aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h')
-rw-r--r--target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h254
1 files changed, 0 insertions, 254 deletions
diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h
deleted file mode 100644
index f2689ebc70..0000000000
--- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/include/interrupt.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Copyright (C) 2013 Realtek Semiconductor Corp.
- * All Rights Reserved.
- *
- * Unless you and Realtek execute a separate written software license
- * agreement governing use of this software, this software is licensed
- * to you under the terms of the GNU General Public License version 2,
- * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt
- *
- * Purpose : RTL8367/RTL8367C switch high-level API
- *
- * Feature : The file includes Interrupt module high-layer API defination
- *
- */
-
-#ifndef __RTK_API_INTERRUPT_H__
-#define __RTK_API_INTERRUPT_H__
-
-
-/*
- * Data Type Declaration
- */
-#define RTK_MAX_NUM_OF_INTERRUPT_TYPE 1
-
-
-typedef struct rtk_int_status_s
-{
- rtk_uint16 value[RTK_MAX_NUM_OF_INTERRUPT_TYPE];
-} rtk_int_status_t;
-
-typedef struct rtk_int_info_s
-{
- rtk_portmask_t portMask;
- rtk_uint32 meterMask;
- rtk_uint32 systemLearnOver;
-}rtk_int_info_t;
-
-typedef enum rtk_int_type_e
-{
- INT_TYPE_LINK_STATUS = 0,
- INT_TYPE_METER_EXCEED,
- INT_TYPE_LEARN_LIMIT,
- INT_TYPE_LINK_SPEED,
- INT_TYPE_CONGEST,
- INT_TYPE_GREEN_FEATURE,
- INT_TYPE_LOOP_DETECT,
- INT_TYPE_8051,
- INT_TYPE_CABLE_DIAG,
- INT_TYPE_ACL,
- INT_TYPE_RESERVED, /* Unused */
- INT_TYPE_SLIENT,
- INT_TYPE_END
-}rtk_int_type_t;
-
-typedef enum rtk_int_advType_e
-{
- ADV_L2_LEARN_PORT_MASK = 0,
- ADV_SPEED_CHANGE_PORT_MASK,
- ADV_SPECIAL_CONGESTION_PORT_MASK,
- ADV_PORT_LINKDOWN_PORT_MASK,
- ADV_PORT_LINKUP_PORT_MASK,
- ADV_METER_EXCEED_MASK,
- ADV_RLDP_LOOPED,
- ADV_RLDP_RELEASED,
- ADV_END,
-} rtk_int_advType_t;
-
-typedef enum rtk_int_polarity_e
-{
- INT_POLAR_HIGH = 0,
- INT_POLAR_LOW,
- INT_POLAR_END
-} rtk_int_polarity_t;
-
-/* Function Name:
- * rtk_int_polarity_set
- * Description:
- * Set interrupt polarity configuration.
- * Input:
- * type - Interruptpolarity type.
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * The API can set interrupt polarity configuration.
- */
-extern rtk_api_ret_t rtk_int_polarity_set(rtk_int_polarity_t type);
-
-/* Function Name:
- * rtk_int_polarity_get
- * Description:
- * Get interrupt polarity configuration.
- * Input:
- * None
- * Output:
- * pType - Interruptpolarity type.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * Note:
- * The API can get interrupt polarity configuration.
- */
-extern rtk_api_ret_t rtk_int_polarity_get(rtk_int_polarity_t *pType);
-
-/* Function Name:
- * rtk_int_control_set
- * Description:
- * Set interrupt trigger status configuration.
- * Input:
- * type - Interrupt type.
- * enable - Interrupt status.
- * Output:
- * None
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_INPUT - Invalid input parameters.
- * RT_ERR_ENABLE - Invalid enable input.
- * Note:
- * The API can set interrupt status configuration.
- * The interrupt trigger status is shown in the following:
- * - INT_TYPE_LINK_STATUS
- * - INT_TYPE_METER_EXCEED
- * - INT_TYPE_LEARN_LIMIT
- * - INT_TYPE_LINK_SPEED
- * - INT_TYPE_CONGEST
- * - INT_TYPE_GREEN_FEATURE
- * - INT_TYPE_LOOP_DETECT
- * - INT_TYPE_8051,
- * - INT_TYPE_CABLE_DIAG,
- * - INT_TYPE_ACL,
- * - INT_TYPE_SLIENT
- */
-extern rtk_api_ret_t rtk_int_control_set(rtk_int_type_t type, rtk_enable_t enable);
-
-/* Function Name:
- * rtk_int_control_get
- * Description:
- * Get interrupt trigger status configuration.
- * Input:
- * type - Interrupt type.
- * Output:
- * pEnable - Interrupt status.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * The API can get interrupt status configuration.
- * The interrupt trigger status is shown in the following:
- * - INT_TYPE_LINK_STATUS
- * - INT_TYPE_METER_EXCEED
- * - INT_TYPE_LEARN_LIMIT
- * - INT_TYPE_LINK_SPEED
- * - INT_TYPE_CONGEST
- * - INT_TYPE_GREEN_FEATURE
- * - INT_TYPE_LOOP_DETECT
- * - INT_TYPE_8051,
- * - INT_TYPE_CABLE_DIAG,
- * - INT_TYPE_ACL,
- * - INT_TYPE_SLIENT
- */
-extern rtk_api_ret_t rtk_int_control_get(rtk_int_type_t type, rtk_enable_t* pEnable);
-
-/* Function Name:
- * rtk_int_status_set
- * Description:
- * Set interrupt trigger status to clean.
- * Input:
- * None
- * Output:
- * pStatusMask - Interrupt status bit mask.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * The API can clean interrupt trigger status when interrupt happened.
- * The interrupt trigger status is shown in the following:
- * - INT_TYPE_LINK_STATUS (value[0] (Bit0))
- * - INT_TYPE_METER_EXCEED (value[0] (Bit1))
- * - INT_TYPE_LEARN_LIMIT (value[0] (Bit2))
- * - INT_TYPE_LINK_SPEED (value[0] (Bit3))
- * - INT_TYPE_CONGEST (value[0] (Bit4))
- * - INT_TYPE_GREEN_FEATURE (value[0] (Bit5))
- * - INT_TYPE_LOOP_DETECT (value[0] (Bit6))
- * - INT_TYPE_8051 (value[0] (Bit7))
- * - INT_TYPE_CABLE_DIAG (value[0] (Bit8))
- * - INT_TYPE_ACL (value[0] (Bit9))
- * - INT_TYPE_SLIENT (value[0] (Bit11))
- * The status will be cleared after execute this API.
- */
-extern rtk_api_ret_t rtk_int_status_set(rtk_int_status_t *pStatusMask);
-
-/* Function Name:
- * rtk_int_status_get
- * Description:
- * Get interrupt trigger status.
- * Input:
- * None
- * Output:
- * pStatusMask - Interrupt status bit mask.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * The API can get interrupt trigger status when interrupt happened.
- * The interrupt trigger status is shown in the following:
- * - INT_TYPE_LINK_STATUS (value[0] (Bit0))
- * - INT_TYPE_METER_EXCEED (value[0] (Bit1))
- * - INT_TYPE_LEARN_LIMIT (value[0] (Bit2))
- * - INT_TYPE_LINK_SPEED (value[0] (Bit3))
- * - INT_TYPE_CONGEST (value[0] (Bit4))
- * - INT_TYPE_GREEN_FEATURE (value[0] (Bit5))
- * - INT_TYPE_LOOP_DETECT (value[0] (Bit6))
- * - INT_TYPE_8051 (value[0] (Bit7))
- * - INT_TYPE_CABLE_DIAG (value[0] (Bit8))
- * - INT_TYPE_ACL (value[0] (Bit9))
- * - INT_TYPE_SLIENT (value[0] (Bit11))
- *
- */
-extern rtk_api_ret_t rtk_int_status_get(rtk_int_status_t* pStatusMask);
-
-/* Function Name:
- * rtk_int_advanceInfo_get
- * Description:
- * Get interrupt advanced information.
- * Input:
- * adv_type - Advanced interrupt type.
- * Output:
- * info - Information per type.
- * Return:
- * RT_ERR_OK - OK
- * RT_ERR_FAILED - Failed
- * RT_ERR_SMI - SMI access error
- * RT_ERR_INPUT - Invalid input parameters.
- * Note:
- * This API can get advanced information when interrupt happened.
- * The status will be cleared after execute this API.
- */
-extern rtk_api_ret_t rtk_int_advanceInfo_get(rtk_int_advType_t adv_type, rtk_int_info_t* info);
-
-
-#endif /* __RTK_API_INTERRUPT_H__ */
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-05 19:18:09 +0000