diff options
Diffstat (limited to 'target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch')
| -rw-r--r-- | target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch | 156 |
1 files changed, 0 insertions, 156 deletions
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch b/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch deleted file mode 100644 index 6f3181d65a..0000000000 --- a/target/linux/layerscape/patches-5.4/302-dts-0011-ARM-dts-accumulated-change.patch +++ /dev/null @@ -1,156 +0,0 @@ -From a9f1c1d3e410596d0a39fd92562cc48ef960b1b7 Mon Sep 17 00:00:00 2001 -From: Li Yang <leoyang.li@nxp.com> -Date: Fri, 5 Oct 2018 18:33:49 -0500 -Subject: [PATCH] ARM: dts: accumulated change - -Signed-off-by: Li Yang <leoyang.li@nxp.com> ---- - arch/arm/boot/dts/ls1021a-qds.dts | 15 +++++++++++++++ - arch/arm/boot/dts/ls1021a-twr.dts | 15 +++++++++++++++ - arch/arm/boot/dts/ls1021a.dtsi | 29 ++++++++++++++++++++++++----- - 3 files changed, 54 insertions(+), 5 deletions(-) - ---- a/arch/arm/boot/dts/ls1021a-qds.dts -+++ b/arch/arm/boot/dts/ls1021a-qds.dts -@@ -126,6 +126,21 @@ - }; - }; - -+&qspi { -+ num-cs = <2>; -+ status = "okay"; -+ -+ qflash0: s25fl128s@0 { -+ compatible = "spansion,m25p80"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <20000000>; -+ reg = <0>; -+ spi-rx-bus-width = <4>; -+ spi-tx-bus-width = <4>; -+ }; -+}; -+ - &enet0 { - tbi-handle = <&tbi0>; - phy-handle = <&sgmii_phy1c>; ---- a/arch/arm/boot/dts/ls1021a-twr.dts -+++ b/arch/arm/boot/dts/ls1021a-twr.dts -@@ -144,6 +144,21 @@ - }; - }; - -+&qspi { -+ num-cs = <2>; -+ status = "okay"; -+ -+ qflash0: n25q128a13@0 { -+ compatible = "n25q128a13", "jedec,spi-nor"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ spi-max-frequency = <20000000>; -+ reg = <0>; -+ spi-rx-bus-width = <4>; -+ spi-tx-bus-width = <4>; -+ }; -+}; -+ - &enet0 { - tbi-handle = <&tbi0>; - phy-handle = <&sgmii_phy2>; ---- a/arch/arm/boot/dts/ls1021a.dtsi -+++ b/arch/arm/boot/dts/ls1021a.dtsi -@@ -167,12 +167,13 @@ - ifc: ifc@1530000 { - compatible = "fsl,ifc", "simple-bus"; - reg = <0x0 0x1530000 0x0 0x10000>; -+ big-endian; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - }; - - dcfg: dcfg@1ee0000 { - compatible = "fsl,ls1021a-dcfg", "syscon"; -- reg = <0x0 0x1ee0000 0x0 0x10000>; -+ reg = <0x0 0x1ee0000 0x0 0x1000>; - big-endian; - }; - -@@ -338,7 +339,7 @@ - }; - - i2c0: i2c@2180000 { -- compatible = "fsl,vf610-i2c"; -+ compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2180000 0x0 0x10000>; -@@ -347,11 +348,12 @@ - clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 39>, <&edma0 1 38>; -+ fsl-scl-gpio = <&gpio3 23 0>; - status = "disabled"; - }; - - i2c1: i2c@2190000 { -- compatible = "fsl,vf610-i2c"; -+ compatible = "fsl,vf610-i2c", "fsl,ls1021a-vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2190000 0x0 0x10000>; -@@ -360,6 +362,7 @@ - clocks = <&clockgen 4 1>; - dma-names = "tx", "rx"; - dmas = <&edma0 1 37>, <&edma0 1 36>; -+ fsl-scl-gpio = <&gpio3 23 0>; - status = "disabled"; - }; - -@@ -546,6 +549,16 @@ - status = "disabled"; - }; - -+ ftm0: ftm0@29d0000 { -+ compatible = "fsl,ftm-alarm"; -+ reg = <0x0 0x29d0000 0x0 0x10000>, -+ <0x0 0x1ee2140 0x0 0x4>; -+ reg-names = "ftm", "FlexTimer1"; -+ interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; -+ big-endian; -+ status = "okay"; -+ }; -+ - pwm1: pwm@29e0000 { - compatible = "fsl,vf610-ftm-pwm"; - #pwm-cells = <3>; -@@ -828,6 +841,8 @@ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; -+ usb3-lpm-capable; -+ snps,dis-u1u2-when-u3-quirk; - snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; - }; - -@@ -836,7 +851,9 @@ - reg = <0x00 0x03400000 0x0 0x00010000 /* controller registers */ - 0x40 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; -- interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>; /* controller interrupt */ -+ interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ -+ interrupt-names = "pme", "aer"; - fsl,pcie-scfg = <&scfg 0>; - #address-cells = <3>; - #size-cells = <2>; -@@ -860,7 +877,9 @@ - reg = <0x00 0x03500000 0x0 0x00010000 /* controller registers */ - 0x48 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; -- interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; -+ interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>; /* aer interrupt */ -+ interrupt-names = "pme", "aer"; - fsl,pcie-scfg = <&scfg 1>; - #address-cells = <3>; - #size-cells = <2>; |