aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch')
-rw-r--r--target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch1477
1 files changed, 0 insertions, 1477 deletions
diff --git a/target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch b/target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch
deleted file mode 100644
index 4abefe6236..0000000000
--- a/target/linux/mvebu/patches-4.9/417-sfp-add-phylink-based-SFP-module-support.patch
+++ /dev/null
@@ -1,1477 +0,0 @@
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 12 Sep 2015 18:43:39 +0100
-Subject: [PATCH] sfp: add phylink based SFP module support
-
-Add support for SFP hotpluggable modules via phylink. This supports
-both copper and optical SFP modules, which require different Serdes
-modes in order to properly negotiate the link.
-
-Optical SFP modules typically require the Serdes link to be talking
-1000base-X mode - this is the gigabit ethernet mode defined by the
-802.3 standard.
-
-Copper SFP modules typically integrate a PHY in the module to convert
-from Serdes to copper, and the PHY will be configured by the vendor
-to either present a 1000base-X Serdes link (for fixed 1000base-T) or
-a SGMII Serdes link. However, this is vendor defined, so we instead
-detect the PHY, switch the link to SGMII mode, and use traditional
-PHY based negotiation.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
-
-- set port and port capability depending on connector type
-- move autoneg mode setting to probe function
-- set "supported" speed capabilities depending on reported ethernet
- capabilities
-- checks for short read
-- dump eeprom base ID when checksum fails
----
- create mode 100644 drivers/net/phy/sfp.c
- create mode 100644 include/linux/sfp.h
-
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -256,6 +256,11 @@ endif # RTL8366_SMI
-
- comment "MII PHY device drivers"
-
-+config SFP
-+ tristate "SFP cage support"
-+ depends on I2C && PHYLINK
-+ select MDIO_I2C
-+
- config AMD_PHY
- tristate "AMD PHYs"
- ---help---
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -41,6 +41,8 @@ obj-$(CONFIG_MDIO_SUN4I) += mdio-sun4i.o
- obj-$(CONFIG_MDIO_THUNDER) += mdio-thunder.o
- obj-$(CONFIG_MDIO_XGENE) += mdio-xgene.o
-
-+obj-$(CONFIG_SFP) += sfp.o
-+
- obj-$(CONFIG_AMD_PHY) += amd.o
- obj-$(CONFIG_AQUANTIA_PHY) += aquantia.o
- obj-$(CONFIG_AT803X_PHY) += at803x.o
---- /dev/null
-+++ b/drivers/net/phy/sfp.c
-@@ -0,0 +1,1071 @@
-+#include <linux/delay.h>
-+#include <linux/gpio.h>
-+#include <linux/i2c.h>
-+#include <linux/interrupt.h>
-+#include <linux/jiffies.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/netdevice.h>
-+#include <linux/of.h>
-+#include <linux/of_net.h>
-+#include <linux/phylink.h>
-+#include <linux/platform_device.h>
-+#include <linux/sfp.h>
-+#include <linux/slab.h>
-+#include <linux/workqueue.h>
-+
-+#include "mdio-i2c.h"
-+#include "swphy.h"
-+
-+enum {
-+ GPIO_MODDEF0,
-+ GPIO_LOS,
-+ GPIO_TX_FAULT,
-+ GPIO_TX_DISABLE,
-+ GPIO_RATE_SELECT,
-+ GPIO_MAX,
-+
-+ SFP_F_PRESENT = BIT(GPIO_MODDEF0),
-+ SFP_F_LOS = BIT(GPIO_LOS),
-+ SFP_F_TX_FAULT = BIT(GPIO_TX_FAULT),
-+ SFP_F_TX_DISABLE = BIT(GPIO_TX_DISABLE),
-+ SFP_F_RATE_SELECT = BIT(GPIO_RATE_SELECT),
-+
-+ SFP_E_INSERT = 0,
-+ SFP_E_REMOVE,
-+ SFP_E_DEV_DOWN,
-+ SFP_E_DEV_UP,
-+ SFP_E_TX_FAULT,
-+ SFP_E_TX_CLEAR,
-+ SFP_E_LOS_HIGH,
-+ SFP_E_LOS_LOW,
-+ SFP_E_TIMEOUT,
-+
-+ SFP_MOD_EMPTY = 0,
-+ SFP_MOD_PROBE,
-+ SFP_MOD_PRESENT,
-+ SFP_MOD_ERROR,
-+
-+ SFP_DEV_DOWN = 0,
-+ SFP_DEV_UP,
-+
-+ SFP_S_DOWN = 0,
-+ SFP_S_INIT,
-+ SFP_S_WAIT_LOS,
-+ SFP_S_LINK_UP,
-+ SFP_S_TX_FAULT,
-+ SFP_S_REINIT,
-+ SFP_S_TX_DISABLE,
-+};
-+
-+static const char *gpio_of_names[] = {
-+ "moddef0",
-+ "los",
-+ "tx-fault",
-+ "tx-disable",
-+ "rate-select",
-+};
-+
-+static const enum gpiod_flags gpio_flags[] = {
-+ GPIOD_IN,
-+ GPIOD_IN,
-+ GPIOD_IN,
-+ GPIOD_ASIS,
-+ GPIOD_ASIS,
-+};
-+
-+#define T_INIT_JIFFIES msecs_to_jiffies(300)
-+#define T_RESET_US 10
-+#define T_FAULT_RECOVER msecs_to_jiffies(1000)
-+
-+/* SFP module presence detection is poor: the three MOD DEF signals are
-+ * the same length on the PCB, which means it's possible for MOD DEF 0 to
-+ * connect before the I2C bus on MOD DEF 1/2.
-+ *
-+ * The SFP MSA specifies 300ms as t_init (the time taken for TX_FAULT to
-+ * be deasserted) but makes no mention of the earliest time before we can
-+ * access the I2C EEPROM. However, Avago modules require 300ms.
-+ */
-+#define T_PROBE_INIT msecs_to_jiffies(300)
-+#define T_PROBE_RETRY msecs_to_jiffies(100)
-+
-+/*
-+ * SFP modules appear to always have their PHY configured for bus address
-+ * 0x56 (which with mdio-i2c, translates to a PHY address of 22).
-+ */
-+#define SFP_PHY_ADDR 22
-+
-+/*
-+ * Give this long for the PHY to reset.
-+ */
-+#define T_PHY_RESET_MS 50
-+
-+static DEFINE_MUTEX(sfp_mutex);
-+
-+struct sfp {
-+ struct device *dev;
-+ struct i2c_adapter *i2c;
-+ struct mii_bus *i2c_mii;
-+ struct net_device *ndev;
-+ struct phylink *phylink;
-+ struct phy_device *mod_phy;
-+
-+ unsigned int (*get_state)(struct sfp *);
-+ void (*set_state)(struct sfp *, unsigned int);
-+ int (*read)(struct sfp *, bool, u8, void *, size_t);
-+
-+ struct gpio_desc *gpio[GPIO_MAX];
-+
-+ unsigned int state;
-+ struct delayed_work poll;
-+ struct delayed_work timeout;
-+ struct mutex sm_mutex;
-+ unsigned char sm_mod_state;
-+ unsigned char sm_dev_state;
-+ unsigned short sm_state;
-+ unsigned int sm_retries;
-+
-+ struct sfp_eeprom_id id;
-+
-+ struct notifier_block netdev_nb;
-+};
-+
-+static unsigned long poll_jiffies;
-+
-+static unsigned int sfp_gpio_get_state(struct sfp *sfp)
-+{
-+ unsigned int i, state, v;
-+
-+ for (i = state = 0; i < GPIO_MAX; i++) {
-+ if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
-+ continue;
-+
-+ v = gpiod_get_value_cansleep(sfp->gpio[i]);
-+ if (v)
-+ state |= BIT(i);
-+ }
-+
-+ return state;
-+}
-+
-+static void sfp_gpio_set_state(struct sfp *sfp, unsigned int state)
-+{
-+ if (state & SFP_F_PRESENT) {
-+ /* If the module is present, drive the signals */
-+ if (sfp->gpio[GPIO_TX_DISABLE])
-+ gpiod_direction_output(sfp->gpio[GPIO_TX_DISABLE],
-+ state & SFP_F_TX_DISABLE);
-+ if (state & SFP_F_RATE_SELECT)
-+ gpiod_direction_output(sfp->gpio[GPIO_RATE_SELECT],
-+ state & SFP_F_RATE_SELECT);
-+ } else {
-+ /* Otherwise, let them float to the pull-ups */
-+ if (sfp->gpio[GPIO_TX_DISABLE])
-+ gpiod_direction_input(sfp->gpio[GPIO_TX_DISABLE]);
-+ if (state & SFP_F_RATE_SELECT)
-+ gpiod_direction_input(sfp->gpio[GPIO_RATE_SELECT]);
-+ }
-+}
-+
-+static int sfp__i2c_read(struct i2c_adapter *i2c, u8 bus_addr, u8 dev_addr,
-+ void *buf, size_t len)
-+{
-+ struct i2c_msg msgs[2];
-+ int ret;
-+
-+ msgs[0].addr = bus_addr;
-+ msgs[0].flags = 0;
-+ msgs[0].len = 1;
-+ msgs[0].buf = &dev_addr;
-+ msgs[1].addr = bus_addr;
-+ msgs[1].flags = I2C_M_RD;
-+ msgs[1].len = len;
-+ msgs[1].buf = buf;
-+
-+ ret = i2c_transfer(i2c, msgs, ARRAY_SIZE(msgs));
-+ if (ret < 0)
-+ return ret;
-+
-+ return ret == ARRAY_SIZE(msgs) ? len : 0;
-+}
-+
-+static int sfp_i2c_read(struct sfp *sfp, bool a2, u8 addr, void *buf,
-+ size_t len)
-+{
-+ return sfp__i2c_read(sfp->i2c, a2 ? 0x51 : 0x50, addr, buf, len);
-+}
-+
-+static int sfp_i2c_configure(struct sfp *sfp, struct i2c_adapter *i2c)
-+{
-+ struct mii_bus *i2c_mii;
-+ int ret;
-+
-+ if (!i2c_check_functionality(i2c, I2C_FUNC_I2C))
-+ return -EINVAL;
-+
-+ sfp->i2c = i2c;
-+ sfp->read = sfp_i2c_read;
-+
-+ i2c_mii = mdio_i2c_alloc(sfp->dev, i2c);
-+ if (IS_ERR(i2c_mii))
-+ return PTR_ERR(i2c_mii);
-+
-+ i2c_mii->name = "SFP I2C Bus";
-+ i2c_mii->phy_mask = ~0;
-+
-+ ret = mdiobus_register(i2c_mii);
-+ if (ret < 0) {
-+ mdiobus_free(i2c_mii);
-+ return ret;
-+ }
-+
-+ sfp->i2c_mii = i2c_mii;
-+
-+ return 0;
-+}
-+
-+
-+/* Interface */
-+static unsigned int sfp_get_state(struct sfp *sfp)
-+{
-+ return sfp->get_state(sfp);
-+}
-+
-+static void sfp_set_state(struct sfp *sfp, unsigned int state)
-+{
-+ sfp->set_state(sfp, state);
-+}
-+
-+static int sfp_read(struct sfp *sfp, bool a2, u8 addr, void *buf, size_t len)
-+{
-+ return sfp->read(sfp, a2, addr, buf, len);
-+}
-+
-+static unsigned int sfp_check(void *buf, size_t len)
-+{
-+ u8 *p, check;
-+
-+ for (p = buf, check = 0; len; p++, len--)
-+ check += *p;
-+
-+ return check;
-+}
-+
-+/* Helpers */
-+static void sfp_module_tx_disable(struct sfp *sfp)
-+{
-+ dev_dbg(sfp->dev, "tx disable %u -> %u\n",
-+ sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 1);
-+ sfp->state |= SFP_F_TX_DISABLE;
-+ sfp_set_state(sfp, sfp->state);
-+}
-+
-+static void sfp_module_tx_enable(struct sfp *sfp)
-+{
-+ dev_dbg(sfp->dev, "tx disable %u -> %u\n",
-+ sfp->state & SFP_F_TX_DISABLE ? 1 : 0, 0);
-+ sfp->state &= ~SFP_F_TX_DISABLE;
-+ sfp_set_state(sfp, sfp->state);
-+}
-+
-+static void sfp_module_tx_fault_reset(struct sfp *sfp)
-+{
-+ unsigned int state = sfp->state;
-+
-+ if (state & SFP_F_TX_DISABLE)
-+ return;
-+
-+ sfp_set_state(sfp, state | SFP_F_TX_DISABLE);
-+
-+ udelay(T_RESET_US);
-+
-+ sfp_set_state(sfp, state);
-+}
-+
-+/* SFP state machine */
-+static void sfp_sm_set_timer(struct sfp *sfp, unsigned int timeout)
-+{
-+ if (timeout)
-+ mod_delayed_work(system_power_efficient_wq, &sfp->timeout,
-+ timeout);
-+ else
-+ cancel_delayed_work(&sfp->timeout);
-+}
-+
-+static void sfp_sm_next(struct sfp *sfp, unsigned int state,
-+ unsigned int timeout)
-+{
-+ sfp->sm_state = state;
-+ sfp_sm_set_timer(sfp, timeout);
-+}
-+
-+static void sfp_sm_ins_next(struct sfp *sfp, unsigned int state, unsigned int timeout)
-+{
-+ sfp->sm_mod_state = state;
-+ sfp_sm_set_timer(sfp, timeout);
-+}
-+
-+static void sfp_sm_phy_detach(struct sfp *sfp)
-+{
-+ phy_stop(sfp->mod_phy);
-+ if (sfp->phylink)
-+ phylink_disconnect_phy(sfp->phylink);
-+ phy_device_remove(sfp->mod_phy);
-+ phy_device_free(sfp->mod_phy);
-+ sfp->mod_phy = NULL;
-+}
-+
-+static void sfp_sm_probe_phy(struct sfp *sfp)
-+{
-+ struct phy_device *phy;
-+ int err;
-+
-+ msleep(T_PHY_RESET_MS);
-+
-+ phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
-+ if (IS_ERR(phy)) {
-+ dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
-+ return;
-+ }
-+ if (!phy) {
-+ dev_info(sfp->dev, "no PHY detected\n");
-+ return;
-+ }
-+
-+ if (sfp->phylink) {
-+ err = phylink_connect_phy(sfp->phylink, phy);
-+ if (err) {
-+ phy_device_remove(phy);
-+ phy_device_free(phy);
-+ dev_err(sfp->dev, "phylink_connect_phy failed: %d\n",
-+ err);
-+ return;
-+ }
-+ }
-+
-+ sfp->mod_phy = phy;
-+ phy_start(phy);
-+}
-+
-+static void sfp_sm_link_up(struct sfp *sfp)
-+{
-+ if (sfp->phylink)
-+ phylink_enable(sfp->phylink);
-+
-+ sfp_sm_next(sfp, SFP_S_LINK_UP, 0);
-+}
-+
-+static void sfp_sm_link_down(struct sfp *sfp)
-+{
-+ if (sfp->phylink)
-+ phylink_disable(sfp->phylink);
-+}
-+
-+static void sfp_sm_link_check_los(struct sfp *sfp)
-+{
-+ unsigned int los = sfp->state & SFP_F_LOS;
-+
-+ /* FIXME: what if neither SFP_OPTIONS_LOS_INVERTED nor
-+ * SFP_OPTIONS_LOS_NORMAL are set? For now, we assume
-+ * the same as SFP_OPTIONS_LOS_NORMAL set.
-+ */
-+ if (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED)
-+ los ^= SFP_F_LOS;
-+
-+ if (los)
-+ sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
-+ else
-+ sfp_sm_link_up(sfp);
-+}
-+
-+static void sfp_sm_fault(struct sfp *sfp, bool warn)
-+{
-+ if (sfp->sm_retries && !--sfp->sm_retries) {
-+ dev_err(sfp->dev, "module persistently indicates fault, disabling\n");
-+ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
-+ } else {
-+ if (warn)
-+ dev_err(sfp->dev, "module transmit fault indicated\n");
-+
-+ sfp_sm_next(sfp, SFP_S_TX_FAULT, T_FAULT_RECOVER);
-+ }
-+}
-+
-+static void sfp_sm_mod_init(struct sfp *sfp)
-+{
-+ sfp_module_tx_enable(sfp);
-+
-+ /* Wait t_init before indicating that the link is up, provided the
-+ * current state indicates no TX_FAULT. If TX_FAULT clears before
-+ * this time, that's fine too.
-+ */
-+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+ sfp->sm_retries = 5;
-+
-+ if (sfp->phylink) {
-+ /* Setting the serdes link mode is guesswork: there's no
-+ * field in the EEPROM which indicates what mode should
-+ * be used.
-+ *
-+ * If it's a gigabit-only fiber module, it probably does
-+ * not have a PHY, so switch to 802.3z negotiation mode.
-+ * Otherwise, switch to SGMII mode (which is required to
-+ * support non-gigabit speeds) and probe for a PHY.
-+ */
-+ if (sfp->id.base.e1000_base_t ||
-+ sfp->id.base.e100_base_lx ||
-+ sfp->id.base.e100_base_fx)
-+ sfp_sm_probe_phy(sfp);
-+ }
-+}
-+
-+static int sfp_sm_mod_probe(struct sfp *sfp)
-+{
-+ /* SFP module inserted - read I2C data */
-+ struct sfp_eeprom_id id;
-+ char vendor[17];
-+ char part[17];
-+ char sn[17];
-+ char date[9];
-+ char rev[5];
-+ u8 check;
-+ int err;
-+
-+ err = sfp_read(sfp, false, 0, &id, sizeof(id));
-+ if (err < 0) {
-+ dev_err(sfp->dev, "failed to read EEPROM: %d\n", err);
-+ return -EAGAIN;
-+ }
-+
-+ if (err != sizeof(id)) {
-+ dev_err(sfp->dev, "EEPROM short read: %d\n", err);
-+ return -EAGAIN;
-+ }
-+
-+ /* Validate the checksum over the base structure */
-+ check = sfp_check(&id.base, sizeof(id.base) - 1);
-+ if (check != id.base.cc_base) {
-+ dev_err(sfp->dev,
-+ "EEPROM base structure checksum failure: 0x%02x\n",
-+ check);
-+ print_hex_dump(KERN_ERR, "sfp EE: ", DUMP_PREFIX_OFFSET,
-+ 16, 1, &id, sizeof(id.base) - 1, true);
-+ return -EINVAL;
-+ }
-+
-+ check = sfp_check(&id.ext, sizeof(id.ext) - 1);
-+ if (check != id.ext.cc_ext) {
-+ dev_err(sfp->dev,
-+ "EEPROM extended structure checksum failure: 0x%02x\n",
-+ check);
-+ memset(&id.ext, 0, sizeof(id.ext));
-+ }
-+
-+ sfp->id = id;
-+
-+ memcpy(vendor, sfp->id.base.vendor_name, 16);
-+ vendor[16] = '\0';
-+ memcpy(part, sfp->id.base.vendor_pn, 16);
-+ part[16] = '\0';
-+ memcpy(rev, sfp->id.base.vendor_rev, 4);
-+ rev[4] = '\0';
-+ memcpy(sn, sfp->id.ext.vendor_sn, 16);
-+ sn[16] = '\0';
-+ memcpy(date, sfp->id.ext.datecode, 8);
-+ date[8] = '\0';
-+
-+ dev_info(sfp->dev, "module %s %s rev %s sn %s dc %s\n", vendor, part, rev, sn, date);
-+
-+ /* We only support SFP modules, not the legacy GBIC modules. */
-+ if (sfp->id.base.phys_id != SFP_PHYS_ID_SFP ||
-+ sfp->id.base.phys_ext_id != SFP_PHYS_EXT_ID_SFP) {
-+ dev_err(sfp->dev, "module is not SFP - phys id 0x%02x 0x%02x\n",
-+ sfp->id.base.phys_id, sfp->id.base.phys_ext_id);
-+ return -EINVAL;
-+ }
-+
-+ /*
-+ * What isn't clear from the SFP documentation is whether this
-+ * specifies the encoding expected on the TD/RD lines, or whether
-+ * the TD/RD lines are always 8b10b encoded, but the transceiver
-+ * converts. Eg, think of a copper SFP supporting 1G/100M/10M
-+ * ethernet: this requires 8b10b encoding for 1G, 4b5b for 100M,
-+ * and manchester for 10M.
-+ */
-+ /* 1Gbit ethernet requires 8b10b encoding */
-+ if (sfp->id.base.encoding != SFP_ENCODING_8B10B) {
-+ dev_err(sfp->dev, "module does not support 8B10B encoding\n");
-+ return -EINVAL;
-+ }
-+
-+ if (sfp->phylink) {
-+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, };
-+ int mode;
-+ u8 port;
-+
-+ phylink_set(support, Autoneg);
-+ phylink_set(support, Pause);
-+ phylink_set(support, Asym_Pause);
-+
-+ /* Set ethtool support from the compliance fields. */
-+ if (sfp->id.base.e10g_base_sr)
-+ phylink_set(support, 10000baseSR_Full);
-+ if (sfp->id.base.e10g_base_lr)
-+ phylink_set(support, 10000baseLR_Full);
-+ if (sfp->id.base.e10g_base_lrm)
-+ phylink_set(support, 10000baseLRM_Full);
-+ if (sfp->id.base.e10g_base_er)
-+ phylink_set(support, 10000baseER_Full);
-+ if (sfp->id.base.e1000_base_sx ||
-+ sfp->id.base.e1000_base_lx ||
-+ sfp->id.base.e1000_base_cx)
-+ phylink_set(support, 1000baseX_Full);
-+ if (sfp->id.base.e1000_base_t) {
-+ phylink_set(support, 1000baseT_Half);
-+ phylink_set(support, 1000baseT_Full);
-+ }
-+
-+ /* port is the physical connector, set this from the
-+ * connector field.
-+ */
-+ switch (sfp->id.base.connector) {
-+ case SFP_CONNECTOR_SC:
-+ case SFP_CONNECTOR_FIBERJACK:
-+ case SFP_CONNECTOR_LC:
-+ case SFP_CONNECTOR_MT_RJ:
-+ case SFP_CONNECTOR_MU:
-+ case SFP_CONNECTOR_OPTICAL_PIGTAIL:
-+ phylink_set(support, FIBRE);
-+ port = PORT_FIBRE;
-+ break;
-+
-+ case SFP_CONNECTOR_RJ45:
-+ phylink_set(support, TP);
-+ port = PORT_TP;
-+ break;
-+
-+ case SFP_CONNECTOR_UNSPEC:
-+ if (sfp->id.base.e1000_base_t) {
-+ phylink_set(support, TP);
-+ port = PORT_TP;
-+ break;
-+ }
-+ /* fallthrough */
-+ case SFP_CONNECTOR_SG: /* guess */
-+ case SFP_CONNECTOR_MPO_1X12:
-+ case SFP_CONNECTOR_MPO_2X16:
-+ case SFP_CONNECTOR_HSSDC_II:
-+ case SFP_CONNECTOR_COPPER_PIGTAIL:
-+ case SFP_CONNECTOR_NOSEPARATE:
-+ case SFP_CONNECTOR_MXC_2X16:
-+ default:
-+ /* a guess at the supported link modes */
-+ dev_warn(sfp->dev, "Guessing link modes, please report...\n");
-+ phylink_set(support, 1000baseT_Half);
-+ phylink_set(support, 1000baseT_Full);
-+ port = PORT_OTHER;
-+ break;
-+ }
-+
-+ /* Setting the serdes link mode is guesswork: there's no
-+ * field in the EEPROM which indicates what mode should
-+ * be used.
-+ *
-+ * If it's a gigabit-only fiber module, it probably does
-+ * not have a PHY, so switch to 802.3z negotiation mode.
-+ * Otherwise, switch to SGMII mode (which is required to
-+ * support non-gigabit speeds) and probe for a PHY.
-+ */
-+ if (!sfp->id.base.e1000_base_t &&
-+ !sfp->id.base.e100_base_lx &&
-+ !sfp->id.base.e100_base_fx) {
-+ mode = MLO_AN_8023Z;
-+ } else {
-+ mode = MLO_AN_SGMII;
-+ }
-+
-+ phylink_set_link(sfp->phylink, mode, port, support);
-+ }
-+
-+ return 0;
-+}
-+
-+static void sfp_sm_mod_remove(struct sfp *sfp)
-+{
-+ if (sfp->mod_phy)
-+ sfp_sm_phy_detach(sfp);
-+
-+ sfp_module_tx_disable(sfp);
-+
-+ memset(&sfp->id, 0, sizeof(sfp->id));
-+
-+ dev_info(sfp->dev, "module removed\n");
-+}
-+
-+static void sfp_sm_event(struct sfp *sfp, unsigned int event)
-+{
-+ mutex_lock(&sfp->sm_mutex);
-+
-+ dev_dbg(sfp->dev, "SM: enter %u:%u:%u event %u\n",
-+ sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state, event);
-+
-+ /* This state machine tracks the insert/remove state of
-+ * the module, and handles probing the on-board EEPROM.
-+ */
-+ switch (sfp->sm_mod_state) {
-+ default:
-+ if (event == SFP_E_INSERT) {
-+ sfp_module_tx_disable(sfp);
-+ sfp_sm_ins_next(sfp, SFP_MOD_PROBE, T_PROBE_INIT);
-+ }
-+ break;
-+
-+ case SFP_MOD_PROBE:
-+ if (event == SFP_E_REMOVE) {
-+ sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
-+ } else if (event == SFP_E_TIMEOUT) {
-+ int err = sfp_sm_mod_probe(sfp);
-+
-+ if (err == 0)
-+ sfp_sm_ins_next(sfp, SFP_MOD_PRESENT, 0);
-+ else if (err == -EAGAIN)
-+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+ else
-+ sfp_sm_ins_next(sfp, SFP_MOD_ERROR, 0);
-+ }
-+ break;
-+
-+ case SFP_MOD_PRESENT:
-+ case SFP_MOD_ERROR:
-+ if (event == SFP_E_REMOVE) {
-+ sfp_sm_mod_remove(sfp);
-+ sfp_sm_ins_next(sfp, SFP_MOD_EMPTY, 0);
-+ }
-+ break;
-+ }
-+
-+ /* This state machine tracks the netdev up/down state */
-+ switch (sfp->sm_dev_state) {
-+ default:
-+ if (event == SFP_E_DEV_UP)
-+ sfp->sm_dev_state = SFP_DEV_UP;
-+ break;
-+
-+ case SFP_DEV_UP:
-+ if (event == SFP_E_DEV_DOWN) {
-+ /* If the module has a PHY, avoid raising TX disable
-+ * as this resets the PHY. Otherwise, raise it to
-+ * turn the laser off.
-+ */
-+ if (!sfp->mod_phy)
-+ sfp_module_tx_disable(sfp);
-+ sfp->sm_dev_state = SFP_DEV_DOWN;
-+ }
-+ break;
-+ }
-+
-+ /* Some events are global */
-+ if (sfp->sm_state != SFP_S_DOWN &&
-+ (sfp->sm_mod_state != SFP_MOD_PRESENT ||
-+ sfp->sm_dev_state != SFP_DEV_UP)) {
-+ if (sfp->sm_state == SFP_S_LINK_UP &&
-+ sfp->sm_dev_state == SFP_DEV_UP)
-+ sfp_sm_link_down(sfp);
-+ if (sfp->mod_phy)
-+ sfp_sm_phy_detach(sfp);
-+ sfp_sm_next(sfp, SFP_S_DOWN, 0);
-+ mutex_unlock(&sfp->sm_mutex);
-+ return;
-+ }
-+
-+ /* The main state machine */
-+ switch (sfp->sm_state) {
-+ case SFP_S_DOWN:
-+ if (sfp->sm_mod_state == SFP_MOD_PRESENT &&
-+ sfp->sm_dev_state == SFP_DEV_UP)
-+ sfp_sm_mod_init(sfp);
-+ break;
-+
-+ case SFP_S_INIT:
-+ if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT)
-+ sfp_sm_fault(sfp, true);
-+ else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR)
-+ sfp_sm_link_check_los(sfp);
-+ break;
-+
-+ case SFP_S_WAIT_LOS:
-+ if (event == SFP_E_TX_FAULT)
-+ sfp_sm_fault(sfp, true);
-+ else if (event ==
-+ (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ?
-+ SFP_E_LOS_HIGH : SFP_E_LOS_LOW))
-+ sfp_sm_link_up(sfp);
-+ break;
-+
-+ case SFP_S_LINK_UP:
-+ if (event == SFP_E_TX_FAULT) {
-+ sfp_sm_link_down(sfp);
-+ sfp_sm_fault(sfp, true);
-+ } else if (event ==
-+ (sfp->id.ext.options & SFP_OPTIONS_LOS_INVERTED ?
-+ SFP_E_LOS_LOW : SFP_E_LOS_HIGH)) {
-+ sfp_sm_link_down(sfp);
-+ sfp_sm_next(sfp, SFP_S_WAIT_LOS, 0);
-+ }
-+ break;
-+
-+ case SFP_S_TX_FAULT:
-+ if (event == SFP_E_TIMEOUT) {
-+ sfp_module_tx_fault_reset(sfp);
-+ sfp_sm_next(sfp, SFP_S_REINIT, T_INIT_JIFFIES);
-+ }
-+ break;
-+
-+ case SFP_S_REINIT:
-+ if (event == SFP_E_TIMEOUT && sfp->state & SFP_F_TX_FAULT) {
-+ sfp_sm_fault(sfp, false);
-+ } else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
-+ dev_info(sfp->dev, "module transmit fault recovered\n");
-+ sfp_sm_link_check_los(sfp);
-+ }
-+ break;
-+
-+ case SFP_S_TX_DISABLE:
-+ break;
-+ }
-+
-+ dev_dbg(sfp->dev, "SM: exit %u:%u:%u\n",
-+ sfp->sm_mod_state, sfp->sm_dev_state, sfp->sm_state);
-+
-+ mutex_unlock(&sfp->sm_mutex);
-+}
-+
-+#if 0
-+static int sfp_phy_module_info(struct phy_device *phy,
-+ struct ethtool_modinfo *modinfo)
-+{
-+ struct sfp *sfp = phy->priv;
-+
-+ /* locking... and check module is present */
-+
-+ if (sfp->id.ext.sff8472_compliance) {
-+ modinfo->type = ETH_MODULE_SFF_8472;
-+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
-+ } else {
-+ modinfo->type = ETH_MODULE_SFF_8079;
-+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
-+ }
-+ return 0;
-+}
-+
-+static int sfp_phy_module_eeprom(struct phy_device *phy,
-+ struct ethtool_eeprom *ee, u8 *data)
-+{
-+ struct sfp *sfp = phy->priv;
-+ unsigned int first, last, len;
-+ int ret;
-+
-+ if (ee->len == 0)
-+ return -EINVAL;
-+
-+ first = ee->offset;
-+ last = ee->offset + ee->len;
-+ if (first < ETH_MODULE_SFF_8079_LEN) {
-+ len = last;
-+ if (len > ETH_MODULE_SFF_8079_LEN)
-+ len = ETH_MODULE_SFF_8079_LEN;
-+ len -= first;
-+
-+ ret = sfp->read(sfp, false, first, data, len);
-+ if (ret < 0)
-+ return ret;
-+
-+ first += len;
-+ data += len;
-+ }
-+ if (first >= ETH_MODULE_SFF_8079_LEN && last > first) {
-+ len = last - first;
-+
-+ ret = sfp->read(sfp, true, first, data, len);
-+ if (ret < 0)
-+ return ret;
-+ }
-+ return 0;
-+}
-+#endif
-+
-+static void sfp_timeout(struct work_struct *work)
-+{
-+ struct sfp *sfp = container_of(work, struct sfp, timeout.work);
-+
-+ sfp_sm_event(sfp, SFP_E_TIMEOUT);
-+}
-+
-+static void sfp_check_state(struct sfp *sfp)
-+{
-+ unsigned int state, i, changed;
-+
-+ state = sfp_get_state(sfp);
-+ changed = state ^ sfp->state;
-+ changed &= SFP_F_PRESENT | SFP_F_LOS | SFP_F_TX_FAULT;
-+
-+ for (i = 0; i < GPIO_MAX; i++)
-+ if (changed & BIT(i))
-+ dev_dbg(sfp->dev, "%s %u -> %u\n", gpio_of_names[i],
-+ !!(sfp->state & BIT(i)), !!(state & BIT(i)));
-+
-+ state |= sfp->state & (SFP_F_TX_DISABLE | SFP_F_RATE_SELECT);
-+ sfp->state = state;
-+
-+ if (changed & SFP_F_PRESENT)
-+ sfp_sm_event(sfp, state & SFP_F_PRESENT ?
-+ SFP_E_INSERT : SFP_E_REMOVE);
-+
-+ if (changed & SFP_F_TX_FAULT)
-+ sfp_sm_event(sfp, state & SFP_F_TX_FAULT ?
-+ SFP_E_TX_FAULT : SFP_E_TX_CLEAR);
-+
-+ if (changed & SFP_F_LOS)
-+ sfp_sm_event(sfp, state & SFP_F_LOS ?
-+ SFP_E_LOS_HIGH : SFP_E_LOS_LOW);
-+}
-+
-+static irqreturn_t sfp_irq(int irq, void *data)
-+{
-+ struct sfp *sfp = data;
-+
-+ sfp_check_state(sfp);
-+
-+ return IRQ_HANDLED;
-+}
-+
-+static void sfp_poll(struct work_struct *work)
-+{
-+ struct sfp *sfp = container_of(work, struct sfp, poll.work);
-+
-+ sfp_check_state(sfp);
-+ mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
-+}
-+
-+static int sfp_netdev_notify(struct notifier_block *nb, unsigned long act, void *data)
-+{
-+ struct sfp *sfp = container_of(nb, struct sfp, netdev_nb);
-+ struct netdev_notifier_info *info = data;
-+ struct net_device *ndev = info->dev;
-+
-+ if (!sfp->ndev || ndev != sfp->ndev)
-+ return NOTIFY_DONE;
-+
-+ switch (act) {
-+ case NETDEV_UP:
-+ sfp_sm_event(sfp, SFP_E_DEV_UP);
-+ break;
-+
-+ case NETDEV_GOING_DOWN:
-+ sfp_sm_event(sfp, SFP_E_DEV_DOWN);
-+ break;
-+
-+ case NETDEV_UNREGISTER:
-+ if (sfp->mod_phy && sfp->phylink)
-+ phylink_disconnect_phy(sfp->phylink);
-+ sfp->phylink = NULL;
-+ dev_put(sfp->ndev);
-+ sfp->ndev = NULL;
-+ break;
-+ }
-+ return NOTIFY_OK;
-+}
-+
-+static struct sfp *sfp_alloc(struct device *dev)
-+{
-+ struct sfp *sfp;
-+
-+ sfp = kzalloc(sizeof(*sfp), GFP_KERNEL);
-+ if (!sfp)
-+ return ERR_PTR(-ENOMEM);
-+
-+ sfp->dev = dev;
-+
-+ mutex_init(&sfp->sm_mutex);
-+ INIT_DELAYED_WORK(&sfp->poll, sfp_poll);
-+ INIT_DELAYED_WORK(&sfp->timeout, sfp_timeout);
-+
-+ sfp->netdev_nb.notifier_call = sfp_netdev_notify;
-+
-+ return sfp;
-+}
-+
-+static void sfp_destroy(struct sfp *sfp)
-+{
-+ cancel_delayed_work_sync(&sfp->poll);
-+ cancel_delayed_work_sync(&sfp->timeout);
-+ if (sfp->i2c_mii) {
-+ mdiobus_unregister(sfp->i2c_mii);
-+ mdiobus_free(sfp->i2c_mii);
-+ }
-+ if (sfp->i2c)
-+ i2c_put_adapter(sfp->i2c);
-+ of_node_put(sfp->dev->of_node);
-+ kfree(sfp);
-+}
-+
-+static void sfp_cleanup(void *data)
-+{
-+ struct sfp *sfp = data;
-+
-+ sfp_destroy(sfp);
-+}
-+
-+static int sfp_probe(struct platform_device *pdev)
-+{
-+ struct sfp *sfp;
-+ bool poll = false;
-+ int irq, err, i;
-+
-+ sfp = sfp_alloc(&pdev->dev);
-+ if (IS_ERR(sfp))
-+ return PTR_ERR(sfp);
-+
-+ platform_set_drvdata(pdev, sfp);
-+
-+ err = devm_add_action(sfp->dev, sfp_cleanup, sfp);
-+ if (err < 0)
-+ return err;
-+
-+ if (pdev->dev.of_node) {
-+ struct device_node *node = pdev->dev.of_node;
-+ struct device_node *np;
-+
-+ np = of_parse_phandle(node, "i2c-bus", 0);
-+ if (np) {
-+ struct i2c_adapter *i2c;
-+
-+ i2c = of_find_i2c_adapter_by_node(np);
-+ of_node_put(np);
-+ if (!i2c)
-+ return -EPROBE_DEFER;
-+
-+ err = sfp_i2c_configure(sfp, i2c);
-+ if (err < 0) {
-+ i2c_put_adapter(i2c);
-+ return err;
-+ }
-+ }
-+
-+ for (i = 0; i < GPIO_MAX; i++) {
-+ sfp->gpio[i] = devm_gpiod_get_optional(sfp->dev,
-+ gpio_of_names[i], gpio_flags[i]);
-+ if (IS_ERR(sfp->gpio[i]))
-+ return PTR_ERR(sfp->gpio[i]);
-+ }
-+
-+ sfp->get_state = sfp_gpio_get_state;
-+ sfp->set_state = sfp_gpio_set_state;
-+
-+ np = of_parse_phandle(node, "sfp,ethernet", 0);
-+ if (!np) {
-+ dev_err(sfp->dev, "missing sfp,ethernet property\n");
-+ return -EINVAL;
-+ }
-+
-+ sfp->ndev = of_find_net_device_by_node(np);
-+ if (!sfp->ndev) {
-+ dev_err(sfp->dev, "ethernet device not found\n");
-+ return -EPROBE_DEFER;
-+ }
-+
-+ dev_hold(sfp->ndev);
-+ put_device(&sfp->ndev->dev);
-+
-+ sfp->phylink = phylink_lookup_by_netdev(sfp->ndev);
-+ if (!sfp->phylink) {
-+ dev_err(sfp->dev, "phylink for %s not found\n",
-+ netdev_name(sfp->ndev));
-+ return -EPROBE_DEFER;
-+ }
-+
-+ phylink_disable(sfp->phylink);
-+ }
-+
-+ sfp->state = sfp_get_state(sfp);
-+ if (sfp->gpio[GPIO_TX_DISABLE] &&
-+ gpiod_get_value_cansleep(sfp->gpio[GPIO_TX_DISABLE]))
-+ sfp->state |= SFP_F_TX_DISABLE;
-+ if (sfp->gpio[GPIO_RATE_SELECT] &&
-+ gpiod_get_value_cansleep(sfp->gpio[GPIO_RATE_SELECT]))
-+ sfp->state |= SFP_F_RATE_SELECT;
-+ sfp_set_state(sfp, sfp->state);
-+ sfp_module_tx_disable(sfp);
-+ if (sfp->state & SFP_F_PRESENT)
-+ sfp_sm_event(sfp, SFP_E_INSERT);
-+
-+ for (i = 0; i < GPIO_MAX; i++) {
-+ if (gpio_flags[i] != GPIOD_IN || !sfp->gpio[i])
-+ continue;
-+
-+ irq = gpiod_to_irq(sfp->gpio[i]);
-+ if (!irq) {
-+ poll = true;
-+ continue;
-+ }
-+
-+ err = devm_request_threaded_irq(sfp->dev, irq, NULL, sfp_irq,
-+ IRQF_ONESHOT |
-+ IRQF_TRIGGER_RISING |
-+ IRQF_TRIGGER_FALLING,
-+ dev_name(sfp->dev), sfp);
-+ if (err)
-+ poll = true;
-+ }
-+
-+ if (poll)
-+ mod_delayed_work(system_wq, &sfp->poll, poll_jiffies);
-+
-+ register_netdevice_notifier(&sfp->netdev_nb);
-+
-+ return 0;
-+}
-+
-+static int sfp_remove(struct platform_device *pdev)
-+{
-+ struct sfp *sfp = platform_get_drvdata(pdev);
-+
-+ unregister_netdevice_notifier(&sfp->netdev_nb);
-+ if (sfp->ndev)
-+ dev_put(sfp->ndev);
-+
-+ return 0;
-+}
-+
-+static const struct of_device_id sfp_of_match[] = {
-+ { .compatible = "sff,sfp", },
-+ { },
-+};
-+MODULE_DEVICE_TABLE(of, sfp_of_match);
-+
-+static struct platform_driver sfp_driver = {
-+ .probe = sfp_probe,
-+ .remove = sfp_remove,
-+ .driver = {
-+ .name = "sfp",
-+ .of_match_table = sfp_of_match,
-+ },
-+};
-+
-+static int sfp_init(void)
-+{
-+ poll_jiffies = msecs_to_jiffies(100);
-+
-+ return platform_driver_register(&sfp_driver);
-+}
-+module_init(sfp_init);
-+
-+static void sfp_exit(void)
-+{
-+ platform_driver_unregister(&sfp_driver);
-+}
-+module_exit(sfp_exit);
-+
-+MODULE_ALIAS("platform:sfp");
-+MODULE_AUTHOR("Russell King");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/include/linux/sfp.h
-@@ -0,0 +1,344 @@
-+#ifndef LINUX_SFP_H
-+#define LINUX_SFP_H
-+
-+struct __packed sfp_eeprom_base {
-+ u8 phys_id;
-+ u8 phys_ext_id;
-+ u8 connector;
-+#if defined __BIG_ENDIAN_BITFIELD
-+ u8 e10g_base_er:1;
-+ u8 e10g_base_lrm:1;
-+ u8 e10g_base_lr:1;
-+ u8 e10g_base_sr:1;
-+ u8 if_1x_sx:1;
-+ u8 if_1x_lx:1;
-+ u8 if_1x_copper_active:1;
-+ u8 if_1x_copper_passive:1;
-+
-+ u8 escon_mmf_1310_led:1;
-+ u8 escon_smf_1310_laser:1;
-+ u8 sonet_oc192_short_reach:1;
-+ u8 sonet_reach_bit1:1;
-+ u8 sonet_reach_bit2:1;
-+ u8 sonet_oc48_long_reach:1;
-+ u8 sonet_oc48_intermediate_reach:1;
-+ u8 sonet_oc48_short_reach:1;
-+
-+ u8 unallocated_5_7:1;
-+ u8 sonet_oc12_smf_long_reach:1;
-+ u8 sonet_oc12_smf_intermediate_reach:1;
-+ u8 sonet_oc12_short_reach:1;
-+ u8 unallocated_5_3:1;
-+ u8 sonet_oc3_smf_long_reach:1;
-+ u8 sonet_oc3_smf_intermediate_reach:1;
-+ u8 sonet_oc3_short_reach:1;
-+
-+ u8 e_base_px:1;
-+ u8 e_base_bx10:1;
-+ u8 e100_base_fx:1;
-+ u8 e100_base_lx:1;
-+ u8 e1000_base_t:1;
-+ u8 e1000_base_cx:1;
-+ u8 e1000_base_lx:1;
-+ u8 e1000_base_sx:1;
-+
-+ u8 fc_ll_v:1;
-+ u8 fc_ll_s:1;
-+ u8 fc_ll_i:1;
-+ u8 fc_ll_l:1;
-+ u8 fc_ll_m:1;
-+ u8 fc_tech_sa:1;
-+ u8 fc_tech_lc:1;
-+ u8 fc_tech_electrical_inter_enclosure:1;
-+
-+ u8 fc_tech_electrical_intra_enclosure:1;
-+ u8 fc_tech_sn:1;
-+ u8 fc_tech_sl:1;
-+ u8 fc_tech_ll:1;
-+ u8 sfp_ct_active:1;
-+ u8 sfp_ct_passive:1;
-+ u8 unallocated_8_1:1;
-+ u8 unallocated_8_0:1;
-+
-+ u8 fc_media_tw:1;
-+ u8 fc_media_tp:1;
-+ u8 fc_media_mi:1;
-+ u8 fc_media_tv:1;
-+ u8 fc_media_m6:1;
-+ u8 fc_media_m5:1;
-+ u8 unallocated_9_1:1;
-+ u8 fc_media_sm:1;
-+
-+ u8 fc_speed_1200:1;
-+ u8 fc_speed_800:1;
-+ u8 fc_speed_1600:1;
-+ u8 fc_speed_400:1;
-+ u8 fc_speed_3200:1;
-+ u8 fc_speed_200:1;
-+ u8 unallocated_10_1:1;
-+ u8 fc_speed_100:1;
-+#elif defined __LITTLE_ENDIAN_BITFIELD
-+ u8 if_1x_copper_passive:1;
-+ u8 if_1x_copper_active:1;
-+ u8 if_1x_lx:1;
-+ u8 if_1x_sx:1;
-+ u8 e10g_base_sr:1;
-+ u8 e10g_base_lr:1;
-+ u8 e10g_base_lrm:1;
-+ u8 e10g_base_er:1;
-+
-+ u8 sonet_oc3_short_reach:1;
-+ u8 sonet_oc3_smf_intermediate_reach:1;
-+ u8 sonet_oc3_smf_long_reach:1;
-+ u8 unallocated_5_3:1;
-+ u8 sonet_oc12_short_reach:1;
-+ u8 sonet_oc12_smf_intermediate_reach:1;
-+ u8 sonet_oc12_smf_long_reach:1;
-+ u8 unallocated_5_7:1;
-+
-+ u8 sonet_oc48_short_reach:1;
-+ u8 sonet_oc48_intermediate_reach:1;
-+ u8 sonet_oc48_long_reach:1;
-+ u8 sonet_reach_bit2:1;
-+ u8 sonet_reach_bit1:1;
-+ u8 sonet_oc192_short_reach:1;
-+ u8 escon_smf_1310_laser:1;
-+ u8 escon_mmf_1310_led:1;
-+
-+ u8 e1000_base_sx:1;
-+ u8 e1000_base_lx:1;
-+ u8 e1000_base_cx:1;
-+ u8 e1000_base_t:1;
-+ u8 e100_base_lx:1;
-+ u8 e100_base_fx:1;
-+ u8 e_base_bx10:1;
-+ u8 e_base_px:1;
-+
-+ u8 fc_tech_electrical_inter_enclosure:1;
-+ u8 fc_tech_lc:1;
-+ u8 fc_tech_sa:1;
-+ u8 fc_ll_m:1;
-+ u8 fc_ll_l:1;
-+ u8 fc_ll_i:1;
-+ u8 fc_ll_s:1;
-+ u8 fc_ll_v:1;
-+
-+ u8 unallocated_8_0:1;
-+ u8 unallocated_8_1:1;
-+ u8 sfp_ct_passive:1;
-+ u8 sfp_ct_active:1;
-+ u8 fc_tech_ll:1;
-+ u8 fc_tech_sl:1;
-+ u8 fc_tech_sn:1;
-+ u8 fc_tech_electrical_intra_enclosure:1;
-+
-+ u8 fc_media_sm:1;
-+ u8 unallocated_9_1:1;
-+ u8 fc_media_m5:1;
-+ u8 fc_media_m6:1;
-+ u8 fc_media_tv:1;
-+ u8 fc_media_mi:1;
-+ u8 fc_media_tp:1;
-+ u8 fc_media_tw:1;
-+
-+ u8 fc_speed_100:1;
-+ u8 unallocated_10_1:1;
-+ u8 fc_speed_200:1;
-+ u8 fc_speed_3200:1;
-+ u8 fc_speed_400:1;
-+ u8 fc_speed_1600:1;
-+ u8 fc_speed_800:1;
-+ u8 fc_speed_1200:1;
-+#else
-+#error Unknown Endian
-+#endif
-+ u8 encoding;
-+ u8 br_nominal;
-+ u8 rate_id;
-+ u8 link_len[6];
-+ char vendor_name[16];
-+ u8 reserved36;
-+ char vendor_oui[3];
-+ char vendor_pn[16];
-+ char vendor_rev[4];
-+ union {
-+ __be16 optical_wavelength;
-+ u8 cable_spec;
-+ };
-+ u8 reserved62;
-+ u8 cc_base;
-+};
-+
-+struct __packed sfp_eeprom_ext {
-+ __be16 options;
-+ u8 br_max;
-+ u8 br_min;
-+ char vendor_sn[16];
-+ char datecode[8];
-+ u8 diagmon;
-+ u8 enhopts;
-+ u8 sff8472_compliance;
-+ u8 cc_ext;
-+};
-+
-+struct __packed sfp_eeprom_id {
-+ struct sfp_eeprom_base base;
-+ struct sfp_eeprom_ext ext;
-+};
-+
-+/* SFP EEPROM registers */
-+enum {
-+ SFP_PHYS_ID = 0x00,
-+ SFP_PHYS_EXT_ID = 0x01,
-+ SFP_CONNECTOR = 0x02,
-+ SFP_COMPLIANCE = 0x03,
-+ SFP_ENCODING = 0x0b,
-+ SFP_BR_NOMINAL = 0x0c,
-+ SFP_RATE_ID = 0x0d,
-+ SFP_LINK_LEN_SM_KM = 0x0e,
-+ SFP_LINK_LEN_SM_100M = 0x0f,
-+ SFP_LINK_LEN_50UM_OM2_10M = 0x10,
-+ SFP_LINK_LEN_62_5UM_OM1_10M = 0x11,
-+ SFP_LINK_LEN_COPPER_1M = 0x12,
-+ SFP_LINK_LEN_50UM_OM4_10M = 0x12,
-+ SFP_LINK_LEN_50UM_OM3_10M = 0x13,
-+ SFP_VENDOR_NAME = 0x14,
-+ SFP_VENDOR_OUI = 0x25,
-+ SFP_VENDOR_PN = 0x28,
-+ SFP_VENDOR_REV = 0x38,
-+ SFP_OPTICAL_WAVELENGTH_MSB = 0x3c,
-+ SFP_OPTICAL_WAVELENGTH_LSB = 0x3d,
-+ SFP_CABLE_SPEC = 0x3c,
-+ SFP_CC_BASE = 0x3f,
-+ SFP_OPTIONS = 0x40, /* 2 bytes, MSB, LSB */
-+ SFP_BR_MAX = 0x42,
-+ SFP_BR_MIN = 0x43,
-+ SFP_VENDOR_SN = 0x44,
-+ SFP_DATECODE = 0x54,
-+ SFP_DIAGMON = 0x5c,
-+ SFP_ENHOPTS = 0x5d,
-+ SFP_SFF8472_COMPLIANCE = 0x5e,
-+ SFP_CC_EXT = 0x5f,
-+
-+ SFP_PHYS_ID_SFP = 0x03,
-+ SFP_PHYS_EXT_ID_SFP = 0x04,
-+ SFP_CONNECTOR_UNSPEC = 0x00,
-+ /* codes 01-05 not supportable on SFP, but some modules have single SC */
-+ SFP_CONNECTOR_SC = 0x01,
-+ SFP_CONNECTOR_FIBERJACK = 0x06,
-+ SFP_CONNECTOR_LC = 0x07,
-+ SFP_CONNECTOR_MT_RJ = 0x08,
-+ SFP_CONNECTOR_MU = 0x09,
-+ SFP_CONNECTOR_SG = 0x0a,
-+ SFP_CONNECTOR_OPTICAL_PIGTAIL = 0x0b,
-+ SFP_CONNECTOR_MPO_1X12 = 0x0c,
-+ SFP_CONNECTOR_MPO_2X16 = 0x0d,
-+ SFP_CONNECTOR_HSSDC_II = 0x20,
-+ SFP_CONNECTOR_COPPER_PIGTAIL = 0x21,
-+ SFP_CONNECTOR_RJ45 = 0x22,
-+ SFP_CONNECTOR_NOSEPARATE = 0x23,
-+ SFP_CONNECTOR_MXC_2X16 = 0x24,
-+ SFP_ENCODING_UNSPEC = 0x00,
-+ SFP_ENCODING_8B10B = 0x01,
-+ SFP_ENCODING_4B5B = 0x02,
-+ SFP_ENCODING_NRZ = 0x03,
-+ SFP_ENCODING_MANCHESTER = 0x04,
-+ SFP_OPTIONS_HIGH_POWER_LEVEL = BIT(13),
-+ SFP_OPTIONS_PAGING_A2 = BIT(12),
-+ SFP_OPTIONS_RETIMER = BIT(11),
-+ SFP_OPTIONS_COOLED_XCVR = BIT(10),
-+ SFP_OPTIONS_POWER_DECL = BIT(9),
-+ SFP_OPTIONS_RX_LINEAR_OUT = BIT(8),
-+ SFP_OPTIONS_RX_DECISION_THRESH = BIT(7),
-+ SFP_OPTIONS_TUNABLE_TX = BIT(6),
-+ SFP_OPTIONS_RATE_SELECT = BIT(5),
-+ SFP_OPTIONS_TX_DISABLE = BIT(4),
-+ SFP_OPTIONS_TX_FAULT = BIT(3),
-+ SFP_OPTIONS_LOS_INVERTED = BIT(2),
-+ SFP_OPTIONS_LOS_NORMAL = BIT(1),
-+ SFP_DIAGMON_DDM = BIT(6),
-+ SFP_DIAGMON_INT_CAL = BIT(5),
-+ SFP_DIAGMON_EXT_CAL = BIT(4),
-+ SFP_DIAGMON_RXPWR_AVG = BIT(3),
-+ SFP_DIAGMON_ADDRMODE = BIT(2),
-+ SFP_ENHOPTS_ALARMWARN = BIT(7),
-+ SFP_ENHOPTS_SOFT_TX_DISABLE = BIT(6),
-+ SFP_ENHOPTS_SOFT_TX_FAULT = BIT(5),
-+ SFP_ENHOPTS_SOFT_RX_LOS = BIT(4),
-+ SFP_ENHOPTS_SOFT_RATE_SELECT = BIT(3),
-+ SFP_ENHOPTS_APP_SELECT_SFF8079 = BIT(2),
-+ SFP_ENHOPTS_SOFT_RATE_SFF8431 = BIT(1),
-+ SFP_SFF8472_COMPLIANCE_NONE = 0x00,
-+ SFP_SFF8472_COMPLIANCE_REV9_3 = 0x01,
-+ SFP_SFF8472_COMPLIANCE_REV9_5 = 0x02,
-+ SFP_SFF8472_COMPLIANCE_REV10_2 = 0x03,
-+ SFP_SFF8472_COMPLIANCE_REV10_4 = 0x04,
-+ SFP_SFF8472_COMPLIANCE_REV11_0 = 0x05,
-+ SFP_SFF8472_COMPLIANCE_REV11_3 = 0x06,
-+ SFP_SFF8472_COMPLIANCE_REV11_4 = 0x07,
-+ SFP_SFF8472_COMPLIANCE_REV12_0 = 0x08,
-+};
-+
-+/* SFP Diagnostics */
-+enum {
-+ /* Alarm and warnings stored MSB at lower address then LSB */
-+ SFP_TEMP_HIGH_ALARM = 0x00,
-+ SFP_TEMP_LOW_ALARM = 0x02,
-+ SFP_TEMP_HIGH_WARN = 0x04,
-+ SFP_TEMP_LOW_WARN = 0x06,
-+ SFP_VOLT_HIGH_ALARM = 0x08,
-+ SFP_VOLT_LOW_ALARM = 0x0a,
-+ SFP_VOLT_HIGH_WARN = 0x0c,
-+ SFP_VOLT_LOW_WARN = 0x0e,
-+ SFP_BIAS_HIGH_ALARM = 0x10,
-+ SFP_BIAS_LOW_ALARM = 0x12,
-+ SFP_BIAS_HIGH_WARN = 0x14,
-+ SFP_BIAS_LOW_WARN = 0x16,
-+ SFP_TXPWR_HIGH_ALARM = 0x18,
-+ SFP_TXPWR_LOW_ALARM = 0x1a,
-+ SFP_TXPWR_HIGH_WARN = 0x1c,
-+ SFP_TXPWR_LOW_WARN = 0x1e,
-+ SFP_RXPWR_HIGH_ALARM = 0x20,
-+ SFP_RXPWR_LOW_ALARM = 0x22,
-+ SFP_RXPWR_HIGH_WARN = 0x24,
-+ SFP_RXPWR_LOW_WARN = 0x26,
-+ SFP_LASER_TEMP_HIGH_ALARM = 0x28,
-+ SFP_LASER_TEMP_LOW_ALARM = 0x2a,
-+ SFP_LASER_TEMP_HIGH_WARN = 0x2c,
-+ SFP_LASER_TEMP_LOW_WARN = 0x2e,
-+ SFP_TEC_CUR_HIGH_ALARM = 0x30,
-+ SFP_TEC_CUR_LOW_ALARM = 0x32,
-+ SFP_TEC_CUR_HIGH_WARN = 0x34,
-+ SFP_TEC_CUR_LOW_WARN = 0x36,
-+ SFP_CAL_RXPWR4 = 0x38,
-+ SFP_CAL_RXPWR3 = 0x3c,
-+ SFP_CAL_RXPWR2 = 0x40,
-+ SFP_CAL_RXPWR1 = 0x44,
-+ SFP_CAL_RXPWR0 = 0x48,
-+ SFP_CAL_TXI_SLOPE = 0x4c,
-+ SFP_CAL_TXI_OFFSET = 0x4e,
-+ SFP_CAL_TXPWR_SLOPE = 0x50,
-+ SFP_CAL_TXPWR_OFFSET = 0x52,
-+ SFP_CAL_T_SLOPE = 0x54,
-+ SFP_CAL_T_OFFSET = 0x56,
-+ SFP_CAL_V_SLOPE = 0x58,
-+ SFP_CAL_V_OFFSET = 0x5a,
-+ SFP_CHKSUM = 0x5f,
-+
-+ SFP_TEMP = 0x60,
-+ SFP_VCC = 0x62,
-+ SFP_TX_BIAS = 0x64,
-+ SFP_TX_POWER = 0x66,
-+ SFP_RX_POWER = 0x68,
-+ SFP_LASER_TEMP = 0x6a,
-+ SFP_TEC_CUR = 0x6c,
-+
-+ SFP_STATUS = 0x6e,
-+ SFP_ALARM = 0x70,
-+
-+ SFP_EXT_STATUS = 0x76,
-+ SFP_VSL = 0x78,
-+ SFP_PAGE = 0x7f,
-+};
-+
-+#endif