1 files changed, 0 insertions, 69 deletions
diff --git a/target/linux/mvebu/patches-3.18/017-define_and_use_common_armada_xp_spi_pinctrl_setting.patch b/target/linux/mvebu/patches-3.18/017-define_and_use_common_armada_xp_spi_pinctrl_setting.patch
deleted file mode 100644
index 9085db00d2..0000000000
--- a/target/linux/mvebu/patches-3.18/017-define_and_use_common_armada_xp_spi_pinctrl_setting.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From 547c653b64022618250ca9c7c30151927509ae98 Mon Sep 17 00:00:00 2001
-From: Arnaud Ebalard <arno@natisbad.org>
-Date: Sat, 22 Nov 2014 00:46:39 +0100
-Subject: arm: mvebu: define and use common Armada XP SPI pinctrl setting
-
-This patch defines common Armada XP pinctrl settings in armada-xp.dtsi
-for the supported SPI interface (MPP36-39) and use it as default
-for Armada XP spi interface. That being done, it removes the now
-redundant definitions in armada-xp-axpwifiap.dts.
-
-Note: this patch has the potential to break out-of-tree users w/o
-specific pinctrl settings for their spi interfaces if the default
-above does not match their config (i.e. if they do not use CS0).
-
-Acked-by: Andrew Lunn <andrew@lunn.ch>
-Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
-Link: https://lkml.kernel.org/r/d404b7abd80ee5a0fd8e8d3586d33cd37740d589.1416613429.git.arno@natisbad.org
-Signed-off-by: Jason Cooper <jason@lakedaemon.net>
-
---- a/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-+++ b/arch/arm/boot/dts/armada-xp-axpwifiap.dts
-@@ -100,8 +100,6 @@
- 
- 			spi0: spi@10600 {
- 				status = "okay";
--				pinctrl-0 = <&pmx_spi>;
--				pinctrl-names = "default";
- 
- 				spi-flash@0 {
- 					#address-cells = <1>;
-@@ -138,11 +136,6 @@
- 		marvell,function = "gpio";
- 	};
- 
--	pmx_spi: pmx-spi {
--		marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
--		marvell,function = "spi";
--	};
--
- 	pmx_phy_int: pmx-phy-int {
- 		marvell,pins = "mpp32";
- 		marvell,function = "gpio";
---- a/arch/arm/boot/dts/armada-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-xp.dtsi
-@@ -43,6 +43,11 @@
- 				wt-override;
- 			};
- 
-+			spi0: spi@10600 {
-+				pinctrl-0 = <&spi0_pins>;
-+				pinctrl-names = "default";
-+			};
-+
- 			i2c0: i2c@11000 {
- 				compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
- 				reg = <0x11000 0x100>;
-@@ -248,6 +253,12 @@
- 		marvell,function = "sd0";
- 	};
- 
-+	spi0_pins: spi0-pins {
-+		marvell,pins = "mpp36", "mpp37",
-+			       "mpp38", "mpp39";
-+		marvell,function = "spi";
-+	};
-+
- 	uart2_pins: uart2-pins {
- 		marvell,pins = "mpp42", "mpp43";
- 		marvell,function = "uart2";