diff options
Diffstat (limited to 'target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/svlan.c')
| -rw-r--r-- | target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/svlan.c | 2415 |
1 files changed, 2415 insertions, 0 deletions
diff --git a/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/svlan.c b/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/svlan.c new file mode 100644 index 0000000000..bf4ef044d1 --- /dev/null +++ b/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/svlan.c @@ -0,0 +1,2415 @@ +/* + * Copyright (C) 2013 Realtek Semiconductor Corp. + * All Rights Reserved. + * + * Unless you and Realtek execute a separate written software license + * agreement governing use of this software, this software is licensed + * to you under the terms of the GNU General Public License version 2, + * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt + * + * $Revision: 76306 $ + * $Date: 2017-03-08 15:13:58 +0800 (週三, 08 三月 2017) $ + * + * Purpose : RTK switch high-level API for RTL8367/RTL8367C + * Feature : Here is a list of all functions and variables in SVLAN module. + * + */ + +#include <rtk_switch.h> +#include <rtk_error.h> +#include <svlan.h> +#include <vlan.h> +#include <string.h> + +#include <rtl8367c_asicdrv.h> +#include <rtl8367c_asicdrv_svlan.h> + +rtk_uint8 svlan_mbrCfgUsage[RTL8367C_SVIDXNO]; +rtk_uint16 svlan_mbrCfgVid[RTL8367C_SVIDXNO]; +rtk_svlan_lookupType_t svlan_lookupType; +/* Function Name: + * rtk_svlan_init + * Description: + * Initialize SVLAN Configuration + * Input: + * None + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 for Q-in-Q SLAN design. + * User can set mathced ether type as service provider supported protocol. + */ +rtk_api_ret_t rtk_svlan_init(void) +{ + rtk_uint32 i; + rtk_api_ret_t retVal; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_s2c_t svlanSP2CConf; + rtl8367c_svlan_mc2s_t svlanMC2SConf; + rtk_uint32 svidx; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + /*default use C-priority*/ + if ((retVal = rtl8367c_setAsicSvlanPrioritySel(SPRISEL_CTAGPRI)) != RT_ERR_OK) + return retVal; + + /*Drop SVLAN untag frame*/ + if ((retVal = rtl8367c_setAsicSvlanIngressUntag(UNTAG_DROP)) != RT_ERR_OK) + return retVal; + + /*Drop SVLAN unmatch frame*/ + if ((retVal = rtl8367c_setAsicSvlanIngressUnmatch(UNMATCH_DROP)) != RT_ERR_OK) + return retVal; + + /*Set TPID to 0x88a8*/ + if ((retVal = rtl8367c_setAsicSvlanTpid(0x88a8)) != RT_ERR_OK) + return retVal; + + /*Clean Uplink Port Mask to none*/ + if ((retVal = rtl8367c_setAsicSvlanUplinkPortMask(0)) != RT_ERR_OK) + return retVal; + + /*Clean SVLAN Member Configuration*/ + for (i=0; i<= RTL8367C_SVIDXMAX; i++) + { + memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); + if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + } + + /*Clean C2S Configuration*/ + for (i=0; i<= RTL8367C_C2SIDXMAX; i++) + { + if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, 0,0,0)) != RT_ERR_OK) + return retVal; + } + + /*Clean SP2C Configuration*/ + for (i=0; i <= RTL8367C_SP2CMAX ; i++) + { + memset(&svlanSP2CConf, 0, sizeof(rtl8367c_svlan_s2c_t)); + if ((retVal = rtl8367c_setAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) + return retVal; + } + + /*Clean MC2S Configuration*/ + for (i=0 ; i<= RTL8367C_MC2SIDXMAX; i++) + { + memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); + if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + } + + + if ((retVal = rtk_svlan_lookupType_set(SVLAN_LOOKUP_S64MBRCGF)) != RT_ERR_OK) + return retVal; + + + for (svidx = 0; svidx <= RTL8367C_SVIDXMAX; svidx++) + { + svlan_mbrCfgUsage[svidx] = FALSE; + } + + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_servicePort_add + * Description: + * Add one service port in the specified device + * Input: + * port - Port id. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * This API is setting which port is connected to provider switch. All frames receiving from this port must + * contain accept SVID in S-tag field. + */ +rtk_api_ret_t rtk_svlan_servicePort_add(rtk_port_t port) +{ + rtk_api_ret_t retVal; + rtk_uint32 pmsk; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + /* check port valid */ + RTK_CHK_PORT_VALID(port); + + if ((retVal = rtl8367c_getAsicSvlanUplinkPortMask(&pmsk)) != RT_ERR_OK) + return retVal; + + pmsk = pmsk | (1<<rtk_switch_port_L2P_get(port)); + + if ((retVal = rtl8367c_setAsicSvlanUplinkPortMask(pmsk)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_servicePort_get + * Description: + * Get service ports in the specified device. + * Input: + * None + * Output: + * pSvlan_portmask - pointer buffer of svlan ports. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * This API is setting which port is connected to provider switch. All frames receiving from this port must + * contain accept SVID in S-tag field. + */ +rtk_api_ret_t rtk_svlan_servicePort_get(rtk_portmask_t *pSvlan_portmask) +{ + rtk_api_ret_t retVal; + rtk_uint32 phyMbrPmask; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvlan_portmask) + return RT_ERR_NULL_POINTER; + + if ((retVal = rtl8367c_getAsicSvlanUplinkPortMask(&phyMbrPmask)) != RT_ERR_OK) + return retVal; + + if(rtk_switch_portmask_P2L_get(phyMbrPmask, pSvlan_portmask) != RT_ERR_OK) + return RT_ERR_FAILED; + + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_servicePort_del + * Description: + * Delete one service port in the specified device + * Input: + * port - Port id. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * Note: + * This API is removing SVLAN service port in the specified device. + */ +rtk_api_ret_t rtk_svlan_servicePort_del(rtk_port_t port) +{ + rtk_api_ret_t retVal; + rtk_uint32 pmsk; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + /* check port valid */ + RTK_CHK_PORT_VALID(port); + + if ((retVal = rtl8367c_getAsicSvlanUplinkPortMask(&pmsk)) != RT_ERR_OK) + return retVal; + + pmsk = pmsk & ~(1<<rtk_switch_port_L2P_get(port)); + + if ((retVal = rtl8367c_setAsicSvlanUplinkPortMask(pmsk)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_tpidEntry_set + * Description: + * Configure accepted S-VLAN ether type. + * Input: + * svlan_tag_id - Ether type of S-tag frame parsing in uplink ports. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * Note: + * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 for Q-in-Q SLAN design. + * User can set mathced ether type as service provider supported protocol. + */ +rtk_api_ret_t rtk_svlan_tpidEntry_set(rtk_svlan_tpid_t svlan_tag_id) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (svlan_tag_id>RTK_MAX_NUM_OF_PROTO_TYPE) + return RT_ERR_INPUT; + + if ((retVal = rtl8367c_setAsicSvlanTpid(svlan_tag_id)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_tpidEntry_get + * Description: + * Get accepted S-VLAN ether type setting. + * Input: + * None + * Output: + * pSvlan_tag_id - Ether type of S-tag frame parsing in uplink ports. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * This API is setting which port is connected to provider switch. All frames receiving from this port must + * contain accept SVID in S-tag field. + */ +rtk_api_ret_t rtk_svlan_tpidEntry_get(rtk_svlan_tpid_t *pSvlan_tag_id) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvlan_tag_id) + return RT_ERR_NULL_POINTER; + + if ((retVal = rtl8367c_getAsicSvlanTpid(pSvlan_tag_id)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_priorityRef_set + * Description: + * Set S-VLAN upstream priority reference setting. + * Input: + * ref - reference selection parameter. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * Note: + * The API can set the upstream SVLAN tag priority reference source. The related priority + * sources are as following: + * - REF_INTERNAL_PRI, + * - REF_CTAG_PRI, + * - REF_SVLAN_PRI, + * - REF_PB_PRI. + */ +rtk_api_ret_t rtk_svlan_priorityRef_set(rtk_svlan_pri_ref_t ref) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (ref >= REF_PRI_END) + return RT_ERR_INPUT; + + if ((retVal = rtl8367c_setAsicSvlanPrioritySel(ref)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_priorityRef_get + * Description: + * Get S-VLAN upstream priority reference setting. + * Input: + * None + * Output: + * pRef - reference selection parameter. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * The API can get the upstream SVLAN tag priority reference source. The related priority + * sources are as following: + * - REF_INTERNAL_PRI, + * - REF_CTAG_PRI, + * - REF_SVLAN_PRI, + * - REF_PB_PRI + */ +rtk_api_ret_t rtk_svlan_priorityRef_get(rtk_svlan_pri_ref_t *pRef) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pRef) + return RT_ERR_NULL_POINTER; + + if ((retVal = rtl8367c_getAsicSvlanPrioritySel(pRef)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_memberPortEntry_set + * Description: + * Configure system SVLAN member content + * Input: + * svid - SVLAN id + * psvlan_cfg - SVLAN member configuration + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_PORT_MASK - Invalid portmask. + * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. + * Note: + * The API can set system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted + * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped by default setup. + * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. + */ +rtk_api_ret_t rtk_svlan_memberPortEntry_set(rtk_vlan_t svid, rtk_svlan_memberCfg_t *pSvlan_cfg) +{ + rtk_api_ret_t retVal; + rtk_int32 i; + rtk_uint32 empty_idx; + rtl8367c_svlan_memconf_t svlanMemConf; + rtk_uint32 phyMbrPmask; + rtk_vlan_cfg_t vlanCfg; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvlan_cfg) + return RT_ERR_NULL_POINTER; + + if(svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->memberport)); + + RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->untagport)); + + if (pSvlan_cfg->fiden > ENABLED) + return RT_ERR_ENABLE; + + if (pSvlan_cfg->fid > RTL8367C_FIDMAX) + return RT_ERR_L2_FID; + + if (pSvlan_cfg->priority > RTL8367C_PRIMAX) + return RT_ERR_VLAN_PRIORITY; + + if (pSvlan_cfg->efiden > ENABLED) + return RT_ERR_ENABLE; + + if (pSvlan_cfg->efid > RTL8367C_EFIDMAX) + return RT_ERR_L2_FID; + + if(SVLAN_LOOKUP_C4KVLAN == svlan_lookupType) + { + if ((retVal = rtk_vlan_get(svid, &vlanCfg)) != RT_ERR_OK) + return retVal; + + vlanCfg.mbr = pSvlan_cfg->memberport; + vlanCfg.untag = pSvlan_cfg->untagport; + + if ((retVal = rtk_vlan_set(svid, &vlanCfg)) != RT_ERR_OK) + return retVal; + + empty_idx = 0xFF; + + for (i = 0; i<= RTL8367C_SVIDXMAX; i++) + { + if (svid == svlan_mbrCfgVid[i] && TRUE == svlan_mbrCfgUsage[i]) + { + memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); + svlanMemConf.vs_svid = svid; + svlanMemConf.vs_efiden = pSvlan_cfg->efiden; + svlanMemConf.vs_efid = pSvlan_cfg->efid; + svlanMemConf.vs_priority = pSvlan_cfg->priority; + + /*for create check*/ + if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) + svlanMemConf.vs_efid = 1; + + if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; + } + else if (FALSE == svlan_mbrCfgUsage[i] && 0xFF == empty_idx) + { + empty_idx = i; + } + } + + if (empty_idx != 0xFF) + { + svlan_mbrCfgUsage[empty_idx] = TRUE; + svlan_mbrCfgVid[empty_idx] = svid; + + memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); + svlanMemConf.vs_svid = svid; + svlanMemConf.vs_efiden = pSvlan_cfg->efiden; + svlanMemConf.vs_efid = pSvlan_cfg->efid; + svlanMemConf.vs_priority = pSvlan_cfg->priority; + + /*for create check*/ + if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) + svlanMemConf.vs_efid = 1; + + if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + } + + return RT_ERR_OK; + } + + + empty_idx = 0xFF; + + for (i = 0; i<= RTL8367C_SVIDXMAX; i++) + { + /* + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + */ + if (svid == svlan_mbrCfgVid[i] && TRUE == svlan_mbrCfgUsage[i]) + { + svlanMemConf.vs_svid = svid; + + if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) + return RT_ERR_FAILED; + + svlanMemConf.vs_member = phyMbrPmask; + + if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) + return RT_ERR_FAILED; + + svlanMemConf.vs_untag = phyMbrPmask; + + svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; + svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; + svlanMemConf.vs_priority = pSvlan_cfg->priority; + svlanMemConf.vs_efiden = pSvlan_cfg->efiden; + svlanMemConf.vs_efid = pSvlan_cfg->efid; + + /*all items are reset means deleting*/ + if( 0 == svlanMemConf.vs_member && + 0 == svlanMemConf.vs_untag && + 0 == svlanMemConf.vs_force_fid && + 0 == svlanMemConf.vs_fid_msti && + 0 == svlanMemConf.vs_priority && + 0 == svlanMemConf.vs_efiden && + 0 == svlanMemConf.vs_efid) + { + svlan_mbrCfgUsage[i] = FALSE; + svlan_mbrCfgVid[i] = 0; + + /* Clear SVID also */ + svlanMemConf.vs_svid = 0; + } + else + { + svlan_mbrCfgUsage[i] = TRUE; + svlan_mbrCfgVid[i] = svlanMemConf.vs_svid; + + if(0 == svlanMemConf.vs_svid) + { + /*for create check*/ + if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) + { + svlanMemConf.vs_efid = 1; + } + } + } + + if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; + } + else if (FALSE == svlan_mbrCfgUsage[i] && 0xFF == empty_idx) + { + empty_idx = i; + } + } + + if (empty_idx != 0xFF) + { + memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); + svlanMemConf.vs_svid = svid; + + if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) + return RT_ERR_FAILED; + + svlanMemConf.vs_member = phyMbrPmask; + + if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) + return RT_ERR_FAILED; + + svlanMemConf.vs_untag = phyMbrPmask; + + svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; + svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; + svlanMemConf.vs_priority = pSvlan_cfg->priority; + + svlanMemConf.vs_efiden = pSvlan_cfg->efiden; + svlanMemConf.vs_efid = pSvlan_cfg->efid; + + /*change efid for empty svid 0*/ + if(0 == svlanMemConf.vs_svid) + { /*for create check*/ + if(0 == svlanMemConf.vs_efiden && 0 == svlanMemConf.vs_efid) + { + svlanMemConf.vs_efid = 1; + } + } + + svlan_mbrCfgUsage[empty_idx] = TRUE; + svlan_mbrCfgVid[empty_idx] = svlanMemConf.vs_svid; + + if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlanMemConf)) != RT_ERR_OK) + { + return retVal; + } + + return RT_ERR_OK; + } + + return RT_ERR_SVLAN_TABLE_FULL; +} + +/* Function Name: + * rtk_svlan_memberPortEntry_get + * Description: + * Get SVLAN member Configure. + * Input: + * svid - SVLAN id + * Output: + * pSvlan_cfg - SVLAN member configuration + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted + * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. + */ +rtk_api_ret_t rtk_svlan_memberPortEntry_get(rtk_vlan_t svid, rtk_svlan_memberCfg_t *pSvlan_cfg) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvlan_cfg) + return RT_ERR_NULL_POINTER; + + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + + for (i = 0; i<= RTL8367C_SVIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + pSvlan_cfg->svid = svlanMemConf.vs_svid; + + if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_member,&(pSvlan_cfg->memberport)) != RT_ERR_OK) + return RT_ERR_FAILED; + + if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_untag,&(pSvlan_cfg->untagport)) != RT_ERR_OK) + return RT_ERR_FAILED; + + pSvlan_cfg->fiden = svlanMemConf.vs_force_fid; + pSvlan_cfg->fid = svlanMemConf.vs_fid_msti; + pSvlan_cfg->priority = svlanMemConf.vs_priority; + pSvlan_cfg->efiden = svlanMemConf.vs_efiden; + pSvlan_cfg->efid = svlanMemConf.vs_efid; + + return RT_ERR_OK; + } + } + + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + +} + +/* Function Name: + * rtk_svlan_memberPortEntry_adv_set + * Description: + * Configure system SVLAN member by index + * Input: + * idx - Index (0 ~ 63) + * psvlan_cfg - SVLAN member configuration + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_PORT_MASK - Invalid portmask. + * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. + * Note: + * The API can set system 64 accepted s-tag frame format by index. + * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. + */ +rtk_api_ret_t rtk_svlan_memberPortEntry_adv_set(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg) +{ + rtk_api_ret_t retVal; + rtl8367c_svlan_memconf_t svlanMemConf; + rtk_uint32 phyMbrPmask; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvlan_cfg) + return RT_ERR_NULL_POINTER; + + if (idx > RTL8367C_SVIDXMAX) + return RT_ERR_SVLAN_ENTRY_INDEX; + + if (pSvlan_cfg->svid>RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->memberport)); + + RTK_CHK_PORTMASK_VALID(&(pSvlan_cfg->untagport)); + + if (pSvlan_cfg->fiden > ENABLED) + return RT_ERR_ENABLE; + + if (pSvlan_cfg->fid > RTL8367C_FIDMAX) + return RT_ERR_L2_FID; + + if (pSvlan_cfg->priority > RTL8367C_PRIMAX) + return RT_ERR_VLAN_PRIORITY; + + if (pSvlan_cfg->efiden > ENABLED) + return RT_ERR_ENABLE; + + if (pSvlan_cfg->efid > RTL8367C_EFIDMAX) + return RT_ERR_L2_FID; + + memset(&svlanMemConf, 0, sizeof(rtl8367c_svlan_memconf_t)); + svlanMemConf.vs_svid = pSvlan_cfg->svid; + if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->memberport), &phyMbrPmask) != RT_ERR_OK) + return RT_ERR_FAILED; + + svlanMemConf.vs_member = phyMbrPmask; + + if(rtk_switch_portmask_L2P_get(&(pSvlan_cfg->untagport), &phyMbrPmask) != RT_ERR_OK) + return RT_ERR_FAILED; + + svlanMemConf.vs_untag = phyMbrPmask; + + + svlanMemConf.vs_force_fid = pSvlan_cfg->fiden; + svlanMemConf.vs_fid_msti = pSvlan_cfg->fid; + svlanMemConf.vs_priority = pSvlan_cfg->priority; + svlanMemConf.vs_efiden = pSvlan_cfg->efiden; + svlanMemConf.vs_efid = pSvlan_cfg->efid; + + if(0 == svlanMemConf.vs_svid && + 0 == svlanMemConf.vs_member && + 0 == svlanMemConf.vs_untag && + 0 == svlanMemConf.vs_force_fid && + 0 == svlanMemConf.vs_fid_msti && + 0 == svlanMemConf.vs_priority && + 0 == svlanMemConf.vs_efiden && + 0 == svlanMemConf.vs_efid) + { + svlan_mbrCfgUsage[idx] = FALSE; + svlan_mbrCfgVid[idx] = 0; + } + else + { + svlan_mbrCfgUsage[idx] = TRUE; + svlan_mbrCfgVid[idx] = svlanMemConf.vs_svid; + } + + if ((retVal = rtl8367c_setAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_memberPortEntry_adv_get + * Description: + * Get SVLAN member Configure by index. + * Input: + * idx - Index (0 ~ 63) + * Output: + * pSvlan_cfg - SVLAN member configuration + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted + * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. + */ +rtk_api_ret_t rtk_svlan_memberPortEntry_adv_get(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg) +{ + rtk_api_ret_t retVal; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvlan_cfg) + return RT_ERR_NULL_POINTER; + + if (idx > RTL8367C_SVIDXMAX) + return RT_ERR_SVLAN_ENTRY_INDEX; + + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + pSvlan_cfg->svid = svlanMemConf.vs_svid; + if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_member,&(pSvlan_cfg->memberport)) != RT_ERR_OK) + return RT_ERR_FAILED; + + if(rtk_switch_portmask_P2L_get(svlanMemConf.vs_untag,&(pSvlan_cfg->untagport)) != RT_ERR_OK) + return RT_ERR_FAILED; + + pSvlan_cfg->fiden = svlanMemConf.vs_force_fid; + pSvlan_cfg->fid = svlanMemConf.vs_fid_msti; + pSvlan_cfg->priority = svlanMemConf.vs_priority; + pSvlan_cfg->efiden = svlanMemConf.vs_efiden; + pSvlan_cfg->efid = svlanMemConf.vs_efid; + + return RT_ERR_OK; + +} + +/* Function Name: + * rtk_svlan_defaultSvlan_set + * Description: + * Configure default egress SVLAN. + * Input: + * port - Source port + * svid - SVLAN id + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * Note: + * The API can set port n S-tag format index while receiving frame from port n + * is transmit through uplink port with s-tag field + */ +rtk_api_ret_t rtk_svlan_defaultSvlan_set(rtk_port_t port, rtk_vlan_t svid) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + /* Check port Valid */ + RTK_CHK_PORT_VALID(port); + + /* svid must be 0~4095 */ + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + if ((retVal = rtl8367c_setAsicSvlanDefaultVlan(rtk_switch_port_L2P_get(port), i)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; + } + } + + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; +} + +/* Function Name: + * rtk_svlan_defaultSvlan_get + * Description: + * Get the configure default egress SVLAN. + * Input: + * port - Source port + * Output: + * pSvid - SVLAN VID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get port n S-tag format index while receiving frame from port n + * is transmit through uplink port with s-tag field + */ +rtk_api_ret_t rtk_svlan_defaultSvlan_get(rtk_port_t port, rtk_vlan_t *pSvid) +{ + rtk_api_ret_t retVal; + rtk_uint32 idx; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvid) + return RT_ERR_NULL_POINTER; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(port); + + if ((retVal = rtl8367c_getAsicSvlanDefaultVlan(rtk_switch_port_L2P_get(port), &idx)) != RT_ERR_OK) + return retVal; + + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(idx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + *pSvid = svlanMemConf.vs_svid; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_c2s_add + * Description: + * Configure SVLAN C2S table + * Input: + * vid - VLAN ID + * src_port - Ingress Port + * svid - SVLAN VID + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port ID. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_VLAN_VID - Invalid VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can set system C2S configuration. ASIC will check upstream's VID and assign related + * SVID to mathed packet. There are 128 SVLAN C2S configurations. + */ +rtk_api_ret_t rtk_svlan_c2s_add(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t svid) +{ + rtk_api_ret_t retVal, i; + rtk_uint32 empty_idx; + rtk_uint32 evid, pmsk, svidx, c2s_svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + rtk_port_t phyPort; + rtk_uint16 doneFlag; + + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + + if (vid > RTL8367C_VIDMAX) + return RT_ERR_VLAN_VID; + + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(src_port); + + phyPort = rtk_switch_port_L2P_get(src_port); + + empty_idx = 0xFFFF; + svidx = 0xFFFF; + doneFlag = FALSE; + + for (i = 0; i<= RTL8367C_SVIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + svidx = i; + break; + } + } + + if (0xFFFF == svidx) + return RT_ERR_SVLAN_VID; + + for (i=RTL8367C_C2SIDXMAX; i>=0; i--) + { + if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &c2s_svidx)) != RT_ERR_OK) + return retVal; + + if (evid == vid) + { + /* Check Src_port */ + if(pmsk & (1 << phyPort)) + { + /* Check SVIDX */ + if(c2s_svidx == svidx) + { + /* All the same, do nothing */ + } + else + { + /* New svidx, remove src_port and find a new slot to add a new enrty */ + pmsk = pmsk & ~(1 << phyPort); + if(pmsk == 0) + c2s_svidx = 0; + + if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, c2s_svidx)) != RT_ERR_OK) + return retVal; + } + } + else + { + if(c2s_svidx == svidx && doneFlag == FALSE) + { + pmsk = pmsk | (1 << phyPort); + if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, svidx)) != RT_ERR_OK) + return retVal; + + doneFlag = TRUE; + } + } + } + else if (evid==0&&pmsk==0) + { + empty_idx = i; + } + } + + if (0xFFFF != empty_idx && doneFlag ==FALSE) + { + if ((retVal = rtl8367c_setAsicSvlanC2SConf(empty_idx, vid, (1<<phyPort), svidx)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; + } + else if(doneFlag == TRUE) + { + return RT_ERR_OK; + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_c2s_del + * Description: + * Delete one C2S entry + * Input: + * vid - VLAN ID + * src_port - Ingress Port + * svid - SVLAN VID + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_VLAN_VID - Invalid VID parameter. + * RT_ERR_PORT_ID - Invalid port ID. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete system C2S configuration. There are 128 SVLAN C2S configurations. + */ +rtk_api_ret_t rtk_svlan_c2s_del(rtk_vlan_t vid, rtk_port_t src_port) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtk_uint32 evid, pmsk, svidx; + rtk_port_t phyPort; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (vid > RTL8367C_EVIDMAX) + return RT_ERR_VLAN_VID; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(src_port); + phyPort = rtk_switch_port_L2P_get(src_port); + + for (i = 0; i <= RTL8367C_C2SIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &svidx)) != RT_ERR_OK) + return retVal; + + if (evid == vid) + { + if(pmsk & (1 << phyPort)) + { + pmsk = pmsk & ~(1 << phyPort); + if(pmsk == 0) + { + vid = 0; + svidx = 0; + } + + if ((retVal = rtl8367c_setAsicSvlanC2SConf(i, vid, pmsk, svidx)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; + } + } + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_c2s_get + * Description: + * Get configure SVLAN C2S table + * Input: + * vid - VLAN ID + * src_port - Ingress Port + * Output: + * pSvid - SVLAN ID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_PORT_ID - Invalid port ID. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can get system C2S configuration. There are 128 SVLAN C2S configurations. + */ +rtk_api_ret_t rtk_svlan_c2s_get(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t *pSvid) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtk_uint32 evid, pmsk, svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + rtk_port_t phyPort; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvid) + return RT_ERR_NULL_POINTER; + + if (vid > RTL8367C_VIDMAX) + return RT_ERR_VLAN_VID; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(src_port); + phyPort = rtk_switch_port_L2P_get(src_port); + + for (i = 0; i <= RTL8367C_C2SIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanC2SConf(i, &evid, &pmsk, &svidx)) != RT_ERR_OK) + return retVal; + + if (evid == vid) + { + if(pmsk & (1 << phyPort)) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + *pSvid = svlanMemConf.vs_svid; + return RT_ERR_OK; + } + } + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_untag_action_set + * Description: + * Configure Action of downstream UnStag packet + * Input: + * action - Action for UnStag + * svid - The SVID assigned to UnStag packet + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can configure action of downstream Un-Stag packet. A SVID assigned + * to the un-stag is also supported by this API. The parameter of svid is + * only referenced when the action is set to UNTAG_ASSIGN + */ +rtk_api_ret_t rtk_svlan_untag_action_set(rtk_svlan_untag_action_t action, rtk_vlan_t svid) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (action >= UNTAG_END) + return RT_ERR_OUT_OF_RANGE; + + if(action == UNTAG_ASSIGN) + { + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + } + + if ((retVal = rtl8367c_setAsicSvlanIngressUntag((rtk_uint32)action)) != RT_ERR_OK) + return retVal; + + if(action == UNTAG_ASSIGN) + { + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + if ((retVal = rtl8367c_setAsicSvlanUntagVlan(i)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; + } + } + + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + } + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_untag_action_get + * Description: + * Get Action of downstream UnStag packet + * Input: + * None + * Output: + * pAction - Action for UnStag + * pSvid - The SVID assigned to UnStag packet + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can Get action of downstream Un-Stag packet. A SVID assigned + * to the un-stag is also retrieved by this API. The parameter pSvid is + * only refernced when the action is UNTAG_ASSIGN + */ +rtk_api_ret_t rtk_svlan_untag_action_get(rtk_svlan_untag_action_t *pAction, rtk_vlan_t *pSvid) +{ + rtk_api_ret_t retVal; + rtk_uint32 svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pAction || NULL == pSvid) + return RT_ERR_NULL_POINTER; + + if ((retVal = rtl8367c_getAsicSvlanIngressUntag(pAction)) != RT_ERR_OK) + return retVal; + + if(*pAction == UNTAG_ASSIGN) + { + if ((retVal = rtl8367c_getAsicSvlanUntagVlan(&svidx)) != RT_ERR_OK) + return retVal; + + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + *pSvid = svlanMemConf.vs_svid; + } + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_unmatch_action_set + * Description: + * Configure Action of downstream Unmatch packet + * Input: + * action - Action for Unmatch + * svid - The SVID assigned to Unmatch packet + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can configure action of downstream Un-match packet. A SVID assigned + * to the un-match is also supported by this API. The parameter od svid is + * only refernced when the action is set to UNMATCH_ASSIGN + */ +rtk_api_ret_t rtk_svlan_unmatch_action_set(rtk_svlan_unmatch_action_t action, rtk_vlan_t svid) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (action >= UNMATCH_END) + return RT_ERR_OUT_OF_RANGE; + + if (action == UNMATCH_ASSIGN) + { + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + } + + if ((retVal = rtl8367c_setAsicSvlanIngressUnmatch((rtk_uint32)action)) != RT_ERR_OK) + return retVal; + + if(action == UNMATCH_ASSIGN) + { + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + if ((retVal = rtl8367c_setAsicSvlanUnmatchVlan(i)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; + } + } + + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + } + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_unmatch_action_get + * Description: + * Get Action of downstream Unmatch packet + * Input: + * None + * Output: + * pAction - Action for Unmatch + * pSvid - The SVID assigned to Unmatch packet + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can Get action of downstream Un-match packet. A SVID assigned + * to the un-match is also retrieved by this API. The parameter pSvid is + * only refernced when the action is UNMATCH_ASSIGN + */ +rtk_api_ret_t rtk_svlan_unmatch_action_get(rtk_svlan_unmatch_action_t *pAction, rtk_vlan_t *pSvid) +{ + rtk_api_ret_t retVal; + rtk_uint32 svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pAction || NULL == pSvid) + return RT_ERR_NULL_POINTER; + + if ((retVal = rtl8367c_getAsicSvlanIngressUnmatch(pAction)) != RT_ERR_OK) + return retVal; + + if(*pAction == UNMATCH_ASSIGN) + { + if ((retVal = rtl8367c_getAsicSvlanUnmatchVlan(&svidx)) != RT_ERR_OK) + return retVal; + + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svidx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + *pSvid = svlanMemConf.vs_svid; + } + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_unassign_action_set + * Description: + * Configure Action of upstream without svid assign action + * Input: + * action - Action for Un-assign + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can configure action of upstream Un-assign svid packet. If action is not + * trap to CPU, the port-based SVID sure be assign as system need + */ +rtk_api_ret_t rtk_svlan_unassign_action_set(rtk_svlan_unassign_action_t action) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (action >= UNASSIGN_END) + return RT_ERR_OUT_OF_RANGE; + + retVal = rtl8367c_setAsicSvlanEgressUnassign((rtk_uint32)action); + + return retVal; +} + +/* Function Name: + * rtk_svlan_unassign_action_get + * Description: + * Get action of upstream without svid assignment + * Input: + * None + * Output: + * pAction - Action for Un-assign + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * Note: + * None + */ +rtk_api_ret_t rtk_svlan_unassign_action_get(rtk_svlan_unassign_action_t *pAction) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pAction) + return RT_ERR_NULL_POINTER; + + retVal = rtl8367c_getAsicSvlanEgressUnassign(pAction); + + return retVal; +} + +/* Function Name: + * rtk_svlan_dmac_vidsel_set + * Description: + * Set DMAC CVID selection + * Input: + * port - Port + * enable - state of DMAC CVID Selection + * Output: + * None. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * This API can set DMAC CVID Selection state + */ +rtk_api_ret_t rtk_svlan_dmac_vidsel_set(rtk_port_t port, rtk_enable_t enable) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + /* Check port Valid */ + RTK_CHK_PORT_VALID(port); + + if (enable >= RTK_ENABLE_END) + return RT_ERR_ENABLE; + + if ((retVal = rtl8367c_setAsicSvlanDmacCvidSel(rtk_switch_port_L2P_get(port), enable)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_dmac_vidsel_get + * Description: + * Get DMAC CVID selection + * Input: + * port - Port + * Output: + * pEnable - state of DMAC CVID Selection + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * This API can get DMAC CVID Selection state + */ +rtk_api_ret_t rtk_svlan_dmac_vidsel_get(rtk_port_t port, rtk_enable_t *pEnable) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pEnable) + return RT_ERR_NULL_POINTER; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(port); + + if ((retVal = rtl8367c_getAsicSvlanDmacCvidSel(rtk_switch_port_L2P_get(port), pEnable)) != RT_ERR_OK) + return retVal; + + return RT_ERR_OK; +} + +/* Function Name: + * rtk_svlan_ipmc2s_add + * Description: + * add ip multicast address to SVLAN + * Input: + * svid - SVLAN VID + * ipmc - ip multicast address + * ipmcMsk - ip multicast mask + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can set IP mutlicast to SVID configuration. If upstream packet is IPv4 multicast + * packet and DIP is matched MC2S configuration, ASIC will assign egress SVID to the packet. + * There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +rtk_api_ret_t rtk_svlan_ipmc2s_add(ipaddr_t ipmc, ipaddr_t ipmcMsk,rtk_vlan_t svid) +{ + rtk_api_ret_t retVal, i; + rtk_uint32 empty_idx; + rtk_uint32 svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_mc2s_t svlanMC2SConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + if ((ipmc&0xF0000000)!=0xE0000000) + return RT_ERR_INPUT; + + svidx = 0xFFFF; + + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + svidx = i; + break; + } + } + + if (0xFFFF == svidx) + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + + + empty_idx = 0xFFFF; + + for (i = RTL8367C_MC2SIDXMAX; i >= 0; i--) + { + if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + + if (TRUE == svlanMC2SConf.valid) + { + if (svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && + svlanMC2SConf.sdata==ipmc&& + svlanMC2SConf.smask==ipmcMsk) + { + svlanMC2SConf.svidx = svidx; + if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + } + } + else + { + empty_idx = i; + } + } + + if (empty_idx!=0xFFFF) + { + svlanMC2SConf.valid = TRUE; + svlanMC2SConf.svidx = svidx; + svlanMC2SConf.format = SVLAN_MC2S_MODE_IP; + svlanMC2SConf.sdata = ipmc; + svlanMC2SConf.smask = ipmcMsk; + if ((retVal = rtl8367c_setAsicSvlanMC2SConf(empty_idx, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + return RT_ERR_OK; + } + + return RT_ERR_OUT_OF_RANGE; + +} + +/* Function Name: + * rtk_svlan_ipmc2s_del + * Description: + * delete ip multicast address to SVLAN + * Input: + * ipmc - ip multicast address + * ipmcMsk - ip multicast mask + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +rtk_api_ret_t rtk_svlan_ipmc2s_del(ipaddr_t ipmc, ipaddr_t ipmcMsk) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtl8367c_svlan_mc2s_t svlanMC2SConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if ((ipmc&0xF0000000)!=0xE0000000) + return RT_ERR_INPUT; + + for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + + if (TRUE == svlanMC2SConf.valid) + { + if (svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && + svlanMC2SConf.sdata==ipmc&& + svlanMC2SConf.smask==ipmcMsk) + { + memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); + if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + return RT_ERR_OK; + } + } + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_ipmc2s_get + * Description: + * Get ip multicast address to SVLAN + * Input: + * ipmc - ip multicast address + * ipmcMsk - ip multicast mask + * Output: + * pSvid - SVLAN VID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can get IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +rtk_api_ret_t rtk_svlan_ipmc2s_get(ipaddr_t ipmc, ipaddr_t ipmcMsk, rtk_vlan_t *pSvid) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_mc2s_t svlanMC2SConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvid) + return RT_ERR_NULL_POINTER; + + if ((ipmc&0xF0000000)!=0xE0000000) + return RT_ERR_INPUT; + + for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + + if (TRUE == svlanMC2SConf.valid && + svlanMC2SConf.format == SVLAN_MC2S_MODE_IP && + svlanMC2SConf.sdata == ipmc && + svlanMC2SConf.smask == ipmcMsk) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svlanMC2SConf.svidx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + *pSvid = svlanMemConf.vs_svid; + return RT_ERR_OK; + } + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_l2mc2s_add + * Description: + * Add L2 multicast address to SVLAN + * Input: + * mac - L2 multicast address + * macMsk - L2 multicast address mask + * svid - SVLAN VID + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can set L2 Mutlicast to SVID configuration. If upstream packet is L2 multicast + * packet and DMAC is matched, ASIC will assign egress SVID to the packet. There are 32 + * SVLAN multicast configurations for IP and L2 multicast. + */ +rtk_api_ret_t rtk_svlan_l2mc2s_add(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t svid) +{ + rtk_api_ret_t retVal, i; + rtk_uint32 empty_idx; + rtk_uint32 svidx, l2add, l2Mask; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_mc2s_t svlanMC2SConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + if (mac.octet[0]!= 1&&mac.octet[1]!=0) + return RT_ERR_INPUT; + + l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; + l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; + + svidx = 0xFFFF; + + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + svidx = i; + break; + } + } + + if (0xFFFF == svidx) + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + + empty_idx = 0xFFFF; + + for (i = RTL8367C_MC2SIDXMAX; i >=0; i--) + { + if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + + if (TRUE == svlanMC2SConf.valid) + { + if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && + svlanMC2SConf.sdata==l2add&& + svlanMC2SConf.smask==l2Mask) + { + svlanMC2SConf.svidx = svidx; + if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + } + } + else + { + empty_idx = i; + } + } + + if (empty_idx!=0xFFFF) + { + svlanMC2SConf.valid = TRUE; + svlanMC2SConf.svidx = svidx; + svlanMC2SConf.format = SVLAN_MC2S_MODE_MAC; + svlanMC2SConf.sdata = l2add; + svlanMC2SConf.smask = l2Mask; + + if ((retVal = rtl8367c_setAsicSvlanMC2SConf(empty_idx, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + return RT_ERR_OK; + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_l2mc2s_del + * Description: + * delete L2 multicast address to SVLAN + * Input: + * mac - L2 multicast address + * macMsk - L2 multicast address mask + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete Mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +rtk_api_ret_t rtk_svlan_l2mc2s_del(rtk_mac_t mac, rtk_mac_t macMsk) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtk_uint32 l2add, l2Mask; + rtl8367c_svlan_mc2s_t svlanMC2SConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (mac.octet[0]!= 1&&mac.octet[1]!=0) + return RT_ERR_INPUT; + + l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; + l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; + + for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + + if (TRUE == svlanMC2SConf.valid) + { + if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && + svlanMC2SConf.sdata==l2add&& + svlanMC2SConf.smask==l2Mask) + { + memset(&svlanMC2SConf, 0, sizeof(rtl8367c_svlan_mc2s_t)); + if ((retVal = rtl8367c_setAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + return RT_ERR_OK; + } + } + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_l2mc2s_get + * Description: + * Get L2 multicast address to SVLAN + * Input: + * mac - L2 multicast address + * macMsk - L2 multicast address mask + * Output: + * pSvid - SVLAN VID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can get L2 mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +rtk_api_ret_t rtk_svlan_l2mc2s_get(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t *pSvid) +{ + rtk_api_ret_t retVal; + rtk_uint32 i; + rtk_uint32 l2add,l2Mask; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_mc2s_t svlanMC2SConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pSvid) + return RT_ERR_NULL_POINTER; + + if (mac.octet[0]!= 1&&mac.octet[1]!=0) + return RT_ERR_INPUT; + + l2add = (mac.octet[2] << 24) | (mac.octet[3] << 16) | (mac.octet[4] << 8) | mac.octet[5]; + l2Mask = (macMsk.octet[2] << 24) | (macMsk.octet[3] << 16) | (macMsk.octet[4] << 8) | macMsk.octet[5]; + + for (i = 0; i <= RTL8367C_MC2SIDXMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMC2SConf(i, &svlanMC2SConf)) != RT_ERR_OK) + return retVal; + + if (TRUE == svlanMC2SConf.valid) + { + if (svlanMC2SConf.format == SVLAN_MC2S_MODE_MAC && + svlanMC2SConf.sdata==l2add&& + svlanMC2SConf.smask==l2Mask) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(svlanMC2SConf.svidx, &svlanMemConf)) != RT_ERR_OK) + return retVal; + *pSvid = svlanMemConf.vs_svid; + + return RT_ERR_OK; + } + } + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_sp2c_add + * Description: + * Add system SP2C configuration + * Input: + * cvid - VLAN ID + * dst_port - Destination port of SVLAN to CVLAN configuration + * svid - SVLAN VID + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_VLAN_VID - Invalid VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can add SVID & Destination Port to CVLAN configuration. The downstream frames with assigned + * SVID will be add C-tag with assigned CVID if the output port is the assigned destination port. + * There are 128 SP2C configurations. + */ +rtk_api_ret_t rtk_svlan_sp2c_add(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t cvid) +{ + rtk_api_ret_t retVal, i; + rtk_uint32 empty_idx, svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_s2c_t svlanSP2CConf; + rtk_port_t port; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + if (cvid > RTL8367C_VIDMAX) + return RT_ERR_VLAN_VID; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(dst_port); + port = rtk_switch_port_L2P_get(dst_port); + + svidx = 0xFFFF; + + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + svidx = i; + break; + } + } + + if (0xFFFF == svidx) + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + + empty_idx = 0xFFFF; + + for (i=RTL8367C_SP2CMAX; i >=0 ; i--) + { + if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) + return retVal; + + if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == port) && (svlanSP2CConf.valid == 1)) + { + empty_idx = i; + break; + } + else if (svlanSP2CConf.valid == 0) + { + empty_idx = i; + } + } + + if (empty_idx!=0xFFFF) + { + svlanSP2CConf.valid = 1; + svlanSP2CConf.vid = cvid; + svlanSP2CConf.svidx = svidx; + svlanSP2CConf.dstport = port; + + if ((retVal = rtl8367c_setAsicSvlanSP2CConf(empty_idx, &svlanSP2CConf)) != RT_ERR_OK) + return retVal; + return RT_ERR_OK; + } + + return RT_ERR_OUT_OF_RANGE; + +} + +/* Function Name: + * rtk_svlan_sp2c_get + * Description: + * Get configure system SP2C content + * Input: + * svid - SVLAN VID + * dst_port - Destination port of SVLAN to CVLAN configuration + * Output: + * pCvid - VLAN ID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * Note: + * The API can get SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. + */ +rtk_api_ret_t rtk_svlan_sp2c_get(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t *pCvid) +{ + rtk_api_ret_t retVal; + rtk_uint32 i, svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_s2c_t svlanSP2CConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pCvid) + return RT_ERR_NULL_POINTER; + + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(dst_port); + dst_port = rtk_switch_port_L2P_get(dst_port); + + svidx = 0xFFFF; + + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + svidx = i; + break; + } + } + + if (0xFFFF == svidx) + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + + for (i = 0; i <= RTL8367C_SP2CMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) + return retVal; + + if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == dst_port) && (svlanSP2CConf.valid == 1) ) + { + *pCvid = svlanSP2CConf.vid; + return RT_ERR_OK; + } + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_sp2c_del + * Description: + * Delete system SP2C configuration + * Input: + * svid - SVLAN VID + * dst_port - Destination port of SVLAN to CVLAN configuration + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. + */ +rtk_api_ret_t rtk_svlan_sp2c_del(rtk_vlan_t svid, rtk_port_t dst_port) +{ + rtk_api_ret_t retVal; + rtk_uint32 i, svidx; + rtl8367c_svlan_memconf_t svlanMemConf; + rtl8367c_svlan_s2c_t svlanSP2CConf; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (svid > RTL8367C_VIDMAX) + return RT_ERR_SVLAN_VID; + + /* Check port Valid */ + RTK_CHK_PORT_VALID(dst_port); + dst_port = rtk_switch_port_L2P_get(dst_port); + + svidx = 0xFFFF; + + for (i = 0; i < RTL8367C_SVIDXNO; i++) + { + if ((retVal = rtl8367c_getAsicSvlanMemberConfiguration(i, &svlanMemConf)) != RT_ERR_OK) + return retVal; + + if (svid == svlanMemConf.vs_svid) + { + svidx = i; + break; + } + } + + if (0xFFFF == svidx) + return RT_ERR_SVLAN_ENTRY_NOT_FOUND; + + for (i = 0; i <= RTL8367C_SP2CMAX; i++) + { + if ((retVal = rtl8367c_getAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) + return retVal; + + if ( (svlanSP2CConf.svidx == svidx) && (svlanSP2CConf.dstport == dst_port) && (svlanSP2CConf.valid == 1) ) + { + svlanSP2CConf.valid = 0; + svlanSP2CConf.vid = 0; + svlanSP2CConf.svidx = 0; + svlanSP2CConf.dstport = 0; + + if ((retVal = rtl8367c_setAsicSvlanSP2CConf(i, &svlanSP2CConf)) != RT_ERR_OK) + return retVal; + return RT_ERR_OK; + } + + } + + return RT_ERR_OUT_OF_RANGE; +} + +/* Function Name: + * rtk_svlan_lookupType_set + * Description: + * Set lookup type of SVLAN + * Input: + * type - lookup type + * Output: + * None + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * Note: + * none + */ +rtk_api_ret_t rtk_svlan_lookupType_set(rtk_svlan_lookupType_t type) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if (type >= SVLAN_LOOKUP_END) + return RT_ERR_CHIP_NOT_SUPPORTED; + + + svlan_lookupType = type; + + retVal = rtl8367c_setAsicSvlanLookupType((rtk_uint32)type); + + return retVal; +} + +/* Function Name: + * rtk_svlan_lookupType_get + * Description: + * Get lookup type of SVLAN + * Input: + * pType - lookup type + * Output: + * None + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * Note: + * none + */ +rtk_api_ret_t rtk_svlan_lookupType_get(rtk_svlan_lookupType_t *pType) +{ + rtk_api_ret_t retVal; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + if(NULL == pType) + return RT_ERR_NULL_POINTER; + + retVal = rtl8367c_getAsicSvlanLookupType(pType); + + svlan_lookupType = *pType; + + return retVal; +} + +/* Function Name: + * rtk_svlan_trapPri_set + * Description: + * Set svlan trap priority + * Input: + * priority - priority for trap packets + * Output: + * None + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * RT_ERR_QOS_INT_PRIORITY + * Note: + * None + */ +rtk_api_ret_t rtk_svlan_trapPri_set(rtk_pri_t priority) +{ + rtk_api_ret_t retVal; + + RTK_CHK_INIT_STATE(); + + if(priority > RTL8367C_PRIMAX) + return RT_ERR_OUT_OF_RANGE; + + retVal = rtl8367c_setAsicSvlanTrapPriority(priority); + + return retVal; +} /* end of rtk_svlan_trapPri_set */ + +/* Function Name: + * rtk_svlan_trapPri_get + * Description: + * Get svlan trap priority + * Input: + * None + * Output: + * pPriority - priority for trap packets + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * RT_ERR_NULL_POINTER - input parameter may be null pointer + * Note: + * None + */ +rtk_api_ret_t rtk_svlan_trapPri_get(rtk_pri_t *pPriority) +{ + rtk_api_ret_t retVal; + + RTK_CHK_INIT_STATE(); + + if(NULL == pPriority) + return RT_ERR_NULL_POINTER; + + retVal = rtl8367c_getAsicSvlanTrapPriority(pPriority); + + return retVal; +} /* end of rtk_svlan_trapPri_get */ + + +/* Function Name: + * rtk_svlan_checkAndCreateMbr + * Description: + * Check and create Member configuration and return index + * Input: + * vid - VLAN id. + * Output: + * pIndex - Member configuration index + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_VLAN_VID - Invalid VLAN ID. + * RT_ERR_TBL_FULL - Member Configuration table full + * Note: + * + */ +rtk_api_ret_t rtk_svlan_checkAndCreateMbr(rtk_vlan_t vid, rtk_uint32 *pIndex) +{ + rtk_api_ret_t retVal; + rtk_uint32 svidx; + rtk_uint32 empty_idx = 0xFFFF; + rtl8367c_svlan_memconf_t svlan_cfg; + + /* Check initialization state */ + RTK_CHK_INIT_STATE(); + + /* vid must be 0~4095 */ + if (vid > RTL8367C_VIDMAX) + return RT_ERR_VLAN_VID; + + /* Null pointer check */ + if(NULL == pIndex) + return RT_ERR_NULL_POINTER; + + /* Search exist entry */ + for (svidx = 0; svidx <= RTL8367C_SVIDXMAX; svidx++) + { + if(svlan_mbrCfgUsage[svidx] == TRUE) + { + if(svlan_mbrCfgVid[svidx] == vid) + { + /* Found! return index */ + *pIndex = svidx; + return RT_ERR_OK; + } + } + else if(empty_idx == 0xFFFF) + { + empty_idx = svidx; + } + + } + + if(empty_idx == 0xFFFF) + { + /* No empty index */ + return RT_ERR_TBL_FULL; + } + + svlan_mbrCfgUsage[empty_idx] = TRUE; + svlan_mbrCfgVid[empty_idx] = vid; + + memset(&svlan_cfg, 0, sizeof(rtl8367c_svlan_memconf_t)); + + svlan_cfg.vs_svid = vid; + /*for create check*/ + if(vid == 0) + { + svlan_cfg.vs_efid = 1; + } + + if((retVal = rtl8367c_setAsicSvlanMemberConfiguration(empty_idx, &svlan_cfg)) != RT_ERR_OK) + return retVal; + + *pIndex = empty_idx; + return RT_ERR_OK; +} + |