aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch')
-rw-r--r--target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch1370
1 files changed, 0 insertions, 1370 deletions
diff --git a/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch b/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch
deleted file mode 100644
index a7ce3ed7ff..0000000000
--- a/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch
+++ /dev/null
@@ -1,1370 +0,0 @@
-From db5029d82c4f0685438ea38eb3fbaadac46a22ba Mon Sep 17 00:00:00 2001
-From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Date: Wed, 12 Jun 2013 18:02:19 -0300
-Subject: [PATCH 059/203] ARM: mvebu: Relocate Armada 370/XP PCIe device tree
- nodes
-
-Now that mbus has been added to the device tree, it's possible to
-move the PCIe nodes out of internal registers, placing it directly
-below the mbus. This is a more accurate representation of the
-hardware.
-
-Moving the PCIe nodes, we now need to introduce an extra cell to
-encode the window target ID and attribute. Since this depends on
-the PCIe port, we split the ranges translation entries, to correspond
-to each MBus window.
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
-Tested-by: Andrew Lunn <andrew@lunn.ch>
-Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
----
- arch/arm/boot/dts/armada-370-mirabox.dts | 32 +-
- arch/arm/boot/dts/armada-370-xp.dtsi | 2 +
- arch/arm/boot/dts/armada-370.dtsi | 101 +++---
- arch/arm/boot/dts/armada-xp-db.dts | 67 ++--
- arch/arm/boot/dts/armada-xp-gp.dts | 42 +--
- arch/arm/boot/dts/armada-xp-mv78230.dtsi | 222 ++++++------
- arch/arm/boot/dts/armada-xp-mv78260.dtsi | 261 ++++++++-------
- arch/arm/boot/dts/armada-xp-mv78460.dtsi | 409 ++++++++++++-----------
- arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 18 +-
- 9 files changed, 612 insertions(+), 542 deletions(-)
-
---- a/arch/arm/boot/dts/armada-370-mirabox.dts
-+++ b/arch/arm/boot/dts/armada-370-mirabox.dts
-@@ -28,6 +28,22 @@
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
- MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
-
-+ pcie-controller {
-+ status = "okay";
-+
-+ /* Internal mini-PCIe connector */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+
-+ /* Connected on the PCB to a USB 3.0 XHCI controller */
-+ pcie@2,0 {
-+ /* Port 1, Lane 0 */
-+ status = "okay";
-+ };
-+ };
-+
- internal-regs {
- serial@12000 {
- clock-frequency = <200000000>;
-@@ -123,22 +139,6 @@
- reg = <0x25>;
- };
- };
--
-- pcie-controller {
-- status = "okay";
--
-- /* Internal mini-PCIe connector */
-- pcie@1,0 {
-- /* Port 0, Lane 0 */
-- status = "okay";
-- };
--
-- /* Connected on the PCB to a USB 3.0 XHCI controller */
-- pcie@2,0 {
-- /* Port 1, Lane 0 */
-- status = "okay";
-- };
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/armada-370-xp.dtsi
-+++ b/arch/arm/boot/dts/armada-370-xp.dtsi
-@@ -35,6 +35,8 @@
- #size-cells = <1>;
- controller = <&mbusc>;
- interrupt-parent = <&mpic>;
-+ pcie-mem-aperture = <0xe0000000 0x8000000>;
-+ pcie-io-aperture = <0xe8000000 0x100000>;
-
- devbus-bootcs {
- compatible = "marvell,mvebu-devbus";
---- a/arch/arm/boot/dts/armada-370.dtsi
-+++ b/arch/arm/boot/dts/armada-370.dtsi
-@@ -36,6 +36,59 @@
- reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
- };
-
-+ pcie-controller {
-+ compatible = "marvell,armada-370-pcie";
-+ status = "disabled";
-+ device_type = "pci";
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bus-range = <0x00 0xff>;
-+
-+ ranges =
-+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
-+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
-+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
-+ 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-+ 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
-+
-+ pcie@1,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 58>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 5>;
-+ status = "disabled";
-+ };
-+
-+ pcie@2,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-+ reg = <0x1000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 62>;
-+ marvell,pcie-port = <1>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 9>;
-+ status = "disabled";
-+ };
-+ };
-+
- internal-regs {
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
-@@ -174,54 +227,6 @@
- 0x18304 0x4>;
- status = "okay";
- };
--
-- pcie-controller {
-- compatible = "marvell,armada-370-pcie";
-- status = "disabled";
-- device_type = "pci";
--
-- #address-cells = <3>;
-- #size-cells = <2>;
--
-- bus-range = <0x00 0xff>;
--
-- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
-- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
-- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
-- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
--
-- pcie@1,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-- reg = <0x0800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 58>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 5>;
-- status = "disabled";
-- };
--
-- pcie@2,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-- reg = <0x1000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 62>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 9>;
-- status = "disabled";
-- };
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-db.dts
-+++ b/arch/arm/boot/dts/armada-xp-db.dts
-@@ -62,6 +62,39 @@
- };
- };
-
-+ pcie-controller {
-+ status = "okay";
-+
-+ /*
-+ * All 6 slots are physically present as
-+ * standard PCIe slots on the board.
-+ */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+ pcie@2,0 {
-+ /* Port 0, Lane 1 */
-+ status = "okay";
-+ };
-+ pcie@3,0 {
-+ /* Port 0, Lane 2 */
-+ status = "okay";
-+ };
-+ pcie@4,0 {
-+ /* Port 0, Lane 3 */
-+ status = "okay";
-+ };
-+ pcie@9,0 {
-+ /* Port 2, Lane 0 */
-+ status = "okay";
-+ };
-+ pcie@10,0 {
-+ /* Port 3, Lane 0 */
-+ status = "okay";
-+ };
-+ };
-+
- internal-regs {
- serial@12000 {
- clock-frequency = <250000000>;
-@@ -155,40 +188,6 @@
- spi-max-frequency = <20000000>;
- };
- };
--
-- pcie-controller {
-- status = "okay";
--
-- /*
-- * All 6 slots are physically present as
-- * standard PCIe slots on the board.
-- */
-- pcie@1,0 {
-- /* Port 0, Lane 0 */
-- status = "okay";
-- };
-- pcie@2,0 {
-- /* Port 0, Lane 1 */
-- status = "okay";
-- };
-- pcie@3,0 {
-- /* Port 0, Lane 2 */
-- status = "okay";
-- };
-- pcie@4,0 {
-- /* Port 0, Lane 3 */
-- status = "okay";
-- };
-- pcie@9,0 {
-- /* Port 2, Lane 0 */
-- status = "okay";
-- };
-- pcie@10,0 {
-- /* Port 3, Lane 0 */
-- status = "okay";
-- };
-- };
--
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-gp.dts
-+++ b/arch/arm/boot/dts/armada-xp-gp.dts
-@@ -71,6 +71,27 @@
- };
- };
-
-+ pcie-controller {
-+ status = "okay";
-+
-+ /*
-+ * The 3 slots are physically present as
-+ * standard PCIe slots on the board.
-+ */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+ pcie@9,0 {
-+ /* Port 2, Lane 0 */
-+ status = "okay";
-+ };
-+ pcie@10,0 {
-+ /* Port 3, Lane 0 */
-+ status = "okay";
-+ };
-+ };
-+
- internal-regs {
- serial@12000 {
- clock-frequency = <250000000>;
-@@ -154,27 +175,6 @@
- spi-max-frequency = <108000000>;
- };
- };
--
-- pcie-controller {
-- status = "okay";
--
-- /*
-- * The 3 slots are physically present as
-- * standard PCIe slots on the board.
-- */
-- pcie@1,0 {
-- /* Port 0, Lane 0 */
-- status = "okay";
-- };
-- pcie@9,0 {
-- /* Port 2, Lane 0 */
-- status = "okay";
-- };
-- pcie@10,0 {
-- /* Port 3, Lane 0 */
-- status = "okay";
-- };
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
-@@ -44,6 +44,124 @@
- };
-
- soc {
-+ /*
-+ * MV78230 has 2 PCIe units Gen2.0: One unit can be
-+ * configured as x4 or quad x1 lanes. One unit is
-+ * x4/x1.
-+ */
-+ pcie-controller {
-+ compatible = "marvell,armada-xp-pcie";
-+ status = "disabled";
-+ device_type = "pci";
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bus-range = <0x00 0xff>;
-+
-+ ranges =
-+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
-+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
-+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
-+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
-+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
-+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
-+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
-+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
-+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
-+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
-+
-+ pcie@1,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 58>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 5>;
-+ status = "disabled";
-+ };
-+
-+ pcie@2,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-+ reg = <0x1000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 59>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <1>;
-+ clocks = <&gateclk 6>;
-+ status = "disabled";
-+ };
-+
-+ pcie@3,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-+ reg = <0x1800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 60>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <2>;
-+ clocks = <&gateclk 7>;
-+ status = "disabled";
-+ };
-+
-+ pcie@4,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-+ reg = <0x2000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 61>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <3>;
-+ clocks = <&gateclk 8>;
-+ status = "disabled";
-+ };
-+
-+ pcie@9,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-+ reg = <0x4800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 99>;
-+ marvell,pcie-port = <2>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 26>;
-+ status = "disabled";
-+ };
-+ };
-+
- internal-regs {
- pinctrl {
- compatible = "marvell,mv78230-pinctrl";
-@@ -79,108 +197,6 @@
- };
-
- /*
-- * MV78230 has 2 PCIe units Gen2.0: One unit can be
-- * configured as x4 or quad x1 lanes. One unit is
-- * x1 only.
-- */
-- pcie-controller {
-- compatible = "marvell,armada-xp-pcie";
-- status = "disabled";
-- device_type = "pci";
--
--#address-cells = <3>;
--#size-cells = <2>;
--
-- bus-range = <0x00 0xff>;
--
-- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
-- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
-- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
-- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
-- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
-- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
-- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
--
-- pcie@1,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-- reg = <0x0800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 58>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 5>;
-- status = "disabled";
-- };
--
-- pcie@2,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-- reg = <0x1000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 59>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <1>;
-- clocks = <&gateclk 6>;
-- status = "disabled";
-- };
--
-- pcie@3,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-- reg = <0x1800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 60>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <2>;
-- clocks = <&gateclk 7>;
-- status = "disabled";
-- };
--
-- pcie@4,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-- reg = <0x2000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 61>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <3>;
-- clocks = <&gateclk 8>;
-- status = "disabled";
-- };
--
-- pcie@5,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-- reg = <0x2800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 62>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 9>;
-- status = "disabled";
-- };
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
-@@ -45,6 +45,145 @@
- };
-
- soc {
-+ /*
-+ * MV78260 has 3 PCIe units Gen2.0: Two units can be
-+ * configured as x4 or quad x1 lanes. One unit is
-+ * x4/x1.
-+ */
-+ pcie-controller {
-+ compatible = "marvell,armada-xp-pcie";
-+ status = "disabled";
-+ device_type = "pci";
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bus-range = <0x00 0xff>;
-+
-+ ranges =
-+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
-+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
-+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
-+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
-+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
-+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
-+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
-+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
-+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
-+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
-+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
-+ 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-+ 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
-+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
-+
-+ pcie@1,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 58>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 5>;
-+ status = "disabled";
-+ };
-+
-+ pcie@2,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-+ reg = <0x1000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 59>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <1>;
-+ clocks = <&gateclk 6>;
-+ status = "disabled";
-+ };
-+
-+ pcie@3,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-+ reg = <0x1800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 60>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <2>;
-+ clocks = <&gateclk 7>;
-+ status = "disabled";
-+ };
-+
-+ pcie@4,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-+ reg = <0x2000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 61>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <3>;
-+ clocks = <&gateclk 8>;
-+ status = "disabled";
-+ };
-+
-+ pcie@9,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-+ reg = <0x4800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 99>;
-+ marvell,pcie-port = <2>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 26>;
-+ status = "disabled";
-+ };
-+
-+ pcie@10,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
-+ reg = <0x5000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-+ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 103>;
-+ marvell,pcie-port = <3>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 27>;
-+ status = "disabled";
-+ };
-+ };
-+
- internal-regs {
- pinctrl {
- compatible = "marvell,mv78260-pinctrl";
-@@ -98,177 +237,6 @@
- status = "disabled";
- };
-
-- /*
-- * MV78260 has 3 PCIe units Gen2.0: Two units can be
-- * configured as x4 or quad x1 lanes. One unit is
-- * x4 only.
-- */
-- pcie-controller {
-- compatible = "marvell,armada-xp-pcie";
-- status = "disabled";
-- device_type = "pci";
--
-- #address-cells = <3>;
-- #size-cells = <2>;
--
-- bus-range = <0x00 0xff>;
--
-- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
-- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
-- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
-- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
-- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
-- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
-- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */
-- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */
-- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */
-- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
-- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
--
-- pcie@1,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-- reg = <0x0800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 58>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 5>;
-- status = "disabled";
-- };
--
-- pcie@2,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
-- reg = <0x1000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 59>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <1>;
-- clocks = <&gateclk 6>;
-- status = "disabled";
-- };
--
-- pcie@3,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
-- reg = <0x1800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 60>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <2>;
-- clocks = <&gateclk 7>;
-- status = "disabled";
-- };
--
-- pcie@4,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
-- reg = <0x2000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 61>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <3>;
-- clocks = <&gateclk 8>;
-- status = "disabled";
-- };
--
-- pcie@5,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
-- reg = <0x2800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 62>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 9>;
-- status = "disabled";
-- };
--
-- pcie@6,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
-- reg = <0x3000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 63>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <1>;
-- clocks = <&gateclk 10>;
-- status = "disabled";
-- };
--
-- pcie@7,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
-- reg = <0x3800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 64>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <2>;
-- clocks = <&gateclk 11>;
-- status = "disabled";
-- };
--
-- pcie@8,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
-- reg = <0x4000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 65>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <3>;
-- clocks = <&gateclk 12>;
-- status = "disabled";
-- };
--
-- pcie@9,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
-- reg = <0x4800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 99>;
-- marvell,pcie-port = <2>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 26>;
-- status = "disabled";
-- };
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-+++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
-@@ -60,6 +60,227 @@
- };
-
- soc {
-+ /*
-+ * MV78460 has 4 PCIe units Gen2.0: Two units can be
-+ * configured as x4 or quad x1 lanes. Two units are
-+ * x4/x1.
-+ */
-+ pcie-controller {
-+ compatible = "marvell,armada-xp-pcie";
-+ status = "disabled";
-+ device_type = "pci";
-+
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+
-+ bus-range = <0x00 0xff>;
-+
-+ ranges =
-+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
-+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
-+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
-+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
-+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
-+ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
-+ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
-+ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
-+ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
-+ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
-+ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
-+ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
-+ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
-+ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
-+ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
-+ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
-+ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
-+ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
-+
-+ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
-+ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
-+ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
-+ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
-+ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
-+ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
-+ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
-+ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
-+
-+ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
-+ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
-+
-+ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
-+ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
-+
-+ pcie@1,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-+ reg = <0x0800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
-+ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 58>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 5>;
-+ status = "disabled";
-+ };
-+
-+ pcie@2,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-+ reg = <0x1000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
-+ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 59>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <1>;
-+ clocks = <&gateclk 6>;
-+ status = "disabled";
-+ };
-+
-+ pcie@3,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-+ reg = <0x1800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
-+ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 60>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <2>;
-+ clocks = <&gateclk 7>;
-+ status = "disabled";
-+ };
-+
-+ pcie@4,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-+ reg = <0x2000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
-+ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 61>;
-+ marvell,pcie-port = <0>;
-+ marvell,pcie-lane = <3>;
-+ clocks = <&gateclk 8>;
-+ status = "disabled";
-+ };
-+
-+ pcie@5,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-+ reg = <0x2800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
-+ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 62>;
-+ marvell,pcie-port = <1>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 9>;
-+ status = "disabled";
-+ };
-+
-+ pcie@6,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-+ reg = <0x3000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
-+ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 63>;
-+ marvell,pcie-port = <1>;
-+ marvell,pcie-lane = <1>;
-+ clocks = <&gateclk 10>;
-+ status = "disabled";
-+ };
-+
-+ pcie@7,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-+ reg = <0x3800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
-+ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 64>;
-+ marvell,pcie-port = <1>;
-+ marvell,pcie-lane = <2>;
-+ clocks = <&gateclk 11>;
-+ status = "disabled";
-+ };
-+
-+ pcie@8,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-+ reg = <0x4000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
-+ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 65>;
-+ marvell,pcie-port = <1>;
-+ marvell,pcie-lane = <3>;
-+ clocks = <&gateclk 12>;
-+ status = "disabled";
-+ };
-+
-+ pcie@9,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-+ reg = <0x4800 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
-+ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 99>;
-+ marvell,pcie-port = <2>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 26>;
-+ status = "disabled";
-+ };
-+
-+ pcie@10,0 {
-+ device_type = "pci";
-+ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-+ reg = <0x5000 0 0 0 0>;
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ #interrupt-cells = <1>;
-+ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
-+ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
-+ interrupt-map-mask = <0 0 0 0>;
-+ interrupt-map = <0 0 0 0 &mpic 103>;
-+ marvell,pcie-port = <3>;
-+ marvell,pcie-lane = <0>;
-+ clocks = <&gateclk 27>;
-+ status = "disabled";
-+ };
-+ };
-+
- internal-regs {
- pinctrl {
- compatible = "marvell,mv78460-pinctrl";
-@@ -112,194 +333,6 @@
- clocks = <&gateclk 1>;
- status = "disabled";
- };
--
-- /*
-- * MV78460 has 4 PCIe units Gen2.0: Two units can be
-- * configured as x4 or quad x1 lanes. Two units are
-- * x4/x1.
-- */
-- pcie-controller {
-- compatible = "marvell,armada-xp-pcie";
-- status = "disabled";
-- device_type = "pci";
--
-- #address-cells = <3>;
-- #size-cells = <2>;
--
-- bus-range = <0x00 0xff>;
--
-- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
-- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
-- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
-- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
-- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
-- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
-- 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
-- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */
-- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */
-- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */
-- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
-- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
--
-- pcie@1,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
-- reg = <0x0800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 58>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 5>;
-- status = "disabled";
-- };
--
-- pcie@2,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
-- reg = <0x1000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 59>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <1>;
-- clocks = <&gateclk 6>;
-- status = "disabled";
-- };
--
-- pcie@3,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
-- reg = <0x1800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 60>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <2>;
-- clocks = <&gateclk 7>;
-- status = "disabled";
-- };
--
-- pcie@4,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
-- reg = <0x2000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 61>;
-- marvell,pcie-port = <0>;
-- marvell,pcie-lane = <3>;
-- clocks = <&gateclk 8>;
-- status = "disabled";
-- };
--
-- pcie@5,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
-- reg = <0x2800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 62>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 9>;
-- status = "disabled";
-- };
--
-- pcie@6,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
-- reg = <0x3000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 63>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <1>;
-- clocks = <&gateclk 10>;
-- status = "disabled";
-- };
--
-- pcie@7,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
-- reg = <0x3800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 64>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <2>;
-- clocks = <&gateclk 11>;
-- status = "disabled";
-- };
--
-- pcie@8,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
-- reg = <0x4000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 65>;
-- marvell,pcie-port = <1>;
-- marvell,pcie-lane = <3>;
-- clocks = <&gateclk 12>;
-- status = "disabled";
-- };
-- pcie@9,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
-- reg = <0x4800 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 99>;
-- marvell,pcie-port = <2>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 26>;
-- status = "disabled";
-- };
--
-- pcie@10,0 {
-- device_type = "pci";
-- assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
-- reg = <0x5000 0 0 0 0>;
-- #address-cells = <3>;
-- #size-cells = <2>;
-- #interrupt-cells = <1>;
-- ranges;
-- interrupt-map-mask = <0 0 0 0>;
-- interrupt-map = <0 0 0 0 &mpic 103>;
-- marvell,pcie-port = <3>;
-- marvell,pcie-lane = <0>;
-- clocks = <&gateclk 27>;
-- status = "disabled";
-- };
-- };
- };
- };
- };
---- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-+++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
-@@ -59,6 +59,15 @@
- };
- };
-
-+ pcie-controller {
-+ status = "okay";
-+ /* Internal mini-PCIe connector */
-+ pcie@1,0 {
-+ /* Port 0, Lane 0 */
-+ status = "okay";
-+ };
-+ };
-+
- internal-regs {
- serial@12000 {
- clock-frequency = <250000000>;
-@@ -172,15 +181,6 @@
- usb@51000 {
- status = "okay";
- };
--
-- pcie-controller {
-- status = "okay";
-- /* Internal mini-PCIe connector */
-- pcie@1,0 {
-- /* Port 0, Lane 0 */
-- status = "okay";
-- };
-- };
- };
- };
- };
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 15:10:03 +0000