1 files changed, 0 insertions, 63 deletions
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0096-arm64-dts-fsl-ls1028a-Disable-eno3-and-make-swp5-the.patch b/target/linux/layerscape/patches-5.4/302-dts-0096-arm64-dts-fsl-ls1028a-Disable-eno3-and-make-swp5-the.patch
deleted file mode 100644
index a1c50bcefb..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0096-arm64-dts-fsl-ls1028a-Disable-eno3-and-make-swp5-the.patch
+++ /dev/null
@@ -1,63 +0,0 @@
-From 9344f58d60a0a53ec39e7c5d75021843e859970f Mon Sep 17 00:00:00 2001
-From: Vladimir Oltean <vladimir.oltean@nxp.com>
-Date: Fri, 29 Nov 2019 03:18:32 +0200
-Subject: [PATCH] arm64: dts: fsl: ls1028a: Disable eno3 and make swp5 the
- Felix CPU port
-
-This patch returns to the switch port setup from BSP 0.2, where the
-switch only had a single Ethernet connection to the CPU, via a tagging
-interface. Choose eno2 for this purpose, as it has higher bandwidth and
-also supports TSN offloads.
-
-The reason is that the switch is not able to do DSA tags on 2 CPU ports
-at the same time, and it is confusing to have so many ports with no
-clear indication which should be used for what (a "data" port and a
-"control" port).
-
-We don't revert to the BSP 0.2 RCW configuration, however. The ENETC
-port 3 is still enabled in the RCW, however it is not probed by Linux by
-default, since the large majority of use cases will not need it. For
-those that do (like originating 802.1CB traffic from the CPU), it can be
-enabled back by simply reverting this device tree change.
-
-Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 6 ++++--
- 1 file changed, 4 insertions(+), 2 deletions(-)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -753,7 +753,7 @@
- 				#address-cells = <1>;
- 				#size-cells = <0>;
- 			};
--			ethernet@0,2 {
-+			enetc_port2: ethernet@0,2 {
- 				compatible = "fsl,enetc";
- 				reg = <0x000200 0 0 0 0>;
- 				fixed-link {
-@@ -792,6 +792,7 @@
- 					/* internal to-cpu ports */
- 					port@4 {
- 						reg = <4>;
-+						ethernet = <&enetc_port2>;
- 						phy-mode = "gmii";
- 
- 						fixed-link {
-@@ -801,7 +802,6 @@
- 					};
- 					port@5 {
- 						reg = <5>;
--						ethernet = <&enetc_port3>;
- 						phy-mode = "gmii";
- 
- 						fixed-link {
-@@ -814,6 +814,8 @@
- 			enetc_port3: ethernet@0,6 {
- 				compatible = "fsl,enetc";
- 				reg = <0x000600 0 0 0 0>;
-+				status = "disabled";
-+
- 				fixed-link {
- 					speed = <1000>;
- 					full-duplex;