1 files changed, 0 insertions, 94 deletions
diff --git a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch b/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch
deleted file mode 100644
index b874d8265a..0000000000
--- a/target/linux/mvebu/patches-4.14/450-reprobe_sfp_phy.patch
+++ /dev/null
@@ -1,94 +0,0 @@
-From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jonas.gorski@gmail.com>
-Date: Thu, 29 Sep 2016 11:44:39 +0200
-Subject: [PATCH] sfp: retry phy probe if unsuccessful
-
-Some phys seem to take longer than 50 ms to come out of reset, so retry
-until we find a phy.
-
-Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
----
- drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++-------------
- 1 file changed, 25 insertions(+), 13 deletions(-)
-
---- a/drivers/net/phy/sfp.c
-+++ b/drivers/net/phy/sfp.c
-@@ -506,7 +506,7 @@ static void sfp_sm_phy_detach(struct sfp
- 	sfp->mod_phy = NULL;
- }
- 
--static void sfp_sm_probe_phy(struct sfp *sfp)
-+static int sfp_sm_probe_phy(struct sfp *sfp)
- {
- 	struct phy_device *phy;
- 	int err;
-@@ -516,11 +516,11 @@ static void sfp_sm_probe_phy(struct sfp
- 	phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
- 	if (phy == ERR_PTR(-ENODEV)) {
- 		dev_info(sfp->dev, "no PHY detected\n");
--		return;
-+		return -EAGAIN;
- 	}
- 	if (IS_ERR(phy)) {
- 		dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
--		return;
-+		return PTR_ERR(phy);
- 	}
- 
- 	err = sfp_add_phy(sfp->sfp_bus, phy);
-@@ -528,11 +528,13 @@ static void sfp_sm_probe_phy(struct sfp
- 		phy_device_remove(phy);
- 		phy_device_free(phy);
- 		dev_err(sfp->dev, "sfp_add_phy failed: %d\n", err);
--		return;
-+		return err;
- 	}
- 
- 	sfp->mod_phy = phy;
- 	phy_start(phy);
-+
-+	return 0;
- }
- 
- static void sfp_sm_link_up(struct sfp *sfp)
-@@ -578,14 +580,9 @@ static void sfp_sm_fault(struct sfp *sfp
- 
- static void sfp_sm_mod_init(struct sfp *sfp)
- {
--	sfp_module_tx_enable(sfp);
-+	int ret = 0;
- 
--	/* Wait t_init before indicating that the link is up, provided the
--	 * current state indicates no TX_FAULT.  If TX_FAULT clears before
--	 * this time, that's fine too.
--	 */
--	sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
--	sfp->sm_retries = 5;
-+	sfp_module_tx_enable(sfp);
- 
- 	/* Setting the serdes link mode is guesswork: there's no
- 	 * field in the EEPROM which indicates what mode should
-@@ -599,7 +596,22 @@ static void sfp_sm_mod_init(struct sfp *
- 	if (sfp->id.base.e1000_base_t ||
- 	    sfp->id.base.e100_base_lx ||
- 	    sfp->id.base.e100_base_fx)
--		sfp_sm_probe_phy(sfp);
-+		ret = sfp_sm_probe_phy(sfp);
-+
-+	if (!ret) {
-+		/* Wait t_init before indicating that the link is up, provided
-+		 * the current state indicates no TX_FAULT.  If TX_FAULT clears
-+		 * this time, that's fine too.
-+		 */
-+		sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
-+		sfp->sm_retries = 5;
-+		return;
-+	}
-+
-+	if (ret == -EAGAIN)
-+		sfp_sm_set_timer(sfp, T_PROBE_RETRY);
-+	else
-+		sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
- }
- 
- static int sfp_sm_mod_probe(struct sfp *sfp)