diff options
Diffstat (limited to 'target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/interrupt.h')
| -rw-r--r-- | target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/interrupt.h | 254 |
1 files changed, 254 insertions, 0 deletions
diff --git a/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/interrupt.h b/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/interrupt.h new file mode 100644 index 0000000000..f2689ebc70 --- /dev/null +++ b/target/linux/mediatek/files-5.10/drivers/net/phy/rtk/rtl8367c/include/interrupt.h @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2013 Realtek Semiconductor Corp. + * All Rights Reserved. + * + * Unless you and Realtek execute a separate written software license + * agreement governing use of this software, this software is licensed + * to you under the terms of the GNU General Public License version 2, + * available at https://www.gnu.org/licenses/old-licenses/gpl-2.0.txt + * + * Purpose : RTL8367/RTL8367C switch high-level API + * + * Feature : The file includes Interrupt module high-layer API defination + * + */ + +#ifndef __RTK_API_INTERRUPT_H__ +#define __RTK_API_INTERRUPT_H__ + + +/* + * Data Type Declaration + */ +#define RTK_MAX_NUM_OF_INTERRUPT_TYPE 1 + + +typedef struct rtk_int_status_s +{ + rtk_uint16 value[RTK_MAX_NUM_OF_INTERRUPT_TYPE]; +} rtk_int_status_t; + +typedef struct rtk_int_info_s +{ + rtk_portmask_t portMask; + rtk_uint32 meterMask; + rtk_uint32 systemLearnOver; +}rtk_int_info_t; + +typedef enum rtk_int_type_e +{ + INT_TYPE_LINK_STATUS = 0, + INT_TYPE_METER_EXCEED, + INT_TYPE_LEARN_LIMIT, + INT_TYPE_LINK_SPEED, + INT_TYPE_CONGEST, + INT_TYPE_GREEN_FEATURE, + INT_TYPE_LOOP_DETECT, + INT_TYPE_8051, + INT_TYPE_CABLE_DIAG, + INT_TYPE_ACL, + INT_TYPE_RESERVED, /* Unused */ + INT_TYPE_SLIENT, + INT_TYPE_END +}rtk_int_type_t; + +typedef enum rtk_int_advType_e +{ + ADV_L2_LEARN_PORT_MASK = 0, + ADV_SPEED_CHANGE_PORT_MASK, + ADV_SPECIAL_CONGESTION_PORT_MASK, + ADV_PORT_LINKDOWN_PORT_MASK, + ADV_PORT_LINKUP_PORT_MASK, + ADV_METER_EXCEED_MASK, + ADV_RLDP_LOOPED, + ADV_RLDP_RELEASED, + ADV_END, +} rtk_int_advType_t; + +typedef enum rtk_int_polarity_e +{ + INT_POLAR_HIGH = 0, + INT_POLAR_LOW, + INT_POLAR_END +} rtk_int_polarity_t; + +/* Function Name: + * rtk_int_polarity_set + * Description: + * Set interrupt polarity configuration. + * Input: + * type - Interruptpolarity type. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can set interrupt polarity configuration. + */ +extern rtk_api_ret_t rtk_int_polarity_set(rtk_int_polarity_t type); + +/* Function Name: + * rtk_int_polarity_get + * Description: + * Get interrupt polarity configuration. + * Input: + * None + * Output: + * pType - Interruptpolarity type. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * Note: + * The API can get interrupt polarity configuration. + */ +extern rtk_api_ret_t rtk_int_polarity_get(rtk_int_polarity_t *pType); + +/* Function Name: + * rtk_int_control_set + * Description: + * Set interrupt trigger status configuration. + * Input: + * type - Interrupt type. + * enable - Interrupt status. + * Output: + * None + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * RT_ERR_ENABLE - Invalid enable input. + * Note: + * The API can set interrupt status configuration. + * The interrupt trigger status is shown in the following: + * - INT_TYPE_LINK_STATUS + * - INT_TYPE_METER_EXCEED + * - INT_TYPE_LEARN_LIMIT + * - INT_TYPE_LINK_SPEED + * - INT_TYPE_CONGEST + * - INT_TYPE_GREEN_FEATURE + * - INT_TYPE_LOOP_DETECT + * - INT_TYPE_8051, + * - INT_TYPE_CABLE_DIAG, + * - INT_TYPE_ACL, + * - INT_TYPE_SLIENT + */ +extern rtk_api_ret_t rtk_int_control_set(rtk_int_type_t type, rtk_enable_t enable); + +/* Function Name: + * rtk_int_control_get + * Description: + * Get interrupt trigger status configuration. + * Input: + * type - Interrupt type. + * Output: + * pEnable - Interrupt status. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get interrupt status configuration. + * The interrupt trigger status is shown in the following: + * - INT_TYPE_LINK_STATUS + * - INT_TYPE_METER_EXCEED + * - INT_TYPE_LEARN_LIMIT + * - INT_TYPE_LINK_SPEED + * - INT_TYPE_CONGEST + * - INT_TYPE_GREEN_FEATURE + * - INT_TYPE_LOOP_DETECT + * - INT_TYPE_8051, + * - INT_TYPE_CABLE_DIAG, + * - INT_TYPE_ACL, + * - INT_TYPE_SLIENT + */ +extern rtk_api_ret_t rtk_int_control_get(rtk_int_type_t type, rtk_enable_t* pEnable); + +/* Function Name: + * rtk_int_status_set + * Description: + * Set interrupt trigger status to clean. + * Input: + * None + * Output: + * pStatusMask - Interrupt status bit mask. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can clean interrupt trigger status when interrupt happened. + * The interrupt trigger status is shown in the following: + * - INT_TYPE_LINK_STATUS (value[0] (Bit0)) + * - INT_TYPE_METER_EXCEED (value[0] (Bit1)) + * - INT_TYPE_LEARN_LIMIT (value[0] (Bit2)) + * - INT_TYPE_LINK_SPEED (value[0] (Bit3)) + * - INT_TYPE_CONGEST (value[0] (Bit4)) + * - INT_TYPE_GREEN_FEATURE (value[0] (Bit5)) + * - INT_TYPE_LOOP_DETECT (value[0] (Bit6)) + * - INT_TYPE_8051 (value[0] (Bit7)) + * - INT_TYPE_CABLE_DIAG (value[0] (Bit8)) + * - INT_TYPE_ACL (value[0] (Bit9)) + * - INT_TYPE_SLIENT (value[0] (Bit11)) + * The status will be cleared after execute this API. + */ +extern rtk_api_ret_t rtk_int_status_set(rtk_int_status_t *pStatusMask); + +/* Function Name: + * rtk_int_status_get + * Description: + * Get interrupt trigger status. + * Input: + * None + * Output: + * pStatusMask - Interrupt status bit mask. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * The API can get interrupt trigger status when interrupt happened. + * The interrupt trigger status is shown in the following: + * - INT_TYPE_LINK_STATUS (value[0] (Bit0)) + * - INT_TYPE_METER_EXCEED (value[0] (Bit1)) + * - INT_TYPE_LEARN_LIMIT (value[0] (Bit2)) + * - INT_TYPE_LINK_SPEED (value[0] (Bit3)) + * - INT_TYPE_CONGEST (value[0] (Bit4)) + * - INT_TYPE_GREEN_FEATURE (value[0] (Bit5)) + * - INT_TYPE_LOOP_DETECT (value[0] (Bit6)) + * - INT_TYPE_8051 (value[0] (Bit7)) + * - INT_TYPE_CABLE_DIAG (value[0] (Bit8)) + * - INT_TYPE_ACL (value[0] (Bit9)) + * - INT_TYPE_SLIENT (value[0] (Bit11)) + * + */ +extern rtk_api_ret_t rtk_int_status_get(rtk_int_status_t* pStatusMask); + +/* Function Name: + * rtk_int_advanceInfo_get + * Description: + * Get interrupt advanced information. + * Input: + * adv_type - Advanced interrupt type. + * Output: + * info - Information per type. + * Return: + * RT_ERR_OK - OK + * RT_ERR_FAILED - Failed + * RT_ERR_SMI - SMI access error + * RT_ERR_INPUT - Invalid input parameters. + * Note: + * This API can get advanced information when interrupt happened. + * The status will be cleared after execute this API. + */ +extern rtk_api_ret_t rtk_int_advanceInfo_get(rtk_int_advType_t adv_type, rtk_int_info_t* info); + + +#endif /* __RTK_API_INTERRUPT_H__ */ |