aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch')
-rw-r--r--target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch351
1 files changed, 351 insertions, 0 deletions
diff --git a/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch b/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch
new file mode 100644
index 0000000000..9d548d5f8f
--- /dev/null
+++ b/target/linux/layerscape/patches-5.4/803-clock-0001-clk-ls1028a-Add-clock-driver-for-Display-output-inte.patch
@@ -0,0 +1,351 @@
+From e9e60d44268e2cfba73efeb7c3e68c355940f2c3 Mon Sep 17 00:00:00 2001
+From: Wen He <wen.he_1@nxp.com>
+Date: Wed, 27 Nov 2019 11:19:26 +0800
+Subject: [PATCH] clk: ls1028a: Add clock driver for Display output interface
+
+Add clock driver for QorIQ LS1028A Display output interfaces(LCD, DPHY),
+as implemented in TSMC CLN28HPM PLL, this PLL supports the programmable
+integer division and range of the display output pixel clock's 27-594MHz.
+
+Signed-off-by: Wen He <wen.he_1@nxp.com>
+Signed-off-by: Michael Walle <michael@walle.cc>
+---
+ drivers/clk/Kconfig | 10 ++
+ drivers/clk/Makefile | 1 +
+ drivers/clk/clk-plldig.c | 301 +++++++++++++++++++++++++++++++++++++++++++++++
+ 3 files changed, 312 insertions(+)
+ create mode 100644 drivers/clk/clk-plldig.c
+
+--- a/drivers/clk/Kconfig
++++ b/drivers/clk/Kconfig
+@@ -218,6 +218,16 @@ config CLK_QORIQ
+ This adds the clock driver support for Freescale QorIQ platforms
+ using common clock framework.
+
++config CLK_LS1028A_PLLDIG
++ tristate "Clock driver for LS1028A Display output"
++ depends on ARCH_LAYERSCAPE || COMPILE_TEST
++ default ARCH_LAYERSCAPE
++ help
++ This driver support the Display output interfaces(LCD, DPHY) pixel clocks
++ of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all
++ features of the PLL are currently supported by the driver. By default,
++ configured bypass mode with this PLL.
++
+ config COMMON_CLK_XGENE
+ bool "Clock driver for APM XGene SoC"
+ default ARCH_XGENE
+--- a/drivers/clk/Makefile
++++ b/drivers/clk/Makefile
+@@ -43,6 +43,7 @@ obj-$(CONFIG_ARCH_NPCM7XX) += clk-n
+ obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
+ obj-$(CONFIG_COMMON_CLK_OXNAS) += clk-oxnas.o
+ obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
++obj-$(CONFIG_CLK_LS1028A_PLLDIG) += clk-plldig.o
+ obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
+ obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
+ obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
+--- /dev/null
++++ b/drivers/clk/clk-plldig.c
+@@ -0,0 +1,301 @@
++// SPDX-License-Identifier: GPL-2.0
++/*
++ * Copyright 2019 NXP
++ *
++ * Clock driver for LS1028A Display output interfaces(LCD, DPHY).
++ */
++
++#include <linux/clk-provider.h>
++#include <linux/device.h>
++#include <linux/module.h>
++#include <linux/err.h>
++#include <linux/io.h>
++#include <linux/iopoll.h>
++#include <linux/of.h>
++#include <linux/of_address.h>
++#include <linux/of_device.h>
++#include <linux/platform_device.h>
++#include <linux/slab.h>
++#include <linux/bitfield.h>
++
++/* PLLDIG register offsets and bit masks */
++#define PLLDIG_REG_PLLSR 0x24
++#define PLLDIG_LOCK_MASK BIT(2)
++#define PLLDIG_REG_PLLDV 0x28
++#define PLLDIG_MFD_MASK GENMASK(7, 0)
++#define PLLDIG_RFDPHI1_MASK GENMASK(30, 25)
++#define PLLDIG_REG_PLLFM 0x2c
++#define PLLDIG_SSCGBYP_ENABLE BIT(30)
++#define PLLDIG_REG_PLLFD 0x30
++#define PLLDIG_FDEN BIT(30)
++#define PLLDIG_FRAC_MASK GENMASK(15, 0)
++#define PLLDIG_DTH_MASK GENMASK(17, 16)
++#define PLLDIG_DTH_DISABLE 3
++#define PLLDIG_REG_PLLCAL1 0x38
++#define PLLDIG_REG_PLLCAL2 0x3c
++
++/* Range of the VCO frequencies, in Hz */
++#define PLLDIG_MIN_VCO_FREQ 650000000
++#define PLLDIG_MAX_VCO_FREQ 1300000000
++
++/* Range of the output frequencies, in Hz */
++#define PHI1_MIN_FREQ 27000000
++#define PHI1_MAX_FREQ 600000000
++
++/* Maximum value of the reduced frequency divider */
++#define MAX_RFDPHI1 63UL
++
++/* Best value of multiplication factor divider */
++#define PLLDIG_DEFAULT_MFD 44
++
++/*
++ * Denominator part of the fractional part of the
++ * loop multiplication factor.
++ */
++#define MFDEN 20480
++
++static const struct clk_parent_data parent_data[] = {
++ {.index = 0},
++};
++
++struct clk_plldig {
++ struct clk_hw hw;
++ void __iomem *regs;
++ unsigned int vco_freq;
++};
++
++#define to_clk_plldig(_hw) container_of(_hw, struct clk_plldig, hw)
++
++static int plldig_enable(struct clk_hw *hw)
++{
++ struct clk_plldig *data = to_clk_plldig(hw);
++ u32 val;
++
++ val = readl(data->regs + PLLDIG_REG_PLLFM);
++ /*
++ * Use Bypass mode with PLL off by default, the frequency overshoot
++ * detector output was disable. SSCG Bypass mode should be enable.
++ */
++ val |= PLLDIG_SSCGBYP_ENABLE;
++ writel(val, data->regs + PLLDIG_REG_PLLFM);
++
++ return 0;
++}
++
++static void plldig_disable(struct clk_hw *hw)
++{
++ struct clk_plldig *data = to_clk_plldig(hw);
++ u32 val;
++
++ val = readl(data->regs + PLLDIG_REG_PLLFM);
++
++ val &= ~PLLDIG_SSCGBYP_ENABLE;
++ val |= FIELD_PREP(PLLDIG_SSCGBYP_ENABLE, 0x0);
++
++ writel(val, data->regs + PLLDIG_REG_PLLFM);
++}
++
++static int plldig_is_enabled(struct clk_hw *hw)
++{
++ struct clk_plldig *data = to_clk_plldig(hw);
++
++ return (readl(data->regs + PLLDIG_REG_PLLFM) &
++ PLLDIG_SSCGBYP_ENABLE);
++}
++
++static unsigned long plldig_recalc_rate(struct clk_hw *hw,
++ unsigned long parent_rate)
++{
++ struct clk_plldig *data = to_clk_plldig(hw);
++ u32 val, rfdphi1;
++
++ val = readl(data->regs + PLLDIG_REG_PLLDV);
++
++ /* Check if PLL is bypassed */
++ if (val & PLLDIG_SSCGBYP_ENABLE)
++ return parent_rate;
++
++ rfdphi1 = FIELD_GET(PLLDIG_RFDPHI1_MASK, val);
++
++ /*
++ * If RFDPHI1 has a value of 1 the VCO frequency is also divided by
++ * one.
++ */
++ if (!rfdphi1)
++ rfdphi1 = 1;
++
++ return DIV_ROUND_UP(data->vco_freq, rfdphi1);
++}
++
++static unsigned long plldig_calc_target_div(unsigned long vco_freq,
++ unsigned long target_rate)
++{
++ unsigned long div;
++
++ div = DIV_ROUND_CLOSEST(vco_freq, target_rate);
++ div = max(1UL, div);
++ div = min(div, MAX_RFDPHI1);
++
++ return div;
++}
++
++static int plldig_determine_rate(struct clk_hw *hw,
++ struct clk_rate_request *req)
++{
++ struct clk_plldig *data = to_clk_plldig(hw);
++ unsigned int div;
++
++ if (req->rate < PHI1_MIN_FREQ)
++ req->rate = PHI1_MIN_FREQ;
++ if (req->rate > PHI1_MAX_FREQ)
++ req->rate = PHI1_MAX_FREQ;
++
++ div = plldig_calc_target_div(data->vco_freq, req->rate);
++ req->rate = DIV_ROUND_UP(data->vco_freq, div);
++
++ return 0;
++}
++
++static int plldig_set_rate(struct clk_hw *hw, unsigned long rate,
++ unsigned long parent_rate)
++{
++ struct clk_plldig *data = to_clk_plldig(hw);
++ unsigned int val, cond;
++ unsigned int rfdphi1;
++
++ if (rate < PHI1_MIN_FREQ)
++ rate = PHI1_MIN_FREQ;
++ if (rate > PHI1_MAX_FREQ)
++ rate = PHI1_MAX_FREQ;
++
++ rfdphi1 = plldig_calc_target_div(data->vco_freq, rate);
++
++ /* update the divider value */
++ val = readl(data->regs + PLLDIG_REG_PLLDV);
++ val &= ~PLLDIG_RFDPHI1_MASK;
++ val |= FIELD_PREP(PLLDIG_RFDPHI1_MASK, rfdphi1);
++ writel(val, data->regs + PLLDIG_REG_PLLDV);
++
++ /* delay 200us make sure that old lock state is cleared */
++ udelay(200);
++
++ /* Wait until PLL is locked or timeout (maximum 1000 usecs) */
++ return readl_poll_timeout_atomic(data->regs + PLLDIG_REG_PLLSR, cond,
++ cond & PLLDIG_LOCK_MASK, 0,
++ USEC_PER_MSEC);
++}
++
++static const struct clk_ops plldig_clk_ops = {
++ .enable = plldig_enable,
++ .disable = plldig_disable,
++ .is_enabled = plldig_is_enabled,
++ .recalc_rate = plldig_recalc_rate,
++ .determine_rate = plldig_determine_rate,
++ .set_rate = plldig_set_rate,
++};
++
++static int plldig_init(struct clk_hw *hw)
++{
++ struct clk_plldig *data = to_clk_plldig(hw);
++ struct clk_hw *parent = clk_hw_get_parent(hw);
++ unsigned long parent_rate = clk_hw_get_rate(parent);
++ unsigned long val;
++ unsigned long long lltmp;
++ unsigned int mfd, fracdiv = 0;
++
++ if (!parent)
++ return -EINVAL;
++
++ if (data->vco_freq) {
++ mfd = data->vco_freq / parent_rate;
++ lltmp = data->vco_freq % parent_rate;
++ lltmp *= MFDEN;
++ do_div(lltmp, parent_rate);
++ fracdiv = lltmp;
++ } else {
++ mfd = PLLDIG_DEFAULT_MFD;
++ data->vco_freq = parent_rate * mfd;
++ }
++
++ val = FIELD_PREP(PLLDIG_MFD_MASK, mfd);
++ writel(val, data->regs + PLLDIG_REG_PLLDV);
++
++ if (fracdiv) {
++ val = FIELD_PREP(PLLDIG_FRAC_MASK, fracdiv);
++ /* Enable fractional divider */
++ val |= PLLDIG_FDEN;
++ /* Disable dither */
++ val |= FIELD_PREP(PLLDIG_DTH_MASK, PLLDIG_DTH_DISABLE);
++ writel(val, data->regs + PLLDIG_REG_PLLFD);
++ }
++
++ return 0;
++}
++
++static int plldig_clk_probe(struct platform_device *pdev)
++{
++ struct clk_plldig *data;
++ struct resource *mem;
++ struct device *dev = &pdev->dev;
++ int ret;
++
++ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
++ if (!data)
++ return -ENOMEM;
++
++ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
++ data->regs = devm_ioremap_resource(dev, mem);
++ if (IS_ERR(data->regs))
++ return PTR_ERR(data->regs);
++
++ data->hw.init = CLK_HW_INIT_PARENTS_DATA("dpclk",
++ parent_data,
++ &plldig_clk_ops,
++ 0);
++
++ ret = devm_clk_hw_register(dev, &data->hw);
++ if (ret) {
++ dev_err(dev, "failed to register %s clock\n",
++ dev->of_node->name);
++ return ret;
++ }
++
++ ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get,
++ &data->hw);
++ if (ret) {
++ dev_err(dev, "unable to add clk provider\n");
++ return ret;
++ }
++
++ /*
++ * The frequency of the VCO cannot be changed during runtime.
++ * Therefore, let the user specify a desired frequency.
++ */
++ if (!of_property_read_u32(dev->of_node, "vco-frequency",
++ &data->vco_freq)) {
++ if (data->vco_freq < PLLDIG_MIN_VCO_FREQ ||
++ data->vco_freq > PLLDIG_MAX_VCO_FREQ)
++ return -EINVAL;
++ }
++
++ return plldig_init(&data->hw);
++}
++
++static const struct of_device_id plldig_clk_id[] = {
++ { .compatible = "fsl,ls1028a-plldig"},
++ { }
++};
++MODULE_DEVICE_TABLE(of, plldig_clk_id);
++
++static struct platform_driver plldig_clk_driver = {
++ .driver = {
++ .name = "plldig-clock",
++ .of_match_table = plldig_clk_id,
++ },
++ .probe = plldig_clk_probe,
++};
++module_platform_driver(plldig_clk_driver);
++
++MODULE_LICENSE("GPL v2");
++MODULE_AUTHOR("Wen He <wen.he_1@nxp.com>");
++MODULE_DESCRIPTION("LS1028A Display output interface pixel clock driver");