aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/layerscape
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/layerscape')
-rw-r--r--target/linux/layerscape/image/Makefile14
-rw-r--r--target/linux/layerscape/patches-4.4/0238-arm64-disable-CONFIG_EEPROM_AT24-for-freescale.confi.patch29
-rw-r--r--target/linux/layerscape/patches-4.4/1239-mtd-extend-physmap_of-to-let-the-device-tree-specify.patch90
-rw-r--r--target/linux/layerscape/patches-4.4/3227-ls2088a-dts-add-ls2088a-dts.patch1352
-rw-r--r--target/linux/layerscape/patches-4.4/3228-ls2088a-add-ls2088a-its.patch138
-rw-r--r--target/linux/layerscape/patches-4.4/4234-fsl-ifc-fix-compilation-error-when-COMPAT-not-enable.patch34
-rw-r--r--target/linux/layerscape/patches-4.4/8229-drivers-clk-qoriq-Add-ls2088a-key-to-chipinfo-table.patch35
-rw-r--r--target/linux/layerscape/patches-4.4/8230-layerscape-pci-fix-linkup-issue.patch42
-rw-r--r--target/linux/layerscape/patches-4.4/8231-driver-clk-qoriq-Add-ls2088a-clk-support.patch25
-rw-r--r--target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option-to-skip-disabling-PCA954x-Mux.patch110
-rw-r--r--target/linux/layerscape/patches-4.4/8235-pci-layerscape-fix-pci-lut-offset-issue.patch38
-rw-r--r--target/linux/layerscape/patches-4.4/8236-clk-add-API-of-clks.patch84
-rw-r--r--target/linux/layerscape/patches-4.4/8237-pcie-ls208x-use-unified-compatible-fsl-ls2080a-pcie-.patch103
13 files changed, 2094 insertions, 0 deletions
diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile
index c70955785b..341d5fbda0 100644
--- a/target/linux/layerscape/image/Makefile
+++ b/target/linux/layerscape/image/Makefile
@@ -106,4 +106,18 @@ endif
endef
TARGET_DEVICES += ls1088ardb
+define Device/ls2088ardb
+ DEVICE_TITLE := ls2088ardb-$(SUBTARGET)
+ DEVICE_PACKAGES += rcw-layerscape-ls2088ardb uboot-layerscape-$(SUBTARGET)-ls2088ardb mc-binary-ls2088ardb
+ifeq ($(SUBTARGET),64b)
+ DEVICE_DTS = freescale/fsl-ls2088a-rdb
+endif
+ifeq ($(SUBTARGET),32b)
+ DEVICE_DTS = ../../../arm64/boot/dts/freescale/fsl-ls2088a-rdb
+endif
+ IMAGE/firmware.bin = append-ls-dtb $$(DEVICE_DTS) | pad-to 1M | append-kernel | pad-to 6M | \
+ append-rootfs | pad-rootfs | check-size 24117249
+endef
+TARGET_DEVICES += ls2088ardb
+
$(eval $(call BuildImage))
diff --git a/target/linux/layerscape/patches-4.4/0238-arm64-disable-CONFIG_EEPROM_AT24-for-freescale.confi.patch b/target/linux/layerscape/patches-4.4/0238-arm64-disable-CONFIG_EEPROM_AT24-for-freescale.confi.patch
new file mode 100644
index 0000000000..d8f6c2b7df
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/0238-arm64-disable-CONFIG_EEPROM_AT24-for-freescale.confi.patch
@@ -0,0 +1,29 @@
+From fbc31a61b7bcfbc9ae1a8acda547de891f4b8ee4 Mon Sep 17 00:00:00 2001
+From: Yangbo Lu <yangbo.lu@nxp.com>
+Date: Mon, 31 Oct 2016 17:50:03 +0800
+Subject: [PATCH 238/238] arm64: disable CONFIG_EEPROM_AT24 for
+ freescale.config
+
+Disable CONFIG_EEPROM_AT24 in freescale.config. Otherwise, i2cdump
+for EEPROM will get resource busy issue.
+
+Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
+---
+ arch/arm64/configs/freescale.config | 1 -
+ 1 file changed, 1 deletion(-)
+
+diff --git a/arch/arm64/configs/freescale.config b/arch/arm64/configs/freescale.config
+index a31951c..5447d7a 100644
+--- a/arch/arm64/configs/freescale.config
++++ b/arch/arm64/configs/freescale.config
+@@ -121,7 +121,6 @@ CONFIG_IMX2_WDT=y
+ CONFIG_HWMON=y
+ CONFIG_SENSORS_LM90=y
+ CONFIG_SENSORS_INA2XX=y
+-CONFIG_EEPROM_AT24=y
+ # lpuart
+ CONFIG_SERIAL_FSL_LPUART=y
+ CONFIG_SERIAL_FSL_LPUART_CONSOLE=y
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/1239-mtd-extend-physmap_of-to-let-the-device-tree-specify.patch b/target/linux/layerscape/patches-4.4/1239-mtd-extend-physmap_of-to-let-the-device-tree-specify.patch
new file mode 100644
index 0000000000..8254490bb0
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/1239-mtd-extend-physmap_of-to-let-the-device-tree-specify.patch
@@ -0,0 +1,90 @@
+From 6b54054c4053215fe4add195c67daca9a466ba92 Mon Sep 17 00:00:00 2001
+From: "ying.zhang" <ying.zhang22455@nxp.com>
+Date: Fri, 23 Dec 2016 22:21:22 +0800
+Subject: [PATCH] mtd: extend physmap_of to let the device tree specify the
+ parition probe
+
+This is to support custom partitioning schemes for embedded PPC. To use
+define your own mtd_part_parser and then add something like:
+ linux,part-probe = "my_probe", "cmdlinepart";
+ To the board's dts file.
+
+If linux,part-probe is not specified then this behaves the same as before.
+
+Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
+Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
+---
+ drivers/mtd/maps/physmap_of.c | 46 ++++++++++++++++++++++++++++++++++++++++-
+ 1 file changed, 45 insertions(+), 1 deletion(-)
+
+diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c
+index fef1d1b..e46b4e9 100644
+--- a/drivers/mtd/maps/physmap_of.c
++++ b/drivers/mtd/maps/physmap_of.c
+@@ -112,9 +112,47 @@ static struct mtd_info *obsolete_probe(struct platform_device *dev,
+ static const char * const part_probe_types_def[] = {
+ "cmdlinepart", "RedBoot", "ofpart", "ofoldpart", NULL };
+
++static const char * const *of_get_probes(struct device_node *dp)
++{
++ const char *cp;
++ int cplen;
++ unsigned int l;
++ unsigned int count;
++ const char **res;
++
++ cp = of_get_property(dp, "linux,part-probe", &cplen);
++ if (cp == NULL)
++ return part_probe_types_def;
++
++ count = 0;
++ for (l = 0; l != cplen; l++)
++ if (cp[l] == 0)
++ count++;
++
++ res = kzalloc((count + 1)*sizeof(*res), GFP_KERNEL);
++ if (!res)
++ return NULL;
++ count = 0;
++ while (cplen > 0) {
++ res[count] = cp;
++ l = strlen(cp) + 1;
++ cp += l;
++ cplen -= l;
++ count++;
++ }
++ return res;
++}
++
++static void of_free_probes(const char * const *probes)
++{
++ if (probes != part_probe_types_def)
++ kfree(probes);
++}
++
+ static const struct of_device_id of_flash_match[];
+ static int of_flash_probe(struct platform_device *dev)
+ {
++ const char * const *part_probe_types;
+ const struct of_device_id *match;
+ struct device_node *dp = dev->dev.of_node;
+ struct resource res;
+@@ -273,8 +311,14 @@ static int of_flash_probe(struct platform_device *dev)
+ goto err_out;
+
+ ppdata.of_node = dp;
+- mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata,
++ part_probe_types = of_get_probes(dp);
++ if (!part_probe_types) {
++ err = -ENOMEM;
++ goto err_out;
++ }
++ mtd_device_parse_register(info->cmtd, part_probe_types, &ppdata,
+ NULL, 0);
++ of_free_probes(part_probe_types);
+
+ kfree(mtd_list);
+
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/3227-ls2088a-dts-add-ls2088a-dts.patch b/target/linux/layerscape/patches-4.4/3227-ls2088a-dts-add-ls2088a-dts.patch
new file mode 100644
index 0000000000..91de6f4019
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3227-ls2088a-dts-add-ls2088a-dts.patch
@@ -0,0 +1,1352 @@
+From 45ba5bb2bdc9462fe5998aeb75e2c7e33b56c9fb Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Mon, 7 Nov 2016 10:23:52 +0800
+Subject: [PATCH 227/238] ls2088a/dts: add ls2088a dts
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/Makefile | 2 +
+ arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 241 ++++++
+ arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 207 +++++
+ arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 854 +++++++++++++++++++++
+ 4 files changed, 1304 insertions(+)
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+ create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+
+diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
+index b599645..e6c2a9f 100644
+--- a/arch/arm64/boot/dts/freescale/Makefile
++++ b/arch/arm64/boot/dts/freescale/Makefile
+@@ -6,6 +6,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frdm.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb
+ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb
++dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb
+
+ always := $(dtb-y)
+ subdir-y := $(dts-dirs)
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+new file mode 100644
+index 0000000..04d3726
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
+@@ -0,0 +1,241 @@
++/*
++ * Device Tree file for Freescale LS2080a QDS Board
++ *
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "fsl-ls2088a.dtsi"
++
++/ {
++ model = "Freescale Layerscape 2088a QDS Board";
++ compatible = "fsl,ls2088a-qds", "fsl,ls2088a";
++};
++
++&esdhc {
++ status = "okay";
++};
++
++&ifc {
++ status = "okay";
++ #address-cells = <2>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
++ 0x2 0x0 0x5 0x30000000 0x00010000
++ 0x3 0x0 0x5 0x20000000 0x00010000>;
++
++ nor@0,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "cfi-flash";
++ reg = <0x0 0x0 0x8000000>;
++ bank-width = <2>;
++ device-width = <1>;
++ };
++
++ nand@2,0 {
++ compatible = "fsl,ifc-nand";
++ reg = <0x2 0x0 0x10000>;
++ };
++
++ cpld@3,0 {
++ reg = <0x3 0x0 0x10000>;
++ compatible = "fsl,ls2088a-qds-qixis", "fsl,ls2080a-qds-qixis",
++ "fsl,fpga-qixis";
++ };
++};
++
++&ftm0 {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++ pca9547@77 {
++ compatible = "nxp,pca9547";
++ reg = <0x77>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ i2c@0 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x00>;
++ rtc@68 {
++ compatible = "dallas,ds3232";
++ reg = <0x68>;
++ };
++ };
++
++ i2c@2 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x02>;
++
++ ina220@40 {
++ compatible = "ti,ina220";
++ reg = <0x40>;
++ shunt-resistor = <500>;
++ };
++ ina220@41 {
++ compatible = "ti,ina220";
++ reg = <0x41>;
++ shunt-resistor = <1000>;
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x3>;
++
++ adt7481@4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++ };
++ };
++};
++
++&i2c1 {
++ status = "disabled";
++};
++
++&i2c2 {
++ status = "disabled";
++};
++
++&i2c3 {
++ status = "disabled";
++};
++
++&dspi {
++ status = "okay";
++ dflash0: n25q128a {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <0>;
++ };
++ dflash1: sst25wf040b {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <1>;
++ };
++ dflash2: en25s64 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <2>;
++ };
++};
++
++&qspi {
++ status = "okay";
++ qflash0: s25fs256s1@0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <20000000>;
++ m25p,fast-read;
++ reg = <0>;
++ };
++
++ qflash2: s25fs256s1@2 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <20000000>;
++ m25p,fast-read;
++ reg = <2>;
++ };
++};
++
++&sata0 {
++ status = "okay";
++};
++
++&sata1 {
++ status = "okay";
++};
++
++&usb0 {
++ status = "okay";
++};
++
++&usb1 {
++ status = "okay";
++};
++
++&ifc {
++ boardctrl: board-control@3,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
++ reg = <3 0 0x300>; /* TODO check address */
++ ranges = <0 3 0 0x300>;
++
++ mdio_mux_emi1 {
++ compatible = "mdio-mux-mmioreg", "mdio-mux";
++ mdio-parent-bus = <&emdio1>;
++ reg = <0x54 1>; /* BRDCFG4 */
++ mux-mask = <0xe0>; /* EMI1_MDIO */
++
++ #address-cells=<1>;
++ #size-cells = <0>;
++
++ /* Child MDIO buses, one for each riser card:
++ reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
++
++ VSC8234 PHYs on the riser cards.
++ */
++
++ mdio_mux3: mdio@60 {
++ reg = <0x60>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ mdio0_phy12: mdio_phy0@1c {
++ reg = <0x1c>;
++ phy-connection-type = "sgmii";
++ };
++ mdio0_phy13: mdio_phy1@1d {
++ reg = <0x1d>;
++ phy-connection-type = "sgmii";
++ };
++ mdio0_phy14: mdio_phy2@1e {
++ reg = <0x1e>;
++ phy-connection-type = "sgmii";
++ };
++ mdio0_phy15: mdio_phy3@1f {
++ reg = <0x1f>;
++ phy-connection-type = "sgmii";
++ };
++ };
++ };
++ };
++};
++
++/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
++&dpmac9 {
++ phy-handle = <&mdio0_phy12>;
++};
++&dpmac10 {
++ phy-handle = <&mdio0_phy13>;
++};
++&dpmac11 {
++ phy-handle = <&mdio0_phy14>;
++};
++&dpmac12 {
++ phy-handle = <&mdio0_phy15>;
++};
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+new file mode 100644
+index 0000000..ce553fb
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
+@@ -0,0 +1,207 @@
++/*
++ * Device Tree file for Freescale LS2080a RDB board
++ *
++ * Copyright (C) 2015, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++#include "fsl-ls2088a.dtsi"
++
++/ {
++ model = "Freescale Layerscape 2088a RDB Board";
++ compatible = "fsl,ls2088a-rdb", "fsl,ls2088a";
++};
++
++&esdhc {
++ status = "okay";
++};
++
++&ifc {
++ status = "okay";
++ #address-cells = <2>;
++ #size-cells = <1>;
++ ranges = <0x0 0x0 0x5 0x80000000 0x08000000
++ 0x2 0x0 0x5 0x30000000 0x00010000
++ 0x3 0x0 0x5 0x20000000 0x00010000>;
++
++ nor@0,0 {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "cfi-flash";
++ reg = <0x0 0x0 0x8000000>;
++ bank-width = <2>;
++ device-width = <1>;
++ };
++
++ nand@2,0 {
++ compatible = "fsl,ifc-nand";
++ reg = <0x2 0x0 0x10000>;
++ };
++
++ cpld@3,0 {
++ reg = <0x3 0x0 0x10000>;
++ compatible = "fsl,ls2088a-qds-qixis", "fsl,ls2080a-qds-qixis",
++ "fsl,fpga-qixis";
++ };
++};
++
++&ftm0 {
++ status = "okay";
++};
++
++&i2c0 {
++ status = "okay";
++ pca9547@75 {
++ compatible = "nxp,pca9547";
++ reg = <0x75>;
++ #address-cells = <1>;
++ #size-cells = <0>;
++ i2c-mux-never-disable;
++ i2c@1 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x01>;
++ rtc@68 {
++ compatible = "dallas,ds3232";
++ reg = <0x68>;
++ };
++ };
++
++ i2c@3 {
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x3>;
++
++ adt7481@4c {
++ compatible = "adi,adt7461";
++ reg = <0x4c>;
++ };
++ };
++ };
++};
++
++&i2c1 {
++ status = "disabled";
++};
++
++&i2c2 {
++ status = "disabled";
++};
++
++&i2c3 {
++ status = "disabled";
++};
++
++&dspi {
++ status = "okay";
++ dflash0: n25q512a {
++ #address-cells = <1>;
++ #size-cells = <1>;
++ compatible = "st,m25p80";
++ spi-max-frequency = <3000000>;
++ reg = <0>;
++ };
++};
++
++&qspi {
++ status = "disabled";
++};
++
++&sata0 {
++ status = "okay";
++};
++
++&sata1 {
++ status = "okay";
++};
++
++&usb0 {
++ status = "okay";
++};
++
++&usb1 {
++ status = "okay";
++};
++
++&emdio1 {
++ /* CS4340 PHYs */
++ mdio1_phy1: emdio1_phy@1 {
++ reg = <0x10>;
++ phy-connection-type = "xfi";
++ };
++ mdio1_phy2: emdio1_phy@2 {
++ reg = <0x11>;
++ phy-connection-type = "xfi";
++ };
++ mdio1_phy3: emdio1_phy@3 {
++ reg = <0x12>;
++ phy-connection-type = "xfi";
++ };
++ mdio1_phy4: emdio1_phy@4 {
++ reg = <0x13>;
++ phy-connection-type = "xfi";
++ };
++};
++
++&emdio2 {
++ /* AQR405 PHYs */
++ mdio2_phy1: emdio2_phy@1 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 1 0x4>; /* Level high type */
++ reg = <0x0>;
++ phy-connection-type = "xfi";
++ };
++ mdio2_phy2: emdio2_phy@2 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 2 0x4>; /* Level high type */
++ reg = <0x1>;
++ phy-connection-type = "xfi";
++ };
++ mdio2_phy3: emdio2_phy@3 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 4 0x4>; /* Level high type */
++ reg = <0x2>;
++ phy-connection-type = "xfi";
++ };
++ mdio2_phy4: emdio2_phy@4 {
++ compatible = "ethernet-phy-ieee802.3-c45";
++ interrupts = <0 5 0x4>; /* Level high type */
++ reg = <0x3>;
++ phy-connection-type = "xfi";
++ };
++};
++
++/* Update DPMAC connections to external PHYs, under the assumption of
++ * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
++ */
++&dpmac1 {
++ phy-handle = <&mdio1_phy1>;
++};
++&dpmac2 {
++ phy-handle = <&mdio1_phy2>;
++};
++&dpmac3 {
++ phy-handle = <&mdio1_phy3>;
++};
++&dpmac4 {
++ phy-handle = <&mdio1_phy4>;
++};
++&dpmac5 {
++ phy-handle = <&mdio2_phy1>;
++};
++&dpmac6 {
++ phy-handle = <&mdio2_phy2>;
++};
++&dpmac7 {
++ phy-handle = <&mdio2_phy3>;
++};
++&dpmac8 {
++ phy-handle = <&mdio2_phy4>;
++};
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+new file mode 100644
+index 0000000..bd69942
+--- /dev/null
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+@@ -0,0 +1,854 @@
++/*
++ * Device Tree Include file for Freescale Layerscape-2088A family SoC.
++ *
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPLv2 or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ * a) This library is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of the
++ * License, or (at your option) any later version.
++ *
++ * This library is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
++ * GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ * b) Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation
++ * files (the "Software"), to deal in the Software without
++ * restriction, including without limitation the rights to use,
++ * copy, modify, merge, publish, distribute, sublicense, and/or
++ * sell copies of the Software, and to permit persons to whom the
++ * Software is furnished to do so, subject to the following
++ * conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ * OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include <dt-bindings/thermal/thermal.h>
++
++/memreserve/ 0x80000000 0x00010000;
++
++/ {
++ compatible = "fsl,ls2088a";
++ interrupt-parent = <&gic>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++
++ cpus {
++ #address-cells = <2>;
++ #size-cells = <0>;
++
++ cpu0: cpu@0 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x0>;
++ clocks = <&clockgen 1 0>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu1: cpu@1 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x1>;
++ clocks = <&clockgen 1 0>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu2: cpu@100 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x100>;
++ clocks = <&clockgen 1 1>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu3: cpu@101 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x101>;
++ clocks = <&clockgen 1 1>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu4: cpu@200 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x200>;
++ clocks = <&clockgen 1 2>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu5: cpu@201 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x201>;
++ clocks = <&clockgen 1 2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu6: cpu@300 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x300>;
++ clocks = <&clockgen 1 3>;
++ #cooling-cells = <2>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++
++ cpu7: cpu@301 {
++ device_type = "cpu";
++ compatible = "arm,cortex-a72";
++ reg = <0x0 0x301>;
++ clocks = <&clockgen 1 3>;
++ cpu-idle-states = <&CPU_PW20>;
++ };
++ };
++
++ pmu {
++ compatible = "arm,armv8-pmuv3";
++ interrupts = <1 7 0x8>; /* PMU PPI, Level low type */
++ };
++
++ idle-states {
++ entry-method = "arm,psci";
++
++ CPU_PW20: cpu-pw20 {
++ compatible = "arm,idle-state";
++ idle-state-name = "PW20";
++ arm,psci-suspend-param = <0x00010000>;
++ entry-latency-us = <2000>;
++ exit-latency-us = <2000>;
++ min-residency-us = <6000>;
++ };
++ };
++
++ gic: interrupt-controller@6000000 {
++ compatible = "arm,gic-v3";
++ reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
++ <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */
++ <0x0 0x0c0c0000 0 0x2000>, /* GICC */
++ <0x0 0x0c0d0000 0 0x1000>, /* GICH */
++ <0x0 0x0c0e0000 0 0x20000>; /* GICV */
++ #interrupt-cells = <3>;
++ #address-cells = <2>;
++ #size-cells = <2>;
++ ranges;
++ interrupt-controller;
++ interrupts = <1 9 0x4>;
++
++ its: gic-its@6020000 {
++ compatible = "arm,gic-v3-its";
++ msi-controller;
++ reg = <0x0 0x6020000 0 0x20000>;
++ };
++ };
++
++ sysclk: sysclk {
++ compatible = "fixed-clock";
++ #clock-cells = <0>;
++ clock-frequency = <100000000>;
++ clock-output-names = "sysclk";
++ };
++
++ clockgen: clocking@1300000 {
++ compatible = "fsl,ls2088a-clockgen";
++ reg = <0 0x1300000 0 0xa0000>;
++ #clock-cells = <2>;
++ clocks = <&sysclk>;
++ };
++
++ tmu: tmu@1f80000 {
++ compatible = "fsl,qoriq-tmu", "fsl,ls2080a-tmu", "fsl,ls2088a-tmu";
++ reg = <0x0 0x1f80000 0x0 0x10000>;
++ interrupts = <0 23 0x4>;
++ fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>;
++ fsl,tmu-calibration = <0x00000000 0x00000026
++ 0x00000001 0x0000002d
++ 0x00000002 0x00000032
++ 0x00000003 0x00000039
++ 0x00000004 0x0000003f
++ 0x00000005 0x00000046
++ 0x00000006 0x0000004d
++ 0x00000007 0x00000054
++ 0x00000008 0x0000005a
++ 0x00000009 0x00000061
++ 0x0000000a 0x0000006a
++ 0x0000000b 0x00000071
++
++ 0x00010000 0x00000025
++ 0x00010001 0x0000002c
++ 0x00010002 0x00000035
++ 0x00010003 0x0000003d
++ 0x00010004 0x00000045
++ 0x00010005 0x0000004e
++ 0x00010006 0x00000057
++ 0x00010007 0x00000061
++ 0x00010008 0x0000006b
++ 0x00010009 0x00000076
++
++ 0x00020000 0x00000029
++ 0x00020001 0x00000033
++ 0x00020002 0x0000003d
++ 0x00020003 0x00000049
++ 0x00020004 0x00000056
++ 0x00020005 0x00000061
++ 0x00020006 0x0000006d
++
++ 0x00030000 0x00000021
++ 0x00030001 0x0000002a
++ 0x00030002 0x0000003c
++ 0x00030003 0x0000004e>;
++ little-endian;
++ #thermal-sensor-cells = <1>;
++ };
++
++ thermal-zones {
++ cpu_thermal: cpu-thermal {
++ polling-delay-passive = <1000>;
++ polling-delay = <5000>;
++
++ thermal-sensors = <&tmu 4>;
++
++ trips {
++ cpu_alert: cpu-alert {
++ temperature = <75000>;
++ hysteresis = <2000>;
++ type = "passive";
++ };
++ cpu_crit: cpu-crit {
++ temperature = <85000>;
++ hysteresis = <2000>;
++ type = "critical";
++ };
++ };
++
++ cooling-maps {
++ map0 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu0 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ map1 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu2 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ map2 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu4 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ map3 {
++ trip = <&cpu_alert>;
++ cooling-device =
++ <&cpu6 THERMAL_NO_LIMIT
++ THERMAL_NO_LIMIT>;
++ };
++ };
++ };
++ };
++
++ serial0: serial@21c0500 {
++ device_type = "serial";
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21c0500 0x0 0x100>;
++ clocks = <&clockgen 4 3>;
++ interrupts = <0 32 0x4>; /* Level high type */
++ };
++
++ serial1: serial@21c0600 {
++ device_type = "serial";
++ compatible = "fsl,ns16550", "ns16550a";
++ reg = <0x0 0x21c0600 0x0 0x100>;
++ clocks = <&clockgen 4 3>;
++ interrupts = <0 32 0x4>; /* Level high type */
++ };
++ cluster1_core0_watchdog: wdt@c000000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc000000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster1_core1_watchdog: wdt@c010000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc010000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster2_core0_watchdog: wdt@c100000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc100000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster2_core1_watchdog: wdt@c110000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc110000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster3_core0_watchdog: wdt@c200000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc200000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster3_core1_watchdog: wdt@c210000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc210000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster4_core0_watchdog: wdt@c300000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc300000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ cluster4_core1_watchdog: wdt@c310000 {
++ compatible = "arm,sp805-wdt", "arm,primecell";
++ reg = <0x0 0xc310000 0x0 0x1000>;
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "apb_pclk", "wdog_clk";
++ };
++
++ gpio0: gpio@2300000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2300000 0x0 0x10000>;
++ interrupts = <0 36 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio1: gpio@2310000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2310000 0x0 0x10000>;
++ interrupts = <0 36 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio2: gpio@2320000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2320000 0x0 0x10000>;
++ interrupts = <0 37 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ gpio3: gpio@2330000 {
++ compatible = "fsl,qoriq-gpio";
++ reg = <0x0 0x2330000 0x0 0x10000>;
++ interrupts = <0 37 0x4>; /* Level high type */
++ gpio-controller;
++ little-endian;
++ #gpio-cells = <2>;
++ interrupt-controller;
++ #interrupt-cells = <2>;
++ };
++
++ /* TODO: WRIOP (CCSR?) */
++ emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000, E-MDIO1: 0x1_6000 */
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0x0 0x8B96000 0x0 0x1000>;
++ device_type = "mdio"; /* TODO: is this necessary? */
++ little-endian; /* force the driver in LE mode */
++
++ /* Not necessary on the QDS, but needed on the RDB */
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000, E-MDIO2: 0x1_7000 */
++ compatible = "fsl,fman-memac-mdio";
++ reg = <0x0 0x8B97000 0x0 0x1000>;
++ device_type = "mdio"; /* TODO: is this necessary? */
++ little-endian; /* force the driver in LE mode */
++
++ #address-cells = <1>;
++ #size-cells = <0>;
++ };
++
++ ifc: ifc@2240000 {
++ compatible = "fsl,ifc", "simple-bus";
++ reg = <0x0 0x2240000 0x0 0x20000>;
++ interrupts = <0 21 0x4>; /* Level high type */
++ little-endian;
++ #address-cells = <2>;
++ #size-cells = <1>;
++
++ ranges = <0 0 0x5 0x80000000 0x08000000
++ 2 0 0x5 0x30000000 0x00010000
++ 3 0 0x5 0x20000000 0x00010000>;
++ };
++
++ esdhc: esdhc@2140000 {
++ compatible = "fsl,ls2088a-esdhc", "fsl,ls2080a-esdhc",
++ "fsl,esdhc";
++ reg = <0x0 0x2140000 0x0 0x10000>;
++ interrupts = <0 28 0x4>; /* Level high type */
++ clock-frequency = <0>;
++ voltage-ranges = <1800 1800 3300 3300>;
++ sdhci,auto-cmd12;
++ little-endian;
++ bus-width = <4>;
++ };
++
++ ftm0: ftm0@2800000 {
++ compatible = "fsl,ftm-alarm";
++ reg = <0x0 0x2800000 0x0 0x10000>;
++ interrupts = <0 44 4>;
++ };
++
++ reset: reset@1E60000 {
++ compatible = "fsl,ls-reset";
++ reg = <0x0 0x1E60000 0x0 0x10000>;
++ };
++
++ dspi: dspi@2100000 {
++ compatible = "fsl,ls2088a-dspi", "fsl,ls2085a-dspi",
++ "fsl,ls2080a-dspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2100000 0x0 0x10000>;
++ interrupts = <0 26 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ clock-names = "dspi";
++ spi-num-chipselects = <5>;
++ bus-num = <0>;
++ };
++
++ i2c0: i2c@2000000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2000000 0x0 0x10000>;
++ interrupts = <0 34 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c1: i2c@2010000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2010000 0x0 0x10000>;
++ interrupts = <0 34 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c2: i2c@2020000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2020000 0x0 0x10000>;
++ interrupts = <0 35 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ i2c3: i2c@2030000 {
++ compatible = "fsl,vf610-i2c";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x2030000 0x0 0x10000>;
++ interrupts = <0 35 0x4>; /* Level high type */
++ clock-names = "i2c";
++ clocks = <&clockgen 4 3>;
++ };
++
++ qspi: quadspi@20c0000 {
++ compatible = "fsl,ls2088a-qspi", "fsl,ls2080a-qspi";
++ #address-cells = <1>;
++ #size-cells = <0>;
++ reg = <0x0 0x20c0000 0x0 0x10000>,
++ <0x0 0x20000000 0x0 0x10000000>;
++ reg-names = "QuadSPI", "QuadSPI-memory";
++ interrupts = <0 25 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>, <&clockgen 4 3>;
++ clock-names = "qspi_en", "qspi";
++ };
++
++ pcie1: pcie@3400000 {
++ compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
++ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 108 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
++ <0000 0 0 2 &gic 0 0 0 110 4>,
++ <0000 0 0 3 &gic 0 0 0 111 4>,
++ <0000 0 0 4 &gic 0 0 0 112 4>;
++ };
++
++ pcie2: pcie@3500000 {
++ compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
++ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 113 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
++ <0000 0 0 2 &gic 0 0 0 115 4>,
++ <0000 0 0 3 &gic 0 0 0 116 4>,
++ <0000 0 0 4 &gic 0 0 0 117 4>;
++ };
++
++ pcie3: pcie@3600000 {
++ compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
++ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 118 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <8>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
++ <0000 0 0 2 &gic 0 0 0 120 4>,
++ <0000 0 0 3 &gic 0 0 0 121 4>,
++ <0000 0 0 4 &gic 0 0 0 122 4>;
++ };
++
++ pcie4: pcie@3700000 {
++ compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
++ "fsl,ls2085a-pcie", "snps,dw-pcie";
++ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
++ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */
++ reg-names = "regs", "config";
++ interrupts = <0 123 0x4>; /* Level high type */
++ interrupt-names = "aer";
++ #address-cells = <3>;
++ #size-cells = <2>;
++ device_type = "pci";
++ dma-coherent;
++ fsl,lut_diff;
++ num-lanes = <4>;
++ bus-range = <0x0 0xff>;
++ ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000 /* downstream I/O */
++ 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
++ msi-parent = <&its>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0 0 0 7>;
++ interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
++ <0000 0 0 2 &gic 0 0 0 125 4>,
++ <0000 0 0 3 &gic 0 0 0 126 4>,
++ <0000 0 0 4 &gic 0 0 0 127 4>;
++ };
++
++ sata0: sata@3200000 {
++ status = "disabled";
++ compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
++ reg = <0x0 0x3200000 0x0 0x10000>;
++ interrupts = <0 133 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ };
++
++ sata1: sata@3210000 {
++ status = "disabled";
++ compatible = "fsl,ls2088a-ahci", "fsl,ls2080a-ahci";
++ reg = <0x0 0x3210000 0x0 0x10000>;
++ interrupts = <0 136 0x4>; /* Level high type */
++ clocks = <&clockgen 4 3>;
++ };
++
++ usb0: usb3@3100000 {
++ status = "disabled";
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3100000 0x0 0x10000>;
++ interrupts = <0 80 0x4>; /* Level high type */
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ usb1: usb3@3110000 {
++ status = "disabled";
++ compatible = "snps,dwc3";
++ reg = <0x0 0x3110000 0x0 0x10000>;
++ interrupts = <0 81 0x4>; /* Level high type */
++ dr_mode = "host";
++ configure-gfladj;
++ snps,dis_rxdet_inp3_quirk;
++ };
++
++ smmu: iommu@5000000 {
++ compatible = "arm,mmu-500";
++ reg = <0 0x5000000 0 0x800000>;
++ #global-interrupts = <12>;
++ interrupts = <0 13 4>, /* global secure fault */
++ <0 14 4>, /* combined secure interrupt */
++ <0 15 4>, /* global non-secure fault */
++ <0 16 4>, /* combined non-secure interrupt */
++ /* performance counter interrupts 0-7 */
++ <0 211 4>,
++ <0 212 4>,
++ <0 213 4>,
++ <0 214 4>,
++ <0 215 4>,
++ <0 216 4>,
++ <0 217 4>,
++ <0 218 4>,
++ /* per context interrupt, 64 interrupts */
++ <0 146 4>,
++ <0 147 4>,
++ <0 148 4>,
++ <0 149 4>,
++ <0 150 4>,
++ <0 151 4>,
++ <0 152 4>,
++ <0 153 4>,
++ <0 154 4>,
++ <0 155 4>,
++ <0 156 4>,
++ <0 157 4>,
++ <0 158 4>,
++ <0 159 4>,
++ <0 160 4>,
++ <0 161 4>,
++ <0 162 4>,
++ <0 163 4>,
++ <0 164 4>,
++ <0 165 4>,
++ <0 166 4>,
++ <0 167 4>,
++ <0 168 4>,
++ <0 169 4>,
++ <0 170 4>,
++ <0 171 4>,
++ <0 172 4>,
++ <0 173 4>,
++ <0 174 4>,
++ <0 175 4>,
++ <0 176 4>,
++ <0 177 4>,
++ <0 178 4>,
++ <0 179 4>,
++ <0 180 4>,
++ <0 181 4>,
++ <0 182 4>,
++ <0 183 4>,
++ <0 184 4>,
++ <0 185 4>,
++ <0 186 4>,
++ <0 187 4>,
++ <0 188 4>,
++ <0 189 4>,
++ <0 190 4>,
++ <0 191 4>,
++ <0 192 4>,
++ <0 193 4>,
++ <0 194 4>,
++ <0 195 4>,
++ <0 196 4>,
++ <0 197 4>,
++ <0 198 4>,
++ <0 199 4>,
++ <0 200 4>,
++ <0 201 4>,
++ <0 202 4>,
++ <0 203 4>,
++ <0 204 4>,
++ <0 205 4>,
++ <0 206 4>,
++ <0 207 4>,
++ <0 208 4>,
++ <0 209 4>;
++ mmu-masters = <&fsl_mc 0x300 0>;
++ };
++
++ timer {
++ compatible = "arm,armv8-timer";
++ interrupts = <1 13 0x1>, /* Physical Secure PPI, edge triggered */
++ <1 14 0x1>, /* Physical Non-Secure PPI, edge triggered */
++ <1 11 0x1>, /* Virtual PPI, edge triggered */
++ <1 10 0x1>; /* Hypervisor PPI, edge triggered */
++ arm,reread-timer;
++ fsl,erratum-a008585;
++ };
++
++ fsl_mc: fsl-mc@80c000000 {
++ compatible = "fsl,qoriq-mc";
++ #stream-id-cells = <2>;
++ reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
++ <0x00000000 0x08340000 0 0x40000>; /* MC control reg */
++ msi-parent = <&its>;
++ #address-cells = <3>;
++ #size-cells = <1>;
++
++ /*
++ * Region type 0x0 - MC portals
++ * Region type 0x1 - QBMAN portals
++ */
++ ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
++ 0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
++
++ /*
++ * Define the maximum number of MACs present on the SoC.
++ * They won't necessarily be all probed, since the
++ * Data Path Layout file and the MC firmware can put fewer
++ * actual DPMAC objects on the MC bus.
++ */
++ dpmacs {
++ #address-cells = <1>;
++ #size-cells = <0>;
++
++ dpmac1: dpmac@1 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <1>;
++ };
++ dpmac2: dpmac@2 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <2>;
++ };
++ dpmac3: dpmac@3 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <3>;
++ };
++ dpmac4: dpmac@4 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <4>;
++ };
++ dpmac5: dpmac@5 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <5>;
++ };
++ dpmac6: dpmac@6 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <6>;
++ };
++ dpmac7: dpmac@7 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <7>;
++ };
++ dpmac8: dpmac@8 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <8>;
++ };
++ dpmac9: dpmac@9 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <9>;
++ };
++ dpmac10: dpmac@10 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xa>;
++ };
++ dpmac11: dpmac@11 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xb>;
++ };
++ dpmac12: dpmac@12 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xc>;
++ };
++ dpmac13: dpmac@13 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xd>;
++ };
++ dpmac14: dpmac@14 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xe>;
++ };
++ dpmac15: dpmac@15 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0xf>;
++ };
++ dpmac16: dpmac@16 {
++ compatible = "fsl,qoriq-mc-dpmac";
++ reg = <0x10>;
++ };
++ };
++ };
++
++ ccn@4000000 {
++ compatible = "arm,ccn-504";
++ reg = <0x0 0x04000000 0x0 0x01000000>;
++ interrupts = <0 12 4>;
++ };
++
++ memory@80000000 {
++ device_type = "memory";
++ reg = <0x00000000 0x80000000 0 0x80000000>;
++ /* DRAM space 1 - 2 GB DRAM */
++ };
++};
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/3228-ls2088a-add-ls2088a-its.patch b/target/linux/layerscape/patches-4.4/3228-ls2088a-add-ls2088a-its.patch
new file mode 100644
index 0000000000..7fb9b17d43
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/3228-ls2088a-add-ls2088a-its.patch
@@ -0,0 +1,138 @@
+From e0f9ccd657893d1a10dfbae291900b3045c471fc Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Mon, 7 Nov 2016 10:38:51 +0800
+Subject: [PATCH 228/238] ls2088a: add ls2088a its
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ kernel2088a-qds.its | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ kernel2088a-rdb.its | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++
+ 2 files changed, 110 insertions(+)
+ create mode 100644 kernel2088a-qds.its
+ create mode 100644 kernel2088a-rdb.its
+
+diff --git a/kernel2088a-qds.its b/kernel2088a-qds.its
+new file mode 100644
+index 0000000..4732954
+--- /dev/null
++++ b/kernel2088a-qds.its
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++/ {
++ description = "QDS Image file for the LS2080A Linux Kernel";
++ #address-cells = <1>;
++
++ images {
++ kernel@1 {
++ description = "ARM64 Linux kernel";
++ data = /incbin/("./arch/arm64/boot/Image.gz");
++ type = "kernel";
++ arch = "arm64";
++ os = "linux";
++ compression = "gzip";
++ load = <0x80080000>;
++ entry = <0x80080000>;
++ };
++ fdt@1 {
++ description = "Flattened Device Tree blob";
++ data = /incbin/("./arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dtb");
++ type = "flat_dt";
++ arch = "arm64";
++ compression = "none";
++ load = <0x90000000>;
++ };
++ ramdisk@1 {
++ description = "LS2 Ramdisk";
++ data = /incbin/("./fsl-image-core-ls2088aqds.ext2.gz");
++ type = "ramdisk";
++ arch = "arm64";
++ os = "linux";
++ compression = "none";
++ };
++ };
++
++ configurations {
++ default = "config@1";
++ config@1 {
++ description = "Boot Linux kernel";
++ kernel = "kernel@1";
++ fdt = "fdt@1";
++ ramdisk = "ramdisk@1";
++ };
++ };
++};
+diff --git a/kernel2088a-rdb.its b/kernel2088a-rdb.its
+new file mode 100644
+index 0000000..151241f
+--- /dev/null
++++ b/kernel2088a-rdb.its
+@@ -0,0 +1,55 @@
++/*
++ * Copyright (C) 2016, Freescale Semiconductor
++ *
++ * Abhimanyu Saini <abhimanyu.saini@nxp.com>
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2. This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++/dts-v1/;
++
++/ {
++ description = "RDB Image file for the LS2080A Linux Kernel";
++ #address-cells = <1>;
++
++ images {
++ kernel@1 {
++ description = "ARM64 Linux kernel";
++ data = /incbin/("./arch/arm64/boot/Image.gz");
++ type = "kernel";
++ arch = "arm64";
++ os = "linux";
++ compression = "gzip";
++ load = <0x80080000>;
++ entry = <0x80080000>;
++ };
++ fdt@1 {
++ description = "Flattened Device Tree blob";
++ data = /incbin/("./arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dtb");
++ type = "flat_dt";
++ arch = "arm64";
++ compression = "none";
++ load = <0x90000000>;
++ };
++ ramdisk@1 {
++ description = "LS2 Ramdisk";
++ data = /incbin/("./fsl-image-core-ls2088ardb.ext2.gz");
++ type = "ramdisk";
++ arch = "arm64";
++ os = "linux";
++ compression = "none";
++ };
++ };
++
++ configurations {
++ default = "config@1";
++ config@1 {
++ description = "Boot Linux kernel";
++ kernel = "kernel@1";
++ fdt = "fdt@1";
++ ramdisk = "ramdisk@1";
++ };
++ };
++};
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/4234-fsl-ifc-fix-compilation-error-when-COMPAT-not-enable.patch b/target/linux/layerscape/patches-4.4/4234-fsl-ifc-fix-compilation-error-when-COMPAT-not-enable.patch
new file mode 100644
index 0000000000..f3079a51d6
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/4234-fsl-ifc-fix-compilation-error-when-COMPAT-not-enable.patch
@@ -0,0 +1,34 @@
+From 6183d512e7539033ccfd177d5f5819302d1fda99 Mon Sep 17 00:00:00 2001
+From: Lijun Pan <Lijun.Pan@freescale.com>
+Date: Wed, 23 Sep 2015 17:06:01 -0500
+Subject: [PATCH 234/238] fsl-ifc: fix compilation error when COMPAT not
+ enabled
+
+When CONFIG_COMPAT is not enabled for cases when 64K pages
+are enabled, there are a series of include dependencies that
+result in some definitions in sched.h that get missed (e.g.
+ TASK_NORMAL). Explictly include sched.h to resolve this.
+(This seems to be what other drivers do as well)
+
+Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
+[Stuart: updated subject and commit message]
+Signed-off-by: Stuart Yoder <stuart.yoder@freescale.com>
+---
+ drivers/memory/fsl_ifc.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c
+index 03584dc..32c7752 100644
+--- a/drivers/memory/fsl_ifc.c
++++ b/drivers/memory/fsl_ifc.c
+@@ -35,6 +35,7 @@
+ #include <linux/irqdomain.h>
+ #include <linux/of_address.h>
+ #include <linux/of_irq.h>
++#include <linux/sched.h>
+
+ struct fsl_ifc_ctrl *fsl_ifc_ctrl_dev;
+ EXPORT_SYMBOL(fsl_ifc_ctrl_dev);
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8229-drivers-clk-qoriq-Add-ls2088a-key-to-chipinfo-table.patch b/target/linux/layerscape/patches-4.4/8229-drivers-clk-qoriq-Add-ls2088a-key-to-chipinfo-table.patch
new file mode 100644
index 0000000000..5c1fcd010b
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8229-drivers-clk-qoriq-Add-ls2088a-key-to-chipinfo-table.patch
@@ -0,0 +1,35 @@
+From cb8a47d43caa2b07a62d81ee0b65c0d16560c276 Mon Sep 17 00:00:00 2001
+From: Abhimanyu Saini <abhimanyu.saini@nxp.com>
+Date: Fri, 3 Jun 2016 13:15:28 +0530
+Subject: [PATCH 229/238] drivers: clk: qoriq: Add ls2088a key to chipinfo
+ table
+
+---
+ drivers/clk/clk-qoriq.c | 11 +++++++++++
+ 1 file changed, 11 insertions(+)
+
+diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
+index 164ac41..6185d6a 100644
+--- a/drivers/clk/clk-qoriq.c
++++ b/drivers/clk/clk-qoriq.c
+@@ -559,6 +559,17 @@ static const struct clockgen_chipinfo chipinfo[] = {
+ .flags = CG_VER3 | CG_LITTLE_ENDIAN,
+ },
+ {
++ .compat = "fsl,ls2088a-clockgen",
++ .cmux_groups = {
++ &clockgen2_cmux_cga12, &clockgen2_cmux_cgb
++ },
++ .cmux_to_group = {
++ 0, 0, 1, 1, -1
++ },
++ .pll_mask = 0x37,
++ .flags = CG_VER3 | CG_LITTLE_ENDIAN,
++ },
++ {
+ .compat = "fsl,p2041-clockgen",
+ .guts_compat = "fsl,qoriq-device-config-1.0",
+ .init_periph = p2041_init_periph,
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8230-layerscape-pci-fix-linkup-issue.patch b/target/linux/layerscape/patches-4.4/8230-layerscape-pci-fix-linkup-issue.patch
new file mode 100644
index 0000000000..0feb800367
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8230-layerscape-pci-fix-linkup-issue.patch
@@ -0,0 +1,42 @@
+From 1b23a4e0f03063f823ea38065c1106f62a56b408 Mon Sep 17 00:00:00 2001
+From: Mingkai Hu <mingkai.hu@nxp.com>
+Date: Mon, 7 Nov 2016 15:03:51 +0800
+Subject: [PATCH 230/238] layerscape/pci: fix linkup issue
+
+commit e6612d785198abbb39142e2acb63f9bff26ab718
+[context adjustment]
+
+Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
+Integrated-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/pci/host/pci-layerscape.c | 13 +++++++++----
+ 1 file changed, 9 insertions(+), 4 deletions(-)
+
+diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
+index 00feabf..f85ebcf 100644
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -158,11 +158,16 @@ static void ls1021_pcie_host_init(struct pcie_port *pp)
+ static int ls_pcie_link_up(struct pcie_port *pp)
+ {
+ struct ls_pcie *pcie = to_ls_pcie(pp);
+- u32 state;
++ u32 state, offset;
++
++ if (of_get_property(pp->dev->of_node, "fsl,lut_diff", NULL))
++ offset = 0x407fc;
++ else
++ offset = PCIE_LUT_DBG;
+
+- state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
+- pcie->drvdata->ltssm_shift) &
+- LTSSM_STATE_MASK;
++ state = (ioread32(pcie->lut + offset) >>
++ pcie->drvdata->ltssm_shift) &
++ LTSSM_STATE_MASK;
+
+ if (state < LTSSM_PCIE_L0)
+ return 0;
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8231-driver-clk-qoriq-Add-ls2088a-clk-support.patch b/target/linux/layerscape/patches-4.4/8231-driver-clk-qoriq-Add-ls2088a-clk-support.patch
new file mode 100644
index 0000000000..e98e5022ab
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8231-driver-clk-qoriq-Add-ls2088a-clk-support.patch
@@ -0,0 +1,25 @@
+From c62b4977614e133acc95c61237bcc8fe30581d13 Mon Sep 17 00:00:00 2001
+From: "ying.zhang" <ying.zhang22455@nxp.com>
+Date: Thu, 22 Dec 2016 23:29:39 +0800
+Subject: [PATCH 231/238] driver: clk: qoriq: Add ls2088a clk support
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>wq
+---
+ drivers/clk/clk-qoriq.c | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/drivers/clk/clk-qoriq.c b/drivers/clk/clk-qoriq.c
+index 6185d6a..efaa9c1 100644
+--- a/drivers/clk/clk-qoriq.c
++++ b/drivers/clk/clk-qoriq.c
+@@ -1339,6 +1339,7 @@ CLK_OF_DECLARE(qoriq_clockgen_ls1043a, "fsl,ls1043a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls1046a, "fsl,ls1046a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls2080a, "fsl,ls2080a-clockgen", clockgen_init);
+ CLK_OF_DECLARE(qoriq_clockgen_ls1012a, "fsl,ls1012a-clockgen", clockgen_init);
++CLK_OF_DECLARE(qoriq_clockgen_ls2088a, "fsl,ls2088a-clockgen", clockgen_init);
+
+ /* Legacy nodes */
+ CLK_OF_DECLARE(qoriq_sysclk_1, "fsl,qoriq-sysclk-1.0", sysclk_init);
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option-to-skip-disabling-PCA954x-Mux.patch b/target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option-to-skip-disabling-PCA954x-Mux.patch
new file mode 100644
index 0000000000..0967aeb698
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8233-i2c-pca954x-Add-option-to-skip-disabling-PCA954x-Mux.patch
@@ -0,0 +1,110 @@
+From a4be9046c3a3fc39a06089553df8cc19a2abd814 Mon Sep 17 00:00:00 2001
+From: Priyanka Jain <Priyanka.Jain@freescale.com>
+Date: Tue, 3 Nov 2015 11:25:24 +0530
+Subject: [PATCH 233/238] i2c: pca954x: Add option to skip disabling PCA954x
+ Mux device
+
+On some Layerscape boards like LS2085ARDB/LS2080ARDB,
+input pull-up resistors on PCA954x Mux device are
+missing on board. So, if mux are disabled after powered-on,
+input lines will float leading to incorrect functionality.
+
+Hence, PCA954x Mux device should never be turned-off after
+power-on.
+
+Add option to skip disabling PCA954x Mux device
+if device tree contians "i2c-mux-never-disable" property
+for pca954x device node.
+
+Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
+---
+ drivers/i2c/muxes/i2c-mux-pca954x.c | 38 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 38 insertions(+)
+
+diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
+index acfcef3..386f86f 100644
+--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
++++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
+@@ -63,6 +63,7 @@ struct pca954x {
+ struct i2c_adapter *virt_adaps[PCA954X_MAX_NCHANS];
+
+ u8 last_chan; /* last register value */
++ u8 disable_mux; /* do not disable mux if val not 0 */
+ };
+
+ struct chip_desc {
+@@ -174,6 +175,13 @@ static int pca954x_deselect_mux(struct i2c_adapter *adap,
+ {
+ struct pca954x *data = i2c_get_clientdata(client);
+
++#ifdef CONFIG_ARCH_LAYERSCAPE
++ if (data->disable_mux != 0)
++ data->last_chan = chips[data->type].nchans;
++ else
++ data->last_chan = 0;
++ return pca954x_reg_write(adap, client, data->disable_mux);
++#endif
+ /* Deselect active channel */
+ data->last_chan = 0;
+ return pca954x_reg_write(adap, client, data->last_chan);
+@@ -201,6 +209,23 @@ static int pca954x_probe(struct i2c_client *client,
+ if (!data)
+ return -ENOMEM;
+
++#ifdef CONFIG_ARCH_LAYERSCAPE
++ /* The point here is that you must not disable a mux if there
++ * are no pullups on the input or you mess up the I2C. This
++ * needs to be put into the DTS really as the kernel cannot
++ * know this otherwise.
++ */
++ data->type = id->driver_data;
++ data->disable_mux = of_node &&
++ of_property_read_bool(of_node, "i2c-mux-never-disable") &&
++ chips[data->type].muxtype == pca954x_ismux ?
++ chips[data->type].enable : 0;
++ /* force the first selection */
++ if (data->disable_mux != 0)
++ data->last_chan = chips[data->type].nchans;
++ else
++ data->last_chan = 0;
++#endif
+ i2c_set_clientdata(client, data);
+
+ /* Get the mux out of reset if a reset GPIO is specified. */
+@@ -212,13 +237,19 @@ static int pca954x_probe(struct i2c_client *client,
+ * that the mux is in fact present. This also
+ * initializes the mux to disconnected state.
+ */
++#ifdef CONFIG_ARCH_LAYERSCAPE
++ if (i2c_smbus_write_byte(client, data->disable_mux) < 0) {
++#else
+ if (i2c_smbus_write_byte(client, 0) < 0) {
++#endif
+ dev_warn(&client->dev, "probe failed\n");
+ return -ENODEV;
+ }
+
++#ifndef CONFIG_ARCH_LAYERSCAPE
+ data->type = id->driver_data;
+ data->last_chan = 0; /* force the first selection */
++#endif
+
+ idle_disconnect_dt = of_node &&
+ of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
+@@ -289,6 +320,13 @@ static int pca954x_resume(struct device *dev)
+ struct i2c_client *client = to_i2c_client(dev);
+ struct pca954x *data = i2c_get_clientdata(client);
+
++#ifdef CONFIG_ARCH_LAYERSCAPE
++ if (data->disable_mux != 0)
++ data->last_chan = chips[data->type].nchans;
++ else
++ data->last_chan = 0;
++ return i2c_smbus_write_byte(client, data->disable_mux);
++#endif
+ data->last_chan = 0;
+ return i2c_smbus_write_byte(client, 0);
+ }
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8235-pci-layerscape-fix-pci-lut-offset-issue.patch b/target/linux/layerscape/patches-4.4/8235-pci-layerscape-fix-pci-lut-offset-issue.patch
new file mode 100644
index 0000000000..be91046ac1
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8235-pci-layerscape-fix-pci-lut-offset-issue.patch
@@ -0,0 +1,38 @@
+From 2f3ea65dc8909cbf4116bd74b3dea8d25749508f Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Wed, 23 Nov 2016 11:29:45 +0800
+Subject: [PATCH 235/238] pci/layerscape: fix pci lut offset issue
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/pci/host/pci-layerscape.c | 13 ++++---------
+ 1 file changed, 4 insertions(+), 9 deletions(-)
+
+diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
+index f85ebcf..00feabf 100644
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -158,16 +158,11 @@ static void ls1021_pcie_host_init(struct pcie_port *pp)
+ static int ls_pcie_link_up(struct pcie_port *pp)
+ {
+ struct ls_pcie *pcie = to_ls_pcie(pp);
+- u32 state, offset;
+-
+- if (of_get_property(pp->dev->of_node, "fsl,lut_diff", NULL))
+- offset = 0x407fc;
+- else
+- offset = PCIE_LUT_DBG;
++ u32 state;
+
+- state = (ioread32(pcie->lut + offset) >>
+- pcie->drvdata->ltssm_shift) &
+- LTSSM_STATE_MASK;
++ state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
++ pcie->drvdata->ltssm_shift) &
++ LTSSM_STATE_MASK;
+
+ if (state < LTSSM_PCIE_L0)
+ return 0;
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8236-clk-add-API-of-clks.patch b/target/linux/layerscape/patches-4.4/8236-clk-add-API-of-clks.patch
new file mode 100644
index 0000000000..f5947f7e06
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8236-clk-add-API-of-clks.patch
@@ -0,0 +1,84 @@
+From df2373ca941741f3f66750241a048ad4e2ff2c91 Mon Sep 17 00:00:00 2001
+From: Zhao Qiang <qiang.zhao@nxp.com>
+Date: Thu, 24 Nov 2016 11:47:45 +0800
+Subject: [PATCH 236/238] clk: add API of clks
+
+Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
+---
+ drivers/clk/clk.c | 19 +++++++++++++++++++
+ include/linux/clk-provider.h | 1 +
+ include/linux/clk.h | 9 +++++++++
+ 3 files changed, 29 insertions(+)
+
+diff --git a/drivers/clk/clk.c b/drivers/clk/clk.c
+index f13c3f4..0f6bcf5 100644
+--- a/drivers/clk/clk.c
++++ b/drivers/clk/clk.c
+@@ -359,6 +359,19 @@ static struct clk_core *clk_core_get_parent_by_index(struct clk_core *core,
+ return core->parents[index];
+ }
+
++struct clk *clk_get_parent_by_index(struct clk *clk, u8 index)
++{
++ struct clk_core *parent;
++
++ if (!clk)
++ return NULL;
++
++ parent = clk_core_get_parent_by_index(clk->core, index);
++
++ return !parent ? NULL : parent->hw->clk;
++}
++EXPORT_SYMBOL_GPL(clk_get_parent_by_index);
++
+ struct clk_hw *
+ clk_hw_get_parent_by_index(const struct clk_hw *hw, unsigned int index)
+ {
+@@ -2033,6 +2046,12 @@ static const struct file_operations clk_summary_fops = {
+ .release = single_release,
+ };
+
++unsigned int clk_get_num_parents(struct clk *clk)
++{
++ return !clk ? 0 : clk->core->num_parents;
++}
++EXPORT_SYMBOL_GPL(clk_get_num_parents);
++
+ static void clk_dump_one(struct seq_file *s, struct clk_core *c, int level)
+ {
+ if (!c)
+diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h
+index 7cd0171..77dfd61 100644
+--- a/include/linux/clk-provider.h
++++ b/include/linux/clk-provider.h
+@@ -650,6 +650,7 @@ unsigned int clk_hw_get_num_parents(const struct clk_hw *hw);
+ struct clk_hw *clk_hw_get_parent(const struct clk_hw *hw);
+ struct clk_hw *clk_hw_get_parent_by_index(const struct clk_hw *hw,
+ unsigned int index);
++struct clk *clk_get_parent_by_index(struct clk *clk, u8 index);
+ unsigned int __clk_get_enable_count(struct clk *clk);
+ unsigned long clk_hw_get_rate(const struct clk_hw *hw);
+ unsigned long __clk_get_flags(struct clk *clk);
+diff --git a/include/linux/clk.h b/include/linux/clk.h
+index 0df4a51..1df90e3 100644
+--- a/include/linux/clk.h
++++ b/include/linux/clk.h
+@@ -392,6 +392,15 @@ int clk_set_parent(struct clk *clk, struct clk *parent);
+ struct clk *clk_get_parent(struct clk *clk);
+
+ /**
++ * clk_get_num_parents - get number of possible parents
++ * @clk: clock source
++ *
++ * Returns the number of possible parents of this clock,
++ * which can then be enumerated using clk_get_parent_by_index().
++ */
++unsigned int clk_get_num_parents(struct clk *clk);
++
++/**
+ * clk_get_sys - get a clock based upon the device name
+ * @dev_id: device name
+ * @con_id: connection ID
+--
+1.7.9.5
+
diff --git a/target/linux/layerscape/patches-4.4/8237-pcie-ls208x-use-unified-compatible-fsl-ls2080a-pcie-.patch b/target/linux/layerscape/patches-4.4/8237-pcie-ls208x-use-unified-compatible-fsl-ls2080a-pcie-.patch
new file mode 100644
index 0000000000..08e1ecba9a
--- /dev/null
+++ b/target/linux/layerscape/patches-4.4/8237-pcie-ls208x-use-unified-compatible-fsl-ls2080a-pcie-.patch
@@ -0,0 +1,103 @@
+From 562f1311b529d81662ed41786b8d240db2e2ff51 Mon Sep 17 00:00:00 2001
+From: Shengzhou Liu <Shengzhou.Liu@nxp.com>
+Date: Tue, 6 Dec 2016 15:30:39 +0800
+Subject: [PATCH 237/238] pcie/ls208x: use unified compatible
+ "fsl,ls2080a-pcie" for ls208x
+
+To avoid unnecessary reduplication, let's use unified compatible
+"fsl,ls2080a-pcie" for ls2080a, ls2085a, ls2088a.
+
+This patch fixes issue of pcie not working on ls2088a.
+
+Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com>
+---
+ arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 12 ++++--------
+ drivers/pci/host/pci-layerscape.c | 13 ++++++++-----
+ 2 files changed, 12 insertions(+), 13 deletions(-)
+
+diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+index bd69942..07c917b 100644
+--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
++++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+@@ -513,8 +513,7 @@
+ };
+
+ pcie1: pcie@3400000 {
+- compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+- "fsl,ls2085a-pcie", "snps,dw-pcie";
++ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
+ 0x20 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+@@ -539,8 +538,7 @@
+ };
+
+ pcie2: pcie@3500000 {
+- compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
+- "fsl,ls2085a-pcie", "snps,dw-pcie";
++ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
+ 0x28 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+@@ -565,8 +563,7 @@
+ };
+
+ pcie3: pcie@3600000 {
+- compatible = "fsl,ls2088a-pcie", "fsl,ls2080a-pcie",
+- "fsl,ls2085a-pcie", "snps,dw-pcie";
++ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
+ 0x30 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+@@ -591,8 +588,7 @@
+ };
+
+ pcie4: pcie@3700000 {
+- compatible = "fsl,ls2080a-pcie", "fsl,ls2080a-pcie",
+- "fsl,ls2085a-pcie", "snps,dw-pcie";
++ compatible = "fsl,ls2080a-pcie", "snps,dw-pcie";
+ reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */
+ 0x38 0x00000000 0x0 0x00002000>; /* configuration space */
+ reg-names = "regs", "config";
+diff --git a/drivers/pci/host/pci-layerscape.c b/drivers/pci/host/pci-layerscape.c
+index 00feabf..3e2100d 100644
+--- a/drivers/pci/host/pci-layerscape.c
++++ b/drivers/pci/host/pci-layerscape.c
+@@ -158,9 +158,14 @@ static void ls1021_pcie_host_init(struct pcie_port *pp)
+ static int ls_pcie_link_up(struct pcie_port *pp)
+ {
+ struct ls_pcie *pcie = to_ls_pcie(pp);
+- u32 state;
++ u32 state, offset;
++
++ if (of_get_property(pp->dev->of_node, "fsl,lut_diff", NULL))
++ offset = 0x407fc;
++ else
++ offset = pcie->drvdata->lut_dbg;
+
+- state = (ioread32(pcie->lut + pcie->drvdata->lut_dbg) >>
++ state = (ioread32(pcie->lut + offset) >>
+ pcie->drvdata->ltssm_shift) &
+ LTSSM_STATE_MASK;
+
+@@ -261,7 +266,6 @@ static const struct of_device_id ls_pcie_of_match[] = {
+ { .compatible = "fsl,ls1046a-pcie", .data = &ls1046_drvdata },
+ { .compatible = "fsl,ls1088a-pcie", .data = &ls1088_drvdata },
+ { .compatible = "fsl,ls2080a-pcie", .data = &ls2080_drvdata },
+- { .compatible = "fsl,ls2085a-pcie", .data = &ls2080_drvdata },
+ { },
+ };
+ MODULE_DEVICE_TABLE(of, ls_pcie_of_match);
+@@ -315,8 +319,7 @@ static int __init ls_pcie_probe(struct platform_device *pdev)
+ if (!ls_pcie_is_bridge(pcie))
+ return -ENODEV;
+
+- if (of_device_is_compatible(pdev->dev.of_node, "fsl,ls2085a-pcie") ||
+- of_device_is_compatible(pdev->dev.of_node, "fsl,ls2080a-pcie") ||
++ if (of_device_is_compatible(pdev->dev.of_node, "fsl,ls2080a-pcie") ||
+ of_device_is_compatible(pdev->dev.of_node, "fsl,ls1088a-pcie")) {
+ int len;
+ const u32 *prop;
+--
+1.7.9.5
+