diff options
Diffstat (limited to 'target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts')
| -rw-r--r-- | target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts | 249 |
1 files changed, 249 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts new file mode 100644 index 0000000000..3dcbac21a4 --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/ws-ap3825i.dts @@ -0,0 +1,249 @@ +// SPDX-License-Identifier: GPL-2.0-or-later or MIT + +/include/ "fsl/p1020si-pre.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "Extreme Networks WS-AP3825i"; + compatible = "extreme-networks,ws-ap3825i"; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet2; + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + }; + + chosen { + bootargs-override = "console=ttyS0,115200"; + }; + + memory { + device_type = "memory"; + }; + + led_spi { + /* + * This is currently non-functioning because the spi-gpio + * driver refuses to register when presented with this node. + */ + compatible = "spi-gpio"; + #address-cells = <1>; + #size-cells = <0>; + + sck-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + mosi-gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + num-chipselects = <0>; + + spi_gpio: led_gpio@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <1>; + spi-max-frequency = <100000>; + }; + }; + + leds { + compatible = "gpio-leds"; + + wifi1 { + gpios = <&spi_gpio 3 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:radio1"; + linux,default-trigger = "phy0tpt"; + }; + + wifi2 { + gpios = <&spi_gpio 2 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:radio2"; + linux,default-trigger = "phy1tpt"; + }; + + led_power_green: power_green { + gpios = <&spi_gpio 0 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:power"; + }; + + led_power_red: power_red { + gpios = <&spi_gpio 1 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:red:power"; + }; + + eth0_red { + gpios = <&spi_gpio 6 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:red:eth0"; + }; + + eth0_green { + gpios = <&spi_gpio 4 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:eth0"; + }; + + eth1_red { + gpios = <&spi_gpio 7 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:red:eth1"; + }; + + eth1_green { + gpios = <&spi_gpio 5 GPIO_ACTIVE_HIGH>; + label = "ws-ap3825i:green:eth1"; + }; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + lbc: localbus@ffe05000 { + reg = <0 0xffe05000 0 0x1000>; + ranges = <0x0 0x0 0x0 0xec000000 0x4000000>; + + nor@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x4000000>; + bank-width = <2>; + device-width = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "denx,fit"; + reg = <0x0 0x3d60000>; + label = "firmware"; + }; + + partition@3d60000 { + reg = <0x3d60000 0x20000>; + label = "calib"; + read-only; + }; + + partition@3d80000{ + reg = <0x3d80000 0x80000>; + label = "u-boot"; + read-only; + }; + + partition@3e00000{ + reg = <0x3e00000 0x100000>; + label = "nvram"; + read-only; + }; + + partition@3f00000 { + reg = <0x3f00000 0x20000>; + label = "cfg2"; + read-only; + }; + + partition@3f20000 { + reg = <0x3f20000 0x20000>; + label = "cfg1"; + read-only; + }; + }; + }; + }; + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + gpio0: gpio-controller@fc00 { + }; + + mdio@24000 { + phy0: ethernet-phy@0 { + interrupts = <3 1 0 0>; + reg = <0x5>; + reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + }; + + phy2: ethernet-phy@2 { + interrupts = <1 1 0 0>; + reg = <0x6>; + reset-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + }; + }; + + mdio@25000 { + status = "disabled"; + }; + + mdio@26000 { + status = "disabled"; + }; + + enet0: ethernet@b0000 { + status = "okay"; + phy-handle = <&phy0>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + status = "disabled"; + }; + + enet2: ethernet@b2000 { + status = "okay"; + phy-handle = <&phy2>; + phy-connection-type = "rgmii-id"; + }; + + usb@22000 { + phy_type = "ulpi"; + dr_mode = "host"; + }; + + usb@23000 { + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; + reg = <0 0xffe09000 0 0x1000>; + pcie@0 { + ranges = <0x2000000 0x0 0xa0000000 + 0x2000000 0x0 0xa0000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; + + pci1: pcie@ffe0a000 { + reg = <0 0xffe0a000 0 0x1000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>; + pcie@0 { + ranges = <0x2000000 0x0 0x80000000 + 0x2000000 0x0 0x80000000 + 0x0 0x20000000 + + 0x1000000 0x0 0x0 + 0x1000000 0x0 0x0 + 0x0 0x100000>; + }; + }; +}; + +/include/ "fsl/p1020si-post.dtsi" |