1 files changed, 0 insertions, 87 deletions
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch b/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch
deleted file mode 100644
index 84aa2390a8..0000000000
--- a/target/linux/layerscape/patches-5.4/302-dts-0060-arm64-dts-ls1028a-add-flexspi-nodes.patch
+++ /dev/null
@@ -1,87 +0,0 @@
-From b94cbaaa2facfdc6aa49d6f323da251f9e91d4ba Mon Sep 17 00:00:00 2001
-From: Xiaowei Bao <xiaowei.bao@nxp.com>
-Date: Tue, 14 May 2019 18:17:31 +0800
-Subject: [PATCH] arm64: dts: ls1028a: add flexspi nodes
-
-Add fspi node property for LS1028A SoC for FlexSPI driver.
-Property added for the FlexSPI controller and for the connected
-slave device for the LS1028ARDB and LS1028AQDS target.
-This is having one SPI-NOR flash device, mt35xu02g connected at
-CS0.
-
-Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 15 +++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 15 +++++++++++++++
- arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    | 12 ++++++++++++
- 3 files changed, 42 insertions(+)
-
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
-@@ -226,6 +226,21 @@
- 	phy-connection-type = "rgmii-id";
- };
- 
-+&fspi {
-+	status = "okay";
-+	mt35xu02g: flash@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		m25p,fast-read;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
-+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
-+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-+	};
-+};
-+
- &sai1 {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
-@@ -168,6 +168,21 @@
- 	};
- };
- 
-+&fspi {
-+	status = "okay";
-+	mt35xu02g: flash@0 {
-+		compatible = "spansion,m25p80";
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		m25p,fast-read;
-+		spi-max-frequency = <20000000>;
-+		reg = <0>;
-+		/* The following setting enables 1-1-8 (CMD-ADDR-DATA) mode */
-+		spi-rx-bus-width = <8>; /* 8 SPI Rx lines */
-+		spi-tx-bus-width = <1>; /* 1 SPI Tx line */
-+	};
-+};
-+
- &duart0 {
- 	status = "okay";
- };
---- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
-@@ -180,6 +180,18 @@
- 			clocks = <&sysclk>;
- 		};
- 
-+		fspi: spi@20c0000 {
-+			compatible = "nxp,lx2160a-fspi";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0x0 0x20c0000 0x0 0x10000>,
-+			      <0x0 0x20000000 0x0 0x10000000>;
-+			reg-names = "FSPI", "FSPI-memory";
-+			interrupts = <0 25 0x4>; /* Level high type */
-+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-+			clock-names = "fspi_en", "fspi";
-+		};
-+
- 		i2c0: i2c@2000000 {
- 			compatible = "fsl,vf610-i2c";
- 			#address-cells = <1>;