diff options
Diffstat (limited to 'target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c')
| -rw-r--r-- | target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c | 2415 |
1 files changed, 0 insertions, 2415 deletions
diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c deleted file mode 100644 index bf4ef044d1..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/svlan.c +++ /dev/null @@ -1,2415 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in SVLAN module. - * - */ - -#include <rtk_switch.h> -#include <rtk_error.h> -#include <svlan.h> -#include <vlan.h> -#include <string.h> - -#include <rtl8367c_asicdrv.h> -#include <rtl8367c_asicdrv_svlan.h> - -rtk_uint8 svlan_mbrCfgUsage[RTL8367C_SVIDXNO]; -rtk_uint16 svlan_mbrCfgVid[RTL8367C_SVIDXNO]; -rtk_svlan_lookupType_t svlan_lookupType; -/* Function Name: - * rtk_svlan_init - * Description: - * Initialize SVLAN Configuration - * Input: - * None - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 for Q-in-Q SLAN design. - * User can set mathced ether type as service provider supported protocol. - */ -rtk_api_ret_t rtk_svlan_init(void) -{ - rtk_uint32 i; - rtk_api_ret_t retVal; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - rtk_uint32 svidx; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /*default use C-priority*/ - if ((retVal = rtl8367c_setAsicSvlanPrioritySel(SPRISEL_CTAGPRI)) != RT_ERR_OK) - return retVal; - - /*Drop SVLAN untag frame*/ - if ((retVal = rtl8367c_setAsicSvlanIngressUntag(UNTAG_DROP)) != RT_ERR_OK) - return retVal; - - /*Drop SVLAN unmatch frame*/ - if ((retVal = rtl8367c_setAsicSvlanIngressUnmatch(UNMATCH_DROP)) != RT_ERR_OK) - return retVal; - - /*Set TPID to 0x88a8*/ - if ((retVal = rtl8367c_setAsicSvlanTpid(0x88a8)) != RT_ERR_OK) - return retVal; - - /*Clean Uplink Port Mask to none*/ - if ((retVal = rtl8367c_setAsicSvlanUplinkPortMask(0)) != RT_ERR_OK) - return retVal; - - /*Clean SVLAN Member Configuration*/ - for (i=0; i<= RTL8367C_SVIDXMAX; i++) - { - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - } - - /*Clean C2S Configuration*/ - for (i=0; i<= RTL8367C_C2SIDXMAX; i++) - { - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, 0,0,0)) != RT_ERR_OK) - return retVal; - } - - /*Clean SP2C Configuration*/ - for (i=0; i <= RTL8367C_SP2CMAX ; i++) - { - memset(&svlanSP2CConf, 0, sizeof(rtl8367c_svlan_s2c_t)); - if ((retVal = rtl8367c_setAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - } - - /*Clean MC2S Configuration*/ - for (i=0 ; i<= RTL8367C_MC2SIDXMAX; i++) - { - memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - } - - - if ((retVal = rtk_svlan_lookupType_set(SVLAN_LOOKUP_S64MBRCGF)) != RT_ERR_OK) - return retVal; - - - for (svidx = 0; svidx <= RTL8367C_SVIDXMAX; svidx++) - { - svlan_mbrCfgUsage[svidx] = FALSE; - } - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_servicePort_add - * Description: - * Add one service port in the specified device - * Input: - * port - Port id. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API is setting which port is connected to provider switch. All frames receiving from this port must - * contain accept SVID in S-tag field. - */ -rtk_api_ret_t rtk_svlan_servicePort_add(rtk_port_t port) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicSvlanUplinkPortMask(&pmsk)) != RT_ERR_OK) - return retVal; - - pmsk = pmsk | (1<<rtk_switch_port_L2P_get(port)); - - if ((retVal = rtl8367c_setAsicSvlanUplinkPortMask(pmsk)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_servicePort_get - * Description: - * Get service ports in the specified device. - * Input: - * None - * Output: - * pSvlan_portmask - pointer buffer of svlan ports. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API is setting which port is connected to provider switch. All frames receiving from this port must - * contain accept SVID in S-tag field. - */ -rtk_api_ret_t rtk_svlan_servicePort_get(rtk_portmask_t *pSvlan_portmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 phyMbrPmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_portmask) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanUplinkPortMask(&phyMbrPmask)) != RT_ERR_OK) - return retVal; - - if(rtk_switch_portmask_P2L_get(phyMbrPmask, pSvlan_portmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_servicePort_del - * Description: - * Delete one service port in the specified device - * Input: - * port - Port id. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API is removing SVLAN service port in the specified device. - */ -rtk_api_ret_t rtk_svlan_servicePort_del(rtk_port_t port) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmsk; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* check port valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicSvlanUplinkPortMask(&pmsk)) != RT_ERR_OK) - return retVal; - - pmsk = pmsk & ~(1<<rtk_switch_port_L2P_get(port)); - - if ((retVal = rtl8367c_setAsicSvlanUplinkPortMask(pmsk)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_tpidEntry_set - * Description: - * Configure accepted S-VLAN ether type. - * Input: - * svlan_tag_id - Ether type of S-tag frame parsing in uplink ports. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 for Q-in-Q SLAN design. - * User can set mathced ether type as service provider supported protocol. - */ -rtk_api_ret_t rtk_svlan_tpidEntry_set(rtk_svlan_tpid_t svlan_tag_id) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svlan_tag_id>RTK_MAX_NUM_OF_PROTO_TYPE) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicSvlanTpid(svlan_tag_id)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_tpidEntry_get - * Description: - * Get accepted S-VLAN ether type setting. - * Input: - * None - * Output: - * pSvlan_tag_id - Ether type of S-tag frame parsing in uplink ports. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * This API is setting which port is connected to provider switch. All frames receiving from this port must - * contain accept SVID in S-tag field. - */ -rtk_api_ret_t rtk_svlan_tpidEntry_get(rtk_svlan_tpid_t *pSvlan_tag_id) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_tag_id) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanTpid(pSvlan_tag_id)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_priorityRef_set - * Description: - * Set S-VLAN upstream priority reference setting. - * Input: - * ref - reference selection parameter. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The API can set the upstream SVLAN tag priority reference source. The related priority - * sources are as following: - * - REF_INTERNAL_PRI, - * - REF_CTAG_PRI, - * - REF_SVLAN_PRI, - * - REF_PB_PRI. - */ -rtk_api_ret_t rtk_svlan_priorityRef_set(rtk_svlan_pri_ref_t ref) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (ref >= REF_PRI_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicSvlanPrioritySel(ref)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_priorityRef_get - * Description: - * Get S-VLAN upstream priority reference setting. - * Input: - * None - * Output: - * pRef - reference selection parameter. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * Note: - * The API can get the upstream SVLAN tag priority reference source. The related priority - * sources are as following: - * - REF_INTERNAL_PRI, - * - REF_CTAG_PRI, - * - REF_SVLAN_PRI, - * - REF_PB_PRI - */ -rtk_api_ret_t rtk_svlan_priorityRef_get(rtk_svlan_pri_ref_t *pRef) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pRef) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanPrioritySel(pRef)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_memberPortEntry_set - * Description: - * Configure system SVLAN member content - * Input: - * svid - SVLAN id - * psvlan_cfg - SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. - * Note: - * The API can set system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped by default setup. - * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_set(rtk_vlan_t svid, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtk_int32 i; - rtk_uint32 empty_idx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_uint32 phyMbrPmask; - rtk_vlan_cfg_t vlanCfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if(svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->memberport)); - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->untagport)); - - if (pSvlan_cfg->fiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if (pSvlan_cfg->priority > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if (pSvlan_cfg->efiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->efid > RTL8367C_EFIDMAX) - return RT_ERR_L2_FID; - - if(SVLAN_LOOKUP_C4KVLAN == svlan_lookupType) - { - if ((retVal = rtk_vlan_get(svid, &vlanCfg)) != RT_ERR_OK) - return retVal; - - vlanCfg.mbr = pSvlan_cfg->memberport; - vlanCfg.untag = pSvlan_cfg->untagport; - - if ((retVal = rtk_vlan_set(svid, &vlanCfg)) != RT_ERR_OK) - return retVal; - - empty_idx = 0xFF; - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - if (svid == svlan_mbrCfgVid[i] && TRUE == svlan_mbrCfgUsage[i]) - { - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = svid; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - - /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - svlanMemConf.vs_efid = 1; - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - else if (FALSE == svlan_mbrCfgUsage[i] && 0xFF == empty_idx) - { - empty_idx = i; - } - } - - if (empty_idx != 0xFF) - { - svlan_mbrCfgUsage[empty_idx] = TRUE; - svlan_mbrCfgVid[empty_idx] = svid; - - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = svid; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - - /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - svlanMemConf.vs_efid = 1; - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - } - - return RT_ERR_OK; - } - - - empty_idx = 0xFF; - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - /* - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - */ - if (svid == svlan_mbrCfgVid[i] && TRUE == svlan_mbrCfgUsage[i]) - { - svlanMemConf.vs_svid = svid; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_member = phyMbrPmask; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_untag = phyMbrPmask; - - svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; - svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - - /*all items are reset means deleting*/ - if( 0 == svlanMemConf.vs_member && - 0 == svlanMemConf.vs_untag && - 0 == svlanMemConf.vs_force_fid && - 0 == svlanMemConf.vs_fid_msti && - 0 == svlanMemConf.vs_priority && - 0 == svlanMemConf.vs_efiden && - 0 == svlanMemConf.vs_efid) - { - svlan_mbrCfgUsage[i] = FALSE; - svlan_mbrCfgVid[i] = 0; - - /* Clear SVID also */ - svlanMemConf.vs_svid = 0; - } - else - { - svlan_mbrCfgUsage[i] = TRUE; - svlan_mbrCfgVid[i] = svlanMemConf.vs_svid; - - if(0 == svlanMemConf.vs_svid) - { - /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - { - svlanMemConf.vs_efid = 1; - } - } - } - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - else if (FALSE == svlan_mbrCfgUsage[i] && 0xFF == empty_idx) - { - empty_idx = i; - } - } - - if (empty_idx != 0xFF) - { - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = svid; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_member = phyMbrPmask; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_untag = phyMbrPmask; - - svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; - svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - - /*change efid for empty svid 0*/ - if(0 == svlanMemConf.vs_svid) - { /*for create check*/ - if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) - { - svlanMemConf.vs_efid = 1; - } - } - - svlan_mbrCfgUsage[empty_idx] = TRUE; - svlan_mbrCfgVid[empty_idx] = svlanMemConf.vs_svid; - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlanMemConf)) != RT_ERR_OK) - { - return retVal; - } - - return RT_ERR_OK; - } - - return RT_ERR_SVLAN_TABLE_FULL; -} - -/* Function Name: - * rtk_svlan_memberPortEntry_get - * Description: - * Get SVLAN member Configure. - * Input: - * svid - SVLAN id - * Output: - * pSvlan_cfg - SVLAN member configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_get(rtk_vlan_t svid, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - pSvlan_cfg->svid = svlanMemConf.vs_svid; - - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_member,&(pSvlan_cfg->memberport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_untag,&(pSvlan_cfg->untagport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - pSvlan_cfg->fiden = svlanMemConf.vs_force_fid; - pSvlan_cfg->fid = svlanMemConf.vs_fid_msti; - pSvlan_cfg->priority = svlanMemConf.vs_priority; - pSvlan_cfg->efiden = svlanMemConf.vs_efiden; - pSvlan_cfg->efid = svlanMemConf.vs_efid; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - -} - -/* Function Name: - * rtk_svlan_memberPortEntry_adv_set - * Description: - * Configure system SVLAN member by index - * Input: - * idx - Index (0 ~ 63) - * psvlan_cfg - SVLAN member configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_PORT_MASK - Invalid portmask. - * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. - * Note: - * The API can set system 64 accepted s-tag frame format by index. - * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. - * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_adv_set(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_uint32 phyMbrPmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if (idx > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - if (pSvlan_cfg->svid>RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->memberport)); - - RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->untagport)); - - if (pSvlan_cfg->fiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - if (pSvlan_cfg->priority > RTL8367C_PRIMAX) - return RT_ERR_VLAN_PRIORITY; - - if (pSvlan_cfg->efiden > ENABLED) - return RT_ERR_ENABLE; - - if (pSvlan_cfg->efid > RTL8367C_EFIDMAX) - return RT_ERR_L2_FID; - - memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); - svlanMemConf.vs_svid = pSvlan_cfg->svid; - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_member = phyMbrPmask; - - if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) - return RT_ERR_FAILED; - - svlanMemConf.vs_untag = phyMbrPmask; - - - svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; - svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; - svlanMemConf.vs_priority = pSvlan_cfg->priority; - svlanMemConf.vs_efiden = pSvlan_cfg->efiden; - svlanMemConf.vs_efid = pSvlan_cfg->efid; - - if(0 == svlanMemConf.vs_svid && - 0 == svlanMemConf.vs_member && - 0 == svlanMemConf.vs_untag && - 0 == svlanMemConf.vs_force_fid && - 0 == svlanMemConf.vs_fid_msti && - 0 == svlanMemConf.vs_priority && - 0 == svlanMemConf.vs_efiden && - 0 == svlanMemConf.vs_efid) - { - svlan_mbrCfgUsage[idx] = FALSE; - svlan_mbrCfgVid[idx] = 0; - } - else - { - svlan_mbrCfgUsage[idx] = TRUE; - svlan_mbrCfgVid[idx] = svlanMemConf.vs_svid; - } - - if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_memberPortEntry_adv_get - * Description: - * Get SVLAN member Configure by index. - * Input: - * idx - Index (0 ~ 63) - * Output: - * pSvlan_cfg - SVLAN member configuration - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted - * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. - */ -rtk_api_ret_t rtk_svlan_memberPortEntry_adv_get(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg) -{ - rtk_api_ret_t retVal; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvlan_cfg) - return RT_ERR_NULL_POINTER; - - if (idx > RTL8367C_SVIDXMAX) - return RT_ERR_SVLAN_ENTRY_INDEX; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - pSvlan_cfg->svid = svlanMemConf.vs_svid; - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_member,&(pSvlan_cfg->memberport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_untag,&(pSvlan_cfg->untagport)) != RT_ERR_OK) - return RT_ERR_FAILED; - - pSvlan_cfg->fiden = svlanMemConf.vs_force_fid; - pSvlan_cfg->fid = svlanMemConf.vs_fid_msti; - pSvlan_cfg->priority = svlanMemConf.vs_priority; - pSvlan_cfg->efiden = svlanMemConf.vs_efiden; - pSvlan_cfg->efid = svlanMemConf.vs_efid; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_svlan_defaultSvlan_set - * Description: - * Configure default egress SVLAN. - * Input: - * port - Source port - * svid - SVLAN id - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * Note: - * The API can set port n S-tag format index while receiving frame from port n - * is transmit through uplink port with s-tag field - */ -rtk_api_ret_t rtk_svlan_defaultSvlan_set(rtk_port_t port, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - /* svid must be 0~4095 */ - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - if ((retVal = rtl8367c_setAsicSvlanDefaultVlan(rtk_switch_port_L2P_get(port), i)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; -} - -/* Function Name: - * rtk_svlan_defaultSvlan_get - * Description: - * Get the configure default egress SVLAN. - * Input: - * port - Source port - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get port n S-tag format index while receiving frame from port n - * is transmit through uplink port with s-tag field - */ -rtk_api_ret_t rtk_svlan_defaultSvlan_get(rtk_port_t port, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 idx; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicSvlanDefaultVlan(rtk_switch_port_L2P_get(port), &idx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_c2s_add - * Description: - * Configure SVLAN C2S table - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set system C2S configuration. ASIC will check upstream's VID and assign related - * SVID to mathed packet. There are 128 SVLAN C2S configurations. - */ -rtk_api_ret_t rtk_svlan_c2s_add(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx; - rtk_uint32 evid, pmsk, svidx, c2s_svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_port_t phyPort; - rtk_uint16 doneFlag; - - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(src_port); - - phyPort = rtk_switch_port_L2P_get(src_port); - - empty_idx = 0xFFFF; - svidx = 0xFFFF; - doneFlag = FALSE; - - for (i = 0; i<= RTL8367C_SVIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_VID; - - for (i=RTL8367C_C2SIDXMAX; i>=0; i--) - { - if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &c2s_svidx)) != RT_ERR_OK) - return retVal; - - if (evid == vid) - { - /* Check Src_port */ - if(pmsk & (1 << phyPort)) - { - /* Check SVIDX */ - if(c2s_svidx == svidx) - { - /* All the same, do nothing */ - } - else - { - /* New svidx, remove src_port and find a new slot to add a new enrty */ - pmsk = pmsk & ~(1 << phyPort); - if(pmsk == 0) - c2s_svidx = 0; - - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, c2s_svidx)) != RT_ERR_OK) - return retVal; - } - } - else - { - if(c2s_svidx == svidx && doneFlag == FALSE) - { - pmsk = pmsk | (1 << phyPort); - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, svidx)) != RT_ERR_OK) - return retVal; - - doneFlag = TRUE; - } - } - } - else if (evid==0&&pmsk==0) - { - empty_idx = i; - } - } - - if (0xFFFF != empty_idx && doneFlag ==FALSE) - { - if ((retVal = rtl8367c_setAsicSvlanC2SConf(empty_idx, vid, (1<<phyPort), svidx)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - else if(doneFlag == TRUE) - { - return RT_ERR_OK; - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_c2s_del - * Description: - * Delete one C2S entry - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete system C2S configuration. There are 128 SVLAN C2S configurations. - */ -rtk_api_ret_t rtk_svlan_c2s_del(rtk_vlan_t vid, rtk_port_t src_port) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 evid, pmsk, svidx; - rtk_port_t phyPort; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (vid > RTL8367C_EVIDMAX) - return RT_ERR_VLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(src_port); - phyPort = rtk_switch_port_L2P_get(src_port); - - for (i = 0; i <= RTL8367C_C2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &svidx)) != RT_ERR_OK) - return retVal; - - if (evid == vid) - { - if(pmsk & (1 << phyPort)) - { - pmsk = pmsk & ~(1 << phyPort); - if(pmsk == 0) - { - vid = 0; - svidx = 0; - } - - if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, svidx)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_c2s_get - * Description: - * Get configure SVLAN C2S table - * Input: - * vid - VLAN ID - * src_port - Ingress Port - * Output: - * pSvid - SVLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port ID. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get system C2S configuration. There are 128 SVLAN C2S configurations. - */ -rtk_api_ret_t rtk_svlan_c2s_get(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 evid, pmsk, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtk_port_t phyPort; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(src_port); - phyPort = rtk_switch_port_L2P_get(src_port); - - for (i = 0; i <= RTL8367C_C2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &svidx)) != RT_ERR_OK) - return retVal; - - if (evid == vid) - { - if(pmsk & (1 << phyPort)) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_untag_action_set - * Description: - * Configure Action of downstream UnStag packet - * Input: - * action - Action for UnStag - * svid - The SVID assigned to UnStag packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of downstream Un-Stag packet. A SVID assigned - * to the un-stag is also supported by this API. The parameter of svid is - * only referenced when the action is set to UNTAG_ASSIGN - */ -rtk_api_ret_t rtk_svlan_untag_action_set(rtk_svlan_untag_action_t action, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (action >= UNTAG_END) - return RT_ERR_OUT_OF_RANGE; - - if(action == UNTAG_ASSIGN) - { - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - } - - if ((retVal = rtl8367c_setAsicSvlanIngressUntag((rtk_uint32)action)) != RT_ERR_OK) - return retVal; - - if(action == UNTAG_ASSIGN) - { - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - if ((retVal = rtl8367c_setAsicSvlanUntagVlan(i)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_untag_action_get - * Description: - * Get Action of downstream UnStag packet - * Input: - * None - * Output: - * pAction - Action for UnStag - * pSvid - The SVID assigned to UnStag packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can Get action of downstream Un-Stag packet. A SVID assigned - * to the un-stag is also retrieved by this API. The parameter pSvid is - * only refernced when the action is UNTAG_ASSIGN - */ -rtk_api_ret_t rtk_svlan_untag_action_get(rtk_svlan_untag_action_t *pAction, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction || NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanIngressUntag(pAction)) != RT_ERR_OK) - return retVal; - - if(*pAction == UNTAG_ASSIGN) - { - if ((retVal = rtl8367c_getAsicSvlanUntagVlan(&svidx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_unmatch_action_set - * Description: - * Configure Action of downstream Unmatch packet - * Input: - * action - Action for Unmatch - * svid - The SVID assigned to Unmatch packet - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of downstream Un-match packet. A SVID assigned - * to the un-match is also supported by this API. The parameter od svid is - * only refernced when the action is set to UNMATCH_ASSIGN - */ -rtk_api_ret_t rtk_svlan_unmatch_action_set(rtk_svlan_unmatch_action_t action, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (action >= UNMATCH_END) - return RT_ERR_OUT_OF_RANGE; - - if (action == UNMATCH_ASSIGN) - { - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - } - - if ((retVal = rtl8367c_setAsicSvlanIngressUnmatch((rtk_uint32)action)) != RT_ERR_OK) - return retVal; - - if(action == UNMATCH_ASSIGN) - { - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - if ((retVal = rtl8367c_setAsicSvlanUnmatchVlan(i)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - } - } - - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_unmatch_action_get - * Description: - * Get Action of downstream Unmatch packet - * Input: - * None - * Output: - * pAction - Action for Unmatch - * pSvid - The SVID assigned to Unmatch packet - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can Get action of downstream Un-match packet. A SVID assigned - * to the un-match is also retrieved by this API. The parameter pSvid is - * only refernced when the action is UNMATCH_ASSIGN - */ -rtk_api_ret_t rtk_svlan_unmatch_action_get(rtk_svlan_unmatch_action_t *pAction, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction || NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicSvlanIngressUnmatch(pAction)) != RT_ERR_OK) - return retVal; - - if(*pAction == UNMATCH_ASSIGN) - { - if ((retVal = rtl8367c_getAsicSvlanUnmatchVlan(&svidx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - *pSvid = svlanMemConf.vs_svid; - } - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_unassign_action_set - * Description: - * Configure Action of upstream without svid assign action - * Input: - * action - Action for Un-assign - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can configure action of upstream Un-assign svid packet. If action is not - * trap to CPU, the port-based SVID sure be assign as system need - */ -rtk_api_ret_t rtk_svlan_unassign_action_set(rtk_svlan_unassign_action_t action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (action >= UNASSIGN_END) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicSvlanEgressUnassign((rtk_uint32)action); - - return retVal; -} - -/* Function Name: - * rtk_svlan_unassign_action_get - * Description: - * Get action of upstream without svid assignment - * Input: - * None - * Output: - * pAction - Action for Un-assign - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * Note: - * None - */ -rtk_api_ret_t rtk_svlan_unassign_action_get(rtk_svlan_unassign_action_t *pAction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pAction) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicSvlanEgressUnassign(pAction); - - return retVal; -} - -/* Function Name: - * rtk_svlan_dmac_vidsel_set - * Description: - * Set DMAC CVID selection - * Input: - * port - Port - * enable - state of DMAC CVID Selection - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can set DMAC CVID Selection state - */ -rtk_api_ret_t rtk_svlan_dmac_vidsel_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsicSvlanDmacCvidSel(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_dmac_vidsel_get - * Description: - * Get DMAC CVID selection - * Input: - * port - Port - * Output: - * pEnable - state of DMAC CVID Selection - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * This API can get DMAC CVID Selection state - */ -rtk_api_ret_t rtk_svlan_dmac_vidsel_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsicSvlanDmacCvidSel(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_svlan_ipmc2s_add - * Description: - * add ip multicast address to SVLAN - * Input: - * svid - SVLAN VID - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set IP mutlicast to SVID configuration. If upstream packet is IPv4 multicast - * packet and DIP is matched MC2S configuration, ASIC will assign egress SVID to the packet. - * There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_ipmc2s_add(ipaddr_t ipmc, ipaddr_t ipmcMsk,rtk_vlan_t svid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx; - rtk_uint32 svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - if ((ipmc&0xF0000000)!=0xE0000000) - return RT_ERR_INPUT; - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - - empty_idx = 0xFFFF; - - for (i = RTL8367C_MC2SIDXMAX; i >= 0; i--) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && - svlanMC2SConf.sdata==ipmc&& - svlanMC2SConf.smask==ipmcMsk) - { - svlanMC2SConf.svidx = svidx; - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - } - } - else - { - empty_idx = i; - } - } - - if (empty_idx!=0xFFFF) - { - svlanMC2SConf.valid = TRUE; - svlanMC2SConf.svidx = svidx; - svlanMC2SConf.format = SVLAN_MC2S_MODE_IP; - svlanMC2SConf.sdata = ipmc; - svlanMC2SConf.smask = ipmcMsk; - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(empty_idx, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - return RT_ERR_OUT_OF_RANGE; - -} - -/* Function Name: - * rtk_svlan_ipmc2s_del - * Description: - * delete ip multicast address to SVLAN - * Input: - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_ipmc2s_del(ipaddr_t ipmc, ipaddr_t ipmcMsk) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ((ipmc&0xF0000000)!=0xE0000000) - return RT_ERR_INPUT; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && - svlanMC2SConf.sdata==ipmc&& - svlanMC2SConf.smask==ipmcMsk) - { - memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_ipmc2s_get - * Description: - * Get ip multicast address to SVLAN - * Input: - * ipmc - ip multicast address - * ipmcMsk - ip multicast mask - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_ipmc2s_get(ipaddr_t ipmc, ipaddr_t ipmcMsk, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if ((ipmc&0xF0000000)!=0xE0000000) - return RT_ERR_INPUT; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid && - svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && - svlanMC2SConf.sdata == ipmc && - svlanMC2SConf.smask == ipmcMsk) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svlanMC2SConf.svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - *pSvid = svlanMemConf.vs_svid; - return RT_ERR_OK; - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_l2mc2s_add - * Description: - * Add L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set L2 Mutlicast to SVID configuration. If upstream packet is L2 multicast - * packet and DMAC is matched, ASIC will assign egress SVID to the packet. There are 32 - * SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_l2mc2s_add(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t svid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx; - rtk_uint32 svidx, l2add, l2Mask; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - if (mac.octet[0]!= 1&&mac.octet[1]!=0) - return RT_ERR_INPUT; - - l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; - l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - empty_idx = 0xFFFF; - - for (i = RTL8367C_MC2SIDXMAX; i >=0; i--) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && - svlanMC2SConf.sdata==l2add&& - svlanMC2SConf.smask==l2Mask) - { - svlanMC2SConf.svidx = svidx; - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - } - } - else - { - empty_idx = i; - } - } - - if (empty_idx!=0xFFFF) - { - svlanMC2SConf.valid = TRUE; - svlanMC2SConf.svidx = svidx; - svlanMC2SConf.format = SVLAN_MC2S_MODE_MAC; - svlanMC2SConf.sdata = l2add; - svlanMC2SConf.smask = l2Mask; - - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(empty_idx, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_l2mc2s_del - * Description: - * delete L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete Mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_l2mc2s_del(rtk_mac_t mac, rtk_mac_t macMsk) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 l2add, l2Mask; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (mac.octet[0]!= 1&&mac.octet[1]!=0) - return RT_ERR_INPUT; - - l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; - l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && - svlanMC2SConf.sdata==l2add&& - svlanMC2SConf.smask==l2Mask) - { - memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); - if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_l2mc2s_get - * Description: - * Get L2 multicast address to SVLAN - * Input: - * mac - L2 multicast address - * macMsk - L2 multicast address mask - * Output: - * pSvid - SVLAN VID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can get L2 mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. - */ -rtk_api_ret_t rtk_svlan_l2mc2s_get(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t *pSvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i; - rtk_uint32 l2add,l2Mask; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_mc2s_t svlanMC2SConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pSvid) - return RT_ERR_NULL_POINTER; - - if (mac.octet[0]!= 1&&mac.octet[1]!=0) - return RT_ERR_INPUT; - - l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; - l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; - - for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) - return retVal; - - if (TRUE == svlanMC2SConf.valid) - { - if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && - svlanMC2SConf.sdata==l2add&& - svlanMC2SConf.smask==l2Mask) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svlanMC2SConf.svidx, &svlanMemConf)) != RT_ERR_OK) - return retVal; - *pSvid = svlanMemConf.vs_svid; - - return RT_ERR_OK; - } - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_sp2c_add - * Description: - * Add system SP2C configuration - * Input: - * cvid - VLAN ID - * dst_port - Destination port of SVLAN to CVLAN configuration - * svid - SVLAN VID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_VLAN_VID - Invalid VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can add SVID & Destination Port to CVLAN configuration. The downstream frames with assigned - * SVID will be add C-tag with assigned CVID if the output port is the assigned destination port. - * There are 128 SP2C configurations. - */ -rtk_api_ret_t rtk_svlan_sp2c_add(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t cvid) -{ - rtk_api_ret_t retVal, i; - rtk_uint32 empty_idx, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - rtk_port_t port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - if (cvid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(dst_port); - port = rtk_switch_port_L2P_get(dst_port); - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - empty_idx = 0xFFFF; - - for (i=RTL8367C_SP2CMAX; i >=0 ; i--) - { - if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - - if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == port) && (svlanSP2CConf.valid == 1)) - { - empty_idx = i; - break; - } - else if (svlanSP2CConf.valid == 0) - { - empty_idx = i; - } - } - - if (empty_idx!=0xFFFF) - { - svlanSP2CConf.valid = 1; - svlanSP2CConf.vid = cvid; - svlanSP2CConf.svidx = svidx; - svlanSP2CConf.dstport = port; - - if ((retVal = rtl8367c_setAsicSvlanSP2CConf(empty_idx, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - return RT_ERR_OUT_OF_RANGE; - -} - -/* Function Name: - * rtk_svlan_sp2c_get - * Description: - * Get configure system SP2C content - * Input: - * svid - SVLAN VID - * dst_port - Destination port of SVLAN to CVLAN configuration - * Output: - * pCvid - VLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_OUT_OF_RANGE - input out of range. - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * Note: - * The API can get SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. - */ -rtk_api_ret_t rtk_svlan_sp2c_get(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t *pCvid) -{ - rtk_api_ret_t retVal; - rtk_uint32 i, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pCvid) - return RT_ERR_NULL_POINTER; - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(dst_port); - dst_port = rtk_switch_port_L2P_get(dst_port); - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - for (i = 0; i <= RTL8367C_SP2CMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - - if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == dst_port) && (svlanSP2CConf.valid == 1) ) - { - *pCvid = svlanSP2CConf.vid; - return RT_ERR_OK; - } - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_sp2c_del - * Description: - * Delete system SP2C configuration - * Input: - * svid - SVLAN VID - * dst_port - Destination port of SVLAN to CVLAN configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. - * RT_ERR_OUT_OF_RANGE - input out of range. - * Note: - * The API can delete SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. - */ -rtk_api_ret_t rtk_svlan_sp2c_del(rtk_vlan_t svid, rtk_port_t dst_port) -{ - rtk_api_ret_t retVal; - rtk_uint32 i, svidx; - rtl8367c_svlan_memconf_t svlanMemConf; - rtl8367c_svlan_s2c_t svlanSP2CConf; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (svid > RTL8367C_VIDMAX) - return RT_ERR_SVLAN_VID; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(dst_port); - dst_port = rtk_switch_port_L2P_get(dst_port); - - svidx = 0xFFFF; - - for (i = 0; i < RTL8367C_SVIDXNO; i++) - { - if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) - return retVal; - - if (svid == svlanMemConf.vs_svid) - { - svidx = i; - break; - } - } - - if (0xFFFF == svidx) - return RT_ERR_SVLAN_ENTRY_NOT_FOUND; - - for (i = 0; i <= RTL8367C_SP2CMAX; i++) - { - if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - - if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == dst_port) && (svlanSP2CConf.valid == 1) ) - { - svlanSP2CConf.valid = 0; - svlanSP2CConf.vid = 0; - svlanSP2CConf.svidx = 0; - svlanSP2CConf.dstport = 0; - - if ((retVal = rtl8367c_setAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; - } - - } - - return RT_ERR_OUT_OF_RANGE; -} - -/* Function Name: - * rtk_svlan_lookupType_set - * Description: - * Set lookup type of SVLAN - * Input: - * type - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * none - */ -rtk_api_ret_t rtk_svlan_lookupType_set(rtk_svlan_lookupType_t type) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (type >= SVLAN_LOOKUP_END) - return RT_ERR_CHIP_NOT_SUPPORTED; - - - svlan_lookupType = type; - - retVal = rtl8367c_setAsicSvlanLookupType((rtk_uint32)type); - - return retVal; -} - -/* Function Name: - * rtk_svlan_lookupType_get - * Description: - * Get lookup type of SVLAN - * Input: - * pType - lookup type - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * Note: - * none - */ -rtk_api_ret_t rtk_svlan_lookupType_get(rtk_svlan_lookupType_t *pType) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pType) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicSvlanLookupType(pType); - - svlan_lookupType = *pType; - - return retVal; -} - -/* Function Name: - * rtk_svlan_trapPri_set - * Description: - * Set svlan trap priority - * Input: - * priority - priority for trap packets - * Output: - * None - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_QOS_INT_PRIORITY - * Note: - * None - */ -rtk_api_ret_t rtk_svlan_trapPri_set(rtk_pri_t priority) -{ - rtk_api_ret_t retVal; - - RTK_CHK_INIT_STATE(); - - if(priority > RTL8367C_PRIMAX) - return RT_ERR_OUT_OF_RANGE; - - retVal = rtl8367c_setAsicSvlanTrapPriority(priority); - - return retVal; -} /* end of rtk_svlan_trapPri_set */ - -/* Function Name: - * rtk_svlan_trapPri_get - * Description: - * Get svlan trap priority - * Input: - * None - * Output: - * pPriority - priority for trap packets - * Return: - * RT_ERR_OK - * RT_ERR_FAILED - * RT_ERR_NULL_POINTER - input parameter may be null pointer - * Note: - * None - */ -rtk_api_ret_t rtk_svlan_trapPri_get(rtk_pri_t *pPriority) -{ - rtk_api_ret_t retVal; - - RTK_CHK_INIT_STATE(); - - if(NULL == pPriority) - return RT_ERR_NULL_POINTER; - - retVal = rtl8367c_getAsicSvlanTrapPriority(pPriority); - - return retVal; -} /* end of rtk_svlan_trapPri_get */ - - -/* Function Name: - * rtk_svlan_checkAndCreateMbr - * Description: - * Check and create Member configuration and return index - * Input: - * vid - VLAN id. - * Output: - * pIndex - Member configuration index - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_VLAN_VID - Invalid VLAN ID. - * RT_ERR_TBL_FULL - Member Configuration table full - * Note: - * - */ -rtk_api_ret_t rtk_svlan_checkAndCreateMbr(rtk_vlan_t vid, rtk_uint32 *pIndex) -{ - rtk_api_ret_t retVal; - rtk_uint32 svidx; - rtk_uint32 empty_idx = 0xFFFF; - rtl8367c_svlan_memconf_t svlan_cfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~4095 */ - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - /* Null pointer check */ - if(NULL == pIndex) - return RT_ERR_NULL_POINTER; - - /* Search exist entry */ - for (svidx = 0; svidx <= RTL8367C_SVIDXMAX; svidx++) - { - if(svlan_mbrCfgUsage[svidx] == TRUE) - { - if(svlan_mbrCfgVid[svidx] == vid) - { - /* Found! return index */ - *pIndex = svidx; - return RT_ERR_OK; - } - } - else if(empty_idx == 0xFFFF) - { - empty_idx = svidx; - } - - } - - if(empty_idx == 0xFFFF) - { - /* No empty index */ - return RT_ERR_TBL_FULL; - } - - svlan_mbrCfgUsage[empty_idx] = TRUE; - svlan_mbrCfgVid[empty_idx] = vid; - - memset(&svlan_cfg, 0, sizeof(rtl8367c_svlan_memconf_t)); - - svlan_cfg.vs_svid = vid; - /*for create check*/ - if(vid == 0) - { - svlan_cfg.vs_efid = 1; - } - - if((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlan_cfg)) != RT_ERR_OK) - return retVal; - - *pIndex = empty_idx; - return RT_ERR_OK; -} - |