1 files changed, 0 insertions, 64 deletions
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0100-arm64-dts-ls208xa-Update-qspi-node-properties-for-LS.patch b/target/linux/layerscape/patches-5.4/302-dts-0100-arm64-dts-ls208xa-Update-qspi-node-properties-for-LS.patch
deleted file mode 100644
index 6efbe1ecf1..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0100-arm64-dts-ls208xa-Update-qspi-node-properties-for-LS.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 121cd10d9ec4466b09ac33986c7b4c1f8eff9363 Mon Sep 17 00:00:00 2001
-From: Kuldeep Singh <kuldeep.singh@nxp.com>
-Date: Wed, 18 Dec 2019 15:09:41 +0530
-Subject: [PATCH] arm64: dts: ls208xa: Update qspi node properties for
- LS2088ARDB
-
-LS2088ADB has one spansion flash s25fs512s of size 64M.
-
-Update qspi dts entry for the board using compatibles as "jedec,spi-nor"
-to probe flash successfully. Also, align properties with other board dts
-properties.
-
-Since device properties are different, so remove fsl, ls1021a-qspi.
-ls1021a-qspi is to be used only for Big-endian verion of QSPI
-controller. Use dt-bindings constants in interrupts instead of using
-numbers.
-
-Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 8 ++++----
- arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi     | 6 +++---
- 2 files changed, 7 insertions(+), 7 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
-@@ -110,12 +110,12 @@
- 
- &qspi {
- 	status = "okay";
--	flash0: s25fs512s@0 {
-+
-+	s25fs512s0: flash@0 {
- 		#address-cells = <1>;
- 		#size-cells = <1>;
--		compatible = "spansion,m25p80";
--		m25p,fast-read;
--		spi-max-frequency = <20000000>;
-+		compatible = "jedec,spi-nor";
-+		spi-max-frequency = <50000000>;
- 		reg = <0>;
- 	};
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
-@@ -609,16 +609,16 @@
- 		};
- 
- 		qspi: spi@20c0000 {
--			status = "disabled";
--			compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi";
-+			compatible = "fsl,ls2080a-qspi";
- 			#address-cells = <1>;
- 			#size-cells = <0>;
- 			reg = <0x0 0x20c0000 0x0 0x10000>,
- 			      <0x0 0x20000000 0x0 0x10000000>;
- 			reg-names = "QuadSPI", "QuadSPI-memory";
--			interrupts = <0 25 0x4>; /* Level high type */
-+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- 			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
- 			clock-names = "qspi_en", "qspi";
-+			status = "disabled";
- 		};
- 
- 		pcie1: pcie@3400000 {