diff options
Diffstat (limited to 'target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c')
| -rw-r--r-- | target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c | 843 |
1 files changed, 0 insertions, 843 deletions
diff --git a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c b/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c deleted file mode 100644 index c9b146a6d8..0000000000 --- a/target/linux/mediatek/files-5.4/drivers/net/phy/rtk/rtl8367c/dot1x.c +++ /dev/null @@ -1,843 +0,0 @@ -/* - * Copyright (C) 2013 Realtek Semiconductor Corp. - * All Rights Reserved. - * - * Unless you and Realtek execute a separate written software license - * agreement governing use of this software, this software is licensed - * to you under the terms of the GNU General Public License version 2, - * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt - * - * $Revision: 75783 $ - * $Date: 2017-02-13 14:54:53 +0800 (週一, 13 二月 2017) $ - * - * Purpose : RTK switch high-level API for RTL8367/RTL8367C - * Feature : Here is a list of all functions and variables in 1X module. - * - */ - -#include <rtk_switch.h> -#include <rtk_error.h> -#include <dot1x.h> -#include <string.h> -#include <vlan.h> -#include <rtl8367c_asicdrv.h> -#include <rtl8367c_asicdrv_dot1x.h> -#include <rtl8367c_asicdrv_rma.h> -#include <rtl8367c_asicdrv_lut.h> -#include <rtl8367c_asicdrv_vlan.h> - -/* Function Name: - * rtk_dot1x_unauthPacketOper_set - * Description: - * Set 802.1x unauth action configuration. - * Input: - * port - Port id. - * unauth_action - 802.1X unauth action. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * This API can set 802.1x unauth action configuration. - * The unauth action is as following: - * - DOT1X_ACTION_DROP - * - DOT1X_ACTION_TRAP2CPU - * - DOT1X_ACTION_GUESTVLAN - */ -rtk_api_ret_t rtk_dot1x_unauthPacketOper_set(rtk_port_t port, rtk_dot1x_unauth_action_t unauth_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (unauth_action >= DOT1X_ACTION_END) - return RT_ERR_DOT1X_PROC; - - if ((retVal = rtl8367c_setAsic1xProcConfig(rtk_switch_port_L2P_get(port), unauth_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_unauthPacketOper_get - * Description: - * Get 802.1x unauth action configuration. - * Input: - * port - Port id. - * Output: - * pUnauth_action - 802.1X unauth action. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * This API can get 802.1x unauth action configuration. - * The unauth action is as following: - * - DOT1X_ACTION_DROP - * - DOT1X_ACTION_TRAP2CPU - * - DOT1X_ACTION_GUESTVLAN - */ -rtk_api_ret_t rtk_dot1x_unauthPacketOper_get(rtk_port_t port, rtk_dot1x_unauth_action_t *pUnauth_action) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pUnauth_action) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xProcConfig(rtk_switch_port_L2P_get(port), pUnauth_action)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_eapolFrame2CpuEnable_set - * Description: - * Set 802.1x EAPOL packet trap to CPU configuration - * Input: - * enable - The status of 802.1x EAPOL packet. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_ENABLE - Invalid enable input. - * Note: - * To support 802.1x authentication functionality, EAPOL frame (ether type = 0x888E) has to - * be trapped to CPU. - * The status of EAPOL frame trap to CPU is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_eapolFrame2CpuEnable_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_getAsicRma(3, &rmacfg)) != RT_ERR_OK) - return retVal; - - if (ENABLED == enable) - rmacfg.operation = RMAOP_TRAP_TO_CPU; - else if (DISABLED == enable) - rmacfg.operation = RMAOP_FORWARD; - - if ((retVal = rtl8367c_setAsicRma(3, &rmacfg)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_eapolFrame2CpuEnable_get - * Description: - * Get 802.1x EAPOL packet trap to CPU configuration - * Input: - * None - * Output: - * pEnable - The status of 802.1x EAPOL packet. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * To support 802.1x authentication functionality, EAPOL frame (ether type = 0x888E) has to - * be trapped to CPU. - * The status of EAPOL frame trap to CPU is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_eapolFrame2CpuEnable_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - rtl8367c_rma_t rmacfg; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsicRma(3, &rmacfg)) != RT_ERR_OK) - return retVal; - - if (RMAOP_TRAP_TO_CPU == rmacfg.operation) - *pEnable = ENABLED; - else - *pEnable = DISABLED; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedEnable_set - * Description: - * Set 802.1x port-based enable configuration - * Input: - * port - Port id. - * enable - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_PORTBASEDPNEN - 802.1X port-based enable error - * Note: - * The API can update the port-based port enable register content. If a port is 802.1x - * port based network access control "enabled", it should be authenticated so packets - * from that port won't be dropped or trapped to CPU. - * The status of 802.1x port-based network access control is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_portBasedEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsic1xPBEnConfig(rtk_switch_port_L2P_get(port),enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedEnable_get - * Description: - * Get 802.1x port-based enable configuration - * Input: - * port - Port id. - * Output: - * pEnable - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get the 802.1x port-based port status. - */ -rtk_api_ret_t rtk_dot1x_portBasedEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xPBEnConfig(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedAuthStatus_set - * Description: - * Set 802.1x port-based auth. port configuration - * Input: - * port - Port id. - * port_auth - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_DOT1X_PORTBASEDAUTH - 802.1X port-based auth error - * Note: - * The authenticated status of 802.1x port-based network access control is as following: - * - UNAUTH - * - AUTH - */ -rtk_api_ret_t rtk_dot1x_portBasedAuthStatus_set(rtk_port_t port, rtk_dot1x_auth_status_t port_auth) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (port_auth >= AUTH_STATUS_END) - return RT_ERR_DOT1X_PORTBASEDAUTH; - - if ((retVal = rtl8367c_setAsic1xPBAuthConfig(rtk_switch_port_L2P_get(port), port_auth)) != RT_ERR_OK) - return retVal; - - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedAuthStatus_get - * Description: - * Get 802.1x port-based auth. port configuration - * Input: - * port - Port id. - * Output: - * pPort_auth - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1x port-based port auth.information. - */ -rtk_api_ret_t rtk_dot1x_portBasedAuthStatus_get(rtk_port_t port, rtk_dot1x_auth_status_t *pPort_auth) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPort_auth) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsic1xPBAuthConfig(rtk_switch_port_L2P_get(port), pPort_auth)) != RT_ERR_OK) - return retVal; - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedDirection_set - * Description: - * Set 802.1x port-based operational direction configuration - * Input: - * port - Port id. - * port_direction - Operation direction - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_DOT1X_PORTBASEDOPDIR - 802.1X port-based operation direction error - * Note: - * The operate controlled direction of 802.1x port-based network access control is as following: - * - BOTH - * - IN - */ -rtk_api_ret_t rtk_dot1x_portBasedDirection_set(rtk_port_t port, rtk_dot1x_direction_t port_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (port_direction >= DIRECTION_END) - return RT_ERR_DOT1X_PORTBASEDOPDIR; - - if ((retVal = rtl8367c_setAsic1xPBOpdirConfig(rtk_switch_port_L2P_get(port), port_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_portBasedDirection_get - * Description: - * Get 802.1X port-based operational direction configuration - * Input: - * port - Port id. - * Output: - * pPort_direction - Operation direction - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can get 802.1x port-based operational direction information. - */ -rtk_api_ret_t rtk_dot1x_portBasedDirection_get(rtk_port_t port, rtk_dot1x_direction_t *pPort_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pPort_direction) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsic1xPBOpdirConfig(rtk_switch_port_L2P_get(port), pPort_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedEnable_set - * Description: - * Set 802.1x mac-based port enable configuration - * Input: - * port - Port id. - * enable - The status of 802.1x port. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_MACBASEDPNEN - 802.1X mac-based enable error - * Note: - * If a port is 802.1x MAC based network access control "enabled", the incoming packets should - * be authenticated so packets from that port won't be dropped or trapped to CPU. - * The status of 802.1x MAC-based network access control is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_macBasedEnable_set(rtk_port_t port, rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsic1xMBEnConfig(rtk_switch_port_L2P_get(port),enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedEnable_get - * Description: - * Get 802.1x mac-based port enable configuration - * Input: - * port - Port id. - * Output: - * pEnable - The status of 802.1x port. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * If a port is 802.1x MAC based network access control "enabled", the incoming packets should - * be authenticated so packets from that port wont be dropped or trapped to CPU. - * The status of 802.1x MAC-based network access control is as following: - * - DISABLED - * - ENABLED - */ -rtk_api_ret_t rtk_dot1x_macBasedEnable_get(rtk_port_t port, rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if ((retVal = rtl8367c_getAsic1xMBEnConfig(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedAuthMac_add - * Description: - * Add an authenticated MAC to ASIC - * Input: - * port - Port id. - * pAuth_mac - The authenticated MAC. - * fid - filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_PORT_ID - Invalid port number. - * RT_ERR_ENABLE - Invalid enable input. - * RT_ERR_DOT1X_MACBASEDPNEN - 802.1X mac-based enable error - * Note: - * The API can add a 802.1x authenticated MAC address to port. If the MAC does not exist in LUT, - * user can't add this MAC to auth status. - */ -rtk_api_ret_t rtk_dot1x_macBasedAuthMac_add(rtk_port_t port, rtk_mac_t *pAuth_mac, rtk_fid_t fid) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* must be unicast address */ - if ((pAuth_mac == NULL) || (pAuth_mac->octet[0] & 0x1)) - return RT_ERR_MAC; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if ( RT_ERR_OK == retVal) - { - if (l2Table.spa != rtk_switch_port_L2P_get(port)) - return RT_ERR_DOT1X_MAC_PORT_MISMATCH; - - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - l2Table.efid = 0; - l2Table.auth = 1; - retVal = rtl8367c_setAsicL2LookupTb(&l2Table); - return retVal; - } - else - return retVal; - -} - -/* Function Name: - * rtk_dot1x_macBasedAuthMac_del - * Description: - * Delete an authenticated MAC to ASIC - * Input: - * port - Port id. - * pAuth_mac - The authenticated MAC. - * fid - filtering database. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_MAC - Invalid MAC address. - * RT_ERR_PORT_ID - Invalid port number. - * Note: - * The API can delete a 802.1x authenticated MAC address to port. It only change the auth status of - * the MAC and won't delete it from LUT. - */ -rtk_api_ret_t rtk_dot1x_macBasedAuthMac_del(rtk_port_t port, rtk_mac_t *pAuth_mac, rtk_fid_t fid) -{ - rtk_api_ret_t retVal; - rtk_uint32 method; - rtl8367c_luttb l2Table; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* must be unicast address */ - if ((pAuth_mac == NULL) || (pAuth_mac->octet[0] & 0x1)) - return RT_ERR_MAC; - - /* Check port Valid */ - RTK_CHK_PORT_VALID(port); - - if (fid > RTL8367C_FIDMAX) - return RT_ERR_L2_FID; - - memset(&l2Table, 0, sizeof(rtl8367c_luttb)); - - /* fill key (MAC,FID) to get L2 entry */ - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - method = LUTREADMETHOD_MAC; - retVal = rtl8367c_getAsicL2LookupTb(method, &l2Table); - if (RT_ERR_OK == retVal) - { - if (l2Table.spa != rtk_switch_port_L2P_get(port)) - return RT_ERR_DOT1X_MAC_PORT_MISMATCH; - - memcpy(l2Table.mac.octet, pAuth_mac->octet, ETHER_ADDR_LEN); - l2Table.fid = fid; - l2Table.auth = 0; - retVal = rtl8367c_setAsicL2LookupTb(&l2Table); - return retVal; - } - else - return retVal; - -} - -/* Function Name: - * rtk_dot1x_macBasedDirection_set - * Description: - * Set 802.1x mac-based operational direction configuration - * Input: - * mac_direction - Operation direction - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * RT_ERR_DOT1X_MACBASEDOPDIR - 802.1X mac-based operation direction error - * Note: - * The operate controlled direction of 802.1x mac-based network access control is as following: - * - BOTH - * - IN - */ -rtk_api_ret_t rtk_dot1x_macBasedDirection_set(rtk_dot1x_direction_t mac_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (mac_direction >= DIRECTION_END) - return RT_ERR_DOT1X_MACBASEDOPDIR; - - if ((retVal = rtl8367c_setAsic1xMBOpdirConfig(mac_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_macBasedDirection_get - * Description: - * Get 802.1x mac-based operational direction configuration - * Input: - * port - Port id. - * Output: - * pMac_direction - Operation direction - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x mac-based operational direction information. - */ -rtk_api_ret_t rtk_dot1x_macBasedDirection_get(rtk_dot1x_direction_t *pMac_direction) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pMac_direction) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xMBOpdirConfig(pMac_direction)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * Set 802.1x guest VLAN configuration - * Description: - * Set 802.1x mac-based operational direction configuration - * Input: - * vid - 802.1x guest VLAN ID - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The operate controlled 802.1x guest VLAN - */ -rtk_api_ret_t rtk_dot1x_guestVlan_set(rtk_vlan_t vid) -{ - rtk_api_ret_t retVal; - rtk_uint32 index; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - /* vid must be 0~4095 */ - if (vid > RTL8367C_VIDMAX) - return RT_ERR_VLAN_VID; - - if((retVal = rtk_vlan_checkAndCreateMbr(vid, &index)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_setAsic1xGuestVidx(index)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_guestVlan_get - * Description: - * Get 802.1x guest VLAN configuration - * Input: - * None - * Output: - * pVid - 802.1x guest VLAN ID - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x guest VLAN information. - */ -rtk_api_ret_t rtk_dot1x_guestVlan_get(rtk_vlan_t *pVid) -{ - rtk_api_ret_t retVal; - rtk_uint32 gvidx; - rtl8367c_vlanconfiguser vlanMC; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pVid) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xGuestVidx(&gvidx)) != RT_ERR_OK) - return retVal; - - if ((retVal = rtl8367c_getAsicVlanMemberConfig(gvidx, &vlanMC)) != RT_ERR_OK) - return retVal; - - *pVid = vlanMC.evid; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_guestVlan2Auth_set - * Description: - * Set 802.1x guest VLAN to auth host configuration - * Input: - * enable - The status of guest VLAN to auth host. - * Output: - * None - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameter. - * Note: - * The operational direction of 802.1x guest VLAN to auth host control is as following: - * - ENABLED - * - DISABLED - */ -rtk_api_ret_t rtk_dot1x_guestVlan2Auth_set(rtk_enable_t enable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if (enable >= RTK_ENABLE_END) - return RT_ERR_ENABLE; - - if ((retVal = rtl8367c_setAsic1xGVOpdir(enable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - -/* Function Name: - * rtk_dot1x_guestVlan2Auth_get - * Description: - * Get 802.1x guest VLAN to auth host configuration - * Input: - * None - * Output: - * pEnable - The status of guest VLAN to auth host. - * Return: - * RT_ERR_OK - OK - * RT_ERR_FAILED - Failed - * RT_ERR_SMI - SMI access error - * RT_ERR_INPUT - Invalid input parameters. - * Note: - * The API can get 802.1x guest VLAN to auth host information. - */ -rtk_api_ret_t rtk_dot1x_guestVlan2Auth_get(rtk_enable_t *pEnable) -{ - rtk_api_ret_t retVal; - - /* Check initialization state */ - RTK_CHK_INIT_STATE(); - - if(NULL == pEnable) - return RT_ERR_NULL_POINTER; - - if ((retVal = rtl8367c_getAsic1xGVOpdir(pEnable)) != RT_ERR_OK) - return retVal; - - return RT_ERR_OK; -} - - |