aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch')
-rw-r--r--target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch611
1 files changed, 611 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch b/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch
new file mode 100644
index 0000000000..b25d71071f
--- /dev/null
+++ b/target/linux/mvebu/patches-4.4/053-ARM-dts-Add-SolidRun-Armada-388-Clearfog-A1-DT-file.patch
@@ -0,0 +1,611 @@
+From 4c945e8556ec7ea5b19d4f8721b212f468656e0d Mon Sep 17 00:00:00 2001
+From: Russell King <rmk+kernel@arm.linux.org.uk>
+Date: Sun, 6 Dec 2015 21:52:06 +0000
+Subject: [PATCH] ARM: dts: Add SolidRun Armada 388 Clearfog A1 DT file
+
+Add support for the SolidRun Armada 388 Clearfog A1 board. This board
+has an Armada 388 microsom, dedicated gigabit ethernet, six switched
+gigabit ethernet ports, SFP cage, two Mini-PCIe/mSATA slots, a m.2 SATA
+slot, and a MikroBUS connector to allow MikroBUS modules to be added.
+
+This DT file adds support for all board facilities with the exception
+of full SFP support.
+
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
+---
+ arch/arm/boot/dts/Makefile | 1 +
+ arch/arm/boot/dts/armada-388-clearfog.dts | 456 +++++++++++++++++++++
+ .../arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 115 ++++++
+ 3 files changed, 572 insertions(+)
+ create mode 100644 arch/arm/boot/dts/armada-388-clearfog.dts
+ create mode 100644 arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -750,6 +750,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
+ armada-385-linksys-cobra.dtb \
+ armada-385-linksys-rango.dtb \
+ armada-385-linksys-shelby.dtb \
++ armada-388-clearfog.dtb \
+ armada-388-db.dtb \
+ armada-388-gp.dtb \
+ armada-388-rd.dtb
+--- /dev/null
++++ b/arch/arm/boot/dts/armada-388-clearfog.dts
+@@ -0,0 +1,456 @@
++/*
++ * Device Tree file for SolidRun Clearfog revision A1 rev 2.0 (88F6828)
++ *
++ * Copyright (C) 2015 Russell King
++ *
++ * This board is in development; the contents of this file work with
++ * the A1 rev 2.0 of the board, which does not represent final
++ * production board. Things will change, don't expect this file to
++ * remain compatible info the future.
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This file is distributed in the hope that it will be useful
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++#include "armada-388.dtsi"
++#include "armada-38x-solidrun-microsom.dtsi"
++
++/ {
++ model = "SolidRun Clearfog A1";
++ compatible = "solidrun,clearfog-a1", "marvell,armada388",
++ "marvell,armada385", "marvell,armada380";
++
++ aliases {
++ /* So that mvebu u-boot can update the MAC addresses */
++ ethernet1 = &eth0;
++ ethernet2 = &eth1;
++ ethernet3 = &eth2;
++ };
++
++ chosen {
++ stdout-path = "serial0:115200n8";
++ };
++
++ reg_3p3v: regulator-3p3v {
++ compatible = "regulator-fixed";
++ regulator-name = "3P3V";
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-always-on;
++ };
++
++ soc {
++ internal-regs {
++ ethernet@30000 {
++ phy-mode = "sgmii";
++ status = "okay";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ ethernet@34000 {
++ phy-mode = "sgmii";
++ status = "okay";
++
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++
++ i2c@11000 {
++ /* Is there anything on this? */
++ clock-frequency = <100000>;
++ pinctrl-0 = <&i2c0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ /*
++ * PCA9655 GPIO expander, up to 1MHz clock.
++ * 0-CON3 CLKREQ#
++ * 1-CON3 PERST#
++ * 2-CON2 PERST#
++ * 3-CON3 W_DISABLE
++ * 4-CON2 CLKREQ#
++ * 5-USB3 overcurrent
++ * 6-USB3 power
++ * 7-CON2 W_DISABLE
++ * 8-JP4 P1
++ * 9-JP4 P4
++ * 10-JP4 P5
++ * 11-m.2 DEVSLP
++ * 12-SFP_LOS
++ * 13-SFP_TX_FAULT
++ * 14-SFP_TX_DISABLE
++ * 15-SFP_MOD_DEF0
++ */
++ expander0: gpio-expander@20 {
++ /*
++ * This is how it should be:
++ * compatible = "onnn,pca9655",
++ * "nxp,pca9555";
++ * but you can't do this because of
++ * the way I2C works.
++ */
++ compatible = "nxp,pca9555";
++ gpio-controller;
++ #gpio-cells = <2>;
++ reg = <0x20>;
++
++ pcie1_0_clkreq {
++ gpio-hog;
++ gpios = <0 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "pcie1.0-clkreq";
++ };
++ pcie1_0_w_disable {
++ gpio-hog;
++ gpios = <3 GPIO_ACTIVE_LOW>;
++ output-low;
++ line-name = "pcie1.0-w-disable";
++ };
++ pcie2_0_clkreq {
++ gpio-hog;
++ gpios = <4 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "pcie2.0-clkreq";
++ };
++ pcie2_0_w_disable {
++ gpio-hog;
++ gpios = <7 GPIO_ACTIVE_LOW>;
++ output-low;
++ line-name = "pcie2.0-w-disable";
++ };
++ usb3_ilimit {
++ gpio-hog;
++ gpios = <5 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "usb3-current-limit";
++ };
++ usb3_power {
++ gpio-hog;
++ gpios = <6 GPIO_ACTIVE_HIGH>;
++ output-high;
++ line-name = "usb3-power";
++ };
++ m2_devslp {
++ gpio-hog;
++ gpios = <11 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "m.2 devslp";
++ };
++ sfp_los {
++ /* SFP loss of signal */
++ gpio-hog;
++ gpios = <12 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "sfp-los";
++ };
++ sfp_tx_fault {
++ /* SFP laser fault */
++ gpio-hog;
++ gpios = <13 GPIO_ACTIVE_HIGH>;
++ input;
++ line-name = "sfp-tx-fault";
++ };
++ sfp_tx_disable {
++ /* SFP transmit disable */
++ gpio-hog;
++ gpios = <14 GPIO_ACTIVE_HIGH>;
++ output-low;
++ line-name = "sfp-tx-disable";
++ };
++ sfp_mod_def0 {
++ /* SFP module present */
++ gpio-hog;
++ gpios = <15 GPIO_ACTIVE_LOW>;
++ input;
++ line-name = "sfp-mod-def0";
++ };
++ };
++
++ /* The MCP3021 is 100kHz clock only */
++ mikrobus_adc: mcp3021@4c {
++ compatible = "microchip,mcp3021";
++ reg = <0x4c>;
++ };
++
++ /* Also something at 0x64 */
++ };
++
++ i2c@11100 {
++ /*
++ * Routed to SFP, mikrobus, and PCIe.
++ * SFP limits this to 100kHz, and requires
++ * an AT24C01A/02/04 with address pins tied
++ * low, which takes addresses 0x50 and 0x51.
++ * Mikrobus doesn't specify beyond an I2C
++ * bus being present.
++ * PCIe uses ARP to assign addresses, or
++ * 0x63-0x64.
++ */
++ clock-frequency = <100000>;
++ pinctrl-0 = <&clearfog_i2c1_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ };
++
++ mdio@72004 {
++ pinctrl-0 = <&mdio_pins>;
++ pinctrl-names = "default";
++
++ phy_dedicated: ethernet-phy@0 {
++ /*
++ * Annoyingly, the marvell phy driver
++ * configures the LED register, rather
++ * than preserving reset-loaded setting.
++ * We undo that rubbish here.
++ */
++ marvell,reg-init = <3 16 0 0x101e>;
++ reg = <0>;
++ };
++ };
++
++ pinctrl@18000 {
++ clearfog_dsa0_clk_pins: clearfog-dsa0-clk-pins {
++ marvell,pins = "mpp46";
++ marvell,function = "ref";
++ };
++ clearfog_dsa0_pins: clearfog-dsa0-pins {
++ marvell,pins = "mpp23", "mpp41";
++ marvell,function = "gpio";
++ };
++ clearfog_i2c1_pins: i2c1-pins {
++ /* SFP, PCIe, mSATA, mikrobus */
++ marvell,pins = "mpp26", "mpp27";
++ marvell,function = "i2c1";
++ };
++ clearfog_sdhci_cd_pins: clearfog-sdhci-cd-pins {
++ marvell,pins = "mpp20";
++ marvell,function = "gpio";
++ };
++ clearfog_sdhci_pins: clearfog-sdhci-pins {
++ marvell,pins = "mpp21", "mpp28",
++ "mpp37", "mpp38",
++ "mpp39", "mpp40";
++ marvell,function = "sd0";
++ };
++ clearfog_spi1_cs_pins: spi1-cs-pins {
++ marvell,pins = "mpp55";
++ marvell,function = "spi1";
++ };
++ mikro_pins: mikro-pins {
++ /* int: mpp22 rst: mpp29 */
++ marvell,pins = "mpp22", "mpp29";
++ marvell,function = "gpio";
++ };
++ mikro_spi_pins: mikro-spi-pins {
++ marvell,pins = "mpp43";
++ marvell,function = "spi1";
++ };
++ mikro_uart_pins: mikro-uart-pins {
++ marvell,pins = "mpp24", "mpp25";
++ marvell,function = "ua1";
++ };
++ rear_button_pins: rear-button-pins {
++ marvell,pins = "mpp34";
++ marvell,function = "gpio";
++ };
++ };
++
++ sata@a8000 {
++ /* pinctrl? */
++ status = "okay";
++ };
++
++ sata@e0000 {
++ /* pinctrl? */
++ status = "okay";
++ };
++
++ sdhci@d8000 {
++ bus-width = <4>;
++ cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
++ no-1-8-v;
++ pinctrl-0 = <&clearfog_sdhci_pins
++ &clearfog_sdhci_cd_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ vmmc = <&reg_3p3v>;
++ wp-inverted;
++ };
++
++ serial@12100 {
++ /* mikrobus uart */
++ pinctrl-0 = <&mikro_uart_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ };
++
++ spi@10680 {
++ /*
++ * We don't seem to have the W25Q32 on the
++ * A1 Rev 2.0 boards, so disable SPI.
++ * CS0: W25Q32 (doesn't appear to be present)
++ * CS1:
++ * CS2: mikrobus
++ */
++ pinctrl-0 = <&spi1_pins
++ &clearfog_spi1_cs_pins
++ &mikro_spi_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++
++ spi-flash@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ compatible = "w25q32", "jedec,spi-nor";
++ reg = <0>; /* Chip select 0 */
++ spi-max-frequency = <3000000>;
++ status = "disabled";
++ };
++ };
++
++ usb@58000 {
++ /* CON3, nearest power. */
++ status = "okay";
++ };
++
++ usb3@f0000 {
++ /* CON2, nearest CPU, USB2 only. */
++ status = "okay";
++ };
++
++ usb3@f8000 {
++ /* CON7 */
++ status = "okay";
++ };
++ };
++
++ pcie-controller {
++ status = "okay";
++ /*
++ * The two PCIe units are accessible through
++ * the mini-PCIe connectors on the board.
++ */
++ pcie@2,0 {
++ /* Port 1, Lane 0. CON3, nearest power. */
++ reset-gpios = <&expander0 1 GPIO_ACTIVE_LOW>;
++ status = "okay";
++ };
++ pcie@3,0 {
++ /* Port 2, Lane 0. CON2, nearest CPU. */
++ reset-gpios = <&expander0 2 GPIO_ACTIVE_LOW>;
++ status = "okay";
++ };
++ };
++ };
++
++ dsa@0 {
++ compatible = "marvell,dsa";
++ dsa,ethernet = <&eth1>;
++ dsa,mii-bus = <&mdio>;
++ pinctrl-0 = <&clearfog_dsa0_clk_pins &clearfog_dsa0_pins>;
++ pinctrl-names = "default";
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ switch@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <4 0>;
++
++ port@0 {
++ reg = <0>;
++ label = "lan1";
++ };
++
++ port@1 {
++ reg = <1>;
++ label = "lan2";
++ };
++
++ port@2 {
++ reg = <2>;
++ label = "lan3";
++ };
++
++ port@3 {
++ reg = <3>;
++ label = "lan4";
++ };
++
++ port@4 {
++ reg = <4>;
++ label = "lan5";
++ };
++
++ port@5 {
++ reg = <5>;
++ label = "cpu";
++ };
++
++ port@6 {
++ /* 88E1512 external phy */
++ reg = <6>;
++ label = "lan6";
++ fixed-link {
++ speed = <1000>;
++ full-duplex;
++ };
++ };
++ };
++ };
++
++ gpio-keys {
++ compatible = "gpio-keys";
++ pinctrl-0 = <&rear_button_pins>;
++ pinctrl-names = "default";
++
++ button_0 {
++ /* The rear SW3 button */
++ label = "Rear Button";
++ gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
++ linux,can-disable;
++ linux,code = <BTN_0>;
++ };
++ };
++};
+--- /dev/null
++++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
+@@ -0,0 +1,115 @@
++/*
++ * Device Tree file for SolidRun Armada 38x Microsom
++ *
++ * Copyright (C) 2015 Russell King
++ *
++ * This board is in development; the contents of this file work with
++ * the A1 rev 2.0 of the board, which does not represent final
++ * production board. Things will change, don't expect this file to
++ * remain compatible info the future.
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This file is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * version 2 as published by the Free Software Foundation.
++ *
++ * This file is distributed in the hope that it will be useful
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++#include <dt-bindings/input/input.h>
++#include <dt-bindings/gpio/gpio.h>
++
++/ {
++ memory {
++ device_type = "memory";
++ reg = <0x00000000 0x10000000>; /* 256 MB */
++ };
++
++ soc {
++ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
++ MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
++ MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
++ MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>;
++
++ internal-regs {
++ ethernet@70000 {
++ pinctrl-0 = <&ge0_rgmii_pins>;
++ pinctrl-names = "default";
++ phy = <&phy_dedicated>;
++ phy-mode = "rgmii-id";
++ status = "okay";
++ };
++
++ mdio@72004 {
++ /*
++ * Add the phy clock here, so the phy can be
++ * accessed to read its IDs prior to binding
++ * with the driver.
++ */
++ pinctrl-0 = <&mdio_pins &microsom_phy_clk_pins>;
++ pinctrl-names = "default";
++
++ phy_dedicated: ethernet-phy@0 {
++ /*
++ * Annoyingly, the marvell phy driver
++ * configures the LED register, rather
++ * than preserving reset-loaded setting.
++ * We undo that rubbish here.
++ */
++ marvell,reg-init = <3 16 0 0x101e>;
++ reg = <0>;
++ };
++ };
++
++ pinctrl@18000 {
++ microsom_phy_clk_pins: microsom-phy-clk-pins {
++ marvell,pins = "mpp45";
++ marvell,function = "ref";
++ };
++ };
++
++ rtc@a3800 {
++ /*
++ * If the rtc doesn't work, run "date reset"
++ * twice in u-boot.
++ */
++ status = "okay";
++ };
++
++ serial@12000 {
++ pinctrl-0 = <&uart0_pins>;
++ pinctrl-names = "default";
++ status = "okay";
++ };
++ };
++ };
++};