diff options
Diffstat (limited to 'target/linux/mvebu/files-4.19')
4 files changed, 315 insertions, 0 deletions
diff --git a/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts new file mode 100644 index 0000000000..c152c14c6b --- /dev/null +++ b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-385-linksys-venom.dts @@ -0,0 +1,213 @@ +/* + * Device Tree file for the Linksys WRT32X (Venom) + * + * Copyright (C) 2017 Imre Kaloz <kaloz@openwrt.org> + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT32X"; + compatible = "linksys,venom", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = "serial0:115200n8"; + append-rootblock = "root=/dev/mtdblock"; + }; +}; + +&expander0 { + wan_amber@0 { + label = "venom:amber:wan"; + reg = <0x0>; + }; + + wan_blue@1 { + label = "venom:blue:wan"; + reg = <0x1>; + }; + + usb2@5 { + label = "venom:blue:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "venom:blue:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "venom:blue:usb3_2"; + reg = <0x7>; + }; + + wps_blue@8 { + label = "venom:blue:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "venom:amber:wps"; + reg = <0x9>; + }; +}; + +&gpio_leds { + power { + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + label = "venom:blue:power"; + }; + + sata { + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; + label = "venom:blue:sata"; + }; + + wlan_2g { + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + label = "venom:blue:wlan_2g"; + }; + + wlan_5g { + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + label = "venom:blue:wlan_5g"; + }; +}; + +&gpio_leds_pins { + marvell,pins = "mpp21", "mpp45", "mpp46", "mpp56"; +}; + +&nand { + /* Spansion S34ML02G2 256MiB, OEM Layout */ + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KB */ + }; + + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@900000 { + label = "kernel1"; + reg = <0x900000 0x7b00000>; /* 123MB */ + }; + + partition@c00000 { + label = "rootfs1"; + reg = <0xc00000 0x7800000>; /* 120MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@8400000 { + label = "kernel2"; + reg = <0x8400000 0x7b00000>; /* 123MB */ + }; + + partition@8700000 { + label = "rootfs2"; + reg = <0x8700000 0x7800000>; /* 120MB */ + }; + + /* last MB is for the BBT, not writable */ + partition@ff00000 { + label = "BBT"; + reg = <0xff00000 0x100000>; + }; + }; +}; + + +&pcie1 { + mwlwifi { + marvell,chainmask = <4 4>; + }; +}; + +&pcie2 { + mwlwifi { + marvell,chainmask = <4 4>; + }; +}; + +&sdhci { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + no-1-8-v; + non-removable; + wp-inverted; + bus-width = <8>; + status = "okay"; +}; + +&usb3_1_vbus { + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; +}; + +&usb3_1_vbus_pins { + marvell,pins = "mpp44"; +}; diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts new file mode 100644 index 0000000000..ef90a1bd38 --- /dev/null +++ b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-emmc.dts @@ -0,0 +1,28 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board (eMMC)"; + compatible = "globalscale,espressobin-emmc", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&sdhci0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts new file mode 100644 index 0000000000..2b565ca8d8 --- /dev/null +++ b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7-emmc.dts @@ -0,0 +1,43 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 with eMMC + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7 (eMMC)"; + compatible = "globalscale,espressobin-v7-emmc", "globalscale,espressobin-v7", + "globalscale,espressobin", "marvell,armada3720", + "marvell,armada3710"; +}; + +&ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; +}; + +&sdhci0 { + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + mmccard: mmccard@0 { + compatible = "mmc-card"; + reg = <0>; + }; +}; diff --git a/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts new file mode 100644 index 0000000000..8a408c3c48 --- /dev/null +++ b/target/linux/mvebu/files-4.19/arch/arm64/boot/dts/marvell/armada-3720-espressobin-v7.dts @@ -0,0 +1,31 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Globalscale Marvell ESPRESSOBin Board V7 + * Copyright (C) 2018 Marvell + * + * Romain Perier <romain.perier@free-electrons.com> + * Konstantin Porotchkin <kostap@marvell.com> + * + */ + +#include "armada-3720-espressobin.dts" + +/ { + model = "Globalscale Marvell ESPRESSOBin Board V7"; + compatible = "globalscale,espressobin-v7", "globalscale,espressobin", + "marvell,armada3720", "marvell,armada3710"; +}; + +&ports { + port@1 { + reg = <1>; + label = "lan1"; + phy-handle = <&switch0phy0>; + }; + + port@3 { + reg = <3>; + label = "wan"; + phy-handle = <&switch0phy2>; + }; +}; |