diff options
Diffstat (limited to 'target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch')
-rw-r--r-- | target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch | 12036 |
1 files changed, 0 insertions, 12036 deletions
diff --git a/target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch b/target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch deleted file mode 100644 index 71c86e55fd..0000000000 --- a/target/linux/layerscape/patches-5.10/701-staging-add-fsl_ppfe-driver.patch +++ /dev/null @@ -1,12036 +0,0 @@ -From ab06204b9ae48324ed5b7e7026cce47ecd0a376d Mon Sep 17 00:00:00 2001 -From: Martin Schiller <ms@dev.tdt.de> -Date: Mon, 8 Nov 2021 14:56:10 +0100 -Subject: [PATCH] staging: add fsl_ppfe driver -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This patch is the squashed version of all ppfe related commits from -LSDK-21.08. - -See the following git log for further details: - -commit bc389fa57819620b61f86a39444cf22c70e291ad -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Sat Sep 16 07:05:49 2017 +0530 - - net: fsl_ppfe: dts binding for ppfe - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit d3822b65f897e4c421c72bd215f34e41d8c4a40e -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Sat Sep 16 14:21:37 2017 +0530 - - staging: fsl_ppfe/eth: header files for pfe driver - - This patch has all pfe header files. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit 9184a85f93816a8b81cb363464925757185b7138 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Sat Sep 16 14:22:17 2017 +0530 - - staging: fsl_ppfe/eth: introduce pfe driver - - This patch introduces Linux support for NXP's LS1012A Packet - Forwarding Engine (pfe_eth). LS1012A uses hardware packet forwarding - engine to provide high performance Ethernet interfaces. The device - includes two Ethernet ports. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit 63f6117f1c9af34bc333425507a8b858fcd61951 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Oct 11 19:23:38 2017 +0530 - - staging: fsl_ppfe/eth: fix RGMII tx delay issue - - Recently logic to enable RGMII tx delay was changed by - below patch. - - https://patchwork.kernel.org/patch/9447581/ - - Based on the patch, appropriate change is made in PFE driver. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit adf71df9d53026513da71892a27c455ae23a6d06 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Oct 18 14:29:30 2017 +0530 - - staging: fsl_ppfe/eth: remove unused functions - - Remove unused functions hif_xmit_pkt & hif_lib_xmit_pkt. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit ea632882dacf4ec21f84fa73ebff7d89d46fbeb3 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Oct 18 18:34:41 2017 +0530 - - staging: fsl_ppfe/eth: fix read/write/ack idx issue - - While fixing checkpatch errors some of the index increments - were commented out. They are enabled. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 75dc5856eafe3ec988aa52f498ad683332e5a528 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Fri Oct 27 11:20:47 2017 +0530 - - staging: fsl_ppfe/eth: Make phy_ethtool_ksettings_get return void - - Make return value void since function never return meaningful value - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit fd60dff2329a4c20f5638147db315879d4b92097 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Nov 15 13:45:27 2017 +0530 - - staging: fsl_ppfe/eth: add function to update tmu credits - - __hif_lib_update_credit function is used to update the tmu credits. - If tx_qos is set, tmu credit is updated based on the number of packets - transmitted by tmu. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit 259418d3755afeabca062df4c177cb6617be7e2b -Author: Kavi Akhila-B46177 <akhila.kavi@nxp.com> -Date: Thu Nov 2 12:05:35 2017 +0530 - - staging: fsl_ppfe/eth: Avoid packet drop at TMU queues - - Added flow control between TMU queues and PFE Linux driver, - based on TMU credits availability. - Added tx_qos module parameter to control this behavior. - Use queue-0 as default queue to transmit packets. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - Signed-off-by: Akhila Kavi <akhila.kavi@nxp.com> - Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit 48f8aa50bdcccdec699550d10e274711f9f8cb4d -Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> -Date: Wed Nov 29 12:08:00 2017 +0530 - - staging: fsl_ppfe/eth: Enable PFE in clause 45 mode - - when we opearate in clause 45 mode, we need to call - the function get_phy_device() with its 3rd argument as - "true" and then the resultant phy device needs to be - register with phy layer via phy_device_register() - - Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> - -commit 217cf01a1eb7c0a1f44c250ab05bb832287069ca -Author: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> -Date: Wed Nov 29 12:21:43 2017 +0530 - - staging: fsl_ppfe/eth: Disable autonegotiation for 2.5G SGMII - - PCS initialization sequence for 2.5G SGMII interface governs - auto negotiation to be in disabled mode - - Signed-off-by: Bhaskar Upadhaya <Bhaskar.Upadhaya@nxp.com> - -commit 0758955e5d8be44260c3b6877ff78e18c2dc2706 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Thu Mar 8 13:58:38 2018 +0530 - - staging: fsl_ppfe/eth: calculate PFE_PKT_SIZE with SKB_DATA_ALIGN - - pfe packet size was calculated without considering skb data alignment - and this resulted in jumbo frames crashing kernel when the - cacheline size increased from 64 to 128 bytes with - commit 97303480753e ("arm64: Increase the max granular size"). - - Modify pfe packet size caclulation to include skb data alignment of - sizeof(struct skb_shared_info). - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit d336c470781a28fe44a494b4f537a4dbac9fd1dd -Author: Akhil Goyal <akhil.goyal@nxp.com> -Date: Fri Apr 13 15:41:28 2018 +0530 - - staging: fsl_ppfe/eth: support for userspace networking - - This patch adds the userspace mode support to fsl_ppfe network driver. - In the new mode, basic hardware initialization is performed in kernel, while - the datapath and HIF handling is the responsibility of the userspace. - - The new command line parameter is added to initialize the ppfe module - in userspace mode. By default the module remains in kernelspace networking - mode. - To enable userspace mode, use "insmod pfe.ko us=1" - - Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com> - Signed-off-by: Gagandeep Singh <g.singh@nxp.com> - -commit 30f97a6ae76cf7a284fee4b8ad30bce24568ac53 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Mon Apr 30 11:40:01 2018 +0530 - - staging: fsl_ppfe/eth: unregister netdev after pfe_phy_exit - - rmmod pfe.ko throws below warning: - - kernfs: can not remove 'phydev', no directory - ------------[ cut here ]------------ - WARNING: CPU: 0 PID: 2230 at fs/kernfs/dir.c:1481 - kernfs_remove_by_name_ns+0x90/0xa0 - - This is caused when the unregistered netdev structure is accessed to - disconnect phy. - - Resolve the issue by unregistering netdev after disconnecting phy. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 1b7daa665cd53fe51f19689c5b209fd89551f131 -Author: anuj batham <anuj.batham@nxp.com> -Date: Fri Apr 27 14:38:09 2018 +0530 - - staging: fsl_ppfe/eth: HW parse results for DPDK - - HW Parse results are included in the packet headroom. - Length and Offset calculation now accommodates parse info size. - - Signed-off-by: Archana Madhavan <archana.madhavan@nxp.com> - -commit 0aeb9981d44aad6a45eb8f3ead37f91258be173f -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Jun 20 10:22:32 2018 +0530 - - staging: fsl_ppfe/eth: reorganize pfe_netdev_ops - - Reorganize members of struct pfe_netdev_ops to match with the order - of members in struct net_device_ops defined in include/linux/netdevice.h - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 1cbccc5028c337e7c88bf61cf89038cfad449d34 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Jun 20 10:22:50 2018 +0530 - - staging: fsl_ppfe/eth: use mask for rx max frame len - - Define and use PFE_RCR_MAX_FL_MASK to properly set Rx max frame - length of MAC Receive Control Register. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit d8c8ed721470bd47ad5414d8fdc5d093cdd247f7 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Jun 20 10:23:01 2018 +0530 - - staging: fsl_ppfe/eth: define pfe ndo_change_mtu function - - Define ndo_change_mtu function for pfe. This sets the max Rx frame - length to the new mtu. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit f5f50edda84cf9305db06310536525c206970d6c -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Jun 20 10:23:16 2018 +0530 - - staging: fsl_ppfe/eth: remove jumbo frame enable from gemac init - - MAC Receive Control Register was configured to allow jumbo frames. - This is removed as jumbo frames can be supported anytime by changing - mtu which will in turn modify MAX_FL field of MAC RCR. - Jumbo frames caused pfe to hang on LS1012A rev 1.0 Silicon due to - erratum A-010897. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 53e3c57af87d72ee0299a723499bd911cb1ed25a -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Jun 20 10:23:32 2018 +0530 - - staging: fsl_ppfe/eth: disable CRC removal - - Disable CRC removal from the packet, so that packets are forwarded - as is to Linux. - CRC configuration in MAC will be reflected in the packet received - to Linux. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit eb55f7878a6ece7edbecd648e147a5683da18c76 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Jun 20 10:23:41 2018 +0530 - - staging: fsl_ppfe/eth: handle ls1012a errata_a010897 - - On LS1012A rev 1.0, Jumbo frames are not supported as it causes - the PFE controller to hang. A reset of the entire chip is required - to resume normal operation. - - To handle this errata, frames with length > 1900 are truncated for - rev 1.0 of LS1012A. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit c7b4f5f8f74925ce1d209ee4fcd5973d5cc5b61c -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Thu Oct 4 09:38:34 2018 +0530 - - staging: fsl_ppfe/eth: replace magic numbers - - Replace magic numbers and some cosmetic changes. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit c0ed379aa248dd70b2acf5dd8908bec1f6de5487 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Thu Oct 4 09:39:00 2018 +0530 - - staging: fsl_ppfe/eth: resolve indentation warning - - Resolve the following indentation warning: - - drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c: - In function ‘pfe_get_gemac_if_proprties’: - drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:96:2: - warning: this ‘else’ clause does not guard... - [-Wmisleading-indentation] - else - ^~~~ - drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c:98:3: - note: ...this statement, but the latter is misleadingly indented as - if it were guarded by the ‘else’ - pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id; - ^~~~~ - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit c509cb585af2848dbb4ab194bf0fa435e356cb0a -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Thu Oct 4 09:38:17 2018 +0530 - - staging: fsl_ppfe/eth: add fixed-link support - - In cases where MAC is not connected to a normal MDIO-managed PHY - device, and instead to a switch, it is configured as a "fixed-link". - Code to handle this scenario is added here. - - phy_node in the dtb is checked to identify a fixed-link. - On identification of a fixed-link, it is registered and connected. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 5e93b6ed52d4cdce12a481866c6f211299940734 -Author: Shreyansh Jain <shreyansh.jain@nxp.com> -Date: Wed Jun 6 14:19:34 2018 +0530 - - staging: fsl_ppfe: add support for a char dev for link status - - Read and IOCTL support is added. Application would need to open, - read/ioctl the /dev/pfe_us_cdev device. - select is pending as it requires a wait_queue. - - Signed-off-by: Shreyansh Jain <shreyansh.jain@nxp.com> - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 48e064df94157b0c34f2d75e164ea5c7f4970b7b -Author: Akhil Goyal <akhil.goyal@nxp.com> -Date: Thu Jul 5 20:14:21 2018 +0530 - - staging: fsl_ppfe: enable hif event from userspace - - HIF interrupts are enabled using ioctl from user space, - and epoll wait from user space wakes up when there is an HIF - interrupt. - - Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com> - -commit d16d91d3250abec31422b28ff04a973b8b3d73c5 -Author: Akhil Goyal <akhil.goyal@nxp.com> -Date: Fri Jul 20 16:43:25 2018 +0530 - - staging: fsl_ppfe: performance tuning for user space - - interrupt coalescing of 100 usec is added. - - Signed-off-by: Akhil Goyal <akhil.goyal@nxp.com> - Signed-off-by: Sachin Saxena <sachin.saxena@nxp.com> - -commit eadb4c9d3e37c44659284fc9190d7e4f04b12aa0 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Tue Nov 20 21:50:23 2018 +0530 - - staging: fsl_ppfe/eth: Update to use SPDX identifiers - - Replace license text with corresponding SPDX identifiers and update the - format of existing SPDX identifiers to follow the new guideline - Documentation/process/license-rules.rst. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit a468be7bda6fd98afab1cccb4e7151f23ca096e9 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Tue Nov 20 21:50:40 2018 +0530 - - staging: fsl_ppfe/eth: misc clean up - - - remove redundant hwfeature init - - remove unused vars from ls1012a_eth_platform_data - - To handle ls1012a errata_a010897, PPFE driver requires GUTS driver - to be compiled in. Select FSL_GUTS when PPFE driver is compiled. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 0e37bfbeda9510688ad987251aa07e3c88d6ba41 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Tue Nov 20 21:50:51 2018 +0530 - - staging: fsl_ppfe/eth: reorganize platform phy parameters - - - Use "phy-handle" and of_* functions to get phy node and fixed-link - parameters - - - Reorganize phy parameters and initialize them only if phy-handle - or fixed-link is defined in the dtb. - - - correct typo pfe_get_gemac_if_proprties to pfe_get_gemac_if_properties - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit c8703ab06e644e853b12baf082dd703f6a4440a5 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Fri Nov 23 23:58:28 2018 +0530 - - staging: fsl_ppfe/eth: support single interface initialization - - - arrange members of struct mii_bus in sequence matching phy.h - - if mdio node is defined, use of_mdiobus_register to register - child nodes (phy devices) available on the mdio bus. - - remove of_phy_register_fixed_link from pfe_phy_init as it is being - handled in pfe_get_gemac_if_properties - - remove mdio enabled check - - skip phy init, if no PHY or fixed-link - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 89804e2d74002d01ea3f174048176e498298329a -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Tue Nov 20 21:51:53 2018 +0530 - - net: fsl_ppfe: update dts properties for phy - - Use commonly used phy-handle property and mdio subnode to handle - phy properties. - - Deprecate bindings fsl,gemac-phy-id & fsl,pfe-phy-if-flags. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 5b0cc262ba7791fb0fae1f81f9619f54a15a75ba -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Fri Dec 7 19:30:03 2018 +0530 - - staging: fsl_ppfe/eth: remove unused code - - - remove gemac-bus-id related code that is unused. - - remove unused prototype gemac_set_mdc_div. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit a5a237f331ab7fcd85b95466f481ddb7023aecc3 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Mon Dec 10 10:22:33 2018 +0530 - - staging: fsl_ppfe/eth: separate mdio init from mac init - - - separate mdio initialization from mac initialization - - Define pfe_mdio_priv_s structure to hold mii_bus structure and other - related data. - - Modify functions to work with the separted mdio init model. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 262a03c082de5a93efd7f54bec48b39cda9042a8 -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Mar 27 13:25:57 2019 +0530 - - staging: fsl_ppfe/eth: adapt to link mode based phydev changes - - Setting link mode bits have changed with the integration of - commit (3c1bcc8 net: ethernet: Convert phydev advertize and - supported from u32 to link mode). Adapt to the new method of - setting and clearing the link mode bits. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 75f911d8ae45215f1c188191da92905ad3f7ad4a -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Mar 27 19:31:35 2019 +0530 - - staging: fsl_ppfe/eth: use generic soc_device infra instead of fsl_guts_get_svr() - - Commit ("soc: fsl: guts: make fsl_guts_get_svr() static") has - made fsl_guts_get_svr() static and hence use generic soc_device - infrastructure to check SoC revision. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit 0a0ca3d898d15b3d7a206597a68f28134d4dfebd -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Tue Mar 26 16:52:22 2019 +0530 - - staging: fsl_ppfe/eth: use memremap() to map RAM area used by PFE - - RAM area used by PFE should be mapped using memremap() instead of - directly traslating physical addr to virtual. This will ensure proper - checks are done before the area is used. - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - -commit bfc0c2fedb76ad9c888db421b435d51e33fe276a -Author: Li Yang <leoyang.li@nxp.com> -Date: Tue Jun 11 18:24:37 2019 -0500 - - staging: fsl_ppfe/eth: remove 'fallback' argument from dev->ndo_select_queue() - - To be consistent with upstream API change. - - Signed-off-by: Li Yang <leoyang.li@nxp.com> - -commit cfd0841983961067efe69379371ddcb49b230dac -Author: Ting Liu <ting.liu@nxp.com> -Date: Mon Jun 17 09:27:53 2019 +0200 - - staging: fsl_ppfe/eth: prefix header search paths with $(srctree)/ - - Currently, the rules for configuring search paths in Kbuild have - changed: https://lkml.org/lkml/2019/5/13/37 - - This will lead the below error: - - fatal error: pfe/pfe.h: No such file or directory - - Fix it by adding $(srctree)/ prefix to the search paths. - - Signed-off-by: Ting Liu <ting.liu@nxp.com> - -commit 4be722099e4b6bdff2e683234ffaa2dc62fc773d -Author: Calvin Johnson <calvin.johnson@nxp.com> -Date: Wed Nov 1 11:11:30 2017 +0530 - - staging: fsl_ppfe/eth: add pfe support to Kconfig and Makefile - - Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> - [ Aisheng: fix minor conflict due to removed VBOXSF_FS ] - Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> - -commit 5a2c9482ec3959dc2010f99897359b9e4006d2a4 -Author: Nagesh Koneti <koneti.nagesh@nxp.com> -Date: Wed Sep 25 12:01:19 2019 +0530 - - staging: fsl_ppfe/eth: Disable termination of CRC fwd. - - LS1012A MAC PCS block has an erratum that is seen with specific PHY AR803x. - The issue is triggered by the (spec-compliant) operation of the AR803x PHY - on the LS1012A-FRWY board.Due to this, good FCS packet is reported as error - packet by MAC, so for these error packets FCS should be validated and - discard only real error packets in PFE Rx packet path. - - Signed-off-by: Nagesh Koneti <koneti.nagesh@nxp.com> - Signed-off-by: Nagesh Koneti <“koneti.nagesh@nxp.com”> - -commit 36344cfc28f4cbdf606330ab8929e10d0778a087 -Author: Li Yang <leoyang.li@nxp.com> -Date: Sun Dec 8 18:19:18 2019 -0600 - - net: ppfe: Cope with of_get_phy_mode() API change - - Signed-off-by: Li Yang <leoyang.li@nxp.com> - -commit ee2a796cf8990ac06f329c580f18fffefbac6a9a -Author: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> -Date: Wed Jan 8 19:06:12 2020 +0530 - - staging: fsl_ppfe/eth: Enhance error checking in platform probe - - Fix the kernel crash when MAC addr is not passed in dtb. - - Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit 2e8ca14ea6cc8d6816f2a445f3610f6b5b852e7c -Author: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> -Date: Mon Apr 6 19:46:05 2020 +0530 - - staging: fsl_ppfe/eth: reject unsupported coalescing params - - Set ethtool_ops->supported_coalesce_params to let - the core reject unsupported coalescing parameters. - - Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit 7ce4dd75c94d8a7dbe4e4ad747b4ddc5be6d83b4 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Sat Mar 28 00:30:53 2020 +0530 - - staging: fsl_ppfe/eth:check "reg" property before pfe_get_gemac_if_properties() - - It has been observed that the function pfe_get_gemac_if_properties() is - been called blindly for the next two child nodes. There might be some - cases where it may go wrong and that lead to missing interfaces. - with these changes it is ensured thats not the case. - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - Signed-off-by: Anji J <anji.jagarlmudi@nxp.com> - -commit 7ba7cfb799c8928f4963f86a1ad47e2dd56022b2 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Sat Mar 28 00:34:13 2020 +0530 - - staging: fsl_ppfe/eth: "struct firmware" dereference is reduced in many functions - - firmware structure's data variable is the actual elf data. It has been - dereferenced in multiple functions and this has been reduced. - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - Signed-off-by: Anji J <anji.jagarlmudi@nxp.com> - -commit 443538bb09b979fcc98a58e18a3eb8cebe25ad4f -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Sun Mar 29 18:05:50 2020 +0530 - - staging: fsl_ppfe/eth: LF-27 load pfe binaries from FDT - - FDT prepared in uboot now has pfe firmware part of it. - These changes will read the firmware by default from it and tries to load - the elf into the PFE PEs. This help build the pfe driver pasrt of kernel. - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - Signed-off-by: Anji J <anji.jagarlmudi@nxp.com> - -commit 2b1f551c2aee4550ffca5f86031bc4f5e6ccb848 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Tue Jun 9 15:33:42 2020 +0530 - - staging: fsl_ppfe/eth: proper handling for RGMII delay mode - - The correct setting for the RGMII ports on LS1012ARDB is to - enable delay on both Tx and Rx. So the phy mode to be matched - is PHY_INTERFACE_MODE_RGMII_ID. - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - Signed-off-by: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> - -commit a95d84b87e743bd7c57b287901524f2cffbf38d7 -Author: Dong Aisheng <aisheng.dong@nxp.com> -Date: Wed Jul 15 16:06:24 2020 +0800 - - LF-1762-2 staging: fsl_ppfe: replace '---help---' in Kconfig files with 'help' - - Update Kconfig to cope with upstream change - commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over - '---help---'"). - - Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com> - -commit 546ef027c2b0768517d903429d56bcd89b919e6d -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Jul 15 10:36:07 2020 +0530 - - staging: fsl_ppfe/eth: Nesting level does not match indentation - - corrected nesting level - LF-1661 and Coverity CID: 8879316 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit c76a95f776e0f3e1a2c8abc1748c662151e29be5 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Jul 15 11:19:57 2020 +0530 - - staging: fsl_ppfe/eth: Initialized scalar variable - - Proper initialization of scalar variable - LF-1657 and Coverity CID: 3335133 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit f48286af915f664c15aa327aaf6d9b61d33eea67 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Jul 15 11:47:50 2020 +0530 - - staging: fsl_ppfe/eth: misspelt variable name - - variable name corrected - LF-1656 and Coverity CID: 3335119 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit a5e006f71fce8e76831704b31218f3d57c0b9924 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Jul 15 12:10:47 2020 +0530 - - staging: fsl_ppfe/eth: Avoiding out-of-bound writes - - avoid out-of-bound writes with proper error handling - LF-1654, LF-1652 and Coverity CID: 3335106, 3335090 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit 957fde83420b6a74a5e96b2f27183274b04211d9 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Jul 15 13:09:35 2020 +0530 - - staging: fsl_ppfe/eth: Initializing scalar variable - - proper initialization of scalar variable. - LF-1653 and Coverity CID: 3335101 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit fae95666a4c992b7f9035ee978e3e289495cbd47 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Jul 15 13:45:50 2020 +0530 - - staging: fsl_ppfe/eth: checking return value - - proper checks added and handled for return value. - LF-1644 and Coverity CID: 241888 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit 5bf7baddb22ecafd6064c9062a804bcd17a326cc -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Jul 15 14:04:10 2020 +0530 - - staging: fsl_ppfe/eth: Avoid out-of-bound access - - proper handling to avoid out-of-bound access - LF-1642, LF-1641 and Coverity CID: 240910, 240891 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit b15d480d66277fc00bc610a91af56263733a4e13 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Fri Jul 31 10:19:00 2020 +0530 - - staging: fsl_ppfe/eth: Avoiding out-of-bound writes - - avoid out-of-bound writes with proper error handling - LF-1654, LF-1652 and Coverity CID: 3335106, 3335090 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit 188992fc4d4173c6bb36e924b5833bb092f7d602 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Fri Jul 31 10:23:59 2020 +0530 - - staging: fsl_ppfe/eth: return value init in error case - - proper err return in error case. - LF-1806 and Coverity CID: 10468592 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit 26d6dd0bd1331dd07764914033fd8e98777fc165 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Thu Aug 13 12:04:48 2020 +0530 - - staging: fsl_ppfe/eth: Avoid recursion in header inclusion - - Avoiding header inclusions that are not necessary and also that are - causing header inclusion recursion. - - LF-2102 and Coverity CID: 240838 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit f18618582d078b87c9ee2e93ebbffee44cd76ec0 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Thu Aug 13 12:28:25 2020 +0530 - - staging: fsl_ppfe/eth: Avoiding return value overwrite - - avoid return value overwrite at the end of function. - LF-2136, LF-2137 and Coverity CID: 8879341, 8879364 - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit 4cd4e5f325516d91c630311af4d36472ce19124e -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Sep 9 17:50:10 2020 +0530 - - staging: fsl_ppfe/eth: LF-27 enabling PFE firmware load from FDT - - The macro, "LOAD_PFEFIRMWARE_FROM_FILESYSTEM" is been disabled to load - the firmware from FDT by default. Enabling the macro will load the - firmware from filesystem. - - Also, the Makefile is now tuned to build pfe as per the config option - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit 175a310323ccfab0025f2da56799bb3939b65c9d -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Thu Apr 9 18:17:48 2020 +0530 - - staging: fsl_ppfe/eth: Ethtool stats correction for IEEE_rx_drop counter - - Due to carrier extended bug the phy counter IEEE_rx_drop counter is - incremented some times and phy reports the packet has crc error. - Because of this PFE revalidates all the packets that are marked crc - error by phy. Now, the counter phy reports is till bogus and this - patch decrements the counter by pfe revalidated (and are crc ok) - counter amount. - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> - -commit a4683911f7a7d71762a90dabf72faadab5766774 -Author: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> -Date: Wed Sep 30 17:20:19 2020 +0530 - - staging: fsl_ppfe/eth: PFE firmware load enhancements - - PFE driver enhancements to load the PE firmware from filesystem - when the firmware is not found in FDT. - - Signed-off-by: Chaitanya Sakinam <chaitanya.sakinam@nxp.com> ---- - .../devicetree/bindings/net/fsl_ppfe/pfe.txt | 199 ++ - MAINTAINERS | 8 + - drivers/staging/Kconfig | 2 + - drivers/staging/Makefile | 1 + - drivers/staging/fsl_ppfe/Kconfig | 21 + - drivers/staging/fsl_ppfe/Makefile | 20 + - drivers/staging/fsl_ppfe/TODO | 2 + - drivers/staging/fsl_ppfe/include/pfe/cbus.h | 78 + - .../staging/fsl_ppfe/include/pfe/cbus/bmu.h | 55 + - .../fsl_ppfe/include/pfe/cbus/class_csr.h | 289 ++ - .../fsl_ppfe/include/pfe/cbus/emac_mtip.h | 242 ++ - .../staging/fsl_ppfe/include/pfe/cbus/gpi.h | 86 + - .../staging/fsl_ppfe/include/pfe/cbus/hif.h | 100 + - .../fsl_ppfe/include/pfe/cbus/hif_nocpy.h | 50 + - .../fsl_ppfe/include/pfe/cbus/tmu_csr.h | 168 ++ - .../fsl_ppfe/include/pfe/cbus/util_csr.h | 61 + - drivers/staging/fsl_ppfe/include/pfe/pfe.h | 372 +++ - drivers/staging/fsl_ppfe/pfe_cdev.c | 258 ++ - drivers/staging/fsl_ppfe/pfe_cdev.h | 41 + - drivers/staging/fsl_ppfe/pfe_ctrl.c | 226 ++ - drivers/staging/fsl_ppfe/pfe_ctrl.h | 100 + - drivers/staging/fsl_ppfe/pfe_debugfs.c | 99 + - drivers/staging/fsl_ppfe/pfe_debugfs.h | 13 + - drivers/staging/fsl_ppfe/pfe_eth.c | 2587 +++++++++++++++++ - drivers/staging/fsl_ppfe/pfe_eth.h | 175 ++ - drivers/staging/fsl_ppfe/pfe_firmware.c | 398 +++ - drivers/staging/fsl_ppfe/pfe_firmware.h | 21 + - drivers/staging/fsl_ppfe/pfe_hal.c | 1517 ++++++++++ - drivers/staging/fsl_ppfe/pfe_hif.c | 1064 +++++++ - drivers/staging/fsl_ppfe/pfe_hif.h | 199 ++ - drivers/staging/fsl_ppfe/pfe_hif_lib.c | 628 ++++ - drivers/staging/fsl_ppfe/pfe_hif_lib.h | 229 ++ - drivers/staging/fsl_ppfe/pfe_hw.c | 164 ++ - drivers/staging/fsl_ppfe/pfe_hw.h | 15 + - .../staging/fsl_ppfe/pfe_ls1012a_platform.c | 383 +++ - drivers/staging/fsl_ppfe/pfe_mod.c | 158 + - drivers/staging/fsl_ppfe/pfe_mod.h | 103 + - drivers/staging/fsl_ppfe/pfe_perfmon.h | 26 + - drivers/staging/fsl_ppfe/pfe_sysfs.c | 840 ++++++ - drivers/staging/fsl_ppfe/pfe_sysfs.h | 17 + - 40 files changed, 11015 insertions(+) - create mode 100644 Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt - create mode 100644 drivers/staging/fsl_ppfe/Kconfig - create mode 100644 drivers/staging/fsl_ppfe/Makefile - create mode 100644 drivers/staging/fsl_ppfe/TODO - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h - create mode 100644 drivers/staging/fsl_ppfe/include/pfe/pfe.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_cdev.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_ctrl.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_debugfs.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_eth.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_firmware.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_hal.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_hif.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_hif_lib.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_hw.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_mod.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_perfmon.h - create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.c - create mode 100644 drivers/staging/fsl_ppfe/pfe_sysfs.h - ---- /dev/null -+++ b/Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt -@@ -0,0 +1,199 @@ -+============================================================================= -+NXP Programmable Packet Forwarding Engine Device Bindings -+ -+CONTENTS -+ - PFE Node -+ - Ethernet Node -+ -+============================================================================= -+PFE Node -+ -+DESCRIPTION -+ -+PFE Node has all the properties associated with Packet Forwarding Engine block. -+ -+PROPERTIES -+ -+- compatible -+ Usage: required -+ Value type: <stringlist> -+ Definition: Must include "fsl,pfe" -+ -+- reg -+ Usage: required -+ Value type: <prop-encoded-array> -+ Definition: A standard property. -+ Specifies the offset of the following registers: -+ - PFE configuration registers -+ - DDR memory used by PFE -+ -+- fsl,pfe-num-interfaces -+ Usage: required -+ Value type: <u32> -+ Definition: Must be present. Value can be either one or two. -+ -+- interrupts -+ Usage: required -+ Value type: <prop-encoded-array> -+ Definition: Three interrupts are specified in this property. -+ - HIF interrupt -+ - HIF NO COPY interrupt -+ - Wake On LAN interrupt -+ -+- interrupt-names -+ Usage: required -+ Value type: <stringlist> -+ Definition: Following strings are defined for the 3 interrupts. -+ "pfe_hif" - HIF interrupt -+ "pfe_hif_nocpy" - HIF NO COPY interrupt -+ "pfe_wol" - Wake On LAN interrupt -+ -+- memory-region -+ Usage: required -+ Value type: <phandle> -+ Definition: phandle to a node describing reserved memory used by pfe. -+ Refer:- Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt -+ -+- fsl,pfe-scfg -+ Usage: required -+ Value type: <phandle> -+ Definition: phandle for scfg. -+ -+- fsl,rcpm-wakeup -+ Usage: required -+ Value type: <phandle> -+ Definition: phandle for rcpm. -+ -+- clocks -+ Usage: required -+ Value type: <phandle> -+ Definition: phandle for clockgen. -+ -+- clock-names -+ Usage: required -+ Value type: <string> -+ Definition: phandle for clock name. -+ -+EXAMPLE -+ -+pfe: pfe@04000000 { -+ compatible = "fsl,pfe"; -+ reg = <0x0 0x04000000 0x0 0xc00000>, /* AXI 16M */ -+ <0x0 0x83400000 0x0 0xc00000>; /* PFE DDR 12M */ -+ reg-names = "pfe", "pfe-ddr"; -+ fsl,pfe-num-interfaces = <0x2>; -+ interrupts = <0 172 0x4>, /* HIF interrupt */ -+ <0 173 0x4>, /*HIF_NOCPY interrupt */ -+ <0 174 0x4>; /* WoL interrupt */ -+ interrupt-names = "pfe_hif", "pfe_hif_nocpy", "pfe_wol"; -+ memory-region = <&pfe_reserved>; -+ fsl,pfe-scfg = <&scfg 0>; -+ fsl,rcpm-wakeup = <&rcpm 0xf0000020>; -+ clocks = <&clockgen 4 0>; -+ clock-names = "pfe"; -+ -+ status = "okay"; -+ pfe_mac0: ethernet@0 { -+ }; -+ -+ pfe_mac1: ethernet@1 { -+ }; -+}; -+ -+============================================================================= -+Ethernet Node -+ -+DESCRIPTION -+ -+Ethernet Node has all the properties associated with PFE used by platforms to -+connect to PHY: -+ -+PROPERTIES -+ -+- compatible -+ Usage: required -+ Value type: <stringlist> -+ Definition: Must include "fsl,pfe-gemac-port" -+ -+- reg -+ Usage: required -+ Value type: <prop-encoded-array> -+ Definition: A standard property. -+ Specifies the gemacid of the interface. -+ -+- fsl,gemac-bus-id -+ Usage: required -+ Value type: <u32> -+ Definition: Must be present. Value should be the id of the bus -+ connected to gemac. -+ -+- fsl,gemac-phy-id (deprecated binding) -+ Usage: required -+ Value type: <u32> -+ Definition: This binding shouldn't be used with new platforms. -+ Must be present. Value should be the id of the phy -+ connected to gemac. -+ -+- fsl,mdio-mux-val -+ Usage: required -+ Value type: <u32> -+ Definition: Must be present. Value can be either 0 or 2 or 3. -+ This value is used to configure the mux to enable mdio. -+ -+- phy-mode -+ Usage: required -+ Value type: <string> -+ Definition: Must include "sgmii" -+ -+- fsl,pfe-phy-if-flags (deprecated binding) -+ Usage: required -+ Value type: <u32> -+ Definition: This binding shouldn't be used with new platforms. -+ Must be present. Value should be 0 by default. -+ If there is not phy connected, this need to be 1. -+ -+- phy-handle -+ Usage: optional -+ Value type: <phandle> -+ Definition: phandle to the PHY device connected to this device. -+ -+- mdio : A required subnode which specifies the mdio bus in the PFE and used as -+a container for phy nodes according to ../phy.txt. -+ -+EXAMPLE -+ -+ethernet@0 { -+ compatible = "fsl,pfe-gemac-port"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x0>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x0>; /* BUS_ID */ -+ fsl,mdio-mux-val = <0x0>; -+ phy-mode = "sgmii"; -+ phy-handle = <&sgmii_phy1>; -+}; -+ -+ -+ethernet@1 { -+ compatible = "fsl,pfe-gemac-port"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ reg = <0x1>; /* GEM_ID */ -+ fsl,gemac-bus-id = <0x1>; /* BUS_ID */ -+ fsl,mdio-mux-val = <0x0>; -+ phy-mode = "sgmii"; -+ phy-handle = <&sgmii_phy2>; -+}; -+ -+mdio@0 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ sgmii_phy1: ethernet-phy@2 { -+ reg = <0x2>; -+ }; -+ -+ sgmii_phy2: ethernet-phy@1 { -+ reg = <0x1>; -+ }; -+}; ---- a/MAINTAINERS -+++ b/MAINTAINERS -@@ -7068,6 +7068,14 @@ F: drivers/ptp/ptp_qoriq.c - F: drivers/ptp/ptp_qoriq_debugfs.c - F: include/linux/fsl/ptp_qoriq.h - -+FREESCALE QORIQ PPFE ETHERNET DRIVER -+M: Anji Jagarlmudi <anji.jagarlmudi@nxp.com> -+M: Calvin Johnson <calvin.johnson@nxp.com> -+L: netdev@vger.kernel.org -+S: Maintained -+F: drivers/staging/fsl_ppfe -+F: Documentation/devicetree/bindings/net/fsl_ppfe/pfe.txt -+ - FREESCALE QUAD SPI DRIVER - M: Han Xu <han.xu@nxp.com> - L: linux-spi@vger.kernel.org ---- a/drivers/staging/Kconfig -+++ b/drivers/staging/Kconfig -@@ -118,4 +118,6 @@ source "drivers/staging/wfx/Kconfig" - - source "drivers/staging/hikey9xx/Kconfig" - -+source "drivers/staging/fsl_ppfe/Kconfig" -+ - endif # STAGING ---- a/drivers/staging/Makefile -+++ b/drivers/staging/Makefile -@@ -49,3 +49,4 @@ obj-$(CONFIG_KPC2000) += kpc2000/ - obj-$(CONFIG_QLGE) += qlge/ - obj-$(CONFIG_WFX) += wfx/ - obj-y += hikey9xx/ -+obj-$(CONFIG_FSL_PPFE) += fsl_ppfe/ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/Kconfig -@@ -0,0 +1,21 @@ -+# -+# Freescale Programmable Packet Forwarding Engine driver -+# -+config FSL_PPFE -+ tristate "Freescale PPFE Driver" -+ select FSL_GUTS -+ default n -+ help -+ Freescale LS1012A SoC has a Programmable Packet Forwarding Engine. -+ It provides two high performance ethernet interfaces. -+ This driver initializes, programs and controls the PPFE. -+ Use this driver to enable network connectivity on LS1012A platforms. -+ -+if FSL_PPFE -+ -+config FSL_PPFE_UTIL_DISABLED -+ bool "Disable PPFE UTIL Processor Engine" -+ help -+ UTIL PE has to be enabled only if required. -+ -+endif # FSL_PPFE ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/Makefile -@@ -0,0 +1,20 @@ -+# -+# Makefile for Freesecale PPFE driver -+# -+ -+ccflags-y += -I $(srctree)/$(src)/include -I $(srctree)/$(src) -+ -+obj-$(CONFIG_FSL_PPFE) += pfe.o -+ -+pfe-y += pfe_mod.o \ -+ pfe_hw.o \ -+ pfe_firmware.o \ -+ pfe_ctrl.o \ -+ pfe_hif.o \ -+ pfe_hif_lib.o\ -+ pfe_eth.o \ -+ pfe_sysfs.o \ -+ pfe_debugfs.o \ -+ pfe_ls1012a_platform.o \ -+ pfe_hal.o \ -+ pfe_cdev.o ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/TODO -@@ -0,0 +1,2 @@ -+TODO: -+ - provide pfe pe monitoring support ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus.h -@@ -0,0 +1,78 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _CBUS_H_ -+#define _CBUS_H_ -+ -+#define EMAC1_BASE_ADDR (CBUS_BASE_ADDR + 0x200000) -+#define EGPI1_BASE_ADDR (CBUS_BASE_ADDR + 0x210000) -+#define EMAC2_BASE_ADDR (CBUS_BASE_ADDR + 0x220000) -+#define EGPI2_BASE_ADDR (CBUS_BASE_ADDR + 0x230000) -+#define BMU1_BASE_ADDR (CBUS_BASE_ADDR + 0x240000) -+#define BMU2_BASE_ADDR (CBUS_BASE_ADDR + 0x250000) -+#define ARB_BASE_ADDR (CBUS_BASE_ADDR + 0x260000) -+#define DDR_CONFIG_BASE_ADDR (CBUS_BASE_ADDR + 0x270000) -+#define HIF_BASE_ADDR (CBUS_BASE_ADDR + 0x280000) -+#define HGPI_BASE_ADDR (CBUS_BASE_ADDR + 0x290000) -+#define LMEM_BASE_ADDR (CBUS_BASE_ADDR + 0x300000) -+#define LMEM_SIZE 0x10000 -+#define LMEM_END (LMEM_BASE_ADDR + LMEM_SIZE) -+#define TMU_CSR_BASE_ADDR (CBUS_BASE_ADDR + 0x310000) -+#define CLASS_CSR_BASE_ADDR (CBUS_BASE_ADDR + 0x320000) -+#define HIF_NOCPY_BASE_ADDR (CBUS_BASE_ADDR + 0x350000) -+#define UTIL_CSR_BASE_ADDR (CBUS_BASE_ADDR + 0x360000) -+#define CBUS_GPT_BASE_ADDR (CBUS_BASE_ADDR + 0x370000) -+ -+/* -+ * defgroup XXX_MEM_ACCESS_ADDR PE memory access through CSR -+ * XXX_MEM_ACCESS_ADDR register bit definitions. -+ */ -+#define PE_MEM_ACCESS_WRITE BIT(31) /* Internal Memory Write. */ -+#define PE_MEM_ACCESS_IMEM BIT(15) -+#define PE_MEM_ACCESS_DMEM BIT(16) -+ -+/* Byte Enables of the Internal memory access. These are interpred in BE */ -+#define PE_MEM_ACCESS_BYTE_ENABLE(offset, size) \ -+ ({ typeof(size) size_ = (size); \ -+ (((BIT(size_) - 1) << (4 - (offset) - (size_))) & 0xf) << 24; }) -+ -+#include "cbus/emac_mtip.h" -+#include "cbus/gpi.h" -+#include "cbus/bmu.h" -+#include "cbus/hif.h" -+#include "cbus/tmu_csr.h" -+#include "cbus/class_csr.h" -+#include "cbus/hif_nocpy.h" -+#include "cbus/util_csr.h" -+ -+/* PFE cores states */ -+#define CORE_DISABLE 0x00000000 -+#define CORE_ENABLE 0x00000001 -+#define CORE_SW_RESET 0x00000002 -+ -+/* LMEM defines */ -+#define LMEM_HDR_SIZE 0x0010 -+#define LMEM_BUF_SIZE_LN2 0x7 -+#define LMEM_BUF_SIZE BIT(LMEM_BUF_SIZE_LN2) -+ -+/* DDR defines */ -+#define DDR_HDR_SIZE 0x0100 -+#define DDR_BUF_SIZE_LN2 0xb -+#define DDR_BUF_SIZE BIT(DDR_BUF_SIZE_LN2) -+ -+#endif /* _CBUS_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/bmu.h -@@ -0,0 +1,55 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _BMU_H_ -+#define _BMU_H_ -+ -+#define BMU_VERSION 0x000 -+#define BMU_CTRL 0x004 -+#define BMU_UCAST_CONFIG 0x008 -+#define BMU_UCAST_BASE_ADDR 0x00c -+#define BMU_BUF_SIZE 0x010 -+#define BMU_BUF_CNT 0x014 -+#define BMU_THRES 0x018 -+#define BMU_INT_SRC 0x020 -+#define BMU_INT_ENABLE 0x024 -+#define BMU_ALLOC_CTRL 0x030 -+#define BMU_FREE_CTRL 0x034 -+#define BMU_FREE_ERR_ADDR 0x038 -+#define BMU_CURR_BUF_CNT 0x03c -+#define BMU_MCAST_CNT 0x040 -+#define BMU_MCAST_ALLOC_CTRL 0x044 -+#define BMU_REM_BUF_CNT 0x048 -+#define BMU_LOW_WATERMARK 0x050 -+#define BMU_HIGH_WATERMARK 0x054 -+#define BMU_INT_MEM_ACCESS 0x100 -+ -+struct BMU_CFG { -+ unsigned long baseaddr; -+ u32 count; -+ u32 size; -+ u32 low_watermark; -+ u32 high_watermark; -+}; -+ -+#define BMU1_BUF_SIZE LMEM_BUF_SIZE_LN2 -+#define BMU2_BUF_SIZE DDR_BUF_SIZE_LN2 -+ -+#define BMU2_MCAST_ALLOC_CTRL (BMU2_BASE_ADDR + BMU_MCAST_ALLOC_CTRL) -+ -+#endif /* _BMU_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/class_csr.h -@@ -0,0 +1,289 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _CLASS_CSR_H_ -+#define _CLASS_CSR_H_ -+ -+/* @file class_csr.h. -+ * class_csr - block containing all the classifier control and status register. -+ * Mapped on CBUS and accessible from all PE's and ARM. -+ */ -+#define CLASS_VERSION (CLASS_CSR_BASE_ADDR + 0x000) -+#define CLASS_TX_CTRL (CLASS_CSR_BASE_ADDR + 0x004) -+#define CLASS_INQ_PKTPTR (CLASS_CSR_BASE_ADDR + 0x010) -+ -+/* (ddr_hdr_size[24:16], lmem_hdr_size[5:0]) */ -+#define CLASS_HDR_SIZE (CLASS_CSR_BASE_ADDR + 0x014) -+ -+/* LMEM header size for the Classifier block.\ Data in the LMEM -+ * is written from this offset. -+ */ -+#define CLASS_HDR_SIZE_LMEM(off) ((off) & 0x3f) -+ -+/* DDR header size for the Classifier block.\ Data in the DDR -+ * is written from this offset. -+ */ -+#define CLASS_HDR_SIZE_DDR(off) (((off) & 0x1ff) << 16) -+ -+#define CLASS_PE0_QB_DM_ADDR0 (CLASS_CSR_BASE_ADDR + 0x020) -+ -+/* DMEM address of first [15:0] and second [31:16] buffers on QB side. */ -+#define CLASS_PE0_QB_DM_ADDR1 (CLASS_CSR_BASE_ADDR + 0x024) -+ -+/* DMEM address of third [15:0] and fourth [31:16] buffers on QB side. */ -+#define CLASS_PE0_RO_DM_ADDR0 (CLASS_CSR_BASE_ADDR + 0x060) -+ -+/* DMEM address of first [15:0] and second [31:16] buffers on RO side. */ -+#define CLASS_PE0_RO_DM_ADDR1 (CLASS_CSR_BASE_ADDR + 0x064) -+ -+/* DMEM address of third [15:0] and fourth [31:16] buffers on RO side. */ -+ -+/* @name Class PE memory access. Allows external PE's and HOST to -+ * read/write PMEM/DMEM memory ranges for each classifier PE. -+ */ -+/* {sr_pe_mem_cmd[31], csr_pe_mem_wren[27:24], csr_pe_mem_addr[23:0]}, -+ * See \ref XXX_MEM_ACCESS_ADDR for details. -+ */ -+#define CLASS_MEM_ACCESS_ADDR (CLASS_CSR_BASE_ADDR + 0x100) -+ -+/* Internal Memory Access Write Data [31:0] */ -+#define CLASS_MEM_ACCESS_WDATA (CLASS_CSR_BASE_ADDR + 0x104) -+ -+/* Internal Memory Access Read Data [31:0] */ -+#define CLASS_MEM_ACCESS_RDATA (CLASS_CSR_BASE_ADDR + 0x108) -+#define CLASS_TM_INQ_ADDR (CLASS_CSR_BASE_ADDR + 0x114) -+#define CLASS_PE_STATUS (CLASS_CSR_BASE_ADDR + 0x118) -+ -+#define CLASS_PHY1_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x11c) -+#define CLASS_PHY1_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x120) -+#define CLASS_PHY1_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x124) -+#define CLASS_PHY1_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x128) -+#define CLASS_PHY1_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x12c) -+#define CLASS_PHY1_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x130) -+#define CLASS_PHY1_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x134) -+#define CLASS_PHY1_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x138) -+#define CLASS_PHY1_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x13c) -+#define CLASS_PHY1_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x140) -+#define CLASS_PHY2_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x144) -+#define CLASS_PHY2_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x148) -+#define CLASS_PHY2_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x14c) -+#define CLASS_PHY2_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x150) -+#define CLASS_PHY2_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x154) -+#define CLASS_PHY2_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x158) -+#define CLASS_PHY2_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x15c) -+#define CLASS_PHY2_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x160) -+#define CLASS_PHY2_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x164) -+#define CLASS_PHY2_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x168) -+#define CLASS_PHY3_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x16c) -+#define CLASS_PHY3_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x170) -+#define CLASS_PHY3_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x174) -+#define CLASS_PHY3_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x178) -+#define CLASS_PHY3_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x17c) -+#define CLASS_PHY3_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x180) -+#define CLASS_PHY3_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x184) -+#define CLASS_PHY3_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x188) -+#define CLASS_PHY3_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x18c) -+#define CLASS_PHY3_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x190) -+#define CLASS_PHY1_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x194) -+#define CLASS_PHY1_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x198) -+#define CLASS_PHY1_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x19c) -+#define CLASS_PHY1_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1a0) -+#define CLASS_PHY2_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1a4) -+#define CLASS_PHY2_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1a8) -+#define CLASS_PHY2_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x1ac) -+#define CLASS_PHY2_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1b0) -+#define CLASS_PHY3_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1b4) -+#define CLASS_PHY3_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1b8) -+#define CLASS_PHY3_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x1bc) -+#define CLASS_PHY3_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1c0) -+#define CLASS_PHY4_ICMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1c4) -+#define CLASS_PHY4_IGMP_PKTS (CLASS_CSR_BASE_ADDR + 0x1c8) -+#define CLASS_PHY4_TCP_PKTS (CLASS_CSR_BASE_ADDR + 0x1cc) -+#define CLASS_PHY4_UDP_PKTS (CLASS_CSR_BASE_ADDR + 0x1d0) -+#define CLASS_PHY4_RX_PKTS (CLASS_CSR_BASE_ADDR + 0x1d4) -+#define CLASS_PHY4_TX_PKTS (CLASS_CSR_BASE_ADDR + 0x1d8) -+#define CLASS_PHY4_LP_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x1dc) -+#define CLASS_PHY4_INTF_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x1e0) -+#define CLASS_PHY4_INTF_MATCH_PKTS (CLASS_CSR_BASE_ADDR + 0x1e4) -+#define CLASS_PHY4_L3_FAIL_PKTS (CLASS_CSR_BASE_ADDR + 0x1e8) -+#define CLASS_PHY4_V4_PKTS (CLASS_CSR_BASE_ADDR + 0x1ec) -+#define CLASS_PHY4_V6_PKTS (CLASS_CSR_BASE_ADDR + 0x1f0) -+#define CLASS_PHY4_CHKSUM_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x1f4) -+#define CLASS_PHY4_TTL_ERR_PKTS (CLASS_CSR_BASE_ADDR + 0x1f8) -+ -+#define CLASS_PE_SYS_CLK_RATIO (CLASS_CSR_BASE_ADDR + 0x200) -+#define CLASS_AFULL_THRES (CLASS_CSR_BASE_ADDR + 0x204) -+#define CLASS_GAP_BETWEEN_READS (CLASS_CSR_BASE_ADDR + 0x208) -+#define CLASS_MAX_BUF_CNT (CLASS_CSR_BASE_ADDR + 0x20c) -+#define CLASS_TSQ_FIFO_THRES (CLASS_CSR_BASE_ADDR + 0x210) -+#define CLASS_TSQ_MAX_CNT (CLASS_CSR_BASE_ADDR + 0x214) -+#define CLASS_IRAM_DATA_0 (CLASS_CSR_BASE_ADDR + 0x218) -+#define CLASS_IRAM_DATA_1 (CLASS_CSR_BASE_ADDR + 0x21c) -+#define CLASS_IRAM_DATA_2 (CLASS_CSR_BASE_ADDR + 0x220) -+#define CLASS_IRAM_DATA_3 (CLASS_CSR_BASE_ADDR + 0x224) -+ -+#define CLASS_BUS_ACCESS_ADDR (CLASS_CSR_BASE_ADDR + 0x228) -+ -+#define CLASS_BUS_ACCESS_WDATA (CLASS_CSR_BASE_ADDR + 0x22c) -+#define CLASS_BUS_ACCESS_RDATA (CLASS_CSR_BASE_ADDR + 0x230) -+ -+/* (route_entry_size[9:0], route_hash_size[23:16] -+ * (this is actually ln2(size))) -+ */ -+#define CLASS_ROUTE_HASH_ENTRY_SIZE (CLASS_CSR_BASE_ADDR + 0x234) -+ -+#define CLASS_ROUTE_ENTRY_SIZE(size) ((size) & 0x1ff) -+#define CLASS_ROUTE_HASH_SIZE(hash_bits) (((hash_bits) & 0xff) << 16) -+ -+#define CLASS_ROUTE_TABLE_BASE (CLASS_CSR_BASE_ADDR + 0x238) -+ -+#define CLASS_ROUTE_MULTI (CLASS_CSR_BASE_ADDR + 0x23c) -+#define CLASS_SMEM_OFFSET (CLASS_CSR_BASE_ADDR + 0x240) -+#define CLASS_LMEM_BUF_SIZE (CLASS_CSR_BASE_ADDR + 0x244) -+#define CLASS_VLAN_ID (CLASS_CSR_BASE_ADDR + 0x248) -+#define CLASS_BMU1_BUF_FREE (CLASS_CSR_BASE_ADDR + 0x24c) -+#define CLASS_USE_TMU_INQ (CLASS_CSR_BASE_ADDR + 0x250) -+#define CLASS_VLAN_ID1 (CLASS_CSR_BASE_ADDR + 0x254) -+ -+#define CLASS_BUS_ACCESS_BASE (CLASS_CSR_BASE_ADDR + 0x258) -+#define CLASS_BUS_ACCESS_BASE_MASK (0xFF000000) -+/* bit 31:24 of PE peripheral address are stored in CLASS_BUS_ACCESS_BASE */ -+ -+#define CLASS_HIF_PARSE (CLASS_CSR_BASE_ADDR + 0x25c) -+ -+#define CLASS_HOST_PE0_GP (CLASS_CSR_BASE_ADDR + 0x260) -+#define CLASS_PE0_GP (CLASS_CSR_BASE_ADDR + 0x264) -+#define CLASS_HOST_PE1_GP (CLASS_CSR_BASE_ADDR + 0x268) -+#define CLASS_PE1_GP (CLASS_CSR_BASE_ADDR + 0x26c) -+#define CLASS_HOST_PE2_GP (CLASS_CSR_BASE_ADDR + 0x270) -+#define CLASS_PE2_GP (CLASS_CSR_BASE_ADDR + 0x274) -+#define CLASS_HOST_PE3_GP (CLASS_CSR_BASE_ADDR + 0x278) -+#define CLASS_PE3_GP (CLASS_CSR_BASE_ADDR + 0x27c) -+#define CLASS_HOST_PE4_GP (CLASS_CSR_BASE_ADDR + 0x280) -+#define CLASS_PE4_GP (CLASS_CSR_BASE_ADDR + 0x284) -+#define CLASS_HOST_PE5_GP (CLASS_CSR_BASE_ADDR + 0x288) -+#define CLASS_PE5_GP (CLASS_CSR_BASE_ADDR + 0x28c) -+ -+#define CLASS_PE_INT_SRC (CLASS_CSR_BASE_ADDR + 0x290) -+#define CLASS_PE_INT_ENABLE (CLASS_CSR_BASE_ADDR + 0x294) -+ -+#define CLASS_TPID0_TPID1 (CLASS_CSR_BASE_ADDR + 0x298) -+#define CLASS_TPID2 (CLASS_CSR_BASE_ADDR + 0x29c) -+ -+#define CLASS_L4_CHKSUM_ADDR (CLASS_CSR_BASE_ADDR + 0x2a0) -+ -+#define CLASS_PE0_DEBUG (CLASS_CSR_BASE_ADDR + 0x2a4) -+#define CLASS_PE1_DEBUG (CLASS_CSR_BASE_ADDR + 0x2a8) -+#define CLASS_PE2_DEBUG (CLASS_CSR_BASE_ADDR + 0x2ac) -+#define CLASS_PE3_DEBUG (CLASS_CSR_BASE_ADDR + 0x2b0) -+#define CLASS_PE4_DEBUG (CLASS_CSR_BASE_ADDR + 0x2b4) -+#define CLASS_PE5_DEBUG (CLASS_CSR_BASE_ADDR + 0x2b8) -+ -+#define CLASS_STATE (CLASS_CSR_BASE_ADDR + 0x2bc) -+ -+/* CLASS defines */ -+#define CLASS_PBUF_SIZE 0x100 /* Fixed by hardware */ -+#define CLASS_PBUF_HEADER_OFFSET 0x80 /* Can be configured */ -+ -+/* Can be configured */ -+#define CLASS_PBUF0_BASE_ADDR 0x000 -+/* Can be configured */ -+#define CLASS_PBUF1_BASE_ADDR (CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_SIZE) -+/* Can be configured */ -+#define CLASS_PBUF2_BASE_ADDR (CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_SIZE) -+/* Can be configured */ -+#define CLASS_PBUF3_BASE_ADDR (CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_SIZE) -+ -+#define CLASS_PBUF0_HEADER_BASE_ADDR (CLASS_PBUF0_BASE_ADDR + \ -+ CLASS_PBUF_HEADER_OFFSET) -+#define CLASS_PBUF1_HEADER_BASE_ADDR (CLASS_PBUF1_BASE_ADDR + \ -+ CLASS_PBUF_HEADER_OFFSET) -+#define CLASS_PBUF2_HEADER_BASE_ADDR (CLASS_PBUF2_BASE_ADDR + \ -+ CLASS_PBUF_HEADER_OFFSET) -+#define CLASS_PBUF3_HEADER_BASE_ADDR (CLASS_PBUF3_BASE_ADDR + \ -+ CLASS_PBUF_HEADER_OFFSET) -+ -+#define CLASS_PE0_RO_DM_ADDR0_VAL ((CLASS_PBUF1_BASE_ADDR << 16) | \ -+ CLASS_PBUF0_BASE_ADDR) -+#define CLASS_PE0_RO_DM_ADDR1_VAL ((CLASS_PBUF3_BASE_ADDR << 16) | \ -+ CLASS_PBUF2_BASE_ADDR) -+ -+#define CLASS_PE0_QB_DM_ADDR0_VAL ((CLASS_PBUF1_HEADER_BASE_ADDR << 16) |\ -+ CLASS_PBUF0_HEADER_BASE_ADDR) -+#define CLASS_PE0_QB_DM_ADDR1_VAL ((CLASS_PBUF3_HEADER_BASE_ADDR << 16) |\ -+ CLASS_PBUF2_HEADER_BASE_ADDR) -+ -+#define CLASS_ROUTE_SIZE 128 -+#define CLASS_MAX_ROUTE_SIZE 256 -+#define CLASS_ROUTE_HASH_BITS 20 -+#define CLASS_ROUTE_HASH_MASK (BIT(CLASS_ROUTE_HASH_BITS) - 1) -+ -+/* Can be configured */ -+#define CLASS_ROUTE0_BASE_ADDR 0x400 -+/* Can be configured */ -+#define CLASS_ROUTE1_BASE_ADDR (CLASS_ROUTE0_BASE_ADDR + CLASS_ROUTE_SIZE) -+/* Can be configured */ -+#define CLASS_ROUTE2_BASE_ADDR (CLASS_ROUTE1_BASE_ADDR + CLASS_ROUTE_SIZE) -+/* Can be configured */ -+#define CLASS_ROUTE3_BASE_ADDR (CLASS_ROUTE2_BASE_ADDR + CLASS_ROUTE_SIZE) -+ -+#define CLASS_SA_SIZE 128 -+#define CLASS_IPSEC_SA0_BASE_ADDR 0x600 -+/* not used */ -+#define CLASS_IPSEC_SA1_BASE_ADDR (CLASS_IPSEC_SA0_BASE_ADDR + CLASS_SA_SIZE) -+/* not used */ -+#define CLASS_IPSEC_SA2_BASE_ADDR (CLASS_IPSEC_SA1_BASE_ADDR + CLASS_SA_SIZE) -+/* not used */ -+#define CLASS_IPSEC_SA3_BASE_ADDR (CLASS_IPSEC_SA2_BASE_ADDR + CLASS_SA_SIZE) -+ -+/* generic purpose free dmem buffer, last portion of 2K dmem pbuf */ -+#define CLASS_GP_DMEM_BUF_SIZE (2048 - (CLASS_PBUF_SIZE * 4) - \ -+ (CLASS_ROUTE_SIZE * 4) - (CLASS_SA_SIZE)) -+#define CLASS_GP_DMEM_BUF ((void *)(CLASS_IPSEC_SA0_BASE_ADDR + \ -+ CLASS_SA_SIZE)) -+ -+#define TWO_LEVEL_ROUTE BIT(0) -+#define PHYNO_IN_HASH BIT(1) -+#define HW_ROUTE_FETCH BIT(3) -+#define HW_BRIDGE_FETCH BIT(5) -+#define IP_ALIGNED BIT(6) -+#define ARC_HIT_CHECK_EN BIT(7) -+#define CLASS_TOE BIT(11) -+#define HASH_NORMAL (0 << 12) -+#define HASH_CRC_PORT BIT(12) -+#define HASH_CRC_IP (2 << 12) -+#define HASH_CRC_PORT_IP (3 << 12) -+#define QB2BUS_LE BIT(15) -+ -+#define TCP_CHKSUM_DROP BIT(0) -+#define UDP_CHKSUM_DROP BIT(1) -+#define IPV4_CHKSUM_DROP BIT(9) -+ -+/*CLASS_HIF_PARSE bits*/ -+#define HIF_PKT_CLASS_EN BIT(0) -+#define HIF_PKT_OFFSET(ofst) (((ofst) & 0xF) << 1) -+ -+struct class_cfg { -+ u32 toe_mode; -+ unsigned long route_table_baseaddr; -+ u32 route_table_hash_bits; -+ u32 pe_sys_clk_ratio; -+ u32 resume; -+}; -+ -+#endif /* _CLASS_CSR_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/emac_mtip.h -@@ -0,0 +1,242 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _EMAC_H_ -+#define _EMAC_H_ -+ -+#include <linux/ethtool.h> -+ -+#define EMAC_IEVENT_REG 0x004 -+#define EMAC_IMASK_REG 0x008 -+#define EMAC_R_DES_ACTIVE_REG 0x010 -+#define EMAC_X_DES_ACTIVE_REG 0x014 -+#define EMAC_ECNTRL_REG 0x024 -+#define EMAC_MII_DATA_REG 0x040 -+#define EMAC_MII_CTRL_REG 0x044 -+#define EMAC_MIB_CTRL_STS_REG 0x064 -+#define EMAC_RCNTRL_REG 0x084 -+#define EMAC_TCNTRL_REG 0x0C4 -+#define EMAC_PHY_ADDR_LOW 0x0E4 -+#define EMAC_PHY_ADDR_HIGH 0x0E8 -+#define EMAC_GAUR 0x120 -+#define EMAC_GALR 0x124 -+#define EMAC_TFWR_STR_FWD 0x144 -+#define EMAC_RX_SECTION_FULL 0x190 -+#define EMAC_RX_SECTION_EMPTY 0x194 -+#define EMAC_TX_SECTION_EMPTY 0x1A0 -+#define EMAC_TRUNC_FL 0x1B0 -+ -+#define RMON_T_DROP 0x200 /* Count of frames not cntd correctly */ -+#define RMON_T_PACKETS 0x204 /* RMON TX packet count */ -+#define RMON_T_BC_PKT 0x208 /* RMON TX broadcast pkts */ -+#define RMON_T_MC_PKT 0x20c /* RMON TX multicast pkts */ -+#define RMON_T_CRC_ALIGN 0x210 /* RMON TX pkts with CRC align err */ -+#define RMON_T_UNDERSIZE 0x214 /* RMON TX pkts < 64 bytes, good CRC */ -+#define RMON_T_OVERSIZE 0x218 /* RMON TX pkts > MAX_FL bytes good CRC */ -+#define RMON_T_FRAG 0x21c /* RMON TX pkts < 64 bytes, bad CRC */ -+#define RMON_T_JAB 0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */ -+#define RMON_T_COL 0x224 /* RMON TX collision count */ -+#define RMON_T_P64 0x228 /* RMON TX 64 byte pkts */ -+#define RMON_T_P65TO127 0x22c /* RMON TX 65 to 127 byte pkts */ -+#define RMON_T_P128TO255 0x230 /* RMON TX 128 to 255 byte pkts */ -+#define RMON_T_P256TO511 0x234 /* RMON TX 256 to 511 byte pkts */ -+#define RMON_T_P512TO1023 0x238 /* RMON TX 512 to 1023 byte pkts */ -+#define RMON_T_P1024TO2047 0x23c /* RMON TX 1024 to 2047 byte pkts */ -+#define RMON_T_P_GTE2048 0x240 /* RMON TX pkts > 2048 bytes */ -+#define RMON_T_OCTETS 0x244 /* RMON TX octets */ -+#define IEEE_T_DROP 0x248 /* Count of frames not counted crtly */ -+#define IEEE_T_FRAME_OK 0x24c /* Frames tx'd OK */ -+#define IEEE_T_1COL 0x250 /* Frames tx'd with single collision */ -+#define IEEE_T_MCOL 0x254 /* Frames tx'd with multiple collision */ -+#define IEEE_T_DEF 0x258 /* Frames tx'd after deferral delay */ -+#define IEEE_T_LCOL 0x25c /* Frames tx'd with late collision */ -+#define IEEE_T_EXCOL 0x260 /* Frames tx'd with excesv collisions */ -+#define IEEE_T_MACERR 0x264 /* Frames tx'd with TX FIFO underrun */ -+#define IEEE_T_CSERR 0x268 /* Frames tx'd with carrier sense err */ -+#define IEEE_T_SQE 0x26c /* Frames tx'd with SQE err */ -+#define IEEE_T_FDXFC 0x270 /* Flow control pause frames tx'd */ -+#define IEEE_T_OCTETS_OK 0x274 /* Octet count for frames tx'd w/o err */ -+#define RMON_R_PACKETS 0x284 /* RMON RX packet count */ -+#define RMON_R_BC_PKT 0x288 /* RMON RX broadcast pkts */ -+#define RMON_R_MC_PKT 0x28c /* RMON RX multicast pkts */ -+#define RMON_R_CRC_ALIGN 0x290 /* RMON RX pkts with CRC alignment err */ -+#define RMON_R_UNDERSIZE 0x294 /* RMON RX pkts < 64 bytes, good CRC */ -+#define RMON_R_OVERSIZE 0x298 /* RMON RX pkts > MAX_FL bytes good CRC */ -+#define RMON_R_FRAG 0x29c /* RMON RX pkts < 64 bytes, bad CRC */ -+#define RMON_R_JAB 0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */ -+#define RMON_R_RESVD_O 0x2a4 /* Reserved */ -+#define RMON_R_P64 0x2a8 /* RMON RX 64 byte pkts */ -+#define RMON_R_P65TO127 0x2ac /* RMON RX 65 to 127 byte pkts */ -+#define RMON_R_P128TO255 0x2b0 /* RMON RX 128 to 255 byte pkts */ -+#define RMON_R_P256TO511 0x2b4 /* RMON RX 256 to 511 byte pkts */ -+#define RMON_R_P512TO1023 0x2b8 /* RMON RX 512 to 1023 byte pkts */ -+#define RMON_R_P1024TO2047 0x2bc /* RMON RX 1024 to 2047 byte pkts */ -+#define RMON_R_P_GTE2048 0x2c0 /* RMON RX pkts > 2048 bytes */ -+#define RMON_R_OCTETS 0x2c4 /* RMON RX octets */ -+#define IEEE_R_DROP 0x2c8 /* Count frames not counted correctly */ -+#define IEEE_R_FRAME_OK 0x2cc /* Frames rx'd OK */ -+#define IEEE_R_CRC 0x2d0 /* Frames rx'd with CRC err */ -+#define IEEE_R_ALIGN 0x2d4 /* Frames rx'd with alignment err */ -+#define IEEE_R_MACERR 0x2d8 /* Receive FIFO overflow count */ -+#define IEEE_R_FDXFC 0x2dc /* Flow control pause frames rx'd */ -+#define IEEE_R_OCTETS_OK 0x2e0 /* Octet cnt for frames rx'd w/o err */ -+ -+#define EMAC_SMAC_0_0 0x500 /*Supplemental MAC Address 0 (RW).*/ -+#define EMAC_SMAC_0_1 0x504 /*Supplemental MAC Address 0 (RW).*/ -+ -+/* GEMAC definitions and settings */ -+ -+#define EMAC_PORT_0 0 -+#define EMAC_PORT_1 1 -+ -+/* GEMAC Bit definitions */ -+#define EMAC_IEVENT_HBERR 0x80000000 -+#define EMAC_IEVENT_BABR 0x40000000 -+#define EMAC_IEVENT_BABT 0x20000000 -+#define EMAC_IEVENT_GRA 0x10000000 -+#define EMAC_IEVENT_TXF 0x08000000 -+#define EMAC_IEVENT_TXB 0x04000000 -+#define EMAC_IEVENT_RXF 0x02000000 -+#define EMAC_IEVENT_RXB 0x01000000 -+#define EMAC_IEVENT_MII 0x00800000 -+#define EMAC_IEVENT_EBERR 0x00400000 -+#define EMAC_IEVENT_LC 0x00200000 -+#define EMAC_IEVENT_RL 0x00100000 -+#define EMAC_IEVENT_UN 0x00080000 -+ -+#define EMAC_IMASK_HBERR 0x80000000 -+#define EMAC_IMASK_BABR 0x40000000 -+#define EMAC_IMASKT_BABT 0x20000000 -+#define EMAC_IMASK_GRA 0x10000000 -+#define EMAC_IMASKT_TXF 0x08000000 -+#define EMAC_IMASK_TXB 0x04000000 -+#define EMAC_IMASKT_RXF 0x02000000 -+#define EMAC_IMASK_RXB 0x01000000 -+#define EMAC_IMASK_MII 0x00800000 -+#define EMAC_IMASK_EBERR 0x00400000 -+#define EMAC_IMASK_LC 0x00200000 -+#define EMAC_IMASKT_RL 0x00100000 -+#define EMAC_IMASK_UN 0x00080000 -+ -+#define EMAC_RCNTRL_MAX_FL_SHIFT 16 -+#define EMAC_RCNTRL_LOOP 0x00000001 -+#define EMAC_RCNTRL_DRT 0x00000002 -+#define EMAC_RCNTRL_MII_MODE 0x00000004 -+#define EMAC_RCNTRL_PROM 0x00000008 -+#define EMAC_RCNTRL_BC_REJ 0x00000010 -+#define EMAC_RCNTRL_FCE 0x00000020 -+#define EMAC_RCNTRL_RGMII 0x00000040 -+#define EMAC_RCNTRL_SGMII 0x00000080 -+#define EMAC_RCNTRL_RMII 0x00000100 -+#define EMAC_RCNTRL_RMII_10T 0x00000200 -+#define EMAC_RCNTRL_CRC_FWD 0x00004000 -+ -+#define EMAC_TCNTRL_GTS 0x00000001 -+#define EMAC_TCNTRL_HBC 0x00000002 -+#define EMAC_TCNTRL_FDEN 0x00000004 -+#define EMAC_TCNTRL_TFC_PAUSE 0x00000008 -+#define EMAC_TCNTRL_RFC_PAUSE 0x00000010 -+ -+#define EMAC_ECNTRL_RESET 0x00000001 /* reset the EMAC */ -+#define EMAC_ECNTRL_ETHER_EN 0x00000002 /* enable the EMAC */ -+#define EMAC_ECNTRL_MAGIC_ENA 0x00000004 -+#define EMAC_ECNTRL_SLEEP 0x00000008 -+#define EMAC_ECNTRL_SPEED 0x00000020 -+#define EMAC_ECNTRL_DBSWAP 0x00000100 -+ -+#define EMAC_X_WMRK_STRFWD 0x00000100 -+ -+#define EMAC_X_DES_ACTIVE_TDAR 0x01000000 -+#define EMAC_R_DES_ACTIVE_RDAR 0x01000000 -+ -+#define EMAC_RX_SECTION_EMPTY_V 0x00010006 -+/* -+ * The possible operating speeds of the MAC, currently supporting 10, 100 and -+ * 1000Mb modes. -+ */ -+enum mac_speed {SPEED_10M, SPEED_100M, SPEED_1000M, SPEED_1000M_PCS}; -+ -+/* MII-related definitios */ -+#define EMAC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ -+#define EMAC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ -+#define EMAC_MII_DATA_OP_CL45_RD 0x30000000 /* Perform a read operation */ -+#define EMAC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ -+#define EMAC_MII_DATA_OP_CL45_WR 0x10000000 /* Perform a write operation */ -+#define EMAC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ -+#define EMAC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ -+#define EMAC_MII_DATA_TA 0x00020000 /* Turnaround */ -+#define EMAC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ -+ -+#define EMAC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ -+#define EMAC_MII_DATA_RA_MASK 0x1F /* MII Register address mask */ -+#define EMAC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ -+#define EMAC_MII_DATA_PA_MASK 0x1F /* MII PHY address mask */ -+ -+#define EMAC_MII_DATA_RA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \ -+ EMAC_MII_DATA_RA_SHIFT) -+#define EMAC_MII_DATA_PA(v) (((v) & EMAC_MII_DATA_RA_MASK) << \ -+ EMAC_MII_DATA_PA_SHIFT) -+#define EMAC_MII_DATA(v) ((v) & 0xffff) -+ -+#define EMAC_MII_SPEED_SHIFT 1 -+#define EMAC_HOLDTIME_SHIFT 8 -+#define EMAC_HOLDTIME_MASK 0x7 -+#define EMAC_HOLDTIME(v) (((v) & EMAC_HOLDTIME_MASK) << \ -+ EMAC_HOLDTIME_SHIFT) -+ -+/* -+ * The Address organisation for the MAC device. All addresses are split into -+ * two 32-bit register fields. The first one (bottom) is the lower 32-bits of -+ * the address and the other field are the high order bits - this may be 16-bits -+ * in the case of MAC addresses, or 32-bits for the hash address. -+ * In terms of memory storage, the first item (bottom) is assumed to be at a -+ * lower address location than 'top'. i.e. top should be at address location of -+ * 'bottom' + 4 bytes. -+ */ -+struct pfe_mac_addr { -+ u32 bottom; /* Lower 32-bits of address. */ -+ u32 top; /* Upper 32-bits of address. */ -+}; -+ -+/* -+ * The following is the organisation of the address filters section of the MAC -+ * registers. The Cadence MAC contains four possible specific address match -+ * addresses, if an incoming frame corresponds to any one of these four -+ * addresses then the frame will be copied to memory. -+ * It is not necessary for all four of the address match registers to be -+ * programmed, this is application dependent. -+ */ -+struct spec_addr { -+ struct pfe_mac_addr one; /* Specific address register 1. */ -+ struct pfe_mac_addr two; /* Specific address register 2. */ -+ struct pfe_mac_addr three; /* Specific address register 3. */ -+ struct pfe_mac_addr four; /* Specific address register 4. */ -+}; -+ -+struct gemac_cfg { -+ u32 mode; -+ u32 speed; -+ u32 duplex; -+}; -+ -+/* EMAC Hash size */ -+#define EMAC_HASH_REG_BITS 64 -+ -+#define EMAC_SPEC_ADDR_MAX 4 -+ -+#endif /* _EMAC_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/gpi.h -@@ -0,0 +1,86 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _GPI_H_ -+#define _GPI_H_ -+ -+#define GPI_VERSION 0x00 -+#define GPI_CTRL 0x04 -+#define GPI_RX_CONFIG 0x08 -+#define GPI_HDR_SIZE 0x0c -+#define GPI_BUF_SIZE 0x10 -+#define GPI_LMEM_ALLOC_ADDR 0x14 -+#define GPI_LMEM_FREE_ADDR 0x18 -+#define GPI_DDR_ALLOC_ADDR 0x1c -+#define GPI_DDR_FREE_ADDR 0x20 -+#define GPI_CLASS_ADDR 0x24 -+#define GPI_DRX_FIFO 0x28 -+#define GPI_TRX_FIFO 0x2c -+#define GPI_INQ_PKTPTR 0x30 -+#define GPI_DDR_DATA_OFFSET 0x34 -+#define GPI_LMEM_DATA_OFFSET 0x38 -+#define GPI_TMLF_TX 0x4c -+#define GPI_DTX_ASEQ 0x50 -+#define GPI_FIFO_STATUS 0x54 -+#define GPI_FIFO_DEBUG 0x58 -+#define GPI_TX_PAUSE_TIME 0x5c -+#define GPI_LMEM_SEC_BUF_DATA_OFFSET 0x60 -+#define GPI_DDR_SEC_BUF_DATA_OFFSET 0x64 -+#define GPI_TOE_CHKSUM_EN 0x68 -+#define GPI_OVERRUN_DROPCNT 0x6c -+#define GPI_CSR_MTIP_PAUSE_REG 0x74 -+#define GPI_CSR_MTIP_PAUSE_QUANTUM 0x78 -+#define GPI_CSR_RX_CNT 0x7c -+#define GPI_CSR_TX_CNT 0x80 -+#define GPI_CSR_DEBUG1 0x84 -+#define GPI_CSR_DEBUG2 0x88 -+ -+struct gpi_cfg { -+ u32 lmem_rtry_cnt; -+ u32 tmlf_txthres; -+ u32 aseq_len; -+ u32 mtip_pause_reg; -+}; -+ -+/* GPI commons defines */ -+#define GPI_LMEM_BUF_EN 0x1 -+#define GPI_DDR_BUF_EN 0x1 -+ -+/* EGPI 1 defines */ -+#define EGPI1_LMEM_RTRY_CNT 0x40 -+#define EGPI1_TMLF_TXTHRES 0xBC -+#define EGPI1_ASEQ_LEN 0x50 -+ -+/* EGPI 2 defines */ -+#define EGPI2_LMEM_RTRY_CNT 0x40 -+#define EGPI2_TMLF_TXTHRES 0xBC -+#define EGPI2_ASEQ_LEN 0x40 -+ -+/* EGPI 3 defines */ -+#define EGPI3_LMEM_RTRY_CNT 0x40 -+#define EGPI3_TMLF_TXTHRES 0xBC -+#define EGPI3_ASEQ_LEN 0x40 -+ -+/* HGPI defines */ -+#define HGPI_LMEM_RTRY_CNT 0x40 -+#define HGPI_TMLF_TXTHRES 0xBC -+#define HGPI_ASEQ_LEN 0x40 -+ -+#define EGPI_PAUSE_TIME 0x000007D0 -+#define EGPI_PAUSE_ENABLE 0x40000000 -+#endif /* _GPI_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif.h -@@ -0,0 +1,100 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _HIF_H_ -+#define _HIF_H_ -+ -+/* @file hif.h. -+ * hif - PFE hif block control and status register. -+ * Mapped on CBUS and accessible from all PE's and ARM. -+ */ -+#define HIF_VERSION (HIF_BASE_ADDR + 0x00) -+#define HIF_TX_CTRL (HIF_BASE_ADDR + 0x04) -+#define HIF_TX_CURR_BD_ADDR (HIF_BASE_ADDR + 0x08) -+#define HIF_TX_ALLOC (HIF_BASE_ADDR + 0x0c) -+#define HIF_TX_BDP_ADDR (HIF_BASE_ADDR + 0x10) -+#define HIF_TX_STATUS (HIF_BASE_ADDR + 0x14) -+#define HIF_RX_CTRL (HIF_BASE_ADDR + 0x20) -+#define HIF_RX_BDP_ADDR (HIF_BASE_ADDR + 0x24) -+#define HIF_RX_STATUS (HIF_BASE_ADDR + 0x30) -+#define HIF_INT_SRC (HIF_BASE_ADDR + 0x34) -+#define HIF_INT_ENABLE (HIF_BASE_ADDR + 0x38) -+#define HIF_POLL_CTRL (HIF_BASE_ADDR + 0x3c) -+#define HIF_RX_CURR_BD_ADDR (HIF_BASE_ADDR + 0x40) -+#define HIF_RX_ALLOC (HIF_BASE_ADDR + 0x44) -+#define HIF_TX_DMA_STATUS (HIF_BASE_ADDR + 0x48) -+#define HIF_RX_DMA_STATUS (HIF_BASE_ADDR + 0x4c) -+#define HIF_INT_COAL (HIF_BASE_ADDR + 0x50) -+ -+/* HIF_INT_SRC/ HIF_INT_ENABLE control bits */ -+#define HIF_INT BIT(0) -+#define HIF_RXBD_INT BIT(1) -+#define HIF_RXPKT_INT BIT(2) -+#define HIF_TXBD_INT BIT(3) -+#define HIF_TXPKT_INT BIT(4) -+ -+/* HIF_TX_CTRL bits */ -+#define HIF_CTRL_DMA_EN BIT(0) -+#define HIF_CTRL_BDP_POLL_CTRL_EN BIT(1) -+#define HIF_CTRL_BDP_CH_START_WSTB BIT(2) -+ -+/* HIF_RX_STATUS bits */ -+#define BDP_CSR_RX_DMA_ACTV BIT(16) -+ -+/* HIF_INT_ENABLE bits */ -+#define HIF_INT_EN BIT(0) -+#define HIF_RXBD_INT_EN BIT(1) -+#define HIF_RXPKT_INT_EN BIT(2) -+#define HIF_TXBD_INT_EN BIT(3) -+#define HIF_TXPKT_INT_EN BIT(4) -+ -+/* HIF_POLL_CTRL bits*/ -+#define HIF_RX_POLL_CTRL_CYCLE 0x0400 -+#define HIF_TX_POLL_CTRL_CYCLE 0x0400 -+ -+/* HIF_INT_COAL bits*/ -+#define HIF_INT_COAL_ENABLE BIT(31) -+ -+/* Buffer descriptor control bits */ -+#define BD_CTRL_BUFLEN_MASK 0x3fff -+#define BD_BUF_LEN(x) ((x) & BD_CTRL_BUFLEN_MASK) -+#define BD_CTRL_CBD_INT_EN BIT(16) -+#define BD_CTRL_PKT_INT_EN BIT(17) -+#define BD_CTRL_LIFM BIT(18) -+#define BD_CTRL_LAST_BD BIT(19) -+#define BD_CTRL_DIR BIT(20) -+#define BD_CTRL_LMEM_CPY BIT(21) /* Valid only for HIF_NOCPY */ -+#define BD_CTRL_PKT_XFER BIT(24) -+#define BD_CTRL_DESC_EN BIT(31) -+#define BD_CTRL_PARSE_DISABLE BIT(25) -+#define BD_CTRL_BRFETCH_DISABLE BIT(26) -+#define BD_CTRL_RTFETCH_DISABLE BIT(27) -+ -+/* Buffer descriptor status bits*/ -+#define BD_STATUS_CONN_ID(x) ((x) & 0xffff) -+#define BD_STATUS_DIR_PROC_ID BIT(16) -+#define BD_STATUS_CONN_ID_EN BIT(17) -+#define BD_STATUS_PE2PROC_ID(x) (((x) & 7) << 18) -+#define BD_STATUS_LE_DATA BIT(21) -+#define BD_STATUS_CHKSUM_EN BIT(22) -+ -+/* HIF Buffer descriptor status bits */ -+#define DIR_PROC_ID BIT(16) -+#define PROC_ID(id) ((id) << 18) -+ -+#endif /* _HIF_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/hif_nocpy.h -@@ -0,0 +1,50 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _HIF_NOCPY_H_ -+#define _HIF_NOCPY_H_ -+ -+#define HIF_NOCPY_VERSION (HIF_NOCPY_BASE_ADDR + 0x00) -+#define HIF_NOCPY_TX_CTRL (HIF_NOCPY_BASE_ADDR + 0x04) -+#define HIF_NOCPY_TX_CURR_BD_ADDR (HIF_NOCPY_BASE_ADDR + 0x08) -+#define HIF_NOCPY_TX_ALLOC (HIF_NOCPY_BASE_ADDR + 0x0c) -+#define HIF_NOCPY_TX_BDP_ADDR (HIF_NOCPY_BASE_ADDR + 0x10) -+#define HIF_NOCPY_TX_STATUS (HIF_NOCPY_BASE_ADDR + 0x14) -+#define HIF_NOCPY_RX_CTRL (HIF_NOCPY_BASE_ADDR + 0x20) -+#define HIF_NOCPY_RX_BDP_ADDR (HIF_NOCPY_BASE_ADDR + 0x24) -+#define HIF_NOCPY_RX_STATUS (HIF_NOCPY_BASE_ADDR + 0x30) -+#define HIF_NOCPY_INT_SRC (HIF_NOCPY_BASE_ADDR + 0x34) -+#define HIF_NOCPY_INT_ENABLE (HIF_NOCPY_BASE_ADDR + 0x38) -+#define HIF_NOCPY_POLL_CTRL (HIF_NOCPY_BASE_ADDR + 0x3c) -+#define HIF_NOCPY_RX_CURR_BD_ADDR (HIF_NOCPY_BASE_ADDR + 0x40) -+#define HIF_NOCPY_RX_ALLOC (HIF_NOCPY_BASE_ADDR + 0x44) -+#define HIF_NOCPY_TX_DMA_STATUS (HIF_NOCPY_BASE_ADDR + 0x48) -+#define HIF_NOCPY_RX_DMA_STATUS (HIF_NOCPY_BASE_ADDR + 0x4c) -+#define HIF_NOCPY_RX_INQ0_PKTPTR (HIF_NOCPY_BASE_ADDR + 0x50) -+#define HIF_NOCPY_RX_INQ1_PKTPTR (HIF_NOCPY_BASE_ADDR + 0x54) -+#define HIF_NOCPY_TX_PORT_NO (HIF_NOCPY_BASE_ADDR + 0x60) -+#define HIF_NOCPY_LMEM_ALLOC_ADDR (HIF_NOCPY_BASE_ADDR + 0x64) -+#define HIF_NOCPY_CLASS_ADDR (HIF_NOCPY_BASE_ADDR + 0x68) -+#define HIF_NOCPY_TMU_PORT0_ADDR (HIF_NOCPY_BASE_ADDR + 0x70) -+#define HIF_NOCPY_TMU_PORT1_ADDR (HIF_NOCPY_BASE_ADDR + 0x74) -+#define HIF_NOCPY_TMU_PORT2_ADDR (HIF_NOCPY_BASE_ADDR + 0x7c) -+#define HIF_NOCPY_TMU_PORT3_ADDR (HIF_NOCPY_BASE_ADDR + 0x80) -+#define HIF_NOCPY_TMU_PORT4_ADDR (HIF_NOCPY_BASE_ADDR + 0x84) -+#define HIF_NOCPY_INT_COAL (HIF_NOCPY_BASE_ADDR + 0x90) -+ -+#endif /* _HIF_NOCPY_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/tmu_csr.h -@@ -0,0 +1,168 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _TMU_CSR_H_ -+#define _TMU_CSR_H_ -+ -+#define TMU_VERSION (TMU_CSR_BASE_ADDR + 0x000) -+#define TMU_INQ_WATERMARK (TMU_CSR_BASE_ADDR + 0x004) -+#define TMU_PHY_INQ_PKTPTR (TMU_CSR_BASE_ADDR + 0x008) -+#define TMU_PHY_INQ_PKTINFO (TMU_CSR_BASE_ADDR + 0x00c) -+#define TMU_PHY_INQ_FIFO_CNT (TMU_CSR_BASE_ADDR + 0x010) -+#define TMU_SYS_GENERIC_CONTROL (TMU_CSR_BASE_ADDR + 0x014) -+#define TMU_SYS_GENERIC_STATUS (TMU_CSR_BASE_ADDR + 0x018) -+#define TMU_SYS_GEN_CON0 (TMU_CSR_BASE_ADDR + 0x01c) -+#define TMU_SYS_GEN_CON1 (TMU_CSR_BASE_ADDR + 0x020) -+#define TMU_SYS_GEN_CON2 (TMU_CSR_BASE_ADDR + 0x024) -+#define TMU_SYS_GEN_CON3 (TMU_CSR_BASE_ADDR + 0x028) -+#define TMU_SYS_GEN_CON4 (TMU_CSR_BASE_ADDR + 0x02c) -+#define TMU_TEQ_DISABLE_DROPCHK (TMU_CSR_BASE_ADDR + 0x030) -+#define TMU_TEQ_CTRL (TMU_CSR_BASE_ADDR + 0x034) -+#define TMU_TEQ_QCFG (TMU_CSR_BASE_ADDR + 0x038) -+#define TMU_TEQ_DROP_STAT (TMU_CSR_BASE_ADDR + 0x03c) -+#define TMU_TEQ_QAVG (TMU_CSR_BASE_ADDR + 0x040) -+#define TMU_TEQ_WREG_PROB (TMU_CSR_BASE_ADDR + 0x044) -+#define TMU_TEQ_TRANS_STAT (TMU_CSR_BASE_ADDR + 0x048) -+#define TMU_TEQ_HW_PROB_CFG0 (TMU_CSR_BASE_ADDR + 0x04c) -+#define TMU_TEQ_HW_PROB_CFG1 (TMU_CSR_BASE_ADDR + 0x050) -+#define TMU_TEQ_HW_PROB_CFG2 (TMU_CSR_BASE_ADDR + 0x054) -+#define TMU_TEQ_HW_PROB_CFG3 (TMU_CSR_BASE_ADDR + 0x058) -+#define TMU_TEQ_HW_PROB_CFG4 (TMU_CSR_BASE_ADDR + 0x05c) -+#define TMU_TEQ_HW_PROB_CFG5 (TMU_CSR_BASE_ADDR + 0x060) -+#define TMU_TEQ_HW_PROB_CFG6 (TMU_CSR_BASE_ADDR + 0x064) -+#define TMU_TEQ_HW_PROB_CFG7 (TMU_CSR_BASE_ADDR + 0x068) -+#define TMU_TEQ_HW_PROB_CFG8 (TMU_CSR_BASE_ADDR + 0x06c) -+#define TMU_TEQ_HW_PROB_CFG9 (TMU_CSR_BASE_ADDR + 0x070) -+#define TMU_TEQ_HW_PROB_CFG10 (TMU_CSR_BASE_ADDR + 0x074) -+#define TMU_TEQ_HW_PROB_CFG11 (TMU_CSR_BASE_ADDR + 0x078) -+#define TMU_TEQ_HW_PROB_CFG12 (TMU_CSR_BASE_ADDR + 0x07c) -+#define TMU_TEQ_HW_PROB_CFG13 (TMU_CSR_BASE_ADDR + 0x080) -+#define TMU_TEQ_HW_PROB_CFG14 (TMU_CSR_BASE_ADDR + 0x084) -+#define TMU_TEQ_HW_PROB_CFG15 (TMU_CSR_BASE_ADDR + 0x088) -+#define TMU_TEQ_HW_PROB_CFG16 (TMU_CSR_BASE_ADDR + 0x08c) -+#define TMU_TEQ_HW_PROB_CFG17 (TMU_CSR_BASE_ADDR + 0x090) -+#define TMU_TEQ_HW_PROB_CFG18 (TMU_CSR_BASE_ADDR + 0x094) -+#define TMU_TEQ_HW_PROB_CFG19 (TMU_CSR_BASE_ADDR + 0x098) -+#define TMU_TEQ_HW_PROB_CFG20 (TMU_CSR_BASE_ADDR + 0x09c) -+#define TMU_TEQ_HW_PROB_CFG21 (TMU_CSR_BASE_ADDR + 0x0a0) -+#define TMU_TEQ_HW_PROB_CFG22 (TMU_CSR_BASE_ADDR + 0x0a4) -+#define TMU_TEQ_HW_PROB_CFG23 (TMU_CSR_BASE_ADDR + 0x0a8) -+#define TMU_TEQ_HW_PROB_CFG24 (TMU_CSR_BASE_ADDR + 0x0ac) -+#define TMU_TEQ_HW_PROB_CFG25 (TMU_CSR_BASE_ADDR + 0x0b0) -+#define TMU_TDQ_IIFG_CFG (TMU_CSR_BASE_ADDR + 0x0b4) -+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ. -+ * This is a global Enable for all schedulers in PHY0 -+ */ -+#define TMU_TDQ0_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x0b8) -+ -+#define TMU_LLM_CTRL (TMU_CSR_BASE_ADDR + 0x0bc) -+#define TMU_LLM_BASE_ADDR (TMU_CSR_BASE_ADDR + 0x0c0) -+#define TMU_LLM_QUE_LEN (TMU_CSR_BASE_ADDR + 0x0c4) -+#define TMU_LLM_QUE_HEADPTR (TMU_CSR_BASE_ADDR + 0x0c8) -+#define TMU_LLM_QUE_TAILPTR (TMU_CSR_BASE_ADDR + 0x0cc) -+#define TMU_LLM_QUE_DROPCNT (TMU_CSR_BASE_ADDR + 0x0d0) -+#define TMU_INT_EN (TMU_CSR_BASE_ADDR + 0x0d4) -+#define TMU_INT_SRC (TMU_CSR_BASE_ADDR + 0x0d8) -+#define TMU_INQ_STAT (TMU_CSR_BASE_ADDR + 0x0dc) -+#define TMU_CTRL (TMU_CSR_BASE_ADDR + 0x0e0) -+ -+/* [31] Mem Access Command. 0 = Internal Memory Read, 1 = Internal memory -+ * Write [27:24] Byte Enables of the Internal memory access [23:0] Address of -+ * the internal memory. This address is used to access both the PM and DM of -+ * all the PE's -+ */ -+#define TMU_MEM_ACCESS_ADDR (TMU_CSR_BASE_ADDR + 0x0e4) -+ -+/* Internal Memory Access Write Data */ -+#define TMU_MEM_ACCESS_WDATA (TMU_CSR_BASE_ADDR + 0x0e8) -+/* Internal Memory Access Read Data. The commands are blocked -+ * at the mem_access only -+ */ -+#define TMU_MEM_ACCESS_RDATA (TMU_CSR_BASE_ADDR + 0x0ec) -+ -+/* [31:0] PHY0 in queue address (must be initialized with one of the -+ * xxx_INQ_PKTPTR cbus addresses) -+ */ -+#define TMU_PHY0_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0f0) -+/* [31:0] PHY1 in queue address (must be initialized with one of the -+ * xxx_INQ_PKTPTR cbus addresses) -+ */ -+#define TMU_PHY1_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0f4) -+/* [31:0] PHY2 in queue address (must be initialized with one of the -+ * xxx_INQ_PKTPTR cbus addresses) -+ */ -+#define TMU_PHY2_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0f8) -+/* [31:0] PHY3 in queue address (must be initialized with one of the -+ * xxx_INQ_PKTPTR cbus addresses) -+ */ -+#define TMU_PHY3_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x0fc) -+#define TMU_BMU_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x100) -+#define TMU_TX_CTRL (TMU_CSR_BASE_ADDR + 0x104) -+ -+#define TMU_BUS_ACCESS_WDATA (TMU_CSR_BASE_ADDR + 0x108) -+#define TMU_BUS_ACCESS (TMU_CSR_BASE_ADDR + 0x10c) -+#define TMU_BUS_ACCESS_RDATA (TMU_CSR_BASE_ADDR + 0x110) -+ -+#define TMU_PE_SYS_CLK_RATIO (TMU_CSR_BASE_ADDR + 0x114) -+#define TMU_PE_STATUS (TMU_CSR_BASE_ADDR + 0x118) -+#define TMU_TEQ_MAX_THRESHOLD (TMU_CSR_BASE_ADDR + 0x11c) -+/* [31:0] PHY4 in queue address (must be initialized with one of the -+ * xxx_INQ_PKTPTR cbus addresses) -+ */ -+#define TMU_PHY4_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x134) -+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ. -+ * This is a global Enable for all schedulers in PHY1 -+ */ -+#define TMU_TDQ1_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x138) -+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ. -+ * This is a global Enable for all schedulers in PHY2 -+ */ -+#define TMU_TDQ2_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x13c) -+/* [9:0] Scheduler Enable for each of the scheduler in the TDQ. -+ * This is a global Enable for all schedulers in PHY3 -+ */ -+#define TMU_TDQ3_SCH_CTRL (TMU_CSR_BASE_ADDR + 0x140) -+#define TMU_BMU_BUF_SIZE (TMU_CSR_BASE_ADDR + 0x144) -+/* [31:0] PHY5 in queue address (must be initialized with one of the -+ * xxx_INQ_PKTPTR cbus addresses) -+ */ -+#define TMU_PHY5_INQ_ADDR (TMU_CSR_BASE_ADDR + 0x148) -+ -+#define SW_RESET BIT(0) /* Global software reset */ -+#define INQ_RESET BIT(2) -+#define TEQ_RESET BIT(3) -+#define TDQ_RESET BIT(4) -+#define PE_RESET BIT(5) -+#define MEM_INIT BIT(6) -+#define MEM_INIT_DONE BIT(7) -+#define LLM_INIT BIT(8) -+#define LLM_INIT_DONE BIT(9) -+#define ECC_MEM_INIT_DONE BIT(10) -+ -+struct tmu_cfg { -+ u32 pe_sys_clk_ratio; -+ unsigned long llm_base_addr; -+ u32 llm_queue_len; -+}; -+ -+/* Not HW related for pfe_ctrl / pfe common defines */ -+#define DEFAULT_MAX_QDEPTH 80 -+#define DEFAULT_Q0_QDEPTH 511 /*We keep one large queue for host tx qos */ -+#define DEFAULT_TMU3_QDEPTH 127 -+ -+#endif /* _TMU_CSR_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/cbus/util_csr.h -@@ -0,0 +1,61 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _UTIL_CSR_H_ -+#define _UTIL_CSR_H_ -+ -+#define UTIL_VERSION (UTIL_CSR_BASE_ADDR + 0x000) -+#define UTIL_TX_CTRL (UTIL_CSR_BASE_ADDR + 0x004) -+#define UTIL_INQ_PKTPTR (UTIL_CSR_BASE_ADDR + 0x010) -+ -+#define UTIL_HDR_SIZE (UTIL_CSR_BASE_ADDR + 0x014) -+ -+#define UTIL_PE0_QB_DM_ADDR0 (UTIL_CSR_BASE_ADDR + 0x020) -+#define UTIL_PE0_QB_DM_ADDR1 (UTIL_CSR_BASE_ADDR + 0x024) -+#define UTIL_PE0_RO_DM_ADDR0 (UTIL_CSR_BASE_ADDR + 0x060) -+#define UTIL_PE0_RO_DM_ADDR1 (UTIL_CSR_BASE_ADDR + 0x064) -+ -+#define UTIL_MEM_ACCESS_ADDR (UTIL_CSR_BASE_ADDR + 0x100) -+#define UTIL_MEM_ACCESS_WDATA (UTIL_CSR_BASE_ADDR + 0x104) -+#define UTIL_MEM_ACCESS_RDATA (UTIL_CSR_BASE_ADDR + 0x108) -+ -+#define UTIL_TM_INQ_ADDR (UTIL_CSR_BASE_ADDR + 0x114) -+#define UTIL_PE_STATUS (UTIL_CSR_BASE_ADDR + 0x118) -+ -+#define UTIL_PE_SYS_CLK_RATIO (UTIL_CSR_BASE_ADDR + 0x200) -+#define UTIL_AFULL_THRES (UTIL_CSR_BASE_ADDR + 0x204) -+#define UTIL_GAP_BETWEEN_READS (UTIL_CSR_BASE_ADDR + 0x208) -+#define UTIL_MAX_BUF_CNT (UTIL_CSR_BASE_ADDR + 0x20c) -+#define UTIL_TSQ_FIFO_THRES (UTIL_CSR_BASE_ADDR + 0x210) -+#define UTIL_TSQ_MAX_CNT (UTIL_CSR_BASE_ADDR + 0x214) -+#define UTIL_IRAM_DATA_0 (UTIL_CSR_BASE_ADDR + 0x218) -+#define UTIL_IRAM_DATA_1 (UTIL_CSR_BASE_ADDR + 0x21c) -+#define UTIL_IRAM_DATA_2 (UTIL_CSR_BASE_ADDR + 0x220) -+#define UTIL_IRAM_DATA_3 (UTIL_CSR_BASE_ADDR + 0x224) -+ -+#define UTIL_BUS_ACCESS_ADDR (UTIL_CSR_BASE_ADDR + 0x228) -+#define UTIL_BUS_ACCESS_WDATA (UTIL_CSR_BASE_ADDR + 0x22c) -+#define UTIL_BUS_ACCESS_RDATA (UTIL_CSR_BASE_ADDR + 0x230) -+ -+#define UTIL_INQ_AFULL_THRES (UTIL_CSR_BASE_ADDR + 0x234) -+ -+struct util_cfg { -+ u32 pe_sys_clk_ratio; -+}; -+ -+#endif /* _UTIL_CSR_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/include/pfe/pfe.h -@@ -0,0 +1,372 @@ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program. If not, see <http://www.gnu.org/licenses/>. -+ */ -+ -+#ifndef _PFE_H_ -+#define _PFE_H_ -+ -+#include "cbus.h" -+ -+#define CLASS_DMEM_BASE_ADDR(i) (0x00000000 | ((i) << 20)) -+/* -+ * Only valid for mem access register interface -+ */ -+#define CLASS_IMEM_BASE_ADDR(i) (0x00000000 | ((i) << 20)) -+#define CLASS_DMEM_SIZE 0x00002000 -+#define CLASS_IMEM_SIZE 0x00008000 -+ -+#define TMU_DMEM_BASE_ADDR(i) (0x00000000 + ((i) << 20)) -+/* -+ * Only valid for mem access register interface -+ */ -+#define TMU_IMEM_BASE_ADDR(i) (0x00000000 + ((i) << 20)) -+#define TMU_DMEM_SIZE 0x00000800 -+#define TMU_IMEM_SIZE 0x00002000 -+ -+#define UTIL_DMEM_BASE_ADDR 0x00000000 -+#define UTIL_DMEM_SIZE 0x00002000 -+ -+#define PE_LMEM_BASE_ADDR 0xc3010000 -+#define PE_LMEM_SIZE 0x8000 -+#define PE_LMEM_END (PE_LMEM_BASE_ADDR + PE_LMEM_SIZE) -+ -+#define DMEM_BASE_ADDR 0x00000000 -+#define DMEM_SIZE 0x2000 /* TMU has less... */ -+#define DMEM_END (DMEM_BASE_ADDR + DMEM_SIZE) -+ -+#define PMEM_BASE_ADDR 0x00010000 -+#define PMEM_SIZE 0x8000 /* TMU has less... */ -+#define PMEM_END (PMEM_BASE_ADDR + PMEM_SIZE) -+ -+/* These check memory ranges from PE point of view/memory map */ -+#define IS_DMEM(addr, len) \ -+ ({ typeof(addr) addr_ = (addr); \ -+ ((unsigned long)(addr_) >= DMEM_BASE_ADDR) && \ -+ (((unsigned long)(addr_) + (len)) <= DMEM_END); }) -+ -+#define IS_PMEM(addr, len) \ -+ ({ typeof(addr) addr_ = (addr); \ -+ ((unsigned long)(addr_) >= PMEM_BASE_ADDR) && \ -+ (((unsigned long)(addr_) + (len)) <= PMEM_END); }) -+ -+#define IS_PE_LMEM(addr, len) \ -+ ({ typeof(addr) addr_ = (addr); \ -+ ((unsigned long)(addr_) >= \ -+ PE_LMEM_BASE_ADDR) && \ -+ (((unsigned long)(addr_) + \ -+ (len)) <= PE_LMEM_END); }) -+ -+#define IS_PFE_LMEM(addr, len) \ -+ ({ typeof(addr) addr_ = (addr); \ -+ ((unsigned long)(addr_) >= \ -+ CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR)) && \ -+ (((unsigned long)(addr_) + (len)) <= \ -+ CBUS_VIRT_TO_PFE(LMEM_END)); }) -+ -+#define __IS_PHYS_DDR(addr, len) \ -+ ({ typeof(addr) addr_ = (addr); \ -+ ((unsigned long)(addr_) >= \ -+ DDR_PHYS_BASE_ADDR) && \ -+ (((unsigned long)(addr_) + (len)) <= \ -+ DDR_PHYS_END); }) -+ -+#define IS_PHYS_DDR(addr, len) __IS_PHYS_DDR(DDR_PFE_TO_PHYS(addr), len) -+ -+/* -+ * If using a run-time virtual address for the cbus base address use this code -+ */ -+extern void *cbus_base_addr; -+extern void *ddr_base_addr; -+extern unsigned long ddr_phys_base_addr; -+extern unsigned int ddr_size; -+ -+#define CBUS_BASE_ADDR cbus_base_addr -+#define DDR_PHYS_BASE_ADDR ddr_phys_base_addr -+#define DDR_BASE_ADDR ddr_base_addr -+#define DDR_SIZE ddr_size -+ -+#define DDR_PHYS_END (DDR_PHYS_BASE_ADDR + DDR_SIZE) -+ -+#define LS1012A_PFE_RESET_WA /* -+ * PFE doesn't have global reset and re-init -+ * should takecare few things to make PFE -+ * functional after reset -+ */ -+#define PFE_CBUS_PHYS_BASE_ADDR 0xc0000000 /* CBUS physical base address -+ * as seen by PE's. -+ */ -+/* CBUS physical base address as seen by PE's. */ -+#define PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE 0xc0000000 -+ -+#define DDR_PHYS_TO_PFE(p) (((unsigned long int)(p)) & 0x7FFFFFFF) -+#define DDR_PFE_TO_PHYS(p) (((unsigned long int)(p)) | 0x80000000) -+#define CBUS_PHYS_TO_PFE(p) (((p) - PFE_CBUS_PHYS_BASE_ADDR) + \ -+ PFE_CBUS_PHYS_BASE_ADDR_FROM_PFE) -+/* Translates to PFE address map */ -+ -+#define DDR_PHYS_TO_VIRT(p) (((p) - DDR_PHYS_BASE_ADDR) + DDR_BASE_ADDR) -+#define DDR_VIRT_TO_PHYS(v) (((v) - DDR_BASE_ADDR) + DDR_PHYS_BASE_ADDR) -+#define DDR_VIRT_TO_PFE(p) (DDR_PHYS_TO_PFE(DDR_VIRT_TO_PHYS(p))) -+ -+#define CBUS_VIRT_TO_PFE(v) (((v) - CBUS_BASE_ADDR) + \ -+ PFE_CBUS_PHYS_BASE_ADDR) -+#define CBUS_PFE_TO_VIRT(p) (((unsigned long int)(p) - \ -+ PFE_CBUS_PHYS_BASE_ADDR) + CBUS_BASE_ADDR) -+ -+/* The below part of the code is used in QOS control driver from host */ -+#define TMU_APB_BASE_ADDR 0xc1000000 /* TMU base address seen by -+ * pe's -+ */ -+ -+enum { -+ CLASS0_ID = 0, -+ CLASS1_ID, -+ CLASS2_ID, -+ CLASS3_ID, -+ CLASS4_ID, -+ CLASS5_ID, -+ TMU0_ID, -+ TMU1_ID, -+ TMU2_ID, -+ TMU3_ID, -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ UTIL_ID, -+#endif -+ MAX_PE -+}; -+ -+#define CLASS_MASK (BIT(CLASS0_ID) | BIT(CLASS1_ID) |\ -+ BIT(CLASS2_ID) | BIT(CLASS3_ID) |\ -+ BIT(CLASS4_ID) | BIT(CLASS5_ID)) -+#define CLASS_MAX_ID CLASS5_ID -+ -+#define TMU_MASK (BIT(TMU0_ID) | BIT(TMU1_ID) |\ -+ BIT(TMU3_ID)) -+ -+#define TMU_MAX_ID TMU3_ID -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+#define UTIL_MASK BIT(UTIL_ID) -+#endif -+ -+struct pe_status { -+ u32 cpu_state; -+ u32 activity_counter; -+ u32 rx; -+ union { -+ u32 tx; -+ u32 tmu_qstatus; -+ }; -+ u32 drop; -+#if defined(CFG_PE_DEBUG) -+ u32 debug_indicator; -+ u32 debug[16]; -+#endif -+} __aligned(16); -+ -+struct pe_sync_mailbox { -+ u32 stop; -+ u32 stopped; -+}; -+ -+/* Drop counter definitions */ -+ -+#define CLASS_NUM_DROP_COUNTERS 13 -+#define UTIL_NUM_DROP_COUNTERS 8 -+ -+/* PE information. -+ * Structure containing PE's specific information. It is used to create -+ * generic C functions common to all PE's. -+ * Before using the library functions this structure needs to be initialized -+ * with the different registers virtual addresses -+ * (according to the ARM MMU mmaping). The default initialization supports a -+ * virtual == physical mapping. -+ */ -+struct pe_info { -+ u32 dmem_base_addr; /* PE's dmem base address */ -+ u32 pmem_base_addr; /* PE's pmem base address */ -+ u32 pmem_size; /* PE's pmem size */ -+ -+ void *mem_access_wdata; /* PE's _MEM_ACCESS_WDATA register -+ * address -+ */ -+ void *mem_access_addr; /* PE's _MEM_ACCESS_ADDR register -+ * address -+ */ -+ void *mem_access_rdata; /* PE's _MEM_ACCESS_RDATA register -+ * address -+ */ -+}; -+ -+void pe_lmem_read(u32 *dst, u32 len, u32 offset); -+void pe_lmem_write(u32 *src, u32 len, u32 offset); -+ -+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len); -+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len); -+ -+u32 pe_pmem_read(int id, u32 addr, u8 size); -+ -+void pe_dmem_write(int id, u32 val, u32 addr, u8 size); -+u32 pe_dmem_read(int id, u32 addr, u8 size); -+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len); -+void class_pe_lmem_memset(u32 dst, int val, unsigned int len); -+void class_bus_write(u32 val, u32 addr, u8 size); -+u32 class_bus_read(u32 addr, u8 size); -+ -+#define class_bus_readl(addr) class_bus_read(addr, 4) -+#define class_bus_readw(addr) class_bus_read(addr, 2) -+#define class_bus_readb(addr) class_bus_read(addr, 1) -+ -+#define class_bus_writel(val, addr) class_bus_write(val, addr, 4) -+#define class_bus_writew(val, addr) class_bus_write(val, addr, 2) -+#define class_bus_writeb(val, addr) class_bus_write(val, addr, 1) -+ -+#define pe_dmem_readl(id, addr) pe_dmem_read(id, addr, 4) -+#define pe_dmem_readw(id, addr) pe_dmem_read(id, addr, 2) -+#define pe_dmem_readb(id, addr) pe_dmem_read(id, addr, 1) -+ -+#define pe_dmem_writel(id, val, addr) pe_dmem_write(id, val, addr, 4) -+#define pe_dmem_writew(id, val, addr) pe_dmem_write(id, val, addr, 2) -+#define pe_dmem_writeb(id, val, addr) pe_dmem_write(id, val, addr, 1) -+ -+/*int pe_load_elf_section(int id, const void *data, elf32_shdr *shdr); */ -+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr, -+ struct device *dev); -+ -+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base, -+ unsigned int ddr_size); -+void bmu_init(void *base, struct BMU_CFG *cfg); -+void bmu_reset(void *base); -+void bmu_enable(void *base); -+void bmu_disable(void *base); -+void bmu_set_config(void *base, struct BMU_CFG *cfg); -+ -+/* -+ * An enumerated type for loopback values. This can be one of three values, no -+ * loopback -normal operation, local loopback with internal loopback module of -+ * MAC or PHY loopback which is through the external PHY. -+ */ -+#ifndef __MAC_LOOP_ENUM__ -+#define __MAC_LOOP_ENUM__ -+enum mac_loop {LB_NONE, LB_EXT, LB_LOCAL}; -+#endif -+ -+void gemac_init(void *base, void *config); -+void gemac_disable_rx_checksum_offload(void *base); -+void gemac_enable_rx_checksum_offload(void *base); -+void gemac_set_speed(void *base, enum mac_speed gem_speed); -+void gemac_set_duplex(void *base, int duplex); -+void gemac_set_mode(void *base, int mode); -+void gemac_enable(void *base); -+void gemac_tx_disable(void *base); -+void gemac_tx_enable(void *base); -+void gemac_disable(void *base); -+void gemac_reset(void *base); -+void gemac_set_address(void *base, struct spec_addr *addr); -+struct spec_addr gemac_get_address(void *base); -+void gemac_set_loop(void *base, enum mac_loop gem_loop); -+void gemac_set_laddr1(void *base, struct pfe_mac_addr *address); -+void gemac_set_laddr2(void *base, struct pfe_mac_addr *address); -+void gemac_set_laddr3(void *base, struct pfe_mac_addr *address); -+void gemac_set_laddr4(void *base, struct pfe_mac_addr *address); -+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address, -+ unsigned int entry_index); -+void gemac_clear_laddr1(void *base); -+void gemac_clear_laddr2(void *base); -+void gemac_clear_laddr3(void *base); -+void gemac_clear_laddr4(void *base); -+void gemac_clear_laddrN(void *base, unsigned int entry_index); -+struct pfe_mac_addr gemac_get_hash(void *base); -+void gemac_set_hash(void *base, struct pfe_mac_addr *hash); -+struct pfe_mac_addr gem_get_laddr1(void *base); -+struct pfe_mac_addr gem_get_laddr2(void *base); -+struct pfe_mac_addr gem_get_laddr3(void *base); -+struct pfe_mac_addr gem_get_laddr4(void *base); -+struct pfe_mac_addr gem_get_laddrN(void *base, unsigned int entry_index); -+void gemac_set_config(void *base, struct gemac_cfg *cfg); -+void gemac_allow_broadcast(void *base); -+void gemac_no_broadcast(void *base); -+void gemac_enable_1536_rx(void *base); -+void gemac_disable_1536_rx(void *base); -+void gemac_set_rx_max_fl(void *base, int mtu); -+void gemac_enable_rx_jmb(void *base); -+void gemac_disable_rx_jmb(void *base); -+void gemac_enable_stacked_vlan(void *base); -+void gemac_disable_stacked_vlan(void *base); -+void gemac_enable_pause_rx(void *base); -+void gemac_disable_pause_rx(void *base); -+void gemac_enable_copy_all(void *base); -+void gemac_disable_copy_all(void *base); -+void gemac_set_bus_width(void *base, int width); -+void gemac_set_wol(void *base, u32 wol_conf); -+ -+void gpi_init(void *base, struct gpi_cfg *cfg); -+void gpi_reset(void *base); -+void gpi_enable(void *base); -+void gpi_disable(void *base); -+void gpi_set_config(void *base, struct gpi_cfg *cfg); -+ -+void class_init(struct class_cfg *cfg); -+void class_reset(void); -+void class_enable(void); -+void class_disable(void); -+void class_set_config(struct class_cfg *cfg); -+ -+void tmu_reset(void); -+void tmu_init(struct tmu_cfg *cfg); -+void tmu_enable(u32 pe_mask); -+void tmu_disable(u32 pe_mask); -+u32 tmu_qstatus(u32 if_id); -+u32 tmu_pkts_processed(u32 if_id); -+ -+void util_init(struct util_cfg *cfg); -+void util_reset(void); -+void util_enable(void); -+void util_disable(void); -+ -+void hif_init(void); -+void hif_tx_enable(void); -+void hif_tx_disable(void); -+void hif_rx_enable(void); -+void hif_rx_disable(void); -+ -+/* Get Chip Revision level -+ * -+ */ -+static inline unsigned int CHIP_REVISION(void) -+{ -+ /*For LS1012A return always 1 */ -+ return 1; -+} -+ -+/* Start HIF rx DMA -+ * -+ */ -+static inline void hif_rx_dma_start(void) -+{ -+ writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_RX_CTRL); -+} -+ -+/* Start HIF tx DMA -+ * -+ */ -+static inline void hif_tx_dma_start(void) -+{ -+ writel(HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB, HIF_TX_CTRL); -+} -+ -+#endif /* _PFE_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_cdev.c -@@ -0,0 +1,258 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2018 NXP -+ */ -+ -+/* @pfe_cdev.c. -+ * Dummy device representing the PFE US in userspace. -+ * - used for interacting with the kernel layer for link status -+ */ -+ -+#include <linux/eventfd.h> -+#include <linux/irqreturn.h> -+#include <linux/io.h> -+#include <asm/irq.h> -+ -+#include "pfe_cdev.h" -+#include "pfe_mod.h" -+ -+static int pfe_majno; -+static struct class *pfe_char_class; -+static struct device *pfe_char_dev; -+struct eventfd_ctx *g_trigger; -+ -+struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT]; -+ -+static int pfe_cdev_open(struct inode *inp, struct file *fp) -+{ -+ pr_debug("PFE CDEV device opened.\n"); -+ return 0; -+} -+ -+static ssize_t pfe_cdev_read(struct file *fp, char *buf, -+ size_t len, loff_t *off) -+{ -+ int ret = 0; -+ -+ pr_info("PFE CDEV attempt copying (%lu) size of user.\n", -+ sizeof(link_states)); -+ -+ pr_debug("Dump link_state on screen before copy_to_user\n"); -+ for (; ret < PFE_CDEV_ETH_COUNT; ret++) { -+ pr_debug("%u %u", link_states[ret].phy_id, -+ link_states[ret].state); -+ pr_debug("\n"); -+ } -+ -+ /* Copy to user the value in buffer sized len */ -+ ret = copy_to_user(buf, &link_states, sizeof(link_states)); -+ if (ret != 0) { -+ pr_err("Failed to send (%d)bytes of (%lu) requested.\n", -+ ret, len); -+ return -EFAULT; -+ } -+ -+ /* offset set back to 0 as there is contextual reading offset */ -+ *off = 0; -+ pr_debug("Read of (%lu) bytes performed.\n", sizeof(link_states)); -+ -+ return sizeof(link_states); -+} -+ -+/** -+ * This function is for getting some commands from user through non-IOCTL -+ * channel. It can used to configure the device. -+ * TODO: To be filled in future, if require duplex communication with user -+ * space. -+ */ -+static ssize_t pfe_cdev_write(struct file *fp, const char *buf, -+ size_t len, loff_t *off) -+{ -+ pr_info("PFE CDEV Write operation not supported!\n"); -+ -+ return -EFAULT; -+} -+ -+static int pfe_cdev_release(struct inode *inp, struct file *fp) -+{ -+ if (g_trigger) { -+ free_irq(pfe->hif_irq, g_trigger); -+ eventfd_ctx_put(g_trigger); -+ g_trigger = NULL; -+ } -+ -+ pr_info("PFE_CDEV: Device successfully closed\n"); -+ return 0; -+} -+ -+/* -+ * hif_us_isr- -+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block -+ */ -+static irqreturn_t hif_us_isr(int irq, void *arg) -+{ -+ struct eventfd_ctx *trigger = (struct eventfd_ctx *)arg; -+ int int_status; -+ int int_enable_mask; -+ -+ /*Read hif interrupt source register */ -+ int_status = readl_relaxed(HIF_INT_SRC); -+ int_enable_mask = readl_relaxed(HIF_INT_ENABLE); -+ -+ if ((int_status & HIF_INT) == 0) -+ return IRQ_NONE; -+ -+ if (int_status & HIF_RXPKT_INT) { -+ int_enable_mask &= ~(HIF_RXPKT_INT); -+ /* Disable interrupts, they will be enabled after -+ * they are serviced -+ */ -+ writel_relaxed(int_enable_mask, HIF_INT_ENABLE); -+ -+ eventfd_signal(trigger, 1); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+#define PFE_INTR_COAL_USECS 100 -+static long pfe_cdev_ioctl(struct file *fp, unsigned int cmd, -+ unsigned long arg) -+{ -+ int ret = -EFAULT; -+ int __user *argp = (int __user *)arg; -+ -+ pr_debug("PFE CDEV IOCTL Called with cmd=(%u)\n", cmd); -+ -+ switch (cmd) { -+ case PFE_CDEV_ETH0_STATE_GET: -+ /* Return an unsigned int (link state) for ETH0 */ -+ *argp = link_states[0].state; -+ pr_debug("Returning state=%d for ETH0\n", *argp); -+ ret = 0; -+ break; -+ case PFE_CDEV_ETH1_STATE_GET: -+ /* Return an unsigned int (link state) for ETH0 */ -+ *argp = link_states[1].state; -+ pr_debug("Returning state=%d for ETH1\n", *argp); -+ ret = 0; -+ break; -+ case PFE_CDEV_HIF_INTR_EN: -+ /* Return success/failure */ -+ g_trigger = eventfd_ctx_fdget(*argp); -+ if (IS_ERR(g_trigger)) -+ return PTR_ERR(g_trigger); -+ ret = request_irq(pfe->hif_irq, hif_us_isr, 0, "pfe_hif", -+ g_trigger); -+ if (ret) { -+ pr_err("%s: failed to get the hif IRQ = %d\n", -+ __func__, pfe->hif_irq); -+ eventfd_ctx_put(g_trigger); -+ g_trigger = NULL; -+ } -+ writel((PFE_INTR_COAL_USECS * (pfe->ctrl.sys_clk / 1000)) | -+ HIF_INT_COAL_ENABLE, HIF_INT_COAL); -+ -+ pr_debug("request_irq for hif interrupt: %d\n", pfe->hif_irq); -+ ret = 0; -+ break; -+ default: -+ pr_info("Unsupport cmd (%d) for PFE CDEV.\n", cmd); -+ break; -+ }; -+ -+ return ret; -+} -+ -+static unsigned int pfe_cdev_poll(struct file *fp, -+ struct poll_table_struct *wait) -+{ -+ pr_info("PFE CDEV poll method not supported\n"); -+ return 0; -+} -+ -+static const struct file_operations pfe_cdev_fops = { -+ .open = pfe_cdev_open, -+ .read = pfe_cdev_read, -+ .write = pfe_cdev_write, -+ .release = pfe_cdev_release, -+ .unlocked_ioctl = pfe_cdev_ioctl, -+ .poll = pfe_cdev_poll, -+}; -+ -+int pfe_cdev_init(void) -+{ -+ int ret; -+ -+ pr_debug("PFE CDEV initialization begin\n"); -+ -+ /* Register the major number for the device */ -+ pfe_majno = register_chrdev(0, PFE_CDEV_NAME, &pfe_cdev_fops); -+ if (pfe_majno < 0) { -+ pr_err("Unable to register PFE CDEV. PFE CDEV not available\n"); -+ ret = pfe_majno; -+ goto cleanup; -+ } -+ -+ pr_debug("PFE CDEV assigned major number: %d\n", pfe_majno); -+ -+ /* Register the class for the device */ -+ pfe_char_class = class_create(THIS_MODULE, PFE_CLASS_NAME); -+ if (IS_ERR(pfe_char_class)) { -+ pr_err( -+ "Failed to init class for PFE CDEV. PFE CDEV not available.\n"); -+ ret = PTR_ERR(pfe_char_class); -+ goto cleanup; -+ } -+ -+ pr_debug("PFE CDEV Class created successfully.\n"); -+ -+ /* Create the device without any parent and without any callback data */ -+ pfe_char_dev = device_create(pfe_char_class, NULL, -+ MKDEV(pfe_majno, 0), NULL, -+ PFE_CDEV_NAME); -+ if (IS_ERR(pfe_char_dev)) { -+ pr_err("Unable to PFE CDEV device. PFE CDEV not available.\n"); -+ ret = PTR_ERR(pfe_char_dev); -+ goto cleanup; -+ } -+ -+ /* Information structure being shared with the userspace */ -+ memset(link_states, 0, sizeof(struct pfe_shared_info) * -+ PFE_CDEV_ETH_COUNT); -+ -+ pr_info("PFE CDEV created: %s\n", PFE_CDEV_NAME); -+ -+ ret = 0; -+ return ret; -+ -+cleanup: -+ if (!IS_ERR(pfe_char_class)) -+ class_destroy(pfe_char_class); -+ -+ if (pfe_majno > 0) -+ unregister_chrdev(pfe_majno, PFE_CDEV_NAME); -+ -+ return ret; -+} -+ -+void pfe_cdev_exit(void) -+{ -+ if (!IS_ERR(pfe_char_dev)) -+ device_destroy(pfe_char_class, MKDEV(pfe_majno, 0)); -+ -+ if (!IS_ERR(pfe_char_class)) { -+ class_unregister(pfe_char_class); -+ class_destroy(pfe_char_class); -+ } -+ -+ if (pfe_majno > 0) -+ unregister_chrdev(pfe_majno, PFE_CDEV_NAME); -+ -+ /* reset the variables */ -+ pfe_majno = 0; -+ pfe_char_class = NULL; -+ pfe_char_dev = NULL; -+ -+ pr_info("PFE CDEV Removed.\n"); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_cdev.h -@@ -0,0 +1,41 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2018 NXP -+ */ -+ -+#ifndef _PFE_CDEV_H_ -+#define _PFE_CDEV_H_ -+ -+#include <linux/init.h> -+#include <linux/device.h> -+#include <linux/err.h> -+#include <linux/kernel.h> -+#include <linux/fs.h> -+#include <linux/uaccess.h> -+#include <linux/poll.h> -+ -+#define PFE_CDEV_NAME "pfe_us_cdev" -+#define PFE_CLASS_NAME "ppfe_us" -+ -+/* Extracted from ls1012a_pfe_platform_data, there are 3 interfaces which are -+ * supported by PFE driver. Should be updated if number of eth devices are -+ * changed. -+ */ -+#define PFE_CDEV_ETH_COUNT 3 -+ -+struct pfe_shared_info { -+ uint32_t phy_id; /* Link phy ID */ -+ uint8_t state; /* Has either 0 or 1 */ -+}; -+ -+extern struct pfe_shared_info link_states[PFE_CDEV_ETH_COUNT]; -+ -+/* IOCTL Commands */ -+#define PFE_CDEV_ETH0_STATE_GET _IOR('R', 0, int) -+#define PFE_CDEV_ETH1_STATE_GET _IOR('R', 1, int) -+#define PFE_CDEV_HIF_INTR_EN _IOWR('R', 2, int) -+ -+int pfe_cdev_init(void); -+void pfe_cdev_exit(void); -+ -+#endif /* _PFE_CDEV_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.c -@@ -0,0 +1,226 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/sched.h> -+#include <linux/module.h> -+#include <linux/list.h> -+#include <linux/kthread.h> -+ -+#include "pfe_mod.h" -+#include "pfe_ctrl.h" -+ -+#define TIMEOUT_MS 1000 -+ -+int relax(unsigned long end) -+{ -+ if (time_after(jiffies, end)) { -+ if (time_after(jiffies, end + (TIMEOUT_MS * HZ) / 1000)) -+ return -1; -+ -+ if (need_resched()) -+ schedule(); -+ } -+ -+ return 0; -+} -+ -+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl) -+{ -+ int id; -+ -+ mutex_lock(&ctrl->mutex); -+ -+ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) -+ pe_dmem_write(id, cpu_to_be32(0x1), CLASS_DM_RESUME, 4); -+ -+ for (id = TMU0_ID; id <= TMU_MAX_ID; id++) { -+ if (id == TMU2_ID) -+ continue; -+ pe_dmem_write(id, cpu_to_be32(0x1), TMU_DM_RESUME, 4); -+ } -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ pe_dmem_write(UTIL_ID, cpu_to_be32(0x1), UTIL_DM_RESUME, 4); -+#endif -+ mutex_unlock(&ctrl->mutex); -+} -+ -+void pfe_ctrl_resume(struct pfe_ctrl *ctrl) -+{ -+ int pe_mask = CLASS_MASK | TMU_MASK; -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ pe_mask |= UTIL_MASK; -+#endif -+ mutex_lock(&ctrl->mutex); -+ pe_start(&pfe->ctrl, pe_mask); -+ mutex_unlock(&ctrl->mutex); -+} -+ -+/* PE sync stop. -+ * Stops packet processing for a list of PE's (specified using a bitmask). -+ * The caller must hold ctrl->mutex. -+ * -+ * @param ctrl Control context -+ * @param pe_mask Mask of PE id's to stop -+ * -+ */ -+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask) -+{ -+ struct pe_sync_mailbox *mbox; -+ int pe_stopped = 0; -+ unsigned long end = jiffies + 2; -+ int i; -+ -+ pe_mask &= 0x2FF; /*Exclude Util + TMU2 */ -+ -+ for (i = 0; i < MAX_PE; i++) -+ if (pe_mask & (1 << i)) { -+ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; -+ -+ pe_dmem_write(i, cpu_to_be32(0x1), (unsigned -+ long)&mbox->stop, 4); -+ } -+ -+ while (pe_stopped != pe_mask) { -+ for (i = 0; i < MAX_PE; i++) -+ if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) { -+ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; -+ -+ if (pe_dmem_read(i, (unsigned -+ long)&mbox->stopped, 4) & -+ cpu_to_be32(0x1)) -+ pe_stopped |= (1 << i); -+ } -+ -+ if (relax(end) < 0) -+ goto err; -+ } -+ -+ return 0; -+ -+err: -+ pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped); -+ -+ for (i = 0; i < MAX_PE; i++) -+ if (pe_mask & (1 << i)) { -+ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; -+ -+ pe_dmem_write(i, cpu_to_be32(0x0), (unsigned -+ long)&mbox->stop, 4); -+ } -+ -+ return -EIO; -+} -+ -+/* PE start. -+ * Starts packet processing for a list of PE's (specified using a bitmask). -+ * The caller must hold ctrl->mutex. -+ * -+ * @param ctrl Control context -+ * @param pe_mask Mask of PE id's to start -+ * -+ */ -+void pe_start(struct pfe_ctrl *ctrl, int pe_mask) -+{ -+ struct pe_sync_mailbox *mbox; -+ int i; -+ -+ for (i = 0; i < MAX_PE; i++) -+ if (pe_mask & (1 << i)) { -+ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; -+ -+ pe_dmem_write(i, cpu_to_be32(0x0), (unsigned -+ long)&mbox->stop, 4); -+ } -+} -+ -+/* This function will ensure all PEs are put in to idle state */ -+int pe_reset_all(struct pfe_ctrl *ctrl) -+{ -+ struct pe_sync_mailbox *mbox; -+ int pe_stopped = 0; -+ unsigned long end = jiffies + 2; -+ int i; -+ int pe_mask = CLASS_MASK | TMU_MASK; -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ pe_mask |= UTIL_MASK; -+#endif -+ -+ for (i = 0; i < MAX_PE; i++) -+ if (pe_mask & (1 << i)) { -+ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; -+ -+ pe_dmem_write(i, cpu_to_be32(0x2), (unsigned -+ long)&mbox->stop, 4); -+ } -+ -+ while (pe_stopped != pe_mask) { -+ for (i = 0; i < MAX_PE; i++) -+ if ((pe_mask & (1 << i)) && !(pe_stopped & (1 << i))) { -+ mbox = (void *)ctrl->sync_mailbox_baseaddr[i]; -+ -+ if (pe_dmem_read(i, (unsigned long) -+ &mbox->stopped, 4) & -+ cpu_to_be32(0x1)) -+ pe_stopped |= (1 << i); -+ } -+ -+ if (relax(end) < 0) -+ goto err; -+ } -+ -+ return 0; -+ -+err: -+ pr_err("%s: timeout, %x %x\n", __func__, pe_mask, pe_stopped); -+ return -EIO; -+} -+ -+int pfe_ctrl_init(struct pfe *pfe) -+{ -+ struct pfe_ctrl *ctrl = &pfe->ctrl; -+ int id; -+ -+ pr_info("%s\n", __func__); -+ -+ mutex_init(&ctrl->mutex); -+ spin_lock_init(&ctrl->lock); -+ -+ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) { -+ ctrl->sync_mailbox_baseaddr[id] = CLASS_DM_SYNC_MBOX; -+ ctrl->msg_mailbox_baseaddr[id] = CLASS_DM_MSG_MBOX; -+ } -+ -+ for (id = TMU0_ID; id <= TMU_MAX_ID; id++) { -+ if (id == TMU2_ID) -+ continue; -+ ctrl->sync_mailbox_baseaddr[id] = TMU_DM_SYNC_MBOX; -+ ctrl->msg_mailbox_baseaddr[id] = TMU_DM_MSG_MBOX; -+ } -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ ctrl->sync_mailbox_baseaddr[UTIL_ID] = UTIL_DM_SYNC_MBOX; -+ ctrl->msg_mailbox_baseaddr[UTIL_ID] = UTIL_DM_MSG_MBOX; -+#endif -+ -+ ctrl->hash_array_baseaddr = pfe->ddr_baseaddr + ROUTE_TABLE_BASEADDR; -+ ctrl->hash_array_phys_baseaddr = pfe->ddr_phys_baseaddr + -+ ROUTE_TABLE_BASEADDR; -+ -+ ctrl->dev = pfe->dev; -+ -+ pr_info("%s finished\n", __func__); -+ -+ return 0; -+} -+ -+void pfe_ctrl_exit(struct pfe *pfe) -+{ -+ pr_info("%s\n", __func__); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_ctrl.h -@@ -0,0 +1,100 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_CTRL_H_ -+#define _PFE_CTRL_H_ -+ -+#include <linux/dmapool.h> -+ -+#include "pfe/pfe.h" -+ -+#define DMA_BUF_SIZE_128 0x80 /* enough for 1 conntracks */ -+#define DMA_BUF_SIZE_256 0x100 -+/* enough for 2 conntracks, 1 bridge entry or 1 multicast entry */ -+#define DMA_BUF_SIZE_512 0x200 -+/* 512bytes dma allocated buffers used by rtp relay feature */ -+#define DMA_BUF_MIN_ALIGNMENT 8 -+#define DMA_BUF_BOUNDARY (4 * 1024) -+/* bursts can not cross 4k boundary */ -+ -+#define CMD_TX_ENABLE 0x0501 -+#define CMD_TX_DISABLE 0x0502 -+ -+#define CMD_RX_LRO 0x0011 -+#define CMD_PKTCAP_ENABLE 0x0d01 -+#define CMD_QM_EXPT_RATE 0x020c -+ -+#define CLASS_DM_SH_STATIC (0x800) -+#define CLASS_DM_CPU_TICKS (CLASS_DM_SH_STATIC) -+#define CLASS_DM_SYNC_MBOX (0x808) -+#define CLASS_DM_MSG_MBOX (0x810) -+#define CLASS_DM_DROP_CNTR (0x820) -+#define CLASS_DM_RESUME (0x854) -+#define CLASS_DM_PESTATUS (0x860) -+#define CLASS_DM_CRC_VALIDATED (0x14b0) -+ -+#define TMU_DM_SH_STATIC (0x80) -+#define TMU_DM_CPU_TICKS (TMU_DM_SH_STATIC) -+#define TMU_DM_SYNC_MBOX (0x88) -+#define TMU_DM_MSG_MBOX (0x90) -+#define TMU_DM_RESUME (0xA0) -+#define TMU_DM_PESTATUS (0xB0) -+#define TMU_DM_CONTEXT (0x300) -+#define TMU_DM_TX_TRANS (0x480) -+ -+#define UTIL_DM_SH_STATIC (0x0) -+#define UTIL_DM_CPU_TICKS (UTIL_DM_SH_STATIC) -+#define UTIL_DM_SYNC_MBOX (0x8) -+#define UTIL_DM_MSG_MBOX (0x10) -+#define UTIL_DM_DROP_CNTR (0x20) -+#define UTIL_DM_RESUME (0x40) -+#define UTIL_DM_PESTATUS (0x50) -+ -+struct pfe_ctrl { -+ struct mutex mutex; /* to serialize pfe control access */ -+ spinlock_t lock; -+ -+ void *dma_pool; -+ void *dma_pool_512; -+ void *dma_pool_128; -+ -+ struct device *dev; -+ -+ void *hash_array_baseaddr; /* -+ * Virtual base address of -+ * the conntrack hash array -+ */ -+ unsigned long hash_array_phys_baseaddr; /* -+ * Physical base address of -+ * the conntrack hash array -+ */ -+ -+ int (*event_cb)(u16, u16, u16*); -+ -+ unsigned long sync_mailbox_baseaddr[MAX_PE]; /* -+ * Sync mailbox PFE -+ * internal address, -+ * initialized -+ * when parsing elf images -+ */ -+ unsigned long msg_mailbox_baseaddr[MAX_PE]; /* -+ * Msg mailbox PFE internal -+ * address, initialized -+ * when parsing elf images -+ */ -+ unsigned int sys_clk; /* AXI clock value, in KHz */ -+}; -+ -+int pfe_ctrl_init(struct pfe *pfe); -+void pfe_ctrl_exit(struct pfe *pfe); -+int pe_sync_stop(struct pfe_ctrl *ctrl, int pe_mask); -+void pe_start(struct pfe_ctrl *ctrl, int pe_mask); -+int pe_reset_all(struct pfe_ctrl *ctrl); -+void pfe_ctrl_suspend(struct pfe_ctrl *ctrl); -+void pfe_ctrl_resume(struct pfe_ctrl *ctrl); -+int relax(unsigned long end); -+ -+#endif /* _PFE_CTRL_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.c -@@ -0,0 +1,99 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include <linux/module.h> -+#include <linux/debugfs.h> -+#include <linux/platform_device.h> -+ -+#include "pfe_mod.h" -+ -+static int dmem_show(struct seq_file *s, void *unused) -+{ -+ u32 dmem_addr, val; -+ int id = (long int)s->private; -+ int i; -+ -+ for (dmem_addr = 0; dmem_addr < CLASS_DMEM_SIZE; dmem_addr += 8 * 4) { -+ seq_printf(s, "%04x:", dmem_addr); -+ -+ for (i = 0; i < 8; i++) { -+ val = pe_dmem_read(id, dmem_addr + i * 4, 4); -+ seq_printf(s, " %02x %02x %02x %02x", val & 0xff, -+ (val >> 8) & 0xff, (val >> 16) & 0xff, -+ (val >> 24) & 0xff); -+ } -+ -+ seq_puts(s, "\n"); -+ } -+ -+ return 0; -+} -+ -+static int dmem_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, dmem_show, inode->i_private); -+} -+ -+static const struct file_operations dmem_fops = { -+ .open = dmem_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+int pfe_debugfs_init(struct pfe *pfe) -+{ -+ struct dentry *d; -+ -+ pr_info("%s\n", __func__); -+ -+ pfe->dentry = debugfs_create_dir("pfe", NULL); -+ if (IS_ERR_OR_NULL(pfe->dentry)) -+ goto err_dir; -+ -+ d = debugfs_create_file("pe0_dmem", 0444, pfe->dentry, (void *)0, -+ &dmem_fops); -+ if (IS_ERR_OR_NULL(d)) -+ goto err_pe; -+ -+ d = debugfs_create_file("pe1_dmem", 0444, pfe->dentry, (void *)1, -+ &dmem_fops); -+ if (IS_ERR_OR_NULL(d)) -+ goto err_pe; -+ -+ d = debugfs_create_file("pe2_dmem", 0444, pfe->dentry, (void *)2, -+ &dmem_fops); -+ if (IS_ERR_OR_NULL(d)) -+ goto err_pe; -+ -+ d = debugfs_create_file("pe3_dmem", 0444, pfe->dentry, (void *)3, -+ &dmem_fops); -+ if (IS_ERR_OR_NULL(d)) -+ goto err_pe; -+ -+ d = debugfs_create_file("pe4_dmem", 0444, pfe->dentry, (void *)4, -+ &dmem_fops); -+ if (IS_ERR_OR_NULL(d)) -+ goto err_pe; -+ -+ d = debugfs_create_file("pe5_dmem", 0444, pfe->dentry, (void *)5, -+ &dmem_fops); -+ if (IS_ERR_OR_NULL(d)) -+ goto err_pe; -+ -+ return 0; -+ -+err_pe: -+ debugfs_remove_recursive(pfe->dentry); -+ -+err_dir: -+ return -1; -+} -+ -+void pfe_debugfs_exit(struct pfe *pfe) -+{ -+ debugfs_remove_recursive(pfe->dentry); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_debugfs.h -@@ -0,0 +1,13 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_DEBUGFS_H_ -+#define _PFE_DEBUGFS_H_ -+ -+int pfe_debugfs_init(struct pfe *pfe); -+void pfe_debugfs_exit(struct pfe *pfe); -+ -+#endif /* _PFE_DEBUGFS_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_eth.c -@@ -0,0 +1,2587 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+/* @pfe_eth.c. -+ * Ethernet driver for to handle exception path for PFE. -+ * - uses HIF functions to send/receive packets. -+ * - uses ctrl function to start/stop interfaces. -+ * - uses direct register accesses to control phy operation. -+ */ -+#include <linux/version.h> -+#include <linux/kernel.h> -+#include <linux/interrupt.h> -+#include <linux/dma-mapping.h> -+#include <linux/dmapool.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/ethtool.h> -+#include <linux/mii.h> -+#include <linux/phy.h> -+#include <linux/timer.h> -+#include <linux/hrtimer.h> -+#include <linux/platform_device.h> -+ -+#include <net/ip.h> -+#include <net/sock.h> -+ -+#include <linux/of.h> -+#include <linux/of_mdio.h> -+ -+#include <linux/io.h> -+#include <asm/irq.h> -+#include <linux/delay.h> -+#include <linux/regmap.h> -+#include <linux/i2c.h> -+#include <linux/sys_soc.h> -+ -+#if defined(CONFIG_NF_CONNTRACK_MARK) -+#include <net/netfilter/nf_conntrack.h> -+#endif -+ -+#include "pfe_mod.h" -+#include "pfe_eth.h" -+#include "pfe_cdev.h" -+ -+#define LS1012A_REV_1_0 0x87040010 -+ -+bool pfe_use_old_dts_phy; -+bool pfe_errata_a010897; -+ -+static void *cbus_emac_base[3]; -+static void *cbus_gpi_base[3]; -+ -+/* Forward Declaration */ -+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv); -+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv); -+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int -+ from_tx, int n_desc); -+ -+/* MDIO registers */ -+#define MDIO_SGMII_CR 0x00 -+#define MDIO_SGMII_SR 0x01 -+#define MDIO_SGMII_DEV_ABIL_SGMII 0x04 -+#define MDIO_SGMII_LINK_TMR_L 0x12 -+#define MDIO_SGMII_LINK_TMR_H 0x13 -+#define MDIO_SGMII_IF_MODE 0x14 -+ -+/* SGMII Control defines */ -+#define SGMII_CR_RST 0x8000 -+#define SGMII_CR_AN_EN 0x1000 -+#define SGMII_CR_RESTART_AN 0x0200 -+#define SGMII_CR_FD 0x0100 -+#define SGMII_CR_SPEED_SEL1_1G 0x0040 -+#define SGMII_CR_DEF_VAL (SGMII_CR_AN_EN | SGMII_CR_FD | \ -+ SGMII_CR_SPEED_SEL1_1G) -+ -+/* SGMII IF Mode */ -+#define SGMII_DUPLEX_HALF 0x10 -+#define SGMII_SPEED_10MBPS 0x00 -+#define SGMII_SPEED_100MBPS 0x04 -+#define SGMII_SPEED_1GBPS 0x08 -+#define SGMII_USE_SGMII_AN 0x02 -+#define SGMII_EN 0x01 -+ -+/* SGMII Device Ability for SGMII */ -+#define SGMII_DEV_ABIL_ACK 0x4000 -+#define SGMII_DEV_ABIL_EEE_CLK_STP_EN 0x0100 -+#define SGMII_DEV_ABIL_SGMII 0x0001 -+ -+unsigned int gemac_regs[] = { -+ 0x0004, /* Interrupt event */ -+ 0x0008, /* Interrupt mask */ -+ 0x0024, /* Ethernet control */ -+ 0x0064, /* MIB Control/Status */ -+ 0x0084, /* Receive control/status */ -+ 0x00C4, /* Transmit control */ -+ 0x00E4, /* Physical address low */ -+ 0x00E8, /* Physical address high */ -+ 0x0144, /* Transmit FIFO Watermark and Store and Forward Control*/ -+ 0x0190, /* Receive FIFO Section Full Threshold */ -+ 0x01A0, /* Transmit FIFO Section Empty Threshold */ -+ 0x01B0, /* Frame Truncation Length */ -+}; -+ -+const struct soc_device_attribute ls1012a_rev1_soc_attr[] = { -+ { .family = "QorIQ LS1012A", -+ .soc_id = "svr:0x87040010", -+ .revision = "1.0", -+ .data = NULL }, -+ { }, -+}; -+ -+/********************************************************************/ -+/* SYSFS INTERFACE */ -+/********************************************************************/ -+ -+#ifdef PFE_ETH_NAPI_STATS -+/* -+ * pfe_eth_show_napi_stats -+ */ -+static ssize_t pfe_eth_show_napi_stats(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); -+ ssize_t len = 0; -+ -+ len += sprintf(buf + len, "sched: %u\n", -+ priv->napi_counters[NAPI_SCHED_COUNT]); -+ len += sprintf(buf + len, "poll: %u\n", -+ priv->napi_counters[NAPI_POLL_COUNT]); -+ len += sprintf(buf + len, "packet: %u\n", -+ priv->napi_counters[NAPI_PACKET_COUNT]); -+ len += sprintf(buf + len, "budget: %u\n", -+ priv->napi_counters[NAPI_FULL_BUDGET_COUNT]); -+ len += sprintf(buf + len, "desc: %u\n", -+ priv->napi_counters[NAPI_DESC_COUNT]); -+ -+ return len; -+} -+ -+/* -+ * pfe_eth_set_napi_stats -+ */ -+static ssize_t pfe_eth_set_napi_stats(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); -+ -+ memset(priv->napi_counters, 0, sizeof(priv->napi_counters)); -+ -+ return count; -+} -+#endif -+#ifdef PFE_ETH_TX_STATS -+/* pfe_eth_show_tx_stats -+ * -+ */ -+static ssize_t pfe_eth_show_tx_stats(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); -+ ssize_t len = 0; -+ int i; -+ -+ len += sprintf(buf + len, "TX queues stats:\n"); -+ -+ for (i = 0; i < emac_txq_cnt; i++) { -+ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev, -+ i); -+ -+ len += sprintf(buf + len, "\n"); -+ __netif_tx_lock_bh(tx_queue); -+ -+ hif_tx_lock(&pfe->hif); -+ len += sprintf(buf + len, -+ "Queue %2d : credits = %10d\n" -+ , i, hif_lib_tx_credit_avail(pfe, priv->id, i)); -+ len += sprintf(buf + len, -+ " tx packets = %10d\n" -+ , pfe->tmu_credit.tx_packets[priv->id][i]); -+ hif_tx_unlock(&pfe->hif); -+ -+ /* Don't output additionnal stats if queue never used */ -+ if (!pfe->tmu_credit.tx_packets[priv->id][i]) -+ goto skip; -+ -+ len += sprintf(buf + len, -+ " clean_fail = %10d\n" -+ , priv->clean_fail[i]); -+ len += sprintf(buf + len, -+ " stop_queue = %10d\n" -+ , priv->stop_queue_total[i]); -+ len += sprintf(buf + len, -+ " stop_queue_hif = %10d\n" -+ , priv->stop_queue_hif[i]); -+ len += sprintf(buf + len, -+ " stop_queue_hif_client = %10d\n" -+ , priv->stop_queue_hif_client[i]); -+ len += sprintf(buf + len, -+ " stop_queue_credit = %10d\n" -+ , priv->stop_queue_credit[i]); -+skip: -+ __netif_tx_unlock_bh(tx_queue); -+ } -+ return len; -+} -+ -+/* pfe_eth_set_tx_stats -+ * -+ */ -+static ssize_t pfe_eth_set_tx_stats(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); -+ int i; -+ -+ for (i = 0; i < emac_txq_cnt; i++) { -+ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev, -+ i); -+ -+ __netif_tx_lock_bh(tx_queue); -+ priv->clean_fail[i] = 0; -+ priv->stop_queue_total[i] = 0; -+ priv->stop_queue_hif[i] = 0; -+ priv->stop_queue_hif_client[i] = 0; -+ priv->stop_queue_credit[i] = 0; -+ __netif_tx_unlock_bh(tx_queue); -+ } -+ -+ return count; -+} -+#endif -+/* pfe_eth_show_txavail -+ * -+ */ -+static ssize_t pfe_eth_show_txavail(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); -+ ssize_t len = 0; -+ int i; -+ -+ for (i = 0; i < emac_txq_cnt; i++) { -+ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev, -+ i); -+ -+ __netif_tx_lock_bh(tx_queue); -+ -+ len += sprintf(buf + len, "%d", -+ hif_lib_tx_avail(&priv->client, i)); -+ -+ __netif_tx_unlock_bh(tx_queue); -+ -+ if (i == (emac_txq_cnt - 1)) -+ len += sprintf(buf + len, "\n"); -+ else -+ len += sprintf(buf + len, " "); -+ } -+ -+ return len; -+} -+ -+/* pfe_eth_show_default_priority -+ * -+ */ -+static ssize_t pfe_eth_show_default_priority(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); -+ unsigned long flags; -+ int rc; -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ rc = sprintf(buf, "%d\n", priv->default_priority); -+ spin_unlock_irqrestore(&priv->lock, flags); -+ -+ return rc; -+} -+ -+/* pfe_eth_set_default_priority -+ * -+ */ -+ -+static ssize_t pfe_eth_set_default_priority(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(to_net_dev(dev)); -+ unsigned long flags; -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ priv->default_priority = kstrtoul(buf, 0, 0); -+ spin_unlock_irqrestore(&priv->lock, flags); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(txavail, 0444, pfe_eth_show_txavail, NULL); -+static DEVICE_ATTR(default_priority, 0644, pfe_eth_show_default_priority, -+ pfe_eth_set_default_priority); -+ -+#ifdef PFE_ETH_NAPI_STATS -+static DEVICE_ATTR(napi_stats, 0644, pfe_eth_show_napi_stats, -+ pfe_eth_set_napi_stats); -+#endif -+ -+#ifdef PFE_ETH_TX_STATS -+static DEVICE_ATTR(tx_stats, 0644, pfe_eth_show_tx_stats, -+ pfe_eth_set_tx_stats); -+#endif -+ -+/* -+ * pfe_eth_sysfs_init -+ * -+ */ -+static int pfe_eth_sysfs_init(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ int err; -+ -+ /* Initialize the default values */ -+ -+ /* -+ * By default, packets without conntrack will use this default low -+ * priority queue -+ */ -+ priv->default_priority = 0; -+ -+ /* Create our sysfs files */ -+ err = device_create_file(&ndev->dev, &dev_attr_default_priority); -+ if (err) { -+ netdev_err(ndev, -+ "failed to create default_priority sysfs files\n"); -+ goto err_priority; -+ } -+ -+ err = device_create_file(&ndev->dev, &dev_attr_txavail); -+ if (err) { -+ netdev_err(ndev, -+ "failed to create default_priority sysfs files\n"); -+ goto err_txavail; -+ } -+ -+#ifdef PFE_ETH_NAPI_STATS -+ err = device_create_file(&ndev->dev, &dev_attr_napi_stats); -+ if (err) { -+ netdev_err(ndev, "failed to create napi stats sysfs files\n"); -+ goto err_napi; -+ } -+#endif -+ -+#ifdef PFE_ETH_TX_STATS -+ err = device_create_file(&ndev->dev, &dev_attr_tx_stats); -+ if (err) { -+ netdev_err(ndev, "failed to create tx stats sysfs files\n"); -+ goto err_tx; -+ } -+#endif -+ -+ return 0; -+ -+#ifdef PFE_ETH_TX_STATS -+err_tx: -+#endif -+#ifdef PFE_ETH_NAPI_STATS -+ device_remove_file(&ndev->dev, &dev_attr_napi_stats); -+ -+err_napi: -+#endif -+ device_remove_file(&ndev->dev, &dev_attr_txavail); -+ -+err_txavail: -+ device_remove_file(&ndev->dev, &dev_attr_default_priority); -+ -+err_priority: -+ return -1; -+} -+ -+/* pfe_eth_sysfs_exit -+ * -+ */ -+void pfe_eth_sysfs_exit(struct net_device *ndev) -+{ -+#ifdef PFE_ETH_TX_STATS -+ device_remove_file(&ndev->dev, &dev_attr_tx_stats); -+#endif -+ -+#ifdef PFE_ETH_NAPI_STATS -+ device_remove_file(&ndev->dev, &dev_attr_napi_stats); -+#endif -+ device_remove_file(&ndev->dev, &dev_attr_txavail); -+ device_remove_file(&ndev->dev, &dev_attr_default_priority); -+} -+ -+/*************************************************************************/ -+/* ETHTOOL INTERCAE */ -+/*************************************************************************/ -+ -+/*MTIP GEMAC */ -+static const struct fec_stat { -+ char name[ETH_GSTRING_LEN]; -+ u16 offset; -+} fec_stats[] = { -+ /* RMON TX */ -+ { "tx_dropped", RMON_T_DROP }, -+ { "tx_packets", RMON_T_PACKETS }, -+ { "tx_broadcast", RMON_T_BC_PKT }, -+ { "tx_multicast", RMON_T_MC_PKT }, -+ { "tx_crc_errors", RMON_T_CRC_ALIGN }, -+ { "tx_undersize", RMON_T_UNDERSIZE }, -+ { "tx_oversize", RMON_T_OVERSIZE }, -+ { "tx_fragment", RMON_T_FRAG }, -+ { "tx_jabber", RMON_T_JAB }, -+ { "tx_collision", RMON_T_COL }, -+ { "tx_64byte", RMON_T_P64 }, -+ { "tx_65to127byte", RMON_T_P65TO127 }, -+ { "tx_128to255byte", RMON_T_P128TO255 }, -+ { "tx_256to511byte", RMON_T_P256TO511 }, -+ { "tx_512to1023byte", RMON_T_P512TO1023 }, -+ { "tx_1024to2047byte", RMON_T_P1024TO2047 }, -+ { "tx_GTE2048byte", RMON_T_P_GTE2048 }, -+ { "tx_octets", RMON_T_OCTETS }, -+ -+ /* IEEE TX */ -+ { "IEEE_tx_drop", IEEE_T_DROP }, -+ { "IEEE_tx_frame_ok", IEEE_T_FRAME_OK }, -+ { "IEEE_tx_1col", IEEE_T_1COL }, -+ { "IEEE_tx_mcol", IEEE_T_MCOL }, -+ { "IEEE_tx_def", IEEE_T_DEF }, -+ { "IEEE_tx_lcol", IEEE_T_LCOL }, -+ { "IEEE_tx_excol", IEEE_T_EXCOL }, -+ { "IEEE_tx_macerr", IEEE_T_MACERR }, -+ { "IEEE_tx_cserr", IEEE_T_CSERR }, -+ { "IEEE_tx_sqe", IEEE_T_SQE }, -+ { "IEEE_tx_fdxfc", IEEE_T_FDXFC }, -+ { "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK }, -+ -+ /* RMON RX */ -+ { "rx_packets", RMON_R_PACKETS }, -+ { "rx_broadcast", RMON_R_BC_PKT }, -+ { "rx_multicast", RMON_R_MC_PKT }, -+ { "rx_crc_errors", RMON_R_CRC_ALIGN }, -+ { "rx_undersize", RMON_R_UNDERSIZE }, -+ { "rx_oversize", RMON_R_OVERSIZE }, -+ { "rx_fragment", RMON_R_FRAG }, -+ { "rx_jabber", RMON_R_JAB }, -+ { "rx_64byte", RMON_R_P64 }, -+ { "rx_65to127byte", RMON_R_P65TO127 }, -+ { "rx_128to255byte", RMON_R_P128TO255 }, -+ { "rx_256to511byte", RMON_R_P256TO511 }, -+ { "rx_512to1023byte", RMON_R_P512TO1023 }, -+ { "rx_1024to2047byte", RMON_R_P1024TO2047 }, -+ { "rx_GTE2048byte", RMON_R_P_GTE2048 }, -+ { "rx_octets", RMON_R_OCTETS }, -+ -+ /* IEEE RX */ -+ { "IEEE_rx_drop", IEEE_R_DROP }, -+ { "IEEE_rx_frame_ok", IEEE_R_FRAME_OK }, -+ { "IEEE_rx_crc", IEEE_R_CRC }, -+ { "IEEE_rx_align", IEEE_R_ALIGN }, -+ { "IEEE_rx_macerr", IEEE_R_MACERR }, -+ { "IEEE_rx_fdxfc", IEEE_R_FDXFC }, -+ { "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK }, -+}; -+ -+static void pfe_eth_fill_stats(struct net_device *ndev, struct ethtool_stats -+ *stats, u64 *data) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ int i; -+ u64 pfe_crc_validated = 0; -+ int id; -+ -+ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) { -+ pfe_crc_validated += be32_to_cpu(pe_dmem_read(id, -+ CLASS_DM_CRC_VALIDATED + (priv->id * 4), 4)); -+ } -+ -+ for (i = 0; i < ARRAY_SIZE(fec_stats); i++) { -+ data[i] = readl(priv->EMAC_baseaddr + fec_stats[i].offset); -+ -+ if (fec_stats[i].offset == IEEE_R_DROP) -+ data[i] -= pfe_crc_validated; -+ } -+} -+ -+static void pfe_eth_gstrings(struct net_device *netdev, -+ u32 stringset, u8 *data) -+{ -+ int i; -+ -+ switch (stringset) { -+ case ETH_SS_STATS: -+ for (i = 0; i < ARRAY_SIZE(fec_stats); i++) -+ memcpy(data + i * ETH_GSTRING_LEN, -+ fec_stats[i].name, ETH_GSTRING_LEN); -+ break; -+ } -+} -+ -+static int pfe_eth_stats_count(struct net_device *ndev, int sset) -+{ -+ switch (sset) { -+ case ETH_SS_STATS: -+ return ARRAY_SIZE(fec_stats); -+ default: -+ return -EOPNOTSUPP; -+ } -+} -+ -+/* -+ * pfe_eth_gemac_reglen - Return the length of the register structure. -+ * -+ */ -+static int pfe_eth_gemac_reglen(struct net_device *ndev) -+{ -+ pr_info("%s()\n", __func__); -+ return (sizeof(gemac_regs) / sizeof(u32)); -+} -+ -+/* -+ * pfe_eth_gemac_get_regs - Return the gemac register structure. -+ * -+ */ -+static void pfe_eth_gemac_get_regs(struct net_device *ndev, struct ethtool_regs -+ *regs, void *regbuf) -+{ -+ int i; -+ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ u32 *buf = (u32 *)regbuf; -+ -+ pr_info("%s()\n", __func__); -+ for (i = 0; i < sizeof(gemac_regs) / sizeof(u32); i++) -+ buf[i] = readl(priv->EMAC_baseaddr + gemac_regs[i]); -+} -+ -+/* -+ * pfe_eth_set_wol - Set the magic packet option, in WoL register. -+ * -+ */ -+static int pfe_eth_set_wol(struct net_device *ndev, struct ethtool_wolinfo *wol) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ if (wol->wolopts & ~WAKE_MAGIC) -+ return -EOPNOTSUPP; -+ -+ /* for MTIP we store wol->wolopts */ -+ priv->wol = wol->wolopts; -+ -+ device_set_wakeup_enable(&ndev->dev, wol->wolopts & WAKE_MAGIC); -+ -+ return 0; -+} -+ -+/* -+ * -+ * pfe_eth_get_wol - Get the WoL options. -+ * -+ */ -+static void pfe_eth_get_wol(struct net_device *ndev, struct ethtool_wolinfo -+ *wol) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ wol->supported = WAKE_MAGIC; -+ wol->wolopts = 0; -+ -+ if (priv->wol & WAKE_MAGIC) -+ wol->wolopts = WAKE_MAGIC; -+ -+ memset(&wol->sopass, 0, sizeof(wol->sopass)); -+} -+ -+/* -+ * pfe_eth_get_drvinfo - Fills in the drvinfo structure with some basic info -+ * -+ */ -+static void pfe_eth_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo -+ *drvinfo) -+{ -+ strlcpy(drvinfo->driver, DRV_NAME, sizeof(drvinfo->driver)); -+ strlcpy(drvinfo->version, DRV_VERSION, sizeof(drvinfo->version)); -+ strlcpy(drvinfo->fw_version, "N/A", sizeof(drvinfo->fw_version)); -+ strlcpy(drvinfo->bus_info, "N/A", sizeof(drvinfo->bus_info)); -+} -+ -+/* -+ * pfe_eth_set_settings - Used to send commands to PHY. -+ * -+ */ -+static int pfe_eth_set_settings(struct net_device *ndev, -+ const struct ethtool_link_ksettings *cmd) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ struct phy_device *phydev = priv->phydev; -+ -+ if (!phydev) -+ return -ENODEV; -+ -+ return phy_ethtool_ksettings_set(phydev, cmd); -+} -+ -+/* -+ * pfe_eth_getsettings - Return the current settings in the ethtool_cmd -+ * structure. -+ * -+ */ -+static int pfe_eth_get_settings(struct net_device *ndev, -+ struct ethtool_link_ksettings *cmd) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ struct phy_device *phydev = priv->phydev; -+ -+ if (!phydev) -+ return -ENODEV; -+ -+ phy_ethtool_ksettings_get(phydev, cmd); -+ -+ return 0; -+} -+ -+/* -+ * pfe_eth_get_msglevel - Gets the debug message mask. -+ * -+ */ -+static uint32_t pfe_eth_get_msglevel(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ return priv->msg_enable; -+} -+ -+/* -+ * pfe_eth_set_msglevel - Sets the debug message mask. -+ * -+ */ -+static void pfe_eth_set_msglevel(struct net_device *ndev, uint32_t data) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ priv->msg_enable = data; -+} -+ -+#define HIF_RX_COAL_MAX_CLKS (~(1 << 31)) -+#define HIF_RX_COAL_CLKS_PER_USEC (pfe->ctrl.sys_clk / 1000) -+#define HIF_RX_COAL_MAX_USECS (HIF_RX_COAL_MAX_CLKS / \ -+ HIF_RX_COAL_CLKS_PER_USEC) -+ -+/* -+ * pfe_eth_set_coalesce - Sets rx interrupt coalescing timer. -+ * -+ */ -+static int pfe_eth_set_coalesce(struct net_device *ndev, -+ struct ethtool_coalesce *ec) -+{ -+ if (ec->rx_coalesce_usecs > HIF_RX_COAL_MAX_USECS) -+ return -EINVAL; -+ -+ if (!ec->rx_coalesce_usecs) { -+ writel(0, HIF_INT_COAL); -+ return 0; -+ } -+ -+ writel((ec->rx_coalesce_usecs * HIF_RX_COAL_CLKS_PER_USEC) | -+ HIF_INT_COAL_ENABLE, HIF_INT_COAL); -+ -+ return 0; -+} -+ -+/* -+ * pfe_eth_get_coalesce - Gets rx interrupt coalescing timer value. -+ * -+ */ -+static int pfe_eth_get_coalesce(struct net_device *ndev, -+ struct ethtool_coalesce *ec) -+{ -+ int reg_val = readl(HIF_INT_COAL); -+ -+ if (reg_val & HIF_INT_COAL_ENABLE) -+ ec->rx_coalesce_usecs = (reg_val & HIF_RX_COAL_MAX_CLKS) / -+ HIF_RX_COAL_CLKS_PER_USEC; -+ else -+ ec->rx_coalesce_usecs = 0; -+ -+ return 0; -+} -+ -+/* -+ * pfe_eth_set_pauseparam - Sets pause parameters -+ * -+ */ -+static int pfe_eth_set_pauseparam(struct net_device *ndev, -+ struct ethtool_pauseparam *epause) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ if (epause->tx_pause != epause->rx_pause) { -+ netdev_info(ndev, -+ "hardware only support enable/disable both tx and rx\n"); -+ return -EINVAL; -+ } -+ -+ priv->pause_flag = 0; -+ priv->pause_flag |= epause->rx_pause ? PFE_PAUSE_FLAG_ENABLE : 0; -+ priv->pause_flag |= epause->autoneg ? PFE_PAUSE_FLAG_AUTONEG : 0; -+ -+ if (epause->rx_pause || epause->autoneg) { -+ gemac_enable_pause_rx(priv->EMAC_baseaddr); -+ writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) | -+ EGPI_PAUSE_ENABLE), -+ priv->GPI_baseaddr + GPI_TX_PAUSE_TIME); -+ if (priv->phydev) { -+ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, -+ priv->phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, -+ priv->phydev->supported); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_Pause_BIT, -+ priv->phydev->advertising); -+ linkmode_set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, -+ priv->phydev->advertising); -+ } -+ } else { -+ gemac_disable_pause_rx(priv->EMAC_baseaddr); -+ writel((readl(priv->GPI_baseaddr + GPI_TX_PAUSE_TIME) & -+ ~EGPI_PAUSE_ENABLE), -+ priv->GPI_baseaddr + GPI_TX_PAUSE_TIME); -+ if (priv->phydev) { -+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, -+ priv->phydev->supported); -+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, -+ priv->phydev->supported); -+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Pause_BIT, -+ priv->phydev->advertising); -+ linkmode_clear_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, -+ priv->phydev->advertising); -+ } -+ } -+ -+ return 0; -+} -+ -+/* -+ * pfe_eth_get_pauseparam - Gets pause parameters -+ * -+ */ -+static void pfe_eth_get_pauseparam(struct net_device *ndev, -+ struct ethtool_pauseparam *epause) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ epause->autoneg = (priv->pause_flag & PFE_PAUSE_FLAG_AUTONEG) != 0; -+ epause->tx_pause = (priv->pause_flag & PFE_PAUSE_FLAG_ENABLE) != 0; -+ epause->rx_pause = epause->tx_pause; -+} -+ -+/* -+ * pfe_eth_get_hash -+ */ -+#define PFE_HASH_BITS 6 /* #bits in hash */ -+#define CRC32_POLY 0xEDB88320 -+ -+static int pfe_eth_get_hash(u8 *addr) -+{ -+ unsigned int i, bit, data, crc, hash; -+ -+ /* calculate crc32 value of mac address */ -+ crc = 0xffffffff; -+ -+ for (i = 0; i < 6; i++) { -+ data = addr[i]; -+ for (bit = 0; bit < 8; bit++, data >>= 1) { -+ crc = (crc >> 1) ^ -+ (((crc ^ data) & 1) ? CRC32_POLY : 0); -+ } -+ } -+ -+ /* -+ * only upper 6 bits (PFE_HASH_BITS) are used -+ * which point to specific bit in the hash registers -+ */ -+ hash = (crc >> (32 - PFE_HASH_BITS)) & 0x3f; -+ -+ return hash; -+} -+ -+const struct ethtool_ops pfe_ethtool_ops = { -+ .supported_coalesce_params = ETHTOOL_COALESCE_RX_USECS, -+ .get_drvinfo = pfe_eth_get_drvinfo, -+ .get_regs_len = pfe_eth_gemac_reglen, -+ .get_regs = pfe_eth_gemac_get_regs, -+ .get_link = ethtool_op_get_link, -+ .get_wol = pfe_eth_get_wol, -+ .set_wol = pfe_eth_set_wol, -+ .set_pauseparam = pfe_eth_set_pauseparam, -+ .get_pauseparam = pfe_eth_get_pauseparam, -+ .get_strings = pfe_eth_gstrings, -+ .get_sset_count = pfe_eth_stats_count, -+ .get_ethtool_stats = pfe_eth_fill_stats, -+ .get_msglevel = pfe_eth_get_msglevel, -+ .set_msglevel = pfe_eth_set_msglevel, -+ .set_coalesce = pfe_eth_set_coalesce, -+ .get_coalesce = pfe_eth_get_coalesce, -+ .get_link_ksettings = pfe_eth_get_settings, -+ .set_link_ksettings = pfe_eth_set_settings, -+}; -+ -+/* pfe_eth_mdio_reset -+ */ -+int pfe_eth_mdio_reset(struct mii_bus *bus) -+{ -+ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; -+ u32 phy_speed; -+ -+ -+ mutex_lock(&bus->mdio_lock); -+ -+ /* -+ * Set MII speed to 2.5 MHz (= clk_get_rate() / 2 * phy_speed) -+ * -+ * The formula for FEC MDC is 'ref_freq / (MII_SPEED x 2)' while -+ * for ENET-MAC is 'ref_freq / ((MII_SPEED + 1) x 2)'. -+ */ -+ phy_speed = (DIV_ROUND_UP((pfe->ctrl.sys_clk * 1000), 4000000) -+ << EMAC_MII_SPEED_SHIFT); -+ phy_speed |= EMAC_HOLDTIME(0x5); -+ __raw_writel(phy_speed, priv->mdio_base + EMAC_MII_CTRL_REG); -+ -+ mutex_unlock(&bus->mdio_lock); -+ -+ return 0; -+} -+ -+/* pfe_eth_mdio_timeout -+ * -+ */ -+static int pfe_eth_mdio_timeout(struct pfe_mdio_priv_s *priv, int timeout) -+{ -+ while (!(__raw_readl(priv->mdio_base + EMAC_IEVENT_REG) & -+ EMAC_IEVENT_MII)) { -+ if (timeout-- <= 0) -+ return -1; -+ usleep_range(10, 20); -+ } -+ __raw_writel(EMAC_IEVENT_MII, priv->mdio_base + EMAC_IEVENT_REG); -+ return 0; -+} -+ -+static int pfe_eth_mdio_mux(u8 muxval) -+{ -+ struct i2c_adapter *a; -+ struct i2c_msg msg; -+ unsigned char buf[2]; -+ int ret; -+ -+ a = i2c_get_adapter(0); -+ if (!a) -+ return -ENODEV; -+ -+ /* set bit 1 (the second bit) of chip at 0x09, register 0x13 */ -+ buf[0] = 0x54; /* reg number */ -+ buf[1] = (muxval << 6) | 0x3; /* data */ -+ msg.addr = 0x66; -+ msg.buf = buf; -+ msg.len = 2; -+ msg.flags = 0; -+ ret = i2c_transfer(a, &msg, 1); -+ i2c_put_adapter(a); -+ if (ret != 1) -+ return -ENODEV; -+ return 0; -+} -+ -+static int pfe_eth_mdio_write_addr(struct mii_bus *bus, int mii_id, -+ int dev_addr, int regnum) -+{ -+ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; -+ -+ __raw_writel(EMAC_MII_DATA_PA(mii_id) | -+ EMAC_MII_DATA_RA(dev_addr) | -+ EMAC_MII_DATA_TA | EMAC_MII_DATA(regnum), -+ priv->mdio_base + EMAC_MII_DATA_REG); -+ -+ if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) { -+ dev_err(&bus->dev, "phy MDIO address write timeout\n"); -+ return -1; -+ } -+ -+ return 0; -+} -+ -+static int pfe_eth_mdio_write(struct mii_bus *bus, int mii_id, int regnum, -+ u16 value) -+{ -+ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; -+ -+ /*To access external PHYs on QDS board mux needs to be configured*/ -+ if ((mii_id) && (pfe->mdio_muxval[mii_id])) -+ pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]); -+ -+ if (regnum & MII_ADDR_C45) { -+ pfe_eth_mdio_write_addr(bus, mii_id, (regnum >> 16) & 0x1f, -+ regnum & 0xffff); -+ __raw_writel(EMAC_MII_DATA_OP_CL45_WR | -+ EMAC_MII_DATA_PA(mii_id) | -+ EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) | -+ EMAC_MII_DATA_TA | EMAC_MII_DATA(value), -+ priv->mdio_base + EMAC_MII_DATA_REG); -+ } else { -+ /* start a write op */ -+ __raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR | -+ EMAC_MII_DATA_PA(mii_id) | -+ EMAC_MII_DATA_RA(regnum) | -+ EMAC_MII_DATA_TA | EMAC_MII_DATA(value), -+ priv->mdio_base + EMAC_MII_DATA_REG); -+ } -+ -+ if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) { -+ dev_err(&bus->dev, "%s: phy MDIO write timeout\n", __func__); -+ return -1; -+ } -+ return 0; -+} -+ -+static int pfe_eth_mdio_read(struct mii_bus *bus, int mii_id, int regnum) -+{ -+ struct pfe_mdio_priv_s *priv = (struct pfe_mdio_priv_s *)bus->priv; -+ u16 value = 0; -+ -+ /*To access external PHYs on QDS board mux needs to be configured*/ -+ if ((mii_id) && (pfe->mdio_muxval[mii_id])) -+ pfe_eth_mdio_mux(pfe->mdio_muxval[mii_id]); -+ -+ if (regnum & MII_ADDR_C45) { -+ pfe_eth_mdio_write_addr(bus, mii_id, (regnum >> 16) & 0x1f, -+ regnum & 0xffff); -+ __raw_writel(EMAC_MII_DATA_OP_CL45_RD | -+ EMAC_MII_DATA_PA(mii_id) | -+ EMAC_MII_DATA_RA((regnum >> 16) & 0x1f) | -+ EMAC_MII_DATA_TA, -+ priv->mdio_base + EMAC_MII_DATA_REG); -+ } else { -+ /* start a read op */ -+ __raw_writel(EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD | -+ EMAC_MII_DATA_PA(mii_id) | -+ EMAC_MII_DATA_RA(regnum) | -+ EMAC_MII_DATA_TA, priv->mdio_base + -+ EMAC_MII_DATA_REG); -+ } -+ -+ if (pfe_eth_mdio_timeout(priv, EMAC_MDIO_TIMEOUT)) { -+ dev_err(&bus->dev, "%s: phy MDIO read timeout\n", __func__); -+ return -1; -+ } -+ -+ value = EMAC_MII_DATA(__raw_readl(priv->mdio_base + -+ EMAC_MII_DATA_REG)); -+ return value; -+} -+ -+static int pfe_eth_mdio_init(struct pfe *pfe, -+ struct ls1012a_pfe_platform_data *pfe_info, -+ int ii) -+{ -+ struct pfe_mdio_priv_s *priv = NULL; -+ struct ls1012a_mdio_platform_data *mdio_info; -+ struct mii_bus *bus; -+ struct device_node *mdio_node; -+ int rc = 0; -+ -+ mdio_info = (struct ls1012a_mdio_platform_data *) -+ pfe_info->ls1012a_mdio_pdata; -+ mdio_info->id = ii; -+ -+ bus = mdiobus_alloc_size(sizeof(struct pfe_mdio_priv_s)); -+ if (!bus) { -+ pr_err("mdiobus_alloc() failed\n"); -+ rc = -ENOMEM; -+ goto err_mdioalloc; -+ } -+ -+ bus->name = "ls1012a MDIO Bus"; -+ snprintf(bus->id, MII_BUS_ID_SIZE, "ls1012a-%x", mdio_info->id); -+ -+ bus->read = &pfe_eth_mdio_read; -+ bus->write = &pfe_eth_mdio_write; -+ bus->reset = &pfe_eth_mdio_reset; -+ bus->parent = pfe->dev; -+ bus->phy_mask = mdio_info->phy_mask; -+ bus->irq[0] = mdio_info->irq[0]; -+ priv = bus->priv; -+ priv->mdio_base = cbus_emac_base[ii]; -+ -+ priv->mdc_div = mdio_info->mdc_div; -+ if (!priv->mdc_div) -+ priv->mdc_div = 64; -+ -+ dev_info(bus->parent, "%s: mdc_div: %d, phy_mask: %x\n", -+ __func__, priv->mdc_div, bus->phy_mask); -+ mdio_node = of_get_child_by_name(pfe->dev->of_node, "mdio"); -+ if ((mdio_info->id == 0) && mdio_node) { -+ rc = of_mdiobus_register(bus, mdio_node); -+ of_node_put(mdio_node); -+ } else { -+ rc = mdiobus_register(bus); -+ } -+ -+ if (rc) { -+ dev_err(bus->parent, "mdiobus_register(%s) failed\n", -+ bus->name); -+ goto err_mdioregister; -+ } -+ -+ priv->mii_bus = bus; -+ pfe->mdio.mdio_priv[ii] = priv; -+ -+ pfe_eth_mdio_reset(bus); -+ -+ return 0; -+ -+err_mdioregister: -+ mdiobus_free(bus); -+err_mdioalloc: -+ return rc; -+} -+ -+/* pfe_eth_mdio_exit -+ */ -+static void pfe_eth_mdio_exit(struct pfe *pfe, -+ int ii) -+{ -+ struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[ii]; -+ struct mii_bus *bus = mdio_priv->mii_bus; -+ -+ if (!bus) -+ return; -+ mdiobus_unregister(bus); -+ mdiobus_free(bus); -+} -+ -+/* pfe_get_phydev_speed -+ */ -+static int pfe_get_phydev_speed(struct phy_device *phydev) -+{ -+ switch (phydev->speed) { -+ case 10: -+ return SPEED_10M; -+ case 100: -+ return SPEED_100M; -+ case 1000: -+ default: -+ return SPEED_1000M; -+ } -+} -+ -+/* pfe_set_rgmii_speed -+ */ -+#define RGMIIPCR 0x434 -+/* RGMIIPCR bit definitions*/ -+#define SCFG_RGMIIPCR_EN_AUTO (0x00000008) -+#define SCFG_RGMIIPCR_SETSP_1000M (0x00000004) -+#define SCFG_RGMIIPCR_SETSP_100M (0x00000000) -+#define SCFG_RGMIIPCR_SETSP_10M (0x00000002) -+#define SCFG_RGMIIPCR_SETFD (0x00000001) -+ -+#define MDIOSELCR 0x484 -+#define MDIOSEL_SERDES 0x0 -+#define MDIOSEL_EXTPHY 0x80000000 -+ -+static void pfe_set_rgmii_speed(struct phy_device *phydev) -+{ -+ u32 rgmii_pcr; -+ -+ regmap_read(pfe->scfg, RGMIIPCR, &rgmii_pcr); -+ rgmii_pcr &= ~(SCFG_RGMIIPCR_SETSP_1000M | SCFG_RGMIIPCR_SETSP_10M); -+ -+ switch (phydev->speed) { -+ case 10: -+ rgmii_pcr |= SCFG_RGMIIPCR_SETSP_10M; -+ break; -+ case 1000: -+ rgmii_pcr |= SCFG_RGMIIPCR_SETSP_1000M; -+ break; -+ case 100: -+ default: -+ /* Default is 100M */ -+ break; -+ } -+ regmap_write(pfe->scfg, RGMIIPCR, rgmii_pcr); -+} -+ -+/* pfe_get_phydev_duplex -+ */ -+static int pfe_get_phydev_duplex(struct phy_device *phydev) -+{ -+ /*return (phydev->duplex == DUPLEX_HALF) ? DUP_HALF:DUP_FULL ; */ -+ return DUPLEX_FULL; -+} -+ -+/* pfe_eth_adjust_link -+ */ -+static void pfe_eth_adjust_link(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ unsigned long flags; -+ struct phy_device *phydev = priv->phydev; -+ int new_state = 0; -+ -+ netif_info(priv, drv, ndev, "%s\n", __func__); -+ -+ spin_lock_irqsave(&priv->lock, flags); -+ -+ if (phydev->link) { -+ /* -+ * Now we make sure that we can be in full duplex mode. -+ * If not, we operate in half-duplex mode. -+ */ -+ if (phydev->duplex != priv->oldduplex) { -+ new_state = 1; -+ gemac_set_duplex(priv->EMAC_baseaddr, -+ pfe_get_phydev_duplex(phydev)); -+ priv->oldduplex = phydev->duplex; -+ } -+ -+ if (phydev->speed != priv->oldspeed) { -+ new_state = 1; -+ gemac_set_speed(priv->EMAC_baseaddr, -+ pfe_get_phydev_speed(phydev)); -+ if (priv->einfo->mii_config == -+ PHY_INTERFACE_MODE_RGMII_ID) -+ pfe_set_rgmii_speed(phydev); -+ priv->oldspeed = phydev->speed; -+ } -+ -+ if (!priv->oldlink) { -+ new_state = 1; -+ priv->oldlink = 1; -+ } -+ -+ } else if (priv->oldlink) { -+ new_state = 1; -+ priv->oldlink = 0; -+ priv->oldspeed = 0; -+ priv->oldduplex = -1; -+ } -+ -+ if (new_state && netif_msg_link(priv)) -+ phy_print_status(phydev); -+ -+ spin_unlock_irqrestore(&priv->lock, flags); -+ -+ /* Now, dump the details to the cdev. -+ * XXX: Locking would be required? (uniprocess arch) -+ * Or, maybe move it in spinlock above -+ */ -+ if (us && priv->einfo->gem_id < PFE_CDEV_ETH_COUNT) { -+ pr_debug("Changing link state from (%u) to (%u) for ID=(%u)\n", -+ link_states[priv->einfo->gem_id].state, -+ phydev->link, -+ priv->einfo->gem_id); -+ link_states[priv->einfo->gem_id].phy_id = priv->einfo->gem_id; -+ link_states[priv->einfo->gem_id].state = phydev->link; -+ } -+} -+ -+/* pfe_phy_exit -+ */ -+static void pfe_phy_exit(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ netif_info(priv, drv, ndev, "%s\n", __func__); -+ -+ phy_disconnect(priv->phydev); -+ priv->phydev = NULL; -+} -+ -+/* pfe_eth_stop -+ */ -+static void pfe_eth_stop(struct net_device *ndev, int wake) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ netif_info(priv, drv, ndev, "%s\n", __func__); -+ -+ if (wake) { -+ gemac_tx_disable(priv->EMAC_baseaddr); -+ } else { -+ gemac_disable(priv->EMAC_baseaddr); -+ gpi_disable(priv->GPI_baseaddr); -+ -+ if (priv->phydev) -+ phy_stop(priv->phydev); -+ } -+} -+ -+/* pfe_eth_start -+ */ -+static int pfe_eth_start(struct pfe_eth_priv_s *priv) -+{ -+ netif_info(priv, drv, priv->ndev, "%s\n", __func__); -+ -+ if (priv->phydev) -+ phy_start(priv->phydev); -+ -+ gpi_enable(priv->GPI_baseaddr); -+ gemac_enable(priv->EMAC_baseaddr); -+ -+ return 0; -+} -+ -+/* -+ * Configure on chip serdes through mdio -+ */ -+static void ls1012a_configure_serdes(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *eth_priv = netdev_priv(ndev); -+ struct pfe_mdio_priv_s *mdio_priv = pfe->mdio.mdio_priv[eth_priv->id]; -+ int sgmii_2500 = 0; -+ struct mii_bus *bus = mdio_priv->mii_bus; -+ u16 value = 0; -+ -+ if (eth_priv->einfo->mii_config == PHY_INTERFACE_MODE_2500SGMII) -+ sgmii_2500 = 1; -+ -+ netif_info(eth_priv, drv, ndev, "%s\n", __func__); -+ /* PCS configuration done with corresponding GEMAC */ -+ -+ pfe_eth_mdio_read(bus, 0, MDIO_SGMII_CR); -+ pfe_eth_mdio_read(bus, 0, MDIO_SGMII_SR); -+ -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, SGMII_CR_RST); -+ -+ if (sgmii_2500) { -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE, SGMII_SPEED_1GBPS -+ | SGMII_EN); -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII, -+ SGMII_DEV_ABIL_ACK | SGMII_DEV_ABIL_SGMII); -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0xa120); -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x7); -+ /* Autonegotiation need to be disabled for 2.5G SGMII mode*/ -+ value = SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G; -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value); -+ } else { -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_IF_MODE, -+ SGMII_SPEED_1GBPS -+ | SGMII_USE_SGMII_AN -+ | SGMII_EN); -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_DEV_ABIL_SGMII, -+ SGMII_DEV_ABIL_EEE_CLK_STP_EN -+ | 0xa0 -+ | SGMII_DEV_ABIL_SGMII); -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_L, 0x400); -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_LINK_TMR_H, 0x0); -+ value = SGMII_CR_AN_EN | SGMII_CR_FD | SGMII_CR_SPEED_SEL1_1G; -+ pfe_eth_mdio_write(bus, 0, MDIO_SGMII_CR, value); -+ } -+} -+ -+/* -+ * pfe_phy_init -+ * -+ */ -+static int pfe_phy_init(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ struct phy_device *phydev; -+ char phy_id[MII_BUS_ID_SIZE + 3]; -+ char bus_id[MII_BUS_ID_SIZE]; -+ phy_interface_t interface; -+ -+ priv->oldlink = 0; -+ priv->oldspeed = 0; -+ priv->oldduplex = -1; -+ -+ snprintf(bus_id, MII_BUS_ID_SIZE, "ls1012a-%d", 0); -+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT, bus_id, -+ priv->einfo->phy_id); -+ netif_info(priv, drv, ndev, "%s: %s\n", __func__, phy_id); -+ interface = priv->einfo->mii_config; -+ if ((interface == PHY_INTERFACE_MODE_SGMII) || -+ (interface == PHY_INTERFACE_MODE_2500SGMII)) { -+ /*Configure SGMII PCS */ -+ if (pfe->scfg) { -+ /* Config MDIO from serdes */ -+ regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_SERDES); -+ } -+ ls1012a_configure_serdes(ndev); -+ } -+ -+ if (pfe->scfg) { -+ /*Config MDIO from PAD */ -+ regmap_write(pfe->scfg, MDIOSELCR, MDIOSEL_EXTPHY); -+ } -+ -+ priv->oldlink = 0; -+ priv->oldspeed = 0; -+ priv->oldduplex = -1; -+ pr_info("%s interface %x\n", __func__, interface); -+ -+ if (priv->phy_node) { -+ phydev = of_phy_connect(ndev, priv->phy_node, -+ pfe_eth_adjust_link, 0, -+ priv->einfo->mii_config); -+ if (!(phydev)) { -+ netdev_err(ndev, "Unable to connect to phy\n"); -+ return -ENODEV; -+ } -+ -+ } else { -+ phydev = phy_connect(ndev, phy_id, -+ &pfe_eth_adjust_link, interface); -+ if (IS_ERR(phydev)) { -+ netdev_err(ndev, "Unable to connect to phy\n"); -+ return PTR_ERR(phydev); -+ } -+ } -+ -+ priv->phydev = phydev; -+ phydev->irq = PHY_POLL; -+ -+ return 0; -+} -+ -+/* pfe_gemac_init -+ */ -+static int pfe_gemac_init(struct pfe_eth_priv_s *priv) -+{ -+ struct gemac_cfg cfg; -+ -+ netif_info(priv, ifup, priv->ndev, "%s\n", __func__); -+ -+ cfg.mode = 0; -+ cfg.speed = SPEED_1000M; -+ cfg.duplex = DUPLEX_FULL; -+ -+ gemac_set_config(priv->EMAC_baseaddr, &cfg); -+ gemac_allow_broadcast(priv->EMAC_baseaddr); -+ gemac_enable_1536_rx(priv->EMAC_baseaddr); -+ gemac_enable_stacked_vlan(priv->EMAC_baseaddr); -+ gemac_enable_pause_rx(priv->EMAC_baseaddr); -+ gemac_set_bus_width(priv->EMAC_baseaddr, 64); -+ -+ /*GEM will perform checksum verifications*/ -+ if (priv->ndev->features & NETIF_F_RXCSUM) -+ gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr); -+ else -+ gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr); -+ -+ return 0; -+} -+ -+/* pfe_eth_event_handler -+ */ -+static int pfe_eth_event_handler(void *data, int event, int qno) -+{ -+ struct pfe_eth_priv_s *priv = data; -+ -+ switch (event) { -+ case EVENT_RX_PKT_IND: -+ -+ if (qno == 0) { -+ if (napi_schedule_prep(&priv->high_napi)) { -+ netif_info(priv, intr, priv->ndev, -+ "%s: schedule high prio poll\n" -+ , __func__); -+ -+#ifdef PFE_ETH_NAPI_STATS -+ priv->napi_counters[NAPI_SCHED_COUNT]++; -+#endif -+ -+ __napi_schedule(&priv->high_napi); -+ } -+ } else if (qno == 1) { -+ if (napi_schedule_prep(&priv->low_napi)) { -+ netif_info(priv, intr, priv->ndev, -+ "%s: schedule low prio poll\n" -+ , __func__); -+ -+#ifdef PFE_ETH_NAPI_STATS -+ priv->napi_counters[NAPI_SCHED_COUNT]++; -+#endif -+ __napi_schedule(&priv->low_napi); -+ } -+ } else if (qno == 2) { -+ if (napi_schedule_prep(&priv->lro_napi)) { -+ netif_info(priv, intr, priv->ndev, -+ "%s: schedule lro prio poll\n" -+ , __func__); -+ -+#ifdef PFE_ETH_NAPI_STATS -+ priv->napi_counters[NAPI_SCHED_COUNT]++; -+#endif -+ __napi_schedule(&priv->lro_napi); -+ } -+ } -+ -+ break; -+ -+ case EVENT_TXDONE_IND: -+ pfe_eth_flush_tx(priv); -+ hif_lib_event_handler_start(&priv->client, EVENT_TXDONE_IND, 0); -+ break; -+ case EVENT_HIGH_RX_WM: -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+static int pfe_eth_change_mtu(struct net_device *ndev, int new_mtu) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ ndev->mtu = new_mtu; -+ new_mtu += ETH_HLEN + ETH_FCS_LEN; -+ gemac_set_rx_max_fl(priv->EMAC_baseaddr, new_mtu); -+ -+ return 0; -+} -+ -+/* pfe_eth_open -+ */ -+static int pfe_eth_open(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ struct hif_client_s *client; -+ int rc; -+ -+ netif_info(priv, ifup, ndev, "%s\n", __func__); -+ -+ /* Register client driver with HIF */ -+ client = &priv->client; -+ memset(client, 0, sizeof(*client)); -+ client->id = PFE_CL_GEM0 + priv->id; -+ client->tx_qn = emac_txq_cnt; -+ client->rx_qn = EMAC_RXQ_CNT; -+ client->priv = priv; -+ client->pfe = priv->pfe; -+ client->event_handler = pfe_eth_event_handler; -+ -+ client->tx_qsize = EMAC_TXQ_DEPTH; -+ client->rx_qsize = EMAC_RXQ_DEPTH; -+ -+ rc = hif_lib_client_register(client); -+ if (rc) { -+ netdev_err(ndev, "%s: hif_lib_client_register(%d) failed\n", -+ __func__, client->id); -+ goto err0; -+ } -+ -+ netif_info(priv, drv, ndev, "%s: registered client: %p\n", __func__, -+ client); -+ -+ pfe_gemac_init(priv); -+ -+ if (!is_valid_ether_addr(ndev->dev_addr)) { -+ netdev_err(ndev, "%s: invalid MAC address\n", __func__); -+ rc = -EADDRNOTAVAIL; -+ goto err1; -+ } -+ -+ gemac_set_laddrN(priv->EMAC_baseaddr, -+ (struct pfe_mac_addr *)ndev->dev_addr, 1); -+ -+ napi_enable(&priv->high_napi); -+ napi_enable(&priv->low_napi); -+ napi_enable(&priv->lro_napi); -+ -+ rc = pfe_eth_start(priv); -+ -+ netif_tx_wake_all_queues(ndev); -+ -+ return rc; -+ -+err1: -+ hif_lib_client_unregister(&priv->client); -+ -+err0: -+ return rc; -+} -+ -+/* -+ * pfe_eth_shutdown -+ */ -+int pfe_eth_shutdown(struct net_device *ndev, int wake) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ int i, qstatus, id; -+ unsigned long next_poll = jiffies + 1, end = jiffies + -+ (TX_POLL_TIMEOUT_MS * HZ) / 1000; -+ int tx_pkts, prv_tx_pkts; -+ -+ netif_info(priv, ifdown, ndev, "%s\n", __func__); -+ -+ for (i = 0; i < emac_txq_cnt; i++) -+ hrtimer_cancel(&priv->fast_tx_timeout[i].timer); -+ -+ netif_tx_stop_all_queues(ndev); -+ -+ do { -+ tx_pkts = 0; -+ pfe_eth_flush_tx(priv); -+ -+ for (i = 0; i < emac_txq_cnt; i++) -+ tx_pkts += hif_lib_tx_pending(&priv->client, i); -+ -+ if (tx_pkts) { -+ /*Don't wait forever, break if we cross max timeout */ -+ if (time_after(jiffies, end)) { -+ pr_err( -+ "(%s)Tx is not complete after %dmsec\n", -+ ndev->name, TX_POLL_TIMEOUT_MS); -+ break; -+ } -+ -+ pr_info("%s : (%s) Waiting for tx packets to free. Pending tx pkts = %d.\n" -+ , __func__, ndev->name, tx_pkts); -+ if (need_resched()) -+ schedule(); -+ } -+ -+ } while (tx_pkts); -+ -+ end = jiffies + (TX_POLL_TIMEOUT_MS * HZ) / 1000; -+ -+ prv_tx_pkts = tmu_pkts_processed(priv->id); -+ /* -+ * Wait till TMU transmits all pending packets -+ * poll tmu_qstatus and pkts processed by TMU for every 10ms -+ * Consider TMU is busy, If we see TMU qeueu pending or any packets -+ * processed by TMU -+ */ -+ while (1) { -+ if (time_after(jiffies, next_poll)) { -+ tx_pkts = tmu_pkts_processed(priv->id); -+ qstatus = tmu_qstatus(priv->id) & 0x7ffff; -+ -+ if (!qstatus && (tx_pkts == prv_tx_pkts)) -+ break; -+ /* Don't wait forever, break if we cross max -+ * timeout(TX_POLL_TIMEOUT_MS) -+ */ -+ if (time_after(jiffies, end)) { -+ pr_err("TMU%d is busy after %dmsec\n", -+ priv->id, TX_POLL_TIMEOUT_MS); -+ break; -+ } -+ prv_tx_pkts = tx_pkts; -+ next_poll++; -+ } -+ if (need_resched()) -+ schedule(); -+ } -+ /* Wait for some more time to complete transmitting packet if any */ -+ next_poll = jiffies + 1; -+ while (1) { -+ if (time_after(jiffies, next_poll)) -+ break; -+ if (need_resched()) -+ schedule(); -+ } -+ -+ pfe_eth_stop(ndev, wake); -+ -+ napi_disable(&priv->lro_napi); -+ napi_disable(&priv->low_napi); -+ napi_disable(&priv->high_napi); -+ -+ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) { -+ pe_dmem_write(id, 0, CLASS_DM_CRC_VALIDATED -+ + (priv->id * 4), 4); -+ } -+ -+ hif_lib_client_unregister(&priv->client); -+ -+ return 0; -+} -+ -+/* pfe_eth_close -+ * -+ */ -+static int pfe_eth_close(struct net_device *ndev) -+{ -+ pfe_eth_shutdown(ndev, 0); -+ -+ return 0; -+} -+ -+/* pfe_eth_suspend -+ * -+ * return value : 1 if netdevice is configured to wakeup system -+ * 0 otherwise -+ */ -+int pfe_eth_suspend(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ int retval = 0; -+ -+ if (priv->wol) { -+ gemac_set_wol(priv->EMAC_baseaddr, priv->wol); -+ retval = 1; -+ } -+ pfe_eth_shutdown(ndev, priv->wol); -+ -+ return retval; -+} -+ -+/* pfe_eth_resume -+ * -+ */ -+int pfe_eth_resume(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ if (priv->wol) -+ gemac_set_wol(priv->EMAC_baseaddr, 0); -+ gemac_tx_enable(priv->EMAC_baseaddr); -+ -+ return pfe_eth_open(ndev); -+} -+ -+/* pfe_eth_get_queuenum -+ */ -+static int pfe_eth_get_queuenum(struct pfe_eth_priv_s *priv, struct sk_buff -+ *skb) -+{ -+ int queuenum = 0; -+ unsigned long flags; -+ -+ /* Get the Fast Path queue number */ -+ /* -+ * Use conntrack mark (if conntrack exists), then packet mark (if any), -+ * then fallback to default -+ */ -+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK) -+ if (skb->_nfct) { -+ enum ip_conntrack_info cinfo; -+ struct nf_conn *ct; -+ -+ ct = nf_ct_get(skb, &cinfo); -+ -+ if (ct) { -+ u32 connmark; -+ -+ connmark = ct->mark; -+ -+ if ((connmark & 0x80000000) && priv->id != 0) -+ connmark >>= 16; -+ -+ queuenum = connmark & EMAC_QUEUENUM_MASK; -+ } -+ } else {/* continued after #endif ... */ -+#endif -+ if (skb->mark) { -+ queuenum = skb->mark & EMAC_QUEUENUM_MASK; -+ } else { -+ spin_lock_irqsave(&priv->lock, flags); -+ queuenum = priv->default_priority & EMAC_QUEUENUM_MASK; -+ spin_unlock_irqrestore(&priv->lock, flags); -+ } -+#if defined(CONFIG_IP_NF_CONNTRACK_MARK) || defined(CONFIG_NF_CONNTRACK_MARK) -+ } -+#endif -+ return queuenum; -+} -+ -+/* pfe_eth_might_stop_tx -+ * -+ */ -+static int pfe_eth_might_stop_tx(struct pfe_eth_priv_s *priv, int queuenum, -+ struct netdev_queue *tx_queue, -+ unsigned int n_desc, -+ unsigned int n_segs) -+{ -+ ktime_t kt; -+ int tried = 0; -+ -+try_again: -+ if (unlikely((__hif_tx_avail(&pfe->hif) < n_desc) || -+ (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) || -+ (hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < n_segs))) { -+ if (!tried) { -+ __hif_lib_update_credit(&priv->client, queuenum); -+ tried = 1; -+ goto try_again; -+ } -+#ifdef PFE_ETH_TX_STATS -+ if (__hif_tx_avail(&pfe->hif) < n_desc) { -+ priv->stop_queue_hif[queuenum]++; -+ } else if (hif_lib_tx_avail(&priv->client, queuenum) < n_desc) { -+ priv->stop_queue_hif_client[queuenum]++; -+ } else if (hif_lib_tx_credit_avail(pfe, priv->id, queuenum) < -+ n_segs) { -+ priv->stop_queue_credit[queuenum]++; -+ } -+ priv->stop_queue_total[queuenum]++; -+#endif -+ netif_tx_stop_queue(tx_queue); -+ -+ kt = ktime_set(0, LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS * -+ NSEC_PER_MSEC); -+ hrtimer_start(&priv->fast_tx_timeout[queuenum].timer, kt, -+ HRTIMER_MODE_REL); -+ return -1; -+ } else { -+ return 0; -+ } -+} -+ -+#define SA_MAX_OP 2 -+/* pfe_hif_send_packet -+ * -+ * At this level if TX fails we drop the packet -+ */ -+static void pfe_hif_send_packet(struct sk_buff *skb, struct pfe_eth_priv_s -+ *priv, int queuenum) -+{ -+ struct skb_shared_info *sh = skb_shinfo(skb); -+ unsigned int nr_frags; -+ u32 ctrl = 0; -+ -+ netif_info(priv, tx_queued, priv->ndev, "%s\n", __func__); -+ -+ if (skb_is_gso(skb)) { -+ priv->stats.tx_dropped++; -+ return; -+ } -+ -+ if (skb->ip_summed == CHECKSUM_PARTIAL) -+ ctrl = HIF_CTRL_TX_CHECKSUM; -+ -+ nr_frags = sh->nr_frags; -+ -+ if (nr_frags) { -+ skb_frag_t *f; -+ int i; -+ -+ __hif_lib_xmit_pkt(&priv->client, queuenum, skb->data, -+ skb_headlen(skb), ctrl, HIF_FIRST_BUFFER, -+ skb); -+ -+ for (i = 0; i < nr_frags - 1; i++) { -+ f = &sh->frags[i]; -+ __hif_lib_xmit_pkt(&priv->client, queuenum, -+ skb_frag_address(f), -+ skb_frag_size(f), -+ 0x0, 0x0, skb); -+ } -+ -+ f = &sh->frags[i]; -+ -+ __hif_lib_xmit_pkt(&priv->client, queuenum, -+ skb_frag_address(f), skb_frag_size(f), -+ 0x0, HIF_LAST_BUFFER | HIF_DATA_VALID, -+ skb); -+ -+ netif_info(priv, tx_queued, priv->ndev, -+ "%s: pkt sent successfully skb:%p nr_frags:%d len:%d\n", -+ __func__, skb, nr_frags, skb->len); -+ } else { -+ __hif_lib_xmit_pkt(&priv->client, queuenum, skb->data, -+ skb->len, ctrl, HIF_FIRST_BUFFER | -+ HIF_LAST_BUFFER | HIF_DATA_VALID, -+ skb); -+ netif_info(priv, tx_queued, priv->ndev, -+ "%s: pkt sent successfully skb:%p len:%d\n", -+ __func__, skb, skb->len); -+ } -+ hif_tx_dma_start(); -+ priv->stats.tx_packets++; -+ priv->stats.tx_bytes += skb->len; -+ hif_lib_tx_credit_use(pfe, priv->id, queuenum, 1); -+} -+ -+/* pfe_eth_flush_txQ -+ */ -+static void pfe_eth_flush_txQ(struct pfe_eth_priv_s *priv, int tx_q_num, int -+ from_tx, int n_desc) -+{ -+ struct sk_buff *skb; -+ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev, -+ tx_q_num); -+ unsigned int flags; -+ -+ netif_info(priv, tx_done, priv->ndev, "%s\n", __func__); -+ -+ if (!from_tx) -+ __netif_tx_lock_bh(tx_queue); -+ -+ /* Clean HIF and client queue */ -+ while ((skb = hif_lib_tx_get_next_complete(&priv->client, -+ tx_q_num, &flags, -+ HIF_TX_DESC_NT))) { -+ if (flags & HIF_DATA_VALID) -+ dev_kfree_skb_any(skb); -+ } -+ if (!from_tx) -+ __netif_tx_unlock_bh(tx_queue); -+} -+ -+/* pfe_eth_flush_tx -+ */ -+static void pfe_eth_flush_tx(struct pfe_eth_priv_s *priv) -+{ -+ int ii; -+ -+ netif_info(priv, tx_done, priv->ndev, "%s\n", __func__); -+ -+ for (ii = 0; ii < emac_txq_cnt; ii++) { -+ pfe_eth_flush_txQ(priv, ii, 0, 0); -+ __hif_lib_update_credit(&priv->client, ii); -+ } -+} -+ -+void pfe_tx_get_req_desc(struct sk_buff *skb, unsigned int *n_desc, unsigned int -+ *n_segs) -+{ -+ struct skb_shared_info *sh = skb_shinfo(skb); -+ -+ /* Scattered data */ -+ if (sh->nr_frags) { -+ *n_desc = sh->nr_frags + 1; -+ *n_segs = 1; -+ /* Regular case */ -+ } else { -+ *n_desc = 1; -+ *n_segs = 1; -+ } -+} -+ -+/* pfe_eth_send_packet -+ */ -+static int pfe_eth_send_packet(struct sk_buff *skb, struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ int tx_q_num = skb_get_queue_mapping(skb); -+ int n_desc, n_segs; -+ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev, -+ tx_q_num); -+ -+ netif_info(priv, tx_queued, ndev, "%s\n", __func__); -+ -+ if ((!skb_is_gso(skb)) && (skb_headroom(skb) < (PFE_PKT_HEADER_SZ + -+ sizeof(unsigned long)))) { -+ netif_warn(priv, tx_err, priv->ndev, "%s: copying skb\n", -+ __func__); -+ -+ if (pskb_expand_head(skb, (PFE_PKT_HEADER_SZ + sizeof(unsigned -+ long)), 0, GFP_ATOMIC)) { -+ /* No need to re-transmit, no way to recover*/ -+ kfree_skb(skb); -+ priv->stats.tx_dropped++; -+ return NETDEV_TX_OK; -+ } -+ } -+ -+ pfe_tx_get_req_desc(skb, &n_desc, &n_segs); -+ -+ hif_tx_lock(&pfe->hif); -+ if (unlikely(pfe_eth_might_stop_tx(priv, tx_q_num, tx_queue, n_desc, -+ n_segs))) { -+#ifdef PFE_ETH_TX_STATS -+ if (priv->was_stopped[tx_q_num]) { -+ priv->clean_fail[tx_q_num]++; -+ priv->was_stopped[tx_q_num] = 0; -+ } -+#endif -+ hif_tx_unlock(&pfe->hif); -+ return NETDEV_TX_BUSY; -+ } -+ -+ pfe_hif_send_packet(skb, priv, tx_q_num); -+ -+ hif_tx_unlock(&pfe->hif); -+ -+ tx_queue->trans_start = jiffies; -+ -+#ifdef PFE_ETH_TX_STATS -+ priv->was_stopped[tx_q_num] = 0; -+#endif -+ -+ return NETDEV_TX_OK; -+} -+ -+/* pfe_eth_select_queue -+ * -+ */ -+static u16 pfe_eth_select_queue(struct net_device *ndev, struct sk_buff *skb, -+ struct net_device *sb_dev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ return pfe_eth_get_queuenum(priv, skb); -+} -+ -+/* pfe_eth_get_stats -+ */ -+static struct net_device_stats *pfe_eth_get_stats(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ -+ netif_info(priv, drv, ndev, "%s\n", __func__); -+ -+ return &priv->stats; -+} -+ -+/* pfe_eth_set_mac_address -+ */ -+static int pfe_eth_set_mac_address(struct net_device *ndev, void *addr) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ struct sockaddr *sa = addr; -+ -+ netif_info(priv, drv, ndev, "%s\n", __func__); -+ -+ if (!is_valid_ether_addr(sa->sa_data)) -+ return -EADDRNOTAVAIL; -+ -+ memcpy(ndev->dev_addr, sa->sa_data, ETH_ALEN); -+ -+ gemac_set_laddrN(priv->EMAC_baseaddr, -+ (struct pfe_mac_addr *)ndev->dev_addr, 1); -+ -+ return 0; -+} -+ -+/* pfe_eth_enet_addr_byte_mac -+ */ -+int pfe_eth_enet_addr_byte_mac(u8 *enet_byte_addr, -+ struct pfe_mac_addr *enet_addr) -+{ -+ if (!enet_byte_addr || !enet_addr) { -+ return -1; -+ -+ } else { -+ enet_addr->bottom = enet_byte_addr[0] | -+ (enet_byte_addr[1] << 8) | -+ (enet_byte_addr[2] << 16) | -+ (enet_byte_addr[3] << 24); -+ enet_addr->top = enet_byte_addr[4] | -+ (enet_byte_addr[5] << 8); -+ return 0; -+ } -+} -+ -+/* pfe_eth_set_multi -+ */ -+static void pfe_eth_set_multi(struct net_device *ndev) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ struct pfe_mac_addr hash_addr; /* hash register structure */ -+ /* specific mac address register structure */ -+ struct pfe_mac_addr spec_addr; -+ int result; /* index into hash register to set.. */ -+ int uc_count = 0; -+ struct netdev_hw_addr *ha; -+ -+ if (ndev->flags & IFF_PROMISC) { -+ netif_info(priv, drv, ndev, "entering promiscuous mode\n"); -+ -+ priv->promisc = 1; -+ gemac_enable_copy_all(priv->EMAC_baseaddr); -+ } else { -+ priv->promisc = 0; -+ gemac_disable_copy_all(priv->EMAC_baseaddr); -+ } -+ -+ /* Enable broadcast frame reception if required. */ -+ if (ndev->flags & IFF_BROADCAST) { -+ gemac_allow_broadcast(priv->EMAC_baseaddr); -+ } else { -+ netif_info(priv, drv, ndev, -+ "disabling broadcast frame reception\n"); -+ -+ gemac_no_broadcast(priv->EMAC_baseaddr); -+ } -+ -+ if (ndev->flags & IFF_ALLMULTI) { -+ /* Set the hash to rx all multicast frames */ -+ hash_addr.bottom = 0xFFFFFFFF; -+ hash_addr.top = 0xFFFFFFFF; -+ gemac_set_hash(priv->EMAC_baseaddr, &hash_addr); -+ netdev_for_each_uc_addr(ha, ndev) { -+ if (uc_count >= MAX_UC_SPEC_ADDR_REG) -+ break; -+ pfe_eth_enet_addr_byte_mac(ha->addr, &spec_addr); -+ gemac_set_laddrN(priv->EMAC_baseaddr, &spec_addr, -+ uc_count + 2); -+ uc_count++; -+ } -+ } else if ((netdev_mc_count(ndev) > 0) || (netdev_uc_count(ndev))) { -+ u8 *addr; -+ -+ hash_addr.bottom = 0; -+ hash_addr.top = 0; -+ -+ netdev_for_each_mc_addr(ha, ndev) { -+ addr = ha->addr; -+ -+ netif_info(priv, drv, ndev, -+ "adding multicast address %X:%X:%X:%X:%X:%X to gem filter\n", -+ addr[0], addr[1], addr[2], -+ addr[3], addr[4], addr[5]); -+ -+ result = pfe_eth_get_hash(addr); -+ -+ if (result < EMAC_HASH_REG_BITS) { -+ if (result < 32) -+ hash_addr.bottom |= (1 << result); -+ else -+ hash_addr.top |= (1 << (result - 32)); -+ } else { -+ break; -+ } -+ } -+ -+ uc_count = -1; -+ netdev_for_each_uc_addr(ha, ndev) { -+ addr = ha->addr; -+ -+ if (++uc_count < MAX_UC_SPEC_ADDR_REG) { -+ netdev_info(ndev, -+ "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem filter\n", -+ addr[0], addr[1], addr[2], -+ addr[3], addr[4], addr[5]); -+ pfe_eth_enet_addr_byte_mac(addr, &spec_addr); -+ gemac_set_laddrN(priv->EMAC_baseaddr, -+ &spec_addr, uc_count + 2); -+ } else { -+ netif_info(priv, drv, ndev, -+ "adding unicast address %02x:%02x:%02x:%02x:%02x:%02x to gem hash\n", -+ addr[0], addr[1], addr[2], -+ addr[3], addr[4], addr[5]); -+ -+ result = pfe_eth_get_hash(addr); -+ if (result >= EMAC_HASH_REG_BITS) { -+ break; -+ -+ } else { -+ if (result < 32) -+ hash_addr.bottom |= (1 << -+ result); -+ else -+ hash_addr.top |= (1 << -+ (result - 32)); -+ } -+ } -+ } -+ -+ gemac_set_hash(priv->EMAC_baseaddr, &hash_addr); -+ } -+ -+ if (!(netdev_uc_count(ndev) >= MAX_UC_SPEC_ADDR_REG)) { -+ /* -+ * Check if there are any specific address HW registers that -+ * need to be flushed -+ */ -+ for (uc_count = netdev_uc_count(ndev); uc_count < -+ MAX_UC_SPEC_ADDR_REG; uc_count++) -+ gemac_clear_laddrN(priv->EMAC_baseaddr, uc_count + 2); -+ } -+ -+ if (ndev->flags & IFF_LOOPBACK) -+ gemac_set_loop(priv->EMAC_baseaddr, LB_LOCAL); -+} -+ -+/* pfe_eth_set_features -+ */ -+static int pfe_eth_set_features(struct net_device *ndev, netdev_features_t -+ features) -+{ -+ struct pfe_eth_priv_s *priv = netdev_priv(ndev); -+ int rc = 0; -+ -+ if (features & NETIF_F_RXCSUM) -+ gemac_enable_rx_checksum_offload(priv->EMAC_baseaddr); -+ else -+ gemac_disable_rx_checksum_offload(priv->EMAC_baseaddr); -+ return rc; -+} -+ -+/* pfe_eth_fast_tx_timeout -+ */ -+static enum hrtimer_restart pfe_eth_fast_tx_timeout(struct hrtimer *timer) -+{ -+ struct pfe_eth_fast_timer *fast_tx_timeout = container_of(timer, struct -+ pfe_eth_fast_timer, -+ timer); -+ struct pfe_eth_priv_s *priv = container_of(fast_tx_timeout->base, -+ struct pfe_eth_priv_s, -+ fast_tx_timeout); -+ struct netdev_queue *tx_queue = netdev_get_tx_queue(priv->ndev, -+ fast_tx_timeout->queuenum); -+ -+ if (netif_tx_queue_stopped(tx_queue)) { -+#ifdef PFE_ETH_TX_STATS -+ priv->was_stopped[fast_tx_timeout->queuenum] = 1; -+#endif -+ netif_tx_wake_queue(tx_queue); -+ } -+ -+ return HRTIMER_NORESTART; -+} -+ -+/* pfe_eth_fast_tx_timeout_init -+ */ -+static void pfe_eth_fast_tx_timeout_init(struct pfe_eth_priv_s *priv) -+{ -+ int i; -+ -+ for (i = 0; i < emac_txq_cnt; i++) { -+ priv->fast_tx_timeout[i].queuenum = i; -+ hrtimer_init(&priv->fast_tx_timeout[i].timer, CLOCK_MONOTONIC, -+ HRTIMER_MODE_REL); -+ priv->fast_tx_timeout[i].timer.function = -+ pfe_eth_fast_tx_timeout; -+ priv->fast_tx_timeout[i].base = priv->fast_tx_timeout; -+ } -+} -+ -+static struct sk_buff *pfe_eth_rx_skb(struct net_device *ndev, -+ struct pfe_eth_priv_s *priv, -+ unsigned int qno) -+{ -+ void *buf_addr; -+ unsigned int rx_ctrl; -+ unsigned int desc_ctrl = 0; -+ struct hif_ipsec_hdr *ipsec_hdr = NULL; -+ struct sk_buff *skb; -+ struct sk_buff *skb_frag, *skb_frag_last = NULL; -+ int length = 0, offset; -+ -+ skb = priv->skb_inflight[qno]; -+ -+ if (skb) { -+ skb_frag_last = skb_shinfo(skb)->frag_list; -+ if (skb_frag_last) { -+ while (skb_frag_last->next) -+ skb_frag_last = skb_frag_last->next; -+ } -+ } -+ -+ while (!(desc_ctrl & CL_DESC_LAST)) { -+ buf_addr = hif_lib_receive_pkt(&priv->client, qno, &length, -+ &offset, &rx_ctrl, &desc_ctrl, -+ (void **)&ipsec_hdr); -+ if (!buf_addr) -+ goto incomplete; -+ -+#ifdef PFE_ETH_NAPI_STATS -+ priv->napi_counters[NAPI_DESC_COUNT]++; -+#endif -+ -+ /* First frag */ -+ if (desc_ctrl & CL_DESC_FIRST) { -+ skb = build_skb(buf_addr, 0); -+ if (unlikely(!skb)) -+ goto pkt_drop; -+ -+ skb_reserve(skb, offset); -+ skb_put(skb, length); -+ skb->dev = ndev; -+ -+ if ((ndev->features & NETIF_F_RXCSUM) && (rx_ctrl & -+ HIF_CTRL_RX_CHECKSUMMED)) -+ skb->ip_summed = CHECKSUM_UNNECESSARY; -+ else -+ skb_checksum_none_assert(skb); -+ -+ } else { -+ /* Next frags */ -+ if (unlikely(!skb)) { -+ pr_err("%s: NULL skb_inflight\n", -+ __func__); -+ goto pkt_drop; -+ } -+ -+ skb_frag = build_skb(buf_addr, 0); -+ -+ if (unlikely(!skb_frag)) { -+ kfree(buf_addr); -+ goto pkt_drop; -+ } -+ -+ skb_reserve(skb_frag, offset); -+ skb_put(skb_frag, length); -+ -+ skb_frag->dev = ndev; -+ -+ if (skb_shinfo(skb)->frag_list) -+ skb_frag_last->next = skb_frag; -+ else -+ skb_shinfo(skb)->frag_list = skb_frag; -+ -+ skb->truesize += skb_frag->truesize; -+ skb->data_len += length; -+ skb->len += length; -+ skb_frag_last = skb_frag; -+ } -+ } -+ -+ priv->skb_inflight[qno] = NULL; -+ return skb; -+ -+incomplete: -+ priv->skb_inflight[qno] = skb; -+ return NULL; -+ -+pkt_drop: -+ priv->skb_inflight[qno] = NULL; -+ -+ if (skb) -+ kfree_skb(skb); -+ else -+ kfree(buf_addr); -+ -+ priv->stats.rx_errors++; -+ -+ return NULL; -+} -+ -+/* pfe_eth_poll -+ */ -+static int pfe_eth_poll(struct pfe_eth_priv_s *priv, struct napi_struct *napi, -+ unsigned int qno, int budget) -+{ -+ struct net_device *ndev = priv->ndev; -+ struct sk_buff *skb; -+ int work_done = 0; -+ unsigned int len; -+ -+ netif_info(priv, intr, priv->ndev, "%s\n", __func__); -+ -+#ifdef PFE_ETH_NAPI_STATS -+ priv->napi_counters[NAPI_POLL_COUNT]++; -+#endif -+ -+ do { -+ skb = pfe_eth_rx_skb(ndev, priv, qno); -+ -+ if (!skb) -+ break; -+ -+ len = skb->len; -+ -+ /* Packet will be processed */ -+ skb->protocol = eth_type_trans(skb, ndev); -+ -+ netif_receive_skb(skb); -+ -+ priv->stats.rx_packets++; -+ priv->stats.rx_bytes += len; -+ -+ work_done++; -+ -+#ifdef PFE_ETH_NAPI_STATS -+ priv->napi_counters[NAPI_PACKET_COUNT]++; -+#endif -+ -+ } while (work_done < budget); -+ -+ /* -+ * If no Rx receive nor cleanup work was done, exit polling mode. -+ * No more netif_running(dev) check is required here , as this is -+ * checked in net/core/dev.c (2.6.33.5 kernel specific). -+ */ -+ if (work_done < budget) { -+ napi_complete(napi); -+ -+ hif_lib_event_handler_start(&priv->client, EVENT_RX_PKT_IND, -+ qno); -+ } -+#ifdef PFE_ETH_NAPI_STATS -+ else -+ priv->napi_counters[NAPI_FULL_BUDGET_COUNT]++; -+#endif -+ -+ return work_done; -+} -+ -+/* -+ * pfe_eth_lro_poll -+ */ -+static int pfe_eth_lro_poll(struct napi_struct *napi, int budget) -+{ -+ struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s, -+ lro_napi); -+ -+ netif_info(priv, intr, priv->ndev, "%s\n", __func__); -+ -+ return pfe_eth_poll(priv, napi, 2, budget); -+} -+ -+/* pfe_eth_low_poll -+ */ -+static int pfe_eth_low_poll(struct napi_struct *napi, int budget) -+{ -+ struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s, -+ low_napi); -+ -+ netif_info(priv, intr, priv->ndev, "%s\n", __func__); -+ -+ return pfe_eth_poll(priv, napi, 1, budget); -+} -+ -+/* pfe_eth_high_poll -+ */ -+static int pfe_eth_high_poll(struct napi_struct *napi, int budget) -+{ -+ struct pfe_eth_priv_s *priv = container_of(napi, struct pfe_eth_priv_s, -+ high_napi); -+ -+ netif_info(priv, intr, priv->ndev, "%s\n", __func__); -+ -+ return pfe_eth_poll(priv, napi, 0, budget); -+} -+ -+static const struct net_device_ops pfe_netdev_ops = { -+ .ndo_open = pfe_eth_open, -+ .ndo_stop = pfe_eth_close, -+ .ndo_start_xmit = pfe_eth_send_packet, -+ .ndo_select_queue = pfe_eth_select_queue, -+ .ndo_set_rx_mode = pfe_eth_set_multi, -+ .ndo_set_mac_address = pfe_eth_set_mac_address, -+ .ndo_validate_addr = eth_validate_addr, -+ .ndo_change_mtu = pfe_eth_change_mtu, -+ .ndo_get_stats = pfe_eth_get_stats, -+ .ndo_set_features = pfe_eth_set_features, -+}; -+ -+/* pfe_eth_init_one -+ */ -+static int pfe_eth_init_one(struct pfe *pfe, -+ struct ls1012a_pfe_platform_data *pfe_info, -+ int id) -+{ -+ struct net_device *ndev = NULL; -+ struct pfe_eth_priv_s *priv = NULL; -+ struct ls1012a_eth_platform_data *einfo; -+ int err; -+ -+ einfo = (struct ls1012a_eth_platform_data *) -+ pfe_info->ls1012a_eth_pdata; -+ -+ /* einfo never be NULL, but no harm in having this check */ -+ if (!einfo) { -+ pr_err( -+ "%s: pfe missing additional gemacs platform data\n" -+ , __func__); -+ err = -ENODEV; -+ goto err0; -+ } -+ -+ if (us) -+ emac_txq_cnt = EMAC_TXQ_CNT; -+ /* Create an ethernet device instance */ -+ ndev = alloc_etherdev_mq(sizeof(*priv), emac_txq_cnt); -+ -+ if (!ndev) { -+ pr_err("%s: gemac %d device allocation failed\n", -+ __func__, einfo[id].gem_id); -+ err = -ENOMEM; -+ goto err0; -+ } -+ -+ priv = netdev_priv(ndev); -+ priv->ndev = ndev; -+ priv->id = einfo[id].gem_id; -+ priv->pfe = pfe; -+ priv->phy_node = einfo[id].phy_node; -+ -+ SET_NETDEV_DEV(priv->ndev, priv->pfe->dev); -+ -+ pfe->eth.eth_priv[id] = priv; -+ -+ /* Set the info in the priv to the current info */ -+ priv->einfo = &einfo[id]; -+ priv->EMAC_baseaddr = cbus_emac_base[id]; -+ priv->GPI_baseaddr = cbus_gpi_base[id]; -+ -+ spin_lock_init(&priv->lock); -+ -+ pfe_eth_fast_tx_timeout_init(priv); -+ -+ /* Copy the station address into the dev structure, */ -+ memcpy(ndev->dev_addr, einfo[id].mac_addr, ETH_ALEN); -+ -+ if (us) -+ goto phy_init; -+ -+ ndev->mtu = 1500; -+ -+ /* Set MTU limits */ -+ ndev->min_mtu = ETH_MIN_MTU; -+ -+/* -+ * Jumbo frames are not supported on LS1012A rev-1.0. -+ * So max mtu should be restricted to supported frame length. -+ */ -+ if (pfe_errata_a010897) -+ ndev->max_mtu = JUMBO_FRAME_SIZE_V1 - ETH_HLEN - ETH_FCS_LEN; -+ else -+ ndev->max_mtu = JUMBO_FRAME_SIZE_V2 - ETH_HLEN - ETH_FCS_LEN; -+ -+ /*Enable after checksum offload is validated */ -+ ndev->hw_features = NETIF_F_RXCSUM | NETIF_F_IP_CSUM | -+ NETIF_F_IPV6_CSUM | NETIF_F_SG; -+ -+ /* enabled by default */ -+ ndev->features = ndev->hw_features; -+ -+ priv->usr_features = ndev->features; -+ -+ ndev->netdev_ops = &pfe_netdev_ops; -+ -+ ndev->ethtool_ops = &pfe_ethtool_ops; -+ -+ /* Enable basic messages by default */ -+ priv->msg_enable = NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK | -+ NETIF_MSG_PROBE; -+ -+ netif_napi_add(ndev, &priv->low_napi, pfe_eth_low_poll, -+ HIF_RX_POLL_WEIGHT - 16); -+ netif_napi_add(ndev, &priv->high_napi, pfe_eth_high_poll, -+ HIF_RX_POLL_WEIGHT - 16); -+ netif_napi_add(ndev, &priv->lro_napi, pfe_eth_lro_poll, -+ HIF_RX_POLL_WEIGHT - 16); -+ -+ err = register_netdev(ndev); -+ if (err) { -+ netdev_err(ndev, "register_netdev() failed\n"); -+ goto err1; -+ } -+ -+ if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) || -+ ((pfe_use_old_dts_phy) && -+ (priv->einfo->phy_flags & GEMAC_NO_PHY))) { -+ pr_info("%s: No PHY or fixed-link\n", __func__); -+ goto skip_phy_init; -+ } -+ -+phy_init: -+ device_init_wakeup(&ndev->dev, WAKE_MAGIC); -+ -+ err = pfe_phy_init(ndev); -+ if (err) { -+ netdev_err(ndev, "%s: pfe_phy_init() failed\n", -+ __func__); -+ goto err2; -+ } -+ -+ if (us) { -+ if (priv->phydev) -+ phy_start(priv->phydev); -+ return 0; -+ } -+ -+ netif_carrier_on(ndev); -+ -+skip_phy_init: -+ /* Create all the sysfs files */ -+ if (pfe_eth_sysfs_init(ndev)) -+ goto err3; -+ -+ netif_info(priv, probe, ndev, "%s: created interface, baseaddr: %p\n", -+ __func__, priv->EMAC_baseaddr); -+ -+ return 0; -+ -+err3: -+ pfe_phy_exit(priv->ndev); -+err2: -+ if (us) -+ goto err1; -+ unregister_netdev(ndev); -+err1: -+ free_netdev(priv->ndev); -+err0: -+ return err; -+} -+ -+/* pfe_eth_init -+ */ -+int pfe_eth_init(struct pfe *pfe) -+{ -+ int ii = 0; -+ int err; -+ struct ls1012a_pfe_platform_data *pfe_info; -+ -+ pr_info("%s\n", __func__); -+ -+ cbus_emac_base[0] = EMAC1_BASE_ADDR; -+ cbus_emac_base[1] = EMAC2_BASE_ADDR; -+ -+ cbus_gpi_base[0] = EGPI1_BASE_ADDR; -+ cbus_gpi_base[1] = EGPI2_BASE_ADDR; -+ -+ pfe_info = (struct ls1012a_pfe_platform_data *) -+ pfe->dev->platform_data; -+ if (!pfe_info) { -+ pr_err("%s: pfe missing additional platform data\n", __func__); -+ err = -ENODEV; -+ goto err_pdata; -+ } -+ -+ for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) { -+ err = pfe_eth_mdio_init(pfe, pfe_info, ii); -+ if (err) { -+ pr_err("%s: pfe_eth_mdio_init() failed\n", __func__); -+ goto err_mdio_init; -+ } -+ } -+ -+ if (soc_device_match(ls1012a_rev1_soc_attr)) -+ pfe_errata_a010897 = true; -+ else -+ pfe_errata_a010897 = false; -+ -+ for (ii = 0; ii < NUM_GEMAC_SUPPORT; ii++) { -+ err = pfe_eth_init_one(pfe, pfe_info, ii); -+ if (err) -+ goto err_eth_init; -+ } -+ -+ return 0; -+ -+err_eth_init: -+ while (ii--) { -+ pfe_eth_exit_one(pfe->eth.eth_priv[ii]); -+ pfe_eth_mdio_exit(pfe, ii); -+ } -+ -+err_mdio_init: -+err_pdata: -+ return err; -+} -+ -+/* pfe_eth_exit_one -+ */ -+static void pfe_eth_exit_one(struct pfe_eth_priv_s *priv) -+{ -+ netif_info(priv, probe, priv->ndev, "%s\n", __func__); -+ -+ if (!us) -+ pfe_eth_sysfs_exit(priv->ndev); -+ -+ if ((!(pfe_use_old_dts_phy) && !(priv->phy_node)) || -+ ((pfe_use_old_dts_phy) && -+ (priv->einfo->phy_flags & GEMAC_NO_PHY))) { -+ pr_info("%s: No PHY or fixed-link\n", __func__); -+ goto skip_phy_exit; -+ } -+ -+ pfe_phy_exit(priv->ndev); -+ -+skip_phy_exit: -+ if (!us) -+ unregister_netdev(priv->ndev); -+ -+ free_netdev(priv->ndev); -+} -+ -+/* pfe_eth_exit -+ */ -+void pfe_eth_exit(struct pfe *pfe) -+{ -+ int ii; -+ -+ pr_info("%s\n", __func__); -+ -+ for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--) -+ pfe_eth_exit_one(pfe->eth.eth_priv[ii]); -+ -+ for (ii = NUM_GEMAC_SUPPORT - 1; ii >= 0; ii--) -+ pfe_eth_mdio_exit(pfe, ii); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_eth.h -@@ -0,0 +1,175 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_ETH_H_ -+#define _PFE_ETH_H_ -+#include <linux/kernel.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/ethtool.h> -+#include <linux/mii.h> -+#include <linux/phy.h> -+#include <linux/clk.h> -+#include <linux/interrupt.h> -+#include <linux/time.h> -+ -+#define PFE_ETH_NAPI_STATS -+#define PFE_ETH_TX_STATS -+ -+#define PFE_ETH_FRAGS_MAX (65536 / HIF_RX_PKT_MIN_SIZE) -+#define LRO_LEN_COUNT_MAX 32 -+#define LRO_NB_COUNT_MAX 32 -+ -+#define PFE_PAUSE_FLAG_ENABLE 1 -+#define PFE_PAUSE_FLAG_AUTONEG 2 -+ -+/* GEMAC configured by SW */ -+/* GEMAC configured by phy lines (not for MII/GMII) */ -+ -+#define GEMAC_SW_FULL_DUPLEX BIT(9) -+#define GEMAC_SW_SPEED_10M (0 << 12) -+#define GEMAC_SW_SPEED_100M BIT(12) -+#define GEMAC_SW_SPEED_1G (2 << 12) -+ -+#define GEMAC_NO_PHY BIT(0) -+ -+struct ls1012a_eth_platform_data { -+ /* board specific information */ -+ phy_interface_t mii_config; -+ u32 phy_flags; -+ u32 gem_id; -+ u32 phy_id; -+ u32 mdio_muxval; -+ u8 mac_addr[ETH_ALEN]; -+ struct device_node *phy_node; -+}; -+ -+struct ls1012a_mdio_platform_data { -+ int id; -+ int irq[32]; -+ u32 phy_mask; -+ int mdc_div; -+}; -+ -+struct ls1012a_pfe_platform_data { -+ struct ls1012a_eth_platform_data ls1012a_eth_pdata[3]; -+ struct ls1012a_mdio_platform_data ls1012a_mdio_pdata[3]; -+}; -+ -+#define NUM_GEMAC_SUPPORT 2 -+#define DRV_NAME "pfe-eth" -+#define DRV_VERSION "1.0" -+ -+#define LS1012A_TX_FAST_RECOVERY_TIMEOUT_MS 3 -+#define TX_POLL_TIMEOUT_MS 1000 -+ -+#define EMAC_TXQ_CNT 16 -+#define EMAC_TXQ_DEPTH (HIF_TX_DESC_NT) -+ -+#define JUMBO_FRAME_SIZE_V1 1900 -+#define JUMBO_FRAME_SIZE_V2 10258 -+/* -+ * Client Tx queue threshold, for txQ flush condition. -+ * It must be smaller than the queue size (in case we ever change it in the -+ * future). -+ */ -+#define HIF_CL_TX_FLUSH_MARK 32 -+ -+/* -+ * Max number of TX resources (HIF descriptors or skbs) that will be released -+ * in a single go during batch recycling. -+ * Should be lower than the flush mark so the SW can provide the HW with a -+ * continuous stream of packets instead of bursts. -+ */ -+#define TX_FREE_MAX_COUNT 16 -+#define EMAC_RXQ_CNT 3 -+#define EMAC_RXQ_DEPTH HIF_RX_DESC_NT -+/* make sure clients can receive a full burst of packets */ -+#define EMAC_RMON_TXBYTES_POS 0x00 -+#define EMAC_RMON_RXBYTES_POS 0x14 -+ -+#define EMAC_QUEUENUM_MASK (emac_txq_cnt - 1) -+#define EMAC_MDIO_TIMEOUT 1000 -+#define MAX_UC_SPEC_ADDR_REG 31 -+ -+struct pfe_eth_fast_timer { -+ int queuenum; -+ struct hrtimer timer; -+ void *base; -+}; -+ -+struct pfe_eth_priv_s { -+ struct pfe *pfe; -+ struct hif_client_s client; -+ struct napi_struct lro_napi; -+ struct napi_struct low_napi; -+ struct napi_struct high_napi; -+ int low_tmu_q; -+ int high_tmu_q; -+ struct net_device_stats stats; -+ struct net_device *ndev; -+ int id; -+ int promisc; -+ unsigned int msg_enable; -+ unsigned int usr_features; -+ -+ spinlock_t lock; /* protect member variables */ -+ unsigned int event_status; -+ int irq; -+ void *EMAC_baseaddr; -+ void *GPI_baseaddr; -+ /* PHY stuff */ -+ struct phy_device *phydev; -+ int oldspeed; -+ int oldduplex; -+ int oldlink; -+ struct device_node *phy_node; -+ struct clk *gemtx_clk; -+ int wol; -+ int pause_flag; -+ -+ int default_priority; -+ struct pfe_eth_fast_timer fast_tx_timeout[EMAC_TXQ_CNT]; -+ -+ struct ls1012a_eth_platform_data *einfo; -+ struct sk_buff *skb_inflight[EMAC_RXQ_CNT + 6]; -+ -+#ifdef PFE_ETH_TX_STATS -+ unsigned int stop_queue_total[EMAC_TXQ_CNT]; -+ unsigned int stop_queue_hif[EMAC_TXQ_CNT]; -+ unsigned int stop_queue_hif_client[EMAC_TXQ_CNT]; -+ unsigned int stop_queue_credit[EMAC_TXQ_CNT]; -+ unsigned int clean_fail[EMAC_TXQ_CNT]; -+ unsigned int was_stopped[EMAC_TXQ_CNT]; -+#endif -+ -+#ifdef PFE_ETH_NAPI_STATS -+ unsigned int napi_counters[NAPI_MAX_COUNT]; -+#endif -+ unsigned int frags_inflight[EMAC_RXQ_CNT + 6]; -+}; -+ -+struct pfe_eth { -+ struct pfe_eth_priv_s *eth_priv[3]; -+}; -+ -+struct pfe_mdio_priv_s { -+ void __iomem *mdio_base; -+ int mdc_div; -+ struct mii_bus *mii_bus; -+}; -+ -+struct pfe_mdio { -+ struct pfe_mdio_priv_s *mdio_priv[3]; -+}; -+ -+int pfe_eth_init(struct pfe *pfe); -+void pfe_eth_exit(struct pfe *pfe); -+int pfe_eth_suspend(struct net_device *dev); -+int pfe_eth_resume(struct net_device *dev); -+int pfe_eth_mdio_reset(struct mii_bus *bus); -+ -+#endif /* _PFE_ETH_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_firmware.c -@@ -0,0 +1,398 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+/* -+ * @file -+ * Contains all the functions to handle parsing and loading of PE firmware -+ * files. -+ */ -+#include <linux/firmware.h> -+ -+#include "pfe_mod.h" -+#include "pfe_firmware.h" -+#include "pfe/pfe.h" -+#include <linux/of_platform.h> -+#include <linux/of_address.h> -+ -+static struct elf32_shdr *get_elf_section_header(const u8 *fw, -+ const char *section) -+{ -+ struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw; -+ struct elf32_shdr *shdr; -+ struct elf32_shdr *shdr_shstr; -+ Elf32_Off e_shoff = be32_to_cpu(elf_hdr->e_shoff); -+ Elf32_Half e_shentsize = be16_to_cpu(elf_hdr->e_shentsize); -+ Elf32_Half e_shnum = be16_to_cpu(elf_hdr->e_shnum); -+ Elf32_Half e_shstrndx = be16_to_cpu(elf_hdr->e_shstrndx); -+ Elf32_Off shstr_offset; -+ Elf32_Word sh_name; -+ const char *name; -+ int i; -+ -+ /* Section header strings */ -+ shdr_shstr = (struct elf32_shdr *)((u8 *)elf_hdr + e_shoff + e_shstrndx -+ * e_shentsize); -+ shstr_offset = be32_to_cpu(shdr_shstr->sh_offset); -+ -+ for (i = 0; i < e_shnum; i++) { -+ shdr = (struct elf32_shdr *)((u8 *)elf_hdr + e_shoff -+ + i * e_shentsize); -+ -+ sh_name = be32_to_cpu(shdr->sh_name); -+ -+ name = (const char *)((u8 *)elf_hdr + shstr_offset + sh_name); -+ -+ if (!strcmp(name, section)) -+ return shdr; -+ } -+ -+ pr_err("%s: didn't find section %s\n", __func__, section); -+ -+ return NULL; -+} -+ -+#if defined(CFG_DIAGS) -+static int pfe_get_diags_info(const u8 *fw, struct pfe_diags_info -+ *diags_info) -+{ -+ struct elf32_shdr *shdr; -+ unsigned long offset, size; -+ -+ shdr = get_elf_section_header(fw, ".pfe_diags_str"); -+ if (shdr) { -+ offset = be32_to_cpu(shdr->sh_offset); -+ size = be32_to_cpu(shdr->sh_size); -+ diags_info->diags_str_base = be32_to_cpu(shdr->sh_addr); -+ diags_info->diags_str_size = size; -+ diags_info->diags_str_array = kmalloc(size, GFP_KERNEL); -+ memcpy(diags_info->diags_str_array, fw + offset, size); -+ -+ return 0; -+ } else { -+ return -1; -+ } -+} -+#endif -+ -+static void pfe_check_version_info(const u8 *fw) -+{ -+ /*static char *version = NULL;*/ -+ const u8 *elf_data = fw; -+ static char *version; -+ -+ struct elf32_shdr *shdr = get_elf_section_header(fw, ".version"); -+ -+ if (shdr) { -+ if (!version) { -+ /* -+ * this is the first fw we load, use its version -+ * string as reference (whatever it is) -+ */ -+ version = (char *)(elf_data + -+ be32_to_cpu(shdr->sh_offset)); -+ -+ pr_info("PFE binary version: %s\n", version); -+ } else { -+ /* -+ * already have loaded at least one firmware, check -+ * sequence can start now -+ */ -+ if (strcmp(version, (char *)(elf_data + -+ be32_to_cpu(shdr->sh_offset)))) { -+ pr_info( -+ "WARNING: PFE firmware binaries from incompatible version\n"); -+ } -+ } -+ } else { -+ /* -+ * version cannot be verified, a potential issue that should -+ * be reported -+ */ -+ pr_info( -+ "WARNING: PFE firmware binaries from incompatible version\n"); -+ } -+} -+ -+/* PFE elf firmware loader. -+ * Loads an elf firmware image into a list of PE's (specified using a bitmask) -+ * -+ * @param pe_mask Mask of PE id's to load firmware to -+ * @param fw Pointer to the firmware image -+ * -+ * @return 0 on success, a negative value on error -+ * -+ */ -+int pfe_load_elf(int pe_mask, const u8 *fw, struct pfe *pfe) -+{ -+ struct elf32_hdr *elf_hdr = (struct elf32_hdr *)fw; -+ Elf32_Half sections = be16_to_cpu(elf_hdr->e_shnum); -+ struct elf32_shdr *shdr = (struct elf32_shdr *)(fw + -+ be32_to_cpu(elf_hdr->e_shoff)); -+ int id, section; -+ int rc; -+ -+ pr_info("%s\n", __func__); -+ -+ /* Some sanity checks */ -+ if (strncmp(&elf_hdr->e_ident[EI_MAG0], ELFMAG, SELFMAG)) { -+ pr_err("%s: incorrect elf magic number\n", __func__); -+ return -EINVAL; -+ } -+ -+ if (elf_hdr->e_ident[EI_CLASS] != ELFCLASS32) { -+ pr_err("%s: incorrect elf class(%x)\n", __func__, -+ elf_hdr->e_ident[EI_CLASS]); -+ return -EINVAL; -+ } -+ -+ if (elf_hdr->e_ident[EI_DATA] != ELFDATA2MSB) { -+ pr_err("%s: incorrect elf data(%x)\n", __func__, -+ elf_hdr->e_ident[EI_DATA]); -+ return -EINVAL; -+ } -+ -+ if (be16_to_cpu(elf_hdr->e_type) != ET_EXEC) { -+ pr_err("%s: incorrect elf file type(%x)\n", __func__, -+ be16_to_cpu(elf_hdr->e_type)); -+ return -EINVAL; -+ } -+ -+ for (section = 0; section < sections; section++, shdr++) { -+ if (!(be32_to_cpu(shdr->sh_flags) & (SHF_WRITE | SHF_ALLOC | -+ SHF_EXECINSTR))) -+ continue; -+ -+ for (id = 0; id < MAX_PE; id++) -+ if (pe_mask & (1 << id)) { -+ rc = pe_load_elf_section(id, elf_hdr, shdr, -+ pfe->dev); -+ if (rc < 0) -+ goto err; -+ } -+ } -+ -+ pfe_check_version_info(fw); -+ -+ return 0; -+ -+err: -+ return rc; -+} -+ -+int get_firmware_in_fdt(const u8 **pe_fw, const char *name) -+{ -+ struct device_node *np; -+ const unsigned int *len; -+ const void *data; -+ -+ if (!strcmp(name, CLASS_FIRMWARE_FILENAME)) { -+ /* The firmware should be inside the device tree. */ -+ np = of_find_compatible_node(NULL, NULL, -+ "fsl,pfe-class-firmware"); -+ if (!np) { -+ pr_info("Failed to find the node\n"); -+ return -ENOENT; -+ } -+ -+ data = of_get_property(np, "fsl,class-firmware", NULL); -+ if (data) { -+ len = of_get_property(np, "length", NULL); -+ pr_info("CLASS fw of length %d bytes loaded from FDT.\n", -+ be32_to_cpu(*len)); -+ } else { -+ pr_info("fsl,class-firmware not found!!!!\n"); -+ return -ENOENT; -+ } -+ of_node_put(np); -+ *pe_fw = data; -+ } else if (!strcmp(name, TMU_FIRMWARE_FILENAME)) { -+ np = of_find_compatible_node(NULL, NULL, -+ "fsl,pfe-tmu-firmware"); -+ if (!np) { -+ pr_info("Failed to find the node\n"); -+ return -ENOENT; -+ } -+ -+ data = of_get_property(np, "fsl,tmu-firmware", NULL); -+ if (data) { -+ len = of_get_property(np, "length", NULL); -+ pr_info("TMU fw of length %d bytes loaded from FDT.\n", -+ be32_to_cpu(*len)); -+ } else { -+ pr_info("fsl,tmu-firmware not found!!!!\n"); -+ return -ENOENT; -+ } -+ of_node_put(np); -+ *pe_fw = data; -+ } else if (!strcmp(name, UTIL_FIRMWARE_FILENAME)) { -+ np = of_find_compatible_node(NULL, NULL, -+ "fsl,pfe-util-firmware"); -+ if (!np) { -+ pr_info("Failed to find the node\n"); -+ return -ENOENT; -+ } -+ -+ data = of_get_property(np, "fsl,util-firmware", NULL); -+ if (data) { -+ len = of_get_property(np, "length", NULL); -+ pr_info("UTIL fw of length %d bytes loaded from FDT.\n", -+ be32_to_cpu(*len)); -+ } else { -+ pr_info("fsl,util-firmware not found!!!!\n"); -+ return -ENOENT; -+ } -+ of_node_put(np); -+ *pe_fw = data; -+ } else { -+ pr_err("firmware:%s not known\n", name); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* PFE firmware initialization. -+ * Loads different firmware files from filesystem. -+ * Initializes PE IMEM/DMEM and UTIL-PE DDR -+ * Initializes control path symbol addresses (by looking them up in the elf -+ * firmware files -+ * Takes PE's out of reset -+ * -+ * @return 0 on success, a negative value on error -+ * -+ */ -+int pfe_firmware_init(struct pfe *pfe) -+{ -+ const struct firmware *class_fw, *tmu_fw; -+ const u8 *class_elf_fw, *tmu_elf_fw; -+ int rc = 0, fs_load = 0; -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ const struct firmware *util_fw; -+ const u8 *util_elf_fw; -+ -+#endif -+ -+ pr_info("%s\n", __func__); -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ if (get_firmware_in_fdt(&class_elf_fw, CLASS_FIRMWARE_FILENAME) || -+ get_firmware_in_fdt(&tmu_elf_fw, TMU_FIRMWARE_FILENAME) || -+ get_firmware_in_fdt(&util_elf_fw, UTIL_FIRMWARE_FILENAME)) -+#else -+ if (get_firmware_in_fdt(&class_elf_fw, CLASS_FIRMWARE_FILENAME) || -+ get_firmware_in_fdt(&tmu_elf_fw, TMU_FIRMWARE_FILENAME)) -+#endif -+ { -+ pr_info("%s:PFE firmware not found in FDT.\n", __func__); -+ pr_info("%s:Trying to load firmware from filesystem...!\n", __func__); -+ -+ /* look for firmware in filesystem...!*/ -+ fs_load = 1; -+ if (request_firmware(&class_fw, CLASS_FIRMWARE_FILENAME, pfe->dev)) { -+ pr_err("%s: request firmware %s failed\n", __func__, -+ CLASS_FIRMWARE_FILENAME); -+ rc = -ETIMEDOUT; -+ goto err0; -+ } -+ class_elf_fw = class_fw->data; -+ -+ if (request_firmware(&tmu_fw, TMU_FIRMWARE_FILENAME, pfe->dev)) { -+ pr_err("%s: request firmware %s failed\n", __func__, -+ TMU_FIRMWARE_FILENAME); -+ rc = -ETIMEDOUT; -+ goto err1; -+ } -+ tmu_elf_fw = tmu_fw->data; -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ if (request_firmware(&util_fw, UTIL_FIRMWARE_FILENAME, pfe->dev)) { -+ pr_err("%s: request firmware %s failed\n", __func__, -+ UTIL_FIRMWARE_FILENAME); -+ rc = -ETIMEDOUT; -+ goto err2; -+ } -+ util_elf_fw = util_fw->data; -+#endif -+ } -+ -+ rc = pfe_load_elf(CLASS_MASK, class_elf_fw, pfe); -+ if (rc < 0) { -+ pr_err("%s: class firmware load failed\n", __func__); -+ goto err3; -+ } -+ -+#if defined(CFG_DIAGS) -+ rc = pfe_get_diags_info(class_elf_fw, &pfe->diags.class_diags_info); -+ if (rc < 0) { -+ pr_warn( -+ "PFE diags won't be available for class PEs\n"); -+ rc = 0; -+ } -+#endif -+ -+ rc = pfe_load_elf(TMU_MASK, tmu_elf_fw, pfe); -+ if (rc < 0) { -+ pr_err("%s: tmu firmware load failed\n", __func__); -+ goto err3; -+ } -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ rc = pfe_load_elf(UTIL_MASK, util_elf_fw, pfe); -+ if (rc < 0) { -+ pr_err("%s: util firmware load failed\n", __func__); -+ goto err3; -+ } -+ -+#if defined(CFG_DIAGS) -+ rc = pfe_get_diags_info(util_elf_fw, &pfe->diags.util_diags_info); -+ if (rc < 0) { -+ pr_warn( -+ "PFE diags won't be available for util PE\n"); -+ rc = 0; -+ } -+#endif -+ -+ util_enable(); -+#endif -+ -+ tmu_enable(0xf); -+ class_enable(); -+ -+err3: -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ if (fs_load) -+ release_firmware(util_fw); -+err2: -+#endif -+ if (fs_load) -+ release_firmware(tmu_fw); -+ -+err1: -+ if (fs_load) -+ release_firmware(class_fw); -+ -+err0: -+ return rc; -+} -+ -+/* PFE firmware cleanup -+ * Puts PE's in reset -+ * -+ * -+ */ -+void pfe_firmware_exit(struct pfe *pfe) -+{ -+ pr_info("%s\n", __func__); -+ -+ if (pe_reset_all(&pfe->ctrl) != 0) -+ pr_err("Error: Failed to stop PEs, PFE reload may not work correctly\n"); -+ -+ class_disable(); -+ tmu_disable(0xf); -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ util_disable(); -+#endif -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_firmware.h -@@ -0,0 +1,21 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_FIRMWARE_H_ -+#define _PFE_FIRMWARE_H_ -+ -+#define CLASS_FIRMWARE_FILENAME "ppfe_class_ls1012a.elf" -+#define TMU_FIRMWARE_FILENAME "ppfe_tmu_ls1012a.elf" -+#define UTIL_FIRMWARE_FILENAME "ppfe_util_ls1012a.elf" -+ -+#define PFE_FW_CHECK_PASS 0 -+#define PFE_FW_CHECK_FAIL 1 -+#define NUM_PFE_FW 3 -+ -+int pfe_firmware_init(struct pfe *pfe); -+void pfe_firmware_exit(struct pfe *pfe); -+ -+#endif /* _PFE_FIRMWARE_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_hal.c -@@ -0,0 +1,1517 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include "pfe_mod.h" -+#include "pfe/pfe.h" -+ -+/* A-010897: Jumbo frame is not supported */ -+extern bool pfe_errata_a010897; -+ -+#define PFE_RCR_MAX_FL_MASK 0xC000FFFF -+ -+void *cbus_base_addr; -+void *ddr_base_addr; -+unsigned long ddr_phys_base_addr; -+unsigned int ddr_size; -+ -+static struct pe_info pe[MAX_PE]; -+ -+/* Initializes the PFE library. -+ * Must be called before using any of the library functions. -+ * -+ * @param[in] cbus_base CBUS virtual base address (as mapped in -+ * the host CPU address space) -+ * @param[in] ddr_base PFE DDR range virtual base address (as -+ * mapped in the host CPU address space) -+ * @param[in] ddr_phys_base PFE DDR range physical base address (as -+ * mapped in platform) -+ * @param[in] size PFE DDR range size (as defined by the host -+ * software) -+ */ -+void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base, -+ unsigned int size) -+{ -+ cbus_base_addr = cbus_base; -+ ddr_base_addr = ddr_base; -+ ddr_phys_base_addr = ddr_phys_base; -+ ddr_size = size; -+ -+ pe[CLASS0_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(0); -+ pe[CLASS0_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(0); -+ pe[CLASS0_ID].pmem_size = CLASS_IMEM_SIZE; -+ pe[CLASS0_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; -+ pe[CLASS0_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; -+ pe[CLASS0_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; -+ -+ pe[CLASS1_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(1); -+ pe[CLASS1_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(1); -+ pe[CLASS1_ID].pmem_size = CLASS_IMEM_SIZE; -+ pe[CLASS1_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; -+ pe[CLASS1_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; -+ pe[CLASS1_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; -+ -+ pe[CLASS2_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(2); -+ pe[CLASS2_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(2); -+ pe[CLASS2_ID].pmem_size = CLASS_IMEM_SIZE; -+ pe[CLASS2_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; -+ pe[CLASS2_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; -+ pe[CLASS2_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; -+ -+ pe[CLASS3_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(3); -+ pe[CLASS3_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(3); -+ pe[CLASS3_ID].pmem_size = CLASS_IMEM_SIZE; -+ pe[CLASS3_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; -+ pe[CLASS3_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; -+ pe[CLASS3_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; -+ -+ pe[CLASS4_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(4); -+ pe[CLASS4_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(4); -+ pe[CLASS4_ID].pmem_size = CLASS_IMEM_SIZE; -+ pe[CLASS4_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; -+ pe[CLASS4_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; -+ pe[CLASS4_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; -+ -+ pe[CLASS5_ID].dmem_base_addr = CLASS_DMEM_BASE_ADDR(5); -+ pe[CLASS5_ID].pmem_base_addr = CLASS_IMEM_BASE_ADDR(5); -+ pe[CLASS5_ID].pmem_size = CLASS_IMEM_SIZE; -+ pe[CLASS5_ID].mem_access_wdata = CLASS_MEM_ACCESS_WDATA; -+ pe[CLASS5_ID].mem_access_addr = CLASS_MEM_ACCESS_ADDR; -+ pe[CLASS5_ID].mem_access_rdata = CLASS_MEM_ACCESS_RDATA; -+ -+ pe[TMU0_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(0); -+ pe[TMU0_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(0); -+ pe[TMU0_ID].pmem_size = TMU_IMEM_SIZE; -+ pe[TMU0_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA; -+ pe[TMU0_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR; -+ pe[TMU0_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA; -+ -+ pe[TMU1_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(1); -+ pe[TMU1_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(1); -+ pe[TMU1_ID].pmem_size = TMU_IMEM_SIZE; -+ pe[TMU1_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA; -+ pe[TMU1_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR; -+ pe[TMU1_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA; -+ -+ pe[TMU3_ID].dmem_base_addr = TMU_DMEM_BASE_ADDR(3); -+ pe[TMU3_ID].pmem_base_addr = TMU_IMEM_BASE_ADDR(3); -+ pe[TMU3_ID].pmem_size = TMU_IMEM_SIZE; -+ pe[TMU3_ID].mem_access_wdata = TMU_MEM_ACCESS_WDATA; -+ pe[TMU3_ID].mem_access_addr = TMU_MEM_ACCESS_ADDR; -+ pe[TMU3_ID].mem_access_rdata = TMU_MEM_ACCESS_RDATA; -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ pe[UTIL_ID].dmem_base_addr = UTIL_DMEM_BASE_ADDR; -+ pe[UTIL_ID].mem_access_wdata = UTIL_MEM_ACCESS_WDATA; -+ pe[UTIL_ID].mem_access_addr = UTIL_MEM_ACCESS_ADDR; -+ pe[UTIL_ID].mem_access_rdata = UTIL_MEM_ACCESS_RDATA; -+#endif -+} -+ -+/* Writes a buffer to PE internal memory from the host -+ * through indirect access registers. -+ * -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., UTIL_ID) -+ * @param[in] src Buffer source address -+ * @param[in] mem_access_addr DMEM destination address (must be 32bit -+ * aligned) -+ * @param[in] len Number of bytes to copy -+ */ -+void pe_mem_memcpy_to32(int id, u32 mem_access_addr, const void *src, unsigned -+int len) -+{ -+ u32 offset = 0, val, addr; -+ unsigned int len32 = len >> 2; -+ int i; -+ -+ addr = mem_access_addr | PE_MEM_ACCESS_WRITE | -+ PE_MEM_ACCESS_BYTE_ENABLE(0, 4); -+ -+ for (i = 0; i < len32; i++, offset += 4, src += 4) { -+ val = *(u32 *)src; -+ writel(cpu_to_be32(val), pe[id].mem_access_wdata); -+ writel(addr + offset, pe[id].mem_access_addr); -+ } -+ -+ len = (len & 0x3); -+ if (len) { -+ val = 0; -+ -+ addr = (mem_access_addr | PE_MEM_ACCESS_WRITE | -+ PE_MEM_ACCESS_BYTE_ENABLE(0, len)) + offset; -+ -+ for (i = 0; i < len; i++, src++) -+ val |= (*(u8 *)src) << (8 * i); -+ -+ writel(cpu_to_be32(val), pe[id].mem_access_wdata); -+ writel(addr, pe[id].mem_access_addr); -+ } -+} -+ -+/* Writes a buffer to PE internal data memory (DMEM) from the host -+ * through indirect access registers. -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., UTIL_ID) -+ * @param[in] src Buffer source address -+ * @param[in] dst DMEM destination address (must be 32bit -+ * aligned) -+ * @param[in] len Number of bytes to copy -+ */ -+void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len) -+{ -+ pe_mem_memcpy_to32(id, pe[id].dmem_base_addr | dst | -+ PE_MEM_ACCESS_DMEM, src, len); -+} -+ -+/* Writes a buffer to PE internal program memory (PMEM) from the host -+ * through indirect access registers. -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., TMU3_ID) -+ * @param[in] src Buffer source address -+ * @param[in] dst PMEM destination address (must be 32bit -+ * aligned) -+ * @param[in] len Number of bytes to copy -+ */ -+void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len) -+{ -+ pe_mem_memcpy_to32(id, pe[id].pmem_base_addr | (dst & (pe[id].pmem_size -+ - 1)) | PE_MEM_ACCESS_IMEM, src, len); -+} -+ -+/* Reads PE internal program memory (IMEM) from the host -+ * through indirect access registers. -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., TMU3_ID) -+ * @param[in] addr PMEM read address (must be aligned on size) -+ * @param[in] size Number of bytes to read (maximum 4, must not -+ * cross 32bit boundaries) -+ * @return the data read (in PE endianness, i.e BE). -+ */ -+u32 pe_pmem_read(int id, u32 addr, u8 size) -+{ -+ u32 offset = addr & 0x3; -+ u32 mask = 0xffffffff >> ((4 - size) << 3); -+ u32 val; -+ -+ addr = pe[id].pmem_base_addr | ((addr & ~0x3) & (pe[id].pmem_size - 1)) -+ | PE_MEM_ACCESS_IMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size); -+ -+ writel(addr, pe[id].mem_access_addr); -+ val = be32_to_cpu(readl(pe[id].mem_access_rdata)); -+ -+ return (val >> (offset << 3)) & mask; -+} -+ -+/* Writes PE internal data memory (DMEM) from the host -+ * through indirect access registers. -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., UTIL_ID) -+ * @param[in] addr DMEM write address (must be aligned on size) -+ * @param[in] val Value to write (in PE endianness, i.e BE) -+ * @param[in] size Number of bytes to write (maximum 4, must not -+ * cross 32bit boundaries) -+ */ -+void pe_dmem_write(int id, u32 val, u32 addr, u8 size) -+{ -+ u32 offset = addr & 0x3; -+ -+ addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_WRITE | -+ PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size); -+ -+ /* Indirect access interface is byte swapping data being written */ -+ writel(cpu_to_be32(val << (offset << 3)), pe[id].mem_access_wdata); -+ writel(addr, pe[id].mem_access_addr); -+} -+ -+/* Reads PE internal data memory (DMEM) from the host -+ * through indirect access registers. -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., UTIL_ID) -+ * @param[in] addr DMEM read address (must be aligned on size) -+ * @param[in] size Number of bytes to read (maximum 4, must not -+ * cross 32bit boundaries) -+ * @return the data read (in PE endianness, i.e BE). -+ */ -+u32 pe_dmem_read(int id, u32 addr, u8 size) -+{ -+ u32 offset = addr & 0x3; -+ u32 mask = 0xffffffff >> ((4 - size) << 3); -+ u32 val; -+ -+ addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_DMEM | -+ PE_MEM_ACCESS_BYTE_ENABLE(offset, size); -+ -+ writel(addr, pe[id].mem_access_addr); -+ -+ /* Indirect access interface is byte swapping data being read */ -+ val = be32_to_cpu(readl(pe[id].mem_access_rdata)); -+ -+ return (val >> (offset << 3)) & mask; -+} -+ -+/* This function is used to write to CLASS internal bus peripherals (ccu, -+ * pe-lem) from the host -+ * through indirect access registers. -+ * @param[in] val value to write -+ * @param[in] addr Address to write to (must be aligned on size) -+ * @param[in] size Number of bytes to write (1, 2 or 4) -+ * -+ */ -+void class_bus_write(u32 val, u32 addr, u8 size) -+{ -+ u32 offset = addr & 0x3; -+ -+ writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE); -+ -+ addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | PE_MEM_ACCESS_WRITE | -+ (size << 24); -+ -+ writel(cpu_to_be32(val << (offset << 3)), CLASS_BUS_ACCESS_WDATA); -+ writel(addr, CLASS_BUS_ACCESS_ADDR); -+} -+ -+/* Reads from CLASS internal bus peripherals (ccu, pe-lem) from the host -+ * through indirect access registers. -+ * @param[in] addr Address to read from (must be aligned on size) -+ * @param[in] size Number of bytes to read (1, 2 or 4) -+ * @return the read data -+ * -+ */ -+u32 class_bus_read(u32 addr, u8 size) -+{ -+ u32 offset = addr & 0x3; -+ u32 mask = 0xffffffff >> ((4 - size) << 3); -+ u32 val; -+ -+ writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE); -+ -+ addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | (size << 24); -+ -+ writel(addr, CLASS_BUS_ACCESS_ADDR); -+ val = be32_to_cpu(readl(CLASS_BUS_ACCESS_RDATA)); -+ -+ return (val >> (offset << 3)) & mask; -+} -+ -+/* Writes data to the cluster memory (PE_LMEM) -+ * @param[in] dst PE LMEM destination address (must be 32bit aligned) -+ * @param[in] src Buffer source address -+ * @param[in] len Number of bytes to copy -+ */ -+void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len) -+{ -+ u32 len32 = len >> 2; -+ int i; -+ -+ for (i = 0; i < len32; i++, src += 4, dst += 4) -+ class_bus_write(*(u32 *)src, dst, 4); -+ -+ if (len & 0x2) { -+ class_bus_write(*(u16 *)src, dst, 2); -+ src += 2; -+ dst += 2; -+ } -+ -+ if (len & 0x1) { -+ class_bus_write(*(u8 *)src, dst, 1); -+ src++; -+ dst++; -+ } -+} -+ -+/* Writes value to the cluster memory (PE_LMEM) -+ * @param[in] dst PE LMEM destination address (must be 32bit aligned) -+ * @param[in] val Value to write -+ * @param[in] len Number of bytes to write -+ */ -+void class_pe_lmem_memset(u32 dst, int val, unsigned int len) -+{ -+ u32 len32 = len >> 2; -+ int i; -+ -+ val = val | (val << 8) | (val << 16) | (val << 24); -+ -+ for (i = 0; i < len32; i++, dst += 4) -+ class_bus_write(val, dst, 4); -+ -+ if (len & 0x2) { -+ class_bus_write(val, dst, 2); -+ dst += 2; -+ } -+ -+ if (len & 0x1) { -+ class_bus_write(val, dst, 1); -+ dst++; -+ } -+} -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ -+/* Writes UTIL program memory (DDR) from the host. -+ * -+ * @param[in] addr Address to write (virtual, must be aligned on size) -+ * @param[in] val Value to write (in PE endianness, i.e BE) -+ * @param[in] size Number of bytes to write (2 or 4) -+ */ -+static void util_pmem_write(u32 val, void *addr, u8 size) -+{ -+ void *addr64 = (void *)((unsigned long)addr & ~0x7); -+ unsigned long off = 8 - ((unsigned long)addr & 0x7) - size; -+ -+ /* -+ * IMEM should be loaded as a 64bit swapped value in a 64bit aligned -+ * location -+ */ -+ if (size == 4) -+ writel(be32_to_cpu(val), addr64 + off); -+ else -+ writew(be16_to_cpu((u16)val), addr64 + off); -+} -+ -+/* Writes a buffer to UTIL program memory (DDR) from the host. -+ * -+ * @param[in] dst Address to write (virtual, must be at least 16bit -+ * aligned) -+ * @param[in] src Buffer to write (in PE endianness, i.e BE, must have -+ * same alignment as dst) -+ * @param[in] len Number of bytes to write (must be at least 16bit -+ * aligned) -+ */ -+static void util_pmem_memcpy(void *dst, const void *src, unsigned int len) -+{ -+ unsigned int len32; -+ int i; -+ -+ if ((unsigned long)src & 0x2) { -+ util_pmem_write(*(u16 *)src, dst, 2); -+ src += 2; -+ dst += 2; -+ len -= 2; -+ } -+ -+ len32 = len >> 2; -+ -+ for (i = 0; i < len32; i++, dst += 4, src += 4) -+ util_pmem_write(*(u32 *)src, dst, 4); -+ -+ if (len & 0x2) -+ util_pmem_write(*(u16 *)src, dst, len & 0x2); -+} -+#endif -+ -+/* Loads an elf section into pmem -+ * Code needs to be at least 16bit aligned and only PROGBITS sections are -+ * supported -+ * -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, ..., -+ * TMU3_ID) -+ * @param[in] data pointer to the elf firmware -+ * @param[in] shdr pointer to the elf section header -+ * -+ */ -+static int pe_load_pmem_section(int id, const void *data, -+ struct elf32_shdr *shdr) -+{ -+ u32 offset = be32_to_cpu(shdr->sh_offset); -+ u32 addr = be32_to_cpu(shdr->sh_addr); -+ u32 size = be32_to_cpu(shdr->sh_size); -+ u32 type = be32_to_cpu(shdr->sh_type); -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ if (id == UTIL_ID) { -+ pr_err("%s: unsupported pmem section for UTIL\n", -+ __func__); -+ return -EINVAL; -+ } -+#endif -+ -+ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) { -+ pr_err( -+ "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n" -+ , __func__, addr, (unsigned long)data + offset); -+ -+ return -EINVAL; -+ } -+ -+ if (addr & 0x1) { -+ pr_err("%s: load address(%x) is not 16bit aligned\n", -+ __func__, addr); -+ return -EINVAL; -+ } -+ -+ if (size & 0x1) { -+ pr_err("%s: load size(%x) is not 16bit aligned\n", -+ __func__, size); -+ return -EINVAL; -+ } -+ -+ switch (type) { -+ case SHT_PROGBITS: -+ pe_pmem_memcpy_to32(id, addr, data + offset, size); -+ -+ break; -+ -+ default: -+ pr_err("%s: unsupported section type(%x)\n", __func__, -+ type); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* Loads an elf section into dmem -+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly -+ * initialized to 0 -+ * -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., UTIL_ID) -+ * @param[in] data pointer to the elf firmware -+ * @param[in] shdr pointer to the elf section header -+ * -+ */ -+static int pe_load_dmem_section(int id, const void *data, -+ struct elf32_shdr *shdr) -+{ -+ u32 offset = be32_to_cpu(shdr->sh_offset); -+ u32 addr = be32_to_cpu(shdr->sh_addr); -+ u32 size = be32_to_cpu(shdr->sh_size); -+ u32 type = be32_to_cpu(shdr->sh_type); -+ u32 size32 = size >> 2; -+ int i; -+ -+ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) { -+ pr_err( -+ "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n", -+ __func__, addr, (unsigned long)data + offset); -+ -+ return -EINVAL; -+ } -+ -+ if (addr & 0x3) { -+ pr_err("%s: load address(%x) is not 32bit aligned\n", -+ __func__, addr); -+ return -EINVAL; -+ } -+ -+ switch (type) { -+ case SHT_PROGBITS: -+ pe_dmem_memcpy_to32(id, addr, data + offset, size); -+ break; -+ -+ case SHT_NOBITS: -+ for (i = 0; i < size32; i++, addr += 4) -+ pe_dmem_write(id, 0, addr, 4); -+ -+ if (size & 0x3) -+ pe_dmem_write(id, 0, addr, size & 0x3); -+ -+ break; -+ -+ default: -+ pr_err("%s: unsupported section type(%x)\n", __func__, -+ type); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* Loads an elf section into DDR -+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly -+ * initialized to 0 -+ * -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., UTIL_ID) -+ * @param[in] data pointer to the elf firmware -+ * @param[in] shdr pointer to the elf section header -+ * -+ */ -+static int pe_load_ddr_section(int id, const void *data, -+ struct elf32_shdr *shdr, -+ struct device *dev) { -+ u32 offset = be32_to_cpu(shdr->sh_offset); -+ u32 addr = be32_to_cpu(shdr->sh_addr); -+ u32 size = be32_to_cpu(shdr->sh_size); -+ u32 type = be32_to_cpu(shdr->sh_type); -+ u32 flags = be32_to_cpu(shdr->sh_flags); -+ -+ switch (type) { -+ case SHT_PROGBITS: -+ if (flags & SHF_EXECINSTR) { -+ if (id <= CLASS_MAX_ID) { -+ /* DO the loading only once in DDR */ -+ if (id == CLASS0_ID) { -+ pr_err( -+ "%s: load address(%x) and elf file address(%lx) rcvd\n", -+ __func__, addr, -+ (unsigned long)data + offset); -+ if (((unsigned long)(data + offset) -+ & 0x3) != (addr & 0x3)) { -+ pr_err( -+ "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n" -+ , __func__, addr, -+ (unsigned long)data + offset); -+ -+ return -EINVAL; -+ } -+ -+ if (addr & 0x1) { -+ pr_err( -+ "%s: load address(%x) is not 16bit aligned\n" -+ , __func__, addr); -+ return -EINVAL; -+ } -+ -+ if (size & 0x1) { -+ pr_err( -+ "%s: load length(%x) is not 16bit aligned\n" -+ , __func__, size); -+ return -EINVAL; -+ } -+ memcpy(DDR_PHYS_TO_VIRT( -+ DDR_PFE_TO_PHYS(addr)), -+ data + offset, size); -+ } -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ } else if (id == UTIL_ID) { -+ if (((unsigned long)(data + offset) & 0x3) -+ != (addr & 0x3)) { -+ pr_err( -+ "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n" -+ , __func__, addr, -+ (unsigned long)data + offset); -+ -+ return -EINVAL; -+ } -+ -+ if (addr & 0x1) { -+ pr_err( -+ "%s: load address(%x) is not 16bit aligned\n" -+ , __func__, addr); -+ return -EINVAL; -+ } -+ -+ if (size & 0x1) { -+ pr_err( -+ "%s: load length(%x) is not 16bit aligned\n" -+ , __func__, size); -+ return -EINVAL; -+ } -+ -+ util_pmem_memcpy(DDR_PHYS_TO_VIRT( -+ DDR_PFE_TO_PHYS(addr)), -+ data + offset, size); -+ } -+#endif -+ } else { -+ pr_err( -+ "%s: unsupported ddr section type(%x) for PE(%d)\n" -+ , __func__, type, id); -+ return -EINVAL; -+ } -+ -+ } else { -+ memcpy(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), data -+ + offset, size); -+ } -+ -+ break; -+ -+ case SHT_NOBITS: -+ memset(DDR_PHYS_TO_VIRT(DDR_PFE_TO_PHYS(addr)), 0, size); -+ -+ break; -+ -+ default: -+ pr_err("%s: unsupported section type(%x)\n", __func__, -+ type); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* Loads an elf section into pe lmem -+ * Data needs to be at least 32bit aligned, NOBITS sections are correctly -+ * initialized to 0 -+ * -+ * @param[in] id PE identification (CLASS0_ID,..., CLASS5_ID) -+ * @param[in] data pointer to the elf firmware -+ * @param[in] shdr pointer to the elf section header -+ * -+ */ -+static int pe_load_pe_lmem_section(int id, const void *data, -+ struct elf32_shdr *shdr) -+{ -+ u32 offset = be32_to_cpu(shdr->sh_offset); -+ u32 addr = be32_to_cpu(shdr->sh_addr); -+ u32 size = be32_to_cpu(shdr->sh_size); -+ u32 type = be32_to_cpu(shdr->sh_type); -+ -+ if (id > CLASS_MAX_ID) { -+ pr_err( -+ "%s: unsupported pe-lmem section type(%x) for PE(%d)\n", -+ __func__, type, id); -+ return -EINVAL; -+ } -+ -+ if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3)) { -+ pr_err( -+ "%s: load address(%x) and elf file address(%lx) don't have the same alignment\n", -+ __func__, addr, (unsigned long)data + offset); -+ -+ return -EINVAL; -+ } -+ -+ if (addr & 0x3) { -+ pr_err("%s: load address(%x) is not 32bit aligned\n", -+ __func__, addr); -+ return -EINVAL; -+ } -+ -+ switch (type) { -+ case SHT_PROGBITS: -+ class_pe_lmem_memcpy_to32(addr, data + offset, size); -+ break; -+ -+ case SHT_NOBITS: -+ class_pe_lmem_memset(addr, 0, size); -+ break; -+ -+ default: -+ pr_err("%s: unsupported section type(%x)\n", __func__, -+ type); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+/* Loads an elf section into a PE -+ * For now only supports loading a section to dmem (all PE's), pmem (class and -+ * tmu PE's), -+ * DDDR (util PE code) -+ * -+ * @param[in] id PE identification (CLASS0_ID, ..., TMU0_ID, -+ * ..., UTIL_ID) -+ * @param[in] data pointer to the elf firmware -+ * @param[in] shdr pointer to the elf section header -+ * -+ */ -+int pe_load_elf_section(int id, const void *data, struct elf32_shdr *shdr, -+ struct device *dev) { -+ u32 addr = be32_to_cpu(shdr->sh_addr); -+ u32 size = be32_to_cpu(shdr->sh_size); -+ -+ if (IS_DMEM(addr, size)) -+ return pe_load_dmem_section(id, data, shdr); -+ else if (IS_PMEM(addr, size)) -+ return pe_load_pmem_section(id, data, shdr); -+ else if (IS_PFE_LMEM(addr, size)) -+ return 0; -+ else if (IS_PHYS_DDR(addr, size)) -+ return pe_load_ddr_section(id, data, shdr, dev); -+ else if (IS_PE_LMEM(addr, size)) -+ return pe_load_pe_lmem_section(id, data, shdr); -+ -+ pr_err("%s: unsupported memory range(%x)\n", __func__, -+ addr); -+ return 0; -+} -+ -+/**************************** BMU ***************************/ -+ -+/* Initializes a BMU block. -+ * @param[in] base BMU block base address -+ * @param[in] cfg BMU configuration -+ */ -+void bmu_init(void *base, struct BMU_CFG *cfg) -+{ -+ bmu_disable(base); -+ -+ bmu_set_config(base, cfg); -+ -+ bmu_reset(base); -+} -+ -+/* Resets a BMU block. -+ * @param[in] base BMU block base address -+ */ -+void bmu_reset(void *base) -+{ -+ writel(CORE_SW_RESET, base + BMU_CTRL); -+ -+ /* Wait for self clear */ -+ while (readl(base + BMU_CTRL) & CORE_SW_RESET) -+ ; -+} -+ -+/* Enabled a BMU block. -+ * @param[in] base BMU block base address -+ */ -+void bmu_enable(void *base) -+{ -+ writel(CORE_ENABLE, base + BMU_CTRL); -+} -+ -+/* Disables a BMU block. -+ * @param[in] base BMU block base address -+ */ -+void bmu_disable(void *base) -+{ -+ writel(CORE_DISABLE, base + BMU_CTRL); -+} -+ -+/* Sets the configuration of a BMU block. -+ * @param[in] base BMU block base address -+ * @param[in] cfg BMU configuration -+ */ -+void bmu_set_config(void *base, struct BMU_CFG *cfg) -+{ -+ writel(cfg->baseaddr, base + BMU_UCAST_BASE_ADDR); -+ writel(cfg->count & 0xffff, base + BMU_UCAST_CONFIG); -+ writel(cfg->size & 0xffff, base + BMU_BUF_SIZE); -+ -+ /* Interrupts are never used */ -+ writel(cfg->low_watermark, base + BMU_LOW_WATERMARK); -+ writel(cfg->high_watermark, base + BMU_HIGH_WATERMARK); -+ writel(0x0, base + BMU_INT_ENABLE); -+} -+ -+/**************************** MTIP GEMAC ***************************/ -+ -+/* Enable Rx Checksum Engine. With this enabled, Frame with bad IP, -+ * TCP or UDP checksums are discarded -+ * -+ * @param[in] base GEMAC base address. -+ */ -+void gemac_enable_rx_checksum_offload(void *base) -+{ -+ /*Do not find configuration to do this */ -+} -+ -+/* Disable Rx Checksum Engine. -+ * -+ * @param[in] base GEMAC base address. -+ */ -+void gemac_disable_rx_checksum_offload(void *base) -+{ -+ /*Do not find configuration to do this */ -+} -+ -+/* GEMAC set speed. -+ * @param[in] base GEMAC base address -+ * @param[in] speed GEMAC speed (10, 100 or 1000 Mbps) -+ */ -+void gemac_set_speed(void *base, enum mac_speed gem_speed) -+{ -+ u32 ecr = readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_SPEED; -+ u32 rcr = readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_RMII_10T; -+ -+ switch (gem_speed) { -+ case SPEED_10M: -+ rcr |= EMAC_RCNTRL_RMII_10T; -+ break; -+ -+ case SPEED_1000M: -+ ecr |= EMAC_ECNTRL_SPEED; -+ break; -+ -+ case SPEED_100M: -+ default: -+ /*It is in 100M mode */ -+ break; -+ } -+ writel(ecr, (base + EMAC_ECNTRL_REG)); -+ writel(rcr, (base + EMAC_RCNTRL_REG)); -+} -+ -+/* GEMAC set duplex. -+ * @param[in] base GEMAC base address -+ * @param[in] duplex GEMAC duplex mode (Full, Half) -+ */ -+void gemac_set_duplex(void *base, int duplex) -+{ -+ if (duplex == DUPLEX_HALF) { -+ writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_FDEN, base -+ + EMAC_TCNTRL_REG); -+ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_DRT, (base -+ + EMAC_RCNTRL_REG)); -+ } else{ -+ writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_FDEN, base -+ + EMAC_TCNTRL_REG); -+ writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_DRT, (base -+ + EMAC_RCNTRL_REG)); -+ } -+} -+ -+/* GEMAC set mode. -+ * @param[in] base GEMAC base address -+ * @param[in] mode GEMAC operation mode (MII, RMII, RGMII, SGMII) -+ */ -+void gemac_set_mode(void *base, int mode) -+{ -+ u32 val = readl(base + EMAC_RCNTRL_REG); -+ -+ /*Remove loopbank*/ -+ val &= ~EMAC_RCNTRL_LOOP; -+ -+ /* Enable flow control and MII mode.PFE firmware always expects -+ CRC should be forwarded by MAC to validate CRC in software.*/ -+ val |= (EMAC_RCNTRL_FCE | EMAC_RCNTRL_MII_MODE); -+ -+ writel(val, base + EMAC_RCNTRL_REG); -+} -+ -+/* GEMAC enable function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_enable(void *base) -+{ -+ writel(readl(base + EMAC_ECNTRL_REG) | EMAC_ECNTRL_ETHER_EN, base + -+ EMAC_ECNTRL_REG); -+} -+ -+/* GEMAC disable function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_disable(void *base) -+{ -+ writel(readl(base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_ETHER_EN, base + -+ EMAC_ECNTRL_REG); -+} -+ -+/* GEMAC TX disable function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_tx_disable(void *base) -+{ -+ writel(readl(base + EMAC_TCNTRL_REG) | EMAC_TCNTRL_GTS, base + -+ EMAC_TCNTRL_REG); -+} -+ -+void gemac_tx_enable(void *base) -+{ -+ writel(readl(base + EMAC_TCNTRL_REG) & ~EMAC_TCNTRL_GTS, base + -+ EMAC_TCNTRL_REG); -+} -+ -+/* Sets the hash register of the MAC. -+ * This register is used for matching unicast and multicast frames. -+ * -+ * @param[in] base GEMAC base address. -+ * @param[in] hash 64-bit hash to be configured. -+ */ -+void gemac_set_hash(void *base, struct pfe_mac_addr *hash) -+{ -+ writel(hash->bottom, base + EMAC_GALR); -+ writel(hash->top, base + EMAC_GAUR); -+} -+ -+void gemac_set_laddrN(void *base, struct pfe_mac_addr *address, -+ unsigned int entry_index) -+{ -+ if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX)) -+ return; -+ -+ entry_index = entry_index - 1; -+ if (entry_index < 1) { -+ writel(htonl(address->bottom), base + EMAC_PHY_ADDR_LOW); -+ writel((htonl(address->top) | 0x8808), base + -+ EMAC_PHY_ADDR_HIGH); -+ } else { -+ writel(htonl(address->bottom), base + ((entry_index - 1) * 8) -+ + EMAC_SMAC_0_0); -+ writel((htonl(address->top) | 0x8808), base + ((entry_index - -+ 1) * 8) + EMAC_SMAC_0_1); -+ } -+} -+ -+void gemac_clear_laddrN(void *base, unsigned int entry_index) -+{ -+ if ((entry_index < 1) || (entry_index > EMAC_SPEC_ADDR_MAX)) -+ return; -+ -+ entry_index = entry_index - 1; -+ if (entry_index < 1) { -+ writel(0, base + EMAC_PHY_ADDR_LOW); -+ writel(0, base + EMAC_PHY_ADDR_HIGH); -+ } else { -+ writel(0, base + ((entry_index - 1) * 8) + EMAC_SMAC_0_0); -+ writel(0, base + ((entry_index - 1) * 8) + EMAC_SMAC_0_1); -+ } -+} -+ -+/* Set the loopback mode of the MAC. This can be either no loopback for -+ * normal operation, local loopback through MAC internal loopback module or PHY -+ * loopback for external loopback through a PHY. This asserts the external -+ * loop pin. -+ * -+ * @param[in] base GEMAC base address. -+ * @param[in] gem_loop Loopback mode to be enabled. LB_LOCAL - MAC -+ * Loopback, -+ * LB_EXT - PHY Loopback. -+ */ -+void gemac_set_loop(void *base, enum mac_loop gem_loop) -+{ -+ pr_info("%s()\n", __func__); -+ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_LOOP, (base + -+ EMAC_RCNTRL_REG)); -+} -+ -+/* GEMAC allow frames -+ * @param[in] base GEMAC base address -+ */ -+void gemac_enable_copy_all(void *base) -+{ -+ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_PROM, (base + -+ EMAC_RCNTRL_REG)); -+} -+ -+/* GEMAC do not allow frames -+ * @param[in] base GEMAC base address -+ */ -+void gemac_disable_copy_all(void *base) -+{ -+ writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_PROM, (base + -+ EMAC_RCNTRL_REG)); -+} -+ -+/* GEMAC allow broadcast function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_allow_broadcast(void *base) -+{ -+ writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_BC_REJ, base + -+ EMAC_RCNTRL_REG); -+} -+ -+/* GEMAC no broadcast function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_no_broadcast(void *base) -+{ -+ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_BC_REJ, base + -+ EMAC_RCNTRL_REG); -+} -+ -+/* GEMAC enable 1536 rx function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_enable_1536_rx(void *base) -+{ -+ /* Set 1536 as Maximum frame length */ -+ writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK) -+ | (1536 << 16), base + EMAC_RCNTRL_REG); -+} -+ -+/* GEMAC set rx Max frame length. -+ * @param[in] base GEMAC base address -+ * @param[in] mtu new mtu -+ */ -+void gemac_set_rx_max_fl(void *base, int mtu) -+{ -+ /* Set mtu as Maximum frame length */ -+ writel((readl(base + EMAC_RCNTRL_REG) & PFE_RCR_MAX_FL_MASK) -+ | (mtu << 16), base + EMAC_RCNTRL_REG); -+} -+ -+/* GEMAC enable stacked vlan function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_enable_stacked_vlan(void *base) -+{ -+ /* MTIP doesn't support stacked vlan */ -+} -+ -+/* GEMAC enable pause rx function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_enable_pause_rx(void *base) -+{ -+ writel(readl(base + EMAC_RCNTRL_REG) | EMAC_RCNTRL_FCE, -+ base + EMAC_RCNTRL_REG); -+} -+ -+/* GEMAC disable pause rx function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_disable_pause_rx(void *base) -+{ -+ writel(readl(base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_FCE, -+ base + EMAC_RCNTRL_REG); -+} -+ -+/* GEMAC enable pause tx function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_enable_pause_tx(void *base) -+{ -+ writel(EMAC_RX_SECTION_EMPTY_V, base + EMAC_RX_SECTION_EMPTY); -+} -+ -+/* GEMAC disable pause tx function. -+ * @param[in] base GEMAC base address -+ */ -+void gemac_disable_pause_tx(void *base) -+{ -+ writel(0x0, base + EMAC_RX_SECTION_EMPTY); -+} -+ -+/* GEMAC wol configuration -+ * @param[in] base GEMAC base address -+ * @param[in] wol_conf WoL register configuration -+ */ -+void gemac_set_wol(void *base, u32 wol_conf) -+{ -+ u32 val = readl(base + EMAC_ECNTRL_REG); -+ -+ if (wol_conf) -+ val |= (EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP); -+ else -+ val &= ~(EMAC_ECNTRL_MAGIC_ENA | EMAC_ECNTRL_SLEEP); -+ writel(val, base + EMAC_ECNTRL_REG); -+} -+ -+/* Sets Gemac bus width to 64bit -+ * @param[in] base GEMAC base address -+ * @param[in] width gemac bus width to be set possible values are 32/64/128 -+ */ -+void gemac_set_bus_width(void *base, int width) -+{ -+} -+ -+/* Sets Gemac configuration. -+ * @param[in] base GEMAC base address -+ * @param[in] cfg GEMAC configuration -+ */ -+void gemac_set_config(void *base, struct gemac_cfg *cfg) -+{ -+ /*GEMAC config taken from VLSI */ -+ writel(0x00000004, base + EMAC_TFWR_STR_FWD); -+ writel(0x00000005, base + EMAC_RX_SECTION_FULL); -+ -+ if (pfe_errata_a010897) -+ writel(0x0000076c, base + EMAC_TRUNC_FL); -+ else -+ writel(0x00003fff, base + EMAC_TRUNC_FL); -+ -+ writel(0x00000030, base + EMAC_TX_SECTION_EMPTY); -+ writel(0x00000000, base + EMAC_MIB_CTRL_STS_REG); -+ -+ gemac_set_mode(base, cfg->mode); -+ -+ gemac_set_speed(base, cfg->speed); -+ -+ gemac_set_duplex(base, cfg->duplex); -+} -+ -+/**************************** GPI ***************************/ -+ -+/* Initializes a GPI block. -+ * @param[in] base GPI base address -+ * @param[in] cfg GPI configuration -+ */ -+void gpi_init(void *base, struct gpi_cfg *cfg) -+{ -+ gpi_reset(base); -+ -+ gpi_disable(base); -+ -+ gpi_set_config(base, cfg); -+} -+ -+/* Resets a GPI block. -+ * @param[in] base GPI base address -+ */ -+void gpi_reset(void *base) -+{ -+ writel(CORE_SW_RESET, base + GPI_CTRL); -+} -+ -+/* Enables a GPI block. -+ * @param[in] base GPI base address -+ */ -+void gpi_enable(void *base) -+{ -+ writel(CORE_ENABLE, base + GPI_CTRL); -+} -+ -+/* Disables a GPI block. -+ * @param[in] base GPI base address -+ */ -+void gpi_disable(void *base) -+{ -+ writel(CORE_DISABLE, base + GPI_CTRL); -+} -+ -+/* Sets the configuration of a GPI block. -+ * @param[in] base GPI base address -+ * @param[in] cfg GPI configuration -+ */ -+void gpi_set_config(void *base, struct gpi_cfg *cfg) -+{ -+ writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL), base -+ + GPI_LMEM_ALLOC_ADDR); -+ writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_FREE_CTRL), base -+ + GPI_LMEM_FREE_ADDR); -+ writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_ALLOC_CTRL), base -+ + GPI_DDR_ALLOC_ADDR); -+ writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL), base -+ + GPI_DDR_FREE_ADDR); -+ writel(CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR), base + GPI_CLASS_ADDR); -+ writel(DDR_HDR_SIZE, base + GPI_DDR_DATA_OFFSET); -+ writel(LMEM_HDR_SIZE, base + GPI_LMEM_DATA_OFFSET); -+ writel(0, base + GPI_LMEM_SEC_BUF_DATA_OFFSET); -+ writel(0, base + GPI_DDR_SEC_BUF_DATA_OFFSET); -+ writel((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE, base + GPI_HDR_SIZE); -+ writel((DDR_BUF_SIZE << 16) | LMEM_BUF_SIZE, base + GPI_BUF_SIZE); -+ -+ writel(((cfg->lmem_rtry_cnt << 16) | (GPI_DDR_BUF_EN << 1) | -+ GPI_LMEM_BUF_EN), base + GPI_RX_CONFIG); -+ writel(cfg->tmlf_txthres, base + GPI_TMLF_TX); -+ writel(cfg->aseq_len, base + GPI_DTX_ASEQ); -+ writel(1, base + GPI_TOE_CHKSUM_EN); -+ -+ if (cfg->mtip_pause_reg) { -+ writel(cfg->mtip_pause_reg, base + GPI_CSR_MTIP_PAUSE_REG); -+ writel(EGPI_PAUSE_TIME, base + GPI_TX_PAUSE_TIME); -+ } -+} -+ -+/**************************** CLASSIFIER ***************************/ -+ -+/* Initializes CLASSIFIER block. -+ * @param[in] cfg CLASSIFIER configuration -+ */ -+void class_init(struct class_cfg *cfg) -+{ -+ class_reset(); -+ -+ class_disable(); -+ -+ class_set_config(cfg); -+} -+ -+/* Resets CLASSIFIER block. -+ * -+ */ -+void class_reset(void) -+{ -+ writel(CORE_SW_RESET, CLASS_TX_CTRL); -+} -+ -+/* Enables all CLASS-PE's cores. -+ * -+ */ -+void class_enable(void) -+{ -+ writel(CORE_ENABLE, CLASS_TX_CTRL); -+} -+ -+/* Disables all CLASS-PE's cores. -+ * -+ */ -+void class_disable(void) -+{ -+ writel(CORE_DISABLE, CLASS_TX_CTRL); -+} -+ -+/* -+ * Sets the configuration of the CLASSIFIER block. -+ * @param[in] cfg CLASSIFIER configuration -+ */ -+void class_set_config(struct class_cfg *cfg) -+{ -+ u32 val; -+ -+ /* Initialize route table */ -+ if (!cfg->resume) -+ memset(DDR_PHYS_TO_VIRT(cfg->route_table_baseaddr), 0, (1 << -+ cfg->route_table_hash_bits) * CLASS_ROUTE_SIZE); -+ -+#if !defined(LS1012A_PFE_RESET_WA) -+ writel(cfg->pe_sys_clk_ratio, CLASS_PE_SYS_CLK_RATIO); -+#endif -+ -+ writel((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE, CLASS_HDR_SIZE); -+ writel(LMEM_BUF_SIZE, CLASS_LMEM_BUF_SIZE); -+ writel(CLASS_ROUTE_ENTRY_SIZE(CLASS_ROUTE_SIZE) | -+ CLASS_ROUTE_HASH_SIZE(cfg->route_table_hash_bits), -+ CLASS_ROUTE_HASH_ENTRY_SIZE); -+ writel(HIF_PKT_CLASS_EN | HIF_PKT_OFFSET(sizeof(struct hif_hdr)), -+ CLASS_HIF_PARSE); -+ -+ val = HASH_CRC_PORT_IP | QB2BUS_LE; -+ -+#if defined(CONFIG_IP_ALIGNED) -+ val |= IP_ALIGNED; -+#endif -+ -+ /* -+ * Class PE packet steering will only work if TOE mode, bridge fetch or -+ * route fetch are enabled (see class/qb_fet.v). Route fetch would -+ * trigger additional memory copies (likely from DDR because of hash -+ * table size, which cannot be reduced because PE software still -+ * relies on hash value computed in HW), so when not in TOE mode we -+ * simply enable HW bridge fetch even though we don't use it. -+ */ -+ if (cfg->toe_mode) -+ val |= CLASS_TOE; -+ else -+ val |= HW_BRIDGE_FETCH; -+ -+ writel(val, CLASS_ROUTE_MULTI); -+ -+ writel(DDR_PHYS_TO_PFE(cfg->route_table_baseaddr), -+ CLASS_ROUTE_TABLE_BASE); -+ writel(CLASS_PE0_RO_DM_ADDR0_VAL, CLASS_PE0_RO_DM_ADDR0); -+ writel(CLASS_PE0_RO_DM_ADDR1_VAL, CLASS_PE0_RO_DM_ADDR1); -+ writel(CLASS_PE0_QB_DM_ADDR0_VAL, CLASS_PE0_QB_DM_ADDR0); -+ writel(CLASS_PE0_QB_DM_ADDR1_VAL, CLASS_PE0_QB_DM_ADDR1); -+ writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR), CLASS_TM_INQ_ADDR); -+ -+ writel(23, CLASS_AFULL_THRES); -+ writel(23, CLASS_TSQ_FIFO_THRES); -+ -+ writel(24, CLASS_MAX_BUF_CNT); -+ writel(24, CLASS_TSQ_MAX_CNT); -+} -+ -+/**************************** TMU ***************************/ -+ -+void tmu_reset(void) -+{ -+ writel(SW_RESET, TMU_CTRL); -+} -+ -+/* Initializes TMU block. -+ * @param[in] cfg TMU configuration -+ */ -+void tmu_init(struct tmu_cfg *cfg) -+{ -+ int q, phyno; -+ -+ tmu_disable(0xF); -+ mdelay(10); -+ -+#if !defined(LS1012A_PFE_RESET_WA) -+ /* keep in soft reset */ -+ writel(SW_RESET, TMU_CTRL); -+#endif -+ writel(0x3, TMU_SYS_GENERIC_CONTROL); -+ writel(750, TMU_INQ_WATERMARK); -+ writel(CBUS_VIRT_TO_PFE(EGPI1_BASE_ADDR + -+ GPI_INQ_PKTPTR), TMU_PHY0_INQ_ADDR); -+ writel(CBUS_VIRT_TO_PFE(EGPI2_BASE_ADDR + -+ GPI_INQ_PKTPTR), TMU_PHY1_INQ_ADDR); -+ writel(CBUS_VIRT_TO_PFE(HGPI_BASE_ADDR + -+ GPI_INQ_PKTPTR), TMU_PHY3_INQ_ADDR); -+ writel(CBUS_VIRT_TO_PFE(HIF_NOCPY_RX_INQ0_PKTPTR), TMU_PHY4_INQ_ADDR); -+ writel(CBUS_VIRT_TO_PFE(UTIL_INQ_PKTPTR), TMU_PHY5_INQ_ADDR); -+ writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL), -+ TMU_BMU_INQ_ADDR); -+ -+ writel(0x3FF, TMU_TDQ0_SCH_CTRL); /* -+ * enabling all 10 -+ * schedulers [9:0] of each TDQ -+ */ -+ writel(0x3FF, TMU_TDQ1_SCH_CTRL); -+ writel(0x3FF, TMU_TDQ3_SCH_CTRL); -+ -+#if !defined(LS1012A_PFE_RESET_WA) -+ writel(cfg->pe_sys_clk_ratio, TMU_PE_SYS_CLK_RATIO); -+#endif -+ -+#if !defined(LS1012A_PFE_RESET_WA) -+ writel(DDR_PHYS_TO_PFE(cfg->llm_base_addr), TMU_LLM_BASE_ADDR); -+ /* Extra packet pointers will be stored from this address onwards */ -+ -+ writel(cfg->llm_queue_len, TMU_LLM_QUE_LEN); -+ writel(5, TMU_TDQ_IIFG_CFG); -+ writel(DDR_BUF_SIZE, TMU_BMU_BUF_SIZE); -+ -+ writel(0x0, TMU_CTRL); -+ -+ /* MEM init */ -+ pr_info("%s: mem init\n", __func__); -+ writel(MEM_INIT, TMU_CTRL); -+ -+ while (!(readl(TMU_CTRL) & MEM_INIT_DONE)) -+ ; -+ -+ /* LLM init */ -+ pr_info("%s: lmem init\n", __func__); -+ writel(LLM_INIT, TMU_CTRL); -+ -+ while (!(readl(TMU_CTRL) & LLM_INIT_DONE)) -+ ; -+#endif -+ /* set up each queue for tail drop */ -+ for (phyno = 0; phyno < 4; phyno++) { -+ if (phyno == 2) -+ continue; -+ for (q = 0; q < 16; q++) { -+ u32 qdepth; -+ -+ writel((phyno << 8) | q, TMU_TEQ_CTRL); -+ writel(1 << 22, TMU_TEQ_QCFG); /*Enable tail drop */ -+ -+ if (phyno == 3) -+ qdepth = DEFAULT_TMU3_QDEPTH; -+ else -+ qdepth = (q == 0) ? DEFAULT_Q0_QDEPTH : -+ DEFAULT_MAX_QDEPTH; -+ -+ /* LOG: 68855 */ -+ /* -+ * The following is a workaround for the reordered -+ * packet and BMU2 buffer leakage issue. -+ */ -+ if (CHIP_REVISION() == 0) -+ qdepth = 31; -+ -+ writel(qdepth << 18, TMU_TEQ_HW_PROB_CFG2); -+ writel(qdepth >> 14, TMU_TEQ_HW_PROB_CFG3); -+ } -+ } -+ -+#ifdef CFG_LRO -+ /* Set TMU-3 queue 5 (LRO) in no-drop mode */ -+ writel((3 << 8) | TMU_QUEUE_LRO, TMU_TEQ_CTRL); -+ writel(0, TMU_TEQ_QCFG); -+#endif -+ -+ writel(0x05, TMU_TEQ_DISABLE_DROPCHK); -+ -+ writel(0x0, TMU_CTRL); -+} -+ -+/* Enables TMU-PE cores. -+ * @param[in] pe_mask TMU PE mask -+ */ -+void tmu_enable(u32 pe_mask) -+{ -+ writel(readl(TMU_TX_CTRL) | (pe_mask & 0xF), TMU_TX_CTRL); -+} -+ -+/* Disables TMU cores. -+ * @param[in] pe_mask TMU PE mask -+ */ -+void tmu_disable(u32 pe_mask) -+{ -+ writel(readl(TMU_TX_CTRL) & ~(pe_mask & 0xF), TMU_TX_CTRL); -+} -+ -+/* This will return the tmu queue status -+ * @param[in] if_id gem interface id or TMU index -+ * @return returns the bit mask of busy queues, zero means all -+ * queues are empty -+ */ -+u32 tmu_qstatus(u32 if_id) -+{ -+ return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS + -+ offsetof(struct pe_status, tmu_qstatus), 4)); -+} -+ -+u32 tmu_pkts_processed(u32 if_id) -+{ -+ return cpu_to_be32(pe_dmem_read(TMU0_ID + if_id, TMU_DM_PESTATUS + -+ offsetof(struct pe_status, rx), 4)); -+} -+ -+/**************************** UTIL ***************************/ -+ -+/* Resets UTIL block. -+ */ -+void util_reset(void) -+{ -+ writel(CORE_SW_RESET, UTIL_TX_CTRL); -+} -+ -+/* Initializes UTIL block. -+ * @param[in] cfg UTIL configuration -+ */ -+void util_init(struct util_cfg *cfg) -+{ -+ writel(cfg->pe_sys_clk_ratio, UTIL_PE_SYS_CLK_RATIO); -+} -+ -+/* Enables UTIL-PE core. -+ * -+ */ -+void util_enable(void) -+{ -+ writel(CORE_ENABLE, UTIL_TX_CTRL); -+} -+ -+/* Disables UTIL-PE core. -+ * -+ */ -+void util_disable(void) -+{ -+ writel(CORE_DISABLE, UTIL_TX_CTRL); -+} -+ -+/**************************** HIF ***************************/ -+/* Initializes HIF copy block. -+ * -+ */ -+void hif_init(void) -+{ -+ /*Initialize HIF registers*/ -+ writel((HIF_RX_POLL_CTRL_CYCLE << 16) | HIF_TX_POLL_CTRL_CYCLE, -+ HIF_POLL_CTRL); -+} -+ -+/* Enable hif tx DMA and interrupt -+ * -+ */ -+void hif_tx_enable(void) -+{ -+ writel(HIF_CTRL_DMA_EN, HIF_TX_CTRL); -+ writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_TXPKT_INT_EN), -+ HIF_INT_ENABLE); -+} -+ -+/* Disable hif tx DMA and interrupt -+ * -+ */ -+void hif_tx_disable(void) -+{ -+ u32 hif_int; -+ -+ writel(0, HIF_TX_CTRL); -+ -+ hif_int = readl(HIF_INT_ENABLE); -+ hif_int &= HIF_TXPKT_INT_EN; -+ writel(hif_int, HIF_INT_ENABLE); -+} -+ -+/* Enable hif rx DMA and interrupt -+ * -+ */ -+void hif_rx_enable(void) -+{ -+ hif_rx_dma_start(); -+ writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_RXPKT_INT_EN), -+ HIF_INT_ENABLE); -+} -+ -+/* Disable hif rx DMA and interrupt -+ * -+ */ -+void hif_rx_disable(void) -+{ -+ u32 hif_int; -+ -+ writel(0, HIF_RX_CTRL); -+ -+ hif_int = readl(HIF_INT_ENABLE); -+ hif_int &= HIF_RXPKT_INT_EN; -+ writel(hif_int, HIF_INT_ENABLE); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_hif.c -@@ -0,0 +1,1064 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/interrupt.h> -+#include <linux/dma-mapping.h> -+#include <linux/dmapool.h> -+#include <linux/sched.h> -+#include <linux/module.h> -+#include <linux/list.h> -+#include <linux/kthread.h> -+#include <linux/slab.h> -+ -+#include <linux/io.h> -+#include <asm/irq.h> -+ -+#include "pfe_mod.h" -+ -+#define HIF_INT_MASK (HIF_INT | HIF_RXPKT_INT | HIF_TXPKT_INT) -+ -+unsigned char napi_first_batch; -+ -+static void pfe_tx_do_cleanup(unsigned long data); -+ -+static int pfe_hif_alloc_descr(struct pfe_hif *hif) -+{ -+ void *addr; -+ dma_addr_t dma_addr; -+ int err = 0; -+ -+ pr_info("%s\n", __func__); -+ addr = dma_alloc_coherent(pfe->dev, -+ HIF_RX_DESC_NT * sizeof(struct hif_desc) + -+ HIF_TX_DESC_NT * sizeof(struct hif_desc), -+ &dma_addr, GFP_KERNEL); -+ -+ if (!addr) { -+ pr_err("%s: Could not allocate buffer descriptors!\n" -+ , __func__); -+ err = -ENOMEM; -+ goto err0; -+ } -+ -+ hif->descr_baseaddr_p = dma_addr; -+ hif->descr_baseaddr_v = addr; -+ hif->rx_ring_size = HIF_RX_DESC_NT; -+ hif->tx_ring_size = HIF_TX_DESC_NT; -+ -+ return 0; -+ -+err0: -+ return err; -+} -+ -+#if defined(LS1012A_PFE_RESET_WA) -+static void pfe_hif_disable_rx_desc(struct pfe_hif *hif) -+{ -+ int ii; -+ struct hif_desc *desc = hif->rx_base; -+ -+ /*Mark all descriptors as LAST_BD */ -+ for (ii = 0; ii < hif->rx_ring_size; ii++) { -+ desc->ctrl |= BD_CTRL_LAST_BD; -+ desc++; -+ } -+} -+ -+struct class_rx_hdr_t { -+ u32 next_ptr; /* ptr to the start of the first DDR buffer */ -+ u16 length; /* total packet length */ -+ u16 phyno; /* input physical port number */ -+ u32 status; /* gemac status bits */ -+ u32 status2; /* reserved for software usage */ -+}; -+ -+/* STATUS_BAD_FRAME_ERR is set for all errors (including checksums if enabled) -+ * except overflow -+ */ -+#define STATUS_BAD_FRAME_ERR BIT(16) -+#define STATUS_LENGTH_ERR BIT(17) -+#define STATUS_CRC_ERR BIT(18) -+#define STATUS_TOO_SHORT_ERR BIT(19) -+#define STATUS_TOO_LONG_ERR BIT(20) -+#define STATUS_CODE_ERR BIT(21) -+#define STATUS_MC_HASH_MATCH BIT(22) -+#define STATUS_CUMULATIVE_ARC_HIT BIT(23) -+#define STATUS_UNICAST_HASH_MATCH BIT(24) -+#define STATUS_IP_CHECKSUM_CORRECT BIT(25) -+#define STATUS_TCP_CHECKSUM_CORRECT BIT(26) -+#define STATUS_UDP_CHECKSUM_CORRECT BIT(27) -+#define STATUS_OVERFLOW_ERR BIT(28) /* GPI error */ -+#define MIN_PKT_SIZE 64 -+ -+static inline void copy_to_lmem(u32 *dst, u32 *src, int len) -+{ -+ int i; -+ -+ for (i = 0; i < len; i += sizeof(u32)) { -+ *dst = htonl(*src); -+ dst++; src++; -+ } -+} -+ -+static void send_dummy_pkt_to_hif(void) -+{ -+ void *lmem_ptr, *ddr_ptr, *lmem_virt_addr; -+ u32 physaddr; -+ struct class_rx_hdr_t local_hdr; -+ static u32 dummy_pkt[] = { -+ 0x33221100, 0x2b785544, 0xd73093cb, 0x01000608, -+ 0x04060008, 0x2b780200, 0xd73093cb, 0x0a01a8c0, -+ 0x33221100, 0xa8c05544, 0x00000301, 0x00000000, -+ 0x00000000, 0x00000000, 0x00000000, 0xbe86c51f }; -+ -+ ddr_ptr = (void *)((u64)readl(BMU2_BASE_ADDR + BMU_ALLOC_CTRL)); -+ if (!ddr_ptr) -+ return; -+ -+ lmem_ptr = (void *)((u64)readl(BMU1_BASE_ADDR + BMU_ALLOC_CTRL)); -+ if (!lmem_ptr) -+ return; -+ -+ pr_info("Sending a dummy pkt to HIF %p %p\n", ddr_ptr, lmem_ptr); -+ physaddr = (u32)DDR_VIRT_TO_PFE(ddr_ptr); -+ -+ lmem_virt_addr = (void *)CBUS_PFE_TO_VIRT((unsigned long int)lmem_ptr); -+ -+ local_hdr.phyno = htons(0); /* RX_PHY_0 */ -+ local_hdr.length = htons(MIN_PKT_SIZE); -+ -+ local_hdr.next_ptr = htonl((u32)physaddr); -+ /*Mark checksum is correct */ -+ local_hdr.status = htonl((STATUS_IP_CHECKSUM_CORRECT | -+ STATUS_UDP_CHECKSUM_CORRECT | -+ STATUS_TCP_CHECKSUM_CORRECT | -+ STATUS_UNICAST_HASH_MATCH | -+ STATUS_CUMULATIVE_ARC_HIT)); -+ local_hdr.status2 = 0; -+ -+ copy_to_lmem((u32 *)lmem_virt_addr, (u32 *)&local_hdr, -+ sizeof(local_hdr)); -+ -+ copy_to_lmem((u32 *)(lmem_virt_addr + LMEM_HDR_SIZE), (u32 *)dummy_pkt, -+ 0x40); -+ -+ writel((unsigned long int)lmem_ptr, CLASS_INQ_PKTPTR); -+} -+ -+void pfe_hif_rx_idle(struct pfe_hif *hif) -+{ -+ int hif_stop_loop = 10; -+ u32 rx_status; -+ -+ pfe_hif_disable_rx_desc(hif); -+ pr_info("Bringing hif to idle state..."); -+ writel(0, HIF_INT_ENABLE); -+ /*If HIF Rx BDP is busy send a dummy packet */ -+ do { -+ rx_status = readl(HIF_RX_STATUS); -+ if (rx_status & BDP_CSR_RX_DMA_ACTV) -+ send_dummy_pkt_to_hif(); -+ -+ usleep_range(100, 150); -+ } while (--hif_stop_loop); -+ -+ if (readl(HIF_RX_STATUS) & BDP_CSR_RX_DMA_ACTV) -+ pr_info("Failed\n"); -+ else -+ pr_info("Done\n"); -+} -+#endif -+ -+static void pfe_hif_free_descr(struct pfe_hif *hif) -+{ -+ pr_info("%s\n", __func__); -+ -+ dma_free_coherent(pfe->dev, -+ hif->rx_ring_size * sizeof(struct hif_desc) + -+ hif->tx_ring_size * sizeof(struct hif_desc), -+ hif->descr_baseaddr_v, hif->descr_baseaddr_p); -+} -+ -+void pfe_hif_desc_dump(struct pfe_hif *hif) -+{ -+ struct hif_desc *desc; -+ unsigned long desc_p; -+ int ii = 0; -+ -+ pr_info("%s\n", __func__); -+ -+ desc = hif->rx_base; -+ desc_p = (u32)((u64)desc - (u64)hif->descr_baseaddr_v + -+ hif->descr_baseaddr_p); -+ -+ pr_info("HIF Rx desc base %p physical %x\n", desc, (u32)desc_p); -+ for (ii = 0; ii < hif->rx_ring_size; ii++) { -+ pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n", -+ readl(&desc->status), readl(&desc->ctrl), -+ readl(&desc->data), readl(&desc->next)); -+ desc++; -+ } -+ -+ desc = hif->tx_base; -+ desc_p = ((u64)desc - (u64)hif->descr_baseaddr_v + -+ hif->descr_baseaddr_p); -+ -+ pr_info("HIF Tx desc base %p physical %x\n", desc, (u32)desc_p); -+ for (ii = 0; ii < hif->tx_ring_size; ii++) { -+ pr_info("status: %08x, ctrl: %08x, data: %08x, next: %x\n", -+ readl(&desc->status), readl(&desc->ctrl), -+ readl(&desc->data), readl(&desc->next)); -+ desc++; -+ } -+} -+ -+/* pfe_hif_release_buffers */ -+static void pfe_hif_release_buffers(struct pfe_hif *hif) -+{ -+ struct hif_desc *desc; -+ int i = 0; -+ -+ hif->rx_base = hif->descr_baseaddr_v; -+ -+ pr_info("%s\n", __func__); -+ -+ /*Free Rx buffers */ -+ desc = hif->rx_base; -+ for (i = 0; i < hif->rx_ring_size; i++) { -+ if (readl(&desc->data)) { -+ if ((i < hif->shm->rx_buf_pool_cnt) && -+ (!hif->shm->rx_buf_pool[i])) { -+ /* -+ * dma_unmap_single(hif->dev, desc->data, -+ * hif->rx_buf_len[i], DMA_FROM_DEVICE); -+ */ -+ dma_unmap_single(hif->dev, -+ DDR_PFE_TO_PHYS( -+ readl(&desc->data)), -+ hif->rx_buf_len[i], -+ DMA_FROM_DEVICE); -+ hif->shm->rx_buf_pool[i] = hif->rx_buf_addr[i]; -+ } else { -+ pr_err("%s: buffer pool already full\n" -+ , __func__); -+ } -+ } -+ -+ writel(0, &desc->data); -+ writel(0, &desc->status); -+ writel(0, &desc->ctrl); -+ desc++; -+ } -+} -+ -+/* -+ * pfe_hif_init_buffers -+ * This function initializes the HIF Rx/Tx ring descriptors and -+ * initialize Rx queue with buffers. -+ */ -+static int pfe_hif_init_buffers(struct pfe_hif *hif) -+{ -+ struct hif_desc *desc, *first_desc_p; -+ u32 data; -+ int i = 0; -+ -+ pr_info("%s\n", __func__); -+ -+ /* Check enough Rx buffers available in the shared memory */ -+ if (hif->shm->rx_buf_pool_cnt < hif->rx_ring_size) -+ return -ENOMEM; -+ -+ hif->rx_base = hif->descr_baseaddr_v; -+ memset(hif->rx_base, 0, hif->rx_ring_size * sizeof(struct hif_desc)); -+ -+ /*Initialize Rx descriptors */ -+ desc = hif->rx_base; -+ first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p; -+ -+ for (i = 0; i < hif->rx_ring_size; i++) { -+ /* Initialize Rx buffers from the shared memory */ -+ -+ data = (u32)dma_map_single(hif->dev, hif->shm->rx_buf_pool[i], -+ pfe_pkt_size, DMA_FROM_DEVICE); -+ hif->rx_buf_addr[i] = hif->shm->rx_buf_pool[i]; -+ hif->rx_buf_len[i] = pfe_pkt_size; -+ hif->shm->rx_buf_pool[i] = NULL; -+ -+ if (likely(dma_mapping_error(hif->dev, data) == 0)) { -+ writel(DDR_PHYS_TO_PFE(data), &desc->data); -+ } else { -+ pr_err("%s : low on mem\n", __func__); -+ -+ goto err; -+ } -+ -+ writel(0, &desc->status); -+ -+ /* -+ * Ensure everything else is written to DDR before -+ * writing bd->ctrl -+ */ -+ wmb(); -+ -+ writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM -+ | BD_CTRL_DIR | BD_CTRL_DESC_EN -+ | BD_BUF_LEN(pfe_pkt_size)), &desc->ctrl); -+ -+ /* Chain descriptors */ -+ writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next); -+ desc++; -+ } -+ -+ /* Overwrite last descriptor to chain it to first one*/ -+ desc--; -+ writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next); -+ -+ hif->rxtoclean_index = 0; -+ -+ /*Initialize Rx buffer descriptor ring base address */ -+ writel(DDR_PHYS_TO_PFE(hif->descr_baseaddr_p), HIF_RX_BDP_ADDR); -+ -+ hif->tx_base = hif->rx_base + hif->rx_ring_size; -+ first_desc_p = (struct hif_desc *)hif->descr_baseaddr_p + -+ hif->rx_ring_size; -+ memset(hif->tx_base, 0, hif->tx_ring_size * sizeof(struct hif_desc)); -+ -+ /*Initialize tx descriptors */ -+ desc = hif->tx_base; -+ -+ for (i = 0; i < hif->tx_ring_size; i++) { -+ /* Chain descriptors */ -+ writel((u32)DDR_PHYS_TO_PFE(first_desc_p + i + 1), &desc->next); -+ writel(0, &desc->ctrl); -+ desc++; -+ } -+ -+ /* Overwrite last descriptor to chain it to first one */ -+ desc--; -+ writel((u32)DDR_PHYS_TO_PFE(first_desc_p), &desc->next); -+ hif->txavail = hif->tx_ring_size; -+ hif->txtosend = 0; -+ hif->txtoclean = 0; -+ hif->txtoflush = 0; -+ -+ /*Initialize Tx buffer descriptor ring base address */ -+ writel((u32)DDR_PHYS_TO_PFE(first_desc_p), HIF_TX_BDP_ADDR); -+ -+ return 0; -+ -+err: -+ pfe_hif_release_buffers(hif); -+ return -ENOMEM; -+} -+ -+/* -+ * pfe_hif_client_register -+ * -+ * This function used to register a client driver with the HIF driver. -+ * -+ * Return value: -+ * 0 - on Successful registration -+ */ -+static int pfe_hif_client_register(struct pfe_hif *hif, u32 client_id, -+ struct hif_client_shm *client_shm) -+{ -+ struct hif_client *client = &hif->client[client_id]; -+ u32 i, cnt; -+ struct rx_queue_desc *rx_qbase; -+ struct tx_queue_desc *tx_qbase; -+ struct hif_rx_queue *rx_queue; -+ struct hif_tx_queue *tx_queue; -+ int err = 0; -+ -+ pr_info("%s\n", __func__); -+ -+ spin_lock_bh(&hif->tx_lock); -+ -+ if (test_bit(client_id, &hif->shm->g_client_status[0])) { -+ pr_err("%s: client %d already registered\n", -+ __func__, client_id); -+ err = -1; -+ goto unlock; -+ } -+ -+ memset(client, 0, sizeof(struct hif_client)); -+ -+ /* Initialize client Rx queues baseaddr, size */ -+ -+ cnt = CLIENT_CTRL_RX_Q_CNT(client_shm->ctrl); -+ /* Check if client is requesting for more queues than supported */ -+ if (cnt > HIF_CLIENT_QUEUES_MAX) -+ cnt = HIF_CLIENT_QUEUES_MAX; -+ -+ client->rx_qn = cnt; -+ rx_qbase = (struct rx_queue_desc *)client_shm->rx_qbase; -+ for (i = 0; i < cnt; i++) { -+ rx_queue = &client->rx_q[i]; -+ rx_queue->base = rx_qbase + i * client_shm->rx_qsize; -+ rx_queue->size = client_shm->rx_qsize; -+ rx_queue->write_idx = 0; -+ } -+ -+ /* Initialize client Tx queues baseaddr, size */ -+ cnt = CLIENT_CTRL_TX_Q_CNT(client_shm->ctrl); -+ -+ /* Check if client is requesting for more queues than supported */ -+ if (cnt > HIF_CLIENT_QUEUES_MAX) -+ cnt = HIF_CLIENT_QUEUES_MAX; -+ -+ client->tx_qn = cnt; -+ tx_qbase = (struct tx_queue_desc *)client_shm->tx_qbase; -+ for (i = 0; i < cnt; i++) { -+ tx_queue = &client->tx_q[i]; -+ tx_queue->base = tx_qbase + i * client_shm->tx_qsize; -+ tx_queue->size = client_shm->tx_qsize; -+ tx_queue->ack_idx = 0; -+ } -+ -+ set_bit(client_id, &hif->shm->g_client_status[0]); -+ -+unlock: -+ spin_unlock_bh(&hif->tx_lock); -+ -+ return err; -+} -+ -+/* -+ * pfe_hif_client_unregister -+ * -+ * This function used to unregister a client from the HIF driver. -+ * -+ */ -+static void pfe_hif_client_unregister(struct pfe_hif *hif, u32 client_id) -+{ -+ pr_info("%s\n", __func__); -+ -+ /* -+ * Mark client as no longer available (which prevents further packet -+ * receive for this client) -+ */ -+ spin_lock_bh(&hif->tx_lock); -+ -+ if (!test_bit(client_id, &hif->shm->g_client_status[0])) { -+ pr_err("%s: client %d not registered\n", __func__, -+ client_id); -+ -+ spin_unlock_bh(&hif->tx_lock); -+ return; -+ } -+ -+ clear_bit(client_id, &hif->shm->g_client_status[0]); -+ -+ spin_unlock_bh(&hif->tx_lock); -+} -+ -+/* -+ * client_put_rxpacket- -+ * This functions puts the Rx pkt in the given client Rx queue. -+ * It actually swap the Rx pkt in the client Rx descriptor buffer -+ * and returns the free buffer from it. -+ * -+ * If the function returns NULL means client Rx queue is full and -+ * packet couldn't send to client queue. -+ */ -+static void *client_put_rxpacket(struct hif_rx_queue *queue, void *pkt, u32 len, -+ u32 flags, u32 client_ctrl, u32 *rem_len) -+{ -+ void *free_pkt = NULL; -+ struct rx_queue_desc *desc = queue->base + queue->write_idx; -+ -+ if (readl(&desc->ctrl) & CL_DESC_OWN) { -+ if (page_mode) { -+ int rem_page_size = PAGE_SIZE - -+ PRESENT_OFST_IN_PAGE(pkt); -+ int cur_pkt_size = ROUND_MIN_RX_SIZE(len + -+ pfe_pkt_headroom); -+ *rem_len = (rem_page_size - cur_pkt_size); -+ if (*rem_len) { -+ free_pkt = pkt + cur_pkt_size; -+ get_page(virt_to_page(free_pkt)); -+ } else { -+ free_pkt = (void -+ *)__get_free_page(GFP_ATOMIC | GFP_DMA_PFE); -+ *rem_len = pfe_pkt_size; -+ } -+ } else { -+ free_pkt = kmalloc(PFE_BUF_SIZE, GFP_ATOMIC | -+ GFP_DMA_PFE); -+ *rem_len = PFE_BUF_SIZE - pfe_pkt_headroom; -+ } -+ -+ if (free_pkt) { -+ desc->data = pkt; -+ desc->client_ctrl = client_ctrl; -+ /* -+ * Ensure everything else is written to DDR before -+ * writing bd->ctrl -+ */ -+ smp_wmb(); -+ writel(CL_DESC_BUF_LEN(len) | flags, &desc->ctrl); -+ queue->write_idx = (queue->write_idx + 1) -+ & (queue->size - 1); -+ -+ free_pkt += pfe_pkt_headroom; -+ } -+ } -+ -+ return free_pkt; -+} -+ -+/* -+ * pfe_hif_rx_process- -+ * This function does pfe hif rx queue processing. -+ * Dequeue packet from Rx queue and send it to corresponding client queue -+ */ -+static int pfe_hif_rx_process(struct pfe_hif *hif, int budget) -+{ -+ struct hif_desc *desc; -+ struct hif_hdr *pkt_hdr; -+ struct __hif_hdr hif_hdr; -+ void *free_buf; -+ int rtc, len, rx_processed = 0; -+ struct __hif_desc local_desc; -+ int flags; -+ unsigned int desc_p; -+ unsigned int buf_size = 0; -+ -+ spin_lock_bh(&hif->lock); -+ -+ rtc = hif->rxtoclean_index; -+ -+ while (rx_processed < budget) { -+ desc = hif->rx_base + rtc; -+ -+ __memcpy12(&local_desc, desc); -+ -+ /* ACK pending Rx interrupt */ -+ if (local_desc.ctrl & BD_CTRL_DESC_EN) { -+ writel(HIF_INT | HIF_RXPKT_INT, HIF_INT_SRC); -+ -+ if (rx_processed == 0) { -+ if (napi_first_batch == 1) { -+ desc_p = hif->descr_baseaddr_p + -+ ((unsigned long int)(desc) - -+ (unsigned long -+ int)hif->descr_baseaddr_v); -+ napi_first_batch = 0; -+ } -+ } -+ -+ __memcpy12(&local_desc, desc); -+ -+ if (local_desc.ctrl & BD_CTRL_DESC_EN) -+ break; -+ } -+ -+ napi_first_batch = 0; -+ -+#ifdef HIF_NAPI_STATS -+ hif->napi_counters[NAPI_DESC_COUNT]++; -+#endif -+ len = BD_BUF_LEN(local_desc.ctrl); -+ /* -+ * dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data), -+ * hif->rx_buf_len[rtc], DMA_FROM_DEVICE); -+ */ -+ dma_unmap_single(hif->dev, DDR_PFE_TO_PHYS(local_desc.data), -+ hif->rx_buf_len[rtc], DMA_FROM_DEVICE); -+ -+ pkt_hdr = (struct hif_hdr *)hif->rx_buf_addr[rtc]; -+ -+ /* Track last HIF header received */ -+ if (!hif->started) { -+ hif->started = 1; -+ -+ __memcpy8(&hif_hdr, pkt_hdr); -+ -+ hif->qno = hif_hdr.hdr.q_num; -+ hif->client_id = hif_hdr.hdr.client_id; -+ hif->client_ctrl = (hif_hdr.hdr.client_ctrl1 << 16) | -+ hif_hdr.hdr.client_ctrl; -+ flags = CL_DESC_FIRST; -+ -+ } else { -+ flags = 0; -+ } -+ -+ if (local_desc.ctrl & BD_CTRL_LIFM) -+ flags |= CL_DESC_LAST; -+ -+ /* Check for valid client id and still registered */ -+ if ((hif->client_id >= HIF_CLIENTS_MAX) || -+ !(test_bit(hif->client_id, -+ &hif->shm->g_client_status[0]))) { -+ printk_ratelimited("%s: packet with invalid client id %d q_num %d\n", -+ __func__, -+ hif->client_id, -+ hif->qno); -+ -+ free_buf = pkt_hdr; -+ -+ goto pkt_drop; -+ } -+ -+ /* Check to valid queue number */ -+ if (hif->client[hif->client_id].rx_qn <= hif->qno) { -+ pr_info("%s: packet with invalid queue: %d\n" -+ , __func__, hif->qno); -+ hif->qno = 0; -+ } -+ -+ free_buf = -+ client_put_rxpacket(&hif->client[hif->client_id].rx_q[hif->qno], -+ (void *)pkt_hdr, len, flags, -+ hif->client_ctrl, &buf_size); -+ -+ hif_lib_indicate_client(hif->client_id, EVENT_RX_PKT_IND, -+ hif->qno); -+ -+ if (unlikely(!free_buf)) { -+#ifdef HIF_NAPI_STATS -+ hif->napi_counters[NAPI_CLIENT_FULL_COUNT]++; -+#endif -+ /* -+ * If we want to keep in polling mode to retry later, -+ * we need to tell napi that we consumed -+ * the full budget or we will hit a livelock scenario. -+ * The core code keeps this napi instance -+ * at the head of the list and none of the other -+ * instances get to run -+ */ -+ rx_processed = budget; -+ -+ if (flags & CL_DESC_FIRST) -+ hif->started = 0; -+ -+ break; -+ } -+ -+pkt_drop: -+ /*Fill free buffer in the descriptor */ -+ hif->rx_buf_addr[rtc] = free_buf; -+ hif->rx_buf_len[rtc] = min(pfe_pkt_size, buf_size); -+ writel((DDR_PHYS_TO_PFE -+ ((u32)dma_map_single(hif->dev, -+ free_buf, hif->rx_buf_len[rtc], DMA_FROM_DEVICE))), -+ &desc->data); -+ /* -+ * Ensure everything else is written to DDR before -+ * writing bd->ctrl -+ */ -+ wmb(); -+ writel((BD_CTRL_PKT_INT_EN | BD_CTRL_LIFM | BD_CTRL_DIR | -+ BD_CTRL_DESC_EN | BD_BUF_LEN(hif->rx_buf_len[rtc])), -+ &desc->ctrl); -+ -+ rtc = (rtc + 1) & (hif->rx_ring_size - 1); -+ -+ if (local_desc.ctrl & BD_CTRL_LIFM) { -+ if (!(hif->client_ctrl & HIF_CTRL_RX_CONTINUED)) { -+ rx_processed++; -+ -+#ifdef HIF_NAPI_STATS -+ hif->napi_counters[NAPI_PACKET_COUNT]++; -+#endif -+ } -+ hif->started = 0; -+ } -+ } -+ -+ hif->rxtoclean_index = rtc; -+ spin_unlock_bh(&hif->lock); -+ -+ /* we made some progress, re-start rx dma in case it stopped */ -+ hif_rx_dma_start(); -+ -+ return rx_processed; -+} -+ -+/* -+ * client_ack_txpacket- -+ * This function ack the Tx packet in the give client Tx queue by resetting -+ * ownership bit in the descriptor. -+ */ -+static int client_ack_txpacket(struct pfe_hif *hif, unsigned int client_id, -+ unsigned int q_no) -+{ -+ struct hif_tx_queue *queue = &hif->client[client_id].tx_q[q_no]; -+ struct tx_queue_desc *desc = queue->base + queue->ack_idx; -+ -+ if (readl(&desc->ctrl) & CL_DESC_OWN) { -+ writel((readl(&desc->ctrl) & ~CL_DESC_OWN), &desc->ctrl); -+ queue->ack_idx = (queue->ack_idx + 1) & (queue->size - 1); -+ -+ return 0; -+ -+ } else { -+ /*This should not happen */ -+ pr_err("%s: %d %d %d %d %d %p %d\n", __func__, -+ hif->txtosend, hif->txtoclean, hif->txavail, -+ client_id, q_no, queue, queue->ack_idx); -+ WARN(1, "%s: doesn't own this descriptor", __func__); -+ return 1; -+ } -+} -+ -+void __hif_tx_done_process(struct pfe_hif *hif, int count) -+{ -+ struct hif_desc *desc; -+ struct hif_desc_sw *desc_sw; -+ int ttc, tx_avl; -+ int pkts_done[HIF_CLIENTS_MAX] = {0, 0}; -+ -+ ttc = hif->txtoclean; -+ tx_avl = hif->txavail; -+ -+ while ((tx_avl < hif->tx_ring_size) && count--) { -+ desc = hif->tx_base + ttc; -+ -+ if (readl(&desc->ctrl) & BD_CTRL_DESC_EN) -+ break; -+ -+ desc_sw = &hif->tx_sw_queue[ttc]; -+ -+ if (desc_sw->data) { -+ /* -+ * dmap_unmap_single(hif->dev, desc_sw->data, -+ * desc_sw->len, DMA_TO_DEVICE); -+ */ -+ dma_unmap_single(hif->dev, desc_sw->data, -+ desc_sw->len, DMA_TO_DEVICE); -+ } -+ -+ if (desc_sw->client_id >= HIF_CLIENTS_MAX) { -+ pr_err("Invalid cl id %d\n", desc_sw->client_id); -+ break; -+ } -+ -+ pkts_done[desc_sw->client_id]++; -+ -+ client_ack_txpacket(hif, desc_sw->client_id, desc_sw->q_no); -+ -+ ttc = (ttc + 1) & (hif->tx_ring_size - 1); -+ tx_avl++; -+ } -+ -+ if (pkts_done[0]) -+ hif_lib_indicate_client(0, EVENT_TXDONE_IND, 0); -+ if (pkts_done[1]) -+ hif_lib_indicate_client(1, EVENT_TXDONE_IND, 0); -+ -+ hif->txtoclean = ttc; -+ hif->txavail = tx_avl; -+ -+ if (!count) { -+ tasklet_schedule(&hif->tx_cleanup_tasklet); -+ } else { -+ /*Enable Tx done interrupt */ -+ writel(readl_relaxed(HIF_INT_ENABLE) | HIF_TXPKT_INT, -+ HIF_INT_ENABLE); -+ } -+} -+ -+static void pfe_tx_do_cleanup(unsigned long data) -+{ -+ struct pfe_hif *hif = (struct pfe_hif *)data; -+ -+ writel(HIF_INT | HIF_TXPKT_INT, HIF_INT_SRC); -+ -+ hif_tx_done_process(hif, 64); -+} -+ -+/* -+ * __hif_xmit_pkt - -+ * This function puts one packet in the HIF Tx queue -+ */ -+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int -+ q_no, void *data, u32 len, unsigned int flags) -+{ -+ struct hif_desc *desc; -+ struct hif_desc_sw *desc_sw; -+ -+ desc = hif->tx_base + hif->txtosend; -+ desc_sw = &hif->tx_sw_queue[hif->txtosend]; -+ -+ desc_sw->len = len; -+ desc_sw->client_id = client_id; -+ desc_sw->q_no = q_no; -+ desc_sw->flags = flags; -+ -+ if (flags & HIF_DONT_DMA_MAP) { -+ desc_sw->data = 0; -+ writel((u32)DDR_PHYS_TO_PFE(data), &desc->data); -+ } else { -+ desc_sw->data = dma_map_single(hif->dev, data, len, -+ DMA_TO_DEVICE); -+ writel((u32)DDR_PHYS_TO_PFE(desc_sw->data), &desc->data); -+ } -+ -+ hif->txtosend = (hif->txtosend + 1) & (hif->tx_ring_size - 1); -+ hif->txavail--; -+ -+ if ((!((flags & HIF_DATA_VALID) && (flags & -+ HIF_LAST_BUFFER)))) -+ goto skip_tx; -+ -+ /* -+ * Ensure everything else is written to DDR before -+ * writing bd->ctrl -+ */ -+ wmb(); -+ -+ do { -+ desc_sw = &hif->tx_sw_queue[hif->txtoflush]; -+ desc = hif->tx_base + hif->txtoflush; -+ -+ if (desc_sw->flags & HIF_LAST_BUFFER) { -+ writel((BD_CTRL_LIFM | -+ BD_CTRL_BRFETCH_DISABLE | BD_CTRL_RTFETCH_DISABLE -+ | BD_CTRL_PARSE_DISABLE | BD_CTRL_DESC_EN | -+ BD_CTRL_PKT_INT_EN | BD_BUF_LEN(desc_sw->len)), -+ &desc->ctrl); -+ } else { -+ writel((BD_CTRL_DESC_EN | -+ BD_BUF_LEN(desc_sw->len)), &desc->ctrl); -+ } -+ hif->txtoflush = (hif->txtoflush + 1) & (hif->tx_ring_size - 1); -+ } -+ while (hif->txtoflush != hif->txtosend) -+ ; -+ -+skip_tx: -+ return; -+} -+ -+static irqreturn_t wol_isr(int irq, void *dev_id) -+{ -+ pr_info("WoL\n"); -+ gemac_set_wol(EMAC1_BASE_ADDR, 0); -+ gemac_set_wol(EMAC2_BASE_ADDR, 0); -+ return IRQ_HANDLED; -+} -+ -+/* -+ * hif_isr- -+ * This ISR routine processes Rx/Tx done interrupts from the HIF hardware block -+ */ -+static irqreturn_t hif_isr(int irq, void *dev_id) -+{ -+ struct pfe_hif *hif = (struct pfe_hif *)dev_id; -+ int int_status; -+ int int_enable_mask; -+ -+ /*Read hif interrupt source register */ -+ int_status = readl_relaxed(HIF_INT_SRC); -+ int_enable_mask = readl_relaxed(HIF_INT_ENABLE); -+ -+ if ((int_status & HIF_INT) == 0) -+ return IRQ_NONE; -+ -+ int_status &= ~(HIF_INT); -+ -+ if (int_status & HIF_RXPKT_INT) { -+ int_status &= ~(HIF_RXPKT_INT); -+ int_enable_mask &= ~(HIF_RXPKT_INT); -+ -+ napi_first_batch = 1; -+ -+ if (napi_schedule_prep(&hif->napi)) { -+#ifdef HIF_NAPI_STATS -+ hif->napi_counters[NAPI_SCHED_COUNT]++; -+#endif -+ __napi_schedule(&hif->napi); -+ } -+ } -+ -+ if (int_status & HIF_TXPKT_INT) { -+ int_status &= ~(HIF_TXPKT_INT); -+ int_enable_mask &= ~(HIF_TXPKT_INT); -+ /*Schedule tx cleanup tassklet */ -+ tasklet_schedule(&hif->tx_cleanup_tasklet); -+ } -+ -+ /*Disable interrupts, they will be enabled after they are serviced */ -+ writel_relaxed(int_enable_mask, HIF_INT_ENABLE); -+ -+ if (int_status) { -+ pr_info("%s : Invalid interrupt : %d\n", __func__, -+ int_status); -+ writel(int_status, HIF_INT_SRC); -+ } -+ -+ return IRQ_HANDLED; -+} -+ -+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int data2) -+{ -+ unsigned int client_id = data1; -+ -+ if (client_id >= HIF_CLIENTS_MAX) { -+ pr_err("%s: client id %d out of bounds\n", __func__, -+ client_id); -+ return; -+ } -+ -+ switch (req) { -+ case REQUEST_CL_REGISTER: -+ /* Request for register a client */ -+ pr_info("%s: register client_id %d\n", -+ __func__, client_id); -+ pfe_hif_client_register(hif, client_id, (struct -+ hif_client_shm *)&hif->shm->client[client_id]); -+ break; -+ -+ case REQUEST_CL_UNREGISTER: -+ pr_info("%s: unregister client_id %d\n", -+ __func__, client_id); -+ -+ /* Request for unregister a client */ -+ pfe_hif_client_unregister(hif, client_id); -+ -+ break; -+ -+ default: -+ pr_err("%s: unsupported request %d\n", -+ __func__, req); -+ break; -+ } -+ -+ /* -+ * Process client Tx queues -+ * Currently we don't have checking for tx pending -+ */ -+} -+ -+/* -+ * pfe_hif_rx_poll -+ * This function is NAPI poll function to process HIF Rx queue. -+ */ -+static int pfe_hif_rx_poll(struct napi_struct *napi, int budget) -+{ -+ struct pfe_hif *hif = container_of(napi, struct pfe_hif, napi); -+ int work_done; -+ -+#ifdef HIF_NAPI_STATS -+ hif->napi_counters[NAPI_POLL_COUNT]++; -+#endif -+ -+ work_done = pfe_hif_rx_process(hif, budget); -+ -+ if (work_done < budget) { -+ napi_complete(napi); -+ writel(readl_relaxed(HIF_INT_ENABLE) | HIF_RXPKT_INT, -+ HIF_INT_ENABLE); -+ } -+#ifdef HIF_NAPI_STATS -+ else -+ hif->napi_counters[NAPI_FULL_BUDGET_COUNT]++; -+#endif -+ -+ return work_done; -+} -+ -+/* -+ * pfe_hif_init -+ * This function initializes the baseaddresses and irq, etc. -+ */ -+int pfe_hif_init(struct pfe *pfe) -+{ -+ struct pfe_hif *hif = &pfe->hif; -+ int err; -+ -+ pr_info("%s\n", __func__); -+ -+ hif->dev = pfe->dev; -+ hif->irq = pfe->hif_irq; -+ -+ err = pfe_hif_alloc_descr(hif); -+ if (err) -+ goto err0; -+ -+ if (pfe_hif_init_buffers(hif)) { -+ pr_err("%s: Could not initialize buffer descriptors\n" -+ , __func__); -+ err = -ENOMEM; -+ goto err1; -+ } -+ -+ /* Initialize NAPI for Rx processing */ -+ init_dummy_netdev(&hif->dummy_dev); -+ netif_napi_add(&hif->dummy_dev, &hif->napi, pfe_hif_rx_poll, -+ HIF_RX_POLL_WEIGHT); -+ napi_enable(&hif->napi); -+ -+ spin_lock_init(&hif->tx_lock); -+ spin_lock_init(&hif->lock); -+ -+ hif_init(); -+ hif_rx_enable(); -+ hif_tx_enable(); -+ -+ /* Disable tx done interrupt */ -+ writel(HIF_INT_MASK, HIF_INT_ENABLE); -+ -+ gpi_enable(HGPI_BASE_ADDR); -+ -+ err = request_irq(hif->irq, hif_isr, 0, "pfe_hif", hif); -+ if (err) { -+ pr_err("%s: failed to get the hif IRQ = %d\n", -+ __func__, hif->irq); -+ goto err1; -+ } -+ -+ err = request_irq(pfe->wol_irq, wol_isr, 0, "pfe_wol", pfe); -+ if (err) { -+ pr_err("%s: failed to get the wol IRQ = %d\n", -+ __func__, pfe->wol_irq); -+ goto err1; -+ } -+ -+ tasklet_init(&hif->tx_cleanup_tasklet, -+ (void(*)(unsigned long))pfe_tx_do_cleanup, -+ (unsigned long)hif); -+ -+ return 0; -+err1: -+ pfe_hif_free_descr(hif); -+err0: -+ return err; -+} -+ -+/* pfe_hif_exit- */ -+void pfe_hif_exit(struct pfe *pfe) -+{ -+ struct pfe_hif *hif = &pfe->hif; -+ -+ pr_info("%s\n", __func__); -+ -+ tasklet_kill(&hif->tx_cleanup_tasklet); -+ -+ spin_lock_bh(&hif->lock); -+ hif->shm->g_client_status[0] = 0; -+ /* Make sure all clients are disabled*/ -+ hif->shm->g_client_status[1] = 0; -+ -+ spin_unlock_bh(&hif->lock); -+ -+ /*Disable Rx/Tx */ -+ gpi_disable(HGPI_BASE_ADDR); -+ hif_rx_disable(); -+ hif_tx_disable(); -+ -+ napi_disable(&hif->napi); -+ netif_napi_del(&hif->napi); -+ -+ free_irq(pfe->wol_irq, pfe); -+ free_irq(hif->irq, hif); -+ -+ pfe_hif_release_buffers(hif); -+ pfe_hif_free_descr(hif); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_hif.h -@@ -0,0 +1,199 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_HIF_H_ -+#define _PFE_HIF_H_ -+ -+#include <linux/netdevice.h> -+ -+#define HIF_NAPI_STATS -+ -+#define HIF_CLIENT_QUEUES_MAX 16 -+#define HIF_RX_POLL_WEIGHT 64 -+ -+#define HIF_RX_PKT_MIN_SIZE 0x800 /* 2KB */ -+#define HIF_RX_PKT_MIN_SIZE_MASK ~(HIF_RX_PKT_MIN_SIZE - 1) -+#define ROUND_MIN_RX_SIZE(_sz) (((_sz) + (HIF_RX_PKT_MIN_SIZE - 1)) \ -+ & HIF_RX_PKT_MIN_SIZE_MASK) -+#define PRESENT_OFST_IN_PAGE(_buf) (((unsigned long int)(_buf) & (PAGE_SIZE \ -+ - 1)) & HIF_RX_PKT_MIN_SIZE_MASK) -+ -+enum { -+ NAPI_SCHED_COUNT = 0, -+ NAPI_POLL_COUNT, -+ NAPI_PACKET_COUNT, -+ NAPI_DESC_COUNT, -+ NAPI_FULL_BUDGET_COUNT, -+ NAPI_CLIENT_FULL_COUNT, -+ NAPI_MAX_COUNT -+}; -+ -+/* -+ * HIF_TX_DESC_NT value should be always greter than 4, -+ * Otherwise HIF_TX_POLL_MARK will become zero. -+ */ -+#define HIF_RX_DESC_NT 256 -+#define HIF_TX_DESC_NT 2048 -+ -+#define HIF_FIRST_BUFFER BIT(0) -+#define HIF_LAST_BUFFER BIT(1) -+#define HIF_DONT_DMA_MAP BIT(2) -+#define HIF_DATA_VALID BIT(3) -+#define HIF_TSO BIT(4) -+ -+enum { -+ PFE_CL_GEM0 = 0, -+ PFE_CL_GEM1, -+ HIF_CLIENTS_MAX -+}; -+ -+/*structure to store client queue info */ -+struct hif_rx_queue { -+ struct rx_queue_desc *base; -+ u32 size; -+ u32 write_idx; -+}; -+ -+struct hif_tx_queue { -+ struct tx_queue_desc *base; -+ u32 size; -+ u32 ack_idx; -+}; -+ -+/*Structure to store the client info */ -+struct hif_client { -+ int rx_qn; -+ struct hif_rx_queue rx_q[HIF_CLIENT_QUEUES_MAX]; -+ int tx_qn; -+ struct hif_tx_queue tx_q[HIF_CLIENT_QUEUES_MAX]; -+}; -+ -+/*HIF hardware buffer descriptor */ -+struct hif_desc { -+ u32 ctrl; -+ u32 status; -+ u32 data; -+ u32 next; -+}; -+ -+struct __hif_desc { -+ u32 ctrl; -+ u32 status; -+ u32 data; -+}; -+ -+struct hif_desc_sw { -+ dma_addr_t data; -+ u16 len; -+ u8 client_id; -+ u8 q_no; -+ u16 flags; -+}; -+ -+struct hif_hdr { -+ u8 client_id; -+ u8 q_num; -+ u16 client_ctrl; -+ u16 client_ctrl1; -+}; -+ -+struct __hif_hdr { -+ union { -+ struct hif_hdr hdr; -+ u32 word[2]; -+ }; -+}; -+ -+struct hif_ipsec_hdr { -+ u16 sa_handle[2]; -+} __packed; -+ -+/* HIF_CTRL_TX... defines */ -+#define HIF_CTRL_TX_CHECKSUM BIT(2) -+ -+/* HIF_CTRL_RX... defines */ -+#define HIF_CTRL_RX_OFFSET_OFST (24) -+#define HIF_CTRL_RX_CHECKSUMMED BIT(2) -+#define HIF_CTRL_RX_CONTINUED BIT(1) -+ -+struct pfe_hif { -+ /* To store registered clients in hif layer */ -+ struct hif_client client[HIF_CLIENTS_MAX]; -+ struct hif_shm *shm; -+ int irq; -+ -+ void *descr_baseaddr_v; -+ unsigned long descr_baseaddr_p; -+ -+ struct hif_desc *rx_base; -+ u32 rx_ring_size; -+ u32 rxtoclean_index; -+ void *rx_buf_addr[HIF_RX_DESC_NT]; -+ int rx_buf_len[HIF_RX_DESC_NT]; -+ unsigned int qno; -+ unsigned int client_id; -+ unsigned int client_ctrl; -+ unsigned int started; -+ -+ struct hif_desc *tx_base; -+ u32 tx_ring_size; -+ u32 txtosend; -+ u32 txtoclean; -+ u32 txavail; -+ u32 txtoflush; -+ struct hif_desc_sw tx_sw_queue[HIF_TX_DESC_NT]; -+ -+/* tx_lock synchronizes hif packet tx as well as pfe_hif structure access */ -+ spinlock_t tx_lock; -+/* lock synchronizes hif rx queue processing */ -+ spinlock_t lock; -+ struct net_device dummy_dev; -+ struct napi_struct napi; -+ struct device *dev; -+ -+#ifdef HIF_NAPI_STATS -+ unsigned int napi_counters[NAPI_MAX_COUNT]; -+#endif -+ struct tasklet_struct tx_cleanup_tasklet; -+}; -+ -+void __hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int -+ q_no, void *data, u32 len, unsigned int flags); -+int hif_xmit_pkt(struct pfe_hif *hif, unsigned int client_id, unsigned int q_no, -+ void *data, unsigned int len); -+void __hif_tx_done_process(struct pfe_hif *hif, int count); -+void hif_process_client_req(struct pfe_hif *hif, int req, int data1, int -+ data2); -+int pfe_hif_init(struct pfe *pfe); -+void pfe_hif_exit(struct pfe *pfe); -+void pfe_hif_rx_idle(struct pfe_hif *hif); -+static inline void hif_tx_done_process(struct pfe_hif *hif, int count) -+{ -+ spin_lock_bh(&hif->tx_lock); -+ __hif_tx_done_process(hif, count); -+ spin_unlock_bh(&hif->tx_lock); -+} -+ -+static inline void hif_tx_lock(struct pfe_hif *hif) -+{ -+ spin_lock_bh(&hif->tx_lock); -+} -+ -+static inline void hif_tx_unlock(struct pfe_hif *hif) -+{ -+ spin_unlock_bh(&hif->tx_lock); -+} -+ -+static inline int __hif_tx_avail(struct pfe_hif *hif) -+{ -+ return hif->txavail; -+} -+ -+#define __memcpy8(dst, src) memcpy(dst, src, 8) -+#define __memcpy12(dst, src) memcpy(dst, src, 12) -+#define __memcpy(dst, src, len) memcpy(dst, src, len) -+ -+#endif /* _PFE_HIF_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.c -@@ -0,0 +1,628 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include <linux/version.h> -+#include <linux/kernel.h> -+#include <linux/slab.h> -+#include <linux/interrupt.h> -+#include <linux/workqueue.h> -+#include <linux/dma-mapping.h> -+#include <linux/dmapool.h> -+#include <linux/sched.h> -+#include <linux/skbuff.h> -+#include <linux/moduleparam.h> -+#include <linux/cpu.h> -+ -+#include "pfe_mod.h" -+#include "pfe_hif.h" -+#include "pfe_hif_lib.h" -+ -+unsigned int lro_mode; -+unsigned int page_mode; -+unsigned int tx_qos = 1; -+module_param(tx_qos, uint, 0444); -+MODULE_PARM_DESC(tx_qos, "0: disable ,\n" -+ "1: enable (default), guarantee no packet drop at TMU level\n"); -+unsigned int pfe_pkt_size; -+unsigned int pfe_pkt_headroom; -+unsigned int emac_txq_cnt; -+ -+/* -+ * @pfe_hal_lib.c. -+ * Common functions used by HIF client drivers -+ */ -+ -+/*HIF shared memory Global variable */ -+struct hif_shm ghif_shm; -+ -+/* Cleanup the HIF shared memory, release HIF rx_buffer_pool. -+ * This function should be called after pfe_hif_exit -+ * -+ * @param[in] hif_shm Shared memory address location in DDR -+ */ -+static void pfe_hif_shm_clean(struct hif_shm *hif_shm) -+{ -+ int i; -+ void *pkt; -+ -+ for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) { -+ pkt = hif_shm->rx_buf_pool[i]; -+ if (pkt) { -+ hif_shm->rx_buf_pool[i] = NULL; -+ pkt -= pfe_pkt_headroom; -+ -+ if (page_mode) -+ put_page(virt_to_page(pkt)); -+ else -+ kfree(pkt); -+ } -+ } -+} -+ -+/* Initialize shared memory used between HIF driver and clients, -+ * allocate rx_buffer_pool required for HIF Rx descriptors. -+ * This function should be called before initializing HIF driver. -+ * -+ * @param[in] hif_shm Shared memory address location in DDR -+ * @rerurn 0 - on succes, <0 on fail to initialize -+ */ -+static int pfe_hif_shm_init(struct hif_shm *hif_shm) -+{ -+ int i; -+ void *pkt; -+ -+ memset(hif_shm, 0, sizeof(struct hif_shm)); -+ hif_shm->rx_buf_pool_cnt = HIF_RX_DESC_NT; -+ -+ for (i = 0; i < hif_shm->rx_buf_pool_cnt; i++) { -+ if (page_mode) { -+ pkt = (void *)__get_free_page(GFP_KERNEL | -+ GFP_DMA_PFE); -+ } else { -+ pkt = kmalloc(PFE_BUF_SIZE, GFP_KERNEL | GFP_DMA_PFE); -+ } -+ -+ if (pkt) -+ hif_shm->rx_buf_pool[i] = pkt + pfe_pkt_headroom; -+ else -+ goto err0; -+ } -+ -+ return 0; -+ -+err0: -+ pr_err("%s Low memory\n", __func__); -+ pfe_hif_shm_clean(hif_shm); -+ return -ENOMEM; -+} -+ -+/*This function sends indication to HIF driver -+ * -+ * @param[in] hif hif context -+ */ -+static void hif_lib_indicate_hif(struct pfe_hif *hif, int req, int data1, int -+ data2) -+{ -+ hif_process_client_req(hif, req, data1, data2); -+} -+ -+void hif_lib_indicate_client(int client_id, int event_type, int qno) -+{ -+ struct hif_client_s *client = pfe->hif_client[client_id]; -+ -+ if (!client || (event_type >= HIF_EVENT_MAX) || (qno >= -+ HIF_CLIENT_QUEUES_MAX)) -+ return; -+ -+ if (!test_and_set_bit(qno, &client->queue_mask[event_type])) -+ client->event_handler(client->priv, event_type, qno); -+} -+ -+/*This function releases Rx queue descriptors memory and pre-filled buffers -+ * -+ * @param[in] client hif_client context -+ */ -+static void hif_lib_client_release_rx_buffers(struct hif_client_s *client) -+{ -+ struct rx_queue_desc *desc; -+ int qno, ii; -+ void *buf; -+ -+ for (qno = 0; qno < client->rx_qn; qno++) { -+ desc = client->rx_q[qno].base; -+ -+ for (ii = 0; ii < client->rx_q[qno].size; ii++) { -+ buf = (void *)desc->data; -+ if (buf) { -+ buf -= pfe_pkt_headroom; -+ -+ if (page_mode) -+ free_page((unsigned long)buf); -+ else -+ kfree(buf); -+ -+ desc->ctrl = 0; -+ } -+ -+ desc++; -+ } -+ } -+ -+ kfree(client->rx_qbase); -+} -+ -+/*This function allocates memory for the rxq descriptors and pre-fill rx queues -+ * with buffers. -+ * @param[in] client client context -+ * @param[in] q_size size of the rxQ, all queues are of same size -+ */ -+static int hif_lib_client_init_rx_buffers(struct hif_client_s *client, int -+ q_size) -+{ -+ struct rx_queue_desc *desc; -+ struct hif_client_rx_queue *queue; -+ int ii, qno; -+ -+ /*Allocate memory for the client queues */ -+ client->rx_qbase = kzalloc(client->rx_qn * q_size * sizeof(struct -+ rx_queue_desc), GFP_KERNEL); -+ if (!client->rx_qbase) -+ goto err; -+ -+ for (qno = 0; qno < client->rx_qn; qno++) { -+ queue = &client->rx_q[qno]; -+ -+ queue->base = client->rx_qbase + qno * q_size * sizeof(struct -+ rx_queue_desc); -+ queue->size = q_size; -+ queue->read_idx = 0; -+ queue->write_idx = 0; -+ -+ pr_debug("rx queue: %d, base: %p, size: %d\n", qno, -+ queue->base, queue->size); -+ } -+ -+ for (qno = 0; qno < client->rx_qn; qno++) { -+ queue = &client->rx_q[qno]; -+ desc = queue->base; -+ -+ for (ii = 0; ii < queue->size; ii++) { -+ desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | -+ CL_DESC_OWN; -+ desc++; -+ } -+ } -+ -+ return 0; -+ -+err: -+ return 1; -+} -+ -+ -+static void hif_lib_client_cleanup_tx_queue(struct hif_client_tx_queue *queue) -+{ -+ pr_debug("%s\n", __func__); -+ -+ /* -+ * Check if there are any pending packets. Client must flush the tx -+ * queues before unregistering, by calling by calling -+ * hif_lib_tx_get_next_complete() -+ * -+ * Hif no longer calls since we are no longer registered -+ */ -+ if (queue->tx_pending) -+ pr_err("%s: pending transmit packets\n", __func__); -+} -+ -+static void hif_lib_client_release_tx_buffers(struct hif_client_s *client) -+{ -+ int qno; -+ -+ pr_debug("%s\n", __func__); -+ -+ for (qno = 0; qno < client->tx_qn; qno++) -+ hif_lib_client_cleanup_tx_queue(&client->tx_q[qno]); -+ -+ kfree(client->tx_qbase); -+} -+ -+static int hif_lib_client_init_tx_buffers(struct hif_client_s *client, int -+ q_size) -+{ -+ struct hif_client_tx_queue *queue; -+ int qno; -+ -+ client->tx_qbase = kzalloc(client->tx_qn * q_size * sizeof(struct -+ tx_queue_desc), GFP_KERNEL); -+ if (!client->tx_qbase) -+ return 1; -+ -+ for (qno = 0; qno < client->tx_qn; qno++) { -+ queue = &client->tx_q[qno]; -+ -+ queue->base = client->tx_qbase + qno * q_size * sizeof(struct -+ tx_queue_desc); -+ queue->size = q_size; -+ queue->read_idx = 0; -+ queue->write_idx = 0; -+ queue->tx_pending = 0; -+ queue->nocpy_flag = 0; -+ queue->prev_tmu_tx_pkts = 0; -+ queue->done_tmu_tx_pkts = 0; -+ -+ pr_debug("tx queue: %d, base: %p, size: %d\n", qno, -+ queue->base, queue->size); -+ } -+ -+ return 0; -+} -+ -+static int hif_lib_event_dummy(void *priv, int event_type, int qno) -+{ -+ return 0; -+} -+ -+int hif_lib_client_register(struct hif_client_s *client) -+{ -+ struct hif_shm *hif_shm; -+ struct hif_client_shm *client_shm; -+ int err, i; -+ /* int loop_cnt = 0; */ -+ -+ pr_debug("%s\n", __func__); -+ -+ /*Allocate memory before spin_lock*/ -+ if (hif_lib_client_init_rx_buffers(client, client->rx_qsize)) { -+ err = -ENOMEM; -+ goto err_rx; -+ } -+ -+ if (hif_lib_client_init_tx_buffers(client, client->tx_qsize)) { -+ err = -ENOMEM; -+ goto err_tx; -+ } -+ -+ spin_lock_bh(&pfe->hif.lock); -+ if (!(client->pfe) || (client->id >= HIF_CLIENTS_MAX) || -+ (pfe->hif_client[client->id])) { -+ err = -EINVAL; -+ goto err; -+ } -+ -+ hif_shm = client->pfe->hif.shm; -+ -+ if (!client->event_handler) -+ client->event_handler = hif_lib_event_dummy; -+ -+ /*Initialize client specific shared memory */ -+ client_shm = (struct hif_client_shm *)&hif_shm->client[client->id]; -+ client_shm->rx_qbase = (unsigned long int)client->rx_qbase; -+ client_shm->rx_qsize = client->rx_qsize; -+ client_shm->tx_qbase = (unsigned long int)client->tx_qbase; -+ client_shm->tx_qsize = client->tx_qsize; -+ client_shm->ctrl = (client->tx_qn << CLIENT_CTRL_TX_Q_CNT_OFST) | -+ (client->rx_qn << CLIENT_CTRL_RX_Q_CNT_OFST); -+ /* spin_lock_init(&client->rx_lock); */ -+ -+ for (i = 0; i < HIF_EVENT_MAX; i++) { -+ client->queue_mask[i] = 0; /* -+ * By default all events are -+ * unmasked -+ */ -+ } -+ -+ /*Indicate to HIF driver*/ -+ hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_REGISTER, client->id, 0); -+ -+ pr_debug("%s: client: %p, client_id: %d, tx_qsize: %d, rx_qsize: %d\n", -+ __func__, client, client->id, client->tx_qsize, -+ client->rx_qsize); -+ -+ client->cpu_id = -1; -+ -+ pfe->hif_client[client->id] = client; -+ spin_unlock_bh(&pfe->hif.lock); -+ -+ return 0; -+ -+err: -+ spin_unlock_bh(&pfe->hif.lock); -+ hif_lib_client_release_tx_buffers(client); -+ -+err_tx: -+ hif_lib_client_release_rx_buffers(client); -+ -+err_rx: -+ return err; -+} -+ -+int hif_lib_client_unregister(struct hif_client_s *client) -+{ -+ struct pfe *pfe = client->pfe; -+ u32 client_id = client->id; -+ -+ pr_info( -+ "%s : client: %p, client_id: %d, txQ_depth: %d, rxQ_depth: %d\n" -+ , __func__, client, client->id, client->tx_qsize, -+ client->rx_qsize); -+ -+ spin_lock_bh(&pfe->hif.lock); -+ hif_lib_indicate_hif(&pfe->hif, REQUEST_CL_UNREGISTER, client->id, 0); -+ -+ hif_lib_client_release_tx_buffers(client); -+ hif_lib_client_release_rx_buffers(client); -+ pfe->hif_client[client_id] = NULL; -+ spin_unlock_bh(&pfe->hif.lock); -+ -+ return 0; -+} -+ -+int hif_lib_event_handler_start(struct hif_client_s *client, int event, -+ int qno) -+{ -+ struct hif_client_rx_queue *queue = &client->rx_q[qno]; -+ struct rx_queue_desc *desc = queue->base + queue->read_idx; -+ -+ if ((event >= HIF_EVENT_MAX) || (qno >= HIF_CLIENT_QUEUES_MAX)) { -+ pr_debug("%s: Unsupported event : %d queue number : %d\n", -+ __func__, event, qno); -+ return -1; -+ } -+ -+ test_and_clear_bit(qno, &client->queue_mask[event]); -+ -+ switch (event) { -+ case EVENT_RX_PKT_IND: -+ if (!(desc->ctrl & CL_DESC_OWN)) -+ hif_lib_indicate_client(client->id, -+ EVENT_RX_PKT_IND, qno); -+ break; -+ -+ case EVENT_HIGH_RX_WM: -+ case EVENT_TXDONE_IND: -+ default: -+ break; -+ } -+ -+ return 0; -+} -+ -+/* -+ * This function gets one packet from the specified client queue -+ * It also refill the rx buffer -+ */ -+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int -+ *ofst, unsigned int *rx_ctrl, -+ unsigned int *desc_ctrl, void **priv_data) -+{ -+ struct hif_client_rx_queue *queue = &client->rx_q[qno]; -+ struct rx_queue_desc *desc; -+ void *pkt = NULL; -+ -+ /* -+ * Following lock is to protect rx queue access from, -+ * hif_lib_event_handler_start. -+ * In general below lock is not required, because hif_lib_xmit_pkt and -+ * hif_lib_event_handler_start are called from napi poll and which is -+ * not re-entrant. But if some client use in different way this lock is -+ * required. -+ */ -+ /*spin_lock_irqsave(&client->rx_lock, flags); */ -+ desc = queue->base + queue->read_idx; -+ if (!(desc->ctrl & CL_DESC_OWN)) { -+ pkt = desc->data - pfe_pkt_headroom; -+ -+ *rx_ctrl = desc->client_ctrl; -+ *desc_ctrl = desc->ctrl; -+ -+ if (desc->ctrl & CL_DESC_FIRST) { -+ u16 size = *rx_ctrl >> HIF_CTRL_RX_OFFSET_OFST; -+ -+ if (size) { -+ size += PFE_PARSE_INFO_SIZE; -+ *len = CL_DESC_BUF_LEN(desc->ctrl) - -+ PFE_PKT_HEADER_SZ - size; -+ *ofst = pfe_pkt_headroom + PFE_PKT_HEADER_SZ -+ + size; -+ *priv_data = desc->data + PFE_PKT_HEADER_SZ; -+ } else { -+ *len = CL_DESC_BUF_LEN(desc->ctrl) - -+ PFE_PKT_HEADER_SZ - PFE_PARSE_INFO_SIZE; -+ *ofst = pfe_pkt_headroom -+ + PFE_PKT_HEADER_SZ -+ + PFE_PARSE_INFO_SIZE; -+ *priv_data = NULL; -+ } -+ -+ } else { -+ *len = CL_DESC_BUF_LEN(desc->ctrl); -+ *ofst = pfe_pkt_headroom; -+ } -+ -+ /* -+ * Needed so we don't free a buffer/page -+ * twice on module_exit -+ */ -+ desc->data = NULL; -+ -+ /* -+ * Ensure everything else is written to DDR before -+ * writing bd->ctrl -+ */ -+ smp_wmb(); -+ -+ desc->ctrl = CL_DESC_BUF_LEN(pfe_pkt_size) | CL_DESC_OWN; -+ queue->read_idx = (queue->read_idx + 1) & (queue->size - 1); -+ } -+ -+ /*spin_unlock_irqrestore(&client->rx_lock, flags); */ -+ return pkt; -+} -+ -+static inline void hif_hdr_write(struct hif_hdr *pkt_hdr, unsigned int -+ client_id, unsigned int qno, -+ u32 client_ctrl) -+{ -+ /* Optimize the write since the destinaton may be non-cacheable */ -+ if (!((unsigned long)pkt_hdr & 0x3)) { -+ ((u32 *)pkt_hdr)[0] = (client_ctrl << 16) | (qno << 8) | -+ client_id; -+ } else { -+ ((u16 *)pkt_hdr)[0] = (qno << 8) | (client_id & 0xFF); -+ ((u16 *)pkt_hdr)[1] = (client_ctrl & 0xFFFF); -+ } -+} -+ -+/*This function puts the given packet in the specific client queue */ -+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void -+ *data, unsigned int len, u32 client_ctrl, -+ unsigned int flags, void *client_data) -+{ -+ struct hif_client_tx_queue *queue = &client->tx_q[qno]; -+ struct tx_queue_desc *desc = queue->base + queue->write_idx; -+ -+ /* First buffer */ -+ if (flags & HIF_FIRST_BUFFER) { -+ data -= sizeof(struct hif_hdr); -+ len += sizeof(struct hif_hdr); -+ -+ hif_hdr_write(data, client->id, qno, client_ctrl); -+ } -+ -+ desc->data = client_data; -+ desc->ctrl = CL_DESC_OWN | CL_DESC_FLAGS(flags); -+ -+ __hif_xmit_pkt(&pfe->hif, client->id, qno, data, len, flags); -+ -+ queue->write_idx = (queue->write_idx + 1) & (queue->size - 1); -+ queue->tx_pending++; -+ queue->jiffies_last_packet = jiffies; -+} -+ -+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno, -+ unsigned int *flags, int count) -+{ -+ struct hif_client_tx_queue *queue = &client->tx_q[qno]; -+ struct tx_queue_desc *desc = queue->base + queue->read_idx; -+ -+ pr_debug("%s: qno : %d rd_indx: %d pending:%d\n", __func__, qno, -+ queue->read_idx, queue->tx_pending); -+ -+ if (!queue->tx_pending) -+ return NULL; -+ -+ if (queue->nocpy_flag && !queue->done_tmu_tx_pkts) { -+ u32 tmu_tx_pkts = be32_to_cpu(pe_dmem_read(TMU0_ID + -+ client->id, TMU_DM_TX_TRANS, 4)); -+ -+ if (queue->prev_tmu_tx_pkts > tmu_tx_pkts) -+ queue->done_tmu_tx_pkts = UINT_MAX - -+ queue->prev_tmu_tx_pkts + tmu_tx_pkts; -+ else -+ queue->done_tmu_tx_pkts = tmu_tx_pkts - -+ queue->prev_tmu_tx_pkts; -+ -+ queue->prev_tmu_tx_pkts = tmu_tx_pkts; -+ -+ if (!queue->done_tmu_tx_pkts) -+ return NULL; -+ } -+ -+ if (desc->ctrl & CL_DESC_OWN) -+ return NULL; -+ -+ queue->read_idx = (queue->read_idx + 1) & (queue->size - 1); -+ queue->tx_pending--; -+ -+ *flags = CL_DESC_GET_FLAGS(desc->ctrl); -+ -+ if (queue->done_tmu_tx_pkts && (*flags & HIF_LAST_BUFFER)) -+ queue->done_tmu_tx_pkts--; -+ -+ return desc->data; -+} -+ -+static void hif_lib_tmu_credit_init(struct pfe *pfe) -+{ -+ int i, q; -+ -+ for (i = 0; i < NUM_GEMAC_SUPPORT; i++) -+ for (q = 0; q < emac_txq_cnt; q++) { -+ pfe->tmu_credit.tx_credit_max[i][q] = (q == 0) ? -+ DEFAULT_Q0_QDEPTH : DEFAULT_MAX_QDEPTH; -+ pfe->tmu_credit.tx_credit[i][q] = -+ pfe->tmu_credit.tx_credit_max[i][q]; -+ } -+} -+ -+/* __hif_lib_update_credit -+ * -+ * @param[in] client hif client context -+ * @param[in] queue queue number in match with TMU -+ */ -+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue) -+{ -+ unsigned int tmu_tx_packets, tmp; -+ -+ if (tx_qos) { -+ tmu_tx_packets = be32_to_cpu(pe_dmem_read(TMU0_ID + -+ client->id, (TMU_DM_TX_TRANS + (queue * 4)), 4)); -+ -+ /* tx_packets counter overflowed */ -+ if (tmu_tx_packets > -+ pfe->tmu_credit.tx_packets[client->id][queue]) { -+ tmp = UINT_MAX - tmu_tx_packets + -+ pfe->tmu_credit.tx_packets[client->id][queue]; -+ -+ pfe->tmu_credit.tx_credit[client->id][queue] = -+ pfe->tmu_credit.tx_credit_max[client->id][queue] - tmp; -+ } else { -+ /* TMU tx <= pfe_eth tx, normal case or both OF since -+ * last time -+ */ -+ pfe->tmu_credit.tx_credit[client->id][queue] = -+ pfe->tmu_credit.tx_credit_max[client->id][queue] - -+ (pfe->tmu_credit.tx_packets[client->id][queue] - -+ tmu_tx_packets); -+ } -+ } -+} -+ -+int pfe_hif_lib_init(struct pfe *pfe) -+{ -+ int rc; -+ -+ pr_info("%s\n", __func__); -+ -+ if (lro_mode) { -+ page_mode = 1; -+ pfe_pkt_size = min(PAGE_SIZE, MAX_PFE_PKT_SIZE); -+ pfe_pkt_headroom = 0; -+ } else { -+ page_mode = 0; -+ pfe_pkt_size = PFE_PKT_SIZE; -+ pfe_pkt_headroom = PFE_PKT_HEADROOM; -+ } -+ -+ if (tx_qos) -+ emac_txq_cnt = EMAC_TXQ_CNT / 2; -+ else -+ emac_txq_cnt = EMAC_TXQ_CNT; -+ -+ hif_lib_tmu_credit_init(pfe); -+ pfe->hif.shm = &ghif_shm; -+ rc = pfe_hif_shm_init(pfe->hif.shm); -+ -+ return rc; -+} -+ -+void pfe_hif_lib_exit(struct pfe *pfe) -+{ -+ pr_info("%s\n", __func__); -+ -+ pfe_hif_shm_clean(pfe->hif.shm); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_hif_lib.h -@@ -0,0 +1,229 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_HIF_LIB_H_ -+#define _PFE_HIF_LIB_H_ -+ -+#include "pfe_hif.h" -+ -+#define HIF_CL_REQ_TIMEOUT 10 -+#define GFP_DMA_PFE 0 -+#define PFE_PARSE_INFO_SIZE 16 -+ -+enum { -+ REQUEST_CL_REGISTER = 0, -+ REQUEST_CL_UNREGISTER, -+ HIF_REQUEST_MAX -+}; -+ -+enum { -+ /* Event to indicate that client rx queue is reached water mark level */ -+ EVENT_HIGH_RX_WM = 0, -+ /* Event to indicate that, packet received for client */ -+ EVENT_RX_PKT_IND, -+ /* Event to indicate that, packet tx done for client */ -+ EVENT_TXDONE_IND, -+ HIF_EVENT_MAX -+}; -+ -+/*structure to store client queue info */ -+ -+/*structure to store client queue info */ -+struct hif_client_rx_queue { -+ struct rx_queue_desc *base; -+ u32 size; -+ u32 read_idx; -+ u32 write_idx; -+}; -+ -+struct hif_client_tx_queue { -+ struct tx_queue_desc *base; -+ u32 size; -+ u32 read_idx; -+ u32 write_idx; -+ u32 tx_pending; -+ unsigned long jiffies_last_packet; -+ u32 nocpy_flag; -+ u32 prev_tmu_tx_pkts; -+ u32 done_tmu_tx_pkts; -+}; -+ -+struct hif_client_s { -+ int id; -+ int tx_qn; -+ int rx_qn; -+ void *rx_qbase; -+ void *tx_qbase; -+ int tx_qsize; -+ int rx_qsize; -+ int cpu_id; -+ struct hif_client_tx_queue tx_q[HIF_CLIENT_QUEUES_MAX]; -+ struct hif_client_rx_queue rx_q[HIF_CLIENT_QUEUES_MAX]; -+ int (*event_handler)(void *priv, int event, int data); -+ unsigned long queue_mask[HIF_EVENT_MAX]; -+ struct pfe *pfe; -+ void *priv; -+}; -+ -+/* -+ * Client specific shared memory -+ * It contains number of Rx/Tx queues, base addresses and queue sizes -+ */ -+struct hif_client_shm { -+ u32 ctrl; /*0-7: number of Rx queues, 8-15: number of tx queues */ -+ unsigned long rx_qbase; /*Rx queue base address */ -+ u32 rx_qsize; /*each Rx queue size, all Rx queues are of same size */ -+ unsigned long tx_qbase; /* Tx queue base address */ -+ u32 tx_qsize; /*each Tx queue size, all Tx queues are of same size */ -+}; -+ -+/*Client shared memory ctrl bit description */ -+#define CLIENT_CTRL_RX_Q_CNT_OFST 0 -+#define CLIENT_CTRL_TX_Q_CNT_OFST 8 -+#define CLIENT_CTRL_RX_Q_CNT(ctrl) (((ctrl) >> CLIENT_CTRL_RX_Q_CNT_OFST) \ -+ & 0xFF) -+#define CLIENT_CTRL_TX_Q_CNT(ctrl) (((ctrl) >> CLIENT_CTRL_TX_Q_CNT_OFST) \ -+ & 0xFF) -+ -+/* -+ * Shared memory used to communicate between HIF driver and host/client drivers -+ * Before starting the hif driver rx_buf_pool ans rx_buf_pool_cnt should be -+ * initialized with host buffers and buffers count in the pool. -+ * rx_buf_pool_cnt should be >= HIF_RX_DESC_NT. -+ * -+ */ -+struct hif_shm { -+ u32 rx_buf_pool_cnt; /*Number of rx buffers available*/ -+ /*Rx buffers required to initialize HIF rx descriptors */ -+ void *rx_buf_pool[HIF_RX_DESC_NT]; -+ unsigned long g_client_status[2]; /*Global client status bit mask */ -+ /* Client specific shared memory */ -+ struct hif_client_shm client[HIF_CLIENTS_MAX]; -+}; -+ -+#define CL_DESC_OWN BIT(31) -+/* This sets owner ship to HIF driver */ -+#define CL_DESC_LAST BIT(30) -+/* This indicates last packet for multi buffers handling */ -+#define CL_DESC_FIRST BIT(29) -+/* This indicates first packet for multi buffers handling */ -+ -+#define CL_DESC_BUF_LEN(x) ((x) & 0xFFFF) -+#define CL_DESC_FLAGS(x) (((x) & 0xF) << 16) -+#define CL_DESC_GET_FLAGS(x) (((x) >> 16) & 0xF) -+ -+struct rx_queue_desc { -+ void *data; -+ u32 ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/ -+ u32 client_ctrl; -+}; -+ -+struct tx_queue_desc { -+ void *data; -+ u32 ctrl; /*0-15bit len, 16-20bit flags, 31bit owner*/ -+}; -+ -+/* HIF Rx is not working properly for 2-byte aligned buffers and -+ * ip_header should be 4byte aligned for better iperformance. -+ * "ip_header = 64 + 6(hif_header) + 14 (MAC Header)" will be 4byte aligned. -+ */ -+#define PFE_PKT_HEADER_SZ sizeof(struct hif_hdr) -+/* must be big enough for headroom, pkt size and skb shared info */ -+#define PFE_BUF_SIZE 2048 -+#define PFE_PKT_HEADROOM 128 -+ -+#define SKB_SHARED_INFO_SIZE SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) -+#define PFE_PKT_SIZE (PFE_BUF_SIZE - PFE_PKT_HEADROOM \ -+ - SKB_SHARED_INFO_SIZE) -+#define MAX_L2_HDR_SIZE 14 /* Not correct for VLAN/PPPoE */ -+#define MAX_L3_HDR_SIZE 20 /* Not correct for IPv6 */ -+#define MAX_L4_HDR_SIZE 60 /* TCP with maximum options */ -+#define MAX_HDR_SIZE (MAX_L2_HDR_SIZE + MAX_L3_HDR_SIZE \ -+ + MAX_L4_HDR_SIZE) -+/* Used in page mode to clamp packet size to the maximum supported by the hif -+ *hw interface (<16KiB) -+ */ -+#define MAX_PFE_PKT_SIZE 16380UL -+ -+extern unsigned int pfe_pkt_size; -+extern unsigned int pfe_pkt_headroom; -+extern unsigned int page_mode; -+extern unsigned int lro_mode; -+extern unsigned int tx_qos; -+extern unsigned int emac_txq_cnt; -+ -+int pfe_hif_lib_init(struct pfe *pfe); -+void pfe_hif_lib_exit(struct pfe *pfe); -+int hif_lib_client_register(struct hif_client_s *client); -+int hif_lib_client_unregister(struct hif_client_s *client); -+void __hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void -+ *data, unsigned int len, u32 client_ctrl, -+ unsigned int flags, void *client_data); -+int hif_lib_xmit_pkt(struct hif_client_s *client, unsigned int qno, void *data, -+ unsigned int len, u32 client_ctrl, void *client_data); -+void hif_lib_indicate_client(int cl_id, int event, int data); -+int hif_lib_event_handler_start(struct hif_client_s *client, int event, int -+ data); -+int hif_lib_tmu_queue_start(struct hif_client_s *client, int qno); -+int hif_lib_tmu_queue_stop(struct hif_client_s *client, int qno); -+void *hif_lib_tx_get_next_complete(struct hif_client_s *client, int qno, -+ unsigned int *flags, int count); -+void *hif_lib_receive_pkt(struct hif_client_s *client, int qno, int *len, int -+ *ofst, unsigned int *rx_ctrl, -+ unsigned int *desc_ctrl, void **priv_data); -+void __hif_lib_update_credit(struct hif_client_s *client, unsigned int queue); -+void hif_lib_set_rx_cpu_affinity(struct hif_client_s *client, int cpu_id); -+void hif_lib_set_tx_queue_nocpy(struct hif_client_s *client, int qno, int -+ enable); -+static inline int hif_lib_tx_avail(struct hif_client_s *client, unsigned int -+ qno) -+{ -+ struct hif_client_tx_queue *queue = &client->tx_q[qno]; -+ -+ return (queue->size - queue->tx_pending); -+} -+ -+static inline int hif_lib_get_tx_wr_index(struct hif_client_s *client, unsigned -+ int qno) -+{ -+ struct hif_client_tx_queue *queue = &client->tx_q[qno]; -+ -+ return queue->write_idx; -+} -+ -+static inline int hif_lib_tx_pending(struct hif_client_s *client, unsigned int -+ qno) -+{ -+ struct hif_client_tx_queue *queue = &client->tx_q[qno]; -+ -+ return queue->tx_pending; -+} -+ -+#define hif_lib_tx_credit_avail(pfe, id, qno) \ -+ ((pfe)->tmu_credit.tx_credit[id][qno]) -+ -+#define hif_lib_tx_credit_max(pfe, id, qno) \ -+ ((pfe)->tmu_credit.tx_credit_max[id][qno]) -+ -+/* -+ * Test comment -+ */ -+#define hif_lib_tx_credit_use(pfe, id, qno, credit) \ -+ ({ typeof(pfe) pfe_ = pfe; \ -+ typeof(id) id_ = id; \ -+ typeof(qno) qno_ = qno; \ -+ typeof(credit) credit_ = credit; \ -+ do { \ -+ if (tx_qos) { \ -+ (pfe_)->tmu_credit.tx_credit[id_][qno_]\ -+ -= credit_; \ -+ (pfe_)->tmu_credit.tx_packets[id_][qno_]\ -+ += credit_; \ -+ } \ -+ } while (0); \ -+ }) -+ -+#endif /* _PFE_HIF_LIB_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_hw.c -@@ -0,0 +1,164 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include "pfe_mod.h" -+#include "pfe_hw.h" -+ -+/* Functions to handle most of pfe hw register initialization */ -+int pfe_hw_init(struct pfe *pfe, int resume) -+{ -+ struct class_cfg class_cfg = { -+ .pe_sys_clk_ratio = PE_SYS_CLK_RATIO, -+ .route_table_baseaddr = pfe->ddr_phys_baseaddr + -+ ROUTE_TABLE_BASEADDR, -+ .route_table_hash_bits = ROUTE_TABLE_HASH_BITS, -+ }; -+ -+ struct tmu_cfg tmu_cfg = { -+ .pe_sys_clk_ratio = PE_SYS_CLK_RATIO, -+ .llm_base_addr = pfe->ddr_phys_baseaddr + TMU_LLM_BASEADDR, -+ .llm_queue_len = TMU_LLM_QUEUE_LEN, -+ }; -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ struct util_cfg util_cfg = { -+ .pe_sys_clk_ratio = PE_SYS_CLK_RATIO, -+ }; -+#endif -+ -+ struct BMU_CFG bmu1_cfg = { -+ .baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR + -+ BMU1_LMEM_BASEADDR), -+ .count = BMU1_BUF_COUNT, -+ .size = BMU1_BUF_SIZE, -+ .low_watermark = 10, -+ .high_watermark = 15, -+ }; -+ -+ struct BMU_CFG bmu2_cfg = { -+ .baseaddr = DDR_PHYS_TO_PFE(pfe->ddr_phys_baseaddr + -+ BMU2_DDR_BASEADDR), -+ .count = BMU2_BUF_COUNT, -+ .size = BMU2_BUF_SIZE, -+ .low_watermark = 250, -+ .high_watermark = 253, -+ }; -+ -+ struct gpi_cfg egpi1_cfg = { -+ .lmem_rtry_cnt = EGPI1_LMEM_RTRY_CNT, -+ .tmlf_txthres = EGPI1_TMLF_TXTHRES, -+ .aseq_len = EGPI1_ASEQ_LEN, -+ .mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC1_BASE_ADDR + -+ EMAC_TCNTRL_REG), -+ }; -+ -+ struct gpi_cfg egpi2_cfg = { -+ .lmem_rtry_cnt = EGPI2_LMEM_RTRY_CNT, -+ .tmlf_txthres = EGPI2_TMLF_TXTHRES, -+ .aseq_len = EGPI2_ASEQ_LEN, -+ .mtip_pause_reg = CBUS_VIRT_TO_PFE(EMAC2_BASE_ADDR + -+ EMAC_TCNTRL_REG), -+ }; -+ -+ struct gpi_cfg hgpi_cfg = { -+ .lmem_rtry_cnt = HGPI_LMEM_RTRY_CNT, -+ .tmlf_txthres = HGPI_TMLF_TXTHRES, -+ .aseq_len = HGPI_ASEQ_LEN, -+ .mtip_pause_reg = 0, -+ }; -+ -+ pr_info("%s\n", __func__); -+ -+#if !defined(LS1012A_PFE_RESET_WA) -+ /* LS1012A needs this to make PE work correctly */ -+ writel(0x3, CLASS_PE_SYS_CLK_RATIO); -+ writel(0x3, TMU_PE_SYS_CLK_RATIO); -+ writel(0x3, UTIL_PE_SYS_CLK_RATIO); -+ usleep_range(10, 20); -+#endif -+ -+ pr_info("CLASS version: %x\n", readl(CLASS_VERSION)); -+ pr_info("TMU version: %x\n", readl(TMU_VERSION)); -+ -+ pr_info("BMU1 version: %x\n", readl(BMU1_BASE_ADDR + -+ BMU_VERSION)); -+ pr_info("BMU2 version: %x\n", readl(BMU2_BASE_ADDR + -+ BMU_VERSION)); -+ -+ pr_info("EGPI1 version: %x\n", readl(EGPI1_BASE_ADDR + -+ GPI_VERSION)); -+ pr_info("EGPI2 version: %x\n", readl(EGPI2_BASE_ADDR + -+ GPI_VERSION)); -+ pr_info("HGPI version: %x\n", readl(HGPI_BASE_ADDR + -+ GPI_VERSION)); -+ -+ pr_info("HIF version: %x\n", readl(HIF_VERSION)); -+ pr_info("HIF NOPCY version: %x\n", readl(HIF_NOCPY_VERSION)); -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ pr_info("UTIL version: %x\n", readl(UTIL_VERSION)); -+#endif -+ while (!(readl(TMU_CTRL) & ECC_MEM_INIT_DONE)) -+ ; -+ -+ hif_rx_disable(); -+ hif_tx_disable(); -+ -+ bmu_init(BMU1_BASE_ADDR, &bmu1_cfg); -+ -+ pr_info("bmu_init(1) done\n"); -+ -+ bmu_init(BMU2_BASE_ADDR, &bmu2_cfg); -+ -+ pr_info("bmu_init(2) done\n"); -+ -+ class_cfg.resume = resume ? 1 : 0; -+ -+ class_init(&class_cfg); -+ -+ pr_info("class_init() done\n"); -+ -+ tmu_init(&tmu_cfg); -+ -+ pr_info("tmu_init() done\n"); -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ util_init(&util_cfg); -+ -+ pr_info("util_init() done\n"); -+#endif -+ gpi_init(EGPI1_BASE_ADDR, &egpi1_cfg); -+ -+ pr_info("gpi_init(1) done\n"); -+ -+ gpi_init(EGPI2_BASE_ADDR, &egpi2_cfg); -+ -+ pr_info("gpi_init(2) done\n"); -+ -+ gpi_init(HGPI_BASE_ADDR, &hgpi_cfg); -+ -+ pr_info("gpi_init(hif) done\n"); -+ -+ bmu_enable(BMU1_BASE_ADDR); -+ -+ pr_info("bmu_enable(1) done\n"); -+ -+ bmu_enable(BMU2_BASE_ADDR); -+ -+ pr_info("bmu_enable(2) done\n"); -+ -+ return 0; -+} -+ -+void pfe_hw_exit(struct pfe *pfe) -+{ -+ pr_info("%s\n", __func__); -+ -+ bmu_disable(BMU1_BASE_ADDR); -+ bmu_reset(BMU1_BASE_ADDR); -+ -+ bmu_disable(BMU2_BASE_ADDR); -+ bmu_reset(BMU2_BASE_ADDR); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_hw.h -@@ -0,0 +1,15 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_HW_H_ -+#define _PFE_HW_H_ -+ -+#define PE_SYS_CLK_RATIO 1 /* SYS/AXI = 250MHz, HFE = 500MHz */ -+ -+int pfe_hw_init(struct pfe *pfe, int resume); -+void pfe_hw_exit(struct pfe *pfe); -+ -+#endif /* _PFE_HW_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_ls1012a_platform.c -@@ -0,0 +1,383 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include <linux/module.h> -+#include <linux/device.h> -+#include <linux/of.h> -+#include <linux/of_net.h> -+#include <linux/of_address.h> -+#include <linux/of_mdio.h> -+#include <linux/platform_device.h> -+#include <linux/slab.h> -+#include <linux/clk.h> -+#include <linux/mfd/syscon.h> -+#include <linux/regmap.h> -+ -+#include "pfe_mod.h" -+ -+extern bool pfe_use_old_dts_phy; -+struct ls1012a_pfe_platform_data pfe_platform_data; -+ -+static int pfe_get_gemac_if_properties(struct device_node *gem, -+ int port, -+ struct ls1012a_pfe_platform_data *pdata) -+{ -+ struct device_node *phy_node = NULL; -+ int size; -+ int phy_id = 0; -+ const u32 *addr; -+ int err; -+ -+ addr = of_get_property(gem, "reg", &size); -+ if (addr) -+ port = be32_to_cpup(addr); -+ else -+ goto err; -+ -+ pdata->ls1012a_eth_pdata[port].gem_id = port; -+ -+ of_get_mac_address(gem, pdata->ls1012a_eth_pdata[port].mac_addr); -+ -+ phy_node = of_parse_phandle(gem, "phy-handle", 0); -+ pdata->ls1012a_eth_pdata[port].phy_node = phy_node; -+ if (phy_node) { -+ pfe_use_old_dts_phy = false; -+ goto process_phynode; -+ } else if (of_phy_is_fixed_link(gem)) { -+ pfe_use_old_dts_phy = false; -+ if (of_phy_register_fixed_link(gem) < 0) { -+ pr_err("broken fixed-link specification\n"); -+ goto err; -+ } -+ phy_node = of_node_get(gem); -+ pdata->ls1012a_eth_pdata[port].phy_node = phy_node; -+ } else if (of_get_property(gem, "fsl,pfe-phy-if-flags", &size)) { -+ pfe_use_old_dts_phy = true; -+ /* Use old dts properties for phy handling */ -+ addr = of_get_property(gem, "fsl,pfe-phy-if-flags", &size); -+ pdata->ls1012a_eth_pdata[port].phy_flags = be32_to_cpup(addr); -+ -+ addr = of_get_property(gem, "fsl,gemac-phy-id", &size); -+ if (!addr) { -+ pr_err("%s:%d Invalid gemac-phy-id....\n", __func__, -+ __LINE__); -+ } else { -+ phy_id = be32_to_cpup(addr); -+ pdata->ls1012a_eth_pdata[port].phy_id = phy_id; -+ pdata->ls1012a_mdio_pdata[0].phy_mask &= ~(1 << phy_id); -+ } -+ -+ /* If PHY is enabled, read mdio properties */ -+ if (pdata->ls1012a_eth_pdata[port].phy_flags & GEMAC_NO_PHY) -+ goto done; -+ -+ } else { -+ pr_info("%s: No PHY or fixed-link\n", __func__); -+ return 0; -+ } -+ -+process_phynode: -+ err = of_get_phy_mode(gem, &pdata->ls1012a_eth_pdata[port].mii_config); -+ if (err) -+ pr_err("%s:%d Incorrect Phy mode....\n", __func__, -+ __LINE__); -+ -+ addr = of_get_property(gem, "fsl,mdio-mux-val", &size); -+ if (!addr) { -+ pr_err("%s: Invalid mdio-mux-val....\n", __func__); -+ } else { -+ phy_id = be32_to_cpup(addr); -+ pdata->ls1012a_eth_pdata[port].mdio_muxval = phy_id; -+ } -+ -+ if (pdata->ls1012a_eth_pdata[port].phy_id < 32) -+ pfe->mdio_muxval[pdata->ls1012a_eth_pdata[port].phy_id] = -+ pdata->ls1012a_eth_pdata[port].mdio_muxval; -+ -+ -+ pdata->ls1012a_mdio_pdata[port].irq[0] = PHY_POLL; -+ -+done: -+ return 0; -+ -+err: -+ return -1; -+} -+ -+/* -+ * -+ * pfe_platform_probe - -+ * -+ * -+ */ -+static int pfe_platform_probe(struct platform_device *pdev) -+{ -+ struct resource res; -+ int ii = 0, rc, interface_count = 0, size = 0; -+ const u32 *prop; -+ struct device_node *np, *gem = NULL; -+ struct clk *pfe_clk; -+ -+ np = pdev->dev.of_node; -+ -+ if (!np) { -+ pr_err("Invalid device node\n"); -+ return -EINVAL; -+ } -+ -+ pfe = kzalloc(sizeof(*pfe), GFP_KERNEL); -+ if (!pfe) { -+ rc = -ENOMEM; -+ goto err_alloc; -+ } -+ -+ platform_set_drvdata(pdev, pfe); -+ -+ if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) { -+ rc = -ENOMEM; -+ pr_err("unable to configure DMA mask.\n"); -+ goto err_ddr; -+ } -+ -+ if (of_address_to_resource(np, 1, &res)) { -+ rc = -ENOMEM; -+ pr_err("failed to get ddr resource\n"); -+ goto err_ddr; -+ } -+ -+ pfe->ddr_phys_baseaddr = res.start; -+ pfe->ddr_size = resource_size(&res); -+ -+ pfe->ddr_baseaddr = memremap(res.start, resource_size(&res), -+ MEMREMAP_WB); -+ if (!pfe->ddr_baseaddr) { -+ pr_err("memremap() ddr failed\n"); -+ rc = -ENOMEM; -+ goto err_ddr; -+ } -+ -+ pfe->scfg = -+ syscon_regmap_lookup_by_phandle(pdev->dev.of_node, -+ "fsl,pfe-scfg"); -+ if (IS_ERR(pfe->scfg)) { -+ dev_err(&pdev->dev, "No syscfg phandle specified\n"); -+ return PTR_ERR(pfe->scfg); -+ } -+ -+ pfe->cbus_baseaddr = of_iomap(np, 0); -+ if (!pfe->cbus_baseaddr) { -+ rc = -ENOMEM; -+ pr_err("failed to get axi resource\n"); -+ goto err_axi; -+ } -+ -+ pfe->hif_irq = platform_get_irq(pdev, 0); -+ if (pfe->hif_irq < 0) { -+ pr_err("platform_get_irq for hif failed\n"); -+ rc = pfe->hif_irq; -+ goto err_hif_irq; -+ } -+ -+ pfe->wol_irq = platform_get_irq(pdev, 2); -+ if (pfe->wol_irq < 0) { -+ pr_err("platform_get_irq for WoL failed\n"); -+ rc = pfe->wol_irq; -+ goto err_hif_irq; -+ } -+ -+ /* Read interface count */ -+ prop = of_get_property(np, "fsl,pfe-num-interfaces", &size); -+ if (!prop) { -+ pr_err("Failed to read number of interfaces\n"); -+ rc = -ENXIO; -+ goto err_prop; -+ } -+ -+ interface_count = be32_to_cpup(prop); -+ if (interface_count <= 0) { -+ pr_err("No ethernet interface count : %d\n", -+ interface_count); -+ rc = -ENXIO; -+ goto err_prop; -+ } -+ -+ pfe_platform_data.ls1012a_mdio_pdata[0].phy_mask = 0xffffffff; -+ -+ while ((gem = of_get_next_child(np, gem))) { -+ if (of_find_property(gem, "reg", &size)) { -+ pfe_get_gemac_if_properties(gem, ii, -+ &pfe_platform_data); -+ ii++; -+ } -+ } -+ -+ if (interface_count != ii) -+ pr_info("missing some of gemac interface properties.\n"); -+ -+ pfe->dev = &pdev->dev; -+ -+ pfe->dev->platform_data = &pfe_platform_data; -+ -+ /* declare WoL capabilities */ -+ device_init_wakeup(&pdev->dev, true); -+ -+ /* find the clocks */ -+ pfe_clk = devm_clk_get(pfe->dev, "pfe"); -+ if (IS_ERR(pfe_clk)) -+ return PTR_ERR(pfe_clk); -+ -+ /* PFE clock is (platform clock / 2) */ -+ /* save sys_clk value as KHz */ -+ pfe->ctrl.sys_clk = clk_get_rate(pfe_clk) / (2 * 1000); -+ -+ rc = pfe_probe(pfe); -+ if (rc < 0) -+ goto err_probe; -+ -+ return 0; -+ -+err_probe: -+err_prop: -+err_hif_irq: -+ iounmap(pfe->cbus_baseaddr); -+ -+err_axi: -+ memunmap(pfe->ddr_baseaddr); -+ -+err_ddr: -+ platform_set_drvdata(pdev, NULL); -+ -+ kfree(pfe); -+ -+err_alloc: -+ return rc; -+} -+ -+/* -+ * pfe_platform_remove - -+ */ -+static int pfe_platform_remove(struct platform_device *pdev) -+{ -+ struct pfe *pfe = platform_get_drvdata(pdev); -+ int rc; -+ -+ pr_info("%s\n", __func__); -+ -+ rc = pfe_remove(pfe); -+ -+ iounmap(pfe->cbus_baseaddr); -+ -+ memunmap(pfe->ddr_baseaddr); -+ -+ platform_set_drvdata(pdev, NULL); -+ -+ kfree(pfe); -+ -+ return rc; -+} -+ -+#ifdef CONFIG_PM -+#ifdef CONFIG_PM_SLEEP -+int pfe_platform_suspend(struct device *dev) -+{ -+ struct pfe *pfe = platform_get_drvdata(to_platform_device(dev)); -+ struct net_device *netdev; -+ int i; -+ -+ pfe->wake = 0; -+ -+ for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) { -+ netdev = pfe->eth.eth_priv[i]->ndev; -+ -+ netif_device_detach(netdev); -+ -+ if (netif_running(netdev)) -+ if (pfe_eth_suspend(netdev)) -+ pfe->wake = 1; -+ } -+ -+ /* Shutdown PFE only if we're not waking up the system */ -+ if (!pfe->wake) { -+#if defined(LS1012A_PFE_RESET_WA) -+ pfe_hif_rx_idle(&pfe->hif); -+#endif -+ pfe_ctrl_suspend(&pfe->ctrl); -+ pfe_firmware_exit(pfe); -+ -+ pfe_hif_exit(pfe); -+ pfe_hif_lib_exit(pfe); -+ -+ pfe_hw_exit(pfe); -+ } -+ -+ return 0; -+} -+ -+static int pfe_platform_resume(struct device *dev) -+{ -+ struct pfe *pfe = platform_get_drvdata(to_platform_device(dev)); -+ struct net_device *netdev; -+ int i; -+ -+ if (!pfe->wake) { -+ pfe_hw_init(pfe, 1); -+ pfe_hif_lib_init(pfe); -+ pfe_hif_init(pfe); -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ util_enable(); -+#endif -+ tmu_enable(0xf); -+ class_enable(); -+ pfe_ctrl_resume(&pfe->ctrl); -+ } -+ -+ for (i = 0; i < (NUM_GEMAC_SUPPORT); i++) { -+ netdev = pfe->eth.eth_priv[i]->ndev; -+ -+ if (pfe->mdio.mdio_priv[i]->mii_bus) -+ pfe_eth_mdio_reset(pfe->mdio.mdio_priv[i]->mii_bus); -+ -+ if (netif_running(netdev)) -+ pfe_eth_resume(netdev); -+ -+ netif_device_attach(netdev); -+ } -+ return 0; -+} -+#else -+#define pfe_platform_suspend NULL -+#define pfe_platform_resume NULL -+#endif -+ -+static const struct dev_pm_ops pfe_platform_pm_ops = { -+ SET_SYSTEM_SLEEP_PM_OPS(pfe_platform_suspend, pfe_platform_resume) -+}; -+#endif -+ -+static const struct of_device_id pfe_match[] = { -+ { -+ .compatible = "fsl,pfe", -+ }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, pfe_match); -+ -+static struct platform_driver pfe_platform_driver = { -+ .probe = pfe_platform_probe, -+ .remove = pfe_platform_remove, -+ .driver = { -+ .name = "pfe", -+ .of_match_table = pfe_match, -+#ifdef CONFIG_PM -+ .pm = &pfe_platform_pm_ops, -+#endif -+ }, -+}; -+ -+module_platform_driver(pfe_platform_driver); -+MODULE_LICENSE("GPL"); -+MODULE_DESCRIPTION("PFE Ethernet driver"); -+MODULE_AUTHOR("NXP DNCPE"); ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_mod.c -@@ -0,0 +1,158 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include <linux/dma-mapping.h> -+#include "pfe_mod.h" -+#include "pfe_cdev.h" -+ -+unsigned int us; -+module_param(us, uint, 0444); -+MODULE_PARM_DESC(us, "0: module enabled for kernel networking (DEFAULT)\n" -+ "1: module enabled for userspace networking\n"); -+struct pfe *pfe; -+ -+/* -+ * pfe_probe - -+ */ -+int pfe_probe(struct pfe *pfe) -+{ -+ int rc; -+ -+ if (pfe->ddr_size < DDR_MAX_SIZE) { -+ pr_err("%s: required DDR memory (%x) above platform ddr memory (%x)\n", -+ __func__, (unsigned int)DDR_MAX_SIZE, pfe->ddr_size); -+ rc = -ENOMEM; -+ goto err_hw; -+ } -+ -+ if (((int)(pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR) & -+ (8 * SZ_1M - 1)) != 0) { -+ pr_err("%s: BMU2 base address (0x%x) must be aligned on 8MB boundary\n", -+ __func__, (int)pfe->ddr_phys_baseaddr + -+ BMU2_DDR_BASEADDR); -+ rc = -ENOMEM; -+ goto err_hw; -+ } -+ -+ pr_info("cbus_baseaddr: %lx, ddr_baseaddr: %lx, ddr_phys_baseaddr: %lx, ddr_size: %x\n", -+ (unsigned long)pfe->cbus_baseaddr, -+ (unsigned long)pfe->ddr_baseaddr, -+ pfe->ddr_phys_baseaddr, pfe->ddr_size); -+ -+ pfe_lib_init(pfe->cbus_baseaddr, pfe->ddr_baseaddr, -+ pfe->ddr_phys_baseaddr, pfe->ddr_size); -+ -+ rc = pfe_hw_init(pfe, 0); -+ if (rc < 0) -+ goto err_hw; -+ -+ if (us) -+ goto firmware_init; -+ -+ rc = pfe_hif_lib_init(pfe); -+ if (rc < 0) -+ goto err_hif_lib; -+ -+ rc = pfe_hif_init(pfe); -+ if (rc < 0) -+ goto err_hif; -+ -+firmware_init: -+ rc = pfe_firmware_init(pfe); -+ if (rc < 0) -+ goto err_firmware; -+ -+ rc = pfe_ctrl_init(pfe); -+ if (rc < 0) -+ goto err_ctrl; -+ -+ rc = pfe_eth_init(pfe); -+ if (rc < 0) -+ goto err_eth; -+ -+ rc = pfe_sysfs_init(pfe); -+ if (rc < 0) -+ goto err_sysfs; -+ -+ rc = pfe_debugfs_init(pfe); -+ if (rc < 0) -+ goto err_debugfs; -+ -+ if (us) { -+ /* Creating a character device */ -+ rc = pfe_cdev_init(); -+ if (rc < 0) -+ goto err_cdev; -+ } -+ -+ return 0; -+ -+err_cdev: -+ pfe_debugfs_exit(pfe); -+ -+err_debugfs: -+ pfe_sysfs_exit(pfe); -+ -+err_sysfs: -+ pfe_eth_exit(pfe); -+ -+err_eth: -+ pfe_ctrl_exit(pfe); -+ -+err_ctrl: -+ pfe_firmware_exit(pfe); -+ -+err_firmware: -+ if (us) -+ goto err_hif_lib; -+ -+ pfe_hif_exit(pfe); -+ -+err_hif: -+ pfe_hif_lib_exit(pfe); -+ -+err_hif_lib: -+ pfe_hw_exit(pfe); -+ -+err_hw: -+ return rc; -+} -+ -+/* -+ * pfe_remove - -+ */ -+int pfe_remove(struct pfe *pfe) -+{ -+ pr_info("%s\n", __func__); -+ -+ if (us) -+ pfe_cdev_exit(); -+ -+ pfe_debugfs_exit(pfe); -+ -+ pfe_sysfs_exit(pfe); -+ -+ pfe_eth_exit(pfe); -+ -+ pfe_ctrl_exit(pfe); -+ -+#if defined(LS1012A_PFE_RESET_WA) -+ pfe_hif_rx_idle(&pfe->hif); -+#endif -+ pfe_firmware_exit(pfe); -+ -+ if (us) -+ goto hw_exit; -+ -+ pfe_hif_exit(pfe); -+ -+ pfe_hif_lib_exit(pfe); -+ -+hw_exit: -+ pfe_hw_exit(pfe); -+ -+ return 0; -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_mod.h -@@ -0,0 +1,103 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_MOD_H_ -+#define _PFE_MOD_H_ -+ -+#include <linux/device.h> -+#include <linux/elf.h> -+ -+extern unsigned int us; -+ -+struct pfe; -+ -+#include "pfe_hw.h" -+#include "pfe_firmware.h" -+#include "pfe_ctrl.h" -+#include "pfe_hif.h" -+#include "pfe_hif_lib.h" -+#include "pfe_eth.h" -+#include "pfe_sysfs.h" -+#include "pfe_perfmon.h" -+#include "pfe_debugfs.h" -+ -+#define PHYID_MAX_VAL 32 -+ -+struct pfe_tmu_credit { -+ /* Number of allowed TX packet in-flight, matches TMU queue size */ -+ unsigned int tx_credit[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT]; -+ unsigned int tx_credit_max[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT]; -+ unsigned int tx_packets[NUM_GEMAC_SUPPORT][EMAC_TXQ_CNT]; -+}; -+ -+struct pfe { -+ struct regmap *scfg; -+ unsigned long ddr_phys_baseaddr; -+ void *ddr_baseaddr; -+ unsigned int ddr_size; -+ void *cbus_baseaddr; -+ void *apb_baseaddr; -+ unsigned long iram_phys_baseaddr; -+ void *iram_baseaddr; -+ unsigned long ipsec_phys_baseaddr; -+ void *ipsec_baseaddr; -+ int hif_irq; -+ int wol_irq; -+ int hif_client_irq; -+ struct device *dev; -+ struct dentry *dentry; -+ struct pfe_ctrl ctrl; -+ struct pfe_hif hif; -+ struct pfe_eth eth; -+ struct pfe_mdio mdio; -+ struct hif_client_s *hif_client[HIF_CLIENTS_MAX]; -+#if defined(CFG_DIAGS) -+ struct pfe_diags diags; -+#endif -+ struct pfe_tmu_credit tmu_credit; -+ struct pfe_cpumon cpumon; -+ struct pfe_memmon memmon; -+ int wake; -+ int mdio_muxval[PHYID_MAX_VAL]; -+ struct clk *hfe_clock; -+}; -+ -+extern struct pfe *pfe; -+ -+int pfe_probe(struct pfe *pfe); -+int pfe_remove(struct pfe *pfe); -+ -+/* DDR Mapping in reserved memory*/ -+#define ROUTE_TABLE_BASEADDR 0 -+#define ROUTE_TABLE_HASH_BITS 15 /* 32K entries */ -+#define ROUTE_TABLE_SIZE ((1 << ROUTE_TABLE_HASH_BITS) \ -+ * CLASS_ROUTE_SIZE) -+#define BMU2_DDR_BASEADDR (ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE) -+#define BMU2_BUF_COUNT (4096 - 256) -+/* This is to get a total DDR size of 12MiB */ -+#define BMU2_DDR_SIZE (DDR_BUF_SIZE * BMU2_BUF_COUNT) -+#define UTIL_CODE_BASEADDR (BMU2_DDR_BASEADDR + BMU2_DDR_SIZE) -+#define UTIL_CODE_SIZE (128 * SZ_1K) -+#define UTIL_DDR_DATA_BASEADDR (UTIL_CODE_BASEADDR + UTIL_CODE_SIZE) -+#define UTIL_DDR_DATA_SIZE (64 * SZ_1K) -+#define CLASS_DDR_DATA_BASEADDR (UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE) -+#define CLASS_DDR_DATA_SIZE (32 * SZ_1K) -+#define TMU_DDR_DATA_BASEADDR (CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE) -+#define TMU_DDR_DATA_SIZE (32 * SZ_1K) -+#define TMU_LLM_BASEADDR (TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE) -+#define TMU_LLM_QUEUE_LEN (8 * 512) -+/* Must be power of two and at least 16 * 8 = 128 bytes */ -+#define TMU_LLM_SIZE (4 * 16 * TMU_LLM_QUEUE_LEN) -+/* (4 TMU's x 16 queues x queue_len) */ -+ -+#define DDR_MAX_SIZE (TMU_LLM_BASEADDR + TMU_LLM_SIZE) -+ -+/* LMEM Mapping */ -+#define BMU1_LMEM_BASEADDR 0 -+#define BMU1_BUF_COUNT 256 -+#define BMU1_LMEM_SIZE (LMEM_BUF_SIZE * BMU1_BUF_COUNT) -+ -+#endif /* _PFE_MOD_H */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_perfmon.h -@@ -0,0 +1,26 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_PERFMON_H_ -+#define _PFE_PERFMON_H_ -+ -+#include "pfe/pfe.h" -+ -+#define CT_CPUMON_INTERVAL (1 * TIMER_TICKS_PER_SEC) -+ -+struct pfe_cpumon { -+ u32 cpu_usage_pct[MAX_PE]; -+ u32 class_usage_pct; -+}; -+ -+struct pfe_memmon { -+ u32 kernel_memory_allocated; -+}; -+ -+int pfe_perfmon_init(struct pfe *pfe); -+void pfe_perfmon_exit(struct pfe *pfe); -+ -+#endif /* _PFE_PERFMON_H_ */ ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.c -@@ -0,0 +1,840 @@ -+// SPDX-License-Identifier: GPL-2.0+ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#include <linux/module.h> -+#include <linux/platform_device.h> -+ -+#include "pfe_mod.h" -+ -+#define PE_EXCEPTION_DUMP_ADDRESS 0x1fa8 -+#define NUM_QUEUES 16 -+ -+static char register_name[20][5] = { -+ "EPC", "ECAS", "EID", "ED", -+ "r0", "r1", "r2", "r3", -+ "r4", "r5", "r6", "r7", -+ "r8", "r9", "r10", "r11", -+ "r12", "r13", "r14", "r15", -+}; -+ -+static char exception_name[14][20] = { -+ "Reset", -+ "HardwareFailure", -+ "NMI", -+ "InstBreakpoint", -+ "DataBreakpoint", -+ "Unsupported", -+ "PrivilegeViolation", -+ "InstBusError", -+ "DataBusError", -+ "AlignmentError", -+ "ArithmeticError", -+ "SystemCall", -+ "MemoryManagement", -+ "Interrupt", -+}; -+ -+static unsigned long class_do_clear; -+static unsigned long tmu_do_clear; -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+static unsigned long util_do_clear; -+#endif -+ -+static ssize_t display_pe_status(char *buf, int id, u32 dmem_addr, unsigned long -+ do_clear) -+{ -+ ssize_t len = 0; -+ u32 val; -+ char statebuf[5]; -+ struct pfe_cpumon *cpumon = &pfe->cpumon; -+ u32 debug_indicator; -+ u32 debug[20]; -+ -+ if (id < CLASS0_ID || id >= MAX_PE) -+ return len; -+ -+ *(u32 *)statebuf = pe_dmem_read(id, dmem_addr, 4); -+ dmem_addr += 4; -+ -+ statebuf[4] = '\0'; -+ len += sprintf(buf + len, "state=%4s ", statebuf); -+ -+ val = pe_dmem_read(id, dmem_addr, 4); -+ dmem_addr += 4; -+ len += sprintf(buf + len, "ctr=%08x ", cpu_to_be32(val)); -+ -+ val = pe_dmem_read(id, dmem_addr, 4); -+ if (do_clear && val) -+ pe_dmem_write(id, 0, dmem_addr, 4); -+ dmem_addr += 4; -+ len += sprintf(buf + len, "rx=%u ", cpu_to_be32(val)); -+ -+ val = pe_dmem_read(id, dmem_addr, 4); -+ if (do_clear && val) -+ pe_dmem_write(id, 0, dmem_addr, 4); -+ dmem_addr += 4; -+ if (id >= TMU0_ID && id <= TMU_MAX_ID) -+ len += sprintf(buf + len, "qstatus=%x", cpu_to_be32(val)); -+ else -+ len += sprintf(buf + len, "tx=%u", cpu_to_be32(val)); -+ -+ val = pe_dmem_read(id, dmem_addr, 4); -+ if (do_clear && val) -+ pe_dmem_write(id, 0, dmem_addr, 4); -+ dmem_addr += 4; -+ if (val) -+ len += sprintf(buf + len, " drop=%u", cpu_to_be32(val)); -+ -+ len += sprintf(buf + len, " load=%d%%", cpumon->cpu_usage_pct[id]); -+ -+ len += sprintf(buf + len, "\n"); -+ -+ debug_indicator = pe_dmem_read(id, dmem_addr, 4); -+ dmem_addr += 4; -+ if (!strncmp((char *)&debug_indicator, "DBUG", 4)) { -+ int j, last = 0; -+ -+ for (j = 0; j < 16; j++) { -+ debug[j] = pe_dmem_read(id, dmem_addr, 4); -+ if (debug[j]) { -+ if (do_clear) -+ pe_dmem_write(id, 0, dmem_addr, 4); -+ last = j + 1; -+ } -+ dmem_addr += 4; -+ } -+ for (j = 0; j < last; j++) { -+ len += sprintf(buf + len, "%08x%s", -+ cpu_to_be32(debug[j]), -+ (j & 0x7) == 0x7 || j == last - 1 ? "\n" : " "); -+ } -+ } -+ -+ if (!strncmp(statebuf, "DEAD", 4)) { -+ u32 i, dump = PE_EXCEPTION_DUMP_ADDRESS; -+ -+ len += sprintf(buf + len, "Exception details:\n"); -+ for (i = 0; i < 20; i++) { -+ debug[i] = pe_dmem_read(id, dump, 4); -+ dump += 4; -+ if (i == 2) -+ len += sprintf(buf + len, "%4s = %08x (=%s) ", -+ register_name[i], cpu_to_be32(debug[i]), -+ exception_name[min((u32) -+ cpu_to_be32(debug[i]), (u32)13)]); -+ else -+ len += sprintf(buf + len, "%4s = %08x%s", -+ register_name[i], cpu_to_be32(debug[i]), -+ (i & 0x3) == 0x3 || i == 19 ? "\n" : " "); -+ } -+ } -+ -+ return len; -+} -+ -+static ssize_t class_phy_stats(char *buf, int phy) -+{ -+ ssize_t len = 0; -+ int off1 = phy * 0x28; -+ int off2 = phy * 0x10; -+ -+ if (phy == 3) -+ off1 = CLASS_PHY4_RX_PKTS - CLASS_PHY1_RX_PKTS; -+ -+ len += sprintf(buf + len, "phy: %d\n", phy); -+ len += sprintf(buf + len, -+ " rx: %10u, tx: %10u, intf: %10u, ipv4: %10u, ipv6: %10u\n", -+ readl(CLASS_PHY1_RX_PKTS + off1), -+ readl(CLASS_PHY1_TX_PKTS + off1), -+ readl(CLASS_PHY1_INTF_MATCH_PKTS + off1), -+ readl(CLASS_PHY1_V4_PKTS + off1), -+ readl(CLASS_PHY1_V6_PKTS + off1)); -+ -+ len += sprintf(buf + len, -+ " icmp: %10u, igmp: %10u, tcp: %10u, udp: %10u\n", -+ readl(CLASS_PHY1_ICMP_PKTS + off2), -+ readl(CLASS_PHY1_IGMP_PKTS + off2), -+ readl(CLASS_PHY1_TCP_PKTS + off2), -+ readl(CLASS_PHY1_UDP_PKTS + off2)); -+ -+ len += sprintf(buf + len, " err\n"); -+ len += sprintf(buf + len, -+ " lp: %10u, intf: %10u, l3: %10u, chcksum: %10u, ttl: %10u\n", -+ readl(CLASS_PHY1_LP_FAIL_PKTS + off1), -+ readl(CLASS_PHY1_INTF_FAIL_PKTS + off1), -+ readl(CLASS_PHY1_L3_FAIL_PKTS + off1), -+ readl(CLASS_PHY1_CHKSUM_ERR_PKTS + off1), -+ readl(CLASS_PHY1_TTL_ERR_PKTS + off1)); -+ -+ return len; -+} -+ -+/* qm_read_drop_stat -+ * This function is used to read the drop statistics from the TMU -+ * hw drop counter. Since the hw counter is always cleared afer -+ * reading, this function maintains the previous drop count, and -+ * adds the new value to it. That value can be retrieved by -+ * passing a pointer to it with the total_drops arg. -+ * -+ * @param tmu TMU number (0 - 3) -+ * @param queue queue number (0 - 15) -+ * @param total_drops pointer to location to store total drops (or NULL) -+ * @param do_reset if TRUE, clear total drops after updating -+ */ -+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset) -+{ -+ static u32 qtotal[TMU_MAX_ID + 1][NUM_QUEUES]; -+ u32 val; -+ -+ writel((tmu << 8) | queue, TMU_TEQ_CTRL); -+ writel((tmu << 8) | queue, TMU_LLM_CTRL); -+ val = readl(TMU_TEQ_DROP_STAT); -+ qtotal[tmu][queue] += val; -+ if (total_drops) -+ *total_drops = qtotal[tmu][queue]; -+ if (do_reset) -+ qtotal[tmu][queue] = 0; -+ return val; -+} -+ -+static ssize_t tmu_queue_stats(char *buf, int tmu, int queue) -+{ -+ ssize_t len = 0; -+ u32 drops; -+ -+ len += sprintf(buf + len, "%d-%02d, ", tmu, queue); -+ -+ drops = qm_read_drop_stat(tmu, queue, NULL, 0); -+ -+ /* Select queue */ -+ writel((tmu << 8) | queue, TMU_TEQ_CTRL); -+ writel((tmu << 8) | queue, TMU_LLM_CTRL); -+ -+ len += sprintf(buf + len, -+ "(teq) drop: %10u, tx: %10u (llm) head: %08x, tail: %08x, drop: %10u\n", -+ drops, readl(TMU_TEQ_TRANS_STAT), -+ readl(TMU_LLM_QUE_HEADPTR), readl(TMU_LLM_QUE_TAILPTR), -+ readl(TMU_LLM_QUE_DROPCNT)); -+ -+ return len; -+} -+ -+static ssize_t tmu_queues(char *buf, int tmu) -+{ -+ ssize_t len = 0; -+ int queue; -+ -+ for (queue = 0; queue < 16; queue++) -+ len += tmu_queue_stats(buf + len, tmu, queue); -+ -+ return len; -+} -+ -+static ssize_t block_version(char *buf, void *addr) -+{ -+ ssize_t len = 0; -+ u32 val; -+ -+ val = readl(addr); -+ len += sprintf(buf + len, "revision: %x, version: %x, id: %x\n", -+ (val >> 24) & 0xff, (val >> 16) & 0xff, val & 0xffff); -+ -+ return len; -+} -+ -+static ssize_t bmu(char *buf, int id, void *base) -+{ -+ ssize_t len = 0; -+ -+ len += sprintf(buf + len, "%s: %d\n ", __func__, id); -+ -+ len += block_version(buf + len, base + BMU_VERSION); -+ -+ len += sprintf(buf + len, " buf size: %x\n", (1 << readl(base + -+ BMU_BUF_SIZE))); -+ len += sprintf(buf + len, " buf count: %x\n", readl(base + -+ BMU_BUF_CNT)); -+ len += sprintf(buf + len, " buf rem: %x\n", readl(base + -+ BMU_REM_BUF_CNT)); -+ len += sprintf(buf + len, " buf curr: %x\n", readl(base + -+ BMU_CURR_BUF_CNT)); -+ len += sprintf(buf + len, " free err: %x\n", readl(base + -+ BMU_FREE_ERR_ADDR)); -+ -+ return len; -+} -+ -+static ssize_t gpi(char *buf, int id, void *base) -+{ -+ ssize_t len = 0; -+ u32 val; -+ -+ len += sprintf(buf + len, "%s%d:\n ", __func__, id); -+ len += block_version(buf + len, base + GPI_VERSION); -+ -+ len += sprintf(buf + len, " tx under stick: %x\n", readl(base + -+ GPI_FIFO_STATUS)); -+ val = readl(base + GPI_FIFO_DEBUG); -+ len += sprintf(buf + len, " tx pkts: %x\n", (val >> 23) & -+ 0x3f); -+ len += sprintf(buf + len, " rx pkts: %x\n", (val >> 18) & -+ 0x3f); -+ len += sprintf(buf + len, " tx bytes: %x\n", (val >> 9) & -+ 0x1ff); -+ len += sprintf(buf + len, " rx bytes: %x\n", (val >> 0) & -+ 0x1ff); -+ len += sprintf(buf + len, " overrun: %x\n", readl(base + -+ GPI_OVERRUN_DROPCNT)); -+ -+ return len; -+} -+ -+static ssize_t pfe_set_class(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ class_do_clear = kstrtoul(buf, 0, 0); -+ return count; -+} -+ -+static ssize_t pfe_show_class(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t len = 0; -+ int id; -+ u32 val; -+ struct pfe_cpumon *cpumon = &pfe->cpumon; -+ -+ len += block_version(buf + len, CLASS_VERSION); -+ -+ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) { -+ len += sprintf(buf + len, "%d: ", id - CLASS0_ID); -+ -+ val = readl(CLASS_PE0_DEBUG + id * 4); -+ len += sprintf(buf + len, "pc=1%04x ", val & 0xffff); -+ -+ len += display_pe_status(buf + len, id, CLASS_DM_PESTATUS, -+ class_do_clear); -+ } -+ len += sprintf(buf + len, "aggregate load=%d%%\n\n", -+ cpumon->class_usage_pct); -+ -+ len += sprintf(buf + len, "pe status: 0x%x\n", -+ readl(CLASS_PE_STATUS)); -+ len += sprintf(buf + len, "max buf cnt: 0x%x afull thres: 0x%x\n", -+ readl(CLASS_MAX_BUF_CNT), readl(CLASS_AFULL_THRES)); -+ len += sprintf(buf + len, "tsq max cnt: 0x%x tsq fifo thres: 0x%x\n", -+ readl(CLASS_TSQ_MAX_CNT), readl(CLASS_TSQ_FIFO_THRES)); -+ len += sprintf(buf + len, "state: 0x%x\n", readl(CLASS_STATE)); -+ -+ len += class_phy_stats(buf + len, 0); -+ len += class_phy_stats(buf + len, 1); -+ len += class_phy_stats(buf + len, 2); -+ len += class_phy_stats(buf + len, 3); -+ -+ return len; -+} -+ -+static ssize_t pfe_set_tmu(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ tmu_do_clear = kstrtoul(buf, 0, 0); -+ return count; -+} -+ -+static ssize_t pfe_show_tmu(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t len = 0; -+ int id; -+ u32 val; -+ -+ len += block_version(buf + len, TMU_VERSION); -+ -+ for (id = TMU0_ID; id <= TMU_MAX_ID; id++) { -+ if (id == TMU2_ID) -+ continue; -+ len += sprintf(buf + len, "%d: ", id - TMU0_ID); -+ -+ len += display_pe_status(buf + len, id, TMU_DM_PESTATUS, -+ tmu_do_clear); -+ } -+ -+ len += sprintf(buf + len, "pe status: %x\n", readl(TMU_PE_STATUS)); -+ len += sprintf(buf + len, "inq fifo cnt: %x\n", -+ readl(TMU_PHY_INQ_FIFO_CNT)); -+ val = readl(TMU_INQ_STAT); -+ len += sprintf(buf + len, "inq wr ptr: %x\n", val & 0x3ff); -+ len += sprintf(buf + len, "inq rd ptr: %x\n", val >> 10); -+ -+ return len; -+} -+ -+static unsigned long drops_do_clear; -+static u32 class_drop_counter[CLASS_NUM_DROP_COUNTERS]; -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+static u32 util_drop_counter[UTIL_NUM_DROP_COUNTERS]; -+#endif -+ -+char *class_drop_description[CLASS_NUM_DROP_COUNTERS] = { -+ "ICC", -+ "Host Pkt Error", -+ "Rx Error", -+ "IPsec Outbound", -+ "IPsec Inbound", -+ "EXPT IPsec Error", -+ "Reassembly", -+ "Fragmenter", -+ "NAT-T", -+ "Socket", -+ "Multicast", -+ "NAT-PT", -+ "Tx Disabled", -+}; -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+char *util_drop_description[UTIL_NUM_DROP_COUNTERS] = { -+ "IPsec Outbound", -+ "IPsec Inbound", -+ "IPsec Rate Limiter", -+ "Fragmenter", -+ "Socket", -+ "Tx Disabled", -+ "Rx Error", -+}; -+#endif -+ -+static ssize_t pfe_set_drops(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ drops_do_clear = kstrtoul(buf, 0, 0); -+ return count; -+} -+ -+static u32 tmu_drops[4][16]; -+static ssize_t pfe_show_drops(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t len = 0; -+ int id, dropnum; -+ int tmu, queue; -+ u32 val; -+ u32 dmem_addr; -+ int num_class_drops = 0, num_tmu_drops = 0, num_util_drops = 0; -+ struct pfe_ctrl *ctrl = &pfe->ctrl; -+ -+ memset(class_drop_counter, 0, sizeof(class_drop_counter)); -+ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) { -+ if (drops_do_clear) -+ pe_sync_stop(ctrl, (1 << id)); -+ for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS; -+ dropnum++) { -+ dmem_addr = CLASS_DM_DROP_CNTR; -+ val = be32_to_cpu(pe_dmem_read(id, dmem_addr, 4)); -+ class_drop_counter[dropnum] += val; -+ num_class_drops += val; -+ if (drops_do_clear) -+ pe_dmem_write(id, 0, dmem_addr, 4); -+ } -+ if (drops_do_clear) -+ pe_start(ctrl, (1 << id)); -+ } -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ if (drops_do_clear) -+ pe_sync_stop(ctrl, (1 << UTIL_ID)); -+ for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) { -+ dmem_addr = UTIL_DM_DROP_CNTR; -+ val = be32_to_cpu(pe_dmem_read(UTIL_ID, dmem_addr, 4)); -+ util_drop_counter[dropnum] = val; -+ num_util_drops += val; -+ if (drops_do_clear) -+ pe_dmem_write(UTIL_ID, 0, dmem_addr, 4); -+ } -+ if (drops_do_clear) -+ pe_start(ctrl, (1 << UTIL_ID)); -+#endif -+ for (tmu = 0; tmu < 4; tmu++) { -+ for (queue = 0; queue < 16; queue++) { -+ qm_read_drop_stat(tmu, queue, &tmu_drops[tmu][queue], -+ drops_do_clear); -+ num_tmu_drops += tmu_drops[tmu][queue]; -+ } -+ } -+ -+ if (num_class_drops == 0 && num_util_drops == 0 && num_tmu_drops == 0) -+ len += sprintf(buf + len, "No PE drops\n\n"); -+ -+ if (num_class_drops > 0) { -+ len += sprintf(buf + len, "Class PE drops --\n"); -+ for (dropnum = 0; dropnum < CLASS_NUM_DROP_COUNTERS; -+ dropnum++) { -+ if (class_drop_counter[dropnum] > 0) -+ len += sprintf(buf + len, " %s: %d\n", -+ class_drop_description[dropnum], -+ class_drop_counter[dropnum]); -+ } -+ len += sprintf(buf + len, "\n"); -+ } -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ if (num_util_drops > 0) { -+ len += sprintf(buf + len, "Util PE drops --\n"); -+ for (dropnum = 0; dropnum < UTIL_NUM_DROP_COUNTERS; dropnum++) { -+ if (util_drop_counter[dropnum] > 0) -+ len += sprintf(buf + len, " %s: %d\n", -+ util_drop_description[dropnum], -+ util_drop_counter[dropnum]); -+ } -+ len += sprintf(buf + len, "\n"); -+ } -+#endif -+ if (num_tmu_drops > 0) { -+ len += sprintf(buf + len, "TMU drops --\n"); -+ for (tmu = 0; tmu < 4; tmu++) { -+ for (queue = 0; queue < 16; queue++) { -+ if (tmu_drops[tmu][queue] > 0) -+ len += sprintf(buf + len, -+ " TMU%d-Q%d: %d\n" -+ , tmu, queue, tmu_drops[tmu][queue]); -+ } -+ } -+ len += sprintf(buf + len, "\n"); -+ } -+ -+ return len; -+} -+ -+static ssize_t pfe_show_tmu0_queues(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ return tmu_queues(buf, 0); -+} -+ -+static ssize_t pfe_show_tmu1_queues(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ return tmu_queues(buf, 1); -+} -+ -+static ssize_t pfe_show_tmu2_queues(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ return tmu_queues(buf, 2); -+} -+ -+static ssize_t pfe_show_tmu3_queues(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ return tmu_queues(buf, 3); -+} -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+static ssize_t pfe_set_util(struct device *dev, struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ util_do_clear = kstrtoul(buf, NULL, 0); -+ return count; -+} -+ -+static ssize_t pfe_show_util(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t len = 0; -+ struct pfe_ctrl *ctrl = &pfe->ctrl; -+ -+ len += block_version(buf + len, UTIL_VERSION); -+ -+ pe_sync_stop(ctrl, (1 << UTIL_ID)); -+ len += display_pe_status(buf + len, UTIL_ID, UTIL_DM_PESTATUS, -+ util_do_clear); -+ pe_start(ctrl, (1 << UTIL_ID)); -+ -+ len += sprintf(buf + len, "pe status: %x\n", readl(UTIL_PE_STATUS)); -+ len += sprintf(buf + len, "max buf cnt: %x\n", -+ readl(UTIL_MAX_BUF_CNT)); -+ len += sprintf(buf + len, "tsq max cnt: %x\n", -+ readl(UTIL_TSQ_MAX_CNT)); -+ -+ return len; -+} -+#endif -+ -+static ssize_t pfe_show_bmu(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t len = 0; -+ -+ len += bmu(buf + len, 1, BMU1_BASE_ADDR); -+ len += bmu(buf + len, 2, BMU2_BASE_ADDR); -+ -+ return len; -+} -+ -+static ssize_t pfe_show_hif(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t len = 0; -+ -+ len += sprintf(buf + len, "hif:\n "); -+ len += block_version(buf + len, HIF_VERSION); -+ -+ len += sprintf(buf + len, " tx curr bd: %x\n", -+ readl(HIF_TX_CURR_BD_ADDR)); -+ len += sprintf(buf + len, " tx status: %x\n", -+ readl(HIF_TX_STATUS)); -+ len += sprintf(buf + len, " tx dma status: %x\n", -+ readl(HIF_TX_DMA_STATUS)); -+ -+ len += sprintf(buf + len, " rx curr bd: %x\n", -+ readl(HIF_RX_CURR_BD_ADDR)); -+ len += sprintf(buf + len, " rx status: %x\n", -+ readl(HIF_RX_STATUS)); -+ len += sprintf(buf + len, " rx dma status: %x\n", -+ readl(HIF_RX_DMA_STATUS)); -+ -+ len += sprintf(buf + len, "hif nocopy:\n "); -+ len += block_version(buf + len, HIF_NOCPY_VERSION); -+ -+ len += sprintf(buf + len, " tx curr bd: %x\n", -+ readl(HIF_NOCPY_TX_CURR_BD_ADDR)); -+ len += sprintf(buf + len, " tx status: %x\n", -+ readl(HIF_NOCPY_TX_STATUS)); -+ len += sprintf(buf + len, " tx dma status: %x\n", -+ readl(HIF_NOCPY_TX_DMA_STATUS)); -+ -+ len += sprintf(buf + len, " rx curr bd: %x\n", -+ readl(HIF_NOCPY_RX_CURR_BD_ADDR)); -+ len += sprintf(buf + len, " rx status: %x\n", -+ readl(HIF_NOCPY_RX_STATUS)); -+ len += sprintf(buf + len, " rx dma status: %x\n", -+ readl(HIF_NOCPY_RX_DMA_STATUS)); -+ -+ return len; -+} -+ -+static ssize_t pfe_show_gpi(struct device *dev, struct device_attribute *attr, -+ char *buf) -+{ -+ ssize_t len = 0; -+ -+ len += gpi(buf + len, 0, EGPI1_BASE_ADDR); -+ len += gpi(buf + len, 1, EGPI2_BASE_ADDR); -+ len += gpi(buf + len, 3, HGPI_BASE_ADDR); -+ -+ return len; -+} -+ -+static ssize_t pfe_show_pfemem(struct device *dev, struct device_attribute -+ *attr, char *buf) -+{ -+ ssize_t len = 0; -+ struct pfe_memmon *memmon = &pfe->memmon; -+ -+ len += sprintf(buf + len, "Kernel Memory: %d Bytes (%d KB)\n", -+ memmon->kernel_memory_allocated, -+ (memmon->kernel_memory_allocated + 1023) / 1024); -+ -+ return len; -+} -+ -+static ssize_t pfe_show_crc_revalidated(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ u64 crc_validated = 0; -+ ssize_t len = 0; -+ int id, phyid; -+ -+ len += sprintf(buf + len, "FCS re-validated by PFE:\n"); -+ -+ for (phyid = 0; phyid < 2; phyid++) { -+ crc_validated = 0; -+ for (id = CLASS0_ID; id <= CLASS_MAX_ID; id++) { -+ crc_validated += be32_to_cpu(pe_dmem_read(id, -+ CLASS_DM_CRC_VALIDATED + (phyid * 4), 4)); -+ } -+ len += sprintf(buf + len, "MAC %d:\n count:%10llu\n", -+ phyid, crc_validated); -+ } -+ -+ return len; -+} -+ -+#ifdef HIF_NAPI_STATS -+static ssize_t pfe_show_hif_napi_stats(struct device *dev, -+ struct device_attribute *attr, -+ char *buf) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct pfe *pfe = platform_get_drvdata(pdev); -+ ssize_t len = 0; -+ -+ len += sprintf(buf + len, "sched: %u\n", -+ pfe->hif.napi_counters[NAPI_SCHED_COUNT]); -+ len += sprintf(buf + len, "poll: %u\n", -+ pfe->hif.napi_counters[NAPI_POLL_COUNT]); -+ len += sprintf(buf + len, "packet: %u\n", -+ pfe->hif.napi_counters[NAPI_PACKET_COUNT]); -+ len += sprintf(buf + len, "budget: %u\n", -+ pfe->hif.napi_counters[NAPI_FULL_BUDGET_COUNT]); -+ len += sprintf(buf + len, "desc: %u\n", -+ pfe->hif.napi_counters[NAPI_DESC_COUNT]); -+ len += sprintf(buf + len, "full: %u\n", -+ pfe->hif.napi_counters[NAPI_CLIENT_FULL_COUNT]); -+ -+ return len; -+} -+ -+static ssize_t pfe_set_hif_napi_stats(struct device *dev, -+ struct device_attribute *attr, -+ const char *buf, size_t count) -+{ -+ struct platform_device *pdev = to_platform_device(dev); -+ struct pfe *pfe = platform_get_drvdata(pdev); -+ -+ memset(pfe->hif.napi_counters, 0, sizeof(pfe->hif.napi_counters)); -+ -+ return count; -+} -+ -+static DEVICE_ATTR(hif_napi_stats, 0644, pfe_show_hif_napi_stats, -+ pfe_set_hif_napi_stats); -+#endif -+ -+static DEVICE_ATTR(class, 0644, pfe_show_class, pfe_set_class); -+static DEVICE_ATTR(tmu, 0644, pfe_show_tmu, pfe_set_tmu); -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+static DEVICE_ATTR(util, 0644, pfe_show_util, pfe_set_util); -+#endif -+static DEVICE_ATTR(bmu, 0444, pfe_show_bmu, NULL); -+static DEVICE_ATTR(hif, 0444, pfe_show_hif, NULL); -+static DEVICE_ATTR(gpi, 0444, pfe_show_gpi, NULL); -+static DEVICE_ATTR(drops, 0644, pfe_show_drops, pfe_set_drops); -+static DEVICE_ATTR(tmu0_queues, 0444, pfe_show_tmu0_queues, NULL); -+static DEVICE_ATTR(tmu1_queues, 0444, pfe_show_tmu1_queues, NULL); -+static DEVICE_ATTR(tmu2_queues, 0444, pfe_show_tmu2_queues, NULL); -+static DEVICE_ATTR(tmu3_queues, 0444, pfe_show_tmu3_queues, NULL); -+static DEVICE_ATTR(pfemem, 0444, pfe_show_pfemem, NULL); -+static DEVICE_ATTR(fcs_revalidated, 0444, pfe_show_crc_revalidated, NULL); -+ -+int pfe_sysfs_init(struct pfe *pfe) -+{ -+ if (device_create_file(pfe->dev, &dev_attr_class)) -+ goto err_class; -+ -+ if (device_create_file(pfe->dev, &dev_attr_tmu)) -+ goto err_tmu; -+ -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ if (device_create_file(pfe->dev, &dev_attr_util)) -+ goto err_util; -+#endif -+ -+ if (device_create_file(pfe->dev, &dev_attr_bmu)) -+ goto err_bmu; -+ -+ if (device_create_file(pfe->dev, &dev_attr_hif)) -+ goto err_hif; -+ -+ if (device_create_file(pfe->dev, &dev_attr_gpi)) -+ goto err_gpi; -+ -+ if (device_create_file(pfe->dev, &dev_attr_drops)) -+ goto err_drops; -+ -+ if (device_create_file(pfe->dev, &dev_attr_tmu0_queues)) -+ goto err_tmu0_queues; -+ -+ if (device_create_file(pfe->dev, &dev_attr_tmu1_queues)) -+ goto err_tmu1_queues; -+ -+ if (device_create_file(pfe->dev, &dev_attr_tmu2_queues)) -+ goto err_tmu2_queues; -+ -+ if (device_create_file(pfe->dev, &dev_attr_tmu3_queues)) -+ goto err_tmu3_queues; -+ -+ if (device_create_file(pfe->dev, &dev_attr_pfemem)) -+ goto err_pfemem; -+ -+ if (device_create_file(pfe->dev, &dev_attr_fcs_revalidated)) -+ goto err_crc_revalidated; -+ -+#ifdef HIF_NAPI_STATS -+ if (device_create_file(pfe->dev, &dev_attr_hif_napi_stats)) -+ goto err_hif_napi_stats; -+#endif -+ -+ return 0; -+ -+#ifdef HIF_NAPI_STATS -+err_hif_napi_stats: -+ device_remove_file(pfe->dev, &dev_attr_fcs_revalidated); -+#endif -+ -+err_crc_revalidated: -+ device_remove_file(pfe->dev, &dev_attr_pfemem); -+ -+err_pfemem: -+ device_remove_file(pfe->dev, &dev_attr_tmu3_queues); -+ -+err_tmu3_queues: -+ device_remove_file(pfe->dev, &dev_attr_tmu2_queues); -+ -+err_tmu2_queues: -+ device_remove_file(pfe->dev, &dev_attr_tmu1_queues); -+ -+err_tmu1_queues: -+ device_remove_file(pfe->dev, &dev_attr_tmu0_queues); -+ -+err_tmu0_queues: -+ device_remove_file(pfe->dev, &dev_attr_drops); -+ -+err_drops: -+ device_remove_file(pfe->dev, &dev_attr_gpi); -+ -+err_gpi: -+ device_remove_file(pfe->dev, &dev_attr_hif); -+ -+err_hif: -+ device_remove_file(pfe->dev, &dev_attr_bmu); -+ -+err_bmu: -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ device_remove_file(pfe->dev, &dev_attr_util); -+ -+err_util: -+#endif -+ device_remove_file(pfe->dev, &dev_attr_tmu); -+ -+err_tmu: -+ device_remove_file(pfe->dev, &dev_attr_class); -+ -+err_class: -+ return -1; -+} -+ -+void pfe_sysfs_exit(struct pfe *pfe) -+{ -+#ifdef HIF_NAPI_STATS -+ device_remove_file(pfe->dev, &dev_attr_hif_napi_stats); -+#endif -+ device_remove_file(pfe->dev, &dev_attr_fcs_revalidated); -+ device_remove_file(pfe->dev, &dev_attr_pfemem); -+ device_remove_file(pfe->dev, &dev_attr_tmu3_queues); -+ device_remove_file(pfe->dev, &dev_attr_tmu2_queues); -+ device_remove_file(pfe->dev, &dev_attr_tmu1_queues); -+ device_remove_file(pfe->dev, &dev_attr_tmu0_queues); -+ device_remove_file(pfe->dev, &dev_attr_drops); -+ device_remove_file(pfe->dev, &dev_attr_gpi); -+ device_remove_file(pfe->dev, &dev_attr_hif); -+ device_remove_file(pfe->dev, &dev_attr_bmu); -+#if !defined(CONFIG_FSL_PPFE_UTIL_DISABLED) -+ device_remove_file(pfe->dev, &dev_attr_util); -+#endif -+ device_remove_file(pfe->dev, &dev_attr_tmu); -+ device_remove_file(pfe->dev, &dev_attr_class); -+} ---- /dev/null -+++ b/drivers/staging/fsl_ppfe/pfe_sysfs.h -@@ -0,0 +1,17 @@ -+/* SPDX-License-Identifier: GPL-2.0+ */ -+/* -+ * Copyright 2015-2016 Freescale Semiconductor, Inc. -+ * Copyright 2017 NXP -+ */ -+ -+#ifndef _PFE_SYSFS_H_ -+#define _PFE_SYSFS_H_ -+ -+#include <linux/proc_fs.h> -+ -+u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset); -+ -+int pfe_sysfs_init(struct pfe *pfe); -+void pfe_sysfs_exit(struct pfe *pfe); -+ -+#endif /* _PFE_SYSFS_H_ */ |