diff options
Diffstat (limited to 'target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch')
| -rw-r--r-- | target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch | 200 |
1 files changed, 200 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch b/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch new file mode 100644 index 0000000000..4d5761172a --- /dev/null +++ b/target/linux/mvebu/patches-3.10/0121-mtd-nand-pxa3xx-Remove-unneeded-internal-cmdset.patch @@ -0,0 +1,200 @@ +From 45d36da3f284cd424b0ac2060cfccc17f9979552 Mon Sep 17 00:00:00 2001 +From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> +Date: Mon, 12 Aug 2013 14:14:54 -0300 +Subject: [PATCH 121/203] mtd: nand: pxa3xx: Remove unneeded internal cmdset + +Use the defined macros for NAND command instead of using a constant +internal structure. This commit is only a cleanup, there's no +functionality modification. + +Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> +Tested-by: Daniel Mack <zonque@gmail.com> +Signed-off-by: Brian Norris <computersforpeace@gmail.com> +Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> +--- + drivers/mtd/nand/pxa3xx_nand.c | 63 ++++++++------------------- + include/linux/platform_data/mtd-nand-pxa3xx.h | 13 ------ + 2 files changed, 17 insertions(+), 59 deletions(-) + +--- a/drivers/mtd/nand/pxa3xx_nand.c ++++ b/drivers/mtd/nand/pxa3xx_nand.c +@@ -131,7 +131,6 @@ enum pxa3xx_nand_variant { + + struct pxa3xx_nand_host { + struct nand_chip chip; +- struct pxa3xx_nand_cmdset *cmdset; + struct mtd_info *mtd; + void *info_data; + +@@ -205,23 +204,6 @@ static bool use_dma = 1; + module_param(use_dma, bool, 0444); + MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW"); + +-/* +- * Default NAND flash controller configuration setup by the +- * bootloader. This configuration is used only when pdata->keep_config is set +- */ +-static struct pxa3xx_nand_cmdset default_cmdset = { +- .read1 = 0x3000, +- .read2 = 0x0050, +- .program = 0x1080, +- .read_status = 0x0070, +- .read_id = 0x0090, +- .erase = 0xD060, +- .reset = 0x00FF, +- .lock = 0x002A, +- .unlock = 0x2423, +- .lock_status = 0x007A, +-}; +- + static struct pxa3xx_nand_timing timing[] = { + { 40, 80, 60, 100, 80, 100, 90000, 400, 40, }, + { 10, 0, 20, 40, 30, 40, 11123, 110, 10, }, +@@ -530,7 +512,6 @@ static inline int is_buf_blank(uint8_t * + static int prepare_command_pool(struct pxa3xx_nand_info *info, int command, + uint16_t column, int page_addr) + { +- uint16_t cmd; + int addr_cycle, exec_cmd; + struct pxa3xx_nand_host *host; + struct mtd_info *mtd; +@@ -580,21 +561,17 @@ static int prepare_command_pool(struct p + switch (command) { + case NAND_CMD_READOOB: + case NAND_CMD_READ0: +- cmd = host->cmdset->read1; ++ info->buf_start = column; ++ info->ndcb0 |= NDCB0_CMD_TYPE(0) ++ | addr_cycle ++ | NAND_CMD_READ0; ++ + if (command == NAND_CMD_READOOB) +- info->buf_start = mtd->writesize + column; +- else +- info->buf_start = column; ++ info->buf_start += mtd->writesize; + +- if (unlikely(host->page_size < PAGE_CHUNK_SIZE)) +- info->ndcb0 |= NDCB0_CMD_TYPE(0) +- | addr_cycle +- | (cmd & NDCB0_CMD1_MASK); +- else +- info->ndcb0 |= NDCB0_CMD_TYPE(0) +- | NDCB0_DBC +- | addr_cycle +- | cmd; ++ /* Second command setting for large pages */ ++ if (host->page_size >= PAGE_CHUNK_SIZE) ++ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8); + + case NAND_CMD_SEQIN: + /* small page addr setting */ +@@ -625,62 +602,58 @@ static int prepare_command_pool(struct p + break; + } + +- cmd = host->cmdset->program; + info->ndcb0 |= NDCB0_CMD_TYPE(0x1) + | NDCB0_AUTO_RS + | NDCB0_ST_ROW_EN + | NDCB0_DBC +- | cmd ++ | (NAND_CMD_PAGEPROG << 8) ++ | NAND_CMD_SEQIN + | addr_cycle; + break; + + case NAND_CMD_PARAM: +- cmd = NAND_CMD_PARAM; + info->buf_count = 256; + info->ndcb0 |= NDCB0_CMD_TYPE(0) + | NDCB0_ADDR_CYC(1) + | NDCB0_LEN_OVRD +- | cmd; ++ | command; + info->ndcb1 = (column & 0xFF); + info->ndcb3 = 256; + info->data_size = 256; + break; + + case NAND_CMD_READID: +- cmd = host->cmdset->read_id; + info->buf_count = host->read_id_bytes; + info->ndcb0 |= NDCB0_CMD_TYPE(3) + | NDCB0_ADDR_CYC(1) +- | cmd; ++ | command; + info->ndcb1 = (column & 0xFF); + + info->data_size = 8; + break; + case NAND_CMD_STATUS: +- cmd = host->cmdset->read_status; + info->buf_count = 1; + info->ndcb0 |= NDCB0_CMD_TYPE(4) + | NDCB0_ADDR_CYC(1) +- | cmd; ++ | command; + + info->data_size = 8; + break; + + case NAND_CMD_ERASE1: +- cmd = host->cmdset->erase; + info->ndcb0 |= NDCB0_CMD_TYPE(2) + | NDCB0_AUTO_RS + | NDCB0_ADDR_CYC(3) + | NDCB0_DBC +- | cmd; ++ | (NAND_CMD_ERASE2 << 8) ++ | NAND_CMD_ERASE1; + info->ndcb1 = page_addr; + info->ndcb2 = 0; + + break; + case NAND_CMD_RESET: +- cmd = host->cmdset->reset; + info->ndcb0 |= NDCB0_CMD_TYPE(5) +- | cmd; ++ | command; + + break; + +@@ -876,7 +849,6 @@ static int pxa3xx_nand_config_flash(stru + } + + /* calculate flash information */ +- host->cmdset = &default_cmdset; + host->page_size = f->page_size; + host->read_id_bytes = (f->page_size == 2048) ? 4 : 2; + +@@ -922,7 +894,6 @@ static int pxa3xx_nand_detect_config(str + } + + host->reg_ndcr = ndcr & ~NDCR_INT_MASK; +- host->cmdset = &default_cmdset; + + host->ndtr0cs0 = nand_readl(info, NDTR0CS0); + host->ndtr1cs0 = nand_readl(info, NDTR1CS0); +--- a/include/linux/platform_data/mtd-nand-pxa3xx.h ++++ b/include/linux/platform_data/mtd-nand-pxa3xx.h +@@ -16,19 +16,6 @@ struct pxa3xx_nand_timing { + unsigned int tAR; /* ND_ALE low to ND_nRE low delay */ + }; + +-struct pxa3xx_nand_cmdset { +- uint16_t read1; +- uint16_t read2; +- uint16_t program; +- uint16_t read_status; +- uint16_t read_id; +- uint16_t erase; +- uint16_t reset; +- uint16_t lock; +- uint16_t unlock; +- uint16_t lock_status; +-}; +- + struct pxa3xx_nand_flash { + char *name; + uint32_t chip_id; |