diff options
Diffstat (limited to 'target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch')
-rw-r--r-- | target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch b/target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch deleted file mode 100644 index 7271c34ab5..0000000000 --- a/target/linux/layerscape/patches-5.4/701-net-0064-memac_init_phy-RGMII-fixed-link-pass-adjust_link-cal.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 79eacb8b197f7459a75c7d3ec33ceef88475d5a1 Mon Sep 17 00:00:00 2001 -From: Vladimir Oltean <vladimir.oltean@nxp.com> -Date: Fri, 4 May 2018 19:23:59 +0300 -Subject: [PATCH] memac_init_phy: RGMII fixed-link: pass adjust_link callback - to of_phy_connect - -* The mEMAC configuration for RGMII is held in the IF_MODE register -* In the driver, IF_MODE is configured in 2 places (both in fman_memac.c): - - fman_memac_init: sets the IF_MODE bit macro IF_MODE_RGMII_AUTO - (this translates to setting ENA = 1 - Enable automatic speed selection - - RGMII PHY in-band status information is used to select the speed - of operation). - - fman_memac_adjust_link: brings the RGMII port in ENA = 0 mode - (link speed not determined autonomously by the MAC, but set according - to SSP). -* The issue with the current code is that in the case of RGMII fixed-link, - the of_phy_attach function is being called, instead of of_phy_connect - with a callback that calls fman_memac_adjust_link. -* For this reason, the RGMII port is left in a state with ENA = 1. In - most (if not all) RGMII fixed-link setups, the link partner will not - send any in-bank link speed information that is expected by the mEMAC. -* The effect is that the link speed setting will probably not be correct - (and will definitely not be according to the "fixed-link" property in - the DTS). -* The adjust_link callback seems to be called by the PHY state machine, - even for fixed links, exactly once: on "link up". Therefore, this - patch ensures that on link up, RGMII fixed links are configured to the - link speed that is set in the DTS, and not left with IF_MODE[ENA] = 1. - -Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> ---- - drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c | 38 ++++++++++++++++++----- - 1 file changed, 31 insertions(+), 7 deletions(-) - ---- a/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c -+++ b/drivers/net/ethernet/freescale/sdk_dpaa/mac-api.c -@@ -502,17 +502,41 @@ static int memac_init_phy(struct net_dev - struct mac_device *mac_dev) - { - struct phy_device *phy_dev; -+ void (*adjust_link_handler)(struct net_device *); - - if ((macdev2enetinterface(mac_dev) == e_ENET_MODE_XGMII_10000) || -- (macdev2enetinterface(mac_dev) == e_ENET_MODE_SGMII_2500) || -- of_phy_is_fixed_link(mac_dev->phy_node)) { -- phy_dev = of_phy_connect(net_dev, mac_dev->phy_node, -- &adjust_link_void, 0, -- mac_dev->phy_if); -+ (macdev2enetinterface(mac_dev) == e_ENET_MODE_SGMII_2500)) { -+ /* Pass a void link state handler to the PHY state machine -+ * for XGMII (10G) and SGMII 2.5G, as the hardware does not -+ * permit dynamic link speed adjustments. */ -+ adjust_link_handler = adjust_link_void; -+ } else if (macdev2enetinterface(mac_dev) & e_ENET_IF_RGMII) { -+ /* Regular RGMII ports connected to a PHY, as well as -+ * ports that are marked as "fixed-link" in the DTS, -+ * will have the adjust_link callback. This calls -+ * fman_memac_adjust_link in order to configure the -+ * IF_MODE register, which is needed in both cases. -+ */ -+ adjust_link_handler = adjust_link; -+ } else if (of_phy_is_fixed_link(mac_dev->phy_node)) { -+ /* Pass a void link state handler for fixed-link -+ * interfaces that are not RGMII. Only RGMII has been -+ * tested and confirmed to work with fixed-link. Other -+ * MII interfaces may need further work. -+ * TODO: Change this as needed. -+ */ -+ adjust_link_handler = adjust_link_void; - } else { -- phy_dev = of_phy_connect(net_dev, mac_dev->phy_node, -- &adjust_link, 0, mac_dev->phy_if); -+ /* MII, RMII, SMII, GMII, SGMII, BASEX ports, -+ * that are NOT fixed-link. -+ * TODO: May not be needed for interfaces that -+ * pass through the SerDes block (*SGMII, XFI). -+ */ -+ adjust_link_handler = adjust_link; - } -+ phy_dev = of_phy_connect(net_dev, mac_dev->phy_node, -+ adjust_link_handler, 0, -+ mac_dev->phy_if); - - if (unlikely(phy_dev == NULL) || IS_ERR(phy_dev)) { - netdev_err(net_dev, "Could not connect to PHY %s\n", |