diff options
Diffstat (limited to 'target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch')
-rw-r--r-- | target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch | 616 |
1 files changed, 0 insertions, 616 deletions
diff --git a/target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch b/target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch deleted file mode 100644 index 84071761ae..0000000000 --- a/target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch +++ /dev/null @@ -1,616 +0,0 @@ -From 406d86e5990ac171f18ef6e2973672d8fbfe1556 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos <juhosg@openwrt.org> -Date: Wed, 20 Feb 2013 08:40:33 +0100 -Subject: [PATCH] powerpc: 85xx: add support for the TP-Link TL-WDR4900 v1 - board - -This patch adds support for the TP-Link TL-WDR4900 v1 -concurrent dual-band wireless router. The devices uses -the Freescale P1014 SoC. - -Signed-off-by: Gabor Juhos <juhosg@openwrt.org> ---- - arch/powerpc/boot/Makefile | 3 + - arch/powerpc/boot/cuboot-tl-wdr4900-v1.c | 164 ++++++++++++++++++++++++++ - arch/powerpc/boot/dts/tl-wdr4900-v1.dts | 166 +++++++++++++++++++++++++++ - arch/powerpc/boot/wrapper | 4 + - arch/powerpc/platforms/85xx/Kconfig | 11 ++ - arch/powerpc/platforms/85xx/Makefile | 1 + - arch/powerpc/platforms/85xx/tl_wdr4900_v1.c | 145 +++++++++++++++++++++++ - 7 files changed, 494 insertions(+) - create mode 100644 arch/powerpc/boot/cuboot-tl-wdr4900-v1.c - create mode 100644 arch/powerpc/boot/dts/tl-wdr4900-v1.dts - create mode 100644 arch/powerpc/platforms/85xx/tl_wdr4900_v1.c - ---- a/arch/powerpc/boot/Makefile -+++ b/arch/powerpc/boot/Makefile -@@ -98,6 +98,8 @@ src-plat-$(CONFIG_EMBEDDED6xx) += cuboot - src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c - src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c - src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c -+src-plat-$(CONFIG_TL_WDR4900_V1) += cuboot-tl-wdr4900-v1.c -+ - - src-wlib := $(sort $(src-wlib-y)) - src-plat := $(sort $(src-plat-y)) -@@ -278,6 +280,7 @@ image-$(CONFIG_TQM8555) += cuImage.tqm - image-$(CONFIG_TQM8560) += cuImage.tqm8560 - image-$(CONFIG_SBC8548) += cuImage.sbc8548 - image-$(CONFIG_KSI8560) += cuImage.ksi8560 -+image-$(CONFIG_TL_WDR4900_V1) += cuImage.tl-wdr4900-v1 - - # Board ports in arch/powerpc/platform/embedded6xx/Kconfig - image-$(CONFIG_STORCENTER) += cuImage.storcenter ---- /dev/null -+++ b/arch/powerpc/boot/cuboot-tl-wdr4900-v1.c -@@ -0,0 +1,164 @@ -+/* -+ * U-Boot compatibility wrapper for the TP-Link TL-WDR4900 v1 board -+ * -+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * Based on: -+ * cuboot-85xx.c -+ * Author: Scott Wood <scottwood@freescale.com> -+ * Copyright (c) 2007 Freescale Semiconductor, Inc. -+ * -+ * simpleboot.c -+ * Authors: Scott Wood <scottwood@freescale.com> -+ * Grant Likely <grant.likely@secretlab.ca> -+ * Copyright (c) 2007 Freescale Semiconductor, Inc. -+ * Copyright (c) 2008 Secret Lab Technologies Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ */ -+ -+#include "ops.h" -+#include "types.h" -+#include "io.h" -+#include "stdio.h" -+#include <libfdt.h> -+ -+BSS_STACK(4*1024); -+ -+static unsigned long bus_freq; -+static unsigned long int_freq; -+static u64 mem_size; -+static unsigned char enetaddr[6]; -+ -+static void process_boot_dtb(void *boot_dtb) -+{ -+ const u32 *na, *ns, *reg, *val32; -+ const char *path; -+ u64 memsize64; -+ int node, size, i; -+ -+ /* Make sure FDT blob is sane */ -+ if (fdt_check_header(boot_dtb) != 0) -+ fatal("Invalid device tree blob\n"); -+ -+ /* Find the #address-cells and #size-cells properties */ -+ node = fdt_path_offset(boot_dtb, "/"); -+ if (node < 0) -+ fatal("Cannot find root node\n"); -+ na = fdt_getprop(boot_dtb, node, "#address-cells", &size); -+ if (!na || (size != 4)) -+ fatal("Cannot find #address-cells property"); -+ -+ ns = fdt_getprop(boot_dtb, node, "#size-cells", &size); -+ if (!ns || (size != 4)) -+ fatal("Cannot find #size-cells property"); -+ -+ /* Find the memory range */ -+ node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type", -+ "memory", sizeof("memory")); -+ if (node < 0) -+ fatal("Cannot find memory node\n"); -+ reg = fdt_getprop(boot_dtb, node, "reg", &size); -+ if (size < (*na+*ns) * sizeof(u32)) -+ fatal("cannot get memory range\n"); -+ -+ /* Only interested in memory based at 0 */ -+ for (i = 0; i < *na; i++) -+ if (*reg++ != 0) -+ fatal("Memory range is not based at address 0\n"); -+ -+ /* get the memsize and trucate it to under 4G on 32 bit machines */ -+ memsize64 = 0; -+ for (i = 0; i < *ns; i++) -+ memsize64 = (memsize64 << 32) | *reg++; -+ if (sizeof(void *) == 4 && memsize64 >= 0x100000000ULL) -+ memsize64 = 0xffffffff; -+ -+ mem_size = memsize64; -+ -+ /* get clock frequencies */ -+ node = fdt_node_offset_by_prop_value(boot_dtb, -1, "device_type", -+ "cpu", sizeof("cpu")); -+ if (!node) -+ fatal("Cannot find cpu node\n"); -+ -+ val32 = fdt_getprop(boot_dtb, node, "clock-frequency", &size); -+ if (!val32 || (size != 4)) -+ fatal("Cannot get clock frequency"); -+ -+ int_freq = *val32; -+ -+ val32 = fdt_getprop(boot_dtb, node, "bus-frequency", &size); -+ if (!val32 || (size != 4)) -+ fatal("Cannot get bus frequency"); -+ -+ bus_freq = *val32; -+ -+ path = fdt_get_alias(boot_dtb, "ethernet0"); -+ if (path) { -+ const void *p; -+ -+ node = fdt_path_offset(boot_dtb, path); -+ if (node < 0) -+ fatal("Cannot find ethernet0 node"); -+ -+ p = fdt_getprop(boot_dtb, node, "mac-address", &size); -+ if (!p || (size < 6)) { -+ printf("no mac-address property, finding local\n\r"); -+ p = fdt_getprop(boot_dtb, node, "local-mac-address", &size); -+ } -+ -+ if (!p || (size < 6)) -+ fatal("cannot get MAC addres"); -+ -+ memcpy(enetaddr, p, sizeof(enetaddr)); -+ } -+} -+ -+static void platform_fixups(void) -+{ -+ void *soc; -+ -+ dt_fixup_memory(0, mem_size); -+ -+ dt_fixup_mac_address_by_alias("ethernet0", enetaddr); -+ dt_fixup_cpu_clocks(int_freq, bus_freq / 8, bus_freq); -+ -+ /* Unfortunately, the specific model number is encoded in the -+ * soc node name in existing dts files -- once that is fixed, -+ * this can do a simple path lookup. -+ */ -+ soc = find_node_by_devtype(NULL, "soc"); -+ if (soc) { -+ void *serial = NULL; -+ -+ setprop(soc, "bus-frequency", &bus_freq, sizeof(bus_freq)); -+ -+ while ((serial = find_node_by_devtype(serial, "serial"))) { -+ if (get_parent(serial) != soc) -+ continue; -+ -+ setprop(serial, "clock-frequency", &bus_freq, -+ sizeof(bus_freq)); -+ } -+ } -+} -+ -+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, -+ unsigned long r6, unsigned long r7) -+{ -+ mem_size = 64 * 1024 * 1024; -+ -+ simple_alloc_init(_end, mem_size - (u32)_end - 1024*1024, 32, 64); -+ -+ fdt_init(_dtb_start); -+ serial_console_init(); -+ -+ printf("\n\r-- TL-WDR4900 v1 boot wrapper --\n\r"); -+ -+ process_boot_dtb((void *) r3); -+ -+ platform_ops.fixups = platform_fixups; -+} ---- /dev/null -+++ b/arch/powerpc/boot/dts/tl-wdr4900-v1.dts -@@ -0,0 +1,212 @@ -+/* -+ * TP-Link TL-WDR4900 v1 Device Tree Source -+ * -+ * Copyright 2013 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+/include/ "fsl/p1010si-pre.dtsi" -+ -+/ { -+ model = "TP-Link TL-WDR4900 v1"; -+ compatible = "tp-link,TL-WDR4900v1"; -+ -+ chosen { -+ bootargs = "console=ttyS0,115200"; -+/* -+ linux,stdout-path = "/soc@ffe00000/serial@4500"; -+*/ -+ }; -+ -+ aliases { -+ spi0 = &spi0; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ }; -+ -+ soc: soc@ffe00000 { -+ ranges = <0x0 0x0 0xffe00000 0x100000>; -+ -+ spi0: spi@7000 { -+ flash@0 { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ compatible = "spansion,s25fl129p1"; -+ reg = <0>; -+ spi-max-frequency = <25000000>; -+ -+ u-boot@0 { -+ reg = <0x0 0x0050000>; -+ label = "u-boot"; -+ read-only; -+ }; -+ -+ dtb@50000 { -+ reg = <0x00050000 0x00010000>; -+ label = "dtb"; -+ read-only; -+ }; -+ -+ kernel@60000 { -+ reg = <0x00060000 0x002a0000>; -+ label = "kernel"; -+ }; -+ -+ rootfs@300000 { -+ reg = <0x00300000 0x00ce0000>; -+ label = "rootfs"; -+ }; -+ -+ config@fe0000 { -+ reg = <0x00fe0000 0x00010000>; -+ label = "config"; -+ read-only; -+ }; -+ -+ caldata@ff0000 { -+ reg = <0x00ff0000 0x00010000>; -+ label = "caldata"; -+ read-only; -+ }; -+ -+ firmware@60000 { -+ reg = <0x00060000 0x00f80000>; -+ label = "firmware"; -+ }; -+ }; -+ }; -+ -+ gpio0: gpio-controller@f000 { -+ }; -+ -+ usb@22000 { -+ phy_type = "utmi"; -+ dr_mode = "host"; -+ }; -+ -+ mdio@24000 { -+ phy0: ethernet-phy@0 { -+ reg = <0x0>; -+ qca,ar8327-initvals = < -+ 0x00004 0x07600000 /* PAD0_MODE */ -+ 0x00008 0x00000000 /* PAD5_MODE */ -+ 0x0000c 0x01000000 /* PAD6_MODE */ -+ 0x00010 0x40000000 /* POWER_ON_STRIP */ -+ 0x00050 0xcf35cf35 /* LED_CTRL0 */ -+ 0x00054 0xcf35cf35 /* LED_CTRL1 */ -+ 0x00058 0xcf35cf35 /* LED_CTRL2 */ -+ 0x0005c 0x03ffff00 /* LED_CTRL3 */ -+ 0x0007c 0x0000007e /* PORT0_STATUS */ -+ >; -+ }; -+ }; -+ -+ mdio@25000 { -+ status = "disabled"; -+ }; -+ -+ mdio@26000 { -+ status = "disabled"; -+ }; -+ -+ enet0: ethernet@b0000 { -+ phy-handle = <&phy0>; -+ phy-connection-type = "rgmii-id"; -+ }; -+ -+ enet1: ethernet@b1000 { -+ status = "disabled"; -+ }; -+ -+ enet2: ethernet@b2000 { -+ status = "disabled"; -+ }; -+ -+ sdhc@2e000 { -+ status = "disabled"; -+ }; -+ -+ serial1: serial@4600 { -+ status = "disabled"; -+ }; -+ -+ can0: can@1c000 { -+ status = "disabled"; -+ }; -+ -+ can1: can@1d000 { -+ status = "disabled"; -+ }; -+ }; -+ -+ pci0: pcie@ffe09000 { -+ reg = <0 0xffe09000 0 0x1000>; -+ ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 -+ 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; -+ pcie@0 { -+ ranges = <0x2000000 0x0 0xa0000000 -+ 0x2000000 0x0 0xa0000000 -+ 0x0 0x20000000 -+ -+ 0x1000000 0x0 0x0 -+ 0x1000000 0x0 0x0 -+ 0x0 0x100000>; -+ }; -+ }; -+ -+ pci1: pcie@ffe0a000 { -+ reg = <0 0xffe0a000 0 0x1000>; -+ ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 -+ 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; -+ pcie@0 { -+ ranges = <0x2000000 0x0 0x80000000 -+ 0x2000000 0x0 0x80000000 -+ 0x0 0x20000000 -+ -+ 0x1000000 0x0 0x0 -+ 0x1000000 0x0 0x0 -+ 0x0 0x100000>; -+ }; -+ }; -+ -+ ifc: ifc@ffe1e000 { -+ status = "disabled"; -+ }; -+ -+ leds { -+ compatible = "gpio-leds"; -+ -+ system { -+ gpios = <&gpio0 2 1>; /* active low */ -+ label = "tp-link:blue:system"; -+ }; -+ -+ usb1 { -+ gpios = <&gpio0 3 1>; /* active low */ -+ label = "tp-link:green:usb1"; -+ }; -+ -+ usb2 { -+ gpios = <&gpio0 4 1>; /* active low */ -+ label = "tp-link:green:usb2"; -+ }; -+ }; -+ -+ buttons { -+ compatible = "gpio-keys"; -+ -+ reset { -+ label = "Reset button"; -+ gpios = <&gpio0 5 1>; /* active low */ -+ linux,code = <0x198>; /* KEY_RESTART */ -+ }; -+ }; -+}; -+ -+/include/ "fsl/p1010si-post.dtsi" ---- a/arch/powerpc/boot/wrapper -+++ b/arch/powerpc/boot/wrapper -@@ -197,6 +197,10 @@ cuboot*) - *-mpc85*|*-tqm85*|*-sbc85*) - platformo=$object/cuboot-85xx.o - ;; -+ *-tl-wdr4900-v1) -+ platformo=$object/cuboot-tl-wdr4900-v1.o -+ link_address='0x1000000' -+ ;; - *-amigaone) - link_address='0x800000' - ;; ---- a/arch/powerpc/platforms/85xx/Kconfig -+++ b/arch/powerpc/platforms/85xx/Kconfig -@@ -147,6 +147,17 @@ config STX_GP3 - select CPM2 - select DEFAULT_UIMAGE - -+config TL_WDR4900_V1 -+ bool "TP-Link TL-WDR4900 v1" -+ select DEFAULT_UIMAGE -+ select ARCH_REQUIRE_GPIOLIB -+ select GPIO_MPC8XXX -+ help -+ This option enables support for the TP-Link TL-WDR4900 v1 board. -+ -+ This board is a Concurrent Dual-Band wireless router with a -+ Freescale P1014 SoC. -+ - config TQM8540 - bool "TQ Components TQM8540" - help ---- a/arch/powerpc/platforms/85xx/Makefile -+++ b/arch/powerpc/platforms/85xx/Makefile -@@ -26,6 +26,7 @@ obj-$(CONFIG_T4240_QDS) += t4240_qds.o - obj-$(CONFIG_B4_QDS) += b4_qds.o corenet_ds.o - obj-$(CONFIG_STX_GP3) += stx_gp3.o - obj-$(CONFIG_TQM85xx) += tqm85xx.o -+obj-$(CONFIG_TL_WDR4900_V1) += tl_wdr4900_v1.o - obj-$(CONFIG_SBC8548) += sbc8548.o - obj-$(CONFIG_PPA8548) += ppa8548.o - obj-$(CONFIG_SOCRATES) += socrates.o socrates_fpga_pic.o ---- /dev/null -+++ b/arch/powerpc/platforms/85xx/tl_wdr4900_v1.c -@@ -0,0 +1,145 @@ -+/* -+ * TL-WDR4900 v1 board setup -+ * -+ * Copyright (c) 2013 Gabor Juhos <juhosg@openwrt.org> -+ * -+ * Based on: -+ * p1010rdb.c: -+ * P1010RDB Board Setup -+ * Copyright 2011 Freescale Semiconductor Inc. -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ */ -+ -+#include <linux/stddef.h> -+#include <linux/kernel.h> -+#include <linux/pci.h> -+#include <linux/delay.h> -+#include <linux/interrupt.h> -+#include <linux/of_platform.h> -+#include <linux/ath9k_platform.h> -+#include <linux/leds.h> -+ -+#include <asm/time.h> -+#include <asm/machdep.h> -+#include <asm/pci-bridge.h> -+#include <mm/mmu_decl.h> -+#include <asm/prom.h> -+#include <asm/udbg.h> -+#include <asm/mpic.h> -+ -+#include <sysdev/fsl_soc.h> -+#include <sysdev/fsl_pci.h> -+ -+#include "mpc85xx.h" -+ -+void __init tl_wdr4900_v1_pic_init(void) -+{ -+ struct mpic *mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | -+ MPIC_SINGLE_DEST_CPU, -+ 0, 256, " OpenPIC "); -+ -+ BUG_ON(mpic == NULL); -+ -+ mpic_init(mpic); -+} -+ -+#ifdef CONFIG_PCI -+static struct gpio_led tl_wdr4900_v1_wmac_leds_gpio[] = { -+ { -+ .name = "tp-link:blue:wps", -+ .gpio = 1, -+ .active_low = 1, -+ }, -+}; -+ -+static struct ath9k_platform_data tl_wdr4900_v1_wmac0_data = { -+ .led_pin = 0, -+ .eeprom_name = "pci_wmac0.eeprom", -+ .leds = tl_wdr4900_v1_wmac_leds_gpio, -+ .num_leds = ARRAY_SIZE(tl_wdr4900_v1_wmac_leds_gpio), -+}; -+ -+static struct ath9k_platform_data tl_wdr4900_v1_wmac1_data = { -+ .led_pin = 0, -+ .eeprom_name = "pci_wmac1.eeprom", -+}; -+ -+static void tl_wdr4900_v1_pci_wmac_fixup(struct pci_dev *dev) -+{ -+ if (!machine_is(tl_wdr4900_v1)) -+ return; -+ -+ if (dev->bus->number == 1 && -+ PCI_SLOT(dev->devfn) == 0) { -+ dev->dev.platform_data = &tl_wdr4900_v1_wmac0_data; -+ return; -+ } -+ -+ if (dev->bus->number == 3 && -+ PCI_SLOT(dev->devfn) == 0 && -+ dev->device == 0xabcd) { -+ dev->dev.platform_data = &tl_wdr4900_v1_wmac1_data; -+ -+ /* -+ * The PCI header of the AR9381 chip is not programmed -+ * correctly by the bootloader and the device uses wrong -+ * data due to that. Replace the broken values with the -+ * correct ones. -+ */ -+ dev->device = 0x30; -+ dev->class = 0x028000; -+ -+ pr_info("pci %s: AR9381 fixup applied\n", pci_name(dev)); -+ } -+} -+ -+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ATHEROS, PCI_ANY_ID, -+ tl_wdr4900_v1_pci_wmac_fixup); -+#endif /* CONFIG_PCI */ -+ -+/* -+ * Setup the architecture -+ */ -+static void __init tl_wdr4900_v1_setup_arch(void) -+{ -+ if (ppc_md.progress) -+ ppc_md.progress("tl_wdr4900_v1_setup_arch()", 0); -+ -+ fsl_pci_assign_primary(); -+ -+ printk(KERN_INFO "TL-WDR4900 v1 board from TP-Link\n"); -+} -+ -+machine_arch_initcall(tl_wdr4900_v1, mpc85xx_common_publish_devices); -+machine_arch_initcall(tl_wdr4900_v1, swiotlb_setup_bus_notifier); -+ -+/* -+ * Called very early, device-tree isn't unflattened -+ */ -+static int __init tl_wdr4900_v1_probe(void) -+{ -+ unsigned long root = of_get_flat_dt_root(); -+ -+ if (of_flat_dt_is_compatible(root, "tp-link,TL-WDR4900v1")) -+ return 1; -+ -+ return 0; -+} -+ -+define_machine(tl_wdr4900_v1) { -+ .name = "Freescale P1014", -+ .probe = tl_wdr4900_v1_probe, -+ .setup_arch = tl_wdr4900_v1_setup_arch, -+ .init_IRQ = tl_wdr4900_v1_pic_init, -+#ifdef CONFIG_PCI -+ .pcibios_fixup_bus = fsl_pcibios_fixup_bus, -+#endif -+ .get_irq = mpic_get_irq, -+ .restart = fsl_rstcr_restart, -+ .calibrate_decr = generic_calibrate_decr, -+ .progress = udbg_progress, -+}; |