diff options
Diffstat (limited to 'target/linux/mvebu/files-4.19/arch/arm')
-rw-r--r-- | target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts | 360 |
1 files changed, 360 insertions, 0 deletions
diff --git a/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts new file mode 100644 index 0000000000..6b8a964ab3 --- /dev/null +++ b/target/linux/mvebu/files-4.19/arch/arm/boot/dts/armada-370-buffalo-ls421de.dts @@ -0,0 +1,360 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree file for Buffalo LinkStation LS421DE + * + * Copyright (C) 2020 Daniel González Cabanelas <dgcbueu@gmail.com> + */ + +/dts-v1/; + +#include "armada-370.dtsi" +#include "mvebu-linkstation-fan.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Buffalo LinkStation LS421DE"; + compatible = "buffalo,ls421de", "marvell,armada370", "marvell,armada-370-xp"; + + aliases { + led-boot = &led_boot; + led-failsafe = &led_failsafe; + led-running = &led_power; + led-upgrade = &led_upgrade; + }; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk noinitrd rootfstype=squashfs"; + stdout-path = "serial0:115200n8"; + append-rootblock = "nullparameter="; /* override the bootloader args */ + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x01) 0 0xf1100000 0x10000>; + }; + + gpio_fan { + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH + &gpio0 14 GPIO_ACTIVE_HIGH>; + alarm-gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_hdd_present &pmx_buttons>; + pinctrl-names = "default"; + + hdd1-present { + label = "HDD1 Present"; + linux,code = <KEY_PROG1>; + gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; + }; + + hdd2-present { + label = "HDD2 Present"; + linux,code = <KEY_PROG2>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + + }; + + power { + label = "Power Switch"; + linux,code = <KEY_POWER>; + linux,input-type = <EV_SW>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + function { + label = "Function Button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pmx_leds1 &pmx_leds2>; + + system_red { + label = "ls421de:red:system"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + led_power: power_white { + label = "ls421de:white:power"; + gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_failsafe: power_red { + label = "ls421de:red:power"; + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + }; + + led_upgrade: power_orange { + label = "ls421de:orange:power"; + gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + }; + + led_boot: system_white { + label = "ls421de:white:system"; + gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>; + }; + + hdd1_red { + label = "ls421de:red:hdd1"; + gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + + hdd2_red { + label = "ls421de:red:hdd2"; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "disk-activity"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_power_usb &pmx_power_hdd1 &pmx_power_hdd2>; + + pinctrl-names = "default"; + + usb_v5_regulator: usb-v5-regulator { + compatible = "regulator-fixed"; + regulator-name = "USB"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + }; + + ata1_regulator: ata1-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "HDD1"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <2000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 8 GPIO_ACTIVE_HIGH>; + }; + + ata2_regulator: ata2-regulator { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "HDD2"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + startup-delay-us = <4000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 9 GPIO_ACTIVE_HIGH>; + }; + }; + + /* FIXME: this driver needs to be aware of the LED2 eth phy use, + which must be set to off state before shutting down the machine */ + restart_poweroff { + compatible = "restart-poweroff"; + }; +}; + +ð1 { + pinctrl-0 = <&ge1_rgmii_pins>; + pinctrl-names = "default"; + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; +}; + +&i2c0 { + clock-frequency = <100000>; + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; +}; + +&mdio { + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + + phy0: ethernet-phy@0 { /* Marvell 88E1518 */ + reg = <0>; + /* LED2 is used to inform uBoot if the power-switch was slided + to the "off" position, and then power off the machine. + Page 0x3, Register 0x10, bit 8: + 0x800: LED2 off, power off the machine + 0x900: LED2 on, boot the machine */ + marvell,reg-init = <0x3 0x10 0x1 0x1991>, /* LED Function */ + <0x3 0x11 0x1 0x4401>, /* LED polarity */ + <0x3 0x12 0x1 0x4905>; /* LED Timer */ + }; +}; + +&pciec { + status = "okay"; + /* Connected to uPD720202 USB 3.0 Host */ + pcie@1,0 { + status = "okay"; + }; +}; + +&pmsu { + pinctrl-0 = <&pmx_power_cpu>; + pinctrl-names = "default"; +}; + +&rtc { + status = "disabled"; +}; + +&sata { + nr-ports = <2>; + status = "okay"; +}; + +&sdio { + pinctrl-0 = <&sdio_pins2>; + pinctrl-names = "default"; + status = "okay"; + /* No CD or WP GPIOs */ + broken-cd; +}; + +&uart0 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&nand_controller { + status = "okay"; + + nand@0 { + reg = <0>; + label = "pxa3xx_nand-0"; + nand-rb = <0>; + marvell,nand-keep-config; + nand-on-flash-bbt; + nand-ecc-strength = <4>; + nand-ecc-step-size = <512>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x02000000>; /* 32 MiB */ + }; + + partition@2000000 { + label = "ubi"; + reg = <0x02000000 0x1e000000>; /* 480 MiB */ + }; + }; + }; +}; + +&spi0 { + status = "okay"; + pinctrl-0 = <&spi0_pins2>; + pinctrl-names = "default"; + + spi-flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l8005", "jedec,spi-nor"; + reg = <0>; /* Chip select 0 */ + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x00000 0xf0000>; /* 960 KiB*/ + label = "u-boot"; + read-only; + }; + partition@f0000 { + reg = <0xf0000 0x10000>; /* 64 KiB */ + label = "u-boot-env"; + }; + }; + }; +}; + +&pinctrl { + pmx_power_cpu: pmx-power-cpu { + marvell,pins = "mpp4"; + marvell,function = "vdd"; + }; + pmx_power_usb: pmx-power-usb { + marvell,pins = "mpp5"; + marvell,function = "gpo"; + }; + pmx_power_hdd1: pmx-power-hdd1 { + marvell,pins = "mpp8"; + marvell,function = "gpio"; + }; + pmx_power_hdd2: pmx-power-hdd2 { + marvell,pins = "mpp9"; + marvell,function = "gpo"; + }; + pmx_fan_lock: pmx-fan-lock { + marvell,pins = "mpp10"; + marvell,function = "gpio"; + }; + pmx_hdd_present: pmx-hdd-present { + marvell,pins = "mpp11", "mpp12"; + marvell,function = "gpio"; + }; + pmx_fan_high: pmx-fan-high { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + pmx_fan_low: pmx-fan-low { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + pmx_buttons: pmx-buttons { + marvell,pins = "mpp15", "mpp16"; + marvell,function = "gpio"; + }; + pmx_leds1: pmx-leds { + marvell,pins = "mpp7", "mpp54", "mpp59", "mpp61"; + marvell,function = "gpo"; + }; + pmx_leds2: pmx-leds { + marvell,pins = "mpp55", "mpp57", "mpp62"; + marvell,function = "gpio"; + }; +}; |