aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/files-4.4/arch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/files-4.4/arch')
-rw-r--r--target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-rango.dts455
-rw-r--r--target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-shelby.dts115
2 files changed, 0 insertions, 570 deletions
diff --git a/target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-rango.dts b/target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-rango.dts
deleted file mode 100644
index ac4ac1b1b1..0000000000
--- a/target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-rango.dts
+++ /dev/null
@@ -1,455 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT3200ACM (Rango)
- *
- * Copyright (C) 2016 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include "armada-385.dtsi"
-
-/ {
- model = "Linksys WRT3200ACM";
- compatible = "linksys,rango", "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory {
- device_type = "memory";
- reg = <0x00000000 0x20000000>; /* 512 MB */
- };
-
- soc {
- ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
- MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000
- MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000
- MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000
- MBUS_ID(0x0c, 0x04) 0 0xf1200000 0x100000>;
-
- internal-regs {
-
- spi@10600 {
- status = "disabled";
- };
-
- i2c@11000 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins>;
- status = "okay";
-
- tmp421@4c {
- compatible = "ti,tmp421";
- reg = <0x4c>;
- };
-
- pca9635@68 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "nxp,pca9635";
- reg = <0x68>;
-
- wan_amber@0 {
- label = "rango:amber:wan";
- reg = <0x0>;
- };
-
- wan_white@1 {
- label = "rango:white:wan";
- reg = <0x1>;
- };
-
- usb2@5 {
- label = "rango:white:usb2";
- reg = <0x5>;
- };
-
- usb3_1@6 {
- label = "rango:white:usb3_1";
- reg = <0x6>;
- };
-
- usb3_2@7 {
- label = "rango:white:usb3_2";
- reg = <0x7>;
- };
-
- wps_white@8 {
- label = "rango:white:wps";
- reg = <0x8>;
- };
-
- wps_amber@9 {
- label = "rango:amber:wps";
- reg = <0x9>;
- };
- };
- };
-
- /* J10: VCC, NC, RX, NC, TX, GND */
- serial@12000 {
- status = "okay";
- };
-
- ethernet@70000 {
- status = "okay";
- phy-mode = "rgmii-id";
- buffer-manager = <&bm>;
- bm,pool-long = <0>;
- bm,pool-short = <3>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- ethernet@34000 {
- status = "okay";
- phy-mode = "sgmii";
- buffer-manager = <&bm>;
- bm,pool-long = <2>;
- bm,pool-short = <3>;
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- mdio {
- status = "okay";
- };
-
- bm@c8000 {
- status = "okay";
- };
-
- sata@a8000 {
- status = "okay";
- };
-
- sdhci@d8000 {
- pinctrl-names = "default";
- pinctrl-0 = <&sdhci_pins>;
- no-1-8-v;
- broken-cd;
- wp-inverted;
- bus-width = <8>;
- status = "okay";
- };
-
- /* USB part of the eSATA/USB 2.0 port */
- usb@58000 {
- status = "okay";
- };
-
- usb3@f8000 {
- status = "okay";
- usb-phy = <&usb3_phy>;
- };
-
- flash@d0000 {
- status = "okay";
- num-cs = <1>;
- nand-ecc-strength = <4>;
- nand-ecc-step-size = <512>;
- marvell,nand-keep-config;
- marvell,nand-enable-arbiter;
- nand-on-flash-bbt;
-
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x200000>; /* 2MB */
- read-only;
- };
-
- partition@200000 {
- label = "u_env";
- reg = <0x200000 0x20000>; /* 128KB */
- };
-
- partition@220000 {
- label = "s_env";
- reg = <0x220000 0x40000>; /* 256KB */
- };
-
- partition@7e0000 {
- label = "devinfo";
- reg = <0x7e0000 0x40000>; /* 256KB */
- read-only;
- };
-
- partition@820000 {
- label = "sysdiag";
- reg = <0x820000 0x1e0000>; /* 1920KB */
- read-only;
- };
-
- /* kernel1 overlaps with rootfs1 by design */
- partition@a00000 {
- label = "kernel1";
- reg = <0xa00000 0x5000000>; /* 80MB */
- };
-
- partition@1000000 {
- label = "rootfs1";
- reg = <0x1000000 0x4a00000>; /* 74MB */
- };
-
- /* kernel2 overlaps with rootfs2 by design */
- partition@5a00000 {
- label = "kernel2";
- reg = <0x5a00000 0x5000000>; /* 80MB */
- };
-
- partition@6000000 {
- label = "rootfs2";
- reg = <0x6000000 0x4a00000>; /* 74MB */
- };
-
- /*
- * 86MB, last MB is for the BBT, not writable
- */
- partition@aa00000 {
- label = "syscfg";
- reg = <0xaa00000 0x5600000>;
- };
-
- /*
- * Unused area between "s_env" and "devinfo".
- * Moved here because otherwise the renumbered
- * partitions would break the bootloader
- * supplied bootargs
- */
- partition@180000 {
- label = "unused_area";
- reg = <0x260000 0x5c0000>; /* 5.75MB */
- };
- };
- };
-
- bm-bppi {
- status = "okay";
- };
-
- pcie-controller {
- status = "okay";
-
- pcie@1,0 {
- /* Marvell 88W8964, 5GHz-only */
- status = "okay";
-
- mwlwifi {
- marvell,2ghz = <0>;
- marvell,chainmask = <4 4>;
- };
-
- };
-
- pcie@2,0 {
- /* Marvell 88W8964, 2GHz-only */
- status = "okay";
-
- mwlwifi {
- marvell,5ghz = <0>;
- marvell,chainmask = <4 4>;
- };
-
- };
- };
- };
-
- usb3_phy: usb3_phy {
- compatible = "usb-nop-xceiv";
- vcc-supply = <&reg_xhci0_vbus>;
- };
-
- reg_xhci0_vbus: xhci0-vbus {
- compatible = "regulator-fixed";
- pinctrl-names = "default";
- pinctrl-0 = <&xhci0_vbus_pins>;
- regulator-name = "xhci0-vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
- };
-
- gpio_keys {
- compatible = "gpio-keys";
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-0 = <&reset_key_pin &wps_key_pin>;
- pinctrl-names = "default";
-
- button@1 {
- label = "WPS";
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
- };
-
- button@2 {
- label = "Factory Reset Button";
- linux,code = <KEY_RESTART>;
- gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
- pinctrl-0 = <&power_led_pin &sata_led_pin &wlan_2g_led_pin &wlan_5g_led_pin>;
- pinctrl-names = "default";
-
- sata {
- label = "rango:white:sata";
- gpios = <&gpio0 21 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "disk-activity";
- };
-
- wlan_2g {
- label = "rango:white:wlan_2g";
- gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- };
-
- wlan_5g {
- label = "rango:white:wlan_5g";
- gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- };
-
- power {
- label = "rango:white:power";
- gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
-
- dsa@0 {
- compatible = "marvell,dsa";
- #address-cells = <2>;
- #size-cells = <0>;
-
- dsa,ethernet = <&eth2>;
- dsa,mii-bus = <&mdio>;
-
- switch@0 {
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */
-
- port@0 {
- reg = <0>;
- label = "lan4";
- };
-
- port@1 {
- reg = <1>;
- label = "lan3";
- };
-
- port@2 {
- reg = <2>;
- label = "lan2";
- };
-
- port@3 {
- reg = <3>;
- label = "lan1";
- };
-
- port@4 {
- reg = <4>;
- label = "wan";
- };
-
- port@5 {
- reg = <5>;
- label = "cpu";
- };
- };
- };
-
- mvsw61xx {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "marvell,88e6352";
- status = "okay";
- reg = <0x10>;
-
- mii-bus = <&mdio>;
- cpu-port-0 = <5>;
- cpu-port-1 = <6>;
- };
-
-};
-
-&pinctrl {
- sata_led_pin: sata-led-pin {
- marvell,pins = "mpp21";
- marvell,function = "gpio";
- };
-
- wps_key_pin: wps-key-pin {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- reset_key_pin: reset-key-pin {
- marvell,pins = "mpp29";
- marvell,function = "gpio";
- };
-
- wlan_2g_led_pin: wlan-2g-led-pin {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
-
- wlan_5g_led_pin: wlan-5g-led-pin {
- marvell,pins = "mpp46";
- marvell,function = "gpio";
- };
-
- xhci0_vbus_pins: xhci0-vbus-pins {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- power_led_pin: power-led-pin {
- marvell,pins = "mpp56";
- marvell,function = "gpio";
- };
-};
diff --git a/target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-shelby.dts
deleted file mode 100644
index f8dd193ef0..0000000000
--- a/target/linux/mvebu/files-4.4/arch/arm/boot/dts/armada-385-linksys-shelby.dts
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- * Device Tree file for the Linksys WRT1900ACS (Shelby)
- *
- * Copyright (C) 2015 Imre Kaloz <kaloz@openwrt.org>
- *
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without
- * any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "armada-385-linksys.dtsi"
-
-/ {
- model = "Linksys WRT1900ACS";
- compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385",
- "marvell,armada380";
-
- soc {
- internal-regs{
- i2c@11000 {
-
- pca9635@68 {
- #address-cells = <1>;
- #size-cells = <0>;
-
- wan_amber@0 {
- label = "shelby:amber:wan";
- reg = <0x0>;
- };
-
- wan_white@1 {
- label = "shelby:white:wan";
- reg = <0x1>;
- };
-
- wlan_2g@2 {
- label = "shelby:white:wlan_2g";
- reg = <0x2>;
- };
-
- wlan_5g@3 {
- label = "shelby:white:wlan_5g";
- reg = <0x3>;
- };
-
- usb2@5 {
- label = "shelby:white:usb2";
- reg = <0x5>;
- };
-
- usb3_1@6 {
- label = "shelby:white:usb3_1";
- reg = <0x6>;
- };
-
- usb3_2@7 {
- label = "shelby:white:usb3_2";
- reg = <0x7>;
- };
-
- wps_white@8 {
- label = "shelby:white:wps";
- reg = <0x8>;
- };
-
- wps_amber@9 {
- label = "shelby:amber:wps";
- reg = <0x9>;
- };
- };
- };
- };
- };
-
- gpio-leds {
- power {
- label = "shelby:white:power";
- };
-
- sata {
- label = "shelby:white:sata";
- linux,default-trigger = "disk-activity";
- };
- };
-};
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 20:17:39 +0000