diff options
Diffstat (limited to 'target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch')
| -rw-r--r-- | target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch b/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch new file mode 100644 index 0000000000..7ab88b5e99 --- /dev/null +++ b/target/linux/layerscape/patches-4.14/201-config-support-layerscape.patch @@ -0,0 +1,301 @@ +From 0bafdb711c1a61fbe5bb5b4d4bb5e32425d95a72 Mon Sep 17 00:00:00 2001 +From: Biwen Li <biwen.li@nxp.com> +Date: Fri, 16 Nov 2018 15:36:03 +0800 +Subject: [PATCH] config: support layerscape +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +This is an integrated patch of config for layerscape + +Signed-off-by: Alison Wang <alison.wang@nxp.com> +Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com> +Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com> +Signed-off-by: Calvin Johnson <calvin.johnson@nxp.com> +Signed-off-by: Camelia Groza <camelia.groza@nxp.com> +Signed-off-by: Chenhui Zhao <chenhui.zhao@nxp.com> +Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> +Signed-off-by: Horia Geantă <horia.geanta@nxp.com> +Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> +Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com> +Signed-off-by: Li Yang <leoyang.li@nxp.com> +Signed-off-by: Madalin Bucur <madalin.bucur@nxp.com> +Signed-off-by: Pankit Garg <pankit.garg@nxp.com> +Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> +Signed-off-by: Ran Wang <ran.wang_1@nxp.com> +Signed-off-by: Razvan Stefanescu <razvan.stefanescu@nxp.com> +Signed-off-by: Shengzhou Liu <Shengzhou.Liu@nxp.com> +Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> +Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com> +Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com> +Signed-off-by: Biwen Li <biwen.li@nxp.com> +--- + drivers/irqchip/Makefile | 1 + + drivers/net/ethernet/freescale/Kconfig | 14 ++++---- + drivers/net/ethernet/freescale/Makefile | 3 ++ + drivers/ptp/Kconfig | 29 +++++++++++++++++ + drivers/soc/Kconfig | 1 + + drivers/soc/fsl/Kconfig | 11 +++++++ + drivers/soc/fsl/Kconfig.arm | 16 +++++++++ + drivers/soc/fsl/Makefile | 3 ++ + drivers/soc/fsl/layerscape/Kconfig | 10 ++++++ + drivers/soc/fsl/layerscape/Makefile | 1 + + drivers/staging/Kconfig | 4 +++ + drivers/staging/Makefile | 2 ++ + drivers/staging/fsl-dpaa2/Kconfig | 43 ++++++++++++++++++++++++- + drivers/staging/fsl-dpaa2/Makefile | 4 +++ + 14 files changed, 135 insertions(+), 7 deletions(-) + create mode 100644 drivers/soc/fsl/Kconfig.arm + create mode 100644 drivers/soc/fsl/layerscape/Kconfig + create mode 100644 drivers/soc/fsl/layerscape/Makefile + +--- a/drivers/irqchip/Makefile ++++ b/drivers/irqchip/Makefile +@@ -80,3 +80,4 @@ obj-$(CONFIG_ARCH_ASPEED) += irq-aspeed + obj-$(CONFIG_STM32_EXTI) += irq-stm32-exti.o + obj-$(CONFIG_QCOM_IRQ_COMBINER) += qcom-irq-combiner.o + obj-$(CONFIG_IRQ_UNIPHIER_AIDET) += irq-uniphier-aidet.o ++obj-$(CONFIG_QUICC_ENGINE) += irq-qeic.o +--- a/drivers/net/ethernet/freescale/Kconfig ++++ b/drivers/net/ethernet/freescale/Kconfig +@@ -5,10 +5,11 @@ + config NET_VENDOR_FREESCALE + bool "Freescale devices" + default y +- depends on FSL_SOC || QUICC_ENGINE || CPM1 || CPM2 || PPC_MPC512x || \ +- M523x || M527x || M5272 || M528x || M520x || M532x || \ +- ARCH_MXC || ARCH_MXS || (PPC_MPC52xx && PPC_BESTCOMM) || \ +- ARCH_LAYERSCAPE || COMPILE_TEST ++ depends on FSL_SOC || (QUICC_ENGINE && PPC32) || CPM1 || CPM2 || \ ++ PPC_MPC512x || M523x || M527x || M5272 || M528x || M520x || \ ++ M532x || ARCH_MXC || ARCH_MXS || \ ++ (PPC_MPC52xx && PPC_BESTCOMM) || ARCH_LAYERSCAPE || \ ++ COMPILE_TEST + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y. + +@@ -73,7 +74,7 @@ config FSL_XGMAC_MDIO + + config UCC_GETH + tristate "Freescale QE Gigabit Ethernet" +- depends on QUICC_ENGINE ++ depends on QUICC_ENGINE && FSL_SOC && PPC32 + select FSL_PQ_MDIO + select PHYLIB + ---help--- +@@ -94,7 +95,8 @@ config GIANFAR + This driver supports the Gigabit TSEC on the MPC83xx, MPC85xx, + and MPC86xx family of chips, the eTSEC on LS1021A and the FEC + on the 8540. +- ++source "drivers/net/ethernet/freescale/sdk_fman/Kconfig" ++source "drivers/net/ethernet/freescale/sdk_dpaa/Kconfig" + source "drivers/net/ethernet/freescale/dpaa/Kconfig" + + endif # NET_VENDOR_FREESCALE +--- a/drivers/net/ethernet/freescale/Makefile ++++ b/drivers/net/ethernet/freescale/Makefile +@@ -20,5 +20,8 @@ gianfar_driver-objs := gianfar.o \ + obj-$(CONFIG_UCC_GETH) += ucc_geth_driver.o + ucc_geth_driver-objs := ucc_geth.o ucc_geth_ethtool.o + ++obj-$(if $(CONFIG_FSL_SDK_FMAN),y) += sdk_fman/ ++obj-$(if $(CONFIG_FSL_SDK_DPAA_ETH),y) += sdk_dpaa/ ++ + obj-$(CONFIG_FSL_FMAN) += fman/ + obj-$(CONFIG_FSL_DPAA_ETH) += dpaa/ +--- a/drivers/ptp/Kconfig ++++ b/drivers/ptp/Kconfig +@@ -55,6 +55,35 @@ config PTP_1588_CLOCK_GIANFAR + To compile this driver as a module, choose M here: the module + will be called gianfar_ptp. + ++config PTP_1588_CLOCK_DPAA ++ tristate "Freescale DPAA as PTP clock" ++ depends on FSL_SDK_DPAA_ETH ++ select PTP_1588_CLOCK ++ select FSL_DPAA_TS ++ default n ++ help ++ This driver adds support for using the DPAA 1588 timer module ++ as a PTP clock. This clock is only useful if your PTP programs are ++ getting hardware time stamps on the PTP Ethernet packets ++ using the SO_TIMESTAMPING API. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called dpaa_ptp. ++ ++config PTP_1588_CLOCK_DPAA2 ++ tristate "Freescale DPAA2 as PTP clock" ++ depends on FSL_DPAA2_ETH ++ select PTP_1588_CLOCK ++ default y ++ help ++ This driver adds support for using the DPAA2 1588 timer module ++ as a PTP clock. This clock is only useful if your PTP programs are ++ getting hardware time stamps on the PTP Ethernet packets ++ using the SO_TIMESTAMPING API. ++ ++ To compile this driver as a module, choose M here: the module ++ will be called dpaa2-rtc. ++ + config PTP_1588_CLOCK_IXP46X + tristate "Intel IXP46x as PTP clock" + depends on IXP4XX_ETH +--- a/drivers/soc/Kconfig ++++ b/drivers/soc/Kconfig +@@ -5,6 +5,7 @@ source "drivers/soc/amlogic/Kconfig" + source "drivers/soc/atmel/Kconfig" + source "drivers/soc/bcm/Kconfig" + source "drivers/soc/fsl/Kconfig" ++source "drivers/soc/fsl/ls2-console/Kconfig" + source "drivers/soc/imx/Kconfig" + source "drivers/soc/mediatek/Kconfig" + source "drivers/soc/qcom/Kconfig" +--- a/drivers/soc/fsl/Kconfig ++++ b/drivers/soc/fsl/Kconfig +@@ -16,3 +16,14 @@ config FSL_GUTS + Initially only reading SVR and registering soc device are supported. + Other guts accesses, such as reading RCW, should eventually be moved + into this driver as well. ++ ++config FSL_SLEEP_FSM ++ bool ++ help ++ This driver configures a hardware FSM (Finite State Machine) for deep sleep. ++ The FSM is used to finish clean-ups at the last stage of system entering deep ++ sleep, and also wakes up system when a wake up event happens. ++ ++if ARM || ARM64 ++source "drivers/soc/fsl/Kconfig.arm" ++endif +--- /dev/null ++++ b/drivers/soc/fsl/Kconfig.arm +@@ -0,0 +1,16 @@ ++# ++# Freescale ARM SOC Drivers ++# ++ ++config LS_SOC_DRIVERS ++ bool "Layerscape Soc Drivers" ++ depends on ARCH_LAYERSCAPE || SOC_LS1021A ++ default n ++ help ++ Say y here to enable Freescale Layerscape Soc Device Drivers support. ++ The Soc Drivers provides the device driver that is a specific block ++ or feature on Layerscape platform. ++ ++if LS_SOC_DRIVERS ++ source "drivers/soc/fsl/layerscape/Kconfig" ++endif +--- a/drivers/soc/fsl/Makefile ++++ b/drivers/soc/fsl/Makefile +@@ -6,3 +6,6 @@ obj-$(CONFIG_FSL_DPAA) + + obj-$(CONFIG_QUICC_ENGINE) += qe/ + obj-$(CONFIG_CPM) += qe/ + obj-$(CONFIG_FSL_GUTS) += guts.o ++obj-$(CONFIG_FSL_LS2_CONSOLE) += ls2-console/ ++obj-$(CONFIG_LS_SOC_DRIVERS) += layerscape/ ++obj-$(CONFIG_FSL_SLEEP_FSM) += sleep_fsm.o +--- /dev/null ++++ b/drivers/soc/fsl/layerscape/Kconfig +@@ -0,0 +1,10 @@ ++# ++# Layerscape Soc drivers ++# ++config FTM_ALARM ++ bool "FTM alarm driver" ++ default n ++ help ++ Say y here to enable FTM alarm support. The FTM alarm provides ++ alarm functions for wakeup system from deep sleep. There is only ++ one FTM can be used in ALARM(FTM 0). +--- /dev/null ++++ b/drivers/soc/fsl/layerscape/Makefile +@@ -0,0 +1 @@ ++obj-$(CONFIG_FTM_ALARM) += ftm_alarm.o +--- a/drivers/staging/Kconfig ++++ b/drivers/staging/Kconfig +@@ -118,4 +118,8 @@ source "drivers/staging/vboxvideo/Kconfi + + source "drivers/staging/pi433/Kconfig" + ++source "drivers/staging/fsl_qbman/Kconfig" ++ ++source "drivers/staging/fsl_ppfe/Kconfig" ++ + endif # STAGING +--- a/drivers/staging/Makefile ++++ b/drivers/staging/Makefile +@@ -50,3 +50,5 @@ obj-$(CONFIG_BCM2835_VCHIQ) += vc04_serv + obj-$(CONFIG_CRYPTO_DEV_CCREE) += ccree/ + obj-$(CONFIG_DRM_VBOXVIDEO) += vboxvideo/ + obj-$(CONFIG_PI433) += pi433/ ++obj-$(CONFIG_FSL_SDK_DPA) += fsl_qbman/ ++obj-$(CONFIG_FSL_PPFE) += fsl_ppfe/ +--- a/drivers/staging/fsl-dpaa2/Kconfig ++++ b/drivers/staging/fsl-dpaa2/Kconfig +@@ -4,7 +4,7 @@ + + config FSL_DPAA2 + bool "Freescale DPAA2 devices" +- depends on FSL_MC_BUS && ARCH_LAYERSCAPE ++ depends on FSL_MC_BUS + ---help--- + Build drivers for Freescale DataPath Acceleration + Architecture (DPAA2) family of SoCs. +@@ -16,3 +16,44 @@ config FSL_DPAA2_ETH + ---help--- + Ethernet driver for Freescale DPAA2 SoCs, using the + Freescale MC bus driver ++ ++if FSL_DPAA2_ETH ++config FSL_DPAA2_ETH_USE_ERR_QUEUE ++ bool "Enable Rx error queue" ++ default n ++ ---help--- ++ Allow Rx error frames to be enqueued on an error queue ++ and processed by the driver (by default they are dropped ++ in hardware). ++ This may impact performance, recommended for debugging ++ purposes only. ++ ++# QBMAN_DEBUG requires some additional DPIO APIs ++config FSL_DPAA2_ETH_DEBUGFS ++ depends on DEBUG_FS ++ bool "Enable debugfs support" ++ default y ++ ---help--- ++ Enable advanced statistics through debugfs interface. ++ ++config FSL_DPAA2_ETH_DCB ++ bool "Data Center Bridging (DCB) Support" ++ default n ++ depends on DCB ++ ---help--- ++ Say Y here if you want to use Data Center Bridging (DCB) features ++ (PFC) in the driver. ++ ++ If unsure, say N. ++endif ++ ++source "drivers/staging/fsl-dpaa2/mac/Kconfig" ++source "drivers/staging/fsl-dpaa2/evb/Kconfig" ++ ++config FSL_DPAA2_ETHSW ++ tristate "Freescale DPAA2 Ethernet Switch" ++ depends on FSL_DPAA2 ++ depends on NET_SWITCHDEV ++ ---help--- ++ Driver for Freescale DPAA2 Ethernet Switch. Select ++ BRIDGE to have support for bridge tools. +--- a/drivers/staging/fsl-dpaa2/Makefile ++++ b/drivers/staging/fsl-dpaa2/Makefile +@@ -3,3 +3,7 @@ + # + + obj-$(CONFIG_FSL_DPAA2_ETH) += ethernet/ ++obj-$(CONFIG_FSL_DPAA2_MAC) += mac/ ++obj-$(CONFIG_FSL_DPAA2_EVB) += evb/ ++obj-$(CONFIG_PTP_1588_CLOCK_DPAA2) += rtc/ ++obj-$(CONFIG_FSL_DPAA2_ETHSW) += ethsw/ |