diff options
Diffstat (limited to 'target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch')
| -rw-r--r-- | target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch | 149 |
1 files changed, 149 insertions, 0 deletions
diff --git a/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch b/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch new file mode 100644 index 0000000000..97348131ef --- /dev/null +++ b/target/linux/layerscape/patches-5.4/302-dts-0004-arm64-dts-ls1012a-Add-more-nodes-to-LS1012A-FRWY-boa.patch @@ -0,0 +1,149 @@ +From 9ba5a56b7241c46aa47544f8414ad1f3d445f3c1 Mon Sep 17 00:00:00 2001 +From: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> +Date: Mon, 7 May 2018 11:52:04 +0530 +Subject: [PATCH] arm64: dts: ls1012a: Add more nodes to LS1012A-FRWY board + support + +LS1012A-FRWY is a different design from LS1012A-FRDM, +but has some common SoC features. Key feature on this +board is 2x1G SGMII PFE MAC, Micro SD, USB 3.0, DDR, +QuadSPI, Audio, UART. + +Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> +Signed-off-by: Li Yang <leoyang.li@nxp.com> +--- + arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts | 118 +++++++++++++++++++++ + 1 file changed, 118 insertions(+) + +--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts ++++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frwy.dts +@@ -14,6 +14,58 @@ + / { + model = "LS1012A FRWY Board"; + compatible = "fsl,ls1012a-frwy", "fsl,ls1012a"; ++ ++ aliases { ++ ethernet0 = &pfe_mac0; ++ ethernet1 = &pfe_mac1; ++ }; ++ ++ sys_mclk: clock-mclk { ++ compatible = "fixed-clock"; ++ #clock-cells = <0>; ++ clock-frequency = <25000000>; ++ }; ++ ++ reg_1p8v: regulator-1p8v { ++ compatible = "regulator-fixed"; ++ regulator-name = "1P8V"; ++ regulator-min-microvolt = <1800000>; ++ regulator-max-microvolt = <1800000>; ++ regulator-always-on; ++ }; ++ ++ sound { ++ compatible = "simple-audio-card"; ++ simple-audio-card,format = "i2s"; ++ simple-audio-card,widgets = ++ "Microphone", "Microphone Jack", ++ "Headphone", "Headphone Jack", ++ "Speaker", "Speaker Ext", ++ "Line", "Line In Jack"; ++ simple-audio-card,routing = ++ "MIC_IN", "Microphone Jack", ++ "Microphone Jack", "Mic Bias", ++ "LINE_IN", "Line In Jack", ++ "Headphone Jack", "HP_OUT", ++ "Speaker Ext", "LINE_OUT"; ++ ++ simple-audio-card,cpu { ++ sound-dai = <&sai2>; ++ frame-master; ++ bitclock-master; ++ }; ++ ++ simple-audio-card,codec { ++ sound-dai = <&codec>; ++ frame-master; ++ bitclock-master; ++ system-clock-frequency = <25000000>; ++ }; ++ }; ++}; ++ ++&pcie { ++ status = "okay"; + }; + + &duart0 { +@@ -22,4 +74,70 @@ + + &i2c0 { + status = "okay"; ++ ++ codec: sgtl5000@a { ++ compatible = "fsl,sgtl5000"; ++ #sound-dai-cells = <0>; ++ reg = <0xa>; ++ VDDA-supply = <®_1p8v>; ++ VDDIO-supply = <®_1p8v>; ++ clocks = <&sys_mclk>; ++ }; ++}; ++ ++&qspi { ++ num-cs = <1>; ++ bus-num = <0>; ++ status = "okay"; ++ ++ qflash0: w25q16dw@0 { ++ compatible = "spansion,m25p80"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ m25p,fast-read; ++ spi-max-frequency = <20000000>; ++ reg = <0>; ++ }; ++}; ++ ++&pfe { ++ status = "okay"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ethernet@0 { ++ compatible = "fsl,pfe-gemac-port"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x0>; /* GEM_ID */ ++ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ ++ fsl,gemac-phy-id = <0x2>; /* PHY_ID */ ++ fsl,mdio-mux-val = <0x0>; ++ phy-mode = "sgmii"; ++ fsl,pfe-phy-if-flags = <0x0>; ++ ++ mdio@0 { ++ reg = <0x1>; /* enabled/disabled */ ++ }; ++ }; ++ ++ ethernet@1 { ++ compatible = "fsl,pfe-gemac-port"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ reg = <0x1>; /* GEM_ID */ ++ fsl,gemac-bus-id = <0x1>; /* BUS_ID */ ++ fsl,gemac-phy-id = <0x1>; /* PHY_ID */ ++ fsl,mdio-mux-val = <0x0>; ++ phy-mode = "sgmii"; ++ fsl,pfe-phy-if-flags = <0x0>; ++ ++ mdio@0 { ++ reg = <0x0>; /* enabled/disabled */ ++ }; ++ }; ++}; ++ ++&sai2 { ++ status = "okay"; + }; |