diff options
Diffstat (limited to 'target/linux/mvebu/base-files')
8 files changed, 34 insertions, 14 deletions
diff --git a/target/linux/mvebu/base-files/etc/board.d/01_leds b/target/linux/mvebu/base-files/etc/board.d/01_leds index 71dd3476e6..8310160ccf 100755 --- a/target/linux/mvebu/base-files/etc/board.d/01_leds +++ b/target/linux/mvebu/base-files/etc/board.d/01_leds @@ -1,6 +1,7 @@ #!/bin/sh # -# Copyright (C) 2014-2015 OpenWrt.org +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org # . /lib/functions/uci-defaults.sh @@ -21,6 +22,11 @@ armada-385-linksys-cobra) ucidef_set_led_usbdev "usb2" "USB2" "pca963x:cobra:white:usb2" "1-1" ucidef_set_led_usbdev "usb3" "USB3" "pca963x:cobra:white:usb3_1" "2-1" ;; +armada-385-linksys-rango) + ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth0" + ucidef_set_led_usbdev "usb2" "USB2" "pca963x:rango:white:usb2" "1-1" + ucidef_set_led_usbdev "usb3" "USB3" "pca963x:rango:white:usb3_1" "2-1" + ;; armada-385-linksys-shelby) ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth0" ucidef_set_led_usbdev "usb2" "USB2" "pca963x:shelby:white:usb2" "1-1" diff --git a/target/linux/mvebu/base-files/etc/board.d/02_network b/target/linux/mvebu/base-files/etc/board.d/02_network index 21c666025c..614a0e2887 100755 --- a/target/linux/mvebu/base-files/etc/board.d/02_network +++ b/target/linux/mvebu/base-files/etc/board.d/02_network @@ -1,6 +1,7 @@ #!/bin/sh # -# Copyright (C) 2014-2015 OpenWrt.org +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org # . /lib/functions/uci-defaults.sh @@ -13,6 +14,7 @@ board=$(mvebu_board_name) case "$board" in armada-385-linksys-caiman|\ armada-385-linksys-cobra|\ +armada-385-linksys-rango|\ armada-385-linksys-shelby) ucidef_set_interfaces_lan_wan "eth1" "eth0" ucidef_add_switch "switch0" \ diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh index a361fa776d..622c7d9604 100644 --- a/target/linux/mvebu/base-files/etc/diag.sh +++ b/target/linux/mvebu/base-files/etc/diag.sh @@ -13,6 +13,9 @@ get_status_led() { armada-385-linksys-cobra) status_led="cobra:white:power" ;; + armada-385-linksys-rango) + status_led="rango:white:power" + ;; armada-385-linksys-shelby) status_led="shelby:white:power" ;; diff --git a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery index d9cae7b2cf..8eeb5f99b9 100755 --- a/target/linux/mvebu/base-files/etc/init.d/linksys_recovery +++ b/target/linux/mvebu/base-files/etc/init.d/linksys_recovery @@ -1,5 +1,6 @@ #!/bin/sh /etc/rc.common -# Copyright (C) 2015 OpenWrt.org +# Copyright (C) 2015-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org START=97 boot() { @@ -7,7 +8,7 @@ boot() { . /lib/mvebu.sh case $(mvebu_board_name) in - armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba) + armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba) # make sure auto_recovery in uboot is always on AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`" if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then diff --git a/target/linux/mvebu/base-files/lib/mvebu.sh b/target/linux/mvebu/base-files/lib/mvebu.sh index 836717d7f6..9a4c53ed40 100755 --- a/target/linux/mvebu/base-files/lib/mvebu.sh +++ b/target/linux/mvebu/base-files/lib/mvebu.sh @@ -1,6 +1,7 @@ #!/bin/sh # # Copyright (C) 2013-2015 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org # MVEBU_BOARD_NAME= @@ -43,6 +44,9 @@ mvebu_board_detect() { *"Linksys WRT1900ACS") name="armada-385-linksys-shelby" ;; + *"Linksys WRT3200ACM") + name="armada-385-linksys-rango" + ;; *"Marvell Armada 385 Access Point Development Board") name="armada-385-db-ap" ;; diff --git a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac index 876c08b771..3e870e8b84 100644 --- a/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac @@ -1,5 +1,6 @@ # # Copyright (C) 2014-2015 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org # preinit_set_mac_address() { @@ -14,7 +15,7 @@ preinit_set_mac_address() { ifconfig eth0 hw ether $mac 2>/dev/null ifconfig eth1 hw ether $mac 2>/dev/null ;; - armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby) + armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby) mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) mac_wan=$(macaddr_setbit_la "$mac") ifconfig eth1 hw ether $mac 2>/dev/null diff --git a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg index a54226f00c..3edd82ebcd 100644 --- a/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg +++ b/target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg @@ -1,5 +1,6 @@ # -# Copyright (C) 2014 OpenWrt.org +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org # preinit_mount_syscfg() { @@ -8,15 +9,16 @@ preinit_mount_syscfg() { . /lib/mvebu.sh case $(mvebu_board_name) in - armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba) + armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba) needs_recovery=0 - ubiattach -m 8 || needs_recovery=1 + syscfg_part=$(grep syscfg /proc/mtd |cut -c4) + ubiattach -m $syscfg_part || needs_recovery=1 if [ $needs_recovery -eq 1 ] then echo "ubifs syscfg partition is damaged, reformatting" - ubidetach -m 8 - ubiformat -y -O 2048 -q /dev/mtd8 - ubiattach -m 8 + ubidetach -m $syscfg_part + ubiformat -y -O 2048 -q /dev/mtd$syscfg_part + ubiattach -m $syscfg_part ubimkvol /dev/ubi1 -n 0 -N syscfg -t dynamic --maxavsize fi mkdir /tmp/syscfg diff --git a/target/linux/mvebu/base-files/lib/upgrade/platform.sh b/target/linux/mvebu/base-files/lib/upgrade/platform.sh index 5652e98a4e..a8ad602cc7 100755 --- a/target/linux/mvebu/base-files/lib/upgrade/platform.sh +++ b/target/linux/mvebu/base-files/lib/upgrade/platform.sh @@ -1,5 +1,6 @@ # -# Copyright (C) 2014 OpenWrt.org +# Copyright (C) 2014-2016 OpenWrt.org +# Copyright (C) 2016 LEDE-Project.org # . /lib/mvebu.sh @@ -13,7 +14,7 @@ platform_check_image() { [ "$#" -gt 1 ] && return 1 case "$board" in - armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba) + armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba) [ "$magic_long" != "27051956" -a "$magic_long" != "73797375" ] && { echo "Invalid image type." return 1 @@ -34,7 +35,7 @@ platform_do_upgrade() { local board=$(mvebu_board_name) case "$board" in - armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-xp-linksys-mamba) + armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-xp-linksys-mamba) platform_do_upgrade_linksys "$ARGV" ;; armada-388-clearfog) |