mvneta_probe(struct platform_
-
- platform_set_drvdata(pdev, pp->dev);
-
-- if (pp->use_inband_status) {
-- struct phy_device *phy = of_phy_find_device(dn);
--
-- mvneta_fixed_link_update(pp, phy);
--
-- put_device(&phy->mdio.dev);
-- }
--
- return 0;
-
- err_netdev:
-@@ -4384,16 +4490,14 @@ err_netdev:
- mvneta_bm_pool_destroy(pp->bm_priv, pp->pool_short,
- 1 << pp->id);
- }
-+ if (pp->phylink)
-+ phylink_destroy(pp->phylink);
- free_percpu(pp->stats);
- err_free_ports:
- free_percpu(pp->ports);
- err_clk:
- clk_disable_unprepare(pp->clk_bus);
- clk_disable_unprepare(pp->clk);
--err_put_phy_node:
-- of_node_put(phy_node);
-- if (of_phy_is_fixed_link(dn))
-- of_phy_deregister_fixed_link(dn);
- err_free_irq:
- irq_dispose_mapping(dev->irq);
- err_free_netdev:
-@@ -4405,7 +4509,6 @@ err_free_netdev:
- static int mvneta_remove(struct platform_device *pdev)
- {
- struct net_device *dev = platform_get_drvdata(pdev);
-- struct device_node *dn = pdev->dev.of_node;
- struct mvneta_port *pp = netdev_priv(dev);
-
- unregister_netdev(dev);
-@@ -4413,10 +4516,8 @@ static int mvneta_remove(struct platform
- clk_disable_unprepare(pp->clk);
- free_percpu(pp->ports);
- free_percpu(pp->stats);
-- if (of_phy_is_fixed_link(dn))
-- of_phy_deregister_fixed_link(dn);
- irq_dispose_mapping(dev->irq);
-- of_node_put(pp->phy_node);
-+ phylink_destroy(pp->phylink);
- free_netdev(dev);
-
- if (pp->bm_priv) {
-@@ -4468,9 +4569,6 @@ static int mvneta_resume(struct device *
- return err;
- }
-
-- if (pp->use_inband_status)
-- mvneta_fixed_link_update(pp, dev->phydev);
--
- netif_device_attach(dev);
- if (netif_running(dev)) {
- mvneta_open(dev);
diff --git a/target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch b/target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch
deleted file mode 100644
index 906c163ac9..0000000000
--- a/target/linux/mvebu/patches-4.14/404-net-mvneta-hack-fix-phy_interface.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From acdfcc7ef78c46baca1439a1cac5b73008abc672 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 16 May 2017 11:55:58 +0100
-Subject: net: mvneta: hack fix phy_interface
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/ethernet/marvell/mvneta.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -427,6 +427,7 @@ struct mvneta_port {
- u16 tx_ring_size;
- u16 rx_ring_size;
-
-+ phy_interface_t phy_interface;
- struct device_node *dn;
- unsigned int tx_csum_limit;
- struct phylink *phylink;
-@@ -4315,6 +4316,7 @@ static int mvneta_probe(struct platform_
-
- pp = netdev_priv(dev);
- spin_lock_init(&pp->lock);
-+ pp->phy_interface = phy_mode;
- pp->dn = dn;
-
- pp->rxq_def = rxq_def;
diff --git a/target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch b/target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch
deleted file mode 100644
index 7d02b0a93b..0000000000
--- a/target/linux/mvebu/patches-4.14/405-net-mvneta-disable-MVNETA_CAUSE_PSC_SYNC_CHANGE-inte.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From fde9e742a47606110232b7464608b6f9c0510938 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Sat, 24 Dec 2016 10:27:08 +0000
-Subject: net: mvneta: disable MVNETA_CAUSE_PSC_SYNC_CHANGE interrupt
-
-The PSC sync change interrupt can fire multiple times while the link is
-down. As this isn't information we make use of, it's pointless having
-the interrupt enabled, so let's disable this interrupt.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/ethernet/marvell/mvneta.c | 12 ++++--------
- 1 file changed, 4 insertions(+), 8 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -2705,8 +2705,7 @@ static int mvneta_poll(struct napi_struc
- mvreg_write(pp, MVNETA_INTR_MISC_CAUSE, 0);
-
- if (cause_misc & (MVNETA_CAUSE_PHY_STATUS_CHANGE |
-- MVNETA_CAUSE_LINK_CHANGE |
-- MVNETA_CAUSE_PSC_SYNC_CHANGE))
-+ MVNETA_CAUSE_LINK_CHANGE))
- mvneta_link_change(pp);
- }
-
-@@ -3045,8 +3044,7 @@ static void mvneta_start_dev(struct mvne
-
- mvreg_write(pp, MVNETA_INTR_MISC_MASK,
- MVNETA_CAUSE_PHY_STATUS_CHANGE |
-- MVNETA_CAUSE_LINK_CHANGE |
-- MVNETA_CAUSE_PSC_SYNC_CHANGE);
-+ MVNETA_CAUSE_LINK_CHANGE);
-
- phylink_start(pp->phylink);
- netif_tx_start_all_queues(pp->dev);
-@@ -3542,8 +3540,7 @@ static int mvneta_cpu_online(unsigned in
- on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
- mvreg_write(pp, MVNETA_INTR_MISC_MASK,
- MVNETA_CAUSE_PHY_STATUS_CHANGE |
-- MVNETA_CAUSE_LINK_CHANGE |
-- MVNETA_CAUSE_PSC_SYNC_CHANGE);
-+ MVNETA_CAUSE_LINK_CHANGE);
- netif_tx_start_all_queues(pp->dev);
- spin_unlock(&pp->lock);
- return 0;
-@@ -3584,8 +3581,7 @@ static int mvneta_cpu_dead(unsigned int
- on_each_cpu(mvneta_percpu_unmask_interrupt, pp, true);
- mvreg_write(pp, MVNETA_INTR_MISC_MASK,
- MVNETA_CAUSE_PHY_STATUS_CHANGE |
-- MVNETA_CAUSE_LINK_CHANGE |
-- MVNETA_CAUSE_PSC_SYNC_CHANGE);
-+ MVNETA_CAUSE_LINK_CHANGE);
- netif_tx_start_all_queues(pp->dev);
- return 0;
- }
diff --git a/target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch b/target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch
deleted file mode 100644
index 39eb33ac2c..0000000000
--- a/target/linux/mvebu/patches-4.14/406-net-mvneta-add-module-EEPROM-reading-support.patch
+++ /dev/null
@@ -1,44 +0,0 @@
-From 2ff039aa4462c2104c210b7cf39691c612de8214 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Thu, 1 Oct 2015 23:32:39 +0100
-Subject: net: mvneta: add module EEPROM reading support
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/net/ethernet/marvell/mvneta.c | 18 ++++++++++++++++++
- 1 file changed, 18 insertions(+)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4045,6 +4045,22 @@ static int mvneta_ethtool_set_wol(struct
- return ret;
- }
-
-+static int mvneta_ethtool_get_module_info(struct net_device *dev,
-+ struct ethtool_modinfo *modinfo)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+
-+ return phylink_ethtool_get_module_info(pp->phylink, modinfo);
-+}
-+
-+static int mvneta_ethtool_get_module_eeprom(struct net_device *dev,
-+ struct ethtool_eeprom *ee, u8 *buf)
-+{
-+ struct mvneta_port *pp = netdev_priv(dev);
-+
-+ return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf);
-+}
-+
- static int mvneta_ethtool_get_eee(struct net_device *dev,
- struct ethtool_eee *eee)
- {
-@@ -4129,6 +4145,8 @@ static const struct ethtool_ops mvneta_e
- .set_link_ksettings = mvneta_ethtool_set_link_ksettings,
- .get_wol = mvneta_ethtool_get_wol,
- .set_wol = mvneta_ethtool_set_wol,
-+ .get_module_info = mvneta_ethtool_get_module_info,
-+ .get_module_eeprom = mvneta_ethtool_get_module_eeprom,
- .get_eee = mvneta_ethtool_get_eee,
- .set_eee = mvneta_ethtool_set_eee,
- };
diff --git a/target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch b/target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch
deleted file mode 100644
index 71c2f45555..0000000000
--- a/target/linux/mvebu/patches-4.14/407-phy-fixed-phy-remove-fixed_phy_update_state.patch
+++ /dev/null
@@ -1,80 +0,0 @@
-From 774ce2eda0a929f79ee398ba6d2d13fd406f31c4 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Fri, 2 Oct 2015 22:46:54 +0100
-Subject: phy: fixed-phy: remove fixed_phy_update_state()
-
-mvneta is the only user of fixed_phy_update_state(), which has been
-converted to use phylink instead. Remove fixed_phy_update_state().
-
-Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- drivers/net/phy/fixed_phy.c | 31 -------------------------------
- include/linux/phy_fixed.h | 9 ---------
- 2 files changed, 40 deletions(-)
-
---- a/drivers/net/phy/fixed_phy.c
-+++ b/drivers/net/phy/fixed_phy.c
-@@ -115,37 +115,6 @@ int fixed_phy_set_link_update(struct phy
- }
- EXPORT_SYMBOL_GPL(fixed_phy_set_link_update);
-
--int fixed_phy_update_state(struct phy_device *phydev,
-- const struct fixed_phy_status *status,
-- const struct fixed_phy_status *changed)
--{
-- struct fixed_mdio_bus *fmb = &platform_fmb;
-- struct fixed_phy *fp;
--
-- if (!phydev || phydev->mdio.bus != fmb->mii_bus)
-- return -EINVAL;
--
-- list_for_each_entry(fp, &fmb->phys, node) {
-- if (fp->addr == phydev->mdio.addr) {
-- write_seqcount_begin(&fp->seqcount);
--#define _UPD(x) if (changed->x) \
-- fp->status.x = status->x
-- _UPD(link);
-- _UPD(speed);
-- _UPD(duplex);
-- _UPD(pause);
-- _UPD(asym_pause);
--#undef _UPD
-- fixed_phy_update(fp);
-- write_seqcount_end(&fp->seqcount);
-- return 0;
-- }
-- }
--
-- return -ENOENT;
--}
--EXPORT_SYMBOL(fixed_phy_update_state);
--
- int fixed_phy_add(unsigned int irq, int phy_addr,
- struct fixed_phy_status *status,
- int link_gpio)
---- a/include/linux/phy_fixed.h
-+++ b/include/linux/phy_fixed.h
-@@ -24,9 +24,6 @@ extern void fixed_phy_unregister(struct
- extern int fixed_phy_set_link_update(struct phy_device *phydev,
- int (*link_update)(struct net_device *,
- struct fixed_phy_status *));
--extern int fixed_phy_update_state(struct phy_device *phydev,
-- const struct fixed_phy_status *status,
-- const struct fixed_phy_status *changed);
- #else
- static inline int fixed_phy_add(unsigned int irq, int phy_id,
- struct fixed_phy_status *status,
-@@ -50,12 +47,6 @@ static inline int fixed_phy_set_link_upd
- {
- return -ENODEV;
- }
--static inline int fixed_phy_update_state(struct phy_device *phydev,
-- const struct fixed_phy_status *status,
-- const struct fixed_phy_status *changed)
--{
-- return -ENODEV;
--}
- #endif /* CONFIG_FIXED_PHY */
-
- #endif /* __PHY_FIXED_H */
diff --git a/target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch b/target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch
deleted file mode 100644
index 19f8f1e632..0000000000
--- a/target/linux/mvebu/patches-4.14/408-sfp-move-module-eeprom-ethtool-access-into-netdev-co.patch
+++ /dev/null
@@ -1,181 +0,0 @@
-From c47beb7e3f8575dfd7d58240a72c4e4e66ce5449 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 15:26:32 +0100
-Subject: sfp: move module eeprom ethtool access into netdev core ethtool
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/ethernet/marvell/mvneta.c | 18 ------------------
- drivers/net/phy/phylink.c | 28 ----------------------------
- drivers/net/phy/sfp-bus.c | 6 ++----
- include/linux/netdevice.h | 2 ++
- include/linux/phylink.h | 3 ---
- net/core/ethtool.c | 7 +++++++
- 6 files changed, 11 insertions(+), 53 deletions(-)
-
---- a/drivers/net/ethernet/marvell/mvneta.c
-+++ b/drivers/net/ethernet/marvell/mvneta.c
-@@ -4045,22 +4045,6 @@ static int mvneta_ethtool_set_wol(struct
- return ret;
- }
-
--static int mvneta_ethtool_get_module_info(struct net_device *dev,
-- struct ethtool_modinfo *modinfo)
--{
-- struct mvneta_port *pp = netdev_priv(dev);
--
-- return phylink_ethtool_get_module_info(pp->phylink, modinfo);
--}
--
--static int mvneta_ethtool_get_module_eeprom(struct net_device *dev,
-- struct ethtool_eeprom *ee, u8 *buf)
--{
-- struct mvneta_port *pp = netdev_priv(dev);
--
-- return phylink_ethtool_get_module_eeprom(pp->phylink, ee, buf);
--}
--
- static int mvneta_ethtool_get_eee(struct net_device *dev,
- struct ethtool_eee *eee)
- {
-@@ -4145,8 +4129,6 @@ static const struct ethtool_ops mvneta_e
- .set_link_ksettings = mvneta_ethtool_set_link_ksettings,
- .get_wol = mvneta_ethtool_get_wol,
- .set_wol = mvneta_ethtool_set_wol,
-- .get_module_info = mvneta_ethtool_get_module_info,
-- .get_module_eeprom = mvneta_ethtool_get_module_eeprom,
- .get_eee = mvneta_ethtool_get_eee,
- .set_eee = mvneta_ethtool_set_eee,
- };
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -1060,34 +1060,6 @@ int phylink_ethtool_set_pauseparam(struc
- }
- EXPORT_SYMBOL_GPL(phylink_ethtool_set_pauseparam);
-
--int phylink_ethtool_get_module_info(struct phylink *pl,
-- struct ethtool_modinfo *modinfo)
--{
-- int ret = -EOPNOTSUPP;
--
-- WARN_ON(!lockdep_rtnl_is_held());
--
-- if (pl->sfp_bus)
-- ret = sfp_get_module_info(pl->sfp_bus, modinfo);
--
-- return ret;
--}
--EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_info);
--
--int phylink_ethtool_get_module_eeprom(struct phylink *pl,
-- struct ethtool_eeprom *ee, u8 *buf)
--{
-- int ret = -EOPNOTSUPP;
--
-- WARN_ON(!lockdep_rtnl_is_held());
--
-- if (pl->sfp_bus)
-- ret = sfp_get_module_eeprom(pl->sfp_bus, ee, buf);
--
-- return ret;
--}
--EXPORT_SYMBOL_GPL(phylink_ethtool_get_module_eeprom);
--
- int phylink_init_eee(struct phylink *pl, bool clk_stop_enable)
- {
- int ret = -EPROTONOSUPPORT;
---- a/drivers/net/phy/sfp-bus.c
-+++ b/drivers/net/phy/sfp-bus.c
-@@ -279,6 +279,7 @@ static int sfp_register_bus(struct sfp_b
- bus->socket_ops->attach(bus->sfp);
- if (bus->started)
- bus->socket_ops->start(bus->sfp);
-+ bus->netdev->sfp_bus = bus;
- bus->registered = true;
- return 0;
- }
-@@ -294,14 +295,13 @@ static void sfp_unregister_bus(struct sf
- if (bus->phydev && ops && ops->disconnect_phy)
- ops->disconnect_phy(bus->upstream);
- }
-+ bus->netdev->sfp_bus = NULL;
- bus->registered = false;
- }
-
-
- int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo)
- {
-- if (!bus->registered)
-- return -ENOIOCTLCMD;
- return bus->socket_ops->module_info(bus->sfp, modinfo);
- }
- EXPORT_SYMBOL_GPL(sfp_get_module_info);
-@@ -309,8 +309,6 @@ EXPORT_SYMBOL_GPL(sfp_get_module_info);
- int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
- u8 *data)
- {
-- if (!bus->registered)
-- return -ENOIOCTLCMD;
- return bus->socket_ops->module_eeprom(bus->sfp, ee, data);
- }
- EXPORT_SYMBOL_GPL(sfp_get_module_eeprom);
---- a/include/linux/netdevice.h
-+++ b/include/linux/netdevice.h
-@@ -57,6 +57,7 @@ struct device;
- struct phy_device;
- struct dsa_switch_tree;
-
-+struct sfp_bus;
- /* 802.11 specific */
- struct wireless_dev;
- /* 802.15.4 specific */
-@@ -1940,6 +1941,7 @@ struct net_device {
- struct netprio_map __rcu *priomap;
- #endif
- struct phy_device *phydev;
-+ struct sfp_bus *sfp_bus;
- struct lock_class_key *qdisc_tx_busylock;
- struct lock_class_key *qdisc_running_key;
- bool proto_down;
---- a/include/linux/phylink.h
-+++ b/include/linux/phylink.h
-@@ -125,9 +125,6 @@ void phylink_ethtool_get_pauseparam(stru
- struct ethtool_pauseparam *);
- int phylink_ethtool_set_pauseparam(struct phylink *,
- struct ethtool_pauseparam *);
--int phylink_ethtool_get_module_info(struct phylink *, struct ethtool_modinfo *);
--int phylink_ethtool_get_module_eeprom(struct phylink *,
-- struct ethtool_eeprom *, u8 *);
- int phylink_init_eee(struct phylink *, bool);
- int phylink_get_eee_err(struct phylink *);
- int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
---- a/net/core/ethtool.c
-+++ b/net/core/ethtool.c
-@@ -22,6 +22,7 @@
- #include <linux/bitops.h>
- #include <linux/uaccess.h>
- #include <linux/vmalloc.h>
-+#include <linux/sfp.h>
- #include <linux/slab.h>
- #include <linux/rtnetlink.h>
- #include <linux/sched/signal.h>
-@@ -2214,6 +2215,9 @@ static int __ethtool_get_module_info(str
- const struct ethtool_ops *ops = dev->ethtool_ops;
- struct phy_device *phydev = dev->phydev;
-
-+ if (dev->sfp_bus)
-+ return sfp_get_module_info(dev->sfp_bus, modinfo);
-+
- if (phydev && phydev->drv && phydev->drv->module_info)
- return phydev->drv->module_info(phydev, modinfo);
-
-@@ -2248,6 +2252,9 @@ static int __ethtool_get_module_eeprom(s
- const struct ethtool_ops *ops = dev->ethtool_ops;
- struct phy_device *phydev = dev->phydev;
-
-+ if (dev->sfp_bus)
-+ return sfp_get_module_eeprom(dev->sfp_bus, ee, data);
-+
- if (phydev && phydev->drv && phydev->drv->module_eeprom)
- return phydev->drv->module_eeprom(phydev, ee, data);
-
diff --git a/target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch b/target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch
deleted file mode 100644
index 10bd2d0a46..0000000000
--- a/target/linux/mvebu/patches-4.14/409-sfp-use-netdev-sfp_bus-for-start-stop.patch
+++ /dev/null
@@ -1,34 +0,0 @@
-From 883dc66755313e133a787eba4dfde313fe33525b Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 16:41:55 +0100
-Subject: sfp: use netdev sfp_bus for start/stop
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/phylink.c | 8 ++++----
- 1 file changed, 4 insertions(+), 4 deletions(-)
-
---- a/drivers/net/phy/phylink.c
-+++ b/drivers/net/phy/phylink.c
-@@ -777,8 +777,8 @@ void phylink_start(struct phylink *pl)
- clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
- phylink_run_resolve(pl);
-
-- if (pl->sfp_bus)
-- sfp_upstream_start(pl->sfp_bus);
-+ if (pl->netdev->sfp_bus)
-+ sfp_upstream_start(pl->netdev->sfp_bus);
- if (pl->phydev)
- phy_start(pl->phydev);
- }
-@@ -790,8 +790,8 @@ void phylink_stop(struct phylink *pl)
-
- if (pl->phydev)
- phy_stop(pl->phydev);
-- if (pl->sfp_bus)
-- sfp_upstream_stop(pl->sfp_bus);
-+ if (pl->netdev->sfp_bus)
-+ sfp_upstream_stop(pl->netdev->sfp_bus);
-
- phylink_run_resolve_and_disable(pl, PHYLINK_DISABLE_STOPPED);
- }
diff --git a/target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch b/target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch
deleted file mode 100644
index d6e5fbf33f..0000000000
--- a/target/linux/mvebu/patches-4.14/410-sfp-hack-allow-marvell-10G-phy-support-to-use-SFP.patch
+++ /dev/null
@@ -1,132 +0,0 @@
-From 4a4aca08b11501cb1b2c509113bbb65eb66a1f45 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 14:21:25 +0100
-Subject: sfp: hack: allow marvell 10G phy support to use SFP
-
-Allow the Marvell 10G PHY to register with the SFP bus, so that SFP+
-cages can work. This bypasses phylink, meaning that socket status
-is not taken into account for the link state. Also, the tx-disable
-signal must be commented out in DT for this to work...
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/marvell10g.c | 54 +++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 53 insertions(+), 1 deletion(-)
-
---- a/drivers/net/phy/marvell10g.c
-+++ b/drivers/net/phy/marvell10g.c
-@@ -15,8 +15,10 @@
- * If both the fiber and copper ports are connected, the first to gain
- * link takes priority and the other port is completely locked out.
- */
-+#include <linux/of.h>
- #include <linux/phy.h>
- #include <linux/marvell_phy.h>
-+#include <linux/sfp.h>
-
- enum {
- MV_PMA_BOOT = 0xc050,
-@@ -41,6 +43,11 @@ enum {
- MV_AN_RESULT_SPD_10000 = BIT(15),
- };
-
-+struct mv3310_priv {
-+ struct device_node *sfp_node;
-+ struct sfp_bus *sfp_bus;
-+};
-+
- static int mv3310_modify(struct phy_device *phydev, int devad, u16 reg,
- u16 mask, u16 bits)
- {
-@@ -59,8 +66,25 @@ static int mv3310_modify(struct phy_devi
- return ret < 0 ? ret : 1;
- }
-
-+static int mv3310_sfp_insert(void *upstream, const struct sfp_eeprom_id *id)
-+{
-+ struct phy_device *phydev = upstream;
-+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+
-+ if (sfp_parse_interface(priv->sfp_bus, id) != PHY_INTERFACE_MODE_10GKR) {
-+ dev_err(&phydev->mdio.dev, "incompatible SFP module inserted\n");
-+ return -EINVAL;
-+ }
-+ return 0;
-+}
-+
-+static const struct sfp_upstream_ops mv3310_sfp_ops = {
-+ .module_insert = mv3310_sfp_insert,
-+};
-+
- static int mv3310_probe(struct phy_device *phydev)
- {
-+ struct mv3310_priv *priv;
- u32 mmd_mask = MDIO_DEVS_PMAPMD | MDIO_DEVS_AN;
- int ret;
-
-@@ -78,9 +102,27 @@ static int mv3310_probe(struct phy_devic
- return -ENODEV;
- }
-
-+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(*priv), GFP_KERNEL);
-+ if (!priv)
-+ return -ENOMEM;
-+
-+ dev_set_drvdata(&phydev->mdio.dev, priv);
-+
-+ if (phydev->mdio.dev.of_node)
-+ priv->sfp_node = of_parse_phandle(phydev->mdio.dev.of_node,
-+ "sfp", 0);
-+
- return 0;
- }
-
-+static void mv3310_remove(struct phy_device *phydev)
-+{
-+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
-+
-+ if (priv->sfp_bus)
-+ sfp_unregister_upstream(priv->sfp_bus);
-+}
-+
- /*
- * Resetting the MV88X3310 causes it to become non-responsive. Avoid
- * setting the reset bit(s).
-@@ -92,6 +134,7 @@ static int mv3310_soft_reset(struct phy_
-
- static int mv3310_config_init(struct phy_device *phydev)
- {
-+ struct mv3310_priv *priv = dev_get_drvdata(&phydev->mdio.dev);
- __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
- u32 mask;
- int val;
-@@ -180,6 +223,14 @@ static int mv3310_config_init(struct phy
- phydev->supported &= mask;
- phydev->advertising &= phydev->supported;
-
-+ /* Would be nice to do this in the probe function, but unfortunately,
-+ * phylib doesn't have phydev->attached_dev set there.
-+ */
-+ if (priv->sfp_node && !priv->sfp_bus)
-+ priv->sfp_bus = sfp_register_upstream(priv->sfp_node,
-+ phydev->attached_dev,
-+ phydev, &mv3310_sfp_ops);
-+
- return 0;
- }
-
-@@ -363,12 +414,13 @@ static struct phy_driver mv3310_drivers[
- SUPPORTED_FIBRE |
- SUPPORTED_10000baseT_Full |
- SUPPORTED_Backplane,
-- .probe = mv3310_probe,
- .soft_reset = mv3310_soft_reset,
- .config_init = mv3310_config_init,
-+ .probe = mv3310_probe,
- .config_aneg = mv3310_config_aneg,
- .aneg_done = mv3310_aneg_done,
- .read_status = mv3310_read_status,
-+ .remove = mv3310_remove,
- },
- };
-
diff --git a/target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch b/target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch
deleted file mode 100644
index 9174765e6a..0000000000
--- a/target/linux/mvebu/patches-4.14/411-sfp-add-sfp-compatible.patch
+++ /dev/null
@@ -1,24 +0,0 @@
-From 3344f73509a34d2124b716efc79cd9787773018b Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri, 14 Apr 2017 20:17:13 +0100
-Subject: sfp: add sfp+ compatible
-
-Add a compatible for SFP+ cages. SFP+ cages are backwards compatible,
-but the ethernet device behind them may not support the slower speeds
-of SFP modules.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- drivers/net/phy/sfp.c | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -1168,6 +1168,7 @@ static int sfp_remove(struct platform_de
-
- static const struct of_device_id sfp_of_match[] = {
- { .compatible = "sff,sfp", },
-+ { .compatible = "sff,sfp+", },
- { },
- };
- MODULE_DEVICE_TABLE(of, sfp_of_match);
diff --git a/target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch b/target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
deleted file mode 100644
index 222a323825..0000000000
--- a/target/linux/mvebu/patches-4.14/412-ARM-dts-armada388-clearfog-emmc-on-clearfog-base.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From 8137da20701c776ad3481115305a5e8e410871ba Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:45 +0000
-Subject: ARM: dts: armada388-clearfog: emmc on clearfog base
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog-base.dts | 1 +
- .../dts/armada-38x-solidrun-microsom-emmc.dtsi | 62 ++++++++++++++++++++++
- 2 files changed, 63 insertions(+)
- create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -48,6 +48,7 @@
-
- /dts-v1/;
- #include "armada-388-clearfog.dtsi"
-+#include "armada-38x-solidrun-microsom-emmc.dtsi"
-
- / {
- model = "SolidRun Clearfog Base A1";
---- /dev/null
-+++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom-emmc.dtsi
-@@ -0,0 +1,62 @@
-+/*
-+ * Device Tree file for SolidRun Armada 38x Microsom add-on for eMMC
-+ *
-+ * Copyright (C) 2015 Russell King
-+ *
-+ * This board is in development; the contents of this file work with
-+ * the A1 rev 2.0 of the board, which does not represent final
-+ * production board. Things will change, don't expect this file to
-+ * remain compatible info the future.
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * version 2 as published by the Free Software Foundation.
-+ *
-+ * This file is distributed in the hope that it will be useful
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+/ {
-+ soc {
-+ internal-regs {
-+ sdhci@d8000 {
-+ bus-width = <4>;
-+ no-1-8-v;
-+ non-removable;
-+ pinctrl-0 = <&microsom_sdhci_pins>;
-+ pinctrl-names = "default";
-+ status = "okay";
-+ wp-inverted;
-+ };
-+ };
-+ };
-+};
diff --git a/target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch b/target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch
deleted file mode 100644
index 4aedc82fe7..0000000000
--- a/target/linux/mvebu/patches-4.14/413-ARM-dts-armada388-clearfog-increase-speed-of-i2c0-to.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-From 6e127081e669cf163a818dc04d590790e4ed9527 Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Tue, 29 Nov 2016 20:06:44 +0000
-Subject: ARM: dts: armada388-clearfog: increase speed of i2c0 to 400kHz
-
-All the devices on I2C0 support fast mode, so increase the bus speed
-to match. The Armada 388 is known to have a timing issue when in
-standard mode, which we believe causes the ficticious device at 0x64
-to appear.
-
-Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog.dtsi | 7 ++-----
- 1 file changed, 2 insertions(+), 5 deletions(-)
-
---- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
-@@ -143,8 +143,7 @@
- };
-
- &i2c0 {
-- /* Is there anything on this? */
-- clock-frequency = <100000>;
-+ clock-frequency = <400000>;
- pinctrl-0 = <&i2c0_pins>;
- pinctrl-names = "default";
- status = "okay";
-@@ -239,13 +238,11 @@
- };
- };
-
-- /* The MCP3021 is 100kHz clock only */
-+ /* The MCP3021 supports standard and fast modes */
- mikrobus_adc: mcp3021@4c {
- compatible = "microchip,mcp3021";
- reg = <0x4c>;
- };
--
-- /* Also something at 0x64 */
- };
-
- &i2c1 {
diff --git a/target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch b/target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
deleted file mode 100644
index 52ddcb6063..0000000000
--- a/target/linux/mvebu/patches-4.14/414-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
+++ /dev/null
@@ -1,81 +0,0 @@
-From 74fa68669c88f73bceff523cb764297b7d1e132b Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Tue, 29 Nov 2016 10:13:44 +0000
-Subject: ARM: dts: armada388-clearfog: add SFP module support
-
-Add SFP module support for Clearfog using the SFP phylink support.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog.dtsi | 44 ++++++++----------------------
- 1 file changed, 11 insertions(+), 33 deletions(-)
-
---- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
-@@ -117,6 +117,15 @@
- };
- };
- };
-+
-+ sfp: sfp {
-+ compatible = "sff,sfp";
-+ i2c-bus = <&i2c1>;
-+ los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-+ mod-def0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
-+ tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
-+ tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
-+ };
- };
-
- &eth1 {
-@@ -133,13 +142,10 @@
- bm,pool-long = <3>;
- bm,pool-short = <1>;
- buffer-manager = <&bm>;
-+ managed = "in-band-status";
- phy-mode = "sgmii";
-+ sfp = <&sfp>;
- status = "okay";
--
-- fixed-link {
-- speed = <1000>;
-- full-duplex;
-- };
- };
-
- &i2c0 {
-@@ -208,34 +214,6 @@
- output-low;
- line-name = "m.2 devslp";
- };
-- sfp_los {
-- /* SFP loss of signal */
-- gpio-hog;
-- gpios = <12 GPIO_ACTIVE_HIGH>;
-- input;
-- line-name = "sfp-los";
-- };
-- sfp_tx_fault {
-- /* SFP laser fault */
-- gpio-hog;
-- gpios = <13 GPIO_ACTIVE_HIGH>;
-- input;
-- line-name = "sfp-tx-fault";
-- };
-- sfp_tx_disable {
-- /* SFP transmit disable */
-- gpio-hog;
-- gpios = <14 GPIO_ACTIVE_HIGH>;
-- output-low;
-- line-name = "sfp-tx-disable";
-- };
-- sfp_mod_def0 {
-- /* SFP module present */
-- gpio-hog;
-- gpios = <15 GPIO_ACTIVE_LOW>;
-- input;
-- line-name = "sfp-mod-def0";
-- };
- };
-
- /* The MCP3021 supports standard and fast modes */
diff --git a/target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch b/target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
deleted file mode 100644
index 0e24d08c8d..0000000000
--- a/target/linux/mvebu/patches-4.14/415-ARM-dts-armada388-clearfog-document-MPP-usage.patch
+++ /dev/null
@@ -1,124 +0,0 @@
-From 09a0122c74ec076e08512f1b00b7ccb8a450282f Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Tue, 29 Nov 2016 10:15:43 +0000
-Subject: ARM: dts: armada388-clearfog: document MPP usage
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog-base.dts | 51 ++++++++++++++++++++++++++
- arch/arm/boot/dts/armada-388-clearfog.dts | 50 +++++++++++++++++++++++++
- 2 files changed, 101 insertions(+)
-
---- a/arch/arm/boot/dts/armada-388-clearfog-base.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog-base.dts
-@@ -108,3 +108,54 @@
- marvell,function = "gpio";
- };
- };
-+
-+/*
-+MPP
-+18: pu gpio pca9655 int
-+19: gpio phy reset
-+20: pu gpio sd0 detect
-+21: sd0:cmd
-+22: pd gpio mikro int
-+23:
-+
-+24: ua1:rxd mikro rx
-+25: ua1:txd mikro tx
-+26: pu i2c1:sck
-+27: pu i2c1:sda
-+28: sd0:clk
-+29: pd gpio mikro rst
-+30:
-+31:
-+
-+32:
-+33:
-+34:
-+35:
-+36:
-+37: sd0:d3
-+38: sd0:d0
-+39: sd0:d1
-+
-+40: sd0:d2
-+41:
-+42:
-+43: spi1:cs2 mikro cs
-+44: gpio rear button sw3
-+45: ref:clk_out0 phy#0 clock
-+46: ref:clk_out1 phy#1 clock
-+47:
-+
-+48: gpio J18 spare gpio
-+49: gpio U10 I2C_IRQ(GNSS)
-+50: gpio board id?
-+51:
-+52:
-+53:
-+54: gpio mikro pwm
-+55:
-+
-+56: pu spi1:mosi mikro mosi
-+57: pd spi1:sck mikro sck
-+58: spi1:miso mikro miso
-+59:
-+*/
---- a/arch/arm/boot/dts/armada-388-clearfog.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
-@@ -290,3 +290,53 @@
- */
- pinctrl-0 = <&spi1_pins &clearfog_spi1_cs_pins &mikro_spi_pins>;
- };
-+/*
-++#define A38x_CUSTOMER_BOARD_1_MPP16_23 0x00400011
-+MPP18: gpio ? (pca9655 int?)
-+MPP19: gpio ? (clkreq?)
-+MPP20: gpio ? (sd0 detect)
-+MPP21: sd0:cmd x sd0
-+MPP22: gpio x mikro int
-+MPP23: gpio x switch irq
-++#define A38x_CUSTOMER_BOARD_1_MPP24_31 0x22043333
-+MPP24: ua1:rxd x mikro rx
-+MPP25: ua1:txd x mikro tx
-+MPP26: i2c1:sck x mikro sck
-+MPP27: i2c1:sda x mikro sda
-+MPP28: sd0:clk x sd0
-+MPP29: gpio x mikro rst
-+MPP30: ge1:txd2 ? (config)
-+MPP31: ge1:txd3 ? (config)
-++#define A38x_CUSTOMER_BOARD_1_MPP32_39 0x44400002
-+MPP32: ge1:txctl ? (unused)
-+MPP33: gpio ? (pic_com0)
-+MPP34: gpio x rear button (pic_com1)
-+MPP35: gpio ? (pic_com2)
-+MPP36: gpio ? (unused)
-+MPP37: sd0:d3 x sd0
-+MPP38: sd0:d0 x sd0
-+MPP39: sd0:d1 x sd0
-++#define A38x_CUSTOMER_BOARD_1_MPP40_47 0x41144004
-+MPP40: sd0:d2 x sd0
-+MPP41: gpio x switch reset
-+MPP42: gpio ? sw1-1
-+MPP43: spi1:cs2 x mikro cs
-+MPP44: sata3:prsnt ? (unused)
-+MPP45: ref:clk_out0 ?
-+MPP46: ref:clk_out1 x switch clk
-+MPP47: 4 ? (unused)
-++#define A38x_CUSTOMER_BOARD_1_MPP48_55 0x40333333
-+MPP48: tdm:pclk
-+MPP49: tdm:fsync
-+MPP50: tdm:drx
-+MPP51: tdm:dtx
-+MPP52: tdm:int
-+MPP53: tdm:rst
-+MPP54: gpio ? (pwm)
-+MPP55: spi1:cs1 x slic
-++#define A38x_CUSTOMER_BOARD_1_MPP56_63 0x00004444
-+MPP56: spi1:mosi x mikro mosi
-+MPP57: spi1:sck x mikro sck
-+MPP58: spi1:miso x mikro miso
-+MPP59: spi1:cs0 x w25q32
-+*/
diff --git a/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch b/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch
deleted file mode 100644
index 2974a69760..0000000000
--- a/target/linux/mvebu/patches-4.14/420-rtc-armada38x-add-support-for-trimming-the-RTC.patch
+++ /dev/null
@@ -1,143 +0,0 @@
-commit f94ffbc2c2a4128c4412bb483d0807722dfb682b
-Author: Russell King <rmk+kernel@armlinux.org.uk>
-Date: Fri Sep 29 11:23:31 2017 +0100
-
- rtc: armada38x: add support for trimming the RTC
-
- Add support for trimming the RTC using the offset mechanism. This RTC
- supports two modes: low update mode and high update mode. Low update
- mode has finer precision than high update mode, so we use the low mode
- where possible.
-
- Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
- Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
-
---- a/drivers/rtc/rtc-armada38x.c
-+++ b/drivers/rtc/rtc-armada38x.c
-@@ -28,6 +28,8 @@
- #define RTC_IRQ_AL_EN BIT(0)
- #define RTC_IRQ_FREQ_EN BIT(1)
- #define RTC_IRQ_FREQ_1HZ BIT(2)
-+#define RTC_CCR 0x18
-+#define RTC_CCR_MODE BIT(15)
-
- #define RTC_TIME 0xC
- #define RTC_ALARM1 0x10
-@@ -343,18 +345,117 @@ static irqreturn_t armada38x_rtc_alarm_i
- return IRQ_HANDLED;
- }
-
-+/*
-+ * The information given in the Armada 388 functional spec is complex.
-+ * They give two different formulas for calculating the offset value,
-+ * but when considering "Offset" as an 8-bit signed integer, they both
-+ * reduce down to (we shall rename "Offset" as "val" here):
-+ *
-+ * val = (f_ideal / f_measured - 1) / resolution where f_ideal = 32768
-+ *
-+ * Converting to time, f = 1/t:
-+ * val = (t_measured / t_ideal - 1) / resolution where t_ideal = 1/32768
-+ *
-+ * => t_measured / t_ideal = val * resolution + 1
-+ *
-+ * "offset" in the RTC interface is defined as:
-+ * t = t0 * (1 + offset * 1e-9)
-+ * where t is the desired period, t0 is the measured period with a zero
-+ * offset, which is t_measured above. With t0 = t_measured and t = t_ideal,
-+ * offset = (t_ideal / t_measured - 1) / 1e-9
-+ *
-+ * => t_ideal / t_measured = offset * 1e-9 + 1
-+ *
-+ * so:
-+ *
-+ * offset * 1e-9 + 1 = 1 / (val * resolution + 1)
-+ *
-+ * We want "resolution" to be an integer, so resolution = R * 1e-9, giving
-+ * offset = 1e18 / (val * R + 1e9) - 1e9
-+ * val = (1e18 / (offset + 1e9) - 1e9) / R
-+ * with a common transformation:
-+ * f(x) = 1e18 / (x + 1e9) - 1e9
-+ * offset = f(val * R)
-+ * val = f(offset) / R
-+ *
-+ * Armada 38x supports two modes, fine mode (954ppb) and coarse mode (3815ppb).
-+ */
-+static long armada38x_ppb_convert(long ppb)
-+{
-+ long div = ppb + 1000000000L;
-+
-+ return div_s64(1000000000000000000LL + div / 2, div) - 1000000000L;
-+}
-+
-+static int armada38x_rtc_read_offset(struct device *dev, long *offset)
-+{
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+ unsigned long ccr, flags;
-+ long ppb_cor;
-+
-+ spin_lock_irqsave(&rtc->lock, flags);
-+ ccr = rtc->data->read_rtc_reg(rtc, RTC_CCR);
-+ spin_unlock_irqrestore(&rtc->lock, flags);
-+
-+ ppb_cor = (ccr & RTC_CCR_MODE ? 3815 : 954) * (s8)ccr;
-+ /* ppb_cor + 1000000000L can never be zero */
-+ *offset = armada38x_ppb_convert(ppb_cor);
-+
-+ return 0;
-+}
-+
-+static int armada38x_rtc_set_offset(struct device *dev, long offset)
-+{
-+ struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-+ unsigned long ccr = 0;
-+ long ppb_cor, off;
-+
-+ /*
-+ * The maximum ppb_cor is -128 * 3815 .. 127 * 3815, but we
-+ * need to clamp the input. This equates to -484270 .. 488558.
-+ * Not only is this to stop out of range "off" but also to
-+ * avoid the division by zero in armada38x_ppb_convert().
-+ */
-+ offset = clamp(offset, -484270L, 488558L);
-+
-+ ppb_cor = armada38x_ppb_convert(offset);
-+
-+ /*
-+ * Use low update mode where possible, which gives a better
-+ * resolution of correction.
-+ */
-+ off = DIV_ROUND_CLOSEST(ppb_cor, 954);
-+ if (off > 127 || off < -128) {
-+ ccr = RTC_CCR_MODE;
-+ off = DIV_ROUND_CLOSEST(ppb_cor, 3815);
-+ }
-+
-+ /*
-+ * Armada 388 requires a bit pattern in bits 14..8 depending on
-+ * the sign bit: { 0, ~S, S, S, S, S, S }
-+ */
-+ ccr |= (off & 0x3fff) ^ 0x2000;
-+ rtc_delayed_write(ccr, rtc, RTC_CCR);
-+
-+ return 0;
-+}
-+
- static const struct rtc_class_ops armada38x_rtc_ops = {
- .read_time = armada38x_rtc_read_time,
- .set_time = armada38x_rtc_set_time,
- .read_alarm = armada38x_rtc_read_alarm,
- .set_alarm = armada38x_rtc_set_alarm,
- .alarm_irq_enable = armada38x_rtc_alarm_irq_enable,
-+ .read_offset = armada38x_rtc_read_offset,
-+ .set_offset = armada38x_rtc_set_offset,
- };
-
- static const struct rtc_class_ops armada38x_rtc_ops_noirq = {
- .read_time = armada38x_rtc_read_time,
- .set_time = armada38x_rtc_set_time,
- .read_alarm = armada38x_rtc_read_alarm,
-+ .read_offset = armada38x_rtc_read_offset,
-+ .set_offset = armada38x_rtc_set_offset,
- };
-
- static const struct armada38x_rtc_data armada38x_data = {
diff --git a/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch b/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch
deleted file mode 100644
index 885e3d7c5e..0000000000
--- a/target/linux/mvebu/patches-4.14/421-rtc-armada38x-reset-after-rtc-power-loss.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 1a990fefb641398fb580a0ea0be99b0ff27cbb9b Mon Sep 17 00:00:00 2001
-From: Baruch Siach <baruch@tkos.co.il>
-Date: Thu, 21 Jun 2018 20:40:23 +0300
-Subject: [PATCH] rtc: armada38x: reset after rtc power loss
-
-When the RTC block looses power it needs a reset sequence to make it
-usable again. Otherwise, writes to the time register have no effect.
-
-This reset sequence combines information from the mvebu_rtc driver in
-the Marvell provided U-Boot, and the SolidRun provided U-Boot repo.
-
-Tested on the Armada 388 based SolidRun Clearfog Base.
-
-Signed-off-by: Baruch Siach <baruch@tkos.co.il>
-Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
----
- drivers/rtc/rtc-armada38x.c | 23 +++++++++++++++++++++++
- 1 file changed, 23 insertions(+)
-
---- a/drivers/rtc/rtc-armada38x.c
-+++ b/drivers/rtc/rtc-armada38x.c
-@@ -30,6 +30,8 @@
- #define RTC_IRQ_FREQ_1HZ BIT(2)
- #define RTC_CCR 0x18
- #define RTC_CCR_MODE BIT(15)
-+#define RTC_CONF_TEST 0x1C
-+#define RTC_NOMINAL_TIMING BIT(13)
-
- #define RTC_TIME 0xC
- #define RTC_ALARM1 0x10
-@@ -75,6 +77,7 @@ struct armada38x_rtc {
- void __iomem *regs_soc;
- spinlock_t lock;
- int irq;
-+ bool initialized;
- struct value_to_freq *val_to_freq;
- struct armada38x_rtc_data *data;
- };
-@@ -226,6 +229,23 @@ static int armada38x_rtc_read_time(struc
- return 0;
- }
-
-+static void armada38x_rtc_reset(struct armada38x_rtc *rtc)
-+{
-+ u32 reg;
-+
-+ reg = rtc->data->read_rtc_reg(rtc, RTC_CONF_TEST);
-+ /* If bits [7:0] are non-zero, assume RTC was uninitialized */
-+ if (reg & 0xff) {
-+ rtc_delayed_write(0, rtc, RTC_CONF_TEST);
-+ msleep(500); /* Oscillator startup time */
-+ rtc_delayed_write(0, rtc, RTC_TIME);
-+ rtc_delayed_write(SOC_RTC_ALARM1 | SOC_RTC_ALARM2, rtc,
-+ RTC_STATUS);
-+ rtc_delayed_write(RTC_NOMINAL_TIMING, rtc, RTC_CCR);
-+ }
-+ rtc->initialized = true;
-+}
-+
- static int armada38x_rtc_set_time(struct device *dev, struct rtc_time *tm)
- {
- struct armada38x_rtc *rtc = dev_get_drvdata(dev);
-@@ -237,6 +257,9 @@ static int armada38x_rtc_set_time(struct
- if (ret)
- goto out;
-
-+ if (!rtc->initialized)
-+ armada38x_rtc_reset(rtc);
-+
- spin_lock_irqsave(&rtc->lock, flags);
- rtc_delayed_write(time, rtc, RTC_TIME);
- spin_unlock_irqrestore(&rtc->lock, flags);
diff --git a/target/linux/mvebu/patches-4.14/423-ARM-dts-armada-385-linksys-Disable-internal-RTC.patch b/target/linux/mvebu/patches-4.14/423-ARM-dts-armada-385-linksys-Disable-internal-RTC.patch
deleted file mode 100644
index 040d6590b5..0000000000
--- a/target/linux/mvebu/patches-4.14/423-ARM-dts-armada-385-linksys-Disable-internal-RTC.patch
+++ /dev/null
@@ -1,28 +0,0 @@
-From e1cac198fea08c31ec204bed84c279ab05d20389 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 17 Mar 2018 15:22:25 +0100
-Subject: ARM: dts: armada-385-linksys: Disable internal RTC
-
-The internal RTC does not work correctly on these Linksys boards based
-on Marvell SoCs. For me it only shows Wed Dec 31 23:59:59 1969 and for
-others it is off by 3 minutes in 10 minutes running, this was reported
-by multiple users. On the Linksys Mamba device the device tree comment
-says that no crystal is connected to the internal RTC, this is probably
-also true for the other devices.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/armada-385-linksys.dtsi | 5 +++++
- 1 file changed, 5 insertions(+)
-
---- a/arch/arm/boot/dts/armada-385-linksys.dtsi
-+++ b/arch/arm/boot/dts/armada-385-linksys.dtsi
-@@ -304,3 +304,8 @@
- status = "okay";
- usb-phy = <&usb3_1_phy>;
- };
-+
-+&rtc {
-+ /* No crystal connected to the internal RTC */
-+ status = "disabled";
-+};
diff --git a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch
deleted file mode 100644
index b874d8265a..0000000000
--- a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 29 Sep 2016 11:44:39 +0200
-Subject: [PATCH] sfp: retry phy probe if unsuccessful
-
-Some phys seem to take longer than 50 ms to come out of reset, so retry
-until we find a phy.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++-------------
- 1 file changed, 25 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -506,7 +506,7 @@ static void sfp_sm_phy_detach(struct sfp
- sfp->mod_phy = NULL;
- }
-
--static void sfp_sm_probe_phy(struct sfp *sfp)
-+static int sfp_sm_probe_phy(struct sfp *sfp)
- {
- struct phy_device *phy;
- int err;
-@@ -516,11 +516,11 @@ static void sfp_sm_probe_phy(struct sfp
- phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
- if (phy == ERR_PTR(-ENODEV)) {
- dev_info(sfp->dev, "no PHY detected\n");
-- return;
-+ return -EAGAIN;
- }
- if (IS_ERR(phy)) {
- dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
-- return;
-+ return PTR_ERR(phy);
- }
-
- err = sfp_add_phy(sfp->sfp_bus, phy);
-@@ -528,11 +528,13 @@ static void sfp_sm_probe_phy(struct sfp
- phy_device_remove(phy);
- phy_device_free(phy);
- dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
-- return;
-+ return err;
- }
-
- sfp->mod_phy = phy;
- phy_start(phy);
-+
-+ return 0;
- }
-
- static void sfp_sm_link_up(struct sfp *sfp)
-@@ -578,14 +580,9 @@ static void sfp_sm_fault(struct sfp *sfp
-
- static void sfp_sm_mod_init(struct sfp *sfp)
- {
-- sfp_module_tx_enable(sfp);
-+ int ret = 0;
-
-- /* Wait t_init before indicating that the link is up, provided the
-- * current state indicates no TX_FAULT. If TX_FAULT clears before
-- * this time, that's fine too.
-- */
-- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-- sfp->sm_retries = 5;
-+ sfp_module_tx_enable(sfp);
-
- /* Setting the serdes link mode is guesswork: there's no
- * field in the EEPROM which indicates what mode should
-@@ -599,7 +596,22 @@ static void sfp_sm_mod_init(struct sfp *
- if (sfp->id.base.e1000_base_t ||
- sfp->id.base.e100_base_lx ||
- sfp->id.base.e100_base_fx)
-- sfp_sm_probe_phy(sfp);
-+ ret = sfp_sm_probe_phy(sfp);
-+
-+ if (!ret) {
-+ /* Wait t_init before indicating that the link is up, provided
-+ * the current state indicates no TX_FAULT. If TX_FAULT clears
-+ * this time, that's fine too.
-+ */
-+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+ sfp->sm_retries = 5;
-+ return;
-+ }
-+
-+ if (ret == -EAGAIN)
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ else
-+ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
- }
-
- static int sfp_sm_mod_probe(struct sfp *sfp)
diff --git a/target/linux/mvebu/patches-4.14/501-spi-a3700-Change-SPI-mode-before-asserting-chip-sele.patch b/target/linux/mvebu/patches-4.14/501-spi-a3700-Change-SPI-mode-before-asserting-chip-sele.patch
deleted file mode 100644
index 3ac7091188..0000000000
--- a/target/linux/mvebu/patches-4.14/501-spi-a3700-Change-SPI-mode-before-asserting-chip-sele.patch
+++ /dev/null
@@ -1,70 +0,0 @@
-From dd7aa8d4b53b3484ba31ba56f3ff1be7deb38530 Mon Sep 17 00:00:00 2001
-From: Maxime Chevallier <maxime.chevallier@smile.fr>
-Date: Tue, 10 Oct 2017 10:43:18 +0200
-Subject: spi: a3700: Change SPI mode before asserting chip-select
-
-The spi device mode should be configured in the controller before the
-chip-select is asserted, so that a clock polarity configuration change
-is not interpreted as a clock tick by the device.
-
-This patch moves the mode setting to the 'prepare_message' function
-instead of the 'transfer_one' function.
-
-By doing so, this patch also removes redundant code in
-a3700_spi_clock_set.
-
-This was tested on EspressoBin board, with spidev.
-
-Signed-off-by: Maxime Chevallier <maxime.chevallier@smile.fr>
-Signed-off-by: Mark Brown <broonie@kernel.org>
----
- drivers/spi/spi-armada-3700.c | 17 ++++-------------
- 1 file changed, 4 insertions(+), 13 deletions(-)
-
---- a/drivers/spi/spi-armada-3700.c
-+++ b/drivers/spi/spi-armada-3700.c
-@@ -214,7 +214,7 @@ static void a3700_spi_mode_set(struct a3
- }
-
- static void a3700_spi_clock_set(struct a3700_spi *a3700_spi,
-- unsigned int speed_hz, u16 mode)
-+ unsigned int speed_hz)
- {
- u32 val;
- u32 prescale;
-@@ -239,17 +239,6 @@ static void a3700_spi_clock_set(struct a
- val |= A3700_SPI_CLK_CAPT_EDGE;
- spireg_write(a3700_spi, A3700_SPI_IF_TIME_REG, val);
- }
--
-- val = spireg_read(a3700_spi, A3700_SPI_IF_CFG_REG);
-- val &= ~(A3700_SPI_CLK_POL | A3700_SPI_CLK_PHA);
--
-- if (mode & SPI_CPOL)
-- val |= A3700_SPI_CLK_POL;
--
-- if (mode & SPI_CPHA)
-- val |= A3700_SPI_CLK_PHA;
--
-- spireg_write(a3700_spi, A3700_SPI_IF_CFG_REG, val);
- }
-
- static void a3700_spi_bytelen_set(struct a3700_spi *a3700_spi, unsigned int len)
-@@ -431,7 +420,7 @@ static void a3700_spi_transfer_setup(str
-
- a3700_spi = spi_master_get_devdata(spi->master);
-
-- a3700_spi_clock_set(a3700_spi, xfer->speed_hz, spi->mode);
-+ a3700_spi_clock_set(a3700_spi, xfer->speed_hz);
-
- byte_len = xfer->bits_per_word >> 3;
-
-@@ -592,6 +581,8 @@ static int a3700_spi_prepare_message(str
-
- a3700_spi_bytelen_set(a3700_spi, 4);
-
-+ a3700_spi_mode_set(a3700_spi, spi->mode);
-+
- return 0;
- }
-
diff --git a/target/linux/mvebu/patches-4.14/502-arm64-dts-marvell-armada-37xx-add-UART-clock.patch b/target/linux/mvebu/patches-4.14/502-arm64-dts-marvell-armada-37xx-add-UART-clock.patch
deleted file mode 100644
index 47e0751c5f..0000000000
--- a/target/linux/mvebu/patches-4.14/502-arm64-dts-marvell-armada-37xx-add-UART-clock.patch
+++ /dev/null
@@ -1,27 +0,0 @@
-From 2ff0d0b5bb397c3dc5c9b97bd0f20948f0b77740 Mon Sep 17 00:00:00 2001
-From: Miquel Raynal <miquel.raynal@free-electrons.com>
-Date: Fri, 13 Oct 2017 11:01:57 +0200
-Subject: arm64: dts: marvell: armada-37xx: add UART clock
-
-Add the missing clock property to armada-3700 UART node.
-
-This clock will be used to derive the prescaler value to comply with
-the requested baudrate.
-
-Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
-Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -135,6 +135,7 @@
- uart0: serial@12000 {
- compatible = "marvell,armada-3700-uart";
- reg = <0x12000 0x200>;
-+ clocks = <&xtalclk>;
- interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
diff --git a/target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-periph-cosmetic-changes.patch b/target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-periph-cosmetic-changes.patch
deleted file mode 100644
index 7343e01d19..0000000000
--- a/target/linux/mvebu/patches-4.14/503-clk-mvebu-armada-37xx-periph-cosmetic-changes.patch
+++ /dev/null
@@ -1,78 +0,0 @@
-From adf4e289dd7f801c3fe12e0e6b491e11e548cd3d Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 30 Nov 2017 14:40:27 +0100
-Subject: clk: mvebu: armada-37xx-periph: cosmetic changes
-
-This patches fixes few cosmetic issues such as alignment, blank lines
-and required space.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 17 +++++++++--------
- 1 file changed, 9 insertions(+), 8 deletions(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -79,6 +79,7 @@ static const struct clk_div_table clk_ta
- { .val = 1, .div = 4, },
- { .val = 0, .div = 0, }, /* last entry */
- };
-+
- static const struct clk_ops clk_double_div_ops;
-
- #define PERIPH_GATE(_name, _bit) \
-@@ -217,7 +218,7 @@ PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL
- PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
- PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
-
--static struct clk_periph_data data_nb[] ={
-+static struct clk_periph_data data_nb[] = {
- REF_CLK_FULL_DD(mmc),
- REF_CLK_FULL_DD(sata_host),
- REF_CLK_FULL_DD(sec_at),
-@@ -281,7 +282,7 @@ static unsigned int get_div(void __iomem
- }
-
- static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
-- unsigned long parent_rate)
-+ unsigned long parent_rate)
- {
- struct clk_double_div *double_div = to_clk_double_div(hw);
- unsigned int div;
-@@ -303,6 +304,7 @@ static const struct of_device_id armada_
- .data = data_sb, },
- { }
- };
-+
- static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
- void __iomem *reg, spinlock_t *lock,
- struct device *dev, struct clk_hw **hw)
-@@ -355,9 +357,9 @@ static int armada_3700_add_composite_clk
- }
-
- *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
-- data->num_parents, mux_hw,
-- mux_ops, rate_hw, rate_ops,
-- gate_hw, gate_ops, CLK_IGNORE_UNUSED);
-+ data->num_parents, mux_hw,
-+ mux_ops, rate_hw, rate_ops,
-+ gate_hw, gate_ops, CLK_IGNORE_UNUSED);
-
- if (IS_ERR(*hw))
- return PTR_ERR(*hw);
-@@ -406,12 +408,11 @@ static int armada_3700_periph_clock_prob
- if (armada_3700_add_composite_clk(&data[i], reg,
- &driver_data->lock, dev, hw))
- dev_err(dev, "Can't register periph clock %s\n",
-- data[i].name);
--
-+ data[i].name);
- }
-
- ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
-- driver_data->hw_data);
-+ driver_data->hw_data);
- if (ret) {
- for (i = 0; i < num_periph; i++)
- clk_hw_unregister(driver_data->hw_data->hws[i]);
diff --git a/target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch b/target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch
deleted file mode 100644
index f9dec9f2ee..0000000000
--- a/target/linux/mvebu/patches-4.14/504-clk-mvebu-armada-37xx-periph-prepare-cpu-clk-to-be-u.patch
+++ /dev/null
@@ -1,178 +0,0 @@
-From 9818a7a4fd10f72537cdf2a5ec3402f2c245ea24 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 30 Nov 2017 14:40:28 +0100
-Subject: clk: mvebu: armada-37xx-periph: prepare cpu clk to be
- used with DVFS
-
-When DVFS will be enabled then the cpu clk will use a different set of
-register at run time. That means that we won't be able to use the common
-callback and need to use our own ones.
-
-This patch prepares this change by switching on our own set of callbacks
-without modifying the behavior of the clocks.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 82 ++++++++++++++++++++++++++++++----
- 1 file changed, 73 insertions(+), 9 deletions(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -46,7 +46,17 @@ struct clk_double_div {
- u8 shift2;
- };
-
-+struct clk_pm_cpu {
-+ struct clk_hw hw;
-+ void __iomem *reg_mux;
-+ u8 shift_mux;
-+ u32 mask_mux;
-+ void __iomem *reg_div;
-+ u8 shift_div;
-+};
-+
- #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
-+#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)
-
- struct clk_periph_data {
- const char *name;
-@@ -55,6 +65,7 @@ struct clk_periph_data {
- struct clk_hw *mux_hw;
- struct clk_hw *rate_hw;
- struct clk_hw *gate_hw;
-+ struct clk_hw *muxrate_hw;
- bool is_double_div;
- };
-
-@@ -81,6 +92,7 @@ static const struct clk_div_table clk_ta
- };
-
- static const struct clk_ops clk_double_div_ops;
-+static const struct clk_ops clk_pm_cpu_ops;
-
- #define PERIPH_GATE(_name, _bit) \
- struct clk_gate gate_##_name = { \
-@@ -122,6 +134,18 @@ struct clk_divider rate_##_name = { \
- } \
- };
-
-+#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2) \
-+struct clk_pm_cpu muxrate_##_name = { \
-+ .reg_mux = (void *)TBG_SEL, \
-+ .mask_mux = 3, \
-+ .shift_mux = _shift1, \
-+ .reg_div = (void *)_reg, \
-+ .shift_div = _shift2, \
-+ .hw.init = &(struct clk_init_data){ \
-+ .ops = &clk_pm_cpu_ops, \
-+ } \
-+};
-+
- #define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
- static PERIPH_GATE(_name, _bit); \
- static PERIPH_MUX(_name, _shift); \
-@@ -136,10 +160,6 @@ static PERIPH_DIV(_name, _reg, _shift1,
- static PERIPH_GATE(_name, _bit); \
- static PERIPH_DIV(_name, _reg, _shift, _table);
-
--#define PERIPH_CLK_MUX_DIV(_name, _shift, _reg, _shift_div, _table) \
--static PERIPH_MUX(_name, _shift); \
--static PERIPH_DIV(_name, _reg, _shift_div, _table);
--
- #define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
- static PERIPH_MUX(_name, _shift); \
- static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);
-@@ -180,13 +200,12 @@ static PERIPH_DOUBLEDIV(_name, _reg1, _r
- .rate_hw = &rate_##_name.hw, \
- }
-
--#define REF_CLK_MUX_DIV(_name) \
-+#define REF_CLK_PM_CPU(_name) \
- { .name = #_name, \
- .parent_names = (const char *[]){ "TBG-A-P", \
- "TBG-B-P", "TBG-A-S", "TBG-B-S"}, \
- .num_parents = 4, \
-- .mux_hw = &mux_##_name.hw, \
-- .rate_hw = &rate_##_name.hw, \
-+ .muxrate_hw = &muxrate_##_name.hw, \
- }
-
- #define REF_CLK_MUX_DD(_name) \
-@@ -216,7 +235,7 @@ PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV
- PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
- PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
- PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
--PERIPH_CLK_MUX_DIV(cpu, 22, DIV_SEL0, 28, clk_table6);
-+static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);
-
- static struct clk_periph_data data_nb[] = {
- REF_CLK_FULL_DD(mmc),
-@@ -235,7 +254,7 @@ static struct clk_periph_data data_nb[]
- REF_CLK_FULL(trace),
- REF_CLK_FULL(counter),
- REF_CLK_FULL_DD(eip97),
-- REF_CLK_MUX_DIV(cpu),
-+ REF_CLK_PM_CPU(cpu),
- { },
- };
-
-@@ -297,6 +316,37 @@ static const struct clk_ops clk_double_d
- .recalc_rate = clk_double_div_recalc_rate,
- };
-
-+static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ int num_parents = clk_hw_get_num_parents(hw);
-+ u32 val;
-+
-+ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
-+ val &= pm_cpu->mask_mux;
-+
-+ if (val >= num_parents)
-+ return -EINVAL;
-+
-+ return val;
-+}
-+
-+static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
-+ unsigned long parent_rate)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ unsigned int div;
-+
-+ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
-+
-+ return DIV_ROUND_UP_ULL((u64)parent_rate, div);
-+}
-+
-+static const struct clk_ops clk_pm_cpu_ops = {
-+ .get_parent = clk_pm_cpu_get_parent,
-+ .recalc_rate = clk_pm_cpu_recalc_rate,
-+};
-+
- static const struct of_device_id armada_3700_periph_clock_of_match[] = {
- { .compatible = "marvell,armada-3700-periph-clock-nb",
- .data = data_nb, },
-@@ -356,6 +406,20 @@ static int armada_3700_add_composite_clk
- }
- }
-
-+ if (data->muxrate_hw) {
-+ struct clk_pm_cpu *pmcpu_clk;
-+ struct clk_hw *muxrate_hw = data->muxrate_hw;
-+
-+ pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
-+ pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
-+ pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;
-+
-+ mux_hw = muxrate_hw;
-+ rate_hw = muxrate_hw;
-+ mux_ops = muxrate_hw->init->ops;
-+ rate_ops = muxrate_hw->init->ops;
-+ }
-+
- *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
- data->num_parents, mux_hw,
- mux_ops, rate_hw, rate_ops,
diff --git a/target/linux/mvebu/patches-4.14/505-clk-mvebu-armada-37xx-periph-add-DVFS-support-for-cp.patch b/target/linux/mvebu/patches-4.14/505-clk-mvebu-armada-37xx-periph-add-DVFS-support-for-cp.patch
deleted file mode 100644
index 2065e788af..0000000000
--- a/target/linux/mvebu/patches-4.14/505-clk-mvebu-armada-37xx-periph-add-DVFS-support-for-cp.patch
+++ /dev/null
@@ -1,315 +0,0 @@
-From 2089dc33ea0e3917465929d4020fbff3d6dbf7f4 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 30 Nov 2017 14:40:29 +0100
-Subject: clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks
-
-When DVFS is enabled the CPU clock setting is done using an other set of
-registers.
-
-These Power Management registers are exposed through a syscon as they
-will also be used by other drivers such as the cpufreq.
-
-This patch add the possibility to modify the CPU frequency using the
-associate load level matching the target frequency. Then all the
-frequency switch is handle by the hardware.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-[sboyd@codeaurora.org: Grow a local variable for regmap pointer
-to keep lines shorter]
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 221 ++++++++++++++++++++++++++++++++-
- 1 file changed, 217 insertions(+), 4 deletions(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -21,9 +21,11 @@
- */
-
- #include <linux/clk-provider.h>
-+#include <linux/mfd/syscon.h>
- #include <linux/of.h>
- #include <linux/of_device.h>
- #include <linux/platform_device.h>
-+#include <linux/regmap.h>
- #include <linux/slab.h>
-
- #define TBG_SEL 0x0
-@@ -33,6 +35,26 @@
- #define CLK_SEL 0x10
- #define CLK_DIS 0x14
-
-+#define LOAD_LEVEL_NR 4
-+
-+#define ARMADA_37XX_NB_L0L1 0x18
-+#define ARMADA_37XX_NB_L2L3 0x1C
-+#define ARMADA_37XX_NB_TBG_DIV_OFF 13
-+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
-+#define ARMADA_37XX_NB_CLK_SEL_OFF 11
-+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
-+#define ARMADA_37XX_NB_TBG_SEL_OFF 9
-+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
-+#define ARMADA_37XX_NB_CONFIG_SHIFT 16
-+#define ARMADA_37XX_NB_DYN_MOD 0x24
-+#define ARMADA_37XX_NB_DFS_EN 31
-+#define ARMADA_37XX_NB_CPU_LOAD 0x30
-+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
-+#define ARMADA_37XX_DVFS_LOAD_0 0
-+#define ARMADA_37XX_DVFS_LOAD_1 1
-+#define ARMADA_37XX_DVFS_LOAD_2 2
-+#define ARMADA_37XX_DVFS_LOAD_3 3
-+
- struct clk_periph_driver_data {
- struct clk_hw_onecell_data *hw_data;
- spinlock_t lock;
-@@ -53,6 +75,7 @@ struct clk_pm_cpu {
- u32 mask_mux;
- void __iomem *reg_div;
- u8 shift_div;
-+ struct regmap *nb_pm_base;
- };
-
- #define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
-@@ -316,14 +339,94 @@ static const struct clk_ops clk_double_d
- .recalc_rate = clk_double_div_recalc_rate,
- };
-
-+static void armada_3700_pm_dvfs_update_regs(unsigned int load_level,
-+ unsigned int *reg,
-+ unsigned int *offset)
-+{
-+ if (load_level <= ARMADA_37XX_DVFS_LOAD_1)
-+ *reg = ARMADA_37XX_NB_L0L1;
-+ else
-+ *reg = ARMADA_37XX_NB_L2L3;
-+
-+ if (load_level == ARMADA_37XX_DVFS_LOAD_0 ||
-+ load_level == ARMADA_37XX_DVFS_LOAD_2)
-+ *offset += ARMADA_37XX_NB_CONFIG_SHIFT;
-+}
-+
-+static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base)
-+{
-+ unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD;
-+
-+ if (IS_ERR(base))
-+ return false;
-+
-+ regmap_read(base, reg, &val);
-+
-+ return !!(val & BIT(ARMADA_37XX_NB_DFS_EN));
-+}
-+
-+static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base)
-+{
-+ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
-+ unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF;
-+ unsigned int load_level, div;
-+
-+ /*
-+ * This function is always called after the function
-+ * armada_3700_pm_dvfs_is_enabled, so no need to check again
-+ * if the base is valid.
-+ */
-+ regmap_read(base, reg, &load_level);
-+
-+ /*
-+ * The register and the offset inside this register accessed to
-+ * read the current divider depend on the load level
-+ */
-+ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
-+ armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
-+
-+ regmap_read(base, reg, &div);
-+
-+ return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK;
-+}
-+
-+static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base)
-+{
-+ unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
-+ unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF;
-+ unsigned int load_level, sel;
-+
-+ /*
-+ * This function is always called after the function
-+ * armada_3700_pm_dvfs_is_enabled, so no need to check again
-+ * if the base is valid
-+ */
-+ regmap_read(base, reg, &load_level);
-+
-+ /*
-+ * The register and the offset inside this register accessed to
-+ * read the current divider depend on the load level
-+ */
-+ load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
-+ armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
-+
-+ regmap_read(base, reg, &sel);
-+
-+ return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK;
-+}
-+
- static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
- {
- struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
- int num_parents = clk_hw_get_num_parents(hw);
- u32 val;
-
-- val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
-- val &= pm_cpu->mask_mux;
-+ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
-+ val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base);
-+ } else {
-+ val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
-+ val &= pm_cpu->mask_mux;
-+ }
-
- if (val >= num_parents)
- return -EINVAL;
-@@ -331,19 +434,124 @@ static u8 clk_pm_cpu_get_parent(struct c
- return val;
- }
-
-+static int clk_pm_cpu_set_parent(struct clk_hw *hw, u8 index)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ struct regmap *base = pm_cpu->nb_pm_base;
-+ int load_level;
-+
-+ /*
-+ * We set the clock parent only if the DVFS is available but
-+ * not enabled.
-+ */
-+ if (IS_ERR(base) || armada_3700_pm_dvfs_is_enabled(base))
-+ return -EINVAL;
-+
-+ /* Set the parent clock for all the load level */
-+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
-+ unsigned int reg, mask, val,
-+ offset = ARMADA_37XX_NB_TBG_SEL_OFF;
-+
-+ armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
-+
-+ val = index << offset;
-+ mask = ARMADA_37XX_NB_TBG_SEL_MASK << offset;
-+ regmap_update_bits(base, reg, mask, val);
-+ }
-+ return 0;
-+}
-+
- static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
- {
- struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
- unsigned int div;
-
-- div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
--
-+ if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base))
-+ div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base);
-+ else
-+ div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
- return DIV_ROUND_UP_ULL((u64)parent_rate, div);
- }
-
-+static long clk_pm_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long *parent_rate)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ struct regmap *base = pm_cpu->nb_pm_base;
-+ unsigned int div = *parent_rate / rate;
-+ unsigned int load_level;
-+ /* only available when DVFS is enabled */
-+ if (!armada_3700_pm_dvfs_is_enabled(base))
-+ return -EINVAL;
-+
-+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
-+ unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF;
-+
-+ armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
-+
-+ regmap_read(base, reg, &val);
-+
-+ val >>= offset;
-+ val &= ARMADA_37XX_NB_TBG_DIV_MASK;
-+ if (val == div)
-+ /*
-+ * We found a load level matching the target
-+ * divider, switch to this load level and
-+ * return.
-+ */
-+ return *parent_rate / div;
-+ }
-+
-+ /* We didn't find any valid divider */
-+ return -EINVAL;
-+}
-+
-+static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
-+ unsigned long parent_rate)
-+{
-+ struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-+ struct regmap *base = pm_cpu->nb_pm_base;
-+ unsigned int div = parent_rate / rate;
-+ unsigned int load_level;
-+
-+ /* only available when DVFS is enabled */
-+ if (!armada_3700_pm_dvfs_is_enabled(base))
-+ return -EINVAL;
-+
-+ for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
-+ unsigned int reg, mask, val,
-+ offset = ARMADA_37XX_NB_TBG_DIV_OFF;
-+
-+ armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);
-+
-+ regmap_read(base, reg, &val);
-+ val >>= offset;
-+ val &= ARMADA_37XX_NB_TBG_DIV_MASK;
-+
-+ if (val == div) {
-+ /*
-+ * We found a load level matching the target
-+ * divider, switch to this load level and
-+ * return.
-+ */
-+ reg = ARMADA_37XX_NB_CPU_LOAD;
-+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
-+ regmap_update_bits(base, reg, mask, load_level);
-+
-+ return rate;
-+ }
-+ }
-+
-+ /* We didn't find any valid divider */
-+ return -EINVAL;
-+}
-+
- static const struct clk_ops clk_pm_cpu_ops = {
- .get_parent = clk_pm_cpu_get_parent,
-+ .set_parent = clk_pm_cpu_set_parent,
-+ .round_rate = clk_pm_cpu_round_rate,
-+ .set_rate = clk_pm_cpu_set_rate,
- .recalc_rate = clk_pm_cpu_recalc_rate,
- };
-
-@@ -409,6 +617,7 @@ static int armada_3700_add_composite_clk
- if (data->muxrate_hw) {
- struct clk_pm_cpu *pmcpu_clk;
- struct clk_hw *muxrate_hw = data->muxrate_hw;
-+ struct regmap *map;
-
- pmcpu_clk = to_clk_pm_cpu(muxrate_hw);
- pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
-@@ -418,6 +627,10 @@ static int armada_3700_add_composite_clk
- rate_hw = muxrate_hw;
- mux_ops = muxrate_hw->init->ops;
- rate_ops = muxrate_hw->init->ops;
-+
-+ map = syscon_regmap_lookup_by_compatible(
-+ "marvell,armada-3700-nb-pm");
-+ pmcpu_clk->nb_pm_base = map;
- }
-
- *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
diff --git a/target/linux/mvebu/patches-4.14/506-cpufreq-Add-DVFS-support-for-Armada-37xx.patch b/target/linux/mvebu/patches-4.14/506-cpufreq-Add-DVFS-support-for-Armada-37xx.patch
deleted file mode 100644
index 11562c582b..0000000000
--- a/target/linux/mvebu/patches-4.14/506-cpufreq-Add-DVFS-support-for-Armada-37xx.patch
+++ /dev/null
@@ -1,297 +0,0 @@
-From 92ce45fb875d7c3e021cc454482fe0687ff54f29 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 14 Dec 2017 16:00:05 +0100
-Subject: cpufreq: Add DVFS support for Armada 37xx
-
-This patch adds DVFS support for the Armada 37xx SoCs
-
-There are up to four CPU frequency loads for Armada 37xx controlled by
-the hardware.
-
-This driver associates the CPU load level to a frequency, then the
-hardware will switch while selecting a load level.
-
-The hardware also can associate a voltage for each level (AVS support)
-but it is not yet supported
-
-Tested-by: Andre Heider <a.heider@gmail.com>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/cpufreq/Kconfig.arm | 7 +
- drivers/cpufreq/Makefile | 1 +
- drivers/cpufreq/armada-37xx-cpufreq.c | 241 ++++++++++++++++++++++++++++++++++
- 3 files changed, 249 insertions(+)
- create mode 100644 drivers/cpufreq/armada-37xx-cpufreq.c
-
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -2,6 +2,13 @@
- # ARM CPU Frequency scaling drivers
- #
-
-+config ARM_ARMADA_37XX_CPUFREQ
-+ tristate "Armada 37xx CPUFreq support"
-+ depends on ARCH_MVEBU
-+ help
-+ This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
-+ The Armada 37xx PMU supports 4 frequency and VDD levels.
-+
- # big LITTLE core layer and glue drivers
- config ARM_BIG_LITTLE_CPUFREQ
- tristate "Generic ARM big LITTLE CPUfreq driver"
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -52,6 +52,7 @@ obj-$(CONFIG_ARM_BIG_LITTLE_CPUFREQ) +=
- # LITTLE drivers, so that it is probed last.
- obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o
-
-+obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ) += armada-37xx-cpufreq.o
- obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ) += brcmstb-avs-cpufreq.o
- obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
- obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
---- /dev/null
-+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
-@@ -0,0 +1,241 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ * CPU frequency scaling support for Armada 37xx platform.
-+ *
-+ * Copyright (C) 2017 Marvell
-+ *
-+ * Gregory CLEMENT <gregory.clement@free-electrons.com>
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/cpu.h>
-+#include <linux/cpufreq.h>
-+#include <linux/err.h>
-+#include <linux/interrupt.h>
-+#include <linux/io.h>
-+#include <linux/mfd/syscon.h>
-+#include <linux/module.h>
-+#include <linux/of_address.h>
-+#include <linux/of_device.h>
-+#include <linux/of_irq.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/regmap.h>
-+#include <linux/slab.h>
-+
-+/* Power management in North Bridge register set */
-+#define ARMADA_37XX_NB_L0L1 0x18
-+#define ARMADA_37XX_NB_L2L3 0x1C
-+#define ARMADA_37XX_NB_TBG_DIV_OFF 13
-+#define ARMADA_37XX_NB_TBG_DIV_MASK 0x7
-+#define ARMADA_37XX_NB_CLK_SEL_OFF 11
-+#define ARMADA_37XX_NB_CLK_SEL_MASK 0x1
-+#define ARMADA_37XX_NB_CLK_SEL_TBG 0x1
-+#define ARMADA_37XX_NB_TBG_SEL_OFF 9
-+#define ARMADA_37XX_NB_TBG_SEL_MASK 0x3
-+#define ARMADA_37XX_NB_VDD_SEL_OFF 6
-+#define ARMADA_37XX_NB_VDD_SEL_MASK 0x3
-+#define ARMADA_37XX_NB_CONFIG_SHIFT 16
-+#define ARMADA_37XX_NB_DYN_MOD 0x24
-+#define ARMADA_37XX_NB_CLK_SEL_EN BIT(26)
-+#define ARMADA_37XX_NB_TBG_EN BIT(28)
-+#define ARMADA_37XX_NB_DIV_EN BIT(29)
-+#define ARMADA_37XX_NB_VDD_EN BIT(30)
-+#define ARMADA_37XX_NB_DFS_EN BIT(31)
-+#define ARMADA_37XX_NB_CPU_LOAD 0x30
-+#define ARMADA_37XX_NB_CPU_LOAD_MASK 0x3
-+#define ARMADA_37XX_DVFS_LOAD_0 0
-+#define ARMADA_37XX_DVFS_LOAD_1 1
-+#define ARMADA_37XX_DVFS_LOAD_2 2
-+#define ARMADA_37XX_DVFS_LOAD_3 3
-+
-+/*
-+ * On Armada 37xx the Power management manages 4 level of CPU load,
-+ * each level can be associated with a CPU clock source, a CPU
-+ * divider, a VDD level, etc...
-+ */
-+#define LOAD_LEVEL_NR 4
-+
-+struct armada_37xx_dvfs {
-+ u32 cpu_freq_max;
-+ u8 divider[LOAD_LEVEL_NR];
-+};
-+
-+static struct armada_37xx_dvfs armada_37xx_dvfs[] = {
-+ {.cpu_freq_max = 1200*1000*1000, .divider = {1, 2, 4, 6} },
-+ {.cpu_freq_max = 1000*1000*1000, .divider = {1, 2, 4, 5} },
-+ {.cpu_freq_max = 800*1000*1000, .divider = {1, 2, 3, 4} },
-+ {.cpu_freq_max = 600*1000*1000, .divider = {2, 4, 5, 6} },
-+};
-+
-+static struct armada_37xx_dvfs *armada_37xx_cpu_freq_info_get(u32 freq)
-+{
-+ int i;
-+
-+ for (i = 0; i < ARRAY_SIZE(armada_37xx_dvfs); i++) {
-+ if (freq == armada_37xx_dvfs[i].cpu_freq_max)
-+ return &armada_37xx_dvfs[i];
-+ }
-+
-+ pr_err("Unsupported CPU frequency %d MHz\n", freq/1000000);
-+ return NULL;
-+}
-+
-+/*
-+ * Setup the four level managed by the hardware. Once the four level
-+ * will be configured then the DVFS will be enabled.
-+ */
-+static void __init armada37xx_cpufreq_dvfs_setup(struct regmap *base,
-+ struct clk *clk, u8 *divider)
-+{
-+ int load_lvl;
-+ struct clk *parent;
-+
-+ for (load_lvl = 0; load_lvl < LOAD_LEVEL_NR; load_lvl++) {
-+ unsigned int reg, mask, val, offset = 0;
-+
-+ if (load_lvl <= ARMADA_37XX_DVFS_LOAD_1)
-+ reg = ARMADA_37XX_NB_L0L1;
-+ else
-+ reg = ARMADA_37XX_NB_L2L3;
-+
-+ if (load_lvl == ARMADA_37XX_DVFS_LOAD_0 ||
-+ load_lvl == ARMADA_37XX_DVFS_LOAD_2)
-+ offset += ARMADA_37XX_NB_CONFIG_SHIFT;
-+
-+ /* Set cpu clock source, for all the level we use TBG */
-+ val = ARMADA_37XX_NB_CLK_SEL_TBG << ARMADA_37XX_NB_CLK_SEL_OFF;
-+ mask = (ARMADA_37XX_NB_CLK_SEL_MASK
-+ << ARMADA_37XX_NB_CLK_SEL_OFF);
-+
-+ /*
-+ * Set cpu divider based on the pre-computed array in
-+ * order to have balanced step.
-+ */
-+ val |= divider[load_lvl] << ARMADA_37XX_NB_TBG_DIV_OFF;
-+ mask |= (ARMADA_37XX_NB_TBG_DIV_MASK
-+ << ARMADA_37XX_NB_TBG_DIV_OFF);
-+
-+ /* Set VDD divider which is actually the load level. */
-+ val |= load_lvl << ARMADA_37XX_NB_VDD_SEL_OFF;
-+ mask |= (ARMADA_37XX_NB_VDD_SEL_MASK
-+ << ARMADA_37XX_NB_VDD_SEL_OFF);
-+
-+ val <<= offset;
-+ mask <<= offset;
-+
-+ regmap_update_bits(base, reg, mask, val);
-+ }
-+
-+ /*
-+ * Set cpu clock source, for all the level we keep the same
-+ * clock source that the one already configured. For this one
-+ * we need to use the clock framework
-+ */
-+ parent = clk_get_parent(clk);
-+ clk_set_parent(clk, parent);
-+}
-+
-+static void __init armada37xx_cpufreq_disable_dvfs(struct regmap *base)
-+{
-+ unsigned int reg = ARMADA_37XX_NB_DYN_MOD,
-+ mask = ARMADA_37XX_NB_DFS_EN;
-+
-+ regmap_update_bits(base, reg, mask, 0);
-+}
-+
-+static void __init armada37xx_cpufreq_enable_dvfs(struct regmap *base)
-+{
-+ unsigned int val, reg = ARMADA_37XX_NB_CPU_LOAD,
-+ mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
-+
-+ /* Start with the highest load (0) */
-+ val = ARMADA_37XX_DVFS_LOAD_0;
-+ regmap_update_bits(base, reg, mask, val);
-+
-+ /* Now enable DVFS for the CPUs */
-+ reg = ARMADA_37XX_NB_DYN_MOD;
-+ mask = ARMADA_37XX_NB_CLK_SEL_EN | ARMADA_37XX_NB_TBG_EN |
-+ ARMADA_37XX_NB_DIV_EN | ARMADA_37XX_NB_VDD_EN |
-+ ARMADA_37XX_NB_DFS_EN;
-+
-+ regmap_update_bits(base, reg, mask, mask);
-+}
-+
-+static int __init armada37xx_cpufreq_driver_init(void)
-+{
-+ struct armada_37xx_dvfs *dvfs;
-+ struct platform_device *pdev;
-+ unsigned int cur_frequency;
-+ struct regmap *nb_pm_base;
-+ struct device *cpu_dev;
-+ int load_lvl, ret;
-+ struct clk *clk;
-+
-+ nb_pm_base =
-+ syscon_regmap_lookup_by_compatible("marvell,armada-3700-nb-pm");
-+
-+ if (IS_ERR(nb_pm_base))
-+ return -ENODEV;
-+
-+ /* Before doing any configuration on the DVFS first, disable it */
-+ armada37xx_cpufreq_disable_dvfs(nb_pm_base);
-+
-+ /*
-+ * On CPU 0 register the operating points supported (which are
-+ * the nominal CPU frequency and full integer divisions of
-+ * it).
-+ */
-+ cpu_dev = get_cpu_device(0);
-+ if (!cpu_dev) {
-+ dev_err(cpu_dev, "Cannot get CPU\n");
-+ return -ENODEV;
-+ }
-+
-+ clk = clk_get(cpu_dev, 0);
-+ if (IS_ERR(clk)) {
-+ dev_err(cpu_dev, "Cannot get clock for CPU0\n");
-+ return PTR_ERR(clk);
-+ }
-+
-+ /* Get nominal (current) CPU frequency */
-+ cur_frequency = clk_get_rate(clk);
-+ if (!cur_frequency) {
-+ dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
-+ return -EINVAL;
-+ }
-+
-+ dvfs = armada_37xx_cpu_freq_info_get(cur_frequency);
-+ if (!dvfs)
-+ return -EINVAL;
-+
-+ armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
-+
-+ for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
-+ load_lvl++) {
-+ unsigned long freq = cur_frequency / dvfs->divider[load_lvl];
-+
-+ ret = dev_pm_opp_add(cpu_dev, freq, 0);
-+ if (ret) {
-+ /* clean-up the already added opp before leaving */
-+ while (load_lvl-- > ARMADA_37XX_DVFS_LOAD_0) {
-+ freq = cur_frequency / dvfs->divider[load_lvl];
-+ dev_pm_opp_remove(cpu_dev, freq);
-+ }
-+ return ret;
-+ }
-+ }
-+
-+ /* Now that everything is setup, enable the DVFS at hardware level */
-+ armada37xx_cpufreq_enable_dvfs(nb_pm_base);
-+
-+ pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-+
-+ return PTR_ERR_OR_ZERO(pdev);
-+}
-+/* late_initcall, to guarantee the driver is loaded after A37xx clock driver */
-+late_initcall(armada37xx_cpufreq_driver_init);
-+
-+MODULE_AUTHOR("Gregory CLEMENT <gregory.clement@free-electrons.com>");
-+MODULE_DESCRIPTION("Armada 37xx cpufreq driver");
-+MODULE_LICENSE("GPL");
diff --git a/target/linux/mvebu/patches-4.14/507-arm64-dts-marvell-armada-37xx-add-nodes-allowing-cpu.patch b/target/linux/mvebu/patches-4.14/507-arm64-dts-marvell-armada-37xx-add-nodes-allowing-cpu.patch
deleted file mode 100644
index dd3727c554..0000000000
--- a/target/linux/mvebu/patches-4.14/507-arm64-dts-marvell-armada-37xx-add-nodes-allowing-cpu.patch
+++ /dev/null
@@ -1,48 +0,0 @@
-From e8d66e7927b2a15310df0eb44a67d120ea147a59 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@free-electrons.com>
-Date: Thu, 14 Dec 2017 16:00:06 +0100
-Subject: arm64: dts: marvell: armada-37xx: add nodes allowing cpufreq
- support
-
-In order to be able to use cpu freq, we need to associate a clock to each
-CPU and to expose the power management registers.
-
-Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
----
- arch/arm64/boot/dts/marvell/armada-372x.dtsi | 1 +
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 7 +++++++
- 2 files changed, 8 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-372x.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-372x.dtsi
-@@ -56,6 +56,7 @@
- device_type = "cpu";
- compatible = "arm,cortex-a53","arm,armv8";
- reg = <0x1>;
-+ clocks = <&nb_periph_clk 16>;
- enable-method = "psci";
- };
- };
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -64,6 +64,7 @@
- device_type = "cpu";
- compatible = "arm,cortex-a53", "arm,armv8";
- reg = <0>;
-+ clocks = <&nb_periph_clk 16>;
- enable-method = "psci";
- };
- };
-@@ -219,6 +220,12 @@
- };
- };
-
-+ nb_pm: syscon@14000 {
-+ compatible = "marvell,armada-3700-nb-pm",
-+ "syscon";
-+ reg = <0x14000 0x60>;
-+ };
-+
- pinctrl_sb: pinctrl@18800 {
- compatible = "marvell,armada3710-sb-pinctrl",
- "syscon", "simple-mfd";
diff --git a/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch b/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
deleted file mode 100644
index 840897473f..0000000000
--- a/target/linux/mvebu/patches-4.14/508-arm64-dts-armada-3720-espressobin-wire-up-spi-flash.patch
+++ /dev/null
@@ -1,56 +0,0 @@
-From bffed3d4abcd32ba6d492a9bd7ebe81dc92eaa9a Mon Sep 17 00:00:00 2001
-From: Ellie Reeves <ellierevves@gmail.com>
-Date: Sun, 25 Mar 2018 21:57:36 +0200
-Subject: [PATCH] arm64: dts: armada-3720-espressobin: wire up spi flash
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This is the storage the machine boots from by default. The partitioning
-is taken from the U-Boot that is shipped with the board. There is some
-more space on the flash that isn't used.
-
-Tested-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-Signed-off-by: Ellie Reeves <ellierevves@gmail.com>
-Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../dts/marvell/armada-3720-espressobin.dts | 27 +++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -96,6 +96,33 @@
- status = "okay";
- };
-
-+&spi0 {
-+ status = "okay";
-+
-+ flash@0 {
-+ reg = <0>;
-+ compatible = "winbond,w25q32dw", "jedec,spi-flash";
-+ spi-max-frequency = <104000000>;
-+ m25p,fast-read;
-+
-+ partitions {
-+ compatible = "fixed-partitions";
-+ #address-cells = <1>;
-+ #size-cells = <1>;
-+
-+ partition@0 {
-+ label = "uboot";
-+ reg = <0 0x180000>;
-+ };
-+
-+ partition@180000 {
-+ label = "ubootenv";
-+ reg = <0x180000 0x10000>;
-+ };
-+ };
-+ };
-+};
-+
- /* Exported on the micro USB connector J5 through an FTDI */
- &uart0 {
- status = "okay";
diff --git a/target/linux/mvebu/patches-4.14/509-cpufreq-armada-37xx-Fix-clock-leak.patch b/target/linux/mvebu/patches-4.14/509-cpufreq-armada-37xx-Fix-clock-leak.patch
deleted file mode 100644
index 7479c6db21..0000000000
--- a/target/linux/mvebu/patches-4.14/509-cpufreq-armada-37xx-Fix-clock-leak.patch
+++ /dev/null
@@ -1,35 +0,0 @@
-From bbcc328561040292f7d6796954d478e4a2335e6f Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@bootlin.com>
-Date: Wed, 4 Apr 2018 16:44:44 +0200
-Subject: [PATCH] cpufreq: armada-37xx: Fix clock leak
-
-There was no clk_put() balancing the clk_get(). This commit fixes it.
-
-Fixes: 92ce45fb875d (cpufreq: Add DVFS support for Armada 37xx)
-Cc: 4.16+ <stable@vger.kernel.org> # 4.16+
-Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
-Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
----
- drivers/cpufreq/armada-37xx-cpufreq.c | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/drivers/cpufreq/armada-37xx-cpufreq.c
-+++ b/drivers/cpufreq/armada-37xx-cpufreq.c
-@@ -202,6 +202,7 @@ static int __init armada37xx_cpufreq_dri
- cur_frequency = clk_get_rate(clk);
- if (!cur_frequency) {
- dev_err(cpu_dev, "Failed to get clock rate for CPU\n");
-+ clk_put(clk);
- return -EINVAL;
- }
-
-@@ -210,6 +211,7 @@ static int __init armada37xx_cpufreq_dri
- return -EINVAL;
-
- armada37xx_cpufreq_dvfs_setup(nb_pm_base, clk, dvfs->divider);
-+ clk_put(clk);
-
- for (load_lvl = ARMADA_37XX_DVFS_LOAD_0; load_lvl < LOAD_LEVEL_NR;
- load_lvl++) {
diff --git a/target/linux/mvebu/patches-4.14/510-clk-mvebu-armada-37xx-periph-Fix-switching-CPU-rate-.patch b/target/linux/mvebu/patches-4.14/510-clk-mvebu-armada-37xx-periph-Fix-switching-CPU-rate-.patch
deleted file mode 100644
index 42bfef7b7e..0000000000
--- a/target/linux/mvebu/patches-4.14/510-clk-mvebu-armada-37xx-periph-Fix-switching-CPU-rate-.patch
+++ /dev/null
@@ -1,92 +0,0 @@
-From 61c40f35f5cd6f67ccbd7319a1722eb78c815989 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@bootlin.com>
-Date: Tue, 19 Jun 2018 14:34:45 +0200
-Subject: [PATCH] clk: mvebu: armada-37xx-periph: Fix switching CPU rate from
- 300Mhz to 1.2GHz
-
-Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz
-respectively) to L0 frequency (1.2 Ghz) requires a significant amount
-of time to let VDD stabilize to the appropriate voltage. This amount of
-time is large enough that it cannot be covered by the hardware
-countdown register. Due to this, the CPU might start operating at L0
-before the voltage is stabilized, leading to CPU stalls.
-
-To work around this problem, we prevent switching directly from the
-L2/L3 frequencies to the L0 frequency, and instead switch to the L1
-frequency in-between. The sequence therefore becomes:
-
-1. First switch from L2/L3(200/300MHz) to L1(600MHZ)
-2. Sleep 20ms for stabling VDD voltage
-3. Then switch from L1(600MHZ) to L0(1200Mhz).
-
-It is based on the work done by Ken Ma <make@marvell.com>
-
-Cc: stable@vger.kernel.org
-Fixes: 2089dc33ea0e ("clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks")
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 38 ++++++++++++++++++++++++++
- 1 file changed, 38 insertions(+)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -35,6 +35,7 @@
- #define CLK_SEL 0x10
- #define CLK_DIS 0x14
-
-+#define ARMADA_37XX_DVFS_LOAD_1 1
- #define LOAD_LEVEL_NR 4
-
- #define ARMADA_37XX_NB_L0L1 0x18
-@@ -507,6 +508,40 @@ static long clk_pm_cpu_round_rate(struct
- return -EINVAL;
- }
-
-+/*
-+ * Switching the CPU from the L2 or L3 frequencies (300 and 200 Mhz
-+ * respectively) to L0 frequency (1.2 Ghz) requires a significant
-+ * amount of time to let VDD stabilize to the appropriate
-+ * voltage. This amount of time is large enough that it cannot be
-+ * covered by the hardware countdown register. Due to this, the CPU
-+ * might start operating at L0 before the voltage is stabilized,
-+ * leading to CPU stalls.
-+ *
-+ * To work around this problem, we prevent switching directly from the
-+ * L2/L3 frequencies to the L0 frequency, and instead switch to the L1
-+ * frequency in-between. The sequence therefore becomes:
-+ * 1. First switch from L2/L3(200/300MHz) to L1(600MHZ)
-+ * 2. Sleep 20ms for stabling VDD voltage
-+ * 3. Then switch from L1(600MHZ) to L0(1200Mhz).
-+ */
-+static void clk_pm_cpu_set_rate_wa(unsigned long rate, struct regmap *base)
-+{
-+ unsigned int cur_level;
-+
-+ if (rate != 1200 * 1000 * 1000)
-+ return;
-+
-+ regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level);
-+ cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
-+ if (cur_level <= ARMADA_37XX_DVFS_LOAD_1)
-+ return;
-+
-+ regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD,
-+ ARMADA_37XX_NB_CPU_LOAD_MASK,
-+ ARMADA_37XX_DVFS_LOAD_1);
-+ msleep(20);
-+}
-+
- static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
- {
-@@ -537,6 +572,9 @@ static int clk_pm_cpu_set_rate(struct cl
- */
- reg = ARMADA_37XX_NB_CPU_LOAD;
- mask = ARMADA_37XX_NB_CPU_LOAD_MASK;
-+
-+ clk_pm_cpu_set_rate_wa(rate, base);
-+
- regmap_update_bits(base, reg, mask, load_level);
-
- return rate;
diff --git a/target/linux/mvebu/patches-4.14/511-clk-mvebu-armada-37xx-periph-Fix-wrong-return-value-.patch b/target/linux/mvebu/patches-4.14/511-clk-mvebu-armada-37xx-periph-Fix-wrong-return-value-.patch
deleted file mode 100644
index 389a13a2b4..0000000000
--- a/target/linux/mvebu/patches-4.14/511-clk-mvebu-armada-37xx-periph-Fix-wrong-return-value-.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 616bf80d381da13fbb392ebff06f46f946e3ee84 Mon Sep 17 00:00:00 2001
-From: Gregory CLEMENT <gregory.clement@bootlin.com>
-Date: Fri, 13 Jul 2018 12:27:26 +0200
-Subject: [PATCH] clk: mvebu: armada-37xx-periph: Fix wrong return value in
- get_parent
-
-The return value of the get_parent operation is a u8, whereas a -EINVAL
-was returned. This wrong value was return if the value was bigger that
-the number of parent but this case was already handled by the core.
-
-So we can just remove this chunk of code to fix the issue.
-
-Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
-Fixes: 9818a7a4fd10 ("clk: mvebu: armada-37xx-periph: prepare cpu clk to
-be used with DVFS")
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 3 ---
- 1 file changed, 3 deletions(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -429,9 +429,6 @@ static u8 clk_pm_cpu_get_parent(struct c
- val &= pm_cpu->mask_mux;
- }
-
-- if (val >= num_parents)
-- return -EINVAL;
--
- return val;
- }
-
diff --git a/target/linux/mvebu/patches-4.14/512-clk-mvebu-armada-37xx-periph-Remove-unused-var-num_p.patch b/target/linux/mvebu/patches-4.14/512-clk-mvebu-armada-37xx-periph-Remove-unused-var-num_p.patch
deleted file mode 100644
index 874f982bd7..0000000000
--- a/target/linux/mvebu/patches-4.14/512-clk-mvebu-armada-37xx-periph-Remove-unused-var-num_p.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 8927c27b32703e28041ae19bf25ea53461be83a1 Mon Sep 17 00:00:00 2001
-From: Anders Roxell <anders.roxell@linaro.org>
-Date: Fri, 27 Jul 2018 00:27:21 +0200
-Subject: [PATCH] clk: mvebu: armada-37xx-periph: Remove unused var num_parents
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-When building armada-37xx-periph, num_parents isn't used in function
-clk_pm_cpu_get_parent:
-drivers/clk/mvebu/armada-37xx-periph.c: In function ‘clk_pm_cpu_get_parent’:
-drivers/clk/mvebu/armada-37xx-periph.c:419:6: warning: unused variable ‘num_parents’ [-Wunused-variable]
- int num_parents = clk_hw_get_num_parents(hw);
- ^~~~~~~~~~~
-Remove the declaration of num_parents to dispose the warning.
-
-Fixes: 616bf80d381d ("clk: mvebu: armada-37xx-periph: Fix wrong return value in get_parent")
-Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
-Signed-off-by: Stephen Boyd <sboyd@kernel.org>
----
- drivers/clk/mvebu/armada-37xx-periph.c | 1 -
- 1 file changed, 1 deletion(-)
-
---- a/drivers/clk/mvebu/armada-37xx-periph.c
-+++ b/drivers/clk/mvebu/armada-37xx-periph.c
-@@ -419,7 +419,6 @@ static unsigned int armada_3700_pm_dvfs_
- static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
- {
- struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
-- int num_parents = clk_hw_get_num_parents(hw);
- u32 val;
-
- if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
diff --git a/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch b/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch
deleted file mode 100644
index 19702a61ed..0000000000
--- a/target/linux/mvebu/patches-4.14/513-arm64-dts-marvell-armada37xx-Add-emmc-sdio-pinctrl-d.patch
+++ /dev/null
@@ -1,40 +0,0 @@
-From eefe328439642101774f0f5c4ea0dc6ba1cfb687 Mon Sep 17 00:00:00 2001
-From: Ding Tao <miyatsu@qq.com>
-Date: Fri, 26 Oct 2018 11:50:27 +0000
-Subject: [PATCH] arm64: dts: marvell: armada37xx: Add emmc/sdio pinctrl
- definition
-
-Add emmc/sdio pinctrl definition for marvell armada37xx SoCs.
-
-Signed-off-by: Ding Tao <miyatsu@qq.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 10 ++++++++++
- 1 file changed, 10 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -218,6 +218,11 @@
- groups = "uart2";
- function = "uart";
- };
-+
-+ mmc_pins: mmc-pins {
-+ groups = "emmc_nb";
-+ function = "emmc";
-+ };
- };
-
- nb_pm: syscon@14000 {
-@@ -247,6 +252,11 @@
- function = "mii";
- };
-
-+ sdio_pins: sdio-pins {
-+ groups = "sdio_sb";
-+ function = "sdio";
-+ };
-+
- };
-
- eth0: ethernet@30000 {
diff --git a/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch b/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
deleted file mode 100644
index 26d090f050..0000000000
--- a/target/linux/mvebu/patches-4.14/514-arm64-dts-marvell-armada-37xx-Enable-emmc-on-espress.patch
+++ /dev/null
@@ -1,49 +0,0 @@
-From 43ebc7c1b3ed8198b9acf3019eca16e722f7331c Mon Sep 17 00:00:00 2001
-From: Ding Tao <miyatsu@qq.com>
-Date: Fri, 26 Oct 2018 11:50:28 +0000
-Subject: [PATCH] arm64: dts: marvell: armada-37xx: Enable emmc on espressobin
-
-The ESPRESSObin board has a emmc interface available on U11: declare it
-and let the bootloader enable it if the emmc is present.
-
-[gregory.clement@bootlin.com: disable the emmc by default]
-Signed-off-by: Ding Tao <miyatsu@qq.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../dts/marvell/armada-3720-espressobin.dts | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -93,9 +93,31 @@
- cd-gpios = <&gpionb 3 GPIO_ACTIVE_LOW>;
- marvell,pad-type = "sd";
- vqmmc-supply = <&vcc_sd_reg1>;
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdio_pins>;
- status = "okay";
- };
-
-+/* U11 */
-+&sdhci0 {
-+ non-removable;
-+ bus-width = <8>;
-+ mmc-ddr-1_8v;
-+ mmc-hs400-1_8v;
-+ marvell,xenon-emmc;
-+ marvell,xenon-tun-count = <9>;
-+ marvell,pad-type = "fixed-1-8v";
-+
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc_pins>;
-+/*
-+ * This eMMC is not populated on all boards, so disable it by
-+ * default and let the bootloader enable it, if it is present
-+ */
-+ status = "disabled";
-+};
-+
- &spi0 {
- status = "okay";
-
diff --git a/target/linux/mvebu/patches-4.14/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch b/target/linux/mvebu/patches-4.14/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
deleted file mode 100644
index 206caf2fce..0000000000
--- a/target/linux/mvebu/patches-4.14/520-arm64-dts-marvell-armada37xx-Add-eth0-alias.patch
+++ /dev/null
@@ -1,20 +0,0 @@
-From be893f672e340b56ca60f2f6c32fdd713a5852f5 Mon Sep 17 00:00:00 2001
-From: Kevin Mihelich <kevin@archlinuxarm.org>
-Date: Tue, 4 Jul 2017 19:25:28 -0600
-Subject: arm64: dts: marvell: armada37xx: Add eth0 alias
-
-Signed-off-by: Kevin Mihelich <kevin@archlinuxarm.org>
----
- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
-@@ -54,6 +54,7 @@
- #size-cells = <2>;
-
- aliases {
-+ ethernet0 = &eth0;
- serial0 = &uart0;
- };
-
diff --git a/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch b/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch
deleted file mode 100644
index fc7cb2af1e..0000000000
--- a/target/linux/mvebu/patches-4.14/521-arm64-dts-armada-3720-espressobin-correct-spi-node.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 3217cdfe8a3eae76fafbebbe407be5985a7fd4c2 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Mon, 31 Dec 2018 14:18:50 +0100
-Subject: [PATCH] arm64: dts: armada-3720-espressobin: correct spi node
-
-The manufacturer of this board, ships it with various SPI NOR chips and
-increments U-Boot bootloader version along the time. There is no way to
-tell which is placed on the board since no revision bump takes place.
-This creates two issues.
-
-The first, cosmetic. Since the SPI chip may differ, there's message on
-boot stating that kernel expected w25q32dw and found different one. To
-correct this, remove optional device-specific compatible string. Being
-here lets replace bogus "spi-flash" string with proper one.
-
-The second is linked to partitions layout, it changed after commit [1]
-in Marvells downstream U-Boot fork, shifting environment location to the
-end of boot device. Since the new boards can have U-Boot with this
-change it can lead to improper results writing or reading from these
-partitions. We can't tell if users will update bootloader to recent
-version, so let's drop current layout.
-
-1. https://github.com/MarvellEmbeddedProcessors/u-boot-marvell/commit/81e7251252aefe1a6b829ed05f3586320cb45372
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- .../dts/marvell/armada-3720-espressobin.dts | 18 +-----------------
- 1 file changed, 1 insertion(+), 17 deletions(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -123,25 +123,9 @@
-
- flash@0 {
- reg = <0>;
-- compatible = "winbond,w25q32dw", "jedec,spi-flash";
-+ compatible = "jedec,spi-nor";
- spi-max-frequency = <104000000>;
- m25p,fast-read;
--
-- partitions {
-- compatible = "fixed-partitions";
-- #address-cells = <1>;
-- #size-cells = <1>;
--
-- partition@0 {
-- label = "uboot";
-- reg = <0 0x180000>;
-- };
--
-- partition@180000 {
-- label = "ubootenv";
-- reg = <0x180000 0x10000>;
-- };
-- };
- };
- };
-
diff --git a/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch b/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
deleted file mode 100644
index d0103bba19..0000000000
--- a/target/linux/mvebu/patches-4.14/522-arm64-dts-marvell-armada-3720-espressobin-add-ports-.patch
+++ /dev/null
@@ -1,26 +0,0 @@
-From 6ea9a1ee9367fb35acff1c08a0dc4213ff4687a0 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Tue, 9 Apr 2019 15:53:42 +0200
-Subject: [PATCH] arm64: dts: marvell: armada-3720-espressobin: add ports
- phandle
-
-Instead of referencing the whole mdio node, add ports phandle to adjust
-port labels in dts for different hardware iterations of ESPRESSObin
-boards.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -153,7 +153,7 @@
-
- dsa,member = <0 0>;
-
-- ports {
-+ ports: ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
diff --git a/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch b/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
deleted file mode 100644
index 74e78d3b54..0000000000
--- a/target/linux/mvebu/patches-4.14/524-PCI-aardvark-set-host-and-device-to-the-same-MAX-payload-size.patch
+++ /dev/null
@@ -1,138 +0,0 @@
-From patchwork Thu Sep 28 12:58:34 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2,
- 3/7] PCI: aardvark: set host and device to the same MAX payload size
-X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-X-Patchwork-Id: 819587
-Message-Id: <20170928125838.11887-4-thomas.petazzoni@free-electrons.com>
-To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
-Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
- Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
- <gregory.clement@free-electrons.com>,
- Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
- Yehuda Yitschak <yehuday@marvell.com>,
- linux-arm-kernel@lists.infradead.org, Antoine Tenart
- <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
- <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Thu, 28 Sep 2017 14:58:34 +0200
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-List-Id: <linux-pci.vger.kernel.org>
-
-From: Victor Gu <xigu@marvell.com>
-
-Since the Aardvark does not implement a PCIe root bus, the Linux PCIe
-subsystem will not align the MAX payload size between the host and the
-device. This patch ensures that the host and device have the same MAX
-payload size, fixing a number of problems with various PCIe devices.
-
-This is part of fixing bug
-https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
-reported as the user to be important to get a Intel 7260 mini-PCIe
-WiFi card working.
-
-Fixes: Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
-Signed-off-by: Victor Gu <xigu@marvell.com>
-Reviewed-by: Evan Wang <xswang@marvell.com>
-Reviewed-by: Nadav Haklai <nadavh@marvell.com>
-[Thomas: tweak commit log.]
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- drivers/pci/host/pci-aardvark.c | 60 ++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 59 insertions(+), 1 deletion(-)
-
---- a/drivers/pci/host/pci-aardvark.c
-+++ b/drivers/pci/host/pci-aardvark.c
-@@ -30,9 +30,11 @@
- #define PCIE_CORE_DEV_CTRL_STATS_REG 0xc8
- #define PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE (0 << 4)
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT 5
-+#define PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ 0x2
- #define PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE (0 << 11)
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT 12
- #define PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ 0x2
-+#define PCIE_CORE_MPS_UNIT_BYTE 128
- #define PCIE_CORE_LINK_CTRL_STAT_REG 0xd0
- #define PCIE_CORE_LINK_L0S_ENTRY BIT(0)
- #define PCIE_CORE_LINK_TRAINING BIT(5)
-@@ -297,7 +299,8 @@ static void advk_pcie_setup_hw(struct ad
-
- /* Set PCIe Device Control and Status 1 PF0 register */
- reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
-- (7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
-+ (PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ <<
-+ PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
- PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
- (PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
- PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
-@@ -886,6 +889,58 @@ out_release_res:
- return err;
- }
-
-+static int advk_pcie_find_smpss(struct pci_dev *dev, void *data)
-+{
-+ u8 *smpss = data;
-+
-+ if (!dev)
-+ return 0;
-+
-+ if (!pci_is_pcie(dev))
-+ return 0;
-+
-+ if (*smpss > dev->pcie_mpss)
-+ *smpss = dev->pcie_mpss;
-+
-+ return 0;
-+}
-+
-+static int advk_pcie_bus_configure_mps(struct pci_dev *dev, void *data)
-+{
-+ int mps;
-+
-+ if (!dev)
-+ return 0;
-+
-+ if (!pci_is_pcie(dev))
-+ return 0;
-+
-+ mps = PCIE_CORE_MPS_UNIT_BYTE << *(u8 *)data;
-+ pcie_set_mps(dev, mps);
-+
-+ return 0;
-+}
-+
-+static void advk_pcie_configure_mps(struct pci_bus *bus, struct advk_pcie *pcie)
-+{
-+ u8 smpss = PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ;
-+ u32 reg;
-+
-+ /* Find the minimal supported MAX payload size */
-+ advk_pcie_find_smpss(bus->self, &smpss);
-+ pci_walk_bus(bus, advk_pcie_find_smpss, &smpss);
-+
-+ /* Configure RC MAX payload size */
-+ reg = advk_readl(pcie, PCIE_CORE_DEV_CTRL_STATS_REG);
-+ reg &= ~PCI_EXP_DEVCTL_PAYLOAD;
-+ reg |= smpss << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT;
-+ advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
-+
-+ /* Configure device MAX payload size */
-+ advk_pcie_bus_configure_mps(bus->self, &smpss);
-+ pci_walk_bus(bus, advk_pcie_bus_configure_mps, &smpss);
-+}
-+
- static int advk_pcie_probe(struct platform_device *pdev)
- {
- struct device *dev = &pdev->dev;
-@@ -960,6 +1015,9 @@ static int advk_pcie_probe(struct platfo
- list_for_each_entry(child, &bus->children, node)
- pcie_bus_configure_settings(child);
-
-+ /* Configure the MAX pay load size */
-+ advk_pcie_configure_mps(bus, pcie);
-+
- pci_bus_add_devices(bus);
- return 0;
- }
diff --git a/target/linux/mvebu/patches-4.14/526-PCI-aardvark-disable-LOS-state-by-default.patch b/target/linux/mvebu/patches-4.14/526-PCI-aardvark-disable-LOS-state-by-default.patch
deleted file mode 100644
index 0ee4af4e8d..0000000000
--- a/target/linux/mvebu/patches-4.14/526-PCI-aardvark-disable-LOS-state-by-default.patch
+++ /dev/null
@@ -1,55 +0,0 @@
-From patchwork Thu Sep 28 12:58:36 2017
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v2,5/7] PCI: aardvark: disable LOS state by default
-X-Patchwork-Submitter: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-X-Patchwork-Id: 819590
-Message-Id: <20170928125838.11887-6-thomas.petazzoni@free-electrons.com>
-To: Bjorn Helgaas <bhelgaas@google.com>, linux-pci@vger.kernel.org
-Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
- Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory Clement
- <gregory.clement@free-electrons.com>,
- Nadav Haklai <nadavh@marvell.com>, Hanna Hawa <hannah@marvell.com>,
- Yehuda Yitschak <yehuday@marvell.com>,
- linux-arm-kernel@lists.infradead.org, Antoine Tenart
- <antoine.tenart@free-electrons.com>, =?utf-8?q?Miqu=C3=A8l_Raynal?=
- <miquel.raynal@free-electrons.com>, Victor Gu <xigu@marvell.com>,
- Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Thu, 28 Sep 2017 14:58:36 +0200
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-List-Id: <linux-pci.vger.kernel.org>
-
-From: Victor Gu <xigu@marvell.com>
-
-Some PCIe devices do not support LOS, and will cause timeouts if the
-root complex forces the LOS state. This patch disables the LOS state
-by default.
-
-This is part of fixing bug
-https://bugzilla.kernel.org/show_bug.cgi?id=196339, this commit was
-reported as the user to be important to get a Intel 7260 mini-PCIe
-WiFi card working.
-
-Fixes: 8c39d710363c1 ("PCI: aardvark: Add Aardvark PCI host controller driver")
-Signed-off-by: Victor Gu <xigu@marvell.com>
-Reviewed-by: Evan Wang <xswang@marvell.com>
-Reviewed-by: Nadav Haklai <nadavh@marvell.com>
-[Thomas: tweak commit log.]
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- drivers/pci/host/pci-aardvark.c | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/drivers/pci/host/pci-aardvark.c
-+++ b/drivers/pci/host/pci-aardvark.c
-@@ -368,8 +368,7 @@ static void advk_pcie_setup_hw(struct ad
-
- advk_pcie_wait_for_link(pcie);
-
-- reg = PCIE_CORE_LINK_L0S_ENTRY |
-- (1 << PCIE_CORE_LINK_WIDTH_SHIFT);
-+ reg = (1 << PCIE_CORE_LINK_WIDTH_SHIFT);
- advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
-
- reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
diff --git a/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch b/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch
deleted file mode 100644
index fb57f4112a..0000000000
--- a/target/linux/mvebu/patches-4.14/527-PCI-aardvark-allow-to-specify-link-capability.patch
+++ /dev/null
@@ -1,43 +0,0 @@
-From f70b629e488cc3f2a325ac35476f4f7ae502c5d0 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Thu, 14 Jun 2018 14:24:40 +0200
-Subject: [PATCH 1/2] PCI: aardvark: allow to specify link capability
-
-Use DT of_pci_get_max_link_speed() facility to allow specifying link
-capability. If none or unspecified value is given it falls back to gen2,
-which is default for Armada 3700 SoC.
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- drivers/pci/host/pci-aardvark.c | 11 +++++++++--
- 1 file changed, 9 insertions(+), 2 deletions(-)
-
---- a/drivers/pci/host/pci-aardvark.c
-+++ b/drivers/pci/host/pci-aardvark.c
-@@ -272,6 +272,8 @@ static void advk_pcie_set_ob_win(struct
-
- static void advk_pcie_setup_hw(struct advk_pcie *pcie)
- {
-+ struct device *dev = &pcie->pdev->dev;
-+ struct device_node *node = dev->of_node;
- u32 reg;
- int i;
-
-@@ -311,10 +313,15 @@ static void advk_pcie_setup_hw(struct ad
- PCIE_CORE_CTRL2_TD_ENABLE;
- advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
-
-- /* Set GEN2 */
-+ /* Set GEN */
- reg = advk_readl(pcie, PCIE_CORE_CTRL0_REG);
- reg &= ~PCIE_GEN_SEL_MSK;
-- reg |= SPEED_GEN_2;
-+ if (of_pci_get_max_link_speed(node) == 1)
-+ reg |= SPEED_GEN_1;
-+ else if (of_pci_get_max_link_speed(node) == 3)
-+ reg |= SPEED_GEN_3;
-+ else
-+ reg |= SPEED_GEN_2;
- advk_writel(pcie, reg, PCIE_CORE_CTRL0_REG);
-
- /* Set lane X1 */
diff --git a/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch b/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch
deleted file mode 100644
index 5ff9b47268..0000000000
--- a/target/linux/mvebu/patches-4.14/528-arm64-dts-armada-3720-espressobin-set-max-link-to-ge.patch
+++ /dev/null
@@ -1,73 +0,0 @@
-From 33f8fdcedb01680427328d710594facef7a0092c Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Thu, 14 Jun 2018 14:40:26 +0200
-Subject: [PATCH 2/2] arm64: dts: armada-3720-espressobin: set max link to gen1
-
-Since the beginning there's been an issue with initializing the Atheros
-based MiniPCIe wireless cards. Here's an example of kerenel log:
-
- OF: PCI: host bridge /soc/pcie@d0070000 ranges:
- OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
- OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000
- advk-pcie d0070000.pcie: link up
- advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [bus 00-ff]
- pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff]
- pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff])
- pci 0000:00:00.0: BAR 0: assigned [mem0xe8000000-0xe801ffff 64bit]
- pci 0000:00:00.0: BAR 6: assigned [mem0xe8020000-0xe802ffff pref]
- [...]
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x44
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4
- ath9k 0000:00:00.0: enabling device (0000 -> 0002)
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x3c
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0xc
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x40
- ath9k 0000:00:00.0: request_irq failed
- advk-pcie d0070000.pcie: Posted PIO Response Status: CA,0xe00 @ 0x4
- ath9k: probe of 0000:00:00.0 failed with error -22
-
-The same happens for ath5k cards, while ath10k card didn't appear at
-all (not detected):
-
- OF: PCI: host bridge /soc/pcie@d0070000 ranges:
- OF: PCI: MEM 0xe8000000..0xe8ffffff -> 0xe8000000
- OF: PCI: IO 0xe9000000..0xe900ffff -> 0xe9000000
- advk-pcie d0070000.pcie: link never came up
- advk-pcie d0070000.pcie: PCI host bridge to bus 0000:00
- pci_bus 0000:00: root bus resource [bus 00-ff]
- pci_bus 0000:00: root bus resource [mem0xe8000000-0xe8ffffff]
- pci_bus 0000:00: root bus resource [io 0x0000-0xffff](bus address [0xe9000000-0xe900ffff])
- advk-pcie d0070000.pcie: config read/write timed out
-
-Following the issue on esppressobin.net forum [1] the workaround seems
-to be limiting the speed of PCIe bridge to 1st generation. This fixed
-the initialisation of all tested Atheros wireless cards.
-The patch in the forum thread swaped registers which would limit speed
-for all Armada 3700 based boards. The approach in this patch, in
-conjunction with "PCI: aardvark: allow to specify link capability" patch
-is less invasive, it only touches the affected board.
-
-For the record, the iwlwifi and mt76 cards were not affected by this
-issue.
-
-1. http://espressobin.net/forums/topic/which-pcie-wlan-cards-are-supported
-
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
----
- arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts | 2 ++
- 1 file changed, 2 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-3720-espressobin.dts
-@@ -79,6 +79,8 @@
- /* J9 */
- &pcie0 {
- status = "okay";
-+
-+ max-link-speed = <1>;
- };
-
- /* J6 */