diff options
Diffstat (limited to 'target/linux/mvebu')
21 files changed, 0 insertions, 2460 deletions
diff --git a/target/linux/mvebu/config-3.19 b/target/linux/mvebu/config-3.19 deleted file mode 100644 index fe02c4d486..0000000000 --- a/target/linux/mvebu/config-3.19 +++ /dev/null @@ -1,343 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_TICK_BROADCAST=y -CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_ARCH_MULTIPLATFORM=y -# CONFIG_ARCH_MULTI_CPU_AUTO is not set -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_MVEBU=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_REQUIRE_GPIOLIB=y -# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set -# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_ARM=y -CONFIG_ARMADA_370_CLK=y -CONFIG_ARMADA_370_XP_TIMER=y -CONFIG_ARMADA_38X_CLK=y -CONFIG_ARMADA_XP_CLK=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ATAG_DTB_COMPAT=y -# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set -CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y -CONFIG_ARM_CPU_SUSPEND=y -CONFIG_ARM_ERRATA_720789=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -# CONFIG_ARM_LPAE is not set -CONFIG_ARM_MVEBU_V7_CPUIDLE=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -CONFIG_ARM_THUMB=y -# CONFIG_ARM_THUMBEE is not set -CONFIG_ARM_VIRT_EXT=y -CONFIG_ASYNC_TX_ENABLE_CHANNEL_SWITCH=y -CONFIG_ATAGS=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_FEROCEON_L2 is not set -CONFIG_CACHE_L2X0=y -CONFIG_CACHE_PL310=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLKSRC_OF=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_COMMON_CLK=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -# CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -# CONFIG_CPU_FREQ_STAT_DETAILS is not set -CONFIG_CPU_HAS_ASID=y -# CONFIG_CPU_ICACHE_DISABLE is not set -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PJ4B=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -# CONFIG_CPU_THERMAL is not set -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_XZ=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_LL_INCLUDE="debug/8250.S" -CONFIG_DEBUG_MVEBU_UART=y -# CONFIG_DEBUG_MVEBU_UART_ALTERNATE is not set -CONFIG_DEBUG_UART_8250=y -# CONFIG_DEBUG_UART_8250_FLOW_CONTROL is not set -CONFIG_DEBUG_UART_8250_SHIFT=2 -# CONFIG_DEBUG_UART_8250_WORD is not set -CONFIG_DEBUG_UART_PHYS=0xd0012000 -# CONFIG_DEBUG_UART_PL01X is not set -CONFIG_DEBUG_UART_VIRT=0xfec12000 -CONFIG_DEBUG_UNCOMPRESS=y -CONFIG_DEBUG_USER=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_ENGINE_RAID=y -CONFIG_DMA_OF=y -CONFIG_DTC=y -# CONFIG_DW_DMAC_CORE is not set -# CONFIG_DW_DMAC_PCI is not set -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FRAME_POINTER=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IO=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MVEBU=y -CONFIG_GPIO_MVEBU_PWM=y -CONFIG_GPIO_SYSFS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_HAVE_ARCH_PFN_VALID=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_ARM_SCU=y -CONFIG_HAVE_ARM_TWD=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_HAVE_DEBUG_KMEMLEAK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_HAVE_IDE=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_LZ4=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_NET_DSA=y -CONFIG_HAVE_OPROFILE=y -CONFIG_HAVE_PERF_EVENTS=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_PROC_CPU=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_SMP=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_UID16=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HZ_FIXED=0 -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IOMMU_HELPER=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_DEBUG=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -# CONFIG_IWMMXT is not set -CONFIG_LEDS_GPIO=y -CONFIG_LIBFDT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MACH_ARMADA_370=y -# CONFIG_MACH_ARMADA_375 is not set -CONFIG_MACH_ARMADA_38X=y -CONFIG_MACH_ARMADA_XP=y -# CONFIG_MACH_DOVE is not set -CONFIG_MACH_MVEBU_ANY=y -CONFIG_MACH_MVEBU_V7=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BOARDINFO=y -CONFIG_MEMORY=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGHT_HAVE_PCI=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_PXA3xx=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -# CONFIG_MTD_UBI_FASTMAP is not set -# CONFIG_MTD_UBI_GLUEBI is not set -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UIMAGE_SPLIT=y -CONFIG_MULTI_IRQ_HANDLER=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_MVEBU_CLK_COMMON=y -CONFIG_MVEBU_CLK_COREDIV=y -CONFIG_MVEBU_CLK_CPU=y -CONFIG_MVEBU_DEVBUS=y -CONFIG_MVEBU_MBUS=y -CONFIG_MVMDIO=y -CONFIG_MVNETA=y -CONFIG_MVSW61XX_PHY=y -CONFIG_MV_XOR=y -CONFIG_NEED_DMA_MAP_STATE=y -# CONFIG_NEON is not set -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NO_BOOTMEM=y -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_ADDRESS_PCI=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_MDIO=y -CONFIG_OF_MTD=y -CONFIG_OF_NET=y -CONFIG_OF_PCI=y -CONFIG_OF_PCI_IRQ=y -CONFIG_OF_RESERVED_MEM=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OUTER_CACHE=y -CONFIG_OUTER_CACHE_SYNC=y -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MVEBU=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PHYLIB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_ARMADA_370=y -CONFIG_PINCTRL_ARMADA_38X=y -CONFIG_PINCTRL_ARMADA_XP=y -CONFIG_PINCTRL_MVEBU=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PJ4B_ERRATA_4742=y -# CONFIG_PL310_ERRATA_588369 is not set -# CONFIG_PL310_ERRATA_727915 is not set -# CONFIG_PL310_ERRATA_753970 is not set -# CONFIG_PL310_ERRATA_769419 is not set -CONFIG_PLAT_ORION=y -CONFIG_PM_OPP=y -CONFIG_PWM=y -# CONFIG_PWM_FSL_FTM is not set -# CONFIG_PREEMPT_RCU is not set -CONFIG_RCU_STALL_COMMON=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_DRV_MV is not set -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_SCHED_HRTICK=y -# CONFIG_SCSI_DMA is not set -CONFIG_SERIAL_8250_DW=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -CONFIG_SOC_BUS=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_ORION=y -CONFIG_STOP_MACHINE=y -CONFIG_SWCONFIG=y -CONFIG_SWIOTLB=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_THUMB2_KERNEL is not set -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_STATS=y -CONFIG_TREE_RCU=y -CONFIG_UBIFS_FS=y -# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_XZ=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UID16=y -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_VFP=y -CONFIG_VFPv3=y -# CONFIG_XEN is not set -CONFIG_XPS=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZONE_DMA_FLAG=0 diff --git a/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch b/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch deleted file mode 100644 index 1569c709b8..0000000000 --- a/target/linux/mvebu/patches-3.19/001-build_mamba_dts.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -541,6 +541,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-db.dtb \ - armada-xp-gp.dtb \ - armada-xp-lenovo-ix4-300d.dtb \ -+ armada-xp-mamba.dtb \ - armada-xp-matrix.dtb \ - armada-xp-netgear-rn2120.dtb \ - armada-xp-openblocks-ax3-4.dtb \ diff --git a/target/linux/mvebu/patches-3.19/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch b/target/linux/mvebu/patches-3.19/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch deleted file mode 100644 index bf2006927e..0000000000 --- a/target/linux/mvebu/patches-3.19/019-mtd-nand-pxa3xx-Fix-PIO-FIFO-draining.patch +++ /dev/null @@ -1,97 +0,0 @@ -From 11aa9df4de06cc257327d783c5cb615989e87286 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Fri, 23 Jan 2015 15:18:27 +0100 -Subject: [PATCH v2 1/2] mtd: nand: pxa3xx: Fix PIO FIFO draining - -The NDDB register holds the data that are needed by the read and write -commands. - -However, during a read PIO access, the datasheet specifies that after each 32 -bits read in that register, when BCH is enabled, we have to make sure that the -RDDREQ bit is set in the NDSR register. - -This fixes an issue that was seen on the Armada 385, and presumably other mvebu -SoCs, when a read on a newly erased page would end up in the driver reporting a -timeout from the NAND. - -Cc: <stable@vger.kernel.org> # v3.14 -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> ---- - drivers/mtd/nand/pxa3xx_nand.c | 45 ++++++++++++++++++++++++++++++++++++------ - 1 file changed, 39 insertions(+), 6 deletions(-) - -diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c -index 96b0b1d27df1..e6918befb951 100644 ---- a/drivers/mtd/nand/pxa3xx_nand.c -+++ b/drivers/mtd/nand/pxa3xx_nand.c -@@ -23,6 +23,7 @@ - #include <linux/mtd/partitions.h> - #include <linux/io.h> - #include <linux/irq.h> -+#include <linux/jiffies.h> - #include <linux/slab.h> - #include <linux/of.h> - #include <linux/of_device.h> -@@ -480,6 +481,38 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask) - nand_writel(info, NDCR, ndcr | int_mask); - } - -+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len) -+{ -+ u32 *dst = (u32 *)data; -+ -+ if (info->ecc_bch) { -+ while (len--) { -+ u32 timeout; -+ -+ *dst++ = nand_readl(info, NDDB); -+ -+ /* -+ * According to the datasheet, when reading -+ * from NDDB with BCH enabled, after each 32 -+ * bits reads, we have to make sure that the -+ * NDSR.RDDREQ bit is set -+ */ -+ timeout = jiffies + msecs_to_jiffies(5); -+ while (!(nand_readl(info, NDSR) & NDSR_RDDREQ)) { -+ if (!time_before(jiffies, timeout)) { -+ dev_err(&info->pdev->dev, -+ "Timeout on RDDREQ while draining the FIFO\n"); -+ return; -+ } -+ -+ cpu_relax(); -+ } -+ } -+ } else { -+ __raw_readsl(info->mmio_base + NDDB, data, len); -+ } -+} -+ - static void handle_data_pio(struct pxa3xx_nand_info *info) - { - unsigned int do_bytes = min(info->data_size, info->chunk_size); -@@ -496,14 +529,14 @@ static void handle_data_pio(struct pxa3xx_nand_info *info) - DIV_ROUND_UP(info->oob_size, 4)); - break; - case STATE_PIO_READING: -- __raw_readsl(info->mmio_base + NDDB, -- info->data_buff + info->data_buff_pos, -- DIV_ROUND_UP(do_bytes, 4)); -+ drain_fifo(info, -+ info->data_buff + info->data_buff_pos, -+ DIV_ROUND_UP(do_bytes, 4)); - - if (info->oob_size > 0) -- __raw_readsl(info->mmio_base + NDDB, -- info->oob_buff + info->oob_buff_pos, -- DIV_ROUND_UP(info->oob_size, 4)); -+ drain_fifo(info, -+ info->oob_buff + info->oob_buff_pos, -+ DIV_ROUND_UP(info->oob_size, 4)); - break; - default: - dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__, --- -2.2.2 - diff --git a/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch b/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch deleted file mode 100644 index 7e27ae2b41..0000000000 --- a/target/linux/mvebu/patches-3.19/020-ARM-mvebu-Add-a-number-of-pinctrl-functions.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 91b4c91f919abffa72cbf7545a944252f8e4f775 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Thu, 8 Jan 2015 18:38:08 +0100 -Subject: [PATCH 3/4] ARM: mvebu: Add a number of pinctrl functions - -Some pinctrl functions can be shared with all DTS out there, since they are -generic, SoC-wide muxing options. Add a number of these to the DTSI to avoid -duplication. - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> -Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - arch/arm/boot/dts/armada-38x.dtsi | 39 +++++++++++++++++++++++++++++++++++++++ - 1 file changed, 39 insertions(+) - -diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi -index 40200084c6c8..98885c58be29 100644 ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -195,6 +195,45 @@ - - pinctrl@18000 { - reg = <0x18000 0x20>; -+ -+ ge0_rgmii_pins: ge-rgmii-pins-0 { -+ marvell,pins = "mpp6", "mpp7", "mpp8", -+ "mpp9", "mpp10", "mpp11", -+ "mpp12", "mpp13", "mpp14", -+ "mpp15", "mpp16", "mpp17"; -+ marvell,function = "ge0"; -+ }; -+ -+ i2c0_pins: i2c-pins-0 { -+ marvell,pins = "mpp2", "mpp3"; -+ marvell,function = "i2c0"; -+ }; -+ -+ mdio_pins: mdio-pins { -+ marvell,pins = "mpp4", "mpp5"; -+ marvell,function = "ge"; -+ }; -+ -+ ref_clk0_pins: ref-clk-pins-0 { -+ marvell,pins = "mpp45"; -+ marvell,function = "ref"; -+ }; -+ -+ spi1_pins: spi-pins-1 { -+ marvell,pins = "mpp56", "mpp57", "mpp58", -+ "mpp59"; -+ marvell,function = "spi1"; -+ }; -+ -+ uart0_pins: uart-pins-0 { -+ marvell,pins = "mpp0", "mpp1"; -+ marvell,function = "ua0"; -+ }; -+ -+ uart1_pins: uart-pins-1 { -+ marvell,pins = "mpp19", "mpp20"; -+ marvell,function = "ua1"; -+ }; - }; - - gpio0: gpio@18100 { --- -2.2.1 - diff --git a/target/linux/mvebu/patches-3.19/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch b/target/linux/mvebu/patches-3.19/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch deleted file mode 100644 index a40c957fb3..0000000000 --- a/target/linux/mvebu/patches-3.19/021-ARM-mvebu-Add-Armada-385-Access-Point-Development-Bo.patch +++ /dev/null @@ -1,220 +0,0 @@ -From e5ee12817e9eac891c6b2a340f64d94d9abd355f Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Thu, 8 Jan 2015 18:38:09 +0100 -Subject: [PATCH 4/4] ARM: mvebu: Add Armada 385 Access Point Development Board - support - -The A385-AP is a board produced by Marvell that holds 3 mPCIe slot, a 16MB -SPI-NOR, 3 Gigabit Ethernet ports, USB3 and NAND flash storage. - -[gregory.clement@free-electrons.com: switch the license to the dual -X11/GPL with the agreement of the author] - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - arch/arm/boot/dts/Makefile | 1 + - arch/arm/boot/dts/armada-385-db-ap.dts | 178 +++++++++++++++++++++++++++++++++ - 2 files changed, 179 insertions(+) - create mode 100644 arch/arm/boot/dts/armada-385-db-ap.dts - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index 6dc9c17f9ff5..d34837104949 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -536,6 +536,7 @@ dtb-$(CONFIG_MACH_ARMADA_375) += \ - armada-375-db.dtb - dtb-$(CONFIG_MACH_ARMADA_38X) += \ - armada-385-db.dtb \ -+ armada-385-db-ap.dtb \ - armada-385-rd.dtb - dtb-$(CONFIG_MACH_ARMADA_XP) += \ - armada-xp-axpwifiap.dtb \ -diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts -new file mode 100644 -index 000000000000..57b9119fb3e0 ---- /dev/null -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -0,0 +1,178 @@ -+/* -+ * Device Tree file for Marvell Armada 385 Access Point Development board -+ * (DB-88F6820-AP) -+ * -+ * Copyright (C) 2014 Marvell -+ * -+ * Nadav Haklai <nadavh@marvell.com> -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without -+ * any warranty of any kind, whether express or implied. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+#include "armada-385.dtsi" -+ -+#include <dt-bindings/gpio/gpio.h> -+ -+/ { -+ model = "Marvell Armada 385 Access Point Development Board"; -+ compatible = "marvell,a385-db-ap", "marvell,armada385", "marvell,armada38x"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+ stdout-path = &uart1; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x00000000 0x80000000>; /* 2GB */ -+ }; -+ -+ soc { -+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 -+ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>; -+ -+ internal-regs { -+ spi1: spi@10680 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&spi1_pins>; -+ status = "okay"; -+ -+ spi-flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "st,m25p128"; -+ reg = <0>; /* Chip select 0 */ -+ spi-max-frequency = <54000000>; -+ }; -+ }; -+ -+ i2c0: i2c@11000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c0_pins>; -+ status = "okay"; -+ -+ /* -+ * This bus is wired to two EEPROM -+ * sockets, one of which holding the -+ * board ID used by the bootloader. -+ * Erasing this EEPROM's content will -+ * brick the board. -+ * Use this bus with caution. -+ */ -+ }; -+ -+ mdio@72004 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mdio_pins>; -+ -+ phy0: ethernet-phy@1 { -+ reg = <1>; -+ }; -+ -+ phy1: ethernet-phy@4 { -+ reg = <4>; -+ }; -+ -+ phy2: ethernet-phy@6 { -+ reg = <6>; -+ }; -+ }; -+ -+ /* UART0 is exposed through the JP8 connector */ -+ uart0: serial@12000 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins>; -+ status = "okay"; -+ }; -+ -+ /* -+ * UART1 is exposed through a FTDI chip -+ * wired to the mini-USB connector -+ */ -+ uart1: serial@12100 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart1_pins>; -+ status = "okay"; -+ }; -+ -+ ethernet@30000 { -+ status = "okay"; -+ phy = <&phy2>; -+ phy-mode = "sgmii"; -+ }; -+ -+ ethernet@34000 { -+ status = "okay"; -+ phy = <&phy1>; -+ phy-mode = "sgmii"; -+ }; -+ -+ ethernet@70000 { -+ pinctrl-names = "default"; -+ -+ /* -+ * The Reference Clock 0 is used to -+ * provide a clock to the PHY -+ */ -+ pinctrl-0 = <&ge0_rgmii_pins>, <&ref_clk0_pins>; -+ status = "okay"; -+ phy = <&phy0>; -+ phy-mode = "rgmii-id"; -+ }; -+ }; -+ -+ pcie-controller { -+ status = "okay"; -+ -+ /* -+ * The three PCIe units are accessible through -+ * standard mini-PCIe slots on the board. -+ */ -+ pcie@1,0 { -+ /* Port 0, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ pcie@2,0 { -+ /* Port 1, Lane 0 */ -+ status = "okay"; -+ }; -+ -+ pcie@3,0 { -+ /* Port 2, Lane 0 */ -+ status = "okay"; -+ }; -+ }; -+ }; -+}; --- -2.2.1 - diff --git a/target/linux/mvebu/patches-3.19/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch b/target/linux/mvebu/patches-3.19/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch deleted file mode 100644 index 85a9511547..0000000000 --- a/target/linux/mvebu/patches-3.19/022-ARM-mvebu-A385-AP-Enable-the-NAND-controller.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 7eb1f09ec8e25aa2fc3f6fc5fc9405d9f917d503 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Thu, 11 Dec 2014 14:14:58 +0100 -Subject: [PATCH 1/2] ARM: mvebu: A385-AP: Enable the NAND controller - -The A385 AP has a 1GB NAND chip. Enable it. - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 13 +++++++++++++ - 1 file changed, 13 insertions(+) - -diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts -index 3a51531eb37b..02db04867d8f 100644 ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -122,6 +122,19 @@ - phy = <&phy0>; - phy-mode = "rgmii-id"; - }; -+ -+ nfc: flash@d0000 { -+ status = "okay"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ num-cs = <1>; -+ nand-ecc-strength = <4>; -+ nand-ecc-step-size = <512>; -+ marvell,nand-keep-config; -+ marvell,nand-enable-arbiter; -+ nand-on-flash-bbt; -+ }; - }; - - pcie-controller { --- -2.2.1 - diff --git a/target/linux/mvebu/patches-3.19/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch b/target/linux/mvebu/patches-3.19/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch deleted file mode 100644 index cd85d9d155..0000000000 --- a/target/linux/mvebu/patches-3.19/023-pinctrl-mvebu-a38x-Add-UART1-muxing-options.patch +++ /dev/null @@ -1,43 +0,0 @@ -From a95308d88c07e0093aedae7e64f92cb1e165f592 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Fri, 5 Dec 2014 15:44:57 +0100 -Subject: [PATCH] pinctrl: mvebu: a38x: Add UART1 muxing options - -The MPP19 and MMP20 pins also have the ability to be muxed to the uart1 -function. - -Add this case to the pinctrl driver. - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> -Acked-by: Jason Cooper <jason@lakedaemon.net> -Signed-off-by: Linus Walleij <linus.walleij@linaro.org> ---- - drivers/pinctrl/mvebu/pinctrl-armada-38x.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - -diff --git a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c -index 224c6cff6aa2..7302f66f4f19 100644 ---- a/drivers/pinctrl/mvebu/pinctrl-armada-38x.c -+++ b/drivers/pinctrl/mvebu/pinctrl-armada-38x.c -@@ -145,14 +145,16 @@ static struct mvebu_mpp_mode armada_38x_mpp_modes[] = { - MPP_VAR_FUNCTION(2, "ptp", "event_req", V_88F6810_PLUS), - MPP_VAR_FUNCTION(3, "pcie0", "clkreq", V_88F6810_PLUS), - MPP_VAR_FUNCTION(4, "sata1", "prsnt", V_88F6810_PLUS), -- MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS)), -+ MPP_VAR_FUNCTION(5, "ua0", "cts", V_88F6810_PLUS), -+ MPP_VAR_FUNCTION(6, "ua1", "rxd", V_88F6810_PLUS)), - MPP_MODE(20, - MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS), - MPP_VAR_FUNCTION(1, "ge0", "txclk", V_88F6810_PLUS), - MPP_VAR_FUNCTION(2, "ptp", "clk", V_88F6810_PLUS), - MPP_VAR_FUNCTION(3, "pcie1", "rstout", V_88F6820_PLUS), - MPP_VAR_FUNCTION(4, "sata0", "prsnt", V_88F6810_PLUS), -- MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS)), -+ MPP_VAR_FUNCTION(5, "ua0", "rts", V_88F6810_PLUS), -+ MPP_VAR_FUNCTION(6, "ua1", "txd", V_88F6810_PLUS)), - MPP_MODE(21, - MPP_VAR_FUNCTION(0, "gpio", NULL, V_88F6810_PLUS), - MPP_VAR_FUNCTION(1, "spi0", "cs1", V_88F6810_PLUS), --- -2.2.1 - diff --git a/target/linux/mvebu/patches-3.19/024-ARM-mvebu-a38x-Fix-node-names.patch b/target/linux/mvebu/patches-3.19/024-ARM-mvebu-a38x-Fix-node-names.patch deleted file mode 100644 index 7b506e75a8..0000000000 --- a/target/linux/mvebu/patches-3.19/024-ARM-mvebu-a38x-Fix-node-names.patch +++ /dev/null @@ -1,98 +0,0 @@ -From 4a25432b13090b57d257fa0ffb6712d8acf94523 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Thu, 8 Jan 2015 18:38:05 +0100 -Subject: [PATCH 1/4] ARM: mvebu: a38x: Fix node names - -Some nodes in the DTs have a reg property but no unit name in their node name. - -This contradicts the way the ePAPR defines the node names. Fix this. - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> -Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - arch/arm/boot/dts/armada-380.dtsi | 2 +- - arch/arm/boot/dts/armada-385-db.dts | 2 +- - arch/arm/boot/dts/armada-385-rd.dts | 2 +- - arch/arm/boot/dts/armada-385.dtsi | 2 +- - arch/arm/boot/dts/armada-38x.dtsi | 4 ++-- - 5 files changed, 6 insertions(+), 6 deletions(-) - -diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi -index 4173a8ab34e7..13400ce88c54 100644 ---- a/arch/arm/boot/dts/armada-380.dtsi -+++ b/arch/arm/boot/dts/armada-380.dtsi -@@ -32,7 +32,7 @@ - - soc { - internal-regs { -- pinctrl { -+ pinctrl@18000 { - compatible = "marvell,mv88f6810-pinctrl"; - reg = <0x18000 0x20>; - }; -diff --git a/arch/arm/boot/dts/armada-385-db.dts b/arch/arm/boot/dts/armada-385-db.dts -index 2aaa9d2ac284..212605ccc7b6 100644 ---- a/arch/arm/boot/dts/armada-385-db.dts -+++ b/arch/arm/boot/dts/armada-385-db.dts -@@ -74,7 +74,7 @@ - phy-mode = "rgmii-id"; - }; - -- mdio { -+ mdio@72004 { - phy0: ethernet-phy@0 { - reg = <0>; - }; -diff --git a/arch/arm/boot/dts/armada-385-rd.dts b/arch/arm/boot/dts/armada-385-rd.dts -index aaca2861dc87..74a3bfe6efd7 100644 ---- a/arch/arm/boot/dts/armada-385-rd.dts -+++ b/arch/arm/boot/dts/armada-385-rd.dts -@@ -67,7 +67,7 @@ - }; - - -- mdio { -+ mdio@72004 { - phy0: ethernet-phy@0 { - reg = <0>; - }; -diff --git a/arch/arm/boot/dts/armada-385.dtsi b/arch/arm/boot/dts/armada-385.dtsi -index 6283d7912f71..5249a4d3c207 100644 ---- a/arch/arm/boot/dts/armada-385.dtsi -+++ b/arch/arm/boot/dts/armada-385.dtsi -@@ -37,7 +37,7 @@ - - soc { - internal-regs { -- pinctrl { -+ pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; - }; -diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi -index 74391dace9e7..ada1f206028b 100644 ---- a/arch/arm/boot/dts/armada-38x.dtsi -+++ b/arch/arm/boot/dts/armada-38x.dtsi -@@ -193,7 +193,7 @@ - status = "disabled"; - }; - -- pinctrl { -+ pinctrl@18000 { - compatible = "marvell,mv88f6820-pinctrl"; - reg = <0x18000 0x20>; - }; -@@ -373,7 +373,7 @@ - status = "disabled"; - }; - -- mdio { -+ mdio@72004 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; --- -2.2.1 - diff --git a/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch b/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch deleted file mode 100644 index e55eca3e04..0000000000 --- a/target/linux/mvebu/patches-3.19/050-leds_tlc59116_document_binding.patch +++ /dev/null @@ -1,51 +0,0 @@ -Document the binding for the TLC59116 LED driver. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - .../devicetree/bindings/leds/leds-tlc59116.txt | 40 ++++++++++++++++++++++ - 1 file changed, 40 insertions(+) - create mode 100644 Documentation/devicetree/bindings/leds/leds-tlc59116.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/leds/leds-tlc59116.txt -@@ -0,0 +1,40 @@ -+LEDs connected to tcl59116 -+ -+Required properties -+- compatible: should be "ti,tlc59116" -+- #address-cells: must be 1 -+- #size-cells: must be 0 -+- reg: typically 0x68 -+ -+Each led is represented as a sub-node of the ti,,tlc59116. -+See Documentation/devicetree/bindings/leds/common.txt -+ -+LED sub-node properties: -+- reg: number of LED line, 0 to 15 -+- label: (optional) name of LED -+- linux,default-trigger : (optional) -+ -+Examples: -+ -+tlc59116@68 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "ti,tlc59116"; -+ reg = <0x68>; -+ -+ wan@0 { -+ label = "wrt1900ac:amber:wan"; -+ reg = <0x0>; -+ }; -+ -+ 2g@2 { -+ label = "wrt1900ac:white:2g"; -+ reg = <0x2>; -+ }; -+ -+ alive@9 { -+ label = "wrt1900ac:green:alive"; -+ reg = <0x9>; -+ linux,default_trigger = "heartbeat"; -+ }; -+}; diff --git a/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch b/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch deleted file mode 100644 index 6aa57a34fc..0000000000 --- a/target/linux/mvebu/patches-3.19/051-leds_tlc59116_add_driver.patch +++ /dev/null @@ -1,297 +0,0 @@ -The TLC59116 is an I2C bus controlled 16-channel LED driver. Each LED -output has its own 8-bit fixed-frequency PWM controller to control the -brightness of the LED. - -This is based on a driver from Belkin, but has been extensively -rewritten. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - drivers/leds/Kconfig | 8 ++ - drivers/leds/Makefile | 1 + - drivers/leds/leds-tlc59116.c | 252 +++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 261 insertions(+) - create mode 100644 drivers/leds/leds-tlc59116.c - ---- a/drivers/leds/Kconfig -+++ b/drivers/leds/Kconfig -@@ -457,6 +457,14 @@ config LEDS_TCA6507 - LED driver chips accessed via the I2C bus. - Driver support brightness control and hardware-assisted blinking. - -+config LEDS_TLC59116 -+ tristate "LED driver for TLC59116F controllers" -+ depends on LEDS_CLASS && I2C -+ select REGMAP_I2C -+ help -+ This option enables support for Texas Instruments TLC59116F -+ LED controller. -+ - config LEDS_MAX8997 - tristate "LED support for MAX8997 PMIC" - depends on LEDS_CLASS && MFD_MAX8997 ---- a/drivers/leds/Makefile -+++ b/drivers/leds/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_LEDS_LP8501) += leds-lp850 - obj-$(CONFIG_LEDS_LP8788) += leds-lp8788.o - obj-$(CONFIG_LEDS_LP8860) += leds-lp8860.o - obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o -+obj-$(CONFIG_LEDS_TLC59116) += leds-tlc59116.o - obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o - obj-$(CONFIG_LEDS_IPAQ_MICRO) += leds-ipaq-micro.o - obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o ---- /dev/null -+++ b/drivers/leds/leds-tlc59116.c -@@ -0,0 +1,252 @@ -+/* -+ * Copyright 2014 Belkin Inc. -+ * Copyright 2014 Andrew Lunn <andrew@lunn.ch> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; version 2 of the License. -+ */ -+ -+#include <linux/i2c.h> -+#include <linux/leds.h> -+#include <linux/module.h> -+#include <linux/of.h> -+#include <linux/regmap.h> -+#include <linux/slab.h> -+#include <linux/workqueue.h> -+ -+#define TLC59116_LEDS 16 -+ -+#define TLC59116_REG_MODE1 0x00 -+#define MODE1_RESPON_ADDR_MASK 0xF0 -+#define MODE1_NORMAL_MODE (0 << 4) -+#define MODE1_SPEED_MODE (1 << 4) -+ -+#define TLC59116_REG_MODE2 0x01 -+#define MODE2_DIM (0 << 5) -+#define MODE2_BLINK (1 << 5) -+#define MODE2_OCH_STOP (0 << 3) -+#define MODE2_OCH_ACK (1 << 3) -+ -+#define TLC59116_REG_PWM(x) (0x02 + (x)) -+ -+#define TLC59116_REG_GRPPWM 0x12 -+#define TLC59116_REG_GRPFREQ 0x13 -+ -+/* LED Driver Output State, determine the source that drives LED outputs */ -+#define TLC59116_REG_LEDOUT(x) (0x14 + ((x) >> 2)) -+#define TLC59116_LED_OFF 0x0 /* Output LOW */ -+#define TLC59116_LED_ON 0x1 /* Output HI-Z */ -+#define TLC59116_DIM 0x2 /* Dimming */ -+#define TLC59116_BLINK 0x3 /* Blinking */ -+#define LED_MASK 0x3 -+ -+#define ldev_to_led(c) container_of(c, struct tlc59116_led, ldev) -+#define work_to_led(work) container_of(work, struct tlc59116_led, work) -+ -+struct tlc59116_led { -+ bool active; -+ struct regmap *regmap; -+ unsigned int led_no; -+ struct led_classdev ldev; -+ struct work_struct work; -+}; -+ -+struct tlc59116_priv { -+ struct tlc59116_led leds[TLC59116_LEDS]; -+}; -+ -+static int -+tlc59116_set_mode(struct regmap *regmap, u8 mode) -+{ -+ int err; -+ u8 val; -+ -+ if ((mode != MODE2_DIM) && (mode != MODE2_BLINK)) -+ mode = MODE2_DIM; -+ -+ /* Configure MODE1 register */ -+ err = regmap_write(regmap, TLC59116_REG_MODE1, MODE1_NORMAL_MODE); -+ if (err) -+ return err; -+ -+ /* Configure MODE2 Reg */ -+ val = MODE2_OCH_STOP | mode; -+ -+ return regmap_write(regmap, TLC59116_REG_MODE2, val); -+} -+ -+static int -+tlc59116_set_led(struct tlc59116_led *led, u8 val) -+{ -+ struct regmap *regmap = led->regmap; -+ unsigned int i = (led->led_no % 4) * 2; -+ unsigned int addr = TLC59116_REG_LEDOUT(led->led_no); -+ unsigned int mask = LED_MASK << i; -+ -+ val = val << i; -+ -+ return regmap_update_bits(regmap, addr, mask, val); -+} -+ -+static void -+tlc59116_led_work(struct work_struct *work) -+{ -+ struct tlc59116_led *led = work_to_led(work); -+ struct regmap *regmap = led->regmap; -+ int err; -+ u8 pwm; -+ -+ pwm = TLC59116_REG_PWM(led->led_no); -+ err = regmap_write(regmap, pwm, led->ldev.brightness); -+ if (err) -+ dev_err(led->ldev.dev, "Failed setting brightness\n"); -+} -+ -+static void -+tlc59116_led_set(struct led_classdev *led_cdev, enum led_brightness value) -+{ -+ struct tlc59116_led *led = ldev_to_led(led_cdev); -+ -+ led->ldev.brightness = value; -+ schedule_work(&led->work); -+} -+ -+static void -+tlc59116_destroy_devices(struct tlc59116_priv *priv, unsigned int i) -+{ -+ while (--i >= 0) { -+ if (priv->leds[i].active) { -+ led_classdev_unregister(&priv->leds[i].ldev); -+ cancel_work_sync(&priv->leds[i].work); -+ } -+ } -+} -+ -+static int -+tlc59116_configure(struct device *dev, -+ struct tlc59116_priv *priv, -+ struct regmap *regmap) -+{ -+ unsigned int i; -+ int err = 0; -+ -+ tlc59116_set_mode(regmap, MODE2_DIM); -+ for (i = 0; i < TLC59116_LEDS; i++) { -+ struct tlc59116_led *led = &priv->leds[i]; -+ -+ if (!led->active) -+ continue; -+ -+ led->regmap = regmap; -+ led->led_no = i; -+ led->ldev.brightness_set = tlc59116_led_set; -+ led->ldev.max_brightness = LED_FULL; -+ INIT_WORK(&led->work, tlc59116_led_work); -+ err = led_classdev_register(dev, &led->ldev); -+ if (err < 0) { -+ dev_err(dev, "couldn't register LED %s\n", -+ led->ldev.name); -+ goto exit; -+ } -+ tlc59116_set_led(led, TLC59116_DIM); -+ } -+ -+ return 0; -+ -+exit: -+ tlc59116_destroy_devices(priv, i); -+ return err; -+} -+ -+static const struct regmap_config tlc59116_regmap = { -+ .reg_bits = 8, -+ .val_bits = 8, -+ .max_register = 0x1e, -+}; -+ -+static int -+tlc59116_probe(struct i2c_client *client, -+ const struct i2c_device_id *id) -+{ -+ struct tlc59116_priv *priv = i2c_get_clientdata(client); -+ struct device *dev = &client->dev; -+ struct device_node *np = client->dev.of_node, *child; -+ struct regmap *regmap; -+ int err, count, reg; -+ -+ count = of_get_child_count(np); -+ if (!count || count > TLC59116_LEDS) -+ return -EINVAL; -+ -+ if (!i2c_check_functionality(client->adapter, -+ I2C_FUNC_SMBUS_BYTE_DATA)) -+ return -EIO; -+ -+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); -+ if (!priv) -+ return -ENOMEM; -+ -+ regmap = devm_regmap_init_i2c(client, &tlc59116_regmap); -+ if (IS_ERR(regmap)) { -+ err = PTR_ERR(regmap); -+ dev_err(dev, "Failed to allocate register map: %d\n", err); -+ return err; -+ } -+ -+ i2c_set_clientdata(client, priv); -+ -+ for_each_child_of_node(np, child) { -+ err = of_property_read_u32(child, "reg", ®); -+ if (err) -+ return err; -+ if (reg < 0 || reg >= TLC59116_LEDS) -+ return -EINVAL; -+ if (priv->leds[reg].active) -+ return -EINVAL; -+ priv->leds[reg].active = true; -+ priv->leds[reg].ldev.name = -+ of_get_property(child, "label", NULL) ? : child->name; -+ priv->leds[reg].ldev.default_trigger = -+ of_get_property(child, "linux,default-trigger", NULL); -+ } -+ return tlc59116_configure(dev, priv, regmap); -+} -+ -+static int -+tlc59116_remove(struct i2c_client *client) -+{ -+ struct tlc59116_priv *priv = i2c_get_clientdata(client); -+ -+ tlc59116_destroy_devices(priv, TLC59116_LEDS); -+ -+ return 0; -+} -+ -+static const struct of_device_id of_tlc59116_leds_match[] = { -+ { .compatible = "ti,tlc59116", }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, of_tlc59116_leds_match); -+ -+static const struct i2c_device_id tlc59116_id[] = { -+ { "tlc59116" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(i2c, tlc59116_id); -+ -+static struct i2c_driver tlc59116_driver = { -+ .driver = { -+ .name = "tlc59116", -+ .of_match_table = of_match_ptr(of_tlc59116_leds_match), -+ }, -+ .probe = tlc59116_probe, -+ .remove = tlc59116_remove, -+ .id_table = tlc59116_id, -+}; -+ -+module_i2c_driver(tlc59116_driver); -+ -+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("TLC59116 LED driver"); diff --git a/target/linux/mvebu/patches-3.19/100-find_active_root.patch b/target/linux/mvebu/patches-3.19/100-find_active_root.patch deleted file mode 100644 index 68826fc4e1..0000000000 --- a/target/linux/mvebu/patches-3.19/100-find_active_root.patch +++ /dev/null @@ -1,153 +0,0 @@ -The WRT1900AC among other Linksys routers uses a dual-firmware layout. -The bootloader passes the active rootfs in bootargs and also sets the -rootfstype to jffs2 - which is clearly something we don't want. - -Rename both root= and rootfstype= variables to avoid issues and also -use the former to dynamically rename the active partition to "ubi". - - -Signed-off-by: Imre Kaloz <kaloz@openwrt.org> - ---- a/arch/arm/boot/compressed/atags_to_fdt.c -+++ b/arch/arm/boot/compressed/atags_to_fdt.c -@@ -66,6 +66,18 @@ static uint32_t get_cell_size(const void - return cell_size; - } - -+static void mangle_bootargs(void *fdt, const char *fdt_cmdline) -+{ -+ char *rootdev; -+ char *rootfs; -+ -+ rootdev = strstr(fdt_cmdline, "root=/dev/mtdblock"); -+ strncpy(rootdev, "uboot_active_root=", 18); -+ -+ rootfs = strstr(fdt_cmdline, "rootfstype"); -+ strncpy(rootfs, "origfstype", 10); -+} -+ - static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline) - { - char cmdline[COMMAND_LINE_SIZE]; -@@ -135,6 +147,9 @@ int atags_to_fdt(void *atag_list, void * - - for_each_tag(atag, atag_list) { - if (atag->hdr.tag == ATAG_CMDLINE) { -+ /* Rename the original root= and rootfstype= options */ -+ mangle_bootargs(fdt, -+ atag->u.cmdline.cmdline); - /* Append the ATAGS command line to the device tree - * command line. - * NB: This means that if the same parameter is set in ---- a/arch/arm/boot/compressed/string.c -+++ b/arch/arm/boot/compressed/string.c -@@ -111,6 +111,53 @@ char *strchr(const char *s, int c) - return (char *)s; - } - -+/** -+ * strncpy - Copy a length-limited, %NUL-terminated string -+ * @dest: Where to copy the string to -+ * @src: Where to copy the string from -+ * @count: The maximum number of bytes to copy -+ * -+ * The result is not %NUL-terminated if the source exceeds -+ * @count bytes. -+ * -+ * In the case where the length of @src is less than that of -+ * count, the remainder of @dest will be padded with %NUL. -+ * -+ */ -+char *strncpy(char *dest, const char *src, size_t count) -+{ -+ char *tmp = dest; -+ -+ while (count) { -+ if ((*tmp = *src) != 0) -+ src++; -+ tmp++; -+ count--; -+ } -+ return dest; -+} -+ -+/** -+ * strstr - Find the first substring in a %NUL terminated string -+ * @s1: The string to be searched -+ * @s2: The string to search for -+ */ -+char *strstr(const char *s1, const char *s2) -+{ -+ size_t l1, l2; -+ -+ l2 = strlen(s2); -+ if (!l2) -+ return (char *)s1; -+ l1 = strlen(s1); -+ while (l1 >= l2) { -+ l1--; -+ if (!memcmp(s1, s2, l2)) -+ return (char *)s1; -+ s1++; -+ } -+ return NULL; -+} - #undef memset - - void *memset(void *s, int c, size_t count) ---- a/drivers/mtd/ofpart.c -+++ b/drivers/mtd/ofpart.c -@@ -25,12 +25,15 @@ static bool node_has_compatible(struct d - return of_get_property(pp, "compatible", NULL); - } - -+static int uboot_active_root; -+ - static int parse_ofpart_partitions(struct mtd_info *master, - struct mtd_partition **pparts, - struct mtd_part_parser_data *data) - { - struct device_node *node; - const char *partname; -+ const char *owrtpart = "ubi"; - struct device_node *pp; - int nr_parts, i; - -@@ -78,9 +81,15 @@ static int parse_ofpart_partitions(struc - (*pparts)[i].offset = of_read_number(reg, a_cells); - (*pparts)[i].size = of_read_number(reg + a_cells, s_cells); - -- partname = of_get_property(pp, "label", &len); -- if (!partname) -- partname = of_get_property(pp, "name", &len); -+ if (uboot_active_root && (i == uboot_active_root)) { -+ partname = owrtpart; -+ } else { -+ partname = of_get_property(pp, "label", &len); -+ -+ if (!partname) -+ partname = of_get_property(pp, "name", &len); -+ } -+ - (*pparts)[i].name = partname; - - if (of_get_property(pp, "read-only", &len)) -@@ -178,6 +187,18 @@ static int __init ofpart_parser_init(voi - return 0; - } - -+static int __init active_root(char *str) -+{ -+ get_option(&str, &uboot_active_root); -+ -+ if (!uboot_active_root) -+ return 1; -+ -+ return 1; -+} -+ -+__setup("uboot_active_root=", active_root); -+ - static void __exit ofpart_parser_exit(void) - { - deregister_mtd_parser(&ofpart_parser); diff --git a/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch b/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch deleted file mode 100644 index 02e913e30b..0000000000 --- a/target/linux/mvebu/patches-3.19/102-revert_i2c_delay.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/arm/boot/dts/armada-xp.dtsi -+++ b/arch/arm/boot/dts/armada-xp.dtsi -@@ -54,12 +54,10 @@ - }; - - i2c0: i2c@11000 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - i2c1: i2c@11100 { -- compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - diff --git a/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch b/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch deleted file mode 100644 index 844df4f6f5..0000000000 --- a/target/linux/mvebu/patches-3.19/200-gpio_mvebu_checkpatch_fixes.patch +++ /dev/null @@ -1,223 +0,0 @@ -Wrap some long lines. -Prefer seq_puts() over seq_printf(). -space to tab conversions. -Spelling error fix. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - drivers/gpio/gpio-mvebu.c | 77 ++++++++++++++++++++++++++--------------------- - 1 file changed, 42 insertions(+), 35 deletions(-) - ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -59,7 +59,7 @@ - #define GPIO_LEVEL_MASK_OFF 0x001c - - /* The MV78200 has per-CPU registers for edge mask and level mask */ --#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) -+#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18) - #define GPIO_LEVEL_MASK_MV78200_OFF(cpu) ((cpu) ? 0x34 : 0x1C) - - /* The Armada XP has per-CPU registers for interrupt cause, interrupt -@@ -69,11 +69,11 @@ - #define GPIO_EDGE_MASK_ARMADAXP_OFF(cpu) (0x10 + (cpu) * 0x4) - #define GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu) (0x20 + (cpu) * 0x4) - --#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 --#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 -+#define MVEBU_GPIO_SOC_VARIANT_ORION 0x1 -+#define MVEBU_GPIO_SOC_VARIANT_MV78200 0x2 - #define MVEBU_GPIO_SOC_VARIANT_ARMADAXP 0x3 - --#define MVEBU_MAX_GPIO_PER_BANK 32 -+#define MVEBU_MAX_GPIO_PER_BANK 32 - - struct mvebu_gpio_chip { - struct gpio_chip chip; -@@ -82,9 +82,9 @@ struct mvebu_gpio_chip { - void __iomem *percpu_membase; - int irqbase; - struct irq_domain *domain; -- int soc_variant; -+ int soc_variant; - -- /* Used to preserve GPIO registers accross suspend/resume */ -+ /* Used to preserve GPIO registers across suspend/resume */ - u32 out_reg; - u32 io_conf_reg; - u32 blink_en_reg; -@@ -107,7 +107,8 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_BLINK_EN_OFF; - } - --static inline void __iomem *mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_io_conf(struct mvebu_gpio_chip *mvchip) - { - return mvchip->membase + GPIO_IO_CONF_OFF; - } -@@ -117,12 +118,14 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_IN_POL_OFF; - } - --static inline void __iomem *mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_data_in(struct mvebu_gpio_chip *mvchip) - { - return mvchip->membase + GPIO_DATA_IN_OFF; - } - --static inline void __iomem *mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_edge_cause(struct mvebu_gpio_chip *mvchip) - { - int cpu; - -@@ -132,13 +135,15 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_EDGE_CAUSE_OFF; - case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: - cpu = smp_processor_id(); -- return mvchip->percpu_membase + GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); -+ return mvchip->percpu_membase + -+ GPIO_EDGE_CAUSE_ARMADAXP_OFF(cpu); - default: - BUG(); - } - } - --static inline void __iomem *mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip) -+static inline void __iomem * -+mvebu_gpioreg_edge_mask(struct mvebu_gpio_chip *mvchip) - { - int cpu; - -@@ -150,7 +155,8 @@ static inline void __iomem *mvebu_gpiore - return mvchip->membase + GPIO_EDGE_MASK_MV78200_OFF(cpu); - case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: - cpu = smp_processor_id(); -- return mvchip->percpu_membase + GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); -+ return mvchip->percpu_membase + -+ GPIO_EDGE_MASK_ARMADAXP_OFF(cpu); - default: - BUG(); - } -@@ -168,7 +174,8 @@ static void __iomem *mvebu_gpioreg_level - return mvchip->membase + GPIO_LEVEL_MASK_MV78200_OFF(cpu); - case MVEBU_GPIO_SOC_VARIANT_ARMADAXP: - cpu = smp_processor_id(); -- return mvchip->percpu_membase + GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); -+ return mvchip->percpu_membase + -+ GPIO_LEVEL_MASK_ARMADAXP_OFF(cpu); - default: - BUG(); - } -@@ -364,22 +371,22 @@ static void mvebu_gpio_level_irq_unmask( - * value of the line or the opposite value. - * - * Level IRQ handlers: DATA_IN is used directly as cause register. -- * Interrupt are masked by LEVEL_MASK registers. -+ * Interrupt are masked by LEVEL_MASK registers. - * Edge IRQ handlers: Change in DATA_IN are latched in EDGE_CAUSE. -- * Interrupt are masked by EDGE_MASK registers. -+ * Interrupt are masked by EDGE_MASK registers. - * Both-edge handlers: Similar to regular Edge handlers, but also swaps -- * the polarity to catch the next line transaction. -- * This is a race condition that might not perfectly -- * work on some use cases. -+ * the polarity to catch the next line transaction. -+ * This is a race condition that might not perfectly -+ * work on some use cases. - * - * Every eight GPIO lines are grouped (OR'ed) before going up to main - * cause register. - * -- * EDGE cause mask -- * data-in /--------| |-----| |----\ -- * -----| |----- ---- to main cause reg -- * X \----------------| |----/ -- * polarity LEVEL mask -+ * EDGE cause mask -+ * data-in /--------| |-----| |----\ -+ * -----| |----- ---- to main cause reg -+ * X \----------------| |----/ -+ * polarity LEVEL mask - * - ****************************************************************************/ - -@@ -394,9 +401,8 @@ static int mvebu_gpio_irq_set_type(struc - pin = d->hwirq; - - u = readl_relaxed(mvebu_gpioreg_io_conf(mvchip)) & (1 << pin); -- if (!u) { -+ if (!u) - return -EINVAL; -- } - - type &= IRQ_TYPE_SENSE_MASK; - if (type == IRQ_TYPE_NONE) -@@ -529,13 +535,13 @@ static void mvebu_gpio_dbg_show(struct s - (data_in ^ in_pol) & msk ? "hi" : "lo", - in_pol & msk ? "lo" : "hi"); - if (!((edg_msk | lvl_msk) & msk)) { -- seq_printf(s, " disabled\n"); -+ seq_puts(s, " disabled\n"); - continue; - } - if (edg_msk & msk) -- seq_printf(s, " edge "); -+ seq_puts(s, " edge "); - if (lvl_msk & msk) -- seq_printf(s, " level"); -+ seq_puts(s, " level"); - seq_printf(s, " (%s)\n", cause & msk ? "pending" : "clear "); - } - } -@@ -546,15 +552,15 @@ static void mvebu_gpio_dbg_show(struct s - static const struct of_device_id mvebu_gpio_of_match[] = { - { - .compatible = "marvell,orion-gpio", -- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, -+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ORION, - }, - { - .compatible = "marvell,mv78200-gpio", -- .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200, -+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_MV78200, - }, - { - .compatible = "marvell,armadaxp-gpio", -- .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, -+ .data = (void *) MVEBU_GPIO_SOC_VARIANT_ARMADAXP, - }, - { - /* sentinel */ -@@ -668,7 +674,8 @@ static int mvebu_gpio_probe(struct platf - else - soc_variant = MVEBU_GPIO_SOC_VARIANT_ORION; - -- mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), GFP_KERNEL); -+ mvchip = devm_kzalloc(&pdev->dev, sizeof(struct mvebu_gpio_chip), -+ GFP_KERNEL); - if (!mvchip) - return -ENOMEM; - -@@ -767,8 +774,8 @@ static int mvebu_gpio_probe(struct platf - * interrupt handlers, with each handler dealing with 8 GPIO - * pins. */ - for (i = 0; i < 4; i++) { -- int irq; -- irq = platform_get_irq(pdev, i); -+ int irq = platform_get_irq(pdev, i); -+ - if (irq < 0) - continue; - irq_set_handler_data(irq, mvchip); -@@ -827,7 +834,7 @@ static int mvebu_gpio_probe(struct platf - - static struct platform_driver mvebu_gpio_driver = { - .driver = { -- .name = "mvebu-gpio", -+ .name = "mvebu-gpio", - .of_match_table = mvebu_gpio_of_match, - }, - .probe = mvebu_gpio_probe, diff --git a/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch b/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch deleted file mode 100644 index aecf8e3c12..0000000000 --- a/target/linux/mvebu/patches-3.19/201-gpio_mvebu_fix_probe_cleanup_on_error.patch +++ /dev/null @@ -1,63 +0,0 @@ -Ensure that when there is an error during probe that the gpiochip is -removed and the generic irq chip is removed. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - drivers/gpio/gpio-mvebu.c | 23 +++++++++++++++++------ - 1 file changed, 17 insertions(+), 6 deletions(-) - ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -667,6 +667,7 @@ static int mvebu_gpio_probe(struct platf - unsigned int ngpios; - int soc_variant; - int i, cpu, id; -+ int err; - - match = of_match_device(mvebu_gpio_of_match, &pdev->dev); - if (match) -@@ -785,14 +786,16 @@ static int mvebu_gpio_probe(struct platf - mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1); - if (mvchip->irqbase < 0) { - dev_err(&pdev->dev, "no irqs\n"); -- return mvchip->irqbase; -+ err = mvchip->irqbase; -+ goto err_gpiochip_add; - } - - gc = irq_alloc_generic_chip("mvebu_gpio_irq", 2, mvchip->irqbase, - mvchip->membase, handle_level_irq); - if (!gc) { - dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n"); -- return -ENOMEM; -+ err = -ENOMEM; -+ goto err_gpiochip_add; - } - - gc->private = mvchip; -@@ -823,13 +826,21 @@ static int mvebu_gpio_probe(struct platf - if (!mvchip->domain) { - dev_err(&pdev->dev, "couldn't allocate irq domain %s (DT).\n", - mvchip->chip.label); -- irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, -- IRQ_LEVEL | IRQ_NOPROBE); -- kfree(gc); -- return -ENODEV; -+ err = -ENODEV; -+ goto err_generic_chip; - } - - return 0; -+ -+err_generic_chip: -+ irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, -+ IRQ_LEVEL | IRQ_NOPROBE); -+ kfree(gc); -+ -+err_gpiochip_add: -+ gpiochip_remove(&mvchip->chip); -+ -+ return err; - } - - static struct platform_driver mvebu_gpio_driver = { diff --git a/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch b/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch deleted file mode 100644 index 19376f82b5..0000000000 --- a/target/linux/mvebu/patches-3.19/202-gpio_mvebu_add_limited_pwm_support.patch +++ /dev/null @@ -1,433 +0,0 @@ -Armada 370/XP devices can 'blink' gpio lines with a configurable on -and off period. This can be modelled as a PWM. - -However, there are only two sets of PWM configuration registers for -all the gpio lines. This driver simply allows a single gpio line per -gpio chip of 32 lines to be used as a PWM. Attempts to use more return -EBUSY. - -Due to the interleaving of registers it is not simple to separate the -PWM driver from the gpio driver. Thus the gpio driver has been -extended with a PWM driver. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - drivers/gpio/Kconfig | 5 ++ - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-mvebu-pwm.c | 202 ++++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpio-mvebu.c | 37 +++----- - drivers/gpio/gpio-mvebu.h | 79 +++++++++++++++++ - 5 files changed, 299 insertions(+), 25 deletions(-) - create mode 100644 drivers/gpio/gpio-mvebu-pwm.c - create mode 100644 drivers/gpio/gpio-mvebu.h - ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -239,6 +239,11 @@ config GPIO_MVEBU - select GPIO_GENERIC - select GENERIC_IRQ_CHIP - -+config GPIO_MVEBU_PWM -+ def_bool y -+ depends on GPIO_MVEBU -+ depends on PWM -+ - config GPIO_MXC - def_bool y - depends on ARCH_MXC ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -60,6 +60,7 @@ obj-$(CONFIG_GPIO_MSIC) += gpio-msic.o - obj-$(CONFIG_GPIO_MSM_V1) += gpio-msm-v1.o - obj-$(CONFIG_GPIO_MSM_V2) += gpio-msm-v2.o - obj-$(CONFIG_GPIO_MVEBU) += gpio-mvebu.o -+obj-$(CONFIG_GPIO_MVEBU_PWM) += gpio-mvebu-pwm.o - obj-$(CONFIG_GPIO_MXC) += gpio-mxc.o - obj-$(CONFIG_GPIO_MXS) += gpio-mxs.o - obj-$(CONFIG_GPIO_OCTEON) += gpio-octeon.o ---- /dev/null -+++ b/drivers/gpio/gpio-mvebu-pwm.c -@@ -0,0 +1,202 @@ -+#include <linux/err.h> -+#include <linux/module.h> -+#include <linux/gpio.h> -+#include <linux/pwm.h> -+#include <linux/clk.h> -+#include <linux/platform_device.h> -+#include "gpio-mvebu.h" -+#include "gpiolib.h" -+ -+static void __iomem *mvebu_gpioreg_blink_select(struct mvebu_gpio_chip *mvchip) -+{ -+ return mvchip->membase + GPIO_BLINK_CNT_SELECT; -+} -+ -+static inline struct mvebu_pwm *to_mvebu_pwm(struct pwm_chip *chip) -+{ -+ return container_of(chip, struct mvebu_pwm, chip); -+} -+ -+static inline struct mvebu_gpio_chip *to_mvchip(struct mvebu_pwm *pwm) -+{ -+ return container_of(pwm, struct mvebu_gpio_chip, pwm); -+} -+ -+static int mvebu_pwm_request(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); -+ unsigned long flags; -+ int ret = 0; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ if (pwm->used) { -+ ret = -EBUSY; -+ } else { -+ if (!desc) { -+ ret = -ENODEV; -+ goto out; -+ } -+ ret = gpiod_request(desc, "mvebu-pwm"); -+ if (ret) -+ goto out; -+ -+ ret = gpiod_direction_output(desc, 0); -+ if (ret) { -+ gpiod_free(desc); -+ goto out; -+ } -+ -+ pwm->pin = pwmd->pwm - mvchip->chip.base; -+ pwm->used = true; -+ } -+ -+out: -+ spin_unlock_irqrestore(&pwm->lock, flags); -+ return ret; -+} -+ -+static void mvebu_pwm_free(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct gpio_desc *desc = gpio_to_desc(pwmd->pwm); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&pwm->lock, flags); -+ gpiod_free(desc); -+ pwm->used = false; -+ spin_unlock_irqrestore(&pwm->lock, flags); -+} -+ -+static int mvebu_pwm_config(struct pwm_chip *chip, struct pwm_device *pwmd, -+ int duty_ns, int period_ns) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ unsigned int on, off; -+ unsigned long long val; -+ u32 u; -+ -+ val = (unsigned long long) pwm->clk_rate * duty_ns; -+ do_div(val, NSEC_PER_SEC); -+ if (val > UINT_MAX) -+ return -EINVAL; -+ if (val) -+ on = val; -+ else -+ on = 1; -+ -+ val = (unsigned long long) pwm->clk_rate * (period_ns - duty_ns); -+ do_div(val, NSEC_PER_SEC); -+ if (val > UINT_MAX) -+ return -EINVAL; -+ if (val) -+ off = val; -+ else -+ off = 1; -+ -+ u = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); -+ u &= ~(1 << pwm->pin); -+ u |= (pwm->id << pwm->pin); -+ writel_relaxed(u, mvebu_gpioreg_blink_select(mvchip)); -+ -+ writel_relaxed(on, pwm->membase + BLINK_ON_DURATION); -+ writel_relaxed(off, pwm->membase + BLINK_OFF_DURATION); -+ -+ return 0; -+} -+ -+static int mvebu_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ -+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 1); -+ -+ return 0; -+} -+ -+static void mvebu_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwmd) -+{ -+ struct mvebu_pwm *pwm = to_mvebu_pwm(chip); -+ struct mvebu_gpio_chip *mvchip = to_mvchip(pwm); -+ -+ mvebu_gpio_blink(&mvchip->chip, pwm->pin, 0); -+} -+ -+static const struct pwm_ops mvebu_pwm_ops = { -+ .request = mvebu_pwm_request, -+ .free = mvebu_pwm_free, -+ .config = mvebu_pwm_config, -+ .enable = mvebu_pwm_enable, -+ .disable = mvebu_pwm_disable, -+ .owner = THIS_MODULE, -+}; -+ -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) -+{ -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ -+ pwm->blink_select = readl_relaxed(mvebu_gpioreg_blink_select(mvchip)); -+ pwm->blink_on_duration = -+ readl_relaxed(pwm->membase + BLINK_ON_DURATION); -+ pwm->blink_off_duration = -+ readl_relaxed(pwm->membase + BLINK_OFF_DURATION); -+} -+ -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) -+{ -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ -+ writel_relaxed(pwm->blink_select, mvebu_gpioreg_blink_select(mvchip)); -+ writel_relaxed(pwm->blink_on_duration, -+ pwm->membase + BLINK_ON_DURATION); -+ writel_relaxed(pwm->blink_off_duration, -+ pwm->membase + BLINK_OFF_DURATION); -+} -+ -+/* -+ * Armada 370/XP has simple PWM support for gpio lines. Other SoCs -+ * don't have this hardware. So if we don't have the necessary -+ * resource, it is not an error. -+ */ -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id) -+{ -+ struct device *dev = &pdev->dev; -+ struct mvebu_pwm *pwm = &mvchip->pwm; -+ struct resource *res; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"); -+ if (!res) -+ return 0; -+ -+ mvchip->pwm.membase = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(mvchip->pwm.membase)) -+ return PTR_ERR(mvchip->percpu_membase); -+ -+ if (id < 0 || id > 1) -+ return -EINVAL; -+ pwm->id = id; -+ -+ if (IS_ERR(mvchip->clk)) -+ return PTR_ERR(mvchip->clk); -+ -+ pwm->clk_rate = clk_get_rate(mvchip->clk); -+ if (!pwm->clk_rate) { -+ dev_err(dev, "failed to get clock rate\n"); -+ return -EINVAL; -+ } -+ -+ pwm->chip.dev = dev; -+ pwm->chip.ops = &mvebu_pwm_ops; -+ pwm->chip.base = mvchip->chip.base; -+ pwm->chip.npwm = mvchip->chip.ngpio; -+ pwm->chip.can_sleep = false; -+ -+ spin_lock_init(&pwm->lock); -+ -+ return pwmchip_add(&pwm->chip); -+} ---- a/drivers/gpio/gpio-mvebu.c -+++ b/drivers/gpio/gpio-mvebu.c -@@ -42,10 +42,11 @@ - #include <linux/io.h> - #include <linux/of_irq.h> - #include <linux/of_device.h> -+#include <linux/pwm.h> - #include <linux/clk.h> - #include <linux/pinctrl/consumer.h> - #include <linux/irqchip/chained_irq.h> -- -+#include "gpio-mvebu.h" - /* - * GPIO unit register offsets. - */ -@@ -75,24 +76,6 @@ - - #define MVEBU_MAX_GPIO_PER_BANK 32 - --struct mvebu_gpio_chip { -- struct gpio_chip chip; -- spinlock_t lock; -- void __iomem *membase; -- void __iomem *percpu_membase; -- int irqbase; -- struct irq_domain *domain; -- int soc_variant; -- -- /* Used to preserve GPIO registers across suspend/resume */ -- u32 out_reg; -- u32 io_conf_reg; -- u32 blink_en_reg; -- u32 in_pol_reg; -- u32 edge_mask_regs[4]; -- u32 level_mask_regs[4]; --}; -- - /* - * Functions returning addresses of individual registers for a given - * GPIO controller. -@@ -228,7 +211,7 @@ static int mvebu_gpio_get(struct gpio_ch - return (u >> pin) & 1; - } - --static void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) -+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value) - { - struct mvebu_gpio_chip *mvchip = - container_of(chip, struct mvebu_gpio_chip, chip); -@@ -609,6 +592,8 @@ static int mvebu_gpio_suspend(struct pla - BUG(); - } - -+ mvebu_pwm_suspend(mvchip); -+ - return 0; - } - -@@ -652,6 +637,8 @@ static int mvebu_gpio_resume(struct plat - BUG(); - } - -+ mvebu_pwm_resume(mvchip); -+ - return 0; - } - -@@ -663,7 +650,6 @@ static int mvebu_gpio_probe(struct platf - struct resource *res; - struct irq_chip_generic *gc; - struct irq_chip_type *ct; -- struct clk *clk; - unsigned int ngpios; - int soc_variant; - int i, cpu, id; -@@ -693,10 +679,10 @@ static int mvebu_gpio_probe(struct platf - return id; - } - -- clk = devm_clk_get(&pdev->dev, NULL); -+ mvchip->clk = devm_clk_get(&pdev->dev, NULL); - /* Not all SoCs require a clock.*/ -- if (!IS_ERR(clk)) -- clk_prepare_enable(clk); -+ if (!IS_ERR(mvchip->clk)) -+ clk_prepare_enable(mvchip->clk); - - mvchip->soc_variant = soc_variant; - mvchip->chip.label = dev_name(&pdev->dev); -@@ -830,7 +816,8 @@ static int mvebu_gpio_probe(struct platf - goto err_generic_chip; - } - -- return 0; -+ /* Armada 370/XP has simple PWM support for gpio lines */ -+ return mvebu_pwm_probe(pdev, mvchip, id); - - err_generic_chip: - irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST, ---- /dev/null -+++ b/drivers/gpio/gpio-mvebu.h -@@ -0,0 +1,79 @@ -+/* -+ * Interface between MVEBU GPIO driver and PWM driver for GPIO pins -+ * -+ * Copyright (C) 2015, Andrew Lunn <andrew@lunn.ch> -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#ifndef MVEBU_GPIO_PWM_H -+#define MVEBU_GPIO_PWM_H -+ -+#define BLINK_ON_DURATION 0x0 -+#define BLINK_OFF_DURATION 0x4 -+#define GPIO_BLINK_CNT_SELECT 0x0020 -+ -+struct mvebu_pwm { -+ void __iomem *membase; -+ unsigned long clk_rate; -+ bool used; -+ unsigned pin; -+ struct pwm_chip chip; -+ int id; -+ spinlock_t lock; -+ -+ /* Used to preserve GPIO/PWM registers across suspend / -+ * resume */ -+ u32 blink_select; -+ u32 blink_on_duration; -+ u32 blink_off_duration; -+}; -+ -+struct mvebu_gpio_chip { -+ struct gpio_chip chip; -+ spinlock_t lock; -+ void __iomem *membase; -+ void __iomem *percpu_membase; -+ int irqbase; -+ struct irq_domain *domain; -+ int soc_variant; -+ struct clk *clk; -+#ifdef CONFIG_PWM -+ struct mvebu_pwm pwm; -+#endif -+ /* Used to preserve GPIO registers across suspend/resume */ -+ u32 out_reg; -+ u32 io_conf_reg; -+ u32 blink_en_reg; -+ u32 in_pol_reg; -+ u32 edge_mask_regs[4]; -+ u32 level_mask_regs[4]; -+}; -+ -+void mvebu_gpio_blink(struct gpio_chip *chip, unsigned pin, int value); -+ -+#ifdef CONFIG_PWM -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id); -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip); -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip); -+#else -+int mvebu_pwm_probe(struct platform_device *pdev, -+ struct mvebu_gpio_chip *mvchip, -+ int id) -+{ -+ return 0; -+} -+ -+void mvebu_pwm_suspend(struct mvebu_gpio_chip *mvchip) -+{ -+} -+ -+void mvebu_pwm_resume(struct mvebu_gpio_chip *mvchip) -+{ -+} -+#endif -+#endif diff --git a/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch b/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch deleted file mode 100644 index 48f93944bf..0000000000 --- a/target/linux/mvebu/patches-3.19/203-dt_bindings_extend_mvebu_gpio_documentation_with_pwm.patch +++ /dev/null @@ -1,52 +0,0 @@ -Document the optional parameters needed for PWM operation of gpio -lines. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - .../devicetree/bindings/gpio/gpio-mvebu.txt | 31 ++++++++++++++++++++++ - 1 file changed, 31 insertions(+) - ---- a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt -+++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt -@@ -38,6 +38,23 @@ Required properties: - - #gpio-cells: Should be two. The first cell is the pin number. The - second cell is reserved for flags, unused at the moment. - -+Optional properties: -+ -+In order to use the gpio lines in PWM mode, some additional optional -+properties are required. Only Armada 370 and XP supports these -+properties. -+ -+- reg: an additional register set is needed, for the GPIO Blink -+ Counter on/off registers. -+ -+- reg-names: Must contain an entry "pwm" corresponding to the -+ additional register range needed for pwm operation. -+ -+- #pwm-cells: Should be two. The first cell is the pin number. The -+ second cell is reserved for flags, unused at the moment. -+ -+- clocks: Must be a phandle to the clock for the gpio controller. -+ - Example: - - gpio0: gpio@d0018100 { -@@ -51,3 +68,17 @@ Example: - #interrupt-cells = <2>; - interrupts = <16>, <17>, <18>, <19>; - }; -+ -+ gpio1: gpio@18140 { -+ compatible = "marvell,orion-gpio"; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; -+ ngpios = <17>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ #pwm-cells = <2>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ interrupts = <87>, <88>, <89>; -+ clocks = <&coreclk 0>; -+ }; diff --git a/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch b/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch deleted file mode 100644 index 2f81504a50..0000000000 --- a/target/linux/mvebu/patches-3.19/204-mvebu_xp_add_pwm_properties_to_dtsi_files.patch +++ /dev/null @@ -1,149 +0,0 @@ -Add properties to the gpio nodes to allow them to be also used -as pwm lines. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - arch/arm/boot/dts/armada-370.dtsi | 10 ++++++++-- - arch/arm/boot/dts/armada-xp-mv78230.dtsi | 10 ++++++++-- - arch/arm/boot/dts/armada-xp-mv78260.dtsi | 8 ++++++-- - arch/arm/boot/dts/armada-xp-mv78460.dtsi | 10 ++++++++-- - 4 files changed, 30 insertions(+), 8 deletions(-) - ---- a/arch/arm/boot/dts/armada-370.dtsi -+++ b/arch/arm/boot/dts/armada-370.dtsi -@@ -123,24 +123,30 @@ - - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { ---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi -@@ -169,24 +169,30 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <17>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>; -+ clocks = <&coreclk 0>; - }; - }; - }; ---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi -@@ -253,24 +253,28 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { ---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi -+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi -@@ -291,24 +291,30 @@ - internal-regs { - gpio0: gpio@18100 { - compatible = "marvell,orion-gpio"; -- reg = <0x18100 0x40>; -+ reg = <0x18100 0x40>, <0x181c0 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <82>, <83>, <84>, <85>; -+ clocks = <&coreclk 0>; - }; - - gpio1: gpio@18140 { - compatible = "marvell,orion-gpio"; -- reg = <0x18140 0x40>; -+ reg = <0x18140 0x40>, <0x181c8 0x08>; -+ reg-names = "gpio", "pwm"; - ngpios = <32>; - gpio-controller; - #gpio-cells = <2>; -+ #pwm-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - interrupts = <87>, <88>, <89>, <90>; -+ clocks = <&coreclk 0>; - }; - - gpio2: gpio@18180 { diff --git a/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch b/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch deleted file mode 100644 index 9c46e6885d..0000000000 --- a/target/linux/mvebu/patches-3.19/205-arm_mvebu_enable_pwm_in_defconfig.patch +++ /dev/null @@ -1,18 +0,0 @@ -Now that the gpio driver also supports PWM operation, enable -the PWM framework in mvebu_v7_defconfig. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - arch/arm/configs/mvebu_v7_defconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm/configs/mvebu_v7_defconfig -+++ b/arch/arm/configs/mvebu_v7_defconfig -@@ -116,6 +116,7 @@ CONFIG_DMADEVICES=y - CONFIG_MV_XOR=y - # CONFIG_IOMMU_SUPPORT is not set - CONFIG_MEMORY=y -+CONFIG_PWM=y - CONFIG_EXT4_FS=y - CONFIG_ISO9660_FS=y - CONFIG_JOLIET=y diff --git a/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch b/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch deleted file mode 100644 index 8af5eba5b0..0000000000 --- a/target/linux/mvebu/patches-3.19/206-mvebu_wrt1900ac_use_pwm-fan_rather_than_gpio-fan.patch +++ /dev/null @@ -1,28 +0,0 @@ -The mvebu gpio driver can also perform PWM on some pins. Us the -pwm-fan driver to control the fan of the WRT1900AC, giving us fine -grain control over its speed and hence noise. - -Signed-off-by: Andrew Lunn <andrew@lunn.ch> ---- - arch/arm/boot/dts/armada-xp-wrt1900ac.dts | 8 +++----- - 1 file changed, 3 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/armada-xp-mamba.dts -+++ b/arch/arm/boot/dts/armada-xp-mamba.dts -@@ -302,13 +302,11 @@ - }; - }; - -- gpio_fan { -+ pwm_fan { - /* SUNON HA4010V4-0000-C99 */ -- compatible = "gpio-fan"; -- gpios = <&gpio0 24 0>; - -- gpio-fan,speed-map = <0 0 -- 4500 1>; -+ compatible = "pwm-fan"; -+ pwms = <&gpio0 24 4000 0>; - }; - - mvsw61xx { diff --git a/target/linux/mvebu/patches-3.19/207-armada-385-rd-mtd-partitions.patch b/target/linux/mvebu/patches-3.19/207-armada-385-rd-mtd-partitions.patch deleted file mode 100644 index 80cec30649..0000000000 --- a/target/linux/mvebu/patches-3.19/207-armada-385-rd-mtd-partitions.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/arm/boot/dts/armada-385-rd.dts -+++ b/arch/arm/boot/dts/armada-385-rd.dts -@@ -42,6 +42,16 @@ - compatible = "st,m25p128"; - reg = <0>; /* Chip select 0 */ - spi-max-frequency = <108000000>; -+ -+ partition@0 { -+ label = "uboot"; -+ reg = <0 0x400000>; -+ }; -+ -+ partition@1 { -+ label = "firmware"; -+ reg = <0x400000 0xc00000>; -+ }; - }; - }; - diff --git a/target/linux/mvebu/patches-3.19/208-ARM-mvebu-385-ap-Add-partitions.patch b/target/linux/mvebu/patches-3.19/208-ARM-mvebu-385-ap-Add-partitions.patch deleted file mode 100644 index 0c59d47956..0000000000 --- a/target/linux/mvebu/patches-3.19/208-ARM-mvebu-385-ap-Add-partitions.patch +++ /dev/null @@ -1,39 +0,0 @@ -From 9861f93a59142a3131870df2521eb2deb73026d7 Mon Sep 17 00:00:00 2001 -From: Maxime Ripard <maxime.ripard@free-electrons.com> -Date: Tue, 13 Jan 2015 11:14:09 +0100 -Subject: [PATCH 2/2] ARM: mvebu: 385-ap: Add partitions - -Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> ---- - arch/arm/boot/dts/armada-385-db-ap.dts | 15 +++++++++++++++ - 1 file changed, 15 insertions(+) - -diff --git a/arch/arm/boot/dts/armada-385-db-ap.dts b/arch/arm/boot/dts/armada-385-db-ap.dts -index 02db04867d8f..2a58443e2504 100644 ---- a/arch/arm/boot/dts/armada-385-db-ap.dts -+++ b/arch/arm/boot/dts/armada-385-db-ap.dts -@@ -134,6 +134,21 @@ - marvell,nand-keep-config; - marvell,nand-enable-arbiter; - nand-on-flash-bbt; -+ -+ mtd0@00000000 { -+ label = "u-boot"; -+ reg = <0x00000000 0x00800000>; -+ }; -+ -+ mtd1@00800000 { -+ label = "kernel"; -+ reg = <0x00800000 0x00800000>; -+ }; -+ -+ mtd2@01000000 { -+ label = "ubi"; -+ reg = <0x01000000 0x3f000000>; -+ }; - }; - }; - --- -2.2.1 - |