diff options
Diffstat (limited to 'target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/svlan.h')
-rw-r--r-- | target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/svlan.h | 896 |
1 files changed, 896 insertions, 0 deletions
diff --git a/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/svlan.h b/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/svlan.h new file mode 100644 index 0000000000..bcdb02f41d --- /dev/null +++ b/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/svlan.h @@ -0,0 +1,896 @@ +/* + * Copyright (C) 2013 Realtek Semiconductor Corp. + * All Rights Reserved. + * + * Unless you and Realtek execute a separate written software license + * agreement governing use of this software, this software is licensed + * to you under the terms of the GNU General Public License version 2, + * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt + * + * Purpose : RTL8367/RTL8367C switch high-level API + * + * Feature : The file includes SVLAN module high-layer API defination + * + */ + +#ifndef __RTK_API_SVLAN_H__ +#define __RTK_API_SVLAN_H__ + +typedef rtk_uint32 rtk_svlan_index_t; + +typedef struct rtk_svlan_memberCfg_s{ + rtk_uint32 svid; + rtk_portmask_t memberport; + rtk_portmask_t untagport; + rtk_uint32 fiden; + rtk_uint32 fid; + rtk_uint32 priority; + rtk_uint32 efiden; + rtk_uint32 efid; +}rtk_svlan_memberCfg_t; + +typedef enum rtk_svlan_pri_ref_e +{ + REF_INTERNAL_PRI = 0, + REF_CTAG_PRI, + REF_SVLAN_PRI, + REF_PB_PRI, + REF_PRI_END +} rtk_svlan_pri_ref_t; + + +typedef rtk_uint32 rtk_svlan_tpid_t; + +typedef enum rtk_svlan_untag_action_e +{ + UNTAG_DROP = 0, + UNTAG_TRAP, + UNTAG_ASSIGN, + UNTAG_END +} rtk_svlan_untag_action_t; + +typedef enum rtk_svlan_unmatch_action_e +{ + UNMATCH_DROP = 0, + UNMATCH_TRAP, + UNMATCH_ASSIGN, + UNMATCH_END +} rtk_svlan_unmatch_action_t; + +typedef enum rtk_svlan_unassign_action_e +{ + UNASSIGN_PBSVID = 0, + UNASSIGN_TRAP, + UNASSIGN_END +} rtk_svlan_unassign_action_t; + + +typedef enum rtk_svlan_lookupType_e +{ + SVLAN_LOOKUP_S64MBRCGF = 0, + SVLAN_LOOKUP_C4KVLAN, + SVLAN_LOOKUP_END, + +} rtk_svlan_lookupType_t; + +/* Function Name: + * rtk_svlan_init + * Description: + * Initialize SVLAN Configuration + * Input: + * None + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 for Q-in-Q SLAN design. + * User can set mathced ether type as service provider supported protocol. + */ +extern rtk_api_ret_t rtk_svlan_init(void); + +/* Function Name: + * rtk_svlan_servicePort_add + * Description: + * Add one service port in the specified device + * Input: + * port - Port id. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * This API is setting which port is connected to provider switch. All frames receiving from this port must + * contain accept SVID in S-tag field. + */ +extern rtk_api_ret_t rtk_svlan_servicePort_add(rtk_port_t port); + +/* Function Name: + * rtk_svlan_servicePort_get + * Description: + * Get service ports in the specified device. + * Input: + * None + * Output: + * pSvlan_portmask - pointer buffer of svlan ports. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * This API is setting which port is connected to provider switch. All frames receiving from this port must + * contain accept SVID in S-tag field. + */ +extern rtk_api_ret_t rtk_svlan_servicePort_get(rtk_portmask_t *pSvlan_portmask); + +/* Function Name: + * rtk_svlan_servicePort_del + * Description: + * Delete one service port in the specified device + * Input: + * port - Port id. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * Note: + * This API is removing SVLAN service port in the specified device. + */ +extern rtk_api_ret_t rtk_svlan_servicePort_del(rtk_port_t port); + +/* Function Name: + * rtk_svlan_tpidEntry_set + * Description: + * Configure accepted S-VLAN ether type. + * Input: + * svlan_tag_id - Ether type of S-tag frame parsing in uplink ports. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * Note: + * Ether type of S-tag in 802.1ad is 0x88a8 and there are existed ether type 0x9100 and 0x9200 for Q-in-Q SLAN design. + * User can set mathced ether type as service provider supported protocol. + */ +extern rtk_api_ret_t rtk_svlan_tpidEntry_set(rtk_uint32 svlan_tag_id); + +/* Function Name: + * rtk_svlan_tpidEntry_get + * Description: + * Get accepted S-VLAN ether type setting. + * Input: + * None + * Output: + * pSvlan_tag_id - Ether type of S-tag frame parsing in uplink ports. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * This API is setting which port is connected to provider switch. All frames receiving from this port must + * contain accept SVID in S-tag field. + */ +extern rtk_api_ret_t rtk_svlan_tpidEntry_get(rtk_uint32 *pSvlan_tag_id); + +/* Function Name: + * rtk_svlan_priorityRef_set + * Description: + * Set S-VLAN upstream priority reference setting. + * Input: + * ref - reference selection parameter. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * Note: + * The API can set the upstream SVLAN tag priority reference source. The related priority + * sources are as following: + * - REF_INTERNAL_PRI, + * - REF_CTAG_PRI, + * - REF_SVLAN_PRI, + * - REF_PB_PRI. + */ +extern rtk_api_ret_t rtk_svlan_priorityRef_set(rtk_svlan_pri_ref_t ref); + +/* Function Name: + * rtk_svlan_priorityRef_get + * Description: + * Get S-VLAN upstream priority reference setting. + * Input: + * None + * Output: + * pRef - reference selection parameter. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * The API can get the upstream SVLAN tag priority reference source. The related priority + * sources are as following: + * - REF_INTERNAL_PRI, + * - REF_CTAG_PRI, + * - REF_SVLAN_PRI, + * - REF_PB_PRI + */ +extern rtk_api_ret_t rtk_svlan_priorityRef_get(rtk_svlan_pri_ref_t *pRef); + +/* Function Name: + * rtk_svlan_memberPortEntry_set + * Description: + * Configure system SVLAN member content + * Input: + * svid - SVLAN id + * psvlan_cfg - SVLAN member configuration + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_PORT_MASK - Invalid portmask. + * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. + * Note: + * The API can set system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted + * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped by default setup. + * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. + */ +extern rtk_api_ret_t rtk_svlan_memberPortEntry_set(rtk_uint32 svid_idx, rtk_svlan_memberCfg_t *psvlan_cfg); + +/* Function Name: + * rtk_svlan_memberPortEntry_get + * Description: + * Get SVLAN member Configure. + * Input: + * svid - SVLAN id + * Output: + * pSvlan_cfg - SVLAN member configuration + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted + * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. + */ +extern rtk_api_ret_t rtk_svlan_memberPortEntry_get(rtk_uint32 svid_idx, rtk_svlan_memberCfg_t *pSvlan_cfg); + +/* Function Name: + * rtk_svlan_memberPortEntry_adv_set + * Description: + * Configure system SVLAN member by index + * Input: + * idx - Index (0 ~ 63) + * psvlan_cfg - SVLAN member configuration + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_PORT_MASK - Invalid portmask. + * RT_ERR_SVLAN_TABLE_FULL - SVLAN configuration is full. + * Note: + * The API can set system 64 accepted s-tag frame format by index. + * - rtk_svlan_memberCfg_t->svid is SVID of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->memberport is member port mask of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->fid is filtering database of SVLAN member configuration. + * - rtk_svlan_memberCfg_t->priority is priority of SVLAN member configuration. + */ +extern rtk_api_ret_t rtk_svlan_memberPortEntry_adv_set(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg); + +/* Function Name: + * rtk_svlan_memberPortEntry_adv_get + * Description: + * Get SVLAN member Configure by index. + * Input: + * idx - Index (0 ~ 63) + * Output: + * pSvlan_cfg - SVLAN member configuration + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get system 64 accepted s-tag frame format. Only 64 SVID S-tag frame will be accpeted + * to receiving from uplink ports. Other SVID S-tag frame or S-untagged frame will be droped. + */ +extern rtk_api_ret_t rtk_svlan_memberPortEntry_adv_get(rtk_uint32 idx, rtk_svlan_memberCfg_t *pSvlan_cfg); + +/* Function Name: + * rtk_svlan_defaultSvlan_set + * Description: + * Configure default egress SVLAN. + * Input: + * port - Source port + * svid - SVLAN id + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameter. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * Note: + * The API can set port n S-tag format index while receiving frame from port n + * is transmit through uplink port with s-tag field + */ +extern rtk_api_ret_t rtk_svlan_defaultSvlan_set(rtk_port_t port, rtk_vlan_t svid); + +/* Function Name: + * rtk_svlan_defaultSvlan_get + * Description: + * Get the configure default egress SVLAN. + * Input: + * port - Source port + * Output: + * pSvid - SVLAN VID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get port n S-tag format index while receiving frame from port n + * is transmit through uplink port with s-tag field + */ +extern rtk_api_ret_t rtk_svlan_defaultSvlan_get(rtk_port_t port, rtk_vlan_t *pSvid); + +/* Function Name: + * rtk_svlan_c2s_add + * Description: + * Configure SVLAN C2S table + * Input: + * vid - VLAN ID + * src_port - Ingress Port + * svid - SVLAN VID + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port ID. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_VLAN_VID - Invalid VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can set system C2S configuration. ASIC will check upstream's VID and assign related + * SVID to mathed packet. There are 128 SVLAN C2S configurations. + */ +extern rtk_api_ret_t rtk_svlan_c2s_add(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t svid); + +/* Function Name: + * rtk_svlan_c2s_del + * Description: + * Delete one C2S entry + * Input: + * vid - VLAN ID + * src_port - Ingress Port + * svid - SVLAN VID + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_VLAN_VID - Invalid VID parameter. + * RT_ERR_PORT_ID - Invalid port ID. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete system C2S configuration. There are 128 SVLAN C2S configurations. + */ +extern rtk_api_ret_t rtk_svlan_c2s_del(rtk_vlan_t vid, rtk_port_t src_port); + +/* Function Name: + * rtk_svlan_c2s_get + * Description: + * Get configure SVLAN C2S table + * Input: + * vid - VLAN ID + * src_port - Ingress Port + * Output: + * pSvid - SVLAN ID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_PORT_ID - Invalid port ID. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can get system C2S configuration. There are 128 SVLAN C2S configurations. + */ +extern rtk_api_ret_t rtk_svlan_c2s_get(rtk_vlan_t vid, rtk_port_t src_port, rtk_vlan_t *pSvid); + +/* Function Name: + * rtk_svlan_untag_action_set + * Description: + * Configure Action of downstream Un-Stag packet + * Input: + * action - Action for UnStag + * svid - The SVID assigned to UnStag packet + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can configure action of downstream Un-Stag packet. A SVID assigned + * to the un-stag is also supported by this API. The parameter of svid is + * only referenced when the action is set to UNTAG_ASSIGN + */ +extern rtk_api_ret_t rtk_svlan_untag_action_set(rtk_svlan_untag_action_t action, rtk_vlan_t svid); + +/* Function Name: + * rtk_svlan_untag_action_get + * Description: + * Get Action of downstream Un-Stag packet + * Input: + * None + * Output: + * pAction - Action for UnStag + * pSvid - The SVID assigned to UnStag packet + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can Get action of downstream Un-Stag packet. A SVID assigned + * to the un-stag is also retrieved by this API. The parameter pSvid is + * only refernced when the action is UNTAG_ASSIGN + */ +extern rtk_api_ret_t rtk_svlan_untag_action_get(rtk_svlan_untag_action_t *pAction, rtk_vlan_t *pSvid); + +/* Function Name: + * rtk_svlan_unmatch_action_set + * Description: + * Configure Action of downstream Unmatch packet + * Input: + * action - Action for Unmatch + * svid - The SVID assigned to Unmatch packet + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can configure action of downstream Un-match packet. A SVID assigned + * to the un-match is also supported by this API. The parameter od svid is + * only refernced when the action is set to UNMATCH_ASSIGN + */ +extern rtk_api_ret_t rtk_svlan_unmatch_action_set(rtk_svlan_unmatch_action_t action, rtk_vlan_t svid); + +/* Function Name: + * rtk_svlan_unmatch_action_get + * Description: + * Get Action of downstream Unmatch packet + * Input: + * None + * Output: + * pAction - Action for Unmatch + * pSvid - The SVID assigned to Unmatch packet + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can Get action of downstream Un-match packet. A SVID assigned + * to the un-match is also retrieved by this API. The parameter pSvid is + * only refernced when the action is UNMATCH_ASSIGN + */ +extern rtk_api_ret_t rtk_svlan_unmatch_action_get(rtk_svlan_unmatch_action_t *pAction, rtk_vlan_t *pSvid); + +/* Function Name: + * rtk_svlan_dmac_vidsel_set + * Description: + * Set DMAC CVID selection + * Input: + * port - Port + * enable - state of DMAC CVID Selection + * Output: + * None. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * This API can set DMAC CVID Selection state + */ +extern rtk_api_ret_t rtk_svlan_dmac_vidsel_set(rtk_port_t port, rtk_enable_t enable); + +/* Function Name: + * rtk_svlan_dmac_vidsel_get + * Description: + * Get DMAC CVID selection + * Input: + * port - Port + * Output: + * pEnable - state of DMAC CVID Selection + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * This API can get DMAC CVID Selection state + */ +extern rtk_api_ret_t rtk_svlan_dmac_vidsel_get(rtk_port_t port, rtk_enable_t *pEnable); + +/* Function Name: + * rtk_svlan_ipmc2s_add + * Description: + * add ip multicast address to SVLAN + * Input: + * svid - SVLAN VID + * ipmc - ip multicast address + * ipmcMsk - ip multicast mask + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can set IP mutlicast to SVID configuration. If upstream packet is IPv4 multicast + * packet and DIP is matched MC2S configuration, ASIC will assign egress SVID to the packet. + * There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +extern rtk_api_ret_t rtk_svlan_ipmc2s_add(ipaddr_t ipmc, ipaddr_t ipmcMsk, rtk_vlan_t svid); + +/* Function Name: + * rtk_svlan_ipmc2s_del + * Description: + * delete ip multicast address to SVLAN + * Input: + * ipmc - ip multicast address + * ipmcMsk - ip multicast mask + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +extern rtk_api_ret_t rtk_svlan_ipmc2s_del(ipaddr_t ipmc, ipaddr_t ipmcMsk); + +/* Function Name: + * rtk_svlan_ipmc2s_get + * Description: + * Get ip multicast address to SVLAN + * Input: + * ipmc - ip multicast address + * ipmcMsk - ip multicast mask + * Output: + * pSvid - SVLAN VID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can get IP mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +extern rtk_api_ret_t rtk_svlan_ipmc2s_get(ipaddr_t ipmc, ipaddr_t ipmcMsk, rtk_vlan_t *pSvid); + +/* Function Name: + * rtk_svlan_l2mc2s_add + * Description: + * Add L2 multicast address to SVLAN + * Input: + * mac - L2 multicast address + * macMsk - L2 multicast address mask + * svid - SVLAN VID + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_SVLAN_ENTRY_NOT_FOUND - specified svlan entry not found. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can set L2 Mutlicast to SVID configuration. If upstream packet is L2 multicast + * packet and DMAC is matched, ASIC will assign egress SVID to the packet. There are 32 + * SVLAN multicast configurations for IP and L2 multicast. + */ +extern rtk_api_ret_t rtk_svlan_l2mc2s_add(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t svid); + +/* Function Name: + * rtk_svlan_l2mc2s_del + * Description: + * delete L2 multicast address to SVLAN + * Input: + * mac - L2 multicast address + * macMsk - L2 multicast address mask + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete Mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +extern rtk_api_ret_t rtk_svlan_l2mc2s_del(rtk_mac_t mac, rtk_mac_t macMsk); + +/* Function Name: + * rtk_svlan_l2mc2s_get + * Description: + * Get L2 multicast address to SVLAN + * Input: + * mac - L2 multicast address + * macMsk - L2 multicast address mask + * Output: + * pSvid - SVLAN VID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can get L2 mutlicast to SVID configuration. There are 32 SVLAN multicast configurations for IP and L2 multicast. + */ +extern rtk_api_ret_t rtk_svlan_l2mc2s_get(rtk_mac_t mac, rtk_mac_t macMsk, rtk_vlan_t *pSvid); + +/* Function Name: + * rtk_svlan_sp2c_add + * Description: + * Add system SP2C configuration + * Input: + * cvid - VLAN ID + * dst_port - Destination port of SVLAN to CVLAN configuration + * svid - SVLAN VID + * + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_VLAN_VID - Invalid VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can add SVID & Destination Port to CVLAN configuration. The downstream frames with assigned + * SVID will be add C-tag with assigned CVID if the output port is the assigned destination port. + * There are 128 SP2C configurations. + */ +extern rtk_api_ret_t rtk_svlan_sp2c_add(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t cvid); + +/* Function Name: + * rtk_svlan_sp2c_get + * Description: + * Get configure system SP2C content + * Input: + * svid - SVLAN VID + * dst_port - Destination port of SVLAN to CVLAN configuration + * Output: + * pCvid - VLAN ID + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * Note: + * The API can get SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. + */ +extern rtk_api_ret_t rtk_svlan_sp2c_get(rtk_vlan_t svid, rtk_port_t dst_port, rtk_vlan_t *pCvid); + +/* Function Name: + * rtk_svlan_sp2c_del + * Description: + * Delete system SP2C configuration + * Input: + * svid - SVLAN VID + * dst_port - Destination port of SVLAN to CVLAN configuration + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_PORT_ID - Invalid port number. + * RT_ERR_SVLAN_VID - Invalid SVLAN VID parameter. + * RT_ERR_OUT_OF_RANGE - input out of range. + * Note: + * The API can delete SVID & Destination Port to CVLAN configuration. There are 128 SP2C configurations. + */ +extern rtk_api_ret_t rtk_svlan_sp2c_del(rtk_vlan_t svid, rtk_port_t dst_port); + + +/* Function Name: + * rtk_svlan_lookupType_set + * Description: + * Set lookup type of SVLAN + * Input: + * type - lookup type + * Output: + * None + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * Note: + * none + */ +extern rtk_api_ret_t rtk_svlan_lookupType_set(rtk_svlan_lookupType_t type); + +/* Function Name: + * rtk_svlan_lookupType_get + * Description: + * Get lookup type of SVLAN + * Input: + * pType - lookup type + * Output: + * None + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * Note: + * none + */ +extern rtk_api_ret_t rtk_svlan_lookupType_get(rtk_svlan_lookupType_t *pType); + +/* Function Name: + * rtk_svlan_trapPri_set + * Description: + * Set svlan trap priority + * Input: + * priority - priority for trap packets + * Output: + * None + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * RT_ERR_QOS_INT_PRIORITY + * Note: + * None + */ +extern rtk_api_ret_t rtk_svlan_trapPri_set(rtk_pri_t priority); + +/* Function Name: + * rtk_svlan_trapPri_get + * Description: + * Get svlan trap priority + * Input: + * None + * Output: + * pPriority - priority for trap packets + * Return: + * RT_ERR_OK + * RT_ERR_FAILED + * RT_ERR_NULL_POINTER - input parameter may be null pointer + * Note: + * None + */ +extern rtk_api_ret_t rtk_svlan_trapPri_get(rtk_pri_t *pPriority); + +/* Function Name: + * rtk_svlan_unassign_action_set + * Description: + * Configure Action of upstream without svid assign action + * Input: + * action - Action for Un-assign + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_OUT_OF_RANGE - input out of range. + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can configure action of upstream Un-assign svid packet. If action is not + * trap to CPU, the port-based SVID sure be assign as system need + */ +extern rtk_api_ret_t rtk_svlan_unassign_action_set(rtk_svlan_unassign_action_t action); + +/* Function Name: + * rtk_svlan_unassign_action_get + * Description: + * Get action of upstream without svid assignment + * Input: + * None + * Output: + * pAction - Action for Un-assign + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * Note: + * None + */ +extern rtk_api_ret_t rtk_svlan_unassign_action_get(rtk_svlan_unassign_action_t *pAction); + + +/* Function Name: + * rtk_svlan_checkAndCreateMbr + * Description: + * Check and create Member configuration and return index + * Input: + * vid - VLAN id. + * Output: + * pIndex - Member configuration index + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_VLAN_VID - Invalid VLAN ID. + * RT_ERR_TBL_FULL - Member Configuration table full + * Note: + * + */ +extern rtk_api_ret_t rtk_svlan_checkAndCreateMbr(rtk_vlan_t vid, rtk_uint32 *pIndex); + + +#endif /* __RTK_API_SVLAN_H__ */ |