1 files changed, 0 insertions, 84 deletions
diff --git a/target/linux/mvebu/patches-4.4/210-ARM-dts-armada388-clearfog-add-SFP-module-support.patch b/target/linux/mvebu/patches-4.4/210-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
deleted file mode 100644
index 9efcff905d..0000000000
--- a/target/linux/mvebu/patches-4.4/210-ARM-dts-armada388-clearfog-add-SFP-module-support.patch
+++ /dev/null
@@ -1,84 +0,0 @@
-From 63ff73593c2f5d3fc1cba479321d192caaca48aa Mon Sep 17 00:00:00 2001
-From: Russell King <rmk+kernel@arm.linux.org.uk>
-Date: Sat, 12 Sep 2015 18:43:39 +0100
-Subject: [PATCH 738/744] ARM: dts: armada388-clearfog: add SFP module support
-
-Add SFP module support for Clearfog using the SFP phylink support.
-
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/boot/dts/armada-388-clearfog.dts | 44 ++++++++-----------------------
- 1 file changed, 11 insertions(+), 33 deletions(-)
-
---- a/arch/arm/boot/dts/armada-388-clearfog.dts
-+++ b/arch/arm/boot/dts/armada-388-clearfog.dts
-@@ -90,16 +90,12 @@
- 			};
- 
- 			ethernet@34000 {
-+				managed = "in-band-status";
- 				phy-mode = "sgmii";
- 				buffer-manager = <&bm>;
- 				bm,pool-long = <3>;
- 				bm,pool-short = <1>;
- 				status = "okay";
--
--				fixed-link {
--					speed = <1000>;
--					full-duplex;
--				};
- 			};
- 
- 			i2c@11000 {
-@@ -183,34 +179,6 @@
- 						output-low;
- 						line-name = "m.2 devslp";
- 					};
--					sfp_los {
--						/* SFP loss of signal */
--						gpio-hog;
--						gpios = <12 GPIO_ACTIVE_HIGH>;
--						input;
--						line-name = "sfp-los";
--					};
--					sfp_tx_fault {
--						/* SFP laser fault */
--						gpio-hog;
--						gpios = <13 GPIO_ACTIVE_HIGH>;
--						input;
--						line-name = "sfp-tx-fault";
--					};
--					sfp_tx_disable {
--						/* SFP transmit disable */
--						gpio-hog;
--						gpios = <14 GPIO_ACTIVE_HIGH>;
--						output-low;
--						line-name = "sfp-tx-disable";
--					};
--					sfp_mod_def0 {
--						/* SFP module present */
--						gpio-hog;
--						gpios = <15 GPIO_ACTIVE_LOW>;
--						input;
--						line-name = "sfp-mod-def0";
--					};
- 				};
- 
- 				/* The MCP3021 is 100kHz clock only */
-@@ -374,6 +342,16 @@
- 		};
- 	};
- 
-+	sfp: sfp {
-+		compatible = "sff,sfp";
-+		i2c-bus = <&i2c1>;
-+		los-gpio = <&expander0 12 GPIO_ACTIVE_HIGH>;
-+		moddef0-gpio = <&expander0 15 GPIO_ACTIVE_LOW>;
-+		sfp,ethernet = <&eth2>;
-+		tx-disable-gpio = <&expander0 14 GPIO_ACTIVE_HIGH>;
-+		tx-fault-gpio = <&expander0 13 GPIO_ACTIVE_HIGH>;
-+	};
-+
- 	dsa@0 {
- 		compatible = "marvell,dsa";
- 		dsa,ethernet = <&eth1>;