aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/layerscape/patches-4.4/3001-arm64-ls1043a-add-DTS-for-Freescale-LS1043A-SoC.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/layerscape/patches-4.4/3001-arm64-ls1043a-add-DTS-for-Freescale-LS1043A-SoC.patch')
-rw-r--r--target/linux/layerscape/patches-4.4/3001-arm64-ls1043a-add-DTS-for-Freescale-LS1043A-SoC.patch552
1 files changed, 0 insertions, 552 deletions
diff --git a/target/linux/layerscape/patches-4.4/3001-arm64-ls1043a-add-DTS-for-Freescale-LS1043A-SoC.patch b/target/linux/layerscape/patches-4.4/3001-arm64-ls1043a-add-DTS-for-Freescale-LS1043A-SoC.patch
deleted file mode 100644
index 39a33282a9..0000000000
--- a/target/linux/layerscape/patches-4.4/3001-arm64-ls1043a-add-DTS-for-Freescale-LS1043A-SoC.patch
+++ /dev/null
@@ -1,552 +0,0 @@
-From 3ce895cbe3469bfcaa84674ec4f1b2d60e8b370b Mon Sep 17 00:00:00 2001
-From: Mingkai Hu <Mingkai.Hu@freescale.com>
-Date: Mon, 21 Jul 2014 14:48:42 +0800
-Subject: [PATCH 01/70] arm64/ls1043a: add DTS for Freescale LS1043A SoC
-
-LS1043a is an SoC with 4 ARMv8 A53 cores and most other IP blocks
-similar to LS1021a which complies to Chassis 2.1 spec.
-
-Following levels of DTSI/DTS files have been created for the
-LS1043A SoC family:
-
-- fsl-ls1043a.dtsi:
- DTS-Include file for FSL LS1043A SoC.
-
-Signed-off-by: Li Yang <leoli@freescale.com>
-Signed-off-by: Hou Zhiqiang <B48286@freescale.com>
-Signed-off-by: Mingkai Hu <Mingkai.Hu@freescale.com>
-Signed-off-by: Wenbin Song <Wenbin.Song@freescale.com>
-Signed-off-by: Mingkai Hu <mingkai.hu@nxp.com>
----
- arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 525 ++++++++++++++++++++++++
- 1 file changed, 525 insertions(+)
- create mode 100644 arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-
---- /dev/null
-+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
-@@ -0,0 +1,525 @@
-+/*
-+ * Device Tree Include file for Freescale Layerscape-1043A family SoC.
-+ *
-+ * Copyright 2014-2015, Freescale Semiconductor
-+ *
-+ * Mingkai Hu <Mingkai.hu@freescale.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPLv2 or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This library is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This library is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/ {
-+ compatible = "fsl,ls1043a";
-+ interrupt-parent = <&gic>;
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+
-+ cpus {
-+ #address-cells = <2>;
-+ #size-cells = <0>;
-+
-+ /*
-+ * We expect the enable-method for cpu's to be "psci", but this
-+ * is dependent on the SoC FW, which will fill this in.
-+ *
-+ * Currently supported enable-method is psci v0.2
-+ */
-+ cpu0: cpu@0 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a53";
-+ reg = <0x0 0x0>;
-+ clocks = <&clockgen 1 0>;
-+ };
-+
-+ cpu1: cpu@1 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a53";
-+ reg = <0x0 0x1>;
-+ clocks = <&clockgen 1 0>;
-+ };
-+
-+ cpu2: cpu@2 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a53";
-+ reg = <0x0 0x2>;
-+ clocks = <&clockgen 1 0>;
-+ };
-+
-+ cpu3: cpu@3 {
-+ device_type = "cpu";
-+ compatible = "arm,cortex-a53";
-+ reg = <0x0 0x3>;
-+ clocks = <&clockgen 1 0>;
-+ };
-+ };
-+
-+ memory@80000000 {
-+ device_type = "memory";
-+ reg = <0x0 0x80000000 0 0x80000000>;
-+ /* DRAM space 1, size: 2GiB DRAM */
-+ };
-+
-+ sysclk: sysclk {
-+ compatible = "fixed-clock";
-+ #clock-cells = <0>;
-+ clock-frequency = <100000000>;
-+ clock-output-names = "sysclk";
-+ };
-+
-+ timer {
-+ compatible = "arm,armv8-timer";
-+ interrupts = <1 13 0x1>, /* Physical Secure PPI */
-+ <1 14 0x1>, /* Physical Non-Secure PPI */
-+ <1 11 0x1>, /* Virtual PPI */
-+ <1 10 0x1>; /* Hypervisor PPI */
-+ };
-+
-+ pmu {
-+ compatible = "arm,armv8-pmuv3";
-+ interrupts = <0 106 0x4>,
-+ <0 107 0x4>,
-+ <0 95 0x4>,
-+ <0 97 0x4>;
-+ interrupt-affinity = <&cpu0>,
-+ <&cpu1>,
-+ <&cpu2>,
-+ <&cpu3>;
-+ };
-+
-+ gic: interrupt-controller@1400000 {
-+ compatible = "arm,gic-400";
-+ #interrupt-cells = <3>;
-+ interrupt-controller;
-+ reg = <0x0 0x1401000 0 0x1000>, /* GICD */
-+ <0x0 0x1402000 0 0x2000>, /* GICC */
-+ <0x0 0x1404000 0 0x2000>, /* GICH */
-+ <0x0 0x1406000 0 0x2000>; /* GICV */
-+ interrupts = <1 9 0xf08>;
-+ };
-+
-+ soc {
-+ compatible = "simple-bus";
-+ #address-cells = <2>;
-+ #size-cells = <2>;
-+ ranges;
-+
-+ clockgen: clocking@1ee1000 {
-+ compatible = "fsl,ls1043a-clockgen";
-+ reg = <0x0 0x1ee1000 0x0 0x1000>;
-+ #clock-cells = <2>;
-+ clocks = <&sysclk>;
-+ };
-+
-+ scfg: scfg@1570000 {
-+ compatible = "fsl,ls1043a-scfg", "syscon";
-+ reg = <0x0 0x1570000 0x0 0x10000>;
-+ big-endian;
-+ };
-+
-+ dcfg: dcfg@1ee0000 {
-+ compatible = "fsl,ls1043a-dcfg", "syscon";
-+ reg = <0x0 0x1ee0000 0x0 0x10000>;
-+ };
-+
-+ ifc: ifc@1530000 {
-+ compatible = "fsl,ifc", "simple-bus";
-+ reg = <0x0 0x1530000 0x0 0x10000>;
-+ interrupts = <0 43 0x4>;
-+ };
-+
-+ esdhc: esdhc@1560000 {
-+ compatible = "fsl,ls1043a-esdhc", "fsl,esdhc";
-+ reg = <0x0 0x1560000 0x0 0x10000>;
-+ interrupts = <0 62 0x4>;
-+ clock-frequency = <0>;
-+ voltage-ranges = <1800 1800 3300 3300>;
-+ sdhci,auto-cmd12;
-+ big-endian;
-+ bus-width = <4>;
-+ };
-+
-+ dspi0: dspi@2100000 {
-+ compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x0 0x2100000 0x0 0x10000>;
-+ interrupts = <0 64 0x4>;
-+ clock-names = "dspi";
-+ clocks = <&clockgen 4 0>;
-+ spi-num-chipselects = <5>;
-+ big-endian;
-+ status = "disabled";
-+ };
-+
-+ dspi1: dspi@2110000 {
-+ compatible = "fsl,ls1043a-dspi", "fsl,ls1021a-v1.0-dspi";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x0 0x2110000 0x0 0x10000>;
-+ interrupts = <0 65 0x4>;
-+ clock-names = "dspi";
-+ clocks = <&clockgen 4 0>;
-+ spi-num-chipselects = <5>;
-+ big-endian;
-+ status = "disabled";
-+ };
-+
-+ i2c0: i2c@2180000 {
-+ compatible = "fsl,vf610-i2c";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x0 0x2180000 0x0 0x10000>;
-+ interrupts = <0 56 0x4>;
-+ clock-names = "i2c";
-+ clocks = <&clockgen 4 0>;
-+ dmas = <&edma0 1 39>,
-+ <&edma0 1 38>;
-+ dma-names = "tx", "rx";
-+ status = "disabled";
-+ };
-+
-+ i2c1: i2c@2190000 {
-+ compatible = "fsl,vf610-i2c";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x0 0x2190000 0x0 0x10000>;
-+ interrupts = <0 57 0x4>;
-+ clock-names = "i2c";
-+ clocks = <&clockgen 4 0>;
-+ status = "disabled";
-+ };
-+
-+ i2c2: i2c@21a0000 {
-+ compatible = "fsl,vf610-i2c";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x0 0x21a0000 0x0 0x10000>;
-+ interrupts = <0 58 0x4>;
-+ clock-names = "i2c";
-+ clocks = <&clockgen 4 0>;
-+ status = "disabled";
-+ };
-+
-+ i2c3: i2c@21b0000 {
-+ compatible = "fsl,vf610-i2c";
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+ reg = <0x0 0x21b0000 0x0 0x10000>;
-+ interrupts = <0 59 0x4>;
-+ clock-names = "i2c";
-+ clocks = <&clockgen 4 0>;
-+ status = "disabled";
-+ };
-+
-+ duart0: serial@21c0500 {
-+ compatible = "fsl,ns16550", "ns16550a";
-+ reg = <0x00 0x21c0500 0x0 0x100>;
-+ interrupts = <0 54 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ };
-+
-+ duart1: serial@21c0600 {
-+ compatible = "fsl,ns16550", "ns16550a";
-+ reg = <0x00 0x21c0600 0x0 0x100>;
-+ interrupts = <0 54 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ };
-+
-+ duart2: serial@21d0500 {
-+ compatible = "fsl,ns16550", "ns16550a";
-+ reg = <0x0 0x21d0500 0x0 0x100>;
-+ interrupts = <0 55 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ };
-+
-+ duart3: serial@21d0600 {
-+ compatible = "fsl,ns16550", "ns16550a";
-+ reg = <0x0 0x21d0600 0x0 0x100>;
-+ interrupts = <0 55 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ };
-+
-+ gpio1: gpio@2300000 {
-+ compatible = "fsl,ls1043a-gpio";
-+ reg = <0x0 0x2300000 0x0 0x10000>;
-+ interrupts = <0 66 0x4>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ gpio2: gpio@2310000 {
-+ compatible = "fsl,ls1043a-gpio";
-+ reg = <0x0 0x2310000 0x0 0x10000>;
-+ interrupts = <0 67 0x4>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ gpio3: gpio@2320000 {
-+ compatible = "fsl,ls1043a-gpio";
-+ reg = <0x0 0x2320000 0x0 0x10000>;
-+ interrupts = <0 68 0x4>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ gpio4: gpio@2330000 {
-+ compatible = "fsl,ls1043a-gpio";
-+ reg = <0x0 0x2330000 0x0 0x10000>;
-+ interrupts = <0 134 0x4>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ interrupt-controller;
-+ #interrupt-cells = <2>;
-+ };
-+
-+ lpuart0: serial@2950000 {
-+ compatible = "fsl,ls1021a-lpuart";
-+ reg = <0x0 0x2950000 0x0 0x1000>;
-+ interrupts = <0 48 0x4>;
-+ clocks = <&clockgen 0 0>;
-+ clock-names = "ipg";
-+ status = "disabled";
-+ };
-+
-+ lpuart1: serial@2960000 {
-+ compatible = "fsl,ls1021a-lpuart";
-+ reg = <0x0 0x2960000 0x0 0x1000>;
-+ interrupts = <0 49 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ clock-names = "ipg";
-+ status = "disabled";
-+ };
-+
-+ lpuart2: serial@2970000 {
-+ compatible = "fsl,ls1021a-lpuart";
-+ reg = <0x0 0x2970000 0x0 0x1000>;
-+ interrupts = <0 50 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ clock-names = "ipg";
-+ status = "disabled";
-+ };
-+
-+ lpuart3: serial@2980000 {
-+ compatible = "fsl,ls1021a-lpuart";
-+ reg = <0x0 0x2980000 0x0 0x1000>;
-+ interrupts = <0 51 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ clock-names = "ipg";
-+ status = "disabled";
-+ };
-+
-+ lpuart4: serial@2990000 {
-+ compatible = "fsl,ls1021a-lpuart";
-+ reg = <0x0 0x2990000 0x0 0x1000>;
-+ interrupts = <0 52 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ clock-names = "ipg";
-+ status = "disabled";
-+ };
-+
-+ lpuart5: serial@29a0000 {
-+ compatible = "fsl,ls1021a-lpuart";
-+ reg = <0x0 0x29a0000 0x0 0x1000>;
-+ interrupts = <0 53 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ clock-names = "ipg";
-+ status = "disabled";
-+ };
-+
-+ wdog0: wdog@2ad0000 {
-+ compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
-+ reg = <0x0 0x2ad0000 0x0 0x10000>;
-+ interrupts = <0 83 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ clock-names = "wdog";
-+ big-endian;
-+ };
-+
-+ edma0: edma@2c00000 {
-+ #dma-cells = <2>;
-+ compatible = "fsl,vf610-edma";
-+ reg = <0x0 0x2c00000 0x0 0x10000>,
-+ <0x0 0x2c10000 0x0 0x10000>,
-+ <0x0 0x2c20000 0x0 0x10000>;
-+ interrupts = <0 103 0x4>,
-+ <0 103 0x4>;
-+ interrupt-names = "edma-tx", "edma-err";
-+ dma-channels = <32>;
-+ big-endian;
-+ clock-names = "dmamux0", "dmamux1";
-+ clocks = <&clockgen 4 0>,
-+ <&clockgen 4 0>;
-+ };
-+
-+ usb0: usb3@2f00000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x0 0x2f00000 0x0 0x10000>;
-+ interrupts = <0 60 0x4>;
-+ dr_mode = "host";
-+ };
-+
-+ usb1: usb3@3000000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x0 0x3000000 0x0 0x10000>;
-+ interrupts = <0 61 0x4>;
-+ dr_mode = "host";
-+ };
-+
-+ usb2: usb3@3100000 {
-+ compatible = "snps,dwc3";
-+ reg = <0x0 0x3100000 0x0 0x10000>;
-+ interrupts = <0 63 0x4>;
-+ dr_mode = "host";
-+ };
-+
-+ sata: sata@3200000 {
-+ compatible = "fsl,ls1043a-ahci";
-+ reg = <0x0 0x3200000 0x0 0x10000>;
-+ interrupts = <0 69 0x4>;
-+ clocks = <&clockgen 4 0>;
-+ };
-+
-+ msi1: msi-controller1@1571000 {
-+ compatible = "fsl,1s1043a-msi";
-+ reg = <0x0 0x1571000 0x0 0x4>,
-+ <0x0 0x1571004 0x0 0x4>;
-+ reg-names = "msiir", "msir";
-+ msi-controller;
-+ interrupts = <0 116 0x4>;
-+ };
-+
-+ msi2: msi-controller2@1572000 {
-+ compatible = "fsl,1s1043a-msi";
-+ reg = <0x0 0x1572000 0x0 0x4>,
-+ <0x0 0x1572004 0x0 0x4>;
-+ reg-names = "msiir", "msir";
-+ msi-controller;
-+ interrupts = <0 126 0x4>;
-+ };
-+
-+ msi3: msi-controller3@1573000 {
-+ compatible = "fsl,1s1043a-msi";
-+ reg = <0x0 0x1573000 0x0 0x4>,
-+ <0x0 0x1573004 0x0 0x4>;
-+ reg-names = "msiir", "msir";
-+ msi-controller;
-+ interrupts = <0 160 0x4>;
-+ };
-+
-+ pcie@3400000 {
-+ compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
-+ reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
-+ 0x40 0x00000000 0x0 0x00002000>; /* configuration space */
-+ reg-names = "regs", "config";
-+ interrupts = <0 118 0x4>, /* controller interrupt */
-+ <0 117 0x4>; /* PME interrupt */
-+ interrupt-names = "intr", "pme";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ num-lanes = <4>;
-+ bus-range = <0x0 0xff>;
-+ ranges = <0x81000000 0x0 0x00000000 0x40 0x00010000 0x0 0x00010000 /* downstream I/O */
-+ 0x82000000 0x0 0x40000000 0x40 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+ msi-parent = <&msi1>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 7>;
-+ interrupt-map = <0000 0 0 1 &gic 0 110 0x4>,
-+ <0000 0 0 2 &gic 0 111 0x4>,
-+ <0000 0 0 3 &gic 0 112 0x4>,
-+ <0000 0 0 4 &gic 0 113 0x4>;
-+ };
-+
-+ pcie@3500000 {
-+ compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
-+ reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */
-+ 0x48 0x00000000 0x0 0x00002000>; /* configuration space */
-+ reg-names = "regs", "config";
-+ interrupts = <0 128 0x4>,
-+ <0 127 0x4>;
-+ interrupt-names = "intr", "pme";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ num-lanes = <2>;
-+ bus-range = <0x0 0xff>;
-+ ranges = <0x81000000 0x0 0x00000000 0x48 0x00010000 0x0 0x00010000 /* downstream I/O */
-+ 0x82000000 0x0 0x40000000 0x48 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+ msi-parent = <&msi2>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 7>;
-+ interrupt-map = <0000 0 0 1 &gic 0 120 0x4>,
-+ <0000 0 0 2 &gic 0 121 0x4>,
-+ <0000 0 0 3 &gic 0 122 0x4>,
-+ <0000 0 0 4 &gic 0 123 0x4>;
-+ };
-+
-+ pcie@3600000 {
-+ compatible = "fsl,ls1043a-pcie", "snps,dw-pcie";
-+ reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */
-+ 0x50 0x00000000 0x0 0x00002000>; /* configuration space */
-+ reg-names = "regs", "config";
-+ interrupts = <0 162 0x4>,
-+ <0 161 0x4>;
-+ interrupt-names = "intr", "pme";
-+ #address-cells = <3>;
-+ #size-cells = <2>;
-+ device_type = "pci";
-+ num-lanes = <2>;
-+ bus-range = <0x0 0xff>;
-+ ranges = <0x81000000 0x0 0x00000000 0x50 0x00010000 0x0 0x00010000 /* downstream I/O */
-+ 0x82000000 0x0 0x40000000 0x50 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
-+ msi-parent = <&msi3>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0 0 0 7>;
-+ interrupt-map = <0000 0 0 1 &gic 0 154 0x4>,
-+ <0000 0 0 2 &gic 0 155 0x4>,
-+ <0000 0 0 3 &gic 0 156 0x4>,
-+ <0000 0 0 4 &gic 0 157 0x4>;
-+ };
-+ };
-+
-+};
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-03 15:10:57 +0000