diff options
Diffstat (limited to 'target/linux/mpc85xx/files/arch/powerpc/boot/dts/firebox-t10.dts')
| -rw-r--r-- | target/linux/mpc85xx/files/arch/powerpc/boot/dts/firebox-t10.dts | 268 |
1 files changed, 268 insertions, 0 deletions
diff --git a/target/linux/mpc85xx/files/arch/powerpc/boot/dts/firebox-t10.dts b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/firebox-t10.dts new file mode 100644 index 0000000000..607706a2d4 --- /dev/null +++ b/target/linux/mpc85xx/files/arch/powerpc/boot/dts/firebox-t10.dts @@ -0,0 +1,268 @@ +// SPDX-License-Identifier: GPL-2.0-or-later or MIT + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> + +/include/ "fsl/p1010si-pre.dtsi" + +/ { + model = "Watchguard Firebox T10"; + compatible = "watchguard,firebox-t10"; + + chosen { + bootargs = "console=ttyS0,115200"; + bootargs-override = "console=ttyS0,115200"; + }; + + aliases { + spi0 = &spi0; + led-boot = &led_mode; + led-failsafe = &led_failover; + led-running = &led_mode; + led-upgrade = &led_attention; + }; + + memory { + device_type = "memory"; + }; + + leds { + compatible = "gpio-leds"; + + led_attention: attention_orange { + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; + label = "orange:attention"; + }; + + status_red { + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + label = "red:status"; + }; + + led_mode: mode_green { + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + label = "green:mode"; + }; + + led_failover: failover_green { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + label = "green:failover"; + }; + }; + + buttons { + compatible = "gpio-keys"; + + reset { + label = "Reset button"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + + soc: soc@ffe00000 { + ranges = <0x0 0x0 0xffe00000 0x100000>; + + i2c@3000 { + rtc@30 { + compatible = "sii,s35390a"; + reg = <0x30>; + }; + }; + + spi0: spi@7000 { + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <25000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + uboot: partition@0 { + reg = <0x0 0x90000>; + label = "u-boot"; + read-only; + }; + + partition@90000 { + reg = <0x90000 0x10000>; + label = "u-boot-env"; + }; + + partition@a0000 { + reg = <0xa0000 0x20000>; + label = "cfgxxx"; + read-only; + }; + + partition@c0000 { + reg = <0xc0000 0x40000>; + label = "device_id"; + read-only; + }; + }; + }; + }; + + gpio0: gpio-controller@fc00 { + }; + + usb@22000 { + phy_type = "utmi"; + dr_mode = "host"; + }; + + mdio@24000 { + phy1: ethernet-phy@1 { + reg = <0x1>; + }; + + phy2: ethernet-phy@2 { + reg = <0x2>; + }; + + phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + mdio@25000 { + tbi_phy1: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + mdio@26000 { + tbi_phy2: tbi-phy@11 { + reg = <0x11>; + device_type = "tbi-phy"; + }; + }; + + enet0: ethernet@b0000 { + phy-handle = <&phy1>; + phy-connection-type = "rgmii-id"; + }; + + enet1: ethernet@b1000 { + tbi-handle = <&tbi_phy1>; + phy-handle = <&phy2>; + phy-connection-type = "sgmii"; + }; + + enet2: ethernet@b2000 { + tbi-handle = <&tbi_phy2>; + phy-handle = <&phy3>; + phy-connection-type = "sgmii"; + }; + + sdhc@2e000 { + status = "disabled"; + }; + + serial1: serial@4600 { + status = "disabled"; + }; + + can0: can@1c000 { + status = "disabled"; + }; + + can1: can@1d000 { + status = "disabled"; + }; + }; + + pci0: pcie@ffe09000 { + status = "disabled"; + }; + + pci1: pcie@ffe0a000 { + status = "disabled"; + }; + + ifc: ifc@ffe1e000 { + reg = <0x0 0xffe1e000 0 0x2000>; + + /* NOR, NAND Flashes and CPLD on board */ + ranges = <0x0 0x0 0x0 0xee000000 0x02000000 + 0x1 0x0 0x0 0xff800000 0x00010000 + 0x3 0x0 0x0 0xffb00000 0x00000020>; + + nand@1,0 { + compatible = "fsl,ifc-nand"; + reg = <0x1 0x0 0x10000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + /* + * Original partition layout: + * 0x000000000000-0x000000020000 : "NAND (RW) WG DTB Image" + * 0x000000020000-0x000000520000 : "NAND (RW) WG SYSA Kernel" + * 0x000000520000-0x000007f00000 : "NAND (RW) WG SYSA_CODE" + * 0x000007f00000-0x000008400000 : "NAND (RW) WG SYSB Kernel" + * 0x000008400000-0x000009c00000 : "NAND (RW) WG SYSB_CODE" + * 0x000009c00000-0x00000a100000 : "NAND (RW) WG SYSA2 Kernel" + * 0x00000a100000-0x000011ae0000 : "NAND (RW) WG SYSA_CODE2" + * 0x000011ae0000-0x000020000000 : "NAND (RW) WG SYSA_DATA" + */ + + partition@0 { + reg = <0x0 0x20000>; + label = "wg-dtb"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x500000>; + label = "kernel"; + }; + + partition@520000 { + reg = <0x520000 0x79e0000>; + label = "wg-sysa-rootfs"; + read-only; + }; + + partition@7f00000 { + reg = <0x7f00000 0x500000>; + label = "wg-sysb-kernel"; + read-only; + }; + + partition@8400000 { + reg = <0x8400000 0x1800000>; + label = "wg-sysb-rootfs"; + read-only; + }; + + partition@9c00000 { + reg = <0x9c00000 0x500000>; + label = "wg-sysa2-kernel"; + read-only; + }; + + partition@a100000 { + reg = <0xa100000 0x79e0000>; + label = "wg-sysa2-rootfs"; + read-only; + }; + + partition@11ae0000 { + reg = <0x11ae0000 0xe520000>; + label = "ubi"; + }; + }; + }; + }; +}; + +/include/ "fsl/p1010si-post.dtsi" |