1 files changed, 0 insertions, 58 deletions
diff --git a/target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch b/target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch
deleted file mode 100644
index eca087c8a2..0000000000
--- a/target/linux/mediatek/patches-4.4/0057-mtd-mediatek-device-tree-docs-for-MTK-Smart-Device-G.patch
+++ /dev/null
@@ -1,58 +0,0 @@
-From 0fe612b501f1d56d76b2858d2ae779c1e766d064 Mon Sep 17 00:00:00 2001
-From: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
-Date: Wed, 2 Mar 2016 12:00:11 -0500
-Subject: [PATCH 57/91] mtd: mediatek: device tree docs for MTK Smart Device
- Gen1 NAND
-
-This patch adds documentation support for Smart Device Gen1 type of
-NAND controllers.
-
-Mediatek's SoC 2701 is one of the SoCs that implements this controller.
-
-Signed-off-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org>
----
- .../devicetree/bindings/mtd/mtksdg1-nand.txt       |   38 ++++++++++++++++++++
- 1 file changed, 38 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/mtd/mtksdg1-nand.txt
-@@ -0,0 +1,38 @@
-+MTK Smart Device SoCs NAND controller DT binding
-+
-+Required properties:
-+- compatible:          Should be "mediatek,mt2701-nfc".
-+- reg:                 The first contains base physical address and size of
-+                       NAND controller's registers. The second contains base
-+                       physical address and size of NAND ECC engine.
-+- interrupts:          the NFC NFI interrupt, and the NFC ECC interrupt
-+- clocks:              NAND controller clocks.
-+- clock-names:         NAND controller clocks internal name.
-+- vmch-supply:         NAND power supply.
-+- #address-cells:      Partition address, should be set 1.
-+- #size-cells:         Partition size, should be set 1.
-+
-+Optional properties:
-+
-+nand-on-flash-bbt:  Use a flash based bad block table.
-+
-+Optional subnodes:
-+- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt
-+
-+Example:
-+
-+	nand: nand@1100d000 {
-+		compatible = "mediatek,mt2701-nfc";
-+		reg = <0 0x1100d000 0 0x1000>, <0 0x1100e000 0 0x1000>;
-+		interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_LOW>,
-+			<GIC_SPI 55 IRQ_TYPE_LEVEL_LOW>;
-+		clocks = <&pericfg CLK_PERI_NFI>, <&pericfg CLK_PERI_NFI_ECC>,
-+			<&pericfg CLK_PERI_NFI_PAD>;
-+		clock-names = "nfi_ck", "nfi_ecc_ck", "nfi_pad_ck";
-+		vmch-supply = <&mt6323_vmch_reg>;
-+		status = "disabled";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+
-+		...
-+	};