diff options
Diffstat (limited to 'target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c')
| -rw-r--r-- | target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c | 792 |
1 files changed, 0 insertions, 792 deletions
diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c deleted file mode 100644 index c00c331d8a..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/led.c +++ /dev/null @@ -1,792 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 76306 $ - * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in LED module. - * - */ - -#include <rtk_switch.h> -#include <rtk_error.h> -#include <led.h> -#include <string.h> - -#include <rtl8367c_asicdrv.h> -#include <rtl8367c_asicdrv_led.h> - - -/* Function Name: - * rtk_led_enable_set - * Description: - * Set Led enable congiuration - * Input: - * group - LED group id. - * pPortmask - LED enable port mask. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_MASK - Error portmask - * Note: - * The API can be used to enable LED per port per group. - */ -rtk_api_ret_t rtk_led_enable_set(rtk_led_group_t group, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - rtk_port_t port; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - RTK_CHK_PORTMASK_VALID(pPortmask); - - RTK_PORTMASK_SCAN((*pPortmask), port) - { - if(rtk_switch_isCPUPort(port) == RT_ERR_OK) - return RT_ERR_PORT_MASK; - } - - if((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLedGroupEnable(group, pmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_enable_get - * Description: - * Get Led enable congiuration - * Input: - * group - LED group id. - * Output: - * pPortmask - LED enable port mask. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can be used to get LED enable status. - */ -rtk_api_ret_t rtk_led_enable_get(rtk_led_group_t group, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_getAsicLedGroupEnable(group, &pmask)) != RT_ERR_OK) - return retVal; - - if((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_led_operation_set - * Description: - * Set Led operation mode - * Input: - * mode - LED operation mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set Led operation mode. - * The modes that can be set are as following: - * - LED_OP_SCAN, - * - LED_OP_PARALLEL, - * - LED_OP_SERIAL, - */ -rtk_api_ret_t rtk_led_operation_set(rtk_led_operation_t mode) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ( mode >= LED_OP_END) - return RT_ERR_INPUT; - - switch (mode) - { - case LED_OP_PARALLEL: - regData = LEDOP_PARALLEL; - break; - case LED_OP_SERIAL: - regData = LEDOP_SERIAL; - break; - default: - return RT_ERR_CHIP_NOT_SUPPORTED; - break; - } - - if ((retVal = rtl8367c_setAsicLedOperationMode(regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_operation_get - * Description: - * Get Led operation mode - * Input: - * None - * Output: - * pMode - Support LED operation mode. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get Led operation mode. - * The modes that can be set are as following: - * - LED_OP_SCAN, - * - LED_OP_PARALLEL, - * - LED_OP_SERIAL, - */ -rtk_api_ret_t rtk_led_operation_get(rtk_led_operation_t *pMode) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMode) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedOperationMode(®Data)) != RT_ERR_OK) - return retVal; - - if (regData == LEDOP_SERIAL) - *pMode = LED_OP_SERIAL; - else if (regData ==LEDOP_PARALLEL) - *pMode = LED_OP_PARALLEL; - else - return RT_ERR_FAILED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_modeForce_set - * Description: - * Set Led group to congiuration force mode - * Input: - * port - port ID - * group - Support LED group id. - * mode - Support LED force mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Error Port ID - * Note: - * The API can force to one force mode. - * The force modes that can be set are as following: - * - LED_FORCE_NORMAL, - * - LED_FORCE_BLINK, - * - LED_FORCE_OFF, - * - LED_FORCE_ON. - */ -rtk_api_ret_t rtk_led_modeForce_set(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t mode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /* No LED for CPU port */ - if(rtk_switch_isCPUPort(port) == RT_ERR_OK) - return RT_ERR_PORT_ID; - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - if (mode >= LED_FORCE_END) - return RT_ERR_NOT_ALLOWED; - - if ((retVal = rtl8367c_setAsicForceLed(rtk_switch_port_L2P_get(port), group, mode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_modeForce_get - * Description: - * Get Led group to congiuration force mode - * Input: - * port - port ID - * group - Support LED group id. - * pMode - Support LED force mode. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Error Port ID - * Note: - * The API can get forced Led group mode. - * The force modes that can be set are as following: - * - LED_FORCE_NORMAL, - * - LED_FORCE_BLINK, - * - LED_FORCE_OFF, - * - LED_FORCE_ON. - */ -rtk_api_ret_t rtk_led_modeForce_get(rtk_port_t port, rtk_led_group_t group, rtk_led_force_mode_t *pMode) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check Port Valid */ - RTK_CHK_PORT_VALID(port); - - /* No LED for CPU port */ - if(rtk_switch_isCPUPort(port) == RT_ERR_OK) - return RT_ERR_PORT_ID; - - if (group >= LED_GROUP_END) - return RT_ERR_INPUT; - - if (NULL == pMode) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicForceLed(rtk_switch_port_L2P_get(port), group, pMode)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_blinkRate_set - * Description: - * Set LED blinking rate - * Input: - * blinkRate - blinking rate. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * ASIC support 6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms. - */ -rtk_api_ret_t rtk_led_blinkRate_set(rtk_led_blink_rate_t blinkRate) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (blinkRate >= LED_BLINKRATE_END) - return RT_ERR_FAILED; - - if ((retVal = rtl8367c_setAsicLedBlinkRate(blinkRate)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_blinkRate_get - * Description: - * Get LED blinking rate at mode 0 to mode 3 - * Input: - * None - * Output: - * pBlinkRate - blinking rate. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * There are 6 types of LED blinking rates at 43ms, 84ms, 120ms, 170ms, 340ms and 670ms. - */ -rtk_api_ret_t rtk_led_blinkRate_get(rtk_led_blink_rate_t *pBlinkRate) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pBlinkRate) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedBlinkRate(pBlinkRate)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupConfig_set - * Description: - * Set per group Led to congiuration mode - * Input: - * group - LED group. - * config - LED configuration - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set LED indicated information configuration for each LED group with 1 to 1 led mapping to each port. - * - Definition LED Statuses Description - * - 0000 LED_Off LED pin Tri-State. - * - 0001 Dup/Col Collision, Full duplex Indicator. - * - 0010 Link/Act Link, Activity Indicator. - * - 0011 Spd1000 1000Mb/s Speed Indicator. - * - 0100 Spd100 100Mb/s Speed Indicator. - * - 0101 Spd10 10Mb/s Speed Indicator. - * - 0110 Spd1000/Act 1000Mb/s Speed/Activity Indicator. - * - 0111 Spd100/Act 100Mb/s Speed/Activity Indicator. - * - 1000 Spd10/Act 10Mb/s Speed/Activity Indicator. - * - 1001 Spd100 (10)/Act 10/100Mb/s Speed/Activity Indicator. - * - 1010 LoopDetect LoopDetect Indicator. - * - 1011 EEE EEE Indicator. - * - 1100 Link/Rx Link, Activity Indicator. - * - 1101 Link/Tx Link, Activity Indicator. - * - 1110 Master Link on Master Indicator. - * - 1111 Act Activity Indicator. Low for link established. - */ -rtk_api_ret_t rtk_led_groupConfig_set(rtk_led_group_t group, rtk_led_congig_t config) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if (LED_CONFIG_END <= config) - return RT_ERR_FAILED; - - if ((retVal = rtl8367c_setAsicLedIndicateInfoConfig(group, config)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupConfig_get - * Description: - * Get Led group congiuration mode - * Input: - * group - LED group. - * Output: - * pConfig - LED configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get LED indicated information configuration for each LED group. - */ -rtk_api_ret_t rtk_led_groupConfig_get(rtk_led_group_t group, rtk_led_congig_t *pConfig) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if(NULL == pConfig) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedIndicateInfoConfig(group, pConfig)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupAbility_set - * Description: - * Configure per group Led ability - * Input: - * group - LED group. - * pAbility - LED ability - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * None. - */ - -rtk_api_ret_t rtk_led_groupAbility_set(rtk_led_group_t group, rtk_led_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if(pAbility == NULL) - return RT_ERR_NULL_POINTER; - - if( (pAbility->link_10m >= RTK_ENABLE_END) || (pAbility->link_100m >= RTK_ENABLE_END)|| - (pAbility->link_500m >= RTK_ENABLE_END) || (pAbility->link_1000m >= RTK_ENABLE_END)|| - (pAbility->act_rx >= RTK_ENABLE_END) || (pAbility->act_tx >= RTK_ENABLE_END) ) - { - return RT_ERR_INPUT; - } - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, ®Data)) != RT_ERR_OK) - return retVal; - - if(pAbility->link_10m == ENABLED) - regData |= 0x0001; - else - regData &= ~0x0001; - - if(pAbility->link_100m == ENABLED) - regData |= 0x0002; - else - regData &= ~0x0002; - - if(pAbility->link_500m == ENABLED) - regData |= 0x0004; - else - regData &= ~0x0004; - - if(pAbility->link_1000m == ENABLED) - regData |= 0x0008; - else - regData &= ~0x0008; - - if(pAbility->act_rx == ENABLED) - regData |= 0x0010; - else - regData &= ~0x0010; - - if(pAbility->act_tx == ENABLED) - regData |= 0x0020; - else - regData &= ~0x0020; - - regData |= (0x0001 << 6); - - if ((retVal = rtl8367c_setAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, regData)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_groupAbility_get - * Description: - * Get per group Led ability - * Input: - * group - LED group. - * pAbility - LED ability - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * None. - */ - -rtk_api_ret_t rtk_led_groupAbility_get(rtk_led_group_t group, rtk_led_ability_t *pAbility) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (LED_GROUP_END <= group) - return RT_ERR_FAILED; - - if(pAbility == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicReg(RTL8367C_REG_LED0_DATA_CTRL + (rtk_uint32)group, ®Data)) != RT_ERR_OK) - return retVal; - - pAbility->link_10m = (regData & 0x0001) ? ENABLED : DISABLED; - pAbility->link_100m = (regData & 0x0002) ? ENABLED : DISABLED; - pAbility->link_500m = (regData & 0x0004) ? ENABLED : DISABLED; - pAbility->link_1000m = (regData & 0x0008) ? ENABLED : DISABLED; - pAbility->act_rx = (regData & 0x0010) ? ENABLED : DISABLED; - pAbility->act_tx = (regData & 0x0020) ? ENABLED : DISABLED; - - return RT_ERR_OK; -} - - -/* Function Name: - * rtk_led_serialMode_set - * Description: - * Set Led serial mode active congiuration - * Input: - * active - LED group. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can set LED serial mode active congiuration. - */ -rtk_api_ret_t rtk_led_serialMode_set(rtk_led_active_t active) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if ( active >= LED_ACTIVE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicLedSerialModeConfig(active,1))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_serialMode_get - * Description: - * Get Led group congiuration mode - * Input: - * group - LED group. - * Output: - * pConfig - LED configuration. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get LED serial mode active configuration. - */ -rtk_api_ret_t rtk_led_serialMode_get(rtk_led_active_t *pActive) -{ - rtk_api_ret_t retVal; - rtk_uint32 regData; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pActive) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedSerialModeConfig(pActive,®Data))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_OutputEnable_set - * Description: - * This API set LED I/O state. - * Input: - * enabled - LED I/O state - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set LED I/O state. - */ -rtk_api_ret_t rtk_led_OutputEnable_set(rtk_enable_t state) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (state >= RTK_ENABLE_END) - return RT_ERR_INPUT; - - if ((retVal = rtl8367c_setAsicLedOutputEnable(state))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_OutputEnable_get - * Description: - * This API get LED I/O state. - * Input: - * None. - * Output: - * pEnabled - LED I/O state - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * This API set current LED I/O state. - */ -rtk_api_ret_t rtk_led_OutputEnable_get(rtk_enable_t *pState) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pState == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedOutputEnable(pState))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; - -} - -/* Function Name: - * rtk_led_serialModePortmask_set - * Description: - * This API configure Serial LED output Group and portmask - * Input: - * output - output group - * pPortmask - output portmask - * Output: - * None. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * None. - */ -rtk_api_ret_t rtk_led_serialModePortmask_set(rtk_led_serialOutput_t output, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(output >= SERIAL_LED_END) - return RT_ERR_INPUT; - - if(pPortmask == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtk_switch_portmask_L2P_get(pPortmask, &pmask)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsicLedSerialOutput((rtk_uint32)output, pmask))!=RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_led_serialModePortmask_get - * Description: - * This API get Serial LED output Group and portmask - * Input: - * None. - * Output: - * pOutput - output group - * pPortmask - output portmask - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Error parameter - * Note: - * None. - */ -rtk_api_ret_t rtk_led_serialModePortmask_get(rtk_led_serialOutput_t *pOutput, rtk_portmask_t *pPortmask) -{ - rtk_api_ret_t retVal; - rtk_uint32 pmask; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(pOutput == NULL) - return RT_ERR_NULL_POINTER; - - if(pPortmask == NULL) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicLedSerialOutput((rtk_uint32 *)pOutput, &pmask))!=RT_ERR_OK) - return retVal; - - if((retVal = rtk_switch_portmask_P2L_get(pmask, pPortmask)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - |