1 files changed, 0 insertions, 65 deletions
diff --git a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch b/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
deleted file mode 100644
index c3abae60a6..0000000000
--- a/target/linux/mvebu/patches-5.4/028-arm64-dts-mcbin-singleshot-add-heartbeat-LED.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From da57203dc7fd556fbb3f0ec7d7d7c0b0e893b386 Mon Sep 17 00:00:00 2001
-From: Tomasz Maciej Nowak <tmn505@gmail.com>
-Date: Tue, 10 Nov 2020 16:38:31 +0100
-Subject: [PATCH] arm64: dts: mcbin-singleshot: add heartbeat LED
-
-With board revision 1.3, SolidRun moved the power LED to the middle of
-the board. In old place of power LED a GPIO controllable heartbeat LED
-was added. This commit only touches Single Shot variant, since only this
-variant is all revision 1.3.
-
-Note:
-This is slightly modified patch. Some boards could be placed in an
-enclosure, so the LED18 is enabled by default, since that'll be the only
-visible indicator that the board is operating.
-
-Reported-by: Alexandra Alth <alexandra@alth.de>
-Signed-off-by: Tomasz Maciej Nowak <tmn505@gmail.com>
-Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
----
- .../marvell/armada-8040-mcbin-singleshot.dts  | 22 +++++++++++++++++++
- 1 file changed, 22 insertions(+)
-
---- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin-singleshot.dts
-@@ -5,6 +5,8 @@
-  * Device Tree file for MACCHIATOBin Armada 8040 community board platform
-  */
- 
-+#include <dt-bindings/leds/common.h>
-+
- #include "armada-8040-mcbin.dtsi"
- 
- / {
-@@ -12,6 +14,20 @@
- 	compatible = "marvell,armada8040-mcbin-singleshot",
- 			"marvell,armada8040-mcbin", "marvell,armada8040",
- 			"marvell,armada-ap806-quad", "marvell,armada-ap806";
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-0 = <&cp0_led18_pins>;
-+		pinctrl-names = "default";
-+
-+		led18 {
-+			gpios = <&cp0_gpio2 1 GPIO_ACTIVE_LOW>;
-+			function = LED_FUNCTION_HEARTBEAT;
-+			color = <LED_COLOR_ID_GREEN>;
-+			linux,default-trigger = "heartbeat";
-+			default-state = "on";
-+		};
-+	};
- };
- 
- &cp0_eth0 {
-@@ -27,3 +43,10 @@
- 	managed = "in-band-status";
- 	sfp = <&sfp_eth1>;
- };
-+
-+&cp0_pinctrl {
-+	cp0_led18_pins: led18-pins {
-+		marvell,pins = "mpp33";
-+		marvell,function = "gpio";
-+	};
-+};