aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu')
-rw-r--r--target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts53
1 files changed, 22 insertions, 31 deletions
diff --git a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts
index 6b8a964ab3..4d2760eb72 100644
--- a/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts
+++ b/target/linux/mvebu/files/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts
@@ -42,7 +42,7 @@
gpio_fan {
gpios = <&gpio0 13 GPIO_ACTIVE_HIGH
- &gpio0 14 GPIO_ACTIVE_HIGH>;
+ &gpio0 14 GPIO_ACTIVE_HIGH>;
alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
@@ -50,22 +50,9 @@
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-0 = <&pmx_hdd_present &pmx_buttons>;
+ pinctrl-0 = <&pmx_buttons>;
pinctrl-names = "default";
- hdd1-present {
- label = "HDD1 Present";
- linux,code = <KEY_PROG1>;
- gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
- };
-
- hdd2-present {
- label = "HDD2 Present";
- linux,code = <KEY_PROG2>;
- gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
-
- };
-
power {
label = "Power Switch";
linux,code = <KEY_POWER>;
@@ -75,7 +62,7 @@
function {
label = "Function Button";
- linux,code = <KEY_OPTION>;
+ linux,code = <KEY_CONFIG>;
gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
};
};
@@ -131,11 +118,11 @@
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>;
-
pinctrl-names = "default";
- usb_v5_regulator: usb-v5-regulator {
+ usb_power: regulator@0 {
compatible = "regulator-fixed";
+ reg = <0>;
regulator-name = "USB";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
@@ -145,7 +132,7 @@
gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>;
};
- ata1_regulator: ata1-regulator {
+ sata1_power: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "HDD1";
@@ -158,7 +145,7 @@
gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>;
};
- ata2_regulator: ata2-regulator {
+ sata2_power: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "HDD2";
@@ -183,11 +170,13 @@
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
- phy = <&phy0>;
- phy-mode = "rgmii-id";
+ phy-handle = <&ethphy0>;
+ phy-connection-type = "rgmii-id";
};
&i2c0 {
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
clock-frequency = <100000>;
status = "okay";
@@ -201,16 +190,18 @@
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
- phy0: ethernet-phy@0 { /* Marvell 88E1518 */
+ ethphy0: ethernet-phy@0 { /* Marvell 88E1518 */
reg = <0>;
- /* LED2 is used to inform uBoot if the power-switch was slided
- to the "off" position, and then power off the machine.
- Page 0x3, Register 0x10, bit 8:
- 0x800: LED2 off, power off the machine
- 0x900: LED2 on, boot the machine */
- marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */
- <0x3 0x11 0x1 0x4401>, /* LED polarity */
- <0x3 0x12 0x1 0x4905>; /* LED Timer */
+ /*
+ * LED2 is used to inform, at restart time, if the power
+ * switch was slided to the "off" position.
+ * Page 0x3, Register 0x10, bits 8-11:
+ * 0x800: LED2 off, power off the machine
+ * 0x900: LED2 on, boot the machine
+ */
+ marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED function */
+ <0x3 0x11 0x1 0x4401>, /* LED polarity */
+ <0x3 0x12 0x1 0x4905>; /* LED timer */
};
};