aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h')
-rw-r--r--target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h1181
1 files changed, 0 insertions, 1181 deletions
diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h
deleted file mode 100644
index e0ccdbe3d7..0000000000
--- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/l2.h
+++ /dev/null
@@ -1,1181 +0,0 @@
-/*
- * Copyright (C) 2013 Realtek Semiconductor Corp.
- * All Rights Reserved.
- *
- * Unless you and Realtek execute a separate written software license
- * agreement governing use of this software, this software is licensed
- * to you under the terms of the GNU General Public License version 2,
- * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
- *
- * Purpose : RTL8367/RTL8367C switch high-level API
- *
- * Feature : The file includes L2 module high-layer API defination
- *
- */
-
-#ifndef __RTK_API_L2_H__
-#define __RTK_API_L2_H__
-
-
-/*
- * Data Type Declaration
- */
-#define RTK_MAX_NUM_OF_LEARN_LIMIT (rtk_switch_maxLutAddrNumber_get())
-
-#define RTK_MAC_ADDR_LEN 6
-#define RTK_MAX_LUT_ADDRESS (RTK_MAX_NUM_OF_LEARN_LIMIT)
-#define RTK_MAX_LUT_ADDR_ID (RTK_MAX_LUT_ADDRESS - 1)
-
-typedef rtk_uint32 rtk_l2_age_time_t;
-
-typedef enum rtk_l2_flood_type_e
-{
- FLOOD_UNKNOWNDA = 0,
- FLOOD_UNKNOWNMC,
- FLOOD_BC,
- FLOOD_END
-} rtk_l2_flood_type_t;
-
-typedef rtk_uint32 rtk_l2_flushItem_t;
-
-typedef enum rtk_l2_flushType_e
-{
- FLUSH_TYPE_BY_PORT = 0, /* physical port */
- FLUSH_TYPE_BY_PORT_VID, /* physical port + VID */
- FLUSH_TYPE_BY_PORT_FID, /* physical port + FID */
- FLUSH_TYPE_END
-} rtk_l2_flushType_t;
-
-typedef struct rtk_l2_flushCfg_s
-{
- rtk_enable_t flushByVid;
- rtk_vlan_t vid;
- rtk_enable_t flushByFid;
- rtk_uint32 fid;
- rtk_enable_t flushByPort;
- rtk_port_t port;
- rtk_enable_t flushByMac;
- rtk_mac_t ucastAddr;
- rtk_enable_t flushStaticAddr;
- rtk_enable_t flushAddrOnAllPorts; /* this is used when flushByVid */
-} rtk_l2_flushCfg_t;
-
-typedef enum rtk_l2_read_method_e{
-
- READMETHOD_MAC = 0,
- READMETHOD_ADDRESS,
- READMETHOD_NEXT_ADDRESS,
- READMETHOD_NEXT_L2UC,
- READMETHOD_NEXT_L2MC,
- READMETHOD_NEXT_L3MC,
- READMETHOD_NEXT_L2L3MC,
- READMETHOD_NEXT_L2UCSPA,
- READMETHOD_END
-}rtk_l2_read_method_t;
-
-/* l2 limit learning count action */
-typedef enum rtk_l2_limitLearnCntAction_e
-{
- LIMIT_LEARN_CNT_ACTION_DROP = 0,
- LIMIT_LEARN_CNT_ACTION_FORWARD,
- LIMIT_LEARN_CNT_ACTION_TO_CPU,
- LIMIT_LEARN_CNT_ACTION_END
-} rtk_l2_limitLearnCntAction_t;
-
-typedef enum rtk_l2_ipmc_lookup_type_e
-{
- LOOKUP_MAC = 0,
- LOOKUP_IP,
- LOOKUP_IP_VID,
- LOOKUP_END
-} rtk_l2_ipmc_lookup_type_t;
-
-/* l2 address table - unicast data structure */
-typedef struct rtk_l2_ucastAddr_s
-{
- rtk_mac_t mac;
- rtk_uint32 ivl;
- rtk_uint32 cvid;
- rtk_uint32 fid;
- rtk_uint32 efid;
- rtk_uint32 port;
- rtk_uint32 sa_block;
- rtk_uint32 da_block;
- rtk_uint32 auth;
- rtk_uint32 is_static;
- rtk_uint32 priority;
- rtk_uint32 sa_pri_en;
- rtk_uint32 fwd_pri_en;
- rtk_uint32 address;
-}rtk_l2_ucastAddr_t;
-
-/* l2 address table - multicast data structure */
-typedef struct rtk_l2_mcastAddr_s
-{
- rtk_uint32 vid;
- rtk_mac_t mac;
- rtk_uint32 fid;
- rtk_portmask_t portmask;
- rtk_uint32 ivl;
- rtk_uint32 priority;
- rtk_uint32 fwd_pri_en;
- rtk_uint32 igmp_asic;
- rtk_uint32 igmp_index;
- rtk_uint32 address;
-}rtk_l2_mcastAddr_t;
-
-/* l2 address table - ip multicast data structure */
-typedef struct rtk_l2_ipMcastAddr_s
-{
- ipaddr_t dip;
- ipaddr_t sip;
- rtk_portmask_t portmask;
- rtk_uint32 priority;
- rtk_uint32 fwd_pri_en;
- rtk_uint32 igmp_asic;
- rtk_uint32 igmp_index;
- rtk_uint32 address;
-}rtk_l2_ipMcastAddr_t;
-
-/* l2 address table - ip VID multicast data structure */
-typedef struct rtk_l2_ipVidMcastAddr_s
-{
- ipaddr_t dip;
- ipaddr_t sip;
- rtk_uint32 vid;
- rtk_portmask_t portmask;
- rtk_uint32 address;
-}rtk_l2_ipVidMcastAddr_t;
-
-typedef struct rtk_l2_addr_table_s
-{
- rtk_uint32 index;
- ipaddr_t sip;
- ipaddr_t dip;
- rtk_mac_t mac;
- rtk_uint32 sa_block;
- rtk_uint32 auth;
- rtk_portmask_t portmask;
- rtk_uint32 age;
- rtk_uint32 ivl;
- rtk_uint32 cvid;
- rtk_uint32 fid;
- rtk_uint32 is_ipmul;
- rtk_uint32 is_static;
- rtk_uint32 is_ipvidmul;
- rtk_uint32 l3_vid;
-}rtk_l2_addr_table_t;
-
-typedef enum rtk_l2_clearStatus_e
-{
- L2_CLEAR_STATE_FINISH = 0,
- L2_CLEAR_STATE_BUSY,
- L2_CLEAR_STATE_END
-}rtk_l2_clearStatus_t;
-
-/* Function Name:
- * rtk_l2_init
- * Description:
- * Initialize l2 module of the specified device.
- * Input:
- * None
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * Note:
- * Initialize l2 module before calling any l2 APIs.
- */
-extern rtk_api_ret_t rtk_l2_init(void);
-
-/* Function Name:
- * rtk_l2_addr_add
- * Description:
- * Add LUT unicast entry.
- * Input:
- * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT.
- * pL2_data - Unicast entry parameter
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_MAC - Invalid MAC address.
- * RT_ERR_L2_FID - Invalid FID .
- * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * If the unicast mac address already existed in LUT, it will udpate the status of the entry.
- * Otherwise, it will find an empty or asic auto learned entry to write. If all the entries
- * with the same hash value can't be replaced, ASIC will return a RT_ERR_L2_INDEXTBL_FULL error.
- */
-extern rtk_api_ret_t rtk_l2_addr_add(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data);
-
-/* Function Name:
- * rtk_l2_addr_get
- * Description:
- * Get LUT unicast entry.
- * Input:
- * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT.
- * Output:
- * pL2_data - Unicast entry parameter
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_MAC - Invalid MAC address.
- * RT_ERR_L2_FID - Invalid FID .
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * If the unicast mac address existed in LUT, it will return the port and fid where
- * the mac is learned. Otherwise, it will return a RT_ERR_L2_ENTRY_NOTFOUND error.
- */
-extern rtk_api_ret_t rtk_l2_addr_get(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data);
-
-/* Function Name:
- * rtk_l2_addr_next_get
- * Description:
- * Get Next LUT unicast entry.
- * Input:
- * read_method - The reading method.
- * port - The port number if the read_metohd is READMETHOD_NEXT_L2UCSPA
- * pAddress - The Address ID
- * Output:
- * pL2_data - Unicast entry parameter
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_MAC - Invalid MAC address.
- * RT_ERR_L2_FID - Invalid FID .
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * Get the next unicast entry after the current entry pointed by pAddress.
- * The address of next entry is returned by pAddress. User can use (address + 1)
- * as pAddress to call this API again for dumping all entries is LUT.
- */
-extern rtk_api_ret_t rtk_l2_addr_next_get(rtk_l2_read_method_t read_method, rtk_port_t port, rtk_uint32 *pAddress, rtk_l2_ucastAddr_t *pL2_data);
-
-/* Function Name:
- * rtk_l2_addr_del
- * Description:
- * Delete LUT unicast entry.
- * Input:
- * pMac - 6 bytes unicast(I/G bit is 0) mac address to be written into LUT.
- * fid - Filtering database
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_MAC - Invalid MAC address.
- * RT_ERR_L2_FID - Invalid FID .
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * If the mac has existed in the LUT, it will be deleted. Otherwise, it will return RT_ERR_L2_ENTRY_NOTFOUND.
- */
-extern rtk_api_ret_t rtk_l2_addr_del(rtk_mac_t *pMac, rtk_l2_ucastAddr_t *pL2_data);
-
-/* Function Name:
- * rtk_l2_mcastAddr_add
- * Description:
- * Add LUT multicast entry.
- * Input:
- * pMcastAddr - L2 multicast entry structure
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_MAC - Invalid MAC address.
- * RT_ERR_L2_FID - Invalid FID .
- * RT_ERR_L2_VID - Invalid VID .
- * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries.
- * RT_ERR_PORT_MASK - Invalid portmask.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * If the multicast mac address already existed in the LUT, it will udpate the
- * port mask of the entry. Otherwise, it will find an empty or asic auto learned
- * entry to write. If all the entries with the same hash value can't be replaced,
- * ASIC will return a RT_ERR_L2_INDEXTBL_FULL error.
- */
-extern rtk_api_ret_t rtk_l2_mcastAddr_add(rtk_l2_mcastAddr_t *pMcastAddr);
-
-/* Function Name:
- * rtk_l2_mcastAddr_get
- * Description:
- * Get LUT multicast entry.
- * Input:
- * pMcastAddr - L2 multicast entry structure
- * Output:
- * pMcastAddr - L2 multicast entry structure
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_MAC - Invalid MAC address.
- * RT_ERR_L2_FID - Invalid FID .
- * RT_ERR_L2_VID - Invalid VID .
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * If the multicast mac address existed in the LUT, it will return the port where
- * the mac is learned. Otherwise, it will return a RT_ERR_L2_ENTRY_NOTFOUND error.
- */
-extern rtk_api_ret_t rtk_l2_mcastAddr_get(rtk_l2_mcastAddr_t *pMcastAddr);
-
-/* Function Name:
- * rtk_l2_mcastAddr_next_get
- * Description:
- * Get Next L2 Multicast entry.
- * Input:
- * pAddress - The Address ID
- * Output:
- * pMcastAddr - L2 multicast entry structure
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * Get the next L2 multicast entry after the current entry pointed by pAddress.
- * The address of next entry is returned by pAddress. User can use (address + 1)
- * as pAddress to call this API again for dumping all multicast entries is LUT.
- */
-extern rtk_api_ret_t rtk_l2_mcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_mcastAddr_t *pMcastAddr);
-
-/* Function Name:
- * rtk_l2_mcastAddr_del
- * Description:
- * Delete LUT multicast entry.
- * Input:
- * pMcastAddr - L2 multicast entry structure
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_MAC - Invalid MAC address.
- * RT_ERR_L2_FID - Invalid FID .
- * RT_ERR_L2_VID - Invalid VID .
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * If the mac has existed in the LUT, it will be deleted. Otherwise, it will return RT_ERR_L2_ENTRY_NOTFOUND.
- */
-extern rtk_api_ret_t rtk_l2_mcastAddr_del(rtk_l2_mcastAddr_t *pMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipMcastAddr_add
- * Description:
- * Add Lut IP multicast entry
- * Input:
- * pIpMcastAddr - IP Multicast entry
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries.
- * RT_ERR_PORT_MASK - Invalid portmask.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * System supports L2 entry with IP multicast DIP/SIP to forward IP multicasting frame as user
- * desired. If this function is enabled, then system will be looked up L2 IP multicast entry to
- * forward IP multicast frame directly without flooding.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastAddr_add(rtk_l2_ipMcastAddr_t *pIpMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipMcastAddr_get
- * Description:
- * Get LUT IP multicast entry.
- * Input:
- * pIpMcastAddr - IP Multicast entry
- * Output:
- * pIpMcastAddr - IP Multicast entry
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * The API can get Lut table of IP multicast entry.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastAddr_get(rtk_l2_ipMcastAddr_t *pIpMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipMcastAddr_next_get
- * Description:
- * Get Next IP Multicast entry.
- * Input:
- * pAddress - The Address ID
- * Output:
- * pIpMcastAddr - IP Multicast entry
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * Get the next IP multicast entry after the current entry pointed by pAddress.
- * The address of next entry is returned by pAddress. User can use (address + 1)
- * as pAddress to call this API again for dumping all IP multicast entries is LUT.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_ipMcastAddr_t *pIpMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipMcastAddr_del
- * Description:
- * Delete a ip multicast address entry from the specified device.
- * Input:
- * pIpMcastAddr - IP Multicast entry
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * The API can delete a IP multicast address entry from the specified device.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastAddr_del(rtk_l2_ipMcastAddr_t *pIpMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipVidMcastAddr_add
- * Description:
- * Add Lut IP multicast+VID entry
- * Input:
- * pIpVidMcastAddr - IP & VID multicast Entry
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_L2_INDEXTBL_FULL - hashed index is full of entries.
- * RT_ERR_PORT_MASK - Invalid portmask.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_add(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipVidMcastAddr_get
- * Description:
- * Get LUT IP multicast+VID entry.
- * Input:
- * pIpVidMcastAddr - IP & VID multicast Entry
- * Output:
- * pIpVidMcastAddr - IP & VID multicast Entry
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_get(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipVidMcastAddr_next_get
- * Description:
- * Get Next IP Multicast+VID entry.
- * Input:
- * pAddress - The Address ID
- * Output:
- * pIpVidMcastAddr - IP & VID multicast Entry
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * Get the next IP multicast entry after the current entry pointed by pAddress.
- * The address of next entry is returned by pAddress. User can use (address + 1)
- * as pAddress to call this API again for dumping all IP multicast entries is LUT.
- */
-extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_next_get(rtk_uint32 *pAddress, rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr);
-
-/* Function Name:
- * rtk_l2_ipVidMcastAddr_del
- * Description:
- * Delete a ip multicast+VID address entry from the specified device.
- * Input:
- * pIpVidMcastAddr - IP & VID multicast Entry
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_ENTRY_NOTFOUND - No such LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_ipVidMcastAddr_del(rtk_l2_ipVidMcastAddr_t *pIpVidMcastAddr);
-
-/* Function Name:
- * rtk_l2_ucastAddr_flush
- * Description:
- * Flush L2 mac address by type in the specified device (both dynamic and static).
- * Input:
- * pConfig - flush configuration
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_VLAN_VID - Invalid VID parameter.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * flushByVid - 1: Flush by VID, 0: Don't flush by VID
- * vid - VID (0 ~ 4095)
- * flushByFid - 1: Flush by FID, 0: Don't flush by FID
- * fid - FID (0 ~ 15)
- * flushByPort - 1: Flush by Port, 0: Don't flush by Port
- * port - Port ID
- * flushByMac - Not Supported
- * ucastAddr - Not Supported
- * flushStaticAddr - 1: Flush both Static and Dynamic entries, 0: Flush only Dynamic entries
- * flushAddrOnAllPorts - 1: Flush VID-matched entries at all ports, 0: Flush VID-matched entries per port.
- */
-extern rtk_api_ret_t rtk_l2_ucastAddr_flush(rtk_l2_flushCfg_t *pConfig);
-
-/* Function Name:
- * rtk_l2_table_clear
- * Description:
- * Flush all static & dynamic entries in LUT.
- * Input:
- * None
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_table_clear(void);
-
-/* Function Name:
- * rtk_l2_table_clearStatus_get
- * Description:
- * Get table clear status
- * Input:
- * None
- * Output:
- * pStatus - Clear status, 1:Busy, 0:finish
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_table_clearStatus_get(rtk_l2_clearStatus_t *pStatus);
-
-/* Function Name:
- * rtk_l2_flushLinkDownPortAddrEnable_set
- * Description:
- * Set HW flush linkdown port mac configuration of the specified device.
- * Input:
- * port - Port id.
- * enable - link down flush status
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_ENABLE - Invalid enable input.
- * Note:
- * The status of flush linkdown port address is as following:
- * - DISABLED
- * - ENABLED
- */
-extern rtk_api_ret_t rtk_l2_flushLinkDownPortAddrEnable_set(rtk_port_t port, rtk_enable_t enable);
-
-/* Function Name:
- * rtk_l2_flushLinkDownPortAddrEnable_get
- * Description:
- * Get HW flush linkdown port mac configuration of the specified device.
- * Input:
- * port - Port id.
- * Output:
- * pEnable - link down flush status
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * The status of flush linkdown port address is as following:
- * - DISABLED
- * - ENABLED
- */
-extern rtk_api_ret_t rtk_l2_flushLinkDownPortAddrEnable_get(rtk_port_t port, rtk_enable_t *pEnable);
-
-/* Function Name:
- * rtk_l2_agingEnable_set
- * Description:
- * Set L2 LUT aging status per port setting.
- * Input:
- * port - Port id.
- * enable - Aging status
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_ENABLE - Invalid enable input.
- * Note:
- * This API can be used to set L2 LUT aging status per port.
- */
-extern rtk_api_ret_t rtk_l2_agingEnable_set(rtk_port_t port, rtk_enable_t enable);
-
-/* Function Name:
- * rtk_l2_agingEnable_get
- * Description:
- * Get L2 LUT aging status per port setting.
- * Input:
- * port - Port id.
- * Output:
- * pEnable - Aging status
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * This API can be used to get L2 LUT aging function per port.
- */
-extern rtk_api_ret_t rtk_l2_agingEnable_get(rtk_port_t port, rtk_enable_t *pEnable);
-
-/* Function Name:
- * rtk_l2_limitLearningCnt_set
- * Description:
- * Set per-Port auto learning limit number
- * Input:
- * port - Port id.
- * mac_cnt - Auto learning entries limit number
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number
- * Note:
- * The API can set per-port ASIC auto learning limit number from 0(disable learning)
- * to 8k.
- */
-extern rtk_api_ret_t rtk_l2_limitLearningCnt_set(rtk_port_t port, rtk_mac_cnt_t mac_cnt);
-
-/* Function Name:
- * rtk_l2_limitLearningCnt_get
- * Description:
- * Get per-Port auto learning limit number
- * Input:
- * port - Port id.
- * Output:
- * pMac_cnt - Auto learning entries limit number
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * The API can get per-port ASIC auto learning limit number.
- */
-extern rtk_api_ret_t rtk_l2_limitLearningCnt_get(rtk_port_t port, rtk_mac_cnt_t *pMac_cnt);
-
-/* Function Name:
- * rtk_l2_limitSystemLearningCnt_set
- * Description:
- * Set System auto learning limit number
- * Input:
- * mac_cnt - Auto learning entries limit number
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_LIMITED_L2ENTRY_NUM - Invalid auto learning limit number
- * Note:
- * The API can set system ASIC auto learning limit number from 0(disable learning)
- * to 2112.
- */
-extern rtk_api_ret_t rtk_l2_limitSystemLearningCnt_set(rtk_mac_cnt_t mac_cnt);
-
-/* Function Name:
- * rtk_l2_limitSystemLearningCnt_get
- * Description:
- * Get System auto learning limit number
- * Input:
- * None
- * Output:
- * pMac_cnt - Auto learning entries limit number
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * The API can get system ASIC auto learning limit number.
- */
-extern rtk_api_ret_t rtk_l2_limitSystemLearningCnt_get(rtk_mac_cnt_t *pMac_cnt);
-
-/* Function Name:
- * rtk_l2_limitLearningCntAction_set
- * Description:
- * Configure auto learn over limit number action.
- * Input:
- * port - Port id.
- * action - Auto learning entries limit number
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_NOT_ALLOWED - Invalid learn over action
- * Note:
- * The API can set SA unknown packet action while auto learn limit number is over
- * The action symbol as following:
- * - LIMIT_LEARN_CNT_ACTION_DROP,
- * - LIMIT_LEARN_CNT_ACTION_FORWARD,
- * - LIMIT_LEARN_CNT_ACTION_TO_CPU,
- */
-extern rtk_api_ret_t rtk_l2_limitLearningCntAction_set(rtk_port_t port, rtk_l2_limitLearnCntAction_t action);
-
-/* Function Name:
- * rtk_l2_limitLearningCntAction_get
- * Description:
- * Get auto learn over limit number action.
- * Input:
- * port - Port id.
- * Output:
- * pAction - Learn over action
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * The API can get SA unknown packet action while auto learn limit number is over
- * The action symbol as following:
- * - LIMIT_LEARN_CNT_ACTION_DROP,
- * - LIMIT_LEARN_CNT_ACTION_FORWARD,
- * - LIMIT_LEARN_CNT_ACTION_TO_CPU,
- */
-extern rtk_api_ret_t rtk_l2_limitLearningCntAction_get(rtk_port_t port, rtk_l2_limitLearnCntAction_t *pAction);
-
-/* Function Name:
- * rtk_l2_limitSystemLearningCntAction_set
- * Description:
- * Configure system auto learn over limit number action.
- * Input:
- * port - Port id.
- * action - Auto learning entries limit number
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_NOT_ALLOWED - Invalid learn over action
- * Note:
- * The API can set SA unknown packet action while auto learn limit number is over
- * The action symbol as following:
- * - LIMIT_LEARN_CNT_ACTION_DROP,
- * - LIMIT_LEARN_CNT_ACTION_FORWARD,
- * - LIMIT_LEARN_CNT_ACTION_TO_CPU,
- */
-extern rtk_api_ret_t rtk_l2_limitSystemLearningCntAction_set(rtk_l2_limitLearnCntAction_t action);
-
-/* Function Name:
- * rtk_l2_limitSystemLearningCntAction_get
- * Description:
- * Get system auto learn over limit number action.
- * Input:
- * None.
- * Output:
- * pAction - Learn over action
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * The API can get SA unknown packet action while auto learn limit number is over
- * The action symbol as following:
- * - LIMIT_LEARN_CNT_ACTION_DROP,
- * - LIMIT_LEARN_CNT_ACTION_FORWARD,
- * - LIMIT_LEARN_CNT_ACTION_TO_CPU,
- */
-extern rtk_api_ret_t rtk_l2_limitSystemLearningCntAction_get(rtk_l2_limitLearnCntAction_t *pAction);
-
-/* Function Name:
- * rtk_l2_limitSystemLearningCntPortMask_set
- * Description:
- * Configure system auto learn portmask
- * Input:
- * pPortmask - Port Mask
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_MASK - Invalid port mask.
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_limitSystemLearningCntPortMask_set(rtk_portmask_t *pPortmask);
-
-/* Function Name:
- * rtk_l2_limitSystemLearningCntPortMask_get
- * Description:
- * get system auto learn portmask
- * Input:
- * None
- * Output:
- * pPortmask - Port Mask
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_NULL_POINTER - Null pointer.
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_limitSystemLearningCntPortMask_get(rtk_portmask_t *pPortmask);
-
-/* Function Name:
- * rtk_l2_learningCnt_get
- * Description:
- * Get per-Port current auto learning number
- * Input:
- * port - Port id.
- * Output:
- * pMac_cnt - ASIC auto learning entries number
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * The API can get per-port ASIC auto learning number
- */
-extern rtk_api_ret_t rtk_l2_learningCnt_get(rtk_port_t port, rtk_mac_cnt_t *pMac_cnt);
-
-/* Function Name:
- * rtk_l2_floodPortMask_set
- * Description:
- * Set flooding portmask
- * Input:
- * type - flooding type.
- * pFlood_portmask - flooding porkmask
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_MASK - Invalid portmask.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * This API can set the flooding mask.
- * The flooding type is as following:
- * - FLOOD_UNKNOWNDA
- * - FLOOD_UNKNOWNMC
- * - FLOOD_BC
- */
-extern rtk_api_ret_t rtk_l2_floodPortMask_set(rtk_l2_flood_type_t floood_type, rtk_portmask_t *pFlood_portmask);
-
-/* Function Name:
- * rtk_l2_floodPortMask_get
- * Description:
- * Get flooding portmask
- * Input:
- * type - flooding type.
- * Output:
- * pFlood_portmask - flooding porkmask
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * This API can get the flooding mask.
- * The flooding type is as following:
- * - FLOOD_UNKNOWNDA
- * - FLOOD_UNKNOWNMC
- * - FLOOD_BC
- */
-extern rtk_api_ret_t rtk_l2_floodPortMask_get(rtk_l2_flood_type_t floood_type, rtk_portmask_t *pFlood_portmask);
-
-/* Function Name:
- * rtk_l2_localPktPermit_set
- * Description:
- * Set permittion of frames if source port and destination port are the same.
- * Input:
- * port - Port id.
- * permit - permittion status
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * RT_ERR_ENABLE - Invalid permit value.
- * Note:
- * This API is setted to permit frame if its source port is equal to destination port.
- */
-extern rtk_api_ret_t rtk_l2_localPktPermit_set(rtk_port_t port, rtk_enable_t permit);
-
-/* Function Name:
- * rtk_l2_localPktPermit_get
- * Description:
- * Get permittion of frames if source port and destination port are the same.
- * Input:
- * port - Port id.
- * Output:
- * pPermit - permittion status
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * This API is to get permittion status for frames if its source port is equal to destination port.
- */
-extern rtk_api_ret_t rtk_l2_localPktPermit_get(rtk_port_t port, rtk_enable_t *pPermit);
-
-/* Function Name:
- * rtk_l2_aging_set
- * Description:
- * Set LUT agging out speed
- * Input:
- * aging_time - Agging out time.
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_OUT_OF_RANGE - input out of range.
- * Note:
- * The API can set LUT agging out period for each entry and the range is from 14s to 800s.
- */
-extern rtk_api_ret_t rtk_l2_aging_set(rtk_l2_age_time_t aging_time);
-
-/* Function Name:
- * rtk_l2_aging_get
- * Description:
- * Get LUT agging out time
- * Input:
- * None
- * Output:
- * pEnable - Aging status
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_PORT_ID - Invalid port number.
- * Note:
- * The API can get LUT agging out period for each entry.
- */
-extern rtk_api_ret_t rtk_l2_aging_get(rtk_l2_age_time_t *pAging_time);
-
-/* Function Name:
- * rtk_l2_ipMcastAddrLookup_set
- * Description:
- * Set Lut IP multicast lookup function
- * Input:
- * type - Lookup type for IPMC packet.
- * Output:
- * None.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * Note:
- * This API can work with rtk_l2_ipMcastAddrLookupException_add.
- * If users set the lookup type to DIP, the group in exception table
- * will be lookup by DIP+SIP
- * If users set the lookup type to DIP+SIP, the group in exception table
- * will be lookup by only DIP
- */
-extern rtk_api_ret_t rtk_l2_ipMcastAddrLookup_set(rtk_l2_ipmc_lookup_type_t type);
-
-/* Function Name:
- * rtk_l2_ipMcastAddrLookup_get
- * Description:
- * Get Lut IP multicast lookup function
- * Input:
- * None.
- * Output:
- * pType - Lookup type for IPMC packet.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * Note:
- * None.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastAddrLookup_get(rtk_l2_ipmc_lookup_type_t *pType);
-
-/* Function Name:
- * rtk_l2_ipMcastForwardRouterPort_set
- * Description:
- * Set IPMC packet forward to rounter port also or not
- * Input:
- * enabled - 1: Inlcude router port, 0, exclude router port
- * Output:
- * None.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_ipMcastForwardRouterPort_set(rtk_enable_t enabled);
-
-/* Function Name:
- * rtk_l2_ipMcastForwardRouterPort_get
- * Description:
- * Get IPMC packet forward to rounter port also or not
- * Input:
- * None.
- * Output:
- * pEnabled - 1: Inlcude router port, 0, exclude router port
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_NULL_POINTER - Null pointer
- * Note:
- *
- */
-extern rtk_api_ret_t rtk_l2_ipMcastForwardRouterPort_get(rtk_enable_t *pEnabled);
-
-/* Function Name:
- * rtk_l2_ipMcastGroupEntry_add
- * Description:
- * Add an IP Multicast entry to group table
- * Input:
- * ip_addr - IP address
- * vid - VLAN ID
- * pPortmask - portmask
- * Output:
- * None.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_TBL_FULL - Table Full
- * Note:
- * Add an entry to IP Multicast Group table.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastGroupEntry_add(ipaddr_t ip_addr, rtk_uint32 vid, rtk_portmask_t *pPortmask);
-
-/* Function Name:
- * rtk_l2_ipMcastGroupEntry_del
- * Description:
- * Delete an entry from IP Multicast group table
- * Input:
- * ip_addr - IP address
- * vid - VLAN ID
- * Output:
- * None.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_TBL_FULL - Table Full
- * Note:
- * Delete an entry from IP Multicast group table.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastGroupEntry_del(ipaddr_t ip_addr, rtk_uint32 vid);
-
-/* Function Name:
- * rtk_l2_ipMcastGroupEntry_get
- * Description:
- * get an entry from IP Multicast group table
- * Input:
- * ip_addr - IP address
- * vid - VLAN ID
- * Output:
- * pPortmask - member port mask
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_TBL_FULL - Table Full
- * Note:
- * Delete an entry from IP Multicast group table.
- */
-extern rtk_api_ret_t rtk_l2_ipMcastGroupEntry_get(ipaddr_t ip_addr, rtk_uint32 vid, rtk_portmask_t *pPortmask);
-
-/* Function Name:
- * rtk_l2_entry_get
- * Description:
- * Get LUT unicast entry.
- * Input:
- * pL2_entry - Index field in the structure.
- * Output:
- * pL2_entry - other fields such as MAC, port, age...
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_L2_EMPTY_ENTRY - Empty LUT entry.
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * This API is used to get address by index from 0~2111.
- */
-extern rtk_api_ret_t rtk_l2_entry_get(rtk_l2_addr_table_t *pL2_entry);
-
-
-#endif /* __RTK_API_L2_H__ */
-
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-05 20:55:52 +0000