diff options
Diffstat (limited to 'target/linux/lantiq')
114 files changed, 28761 insertions, 0 deletions
diff --git a/target/linux/lantiq/ase/config-4.14 b/target/linux/lantiq/ase/config-4.14 new file mode 100644 index 0000000000..b802509022 --- /dev/null +++ b/target/linux/lantiq/ase/config-4.14 @@ -0,0 +1,25 @@ +CONFIG_ADM6996_PHY=y +CONFIG_CPU_MIPS32_R1=y +# CONFIG_CPU_MIPS32_R2 is not set +CONFIG_CPU_MIPSR1=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_GPIO_GENERIC=y +CONFIG_GPIO_GENERIC_PLATFORM=y +# CONFIG_ISDN is not set +# CONFIG_LBDAF is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_MIPS_FPU_EMULATOR=y +CONFIG_NLS=y +# CONFIG_PSB6970_PHY is not set +# CONFIG_RTL8366_SMI is not set +CONFIG_SOC_AMAZON_SE=y +# CONFIG_SOC_XWAY is not set +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/lantiq/config-4.14 b/target/linux/lantiq/config-4.14 new file mode 100644 index 0000000000..a98509e5d6 --- /dev/null +++ b/target/linux/lantiq/config-4.14 @@ -0,0 +1,199 @@ +CONFIG_ARCH_BINFMT_ELF_STATE=y +CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_DISCARD_MEMBLOCK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set +CONFIG_ARCH_HAS_RESET_CONTROLLER=y +# CONFIG_ARCH_HAS_SG_CHAIN is not set +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y +CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y +CONFIG_CEVT_R4K=y +CONFIG_CLKDEV_LOOKUP=y +CONFIG_CLONE_BACKWARDS=y +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_CPU_GENERIC_DUMP_TLB=y +CONFIG_CPU_HAS_PREFETCH=y +CONFIG_CPU_HAS_RIXI=y +CONFIG_CPU_HAS_SYNC=y +CONFIG_CPU_MIPS32=y +# CONFIG_CPU_MIPS32_R1 is not set +CONFIG_CPU_MIPS32_R2=y +CONFIG_CPU_MIPSR2=y +CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y +CONFIG_CPU_R4K_CACHE_TLB=y +CONFIG_CPU_R4K_FPU=y +CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y +CONFIG_CPU_SUPPORTS_HIGHMEM=y +CONFIG_CPU_SUPPORTS_MSA=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_WORKQUEUE=y +CONFIG_CSRC_R4K=y +CONFIG_DMA_NONCOHERENT=y +CONFIG_DTC=y +# CONFIG_DT_EASY50712 is not set +CONFIG_EARLY_PRINTK=y +CONFIG_ETHERNET_PACKET_MANGLE=y +CONFIG_FIXED_PHY=y +CONFIG_GENERIC_ATOMIC64=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_IO=y +CONFIG_GENERIC_IRQ_CHIP=y +CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_PCI_IOMAP=y +CONFIG_GENERIC_SCHED_CLOCK=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_MM_LANTIQ=y +CONFIG_GPIO_STP_XWAY=y +CONFIG_GPIO_SYSFS=y +CONFIG_HANDLE_DOMAIN_IRQ=y +CONFIG_HARDWARE_WATCHPOINTS=y +CONFIG_HAS_DMA=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT_MAP=y +# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set +# CONFIG_HAVE_ARCH_BITREVERSE is not set +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_KGDB=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set +CONFIG_HAVE_CBPF_JIT=y +CONFIG_HAVE_CC_STACKPROTECTOR=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_HAVE_DEBUG_KMEMLEAK=y +CONFIG_HAVE_DEBUG_STACKOVERFLOW=y +CONFIG_HAVE_DMA_API_DEBUG=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_HAVE_IDE=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_KVM=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_HAVE_MEMBLOCK=y +CONFIG_HAVE_MEMBLOCK_NODE_MAP=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_HAVE_NET_DSA=y +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_PERF_EVENTS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HW_HAS_PCI=y +CONFIG_HW_RANDOM=y +CONFIG_HZ=250 +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +CONFIG_HZ_PERIODIC=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_IRQCHIP=y +CONFIG_IRQ_DOMAIN=y +CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_MIPS_CPU=y +CONFIG_IRQ_WORK=y +CONFIG_LANTIQ=y +CONFIG_LANTIQ_DT_NONE=y +CONFIG_LANTIQ_ETOP=y +CONFIG_LANTIQ_WDT=y +# CONFIG_LANTIQ_XRX200 is not set +CONFIG_LEDS_GPIO=y +CONFIG_LIBFDT=y +CONFIG_MDIO_BOARDINFO=y +CONFIG_MIPS=y +CONFIG_MIPS_ASID_BITS=8 +CONFIG_MIPS_ASID_SHIFT=0 +CONFIG_MIPS_CLOCK_VSYSCALL=y +# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set +# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set +CONFIG_MIPS_CMDLINE_FROM_DTB=y +# CONFIG_MIPS_ELF_APPENDED_DTB is not set +# CONFIG_MIPS_HUGE_TLB_SUPPORT is not set +CONFIG_MIPS_L1_CACHE_SHIFT=5 +# CONFIG_MIPS_MACHINE is not set +# CONFIG_MIPS_MT_SMP is not set +# CONFIG_MIPS_NO_APPENDED_DTB is not set +CONFIG_MIPS_RAW_APPENDED_DTB=y +CONFIG_MIPS_SPRAM=y +# CONFIG_MIPS_VPE_LOADER is not set +CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_GEOMETRY=y +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_LANTIQ=y +CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y +CONFIG_MTD_SPLIT_BRNIMAGE_FW=y +CONFIG_MTD_SPLIT_EVA_FW=y +CONFIG_MTD_SPLIT_FIRMWARE=y +CONFIG_MTD_SPLIT_TPLINK_FW=y +CONFIG_MTD_SPLIT_UIMAGE_FW=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_NEED_PER_CPU_KM=y +CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y +# CONFIG_NO_IOPORT_MAP is not set +CONFIG_OF=y +CONFIG_OF_ADDRESS=y +CONFIG_OF_EARLY_FLATTREE=y +CONFIG_OF_FLATTREE=y +CONFIG_OF_GPIO=y +CONFIG_OF_IRQ=y +CONFIG_OF_MDIO=y +CONFIG_OF_NET=y +CONFIG_PCI_DRIVERS_LEGACY=y +CONFIG_PERF_USE_VMALLOC=y +CONFIG_PGTABLE_LEVELS=2 +CONFIG_PHYLIB=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_LANTIQ=y +# CONFIG_PINCTRL_SINGLE is not set +CONFIG_PINCTRL_XWAY=y +CONFIG_PSB6970_PHY=y +# CONFIG_RCU_STALL_COMMON is not set +CONFIG_RESET_CONTROLLER=y +CONFIG_RTL8366RB_PHY=y +CONFIG_RTL8366_SMI=y +# CONFIG_SCHED_INFO is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SENSORS_LTQ_CPUTEMP is not set +# CONFIG_SERIAL_8250 is not set +CONFIG_SERIAL_LANTIQ=y +# CONFIG_SOC_AMAZON_SE is not set +# CONFIG_SOC_FALCON is not set +CONFIG_SOC_TYPE_XWAY=y +CONFIG_SOC_XWAY=y +CONFIG_SPI=y +CONFIG_SPI_LANTIQ_SSC=y +CONFIG_SPI_MASTER=y +CONFIG_SRCU=y +CONFIG_SWAP_IO_SPACE=y +CONFIG_SWCONFIG=y +CONFIG_SWPHY=y +CONFIG_SYSCTL_EXCEPTION_TRACE=y +CONFIG_SYS_HAS_CPU_MIPS32_R1=y +CONFIG_SYS_HAS_CPU_MIPS32_R2=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y +CONFIG_SYS_SUPPORTS_ARBIT_HZ=y +CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y +CONFIG_SYS_SUPPORTS_MIPS16=y +CONFIG_SYS_SUPPORTS_MULTITHREADING=y +CONFIG_TICK_CPU_ACCOUNTING=y +CONFIG_USE_OF=y +# CONFIG_XRX200_PHY_FW is not set diff --git a/target/linux/lantiq/falcon/config-4.14 b/target/linux/lantiq/falcon/config-4.14 new file mode 100644 index 0000000000..de4fa3686d --- /dev/null +++ b/target/linux/lantiq/falcon/config-4.14 @@ -0,0 +1,10 @@ +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_SPLIT_FIRMWARE_NAME="linux" +CONFIG_PINCTRL_FALCON=y +# CONFIG_PSB6970_PHY is not set +# CONFIG_RTL8366_SMI is not set +CONFIG_SOC_FALCON=y +# CONFIG_SOC_TYPE_XWAY is not set +# CONFIG_SOC_XWAY is not set +CONFIG_SPI_FALCON=y diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ACMP252.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ACMP252.dts new file mode 100644 index 0000000000..7294720117 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ACMP252.dts @@ -0,0 +1,102 @@ +/dts-v1/; + +#include "danube.dtsi" + +/ { + compatible = "audiocodes,mp-252", "lantiq,xway", "lantiq,danube"; + model = "AudioCodes MediaPack MP-252"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x20000>; + read-only; + }; + + partition@20000 { + label = "uboot_env"; + reg = <0x20000 0x20000>; + }; + + partition@40000 { + label = "boardconfig"; + reg = <0x40000 0x60000>; + read-only; + }; + + partition@a0000 { + label = "firmware"; + reg = <0xa0000 0xf20000>; + }; + + partition@fc0000 { + label = "sysconfig"; + reg = <0xfc0000 0x40000>; + }; + + partition@0x1000000 { + label = "rootfs_data"; + reg = <0x1000000 0x1000000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + }; + + etop@E180000 { + phy-mode = "rmii"; + }; + + pci@E105400 { + status = "okay"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ALL0333CJ.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ALL0333CJ.dts new file mode 100644 index 0000000000..16c5facb35 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ALL0333CJ.dts @@ -0,0 +1,120 @@ +/dts-v1/; + +#include "amazonse.dtsi" + +/ { + compatible = "allnet,all0333cj", "lantiq,xway", "lantiq,ase"; + model = "Allnet ALL0333CJ DSL Modem"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + + led-dsl = &dsl; + led-internet = &online_green; + }; + + }; + + memory@0 { + reg = <0x0 0x1000000>; + }; + + fpi@b0000000 { + etop@E180000 { + phy-mode = "mii"; + }; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + asc { + lantiq,groups = "asc"; + lantiq,function = "asc"; + }; + keys_in { + lantiq,pins = "io0",/* "io25", */"io29"; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; + }; + + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "firmware"; + reg = <0x10000 0x3ef200>; + }; + + partition@3ff200 { + label = "uboot_env"; + reg = <0x3ff200 0xc00>; + read-only; + }; + + partition@3ffe00 { + label = "dummy_bits"; + reg = <0x3ffe00 0x200>; + read-only; + }; + }; + }; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* power led: red=off, green=on */ + power: power { + label = "all0333cj:green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + lan: lan { + label = "all0333cj:green:lan"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + + dsl: dsl { + label = "all0333cj:green:dsl"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + online_green: online { + label = "all0333cj:green:online"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + online_red { + label = "all0333cj:red:online"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4510PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4510PW.dts new file mode 100644 index 0000000000..4720b57dd3 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4510PW.dts @@ -0,0 +1,232 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv4510pw", "lantiq,xway", "lantiq,danube"; + model = "Wippies, Elisa"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power2; + led-running = &power; + + led-dsl = &adsl; + led-internet = &internet; + led-usb = &usb; + led-usb2 = &usb2; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + lantiq,noxip; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xfa0000>; + }; + }; + }; + }; + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu a23"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + exin { + lantiq,groups = "exin1", "exin2"; + lantiq,function = "exin"; + lantiq,output = <0>; + }; + pci_in { + lantiq,groups = "req1", "req2"; + lantiq,function = "pci"; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1", "gnt2"; + lantiq,function = "pci"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + buttons { + lantiq,pins = "io3", "io14"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + }; + }; + + gpios: stp@E100BB0 { + status = "okay"; + lantiq,groups = <0x7>; + }; + + etop@E180000 { + phy-mode = "rmii"; + }; + + pci@E105400 { + status = "okay"; + lantiq,external-clock; + interrupt-map = < + 0x6000 0 0 1 &icu0 135 + 0x7800 0 0 1 &icu0 66 + 0x7800 0 0 2 &icu0 66 + 0x7800 0 0 3 &icu0 66 + >; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0x7>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpios 21 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + power2: power2 { + label = "power2"; + gpios = <&gpios 20 GPIO_ACTIVE_HIGH>; + }; + lan1 { + label = "lan1"; + gpios = <&gpios 19 GPIO_ACTIVE_HIGH>; + }; + lan2 { + label = "lan2"; + gpios = <&gpios 18 GPIO_ACTIVE_HIGH>; + }; + lan3 { + label = "lan3"; + gpios = <&gpios 17 GPIO_ACTIVE_HIGH>; + }; + lan4 { + label = "lan4"; + gpios = <&gpios 16 GPIO_ACTIVE_HIGH>; + }; + wifi: wifi { + label = "wifi"; + gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; + }; + adsl: adsl { + label = "adsl"; + gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; + }; + internet: internet { + label = "internet"; + gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; + }; + internet2 { + label = "internet2"; + gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; + }; + voip { + label = "voip"; + gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; + }; + phone { + label = "phone"; + gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; + }; + phone2 { + label = "phone2"; + gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; + }; + usb: usb { + label = "usb"; + gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; + }; + usb2: usb2 { + label = "usb2"; + gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; + }; + usb3 { + label = "usb3"; + gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; + }; + unlabeled { + label = "unlabeled"; + gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dts new file mode 100644 index 0000000000..34f868f484 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "ARV4518PWR01.dtsi" + +/ { + compatible = "arcadyan,arv4518pwr01", "lantiq,xway", "lantiq,danube"; + model = "SMC7908A-ISP"; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dtsi new file mode 100644 index 0000000000..8e712bfec6 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01.dtsi @@ -0,0 +1,198 @@ +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + + led-dsl = &dsl; + led-internet = &online; + led-usb = &usb; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@400000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x0>; + }; + + ath5k_eep { + compatible = "ath5k,eeprom"; + ath,eep-flash = <&boardconfig 0x400>; + ath,mac-offset = <0x16>; + ath,mac-increment = <1>; + ath,eep-swap; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_in { + lantiq,groups = "req1", "req2"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1", "gnt2"; + lantiq,function = "pci"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + pci@E105400 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0xf>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpio 3 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + dsl: dsl { + label = "dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "online"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "wifi"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wps { + label = "wps"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + dsl2 { + label = "dsl2"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "usb"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + voice { + label = "voice"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "fxs1"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "fxs2"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "fxo"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01A.dts new file mode 100644 index 0000000000..771d0146d8 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4518PWR01A.dts @@ -0,0 +1,14 @@ +/dts-v1/; + +#include "ARV4518PWR01.dtsi" + +/ { + compatible = "arcadyan,arv4518pwr01a", "lantiq,xway", "lantiq,danube"; + model = "SMC7908A-ISP, Airties WAV-221"; + + fpi@10000000 { + pci@E105400 { + lantiq,external-clock; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4519PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4519PW.dts new file mode 100644 index 0000000000..8f781760f9 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4519PW.dts @@ -0,0 +1,195 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv4519pw", "lantiq,xway", "lantiq,danube"; + model = "Vodafone Netfaster IAD 2, Pirelli P.RG A4201G"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &internet_green; + led-usb = &usb; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@3f0000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x400>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + + pci@E105400 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0xf>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_green: power { + label = "arv4519pw:green:power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "arv4519pw:red:power"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv4519pw:green:wlan"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "arv4519pw:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet_green: online { + label = "arv4519pw:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "arv4519pw:red:internet"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "arv4519pw:green:usb"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + voip { + label = "arv4519pw:green:voip"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv4519pw:green:phone1"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv4519pw:green:phone2"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv4519pw:green:line"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv4519pw:green:wps"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv4519pw:orange:wps"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wps3 { + label = "arv4519pw:red:wps"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4520PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4520PW.dts new file mode 100644 index 0000000000..05e0dfe048 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4520PW.dts @@ -0,0 +1,221 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv4520pw", "lantiq,xway", "lantiq,danube"; + model = "Easybox 800, WAV-281"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_blue; + led-failsafe = &power_red; + led-running = &power_blue; + + led-dsl = &dsl; + led-internet = &internet_blue; + led-usb = &usb; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH + &gpiomm 7 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "uboot_env"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "firmware"; + reg = <0x30000 0x3c0000>; + }; + + boardconfig: partition@7f0000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x400>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + }; + + pci@E105400 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + +// gpiomm 10 - switch + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_blue: power { + label = "arv4520pw:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "arv4520pw:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet_blue: internet { + label = "arv4520pw:blue:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power2 { + label = "arv4520pw:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv4520pw:yellow:wps"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv4520pw:red:wps"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + /* + wps green is missing + */ + fxs1 { + label = "arv4520pw:blue:telefon1"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv4520pw:blue:telefon2"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + isdn { + label = "arv4520pw:blue:isdn"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv4520pw:blue:line"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv4520pw:blue:sprache"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "arv4520pw:blue:usb"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv4520pw:blue:wifi"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "arv4520pw:red:internet"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + /* + info is missing + */ + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4525PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4525PW.dts new file mode 100644 index 0000000000..61548c793a --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV4525PW.dts @@ -0,0 +1,169 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv4525pw", "lantiq,xway", "lantiq,danube"; + model = "Speedport W501V Typ A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + /* we dont have a power led, lets use the online led */ + led-boot = &online; + led-failsafe = &online; + + led-dsl = &dsl; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@400000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + ath5k_eep { + compatible = "ath5k,eeprom"; + ath,eep-flash = <&boardconfig 0x400>; + ath,mac-offset = <0x0>; + ath,eep-swap; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + relay { + lantiq,pins = "io31"; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + + pci@E105400 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + +/* +#define ARV4525PW_PHYRESET 13 +#define ARV4525PW_RELAY 31 +*/ + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + fxo { + label = "arv4525pw:green:festnetz"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + fxs { + label = "arv4525pw:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "arv4525pw:green:t-dsl"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv4525pw:green:wlan"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "arv4525pw:green:online"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts new file mode 100644 index 0000000000..d996e8b66f --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV452CQW.dts @@ -0,0 +1,237 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv452cqw", "lantiq,xway", "lantiq,danube"; + model = "Arcor 801"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_blue; + led-failsafe = &power_red; + led-running = &power_blue; + + led-dsl = &dsl_blue; + led-usb = &usb; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH + &gpiomm 7 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x400000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@3f0000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + + ath5k_eep { + compatible = "ath5k,eeprom"; + ath,eep-flash = <&boardconfig 0x400>; + ath,mac-offset = <0x0>; + ath,eep-swap; + }; + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10>; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x77f>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io3", "io5", "io6", "io7", "io9"; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + }; + + etop@E180000 { + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + + pci@E105400 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + +/* +#define ARV452CPW_SWITCH_RESET 110 +*/ + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power_blue: power0 { + label = "arv452cqw:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl_blue: dsl { + label = "arv452cqw:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + isdn { + label = "arv452cqw:blue:isdn"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power1 { + label = "arv452cqw:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv452cqw:blue:wps"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wps1 { + label = "arv452cqw:yellow:wps"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv452cqw:blue:telefon1"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv452cqw:blue:telefon2"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv452cqw:red:wps"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv452cqw:blue:line"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv452cqw:blue:sprache"; + gpios = <&gpiomm 4 1>; + }; + usb: usb { + label = "arv452cqw:blue:usb"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv452cqw:blue:wlan"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + /* + internet blue and internet red are missing + dsl2 and dsl3 are not referenced in manual + */ + dsl2 { + label = "arv452cqw:yellow:dsl"; + gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; + }; + dsl3 { + label = "arv452cqw:red:dsl"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7506PW11.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7506PW11.dts new file mode 100644 index 0000000000..3ec4bf41a0 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7506PW11.dts @@ -0,0 +1,165 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv7506pw11", "lantiq,xway", "lantiq,danube"; + model = "Alice/O2 IAD 4421"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power_red; + led-running = &power; + + led-dsl = &dsl; + led-internet = &internet; + led-wifi = &wlan; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7a0000>; + }; + + boardconfig: partition@7f0000 { + label = "board_config"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + }; + }; + + /* GPIO 19: switch reset */ + etop@E180000 { + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + wlan: wlan { + label = "arv7506pw11:green:wlan"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + power: power { + label = "arv7506pw11:green:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "arv7506pw11:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet: internet { + label = "arv7506pw11:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power_red { + label = "arv7506pw11:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + internet_red { + label = "arv7506pw11:red:internet"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + info { + label = "arv7506pw11:green:info"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + telefon { + label = "arv7506pw11:green:telefon"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + info_red { + label = "arv7506pw11:red:info"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts new file mode 100644 index 0000000000..dc3f614b9d --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7510PW22.dts @@ -0,0 +1,196 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv7510pw22", "lantiq,xway", "lantiq,danube"; + model = "Astoria Networks ARV7510PW22"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + + led-dsl = &internet; + led-usb = &umts; + led-wifi = &wlan; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xf80000>; + }; + + boardconfig: partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_in { + lantiq,groups = "req1", "req2"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + pins_out { + lantiq,pins = "io2", "io4", "io8", "io9", "io10", "io15", "io20"; + lantiq,output = <1>; + }; + pins_in { + lantiq,pins = "io11", "io12", "io28"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + + etop@E180000 { + /* Switch reset 19 */ + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + restart { + label = "restart"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + reset { + label = "reset"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + internet: internet { + label = "internet"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + wlan: wlan { + label = "wlan"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + umts: 3g { + label = "3g"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + message { + label = "message"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + lantiq,external-clock; + interrupt-map = < + 0x7000 0 0 1 &icu0 30 + 0x7800 0 0 1 &icu0 135 + 0x7800 0 0 2 &icu0 135 + 0x7800 0 0 3 &icu0 135 + >; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0x3>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts new file mode 100644 index 0000000000..41b1249323 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7518PW.dts @@ -0,0 +1,232 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv7518pw", "lantiq,xway", "lantiq,danube"; + model = "Astoria Networks ARV7518PW"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &online_green; + led-usb = &usb; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7d0000>; + }; + + boardconfig: partition@400000 { + label = "boardconfig"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x0>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io2", "io4", "io5", "io6", "io7", "io8", "io19"; + lantiq,output = <1>; + }; + keys { + lantiq,pins = "io28", "io30"; + lantiq,output = <0>; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + }; + +/* +#define SWITCH_RESET 13 +*/ + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power_green: power { + label = "arv7518pw:green:power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + dsl: dsl { + label = "arv7518pw:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + online_green: online { + label = "arv7518pw:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv7518pw:green:wlan"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + power_red: power2 { + label = "arv7518pw:red:power"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "arv7518pw:red:internet"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "arv7518pw:green:usb"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv7518pw:green:voip"; + gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv7518pw:green:phone1"; + gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv7518pw:green:phone2"; + gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>; + }; + unlabeled { + label = "arv7518pw:amber:unlabeled"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wps { + label = "arv7518pw:amber:wps"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "arv7518pw:green:wps"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + wps3 { + label = "arv7518pw:red:wps"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + lantiq,external-clock; + req-mask = <0xf>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519PW.dts new file mode 100644 index 0000000000..9983a7906f --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519PW.dts @@ -0,0 +1,229 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv7519pw", "lantiq,xway", "lantiq,danube"; + model = "Astoria Networks ARV7519PW"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power2; + led-running = &power; + + led-dsl = &dsl; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xf80000>; + }; + + boardconfig: partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + switch_rst { + lantiq,pins = "io19"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + + /* warning: passive port + only works with active devices */ + ifxhcd@E101000 { + status = "okay"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + reset { + label = "reset"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power: power { + label = "power"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power2: power2 { + label = "power2"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "online"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "online2"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "wifi"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + wifi2 { + label = "wifi2"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + wifi3 { + label = "wifi3"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + voice { + label = "voice"; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; + }; + wps { + label = "wps"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + wps2 { + label = "wps2"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + }; + wps3 { + label = "wps3"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + lan { + label = "lan"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + tv { + label = "tv"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + upgrade { + label = "upgrade"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + }; + + /* is there another way to "reserve" the GPIO? */ + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pci0 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0xf>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519RW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519RW22.dts new file mode 100644 index 0000000000..0bdc150a1e --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7519RW22.dts @@ -0,0 +1,231 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv7519rw22", "lantiq,xway", "lantiq,vr9"; + model = "Orange Livebox 2.1"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_green; + led-running = &power_green; + + led-dsl = &internet_green; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x60000>; + read-only; + }; + + partition@60000 { + label = "uboot-env"; + reg = <0x60000 0x20000>; + read-only; + }; + + partition@80000 { + label = "firmware"; + reg = <0x80000 0x1f00000>; + }; + + boardconfig: partition@1f80000 { + label = "boardconfig"; + reg = <0x1f80000 0x80000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + pcie-rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + }; + + ifxhcd@E106000 { + status = "okay"; + gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + }; + + pcie@d900000 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + wps { + label = "wps"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + lan_green { + label = "arv7519rw22:green:lan"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + internet_red { + label = "arv7519rw22:red:internet"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + power_green: power_green { + label = "arv7519rw22:green:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + alarm_blue { + label = "arv7519rw22:blue:alarm"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + internet_orange { + label = "arv7519rw22:orange:internet"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + internet_green: internet_green { + label = "arv7519rw22:green:internet"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + }; + voice_green { + label = "arv7519rw22:green:voice"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&boardconfig 0x16>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7525PW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7525PW.dts new file mode 100644 index 0000000000..0007535895 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV7525PW.dts @@ -0,0 +1,155 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube"; + model = "Speedport W303V Typ A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &power_green; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + boardconfig: partition@400000 { + label = "board_config"; + reg = <0x3f0000 0x10000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power_green: power { + label = "arv7525pw:green:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power1 { + label = "arv7525pw:red:power"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "arv7525pw:green:online"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + voice { + label = "arv7525pw:green:telefonie"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + voice2 { + label = "arv7525pw:red:telefonie"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv7525pw:green:wlan"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + interrupt-map = <0x7000 0 0 1 &icu0 135 1>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts new file mode 100644 index 0000000000..3591b43671 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW.dts @@ -0,0 +1,238 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv752dpw", "lantiq,xway", "lantiq,danube"; + model = "Arcor 802"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_red; + led-failsafe = &power_blue; + led-running = &power_red; + + led-dsl = &internet_red; + led-usb = &umts; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7d0000>; + }; + + boardconfig: partition@7f0000 { + label = "board_config"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x3>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_in { + lantiq,groups = "req2", "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io3", "io5", "io6", "io8"; + lantiq,output = <1>; + lantiq,pull = <0>; + }; + keys { + lantiq,pins = "io11", "io12", "io13", "io28"; + lantiq,output = <0>; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>; + }; + + etop@E180000 { + phy-mode = "rmii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + restart { + label = "restart"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + dsl { + label = "dsl"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power_blue: power1 { + label = "arv752dpw:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + internet_red: internet { + label = "arv752dpw:red:internet"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + message { + label = "arv752dpw:red:message"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power { + label = "arv752dpw:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + voice1 { + label = "arv752dpw:red:voice"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + umts: umts { + label = "arv752dpw:red:umts"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv752dpw:red:wifi"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv752dpw:green:tae-n"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv752dpw:green:tae-u"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv752dpw:green:isdn"; + gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "arv752dpw:blue:internet"; + gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; + }; + voice2 { + label = "arv752dpw:blue:voice"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + lantiq,external-clock; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + interrupt-map = <0x7000 0 0 1 &icu0 135>; + req-mask = <0x3>; + + wifi@1814,0601 { + compatible = "pci1814,0601"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW22.dts new file mode 100644 index 0000000000..8b5be8b76c --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV752DPW22.dts @@ -0,0 +1,259 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv752dpw22", "lantiq,xway", "lantiq,danube"; + model = "Arcor 803"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_red; + led-failsafe = &power_blue; + led-running = &power_red; + + led-dsl = &internet_red; + led-usb = &umts; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x30000>; + read-only; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x30000 0x10000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x40000 0x7b0000>; + }; + + boardconfig: partition@7f0000 { + label = "board_config"; + reg = <0x7f0000 0x10000>; + read-only; + }; + }; + }; + + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <3>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ebu { + lantiq,groups = "ebu cs1"; + lantiq,function = "ebu"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,open-drain = <1>; + lantiq,output = <1>; + }; + leds { + lantiq,pins = "io3", "io5", "io6", "io8"; + lantiq,open-drain = <1>; + lantiq,output = <1>; + }; + buttons { + lantiq,pins = "io11", "io12", "io13", "io28"; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpiomm 0 GPIO_ACTIVE_HIGH>; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&boardconfig 0x16>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + restart { + label = "restart"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + dsl { + label = "dsl"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + reset { + label = "reset"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power_blue: power1 { + label = "arv752dpw22:blue:power"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + internet_red: internet { + label = "arv752dpw22:red:internet"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + message { + label = "arv752dpw22:red:message"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + power_red: power { + label = "arv752dpw22:red:power"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + voice1 { + label = "arv752dpw22:red:voice"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + umts: umts { + label = "arv752dpw22:red:umts"; + gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "arv752dpw22:red:wifi"; + gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>; + }; + fxs1 { + label = "arv752dpw22:green:tae-n"; + gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>; + }; + fxs2 { + label = "arv752dpw22:green:tae-u"; + gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>; + }; + fxo { + label = "arv752dpw22:green:isdn"; + gpios = <&gpiomm 7 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "arv752dpw22:blue:internet"; + gpios = <&gpiomm 8 GPIO_ACTIVE_LOW>; + }; + voice2 { + label = "arv752dpw22:blue:voice"; + gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>; + }; + eth1 { + label = "arv752dpw22:green:lan1"; + gpios = <&gpiomm 11 GPIO_ACTIVE_LOW>; + }; + eth2 { + label = "arv752dpw22:green:lan2"; + gpios = <&gpiomm 12 GPIO_ACTIVE_LOW>; + }; + eth3 { + label = "arv752dpw22:green:lan3"; + gpios = <&gpiomm 13 GPIO_ACTIVE_LOW>; + }; + eth4 { + label = "arv752dpw22:green:lan4"; + gpios = <&gpiomm 14 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + lantiq,external-clock; + interrupt-map = < + 0x7000 0 0 1 &icu0 30 + 0x7800 0 0 1 &icu0 135 + 0x7800 0 0 2 &icu0 135 + 0x7800 0 0 3 &icu0 135 + >; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + req-mask = <0x3>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts new file mode 100644 index 0000000000..4edcde9763 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ARV8539PW22.dts @@ -0,0 +1,180 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,arv8539pw22", "lantiq,xway", "lantiq,danube"; + model = "Speedport W 504V Typ A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl_green; + led-internet = &online_green; + led-wifi = &wireless_green; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x30000>; /* 192 KiB */ + read-only; + }; + + partition@30000 { + label = "uboot"; + reg = <0x30000 0x10000>; /* 64 KiB */ + read-only; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x7B0000>; /* 7872 KiB */ + }; + + art: partition@7F0000 { + label = "art"; + reg = <0x7F0000 0x10000>; /* 64 KiB*/ + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + lantiq,output = <0>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + relay { + lantiq,pins = "io31"; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&art 0x16>; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wlan { + label = "wlan"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + /* key DECT is missing */ + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_green: power-green { + label = "arv8539pw22:green:power"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power-red { + label = "arv8539pw22:red:power"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + + dsl_green: dsl-green { + label = "arv8539pw22:green:dsl"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + + online_green: online-green { + label = "arv8539pw22:green:online"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + wireless_green: wireless-green { + label = "arv8539pw22:green:wlan"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + /* + telefonie green is missing + */ + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + mtd-mac-address = <&art 0x16>; + mtd-mac-address-increment = <1>; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts new file mode 100644 index 0000000000..2037f40f03 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ASL56026.dts @@ -0,0 +1,171 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "alphanetworks,asl56026", "lantiq,xway", "lantiq,vr9"; + model = "BT OpenReach VDSL Modem"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x0800000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + }; + + partition@30000 { + label = "uboot_env"; + reg = <0x30000 0x10000>; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x750000>; + }; + + partition@790000 { + label = "ddrconfig"; + reg = <0x790000 0x70000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + }; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + dsl: dsl { + label = "asl56026:green:dsl"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + /* power-* is a bicolour led */ + power_green: power_green { + label = "asl56026:green:power"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + + power_red: power_red { + label = "asl56026:red:power"; + gpios = <&gpio 18 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + power_led_blink { + gpio-export,name = "power_led_blink"; + gpio-export,output = <0>; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV2B.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV2B.dts new file mode 100644 index 0000000000..961fd9b929 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV2B.dts @@ -0,0 +1,262 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "bt,homehub-v2b", "lantiq,xway", "lantiq,danube"; + model = "BT Home Hub 2B"; /* SoC: Lantiq Danube-S PSB 50712 @ 333MHz V1.3/1.5 */ + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_orange; + led-failsafe = &power_red; + led-running = &power_blue; + + led-dsl = &broadband_blue; + led-wifi = &wireless_blue; + }; + + memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { /* NOR Flash: Spansion S29AL004D 512KB */ + compatible = "lantiq,nor"; /* "AMD AM29LV400BB" compatible on 3.3.8 */ + lantiq,cs = <0>; + bank-width = <2>; + reg = <0 0x0 0x80000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; /* 256KB */ + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x10000>; /* 64KB */ + }; + + partition@50000 { + label = "rg_conf_1"; + reg = <0x50000 0x10000>; + }; + + partition@60000 { + label = "rg_conf_2"; + reg = <0x60000 0x10000>; + }; + + partition@70000 { + label = "rg_conf_factory"; + reg = <0x70000 0x10000>; + }; + }; + }; + + nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <1 0x0 0x2000000 >; + #address-cells = <1>; + #size-cells = <1>; + req-mask = <0x1>; /* PCI request lines to mask during NAND access */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ath9k_cal: partition@0 { + label = "art"; /* Atheros 9160 wifi b/g/n radio EEPROM */ + reg = <0x00000 0x4000>; + read-only; + }; + + partition@4000 { + label = "kernel"; + reg = <0x4000 0x200000>; + }; + + partition@164000 { + label = "ubi"; + reg = <0x204000 0x1DFC000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + nand_out { + lantiq,groups = "nand cle", "nand ale"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + nand_cs1 { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + }; + + btn_in { + lantiq,pins = "io2", "io15", "io22"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + }; + }; + + etop@E180000 { + phy-mode = "rmii"; + }; + + ifxhcd@E101000 { + status = "okay"; + }; + + gpios: stp@E100BB0 { + status = "okay"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + findhandset { + label = "findhandset"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PHONE>; + }; + wps { + label = "wps"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + upgrading-orange { + label = "bthomehubv2b:orange:upgrading"; + gpios = <&gpios 5 GPIO_ACTIVE_HIGH>; + }; + + phone-orange { + label = "bthomehubv2b:orange:phone"; + gpios = <&gpios 6 GPIO_ACTIVE_HIGH>; + }; + phone-blue { + label = "bthomehubv2b:blue:phone"; + gpios = <&gpios 7 GPIO_ACTIVE_HIGH>; + }; + + wireless-orange { + label = "bthomehubv2b:orange:wireless"; + gpios = <&gpios 8 GPIO_ACTIVE_HIGH>; + }; + wireless_blue: wireless-blue { + label = "bthomehubv2b:blue:wireless"; + gpios = <&gpios 9 GPIO_ACTIVE_HIGH>; + }; + + broadband-red { + label = "bthomehubv2b:red:broadband"; + gpios = <&gpios 10 GPIO_ACTIVE_HIGH>; + }; + broadband-orange { + label = "bthomehubv2b:orange:broadband"; + gpios = <&gpios 11 GPIO_ACTIVE_HIGH>; + }; + broadband_blue: broadband-blue { + label = "bthomehubv2b:blue:broadband"; + gpios = <&gpios 12 GPIO_ACTIVE_HIGH>; + }; + + power_red: power-red { + label = "bthomehubv2b:red:power"; + gpios = <&gpios 13 GPIO_ACTIVE_HIGH>; + }; + power_orange: power-orange { + label = "bthomehubv2b:orange:power"; + gpios = <&gpios 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + power_blue: power-blue { + label = "bthomehubv2b:blue:power"; + gpios = <&gpios 15 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0027 { + compatible = "pci168c,0027"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts new file mode 100644 index 0000000000..d37b9728d2 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV3A.dts @@ -0,0 +1,208 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "bt,homehub-v3a", "lantiq,xway", "lantiq,ar9"; + model = "BT Home Hub 3A"; /* SoC: Lantiq ar9 @ 333MHz */ + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_orange; + led-failsafe = &power_red; + led-running = &power_blue; + + led-dsl = &broadband_blue; + led-wifi = &wireless_blue; + }; + + memory@0 { /* RAM: Samsung K4H511638F-LC 64MB */ + reg = <0x0 0x4000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 31 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nand-parts@0 { /* NAND Flash: Samsung K9F5608U0D-JIB0 32MB */ + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <1 0x0 0x2000000 >; + #address-cells = <1>; + #size-cells = <1>; + req-mask = <0x1>; /* PCI request lines to mask during NAND access */ + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "preboot"; + reg = <0x00000 0x8000>; + read-only; + }; + partition@8000 { + label = "u-boot"; + reg = <0x8000 0x05c000>; + read-only; + }; + partition@64000 { + label = "uboot_env"; + reg = <0x64000 0x004000>; + }; + ath9k_cal: partition@68000 { + label = "art-copy"; + reg = <0x68000 0x004000>; + }; + partition@6c000 { + label = "kernel"; + reg = <0x6c000 0x200000>; + }; + partition@26c000 { + label = "ubi"; + reg = <0x26c000 0x1d94000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + nand_out { + lantiq,groups = "nand cle", "nand ale"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + nand_cs1 { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci_out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + }; + }; + }; + + etop@E180000 { + phy-mode = "rgmii"; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + restart { + label = "restart"; + gpios = <&gpio 52 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + wps { + label = "wps"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wireless-red { + label = "bthomehubv3a:red:wireless"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + wireless-orange { + label = "bthomehubv3a:orange:wireless"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + wireless_blue: wireless-blue { + label = "bthomehubv3a:blue:wireless"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + + broadband-red { + label = "bthomehubv3a:red:broadband"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + broadband-orange { + label = "bthomehubv3a:orange:broadband"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + broadband_blue: broadband-blue { + label = "bthomehubv3a:blue:broadband"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + power_red: power-red { + label = "bthomehubv3a:red:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + power_orange: power-orange { + label = "bthomehubv3a:orange:power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_blue: power-blue { + label = "bthomehubv3a:blue:power"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + ath9k@7000 { + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts new file mode 100644 index 0000000000..2f75074696 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/BTHOMEHUBV5A.dts @@ -0,0 +1,282 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "bt,homehub-v5a", "lantiq,xway", "lantiq,vr9"; + model = "BT Home Hub 5A"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_blue; + + led-dsl = &broadband_blue; + led-wifi = &wireless_blue; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + localbus@0 { + nand-parts@0 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0x1 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + nand-on-flash-bbt; + nand-ecc-strength = <3>; + nand-ecc-step-size = <256>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0xa0000>; + read-only; + }; + partition@a0000 { + label = "uboot-env"; + reg = <0xa0000 0x20000>; + read-only; + }; + partition@c0000 { + label = "unused"; + reg = <0xc0000 0x40000>; + }; + partition@100000 { + label = "ubi"; + reg = <0x100000 0x7e80000>; + }; + /* + * last 512 KiB are for the bad block table, not writable + */ + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain; + }; + pcie_rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + lantiq,open-drain; + }; + usb_vbus { + lantiq,pins = "io33"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + nand_out { + lantiq,groups = "nand cle", "nand ale"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + nand_cs1 { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + restart { + label = "restart"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + /* broadband-* is a single RGB led */ + broadband-red { + label = "bthomehubv5a:red:broadband"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + }; + broadband-green { + label = "bthomehubv5a:green:broadband"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + }; + broadband_blue: broadband-blue { + label = "bthomehubv5a:blue:broadband"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + }; + + /* wireless-* is a single RGB led */ + wireless-red { + label = "bthomehubv5a:red:wireless"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + }; + wireless-green { + label = "bthomehubv5a:green:wireless"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + wireless_blue: wireless-blue { + label = "bthomehubv5a:blue:wireless"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + /* power-* is a single RGB led */ + power_red: power-red { + label = "bthomehubv5a:red:power"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + power_green: power-green { + label = "bthomehubv5a:green:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_blue: power-blue { + label = "bthomehubv5a:blue:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + dimmed { + label = "dimmed"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,002d { + compatible = "pci168c,002d"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + qca,disable-5ghz; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN1000B.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN1000B.dts new file mode 100644 index 0000000000..e5637efca5 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN1000B.dts @@ -0,0 +1,171 @@ +/dts-v1/; + +#include "amazonse.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "netgear,dgn1000b", "lantiq,xway", "lantiq,ase"; + model = "Netgear DGN1000B"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + + led-dsl = &dsl; + led-internet = &online_green; + }; + + memory@0 { + reg = <0x0 0x1000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + asc { + lantiq,groups = "asc"; + lantiq,function = "asc"; + }; + keys_in { + lantiq,pins = "io0",/* "io25", */"io29"; + lantiq,pull = <2>; + lantiq,open-drain = <1>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs1"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + spi@E100800 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + m25p80@1 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <1 0>; + spi-max-frequency = <5000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + wps { + label = "wps"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + dsl: dsl { + label = "dgn1000b:green:dsl"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + online_green: online { + label = "dgn1000b:green:online"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + online2 { + label = "dgn1000b:red:online"; + gpios = <&gpio 3 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + wps { + label = "dgn1000b:green:wps"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + power: power { + label = "dgn1000b:green:power"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + /* + power red is missing + */ + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dts new file mode 100644 index 0000000000..98a2ebd98e --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "DGN3500.dtsi" + +/ { + compatible = "netgear,dgn3500", "lantiq,xway", "lantiq,ar9"; + model = "Netgear DGN3500"; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dtsi new file mode 100644 index 0000000000..d58d717537 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500.dtsi @@ -0,0 +1,213 @@ +#include "ar9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + chosen { + bootargs = "root= console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &internet; + led-usb = &usb; + led-wifi = &wifi_green; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + pci-in { + lantiq,groups = "req1"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci-out { + lantiq,groups = "gnt1"; + lantiq,output = <1>; + lantiq,pull = <0>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + }; + + ifxhcd@E101000 { + status = "okay"; + }; + }; + + rtl8366rb { + compatible = "realtek,rtl8366rb"; + gpio-sda = <&gpio 35 GPIO_ACTIVE_HIGH>; + gpio-sck = <&gpio 37 GPIO_ACTIVE_HIGH>; + + realtek,initvals = < + 0x0000 0x0830 + 0x0400 0x8130 + 0x000A 0x83ED + 0x0F51 0x0017 + 0x02F5 0x0048 + 0x02FA 0xFFDF + 0x02FB 0xFFE0 + 0x0450 0x0000 + 0x0401 0x0000 + 0x0431 0x0960 + >; + }; + + + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + wps { + label = "wps"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + internet: internet { + label = "dgn3500:green:internet"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + internet2 { + label = "dgn3500:red:internet"; + gpios = <&gpio 30 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "dgn3500:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "dgn3500:green:usb"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + power_green: power { + label = "dgn3500:green:power"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "dgn3500:red:power"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + wifi_green: wifi { + label = "dgn3500:green:wireless"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + wifi2 { + label = "dgn3500:amber:wireless"; + gpios = <&gpio 51 GPIO_ACTIVE_LOW>; + }; + wps { + label = "dgn3500:green:wps"; + gpios = <&gpio 52 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@168c,0029 { + compatible = "pci168c,0029"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <20000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x10000>; + label = "uboot"; + read-only; + }; + + partition@10000 { + reg = <0x10000 0x10000>; + label = "uboot-env"; + read-only; + }; + + ath9k_cal: partition@20000 { + reg = <0x20000 0x10000>; + label = "calibration"; + read-only; + }; + + partition@50000 { + reg = <0x50000 0xfa0000>; + label = "firmware"; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500B.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500B.dts new file mode 100644 index 0000000000..d1d788cc7d --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DGN3500B.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "DGN3500.dtsi" + +/ { + compatible = "netgear,dgn3500b", "lantiq,xway", "lantiq,ar9"; + model = "Netgear DGN3500B"; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DM200.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DM200.dts new file mode 100644 index 0000000000..3c8a2a1fa9 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/DM200.dts @@ -0,0 +1,215 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "netgear,dm200", "lantiq,xway", "lantiq,vr9"; + model = "Netgear DM200"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_amber; + led-running = &power_green; + + led-dsl = &dsl_green; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + }; + + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + pcie@d900000 { + status = "disabled"; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/xrx200_phy22f_a22.bin"; + phys = [ 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + annexa { + gpio-export,name = "annexa"; + gpio-export,output = <0>; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + annexb { + gpio-export,name = "annexb"; + gpio-export,output = <0>; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_amber: power_amber { + label = "dm200:amber:power"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + }; + power_green: power_green { + label = "dm200:green:power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + lan_amber { + label = "dm200:amber:lan"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + lan_green { + label = "dm200:green:lan"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + dsl_amber { + label = "dm200:amber:dsl"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + dsl_green: dsl_green { + label = "dm200:green:dsl"; + gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <10000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "uboot"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "gphyfirmware"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x7b0000>; + label = "firmware"; + }; + + partition@7e0000 { + reg = <0x7e0000 0x10000>; + label = "sysconfig"; + read-only; + }; + + partition@7f0000 { + reg = <0x7f0000 0x2000>; + label = "ubootconfig"; + read-only; + }; + + partition@7f2000 { + reg = <0x7f2000 0x1000>; + label = "ART"; + read-only; + }; + + partition@7f3000 { + reg = <0x7f3000 0x1000>; + label = "pot"; + read-only; + }; + + partition@7f4000 { + reg = <0x7f4000 0xc000>; + label = "ret"; + read-only; + }; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50712.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50712.dts new file mode 100644 index 0000000000..ebd30a7c06 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50712.dts @@ -0,0 +1,83 @@ +/dts-v1/; + +#include "danube.dtsi" + +/ { + compatible = "lantiq,easy50712", "lantiq,xway", "lantiq,danube"; + model = "Intel EASY50712 Nand"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + phy-mode = "rmii"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50810.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50810.dts new file mode 100644 index 0000000000..605eb826a2 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY50810.dts @@ -0,0 +1,93 @@ +/dts-v1/; + +#include "ar9.dtsi" + +/ { + compatible = "lantiq,easy50810", "lantiq,xway", "lantiq,ar9"; + model = "Lantiq EASY50810"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + phy-mode = "rmii"; + }; + + stp0: stp@E100BB0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xE100BB0 0x40>; + + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920.dtsi new file mode 100644 index 0000000000..b19b9713f6 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920.dtsi @@ -0,0 +1,298 @@ +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + + led-usb = &usb1; + led-usb2 = &usb2; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin3 { + lantiq,groups = "exin3"; + lantiq,function = "exin"; + }; + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + nand { + lantiq,groups = "nand cle", "nand ale", + "nand rd", "nand rdy"; + lantiq,function = "ebu"; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */ + "io4", "io5", "io6", /* stp */ + "io21", + "io33"; + lantiq,open-drain; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + conf_in { + lantiq,pins = "io39", /* exin3 */ + "io48"; /* nand rdy */ + lantiq,pull = <2>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + stp: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x3>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; + /* lantiq,rising; */ + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy11g_a14.bin"; + firmware2 = "lantiq/xrx200_phy11g_a22.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; +/* reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + };*/ + paging { + label = "paging"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PHONE>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power: power { + label = "easy80920:green:power"; + gpios = <&stp 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + warning { + label = "easy80920:green:warning"; + gpios = <&stp 22 GPIO_ACTIVE_HIGH>; + }; + fxs1 { + label = "easy80920:green:fxs1"; + gpios = <&stp 21 GPIO_ACTIVE_HIGH>; + }; + fxs2 { + label = "easy80920:green:fxs2"; + gpios = <&stp 20 GPIO_ACTIVE_HIGH>; + }; + fxo { + label = "easy80920:green:fxo"; + gpios = <&stp 19 GPIO_ACTIVE_HIGH>; + }; + usb1: usb1 { + label = "easy80920:green:usb1"; + gpios = <&stp 18 GPIO_ACTIVE_HIGH>; + }; + usb2: usb2 { + label = "easy80920:green:usb2"; + gpios = <&stp 15 GPIO_ACTIVE_HIGH>; + }; + sd { + label = "easy80920:green:sd"; + gpios = <&stp 14 GPIO_ACTIVE_HIGH>; + }; + wps { + label = "easy80920:green:wps"; + gpios = <&stp 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <1000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + }; + + wan: interface@1 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + lantiq,wan; + + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NAND.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NAND.dts new file mode 100644 index 0000000000..095bd564da --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NAND.dts @@ -0,0 +1,68 @@ +/dts-v1/; + + +#include "EASY80920.dtsi" + +/ { + compatible = "lantiq,easy80920-nand", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; + model = "Intel EASY80920 Nand"; + + chosen { + bootargs = "ubi.mtd=ubi ubi.block=0,rootfsA root=/dev/ubiblock0_1"; + }; + + fpi@10000000 { + localbus@0 { + ranges = <0 0 0x4000000 0x3ffffff>; + nand-parts@0 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x100000>; /* 1024 KB */ + }; + + partition@100000 { + label = "uboot_env"; + reg = <0x100000 0x40000>; /* 256 KB */ + }; + + partition@140000 { + label = "ubootconfigB"; + reg = <0x140000 0x40000>; /* 256 KB */ + }; + + partition@180000 { + label = "gphyfirmware"; + reg = <0x180000 0x40000>; /* 256 KB */ + }; + + partition@1c0000 { + label = "ubi"; + reg = <0x1c0000 0xc800000>; + }; + + partition@c9c0000 { + label = "calibration"; + reg = <0xc9c0000 0x100000>; + }; + + partition@cac0000 { + label = "res"; + reg = <0xcac0000 0x13540000>; + }; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NOR.dts new file mode 100644 index 0000000000..e273138d8a --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY80920NOR.dts @@ -0,0 +1,43 @@ +/dts-v1/; + + +#include "EASY80920.dtsi" + +/ { + compatible = "lantiq,easy80920-nor", "lantiq,easy80920", "lantiq,xway", "lantiq,vr9"; + model = "Intel EASY80920 Nor"; + + fpi@10000000 { + localbus@0 { + ranges = <0 0 0x0 0x3ffffff>; + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7e0000>; + }; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88388.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88388.dts new file mode 100644 index 0000000000..a9c5b3c24b --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88388.dts @@ -0,0 +1,106 @@ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon FTTDP8 Reference Board"; + compatible = "lantiq,easy88388", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + gpio-keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io34", "io35", "io36", "io37", "io38", + "io39", "io40", "io41"; + lantiq,function = "gpio"; + }; + }; + + easy88388-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy88388:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + TEST { + label = "easy88388:green:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + STATUS { + label = "easy88388:green:status"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + ERROR { + label = "easy88388:red:error"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + DSL1 { + label = "easy88388:dsl:1"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + DSL2 { + label = "easy88388:dsl:2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + DSL3 { + label = "easy88388:dsl:3"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + DSL4 { + label = "easy88388:dsl:4"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + DSL5 { + label = "easy88388:dsl:5"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + DSL6 { + label = "easy88388:dsl:6"; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + DSL7 { + label = "easy88388:dsl:7"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + DSL8 { + label = "easy88388:dsl:8"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + }; +}; + diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88444.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88444.dts new file mode 100644 index 0000000000..ceb81ea13b --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY88444.dts @@ -0,0 +1,80 @@ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon FTTdp G.FAST Reference Board"; + compatible = "lantiq,easy88444", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + gpio-keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io34", "io35", "io37"; + lantiq,function = "gpio"; + }; + }; + + easy88444-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy88444:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + TEST { + label = "easy88444:green:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + STATUS { + label = "easy88444:green:status"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + GFAST1 { + label = "easy88444:gfast:1"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + GFAST2 { + label = "easy88444:gfast:2"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + GFAST3 { + label = "easy88444:gfast:3"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + GFAST4 { + label = "easy88444:gfast:4"; + gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + }; +}; + diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000-base.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000-base.dtsi new file mode 100644 index 0000000000..cfe1140ac1 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000-base.dtsi @@ -0,0 +1,110 @@ + +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "lantiq,easy98000", "lantiq,falcon"; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; + }; + + easy98000-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&bootled_pins>; + + LED_0 { + label = "easy98000:green:gpon"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_1 { + label = "easy98000:red:gpon"; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_2 { + label = "easy98000:green:gpon_tx"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_3 { + label = "easy98000:green:gpon_rx"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_4 { + label = "easy98000:green:voice"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_5 { + label = "easy98000:green:status"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; + +&ebu_cs1 { + eth0: ethernet@0000000 { + compatible = "davicom,dm9000"; + device_type = "network"; + reg = <0x0000003 0x1>, <0x0000001 0x1>; + reg-names = "addr", "data"; + interrupt-parent = <&gpio1>; + #interrupt-cells = <2>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + local-mac-address = [ 00 00 00 00 00 00 ]; + }; + + cpld@3c00000 { + compatible = "lantiq,easy98000_addon"; + reg = <0x3c00000 0x2>; + }; + + cpld@3c0000c { + compatible = "lantiq,easy98000_cpld_led"; + reg = <0x3c0000c 0x2>, <0x3c00012 0x2>; + }; +}; + +/* // enable this for second uart: +&serial1 { + status = "okay"; +};*/ + +&spi { + status = "okay"; + + eeprom@1 { + compatible = "atmel,at25", "atmel,at25160n"; + reg = <2>; + spi-max-frequency = <1000000>; + spi-cpha; + spi-cpol; + + pagesize = <32>; + size = <2048>; + address-width = <16>; + }; +}; + +&i2c { + status = "okay"; + + clock-frequency = <100000>; + + /* eeprom-emulation by OMU */ + eeprom@50 { + compatible = "at,24c02"; + reg = <0x50>; + }; + eeprom@51 { + compatible = "at,24c02"; + reg = <0x51>; + }; +}; + diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NAND.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NAND.dts new file mode 100644 index 0000000000..a40cef3931 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NAND.dts @@ -0,0 +1,40 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "EASY98000-base.dtsi" + +/ { + model = "Lantiq Falcon (NAND)"; + compatible = "lantiq,easy98000-nand", "lantiq,easy98000", "lantiq,falcon"; + + aliases { + spi0 = &spi; + }; +}; + +&ebu_cs0 { + gen_nand@0 { + compatible = "gen_nand", "lantiq,nand-falcon"; + bank-width = <1>; + reg = <0x0 0x40000>; + #address-cells = <1>; + #size-cells = <1>; + linux,mtd-name = "gen_nand"; + bbt-use-flash; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x40000 0x40000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x80000 0x3d0000>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NOR.dts new file mode 100644 index 0000000000..ad53bf96e9 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000NOR.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "EASY98000-base.dtsi" + +/ { + model = "Lantiq Falcon (NOR)"; + compatible = "lantiq,easy98000-nor", "lantiq,easy98000", "lantiq,falcon"; + + aliases { + spi0 = &spi; + }; +}; + +&ebu_cs0 { + cfi@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0x0 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x40000 0x40000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x80000 0x3d0000>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000SFLASH.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000SFLASH.dts new file mode 100644 index 0000000000..bbe524e94e --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98000SFLASH.dts @@ -0,0 +1,16 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "EASY98000-base.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon (SFLASH)"; + compatible = "lantiq,easy98000-sflash", "lantiq,easy98000", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + spi1 = &spi; + }; +}; + diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020.dts new file mode 100644 index 0000000000..c0970ef48c --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020.dts @@ -0,0 +1,95 @@ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon Reference Board"; + compatible = "lantiq,easy98020", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + gpio-keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: phy-led-pins { + lantiq,pins = "io42", "io41", "io38", "io37"; + lantiq,function = "gpio"; + }; + }; + + easy98020-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&bootled_pins>; + + GPON { + label = "easy98020:green:gpon"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + TEST { + label = "easy98020:green:test"; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + ETH { + label = "easy98020:green:status"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VOICE { + label = "easy98020:green:voice"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VIDEO { + label = "easy98020:green:video"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + easy98020-phy-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + + GE0_ACT { + label = "easy98020:ge0_act"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + GE0_LINK { + label = "easy98020:ge0_link"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + GE1_ACT { + label = "easy98020:ge1_act"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + GE1_LINK { + label = "easy98020:ge1_link"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020V18.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020V18.dts new file mode 100644 index 0000000000..9aa1be91ed --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98020V18.dts @@ -0,0 +1,68 @@ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon Reference Board V1.8"; + compatible = "lantiq,easy98020-v18", "lantiq,easy98020", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + gpio-keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io11", "io14", "io36", "io37", "io38"; + lantiq,function = "gpio"; + }; + }; + + easy98020-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy98020:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + TEST { + label = "easy98020:green:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + ETH { + label = "easy98020:green:status"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VOICE { + label = "easy98020:green:voice"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VIDEO { + label = "easy98020:green:video"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98021.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98021.dts new file mode 100644 index 0000000000..7b2e490fcc --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98021.dts @@ -0,0 +1,81 @@ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon HGU Reference Board"; + compatible = "lantiq,easy98021", "lantiq,easy98020", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + gpio-keys { + compatible = "gpio-keys"; + reset { + label = "reset"; + gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + linux,code = <0x198>; + }; + }; + + gpio-mmc { + /* Place-holder for SIM-Card connector, + to list the used GPIOs, no official binding */ + compatible = "gpio-mmc"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>, + <&gpio0 3 GPIO_ACTIVE_HIGH>, + <&gpio0 2 GPIO_ACTIVE_HIGH>, + <0>; /* no CS */ + gpio-names = "di", "do", "clk", "cs"; + reset-gpio = <&gpio3 24 GPIO_ACTIVE_HIGH>; + }; + + pinctrl { + led_pins: led-pins { + lantiq,pins = "io11", "io14", "io36", "io37", "io38"; + lantiq,function = "gpio"; + }; + }; + + easy98021-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins &bootled_pins>; + + GPON { + label = "easy98021:green:gpon"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + TEST { + label = "easy98021:red:test"; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + ETH { + label = "easy98021:green:status"; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + VOICE { + label = "easy98021:green:voice"; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + SIMCARD { + label = "easy98021:green:simcard"; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; + diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE.dts new file mode 100644 index 0000000000..df941cdb67 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE.dts @@ -0,0 +1,76 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon SFP Stick with SyncE"; + compatible = "lantiq,easy98035synce", "lantiq,falcon-sfp", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + + asc0_func1: func1 { + func1_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func1_rx { + lantiq,pins = "io33"; + lantiq,mux = <0>; + }; + }; + asc0_func2: func2 { + func2_tx { + lantiq,pins = "io32"; + lantiq,mux = <0>; + }; + func2_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + asc0_func3: func3 { + func3_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func3_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + }; + + pinselect-asc0 { + compatible = "lantiq,pinselect-asc0"; + pinctrl-names = "asc0", "func1", "func2", "func3"; + pinctrl-0 = <&asc0_pins>; + pinctrl-1 = <&asc0_func1>; + pinctrl-2 = <&asc0_func2>; + pinctrl-3 = <&asc0_func3>; + }; +}; + +&serial0 { + pinctrl-names = "default"; + /* use "empty" pinctrl to leave setting from u-boot enabled */ + pinctrl-0 = < >; +}; + +&i2c { + status = "okay"; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE1588.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE1588.dts new file mode 100644 index 0000000000..a3abc6e707 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/EASY98035SYNCE1588.dts @@ -0,0 +1,76 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon SFP Stick with SyncE/1588"; + compatible = "lantiq,easy98035synce1588", "lantiq,falcon-sfp", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + + asc0_func1: func1 { + func1_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func1_rx { + lantiq,pins = "io33"; + lantiq,mux = <0>; + }; + }; + asc0_func2: func2 { + func2_tx { + lantiq,pins = "io32"; + lantiq,mux = <0>; + }; + func2_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + asc0_func3: func3 { + func3_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + func3_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + }; + + pinselect-asc0 { + compatible = "lantiq,pinselect-asc0"; + pinctrl-names = "asc0", "func1", "func2", "func3"; + pinctrl-0 = <&asc0_pins>; + pinctrl-1 = <&asc0_func1>; + pinctrl-2 = <&asc0_func2>; + pinctrl-3 = <&asc0_func3>; + }; +}; + +&serial0 { + pinctrl-names = "default"; + /* use "empty" pinctrl to leave setting from u-boot enabled */ + pinctrl-0 = < >; +}; + +&i2c { + status = "okay"; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-MDU.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-MDU.dts new file mode 100644 index 0000000000..6710bbe98e --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-MDU.dts @@ -0,0 +1,53 @@ +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> + +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon / Vinax MDU Board"; + compatible = "lantiq,falcon-mdu", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + mdu-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&bootled_pins>; + + LED_0 { + label = "mdu:green:gpon"; + gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_1 { + label = "mdu:green:status"; + gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_2 { + label = "mdu:green:2"; + gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_3 { + label = "mdu:green:3"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + LED_4 { + label = "mdu:green:4"; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; +}; + diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-SFP.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-SFP.dts new file mode 100644 index 0000000000..8d45de4ebe --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FALCON-SFP.dts @@ -0,0 +1,76 @@ +/dts-v1/; + +#include "falcon.dtsi" +#include "falcon-sflash-16M.dtsi" + +/ { + model = "Lantiq Falcon SFP Stick"; + compatible = "lantiq,falcon-sfp", "lantiq,falcon"; + + aliases { + spi0 = &ebu_cs0; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x4000000>; // 64M at 0x0 + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + + asc0_func1: func1 { + func1_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,output = <0>; + }; + func1_rx { + lantiq,pins = "io33"; + lantiq,mux = <0>; + }; + }; + asc0_func2: func2 { + func2_tx { + lantiq,pins = "io32"; + lantiq,mux = <0>; + }; + func2_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + asc0_func3: func3 { + func3_tx { + lantiq,pins = "io32"; + lantiq,mux = <1>; + lantiq,output = <0>; + }; + func3_rx { + lantiq,pins = "io33"; + lantiq,mux = <1>; + lantiq,input = <0>; + }; + }; + }; + + pinselect-asc0 { + compatible = "lantiq,pinselect-asc0"; + pinctrl-names = "asc0", "func1", "func2", "func3"; + pinctrl-0 = <&asc0_pins>; + pinctrl-1 = <&asc0_func1>; + pinctrl-2 = <&asc0_func2>; + pinctrl-3 = <&asc0_func3>; + }; +}; + +&serial0 { + pinctrl-names = "default"; + /* use "empty" pinctrl to leave setting from u-boot enabled */ + pinctrl-0 = < >; +}; + +&i2c { + status = "okay"; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts new file mode 100644 index 0000000000..ef3655de61 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ3370.dts @@ -0,0 +1,288 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "avm,fritz3370", "lantiq,xway", "lantiq,vr9"; + model = "Fritz!Box WLAN 3370"; + + chosen { + bootargs = "console=ttyLTQ0,115200 ubi.mtd=1,512 root=/dev/mtdblock9"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &info_green; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + localbus@0 { + nand-parts@0 { + compatible = "lantiq,nand-xway"; + bank-width = <2>; + reg = <1 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x400000>; + }; + + partition@400000 { + label = "rootfs_ubi"; + reg = <0x400000 0x3000000>; + }; + + partition@3400000 { + label = "vr9_firmware"; + reg = <0x3400000 0x400000>; + }; + partition@3800000 { + label = "reserved"; + reg = <0x3800000 0x3000000>; + }; + partition@6800000 { + label = "config"; + reg = <0x6800000 0x200000>; + }; + partition@6a00000 { + label = "nand-filesystem"; + reg = <0x6a00000 0x1600000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + nand { + lantiq,groups = "nand cle", "nand ale", + "nand rd", "nand cs1", "nand rdy"; + lantiq,function = "ebu"; + lantiq,pull = <1>; + }; + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH + &gpio 14 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/xrx200_phy11g_a14.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + power { + label = "power"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_POWER>; + }; +/* wifi { + label = "wifi"; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + linux,code = <BTN_1>; + };*/ + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_green: power { + label = "fritz3370:green:power"; + gpios = <&gpio 32 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "fritz3370:red:power"; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + }; + info_red { + label = "fritz3370:red:info"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "fritz3370:green:wlan"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "fritz3370:green:dsl"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + lan { + label = "fritz3370:green:lan"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + info_green: info_green { + label = "fritz3370:green:info"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <1000000>; + + urlader: partition@0 { + reg = <0x0 0x20000>; + label = "urlader"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "tffs (1)"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "tffs (2)"; + read-only; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&urlader 0x987>; + mtd-mac-address-increment = <(-2)>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts new file mode 100644 index 0000000000..34d0df9b3b --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7320.dts @@ -0,0 +1,161 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "avm,fritz7320", "lantiq,xway", "lantiq,ar9"; + model = "1&1 HomeServer"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + led-running = &power; + + led-internet = &info_green; + led-dsl = &power; + led-wifi = &wlan; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + ath9k_cal: partition@0 { + label = "urlader"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0xf60000>; + }; + + partition@f80000 { + label = "tffs (1)"; + reg = <0xf80000 0x40000>; + read-only; + }; + + partition@fc0000 { + label = "tffs (2)"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci { + lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4"; + lantiq,function = "pci"; + }; + pci-in { + lantiq,groups = "req1", "req2", "req3", "req4"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci-out { + lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4"; + lantiq,output = <1>; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + phy-mode = "mii"; + mtd-mac-address = <&ath9k_cal 0xa91>; + mtd-mac-address-increment = <(-2)>; + }; + + ifxhcd@E101000 { + status = "okay"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + rfkill { + label = "rfkill"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + dect { + label = "dect"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PHONE>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power: power { + label = "fritz7320:green:power"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + voice { + label = "fritz7320:green:fon"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + dect { + label = "fritz7320:green:dect"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + wlan: wlan { + label = "fritz7320:green:wlan"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + info_green: info_green { + label = "fritz7320:green:info"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + info_red { + label = "fritz7320:red:info"; + gpios = <&gpio 45 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + req-mask = <0xf>; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@0,0 { + compatible = "pci0,0"; + reg = <0x7000 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:00:0e.0.bin */ + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts new file mode 100644 index 0000000000..b164871101 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/FRITZ7360SL.dts @@ -0,0 +1,228 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "avm,fritz7360sl", "lantiq,xway", "lantiq,vr9"; + model = "1&1 HomeServer"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &info_green; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + urlader: partition@0 { + label = "urlader"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0xf60000>; + }; + + partition@f80000 { + label = "tffs (1)"; + reg = <0xf80000 0x40000>; + read-only; + }; + + partition@fc0000 { + label = "tffs (2)"; + reg = <0xfc0000 0x40000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + phy-rst { + lantiq,pins = "io37", "io44"; + lantiq,pull = <0>; + lantiq,open-drain; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + lantiq,portmask = <0x3>; + }; + + ifxhcd@E106000 { + status = "okay"; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/xrx200_phy11g_a22.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + dect { + label = "dect"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_PHONE>; + }; + wifi { + label = "wifi"; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_WLAN>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_green: power { + label = "fritz7360sl:green:power"; + gpios = <&gpio 32 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "fritz7360sl:red:power"; + gpios = <&gpio 33 GPIO_ACTIVE_LOW>; + }; + info_red { + label = "fritz7360sl:red:info"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + }; + info_green: info_green { + label = "fritz7360sl:green:info"; + gpios = <&gpio 47 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "fritz7360sl:green:wlan"; + gpios = <&gpio 36 GPIO_ACTIVE_LOW>; + }; + dect { + label = "fritz7360sl:green:dect"; + gpios = <&gpio 35 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&urlader 0xa91>; + mtd-mac-address-increment = <(-2)>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x00>; + compatible = "ethernet-phy-ieee802.3-c22"; + reset-gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + phy1: ethernet-phy@1 { + reg = <0x01>; + compatible = "ethernet-phy-ieee802.3-c22"; + reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + qca,no-eeprom; /* load from ath9k-eeprom-pci-0000:01:00.0.bin */ + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/GIGASX76X.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/GIGASX76X.dts new file mode 100644 index 0000000000..99ccbce296 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/GIGASX76X.dts @@ -0,0 +1,122 @@ +/dts-v1/; + +#include "danube.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "siemens,gigaset-sx76x", "lantiq,xway", "lantiq,danube"; + model = "Gigaset SX761,SX762,SX763"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpiomm 1 GPIO_ACTIVE_HIGH>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x30000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x30000 0x10000>; + }; + + partition@40000 { + label = "firmware"; + reg = <0x40000 0x7c0000>; + }; + }; + }; + + gpiomm: gpiomm@4000000 { + compatible = "lantiq,gpio-mm"; + reg = <1 0x0 0x10 >; + #address-cells = <1>; + #size-cells = <1>; + #gpio-cells = <2>; + gpio-controller; + lantiq,shadow = <0x3>; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + }; + }; + + gpios: stp@E100BB0 { + status = "okay"; + }; + + etop@E180000 { + phy-mode = "rmii"; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; + }; + + pci@E105400 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/H201L.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/H201L.dts new file mode 100644 index 0000000000..01016f45c9 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/H201L.dts @@ -0,0 +1,159 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "zte,h201l", "lantiq,xway", "lantiq,ar9"; + model = "ZTE H210L"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_green; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &online; + led-usb = &usb; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x20000>; + read-only; + }; + + partition@20000 { + label = "uboot_env"; + reg = <0x20000 0x10000>; + read-only; + }; + + partition@30000 { + label = "firmware"; + reg = <0x30000 0x7d0000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + }; + }; + + etop@E180000 { + phy-mode = "rgmii"; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + wps { + label = "wps"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 55 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_green: power { + label = "h201l:green:power"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + online: online { + label = "h201l:green:internet"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "h201l:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + phone { + label = "h201l:green:phone"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + }; + wps { + label = "h201l:green:wps"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "h201l:green:wlan"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "h201l:green:usb"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 38 GPIO_ACTIVE_HIGH>; + }; + usb { + gpio-export,name = "usb"; + gpio-export,output = <1>; + gpios = <&gpio 28 GPIO_ACTIVE_HIGH>; + }; + wifi { + gpio-export,name = "wifi"; + gpio-export,output = <1>; + gpios = <&gpio 7 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts new file mode 100644 index 0000000000..1b885ad841 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2601HNFX.dts @@ -0,0 +1,190 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "zyxel,p-2601hn", "lantiq,xway", "lantiq,ar9"; + model = "ZyXEL P-2601HN-Fx"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &online; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@60000 { + label = "firmware"; + reg = <0x60000 0xfa0000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; + lantiq,open-drain; + lantiq,pull = <0>; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + }; + }; + + etop@E180000 { + phy-mode = "rmii"; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + }; + + stp: stp@E100BB0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xE100BB0 0x40>; + + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 53 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 54 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_green: power { + label = "p2601hnfx:green:power"; + gpios = <&stp 11 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "p2601hnfx:red:power"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + online: online { + label = "p2601hnfx:green:internet"; + gpios = <&stp 13 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "p2601hnfx:red:internet"; + gpios = <&stp 12 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "p2601hnfx:green:dsl"; + gpios = <&stp 14 GPIO_ACTIVE_LOW>; + }; + phone { + label = "p2601hnfx:green:phone"; + gpios = <&stp 9 GPIO_ACTIVE_LOW>; + }; + phone2 { + label = "p2601hnfx:orange:phone"; + gpios = <&stp 8 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "p2601hnfx:green:wireless"; + gpios = <&stp 15 GPIO_ACTIVE_LOW>; + }; + wifi2 { + label = "p2601hnfx:orange:wireless"; + gpios = <&stp 10 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_export { + compatible = "gpio-export"; + #size-cells = <0>; + + switch { + gpio-export,name = "switch"; + gpio-export,output = <1>; + gpios = <&gpio 50 GPIO_ACTIVE_HIGH>; + }; + usb { + gpio-export,name = "wifi"; + gpio-export,output = <1>; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF1.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF1.dts new file mode 100644 index 0000000000..4a29cd9296 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF1.dts @@ -0,0 +1,72 @@ +/dts-v1/; + +#include "P2812HNUFX.dtsi" + +/ { + compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; + model = "ZyXEL P-2812HNU-F1"; + + aliases { + led-usb = &usb1; + led-usb2 = &usb2; + }; + + fpi@10000000 { + localbus@0 { + nand-parts@0 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + }; + partition@40000 { + label = "uboot-env"; + reg = <0x40000 0x20000>; + }; + partition@60000 { + label = "kernel"; + reg = <0x60000 0x200000>; + }; + partition@260000 { + label = "ubi"; + reg = <0x260000 0x7da0000>; + }; + }; + }; + }; + + pcie@d900000 { + status = "disabled"; + }; + }; + + gpio-leds { + usb1: usb1 { + label = "p2812hnuf1:green:usb1"; + gpios = <&gpio 38 GPIO_ACTIVE_LOW>; + }; + usb2: usb2 { + label = "p2812hnuf1:green:usb2"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + wifi@1814,3062 { + compatible = "pci1814,3062"; + reg = <0x7000 0 0 0 0>; + ralink,eeprom = "RT3062.eeprom"; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF3.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF3.dts new file mode 100644 index 0000000000..d37ad0a8e5 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUF3.dts @@ -0,0 +1,66 @@ +/dts-v1/; + +#include "P2812HNUFX.dtsi" + +/ { + compatible = "zyxel,p-2812hnu-f3", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; + model = "ZyXEL P-2812HNU-F3"; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x0 0x50000>; + read-only; + }; + partition@50000 { + label = "uboot-env"; + reg = <0x50000 0x10000>; + }; + partition@60000 { + label = "unused"; + reg = <0x60000 0x7a0000>; + }; + }; + }; + + nand-parts@0 { + compatible = "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <1 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x0 0x200000>; + }; + partition@200000 { + label = "ubi"; + reg = <0x200000 0x7e00000>; + }; + }; + }; + }; +}; + +&pci0 { + wifi@1814,3092 { + compatible = "pci1814,3092"; + reg = <0x7000 0 0 0 0>; + ralink,eeprom = "RT3092.eeprom"; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi new file mode 100644 index 0000000000..ec3bd1033d --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/P2812HNUFX.dtsi @@ -0,0 +1,280 @@ +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl_green; + led-internet = &internet_green; + led-wifi = &wireless_green; + }; + + memory@0 { + reg = <0x0 0x8000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + exin3 { + lantiq,groups = "exin3"; + lantiq,function = "exin"; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", "gphy1 led1", + "gphy0 led2", "gphy1 led2"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pci-in { + lantiq,groups = "req1"; + lantiq,function = "pci"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci-out { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + ifxhcd-rst { + lantiq,pins = "io33"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + nand_out { + lantiq,groups = "nand cle", "nand ale"; + lantiq,function = "ebu"; + lantiq,output = <1>; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + nand_cs1 { + lantiq,groups = "nand cs1"; + lantiq,function = "ebu"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + }; + }; + }; + + stp: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xffffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x0>; + lantiq,phy1 = <0x0>; + lantiq,phy2 = <0x0>; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + + ifxhcd@E106000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + + pci@E105400 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + internet_red { + label = "p2812hnufx:red:internet"; + gpios = <&stp 16 GPIO_ACTIVE_LOW>; + }; + internet_green: internet_green { + label = "p2812hnufx:green:internet"; + gpios = <&stp 17 GPIO_ACTIVE_LOW>; + }; + dsl_green: dsl_green { + label = "p2812hnufx:green:dsl"; + gpios = <&stp 18 GPIO_ACTIVE_LOW>; + }; + dsl_orange { + label = "p2812hnufx:orange:dsl"; + gpios = <&stp 19 GPIO_ACTIVE_LOW>; + }; + wireless_orange { + label = "p2812hnufx:orange:wlan"; + gpios = <&stp 20 GPIO_ACTIVE_LOW>; + }; + wireless_green: wireless_green { + label = "p2812hnufx:green:wlan"; + gpios = <&stp 21 GPIO_ACTIVE_LOW>; + }; + power_red: power { + label = "p2812hnufx:red:power"; + gpios = <&stp 22 GPIO_ACTIVE_LOW>; + }; + power_green: power2 { + label = "p2812hnufx:green:power"; + gpios = <&stp 23 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + phone1 { + label = "p2812hnufx:green:phone"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + phone1warn { + label = "p2812hnufx:orange:phone"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + phone2warn { + label = "p2812hnufx:orange:phone2"; + gpios = <&gpio 26 GPIO_ACTIVE_LOW>; + }; + phone2 { + label = "p2812hnufx:green:phone2"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8970.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8970.dts new file mode 100644 index 0000000000..25eb3dac67 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8970.dts @@ -0,0 +1,8 @@ +/dts-v1/; + +#include "TDW89X0.dtsi" + +/ { + compatible = "tplink,tdw8970", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK TD-W8970"; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8980.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8980.dts new file mode 100644 index 0000000000..def34b55bb --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW8980.dts @@ -0,0 +1,35 @@ +/dts-v1/; + +#include "TDW89X0.dtsi" + +/ { + compatible = "tplink,tdw8980", "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK TD-W8980"; + + fpi@10000000 { + gpio: pinmux@E100B10 { + state_default: pinmux { + pci_rst { + lantiq,pins = "io21"; + lantiq,output = <1>; + lantiq,open-drain; + }; + }; + }; + + pci@E105400 { + status = "okay"; + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + wifi2 { + label = "tdw8980:green:wlan5ghz"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW89X0.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW89X0.dtsi new file mode 100644 index 0000000000..a629d92e4f --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/TDW89X0.dtsi @@ -0,0 +1,274 @@ +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "tplink,tdw89x0", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + /* the power led can't be controlled, use the wps led instead */ + led-boot = &wps; + led-failsafe = &wps; + + led-dsl = &dsl; + led-internet = &internet; + led-wifi = &wifi; + led-usb = &usb0; + led-usb2 = &usb2; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", "gphy1 led1"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + + ifxhcd@E106000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/xrx200_phy11g_a22.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RFKILL>; + linux,input-type = <EV_SW>; + }; + + wps { + label = "wps"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + /* + power is not controllable via gpio + */ + dsl: dsl { + label = "tdw89x0:green:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + internet: internet { + label = "tdw89x0:green:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; + }; + usb0: usb0 { + label = "tdw89x0:green:usb"; + gpios = <&gpio 19 GPIO_ACTIVE_HIGH>; + }; + usb2: usb2 { + label = "tdw89x0:green:usb2"; + gpios = <&gpio 20 GPIO_ACTIVE_HIGH>; + }; + wps: wps { + label = "tdw89x0:green:wps"; + gpios = <&gpio 37 GPIO_ACTIVE_HIGH>; + }; + }; + + wifi-leds { + compatible = "gpio-leds"; + + wifi: wifi { + label = "tdw89x0:green:wifi"; + gpios = <&ath9k 0 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <33250000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x7a0000>; + label = "firmware"; + }; + + partition@7c0000 { + reg = <0x7c0000 0x10000>; + label = "config"; + read-only; + }; + + ath9k_cal: partition@7d0000 { + reg = <0x7d0000 0x30000>; + label = "boardconfig"; + read-only; + }; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&ath9k_cal 0xf100>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; + +&pcie0 { + pcie@0 { + reg = <0 0 0 0 0>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + device_type = "pci"; + + ath9k: wifi@168c,002e { + compatible = "pci168c,002e"; + reg = <0 0 0 0 0>; + #gpio-cells = <2>; + gpio-controller; + qca,no-eeprom; + qca,disable-5ghz; + mtd-mac-address = <&ath9k_cal 0xf100>; + mtd-mac-address-increment = <2>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts new file mode 100644 index 0000000000..8a73de9a26 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts @@ -0,0 +1,163 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9"; + model = "BT OpenReach VDSL Modem"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + localbus@0 { + ranges = <0 0 0x0 0x3ffffff>; + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x20000>; + }; + + partition@20000 { + label = "firmware"; + reg = <0x20000 0x7d0000>; + }; + + partition@7f0000 { + label = "uboot-env"; + reg = <0x7f0000 0x10000>; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led0", "gphy0 led1", + "gphy0 led2", "gphy1 led0", + "gphy1 led1", "gphy1 led2"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + }; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_red: power2 { + label = "vg3503j:red:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "vg3503j:green:dsl"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + power_green: power { + label = "vg3503j:green:power"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + }; +}; + +ð0 { + interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + lantiq,switch; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,led1h = <0x70>; + lantiq,led1l = <0x00>; + lantiq,led2h = <0x00>; + lantiq,led2l = <0x03>; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi new file mode 100644 index 0000000000..fb4486aca2 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22.dtsi @@ -0,0 +1,253 @@ +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &internet_green; + led-wifi = &wifi; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay + &gpio 31 GPIO_ACTIVE_HIGH //still unknown + &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? + }; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x1000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boardconfig: partition@fe0000 { + label = "board_config"; + reg = <0xfe0000 0x20000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + gphy-leds { + lantiq,groups = "gphy0 led0", "gphy0 led1", + "gphy1 led0", "gphy1 led1"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <2>; + lantiq,output = <1>; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + pci-rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + }; + + pcie@d900000 { + status = "disabled"; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy22f_a14.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/xrx200_phy22f_a22.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + reset { + label = "reset"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + dsl: dsl { + label = "vgv7510kw22:green:dsl"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + + internet_red { + label = "vgv7510kw22:red:internet"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + }; + + info_red { + label = "vgv7510kw22:red:info"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + + power_green: power { + label = "vgv7510kw22:green:power"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + + info_green { + label = "vgv7510kw22:green:info"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + internet_green: internet_green { + label = "vgv7510kw22:green:internet"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + }; + + wifi: wifi { + label = "vgv7510kw22:green:wlan"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + + power_red: power2 { + label = "vgv7510kw22:red:power"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + }; + + phone { + label = "vgv7510kw22:green:telefon"; + gpios = <&gpio 29 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@1814,3592 { + compatible = "pci1814,3592"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&boardconfig 0x16>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "mii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-ieee802.3-c22"; + }; + + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22BRN.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22BRN.dts new file mode 100644 index 0000000000..d0be62f632 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22BRN.dts @@ -0,0 +1,67 @@ +/dts-v1/; + +#include "VGV7510KW22.dtsi" + +/ { + compatible = "arcadyan,vgv7510kw22-brn", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; + model = "o2 Box 6431"; + + sram@1F000000 { + cgu@103000 { + lantiq,phy-clk-src = <0x2>; + }; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + partitions { + partition@0 { + label = "Boot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "Configuration"; + reg = <0x40000 0x40000>; + read-only; + }; + + partition@80000 { + label = "Certificate"; + reg = <0x80000 0x20000>; + read-only; + }; + + partition@a0000 { + label = "Special_Area"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@c0000 { + compatible = "brnboot,root-selector"; + label = "Primary_Setting"; + reg = <0xc0000 0x20000>; + read-only; + }; + + partition@e0000 { + label = "Code_Image_0"; + reg = <0xe0000 0x780000>; + brnboot,root-id = <0x00>; + read-only; + }; + + partition@860000 { + label = "Code_Image_1"; + reg = <0x860000 0x780000>; + brnboot,root-id = <0x01>; + read-only; + }; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22NOR.dts new file mode 100644 index 0000000000..1d21e14f0a --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7510KW22NOR.dts @@ -0,0 +1,33 @@ +/dts-v1/; + +#include "VGV7510KW22.dtsi" + +/ { + compatible = "arcadyan,vgv7510kw22-nor", "arcadyan,vgv7510kw22", "lantiq,xway", "lantiq,vr9"; + model = "o2 Box 6431"; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + partitions { + partition@0 { + label = "uboot"; + reg = <0x0 0x60000>; /* 384 KiB */ + read-only; + }; + + partition@60000 { + label = "uboot-env"; + reg = <0x60000 0x20000>; /* 128 KiB */ + read-only; + }; + + partition@80000 { + label = "firmware"; + reg = <0x80000 0xf60000>; /* 15744 KiB */ + }; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519.dtsi new file mode 100644 index 0000000000..e807b52715 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519.dtsi @@ -0,0 +1,298 @@ +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; + + chosen { + bootargs = "console=ttyLTQ0,115200 mem=62M vpe1_load_addr=0x83e00000 vpe1_mem=2M maxvpes=1 maxtcs=1 nosmp"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &broadband_green; + led-internet = &internet_green; + led-wifi = &wireless_green; + }; + + sram@1F000000 { + vmmc@107000 { + status = "okay"; + gpios = <&gpio 30 GPIO_ACTIVE_HIGH //fxs relay + &gpio 31 GPIO_ACTIVE_HIGH //still unknown + &gpio 3 GPIO_ACTIVE_HIGH>; //reset_slic? + }; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x800000>, <1 0x800000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + boardconfig: partition@40000 { + label = "board_config"; + reg = <0x40000 0x10000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + lantiq,open-drain = <0>; + lantiq,output = <1>; + lantiq,pull = <0>; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + pci-rst { + lantiq,pins = "io21"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", "gphy1 led0"; + lantiq,function = "gphy"; + lantiq,open-drain = <0>; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + stp: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xffff>; + lantiq,groups = <0x3>; + lantiq,dsl = <0x0>; + lantiq,phy1 = <0x0>; + lantiq,phy2 = <0x0>; + /* lantiq,rising; */ + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + + ifxhcd@E106000 { + status = "okay"; + gpios = <&gpio 32 GPIO_ACTIVE_HIGH>; + }; + + pcie@d900000 { + status = "disabled"; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware1 = "lantiq/xrx200_phy11g_a14.bin"; /*VR9 1.1*/ + firmware2 = "lantiq/xrx200_phy11g_a22.bin"; /*VR9 1.2*/ + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 9 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + eco { + label = "eco"; + gpios = <&gpio 41 GPIO_ACTIVE_LOW>; + linux,code = <BTN_0>; + }; + rfkill { + label = "rfkill"; + gpios = <&gpio 45 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RFKILL>; + }; + wps { + label = "wps"; + gpios = <&gpio 10 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + eco { + label = "vgv7519:blue:eco"; + gpios = <&stp 2 GPIO_ACTIVE_LOW>; + }; + wps_red { + label = "vgv7519:red:wps"; + gpios = <&stp 3 GPIO_ACTIVE_LOW>; + }; + wps_green { + label = "vgv7519:green:wps"; + gpios = <&stp 4 GPIO_ACTIVE_LOW>; + }; + upgrade { + label = "vgv7519:blue:upgrade"; + gpios = <&stp 5 GPIO_ACTIVE_LOW>; + }; + tv { + label = "vgv7519:green:tv"; + gpios = <&stp 6 GPIO_ACTIVE_LOW>; + }; + internet_green: internet_green { + label = "vgv7519:green:internet"; + gpios = <&stp 7 GPIO_ACTIVE_LOW>; + }; + internet_red { + label = "vgv7519:red:internet"; + gpios = <&stp 8 GPIO_ACTIVE_LOW>; + }; + broadband_red { + label = "vgv7519:red:broadband"; + gpios = <&stp 9 GPIO_ACTIVE_LOW>; + }; + broadband_green: broadband_green { + label = "vgv7519:green:broadband"; + gpios = <&stp 10 GPIO_ACTIVE_LOW>; + }; + voice { + label = "vgv7519:green:voice"; + gpios = <&stp 11 GPIO_ACTIVE_LOW>; + }; + wireless_red { + label = "vgv7519:red:wireless"; + gpios = <&stp 12 GPIO_ACTIVE_LOW>; + }; + wireless_green: wireless_green { + label = "vgv7519:green:wireless"; + gpios = <&stp 13 GPIO_ACTIVE_LOW>; + }; + power_green: power2 { + label = "vgv7519:green:power"; + gpios = <&stp 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power { + label = "vgv7519:red:power"; + gpios = <&stp 15 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pci0 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + + wifi@1814,3091 { + compatible = "pci1814,3091"; + reg = <0x7000 0 0 0 0>; + ralink,mtd-eeprom = <&boardconfig 0x410>; + ralink,mtd-eeprom-swap; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <1>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519BRN.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519BRN.dts new file mode 100644 index 0000000000..f30d2f920e --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519BRN.dts @@ -0,0 +1,73 @@ +/dts-v1/; + + +#include "VGV7519.dtsi" + +/ { + compatible = "arcadyan,vgv7519-brn", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; + model = "KPN Experiabox V8"; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + partitions { + partition@0 { + label = "Boot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@50000 { + label = "Certificate"; + reg = <0x50000 0x10000>; + read-only; + }; + partition@60000 { + label = "Special_Area"; + reg = <0x60000 0x10000>; + read-only; + }; + + partition@70000 { + label = " Reserve_0"; + reg = <0x70000 0x10000>; + read-only; + }; + + partition@80000 { + label = "Code_Image_0"; + reg = <0x80000 0x780000>; + brnboot,root-id = <0x00>; + read-only; + }; + + partition@4000000 { + compatible = "brnboot,root-selector"; + label = "Primary_Setting"; + reg = <0x4000000 0x10000>; + read-only; + }; + + partition@4010000 { + label = "Configuration"; + reg = <0x4010000 0x60000>; + read-only; + }; + + partition@4070000 { + label = " Reserve_1"; + reg = <0x4070000 0x10000>; + read-only; + }; + + partition@4080000 { + label = "Code_Image_1"; + reg = <0x4080000 0x780000>; + brnboot,root-id = <0x01>; + read-only; + }; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519NOR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519NOR.dts new file mode 100644 index 0000000000..ec548fbe72 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VGV7519NOR.dts @@ -0,0 +1,32 @@ +/dts-v1/; + + +#include "VGV7519.dtsi" + +/ { + compatible = "arcadyan,vgv7519-nor", "arcadyan,vgv7519", "lantiq,xway", "lantiq,vr9"; + model = "KPN Experiabox V8"; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + partitions { + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + partition@60000 { + label = "uboot_env"; + reg = <0x60000 0x10000>; + read-only; + }; + partition@80000 { + label = "firmware"; + reg = <0x80000 0xf80000>; + }; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts new file mode 100644 index 0000000000..6eccc5bdd9 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/VR200v.dts @@ -0,0 +1,283 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "tplink,vr200v", "lantiq,xway", "lantiq,vr9"; + model = "TP-LINK Archer VR200v"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power; + led-failsafe = &power; + + led-dsl = &dsl; + led-internet = &internet; + led-usb = &usb; + led-usb2 = &usb; + }; + + memory@0 { + reg = <0x0 0x7f00000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + gphy-leds { + lantiq,groups = "gphy0 led1", "gphy1 led1"; + lantiq,function = "gphy"; + lantiq,pull = <2>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + + ifxhcd@E106000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + + pci0: pci@E105400 { + status = "okay"; + gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/xrx200_phy11g_a22.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "reset"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wifi { + label = "wifi"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + linux,code = <KEY_RFKILL>; + linux,input-type = <EV_SW>; + }; + + wps { + label = "wps"; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + dect_paging { + label = "dect_paging"; + gpios = <&gpio 39 GPIO_ACTIVE_LOW>; + linux,code = <KEY_PHONE>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + power: power { + label = "vr200v:blue:power"; + gpios = <&gpio 46 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "vr200v:blue:dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_LOW>; + }; + internet: internet { + label = "vr200v:blue:internet"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "vr200v:blue:usb"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + }; + eth { + label = "vr200v:blue:lan"; + gpios = <&gpio 40 GPIO_ACTIVE_LOW>; + }; + wlan { + label = "vr200v:blue:wlan"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + wlan5g { + label = "vr200v:blue:wlan5g"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + phone { + label = "vr200v:blue:phone"; + gpios = <&gpio 44 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <33250000>; + m25p,fast-read; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x20000>; + label = "u-boot"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0xf90000>; + label = "firmware"; + }; + + partition@fb0000 { + reg = <0xfb0000 0x10000>; + label = "radioDECT"; + read-only; + }; + + partition@fc0000 { + reg = <0xfc0000 0x10000>; + label = "config"; + read-only; + }; + + romfile: partition@fd0000 { + reg = <0xfd0000 0x10000>; + label = "romfile"; + read-only; + }; + + partition@fe0000 { + reg = <0xfe0000 0x10000>; + label = "rom"; + read-only; + }; + + partition@ff0000 { + reg = <0xff0000 0x10000>; + label = "radio"; + read-only; + }; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mtd-mac-address = <&romfile 0xf100>; + lantiq,switch; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + // gpios = <&gpio 42 GPIO_ACTIVE_LOW>; + }; + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "gmii"; + phy-handle = <&phy13>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR.dts new file mode 100644 index 0000000000..fab99d00e7 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR.dts @@ -0,0 +1,185 @@ +/dts-v1/; + +#include "ar9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "buffalo,wbmr-hp-g300h", "lantiq,xway", "lantiq,ar9"; + model = "Buffalo WBMR-HP-G300H"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_green; + led-failsafe = &power_red; + led-running = &power_green; + + led-dsl = &dsl; + led-internet = &online_green; + led-usb = &usb; + led-wifi = &wifi; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + localbus@0 { + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + read-only; + }; + + partition@40000 { + label = "uboot_env"; + reg = <0x40000 0x20000>; + read-only; + }; + + partition@20000 { + label = "firmware"; + reg = <0x60000 0x1f20000>; + }; + + boardconfig: partition@1fc0000 { + label = "board"; + reg = <0x1fc0000 0x20000>; + read-only; + }; + + partition@1fe0000 { + label = "calibration"; + reg = <0x1fe0000 0x20000>; + read-only; + }; + }; + }; + }; + + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + pci-in { + lantiq,groups = "req1"; + lantiq,output = <0>; + lantiq,open-drain = <1>; + lantiq,pull = <2>; + }; + pci-out { + lantiq,groups = "gnt1"; + lantiq,output = <1>; + lantiq,pull = <0>; + }; + pci_rst { + lantiq,pins = "io21"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + }; + + etop@E180000 { + phy-mode = "rgmii"; + mtd-mac-address = <&boardconfig 0x10024>; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + + pci@E105400 { + status = "okay"; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + wps { + label = "wps"; + gpios = <&gpio 0 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + reset { + label = "reset"; + gpios = <&gpio 37 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + eject { + label = "eject"; + gpios = <&gpio 34 GPIO_ACTIVE_LOW>; + linux,code = <KEY_EJECTCD>; + }; + movie { + label = "movie"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VIDEO>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power_green: power { + label = "wbmr:green:power"; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + default-state = "keep"; + }; + power_red: power2 { + label = "wbmr:red:power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + }; + security { + label = "wbmr:yellow:security"; + gpios = <&gpio 14 GPIO_ACTIVE_LOW>; + }; + wifi: wifi { + label = "wbmr:green:wireless"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + dsl: dsl { + label = "wbmr:green:dsl"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + online_green: online { + label = "wbmr:green:internet"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + online2 { + label = "wbmr:red:internet"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + }; + movie { + label = "wbmr:blue:movie"; + gpios = <&gpio 20 GPIO_ACTIVE_LOW>; + }; + usb: usb { + label = "wbmr:green:usb"; + gpios = <&gpio 28 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR300.dts b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR300.dts new file mode 100644 index 0000000000..2ecfe4bc92 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/WBMR300.dts @@ -0,0 +1,306 @@ +/dts-v1/; + +#include "vr9.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + compatible = "buffalo,wbmr-300hpd", "lantiq,xway", "lantiq,vr9"; + model = "Buffalo WBMR-300HPD"; + + chosen { + bootargs = "console=ttyLTQ0,115200"; + }; + + aliases { + led-boot = &power_g; + led-failsafe = &diag_r; + led-running = &power_g; + + led-dsl = &dsl; + led-internet = &router_g; + led-wifi = &wifi_g; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + gpio: pinmux@E100B10 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + phy-rst { + lantiq,pins = "io42"; + lantiq,pull = <0>; + lantiq,open-drain = <0>; + lantiq,output = <1>; + }; + pcie-rst { + lantiq,pins = "io38"; + lantiq,pull = <0>; + lantiq,output = <1>; + }; + }; + pins_spi_default: pins_spi_default { + spi_in { + lantiq,groups = "spi_di"; + lantiq,function = "spi"; + }; + spi_out { + lantiq,groups = "spi_do", "spi_clk", + "spi_cs4"; + lantiq,function = "spi"; + lantiq,output = <1>; + }; + }; + }; + + ifxhcd@E101000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + lantiq,portmask = <0x3>; + }; + + ifxhcd@E106000 { + status = "okay"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/xrx200_phy22f_a22.bin"; + phys = [ 00 01 ]; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + power { + label = "power"; + gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + }; + + reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = <KEY_RESTART>; + }; + + wps { + label = "wps"; + gpios = <&gpio 31 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WPS_BUTTON>; + }; + + auto { + label = "auto"; + gpios = <&gpio 48 GPIO_ACTIVE_HIGH>; + linux,code = <BTN_0>; + linux,input-type = <EV_SW>; + }; + + router { + label = "router"; + gpios = <&gpio 2 GPIO_ACTIVE_HIGH>; + linux,code = <BTN_1>; + linux,input-type = <EV_SW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + diag_r: diag_r { + label = "wbmr300:red:diag"; + gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; + default_state = "off"; + }; + + wifi_g: wifi_g { + label = "wbmr300:green:wifi"; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; + }; + + dsl: dsl { + label = "dsl"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + + router_y: router_y { + label = "wbmr300:yellow:router"; + gpios = <&gpio 8 GPIO_ACTIVE_HIGH>; + }; + + wifi_y: wifi_y { + label = "wbmr300:yellow:wifi"; + gpios = <&gpio 9 GPIO_ACTIVE_HIGH>; + }; + + lan1: lan1 { + label = "wbmr300:green:lan1"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + }; + + wan: wan { + label = "wbmr300:green:wan"; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + }; + + lan3: lan3 { + label = "wbmr300:green:lan3"; + gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + }; + + lan2: lan2 { + label = "wbmr300:green:lan2"; + gpios = <&gpio 33 GPIO_ACTIVE_HIGH>; + }; + + internet_g: internet_g { + label = "wbmr300:green:internet"; + gpios = <&gpio 34 GPIO_ACTIVE_HIGH>; + }; + + internet_y: internet_y { + label = "wbmr300:yellow:internet"; + gpios = <&gpio 35 GPIO_ACTIVE_HIGH>; + }; + + router_g: router_g { + label = "wbmr300:green:router"; + gpios = <&gpio 36 GPIO_ACTIVE_HIGH>; + }; + + power_g: power_g { + label = "wbmr300:green:power"; + gpios = <&gpio 49 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&spi { + pinctrl-names = "default"; + pinctrl-0 = <&pins_spi_default>; + + status = "ok"; + m25p80@4 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <4 0>; + spi-max-frequency = <20000000>; + + partition@0 { + reg = <0x0 0x10000>; + label = "u-boot"; + read-only; + }; + + partition@10000 { + reg = <0x10000 0x10000>; + label = "gphyfirmware"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x80000>; + label = "dsl_fw"; + }; + + partition@de0000 { + reg = <0xa0000 0xf40000>; + label = "firmware"; + }; + + partition@fe0000 { + reg = <0xfe0000 0x10000>; + label = "sysconfig"; + read-only; + }; + + partition@ff0000 { + reg = <0xff0000 0x2000>; + label = "ubootconfig"; + }; + + partition@ff3000 { + reg = <0xff3000 0x2000>; + label = "board_config"; + read-only; + }; + }; +}; + +ð0 { + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + lantiq,switch; + + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phy-mode = "mii"; + phy-handle = <&phy13>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "mii"; + phy-handle = <&phy14>; + }; + ethernet@3 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "mii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <3>; + phy-mode = "mii"; + phy-handle = <&phy12>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy12: ethernet-phy@12 { + reg = <0x12>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + phy14: ethernet-phy@14 { + reg = <0x14>; + compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/amazonse.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/amazonse.dtsi new file mode 100644 index 0000000000..e6925a3adf --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/amazonse.dtsi @@ -0,0 +1,174 @@ +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,ase"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + cpu@0 { + compatible = "mips,mips4Kc"; + }; + }; + + memory@0 { + device_type = "memory"; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <29 30 31>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + spi@E100800 { + compatible = "lantiq,ase-spi"; + reg = <0xE100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <24 25 26>; + interrupt-names = "spi_rx", "spi_tx", "spi_err", + "spi_frm"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <33 34 35 36 37 38>; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,ase-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + }; + + asc1: serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <72 74 75>; + }; + + mei@E116000 { + compatible = "lantiq,mei-xway"; + interrupt-parent = <&icu0>; + interrupts = <81>; + }; + + ifxhcd@E101000 { + compatible = "lantiq,ase-usb", "lantiq,ifxhcd-ase"; + reg = <0xE101000 0x1000 + 0xE120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <39>; + dr_mode = "host"; + status = "disabled"; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + ppe@E234000 { + compatible = "lantiq,ppe-ase"; + interrupt-parent = <&icu0>; + interrupts = <85>; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <105 109>; + }; + }; + + adsl { + compatible = "lantiq,adsl-ase"; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ar9.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ar9.dtsi new file mode 100644 index 0000000000..2638a4b268 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/ar9.dtsi @@ -0,0 +1,216 @@ +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,ar9"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + cpu@0 { + compatible = "mips,mips34K"; + }; + }; + + memory@0 { + device_type = "memory"; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <166 135 66 40 41 42>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + asc0: serial@E100400 { + compatible = "lantiq,asc"; + reg = <0xE100400 0x400>; + interrupt-parent = <&icu0>; + interrupts = <104 105 106>; + status = "disabled"; + }; + + spi: spi@E100800 { + compatible = "lantiq,xrx100-spi"; + reg = <0xE100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <22 23 24>; + interrupt-names = "spi_rx", "spi_tx", "spi_err", + "spi_frm"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,xrx100-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + }; + + asc1: serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + ifxhcd@E101000 { + compatible = "lantiq,arx100-usb", "lantiq,ifxhcd-arx100"; + reg = <0xE101000 0x1000 + 0xE120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <62 91>; + dr_mode = "host"; + status = "disabled"; + }; + + ifxhcd@E106000 { + compatible = "lantiq,arx100-usb"; + reg = <0xE106000 0x1000 + 0xE1E0000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <91>; + dr_mode = "host"; + status = "disabled"; + }; + + deu@E103100 { + compatible = "lantiq,deu-arx100"; + reg = <0xE103100 0xf00>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + mei@E116000 { + compatible = "lantiq,mei-xway"; + interrupt-parent = <&icu0>; + interrupts = <63>; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000 + 0xE108000 0x200>; + interrupt-parent = <&icu0>; + interrupts = <73 72>; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + ppe@E234000 { + compatible = "lantiq,ppe-arx100"; + interrupt-parent = <&icu0>; + interrupts = <96>; + }; + + pci0: pci@E105400 { + status = "disabled"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; + req-mask = <0x1>; + }; + }; + + adsl { + compatible = "lantiq,adsl-arx100"; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/danube.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/danube.dtsi new file mode 100644 index 0000000000..83e85c36a5 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/danube.dtsi @@ -0,0 +1,212 @@ +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,danube"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + cpu@0 { + compatible = "mips,mips24Kc"; + }; + }; + + memory@0 { + device_type = "memory"; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <166 135 66>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + vmmc@107000 { + status = "disabled"; + compatible = "lantiq,vmmc-xway"; + reg = <0x103000 0x400>; + interrupt-parent = <&icu0>; + interrupts = <150 151 152 153 154 155>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + gpios: stp@E100BB0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xE100BB0 0x40>; + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + status = "disabled"; + }; + + asc0: serial@E100400 { + compatible = "lantiq,asc"; + reg = <0xE100400 0x400>; + interrupt-parent = <&icu0>; + interrupts = <104 105 106>; + status = "disabled"; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,danube-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + }; + + asc1: serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + ifxhcd@E101000 { + compatible = "lantiq,danube-usb", "lantiq,ifxhcd-danube"; + reg = <0xE101000 0x1000 + 0xE120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <62>; + dr_mode = "host"; + status = "disabled"; + }; + + deu@E103100 { + compatible = "lantiq,deu-danube"; + reg = <0xE103100 0xf00>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + mei@E116000 { + compatible = "lantiq,mei-xway"; + interrupt-parent = <&icu0>; + interrupts = <63>; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73 78>; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + ppe@E234000 { + compatible = "lantiq,ppe-danube"; + interrupt-parent = <&icu0>; + interrupts = <96>; + }; + + pci0: pci@E105400 { + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ + req-mask = <0x1>; /* GNT1 */ + }; + }; + + adsl { + compatible = "lantiq,adsl-danube"; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon-sflash-16M.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon-sflash-16M.dtsi new file mode 100644 index 0000000000..d95acc21ef --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon-sflash-16M.dtsi @@ -0,0 +1,37 @@ + +&ebu_cs0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sflash-falcon", "simple-bus"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl129p0", "spansion,s25fl129p1"; + reg = <0 0>; + linux,mtd-name = "sflash"; + spi-max-frequency = <80000000>; + m25p,fast-read; + + partition@0 { + reg = <0x0 0x40000>; + label = "uboot"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x80000>; + label = "uboot_env"; + }; + + partition@C0000 { + reg = <0xC0000 0x740000>; + label = "image0"; + }; + + partition@800000 { + reg = <0x800000 0x800000>; + label = "image1"; + }; + }; +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon.dtsi new file mode 100644 index 0000000000..98f71819a2 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/falcon.dtsi @@ -0,0 +1,392 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,falcon"; + + cpus { + cpu@0 { + compatible = "mips,mips34kc"; + }; + }; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + gpio3 = &gpio3; + gpio4 = &gpio4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + clocks { + compatible = "simple-bus"; + + cpu_clk: cpu { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <400000000>; + clock-output-names = "cpu"; + }; + + io_clk: io { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <200000000>; + clock-output-names = "io"; + }; + + fpi_clk: fpi { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "fpi"; + }; + }; + + ebu_cs0: localbus@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,localbus", "simple-bus"; + reg = <0x10000000 0x4000000>; + ranges = <0x0 0x10000000 0x4000000>; + }; + ebu_cs1: localbus@14000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,localbus", "simple-bus"; + reg = <0x14000000 0x4000000>; + ranges = <0x0 0x14000000 0x4000000>; + }; + + ebu@18000000 { + compatible = "lantiq,ebu-falcon"; + reg = <0x18000000 0x100>; + }; + + sbs2@1D000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sysb2", "simple-bus"; + reg = <0x1D000000 0x1000000>; + ranges = <0x0 0x1D000000 0x1000000>; + + clock_sysgpe: clock-controller@700000 { + compatible = "lantiq,sysgpe-falcon"; + reg = <0x700000 0x100>; + #clock-cells = <1>; + }; + + mps@4000 { + compatible = "lantiq,mps-falcon", "lantiq,mps-xrx100"; + reg = <0x4000 0x1000>; + interrupt-parent = <&icu0>; + interrupts = <154 155>; + lantiq,mbx = <&mpsmbx>; + }; + + gpio0: gpio@810000 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <44>; + reg = <0x810000 0x80>; + clocks = <&clock_syseth 16>; + }; + + gpio2: gpio@810100 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <46>; + reg = <0x810100 0x80>; + clocks = <&clock_syseth 17>; + }; + + clock_syseth: clock-controller@B00000 { + compatible = "lantiq,syseth-falcon"; + reg = <0xB00000 0x100>; + #clock-cells = <1>; + }; + + pad@B01000 { + compatible = "lantiq,pad-falcon"; + reg = <0xB01000 0x100>; + lantiq,bank = <0>; + clocks = <&clock_syseth 20>; + }; + + pad@B02000 { + compatible = "lantiq,pad-falcon"; + reg = <0xB02000 0x100>; + lantiq,bank = <2>; + clocks = <&clock_syseth 21>; + }; + }; + + fpi@1E000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + reg = <0x1E000000 0x1000000>; + ranges = <0x0 0x1E000000 0x1000000>; + + serial1: serial@100B00 { + status = "disabled"; + compatible = "lantiq,asc"; + reg = <0x100B00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + line = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&asc1_pins>; + clocks = <&clock_sys1 11>; + }; + + serial0: serial@100C00 { + compatible = "lantiq,asc"; + reg = <0x100C00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <104 105 106>; + line = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&asc0_pins>; + clocks = <&clock_sys1 12>; + }; + + spi: spi@100D00 { + status = "disabled"; + compatible = "lantiq,falcon-spi", "lantiq,xrx100-spi", "lantiq,spi-lantiq-ssc"; + interrupts = <22 23 24 25>; + interrupt-names = "spi_tx", "spi_rx", "spi_err", "spi_frm"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100D00 0x100>; + interrupt-parent = <&icu0>; + clocks = <&clock_sys1 13>; + base_cs = <1>; + num_cs = <2>; + }; + + gptc@100E00 { + compatible = "lantiq,gptc-falcon"; + reg = <0x100E00 0x100>; + }; + + i2c: i2c@200000 { + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,lantiq-i2c"; + reg = <0x200000 0x10000>; + interrupt-parent = <&icu0>; + interrupts = <18 19 20 21>; + gpios = <&gpio1 7 0 &gpio1 8 0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c_pins>; + clocks = <&clock_sys1 14>; + }; + + gpio1: gpio@800100 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <45>; + reg = <0x800100 0x100>; + clocks = <&clock_sys1 16>; + }; + + gpio3: gpio@800200 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <47>; + reg = <0x800200 0x100>; + clocks = <&clock_sys1 17>; + }; + + gpio4: gpio@800300 { + compatible = "lantiq,falcon-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&icu0>; + interrupts = <48>; + reg = <0x800300 0x100>; + clocks = <&clock_sys1 18>; + }; + + pad@800400 { + compatible = "lantiq,pad-falcon"; + reg = <0x800400 0x100>; + lantiq,bank = <1>; + clocks = <&clock_sys1 20>; + }; + + pad@800500 { + compatible = "lantiq,pad-falcon"; + reg = <0x800500 0x100>; + lantiq,bank = <3>; + clocks = <&clock_sys1 21>; + }; + + pad@800600 { + compatible = "lantiq,pad-falcon"; + reg = <0x800600 0x100>; + lantiq,bank = <4>; + clocks = <&clock_sys1 22>; + }; + + status@802000 { + compatible = "lantiq,status-falcon"; + reg = <0x802000 0x80>; + }; + + clock_sys1: clock-controller@F00000 { + compatible = "lantiq,sys1-falcon"; + reg = <0xF00000 0x100>; + #clock-cells = <1>; + }; + }; + + sbs0@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0x1F000000 0x400000>; + ranges = <0x0 0x1F000000 0x400000>; + + mpsmbx: mpsmbx@200000 { + reg = <0x200000 0x200>; + }; + }; + + sbs1@1F700000 { + + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x800000>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + clocks = <&io_clk>; /* currently no effect */ + }; + }; + + pinctrl { + compatible = "lantiq,pinctrl-falcon"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinctrl0 { + /*ntr { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + };*/ + hrst { + lantiq,groups = "hrst"; + lantiq,function = "rst"; + }; + }; + + asc0_pins: asc0 { + asc0 { + lantiq,groups = "asc0"; + lantiq,function = "asc"; + }; + }; + asc1_pins: asc1 { + asc1 { + lantiq,groups = "asc1"; + lantiq,function = "asc"; + }; + }; + i2c_pins: i2c { + i2c { + lantiq,groups = "i2c"; + lantiq,function = "i2c"; + }; + }; + bootled_pins: bootled { + bootled { + lantiq,groups = "bootled"; + lantiq,function = "led"; + }; + }; + ntr_ntr8k: ntr8k { + ntr8k { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + }; + }; + ntr_pps: pps { + pps { + lantiq,groups = "pps"; + lantiq,function = "ntr"; + }; + }; + ntr_gpio: gpio { + gpio { + lantiq,pins = "io5"; + lantiq,mux = <1>; + lantiq,output = <0>; + }; + }; + slic_pins: slic { + slic { + lantiq,groups = "slic"; + lantiq,function = "slic"; + }; + }; + }; + + pinselect-ntr { + compatible = "lantiq,onu-ntr","lantiq,pinselect-ntr"; + pinctrl-names = "ntr8k", "pps", "gpio"; + pinctrl-0 = <&ntr_ntr8k>; + pinctrl-1 = <&ntr_pps>; + pinctrl-2 = <&ntr_gpio>; + }; + + pinselect-asc1 { + compatible = "lantiq,onu-asc1","lantiq,pinselect-asc1"; + pinctrl-names = "default", "asc1"; + pinctrl-0 = <&slic_pins>; + pinctrl-1 = <&asc1_pins>; + }; + +}; diff --git a/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi new file mode 100644 index 0000000000..13bb002c52 --- /dev/null +++ b/target/linux/lantiq/files-4.14/arch/mips/boot/dts/vr9.dtsi @@ -0,0 +1,260 @@ +#include <dt-bindings/gpio/gpio.h> + +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,vr9"; + + aliases { + serial0 = &asc1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + cpus { + cpu@0 { + compatible = "mips,mips34Kc"; + }; + }; + + memory@0 { + device_type = "memory"; + }; + + cputemp@0 { + compatible = "lantiq,cputemp"; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + interrupt-parent = <&icu0>; + lantiq,eiu-irqs = <166 135 66 40 41 42>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + }; + + dcdc@106a00 { + compatible = "lantiq,dcdc-xrx200"; + reg = <0x106a00 0x200>; + }; + + vmmc@107000 { + status = "disabled"; + compatible = "lantiq,vmmc-xway"; + reg = <0x103000 0x400>; + interrupt-parent = <&icu0>; + interrupts = <150 151 152 153 154 155>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xrx200"; + reg = <0x203000 0x1000>; + /* irq for thermal sensor */ + interrupt-parent = <&icu0>; + interrupts = <115>; + }; + + xbar0: xbar@400000 { + compatible = "lantiq,xbar-xway"; + reg = <0x400000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + }; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + asc0: serial@E100400 { + compatible = "lantiq,asc"; + reg = <0xE100400 0x400>; + interrupt-parent = <&icu0>; + interrupts = <104 105 106>; + status = "disabled"; + }; + + spi: spi@E100800 { + compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; + reg = <0xE100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <22 23 24>; + interrupt-names = "spi_rx", "spi_tx", "spi_err", + "spi_frm"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,xrx200-pinctrl"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + }; + + asc1: serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + deu@E103100 { + compatible = "lantiq,deu-xrx200"; + reg = <0xE103100 0xf00>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + ifxhcd@E101000 { + status = "disabled"; + compatible = "lantiq,xrx200-usb", "lantiq,ifxhcd-xrx200"; + reg = <0xE101000 0x1000 + 0xE120000 0x3f000>; + interrupt-parent = <&icu0>; + interrupts = <62 91>; + dr_mode = "host"; + }; + + ifxhcd@E106000 { + status = "disabled"; + compatible = "lantiq,xrx200-usb"; + reg = <0xE106000 0x1000>; + interrupt-parent = <&icu0>; + interrupts = <91>; + dr_mode = "host"; + }; + + eth0: eth@E108000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = < 0xE108000 0x3000 /* switch */ + 0xE10B100 0x70 /* mdio */ + 0xE10B1D8 0x30 /* mii */ + 0xE10B308 0x30 /* pmac */ + >; + interrupt-parent = <&icu0>; + interrupts = <75 73 72>; + }; + + mei@E116000 { + compatible = "lantiq,mei-xrx200"; + reg = <0xE116000 0x9c>; + interrupt-parent = <&icu0>; + interrupts = <63>; + }; + + ppe@E234000 { + compatible = "lantiq,ppe-xrx200"; + interrupt-parent = <&icu0>; + interrupts = <96>; + }; + + pcie0: pcie@d900000 { + compatible = "lantiq,pcie-xrx200"; + + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + + interrupt-parent = <&icu0>; + interrupts = <161 144>; + + device_type = "pci"; + + gpio-reset = <&gpio 38 GPIO_ACTIVE_HIGH>; + }; + + pci0: pci@E105400 { + status = "disabled"; + + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = <0x7000 0 0 1 &icu0 30 1>; /* slot 14, irq 30 */ + req-mask = <0x1>; /* GNT1 */ + }; + }; + + vdsl { + compatible = "lantiq,vdsl-vrx200"; + }; +}; diff --git a/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch b/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch new file mode 100644 index 0000000000..91a6acce3a --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0001-MIPS-lantiq-add-pcie-driver.patch @@ -0,0 +1,5520 @@ +From 6f933347d0b4ed02d9534f5fa07f7b99f13eeaa1 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 7 Aug 2014 18:12:28 +0200 +Subject: [PATCH 01/36] MIPS: lantiq: add pcie driver + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/lantiq/Kconfig | 10 + + arch/mips/lantiq/xway/sysctrl.c | 2 + + arch/mips/pci/Makefile | 2 + + arch/mips/pci/fixup-lantiq-pcie.c | 82 +++ + arch/mips/pci/fixup-lantiq.c | 5 +- + arch/mips/pci/ifxmips_pci_common.h | 57 ++ + arch/mips/pci/ifxmips_pcie.c | 1099 ++++++++++++++++++++++++++++++ + arch/mips/pci/ifxmips_pcie.h | 135 ++++ + arch/mips/pci/ifxmips_pcie_ar10.h | 290 ++++++++ + arch/mips/pci/ifxmips_pcie_msi.c | 392 +++++++++++ + arch/mips/pci/ifxmips_pcie_phy.c | 478 +++++++++++++ + arch/mips/pci/ifxmips_pcie_pm.c | 176 +++++ + arch/mips/pci/ifxmips_pcie_pm.h | 36 + + arch/mips/pci/ifxmips_pcie_reg.h | 1001 +++++++++++++++++++++++++++ + arch/mips/pci/ifxmips_pcie_vr9.h | 271 ++++++++ + arch/mips/pci/pci.c | 25 + + arch/mips/pci/pcie-lantiq.h | 1305 ++++++++++++++++++++++++++++++++++++ + drivers/pci/pcie/aer/Kconfig | 2 +- + include/linux/pci.h | 2 + + include/linux/pci_ids.h | 6 + + 20 files changed, 5374 insertions(+), 2 deletions(-) + create mode 100644 arch/mips/pci/fixup-lantiq-pcie.c + create mode 100644 arch/mips/pci/ifxmips_pci_common.h + create mode 100644 arch/mips/pci/ifxmips_pcie.c + create mode 100644 arch/mips/pci/ifxmips_pcie.h + create mode 100644 arch/mips/pci/ifxmips_pcie_ar10.h + create mode 100644 arch/mips/pci/ifxmips_pcie_msi.c + create mode 100644 arch/mips/pci/ifxmips_pcie_phy.c + create mode 100644 arch/mips/pci/ifxmips_pcie_pm.c + create mode 100644 arch/mips/pci/ifxmips_pcie_pm.h + create mode 100644 arch/mips/pci/ifxmips_pcie_reg.h + create mode 100644 arch/mips/pci/ifxmips_pcie_vr9.h + create mode 100644 arch/mips/pci/pcie-lantiq.h + +--- a/arch/mips/lantiq/Kconfig ++++ b/arch/mips/lantiq/Kconfig +@@ -17,6 +17,7 @@ config SOC_XWAY + bool "XWAY" + select SOC_TYPE_XWAY + select HW_HAS_PCI ++ select ARCH_SUPPORTS_MSI + + config SOC_FALCON + bool "FALCON" +@@ -47,6 +48,15 @@ config PCI_LANTIQ + bool "PCI Support" + depends on SOC_XWAY && PCI + ++config PCIE_LANTIQ ++ bool "PCIE Support" ++ depends on SOC_XWAY && PCI ++ ++config PCIE_LANTIQ_MSI ++ bool ++ depends on PCIE_LANTIQ && PCI_MSI ++ default y ++ + config XRX200_PHY_FW + bool "XRX200 PHY firmware loader" + depends on SOC_XWAY +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -48,6 +48,8 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o + obj-$(CONFIG_SOC_MT7620) += pci-mt7620.o + obj-$(CONFIG_SOC_RT288X) += pci-rt2880.o + obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o ++obj-$(CONFIG_PCIE_LANTIQ) += ifxmips_pcie_phy.o ifxmips_pcie.o fixup-lantiq-pcie.o ++obj-$(CONFIG_PCIE_LANTIQ_MSI) += pcie-lantiq-msi.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o + obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o + obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o +--- /dev/null ++++ b/arch/mips/pci/fixup-lantiq-pcie.c +@@ -0,0 +1,74 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_fixup_pcie.c ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++/*! ++ \file ifxmips_fixup_pcie.c ++ \ingroup IFX_PCIE ++ \brief PCIe Fixup functions source file ++*/ ++#include <linux/pci.h> ++#include <linux/pci_regs.h> ++#include <linux/pci_ids.h> ++ ++#include <lantiq_soc.h> ++ ++#include "pcie-lantiq.h" ++ ++static void ++ifx_pcie_fixup_resource(struct pci_dev *dev) ++{ ++ u32 reg; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); ++ ++ printk("%s: fixup host controller %s (%04x:%04x)\n", ++ __func__, pci_name(dev), dev->vendor, dev->device); ++ ++ /* Setup COMMAND register */ ++ reg = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER /* | ++ PCI_COMMAND_INTX_DISABLE */| PCI_COMMAND_SERR; ++ pci_write_config_word(dev, PCI_COMMAND, reg); ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); ++} ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ifx_pcie_fixup_resource); ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_VENDOR_ID_LANTIQ, ifx_pcie_fixup_resource); ++ ++static void ++ifx_pcie_rc_class_early_fixup(struct pci_dev *dev) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: enter\n", __func__, pci_name(dev)); ++ ++ if (dev->devfn == PCI_DEVFN(0, 0) && ++ (dev->class >> 8) == PCI_CLASS_BRIDGE_HOST) { ++ ++ dev->class = (PCI_CLASS_BRIDGE_PCI << 8) | (dev->class & 0xff); ++ ++ printk(KERN_INFO "%s: fixed pcie host bridge to pci-pci bridge\n", __func__); ++ } ++ IFX_PCIE_PRINT(PCIE_MSG_FIXUP, "%s dev %s: exit\n", __func__, pci_name(dev)); ++ mdelay(10); ++} ++ ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INFINEON, PCI_DEVICE_ID_INFINEON_PCIE, ++ ifx_pcie_rc_class_early_fixup); ++ ++DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LANTIQ, PCI_DEVICE_ID_LANTIQ_PCIE, ++ ifx_pcie_rc_class_early_fixup); +--- a/arch/mips/pci/fixup-lantiq.c ++++ b/arch/mips/pci/fixup-lantiq.c +@@ -8,12 +8,18 @@ + + #include <linux/of_irq.h> + #include <linux/of_pci.h> ++#include "ifxmips_pci_common.h" + + int (*ltq_pci_plat_arch_init)(struct pci_dev *dev) = NULL; + int (*ltq_pci_plat_dev_init)(struct pci_dev *dev) = NULL; + + int pcibios_plat_dev_init(struct pci_dev *dev) + { ++#ifdef CONFIG_PCIE_LANTIQ ++ if (pci_find_capability(dev, PCI_CAP_ID_EXP)) ++ ifx_pcie_bios_plat_dev_init(dev); ++#endif ++ + if (ltq_pci_plat_arch_init) + return ltq_pci_plat_arch_init(dev); + +@@ -25,5 +31,10 @@ int pcibios_plat_dev_init(struct pci_dev + + int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) + { ++#ifdef CONFIG_PCIE_LANTIQ ++ if (pci_find_capability(dev, PCI_CAP_ID_EXP)) ++ return ifx_pcie_bios_map_irq(dev, slot, pin); ++#endif ++ + return of_irq_parse_and_map_pci(dev, slot, pin); + } +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pci_common.h +@@ -0,0 +1,57 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pci_common.h ++** PROJECT : IFX UEIP ++** MODULES : PCI subsystem ++** ++** DATE : 30 June 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 30 June,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++ ++#ifndef IFXMIPS_PCI_COMMON_H ++#define IFXMIPS_PCI_COMMON_H ++#include <linux/version.h> ++/*! ++ \defgroup IFX_PCI_COM IFX PCI/PCIe common parts for OS integration ++ \brief PCI/PCIe common parts ++*/ ++ ++/*! ++ \defgroup IFX_PCI_COM_OS OS APIs ++ \ingroup IFX_PCI_COM ++ \brief PCI/PCIe bus driver OS interface functions ++*/ ++/*! ++ \file ifxmips_pci_common.h ++ \ingroup IFX_PCI_COM ++ \brief PCI/PCIe bus driver common OS header file ++*/ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,24) ++#define IFX_PCI_CONST ++#else ++#define IFX_PCI_CONST const ++#endif ++#ifdef CONFIG_IFX_PCI ++extern int ifx_pci_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); ++extern int ifx_pci_bios_plat_dev_init(struct pci_dev *dev); ++#endif /* COFNIG_IFX_PCI */ ++ ++#ifdef CONFIG_PCIE_LANTIQ ++extern int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin); ++extern int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev); ++#endif ++ ++#endif /* IFXMIPS_PCI_COMMON_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie.c +@@ -0,0 +1,1092 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * Copyright (C) 2009 Lei Chuanhua <chuanhua.lei@infineon.com> ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/mm.h> ++#include <asm/paccess.h> ++#include <linux/pci.h> ++#include <linux/pci_regs.h> ++#include <linux/module.h> ++ ++#include "ifxmips_pcie.h" ++#include "ifxmips_pcie_reg.h" ++ ++/* Enable 32bit io due to its mem mapped io nature */ ++#define IFX_PCIE_ERROR_INT ++#define IFX_PCIE_IO_32BIT ++ ++#define IFX_PCIE_IR (INT_NUM_IM4_IRL0 + 25) ++#define IFX_PCIE_INTA (INT_NUM_IM4_IRL0 + 8) ++#define IFX_PCIE_INTB (INT_NUM_IM4_IRL0 + 9) ++#define IFX_PCIE_INTC (INT_NUM_IM4_IRL0 + 10) ++#define IFX_PCIE_INTD (INT_NUM_IM4_IRL0 + 11) ++#define MS(_v, _f) (((_v) & (_f)) >> _f##_S) ++#define SM(_v, _f) (((_v) << _f##_S) & (_f)) ++#define IFX_REG_SET_BIT(_f, _r) \ ++ IFX_REG_W32((IFX_REG_R32((_r)) &~ (_f)) | (_f), (_r)) ++ ++#define IFX_PCIE_LTSSM_ENABLE_TIMEOUT 10 ++ ++static DEFINE_SPINLOCK(ifx_pcie_lock); ++ ++u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); ++ ++static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { ++ { ++ .ir_irq = { ++ .irq = IFX_PCIE_IR, ++ .name = "ifx_pcie_rc0", ++ }, ++ ++ .legacy_irq = { ++ { ++ .irq_bit = PCIE_IRN_INTA, ++ .irq = IFX_PCIE_INTA, ++ }, ++ { ++ .irq_bit = PCIE_IRN_INTB, ++ .irq = IFX_PCIE_INTB, ++ }, ++ { ++ .irq_bit = PCIE_IRN_INTC, ++ .irq = IFX_PCIE_INTC, ++ }, ++ { ++ .irq_bit = PCIE_IRN_INTD, ++ .irq = IFX_PCIE_INTD, ++ }, ++ }, ++ }, ++ ++}; ++ ++void ifx_pcie_debug(const char *fmt, ...) ++{ ++ static char buf[256] = {0}; /* XXX */ ++ va_list ap; ++ ++ va_start(ap, fmt); ++ vsnprintf(buf, sizeof(buf), fmt, ap); ++ va_end(ap); ++ ++ printk("%s", buf); ++} ++ ++ ++static inline int pcie_ltssm_enable(int pcie_port) ++{ ++ int i; ++ ++ /* Enable LTSSM */ ++ IFX_REG_W32(PCIE_RC_CCR_LTSSM_ENABLE, PCIE_RC_CCR(pcie_port)); ++ ++ /* Wait for the link to come up */ ++ for (i = 0; i < IFX_PCIE_LTSSM_ENABLE_TIMEOUT; i++) { ++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_RETRAIN_PENDING)) ++ return 0; ++ udelay(10); ++ } ++ ++ printk("%s link timeout!!!!!\n", __func__); ++ return -1; ++} ++ ++static inline void pcie_status_register_clear(int pcie_port) ++{ ++ IFX_REG_W32(0, PCIE_RC_DR(pcie_port)); ++ IFX_REG_W32(0, PCIE_PCICMDSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_DCTLSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_LCTLSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_SLCTLSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_RSTS(pcie_port)); ++ IFX_REG_W32(0, PCIE_UES_R(pcie_port)); ++ IFX_REG_W32(0, PCIE_UEMR(pcie_port)); ++ IFX_REG_W32(0, PCIE_UESR(pcie_port)); ++ IFX_REG_W32(0, PCIE_CESR(pcie_port)); ++ IFX_REG_W32(0, PCIE_CEMR(pcie_port)); ++ IFX_REG_W32(0, PCIE_RESR(pcie_port)); ++ IFX_REG_W32(0, PCIE_PVCCRSR(pcie_port)); ++ IFX_REG_W32(0, PCIE_VC0_RSR0(pcie_port)); ++ IFX_REG_W32(0, PCIE_TPFCS(pcie_port)); ++ IFX_REG_W32(0, PCIE_TNPFCS(pcie_port)); ++ IFX_REG_W32(0, PCIE_TCFCS(pcie_port)); ++ IFX_REG_W32(0, PCIE_QSR(pcie_port)); ++ IFX_REG_W32(0, PCIE_IOBLSECS(pcie_port)); ++} ++ ++static inline int ifx_pcie_link_up(int pcie_port) ++{ ++ return (IFX_REG_R32(PCIE_PHY_SR(pcie_port)) & PCIE_PHY_SR_PHY_LINK_UP) ? 1 : 0; ++} ++ ++ ++static inline void pcie_mem_io_setup(int pcie_port) ++{ ++ u32 reg; ++ /* ++ * BAR[0:1] readonly register ++ * RC contains only minimal BARs for packets mapped to this device ++ * Mem/IO filters defines a range of memory occupied by memory mapped IO devices that ++ * reside on the downstream side fo the bridge. ++ */ ++ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_MBML_MEM_LIMIT_ADDR) ++ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_MBML_MEM_BASE_ADDR); ++ ++ IFX_REG_W32(reg, PCIE_MBML(pcie_port)); ++ ++ ++#ifdef IFX_PCIE_PREFETCH_MEM_64BIT ++ reg = SM((PCIE_MEM_PHY_PORT_TO_END(pcie_port) >> 20), PCIE_PMBL_END_ADDR) ++ | SM((PCIE_MEM_PHY_PORT_TO_BASE(pcie_port) >> 20), PCIE_PMBL_UPPER_12BIT) ++ | PCIE_PMBL_64BIT_ADDR; ++ IFX_REG_W32(reg, PCIE_PMBL(pcie_port)); ++ ++ /* Must configure upper 32bit */ ++ IFX_REG_W32(0, PCIE_PMBU32(pcie_port)); ++ IFX_REG_W32(0, PCIE_PMLU32(pcie_port)); ++#else ++ /* PCIe_PBML, same as MBML */ ++ IFX_REG_W32(IFX_REG_R32(PCIE_MBML(pcie_port)), PCIE_PMBL(pcie_port)); ++#endif ++ ++ /* IO Address Range */ ++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 12), PCIE_IOBLSECS_IO_LIMIT_ADDR) ++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 12), PCIE_IOBLSECS_IO_BASE_ADDR); ++#ifdef IFX_PCIE_IO_32BIT ++ reg |= PCIE_IOBLSECS_32BIT_IO_ADDR; ++#endif /* IFX_PCIE_IO_32BIT */ ++ IFX_REG_W32(reg, PCIE_IOBLSECS(pcie_port)); ++ ++#ifdef IFX_PCIE_IO_32BIT ++ reg = SM((PCIE_IO_PHY_PORT_TO_END(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT) ++ | SM((PCIE_IO_PHY_PORT_TO_BASE(pcie_port) >> 16), PCIE_IO_BANDL_UPPER_16BIT_IO_BASE); ++ IFX_REG_W32(reg, PCIE_IO_BANDL(pcie_port)); ++ ++#endif /* IFX_PCIE_IO_32BIT */ ++} ++ ++static inline void ++pcie_device_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Device capability register, set up Maximum payload size */ ++ reg = IFX_REG_R32(PCIE_DCAP(pcie_port)); ++ reg |= PCIE_DCAP_ROLE_BASE_ERR_REPORT; ++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCAP_MAX_PAYLOAD_SIZE); ++ ++ /* Only available for EP */ ++ reg &= ~(PCIE_DCAP_EP_L0S_LATENCY | PCIE_DCAP_EP_L1_LATENCY); ++ IFX_REG_W32(reg, PCIE_DCAP(pcie_port)); ++ ++ /* Device control and status register */ ++ /* Set Maximum Read Request size for the device as a Requestor */ ++ reg = IFX_REG_R32(PCIE_DCTLSTS(pcie_port)); ++ ++ /* ++ * Request size can be larger than the MPS used, but the completions returned ++ * for the read will be bounded by the MPS size. ++ * In our system, Max request size depends on AHB burst size. It is 64 bytes. ++ * but we set it as 128 as minimum one. ++ */ ++ reg |= SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_READ_SIZE) ++ | SM(PCIE_MAX_PAYLOAD_128, PCIE_DCTLSTS_MAX_PAYLOAD_SIZE); ++ ++ /* Enable relaxed ordering, no snoop, and all kinds of errors */ ++ reg |= PCIE_DCTLSTS_RELAXED_ORDERING_EN | PCIE_DCTLSTS_ERR_EN | PCIE_DCTLSTS_NO_SNOOP_EN; ++ ++ IFX_REG_W32(reg, PCIE_DCTLSTS(pcie_port)); ++} ++ ++static inline void ++pcie_link_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* ++ * XXX, Link capability register, bit 18 for EP CLKREQ# dynamic clock management for L1, L2/3 CPM ++ * L0s is reported during link training via TS1 order set by N_FTS ++ */ ++ reg = IFX_REG_R32(PCIE_LCAP(pcie_port)); ++ reg &= ~PCIE_LCAP_L0S_EIXT_LATENCY; ++ reg |= SM(3, PCIE_LCAP_L0S_EIXT_LATENCY); ++ IFX_REG_W32(reg, PCIE_LCAP(pcie_port)); ++ ++ /* Link control and status register */ ++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); ++ ++ /* Link Enable, ASPM enabled */ ++ reg &= ~PCIE_LCTLSTS_LINK_DISABLE; ++ ++#ifdef CONFIG_PCIEASPM ++ /* ++ * We use the same physical reference clock that the platform provides on the connector ++ * It paved the way for ASPM to calculate the new exit Latency ++ */ ++ reg |= PCIE_LCTLSTS_SLOT_CLK_CFG; ++ reg |= PCIE_LCTLSTS_COM_CLK_CFG; ++ /* ++ * We should disable ASPM by default except that we have dedicated power management support ++ * Enable ASPM will cause the system hangup/instability, performance degration ++ */ ++ reg |= PCIE_LCTLSTS_ASPM_ENABLE; ++#else ++ reg &= ~PCIE_LCTLSTS_ASPM_ENABLE; ++#endif /* CONFIG_PCIEASPM */ ++ ++ /* ++ * The maximum size of any completion with data packet is bounded by the MPS setting ++ * in device control register ++ */ ++ ++ /* RCB may cause multiple split transactions, two options available, we use 64 byte RCB */ ++ reg &= ~ PCIE_LCTLSTS_RCB128; ++ ++ IFX_REG_W32(reg, PCIE_LCTLSTS(pcie_port)); ++} ++ ++static inline void pcie_error_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* ++ * Forward ERR_COR, ERR_NONFATAL, ERR_FATAL to the backbone ++ * Poisoned write TLPs and completions indicating poisoned TLPs will set the PCIe_PCICMDSTS.MDPE ++ */ ++ reg = IFX_REG_R32(PCIE_INTRBCTRL(pcie_port)); ++ reg |= PCIE_INTRBCTRL_SERR_ENABLE | PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE; ++ ++ IFX_REG_W32(reg, PCIE_INTRBCTRL(pcie_port)); ++ ++ /* Uncorrectable Error Mask Register, Unmask <enable> all bits in PCIE_UESR */ ++ reg = IFX_REG_R32(PCIE_UEMR(pcie_port)); ++ reg &= ~PCIE_ALL_UNCORRECTABLE_ERR; ++ IFX_REG_W32(reg, PCIE_UEMR(pcie_port)); ++ ++ /* Uncorrectable Error Severity Register, ALL errors are FATAL */ ++ IFX_REG_W32(PCIE_ALL_UNCORRECTABLE_ERR, PCIE_UESR(pcie_port)); ++ ++ /* Correctable Error Mask Register, unmask <enable> all bits */ ++ reg = IFX_REG_R32(PCIE_CEMR(pcie_port)); ++ reg &= ~PCIE_CORRECTABLE_ERR; ++ IFX_REG_W32(reg, PCIE_CEMR(pcie_port)); ++ ++ /* Advanced Error Capabilities and Control Registr */ ++ reg = IFX_REG_R32(PCIE_AECCR(pcie_port)); ++ reg |= PCIE_AECCR_ECRC_CHECK_EN | PCIE_AECCR_ECRC_GEN_EN; ++ IFX_REG_W32(reg, PCIE_AECCR(pcie_port)); ++ ++ /* Root Error Command Register, Report all types of errors */ ++ reg = IFX_REG_R32(PCIE_RECR(pcie_port)); ++ reg |= PCIE_RECR_ERR_REPORT_EN; ++ IFX_REG_W32(reg, PCIE_RECR(pcie_port)); ++ ++ /* Clear the Root status register */ ++ reg = IFX_REG_R32(PCIE_RESR(pcie_port)); ++ IFX_REG_W32(reg, PCIE_RESR(pcie_port)); ++} ++ ++static inline void pcie_port_logic_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* FTS number, default 12, increase to 63, may increase time from/to L0s to L0 */ ++ reg = IFX_REG_R32(PCIE_AFR(pcie_port)); ++ reg &= ~(PCIE_AFR_FTS_NUM | PCIE_AFR_COM_FTS_NUM); ++ reg |= SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_FTS_NUM) ++ | SM(PCIE_AFR_FTS_NUM_DEFAULT, PCIE_AFR_COM_FTS_NUM); ++ /* L0s and L1 entry latency */ ++ reg &= ~(PCIE_AFR_L0S_ENTRY_LATENCY | PCIE_AFR_L1_ENTRY_LATENCY); ++ reg |= SM(PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L0S_ENTRY_LATENCY) ++ | SM(PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT, PCIE_AFR_L1_ENTRY_LATENCY); ++ IFX_REG_W32(reg, PCIE_AFR(pcie_port)); ++ ++ ++ /* Port Link Control Register */ ++ reg = IFX_REG_R32(PCIE_PLCR(pcie_port)); ++ reg |= PCIE_PLCR_DLL_LINK_EN; /* Enable the DLL link */ ++ IFX_REG_W32(reg, PCIE_PLCR(pcie_port)); ++ ++ /* Lane Skew Register */ ++ reg = IFX_REG_R32(PCIE_LSR(pcie_port)); ++ /* Enable ACK/NACK and FC */ ++ reg &= ~(PCIE_LSR_ACKNAK_DISABLE | PCIE_LSR_FC_DISABLE); ++ IFX_REG_W32(reg, PCIE_LSR(pcie_port)); ++ ++ /* Symbol Timer Register and Filter Mask Register 1 */ ++ reg = IFX_REG_R32(PCIE_STRFMR(pcie_port)); ++ ++ /* Default SKP interval is very accurate already, 5us */ ++ /* Enable IO/CFG transaction */ ++ reg |= PCIE_STRFMR_RX_CFG_TRANS_ENABLE | PCIE_STRFMR_RX_IO_TRANS_ENABLE; ++ /* Disable FC WDT */ ++ reg &= ~PCIE_STRFMR_FC_WDT_DISABLE; ++ IFX_REG_W32(reg, PCIE_STRFMR(pcie_port)); ++ ++ /* Filter Masker Register 2 */ ++ reg = IFX_REG_R32(PCIE_FMR2(pcie_port)); ++ reg |= PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 | PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1; ++ IFX_REG_W32(reg, PCIE_FMR2(pcie_port)); ++ ++ /* VC0 Completion Receive Queue Control Register */ ++ reg = IFX_REG_R32(PCIE_VC0_CRQCR(pcie_port)); ++ reg &= ~PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE; ++ reg |= SM(PCIE_VC0_TLP_QUEUE_MODE_BYPASS, PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE); ++ IFX_REG_W32(reg, PCIE_VC0_CRQCR(pcie_port)); ++} ++ ++static inline void pcie_rc_cfg_reg_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Disable LTSSM */ ++ IFX_REG_W32(0, PCIE_RC_CCR(pcie_port)); /* Disable LTSSM */ ++ ++ pcie_mem_io_setup(pcie_port); ++ ++ /* XXX, MSI stuff should only apply to EP */ ++ /* MSI Capability: Only enable 32-bit addresses */ ++ reg = IFX_REG_R32(PCIE_MCAPR(pcie_port)); ++ reg &= ~PCIE_MCAPR_ADDR64_CAP; ++ ++ reg |= PCIE_MCAPR_MSI_ENABLE; ++ ++ /* Disable multiple message */ ++ reg &= ~(PCIE_MCAPR_MULTI_MSG_CAP | PCIE_MCAPR_MULTI_MSG_ENABLE); ++ IFX_REG_W32(reg, PCIE_MCAPR(pcie_port)); ++ ++ ++ /* Enable PME, Soft reset enabled */ ++ reg = IFX_REG_R32(PCIE_PM_CSR(pcie_port)); ++ reg |= PCIE_PM_CSR_PME_ENABLE | PCIE_PM_CSR_SW_RST; ++ IFX_REG_W32(reg, PCIE_PM_CSR(pcie_port)); ++ ++ /* setup the bus */ ++ reg = SM(0, PCIE_BNR_PRIMARY_BUS_NUM) | SM(1, PCIE_PNR_SECONDARY_BUS_NUM) | SM(0xFF, PCIE_PNR_SUB_BUS_NUM); ++ IFX_REG_W32(reg, PCIE_BNR(pcie_port)); ++ ++ ++ pcie_device_setup(pcie_port); ++ pcie_link_setup(pcie_port); ++ pcie_error_setup(pcie_port); ++ ++ /* Root control and capabilities register */ ++ reg = IFX_REG_R32(PCIE_RCTLCAP(pcie_port)); ++ reg |= PCIE_RCTLCAP_SERR_ENABLE | PCIE_RCTLCAP_PME_INT_EN; ++ IFX_REG_W32(reg, PCIE_RCTLCAP(pcie_port)); ++ ++ /* Port VC Capability Register 2 */ ++ reg = IFX_REG_R32(PCIE_PVC2(pcie_port)); ++ reg &= ~PCIE_PVC2_VC_ARB_WRR; ++ reg |= PCIE_PVC2_VC_ARB_16P_FIXED_WRR; ++ IFX_REG_W32(reg, PCIE_PVC2(pcie_port)); ++ ++ /* VC0 Resource Capability Register */ ++ reg = IFX_REG_R32(PCIE_VC0_RC(pcie_port)); ++ reg &= ~PCIE_VC0_RC_REJECT_SNOOP; ++ IFX_REG_W32(reg, PCIE_VC0_RC(pcie_port)); ++ ++ pcie_port_logic_setup(pcie_port); ++} ++ ++static int ifx_pcie_wait_phy_link_up(int pcie_port) ++{ ++#define IFX_PCIE_PHY_LINK_UP_TIMEOUT 1000 /* XXX, tunable */ ++ int i; ++ ++ /* Wait for PHY link is up */ ++ for (i = 0; i < IFX_PCIE_PHY_LINK_UP_TIMEOUT; i++) { ++ if (ifx_pcie_link_up(pcie_port)) { ++ break; ++ } ++ udelay(100); ++ } ++ if (i >= IFX_PCIE_PHY_LINK_UP_TIMEOUT) { ++ printk(KERN_ERR "%s timeout\n", __func__); ++ return -1; ++ } ++ ++ /* Check data link up or not */ ++ if (!(IFX_REG_R32(PCIE_RC_DR(pcie_port)) & PCIE_RC_DR_DLL_UP)) { ++ printk(KERN_ERR "%s DLL link is still down\n", __func__); ++ return -1; ++ } ++ ++ /* Check Data link active or not */ ++ if (!(IFX_REG_R32(PCIE_LCTLSTS(pcie_port)) & PCIE_LCTLSTS_DLL_ACTIVE)) { ++ printk(KERN_ERR "%s DLL is not active\n", __func__); ++ return -1; ++ } ++ return 0; ++} ++ ++static inline int pcie_app_loigc_setup(int pcie_port) ++{ ++ /* supress ahb bus errrors */ ++ IFX_REG_W32(PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS, PCIE_AHB_CTRL(pcie_port)); ++ ++ /* Pull PCIe EP out of reset */ ++ pcie_device_rst_deassert(pcie_port); ++ ++ /* Start LTSSM training between RC and EP */ ++ pcie_ltssm_enable(pcie_port); ++ ++ /* Check PHY status after enabling LTSSM */ ++ if (ifx_pcie_wait_phy_link_up(pcie_port) != 0) ++ return -1; ++ ++ return 0; ++} ++ ++/* ++ * The numbers below are directly from the PCIe spec table 3-4/5. ++ */ ++static inline void pcie_replay_time_update(int pcie_port) ++{ ++ u32 reg; ++ int nlw; ++ int rtl; ++ ++ reg = IFX_REG_R32(PCIE_LCTLSTS(pcie_port)); ++ ++ nlw = MS(reg, PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH); ++ switch (nlw) { ++ case PCIE_MAX_LENGTH_WIDTH_X1: ++ rtl = 1677; ++ break; ++ case PCIE_MAX_LENGTH_WIDTH_X2: ++ rtl = 867; ++ break; ++ case PCIE_MAX_LENGTH_WIDTH_X4: ++ rtl = 462; ++ break; ++ case PCIE_MAX_LENGTH_WIDTH_X8: ++ rtl = 258; ++ break; ++ default: ++ rtl = 1677; ++ break; ++ } ++ reg = IFX_REG_R32(PCIE_ALTRT(pcie_port)); ++ reg &= ~PCIE_ALTRT_REPLAY_TIME_LIMIT; ++ reg |= SM(rtl, PCIE_ALTRT_REPLAY_TIME_LIMIT); ++ IFX_REG_W32(reg, PCIE_ALTRT(pcie_port)); ++} ++ ++/* ++ * Table 359 Enhanced Configuration Address Mapping1) ++ * 1) This table is defined in Table 7-1, page 341, PCI Express Base Specification v1.1 ++ * Memory Address PCI Express Configuration Space ++ * A[(20+n-1):20] Bus Number 1 < n < 8 ++ * A[19:15] Device Number ++ * A[14:12] Function Number ++ * A[11:8] Extended Register Number ++ * A[7:2] Register Number ++ * A[1:0] Along with size of the access, used to generate Byte Enables ++ * For VR9, only the address bits [22:0] are mapped to the configuration space: ++ * . Address bits [22:20] select the target bus (1-of-8)1) ++ * . Address bits [19:15] select the target device (1-of-32) on the bus ++ * . Address bits [14:12] select the target function (1-of-8) within the device. ++ * . Address bits [11:2] selects the target dword (1-of-1024) within the selected function.s configuration space ++ * . Address bits [1:0] define the start byte location within the selected dword. ++ */ ++static inline u32 pcie_bus_addr(u8 bus_num, u16 devfn, int where) ++{ ++ u32 addr; ++ u8 bus; ++ ++ if (!bus_num) { ++ /* type 0 */ ++ addr = ((PCI_SLOT(devfn) & 0x1F) << 15) | ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF)& ~3); ++ } else { ++ bus = bus_num; ++ /* type 1, only support 8 buses */ ++ addr = ((bus & 0x7) << 20) | ((PCI_SLOT(devfn) & 0x1F) << 15) | ++ ((PCI_FUNC(devfn) & 0x7) << 12) | ((where & 0xFFF) & ~3); ++ } ++ return addr; ++} ++ ++static int pcie_valid_config(int pcie_port, int bus, int dev) ++{ ++ /* RC itself */ ++ if ((bus == 0) && (dev == 0)) { ++ return 1; ++ } ++ ++ /* No physical link */ ++ if (!ifx_pcie_link_up(pcie_port)) { ++ return 0; ++ } ++ ++ /* Bus zero only has RC itself ++ * XXX, check if EP will be integrated ++ */ ++ if ((bus == 0) && (dev != 0)) { ++ return 0; ++ } ++ ++ /* Maximum 8 buses supported for VRX */ ++ if (bus > 9) { ++ return 0; ++ } ++ ++ /* ++ * PCIe is PtP link, one bus only supports only one device ++ * except bus zero and PCIe switch which is virtual bus device ++ * The following two conditions really depends on the system design ++ * and attached the device. ++ * XXX, how about more new switch ++ */ ++ if ((bus == 1) && (dev != 0)) { ++ return 0; ++ } ++ ++ if ((bus >= 3) && (dev != 0)) { ++ return 0; ++ } ++ return 1; ++} ++ ++static inline u32 ifx_pcie_cfg_rd(int pcie_port, u32 reg) ++{ ++ return IFX_REG_R32((volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++static inline void ifx_pcie_cfg_wr(int pcie_port, unsigned int reg, u32 val) ++{ ++ IFX_REG_W32( val, (volatile u32 *)(PCIE_CFG_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++static inline u32 ifx_pcie_rc_cfg_rd(int pcie_port, u32 reg) ++{ ++ return IFX_REG_R32((volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++static inline void ifx_pcie_rc_cfg_wr(int pcie_port, unsigned int reg, u32 val) ++{ ++ IFX_REG_W32(val, (volatile u32 *)(PCIE_RC_PORT_TO_BASE(pcie_port) + reg)); ++} ++ ++u32 ifx_pcie_bus_enum_read_hack(int where, u32 value) ++{ ++ u32 tvalue = value; ++ ++ if (where == PCI_PRIMARY_BUS) { ++ u8 primary, secondary, subordinate; ++ ++ primary = tvalue & 0xFF; ++ secondary = (tvalue >> 8) & 0xFF; ++ subordinate = (tvalue >> 16) & 0xFF; ++ primary += pcibios_1st_host_bus_nr(); ++ secondary += pcibios_1st_host_bus_nr(); ++ subordinate += pcibios_1st_host_bus_nr(); ++ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); ++ } ++ return tvalue; ++} ++ ++u32 ifx_pcie_bus_enum_write_hack(int where, u32 value) ++{ ++ u32 tvalue = value; ++ ++ if (where == PCI_PRIMARY_BUS) { ++ u8 primary, secondary, subordinate; ++ ++ primary = tvalue & 0xFF; ++ secondary = (tvalue >> 8) & 0xFF; ++ subordinate = (tvalue >> 16) & 0xFF; ++ if (primary > 0 && primary != 0xFF) { ++ primary -= pcibios_1st_host_bus_nr(); ++ } ++ ++ if (secondary > 0 && secondary != 0xFF) { ++ secondary -= pcibios_1st_host_bus_nr(); ++ } ++ if (subordinate > 0 && subordinate != 0xFF) { ++ subordinate -= pcibios_1st_host_bus_nr(); ++ } ++ tvalue = (tvalue & 0xFF000000) | (u32)primary | (u32)(secondary << 8) | (u32)(subordinate << 16); ++ } ++ else if (where == PCI_SUBORDINATE_BUS) { ++ u8 subordinate = tvalue & 0xFF; ++ ++ subordinate = subordinate > 0 ? subordinate - pcibios_1st_host_bus_nr() : 0; ++ tvalue = subordinate; ++ } ++ return tvalue; ++} ++ ++static int ifx_pcie_read_config(struct pci_bus *bus, u32 devfn, ++ int where, int size, u32 *value) ++{ ++ u32 data = 0; ++ int bus_number = bus->number; ++ static const u32 mask[8] = {0, 0xff, 0xffff, 0, 0xffffffff, 0, 0, 0}; ++ int ret = PCIBIOS_SUCCESSFUL; ++ struct ifx_pci_controller *ctrl = bus->sysdata; ++ int pcie_port = ctrl->port; ++ ++ if (unlikely(size != 1 && size != 2 && size != 4)){ ++ ret = PCIBIOS_BAD_REGISTER_NUMBER; ++ goto out; ++ } ++ ++ /* Make sure the address is aligned to natural boundary */ ++ if (unlikely(((size - 1) & where))) { ++ ret = PCIBIOS_BAD_REGISTER_NUMBER; ++ goto out; ++ } ++ ++ /* ++ * If we are second controller, we have to cheat OS so that it assume ++ * its bus number starts from 0 in host controller ++ */ ++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); ++ ++ /* ++ * We need to force the bus number to be zero on the root ++ * bus. Linux numbers the 2nd root bus to start after all ++ * busses on root 0. ++ */ ++ if (bus->parent == NULL) { ++ bus_number = 0; ++ } ++ ++ /* ++ * PCIe only has a single device connected to it. It is ++ * always device ID 0. Don't bother doing reads for other ++ * device IDs on the first segment. ++ */ ++ if ((bus_number == 0) && (PCI_SLOT(devfn) != 0)) { ++ ret = PCIBIOS_FUNC_NOT_SUPPORTED; ++ goto out; ++ } ++ ++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { ++ *value = 0xffffffff; ++ ret = PCIBIOS_DEVICE_NOT_FOUND; ++ goto out; ++ } ++ ++ PCIE_IRQ_LOCK(ifx_pcie_lock); ++ if (bus_number == 0) { /* RC itself */ ++ u32 t; ++ ++ t = (where & ~3); ++ data = ifx_pcie_rc_cfg_rd(pcie_port, t); ++ } else { ++ u32 addr = pcie_bus_addr(bus_number, devfn, where); ++ ++ data = ifx_pcie_cfg_rd(pcie_port, addr); ++ #ifdef CONFIG_IFX_PCIE_HW_SWAP ++ data = le32_to_cpu(data); ++ #endif /* CONFIG_IFX_PCIE_HW_SWAP */ ++ } ++ /* To get a correct PCI topology, we have to restore the bus number to OS */ ++ data = ifx_pcie_bus_enum_hack(bus, devfn, where, data, pcie_port, 1); ++ ++ PCIE_IRQ_UNLOCK(ifx_pcie_lock); ++ ++ *value = (data >> (8 * (where & 3))) & mask[size & 7]; ++out: ++ return ret; ++} ++ ++static u32 ifx_pcie_size_to_value(int where, int size, u32 data, u32 value) ++{ ++ u32 shift; ++ u32 tdata = data; ++ ++ switch (size) { ++ case 1: ++ shift = (where & 0x3) << 3; ++ tdata &= ~(0xffU << shift); ++ tdata |= ((value & 0xffU) << shift); ++ break; ++ case 2: ++ shift = (where & 3) << 3; ++ tdata &= ~(0xffffU << shift); ++ tdata |= ((value & 0xffffU) << shift); ++ break; ++ case 4: ++ tdata = value; ++ break; ++ } ++ return tdata; ++} ++ ++static int ifx_pcie_write_config(struct pci_bus *bus, u32 devfn, ++ int where, int size, u32 value) ++{ ++ int bus_number = bus->number; ++ int ret = PCIBIOS_SUCCESSFUL; ++ struct ifx_pci_controller *ctrl = bus->sysdata; ++ int pcie_port = ctrl->port; ++ u32 tvalue = value; ++ u32 data; ++ ++ /* Make sure the address is aligned to natural boundary */ ++ if (unlikely(((size - 1) & where))) { ++ ret = PCIBIOS_BAD_REGISTER_NUMBER; ++ goto out; ++ } ++ /* ++ * If we are second controller, we have to cheat OS so that it assume ++ * its bus number starts from 0 in host controller ++ */ ++ bus_number = ifx_pcie_bus_nr_deduct(bus_number, pcie_port); ++ ++ /* ++ * We need to force the bus number to be zero on the root ++ * bus. Linux numbers the 2nd root bus to start after all ++ * busses on root 0. ++ */ ++ if (bus->parent == NULL) { ++ bus_number = 0; ++ } ++ ++ if (pcie_valid_config(pcie_port, bus_number, PCI_SLOT(devfn)) == 0) { ++ ret = PCIBIOS_DEVICE_NOT_FOUND; ++ goto out; ++ } ++ ++ /* XXX, some PCIe device may need some delay */ ++ PCIE_IRQ_LOCK(ifx_pcie_lock); ++ ++ /* ++ * To configure the correct bus topology using native way, we have to cheat Os so that ++ * it can configure the PCIe hardware correctly. ++ */ ++ tvalue = ifx_pcie_bus_enum_hack(bus, devfn, where, value, pcie_port, 0); ++ ++ if (bus_number == 0) { /* RC itself */ ++ u32 t; ++ ++ t = (where & ~3); ++ data = ifx_pcie_rc_cfg_rd(pcie_port, t); ++ ++ data = ifx_pcie_size_to_value(where, size, data, tvalue); ++ ++ ifx_pcie_rc_cfg_wr(pcie_port, t, data); ++ } else { ++ u32 addr = pcie_bus_addr(bus_number, devfn, where); ++ ++ data = ifx_pcie_cfg_rd(pcie_port, addr); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ data = le32_to_cpu(data); ++#endif ++ ++ data = ifx_pcie_size_to_value(where, size, data, tvalue); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ data = cpu_to_le32(data); ++#endif ++ ifx_pcie_cfg_wr(pcie_port, addr, data); ++ } ++ PCIE_IRQ_UNLOCK(ifx_pcie_lock); ++out: ++ return ret; ++} ++ ++static struct resource ifx_pcie_io_resource = { ++ .name = "PCIe0 I/O space", ++ .start = PCIE_IO_PHY_BASE, ++ .end = PCIE_IO_PHY_END, ++ .flags = IORESOURCE_IO, ++}; ++ ++static struct resource ifx_pcie_mem_resource = { ++ .name = "PCIe0 Memory space", ++ .start = PCIE_MEM_PHY_BASE, ++ .end = PCIE_MEM_PHY_END, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct pci_ops ifx_pcie_ops = { ++ .read = ifx_pcie_read_config, ++ .write = ifx_pcie_write_config, ++}; ++ ++static struct ifx_pci_controller ifx_pcie_controller[IFX_PCIE_CORE_NR] = { ++ { ++ .pcic = { ++ .pci_ops = &ifx_pcie_ops, ++ .mem_resource = &ifx_pcie_mem_resource, ++ .io_resource = &ifx_pcie_io_resource, ++ }, ++ .port = IFX_PCIE_PORT0, ++ }, ++}; ++ ++#ifdef IFX_PCIE_ERROR_INT ++ ++static irqreturn_t pcie_rc_core_isr(int irq, void *dev_id) ++{ ++ struct ifx_pci_controller *ctrl = (struct ifx_pci_controller *)dev_id; ++ int pcie_port = ctrl->port; ++ u32 reg; ++ ++ pr_debug("PCIe RC error intr %d\n", irq); ++ reg = IFX_REG_R32(PCIE_IRNCR(pcie_port)); ++ reg &= PCIE_RC_CORE_COMBINED_INT; ++ IFX_REG_W32(reg, PCIE_IRNCR(pcie_port)); ++ ++ return IRQ_HANDLED; ++} ++ ++static int ++pcie_rc_core_int_init(int pcie_port) ++{ ++ int ret; ++ ++ /* Enable core interrupt */ ++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNEN(pcie_port)); ++ ++ /* Clear it first */ ++ IFX_REG_SET_BIT(PCIE_RC_CORE_COMBINED_INT, PCIE_IRNCR(pcie_port)); ++ ret = request_irq(pcie_irqs[pcie_port].ir_irq.irq, pcie_rc_core_isr, 0, ++ pcie_irqs[pcie_port].ir_irq.name, &ifx_pcie_controller[pcie_port]); ++ if (ret) ++ printk(KERN_ERR "%s request irq %d failed\n", __func__, IFX_PCIE_IR); ++ ++ return ret; ++} ++#endif ++ ++int ifx_pcie_bios_map_irq(IFX_PCI_CONST struct pci_dev *dev, u8 slot, u8 pin) ++{ ++ u32 irq_bit = 0; ++ int irq = 0; ++ struct ifx_pci_controller *ctrl = dev->bus->sysdata; ++ int pcie_port = ctrl->port; ++ ++ printk("%s port %d dev %s slot %d pin %d \n", __func__, pcie_port, pci_name(dev), slot, pin); ++ ++ if ((pin == PCIE_LEGACY_DISABLE) || (pin > PCIE_LEGACY_INT_MAX)) { ++ printk(KERN_WARNING "WARNING: dev %s: invalid interrupt pin %d\n", pci_name(dev), pin); ++ return -1; ++ } ++ ++ /* Pin index so minus one */ ++ irq_bit = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq_bit; ++ irq = pcie_irqs[pcie_port].legacy_irq[pin - 1].irq; ++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNEN(pcie_port)); ++ IFX_REG_SET_BIT(irq_bit, PCIE_IRNCR(pcie_port)); ++ printk("%s dev %s irq %d assigned\n", __func__, pci_name(dev), irq); ++ return irq; ++} ++ ++int ifx_pcie_bios_plat_dev_init(struct pci_dev *dev) ++{ ++ u16 config; ++#ifdef IFX_PCIE_ERROR_INT ++ u32 dconfig; ++ int pos; ++#endif ++ ++ /* Enable reporting System errors and parity errors on all devices */ ++ /* Enable parity checking and error reporting */ ++ pci_read_config_word(dev, PCI_COMMAND, &config); ++ config |= PCI_COMMAND_PARITY | PCI_COMMAND_SERR /*| PCI_COMMAND_INVALIDATE | ++ PCI_COMMAND_FAST_BACK*/; ++ pci_write_config_word(dev, PCI_COMMAND, config); ++ ++ if (dev->subordinate) { ++ /* Set latency timers on sub bridges */ ++ pci_write_config_byte(dev, PCI_SEC_LATENCY_TIMER, 0x40); /* XXX, */ ++ /* More bridge error detection */ ++ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &config); ++ config |= PCI_BRIDGE_CTL_PARITY | PCI_BRIDGE_CTL_SERR; ++ pci_write_config_word(dev, PCI_BRIDGE_CONTROL, config); ++ } ++#ifdef IFX_PCIE_ERROR_INT ++ /* Enable the PCIe normal error reporting */ ++ pos = pci_find_capability(dev, PCI_CAP_ID_EXP); ++ if (pos) { ++ ++ /* Disable system error generation in response to error messages */ ++ pci_read_config_word(dev, pos + PCI_EXP_RTCTL, &config); ++ config &= ~(PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | PCI_EXP_RTCTL_SEFEE); ++ pci_write_config_word(dev, pos + PCI_EXP_RTCTL, config); ++ ++ /* Clear PCIE Capability's Device Status */ ++ pci_read_config_word(dev, pos + PCI_EXP_DEVSTA, &config); ++ pci_write_config_word(dev, pos + PCI_EXP_DEVSTA, config); ++ ++ /* Update Device Control */ ++ pci_read_config_word(dev, pos + PCI_EXP_DEVCTL, &config); ++ /* Correctable Error Reporting */ ++ config |= PCI_EXP_DEVCTL_CERE; ++ /* Non-Fatal Error Reporting */ ++ config |= PCI_EXP_DEVCTL_NFERE; ++ /* Fatal Error Reporting */ ++ config |= PCI_EXP_DEVCTL_FERE; ++ /* Unsupported Request */ ++ config |= PCI_EXP_DEVCTL_URRE; ++ pci_write_config_word(dev, pos + PCI_EXP_DEVCTL, config); ++ } ++ ++ /* Find the Advanced Error Reporting capability */ ++ pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR); ++ if (pos) { ++ /* Clear Uncorrectable Error Status */ ++ pci_read_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, &dconfig); ++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_STATUS, dconfig); ++ /* Enable reporting of all uncorrectable errors */ ++ /* Uncorrectable Error Mask - turned on bits disable errors */ ++ pci_write_config_dword(dev, pos + PCI_ERR_UNCOR_MASK, 0); ++ /* ++ * Leave severity at HW default. This only controls if ++ * errors are reported as uncorrectable or ++ * correctable, not if the error is reported. ++ */ ++ /* PCI_ERR_UNCOR_SEVER - Uncorrectable Error Severity */ ++ /* Clear Correctable Error Status */ ++ pci_read_config_dword(dev, pos + PCI_ERR_COR_STATUS, &dconfig); ++ pci_write_config_dword(dev, pos + PCI_ERR_COR_STATUS, dconfig); ++ /* Enable reporting of all correctable errors */ ++ /* Correctable Error Mask - turned on bits disable errors */ ++ pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, 0); ++ /* Advanced Error Capabilities */ ++ pci_read_config_dword(dev, pos + PCI_ERR_CAP, &dconfig); ++ /* ECRC Generation Enable */ ++ if (dconfig & PCI_ERR_CAP_ECRC_GENC) { ++ dconfig |= PCI_ERR_CAP_ECRC_GENE; ++ } ++ /* ECRC Check Enable */ ++ if (dconfig & PCI_ERR_CAP_ECRC_CHKC) { ++ dconfig |= PCI_ERR_CAP_ECRC_CHKE; ++ } ++ pci_write_config_dword(dev, pos + PCI_ERR_CAP, dconfig); ++ ++ /* PCI_ERR_HEADER_LOG - Header Log Register (16 bytes) */ ++ /* Enable Root Port's interrupt in response to error messages */ ++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_COMMAND, ++ PCI_ERR_ROOT_CMD_COR_EN | ++ PCI_ERR_ROOT_CMD_NONFATAL_EN | ++ PCI_ERR_ROOT_CMD_FATAL_EN); ++ /* Clear the Root status register */ ++ pci_read_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, &dconfig); ++ pci_write_config_dword(dev, pos + PCI_ERR_ROOT_STATUS, dconfig); ++ } ++#endif /* IFX_PCIE_ERROR_INT */ ++ /* WAR, only 128 MRRS is supported, force all EPs to support this value */ ++ pcie_set_readrq(dev, 128); ++ return 0; ++} ++ ++static int ++pcie_rc_initialize(int pcie_port) ++{ ++ int i; ++#define IFX_PCIE_PHY_LOOP_CNT 5 ++ ++ pcie_rcu_endian_setup(pcie_port); ++ ++ pcie_ep_gpio_rst_init(pcie_port); ++ ++ /* ++ * XXX, PCIe elastic buffer bug will cause not to be detected. One more ++ * reset PCIe PHY will solve this issue ++ */ ++ for (i = 0; i < IFX_PCIE_PHY_LOOP_CNT; i++) { ++ /* Disable PCIe PHY Analog part for sanity check */ ++ pcie_phy_pmu_disable(pcie_port); ++ ++ pcie_phy_rst_assert(pcie_port); ++ pcie_phy_rst_deassert(pcie_port); ++ ++ /* Make sure PHY PLL is stable */ ++ udelay(20); ++ ++ /* PCIe Core reset enabled, low active, sw programmed */ ++ pcie_core_rst_assert(pcie_port); ++ ++ /* Put PCIe EP in reset status */ ++ pcie_device_rst_assert(pcie_port); ++ ++ /* PCI PHY & Core reset disabled, high active, sw programmed */ ++ pcie_core_rst_deassert(pcie_port); ++ ++ /* Already in a quiet state, program PLL, enable PHY, check ready bit */ ++ pcie_phy_clock_mode_setup(pcie_port); ++ ++ /* Enable PCIe PHY and Clock */ ++ pcie_core_pmu_setup(pcie_port); ++ ++ /* Clear status registers */ ++ pcie_status_register_clear(pcie_port); ++ ++#ifdef CONFIG_PCI_MSI ++ pcie_msi_init(pcie_port); ++#endif /* CONFIG_PCI_MSI */ ++ pcie_rc_cfg_reg_setup(pcie_port); ++ ++ /* Once link is up, break out */ ++ if (pcie_app_loigc_setup(pcie_port) == 0) ++ break; ++ } ++ if (i >= IFX_PCIE_PHY_LOOP_CNT) { ++ printk(KERN_ERR "%s link up failed!!!!!\n", __func__); ++ return -EIO; ++ } ++ /* NB, don't increase ACK/NACK timer timeout value, which will cause a lot of COR errors */ ++ pcie_replay_time_update(pcie_port); ++ return 0; ++} ++ ++static int __init ifx_pcie_bios_init(void) ++{ ++ void __iomem *io_map_base; ++ int pcie_port; ++ int startup_port; ++ ++ /* Enable AHB Master/ Slave */ ++ pcie_ahb_pmu_setup(); ++ ++ startup_port = IFX_PCIE_PORT0; ++ ++ for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ ++ if (pcie_rc_initialize(pcie_port) == 0) { ++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", ++ __func__, PCIE_CFG_PORT_TO_BASE(pcie_port)); ++ /* Otherwise, warning will pop up */ ++ io_map_base = ioremap(PCIE_IO_PHY_PORT_TO_BASE(pcie_port), PCIE_IO_SIZE); ++ if (io_map_base == NULL) { ++ IFX_PCIE_PRINT(PCIE_MSG_ERR, "%s io space ioremap failed\n", __func__); ++ return -ENOMEM; ++ } ++ ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; ++ ++ register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); ++ /* XXX, clear error status */ ++ ++ IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: mem_resource 0x%p, io_resource 0x%p\n", ++ __func__, &ifx_pcie_controller[pcie_port].pcic.mem_resource, ++ &ifx_pcie_controller[pcie_port].pcic.io_resource); ++ ++ #ifdef IFX_PCIE_ERROR_INT ++ pcie_rc_core_int_init(pcie_port); ++ #endif /* IFX_PCIE_ERROR_INT */ ++ } ++ } ++ ++ return 0; ++} ++arch_initcall(ifx_pcie_bios_init); ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); ++MODULE_SUPPORTED_DEVICE("Infineon builtin PCIe RC module"); ++MODULE_DESCRIPTION("Infineon builtin PCIe RC driver"); ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie.h +@@ -0,0 +1,135 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie.h ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++#ifndef IFXMIPS_PCIE_H ++#define IFXMIPS_PCIE_H ++#include <linux/version.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/interrupt.h> ++#include "ifxmips_pci_common.h" ++#include "ifxmips_pcie_reg.h" ++ ++/*! ++ \defgroup IFX_PCIE PCI Express bus driver module ++ \brief PCI Express IP module support VRX200 ++*/ ++ ++/*! ++ \defgroup IFX_PCIE_OS OS APIs ++ \ingroup IFX_PCIE ++ \brief PCIe bus driver OS interface functions ++*/ ++ ++/*! ++ \file ifxmips_pcie.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe module common header file ++*/ ++#define PCIE_IRQ_LOCK(lock) do { \ ++ unsigned long flags; \ ++ spin_lock_irqsave(&(lock), flags); ++#define PCIE_IRQ_UNLOCK(lock) \ ++ spin_unlock_irqrestore(&(lock), flags); \ ++} while (0) ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++#define IRQF_SHARED SA_SHIRQ ++#endif ++ ++#define PCIE_MSG_MSI 0x00000001 ++#define PCIE_MSG_ISR 0x00000002 ++#define PCIE_MSG_FIXUP 0x00000004 ++#define PCIE_MSG_READ_CFG 0x00000008 ++#define PCIE_MSG_WRITE_CFG 0x00000010 ++#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) ++#define PCIE_MSG_REG 0x00000020 ++#define PCIE_MSG_INIT 0x00000040 ++#define PCIE_MSG_ERR 0x00000080 ++#define PCIE_MSG_PHY 0x00000100 ++#define PCIE_MSG_ANY 0x000001ff ++ ++#define IFX_PCIE_PORT0 0 ++#define IFX_PCIE_PORT1 1 ++ ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++#define IFX_PCIE_CORE_NR 2 ++#else ++#define IFX_PCIE_CORE_NR 1 ++#endif ++ ++#define IFX_PCIE_ERROR_INT ++ ++//#define IFX_PCIE_DBG ++ ++#if defined(IFX_PCIE_DBG) ++#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ ++ ifx_pcie_debug((_fmt), ##args); \ ++} while (0) ++ ++#define INLINE ++#else ++#define IFX_PCIE_PRINT(_m, _fmt, args...) \ ++ do {} while(0) ++#define INLINE inline ++#endif ++ ++struct ifx_pci_controller { ++ struct pci_controller pcic; ++ ++ /* RC specific, per host bus information */ ++ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ ++}; ++ ++typedef struct ifx_pcie_ir_irq { ++ const unsigned int irq; ++ const char name[16]; ++}ifx_pcie_ir_irq_t; ++ ++typedef struct ifx_pcie_legacy_irq{ ++ const u32 irq_bit; ++ const int irq; ++}ifx_pcie_legacy_irq_t; ++ ++typedef struct ifx_pcie_irq { ++ ifx_pcie_ir_irq_t ir_irq; ++ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; ++}ifx_pcie_irq_t; ++ ++extern u32 g_pcie_debug_flag; ++extern void ifx_pcie_debug(const char *fmt, ...); ++extern void pcie_phy_clock_mode_setup(int pcie_port); ++extern void pcie_msi_pic_init(int pcie_port); ++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); ++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); ++ ++#define CONFIG_VR9 ++ ++#ifdef CONFIG_VR9 ++#include "ifxmips_pcie_vr9.h" ++#elif defined (CONFIG_AR10) ++#include "ifxmips_pcie_ar10.h" ++#else ++#error "PCIE: platform not defined" ++#endif /* CONFIG_VR9 */ ++ ++#endif /* IFXMIPS_PCIE_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_ar10.h +@@ -0,0 +1,290 @@ ++/**************************************************************************** ++ Copyright (c) 2010 ++ Lantiq Deutschland GmbH ++ Am Campeon 3; 85579 Neubiberg, Germany ++ ++ For licensing information, see the file 'LICENSE' in the root folder of ++ this software module. ++ ++ *****************************************************************************/ ++/*! ++ \file ifxmips_pcie_ar10.h ++ \ingroup IFX_PCIE ++ \brief PCIe RC driver ar10 specific file ++*/ ++ ++#ifndef IFXMIPS_PCIE_AR10_H ++#define IFXMIPS_PCIE_AR10_H ++#ifndef AUTOCONF_INCLUDED ++#include <linux/config.h> ++#endif /* AUTOCONF_INCLUDED */ ++#include <linux/types.h> ++#include <linux/delay.h> ++ ++/* Project header file */ ++#include <asm/ifx/ifx_types.h> ++#include <asm/ifx/ifx_pmu.h> ++#include <asm/ifx/ifx_gpio.h> ++#include <asm/ifx/ifx_ebu_led.h> ++ ++static inline void pcie_ep_gpio_rst_init(int pcie_port) ++{ ++ ifx_ebu_led_enable(); ++ if (pcie_port == 0) { ++ ifx_ebu_led_set_data(11, 1); ++ } ++ else { ++ ifx_ebu_led_set_data(12, 1); ++ } ++} ++ ++static inline void pcie_ahb_pmu_setup(void) ++{ ++ /* XXX, moved to CGU to control AHBM */ ++} ++ ++static inline void pcie_rcu_endian_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++ /* Inbound, big endian */ ++ reg |= IFX_RCU_BE_AHB4S; ++ if (pcie_port == 0) { ++ reg |= IFX_RCU_BE_PCIE0M; ++ ++ #ifdef CONFIG_IFX_PCIE_HW_SWAP ++ /* Outbound, software swap needed */ ++ reg |= IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE0S; ++ #else ++ /* Outbound little endian */ ++ reg &= ~IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE0S; ++ #endif ++ } ++ else { ++ reg |= IFX_RCU_BE_PCIE1M; ++ #ifdef CONFIG_IFX_PCIE1_HW_SWAP ++ /* Outbound, software swap needed */ ++ reg |= IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE1S; ++ #else ++ /* Outbound little endian */ ++ reg &= ~IFX_RCU_BE_AHB3M; ++ reg &= ~IFX_RCU_BE_PCIE1S; ++ #endif ++ } ++ ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); ++} ++ ++static inline void pcie_phy_pmu_enable(int pcie_port) ++{ ++ if (pcie_port == 0) { /* XXX, should use macro*/ ++ PCIE0_PHY_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ PCIE1_PHY_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline void pcie_phy_pmu_disable(int pcie_port) ++{ ++ if (pcie_port == 0) { /* XXX, should use macro*/ ++ PCIE0_PHY_PMU_SETUP(IFX_PMU_DISABLE); ++ } ++ else { ++ PCIE1_PHY_PMU_SETUP(IFX_PMU_DISABLE); ++ } ++} ++ ++static inline void pcie_pdi_big_endian(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++ if (pcie_port == 0) { ++ /* Config AHB->PCIe and PDI endianness */ ++ reg |= IFX_RCU_BE_PCIE0_PDI; ++ } ++ else { ++ /* Config AHB->PCIe and PDI endianness */ ++ reg |= IFX_RCU_BE_PCIE1_PDI; ++ } ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++} ++ ++static inline void pcie_pdi_pmu_enable(int pcie_port) ++{ ++ if (pcie_port == 0) { ++ /* Enable PDI to access PCIe PHY register */ ++ PDI0_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ PDI1_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline void pcie_core_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ ++ /* Reset Core, bit 22 */ ++ if (pcie_port == 0) { ++ reg |= 0x00400000; ++ } ++ else { ++ reg |= 0x08000000; /* Bit 27 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_core_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ if (pcie_port == 0) { ++ reg &= ~0x00400000; /* bit 22 */ ++ } ++ else { ++ reg &= ~0x08000000; /* Bit 27 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ if (pcie_port == 0) { ++ reg |= 0x00001000; /* Bit 12 */ ++ } ++ else { ++ reg |= 0x00002000; /* Bit 13 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ if (pcie_port == 0) { ++ reg &= ~0x00001000; /* Bit 12 */ ++ } ++ else { ++ reg &= ~0x00002000; /* Bit 13 */ ++ } ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_device_rst_assert(int pcie_port) ++{ ++ if (pcie_port == 0) { ++ ifx_ebu_led_set_data(11, 0); ++ } ++ else { ++ ifx_ebu_led_set_data(12, 0); ++ } ++} ++ ++static inline void pcie_device_rst_deassert(int pcie_port) ++{ ++ mdelay(100); ++ if (pcie_port == 0) { ++ ifx_ebu_led_set_data(11, 1); ++ } ++ else { ++ ifx_ebu_led_set_data(12, 1); ++ } ++ ifx_ebu_led_disable(); ++} ++ ++static inline void pcie_core_pmu_setup(int pcie_port) ++{ ++ if (pcie_port == 0) { ++ PCIE0_CTRL_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ PCIE1_CTRL_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline void pcie_msi_init(int pcie_port) ++{ ++ pcie_msi_pic_init(pcie_port); ++ if (pcie_port == 0) { ++ MSI0_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++ else { ++ MSI1_PMU_SETUP(IFX_PMU_ENABLE); ++ } ++} ++ ++static inline u32 ++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) ++{ ++ u32 tbus_number = bus_number; ++ ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ ++ if (pcibios_host_nr() > 1) { ++ tbus_number -= pcibios_1st_host_bus_nr(); ++ } ++ } ++#endif /* CONFIG_IFX_PCI */ ++ return tbus_number; ++} ++ ++static inline u32 ++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) ++{ ++ struct pci_dev *pdev; ++ u32 tvalue = value; ++ ++ /* Sanity check */ ++ pdev = pci_get_slot(bus, devfn); ++ if (pdev == NULL) { ++ return tvalue; ++ } ++ ++ /* Only care about PCI bridge */ ++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { ++ return tvalue; ++ } ++ ++ if (read) { /* Read hack */ ++ #ifdef CONFIG_IFX_PCIE_2ND_CORE ++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); ++ } ++ } ++ #endif /* CONFIG_IFX_PCIE_2ND_CORE */ ++ } ++ else { /* Write hack */ ++ #ifdef CONFIG_IFX_PCIE_2ND_CORE ++ if (pcie_port == IFX_PCIE_PORT1) { /* Port 1 must check if there are two cores enabled */ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); ++ } ++ } ++ #endif ++ } ++ return tvalue; ++} ++ ++#endif /* IFXMIPS_PCIE_AR10_H */ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_msi.c +@@ -0,0 +1,392 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_msi.c ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCI MSI sub module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe MSI Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Date $Author $Comment ++** 02 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++/*! ++ \defgroup IFX_PCIE_MSI MSI OS APIs ++ \ingroup IFX_PCIE ++ \brief PCIe bus driver OS interface functions ++*/ ++ ++/*! ++ \file ifxmips_pcie_msi.c ++ \ingroup IFX_PCIE ++ \brief PCIe MSI OS interface file ++*/ ++ ++#ifndef AUTOCONF_INCLUDED ++#include <linux/config.h> ++#endif /* AUTOCONF_INCLUDED */ ++#include <linux/init.h> ++#include <linux/sched.h> ++#include <linux/slab.h> ++#include <linux/interrupt.h> ++#include <linux/kernel_stat.h> ++#include <linux/pci.h> ++#include <linux/msi.h> ++#include <linux/module.h> ++#include <asm/bootinfo.h> ++#include <asm/irq.h> ++#include <asm/traps.h> ++ ++#include <asm/ifx/ifx_types.h> ++#include <asm/ifx/ifx_regs.h> ++#include <asm/ifx/common_routines.h> ++#include <asm/ifx/irq.h> ++ ++#include "ifxmips_pcie_reg.h" ++#include "ifxmips_pcie.h" ++ ++#define IFX_MSI_IRQ_NUM 16 ++ ++enum { ++ IFX_PCIE_MSI_IDX0 = 0, ++ IFX_PCIE_MSI_IDX1, ++ IFX_PCIE_MSI_IDX2, ++ IFX_PCIE_MSI_IDX3, ++}; ++ ++typedef struct ifx_msi_irq_idx { ++ const int irq; ++ const int idx; ++}ifx_msi_irq_idx_t; ++ ++struct ifx_msi_pic { ++ volatile u32 pic_table[IFX_MSI_IRQ_NUM]; ++ volatile u32 pic_endian; /* 0x40 */ ++}; ++typedef struct ifx_msi_pic *ifx_msi_pic_t; ++ ++typedef struct ifx_msi_irq { ++ const volatile ifx_msi_pic_t msi_pic_p; ++ const u32 msi_phy_base; ++ const ifx_msi_irq_idx_t msi_irq_idx[IFX_MSI_IRQ_NUM]; ++ /* ++ * Each bit in msi_free_irq_bitmask represents a MSI interrupt that is ++ * in use. ++ */ ++ u16 msi_free_irq_bitmask; ++ ++ /* ++ * Each bit in msi_multiple_irq_bitmask tells that the device using ++ * this bit in msi_free_irq_bitmask is also using the next bit. This ++ * is used so we can disable all of the MSI interrupts when a device ++ * uses multiple. ++ */ ++ u16 msi_multiple_irq_bitmask; ++}ifx_msi_irq_t; ++ ++static ifx_msi_irq_t msi_irqs[IFX_PCIE_CORE_NR] = { ++ { ++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI_PIC_REG_BASE, ++ .msi_phy_base = PCIE_MSI_PHY_BASE, ++ .msi_irq_idx = { ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ }, ++ .msi_free_irq_bitmask = 0, ++ .msi_multiple_irq_bitmask= 0, ++ }, ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++ { ++ .msi_pic_p = (const volatile ifx_msi_pic_t)IFX_MSI1_PIC_REG_BASE, ++ .msi_phy_base = PCIE1_MSI_PHY_BASE, ++ .msi_irq_idx = { ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ {IFX_PCIE1_MSI_IR0, IFX_PCIE_MSI_IDX0}, {IFX_PCIE1_MSI_IR1, IFX_PCIE_MSI_IDX1}, ++ {IFX_PCIE1_MSI_IR2, IFX_PCIE_MSI_IDX2}, {IFX_PCIE1_MSI_IR3, IFX_PCIE_MSI_IDX3}, ++ }, ++ .msi_free_irq_bitmask = 0, ++ .msi_multiple_irq_bitmask= 0, ++ ++ }, ++#endif /* CONFIG_IFX_PCIE_2ND_CORE */ ++}; ++ ++/* ++ * This lock controls updates to msi_free_irq_bitmask, ++ * msi_multiple_irq_bitmask and pic register settting ++ */ ++static DEFINE_SPINLOCK(ifx_pcie_msi_lock); ++ ++void pcie_msi_pic_init(int pcie_port) ++{ ++ spin_lock(&ifx_pcie_msi_lock); ++ msi_irqs[pcie_port].msi_pic_p->pic_endian = IFX_MSI_PIC_BIG_ENDIAN; ++ spin_unlock(&ifx_pcie_msi_lock); ++} ++ ++/** ++ * \fn int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) ++ * \brief Called when a driver request MSI interrupts instead of the ++ * legacy INT A-D. This routine will allocate multiple interrupts ++ * for MSI devices that support them. A device can override this by ++ * programming the MSI control bits [6:4] before calling ++ * pci_enable_msi(). ++ * ++ * \param[in] pdev Device requesting MSI interrupts ++ * \param[in] desc MSI descriptor ++ * ++ * \return -EINVAL Invalid pcie root port or invalid msi bit ++ * \return 0 OK ++ * \ingroup IFX_PCIE_MSI ++ */ ++int ++arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc) ++{ ++ int irq, pos; ++ u16 control; ++ int irq_idx; ++ int irq_step; ++ int configured_private_bits; ++ int request_private_bits; ++ struct msi_msg msg; ++ u16 search_mask; ++ struct ifx_pci_controller *ctrl = pdev->bus->sysdata; ++ int pcie_port = ctrl->port; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s %s enter\n", __func__, pci_name(pdev)); ++ ++ /* XXX, skip RC MSI itself */ ++ if (pdev->pcie_type == PCI_EXP_TYPE_ROOT_PORT) { ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s RC itself doesn't use MSI interrupt\n", __func__); ++ return -EINVAL; ++ } ++ ++ /* ++ * Read the MSI config to figure out how many IRQs this device ++ * wants. Most devices only want 1, which will give ++ * configured_private_bits and request_private_bits equal 0. ++ */ ++ pci_read_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, &control); ++ ++ /* ++ * If the number of private bits has been configured then use ++ * that value instead of the requested number. This gives the ++ * driver the chance to override the number of interrupts ++ * before calling pci_enable_msi(). ++ */ ++ configured_private_bits = (control & PCI_MSI_FLAGS_QSIZE) >> 4; ++ if (configured_private_bits == 0) { ++ /* Nothing is configured, so use the hardware requested size */ ++ request_private_bits = (control & PCI_MSI_FLAGS_QMASK) >> 1; ++ } ++ else { ++ /* ++ * Use the number of configured bits, assuming the ++ * driver wanted to override the hardware request ++ * value. ++ */ ++ request_private_bits = configured_private_bits; ++ } ++ ++ /* ++ * The PCI 2.3 spec mandates that there are at most 32 ++ * interrupts. If this device asks for more, only give it one. ++ */ ++ if (request_private_bits > 5) { ++ request_private_bits = 0; ++ } ++again: ++ /* ++ * The IRQs have to be aligned on a power of two based on the ++ * number being requested. ++ */ ++ irq_step = (1 << request_private_bits); ++ ++ /* Mask with one bit for each IRQ */ ++ search_mask = (1 << irq_step) - 1; ++ ++ /* ++ * We're going to search msi_free_irq_bitmask_lock for zero ++ * bits. This represents an MSI interrupt number that isn't in ++ * use. ++ */ ++ spin_lock(&ifx_pcie_msi_lock); ++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos += irq_step) { ++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & (search_mask << pos)) == 0) { ++ msi_irqs[pcie_port].msi_free_irq_bitmask |= search_mask << pos; ++ msi_irqs[pcie_port].msi_multiple_irq_bitmask |= (search_mask >> 1) << pos; ++ break; ++ } ++ } ++ spin_unlock(&ifx_pcie_msi_lock); ++ ++ /* Make sure the search for available interrupts didn't fail */ ++ if (pos >= IFX_MSI_IRQ_NUM) { ++ if (request_private_bits) { ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s: Unable to find %d free " ++ "interrupts, trying just one", __func__, 1 << request_private_bits); ++ request_private_bits = 0; ++ goto again; ++ } ++ else { ++ printk(KERN_ERR "%s: Unable to find a free MSI interrupt\n", __func__); ++ return -EINVAL; ++ } ++ } ++ irq = msi_irqs[pcie_port].msi_irq_idx[pos].irq; ++ irq_idx = msi_irqs[pcie_port].msi_irq_idx[pos].idx; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pos %d, irq %d irq_idx %d\n", pos, irq, irq_idx); ++ ++ /* ++ * Initialize MSI. This has to match the memory-write endianess from the device ++ * Address bits [23:12] ++ */ ++ spin_lock(&ifx_pcie_msi_lock); ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] = SM(irq_idx, IFX_MSI_PIC_INT_LINE) | ++ SM((msi_irqs[pcie_port].msi_phy_base >> 12), IFX_MSI_PIC_MSG_ADDR) | ++ SM((1 << pos), IFX_MSI_PIC_MSG_DATA); ++ ++ /* Enable this entry */ ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~IFX_MSI_PCI_INT_DISABLE; ++ spin_unlock(&ifx_pcie_msi_lock); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "pic_table[%d]: 0x%08x\n", ++ pos, msi_irqs[pcie_port].msi_pic_p->pic_table[pos]); ++ ++ /* Update the number of IRQs the device has available to it */ ++ control &= ~PCI_MSI_FLAGS_QSIZE; ++ control |= (request_private_bits << 4); ++ pci_write_config_word(pdev, desc->msi_attrib.pos + PCI_MSI_FLAGS, control); ++ ++ set_irq_msi(irq, desc); ++ msg.address_hi = 0x0; ++ msg.address_lo = msi_irqs[pcie_port].msi_phy_base; ++ msg.data = SM((1 << pos), IFX_MSI_PIC_MSG_DATA); ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "msi_data: pos %d 0x%08x\n", pos, msg.data); ++ ++ write_msi_msg(irq, &msg); ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); ++ return 0; ++} ++ ++static int ++pcie_msi_irq_to_port(unsigned int irq, int *port) ++{ ++ int ret = 0; ++ ++ if (irq == IFX_PCIE_MSI_IR0 || irq == IFX_PCIE_MSI_IR1 || ++ irq == IFX_PCIE_MSI_IR2 || irq == IFX_PCIE_MSI_IR3) { ++ *port = IFX_PCIE_PORT0; ++ } ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++ else if (irq == IFX_PCIE1_MSI_IR0 || irq == IFX_PCIE1_MSI_IR1 || ++ irq == IFX_PCIE1_MSI_IR2 || irq == IFX_PCIE1_MSI_IR3) { ++ *port = IFX_PCIE_PORT1; ++ } ++#endif /* CONFIG_IFX_PCIE_2ND_CORE */ ++ else { ++ printk(KERN_ERR "%s: Attempted to teardown illegal " ++ "MSI interrupt (%d)\n", __func__, irq); ++ ret = -EINVAL; ++ } ++ return ret; ++} ++ ++/** ++ * \fn void arch_teardown_msi_irq(unsigned int irq) ++ * \brief Called when a device no longer needs its MSI interrupts. All ++ * MSI interrupts for the device are freed. ++ * ++ * \param irq The devices first irq number. There may be multple in sequence. ++ * \return none ++ * \ingroup IFX_PCIE_MSI ++ */ ++void ++arch_teardown_msi_irq(unsigned int irq) ++{ ++ int pos; ++ int number_irqs; ++ u16 bitmask; ++ int pcie_port; ++ ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s enter\n", __func__); ++ ++ BUG_ON(irq > INT_NUM_IM4_IRL31); ++ ++ if (pcie_msi_irq_to_port(irq, &pcie_port) != 0) { ++ return; ++ } ++ ++ /* Shift the mask to the correct bit location, not always correct ++ * Probally, the first match will be chosen. ++ */ ++ for (pos = 0; pos < IFX_MSI_IRQ_NUM; pos++) { ++ if ((msi_irqs[pcie_port].msi_irq_idx[pos].irq == irq) ++ && (msi_irqs[pcie_port].msi_free_irq_bitmask & ( 1 << pos))) { ++ break; ++ } ++ } ++ if (pos >= IFX_MSI_IRQ_NUM) { ++ printk(KERN_ERR "%s: Unable to find a matched MSI interrupt\n", __func__); ++ return; ++ } ++ spin_lock(&ifx_pcie_msi_lock); ++ /* Disable this entry */ ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] |= IFX_MSI_PCI_INT_DISABLE; ++ msi_irqs[pcie_port].msi_pic_p->pic_table[pos] &= ~(IFX_MSI_PIC_INT_LINE | IFX_MSI_PIC_MSG_ADDR | IFX_MSI_PIC_MSG_DATA); ++ spin_unlock(&ifx_pcie_msi_lock); ++ /* ++ * Count the number of IRQs we need to free by looking at the ++ * msi_multiple_irq_bitmask. Each bit set means that the next ++ * IRQ is also owned by this device. ++ */ ++ number_irqs = 0; ++ while (((pos + number_irqs) < IFX_MSI_IRQ_NUM) && ++ (msi_irqs[pcie_port].msi_multiple_irq_bitmask & (1 << (pos + number_irqs)))) { ++ number_irqs++; ++ } ++ number_irqs++; ++ ++ /* Mask with one bit for each IRQ */ ++ bitmask = (1 << number_irqs) - 1; ++ ++ bitmask <<= pos; ++ if ((msi_irqs[pcie_port].msi_free_irq_bitmask & bitmask) != bitmask) { ++ printk(KERN_ERR "%s: Attempted to teardown MSI " ++ "interrupt (%d) not in use\n", __func__, irq); ++ return; ++ } ++ /* Checks are done, update the in use bitmask */ ++ spin_lock(&ifx_pcie_msi_lock); ++ msi_irqs[pcie_port].msi_free_irq_bitmask &= ~bitmask; ++ msi_irqs[pcie_port].msi_multiple_irq_bitmask &= ~(bitmask >> 1); ++ spin_unlock(&ifx_pcie_msi_lock); ++ IFX_PCIE_PRINT(PCIE_MSG_MSI, "%s exit\n", __func__); ++} ++ ++MODULE_LICENSE("GPL"); ++MODULE_AUTHOR("Chuanhua.Lei@infineon.com"); ++MODULE_SUPPORTED_DEVICE("Infineon PCIe IP builtin MSI PIC module"); ++MODULE_DESCRIPTION("Infineon PCIe IP builtin MSI PIC driver"); ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_phy.c +@@ -0,0 +1,478 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_phy.c ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe PHY sub module ++** ++** DATE : 14 May 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 14 May,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++/*! ++ \file ifxmips_pcie_phy.c ++ \ingroup IFX_PCIE ++ \brief PCIe PHY PLL register programming source file ++*/ ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <asm/paccess.h> ++#include <linux/delay.h> ++ ++#include "ifxmips_pcie_reg.h" ++#include "ifxmips_pcie.h" ++ ++/* PCIe PDI only supports 16 bit operation */ ++ ++#define IFX_PCIE_PHY_REG_WRITE16(__addr, __data) \ ++ ((*(volatile u16 *) (__addr)) = (__data)) ++ ++#define IFX_PCIE_PHY_REG_READ16(__addr) \ ++ (*(volatile u16 *) (__addr)) ++ ++#define IFX_PCIE_PHY_REG16(__addr) \ ++ (*(volatile u16 *) (__addr)) ++ ++#define IFX_PCIE_PHY_REG(__reg, __value, __mask) do { \ ++ u16 read_data; \ ++ u16 write_data; \ ++ read_data = IFX_PCIE_PHY_REG_READ16((__reg)); \ ++ write_data = (read_data & ((u16)~(__mask))) | (((u16)(__value)) & ((u16)(__mask)));\ ++ IFX_PCIE_PHY_REG_WRITE16((__reg), write_data); \ ++} while (0) ++ ++#define IFX_PCIE_PLL_TIMEOUT 1000 /* Tunnable */ ++ ++//#define IFX_PCI_PHY_REG_DUMP ++ ++#ifdef IFX_PCI_PHY_REG_DUMP ++static void ++pcie_phy_reg_dump(int pcie_port) ++{ ++ printk("PLL REGFILE\n"); ++ printk("PCIE_PHY_PLL_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL1(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL2(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL3(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL4 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL4(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL5 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL5(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL6 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL6(pcie_port))); ++ printk("PCIE_PHY_PLL_CTRL7 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_CTRL7(pcie_port))); ++ printk("PCIE_PHY_PLL_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL1(pcie_port))); ++ printk("PCIE_PHY_PLL_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL2(pcie_port))); ++ printk("PCIE_PHY_PLL_A_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_A_CTRL3(pcie_port))); ++ printk("PCIE_PHY_PLL_STATUS 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port))); ++ ++ printk("TX1 REGFILE\n"); ++ printk("PCIE_PHY_TX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX1_CTRL3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_CTRL3(pcie_port))); ++ printk("PCIE_PHY_TX1_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX1_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_A_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX1_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD1(pcie_port))); ++ printk("PCIE_PHY_TX1_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD2(pcie_port))); ++ printk("PCIE_PHY_TX1_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX1_MOD3(pcie_port))); ++ ++ printk("TX2 REGFILE\n"); ++ printk("PCIE_PHY_TX2_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX2_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX2_A_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL1(pcie_port))); ++ printk("PCIE_PHY_TX2_A_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_A_CTRL2(pcie_port))); ++ printk("PCIE_PHY_TX2_MOD1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD1(pcie_port))); ++ printk("PCIE_PHY_TX2_MOD2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD2(pcie_port))); ++ printk("PCIE_PHY_TX2_MOD3 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_TX2_MOD3(pcie_port))); ++ ++ printk("RX1 REGFILE\n"); ++ printk("PCIE_PHY_RX1_CTRL1 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL1(pcie_port))); ++ printk("PCIE_PHY_RX1_CTRL2 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CTRL2(pcie_port))); ++ printk("PCIE_PHY_RX1_CDR 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_CDR(pcie_port))); ++ printk("PCIE_PHY_RX1_EI 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_EI(pcie_port))); ++ printk("PCIE_PHY_RX1_A_CTRL 0x%04x\n", IFX_PCIE_PHY_REG16(PCIE_PHY_RX1_A_CTRL(pcie_port))); ++} ++#endif /* IFX_PCI_PHY_REG_DUMP */ ++ ++static void ++pcie_phy_comm_setup(int pcie_port) ++{ ++ /* PLL Setting */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); ++ ++ /* increase the bias reference voltage */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); ++ ++ /* Endcnt */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); ++ ++ /* force */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); ++ ++ /* predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); ++ ++ /* ctrl_lim */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); ++ ++ /* ctrl */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); ++ ++ /* predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); ++ ++ /* RTERM*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); ++ ++ /* Improved 100MHz clock output */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); ++ ++ /* Reduced CDR BW to avoid glitches */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); ++} ++ ++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++static void ++pcie_phy_36mhz_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ ++ /* en_ext_mmd_div_ratio */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); ++ ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); ++ ++ /* const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); ++ ++ /* const sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); ++ ++ /* pllmod */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ ++ ++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE ++static void ++pcie_phy_36mhz_ssc_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ ++ /* PLL Setting */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL1(pcie_port), 0x120e, 0xFFFF); ++ ++ /* Increase the bias reference voltage */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x39D7, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x0900, 0xFFFF); ++ ++ /* Endcnt */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_EI(pcie_port), 0x0004, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_A_CTRL(pcie_port), 0x6803, 0xFFFF); ++ ++ /* Force */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0008, 0x0008); ++ ++ /* Predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL2(pcie_port), 0x0706, 0xFFFF); ++ ++ /* ctrl_lim */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL3(pcie_port), 0x1FFF, 0xFFFF); ++ ++ /* ctrl */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_A_CTRL1(pcie_port), 0x0800, 0xFF00); ++ ++ /* predrv_ser_en */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4702, 0x7F00); ++ ++ /* RTERM*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL2(pcie_port), 0x2e00, 0xFFFF); ++ ++ /* en_ext_mmd_div_ratio */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0400, 0x0400); ++ ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); ++ ++ /* const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); ++ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0100); ++ /* const sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); ++ ++ /* pllmod */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1c72, 0xFFFF); ++ ++ /* improved 100MHz clock output */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL2(pcie_port), 0x3096, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_A_CTRL2(pcie_port), 0x4707, 0xFFFF); ++ ++ /* reduced CDR BW to avoid glitches */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CDR(pcie_port), 0x0235, 0xFFFF); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE */ ++ ++#ifdef CONFIG_IFX_PCIE_PHY_25MHZ_MODE ++static void ++pcie_phy_25mhz_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0000, 0x0200); ++ ++ /* en_ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0002, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0040, 0x0070); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x6000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x4000, 0x4000); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_25MHZ_MODE */ ++ ++#ifdef CONFIG_IFX_PCIE_PHY_100MHZ_MODE ++static void ++pcie_phy_100mhz_mode_setup(int pcie_port) ++{ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d enter\n", __func__, pcie_port); ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Initial PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++ /* en_ext_mmd_div_ratio */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0002); ++ ++ /* ext_mmd_div_ratio*/ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL3(pcie_port), 0x0000, 0x0070); ++ ++ /* pll_ensdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0200, 0x0200); ++ ++ /* en_const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x0100, 0x0100); ++ ++ /* mmd */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL3(pcie_port), 0x2000, 0xe000); ++ ++ /* lf_mode */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_A_CTRL2(pcie_port), 0x0000, 0x4000); ++ ++ /* const_sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL1(pcie_port), 0x38e4, 0xFFFF); ++ ++ /* const sdm */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL2(pcie_port), 0x00ee, 0x00FF); ++ ++ /* pllmod */ ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL7(pcie_port), 0x0002, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL6(pcie_port), 0x3a04, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL5(pcie_port), 0xfae3, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_PLL_CTRL4(pcie_port), 0x1b72, 0xFFFF); ++ ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "%s pcie_port %d exit\n", __func__, pcie_port); ++} ++#endif /* CONFIG_IFX_PCIE_PHY_100MHZ_MODE */ ++ ++static int ++pcie_phy_wait_startup_ready(int pcie_port) ++{ ++ int i; ++ ++ for (i = 0; i < IFX_PCIE_PLL_TIMEOUT; i++) { ++ if ((IFX_PCIE_PHY_REG16(PCIE_PHY_PLL_STATUS(pcie_port)) & 0x0040) != 0) { ++ break; ++ } ++ udelay(10); ++ } ++ if (i >= IFX_PCIE_PLL_TIMEOUT) { ++ printk(KERN_ERR "%s PLL Link timeout\n", __func__); ++ return -1; ++ } ++ return 0; ++} ++ ++static void ++pcie_phy_load_enable(int pcie_port, int slice) ++{ ++ /* Set the load_en of tx/rx slice to '1' */ ++ switch (slice) { ++ case 1: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0010, 0x0010); ++ break; ++ case 2: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0010, 0x0010); ++ break; ++ case 3: ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0002, 0x0002); ++ break; ++ } ++} ++ ++static void ++pcie_phy_load_disable(int pcie_port, int slice) ++{ ++ /* set the load_en of tx/rx slice to '0' */ ++ switch (slice) { ++ case 1: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_CTRL1(pcie_port), 0x0000, 0x0010); ++ break; ++ case 2: ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_CTRL1(pcie_port), 0x0000, 0x0010); ++ break; ++ case 3: ++ IFX_PCIE_PHY_REG(PCIE_PHY_RX1_CTRL1(pcie_port), 0x0000, 0x0002); ++ break; ++ } ++} ++ ++static void ++pcie_phy_load_war(int pcie_port) ++{ ++ int slice; ++ ++ for (slice = 1; slice < 4; slice++) { ++ pcie_phy_load_enable(pcie_port, slice); ++ udelay(1); ++ pcie_phy_load_disable(pcie_port, slice); ++ } ++} ++ ++static void ++pcie_phy_tx2_modulation(int pcie_port) ++{ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD1(pcie_port), 0x1FFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD2(pcie_port), 0xFFFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0601, 0xFFFF); ++ mdelay(1); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX2_MOD3(pcie_port), 0x0001, 0xFFFF); ++} ++ ++static void ++pcie_phy_tx1_modulation(int pcie_port) ++{ ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD1(pcie_port), 0x1FFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD2(pcie_port), 0xFFFE, 0xFFFF); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0601, 0xFFFF); ++ mdelay(1); ++ IFX_PCIE_PHY_REG(PCIE_PHY_TX1_MOD3(pcie_port), 0x0001, 0xFFFF); ++} ++ ++static void ++pcie_phy_tx_modulation_war(int pcie_port) ++{ ++ int i; ++ ++#define PCIE_PHY_MODULATION_NUM 5 ++ for (i = 0; i < PCIE_PHY_MODULATION_NUM; i++) { ++ pcie_phy_tx2_modulation(pcie_port); ++ pcie_phy_tx1_modulation(pcie_port); ++ } ++#undef PCIE_PHY_MODULATION_NUM ++} ++ ++void ++pcie_phy_clock_mode_setup(int pcie_port) ++{ ++ pcie_pdi_big_endian(pcie_port); ++ ++ /* Enable PDI to access PCIe PHY register */ ++ pcie_pdi_pmu_enable(pcie_port); ++ ++ /* Configure PLL and PHY clock */ ++ pcie_phy_comm_setup(pcie_port); ++ ++#ifdef CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++ pcie_phy_36mhz_mode_setup(pcie_port); ++#elif defined(CONFIG_IFX_PCIE_PHY_36MHZ_SSC_MODE) ++ pcie_phy_36mhz_ssc_mode_setup(pcie_port); ++#elif defined(CONFIG_IFX_PCIE_PHY_25MHZ_MODE) ++ pcie_phy_25mhz_mode_setup(pcie_port); ++#elif defined (CONFIG_IFX_PCIE_PHY_100MHZ_MODE) ++ pcie_phy_100mhz_mode_setup(pcie_port); ++#else ++ #error "PCIE PHY Clock Mode must be chosen first!!!!" ++#endif /* CONFIG_IFX_PCIE_PHY_36MHZ_MODE */ ++ ++ /* Enable PCIe PHY and make PLL setting take effect */ ++ pcie_phy_pmu_enable(pcie_port); ++ ++ /* Check if we are in startup_ready status */ ++ pcie_phy_wait_startup_ready(pcie_port); ++ ++ pcie_phy_load_war(pcie_port); ++ ++ /* Apply TX modulation workarounds */ ++ pcie_phy_tx_modulation_war(pcie_port); ++ ++#ifdef IFX_PCI_PHY_REG_DUMP ++ IFX_PCIE_PRINT(PCIE_MSG_PHY, "Modified PHY register dump\n"); ++ pcie_phy_reg_dump(pcie_port); ++#endif ++} ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_pm.c +@@ -0,0 +1,176 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_pm.c ++** PROJECT : IFX UEIP ++** MODULES : PCIE Root Complex Driver ++** ++** DATE : 21 Dec 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIE Root Complex Driver Power Managment ++** COPYRIGHT : Copyright (c) 2009 ++** Lantiq Deutschland GmbH ++** Am Campeon 3, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 21 Dec,2009 Lei Chuanhua First UEIP release ++*******************************************************************************/ ++/*! ++ \defgroup IFX_PCIE_PM Power Management functions ++ \ingroup IFX_PCIE ++ \brief IFX PCIE Root Complex Driver power management functions ++*/ ++ ++/*! ++ \file ifxmips_pcie_pm.c ++ \ingroup IFX_PCIE ++ \brief source file for PCIE Root Complex Driver Power Management ++*/ ++ ++#ifndef EXPORT_SYMTAB ++#define EXPORT_SYMTAB ++#endif ++#ifndef AUTOCONF_INCLUDED ++#include <linux/config.h> ++#endif /* AUTOCONF_INCLUDED */ ++#include <linux/version.h> ++#include <linux/module.h> ++#include <linux/types.h> ++#include <linux/kernel.h> ++#include <asm/system.h> ++ ++/* Project header */ ++#include <asm/ifx/ifx_types.h> ++#include <asm/ifx/ifx_regs.h> ++#include <asm/ifx/common_routines.h> ++#include <asm/ifx/ifx_pmcu.h> ++#include "ifxmips_pcie_pm.h" ++ ++/** ++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) ++ * \brief the callback function to request pmcu state in the power management hardware-dependent module ++ * ++ * \param pmcuState This parameter is a PMCU state. ++ * ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_state_change(IFX_PMCU_STATE_t pmcuState) ++{ ++ switch(pmcuState) ++ { ++ case IFX_PMCU_STATE_D0: ++ return IFX_PMCU_RETURN_SUCCESS; ++ case IFX_PMCU_STATE_D1: // Not Applicable ++ return IFX_PMCU_RETURN_DENIED; ++ case IFX_PMCU_STATE_D2: // Not Applicable ++ return IFX_PMCU_RETURN_DENIED; ++ case IFX_PMCU_STATE_D3: // Module clock gating and Power gating ++ return IFX_PMCU_RETURN_SUCCESS; ++ default: ++ return IFX_PMCU_RETURN_DENIED; ++ } ++} ++ ++/** ++ * \fn static IFX_PMCU_RETURN_t ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) ++ * \brief the callback function to get pmcu state in the power management hardware-dependent module ++ ++ * \param pmcuState Pointer to return power state. ++ * ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \return IFX_PMCU_RETURN_DENIED Not allowed to operate power state ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_state_get(IFX_PMCU_STATE_t *pmcuState) ++{ ++ return IFX_PMCU_RETURN_SUCCESS; ++} ++ ++/** ++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule ++ * ++ * \param pmcuModule Module ++ * \param newState New state ++ * \param oldState Old state ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_prechange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++{ ++ return IFX_PMCU_RETURN_SUCCESS; ++} ++ ++/** ++ * \fn IFX_PMCU_RETURN_t ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++ * \brief Apply all callbacks registered to be executed before a state change for pmcuModule ++ * ++ * \param pmcuModule Module ++ * \param newState New state ++ * \param oldState Old state ++ * \return IFX_PMCU_RETURN_SUCCESS Set Power State successfully ++ * \return IFX_PMCU_RETURN_ERROR Failed to set power state. ++ * \ingroup IFX_PCIE_PM ++ */ ++static IFX_PMCU_RETURN_t ++ifx_pcie_pmcu_postchange(IFX_PMCU_MODULE_t pmcuModule, IFX_PMCU_STATE_t newState, IFX_PMCU_STATE_t oldState) ++{ ++ return IFX_PMCU_RETURN_SUCCESS; ++} ++ ++/** ++ * \fn static void ifx_pcie_pmcu_init(void) ++ * \brief Register with central PMCU module ++ * \return none ++ * \ingroup IFX_PCIE_PM ++ */ ++void ++ifx_pcie_pmcu_init(void) ++{ ++ IFX_PMCU_REGISTER_t pmcuRegister; ++ ++ /* XXX, hook driver context */ ++ ++ /* State function register */ ++ memset(&pmcuRegister, 0, sizeof(IFX_PMCU_REGISTER_t)); ++ pmcuRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; ++ pmcuRegister.pmcuModuleNr = 0; ++ pmcuRegister.ifx_pmcu_state_change = ifx_pcie_pmcu_state_change; ++ pmcuRegister.ifx_pmcu_state_get = ifx_pcie_pmcu_state_get; ++ pmcuRegister.pre = ifx_pcie_pmcu_prechange; ++ pmcuRegister.post= ifx_pcie_pmcu_postchange; ++ ifx_pmcu_register(&pmcuRegister); ++} ++ ++/** ++ * \fn static void ifx_pcie_pmcu_exit(void) ++ * \brief Unregister with central PMCU module ++ * ++ * \return none ++ * \ingroup IFX_PCIE_PM ++ */ ++void ++ifx_pcie_pmcu_exit(void) ++{ ++ IFX_PMCU_REGISTER_t pmcuUnRegister; ++ ++ /* XXX, hook driver context */ ++ ++ pmcuUnRegister.pmcuModule = IFX_PMCU_MODULE_PCIE; ++ pmcuUnRegister.pmcuModuleNr = 0; ++ ifx_pmcu_unregister(&pmcuUnRegister); ++} ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_pm.h +@@ -0,0 +1,36 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_pm.h ++** PROJECT : IFX UEIP ++** MODULES : PCIe Root Complex Driver ++** ++** DATE : 21 Dec 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver Power Managment ++** COPYRIGHT : Copyright (c) 2009 ++** Lantiq Deutschland GmbH ++** Am Campeon 3, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 21 Dec,2009 Lei Chuanhua First UEIP release ++*******************************************************************************/ ++/*! ++ \file ifxmips_pcie_pm.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe Root Complex Driver Power Management ++*/ ++ ++#ifndef IFXMIPS_PCIE_PM_H ++#define IFXMIPS_PCIE_PM_H ++ ++void ifx_pcie_pmcu_init(void); ++void ifx_pcie_pmcu_exit(void); ++ ++#endif /* IFXMIPS_PCIE_PM_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_reg.h +@@ -0,0 +1,1001 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_reg.h ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++#ifndef IFXMIPS_PCIE_REG_H ++#define IFXMIPS_PCIE_REG_H ++/*! ++ \file ifxmips_pcie_reg.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe module register definition ++*/ ++/* PCIe Address Mapping Base */ ++#define PCIE_CFG_PHY_BASE 0x1D000000UL ++#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) ++#define PCIE_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE_MEM_PHY_BASE 0x1C000000UL ++#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) ++#define PCIE_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) ++ ++#define PCIE_IO_PHY_BASE 0x1D800000UL ++#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) ++#define PCIE_IO_SIZE (1 * 1024 * 1024) ++#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) ++ ++#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) ++#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) ++#define PCIE_MSI_PHY_BASE 0x1F600000UL ++ ++#define PCIE_PDI_PHY_BASE 0x1F106800UL ++#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) ++#define PCIE_PDI_SIZE 0x400 ++ ++#define PCIE1_CFG_PHY_BASE 0x19000000UL ++#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) ++#define PCIE1_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE1_MEM_PHY_BASE 0x18000000UL ++#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) ++#define PCIE1_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) ++ ++#define PCIE1_IO_PHY_BASE 0x19800000UL ++#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) ++#define PCIE1_IO_SIZE (1 * 1024 * 1024) ++#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) ++ ++#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) ++#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) ++#define PCIE1_MSI_PHY_BASE 0x1F400000UL ++ ++#define PCIE1_PDI_PHY_BASE 0x1F700400UL ++#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) ++#define PCIE1_PDI_SIZE 0x400 ++ ++#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) ++#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) ++#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) ++#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) ++#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) ++#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) ++#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) ++#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) ++ ++/* PCIe Application Logic Register */ ++/* RC Core Control Register */ ++#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) ++/* This should be enabled after initializing configuratin registers ++ * Also should check link status retraining bit ++ */ ++#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ ++ ++/* RC Core Debug Register */ ++#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) ++#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 ++ ++#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ ++#define PCIE_RC_DR_PM_DEV_STATE_S 9 ++ ++#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ ++#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ ++#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ ++ ++/* Current Power State Definition */ ++enum { ++ PCIE_RC_DR_D0 = 0, ++ PCIE_RC_DR_D1, /* Not supported */ ++ PCIE_RC_DR_D2, /* Not supported */ ++ PCIE_RC_DR_D3, ++ PCIE_RC_DR_UN, ++}; ++ ++/* PHY Link Status Register */ ++#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) ++#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ ++ ++/* Electromechanical Control Register */ ++#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) ++#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ ++#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ ++#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ ++#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ ++#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ ++#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ ++#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ ++#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ ++ ++/* Interrupt Status Register */ ++#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) ++#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ ++#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ ++#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ ++#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ ++#define PCIE_IR_SR_AHB_LU_ERR_S 4 ++#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ ++#define PCIE_IR_SR_INT_MSG_NUM_S 9 ++#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 ++ ++/* Message Control Register */ ++#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) ++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ ++#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ ++ ++#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) ++ ++/* Vendor-Defined Message Requester ID Register */ ++#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) ++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF ++#define PCIE_VDM_RID_VDMRID_S 0 ++ ++/* ASPM Control Register */ ++#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) ++#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ ++#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ ++#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ ++ ++/* Vendor Message DW0 Register */ ++#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) ++#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ ++#define PCIE_VM_MSG_DW0_TYPE_S 0 ++#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ ++#define PCIE_VM_MSG_DW0_FORMAT_S 5 ++#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ ++#define PCIE_VM_MSG_DW0_TC_S 12 ++#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ ++#define PCIE_VM_MSG_DW0_ATTR_S 18 ++#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ ++#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ ++#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ ++#define PCIE_VM_MSG_DW0_LEN_S 22 ++ ++/* Format Definition */ ++enum { ++ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ ++ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ ++ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ ++ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ ++}; ++ ++/* Traffic Class Definition */ ++enum { ++ PCIE_VM_MSG_TC0 = 0, ++ PCIE_VM_MSG_TC1, ++ PCIE_VM_MSG_TC2, ++ PCIE_VM_MSG_TC3, ++ PCIE_VM_MSG_TC4, ++ PCIE_VM_MSG_TC5, ++ PCIE_VM_MSG_TC6, ++ PCIE_VM_MSG_TC7, ++}; ++ ++/* Attributes Definition */ ++enum { ++ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ ++ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ ++ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ ++ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ ++}; ++ ++/* Payload Size Definition */ ++#define PCIE_VM_MSG_LEN_MIN 0 ++#define PCIE_VM_MSG_LEN_MAX 1024 ++ ++/* Vendor Message DW1 Register */ ++#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) ++#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ ++#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 ++#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ ++#define PCIE_VM_MSG_DW1_CODE_S 16 ++#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ ++#define PCIE_VM_MSG_DW1_TAG_S 24 ++ ++#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) ++#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) ++ ++/* Vendor Message Request Register */ ++#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) ++#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ ++ ++ ++/* AHB Slave Side Band Control Register */ ++#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) ++#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ ++#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ ++#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ ++#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ ++#define PCIE_AHB_SSB_REQ_ATTR_S 3 ++#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ ++#define PCIE_AHB_SSB_REQ_TC_S 5 ++ ++/* AHB Master SideBand Ctrl Register */ ++#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) ++#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ ++#define PCIE_AHB_MSB_RESP_ATTR_S 0 ++#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ ++#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ ++#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ ++#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 ++ ++/* AHB Control Register, fixed bus enumeration exception */ ++#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) ++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 ++ ++/* Interrupt Enalbe Register */ ++#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) ++#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) ++#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) ++ ++/* PCIe interrupt enable/control/capture register definition */ ++#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ ++#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ ++#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ ++#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ ++#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ ++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ ++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ ++#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ ++#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ ++#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ ++#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ ++#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ ++#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ ++#define PCIE_IRN_INTA 0x00002000 /* INTA */ ++#define PCIE_IRN_INTB 0x00004000 /* INTB */ ++#define PCIE_IRN_INTC 0x00008000 /* INTC */ ++#define PCIE_IRN_INTD 0x00010000 /* INTD */ ++#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ ++ ++#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ ++ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ ++ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ ++ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ ++ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) ++/* PCIe RC Configuration Register */ ++#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) ++ ++/* Bit definition from pci_reg.h */ ++#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) ++#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) ++#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ ++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ ++#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ ++#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ ++ ++#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ ++/* Bus Number Register bits */ ++#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF ++#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 ++#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 ++#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 ++#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 ++#define PCIE_PNR_SUB_BUS_NUM_S 16 ++ ++/* IO Base/Limit Register bits */ ++#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ ++#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 ++#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 ++#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 ++#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 ++ ++/* Non-prefetchable Memory Base/Limit Register bit */ ++#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ ++#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 ++#define PCIE_MBML_MEM_BASE_ADDR_S 4 ++#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 ++#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 ++ ++/* Prefetchable Memory Base/Limit Register bit */ ++#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ ++#define PCIE_PMBL_64BIT_ADDR 0x00000001 ++#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 ++#define PCIE_PMBL_UPPER_12BIT_S 4 ++#define PCIE_PMBL_E64MA 0x00010000 ++#define PCIE_PMBL_END_ADDR 0xFFF00000 ++#define PCIE_PMBL_END_ADDR_S 20 ++#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ ++#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ ++ ++/* I/O Base/Limit Upper 16 bits register */ ++#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 ++ ++#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) ++#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) ++ ++/* Interrupt and Secondary Bridge Control Register */ ++#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) ++ ++#define PCIE_INTRBCTRL_INT_LINE 0x000000FF ++#define PCIE_INTRBCTRL_INT_LINE_S 0 ++#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 ++#define PCIE_INTRBCTRL_INT_PIN_S 8 ++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ ++#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ ++#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ ++#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ ++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ ++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ ++/* Others are read only */ ++enum { ++ PCIE_INTRBCTRL_INT_NON = 0, ++ PCIE_INTRBCTRL_INTA, ++ PCIE_INTRBCTRL_INTB, ++ PCIE_INTRBCTRL_INTC, ++ PCIE_INTRBCTRL_INTD, ++}; ++ ++#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) ++ ++/* Power Management Control and Status Register */ ++#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) ++ ++#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ ++#define PCIE_PM_CSR_POWER_STATE_S 0 ++#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ ++#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ ++#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ ++ ++/* MSI Capability Register for EP */ ++#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) ++ ++#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ ++#define PCIE_MCAPR_MSI_CAP_ID_S 0 ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 ++#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 ++#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ ++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 ++#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ ++ ++/* MSI Message Address Register */ ++#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) ++ ++#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ ++ ++/* MSI Message Upper Address Register */ ++#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) ++ ++/* MSI Message Data Register */ ++#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) ++ ++#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ ++#define PCIE_MD_DATA_S 0 ++ ++/* PCI Express Capability Register */ ++#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) ++ ++#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ ++#define PCIE_XCAP_ID_S 0 ++#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_XCAP_NEXT_CAP_S 8 ++#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ ++#define PCIE_XCAP_VER_S 16 ++#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ ++#define PCIE_XCAP_DEV_PORT_TYPE_S 20 ++#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ ++#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ ++#define PCIE_XCAP_MSG_INT_NUM_S 25 ++ ++/* Device Capability Register */ ++#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) ++ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 ++#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ ++#define PCIE_DCAP_PHANTOM_FUNC_S 3 ++#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ ++#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ ++#define PCIE_DCAP_EP_L0S_LATENCY_S 6 ++#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ ++#define PCIE_DCAP_EP_L1_LATENCY_S 9 ++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ ++ ++/* Maximum payload size supported */ ++enum { ++ PCIE_MAX_PAYLOAD_128 = 0, ++ PCIE_MAX_PAYLOAD_256, ++ PCIE_MAX_PAYLOAD_512, ++ PCIE_MAX_PAYLOAD_1024, ++ PCIE_MAX_PAYLOAD_2048, ++ PCIE_MAX_PAYLOAD_4096, ++}; ++ ++/* Device Control and Status Register */ ++#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) ++ ++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ ++#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ ++#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ ++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 ++#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ ++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ ++#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ ++#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 ++#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ ++#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ ++#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ ++#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ ++#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ ++#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ ++ ++#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ ++ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ ++ PCIE_DCTLSYS_UR_REQ_EN) ++ ++/* Link Capability Register */ ++#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) ++#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ ++#define PCIE_LCAP_MAX_LINK_SPEED_S 0 ++#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ ++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 ++#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ ++#define PCIE_LCAP_ASPM_LEVEL_S 10 ++#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ ++#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 ++#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ ++#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 ++#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ ++#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ ++#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ ++#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ ++#define PCIE_LCAP_PORT_NUM_S 24 ++ ++/* Maximum Length width definition */ ++#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 ++#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ ++#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 ++#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 ++#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 ++#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C ++#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 ++#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 ++ ++/* Active State Link PM definition */ ++enum { ++ PCIE_ASPM_RES0 = 0, ++ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ ++ PCIE_ASPM_RES1, ++ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ ++}; ++ ++/* L0s Exit Latency definition */ ++enum { ++ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ ++ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ ++ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ ++ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ ++ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ ++ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ ++ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ ++ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ ++}; ++ ++/* L1 Exit Latency definition */ ++enum { ++ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ ++ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ ++ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ ++ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ ++ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ ++ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ ++ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ ++ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ ++}; ++ ++/* Link Control and Status Register */ ++#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) ++#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ ++#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 ++#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ ++#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ ++#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ ++#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ ++#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ ++#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ ++#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ ++#define PCIE_LCTLSTS_LINK_SPEED_S 16 ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 ++#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ ++#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ ++#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ ++ ++/* Slot Capabilities Register */ ++#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) ++ ++/* Slot Capabilities */ ++#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) ++ ++/* Root Control and Capability Register */ ++#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) ++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ ++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ ++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ ++#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ ++#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ ++ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) ++/* Root Status Register */ ++#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) ++#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ ++#define PCIE_RSTS_PME_REQ_ID_S 0 ++#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ ++#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ ++ ++/* PCI Express Enhanced Capability Header */ ++#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) ++#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ ++#define PCIE_ENHANCED_CAP_ID_S 0 ++#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ ++#define PCIE_ENHANCED_CAP_VER_S 16 ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 ++ ++/* Uncorrectable Error Status Register */ ++#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) ++#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ ++#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ ++#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ ++#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ ++#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ ++#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ ++#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ ++#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ ++#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ ++#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ ++#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ ++#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ ++ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ ++ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ ++ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) ++ ++/* Uncorrectable Error Mask Register, Mask means no report */ ++#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) ++ ++/* Uncorrectable Error Severity Register */ ++#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) ++ ++/* Correctable Error Status Register */ ++#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) ++#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ ++#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ ++#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ ++#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ ++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ ++#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ ++#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ ++ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) ++ ++/* Correctable Error Mask Register */ ++#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) ++ ++/* Advanced Error Capabilities and Control Register */ ++#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) ++#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ ++#define PCIE_AECCR_FIRST_ERR_PTR_S 0 ++#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ ++#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ ++#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ ++#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ ++ ++/* Header Log Register 1 */ ++#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) ++ ++/* Header Log Register 2 */ ++#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) ++ ++/* Header Log Register 3 */ ++#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) ++ ++/* Header Log Register 4 */ ++#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) ++ ++/* Root Error Command Register */ ++#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) ++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ ++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ ++#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ ++ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) ++ ++/* Root Error Status Register */ ++#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) ++#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ ++#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ ++#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ ++#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ ++#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ ++#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_RESR_AER_INT_MSG_NUM_S 27 ++ ++/* Error Source Indentification Register */ ++#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 ++ ++/* VC Enhanced Capability Header */ ++#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) ++ ++/* Port VC Capability Register */ ++#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) ++#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ ++#define PCIE_PVC1_EXT_VC_CNT_S 0 ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 ++#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ ++#define PCIE_PVC1_REF_CLK_S 8 ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 ++ ++/* Extended Virtual Channel Count Defintion */ ++#define PCIE_EXT_VC_CNT_MIN 0 ++#define PCIE_EXT_VC_CNT_MAX 7 ++ ++/* Port Arbitration Table Entry Size Definition */ ++enum { ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, ++}; ++ ++/* Port VC Capability Register 2 */ ++#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) ++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ ++#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_PVC2_VC_ARB_WRR 0x0000000F ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 ++ ++/* Port VC Control and Status Register */ ++#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) ++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ ++#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ ++#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 ++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ ++ ++/* VC0 Resource Capability Register */ ++#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) ++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ ++#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ ++ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ ++ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) ++ ++#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 ++ ++/* VC0 Resource Control Register */ ++#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) ++#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ ++#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ ++#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ ++#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ ++#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ ++#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ ++#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ ++#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ ++#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ ++ ++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 ++#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ ++#define PCIE_VC0_RC0_VC_ID_S 24 ++#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ ++ ++/* VC0 Resource Status Register */ ++#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) ++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ ++#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ ++ ++/* Ack Latency Timer and Replay Timer Register */ ++#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 ++ ++/* Other Message Register */ ++#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) ++ ++/* Port Force Link Register */ ++#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) ++#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ ++#define PCIE_PFLR_LINK_NUM_S 0 ++#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ ++#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ ++#define PCIE_PFLR_LINK_STATE_S 16 ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 ++ ++/* Ack Frequency Register */ ++#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) ++#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ ++#define PCIE_AFR_AF_S 0 ++#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ ++#define PCIE_AFR_FTS_NUM_S 8 ++#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ ++#define PCIE_AFR_COM_FTS_NUM_S 16 ++#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ ++#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 ++#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ ++#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 ++#define PCIE_AFR_FTS_NUM_DEFAULT 32 ++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 ++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 ++ ++/* Port Link Control Register */ ++#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) ++#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ ++#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ ++#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ ++#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ ++#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ ++#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ ++#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ ++#define PCIE_PLCR_LINK_MODE_S 16 ++#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ ++ ++/* Lane Skew Register */ ++#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) ++#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ ++#define PCIE_LSR_LANE_SKEW_NUM_S 0 ++#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ ++#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ ++#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ ++ ++/* Symbol Number Register */ ++#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) ++#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ ++#define PCIE_SNR_TS_S 0 ++#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ ++#define PCIE_SNR_SKP_S 8 ++#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ ++#define PCIE_SNR_REPLAY_TIMER_S 14 ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 ++#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ ++#define PCIE_SNR_FC_TIMER_S 28 ++ ++/* Symbol Timer Register and Filter Mask Register 1 */ ++#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) ++#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ ++#define PCIE_STRFMR_SKP_INTERVAL_S 0 ++#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ ++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ ++#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ ++#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ ++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ ++#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ ++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ ++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ ++#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ ++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ ++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ ++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ ++ ++#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ ++ ++/* Filter Masker Register 2 */ ++#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) ++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ ++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ ++ ++/* Debug Register 0 */ ++#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) ++ ++/* Debug Register 1 */ ++#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) ++ ++/* Transmit Posted FC Credit Status Register */ ++#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Non-Posted FC Credit Status */ ++#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Complete FC Credit Status Register */ ++#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 ++ ++/* Queue Status Register */ ++#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) ++#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ ++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ ++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ ++ ++/* VC Transmit Arbitration Register 1 */ ++#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) ++#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ ++ ++/* VC Transmit Arbitration Register 2 */ ++#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) ++#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ ++ ++/* VC0 Posted Receive Queue Control Register */ ++#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 ++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ ++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ ++ ++/* VC0 Non-Posted Receive Queue Control */ ++#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 ++ ++/* VC0 Completion Receive Queue Control */ ++#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 ++ ++/* Applicable to the above three registers */ ++enum { ++ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, ++ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, ++ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, ++}; ++ ++/* VC0 Posted Buffer Depth Register */ ++#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Non-Posted Buffer Depth Register */ ++#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Completion Buffer Depth Register */ ++#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 ++ ++/* PHY Status Register, all zeros in VR9 */ ++#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) ++ ++/* PHY Control Register, all zeros in VR9 */ ++#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) ++ ++/* ++ * PCIe PDI PHY register definition, suppose all the following ++ * stuff is confidential. ++ * XXX, detailed bit definition ++ */ ++#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) ++#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) ++#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) ++#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) ++#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) ++#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) ++#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) ++#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) ++#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) ++#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) ++#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) ++ ++#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) ++#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) ++#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) ++#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) ++#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) ++#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) ++#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) ++#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) ++ ++#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) ++#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) ++#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) ++#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) ++#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) ++#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) ++#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) ++ ++#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) ++#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) ++#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) ++#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) ++#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) ++ ++/* Interrupt related stuff */ ++#define PCIE_LEGACY_DISABLE 0 ++#define PCIE_LEGACY_INTA 1 ++#define PCIE_LEGACY_INTB 2 ++#define PCIE_LEGACY_INTC 3 ++#define PCIE_LEGACY_INTD 4 ++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD ++ ++#endif /* IFXMIPS_PCIE_REG_H */ ++ +--- /dev/null ++++ b/arch/mips/pci/ifxmips_pcie_vr9.h +@@ -0,0 +1,269 @@ ++/**************************************************************************** ++ Copyright (c) 2010 ++ Lantiq Deutschland GmbH ++ Am Campeon 3; 85579 Neubiberg, Germany ++ ++ For licensing information, see the file 'LICENSE' in the root folder of ++ this software module. ++ ++ *****************************************************************************/ ++/*! ++ \file ifxmips_pcie_vr9.h ++ \ingroup IFX_PCIE ++ \brief PCIe RC driver vr9 specific file ++*/ ++ ++#ifndef IFXMIPS_PCIE_VR9_H ++#define IFXMIPS_PCIE_VR9_H ++ ++#include <linux/types.h> ++#include <linux/delay.h> ++ ++#include <linux/gpio.h> ++#include <lantiq_soc.h> ++ ++#define IFX_PCIE_GPIO_RESET 494 ++ ++#define IFX_REG_R32 ltq_r32 ++#define IFX_REG_W32 ltq_w32 ++#define CONFIG_IFX_PCIE_HW_SWAP ++#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) ++#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) ++#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ ++ ++#define IFX_RCU (KSEG1 | 0x1F203000) ++#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ ++#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ ++#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ ++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++ ++#define IFX_PMU1_MODULE_PCIE_PHY (0) ++#define IFX_PMU1_MODULE_PCIE_CTRL (1) ++#define IFX_PMU1_MODULE_PDI (4) ++#define IFX_PMU1_MODULE_MSI (5) ++ ++#define IFX_PMU_MODULE_PCIE_L0_CLK (31) ++ ++ ++#define IFX_GPIO (KSEG1 | 0x1E100B00) ++#define ALT0 ((volatile u32*)(IFX_GPIO + 0x007c)) ++#define ALT1 ((volatile u32*)(IFX_GPIO + 0x0080)) ++#define OD ((volatile u32*)(IFX_GPIO + 0x0084)) ++#define DIR ((volatile u32*)(IFX_GPIO + 0x0078)) ++#define OUT ((volatile u32*)(IFX_GPIO + 0x0070)) ++ ++ ++static inline void pcie_ep_gpio_rst_init(int pcie_port) ++{ ++ ++ gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset"); ++ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); ++ gpio_set_value(IFX_PCIE_GPIO_RESET, 1); ++ ++/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++ ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/ ++} ++ ++static inline void pcie_ahb_pmu_setup(void) ++{ ++ /* Enable AHB bus master/slave */ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "ahb"); ++ clk_enable(clk); ++ ++ //AHBM_PMU_SETUP(IFX_PMU_ENABLE); ++ //AHBS_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_rcu_endian_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg |= IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#else ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg &= ~IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#endif /* CONFIG_IFX_PCIE_HW_SWAP */ ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); ++} ++ ++static inline void pcie_phy_pmu_enable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "phy"); ++ clk_enable(clk); ++ ++ //PCIE_PHY_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_phy_pmu_disable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "phy"); ++ clk_disable(clk); ++ ++// PCIE_PHY_PMU_SETUP(IFX_PMU_DISABLE); ++} ++ ++static inline void pcie_pdi_big_endian(int pcie_port) ++{ ++ u32 reg; ++ ++ /* SRAM2PDI endianness control. */ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++ /* Config AHB->PCIe and PDI endianness */ ++ reg |= IFX_RCU_AHB_BE_PCIE_PDI; ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++} ++ ++static inline void pcie_pdi_pmu_enable(int pcie_port) ++{ ++ /* Enable PDI to access PCIe PHY register */ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "pdi"); ++ clk_enable(clk); ++ //PDI_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_core_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ ++ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ ++ reg |= 0x00400000; ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_core_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ /* Reset PCIe PHY & Core, bit 22 */ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg &= ~0x00400000; ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg |= 0x00001000; /* Bit 12 */ ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg &= ~0x00001000; /* Bit 12 */ ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_device_rst_assert(int pcie_port) ++{ ++ gpio_set_value(IFX_PCIE_GPIO_RESET, 0); ++// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++} ++ ++static inline void pcie_device_rst_deassert(int pcie_port) ++{ ++ mdelay(100); ++ gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); ++// gpio_set_value(IFX_PCIE_GPIO_RESET, 1); ++ //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++} ++ ++static inline void pcie_core_pmu_setup(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("1d900000.pcie", "ctl"); ++ clk_enable(clk); ++ clk = clk_get_sys("1d900000.pcie", "bus"); ++ clk_enable(clk); ++ ++ /* PCIe Core controller enabled */ ++// PCIE_CTRL_PMU_SETUP(IFX_PMU_ENABLE); ++ ++ /* Enable PCIe L0 Clock */ ++// PCIE_L0_CLK_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline void pcie_msi_init(int pcie_port) ++{ ++ struct clk *clk; ++ pcie_msi_pic_init(pcie_port); ++ clk = clk_get_sys("ltq_pcie", "msi"); ++ clk_enable(clk); ++// MSI_PMU_SETUP(IFX_PMU_ENABLE); ++} ++ ++static inline u32 ++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) ++{ ++ u32 tbus_number = bus_number; ++ ++#ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tbus_number -= pcibios_1st_host_bus_nr(); ++ } ++#endif /* CONFIG_PCI_LANTIQ */ ++ return tbus_number; ++} ++ ++static inline u32 ++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) ++{ ++ struct pci_dev *pdev; ++ u32 tvalue = value; ++ ++ /* Sanity check */ ++ pdev = pci_get_slot(bus, devfn); ++ if (pdev == NULL) { ++ return tvalue; ++ } ++ ++ /* Only care about PCI bridge */ ++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { ++ return tvalue; ++ } ++ ++ if (read) { /* Read hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); ++ } ++ #endif /* CONFIG_PCI_LANTIQ */ ++ } ++ else { /* Write hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); ++ } ++ #endif ++ } ++ return tvalue; ++} ++ ++#endif /* IFXMIPS_PCIE_VR9_H */ ++ +--- a/arch/mips/pci/pci-legacy.c ++++ b/arch/mips/pci/pci-legacy.c +@@ -300,3 +300,30 @@ char *__init pcibios_setup(char *str) + return pcibios_plat_setup(str); + return str; + } ++ ++int pcibios_host_nr(void) ++{ ++ int count = 0; ++ struct pci_controller *hose; ++ list_for_each_entry(hose, &controllers, list) { ++ count++; ++ } ++ return count; ++} ++EXPORT_SYMBOL(pcibios_host_nr); ++ ++int pcibios_1st_host_bus_nr(void) ++{ ++ int bus_nr = 0; ++ struct pci_controller *hose; ++ ++ hose = list_first_entry_or_null(&controllers, struct pci_controller, list); ++ ++ if (hose != NULL) { ++ if (hose->bus != NULL) { ++ bus_nr = hose->bus->number + 1; ++ } ++ } ++ return bus_nr; ++} ++EXPORT_SYMBOL(pcibios_1st_host_bus_nr); +--- /dev/null ++++ b/arch/mips/pci/pcie-lantiq.h +@@ -0,0 +1,1305 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifxmips_pcie_reg.h ++** PROJECT : IFX UEIP for VRX200 ++** MODULES : PCIe module ++** ++** DATE : 02 Mar 2009 ++** AUTHOR : Lei Chuanhua ++** DESCRIPTION : PCIe Root Complex Driver ++** COPYRIGHT : Copyright (c) 2009 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** HISTORY ++** $Version $Date $Author $Comment ++** 0.0.1 17 Mar,2009 Lei Chuanhua Initial version ++*******************************************************************************/ ++#ifndef IFXMIPS_PCIE_REG_H ++#define IFXMIPS_PCIE_REG_H ++#include <linux/version.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/interrupt.h> ++/*! ++ \file ifxmips_pcie_reg.h ++ \ingroup IFX_PCIE ++ \brief header file for PCIe module register definition ++*/ ++/* PCIe Address Mapping Base */ ++#define PCIE_CFG_PHY_BASE 0x1D000000UL ++#define PCIE_CFG_BASE (KSEG1 + PCIE_CFG_PHY_BASE) ++#define PCIE_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE_MEM_PHY_BASE 0x1C000000UL ++#define PCIE_MEM_BASE (KSEG1 + PCIE_MEM_PHY_BASE) ++#define PCIE_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE_MEM_PHY_END (PCIE_MEM_PHY_BASE + PCIE_MEM_SIZE - 1) ++ ++#define PCIE_IO_PHY_BASE 0x1D800000UL ++#define PCIE_IO_BASE (KSEG1 + PCIE_IO_PHY_BASE) ++#define PCIE_IO_SIZE (1 * 1024 * 1024) ++#define PCIE_IO_PHY_END (PCIE_IO_PHY_BASE + PCIE_IO_SIZE - 1) ++ ++#define PCIE_RC_CFG_BASE (KSEG1 + 0x1D900000) ++#define PCIE_APP_LOGIC_REG (KSEG1 + 0x1E100900) ++#define PCIE_MSI_PHY_BASE 0x1F600000UL ++ ++#define PCIE_PDI_PHY_BASE 0x1F106800UL ++#define PCIE_PDI_BASE (KSEG1 + PCIE_PDI_PHY_BASE) ++#define PCIE_PDI_SIZE 0x400 ++ ++#define PCIE1_CFG_PHY_BASE 0x19000000UL ++#define PCIE1_CFG_BASE (KSEG1 + PCIE1_CFG_PHY_BASE) ++#define PCIE1_CFG_SIZE (8 * 1024 * 1024) ++ ++#define PCIE1_MEM_PHY_BASE 0x18000000UL ++#define PCIE1_MEM_BASE (KSEG1 + PCIE1_MEM_PHY_BASE) ++#define PCIE1_MEM_SIZE (16 * 1024 * 1024) ++#define PCIE1_MEM_PHY_END (PCIE1_MEM_PHY_BASE + PCIE1_MEM_SIZE - 1) ++ ++#define PCIE1_IO_PHY_BASE 0x19800000UL ++#define PCIE1_IO_BASE (KSEG1 + PCIE1_IO_PHY_BASE) ++#define PCIE1_IO_SIZE (1 * 1024 * 1024) ++#define PCIE1_IO_PHY_END (PCIE1_IO_PHY_BASE + PCIE1_IO_SIZE - 1) ++ ++#define PCIE1_RC_CFG_BASE (KSEG1 + 0x19900000) ++#define PCIE1_APP_LOGIC_REG (KSEG1 + 0x1E100700) ++#define PCIE1_MSI_PHY_BASE 0x1F400000UL ++ ++#define PCIE1_PDI_PHY_BASE 0x1F700400UL ++#define PCIE1_PDI_BASE (KSEG1 + PCIE1_PDI_PHY_BASE) ++#define PCIE1_PDI_SIZE 0x400 ++ ++#define PCIE_CFG_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_CFG_BASE) : (PCIE_CFG_BASE)) ++#define PCIE_MEM_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_BASE) : (PCIE_MEM_BASE)) ++#define PCIE_IO_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_BASE) : (PCIE_IO_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_MEM_PHY_BASE) : (PCIE_MEM_PHY_BASE)) ++#define PCIE_MEM_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_MEM_PHY_END) : (PCIE_MEM_PHY_END)) ++#define PCIE_IO_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_IO_PHY_BASE) : (PCIE_IO_PHY_BASE)) ++#define PCIE_IO_PHY_PORT_TO_END(X) ((X) > 0 ? (PCIE1_IO_PHY_END) : (PCIE_IO_PHY_END)) ++#define PCIE_APP_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_APP_LOGIC_REG) : (PCIE_APP_LOGIC_REG)) ++#define PCIE_RC_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_RC_CFG_BASE) : (PCIE_RC_CFG_BASE)) ++#define PCIE_PHY_PORT_TO_BASE(X) ((X) > 0 ? (PCIE1_PDI_BASE) : (PCIE_PDI_BASE)) ++ ++/* PCIe Application Logic Register */ ++/* RC Core Control Register */ ++#define PCIE_RC_CCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x10) ++/* This should be enabled after initializing configuratin registers ++ * Also should check link status retraining bit ++ */ ++#define PCIE_RC_CCR_LTSSM_ENABLE 0x00000001 /* Enable LTSSM to continue link establishment */ ++ ++/* RC Core Debug Register */ ++#define PCIE_RC_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x14) ++#define PCIE_RC_DR_DLL_UP 0x00000001 /* Data Link Layer Up */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE 0x0000000E /* Current Power State */ ++#define PCIE_RC_DR_CURRENT_POWER_STATE_S 1 ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE 0x000001F0 /* Current LTSSM State */ ++#define PCIE_RC_DR_CURRENT_LTSSM_STATE_S 4 ++ ++#define PCIE_RC_DR_PM_DEV_STATE 0x00000E00 /* Power Management D-State */ ++#define PCIE_RC_DR_PM_DEV_STATE_S 9 ++ ++#define PCIE_RC_DR_PM_ENABLED 0x00001000 /* Power Management State from PMU */ ++#define PCIE_RC_DR_PME_EVENT_ENABLED 0x00002000 /* Power Management Event Enable State */ ++#define PCIE_RC_DR_AUX_POWER_ENABLED 0x00004000 /* Auxiliary Power Enable */ ++ ++/* Current Power State Definition */ ++enum { ++ PCIE_RC_DR_D0 = 0, ++ PCIE_RC_DR_D1, /* Not supported */ ++ PCIE_RC_DR_D2, /* Not supported */ ++ PCIE_RC_DR_D3, ++ PCIE_RC_DR_UN, ++}; ++ ++/* PHY Link Status Register */ ++#define PCIE_PHY_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x18) ++#define PCIE_PHY_SR_PHY_LINK_UP 0x00000001 /* PHY Link Up/Down Indicator */ ++ ++/* Electromechanical Control Register */ ++#define PCIE_EM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x1C) ++#define PCIE_EM_CR_CARD_IS_PRESENT 0x00000001 /* Card Presence Detect State */ ++#define PCIE_EM_CR_MRL_OPEN 0x00000002 /* MRL Sensor State */ ++#define PCIE_EM_CR_POWER_FAULT_SET 0x00000004 /* Power Fault Detected */ ++#define PCIE_EM_CR_MRL_SENSOR_SET 0x00000008 /* MRL Sensor Changed */ ++#define PCIE_EM_CR_PRESENT_DETECT_SET 0x00000010 /* Card Presense Detect Changed */ ++#define PCIE_EM_CR_CMD_CPL_INT_SET 0x00000020 /* Command Complete Interrupt */ ++#define PCIE_EM_CR_SYS_INTERLOCK_SET 0x00000040 /* System Electromechanical IterLock Engaged */ ++#define PCIE_EM_CR_ATTENTION_BUTTON_SET 0x00000080 /* Attention Button Pressed */ ++ ++/* Interrupt Status Register */ ++#define PCIE_IR_SR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x20) ++#define PCIE_IR_SR_PME_CAUSE_MSI 0x00000002 /* MSI caused by PME */ ++#define PCIE_IR_SR_HP_PME_WAKE_GEN 0x00000004 /* Hotplug PME Wake Generation */ ++#define PCIE_IR_SR_HP_MSI 0x00000008 /* Hotplug MSI */ ++#define PCIE_IR_SR_AHB_LU_ERR 0x00000030 /* AHB Bridge Lookup Error Signals */ ++#define PCIE_IR_SR_AHB_LU_ERR_S 4 ++#define PCIE_IR_SR_INT_MSG_NUM 0x00003E00 /* Interrupt Message Number */ ++#define PCIE_IR_SR_INT_MSG_NUM_S 9 ++#define PCIE_IR_SR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_IR_SR_AER_INT_MSG_NUM_S 27 ++ ++/* Message Control Register */ ++#define PCIE_MSG_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x30) ++#define PCIE_MSG_CR_GEN_PME_TURN_OFF_MSG 0x00000001 /* Generate PME Turn Off Message */ ++#define PCIE_MSG_CR_GEN_UNLOCK_MSG 0x00000002 /* Generate Unlock Message */ ++ ++#define PCIE_VDM_DR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x34) ++ ++/* Vendor-Defined Message Requester ID Register */ ++#define PCIE_VDM_RID(X) (PCIE_APP_PORT_TO_BASE (X) + 0x38) ++#define PCIE_VDM_RID_VENROR_MSG_REQ_ID 0x0000FFFF ++#define PCIE_VDM_RID_VDMRID_S 0 ++ ++/* ASPM Control Register */ ++#define PCIE_ASPM_CR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x40) ++#define PCIE_ASPM_CR_HOT_RST 0x00000001 /* Hot Reset Request to the downstream device */ ++#define PCIE_ASPM_CR_REQ_EXIT_L1 0x00000002 /* Request to Exit L1 */ ++#define PCIE_ASPM_CR_REQ_ENTER_L1 0x00000004 /* Request to Enter L1 */ ++ ++/* Vendor Message DW0 Register */ ++#define PCIE_VM_MSG_DW0(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x50) ++#define PCIE_VM_MSG_DW0_TYPE 0x0000001F /* Message type */ ++#define PCIE_VM_MSG_DW0_TYPE_S 0 ++#define PCIE_VM_MSG_DW0_FORMAT 0x00000060 /* Format */ ++#define PCIE_VM_MSG_DW0_FORMAT_S 5 ++#define PCIE_VM_MSG_DW0_TC 0x00007000 /* Traffic Class */ ++#define PCIE_VM_MSG_DW0_TC_S 12 ++#define PCIE_VM_MSG_DW0_ATTR 0x000C0000 /* Atrributes */ ++#define PCIE_VM_MSG_DW0_ATTR_S 18 ++#define PCIE_VM_MSG_DW0_EP_TLP 0x00100000 /* Poisoned TLP */ ++#define PCIE_VM_MSG_DW0_TD 0x00200000 /* TLP Digest */ ++#define PCIE_VM_MSG_DW0_LEN 0xFFC00000 /* Length */ ++#define PCIE_VM_MSG_DW0_LEN_S 22 ++ ++/* Format Definition */ ++enum { ++ PCIE_VM_MSG_FORMAT_00 = 0, /* 3DW Hdr, no data*/ ++ PCIE_VM_MSG_FORMAT_01, /* 4DW Hdr, no data */ ++ PCIE_VM_MSG_FORMAT_10, /* 3DW Hdr, with data */ ++ PCIE_VM_MSG_FORMAT_11, /* 4DW Hdr, with data */ ++}; ++ ++/* Traffic Class Definition */ ++enum { ++ PCIE_VM_MSG_TC0 = 0, ++ PCIE_VM_MSG_TC1, ++ PCIE_VM_MSG_TC2, ++ PCIE_VM_MSG_TC3, ++ PCIE_VM_MSG_TC4, ++ PCIE_VM_MSG_TC5, ++ PCIE_VM_MSG_TC6, ++ PCIE_VM_MSG_TC7, ++}; ++ ++/* Attributes Definition */ ++enum { ++ PCIE_VM_MSG_ATTR_00 = 0, /* RO and No Snoop cleared */ ++ PCIE_VM_MSG_ATTR_01, /* RO cleared , No Snoop set */ ++ PCIE_VM_MSG_ATTR_10, /* RO set, No Snoop cleared*/ ++ PCIE_VM_MSG_ATTR_11, /* RO and No Snoop set */ ++}; ++ ++/* Payload Size Definition */ ++#define PCIE_VM_MSG_LEN_MIN 0 ++#define PCIE_VM_MSG_LEN_MAX 1024 ++ ++/* Vendor Message DW1 Register */ ++#define PCIE_VM_MSG_DW1(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x54) ++#define PCIE_VM_MSG_DW1_FUNC_NUM 0x00000070 /* Function Number */ ++#define PCIE_VM_MSG_DW1_FUNC_NUM_S 8 ++#define PCIE_VM_MSG_DW1_CODE 0x00FF0000 /* Message Code */ ++#define PCIE_VM_MSG_DW1_CODE_S 16 ++#define PCIE_VM_MSG_DW1_TAG 0xFF000000 /* Tag */ ++#define PCIE_VM_MSG_DW1_TAG_S 24 ++ ++#define PCIE_VM_MSG_DW2(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x58) ++#define PCIE_VM_MSG_DW3(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x5C) ++ ++/* Vendor Message Request Register */ ++#define PCIE_VM_MSG_REQR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x60) ++#define PCIE_VM_MSG_REQR_REQ 0x00000001 /* Vendor Message Request */ ++ ++ ++/* AHB Slave Side Band Control Register */ ++#define PCIE_AHB_SSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x70) ++#define PCIE_AHB_SSB_REQ_BCM 0x00000001 /* Slave Reques BCM filed */ ++#define PCIE_AHB_SSB_REQ_EP 0x00000002 /* Slave Reques EP filed */ ++#define PCIE_AHB_SSB_REQ_TD 0x00000004 /* Slave Reques TD filed */ ++#define PCIE_AHB_SSB_REQ_ATTR 0x00000018 /* Slave Reques Attribute number */ ++#define PCIE_AHB_SSB_REQ_ATTR_S 3 ++#define PCIE_AHB_SSB_REQ_TC 0x000000E0 /* Slave Request TC Field */ ++#define PCIE_AHB_SSB_REQ_TC_S 5 ++ ++/* AHB Master SideBand Ctrl Register */ ++#define PCIE_AHB_MSB(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x74) ++#define PCIE_AHB_MSB_RESP_ATTR 0x00000003 /* Master Response Attribute number */ ++#define PCIE_AHB_MSB_RESP_ATTR_S 0 ++#define PCIE_AHB_MSB_RESP_BAD_EOT 0x00000004 /* Master Response Badeot filed */ ++#define PCIE_AHB_MSB_RESP_BCM 0x00000008 /* Master Response BCM filed */ ++#define PCIE_AHB_MSB_RESP_EP 0x00000010 /* Master Response EP filed */ ++#define PCIE_AHB_MSB_RESP_TD 0x00000020 /* Master Response TD filed */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM 0x000003C0 /* Master Response Function number */ ++#define PCIE_AHB_MSB_RESP_FUN_NUM_S 6 ++ ++/* AHB Control Register, fixed bus enumeration exception */ ++#define PCIE_AHB_CTRL(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0x78) ++#define PCIE_AHB_CTRL_BUS_ERROR_SUPPRESS 0x00000001 ++ ++/* Interrupt Enalbe Register */ ++#define PCIE_IRNEN(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF4) ++#define PCIE_IRNCR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xF8) ++#define PCIE_IRNICR(X) (volatile u32*)(PCIE_APP_PORT_TO_BASE(X) + 0xFC) ++ ++/* PCIe interrupt enable/control/capture register definition */ ++#define PCIE_IRN_AER_REPORT 0x00000001 /* AER Interrupt */ ++#define PCIE_IRN_AER_MSIX 0x00000002 /* Advanced Error MSI-X Interrupt */ ++#define PCIE_IRN_PME 0x00000004 /* PME Interrupt */ ++#define PCIE_IRN_HOTPLUG 0x00000008 /* Hotplug Interrupt */ ++#define PCIE_IRN_RX_VDM_MSG 0x00000010 /* Vendor-Defined Message Interrupt */ ++#define PCIE_IRN_RX_CORRECTABLE_ERR_MSG 0x00000020 /* Correctable Error Message Interrupt */ ++#define PCIE_IRN_RX_NON_FATAL_ERR_MSG 0x00000040 /* Non-fatal Error Message */ ++#define PCIE_IRN_RX_FATAL_ERR_MSG 0x00000080 /* Fatal Error Message */ ++#define PCIE_IRN_RX_PME_MSG 0x00000100 /* PME Message Interrupt */ ++#define PCIE_IRN_RX_PME_TURNOFF_ACK 0x00000200 /* PME Turnoff Ack Message Interrupt */ ++#define PCIE_IRN_AHB_BR_FATAL_ERR 0x00000400 /* AHB Fatal Error Interrupt */ ++#define PCIE_IRN_LINK_AUTO_BW_STATUS 0x00000800 /* Link Auto Bandwidth Status Interrupt */ ++#define PCIE_IRN_BW_MGT 0x00001000 /* Bandwidth Managment Interrupt */ ++#define PCIE_IRN_INTA 0x00002000 /* INTA */ ++#define PCIE_IRN_INTB 0x00004000 /* INTB */ ++#define PCIE_IRN_INTC 0x00008000 /* INTC */ ++#define PCIE_IRN_INTD 0x00010000 /* INTD */ ++#define PCIE_IRN_WAKEUP 0x00020000 /* Wake up Interrupt */ ++ ++#define PCIE_RC_CORE_COMBINED_INT (PCIE_IRN_AER_REPORT | PCIE_IRN_AER_MSIX | PCIE_IRN_PME | \ ++ PCIE_IRN_HOTPLUG | PCIE_IRN_RX_VDM_MSG | PCIE_IRN_RX_CORRECTABLE_ERR_MSG |\ ++ PCIE_IRN_RX_NON_FATAL_ERR_MSG | PCIE_IRN_RX_FATAL_ERR_MSG | \ ++ PCIE_IRN_RX_PME_MSG | PCIE_IRN_RX_PME_TURNOFF_ACK | PCIE_IRN_AHB_BR_FATAL_ERR | \ ++ PCIE_IRN_LINK_AUTO_BW_STATUS | PCIE_IRN_BW_MGT) ++/* PCIe RC Configuration Register */ ++#define PCIE_VDID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x00) ++ ++/* Bit definition from pci_reg.h */ ++#define PCIE_PCICMDSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x04) ++#define PCIE_CCRID(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x08) ++#define PCIE_CLSLTHTBR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x0C) /* EP only */ ++/* BAR0, BAR1,Only necessary if the bridges implements a device-specific register set or memory buffer */ ++#define PCIE_BAR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10) /* Not used*/ ++#define PCIE_BAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14) /* Not used */ ++ ++#define PCIE_BNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x18) /* Mandatory */ ++/* Bus Number Register bits */ ++#define PCIE_BNR_PRIMARY_BUS_NUM 0x000000FF ++#define PCIE_BNR_PRIMARY_BUS_NUM_S 0 ++#define PCIE_PNR_SECONDARY_BUS_NUM 0x0000FF00 ++#define PCIE_PNR_SECONDARY_BUS_NUM_S 8 ++#define PCIE_PNR_SUB_BUS_NUM 0x00FF0000 ++#define PCIE_PNR_SUB_BUS_NUM_S 16 ++ ++/* IO Base/Limit Register bits */ ++#define PCIE_IOBLSECS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x1C) /* RC only */ ++#define PCIE_IOBLSECS_32BIT_IO_ADDR 0x00000001 ++#define PCIE_IOBLSECS_IO_BASE_ADDR 0x000000F0 ++#define PCIE_IOBLSECS_IO_BASE_ADDR_S 4 ++#define PCIE_IOBLSECS_32BIT_IOLIMT 0x00000100 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR 0x0000F000 ++#define PCIE_IOBLSECS_IO_LIMIT_ADDR_S 12 ++ ++/* Non-prefetchable Memory Base/Limit Register bit */ ++#define PCIE_MBML(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x20) /* RC only */ ++#define PCIE_MBML_MEM_BASE_ADDR 0x0000FFF0 ++#define PCIE_MBML_MEM_BASE_ADDR_S 4 ++#define PCIE_MBML_MEM_LIMIT_ADDR 0xFFF00000 ++#define PCIE_MBML_MEM_LIMIT_ADDR_S 20 ++ ++/* Prefetchable Memory Base/Limit Register bit */ ++#define PCIE_PMBL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x24) /* RC only */ ++#define PCIE_PMBL_64BIT_ADDR 0x00000001 ++#define PCIE_PMBL_UPPER_12BIT 0x0000FFF0 ++#define PCIE_PMBL_UPPER_12BIT_S 4 ++#define PCIE_PMBL_E64MA 0x00010000 ++#define PCIE_PMBL_END_ADDR 0xFFF00000 ++#define PCIE_PMBL_END_ADDR_S 20 ++#define PCIE_PMBU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x28) /* RC only */ ++#define PCIE_PMLU32(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x2C) /* RC only */ ++ ++/* I/O Base/Limit Upper 16 bits register */ ++#define PCIE_IO_BANDL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x30) /* RC only */ ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE 0x0000FFFF ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_BASE_S 0 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT 0xFFFF0000 ++#define PCIE_IO_BANDL_UPPER_16BIT_IO_LIMIT_S 16 ++ ++#define PCIE_CPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x34) ++#define PCIE_EBBAR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x38) ++ ++/* Interrupt and Secondary Bridge Control Register */ ++#define PCIE_INTRBCTRL(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x3C) ++ ++#define PCIE_INTRBCTRL_INT_LINE 0x000000FF ++#define PCIE_INTRBCTRL_INT_LINE_S 0 ++#define PCIE_INTRBCTRL_INT_PIN 0x0000FF00 ++#define PCIE_INTRBCTRL_INT_PIN_S 8 ++#define PCIE_INTRBCTRL_PARITY_ERR_RESP_ENABLE 0x00010000 /* #PERR */ ++#define PCIE_INTRBCTRL_SERR_ENABLE 0x00020000 /* #SERR */ ++#define PCIE_INTRBCTRL_ISA_ENABLE 0x00040000 /* ISA enable, IO 64KB only */ ++#define PCIE_INTRBCTRL_VGA_ENABLE 0x00080000 /* VGA enable */ ++#define PCIE_INTRBCTRL_VGA_16BIT_DECODE 0x00100000 /* VGA 16bit decode */ ++#define PCIE_INTRBCTRL_RST_SECONDARY_BUS 0x00400000 /* Secondary bus rest, hot rest, 1ms */ ++/* Others are read only */ ++enum { ++ PCIE_INTRBCTRL_INT_NON = 0, ++ PCIE_INTRBCTRL_INTA, ++ PCIE_INTRBCTRL_INTB, ++ PCIE_INTRBCTRL_INTC, ++ PCIE_INTRBCTRL_INTD, ++}; ++ ++#define PCIE_PM_CAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x40) ++ ++/* Power Management Control and Status Register */ ++#define PCIE_PM_CSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x44) ++ ++#define PCIE_PM_CSR_POWER_STATE 0x00000003 /* Power State */ ++#define PCIE_PM_CSR_POWER_STATE_S 0 ++#define PCIE_PM_CSR_SW_RST 0x00000008 /* Soft Reset Enabled */ ++#define PCIE_PM_CSR_PME_ENABLE 0x00000100 /* PME Enable */ ++#define PCIE_PM_CSR_PME_STATUS 0x00008000 /* PME status */ ++ ++/* MSI Capability Register for EP */ ++#define PCIE_MCAPR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x50) ++ ++#define PCIE_MCAPR_MSI_CAP_ID 0x000000FF /* MSI Capability ID */ ++#define PCIE_MCAPR_MSI_CAP_ID_S 0 ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_MCAPR_MSI_NEXT_CAP_PTR_S 8 ++#define PCIE_MCAPR_MSI_ENABLE 0x00010000 /* MSI Enable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP 0x000E0000 /* Multiple Message Capable */ ++#define PCIE_MCAPR_MULTI_MSG_CAP_S 17 ++#define PCIE_MCAPR_MULTI_MSG_ENABLE 0x00700000 /* Multiple Message Enable */ ++#define PCIE_MCAPR_MULTI_MSG_ENABLE_S 20 ++#define PCIE_MCAPR_ADDR64_CAP 0X00800000 /* 64-bit Address Capable */ ++ ++/* MSI Message Address Register */ ++#define PCIE_MA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x54) ++ ++#define PCIE_MA_ADDR_MASK 0xFFFFFFFC /* Message Address */ ++ ++/* MSI Message Upper Address Register */ ++#define PCIE_MUA(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x58) ++ ++/* MSI Message Data Register */ ++#define PCIE_MD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x5C) ++ ++#define PCIE_MD_DATA 0x0000FFFF /* Message Data */ ++#define PCIE_MD_DATA_S 0 ++ ++/* PCI Express Capability Register */ ++#define PCIE_XCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70) ++ ++#define PCIE_XCAP_ID 0x000000FF /* PCI Express Capability ID */ ++#define PCIE_XCAP_ID_S 0 ++#define PCIE_XCAP_NEXT_CAP 0x0000FF00 /* Next Capability Pointer */ ++#define PCIE_XCAP_NEXT_CAP_S 8 ++#define PCIE_XCAP_VER 0x000F0000 /* PCI Express Capability Version */ ++#define PCIE_XCAP_VER_S 16 ++#define PCIE_XCAP_DEV_PORT_TYPE 0x00F00000 /* Device Port Type */ ++#define PCIE_XCAP_DEV_PORT_TYPE_S 20 ++#define PCIE_XCAP_SLOT_IMPLEMENTED 0x01000000 /* Slot Implemented */ ++#define PCIE_XCAP_MSG_INT_NUM 0x3E000000 /* Interrupt Message Number */ ++#define PCIE_XCAP_MSG_INT_NUM_S 25 ++ ++/* Device Capability Register */ ++#define PCIE_DCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74) ++ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE 0x00000007 /* Max Payload size */ ++#define PCIE_DCAP_MAX_PAYLOAD_SIZE_S 0 ++#define PCIE_DCAP_PHANTOM_FUNC 0x00000018 /* Phanton Function, not supported */ ++#define PCIE_DCAP_PHANTOM_FUNC_S 3 ++#define PCIE_DCAP_EXT_TAG 0x00000020 /* Extended Tag Field */ ++#define PCIE_DCAP_EP_L0S_LATENCY 0x000001C0 /* EP L0s latency only */ ++#define PCIE_DCAP_EP_L0S_LATENCY_S 6 ++#define PCIE_DCAP_EP_L1_LATENCY 0x00000E00 /* EP L1 latency only */ ++#define PCIE_DCAP_EP_L1_LATENCY_S 9 ++#define PCIE_DCAP_ROLE_BASE_ERR_REPORT 0x00008000 /* Role Based ERR */ ++ ++/* Maximum payload size supported */ ++enum { ++ PCIE_MAX_PAYLOAD_128 = 0, ++ PCIE_MAX_PAYLOAD_256, ++ PCIE_MAX_PAYLOAD_512, ++ PCIE_MAX_PAYLOAD_1024, ++ PCIE_MAX_PAYLOAD_2048, ++ PCIE_MAX_PAYLOAD_4096, ++}; ++ ++/* Device Control and Status Register */ ++#define PCIE_DCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x78) ++ ++#define PCIE_DCTLSTS_CORRECTABLE_ERR_EN 0x00000001 /* COR-ERR */ ++#define PCIE_DCTLSTS_NONFATAL_ERR_EN 0x00000002 /* Non-fatal ERR */ ++#define PCIE_DCTLSTS_FATAL_ERR_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_DCTLSYS_UR_REQ_EN 0x00000008 /* UR ERR */ ++#define PCIE_DCTLSTS_RELAXED_ORDERING_EN 0x00000010 /* Enable relaxing ordering */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE 0x000000E0 /* Max payload mask */ ++#define PCIE_DCTLSTS_MAX_PAYLOAD_SIZE_S 5 ++#define PCIE_DCTLSTS_EXT_TAG_EN 0x00000100 /* Extended tag field */ ++#define PCIE_DCTLSTS_PHANTOM_FUNC_EN 0x00000200 /* Phantom Function Enable */ ++#define PCIE_DCTLSTS_AUX_PM_EN 0x00000400 /* AUX Power PM Enable */ ++#define PCIE_DCTLSTS_NO_SNOOP_EN 0x00000800 /* Enable no snoop, except root port*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE 0x00007000 /* Max Read Request size*/ ++#define PCIE_DCTLSTS_MAX_READ_SIZE_S 12 ++#define PCIE_DCTLSTS_CORRECTABLE_ERR 0x00010000 /* COR-ERR Detected */ ++#define PCIE_DCTLSTS_NONFATAL_ERR 0x00020000 /* Non-Fatal ERR Detected */ ++#define PCIE_DCTLSTS_FATAL_ER 0x00040000 /* Fatal ERR Detected */ ++#define PCIE_DCTLSTS_UNSUPPORTED_REQ 0x00080000 /* UR Detected */ ++#define PCIE_DCTLSTS_AUX_POWER 0x00100000 /* Aux Power Detected */ ++#define PCIE_DCTLSTS_TRANSACT_PENDING 0x00200000 /* Transaction pending */ ++ ++#define PCIE_DCTLSTS_ERR_EN (PCIE_DCTLSTS_CORRECTABLE_ERR_EN | \ ++ PCIE_DCTLSTS_NONFATAL_ERR_EN | PCIE_DCTLSTS_FATAL_ERR_EN | \ ++ PCIE_DCTLSYS_UR_REQ_EN) ++ ++/* Link Capability Register */ ++#define PCIE_LCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7C) ++#define PCIE_LCAP_MAX_LINK_SPEED 0x0000000F /* Max link speed, 0x1 by default */ ++#define PCIE_LCAP_MAX_LINK_SPEED_S 0 ++#define PCIE_LCAP_MAX_LENGTH_WIDTH 0x000003F0 /* Maxium Length Width */ ++#define PCIE_LCAP_MAX_LENGTH_WIDTH_S 4 ++#define PCIE_LCAP_ASPM_LEVEL 0x00000C00 /* Active State Link PM Support */ ++#define PCIE_LCAP_ASPM_LEVEL_S 10 ++#define PCIE_LCAP_L0S_EIXT_LATENCY 0x00007000 /* L0s Exit Latency */ ++#define PCIE_LCAP_L0S_EIXT_LATENCY_S 12 ++#define PCIE_LCAP_L1_EXIT_LATENCY 0x00038000 /* L1 Exit Latency */ ++#define PCIE_LCAP_L1_EXIT_LATENCY_S 15 ++#define PCIE_LCAP_CLK_PM 0x00040000 /* Clock Power Management */ ++#define PCIE_LCAP_SDER 0x00080000 /* Surprise Down Error Reporting */ ++#define PCIE_LCAP_DLL_ACTIVE_REPROT 0x00100000 /* Data Link Layer Active Reporting Capable */ ++#define PCIE_LCAP_PORT_NUM 0xFF0000000 /* Port number */ ++#define PCIE_LCAP_PORT_NUM_S 24 ++ ++/* Maximum Length width definition */ ++#define PCIE_MAX_LENGTH_WIDTH_RES 0x00 ++#define PCIE_MAX_LENGTH_WIDTH_X1 0x01 /* Default */ ++#define PCIE_MAX_LENGTH_WIDTH_X2 0x02 ++#define PCIE_MAX_LENGTH_WIDTH_X4 0x04 ++#define PCIE_MAX_LENGTH_WIDTH_X8 0x08 ++#define PCIE_MAX_LENGTH_WIDTH_X12 0x0C ++#define PCIE_MAX_LENGTH_WIDTH_X16 0x10 ++#define PCIE_MAX_LENGTH_WIDTH_X32 0x20 ++ ++/* Active State Link PM definition */ ++enum { ++ PCIE_ASPM_RES0 = 0, ++ PCIE_ASPM_L0S_ENTRY_SUPPORT, /* L0s */ ++ PCIE_ASPM_RES1, ++ PCIE_ASPM_L0S_L1_ENTRY_SUPPORT, /* L0s and L1, default */ ++}; ++ ++/* L0s Exit Latency definition */ ++enum { ++ PCIE_L0S_EIXT_LATENCY_L64NS = 0, /* < 64 ns */ ++ PCIE_L0S_EIXT_LATENCY_B64A128, /* > 64 ns < 128 ns */ ++ PCIE_L0S_EIXT_LATENCY_B128A256, /* > 128 ns < 256 ns */ ++ PCIE_L0S_EIXT_LATENCY_B256A512, /* > 256 ns < 512 ns */ ++ PCIE_L0S_EIXT_LATENCY_B512TO1U, /* > 512 ns < 1 us */ ++ PCIE_L0S_EIXT_LATENCY_B1A2U, /* > 1 us < 2 us */ ++ PCIE_L0S_EIXT_LATENCY_B2A4U, /* > 2 us < 4 us */ ++ PCIE_L0S_EIXT_LATENCY_M4US, /* > 4 us */ ++}; ++ ++/* L1 Exit Latency definition */ ++enum { ++ PCIE_L1_EXIT_LATENCY_L1US = 0, /* < 1 us */ ++ PCIE_L1_EXIT_LATENCY_B1A2, /* > 1 us < 2 us */ ++ PCIE_L1_EXIT_LATENCY_B2A4, /* > 2 us < 4 us */ ++ PCIE_L1_EXIT_LATENCY_B4A8, /* > 4 us < 8 us */ ++ PCIE_L1_EXIT_LATENCY_B8A16, /* > 8 us < 16 us */ ++ PCIE_L1_EXIT_LATENCY_B16A32, /* > 16 us < 32 us */ ++ PCIE_L1_EXIT_LATENCY_B32A64, /* > 32 us < 64 us */ ++ PCIE_L1_EXIT_LATENCY_M64US, /* > 64 us */ ++}; ++ ++/* Link Control and Status Register */ ++#define PCIE_LCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x80) ++#define PCIE_LCTLSTS_ASPM_ENABLE 0x00000003 /* Active State Link PM Control */ ++#define PCIE_LCTLSTS_ASPM_ENABLE_S 0 ++#define PCIE_LCTLSTS_RCB128 0x00000008 /* Read Completion Boundary 128*/ ++#define PCIE_LCTLSTS_LINK_DISABLE 0x00000010 /* Link Disable */ ++#define PCIE_LCTLSTS_RETRIAN_LINK 0x00000020 /* Retrain Link */ ++#define PCIE_LCTLSTS_COM_CLK_CFG 0x00000040 /* Common Clock Configuration */ ++#define PCIE_LCTLSTS_EXT_SYNC 0x00000080 /* Extended Synch */ ++#define PCIE_LCTLSTS_CLK_PM_EN 0x00000100 /* Enable Clock Powerm Management */ ++#define PCIE_LCTLSTS_LINK_SPEED 0x000F0000 /* Link Speed */ ++#define PCIE_LCTLSTS_LINK_SPEED_S 16 ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH 0x03F00000 /* Negotiated Link Width */ ++#define PCIE_LCTLSTS_NEGOTIATED_LINK_WIDTH_S 20 ++#define PCIE_LCTLSTS_RETRAIN_PENDING 0x08000000 /* Link training is ongoing */ ++#define PCIE_LCTLSTS_SLOT_CLK_CFG 0x10000000 /* Slot Clock Configuration */ ++#define PCIE_LCTLSTS_DLL_ACTIVE 0x20000000 /* Data Link Layer Active */ ++ ++/* Slot Capabilities Register */ ++#define PCIE_SLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x84) ++ ++/* Slot Capabilities */ ++#define PCIE_SLCTLSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x88) ++ ++/* Root Control and Capability Register */ ++#define PCIE_RCTLCAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x8C) ++#define PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR 0x00000001 /* #SERR on COR-ERR */ ++#define PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR 0x00000002 /* #SERR on Non-Fatal ERR */ ++#define PCIE_RCTLCAP_SERR_ON_FATAL_ERR 0x00000004 /* #SERR on Fatal ERR */ ++#define PCIE_RCTLCAP_PME_INT_EN 0x00000008 /* PME Interrupt Enable */ ++#define PCIE_RCTLCAP_SERR_ENABLE (PCIE_RCTLCAP_SERR_ON_CORRECTABLE_ERR | \ ++ PCIE_RCTLCAP_SERR_ON_NONFATAL_ERR | PCIE_RCTLCAP_SERR_ON_FATAL_ERR) ++/* Root Status Register */ ++#define PCIE_RSTS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x90) ++#define PCIE_RSTS_PME_REQ_ID 0x0000FFFF /* PME Request ID */ ++#define PCIE_RSTS_PME_REQ_ID_S 0 ++#define PCIE_RSTS_PME_STATUS 0x00010000 /* PME Status */ ++#define PCIE_RSTS_PME_PENDING 0x00020000 /* PME Pending */ ++ ++/* PCI Express Enhanced Capability Header */ ++#define PCIE_ENHANCED_CAP(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x100) ++#define PCIE_ENHANCED_CAP_ID 0x0000FFFF /* PCI Express Extended Capability ID */ ++#define PCIE_ENHANCED_CAP_ID_S 0 ++#define PCIE_ENHANCED_CAP_VER 0x000F0000 /* Capability Version */ ++#define PCIE_ENHANCED_CAP_VER_S 16 ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET 0xFFF00000 /* Next Capability Offset */ ++#define PCIE_ENHANCED_CAP_NEXT_OFFSET_S 20 ++ ++/* Uncorrectable Error Status Register */ ++#define PCIE_UES_R(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x104) ++#define PCIE_DATA_LINK_PROTOCOL_ERR 0x00000010 /* Data Link Protocol Error Status */ ++#define PCIE_SURPRISE_DOWN_ERROR 0x00000020 /* Surprise Down Error Status */ ++#define PCIE_POISONED_TLP 0x00001000 /* Poisoned TLP Status */ ++#define PCIE_FC_PROTOCOL_ERR 0x00002000 /* Flow Control Protocol Error Status */ ++#define PCIE_COMPLETION_TIMEOUT 0x00004000 /* Completion Timeout Status */ ++#define PCIE_COMPLETOR_ABORT 0x00008000 /* Completer Abort Error */ ++#define PCIE_UNEXPECTED_COMPLETION 0x00010000 /* Unexpected Completion Status */ ++#define PCIE_RECEIVER_OVERFLOW 0x00020000 /* Receive Overflow Status */ ++#define PCIE_MALFORNED_TLP 0x00040000 /* Malformed TLP Stauts */ ++#define PCIE_ECRC_ERR 0x00080000 /* ECRC Error Stauts */ ++#define PCIE_UR_REQ 0x00100000 /* Unsupported Request Error Status */ ++#define PCIE_ALL_UNCORRECTABLE_ERR (PCIE_DATA_LINK_PROTOCOL_ERR | PCIE_SURPRISE_DOWN_ERROR | \ ++ PCIE_POISONED_TLP | PCIE_FC_PROTOCOL_ERR | PCIE_COMPLETION_TIMEOUT | \ ++ PCIE_COMPLETOR_ABORT | PCIE_UNEXPECTED_COMPLETION | PCIE_RECEIVER_OVERFLOW |\ ++ PCIE_MALFORNED_TLP | PCIE_ECRC_ERR | PCIE_UR_REQ) ++ ++/* Uncorrectable Error Mask Register, Mask means no report */ ++#define PCIE_UEMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x108) ++ ++/* Uncorrectable Error Severity Register */ ++#define PCIE_UESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x10C) ++ ++/* Correctable Error Status Register */ ++#define PCIE_CESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x110) ++#define PCIE_RX_ERR 0x00000001 /* Receive Error Status */ ++#define PCIE_BAD_TLP 0x00000040 /* Bad TLP Status */ ++#define PCIE_BAD_DLLP 0x00000080 /* Bad DLLP Status */ ++#define PCIE_REPLAY_NUM_ROLLOVER 0x00000100 /* Replay Number Rollover Status */ ++#define PCIE_REPLAY_TIMER_TIMEOUT_ERR 0x00001000 /* Reply Timer Timeout Status */ ++#define PCIE_ADVISORY_NONFTAL_ERR 0x00002000 /* Advisory Non-Fatal Error Status */ ++#define PCIE_CORRECTABLE_ERR (PCIE_RX_ERR | PCIE_BAD_TLP | PCIE_BAD_DLLP | PCIE_REPLAY_NUM_ROLLOVER |\ ++ PCIE_REPLAY_TIMER_TIMEOUT_ERR | PCIE_ADVISORY_NONFTAL_ERR) ++ ++/* Correctable Error Mask Register */ ++#define PCIE_CEMR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x114) ++ ++/* Advanced Error Capabilities and Control Register */ ++#define PCIE_AECCR(X) (volatile u32*)(PCIE_RC_CFG_BASE + 0x118) ++#define PCIE_AECCR_FIRST_ERR_PTR 0x0000001F /* First Error Pointer */ ++#define PCIE_AECCR_FIRST_ERR_PTR_S 0 ++#define PCIE_AECCR_ECRC_GEN_CAP 0x00000020 /* ECRC Generation Capable */ ++#define PCIE_AECCR_ECRC_GEN_EN 0x00000040 /* ECRC Generation Enable */ ++#define PCIE_AECCR_ECRC_CHECK_CAP 0x00000080 /* ECRC Check Capable */ ++#define PCIE_AECCR_ECRC_CHECK_EN 0x00000100 /* ECRC Check Enable */ ++ ++/* Header Log Register 1 */ ++#define PCIE_HLR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x11C) ++ ++/* Header Log Register 2 */ ++#define PCIE_HLR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x120) ++ ++/* Header Log Register 3 */ ++#define PCIE_HLR3(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x124) ++ ++/* Header Log Register 4 */ ++#define PCIE_HLR4(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x128) ++ ++/* Root Error Command Register */ ++#define PCIE_RECR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x12C) ++#define PCIE_RECR_CORRECTABLE_ERR_REPORT_EN 0x00000001 /* COR-ERR */ ++#define PCIE_RECR_NONFATAL_ERR_REPORT_EN 0x00000002 /* Non-Fatal ERR */ ++#define PCIE_RECR_FATAL_ERR_REPORT_EN 0x00000004 /* Fatal ERR */ ++#define PCIE_RECR_ERR_REPORT_EN (PCIE_RECR_CORRECTABLE_ERR_REPORT_EN | \ ++ PCIE_RECR_NONFATAL_ERR_REPORT_EN | PCIE_RECR_FATAL_ERR_REPORT_EN) ++ ++/* Root Error Status Register */ ++#define PCIE_RESR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x130) ++#define PCIE_RESR_CORRECTABLE_ERR 0x00000001 /* COR-ERR Receveid */ ++#define PCIE_RESR_MULTI_CORRECTABLE_ERR 0x00000002 /* Multiple COR-ERR Received */ ++#define PCIE_RESR_FATAL_NOFATAL_ERR 0x00000004 /* ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_MULTI_FATAL_NOFATAL_ERR 0x00000008 /* Multiple ERR Fatal/Non-Fatal Received */ ++#define PCIE_RESR_FIRST_UNCORRECTABLE_FATAL_ERR 0x00000010 /* First UN-COR Fatal */ ++#define PCIR_RESR_NON_FATAL_ERR 0x00000020 /* Non-Fatal Error Message Received */ ++#define PCIE_RESR_FATAL_ERR 0x00000040 /* Fatal Message Received */ ++#define PCIE_RESR_AER_INT_MSG_NUM 0xF8000000 /* Advanced Error Interrupt Message Number */ ++#define PCIE_RESR_AER_INT_MSG_NUM_S 27 ++ ++/* Error Source Indentification Register */ ++#define PCIE_ESIR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x134) ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID 0x0000FFFF ++#define PCIE_ESIR_CORRECTABLE_ERR_SRC_ID_S 0 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID 0xFFFF0000 ++#define PCIE_ESIR_FATAL_NON_FATAL_SRC_ID_S 16 ++ ++/* VC Enhanced Capability Header */ ++#define PCIE_VC_ECH(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x140) ++ ++/* Port VC Capability Register */ ++#define PCIE_PVC1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x144) ++#define PCIE_PVC1_EXT_VC_CNT 0x00000007 /* Extended VC Count */ ++#define PCIE_PVC1_EXT_VC_CNT_S 0 ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT 0x00000070 /* Low Priority Extended VC Count */ ++#define PCIE_PVC1_LOW_PRI_EXT_VC_CNT_S 4 ++#define PCIE_PVC1_REF_CLK 0x00000300 /* Reference Clock */ ++#define PCIE_PVC1_REF_CLK_S 8 ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE 0x00000C00 /* Port Arbitration Table Entry Size */ ++#define PCIE_PVC1_PORT_ARB_TAB_ENTRY_SIZE_S 10 ++ ++/* Extended Virtual Channel Count Defintion */ ++#define PCIE_EXT_VC_CNT_MIN 0 ++#define PCIE_EXT_VC_CNT_MAX 7 ++ ++/* Port Arbitration Table Entry Size Definition */ ++enum { ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S1BIT = 0, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S2BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S4BIT, ++ PCIE_PORT_ARB_TAB_ENTRY_SIZE_S8BIT, ++}; ++ ++/* Port VC Capability Register 2 */ ++#define PCIE_PVC2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x148) ++#define PCIE_PVC2_VC_ARB_16P_FIXED_WRR 0x00000001 /* HW Fixed arbitration, 16 phase WRR */ ++#define PCIE_PVC2_VC_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_PVC2_VC_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_PVC2_VC_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_PVC2_VC_ARB_WRR 0x0000000F ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET 0xFF000000 /* VC arbitration table offset, not support */ ++#define PCIE_PVC2_VC_ARB_TAB_OFFSET_S 24 ++ ++/* Port VC Control and Status Register */ ++#define PCIE_PVCCRSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x14C) ++#define PCIE_PVCCRSR_LOAD_VC_ARB_TAB 0x00000001 /* Load VC Arbitration Table */ ++#define PCIE_PVCCRSR_VC_ARB_SEL 0x0000000E /* VC Arbitration Select */ ++#define PCIE_PVCCRSR_VC_ARB_SEL_S 1 ++#define PCIE_PVCCRSR_VC_ARB_TAB_STATUS 0x00010000 /* Arbitration Status */ ++ ++/* VC0 Resource Capability Register */ ++#define PCIE_VC0_RC(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x150) ++#define PCIE_VC0_RC_PORT_ARB_HW_FIXED 0x00000001 /* HW Fixed arbitration */ ++#define PCIE_VC0_RC_PORT_ARB_32P_WRR 0x00000002 /* 32 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_64P_WRR 0x00000004 /* 64 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_128P_WRR 0x00000008 /* 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_128P_WRR 0x00000010 /* Time-based 128 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB_TM_256P_WRR 0x00000020 /* Time-based 256 phase WRR */ ++#define PCIE_VC0_RC_PORT_ARB (PCIE_VC0_RC_PORT_ARB_HW_FIXED | PCIE_VC0_RC_PORT_ARB_32P_WRR |\ ++ PCIE_VC0_RC_PORT_ARB_64P_WRR | PCIE_VC0_RC_PORT_ARB_128P_WRR | \ ++ PCIE_VC0_RC_PORT_ARB_TM_128P_WRR | PCIE_VC0_RC_PORT_ARB_TM_256P_WRR) ++ ++#define PCIE_VC0_RC_REJECT_SNOOP 0x00008000 /* Reject Snoop Transactioin */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS 0x007F0000 /* Maximum time Slots */ ++#define PCIE_VC0_RC_MAX_TIMESLOTS_S 16 ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET 0xFF000000 /* Port Arbitration Table Offset */ ++#define PCIE_VC0_RC_PORT_ARB_TAB_OFFSET_S 24 ++ ++/* VC0 Resource Control Register */ ++#define PCIE_VC0_RC0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x154) ++#define PCIE_VC0_RC0_TVM0 0x00000001 /* TC0 and VC0 */ ++#define PCIE_VC0_RC0_TVM1 0x00000002 /* TC1 and VC1 */ ++#define PCIE_VC0_RC0_TVM2 0x00000004 /* TC2 and VC2 */ ++#define PCIE_VC0_RC0_TVM3 0x00000008 /* TC3 and VC3 */ ++#define PCIE_VC0_RC0_TVM4 0x00000010 /* TC4 and VC4 */ ++#define PCIE_VC0_RC0_TVM5 0x00000020 /* TC5 and VC5 */ ++#define PCIE_VC0_RC0_TVM6 0x00000040 /* TC6 and VC6 */ ++#define PCIE_VC0_RC0_TVM7 0x00000080 /* TC7 and VC7 */ ++#define PCIE_VC0_RC0_TC_VC 0x000000FF /* TC/VC mask */ ++ ++#define PCIE_VC0_RC0_LOAD_PORT_ARB_TAB 0x00010000 /* Load Port Arbitration Table */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL 0x000E0000 /* Port Arbitration Select */ ++#define PCIE_VC0_RC0_PORT_ARB_SEL_S 17 ++#define PCIE_VC0_RC0_VC_ID 0x07000000 /* VC ID */ ++#define PCIE_VC0_RC0_VC_ID_S 24 ++#define PCIE_VC0_RC0_VC_EN 0x80000000 /* VC Enable */ ++ ++/* VC0 Resource Status Register */ ++#define PCIE_VC0_RSR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x158) ++#define PCIE_VC0_RSR0_PORT_ARB_TAB_STATUS 0x00010000 /* Port Arbitration Table Status,not used */ ++#define PCIE_VC0_RSR0_VC_NEG_PENDING 0x00020000 /* VC Negotiation Pending */ ++ ++/* Ack Latency Timer and Replay Timer Register */ ++#define PCIE_ALTRT(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x700) ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT 0x0000FFFF /* Round Trip Latency Time Limit */ ++#define PCIE_ALTRT_ROUND_TRIP_LATENCY_LIMIT_S 0 ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT 0xFFFF0000 /* Replay Time Limit */ ++#define PCIE_ALTRT_REPLAY_TIME_LIMIT_S 16 ++ ++/* Other Message Register */ ++#define PCIE_OMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x704) ++ ++/* Port Force Link Register */ ++#define PCIE_PFLR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x708) ++#define PCIE_PFLR_LINK_NUM 0x000000FF /* Link Number */ ++#define PCIE_PFLR_LINK_NUM_S 0 ++#define PCIE_PFLR_FORCE_LINK 0x00008000 /* Force link */ ++#define PCIE_PFLR_LINK_STATE 0x003F0000 /* Link State */ ++#define PCIE_PFLR_LINK_STATE_S 16 ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT 0xFF000000 /* Low Power Entrance Count, only for EP */ ++#define PCIE_PFLR_LOW_POWER_ENTRY_CNT_S 24 ++ ++/* Ack Frequency Register */ ++#define PCIE_AFR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x70C) ++#define PCIE_AFR_AF 0x000000FF /* Ack Frequency */ ++#define PCIE_AFR_AF_S 0 ++#define PCIE_AFR_FTS_NUM 0x0000FF00 /* The number of Fast Training Sequence from L0S to L0 */ ++#define PCIE_AFR_FTS_NUM_S 8 ++#define PCIE_AFR_COM_FTS_NUM 0x00FF0000 /* N_FTS; when common clock is used*/ ++#define PCIE_AFR_COM_FTS_NUM_S 16 ++#define PCIE_AFR_L0S_ENTRY_LATENCY 0x07000000 /* L0s Entrance Latency */ ++#define PCIE_AFR_L0S_ENTRY_LATENCY_S 24 ++#define PCIE_AFR_L1_ENTRY_LATENCY 0x38000000 /* L1 Entrance Latency */ ++#define PCIE_AFR_L1_ENTRY_LATENCY_S 27 ++#define PCIE_AFR_FTS_NUM_DEFAULT 32 ++#define PCIE_AFR_L0S_ENTRY_LATENCY_DEFAULT 7 ++#define PCIE_AFR_L1_ENTRY_LATENCY_DEFAULT 5 ++ ++/* Port Link Control Register */ ++#define PCIE_PLCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x710) ++#define PCIE_PLCR_OTHER_MSG_REQ 0x00000001 /* Other Message Request */ ++#define PCIE_PLCR_SCRAMBLE_DISABLE 0x00000002 /* Scramble Disable */ ++#define PCIE_PLCR_LOOPBACK_EN 0x00000004 /* Loopback Enable */ ++#define PCIE_PLCR_LTSSM_HOT_RST 0x00000008 /* Force LTSSM to the hot reset */ ++#define PCIE_PLCR_DLL_LINK_EN 0x00000020 /* Enable Link initialization */ ++#define PCIE_PLCR_FAST_LINK_SIM_EN 0x00000080 /* Sets all internal timers to fast mode for simulation purposes */ ++#define PCIE_PLCR_LINK_MODE 0x003F0000 /* Link Mode Enable Mask */ ++#define PCIE_PLCR_LINK_MODE_S 16 ++#define PCIE_PLCR_CORRUPTED_CRC_EN 0x02000000 /* Enabled Corrupt CRC */ ++ ++/* Lane Skew Register */ ++#define PCIE_LSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x714) ++#define PCIE_LSR_LANE_SKEW_NUM 0x00FFFFFF /* Insert Lane Skew for Transmit, not applicable */ ++#define PCIE_LSR_LANE_SKEW_NUM_S 0 ++#define PCIE_LSR_FC_DISABLE 0x01000000 /* Disable of Flow Control */ ++#define PCIE_LSR_ACKNAK_DISABLE 0x02000000 /* Disable of Ack/Nak */ ++#define PCIE_LSR_LANE_DESKEW_DISABLE 0x80000000 /* Disable of Lane-to-Lane Skew */ ++ ++/* Symbol Number Register */ ++#define PCIE_SNR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x718) ++#define PCIE_SNR_TS 0x0000000F /* Number of TS Symbol */ ++#define PCIE_SNR_TS_S 0 ++#define PCIE_SNR_SKP 0x00000700 /* Number of SKP Symbol */ ++#define PCIE_SNR_SKP_S 8 ++#define PCIE_SNR_REPLAY_TIMER 0x0007C000 /* Timer Modifier for Replay Timer */ ++#define PCIE_SNR_REPLAY_TIMER_S 14 ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER 0x00F80000 /* Timer Modifier for Ack/Nak Latency Timer */ ++#define PCIE_SNR_ACKNAK_LATENCY_TIMER_S 19 ++#define PCIE_SNR_FC_TIMER 0x1F000000 /* Timer Modifier for Flow Control Watchdog Timer */ ++#define PCIE_SNR_FC_TIMER_S 28 ++ ++/* Symbol Timer Register and Filter Mask Register 1 */ ++#define PCIE_STRFMR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x71C) ++#define PCIE_STRFMR_SKP_INTERVAL 0x000007FF /* SKP lnterval Value */ ++#define PCIE_STRFMR_SKP_INTERVAL_S 0 ++#define PCIE_STRFMR_FC_WDT_DISABLE 0x00008000 /* Disable of FC Watchdog Timer */ ++#define PCIE_STRFMR_TLP_FUNC_MISMATCH_OK 0x00010000 /* Mask Function Mismatch Filtering for Incoming Requests */ ++#define PCIE_STRFMR_POISONED_TLP_OK 0x00020000 /* Mask Poisoned TLP Filtering */ ++#define PCIE_STRFMR_BAR_MATCH_OK 0x00040000 /* Mask BAR Match Filtering */ ++#define PCIE_STRFMR_TYPE1_CFG_REQ_OK 0x00080000 /* Mask Type 1 Configuration Request Filtering */ ++#define PCIE_STRFMR_LOCKED_REQ_OK 0x00100000 /* Mask Locked Request Filtering */ ++#define PCIE_STRFMR_CPL_TAG_ERR_RULES_OK 0x00200000 /* Mask Tag Error Rules for Received Completions */ ++#define PCIE_STRFMR_CPL_REQUESTOR_ID_MISMATCH_OK 0x00400000 /* Mask Requester ID Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_FUNC_MISMATCH_OK 0x00800000 /* Mask Function Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_TC_MISMATCH_OK 0x01000000 /* Mask Traffic Class Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_ATTR_MISMATCH_OK 0x02000000 /* Mask Attribute Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_CPL_LENGTH_MISMATCH_OK 0x04000000 /* Mask Length Mismatch Error for Received Completions */ ++#define PCIE_STRFMR_TLP_ECRC_ERR_OK 0x08000000 /* Mask ECRC Error Filtering */ ++#define PCIE_STRFMR_CPL_TLP_ECRC_OK 0x10000000 /* Mask ECRC Error Filtering for Completions */ ++#define PCIE_STRFMR_RX_TLP_MSG_NO_DROP 0x20000000 /* Send Message TLPs */ ++#define PCIE_STRFMR_RX_IO_TRANS_ENABLE 0x40000000 /* Mask Filtering of received I/O Requests */ ++#define PCIE_STRFMR_RX_CFG_TRANS_ENABLE 0x80000000 /* Mask Filtering of Received Configuration Requests */ ++ ++#define PCIE_DEF_SKP_INTERVAL 700 /* 1180 ~1538 , 125MHz * 2, 250MHz * 1 */ ++ ++/* Filter Masker Register 2 */ ++#define PCIE_FMR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x720) ++#define PCIE_FMR2_VENDOR_MSG0_PASSED_TO_TRGT1 0x00000001 /* Mask RADM Filtering and Error Handling Rules */ ++#define PCIE_FMR2_VENDOR_MSG1_PASSED_TO_TRGT1 0x00000002 /* Mask RADM Filtering and Error Handling Rules */ ++ ++/* Debug Register 0 */ ++#define PCIE_DBR0(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x728) ++ ++/* Debug Register 1 */ ++#define PCIE_DBR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x72C) ++ ++/* Transmit Posted FC Credit Status Register */ ++#define PCIE_TPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x730) ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS 0x00000FFF /* Transmit Posted Data FC Credits */ ++#define PCIE_TPFCS_TX_P_DATA_FC_CREDITS_S 0 ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS 0x000FF000 /* Transmit Posted Header FC Credits */ ++#define PCIE_TPFCS_TX_P_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Non-Posted FC Credit Status */ ++#define PCIE_TNPFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x734) ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS 0x00000FFF /* Transmit Non-Posted Data FC Credits */ ++#define PCIE_TNPFCS_TX_NP_DATA_FC_CREDITS_S 0 ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS 0x000FF000 /* Transmit Non-Posted Header FC Credits */ ++#define PCIE_TNPFCS_TX_NP_HDR_FC_CREDITS_S 12 ++ ++/* Transmit Complete FC Credit Status Register */ ++#define PCIE_TCFCS(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x738) ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS 0x00000FFF /* Transmit Completion Data FC Credits */ ++#define PCIE_TCFCS_TX_CPL_DATA_FC_CREDITS_S 0 ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS 0x000FF000 /* Transmit Completion Header FC Credits */ ++#define PCIE_TCFCS_TX_CPL_HDR_FC_CREDITS_S 12 ++ ++/* Queue Status Register */ ++#define PCIE_QSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x73C) ++#define PCIE_QSR_WAIT_UPDATE_FC_DLL 0x00000001 /* Received TLP FC Credits Not Returned */ ++#define PCIE_QSR_TX_RETRY_BUF_NOT_EMPTY 0x00000002 /* Transmit Retry Buffer Not Empty */ ++#define PCIE_QSR_RX_QUEUE_NOT_EMPTY 0x00000004 /* Received Queue Not Empty */ ++ ++/* VC Transmit Arbitration Register 1 */ ++#define PCIE_VCTAR1(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x740) ++#define PCIE_VCTAR1_WRR_WEIGHT_VC0 0x000000FF /* WRR Weight for VC0 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC1 0x0000FF00 /* WRR Weight for VC1 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC2 0x00FF0000 /* WRR Weight for VC2 */ ++#define PCIE_VCTAR1_WRR_WEIGHT_VC3 0xFF000000 /* WRR Weight for VC3 */ ++ ++/* VC Transmit Arbitration Register 2 */ ++#define PCIE_VCTAR2(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x744) ++#define PCIE_VCTAR2_WRR_WEIGHT_VC4 0x000000FF /* WRR Weight for VC4 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC5 0x0000FF00 /* WRR Weight for VC5 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC6 0x00FF0000 /* WRR Weight for VC6 */ ++#define PCIE_VCTAR2_WRR_WEIGHT_VC7 0xFF000000 /* WRR Weight for VC7 */ ++ ++/* VC0 Posted Receive Queue Control Register */ ++#define PCIE_VC0_PRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x748) ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS 0x00000FFF /* VC0 Posted Data Credits */ ++#define PCIE_VC0_PRQCR_P_DATA_CREDITS_S 0 ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS 0x000FF000 /* VC0 Posted Header Credits */ ++#define PCIE_VC0_PRQCR_P_HDR_CREDITS_S 12 ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE 0x00E00000 /* VC0 Posted TLP Queue Mode */ ++#define PCIE_VC0_PRQCR_P_TLP_QUEUE_MODE_S 20 ++#define PCIE_VC0_PRQCR_TLP_RELAX_ORDER 0x40000000 /* TLP Type Ordering for VC0 */ ++#define PCIE_VC0_PRQCR_VC_STRICT_ORDER 0x80000000 /* VC0 Ordering for Receive Queues */ ++ ++/* VC0 Non-Posted Receive Queue Control */ ++#define PCIE_VC0_NPRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x74C) ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS 0x00000FFF /* VC0 Non-Posted Data Credits */ ++#define PCIE_VC0_NPRQCR_NP_DATA_CREDITS_S 0 ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS 0x000FF000 /* VC0 Non-Posted Header Credits */ ++#define PCIE_VC0_NPRQCR_NP_HDR_CREDITS_S 12 ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE 0x00E00000 /* VC0 Non-Posted TLP Queue Mode */ ++#define PCIE_VC0_NPRQCR_NP_TLP_QUEUE_MODE_S 20 ++ ++/* VC0 Completion Receive Queue Control */ ++#define PCIE_VC0_CRQCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x750) ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS 0x00000FFF /* VC0 Completion TLP Queue Mode */ ++#define PCIE_VC0_CRQCR_CPL_DATA_CREDITS_S 0 ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS 0x000FF000 /* VC0 Completion Header Credits */ ++#define PCIE_VC0_CRQCR_CPL_HDR_CREDITS_S 12 ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE 0x00E00000 /* VC0 Completion Data Credits */ ++#define PCIE_VC0_CRQCR_CPL_TLP_QUEUE_MODE_S 21 ++ ++/* Applicable to the above three registers */ ++enum { ++ PCIE_VC0_TLP_QUEUE_MODE_STORE_FORWARD = 1, ++ PCIE_VC0_TLP_QUEUE_MODE_CUT_THROUGH = 2, ++ PCIE_VC0_TLP_QUEUE_MODE_BYPASS = 4, ++}; ++ ++/* VC0 Posted Buffer Depth Register */ ++#define PCIE_VC0_PBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7A8) ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Posted Data Queue Depth */ ++#define PCIE_VC0_PBD_P_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Posted Header Queue Depth */ ++#define PCIE_VC0_PBD_P_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Non-Posted Buffer Depth Register */ ++#define PCIE_VC0_NPBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7AC) ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES 0x00003FFF /* VC0 Non-Posted Data Queue Depth */ ++#define PCIE_VC0_NPBD_NP_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Non-Posted Header Queue Depth */ ++#define PCIE_VC0_NPBD_NP_HDR_QUEUE_ENTRIES_S 16 ++ ++/* VC0 Completion Buffer Depth Register */ ++#define PCIE_VC0_CBD(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x7B0) ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES 0x00003FFF /* C0 Completion Data Queue Depth */ ++#define PCIE_VC0_CBD_CPL_DATA_QUEUE_ENTRIES_S 0 ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES 0x03FF0000 /* VC0 Completion Header Queue Depth */ ++#define PCIE_VC0_CBD_CPL_HDR_QUEUE_ENTRIES_S 16 ++ ++/* PHY Status Register, all zeros in VR9 */ ++#define PCIE_PHYSR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x810) ++ ++/* PHY Control Register, all zeros in VR9 */ ++#define PCIE_PHYCR(X) (volatile u32*)(PCIE_RC_PORT_TO_BASE(X) + 0x814) ++ ++/* ++ * PCIe PDI PHY register definition, suppose all the following ++ * stuff is confidential. ++ * XXX, detailed bit definition ++ */ ++#define PCIE_PHY_PLL_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x22 << 1)) ++#define PCIE_PHY_PLL_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x23 << 1)) ++#define PCIE_PHY_PLL_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x24 << 1)) ++#define PCIE_PHY_PLL_CTRL4(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x25 << 1)) ++#define PCIE_PHY_PLL_CTRL5(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x26 << 1)) ++#define PCIE_PHY_PLL_CTRL6(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x27 << 1)) ++#define PCIE_PHY_PLL_CTRL7(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x28 << 1)) ++#define PCIE_PHY_PLL_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x29 << 1)) ++#define PCIE_PHY_PLL_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2A << 1)) ++#define PCIE_PHY_PLL_A_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2B << 1)) ++#define PCIE_PHY_PLL_STATUS(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x2C << 1)) ++ ++#define PCIE_PHY_TX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x30 << 1)) ++#define PCIE_PHY_TX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x31 << 1)) ++#define PCIE_PHY_TX1_CTRL3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x32 << 1)) ++#define PCIE_PHY_TX1_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x33 << 1)) ++#define PCIE_PHY_TX1_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x34 << 1)) ++#define PCIE_PHY_TX1_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x35 << 1)) ++#define PCIE_PHY_TX1_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x36 << 1)) ++#define PCIE_PHY_TX1_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x37 << 1)) ++ ++#define PCIE_PHY_TX2_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x38 << 1)) ++#define PCIE_PHY_TX2_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x39 << 1)) ++#define PCIE_PHY_TX2_A_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3B << 1)) ++#define PCIE_PHY_TX2_A_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3C << 1)) ++#define PCIE_PHY_TX2_MOD1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3D << 1)) ++#define PCIE_PHY_TX2_MOD2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3E << 1)) ++#define PCIE_PHY_TX2_MOD3(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x3F << 1)) ++ ++#define PCIE_PHY_RX1_CTRL1(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x50 << 1)) ++#define PCIE_PHY_RX1_CTRL2(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x51 << 1)) ++#define PCIE_PHY_RX1_CDR(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x52 << 1)) ++#define PCIE_PHY_RX1_EI(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x53 << 1)) ++#define PCIE_PHY_RX1_A_CTRL(X) (PCIE_PHY_PORT_TO_BASE(X) + (0x55 << 1)) ++ ++/* Interrupt related stuff */ ++#define PCIE_LEGACY_DISABLE 0 ++#define PCIE_LEGACY_INTA 1 ++#define PCIE_LEGACY_INTB 2 ++#define PCIE_LEGACY_INTC 3 ++#define PCIE_LEGACY_INTD 4 ++#define PCIE_LEGACY_INT_MAX PCIE_LEGACY_INTD ++ ++#define PCIE_IRQ_LOCK(lock) do { \ ++ unsigned long flags; \ ++ spin_lock_irqsave(&(lock), flags); ++#define PCIE_IRQ_UNLOCK(lock) \ ++ spin_unlock_irqrestore(&(lock), flags); \ ++} while (0) ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18) ++#define IRQF_SHARED SA_SHIRQ ++#endif ++ ++#define PCIE_MSG_MSI 0x00000001 ++#define PCIE_MSG_ISR 0x00000002 ++#define PCIE_MSG_FIXUP 0x00000004 ++#define PCIE_MSG_READ_CFG 0x00000008 ++#define PCIE_MSG_WRITE_CFG 0x00000010 ++#define PCIE_MSG_CFG (PCIE_MSG_READ_CFG | PCIE_MSG_WRITE_CFG) ++#define PCIE_MSG_REG 0x00000020 ++#define PCIE_MSG_INIT 0x00000040 ++#define PCIE_MSG_ERR 0x00000080 ++#define PCIE_MSG_PHY 0x00000100 ++#define PCIE_MSG_ANY 0x000001ff ++ ++#define IFX_PCIE_PORT0 0 ++#define IFX_PCIE_PORT1 1 ++ ++#ifdef CONFIG_IFX_PCIE_2ND_CORE ++#define IFX_PCIE_CORE_NR 2 ++#else ++#define IFX_PCIE_CORE_NR 1 ++#endif ++ ++//#define IFX_PCIE_ERROR_INT ++ ++//#define IFX_PCIE_DBG ++ ++#if defined(IFX_PCIE_DBG) ++#define IFX_PCIE_PRINT(_m, _fmt, args...) do { \ ++ if (g_pcie_debug_flag & (_m)) { \ ++ ifx_pcie_debug((_fmt), ##args); \ ++ } \ ++} while (0) ++ ++#define INLINE ++#else ++#define IFX_PCIE_PRINT(_m, _fmt, args...) \ ++ do {} while(0) ++#define INLINE inline ++#endif ++ ++struct ifx_pci_controller { ++ struct pci_controller pcic; ++ ++ /* RC specific, per host bus information */ ++ u32 port; /* Port index, 0 -- 1st core, 1 -- 2nd core */ ++}; ++ ++typedef struct ifx_pcie_ir_irq { ++ const unsigned int irq; ++ const char name[16]; ++}ifx_pcie_ir_irq_t; ++ ++typedef struct ifx_pcie_legacy_irq{ ++ const u32 irq_bit; ++ const int irq; ++}ifx_pcie_legacy_irq_t; ++ ++typedef struct ifx_pcie_irq { ++ ifx_pcie_ir_irq_t ir_irq; ++ ifx_pcie_legacy_irq_t legacy_irq[PCIE_LEGACY_INT_MAX]; ++}ifx_pcie_irq_t; ++ ++extern u32 g_pcie_debug_flag; ++extern void ifx_pcie_debug(const char *fmt, ...); ++extern void pcie_phy_clock_mode_setup(int pcie_port); ++extern void pcie_msi_pic_init(int pcie_port); ++extern u32 ifx_pcie_bus_enum_read_hack(int where, u32 value); ++extern u32 ifx_pcie_bus_enum_write_hack(int where, u32 value); ++ ++ ++#include <linux/types.h> ++#include <linux/delay.h> ++#include <linux/gpio.h> ++#include <linux/clk.h> ++ ++#include <lantiq_soc.h> ++ ++#define IFX_PCIE_GPIO_RESET 38 ++#define IFX_REG_R32 ltq_r32 ++#define IFX_REG_W32 ltq_w32 ++#define CONFIG_IFX_PCIE_HW_SWAP ++#define IFX_RCU_AHB_ENDIAN ((volatile u32*)(IFX_RCU + 0x004C)) ++#define IFX_RCU_RST_REQ ((volatile u32*)(IFX_RCU + 0x0010)) ++#define IFX_RCU_AHB_BE_PCIE_PDI 0x00000080 /* Configure PCIE PDI module in big endian*/ ++ ++#define IFX_RCU (KSEG1 | 0x1F203000) ++#define IFX_RCU_AHB_BE_PCIE_M 0x00000001 /* Configure AHB master port that connects to PCIe RC in big endian */ ++#define IFX_RCU_AHB_BE_PCIE_S 0x00000010 /* Configure AHB slave port that connects to PCIe RC in little endian */ ++#define IFX_RCU_AHB_BE_XBAR_M 0x00000002 /* Configure AHB master port that connects to XBAR in big endian */ ++#define CONFIG_IFX_PCIE_PHY_36MHZ_MODE ++ ++#define IFX_PMU1_MODULE_PCIE_PHY (0) ++#define IFX_PMU1_MODULE_PCIE_CTRL (1) ++#define IFX_PMU1_MODULE_PDI (4) ++#define IFX_PMU1_MODULE_MSI (5) ++ ++#define IFX_PMU_MODULE_PCIE_L0_CLK (31) ++ ++ ++static inline void pcie_ep_gpio_rst_init(int pcie_port) ++{ ++} ++ ++static inline void pcie_ahb_pmu_setup(void) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "ahb"); ++ clk_enable(clk); ++ //ltq_pmu_enable(PMU_AHBM | PMU_AHBS); ++} ++ ++static inline void pcie_rcu_endian_setup(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++#ifdef CONFIG_IFX_PCIE_HW_SWAP ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg |= IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#else ++ reg |= IFX_RCU_AHB_BE_PCIE_M; ++ reg &= ~IFX_RCU_AHB_BE_PCIE_S; ++ reg &= ~IFX_RCU_AHB_BE_XBAR_M; ++#endif /* CONFIG_IFX_PCIE_HW_SWAP */ ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++ IFX_PCIE_PRINT(PCIE_MSG_REG, "%s IFX_RCU_AHB_ENDIAN: 0x%08x\n", __func__, IFX_REG_R32(IFX_RCU_AHB_ENDIAN)); ++} ++ ++static inline void pcie_phy_pmu_enable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "phy"); ++ clk_enable(clk); ++ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PCIE_PHY); ++} ++ ++static inline void pcie_phy_pmu_disable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "phy"); ++ clk_disable(clk); ++ //ltq_pmu1_disable(1<<IFX_PMU1_MODULE_PCIE_PHY); ++} ++ ++static inline void pcie_pdi_big_endian(int pcie_port) ++{ ++ u32 reg; ++ ++ /* SRAM2PDI endianness control. */ ++ reg = IFX_REG_R32(IFX_RCU_AHB_ENDIAN); ++ /* Config AHB->PCIe and PDI endianness */ ++ reg |= IFX_RCU_AHB_BE_PCIE_PDI; ++ IFX_REG_W32(reg, IFX_RCU_AHB_ENDIAN); ++} ++ ++static inline void pcie_pdi_pmu_enable(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "pdi"); ++ clk_enable(clk); ++ //ltq_pmu1_enable(1<<IFX_PMU1_MODULE_PDI); ++} ++ ++static inline void pcie_core_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ ++ /* Reset PCIe PHY & Core, bit 22, bit 26 may be affected if write it directly */ ++ reg |= 0x00400000; ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_core_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ /* Reset PCIe PHY & Core, bit 22 */ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg &= ~0x00400000; ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_assert(int pcie_port) ++{ ++ u32 reg; ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg |= 0x00001000; /* Bit 12 */ ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_phy_rst_deassert(int pcie_port) ++{ ++ u32 reg; ++ ++ /* Make sure one micro-second delay */ ++ udelay(1); ++ ++ reg = IFX_REG_R32(IFX_RCU_RST_REQ); ++ reg &= ~0x00001000; /* Bit 12 */ ++ IFX_REG_W32(reg, IFX_RCU_RST_REQ); ++} ++ ++static inline void pcie_device_rst_assert(int pcie_port) ++{ ++ gpio_set_value(IFX_PCIE_GPIO_RESET, 0); ++ // ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++} ++ ++static inline void pcie_device_rst_deassert(int pcie_port) ++{ ++ mdelay(100); ++ gpio_set_value(IFX_PCIE_GPIO_RESET, 1); ++// ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); ++} ++ ++static inline void pcie_core_pmu_setup(int pcie_port) ++{ ++ struct clk *clk; ++ clk = clk_get_sys("ltq_pcie", "ctl"); ++ clk_enable(clk); ++ clk = clk_get_sys("ltq_pcie", "bus"); ++ clk_enable(clk); ++ ++ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_PCIE_CTRL); ++ //ltq_pmu_enable(1 << IFX_PMU_MODULE_PCIE_L0_CLK); ++} ++ ++static inline void pcie_msi_init(int pcie_port) ++{ ++ struct clk *clk; ++ pcie_msi_pic_init(pcie_port); ++ clk = clk_get_sys("ltq_pcie", "msi"); ++ clk_enable(clk); ++ //ltq_pmu1_enable(1 << IFX_PMU1_MODULE_MSI); ++} ++ ++static inline u32 ++ifx_pcie_bus_nr_deduct(u32 bus_number, int pcie_port) ++{ ++ u32 tbus_number = bus_number; ++ ++#ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tbus_number -= pcibios_1st_host_bus_nr(); ++ } ++#endif /* CONFIG_PCI_LANTIQ */ ++ return tbus_number; ++} ++ ++static inline u32 ++ifx_pcie_bus_enum_hack(struct pci_bus *bus, u32 devfn, int where, u32 value, int pcie_port, int read) ++{ ++ struct pci_dev *pdev; ++ u32 tvalue = value; ++ ++ /* Sanity check */ ++ pdev = pci_get_slot(bus, devfn); ++ if (pdev == NULL) { ++ return tvalue; ++ } ++ ++ /* Only care about PCI bridge */ ++ if (pdev->hdr_type != PCI_HEADER_TYPE_BRIDGE) { ++ return tvalue; ++ } ++ ++ if (read) { /* Read hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_read_hack(where, tvalue); ++ } ++ #endif /* CONFIG_PCI_LANTIQ */ ++ } ++ else { /* Write hack */ ++ #ifdef CONFIG_PCI_LANTIQ ++ if (pcibios_host_nr() > 1) { ++ tvalue = ifx_pcie_bus_enum_write_hack(where, tvalue); ++ } ++ #endif ++ } ++ return tvalue; ++} ++ ++#endif /* IFXMIPS_PCIE_VR9_H */ ++ +--- a/drivers/pci/pcie/aer/Kconfig ++++ b/drivers/pci/pcie/aer/Kconfig +@@ -19,6 +19,7 @@ config PCIEAER + config PCIE_ECRC + bool "PCI Express ECRC settings control" + depends on PCIEAER ++ default n + help + Used to override firmware/bios settings for PCI Express ECRC + (transaction layer end-to-end CRC checking). +--- a/include/linux/pci.h ++++ b/include/linux/pci.h +@@ -1250,6 +1250,8 @@ void pci_walk_bus(struct pci_bus *top, i + void *userdata); + int pci_cfg_space_size(struct pci_dev *dev); + unsigned char pci_bus_max_busnr(struct pci_bus *bus); ++int pcibios_host_nr(void); ++int pcibios_1st_host_bus_nr(void); + void pci_setup_bridge(struct pci_bus *bus); + resource_size_t pcibios_window_alignment(struct pci_bus *bus, + unsigned long type); +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -1056,6 +1056,12 @@ + #define PCI_DEVICE_ID_SGI_LITHIUM 0x1002 + #define PCI_DEVICE_ID_SGI_IOC4 0x100a + ++#define PCI_VENDOR_ID_INFINEON 0x15D1 ++#define PCI_DEVICE_ID_INFINEON_DANUBE 0x000F ++#define PCI_DEVICE_ID_INFINEON_PCIE 0x0011 ++#define PCI_VENDOR_ID_LANTIQ 0x1BEF ++#define PCI_DEVICE_ID_LANTIQ_PCIE 0x0011 ++ + #define PCI_VENDOR_ID_WINBOND 0x10ad + #define PCI_DEVICE_ID_WINBOND_82C105 0x0105 + #define PCI_DEVICE_ID_WINBOND_83C553 0x0565 diff --git a/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch b/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch new file mode 100644 index 0000000000..479decd6a0 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0004-MIPS-lantiq-add-atm-hack.patch @@ -0,0 +1,500 @@ +From 9afadf01b1be371ee88491819aa67364684461f9 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Fri, 3 Aug 2012 10:27:25 +0200 +Subject: [PATCH 04/36] MIPS: lantiq: add atm hack + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-lantiq/lantiq_atm.h | 196 +++++++++++++++++++++++ + arch/mips/include/asm/mach-lantiq/lantiq_ptm.h | 203 ++++++++++++++++++++++++ + arch/mips/lantiq/irq.c | 2 + + arch/mips/mm/cache.c | 2 + + include/uapi/linux/atm.h | 6 + + net/atm/common.c | 6 + + net/atm/proc.c | 2 +- + 7 files changed, 416 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_atm.h + create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_ptm.h + +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/lantiq_atm.h +@@ -0,0 +1,196 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifx_atm.h ++** PROJECT : UEIP ++** MODULES : ATM ++** ++** DATE : 17 Jun 2009 ++** AUTHOR : Xu Liang ++** DESCRIPTION : Global ATM driver header file ++** COPYRIGHT : Copyright (c) 2006 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 07 JUL 2009 Xu Liang Init Version ++*******************************************************************************/ ++ ++#ifndef IFX_ATM_H ++#define IFX_ATM_H ++ ++ ++ ++/*! ++ \defgroup IFX_ATM UEIP Project - ATM driver module ++ \brief UEIP Project - ATM driver module, support Danube, Amazon-SE, AR9, VR9. ++ */ ++ ++/*! ++ \defgroup IFX_ATM_IOCTL IOCTL Commands ++ \ingroup IFX_ATM ++ \brief IOCTL Commands used by user application. ++ */ ++ ++/*! ++ \defgroup IFX_ATM_STRUCT Structures ++ \ingroup IFX_ATM ++ \brief Structures used by user application. ++ */ ++ ++/*! ++ \file ifx_atm.h ++ \ingroup IFX_ATM ++ \brief ATM driver header file ++ */ ++ ++ ++ ++/* ++ * #################################### ++ * Definition ++ * #################################### ++ */ ++ ++/*! ++ \addtogroup IFX_ATM_STRUCT ++ */ ++/*@{*/ ++ ++/* ++ * ATM MIB ++ */ ++ ++/*! ++ \struct atm_cell_ifEntry_t ++ \brief Structure used for Cell Level MIB Counters. ++ ++ User application use this structure to call IOCTL command "PPE_ATM_MIB_CELL". ++ */ ++typedef struct { ++ __u32 ifHCInOctets_h; /*!< byte counter of ingress cells (upper 32 bits, total 64 bits) */ ++ __u32 ifHCInOctets_l; /*!< byte counter of ingress cells (lower 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_h; /*!< byte counter of egress cells (upper 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_l; /*!< byte counter of egress cells (lower 32 bits, total 64 bits) */ ++ __u32 ifInErrors; /*!< counter of error ingress cells */ ++ __u32 ifInUnknownProtos; /*!< counter of unknown ingress cells */ ++ __u32 ifOutErrors; /*!< counter of error egress cells */ ++} atm_cell_ifEntry_t; ++ ++/*! ++ \struct atm_aal5_ifEntry_t ++ \brief Structure used for AAL5 Frame Level MIB Counters. ++ ++ User application use this structure to call IOCTL command "PPE_ATM_MIB_AAL5". ++ */ ++typedef struct { ++ __u32 ifHCInOctets_h; /*!< byte counter of ingress packets (upper 32 bits, total 64 bits) */ ++ __u32 ifHCInOctets_l; /*!< byte counter of ingress packets (lower 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_h; /*!< byte counter of egress packets (upper 32 bits, total 64 bits) */ ++ __u32 ifHCOutOctets_l; /*!< byte counter of egress packets (lower 32 bits, total 64 bits) */ ++ __u32 ifInUcastPkts; /*!< counter of ingress packets */ ++ __u32 ifOutUcastPkts; /*!< counter of egress packets */ ++ __u32 ifInErrors; /*!< counter of error ingress packets */ ++ __u32 ifInDiscards; /*!< counter of dropped ingress packets */ ++ __u32 ifOutErros; /*!< counter of error egress packets */ ++ __u32 ifOutDiscards; /*!< counter of dropped egress packets */ ++} atm_aal5_ifEntry_t; ++ ++/*! ++ \struct atm_aal5_vcc_t ++ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. ++ ++ This structure is a part of structure "atm_aal5_vcc_x_t". ++ */ ++typedef struct { ++ __u32 aal5VccCrcErrors; /*!< counter of ingress packets with CRC error */ ++ __u32 aal5VccSarTimeOuts; /*!< counter of ingress packets with Re-assemble timeout */ //no timer support yet ++ __u32 aal5VccOverSizedSDUs; /*!< counter of oversized ingress packets */ ++} atm_aal5_vcc_t; ++ ++/*! ++ \struct atm_aal5_vcc_x_t ++ \brief Structure used for per PVC AAL5 Frame Level MIB Counters. ++ ++ User application use this structure to call IOCTL command "PPE_ATM_MIB_VCC". ++ */ ++typedef struct { ++ int vpi; /*!< VPI of the VCC to get MIB counters */ ++ int vci; /*!< VCI of the VCC to get MIB counters */ ++ atm_aal5_vcc_t mib_vcc; /*!< structure to get MIB counters */ ++} atm_aal5_vcc_x_t; ++ ++/*@}*/ ++ ++ ++ ++/* ++ * #################################### ++ * IOCTL ++ * #################################### ++ */ ++ ++/*! ++ \addtogroup IFX_ATM_IOCTL ++ */ ++/*@{*/ ++ ++/* ++ * ioctl Command ++ */ ++/*! ++ \brief ATM IOCTL Magic Number ++ */ ++#define PPE_ATM_IOC_MAGIC 'o' ++/*! ++ \brief ATM IOCTL Command - Get Cell Level MIB Counters ++ ++ This command is obsolete. User can get cell level MIB from DSL API. ++ This command uses structure "atm_cell_ifEntry_t" as parameter for output of MIB counters. ++ */ ++#define PPE_ATM_MIB_CELL _IOW(PPE_ATM_IOC_MAGIC, 0, atm_cell_ifEntry_t) ++/*! ++ \brief ATM IOCTL Command - Get AAL5 Level MIB Counters ++ ++ Get AAL5 packet counters. ++ This command uses structure "atm_aal5_ifEntry_t" as parameter for output of MIB counters. ++ */ ++#define PPE_ATM_MIB_AAL5 _IOW(PPE_ATM_IOC_MAGIC, 1, atm_aal5_ifEntry_t) ++/*! ++ \brief ATM IOCTL Command - Get Per PVC MIB Counters ++ ++ Get AAL5 packet counters for each PVC. ++ This command uses structure "atm_aal5_vcc_x_t" as parameter for input of VPI/VCI information and output of MIB counters. ++ */ ++#define PPE_ATM_MIB_VCC _IOWR(PPE_ATM_IOC_MAGIC, 2, atm_aal5_vcc_x_t) ++/*! ++ \brief Total Number of ATM IOCTL Commands ++ */ ++#define PPE_ATM_IOC_MAXNR 3 ++ ++/*@}*/ ++ ++ ++ ++/* ++ * #################################### ++ * API ++ * #################################### ++ */ ++ ++#ifdef __KERNEL__ ++struct port_cell_info { ++ unsigned int port_num; ++ unsigned int tx_link_rate[2]; ++}; ++#endif ++ ++ ++ ++#endif // IFX_ATM_H ++ +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/lantiq_ptm.h +@@ -0,0 +1,203 @@ ++/****************************************************************************** ++** ++** FILE NAME : ifx_ptm.h ++** PROJECT : UEIP ++** MODULES : PTM ++** ++** DATE : 17 Jun 2009 ++** AUTHOR : Xu Liang ++** DESCRIPTION : Global PTM driver header file ++** COPYRIGHT : Copyright (c) 2006 ++** Infineon Technologies AG ++** Am Campeon 1-12, 85579 Neubiberg, Germany ++** ++** This program is free software; you can redistribute it and/or modify ++** it under the terms of the GNU General Public License as published by ++** the Free Software Foundation; either version 2 of the License, or ++** (at your option) any later version. ++** ++** HISTORY ++** $Date $Author $Comment ++** 07 JUL 2009 Xu Liang Init Version ++*******************************************************************************/ ++ ++#ifndef IFX_PTM_H ++#define IFX_PTM_H ++ ++ ++ ++/*! ++ \defgroup IFX_PTM UEIP Project - PTM driver module ++ \brief UEIP Project - PTM driver module, support Danube, Amazon-SE, AR9, VR9. ++ */ ++ ++/*! ++ \defgroup IFX_PTM_IOCTL IOCTL Commands ++ \ingroup IFX_PTM ++ \brief IOCTL Commands used by user application. ++ */ ++ ++/*! ++ \defgroup IFX_PTM_STRUCT Structures ++ \ingroup IFX_PTM ++ \brief Structures used by user application. ++ */ ++ ++/*! ++ \file ifx_ptm.h ++ \ingroup IFX_PTM ++ \brief PTM driver header file ++ */ ++ ++ ++ ++/* ++ * #################################### ++ * Definition ++ * #################################### ++ */ ++ ++ ++ ++/* ++ * #################################### ++ * IOCTL ++ * #################################### ++ */ ++ ++/*! ++ \addtogroup IFX_PTM_IOCTL ++ */ ++/*@{*/ ++ ++/* ++ * ioctl Command ++ */ ++/*! ++ \brief PTM IOCTL Command - Get codeword MIB counters. ++ ++ This command uses structure "PTM_CW_IF_ENTRY_T" to get codeword level MIB counters. ++ */ ++#define IFX_PTM_MIB_CW_GET SIOCDEVPRIVATE + 1 ++/*! ++ \brief PTM IOCTL Command - Get packet MIB counters. ++ ++ This command uses structure "PTM_FRAME_MIB_T" to get packet level MIB counters. ++ */ ++#define IFX_PTM_MIB_FRAME_GET SIOCDEVPRIVATE + 2 ++/*! ++ \brief PTM IOCTL Command - Get firmware configuration (CRC). ++ ++ This command uses structure "IFX_PTM_CFG_T" to get firmware configuration (CRC). ++ */ ++#define IFX_PTM_CFG_GET SIOCDEVPRIVATE + 3 ++/*! ++ \brief PTM IOCTL Command - Set firmware configuration (CRC). ++ ++ This command uses structure "IFX_PTM_CFG_T" to set firmware configuration (CRC). ++ */ ++#define IFX_PTM_CFG_SET SIOCDEVPRIVATE + 4 ++/*! ++ \brief PTM IOCTL Command - Program priority value to TX queue mapping. ++ ++ This command uses structure "IFX_PTM_PRIO_Q_MAP_T" to program priority value to TX queue mapping. ++ */ ++#define IFX_PTM_MAP_PKT_PRIO_TO_Q SIOCDEVPRIVATE + 14 ++ ++/*@}*/ ++ ++ ++/*! ++ \addtogroup IFX_PTM_STRUCT ++ */ ++/*@{*/ ++ ++/* ++ * ioctl Data Type ++ */ ++ ++/*! ++ \typedef PTM_CW_IF_ENTRY_T ++ \brief Wrapping of structure "ptm_cw_ifEntry_t". ++ */ ++/*! ++ \struct ptm_cw_ifEntry_t ++ \brief Structure used for CodeWord level MIB counters. ++ */ ++typedef struct ptm_cw_ifEntry_t { ++ uint32_t ifRxNoIdleCodewords; /*!< output, number of ingress user codeword */ ++ uint32_t ifRxIdleCodewords; /*!< output, number of ingress idle codeword */ ++ uint32_t ifRxCodingViolation; /*!< output, number of error ingress codeword */ ++ uint32_t ifTxNoIdleCodewords; /*!< output, number of egress user codeword */ ++ uint32_t ifTxIdleCodewords; /*!< output, number of egress idle codeword */ ++} PTM_CW_IF_ENTRY_T; ++ ++/*! ++ \typedef PTM_FRAME_MIB_T ++ \brief Wrapping of structure "ptm_frame_mib_t". ++ */ ++/*! ++ \struct ptm_frame_mib_t ++ \brief Structure used for packet level MIB counters. ++ */ ++typedef struct ptm_frame_mib_t { ++ uint32_t RxCorrect; /*!< output, number of ingress packet */ ++ uint32_t TC_CrcError; /*!< output, number of egress packet with CRC error */ ++ uint32_t RxDropped; /*!< output, number of dropped ingress packet */ ++ uint32_t TxSend; /*!< output, number of egress packet */ ++} PTM_FRAME_MIB_T; ++ ++/*! ++ \typedef IFX_PTM_CFG_T ++ \brief Wrapping of structure "ptm_cfg_t". ++ */ ++/*! ++ \struct ptm_cfg_t ++ \brief Structure used for ETH/TC CRC configuration. ++ */ ++typedef struct ptm_cfg_t { ++ uint32_t RxEthCrcPresent; /*!< input/output, ingress packet has ETH CRC */ ++ uint32_t RxEthCrcCheck; /*!< input/output, check ETH CRC of ingress packet */ ++ uint32_t RxTcCrcCheck; /*!< input/output, check TC CRC of ingress codeword */ ++ uint32_t RxTcCrcLen; /*!< input/output, length of TC CRC of ingress codeword */ ++ uint32_t TxEthCrcGen; /*!< input/output, generate ETH CRC for egress packet */ ++ uint32_t TxTcCrcGen; /*!< input/output, generate TC CRC for egress codeword */ ++ uint32_t TxTcCrcLen; /*!< input/output, length of TC CRC of egress codeword */ ++} IFX_PTM_CFG_T; ++ ++/*! ++ \typedef IFX_PTM_PRIO_Q_MAP_T ++ \brief Wrapping of structure "ppe_prio_q_map". ++ */ ++/*! ++ \struct ppe_prio_q_map ++ \brief Structure used for Priority Value to TX Queue mapping. ++ */ ++typedef struct ppe_prio_q_map { ++ int pkt_prio; ++ int qid; ++ int vpi; // ignored in eth interface ++ int vci; // ignored in eth interface ++} IFX_PTM_PRIO_Q_MAP_T; ++ ++/*@}*/ ++ ++ ++ ++/* ++ * #################################### ++ * API ++ * #################################### ++ */ ++ ++#ifdef __KERNEL__ ++struct port_cell_info { ++ unsigned int port_num; ++ unsigned int tx_link_rate[2]; ++}; ++#endif ++ ++ ++ ++#endif // IFX_PTM_H ++ +--- a/arch/mips/lantiq/irq.c ++++ b/arch/mips/lantiq/irq.c +@@ -14,6 +14,7 @@ + #include <linux/of_platform.h> + #include <linux/of_address.h> + #include <linux/of_irq.h> ++#include <linux/module.h> + + #include <asm/bootinfo.h> + #include <asm/irq_cpu.h> +@@ -100,6 +101,7 @@ void ltq_mask_and_ack_irq(struct irq_dat + ltq_icu_w32(im, ltq_icu_r32(im, ier) & ~BIT(offset), ier); + ltq_icu_w32(im, BIT(offset), isr); + } ++EXPORT_SYMBOL(ltq_mask_and_ack_irq); + + static void ltq_ack_irq(struct irq_data *d) + { +--- a/arch/mips/mm/cache.c ++++ b/arch/mips/mm/cache.c +@@ -63,6 +63,8 @@ void (*_dma_cache_wback)(unsigned long s + void (*_dma_cache_inv)(unsigned long start, unsigned long size); + + EXPORT_SYMBOL(_dma_cache_wback_inv); ++EXPORT_SYMBOL(_dma_cache_wback); ++EXPORT_SYMBOL(_dma_cache_inv); + + #endif /* CONFIG_DMA_NONCOHERENT || CONFIG_DMA_MAYBE_COHERENT */ + +--- a/include/uapi/linux/atm.h ++++ b/include/uapi/linux/atm.h +@@ -130,8 +130,14 @@ + #define ATM_ABR 4 + #define ATM_ANYCLASS 5 /* compatible with everything */ + ++#define ATM_VBR_NRT ATM_VBR ++#define ATM_VBR_RT 6 ++#define ATM_UBR_PLUS 7 ++#define ATM_GFR 8 ++ + #define ATM_MAX_PCR -1 /* maximum available PCR */ + ++ + struct atm_trafprm { + unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ + int max_pcr; /* maximum PCR in cells per second */ +--- a/net/atm/common.c ++++ b/net/atm/common.c +@@ -62,11 +62,17 @@ static void vcc_remove_socket(struct soc + write_unlock_irq(&vcc_sklist_lock); + } + ++struct sk_buff* (*ifx_atm_alloc_tx)(struct atm_vcc *, unsigned int) = NULL; ++EXPORT_SYMBOL(ifx_atm_alloc_tx); ++ + static struct sk_buff *alloc_tx(struct atm_vcc *vcc, unsigned int size) + { + struct sk_buff *skb; + struct sock *sk = sk_atm(vcc); + ++ if (ifx_atm_alloc_tx != NULL) ++ return ifx_atm_alloc_tx(vcc, size); ++ + if (sk_wmem_alloc_get(sk) && !atm_may_send(vcc, size)) { + pr_debug("Sorry: wmem_alloc = %d, size = %d, sndbuf = %d\n", + sk_wmem_alloc_get(sk), size, sk->sk_sndbuf); +--- a/net/atm/proc.c ++++ b/net/atm/proc.c +@@ -154,7 +154,7 @@ static void *vcc_seq_next(struct seq_fil + static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) + { + static const char *const class_name[] = { +- "off", "UBR", "CBR", "VBR", "ABR"}; ++ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"}; + static const char *const aal_name[] = { + "---", "1", "2", "3/4", /* 0- 3 */ + "???", "5", "???", "???", /* 4- 7 */ diff --git a/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch b/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch new file mode 100644 index 0000000000..335a1e2616 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0008-MIPS-lantiq-backport-old-timer-code.patch @@ -0,0 +1,1034 @@ +From 94800350cb8d2f29dda2206b5e9a3772024ee168 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 7 Aug 2014 18:30:56 +0200 +Subject: [PATCH 08/36] MIPS: lantiq: backport old timer code + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-lantiq/lantiq_timer.h | 155 ++++ + arch/mips/lantiq/xway/Makefile | 2 +- + arch/mips/lantiq/xway/timer.c | 845 ++++++++++++++++++++++ + 3 files changed, 1001 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/include/asm/mach-lantiq/lantiq_timer.h + create mode 100644 arch/mips/lantiq/xway/timer.c + +--- /dev/null ++++ b/arch/mips/include/asm/mach-lantiq/lantiq_timer.h +@@ -0,0 +1,155 @@ ++#ifndef __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ ++#define __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ ++ ++ ++/****************************************************************************** ++ Copyright (c) 2002, Infineon Technologies. All rights reserved. ++ ++ No Warranty ++ Because the program is licensed free of charge, there is no warranty for ++ the program, to the extent permitted by applicable law. Except when ++ otherwise stated in writing the copyright holders and/or other parties ++ provide the program "as is" without warranty of any kind, either ++ expressed or implied, including, but not limited to, the implied ++ warranties of merchantability and fitness for a particular purpose. The ++ entire risk as to the quality and performance of the program is with ++ you. should the program prove defective, you assume the cost of all ++ necessary servicing, repair or correction. ++ ++ In no event unless required by applicable law or agreed to in writing ++ will any copyright holder, or any other party who may modify and/or ++ redistribute the program as permitted above, be liable to you for ++ damages, including any general, special, incidental or consequential ++ damages arising out of the use or inability to use the program ++ (including but not limited to loss of data or data being rendered ++ inaccurate or losses sustained by you or third parties or a failure of ++ the program to operate with any other programs), even if such holder or ++ other party has been advised of the possibility of such damages. ++******************************************************************************/ ++ ++ ++/* ++ * #################################### ++ * Definition ++ * #################################### ++ */ ++ ++/* ++ * Available Timer/Counter Index ++ */ ++#define TIMER(n, X) (n * 2 + (X ? 1 : 0)) ++#define TIMER_ANY 0x00 ++#define TIMER1A TIMER(1, 0) ++#define TIMER1B TIMER(1, 1) ++#define TIMER2A TIMER(2, 0) ++#define TIMER2B TIMER(2, 1) ++#define TIMER3A TIMER(3, 0) ++#define TIMER3B TIMER(3, 1) ++ ++/* ++ * Flag of Timer/Counter ++ * These flags specify the way in which timer is configured. ++ */ ++/* Bit size of timer/counter. */ ++#define TIMER_FLAG_16BIT 0x0000 ++#define TIMER_FLAG_32BIT 0x0001 ++/* Switch between timer and counter. */ ++#define TIMER_FLAG_TIMER 0x0000 ++#define TIMER_FLAG_COUNTER 0x0002 ++/* Stop or continue when overflowing/underflowing. */ ++#define TIMER_FLAG_ONCE 0x0000 ++#define TIMER_FLAG_CYCLIC 0x0004 ++/* Count up or counter down. */ ++#define TIMER_FLAG_UP 0x0000 ++#define TIMER_FLAG_DOWN 0x0008 ++/* Count on specific level or edge. */ ++#define TIMER_FLAG_HIGH_LEVEL_SENSITIVE 0x0000 ++#define TIMER_FLAG_LOW_LEVEL_SENSITIVE 0x0040 ++#define TIMER_FLAG_RISE_EDGE 0x0010 ++#define TIMER_FLAG_FALL_EDGE 0x0020 ++#define TIMER_FLAG_ANY_EDGE 0x0030 ++/* Signal is syncronous to module clock or not. */ ++#define TIMER_FLAG_UNSYNC 0x0000 ++#define TIMER_FLAG_SYNC 0x0080 ++/* Different interrupt handle type. */ ++#define TIMER_FLAG_NO_HANDLE 0x0000 ++#if defined(__KERNEL__) ++ #define TIMER_FLAG_CALLBACK_IN_IRQ 0x0100 ++#endif // defined(__KERNEL__) ++#define TIMER_FLAG_SIGNAL 0x0300 ++/* Internal clock source or external clock source */ ++#define TIMER_FLAG_INT_SRC 0x0000 ++#define TIMER_FLAG_EXT_SRC 0x1000 ++ ++ ++/* ++ * ioctl Command ++ */ ++#define GPTU_REQUEST_TIMER 0x01 /* General method to setup timer/counter. */ ++#define GPTU_FREE_TIMER 0x02 /* Free timer/counter. */ ++#define GPTU_START_TIMER 0x03 /* Start or resume timer/counter. */ ++#define GPTU_STOP_TIMER 0x04 /* Suspend timer/counter. */ ++#define GPTU_GET_COUNT_VALUE 0x05 /* Get current count value. */ ++#define GPTU_CALCULATE_DIVIDER 0x06 /* Calculate timer divider from given freq.*/ ++#define GPTU_SET_TIMER 0x07 /* Simplified method to setup timer. */ ++#define GPTU_SET_COUNTER 0x08 /* Simplified method to setup counter. */ ++ ++/* ++ * Data Type Used to Call ioctl ++ */ ++struct gptu_ioctl_param { ++ unsigned int timer; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * ++ * GPTU_SET_COUNTER, this field is ID of expected * ++ * timer/counter. If it's zero, a timer/counter would * ++ * be dynamically allocated and ID would be stored in * ++ * this field. * ++ * In command GPTU_GET_COUNT_VALUE, this field is * ++ * ignored. * ++ * In other command, this field is ID of timer/counter * ++ * allocated. */ ++ unsigned int flag; /* In command GPTU_REQUEST_TIMER, GPTU_SET_TIMER, and * ++ * GPTU_SET_COUNTER, this field contains flags to * ++ * specify how to configure timer/counter. * ++ * In command GPTU_START_TIMER, zero indicate start * ++ * and non-zero indicate resume timer/counter. * ++ * In other command, this field is ignored. */ ++ unsigned long value; /* In command GPTU_REQUEST_TIMER, this field contains * ++ * init/reload value. * ++ * In command GPTU_SET_TIMER, this field contains * ++ * frequency (0.001Hz) of timer. * ++ * In command GPTU_GET_COUNT_VALUE, current count * ++ * value would be stored in this field. * ++ * In command GPTU_CALCULATE_DIVIDER, this field * ++ * contains frequency wanted, and after calculation, * ++ * divider would be stored in this field to overwrite * ++ * the frequency. * ++ * In other command, this field is ignored. */ ++ int pid; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * ++ * if signal is required, this field contains process * ++ * ID to which signal would be sent. * ++ * In other command, this field is ignored. */ ++ int sig; /* In command GPTU_REQUEST_TIMER and GPTU_SET_TIMER, * ++ * if signal is required, this field contains signal * ++ * number which would be sent. * ++ * In other command, this field is ignored. */ ++}; ++ ++/* ++ * #################################### ++ * Data Type ++ * #################################### ++ */ ++typedef void (*timer_callback)(unsigned long arg); ++ ++extern int lq_request_timer(unsigned int, unsigned int, unsigned long, unsigned long, unsigned long); ++extern int lq_free_timer(unsigned int); ++extern int lq_start_timer(unsigned int, int); ++extern int lq_stop_timer(unsigned int); ++extern int lq_reset_counter_flags(u32 timer, u32 flags); ++extern int lq_get_count_value(unsigned int, unsigned long *); ++extern u32 lq_cal_divider(unsigned long); ++extern int lq_set_timer(unsigned int, unsigned int, int, int, unsigned int, unsigned long, unsigned long); ++extern int lq_set_counter(unsigned int timer, unsigned int flag, ++ u32 reload, unsigned long arg1, unsigned long arg2); ++ ++#endif /* __DANUBE_GPTU_DEV_H__2005_07_26__10_19__ */ +--- a/arch/mips/lantiq/xway/Makefile ++++ b/arch/mips/lantiq/xway/Makefile +@@ -1,4 +1,10 @@ +-obj-y := prom.o sysctrl.o clk.o reset.o dma.o gptu.o dcdc.o ++obj-y := prom.o sysctrl.o clk.o reset.o dma.o dcdc.o ++ ++ifdef CONFIG_SOC_AMAZON_SE ++obj-y += gptu.o ++else ++obj-y += timer.o ++endif + + obj-y += vmmc.o + +--- /dev/null ++++ b/arch/mips/lantiq/xway/timer.c +@@ -0,0 +1,845 @@ ++#ifndef CONFIG_SOC_AMAZON_SE ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/types.h> ++#include <linux/fs.h> ++#include <linux/miscdevice.h> ++#include <linux/init.h> ++#include <linux/uaccess.h> ++#include <linux/unistd.h> ++#include <linux/errno.h> ++#include <linux/interrupt.h> ++#include <linux/sched.h> ++ ++#include <asm/irq.h> ++#include <asm/div64.h> ++#include "../clk.h" ++ ++#include <lantiq_soc.h> ++#include <lantiq_irq.h> ++#include <lantiq_timer.h> ++ ++#define MAX_NUM_OF_32BIT_TIMER_BLOCKS 6 ++ ++#ifdef TIMER1A ++#define FIRST_TIMER TIMER1A ++#else ++#define FIRST_TIMER 2 ++#endif ++ ++/* ++ * GPTC divider is set or not. ++ */ ++#define GPTU_CLC_RMC_IS_SET 0 ++ ++/* ++ * Timer Interrupt (IRQ) ++ */ ++/* Must be adjusted when ICU driver is available */ ++#define TIMER_INTERRUPT (INT_NUM_IM3_IRL0 + 22) ++ ++/* ++ * Bits Operation ++ */ ++#define GET_BITS(x, msb, lsb) \ ++ (((x) & ((1 << ((msb) + 1)) - 1)) >> (lsb)) ++#define SET_BITS(x, msb, lsb, value) \ ++ (((x) & ~(((1 << ((msb) + 1)) - 1) ^ ((1 << (lsb)) - 1))) | \ ++ (((value) & ((1 << (1 + (msb) - (lsb))) - 1)) << (lsb))) ++ ++/* ++ * GPTU Register Mapping ++ */ ++#define LQ_GPTU (KSEG1 + 0x1E100A00) ++#define LQ_GPTU_CLC ((volatile u32 *)(LQ_GPTU + 0x0000)) ++#define LQ_GPTU_ID ((volatile u32 *)(LQ_GPTU + 0x0008)) ++#define LQ_GPTU_CON(n, X) ((volatile u32 *)(LQ_GPTU + 0x0010 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_RUN(n, X) ((volatile u32 *)(LQ_GPTU + 0x0018 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_RELOAD(n, X) ((volatile u32 *)(LQ_GPTU + 0x0020 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_COUNT(n, X) ((volatile u32 *)(LQ_GPTU + 0x0028 + ((X) * 4) + ((n) - 1) * 0x0020)) /* X must be either A or B */ ++#define LQ_GPTU_IRNEN ((volatile u32 *)(LQ_GPTU + 0x00F4)) ++#define LQ_GPTU_IRNICR ((volatile u32 *)(LQ_GPTU + 0x00F8)) ++#define LQ_GPTU_IRNCR ((volatile u32 *)(LQ_GPTU + 0x00FC)) ++ ++/* ++ * Clock Control Register ++ */ ++#define GPTU_CLC_SMC GET_BITS(*LQ_GPTU_CLC, 23, 16) ++#define GPTU_CLC_RMC GET_BITS(*LQ_GPTU_CLC, 15, 8) ++#define GPTU_CLC_FSOE (*LQ_GPTU_CLC & (1 << 5)) ++#define GPTU_CLC_EDIS (*LQ_GPTU_CLC & (1 << 3)) ++#define GPTU_CLC_SPEN (*LQ_GPTU_CLC & (1 << 2)) ++#define GPTU_CLC_DISS (*LQ_GPTU_CLC & (1 << 1)) ++#define GPTU_CLC_DISR (*LQ_GPTU_CLC & (1 << 0)) ++ ++#define GPTU_CLC_SMC_SET(value) SET_BITS(0, 23, 16, (value)) ++#define GPTU_CLC_RMC_SET(value) SET_BITS(0, 15, 8, (value)) ++#define GPTU_CLC_FSOE_SET(value) ((value) ? (1 << 5) : 0) ++#define GPTU_CLC_SBWE_SET(value) ((value) ? (1 << 4) : 0) ++#define GPTU_CLC_EDIS_SET(value) ((value) ? (1 << 3) : 0) ++#define GPTU_CLC_SPEN_SET(value) ((value) ? (1 << 2) : 0) ++#define GPTU_CLC_DISR_SET(value) ((value) ? (1 << 0) : 0) ++ ++/* ++ * ID Register ++ */ ++#define GPTU_ID_ID GET_BITS(*LQ_GPTU_ID, 15, 8) ++#define GPTU_ID_CFG GET_BITS(*LQ_GPTU_ID, 7, 5) ++#define GPTU_ID_REV GET_BITS(*LQ_GPTU_ID, 4, 0) ++ ++/* ++ * Control Register of Timer/Counter nX ++ * n is the index of block (1 based index) ++ * X is either A or B ++ */ ++#define GPTU_CON_SRC_EG(n, X) (*LQ_GPTU_CON(n, X) & (1 << 10)) ++#define GPTU_CON_SRC_EXT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 9)) ++#define GPTU_CON_SYNC(n, X) (*LQ_GPTU_CON(n, X) & (1 << 8)) ++#define GPTU_CON_EDGE(n, X) GET_BITS(*LQ_GPTU_CON(n, X), 7, 6) ++#define GPTU_CON_INV(n, X) (*LQ_GPTU_CON(n, X) & (1 << 5)) ++#define GPTU_CON_EXT(n, X) (*LQ_GPTU_CON(n, A) & (1 << 4)) /* Timer/Counter B does not have this bit */ ++#define GPTU_CON_STP(n, X) (*LQ_GPTU_CON(n, X) & (1 << 3)) ++#define GPTU_CON_CNT(n, X) (*LQ_GPTU_CON(n, X) & (1 << 2)) ++#define GPTU_CON_DIR(n, X) (*LQ_GPTU_CON(n, X) & (1 << 1)) ++#define GPTU_CON_EN(n, X) (*LQ_GPTU_CON(n, X) & (1 << 0)) ++ ++#define GPTU_CON_SRC_EG_SET(value) ((value) ? 0 : (1 << 10)) ++#define GPTU_CON_SRC_EXT_SET(value) ((value) ? (1 << 9) : 0) ++#define GPTU_CON_SYNC_SET(value) ((value) ? (1 << 8) : 0) ++#define GPTU_CON_EDGE_SET(value) SET_BITS(0, 7, 6, (value)) ++#define GPTU_CON_INV_SET(value) ((value) ? (1 << 5) : 0) ++#define GPTU_CON_EXT_SET(value) ((value) ? (1 << 4) : 0) ++#define GPTU_CON_STP_SET(value) ((value) ? (1 << 3) : 0) ++#define GPTU_CON_CNT_SET(value) ((value) ? (1 << 2) : 0) ++#define GPTU_CON_DIR_SET(value) ((value) ? (1 << 1) : 0) ++ ++#define GPTU_RUN_RL_SET(value) ((value) ? (1 << 2) : 0) ++#define GPTU_RUN_CEN_SET(value) ((value) ? (1 << 1) : 0) ++#define GPTU_RUN_SEN_SET(value) ((value) ? (1 << 0) : 0) ++ ++#define GPTU_IRNEN_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) ++#define GPTU_IRNCR_TC_SET(n, X, value) ((value) ? (1 << (((n) - 1) * 2 + (X))) : 0) ++ ++#define TIMER_FLAG_MASK_SIZE(x) (x & 0x0001) ++#define TIMER_FLAG_MASK_TYPE(x) (x & 0x0002) ++#define TIMER_FLAG_MASK_STOP(x) (x & 0x0004) ++#define TIMER_FLAG_MASK_DIR(x) (x & 0x0008) ++#define TIMER_FLAG_NONE_EDGE 0x0000 ++#define TIMER_FLAG_MASK_EDGE(x) (x & 0x0030) ++#define TIMER_FLAG_REAL 0x0000 ++#define TIMER_FLAG_INVERT 0x0040 ++#define TIMER_FLAG_MASK_INVERT(x) (x & 0x0040) ++#define TIMER_FLAG_MASK_TRIGGER(x) (x & 0x0070) ++#define TIMER_FLAG_MASK_SYNC(x) (x & 0x0080) ++#define TIMER_FLAG_CALLBACK_IN_HB 0x0200 ++#define TIMER_FLAG_MASK_HANDLE(x) (x & 0x0300) ++#define TIMER_FLAG_MASK_SRC(x) (x & 0x1000) ++ ++struct timer_dev_timer { ++ unsigned int f_irq_on; ++ unsigned int irq; ++ unsigned int flag; ++ unsigned long arg1; ++ unsigned long arg2; ++}; ++ ++struct timer_dev { ++ struct mutex gptu_mutex; ++ unsigned int number_of_timers; ++ unsigned int occupation; ++ unsigned int f_gptu_on; ++ struct timer_dev_timer timer[MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2]; ++}; ++ ++ ++unsigned int ltq_get_fpi_bus_clock(int fpi) { ++ struct clk *clk = clk_get_fpi(); ++ return clk_get_rate(clk); ++} ++ ++ ++static long gptu_ioctl(struct file *, unsigned int, unsigned long); ++static int gptu_open(struct inode *, struct file *); ++static int gptu_release(struct inode *, struct file *); ++ ++static struct file_operations gptu_fops = { ++ .owner = THIS_MODULE, ++ .unlocked_ioctl = gptu_ioctl, ++ .open = gptu_open, ++ .release = gptu_release ++}; ++ ++static struct miscdevice gptu_miscdev = { ++ .minor = MISC_DYNAMIC_MINOR, ++ .name = "gptu", ++ .fops = &gptu_fops, ++}; ++ ++static struct timer_dev timer_dev; ++ ++static irqreturn_t timer_irq_handler(int irq, void *p) ++{ ++ unsigned int timer; ++ unsigned int flag; ++ struct timer_dev_timer *dev_timer = (struct timer_dev_timer *)p; ++ ++ timer = irq - TIMER_INTERRUPT; ++ if (timer < timer_dev.number_of_timers ++ && dev_timer == &timer_dev.timer[timer]) { ++ /* Clear interrupt. */ ++ ltq_w32(1 << timer, LQ_GPTU_IRNCR); ++ ++ /* Call user hanler or signal. */ ++ flag = dev_timer->flag; ++ if (!(timer & 0x01) ++ || TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { ++ /* 16-bit timer or timer A of 32-bit timer */ ++ switch (TIMER_FLAG_MASK_HANDLE(flag)) { ++ case TIMER_FLAG_CALLBACK_IN_IRQ: ++ case TIMER_FLAG_CALLBACK_IN_HB: ++ if (dev_timer->arg1) ++ (*(timer_callback)dev_timer->arg1)(dev_timer->arg2); ++ break; ++ case TIMER_FLAG_SIGNAL: ++ send_sig((int)dev_timer->arg2, (struct task_struct *)dev_timer->arg1, 0); ++ break; ++ } ++ } ++ } ++ return IRQ_HANDLED; ++} ++ ++static inline void lq_enable_gptu(void) ++{ ++ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); ++ clk_enable(clk); ++ ++ //ltq_pmu_enable(PMU_GPT); ++ ++ /* Set divider as 1, disable write protection for SPEN, enable module. */ ++ *LQ_GPTU_CLC = ++ GPTU_CLC_SMC_SET(0x00) | ++ GPTU_CLC_RMC_SET(0x01) | ++ GPTU_CLC_FSOE_SET(0) | ++ GPTU_CLC_SBWE_SET(1) | ++ GPTU_CLC_EDIS_SET(0) | ++ GPTU_CLC_SPEN_SET(0) | ++ GPTU_CLC_DISR_SET(0); ++} ++ ++static inline void lq_disable_gptu(void) ++{ ++ struct clk *clk = clk_get_sys("1e100a00.gptu", NULL); ++ ltq_w32(0x00, LQ_GPTU_IRNEN); ++ ltq_w32(0xfff, LQ_GPTU_IRNCR); ++ ++ /* Set divider as 0, enable write protection for SPEN, disable module. */ ++ *LQ_GPTU_CLC = ++ GPTU_CLC_SMC_SET(0x00) | ++ GPTU_CLC_RMC_SET(0x00) | ++ GPTU_CLC_FSOE_SET(0) | ++ GPTU_CLC_SBWE_SET(0) | ++ GPTU_CLC_EDIS_SET(0) | ++ GPTU_CLC_SPEN_SET(0) | ++ GPTU_CLC_DISR_SET(1); ++ ++ clk_enable(clk); ++} ++ ++int lq_request_timer(unsigned int timer, unsigned int flag, ++ unsigned long value, unsigned long arg1, unsigned long arg2) ++{ ++ int ret = 0; ++ unsigned int con_reg, irnen_reg; ++ int n, X; ++ ++ if (timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ printk(KERN_INFO "request_timer(%d, 0x%08X, %lu)...", ++ timer, flag, value); ++ ++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) ++ value &= 0xFFFF; ++ else ++ timer &= ~0x01; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ /* ++ * Allocate timer. ++ */ ++ if (timer < FIRST_TIMER) { ++ unsigned int mask; ++ unsigned int shift; ++ /* This takes care of TIMER1B which is the only choice for Voice TAPI system */ ++ unsigned int offset = TIMER2A; ++ ++ /* ++ * Pick up a free timer. ++ */ ++ if (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT) { ++ mask = 1 << offset; ++ shift = 1; ++ } else { ++ mask = 3 << offset; ++ shift = 2; ++ } ++ for (timer = offset; ++ timer < offset + timer_dev.number_of_timers; ++ timer += shift, mask <<= shift) ++ if (!(timer_dev.occupation & mask)) { ++ timer_dev.occupation |= mask; ++ break; ++ } ++ if (timer >= offset + timer_dev.number_of_timers) { ++ printk("failed![%d]\n", __LINE__); ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } else ++ ret = timer; ++ } else { ++ register unsigned int mask; ++ ++ /* ++ * Check if the requested timer is free. ++ */ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if ((timer_dev.occupation & mask)) { ++ printk("failed![%d] mask %#x, timer_dev.occupation %#x\n", ++ __LINE__, mask, timer_dev.occupation); ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EBUSY; ++ } else { ++ timer_dev.occupation |= mask; ++ ret = 0; ++ } ++ } ++ ++ /* ++ * Prepare control register value. ++ */ ++ switch (TIMER_FLAG_MASK_EDGE(flag)) { ++ default: ++ case TIMER_FLAG_NONE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x00); ++ break; ++ case TIMER_FLAG_RISE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x01); ++ break; ++ case TIMER_FLAG_FALL_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x02); ++ break; ++ case TIMER_FLAG_ANY_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x03); ++ break; ++ } ++ if (TIMER_FLAG_MASK_TYPE(flag) == TIMER_FLAG_TIMER) ++ con_reg |= ++ TIMER_FLAG_MASK_SRC(flag) == ++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : ++ GPTU_CON_SRC_EXT_SET(0); ++ else ++ con_reg |= ++ TIMER_FLAG_MASK_SRC(flag) == ++ TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : ++ GPTU_CON_SRC_EG_SET(0); ++ con_reg |= ++ TIMER_FLAG_MASK_SYNC(flag) == ++ TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : ++ GPTU_CON_SYNC_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_INVERT(flag) == ++ TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_SIZE(flag) == ++ TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : ++ GPTU_CON_EXT_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_STOP(flag) == ++ TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); ++ con_reg |= ++ TIMER_FLAG_MASK_TYPE(flag) == ++ TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : ++ GPTU_CON_CNT_SET(1); ++ con_reg |= ++ TIMER_FLAG_MASK_DIR(flag) == ++ TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); ++ ++ /* ++ * Fill up running data. ++ */ ++ timer_dev.timer[timer - FIRST_TIMER].flag = flag; ++ timer_dev.timer[timer - FIRST_TIMER].arg1 = arg1; ++ timer_dev.timer[timer - FIRST_TIMER].arg2 = arg2; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flag; ++ ++ /* ++ * Enable GPTU module. ++ */ ++ if (!timer_dev.f_gptu_on) { ++ lq_enable_gptu(); ++ timer_dev.f_gptu_on = 1; ++ } ++ ++ /* ++ * Enable IRQ. ++ */ ++ if (TIMER_FLAG_MASK_HANDLE(flag) != TIMER_FLAG_NO_HANDLE) { ++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL) ++ timer_dev.timer[timer - FIRST_TIMER].arg1 = ++ (unsigned long) find_task_by_vpid((int) arg1); ++ ++ irnen_reg = 1 << (timer - FIRST_TIMER); ++ ++ if (TIMER_FLAG_MASK_HANDLE(flag) == TIMER_FLAG_SIGNAL ++ || (TIMER_FLAG_MASK_HANDLE(flag) == ++ TIMER_FLAG_CALLBACK_IN_IRQ ++ && timer_dev.timer[timer - FIRST_TIMER].arg1)) { ++ enable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); ++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 1; ++ } ++ } else ++ irnen_reg = 0; ++ ++ /* ++ * Write config register, reload value and enable interrupt. ++ */ ++ n = timer >> 1; ++ X = timer & 0x01; ++ *LQ_GPTU_CON(n, X) = con_reg; ++ *LQ_GPTU_RELOAD(n, X) = value; ++ /* printk("reload value = %d\n", (u32)value); */ ++ *LQ_GPTU_IRNEN |= irnen_reg; ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ printk("successful!\n"); ++ return ret; ++} ++EXPORT_SYMBOL(lq_request_timer); ++ ++int lq_free_timer(unsigned int timer) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ if (GPTU_CON_EN(n, X)) ++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); ++ ++ *LQ_GPTU_IRNEN &= ~GPTU_IRNEN_TC_SET(n, X, 1); ++ *LQ_GPTU_IRNCR |= GPTU_IRNCR_TC_SET(n, X, 1); ++ ++ if (timer_dev.timer[timer - FIRST_TIMER].f_irq_on) { ++ disable_irq(timer_dev.timer[timer - FIRST_TIMER].irq); ++ timer_dev.timer[timer - FIRST_TIMER].f_irq_on = 0; ++ } ++ ++ timer_dev.occupation &= ~mask; ++ if (!timer_dev.occupation && timer_dev.f_gptu_on) { ++ lq_disable_gptu(); ++ timer_dev.f_gptu_on = 0; ++ } ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_free_timer); ++ ++int lq_start_timer(unsigned int timer, int is_resume) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == ++ TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_RL_SET(!is_resume) | GPTU_RUN_SEN_SET(1); ++ ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_start_timer); ++ ++int lq_stop_timer(unsigned int timer) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER ++ || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *LQ_GPTU_RUN(n, X) = GPTU_RUN_CEN_SET(1); ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_stop_timer); ++ ++int lq_reset_counter_flags(u32 timer, u32 flags) ++{ ++ unsigned int oflag; ++ unsigned int mask, con_reg; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ oflag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(oflag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(oflag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ switch (TIMER_FLAG_MASK_EDGE(flags)) { ++ default: ++ case TIMER_FLAG_NONE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x00); ++ break; ++ case TIMER_FLAG_RISE_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x01); ++ break; ++ case TIMER_FLAG_FALL_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x02); ++ break; ++ case TIMER_FLAG_ANY_EDGE: ++ con_reg = GPTU_CON_EDGE_SET(0x03); ++ break; ++ } ++ if (TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER) ++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EXT_SET(1) : GPTU_CON_SRC_EXT_SET(0); ++ else ++ con_reg |= TIMER_FLAG_MASK_SRC(flags) == TIMER_FLAG_EXT_SRC ? GPTU_CON_SRC_EG_SET(1) : GPTU_CON_SRC_EG_SET(0); ++ con_reg |= TIMER_FLAG_MASK_SYNC(flags) == TIMER_FLAG_UNSYNC ? GPTU_CON_SYNC_SET(0) : GPTU_CON_SYNC_SET(1); ++ con_reg |= TIMER_FLAG_MASK_INVERT(flags) == TIMER_FLAG_REAL ? GPTU_CON_INV_SET(0) : GPTU_CON_INV_SET(1); ++ con_reg |= TIMER_FLAG_MASK_SIZE(flags) == TIMER_FLAG_16BIT ? GPTU_CON_EXT_SET(0) : GPTU_CON_EXT_SET(1); ++ con_reg |= TIMER_FLAG_MASK_STOP(flags) == TIMER_FLAG_ONCE ? GPTU_CON_STP_SET(1) : GPTU_CON_STP_SET(0); ++ con_reg |= TIMER_FLAG_MASK_TYPE(flags) == TIMER_FLAG_TIMER ? GPTU_CON_CNT_SET(0) : GPTU_CON_CNT_SET(1); ++ con_reg |= TIMER_FLAG_MASK_DIR(flags) == TIMER_FLAG_UP ? GPTU_CON_DIR_SET(1) : GPTU_CON_DIR_SET(0); ++ ++ timer_dev.timer[timer - FIRST_TIMER].flag = flags; ++ if (TIMER_FLAG_MASK_SIZE(flags) != TIMER_FLAG_16BIT) ++ timer_dev.timer[timer - FIRST_TIMER + 1].flag = flags; ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *LQ_GPTU_CON(n, X) = con_reg; ++ smp_wmb(); ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return 0; ++} ++EXPORT_SYMBOL(lq_reset_counter_flags); ++ ++int lq_get_count_value(unsigned int timer, unsigned long *value) ++{ ++ unsigned int flag; ++ unsigned int mask; ++ int n, X; ++ ++ if (!timer_dev.f_gptu_on) ++ return -EINVAL; ++ ++ if (timer < FIRST_TIMER ++ || timer >= FIRST_TIMER + timer_dev.number_of_timers) ++ return -EINVAL; ++ ++ mutex_lock(&timer_dev.gptu_mutex); ++ ++ flag = timer_dev.timer[timer - FIRST_TIMER].flag; ++ if (TIMER_FLAG_MASK_SIZE(flag) != TIMER_FLAG_16BIT) ++ timer &= ~0x01; ++ ++ mask = (TIMER_FLAG_MASK_SIZE(flag) == TIMER_FLAG_16BIT ? 1 : 3) << timer; ++ if (((timer_dev.occupation & mask) ^ mask)) { ++ mutex_unlock(&timer_dev.gptu_mutex); ++ return -EINVAL; ++ } ++ ++ n = timer >> 1; ++ X = timer & 0x01; ++ ++ *value = *LQ_GPTU_COUNT(n, X); ++ ++ ++ mutex_unlock(&timer_dev.gptu_mutex); ++ ++ return 0; ++} ++EXPORT_SYMBOL(lq_get_count_value); ++ ++u32 lq_cal_divider(unsigned long freq) ++{ ++ u64 module_freq, fpi = ltq_get_fpi_bus_clock(2); ++ u32 clock_divider = 1; ++ module_freq = fpi * 1000; ++ do_div(module_freq, clock_divider * freq); ++ return module_freq; ++} ++EXPORT_SYMBOL(lq_cal_divider); ++ ++int lq_set_timer(unsigned int timer, unsigned int freq, int is_cyclic, ++ int is_ext_src, unsigned int handle_flag, unsigned long arg1, ++ unsigned long arg2) ++{ ++ unsigned long divider; ++ unsigned int flag; ++ ++ divider = lq_cal_divider(freq); ++ if (divider == 0) ++ return -EINVAL; ++ flag = ((divider & ~0xFFFF) ? TIMER_FLAG_32BIT : TIMER_FLAG_16BIT) ++ | (is_cyclic ? TIMER_FLAG_CYCLIC : TIMER_FLAG_ONCE) ++ | (is_ext_src ? TIMER_FLAG_EXT_SRC : TIMER_FLAG_INT_SRC) ++ | TIMER_FLAG_TIMER | TIMER_FLAG_DOWN ++ | TIMER_FLAG_MASK_HANDLE(handle_flag); ++ ++ printk(KERN_INFO "lq_set_timer(%d, %d), divider = %lu\n", ++ timer, freq, divider); ++ return lq_request_timer(timer, flag, divider, arg1, arg2); ++} ++EXPORT_SYMBOL(lq_set_timer); ++ ++int lq_set_counter(unsigned int timer, unsigned int flag, u32 reload, ++ unsigned long arg1, unsigned long arg2) ++{ ++ printk(KERN_INFO "lq_set_counter(%d, %#x, %d)\n", timer, flag, reload); ++ return lq_request_timer(timer, flag, reload, arg1, arg2); ++} ++EXPORT_SYMBOL(lq_set_counter); ++ ++static long gptu_ioctl(struct file *file, unsigned int cmd, ++ unsigned long arg) ++{ ++ int ret; ++ struct gptu_ioctl_param param; ++ ++ if (!access_ok(VERIFY_READ, arg, sizeof(struct gptu_ioctl_param))) ++ return -EFAULT; ++ copy_from_user(¶m, (void *) arg, sizeof(param)); ++ ++ if ((((cmd == GPTU_REQUEST_TIMER || cmd == GPTU_SET_TIMER ++ || GPTU_SET_COUNTER) && param.timer < 2) ++ || cmd == GPTU_GET_COUNT_VALUE || cmd == GPTU_CALCULATE_DIVIDER) ++ && !access_ok(VERIFY_WRITE, arg, ++ sizeof(struct gptu_ioctl_param))) ++ return -EFAULT; ++ ++ switch (cmd) { ++ case GPTU_REQUEST_TIMER: ++ ret = lq_request_timer(param.timer, param.flag, param.value, ++ (unsigned long) param.pid, ++ (unsigned long) param.sig); ++ if (ret > 0) { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ timer, &ret, sizeof(&ret)); ++ ret = 0; ++ } ++ break; ++ case GPTU_FREE_TIMER: ++ ret = lq_free_timer(param.timer); ++ break; ++ case GPTU_START_TIMER: ++ ret = lq_start_timer(param.timer, param.flag); ++ break; ++ case GPTU_STOP_TIMER: ++ ret = lq_stop_timer(param.timer); ++ break; ++ case GPTU_GET_COUNT_VALUE: ++ ret = lq_get_count_value(param.timer, ¶m.value); ++ if (!ret) ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ value, ¶m.value, ++ sizeof(param.value)); ++ break; ++ case GPTU_CALCULATE_DIVIDER: ++ param.value = lq_cal_divider(param.value); ++ if (param.value == 0) ++ ret = -EINVAL; ++ else { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ value, ¶m.value, ++ sizeof(param.value)); ++ ret = 0; ++ } ++ break; ++ case GPTU_SET_TIMER: ++ ret = lq_set_timer(param.timer, param.value, ++ TIMER_FLAG_MASK_STOP(param.flag) != ++ TIMER_FLAG_ONCE ? 1 : 0, ++ TIMER_FLAG_MASK_SRC(param.flag) == ++ TIMER_FLAG_EXT_SRC ? 1 : 0, ++ TIMER_FLAG_MASK_HANDLE(param.flag) == ++ TIMER_FLAG_SIGNAL ? TIMER_FLAG_SIGNAL : ++ TIMER_FLAG_NO_HANDLE, ++ (unsigned long) param.pid, ++ (unsigned long) param.sig); ++ if (ret > 0) { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ timer, &ret, sizeof(&ret)); ++ ret = 0; ++ } ++ break; ++ case GPTU_SET_COUNTER: ++ lq_set_counter(param.timer, param.flag, param.value, 0, 0); ++ if (ret > 0) { ++ copy_to_user(&((struct gptu_ioctl_param *) arg)-> ++ timer, &ret, sizeof(&ret)); ++ ret = 0; ++ } ++ break; ++ default: ++ ret = -ENOTTY; ++ } ++ ++ return ret; ++} ++ ++static int gptu_open(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++static int gptu_release(struct inode *inode, struct file *file) ++{ ++ return 0; ++} ++ ++int __init lq_gptu_init(void) ++{ ++ int ret; ++ unsigned int i; ++ ++ ltq_w32(0, LQ_GPTU_IRNEN); ++ ltq_w32(0xfff, LQ_GPTU_IRNCR); ++ ++ memset(&timer_dev, 0, sizeof(timer_dev)); ++ mutex_init(&timer_dev.gptu_mutex); ++ ++ lq_enable_gptu(); ++ timer_dev.number_of_timers = GPTU_ID_CFG * 2; ++ lq_disable_gptu(); ++ if (timer_dev.number_of_timers > MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2) ++ timer_dev.number_of_timers = MAX_NUM_OF_32BIT_TIMER_BLOCKS * 2; ++ printk(KERN_INFO "gptu: totally %d 16-bit timers/counters\n", timer_dev.number_of_timers); ++ ++ ret = misc_register(&gptu_miscdev); ++ if (ret) { ++ printk(KERN_ERR "gptu: can't misc_register, get error %d\n", -ret); ++ return ret; ++ } else { ++ printk(KERN_INFO "gptu: misc_register on minor %d\n", gptu_miscdev.minor); ++ } ++ ++ for (i = 0; i < timer_dev.number_of_timers; i++) { ++ ret = request_irq(TIMER_INTERRUPT + i, timer_irq_handler, IRQF_TIMER, gptu_miscdev.name, &timer_dev.timer[i]); ++ if (ret) { ++ for (; i >= 0; i--) ++ free_irq(TIMER_INTERRUPT + i, &timer_dev.timer[i]); ++ misc_deregister(&gptu_miscdev); ++ printk(KERN_ERR "gptu: failed in requesting irq (%d), get error %d\n", i, -ret); ++ return ret; ++ } else { ++ timer_dev.timer[i].irq = TIMER_INTERRUPT + i; ++ disable_irq(timer_dev.timer[i].irq); ++ printk(KERN_INFO "gptu: succeeded to request irq %d\n", timer_dev.timer[i].irq); ++ } ++ } ++ ++ return 0; ++} ++ ++void __exit lq_gptu_exit(void) ++{ ++ unsigned int i; ++ ++ for (i = 0; i < timer_dev.number_of_timers; i++) { ++ if (timer_dev.timer[i].f_irq_on) ++ disable_irq(timer_dev.timer[i].irq); ++ free_irq(timer_dev.timer[i].irq, &timer_dev.timer[i]); ++ } ++ lq_disable_gptu(); ++ misc_deregister(&gptu_miscdev); ++} ++ ++module_init(lq_gptu_init); ++module_exit(lq_gptu_exit); ++ ++#endif diff --git a/target/linux/lantiq/patches-4.14/0018-MTD-nand-lots-of-xrx200-fixes.patch b/target/linux/lantiq/patches-4.14/0018-MTD-nand-lots-of-xrx200-fixes.patch new file mode 100644 index 0000000000..b97967d20e --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0018-MTD-nand-lots-of-xrx200-fixes.patch @@ -0,0 +1,122 @@ +From 997a8965db8417266bea3fbdcfa3e5655a1b52fa Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Tue, 9 Sep 2014 23:12:15 +0200 +Subject: [PATCH 18/36] MTD: nand: lots of xrx200 fixes + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/mtd/nand/xway_nand.c | 63 ++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 63 insertions(+) + +--- a/drivers/mtd/nand/xway_nand.c ++++ b/drivers/mtd/nand/xway_nand.c +@@ -63,6 +63,24 @@ + #define NAND_CON_CSMUX (1 << 1) + #define NAND_CON_NANDM 1 + ++#define DANUBE_PCI_REG32( addr ) (*(volatile u32 *)(addr)) ++#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400) ++#define PCI_CR_PC_ARB (PCI_CR_PR_OFFSET + 0x0080) ++ ++/* ++ * req_mask provides a mechanism to prevent interference between ++ * nand and pci (probably only relevant for the BT Home Hub 2B). ++ * Setting it causes the corresponding pci req pins to be masked ++ * during nand access, and also moves ebu locking from the read/write ++ * functions to the chip select function to ensure that the whole ++ * operation runs with interrupts disabled. ++ * In addition it switches on some extra waiting in xway_cmd_ctrl(). ++ * This seems to be necessary if the ebu_cs1 pin has open-drain disabled, ++ * which in turn seems to be necessary for the nor chip to be recognised ++ * reliably, on a board (Home Hub 2B again) which has both nor and nand. ++ */ ++static __be32 req_mask = 0; ++ + struct xway_nand_data { + struct nand_chip chip; + unsigned long csflags; +@@ -94,10 +112,22 @@ static void xway_select_chip(struct mtd_ + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); ++ ++ if (req_mask) { ++ /* Unmask all external PCI request */ ++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) &= ~(req_mask << 16); ++ } ++ + spin_unlock_irqrestore(&ebu_lock, data->csflags); + break; + case 0: + spin_lock_irqsave(&ebu_lock, data->csflags); ++ ++ if (req_mask) { ++ /* Mask all external PCI request */ ++ DANUBE_PCI_REG32(PCI_CR_PC_ARB) |= (req_mask << 16); ++ } ++ + ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); + break; +@@ -108,6 +138,12 @@ static void xway_select_chip(struct mtd_ + + static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) + { ++ ++ if (req_mask) { ++ if (cmd != NAND_CMD_STATUS) ++ ltq_ebu_w32(0, EBU_NAND_WAIT); /* Clear nand ready */ ++ } ++ + if (cmd == NAND_CMD_NONE) + return; + +@@ -118,6 +154,24 @@ static void xway_cmd_ctrl(struct mtd_inf + + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; ++ ++ if (req_mask) { ++ /* ++ * program and erase have their own busy handlers ++ * status and sequential in needs no delay ++ */ ++ switch (cmd) { ++ case NAND_CMD_ERASE1: ++ case NAND_CMD_SEQIN: ++ case NAND_CMD_STATUS: ++ case NAND_CMD_READID: ++ return; ++ } ++ ++ /* wait until command is processed */ ++ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD) == 0) ++ ; ++ } + } + + static int xway_dev_ready(struct mtd_info *mtd) +@@ -157,6 +211,7 @@ static int xway_nand_probe(struct platfo + int err; + u32 cs; + u32 cs_flag = 0; ++ const __be32 *req_mask_ptr; + + /* Allocate memory for the device structure (and zero it) */ + data = devm_kzalloc(&pdev->dev, sizeof(struct xway_nand_data), +@@ -192,6 +247,15 @@ static int xway_nand_probe(struct platfo + if (!err && cs == 1) + cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1; + ++ req_mask_ptr = of_get_property(pdev->dev.of_node, ++ "req-mask", NULL); ++ ++ /* ++ * Load the PCI req lines to mask from the device tree. If the ++ * property is not present, setting req_mask to 0 disables masking. ++ */ ++ req_mask = (req_mask_ptr ? *req_mask_ptr : 0); ++ + /* setup the EBU to run in NAND mode on our base addr */ + ltq_ebu_w32(CPHYSADDR(data->nandaddr) + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1); diff --git a/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch b/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch new file mode 100644 index 0000000000..64bf2aaca8 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0020-MTD-lantiq-handle-NO_XIP-on-cfi0001-flash.patch @@ -0,0 +1,25 @@ +From e3b20f04e9f9cae1babe091fdc1d08d7703ae344 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 7 Aug 2014 18:18:00 +0200 +Subject: [PATCH 20/36] MTD: lantiq: handle NO_XIP on cfi0001 flash + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/mtd/maps/lantiq-flash.c | 6 +++++- + 1 file changed, 5 insertions(+), 1 deletion(-) + +--- a/drivers/mtd/maps/lantiq-flash.c ++++ b/drivers/mtd/maps/lantiq-flash.c +@@ -137,7 +137,11 @@ ltq_mtd_probe(struct platform_device *pd + if (!ltq_mtd->map) + return -ENOMEM; + +- ltq_mtd->map->phys = ltq_mtd->res->start; ++ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) ++ ltq_mtd->map->phys = NO_XIP; ++ else ++ ltq_mtd->map->phys = ltq_mtd->res->start; ++ ltq_mtd->res->start; + ltq_mtd->map->size = resource_size(ltq_mtd->res); + ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); + if (IS_ERR(ltq_mtd->map->virt)) diff --git a/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch b/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch new file mode 100644 index 0000000000..f08db65046 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0022-MTD-m25p80-allow-loading-mtd-name-from-OF.patch @@ -0,0 +1,44 @@ +From 4400e1f593ea40a51912128adb4f53d59e62cad8 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Wed, 10 Sep 2014 22:40:18 +0200 +Subject: [PATCH 22/36] MTD: m25p80: allow loading mtd name from OF + +In accordance with the physmap flash we should honour the linux,mtd-name +property when deciding what name the mtd device has. + +Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/mtd/devices/m25p80.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/mtd/devices/m25p80.c ++++ b/drivers/mtd/devices/m25p80.c +@@ -19,6 +19,7 @@ + #include <linux/errno.h> + #include <linux/module.h> + #include <linux/device.h> ++#include <linux/of.h> + + #include <linux/mtd/mtd.h> + #include <linux/mtd/partitions.h> +@@ -198,6 +199,10 @@ static int m25p_probe(struct spi_device + enum read_mode mode = SPI_NOR_NORMAL; + char *flash_name; + int ret; ++ const char __maybe_unused *of_mtd_name = NULL; ++ ++ of_property_read_string(spi->dev.of_node, ++ "linux,mtd-name", &of_mtd_name); + + data = dev_get_platdata(&spi->dev); + +@@ -227,6 +232,8 @@ static int m25p_probe(struct spi_device + + if (data && data->name) + nor->mtd.name = data->name; ++ else if (of_mtd_name) ++ nor->mtd.name = of_mtd_name; + + /* For some (historical?) reason many platforms provide two different + * names in flash_platform_data: "name" and "type". Quite often name is diff --git a/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch b/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch new file mode 100644 index 0000000000..e915277599 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0023-NET-PHY-adds-driver-for-lantiq-PHY11G.patch @@ -0,0 +1,294 @@ +From 0a63ab263725c427051a8bbaa0732b749627da27 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 7 Aug 2014 18:15:36 +0200 +Subject: [PATCH 23/36] NET: PHY: adds driver for lantiq PHY11G + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/net/phy/Kconfig | 5 + + drivers/net/phy/Makefile | 1 + + drivers/net/phy/lantiq.c | 231 ++++++++++++++++++++++++++++++++++++++++++++++ + 3 files changed, 237 insertions(+) + create mode 100644 drivers/net/phy/lantiq.c + +--- a/drivers/net/phy/intel-xway.c ++++ b/drivers/net/phy/intel-xway.c +@@ -152,6 +152,51 @@ + #define PHY_ID_PHY11G_VR9 0xD565A409 + #define PHY_ID_PHY22F_VR9 0xD565A419 + ++#if IS_ENABLED(CONFIG_OF_MDIO) ++static int vr9_gphy_of_reg_init(struct phy_device *phydev) ++{ ++ u32 tmp; ++ ++ /* store the led values if one was passed by the devicetree */ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledch", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCH, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,ledcl", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LEDCL, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0h", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0H, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led0l", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED0L, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1h", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1H, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led1l", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED1L, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2h", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led2l", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3h", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3H, MDIO_MMD_VEND2, tmp); ++ ++ if (!of_property_read_u32(phydev->mdio.dev.of_node, "lantiq,led3l", &tmp)) ++ phy_write_mmd_indirect(phydev, XWAY_MMD_LED3L, MDIO_MMD_VEND2, tmp); ++ ++ return 0; ++} ++#else ++static int vr9_gphy_of_reg_init(struct phy_device *phydev) ++{ ++ return 0; ++} ++#endif /* CONFIG_OF_MDIO */ ++ + static int xway_gphy_config_init(struct phy_device *phydev) + { + int err; +@@ -190,6 +235,7 @@ static int xway_gphy_config_init(struct + phy_write_mmd_indirect(phydev, XWAY_MMD_LED2H, MDIO_MMD_VEND2, ledxh); + phy_write_mmd_indirect(phydev, XWAY_MMD_LED2L, MDIO_MMD_VEND2, ledxl); + ++ vr9_gphy_of_reg_init(phydev); + return 0; + } + +--- /dev/null ++++ b/Documentation/devicetree/bindings/phy/phy-lanitq.txt +@@ -0,0 +1,216 @@ ++Lanitq PHY binding ++============================================ ++ ++This devicetree binding controls the lantiq ethernet phys led functionality. ++ ++Example: ++ mdio@0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ compatible = "lantiq,xrx200-mdio"; ++ phy5: ethernet-phy@5 { ++ reg = <0x1>; ++ compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; ++ }; ++ phy11: ethernet-phy@11 { ++ reg = <0x11>; ++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; ++ lantiq,led2h = <0x00>; ++ lantiq,led2l = <0x03>; ++ }; ++ phy12: ethernet-phy@12 { ++ reg = <0x12>; ++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; ++ lantiq,led1h = <0x00>; ++ lantiq,led1l = <0x03>; ++ }; ++ phy13: ethernet-phy@13 { ++ reg = <0x13>; ++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; ++ lantiq,led2h = <0x00>; ++ lantiq,led2l = <0x03>; ++ }; ++ phy14: ethernet-phy@14 { ++ reg = <0x14>; ++ compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; ++ lantiq,led1h = <0x00>; ++ lantiq,led1l = <0x03>; ++ }; ++ }; ++ ++Register Description ++============================================ ++ ++LEDCH: ++ ++Name Hardware Reset Value ++LEDCH 0x00C5 ++ ++| 15 | | | | | | | 8 | ++========================================= ++| RES | ++========================================= ++ ++| 7 | | | | | | | 0 | ++========================================= ++| FBF | SBF |RES | NACS | ++========================================= ++ ++Field Bits Type Description ++FBF 7:6 RW Fast Blink Frequency ++ --- ++ 0x0 (00b) F02HZ 2 Hz blinking frequency ++ 0x1 (01b) F04HZ 4 Hz blinking frequency ++ 0x2 (10b) F08HZ 8 Hz blinking frequency ++ 0x3 (11b) F16HZ 16 Hz blinking frequency ++ ++SBF 5:4 RW Slow Blink Frequency ++ --- ++ 0x0 (00b) F02HZ 2 Hz blinking frequency ++ 0x1 (01b) F04HZ 4 Hz blinking frequency ++ 0x2 (10b) F08HZ 8 Hz blinking frequency ++ 0x3 (11b) F16HZ 16 Hz blinking frequency ++ ++NACS 2:0 RW Inverse of Scan Function ++ --- ++ 0x0 (000b) NONE No Function ++ 0x1 (001b) LINK Complex function enabled when link is up ++ 0x2 (010b) PDOWN Complex function enabled when device is powered-down ++ 0x3 (011b) EEE Complex function enabled when device is in EEE mode ++ 0x4 (100b) ANEG Complex function enabled when auto-negotiation is running ++ 0x5 (101b) ABIST Complex function enabled when analog self-test is running ++ 0x6 (110b) CDIAG Complex function enabled when cable diagnostics are running ++ 0x7 (111b) TEST Complex function enabled when test mode is running ++ ++LEDCL: ++ ++Name Hardware Reset Value ++LEDCL 0x0067 ++ ++| 15 | | | | | | | 8 | ++========================================= ++| RES | ++========================================= ++ ++| 7 | | | | | | | 0 | ++========================================= ++|RES | SCAN |RES | CBLINK | ++========================================= ++ ++Field Bits Type Description ++SCAN 6:4 RW Complex Scan Configuration ++ --- ++ 000 B NONE No Function ++ 001 B LINK Complex function enabled when link is up ++ 010 B PDOWN Complex function enabled when device is powered-down ++ 011 B EEE Complex function enabled when device is in EEE mode ++ 100 B ANEG Complex function enabled when auto-negotiation is running ++ 101 B ABIST Complex function enabled when analog self-test is running ++ 110 B CDIAG Complex function enabled when cable diagnostics are running ++ 111 B TEST Complex function enabled when test mode is running ++ ++CBLINK 2:0 RW Complex Blinking Configuration ++ --- ++ 000 B NONE No Function ++ 001 B LINK Complex function enabled when link is up ++ 010 B PDOWN Complex function enabled when device is powered-down ++ 011 B EEE Complex function enabled when device is in EEE mode ++ 100 B ANEG Complex function enabled when auto-negotiation is running ++ 101 B ABIST Complex function enabled when analog self-test is running ++ 110 B CDIAG Complex function enabled when cable diagnostics are running ++ 111 B TEST Complex function enabled when test mode is running ++ ++LEDxH: ++ ++Name Hardware Reset Value ++LED0H 0x0070 ++LED1H 0x0020 ++LED2H 0x0040 ++LED3H 0x0040 ++ ++| 15 | | | | | | | 8 | ++========================================= ++| RES | ++========================================= ++ ++| 7 | | | | | | | 0 | ++========================================= ++| CON | BLINKF | ++========================================= ++ ++Field Bits Type Description ++CON 7:4 RW Constant On Configuration ++ --- ++ 0x0 (0000b) NONE LED does not light up constantly ++ 0x1 (0001b) LINK10 LED is on when link is 10 Mbit/s ++ 0x2 (0010b) LINK100 LED is on when link is 100 Mbit/s ++ 0x3 (0011b) LINK10X LED is on when link is 10/100 Mbit/s ++ 0x4 (0100b) LINK1000 LED is on when link is 1000 Mbit/s ++ 0x5 (0101b) LINK10_0 LED is on when link is 10/1000 Mbit/s ++ 0x6 (0110b) LINK100X LED is on when link is 100/1000 Mbit/s ++ 0x7 (0111b) LINK10XX LED is on when link is 10/100/1000 Mbit/s ++ 0x8 (1000b) PDOWN LED is on when device is powered-down ++ 0x9 (1001b) EEE LED is on when device is in EEE mode ++ 0xA (1010b) ANEG LED is on when auto-negotiation is running ++ 0xB (1011b) ABIST LED is on when analog self-test is running ++ 0xC (1100b) CDIAG LED is on when cable diagnostics are running ++ ++BLINKF 3:0 RW Fast Blinking Configuration ++ --- ++ 0x0 (0000b) NONE No Blinking ++ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s ++ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s ++ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s ++ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s ++ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s ++ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s ++ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s ++ 0x8 (1000b) PDOWN Blink when device is powered-down ++ 0x9 (1001b) EEE Blink when device is in EEE mode ++ 0xA (1010b) ANEG Blink when auto-negotiation is running ++ 0xB (1011b) ABIST Blink when analog self-test is running ++ 0xC (1100b) CDIAG Blink when cable diagnostics are running ++ ++LEDxL: ++ ++Name Hardware Reset Value ++LED0L 0x0003 ++LED1L 0x0000 ++LED2L 0x0000 ++LED3L 0x0020 ++ ++| 15 | | | | | | | 8 | ++========================================= ++| RES | ++========================================= ++ ++| 7 | | | | | | | 0 | ++========================================= ++| BLINKS | PULSE | ++========================================= ++ ++Field Bits Type Description ++BLINKS 7:4 RW Slow Blinkin Configuration ++ --- ++ 0x0 (0000b) NONE No Blinking ++ 0x1 (0001b) LINK10 Blink when link is 10 Mbit/s ++ 0x2 (0010b) LINK100 Blink when link is 100 Mbit/s ++ 0x3 (0011b) LINK10X Blink when link is 10/100 Mbit/s ++ 0x4 (0100b) LINK1000 Blink when link is 1000 Mbit/s ++ 0x5 (0101b) LINK10_0 Blink when link is 10/1000 Mbit/s ++ 0x6 (0110b) LINK100X Blink when link is 100/1000 Mbit/s ++ 0x7 (0111b) LINK10XX Blink when link is 10/100/1000 Mbit/s ++ 0x8 (1000b) PDOWN Blink when device is powered-down ++ 0x9 (1001b) EEE Blink when device is in EEE mode ++ 0xA (1010b) ANEG Blink when auto-negotiation is running ++ 0xB (1011b) ABIST Blink when analog self-test is running ++ 0xC (1100b) CDIAG Blink when cable diagnostics are runningning ++ ++PULSE 3:0 RW Pulsing Configuration ++ The pulse field is a mask field by which certain events can be combined ++ --- ++ 0x0 (0000b) NONE No pulsing ++ 0x1 (0001b) TXACT Transmit activity ++ 0x2 (0010b) RXACT Receive activity ++ 0x4 (0100b) COL Collision ++ 0x8 (1000b) RES Reserved diff --git a/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch b/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch new file mode 100644 index 0000000000..e62ff2f698 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0024-NET-lantiq-adds-PHY11G-firmware-blobs.patch @@ -0,0 +1,364 @@ +From 77e89d5a28be35058041c79e9874ab26f222c603 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 22 Oct 2012 09:26:24 +0200 +Subject: [PATCH 24/36] NET: lantiq: adds PHY11G firmware blobs + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + firmware/Makefile | 4 + + firmware/lantiq/COPYING | 286 +++++++++++++++++++++++++++++++++++++++++++++++ + firmware/lantiq/README | 45 ++++++++ + 3 files changed, 335 insertions(+) + create mode 100644 firmware/lantiq/COPYING + create mode 100644 firmware/lantiq/README + +--- a/firmware/Makefile ++++ b/firmware/Makefile +@@ -134,6 +134,10 @@ fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_P + fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw + fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw + fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a14.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy11g_a22.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a14.bin ++fw-shipped-$(CONFIG_LANTIQ_XRX200) += lantiq/xrx200_phy22f_a22.bin + fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin + + fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-) +--- /dev/null ++++ b/firmware/lantiq/COPYING +@@ -0,0 +1,286 @@ ++All firmware files are copyrighted by Lantiq Deutschland GmbH. ++The files have been extracted from header files found in Lantiq BSPs. ++If not stated otherwise all files are licensed under GPL. ++ ++======================================================================= ++ ++ GNU GENERAL PUBLIC LICENSE ++ Version 2, June 1991 ++ ++ Copyright (C) 1989, 1991 Free Software Foundation, Inc. ++ 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ Everyone is permitted to copy and distribute verbatim copies ++ of this license document, but changing it is not allowed. ++ ++ Preamble ++ ++ The licenses for most software are designed to take away your ++freedom to share and change it. By contrast, the GNU General Public ++License is intended to guarantee your freedom to share and change free ++software--to make sure the software is free for all its users. This ++General Public License applies to most of the Free Software ++Foundation's software and to any other program whose authors commit to ++using it. (Some other Free Software Foundation software is covered by ++the GNU Library General Public License instead.) You can apply it to ++your programs, too. ++ ++ When we speak of free software, we are referring to freedom, not ++price. Our General Public Licenses are designed to make sure that you ++have the freedom to distribute copies of free software (and charge for ++this service if you wish), that you receive source code or can get it ++if you want it, that you can change the software or use pieces of it ++in new free programs; and that you know you can do these things. ++ ++ To protect your rights, we need to make restrictions that forbid ++anyone to deny you these rights or to ask you to surrender the rights. ++These restrictions translate to certain responsibilities for you if you ++distribute copies of the software, or if you modify it. ++ ++ For example, if you distribute copies of such a program, whether ++gratis or for a fee, you must give the recipients all the rights that ++you have. You must make sure that they, too, receive or can get the ++source code. And you must show them these terms so they know their ++rights. ++ ++ We protect your rights with two steps: (1) copyright the software, and ++(2) offer you this license which gives you legal permission to copy, ++distribute and/or modify the software. ++ ++ Also, for each author's protection and ours, we want to make certain ++that everyone understands that there is no warranty for this free ++software. If the software is modified by someone else and passed on, we ++want its recipients to know that what they have is not the original, so ++that any problems introduced by others will not reflect on the original ++authors' reputations. ++ ++ Finally, any free program is threatened constantly by software ++patents. We wish to avoid the danger that redistributors of a free ++program will individually obtain patent licenses, in effect making the ++program proprietary. To prevent this, we have made it clear that any ++patent must be licensed for everyone's free use or not licensed at all. ++ ++ The precise terms and conditions for copying, distribution and ++modification follow. ++ ++ GNU GENERAL PUBLIC LICENSE ++ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION ++ ++ 0. This License applies to any program or other work which contains ++a notice placed by the copyright holder saying it may be distributed ++under the terms of this General Public License. The "Program", below, ++refers to any such program or work, and a "work based on the Program" ++means either the Program or any derivative work under copyright law: ++that is to say, a work containing the Program or a portion of it, ++either verbatim or with modifications and/or translated into another ++language. (Hereinafter, translation is included without limitation in ++the term "modification".) Each licensee is addressed as "you". ++ ++Activities other than copying, distribution and modification are not ++covered by this License; they are outside its scope. The act of ++running the Program is not restricted, and the output from the Program ++is covered only if its contents constitute a work based on the ++Program (independent of having been made by running the Program). ++Whether that is true depends on what the Program does. ++ ++ 1. You may copy and distribute verbatim copies of the Program's ++source code as you receive it, in any medium, provided that you ++conspicuously and appropriately publish on each copy an appropriate ++copyright notice and disclaimer of warranty; keep intact all the ++notices that refer to this License and to the absence of any warranty; ++and give any other recipients of the Program a copy of this License ++along with the Program. ++ ++You may charge a fee for the physical act of transferring a copy, and ++you may at your option offer warranty protection in exchange for a fee. ++ ++ 2. You may modify your copy or copies of the Program or any portion ++of it, thus forming a work based on the Program, and copy and ++distribute such modifications or work under the terms of Section 1 ++above, provided that you also meet all of these conditions: ++ ++ a) You must cause the modified files to carry prominent notices ++ stating that you changed the files and the date of any change. ++ ++ b) You must cause any work that you distribute or publish, that in ++ whole or in part contains or is derived from the Program or any ++ part thereof, to be licensed as a whole at no charge to all third ++ parties under the terms of this License. ++ ++ c) If the modified program normally reads commands interactively ++ when run, you must cause it, when started running for such ++ interactive use in the most ordinary way, to print or display an ++ announcement including an appropriate copyright notice and a ++ notice that there is no warranty (or else, saying that you provide ++ a warranty) and that users may redistribute the program under ++ these conditions, and telling the user how to view a copy of this ++ License. (Exception: if the Program itself is interactive but ++ does not normally print such an announcement, your work based on ++ the Program is not required to print an announcement.) ++ ++These requirements apply to the modified work as a whole. If ++identifiable sections of that work are not derived from the Program, ++and can be reasonably considered independent and separate works in ++themselves, then this License, and its terms, do not apply to those ++sections when you distribute them as separate works. But when you ++distribute the same sections as part of a whole which is a work based ++on the Program, the distribution of the whole must be on the terms of ++this License, whose permissions for other licensees extend to the ++entire whole, and thus to each and every part regardless of who wrote it. ++ ++Thus, it is not the intent of this section to claim rights or contest ++your rights to work written entirely by you; rather, the intent is to ++exercise the right to control the distribution of derivative or ++collective works based on the Program. ++ ++In addition, mere aggregation of another work not based on the Program ++with the Program (or with a work based on the Program) on a volume of ++a storage or distribution medium does not bring the other work under ++the scope of this License. ++ ++ 3. You may copy and distribute the Program (or a work based on it, ++under Section 2) in object code or executable form under the terms of ++Sections 1 and 2 above provided that you also do one of the following: ++ ++ a) Accompany it with the complete corresponding machine-readable ++ source code, which must be distributed under the terms of Sections ++ 1 and 2 above on a medium customarily used for software interchange; or, ++ ++ b) Accompany it with a written offer, valid for at least three ++ years, to give any third party, for a charge no more than your ++ cost of physically performing source distribution, a complete ++ machine-readable copy of the corresponding source code, to be ++ distributed under the terms of Sections 1 and 2 above on a medium ++ customarily used for software interchange; or, ++ ++ c) Accompany it with the information you received as to the offer ++ to distribute corresponding source code. (This alternative is ++ allowed only for noncommercial distribution and only if you ++ received the program in object code or executable form with such ++ an offer, in accord with Subsection b above.) ++ ++The source code for a work means the preferred form of the work for ++making modifications to it. For an executable work, complete source ++code means all the source code for all modules it contains, plus any ++associated interface definition files, plus the scripts used to ++control compilation and installation of the executable. However, as a ++special exception, the source code distributed need not include ++anything that is normally distributed (in either source or binary ++form) with the major components (compiler, kernel, and so on) of the ++operating system on which the executable runs, unless that component ++itself accompanies the executable. ++ ++If distribution of executable or object code is made by offering ++access to copy from a designated place, then offering equivalent ++access to copy the source code from the same place counts as ++distribution of the source code, even though third parties are not ++compelled to copy the source along with the object code. ++ ++ 4. You may not copy, modify, sublicense, or distribute the Program ++except as expressly provided under this License. Any attempt ++otherwise to copy, modify, sublicense or distribute the Program is ++void, and will automatically terminate your rights under this License. ++However, parties who have received copies, or rights, from you under ++this License will not have their licenses terminated so long as such ++parties remain in full compliance. ++ ++ 5. You are not required to accept this License, since you have not ++signed it. However, nothing else grants you permission to modify or ++distribute the Program or its derivative works. These actions are ++prohibited by law if you do not accept this License. Therefore, by ++modifying or distributing the Program (or any work based on the ++Program), you indicate your acceptance of this License to do so, and ++all its terms and conditions for copying, distributing or modifying ++the Program or works based on it. ++ ++ 6. Each time you redistribute the Program (or any work based on the ++Program), the recipient automatically receives a license from the ++original licensor to copy, distribute or modify the Program subject to ++these terms and conditions. You may not impose any further ++restrictions on the recipients' exercise of the rights granted herein. ++You are not responsible for enforcing compliance by third parties to ++this License. ++ ++ 7. If, as a consequence of a court judgment or allegation of patent ++infringement or for any other reason (not limited to patent issues), ++conditions are imposed on you (whether by court order, agreement or ++otherwise) that contradict the conditions of this License, they do not ++excuse you from the conditions of this License. If you cannot ++distribute so as to satisfy simultaneously your obligations under this ++License and any other pertinent obligations, then as a consequence you ++may not distribute the Program at all. For example, if a patent ++license would not permit royalty-free redistribution of the Program by ++all those who receive copies directly or indirectly through you, then ++the only way you could satisfy both it and this License would be to ++refrain entirely from distribution of the Program. ++ ++If any portion of this section is held invalid or unenforceable under ++any particular circumstance, the balance of the section is intended to ++apply and the section as a whole is intended to apply in other ++circumstances. ++ ++It is not the purpose of this section to induce you to infringe any ++patents or other property right claims or to contest validity of any ++such claims; this section has the sole purpose of protecting the ++integrity of the free software distribution system, which is ++implemented by public license practices. Many people have made ++generous contributions to the wide range of software distributed ++through that system in reliance on consistent application of that ++system; it is up to the author/donor to decide if he or she is willing ++to distribute software through any other system and a licensee cannot ++impose that choice. ++ ++This section is intended to make thoroughly clear what is believed to ++be a consequence of the rest of this License. ++ ++ 8. If the distribution and/or use of the Program is restricted in ++certain countries either by patents or by copyrighted interfaces, the ++original copyright holder who places the Program under this License ++may add an explicit geographical distribution limitation excluding ++those countries, so that distribution is permitted only in or among ++countries not thus excluded. In such case, this License incorporates ++the limitation as if written in the body of this License. ++ ++ 9. The Free Software Foundation may publish revised and/or new versions ++of the General Public License from time to time. Such new versions will ++be similar in spirit to the present version, but may differ in detail to ++address new problems or concerns. ++ ++Each version is given a distinguishing version number. If the Program ++specifies a version number of this License which applies to it and "any ++later version", you have the option of following the terms and conditions ++either of that version or of any later version published by the Free ++Software Foundation. If the Program does not specify a version number of ++this License, you may choose any version ever published by the Free Software ++Foundation. ++ ++ 10. If you wish to incorporate parts of the Program into other free ++programs whose distribution conditions are different, write to the author ++to ask for permission. For software which is copyrighted by the Free ++Software Foundation, write to the Free Software Foundation; we sometimes ++make exceptions for this. Our decision will be guided by the two goals ++of preserving the free status of all derivatives of our free software and ++of promoting the sharing and reuse of software generally. ++ ++ NO WARRANTY ++ ++ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY ++FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN ++OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES ++PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED ++OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS ++TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE ++PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, ++REPAIR OR CORRECTION. ++ ++ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING ++WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR ++REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, ++INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING ++OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED ++TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY ++YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER ++PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE ++POSSIBILITY OF SUCH DAMAGES. ++ ++ END OF TERMS AND CONDITIONS +--- /dev/null ++++ b/firmware/lantiq/README +@@ -0,0 +1,45 @@ ++# ++# This program is free software; you can redistribute it and/or ++# modify it under the terms of the GNU General Public License as ++# published by the Free Software Foundation; either version 2 of ++# the License, or (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 59 Temple Place, Suite 330, Boston, ++# MA 02111-1307 USA ++# ++# (C) Copyright 2007 - 2012 ++# Lantiq Deutschland GmbH ++# ++# (C) Copyright 2012 ++# Daniel Schwierzeck <daniel.schwierzeck@googlemail.com> ++# ++ ++# ++# How to use ++# ++Configure kernel with: ++CONFIG_FW_LOADER=y ++CONFIG_EXTRA_FIRMWARE_DIR="FIRMWARE_DIR" ++CONFIG_EXTRA_FIRMWARE="FIRMWARE_FILES" ++ ++where FIRMWARE_DIR should point to this git tree and FIRMWARE_FILES is a list ++of space separated files from list below. ++ ++# ++# Firmware files ++# ++ ++# GPHY core on Lantiq XWAY VR9 v1.1 ++lantiq/xrx200_phy11g_a14.bin ++lantiq/xrx200_phy22f_a14.bin ++ ++# GPHY core on Lantiq XWAY VR9 v1.2 ++lantiq/xrx200_phy11g_a22.bin ++lantiq/xrx200_phy22f_a22.bin diff --git a/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch b/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch new file mode 100644 index 0000000000..5224e7a00b --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0025-NET-MIPS-lantiq-adds-xrx200-net.patch @@ -0,0 +1,3394 @@ +From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 22 Oct 2012 12:22:23 +0200 +Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net + +--- + drivers/net/ethernet/Kconfig | 8 +- + drivers/net/ethernet/Makefile | 1 + + drivers/net/ethernet/lantiq_pce.h | 163 +++ + drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++ + drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++ + 5 files changed, 3297 insertions(+), 1 deletion(-) + create mode 100644 drivers/net/ethernet/lantiq_pce.h + create mode 100644 drivers/net/ethernet/lantiq_xrx200.c + create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h + +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -104,7 +104,13 @@ config LANTIQ_ETOP + tristate "Lantiq SoC ETOP driver" + depends on SOC_TYPE_XWAY + ---help--- +- Support for the MII0 inside the Lantiq SoC ++ Support for the MII0 inside the Lantiq ADSL SoC ++ ++config LANTIQ_XRX200 ++ tristate "Lantiq SoC XRX200 driver" ++ depends on SOC_TYPE_XWAY ++ ---help--- ++ Support for the MII0 inside the Lantiq VDSL SoC + + source "drivers/net/ethernet/marvell/Kconfig" + source "drivers/net/ethernet/mediatek/Kconfig" +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -46,6 +46,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal + obj-$(CONFIG_JME) += jme.o + obj-$(CONFIG_KORINA) += korina.o + obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o ++obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o + obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/ + obj-$(CONFIG_NET_VENDOR_MEDIATEK) += mediatek/ + obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/ +--- /dev/null ++++ b/drivers/net/ethernet/lantiq_pce.h +@@ -0,0 +1,163 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2010 Lantiq Deutschland GmbH ++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> ++ * ++ * PCE microcode extracted from UGW5.2 switch api ++ */ ++ ++/* Switch API Micro Code V0.3 */ ++enum { ++ OUT_MAC0 = 0, ++ OUT_MAC1, ++ OUT_MAC2, ++ OUT_MAC3, ++ OUT_MAC4, ++ OUT_MAC5, ++ OUT_ETHTYP, ++ OUT_VTAG0, ++ OUT_VTAG1, ++ OUT_ITAG0, ++ OUT_ITAG1, /*10 */ ++ OUT_ITAG2, ++ OUT_ITAG3, ++ OUT_IP0, ++ OUT_IP1, ++ OUT_IP2, ++ OUT_IP3, ++ OUT_SIP0, ++ OUT_SIP1, ++ OUT_SIP2, ++ OUT_SIP3, /*20*/ ++ OUT_SIP4, ++ OUT_SIP5, ++ OUT_SIP6, ++ OUT_SIP7, ++ OUT_DIP0, ++ OUT_DIP1, ++ OUT_DIP2, ++ OUT_DIP3, ++ OUT_DIP4, ++ OUT_DIP5, /*30*/ ++ OUT_DIP6, ++ OUT_DIP7, ++ OUT_SESID, ++ OUT_PROT, ++ OUT_APP0, ++ OUT_APP1, ++ OUT_IGMP0, ++ OUT_IGMP1, ++ OUT_IPOFF, /*39*/ ++ OUT_NONE = 63 ++}; ++ ++/* parser's microcode length type */ ++#define INSTR 0 ++#define IPV6 1 ++#define LENACCU 2 ++ ++/* parser's microcode flag type */ ++enum { ++ FLAG_ITAG = 0, ++ FLAG_VLAN, ++ FLAG_SNAP, ++ FLAG_PPPOE, ++ FLAG_IPV6, ++ FLAG_IPV6FL, ++ FLAG_IPV4, ++ FLAG_IGMP, ++ FLAG_TU, ++ FLAG_HOP, ++ FLAG_NN1, /*10 */ ++ FLAG_NN2, ++ FLAG_END, ++ FLAG_NO, /*13*/ ++}; ++ ++/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */ ++#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \ ++ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }} ++struct pce_microcode { ++ unsigned short val[4]; ++/* unsigned short val_2; ++ unsigned short val_1; ++ unsigned short val_0;*/ ++} pce_microcode[] = { ++ /* value mask ns fields L type flags ipv4_len */ ++ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0), ++ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), ++ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), ++ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0), ++ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0), ++ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1), ++ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0), ++ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0), ++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0), ++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0), ++ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0), ++ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0), ++ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0), ++}; +--- /dev/null ++++ b/drivers/net/ethernet/lantiq_xrx200.c +@@ -0,0 +1,1851 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2010 Lantiq Deutschland ++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/switch.h> ++#include <linux/etherdevice.h> ++#include <linux/module.h> ++#include <linux/platform_device.h> ++#include <linux/interrupt.h> ++#include <linux/clk.h> ++#include <linux/if_vlan.h> ++#include <asm/delay.h> ++ ++#include <linux/of_net.h> ++#include <linux/of_mdio.h> ++#include <linux/of_gpio.h> ++ ++#include <xway_dma.h> ++#include <lantiq_soc.h> ++ ++#include "lantiq_pce.h" ++#include "lantiq_xrx200_sw.h" ++ ++#define SW_POLLING ++#define SW_ROUTING ++ ++#ifdef SW_ROUTING ++#define XRX200_MAX_DEV 2 ++#else ++#define XRX200_MAX_DEV 1 ++#endif ++ ++#define XRX200_MAX_VLAN 64 ++#define XRX200_PCE_ACTVLAN_IDX 0x01 ++#define XRX200_PCE_VLANMAP_IDX 0x02 ++ ++#define XRX200_MAX_PORT 7 ++#define XRX200_MAX_DMA 8 ++ ++#define XRX200_HEADROOM 4 ++ ++#define XRX200_TX_TIMEOUT (10 * HZ) ++ ++/* port type */ ++#define XRX200_PORT_TYPE_PHY 1 ++#define XRX200_PORT_TYPE_MAC 2 ++ ++/* DMA */ ++#define XRX200_DMA_DATA_LEN 0x600 ++#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0 ++#define XRX200_DMA_RX 0 ++#define XRX200_DMA_TX 1 ++#define XRX200_DMA_TX_2 3 ++#define XRX200_DMA_IS_TX(x) (x%2) ++#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x)) ++ ++/* fetch / store dma */ ++#define FDMA_PCTRL0 0x2A00 ++#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18)) ++#define SDMA_PCTRL0 0x2F00 ++#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18)) ++ ++/* buffer management */ ++#define BM_PCFG0 0x200 ++#define BM_PCFGx(x) (BM_PCFG0 + (x * 8)) ++ ++/* MDIO */ ++#define MDIO_GLOB 0x0000 ++#define MDIO_CTRL 0x0020 ++#define MDIO_READ 0x0024 ++#define MDIO_WRITE 0x0028 ++#define MDIO_PHY0 0x0054 ++#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned))) ++#define MDIO_CLK_CFG0 0x002C ++#define MDIO_CLK_CFG1 0x0030 ++ ++#define MDIO_GLOB_ENABLE 0x8000 ++#define MDIO_BUSY BIT(12) ++#define MDIO_RD BIT(11) ++#define MDIO_WR BIT(10) ++#define MDIO_MASK 0x1f ++#define MDIO_ADDRSHIFT 5 ++#define MDIO1_25MHZ 9 ++ ++#define MDIO_PHY_LINK_DOWN 0x4000 ++#define MDIO_PHY_LINK_UP 0x2000 ++ ++#define MDIO_PHY_SPEED_M10 0x0000 ++#define MDIO_PHY_SPEED_M100 0x0800 ++#define MDIO_PHY_SPEED_G1 0x1000 ++ ++#define MDIO_PHY_FDUP_EN 0x0200 ++#define MDIO_PHY_FDUP_DIS 0x0600 ++ ++#define MDIO_PHY_LINK_MASK 0x6000 ++#define MDIO_PHY_SPEED_MASK 0x1800 ++#define MDIO_PHY_FDUP_MASK 0x0600 ++#define MDIO_PHY_ADDR_MASK 0x001f ++#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \ ++ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK ++ ++/* MII */ ++#define MII_CFG(p) (p * 8) ++ ++#define MII_CFG_EN BIT(14) ++ ++#define MII_CFG_MODE_MIIP 0x0 ++#define MII_CFG_MODE_MIIM 0x1 ++#define MII_CFG_MODE_RMIIP 0x2 ++#define MII_CFG_MODE_RMIIM 0x3 ++#define MII_CFG_MODE_RGMII 0x4 ++#define MII_CFG_MODE_MASK 0xf ++ ++#define MII_CFG_RATE_M2P5 0x00 ++#define MII_CFG_RATE_M25 0x10 ++#define MII_CFG_RATE_M125 0x20 ++#define MII_CFG_RATE_M50 0x30 ++#define MII_CFG_RATE_AUTO 0x40 ++#define MII_CFG_RATE_MASK 0x70 ++ ++/* cpu port mac */ ++#define PMAC_HD_CTL 0x0000 ++#define PMAC_RX_IPG 0x0024 ++#define PMAC_EWAN 0x002c ++ ++#define PMAC_IPG_MASK 0xf ++#define PMAC_HD_CTL_AS 0x0008 ++#define PMAC_HD_CTL_AC 0x0004 ++#define PMAC_HD_CTL_RC 0x0010 ++#define PMAC_HD_CTL_RXSH 0x0040 ++#define PMAC_HD_CTL_AST 0x0080 ++#define PMAC_HD_CTL_RST 0x0100 ++ ++/* PCE */ ++#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4)) ++#define PCE_TBL_MASK 0x1120 ++#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4)) ++#define PCE_TBL_ADDR 0x1138 ++#define PCE_TBL_CTRL 0x113c ++#define PCE_PMAP1 0x114c ++#define PCE_PMAP2 0x1150 ++#define PCE_PMAP3 0x1154 ++#define PCE_GCTRL_REG(x) (0x1158 + (x * 4)) ++#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4)) ++ ++#define PCE_TBL_BUSY BIT(15) ++#define PCE_TBL_CFG_ADDR_MASK 0x1f ++#define PCE_TBL_CFG_ADWR 0x20 ++#define PCE_TBL_CFG_ADWR_MASK 0x60 ++#define PCE_INGRESS BIT(11) ++ ++/* MAC */ ++#define MAC_FLEN_REG (0x2314) ++#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4)) ++ ++/* buffer management */ ++#define BM_PCFG(p) (0x200 + (p * 8)) ++ ++/* special tag in TX path header */ ++#define SPID_SHIFT 24 ++#define DPID_SHIFT 16 ++#define DPID_ENABLE 1 ++#define SPID_CPU_PORT 2 ++#define PORT_MAP_SEL BIT(15) ++#define PORT_MAP_EN BIT(14) ++#define PORT_MAP_SHIFT 1 ++#define PORT_MAP_MASK 0x3f ++ ++#define SPPID_MASK 0x7 ++#define SPPID_SHIFT 4 ++ ++/* MII regs not yet in linux */ ++#define MDIO_DEVAD_NONE (-1) ++#define ADVERTIZE_MPD (1 << 10) ++ ++struct xrx200_port { ++ u8 num; ++ u8 phy_addr; ++ u16 flags; ++ phy_interface_t phy_if; ++ ++ int link; ++ int gpio; ++ enum of_gpio_flags gpio_flags; ++ ++ struct phy_device *phydev; ++ struct device_node *phy_node; ++}; ++ ++struct xrx200_chan { ++ int idx; ++ int refcount; ++ int tx_free; ++ ++ struct net_device dummy_dev; ++ struct net_device *devs[XRX200_MAX_DEV]; ++ ++ struct tasklet_struct tasklet; ++ struct napi_struct napi; ++ struct ltq_dma_channel dma; ++ struct sk_buff *skb[LTQ_DESC_NUM]; ++ ++ spinlock_t lock; ++}; ++ ++struct xrx200_hw { ++ struct clk *clk; ++ struct mii_bus *mii_bus; ++ ++ struct xrx200_chan chan[XRX200_MAX_DMA]; ++ u16 vlan_vid[XRX200_MAX_VLAN]; ++ u16 vlan_port_map[XRX200_MAX_VLAN]; ++ ++ struct net_device *devs[XRX200_MAX_DEV]; ++ int num_devs; ++ ++ int port_map[XRX200_MAX_PORT]; ++ unsigned short wan_map; ++ ++ struct switch_dev swdev; ++}; ++ ++struct xrx200_priv { ++ struct net_device_stats stats; ++ int id; ++ ++ struct xrx200_port port[XRX200_MAX_PORT]; ++ int num_port; ++ bool wan; ++ bool sw; ++ unsigned short port_map; ++ unsigned char mac[6]; ++ ++ struct xrx200_hw *hw; ++}; ++ ++static __iomem void *xrx200_switch_membase; ++static __iomem void *xrx200_mii_membase; ++static __iomem void *xrx200_mdio_membase; ++static __iomem void *xrx200_pmac_membase; ++ ++#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x)) ++#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y)) ++#define ltq_switch_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_switch_membase + (z)) ++ ++#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x)) ++#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y)) ++#define ltq_mdio_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_mdio_membase + (z)) ++ ++#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x)) ++#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y)) ++#define ltq_mii_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_mii_membase + (z)) ++ ++#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x)) ++#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y)) ++#define ltq_pmac_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, xrx200_pmac_membase + (z)) ++ ++#define XRX200_GLOBAL_REGATTR(reg) \ ++ .id = reg, \ ++ .type = SWITCH_TYPE_INT, \ ++ .set = xrx200_set_global_attr, \ ++ .get = xrx200_get_global_attr ++ ++#define XRX200_PORT_REGATTR(reg) \ ++ .id = reg, \ ++ .type = SWITCH_TYPE_INT, \ ++ .set = xrx200_set_port_attr, \ ++ .get = xrx200_get_port_attr ++ ++static int xrx200sw_read_x(int reg, int x) ++{ ++ int value, mask, addr; ++ ++ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); ++ value = ltq_switch_r32(addr); ++ mask = (1 << xrx200sw_reg[reg].size) - 1; ++ value = (value >> xrx200sw_reg[reg].shift); ++ ++ return (value & mask); ++} ++ ++static int xrx200sw_read(int reg) ++{ ++ return xrx200sw_read_x(reg, 0); ++} ++ ++static void xrx200sw_write_x(int value, int reg, int x) ++{ ++ int mask, addr; ++ ++ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x); ++ mask = (1 << xrx200sw_reg[reg].size) - 1; ++ mask = (mask << xrx200sw_reg[reg].shift); ++ value = (value << xrx200sw_reg[reg].shift) & mask; ++ ++ ltq_switch_w32_mask(mask, value, addr); ++} ++ ++static void xrx200sw_write(int value, int reg) ++{ ++ xrx200sw_write_x(value, reg, 0); ++} ++ ++struct xrx200_pce_table_entry { ++ int index; // PCE_TBL_ADDR.ADDR = pData->table_index ++ int table; // PCE_TBL_CTRL.ADDR = pData->table ++ unsigned short key[8]; ++ unsigned short val[5]; ++ unsigned short mask; ++ unsigned short type; ++ unsigned short valid; ++ unsigned short gmap; ++}; ++ ++static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl) ++{ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ // prepare the table access: ++ // PCE_TBL_ADDR.ADDR = pData->table_index ++ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); ++ // PCE_TBL_CTRL.ADDR = pData->table ++ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); ++ ++ //(address-based read) ++ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD ++ ++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access ++ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ // read the keys ++ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7); ++ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6); ++ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5); ++ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4); ++ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3); ++ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2); ++ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1); ++ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0); ++ ++ // read the values ++ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4); ++ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3); ++ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2); ++ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1); ++ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0); ++ ++ // read the mask ++ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0); ++ // read the type ++ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE); ++ // read the valid flag ++ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD); ++ // read the group map ++ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP); ++ ++ return 0; ++} ++ ++static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl) ++{ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ // prepare the table access: ++ // PCE_TBL_ADDR.ADDR = pData->table_index ++ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR); ++ // PCE_TBL_CTRL.ADDR = pData->table ++ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR); ++ ++ //(address-based write) ++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD ++ ++ // read the keys ++ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7); ++ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6); ++ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5); ++ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4); ++ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3); ++ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2); ++ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1); ++ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0); ++ ++ // read the values ++ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4); ++ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3); ++ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2); ++ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1); ++ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0); ++ ++ // read the mask ++ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0); ++ // read the type ++ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE); ++ // read the valid flag ++ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD); ++ // read the group map ++ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP); ++ ++ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access ++ ++ // wait until hardware is ready ++ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {}; ++ ++ return 0; ++} ++ ++static void xrx200sw_fixup_pvids(void) ++{ ++ int index, p, portmap, untagged; ++ struct xrx200_pce_table_entry tem; ++ struct xrx200_pce_table_entry tev; ++ ++ portmap = 0; ++ for (p = 0; p < XRX200_MAX_PORT; p++) ++ portmap |= BIT(p); ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ ++ for (index = XRX200_MAX_VLAN; index-- > 0;) ++ { ++ tev.index = index; ++ xrx200_pce_table_entry_read(&tev); ++ ++ if (tev.valid == 0) ++ continue; ++ ++ tem.index = index; ++ xrx200_pce_table_entry_read(&tem); ++ ++ if (tem.val[0] == 0) ++ continue; ++ ++ untagged = portmap & (tem.val[1] ^ tem.val[2]); ++ ++ for (p = 0; p < XRX200_MAX_PORT; p++) ++ if (untagged & BIT(p)) ++ { ++ portmap &= ~BIT(p); ++ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); ++ } ++ ++ for (p = 0; p < XRX200_MAX_PORT; p++) ++ if (portmap & BIT(p)) ++ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p); ++ } ++} ++ ++// swconfig interface ++static void xrx200_hw_init(struct xrx200_hw *hw); ++ ++// global ++static int xrx200sw_reset_switch(struct switch_dev *dev) ++{ ++ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); ++ ++ xrx200_hw_init(hw); ++ ++ return 0; ++} ++ ++static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ int p; ++ ++ if ((attr->max > 0) && (val->value.i > attr->max)) ++ return -EINVAL; ++ ++ for (p = 0; p < XRX200_MAX_PORT; p++) { ++ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p); ++ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p); ++ } ++ ++ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN); ++ return 0; ++} ++ ++static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ val->value.i = xrx200sw_read(attr->id); ++ return 0; ++} ++ ++static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ if ((attr->max > 0) && (val->value.i > attr->max)) ++ return -EINVAL; ++ ++ xrx200sw_write(val->value.i, attr->id); ++ return 0; ++} ++ ++static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ val->value.i = xrx200sw_read(attr->id); ++ return 0; ++} ++ ++// vlan ++static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); ++ int i; ++ struct xrx200_pce_table_entry tev; ++ struct xrx200_pce_table_entry tem; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ ++ for (i = 0; i < XRX200_MAX_VLAN; i++) ++ { ++ tev.index = i; ++ xrx200_pce_table_entry_read(&tev); ++ if (tev.key[0] == val->value.i && i != val->port_vlan) ++ return -EINVAL; ++ } ++ ++ hw->vlan_vid[val->port_vlan] = val->value.i; ++ ++ tev.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tev); ++ tev.key[0] = val->value.i; ++ tev.valid = val->value.i > 0; ++ xrx200_pce_table_entry_write(&tev); ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ tem.val[0] = val->value.i; ++ xrx200_pce_table_entry_write(&tem); ++ ++ xrx200sw_fixup_pvids(); ++ return 0; ++} ++ ++static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct xrx200_pce_table_entry te; ++ ++ te.table = XRX200_PCE_ACTVLAN_IDX; ++ te.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&te); ++ val->value.i = te.key[0]; ++ ++ return 0; ++} ++ ++static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev); ++ int i, portmap, tagmap, untagged; ++ struct xrx200_pce_table_entry tem; ++ ++ portmap = 0; ++ tagmap = 0; ++ for (i = 0; i < val->len; i++) ++ { ++ struct switch_port *p = &val->value.ports[i]; ++ ++ portmap |= (1 << p->id); ++ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) ++ tagmap |= (1 << p->id); ++ } ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ ++ untagged = portmap ^ tagmap; ++ for (i = 0; i < XRX200_MAX_VLAN; i++) ++ { ++ tem.index = i; ++ xrx200_pce_table_entry_read(&tem); ++ ++ if (tem.val[0] == 0) ++ continue; ++ ++ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i)) ++ return -EINVAL; ++ } ++ ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ ++ // auto-enable this vlan if not enabled already ++ if (tem.val[0] == 0) ++ { ++ struct switch_val v; ++ v.port_vlan = val->port_vlan; ++ v.value.i = val->port_vlan; ++ if(xrx200sw_set_vlan_vid(dev, NULL, &v)) ++ return -EINVAL; ++ ++ //read updated tem ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ } ++ ++ tem.val[1] = portmap; ++ tem.val[2] = tagmap; ++ xrx200_pce_table_entry_write(&tem); ++ ++ ltq_switch_w32_mask(0, portmap, PCE_PMAP2); ++ ltq_switch_w32_mask(0, portmap, PCE_PMAP3); ++ hw->vlan_port_map[val->port_vlan] = portmap; ++ ++ xrx200sw_fixup_pvids(); ++ ++ return 0; ++} ++ ++static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ int i; ++ unsigned short ports, tags; ++ struct xrx200_pce_table_entry tem; ++ ++ tem.table = XRX200_PCE_VLANMAP_IDX; ++ tem.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tem); ++ ++ ports = tem.val[1]; ++ tags = tem.val[2]; ++ ++ for (i = 0; i < XRX200_MAX_PORT; i++) { ++ struct switch_port *p; ++ ++ if (!(ports & (1 << i))) ++ continue; ++ ++ p = &val->value.ports[val->len++]; ++ p->id = i; ++ if (tags & (1 << i)) ++ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); ++ else ++ p->flags = 0; ++ } ++ ++ return 0; ++} ++ ++static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct xrx200_pce_table_entry tev; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ tev.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tev); ++ ++ if (tev.key[0] == 0) ++ return -EINVAL; ++ ++ tev.valid = val->value.i; ++ xrx200_pce_table_entry_write(&tev); ++ ++ xrx200sw_fixup_pvids(); ++ return 0; ++} ++ ++static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct xrx200_pce_table_entry tev; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ tev.index = val->port_vlan; ++ xrx200_pce_table_entry_read(&tev); ++ val->value.i = tev.valid; ++ ++ return 0; ++} ++ ++// port ++static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val) ++{ ++ struct xrx200_pce_table_entry tev; ++ ++ if (port >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ tev.table = XRX200_PCE_ACTVLAN_IDX; ++ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port); ++ xrx200_pce_table_entry_read(&tev); ++ ++ *val = tev.key[0]; ++ return 0; ++} ++ ++static int xrx200sw_get_port_link(struct switch_dev *dev, ++ int port, ++ struct switch_port_link *link) ++{ ++ if (port >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port); ++ if (!link->link) ++ return 0; ++ ++ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port); ++ ++ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010); ++ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020); ++ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port)); ++ ++ link->speed = SWITCH_PORT_SPEED_10; ++ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port)) ++ link->speed = SWITCH_PORT_SPEED_100; ++ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port)) ++ link->speed = SWITCH_PORT_SPEED_1000; ++ ++ return 0; ++} ++ ++static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ if (val->port_vlan >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ if ((attr->max > 0) && (val->value.i > attr->max)) ++ return -EINVAL; ++ ++ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan); ++ return 0; ++} ++ ++static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val) ++{ ++ if (val->port_vlan >= XRX200_MAX_PORT) ++ return -EINVAL; ++ ++ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan); ++ return 0; ++} ++ ++// attributes ++static struct switch_attr xrx200sw_globals[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .set = xrx200_set_vlan_mode_enable, ++ .get = xrx200_get_vlan_mode_enable, ++ .name = "enable_vlan", ++ .description = "Enable VLAN mode", ++ .max = 1}, ++}; ++ ++static struct switch_attr xrx200sw_port[] = { ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR), ++ .name = "uvr", ++ .description = "Unknown VLAN Rule", ++ .max = 1, ++ }, ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR), ++ .name = "vsr", ++ .description = "VLAN Security Rule", ++ .max = 1, ++ }, ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR), ++ .name = "vinr", ++ .description = "VLAN Ingress Tag Rule", ++ .max = 2, ++ }, ++ { ++ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM), ++ .name = "tvm", ++ .description = "Transparent VLAN Mode", ++ .max = 1, ++ }, ++}; ++ ++static struct switch_attr xrx200sw_vlan[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "vid", ++ .description = "VLAN ID (0-4094)", ++ .set = xrx200sw_set_vlan_vid, ++ .get = xrx200sw_get_vlan_vid, ++ .max = 4094, ++ }, ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "enable", ++ .description = "Enable VLAN", ++ .set = xrx200sw_set_vlan_enable, ++ .get = xrx200sw_get_vlan_enable, ++ .max = 1, ++ }, ++}; ++ ++static const struct switch_dev_ops xrx200sw_ops = { ++ .attr_global = { ++ .attr = xrx200sw_globals, ++ .n_attr = ARRAY_SIZE(xrx200sw_globals), ++ }, ++ .attr_port = { ++ .attr = xrx200sw_port, ++ .n_attr = ARRAY_SIZE(xrx200sw_port), ++ }, ++ .attr_vlan = { ++ .attr = xrx200sw_vlan, ++ .n_attr = ARRAY_SIZE(xrx200sw_vlan), ++ }, ++ .get_vlan_ports = xrx200sw_get_vlan_ports, ++ .set_vlan_ports = xrx200sw_set_vlan_ports, ++ .get_port_pvid = xrx200sw_get_port_pvid, ++ .reset_switch = xrx200sw_reset_switch, ++ .get_port_link = xrx200sw_get_port_link, ++// .get_port_stats = xrx200sw_get_port_stats, //TODO ++}; ++ ++static int xrx200sw_init(struct xrx200_hw *hw) ++{ ++ int netdev_num; ++ ++ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++) ++ { ++ struct switch_dev *swdev; ++ struct net_device *dev = hw->devs[netdev_num]; ++ struct xrx200_priv *priv = netdev_priv(dev); ++ if (!priv->sw) ++ continue; ++ ++ swdev = &hw->swdev; ++ ++ swdev->name = "Lantiq XRX200 Switch"; ++ swdev->vlans = XRX200_MAX_VLAN; ++ swdev->ports = XRX200_MAX_PORT; ++ swdev->cpu_port = 6; ++ swdev->ops = &xrx200sw_ops; ++ ++ register_switch(swdev, dev); ++ return 0; // enough switches ++ } ++ return 0; ++} ++ ++static int xrx200_open(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ int i; ++ ++ for (i = 0; i < XRX200_MAX_DMA; i++) { ++ if (!priv->hw->chan[i].dma.irq) ++ continue; ++ spin_lock_bh(&priv->hw->chan[i].lock); ++ if (!priv->hw->chan[i].refcount) { ++ if (XRX200_DMA_IS_RX(i)) ++ napi_enable(&priv->hw->chan[i].napi); ++ ltq_dma_open(&priv->hw->chan[i].dma); ++ } ++ priv->hw->chan[i].refcount++; ++ spin_unlock_bh(&priv->hw->chan[i].lock); ++ } ++ for (i = 0; i < priv->num_port; i++) ++ if (priv->port[i].phydev) ++ phy_start(priv->port[i].phydev); ++ netif_wake_queue(dev); ++ ++ return 0; ++} ++ ++static int xrx200_close(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ int i; ++ ++ netif_stop_queue(dev); ++ ++ for (i = 0; i < priv->num_port; i++) ++ if (priv->port[i].phydev) ++ phy_stop(priv->port[i].phydev); ++ ++ for (i = 0; i < XRX200_MAX_DMA; i++) { ++ if (!priv->hw->chan[i].dma.irq) ++ continue; ++ ++ priv->hw->chan[i].refcount--; ++ if (!priv->hw->chan[i].refcount) { ++ if (XRX200_DMA_IS_RX(i)) ++ napi_disable(&priv->hw->chan[i].napi); ++ spin_lock_bh(&priv->hw->chan[i].lock); ++ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma); ++ spin_unlock_bh(&priv->hw->chan[i].lock); ++ } ++ } ++ ++ return 0; ++} ++ ++static int xrx200_alloc_skb(struct xrx200_chan *ch) ++{ ++#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD) ++ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD); ++ if (!ch->skb[ch->dma.desc]) ++ goto skip; ++ ++ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD); ++ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, ++ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN, ++ DMA_FROM_DEVICE); ++ ch->dma.desc_base[ch->dma.desc].addr = ++ CPHYSADDR(ch->skb[ch->dma.desc]->data); ++ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN); ++ ++skip: ++ ch->dma.desc_base[ch->dma.desc].ctl = ++ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | ++ XRX200_DMA_DATA_LEN; ++ ++ return 0; ++} ++ ++static void xrx200_hw_receive(struct xrx200_chan *ch, int id) ++{ ++ struct net_device *dev = ch->devs[id]; ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; ++ struct sk_buff *skb = ch->skb[ch->dma.desc]; ++ int len = (desc->ctl & LTQ_DMA_SIZE_MASK); ++ int ret; ++ ++ ret = xrx200_alloc_skb(ch); ++ ++ ch->dma.desc++; ++ ch->dma.desc %= LTQ_DESC_NUM; ++ ++ if (ret) { ++ netdev_err(dev, ++ "failed to allocate new rx buffer\n"); ++ return; ++ } ++ ++ skb_put(skb, len); ++#ifdef SW_ROUTING ++ skb_pull(skb, 8); ++#endif ++ skb->dev = dev; ++ skb->protocol = eth_type_trans(skb, dev); ++ netif_receive_skb(skb); ++ priv->stats.rx_packets++; ++ priv->stats.rx_bytes+=len; ++} ++ ++static int xrx200_poll_rx(struct napi_struct *napi, int budget) ++{ ++ struct xrx200_chan *ch = container_of(napi, ++ struct xrx200_chan, napi); ++ struct xrx200_priv *priv = netdev_priv(ch->devs[0]); ++ int rx = 0; ++ int complete = 0; ++ ++ while ((rx < budget) && !complete) { ++ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; ++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { ++#ifdef SW_ROUTING ++ struct sk_buff *skb = ch->skb[ch->dma.desc]; ++ u8 *special_tag = (u8*)skb->data; ++ int port = (special_tag[7] >> SPPID_SHIFT) & SPPID_MASK; ++ xrx200_hw_receive(ch, priv->hw->port_map[port]); ++#else ++ xrx200_hw_receive(ch, 0); ++#endif ++ rx++; ++ } else { ++ complete = 1; ++ } ++ } ++ ++ if (complete || !rx) { ++ napi_complete(&ch->napi); ++ ltq_dma_enable_irq(&ch->dma); ++ } ++ ++ return rx; ++} ++ ++static void xrx200_tx_housekeeping(unsigned long ptr) ++{ ++ struct xrx200_chan *ch = (struct xrx200_chan *) ptr; ++ int pkts = 0; ++ int i; ++ ++ spin_lock_bh(&ch->lock); ++ ltq_dma_ack_irq(&ch->dma); ++ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { ++ struct sk_buff *skb = ch->skb[ch->tx_free]; ++ ++ pkts++; ++ ch->skb[ch->tx_free] = NULL; ++ dev_kfree_skb(skb); ++ memset(&ch->dma.desc_base[ch->tx_free], 0, ++ sizeof(struct ltq_dma_desc)); ++ ch->tx_free++; ++ ch->tx_free %= LTQ_DESC_NUM; ++ } ++ ltq_dma_enable_irq(&ch->dma); ++ spin_unlock_bh(&ch->lock); ++ ++ if (!pkts) ++ return; ++ ++ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++) ++ netif_wake_queue(ch->devs[i]); ++} ++ ++static struct net_device_stats *xrx200_get_stats (struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ ++ return &priv->stats; ++} ++ ++static void xrx200_tx_timeout(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ ++ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name); ++ ++ priv->stats.tx_errors++; ++ netif_wake_queue(dev); ++} ++ ++static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct xrx200_chan *ch; ++ struct ltq_dma_desc *desc; ++ u32 byte_offset; ++ int ret = NETDEV_TX_OK; ++ int len; ++#ifdef SW_ROUTING ++ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE; ++#endif ++ if(priv->id) ++ ch = &priv->hw->chan[XRX200_DMA_TX_2]; ++ else ++ ch = &priv->hw->chan[XRX200_DMA_TX]; ++ ++ desc = &ch->dma.desc_base[ch->dma.desc]; ++ ++ skb->dev = dev; ++ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; ++ ++#ifdef SW_ROUTING ++ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) { ++ u16 port_map = priv->port_map; ++ ++ if (priv->sw && skb->protocol == htons(ETH_P_8021Q)) { ++ u16 vid; ++ int i; ++ ++ port_map = 0; ++ if (!__vlan_get_tag(skb, &vid)) { ++ for (i = 0; i < XRX200_MAX_VLAN; i++) { ++ if (priv->hw->vlan_vid[i] != vid) ++ continue; ++ port_map = priv->hw->vlan_port_map[i]; ++ break; ++ } ++ } ++ } ++ ++ special_tag |= (port_map << PORT_MAP_SHIFT) | ++ PORT_MAP_SEL | PORT_MAP_EN; ++ } ++ if(priv->wan) ++ special_tag |= (1 << DPID_SHIFT); ++ if(skb_headroom(skb) < 4) { ++ struct sk_buff *tmp = skb_realloc_headroom(skb, 4); ++ dev_kfree_skb_any(skb); ++ skb = tmp; ++ } ++ skb_push(skb, 4); ++ memcpy(skb->data, &special_tag, sizeof(u32)); ++ len += 4; ++#endif ++ ++ /* dma needs to start on a 16 byte aligned address */ ++ byte_offset = CPHYSADDR(skb->data) % 16; ++ ++ spin_lock_bh(&ch->lock); ++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { ++ netdev_err(dev, "tx ring full\n"); ++ netif_stop_queue(dev); ++ ret = NETDEV_TX_BUSY; ++ goto out; ++ } ++ ++ ch->skb[ch->dma.desc] = skb; ++ ++ netif_trans_update(dev); ++ ++ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len, ++ DMA_TO_DEVICE)) - byte_offset; ++ wmb(); ++ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | ++ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); ++ ch->dma.desc++; ++ ch->dma.desc %= LTQ_DESC_NUM; ++ if (ch->dma.desc == ch->tx_free) ++ netif_stop_queue(dev); ++ ++ ++ priv->stats.tx_packets++; ++ priv->stats.tx_bytes+=len; ++ ++out: ++ spin_unlock_bh(&ch->lock); ++ ++ return ret; ++} ++ ++static irqreturn_t xrx200_dma_irq(int irq, void *priv) ++{ ++ struct xrx200_hw *hw = priv; ++ int chnr = irq - XRX200_DMA_IRQ; ++ struct xrx200_chan *ch = &hw->chan[chnr]; ++ ++ ltq_dma_disable_irq(&ch->dma); ++ ltq_dma_ack_irq(&ch->dma); ++ ++ if (chnr % 2) ++ tasklet_schedule(&ch->tasklet); ++ else ++ napi_schedule(&ch->napi); ++ ++ return IRQ_HANDLED; ++} ++ ++static int xrx200_dma_init(struct xrx200_hw *hw) ++{ ++ int i, err = 0; ++ ++ ltq_dma_init_port(DMA_PORT_ETOP); ++ ++ for (i = 0; i < 8 && !err; i++) { ++ int irq = XRX200_DMA_IRQ + i; ++ struct xrx200_chan *ch = &hw->chan[i]; ++ ++ spin_lock_init(&ch->lock); ++ ++ ch->idx = ch->dma.nr = i; ++ ++ if (i == XRX200_DMA_TX) { ++ ltq_dma_alloc_tx(&ch->dma); ++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw); ++ } else if (i == XRX200_DMA_TX_2) { ++ ltq_dma_alloc_tx(&ch->dma); ++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx_2", hw); ++ } else if (i == XRX200_DMA_RX) { ++ ltq_dma_alloc_rx(&ch->dma); ++ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; ++ ch->dma.desc++) ++ if (xrx200_alloc_skb(ch)) ++ err = -ENOMEM; ++ ch->dma.desc = 0; ++ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw); ++ } else ++ continue; ++ ++ if (!err) ++ ch->dma.irq = irq; ++ else ++ pr_err("net-xrx200: failed to request irq %d\n", irq); ++ } ++ ++ return err; ++} ++ ++#ifdef SW_POLLING ++static void xrx200_gmac_update(struct xrx200_port *port) ++{ ++ u16 phyaddr = port->phydev->mdio.addr & MDIO_PHY_ADDR_MASK; ++ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK; ++ u16 miirate = 0; ++ ++ switch (port->phydev->speed) { ++ case SPEED_1000: ++ phyaddr |= MDIO_PHY_SPEED_G1; ++ miirate = MII_CFG_RATE_M125; ++ break; ++ ++ case SPEED_100: ++ phyaddr |= MDIO_PHY_SPEED_M100; ++ switch (miimode) { ++ case MII_CFG_MODE_RMIIM: ++ case MII_CFG_MODE_RMIIP: ++ miirate = MII_CFG_RATE_M50; ++ break; ++ default: ++ miirate = MII_CFG_RATE_M25; ++ break; ++ } ++ break; ++ ++ default: ++ phyaddr |= MDIO_PHY_SPEED_M10; ++ miirate = MII_CFG_RATE_M2P5; ++ break; ++ } ++ ++ if (port->phydev->link) ++ phyaddr |= MDIO_PHY_LINK_UP; ++ else ++ phyaddr |= MDIO_PHY_LINK_DOWN; ++ ++ if (port->phydev->duplex == DUPLEX_FULL) ++ phyaddr |= MDIO_PHY_FDUP_EN; ++ else ++ phyaddr |= MDIO_PHY_FDUP_DIS; ++ ++ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num)); ++ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num)); ++ udelay(1); ++} ++#else ++static void xrx200_gmac_update(struct xrx200_port *port) ++{ ++ ++} ++#endif ++ ++static void xrx200_mdio_link(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ bool link = false; ++ int i; ++ ++ for (i = 0; i < priv->num_port; i++) { ++ if (!priv->port[i].phydev) ++ continue; ++ ++ if (priv->port[i].phydev->link) ++ link = true; ++ ++ if (priv->port[i].link != priv->port[i].phydev->link) { ++ xrx200_gmac_update(&priv->port[i]); ++ priv->port[i].link = priv->port[i].phydev->link; ++ netdev_info(dev, "port %d %s link\n", ++ priv->port[i].num, ++ (priv->port[i].link)?("got"):("lost")); ++ } ++ } ++ if (netif_carrier_ok(dev) && !link) ++ netif_carrier_off(dev); ++} ++ ++static inline int xrx200_mdio_poll(struct mii_bus *bus) ++{ ++ unsigned cnt = 10000; ++ ++ while (likely(cnt--)) { ++ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL); ++ if ((ctrl & MDIO_BUSY) == 0) ++ return 0; ++ } ++ ++ return 1; ++} ++ ++static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) ++{ ++ if (xrx200_mdio_poll(bus)) ++ return 1; ++ ++ ltq_mdio_w32(val, MDIO_WRITE); ++ ltq_mdio_w32(MDIO_BUSY | MDIO_WR | ++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | ++ (reg & MDIO_MASK), ++ MDIO_CTRL); ++ ++ return 0; ++} ++ ++static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg) ++{ ++ if (xrx200_mdio_poll(bus)) ++ return -1; ++ ++ ltq_mdio_w32(MDIO_BUSY | MDIO_RD | ++ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) | ++ (reg & MDIO_MASK), ++ MDIO_CTRL); ++ ++ if (xrx200_mdio_poll(bus)) ++ return -1; ++ ++ return ltq_mdio_r32(MDIO_READ); ++} ++ ++static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct phy_device *phydev = NULL; ++ unsigned val; ++ ++ phydev = mdiobus_get_phy(priv->hw->mii_bus, port->phy_addr); ++ ++ if (!phydev) { ++ netdev_err(dev, "no PHY found\n"); ++ return -ENODEV; ++ } ++ ++ phydev = phy_connect(dev, phydev_name(phydev), &xrx200_mdio_link, ++ port->phy_if); ++ ++ if (IS_ERR(phydev)) { ++ netdev_err(dev, "Could not attach to PHY\n"); ++ return PTR_ERR(phydev); ++ } ++ ++ phydev->supported &= (SUPPORTED_10baseT_Half ++ | SUPPORTED_10baseT_Full ++ | SUPPORTED_100baseT_Half ++ | SUPPORTED_100baseT_Full ++ | SUPPORTED_1000baseT_Half ++ | SUPPORTED_1000baseT_Full ++ | SUPPORTED_Autoneg ++ | SUPPORTED_MII ++ | SUPPORTED_TP); ++ phydev->advertising = phydev->supported; ++ port->phydev = phydev; ++ phydev->no_auto_carrier_off = true; ++ ++ phy_attached_info(phydev); ++ ++#ifdef SW_POLLING ++ phy_read_status(phydev); ++ ++ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000); ++ val |= ADVERTIZE_MPD; ++ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val); ++ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040); ++ ++ phy_start_aneg(phydev); ++#endif ++ return 0; ++} ++ ++static void xrx200_port_config(struct xrx200_priv *priv, ++ const struct xrx200_port *port) ++{ ++ u16 miimode = 0; ++ ++ switch (port->num) { ++ case 0: /* xMII0 */ ++ case 1: /* xMII1 */ ++ switch (port->phy_if) { ++ case PHY_INTERFACE_MODE_MII: ++ if (port->flags & XRX200_PORT_TYPE_PHY) ++ /* MII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_MIIM; ++ else ++ /* MII PHY mode, connected to external MAC */ ++ miimode = MII_CFG_MODE_MIIP; ++ break; ++ case PHY_INTERFACE_MODE_RMII: ++ if (port->flags & XRX200_PORT_TYPE_PHY) ++ /* RMII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_RMIIM; ++ else ++ /* RMII PHY mode, connected to external MAC */ ++ miimode = MII_CFG_MODE_RMIIP; ++ break; ++ case PHY_INTERFACE_MODE_RGMII: ++ /* RGMII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_RGMII; ++ break; ++ default: ++ break; ++ } ++ break; ++ case 2: /* internal GPHY0 */ ++ case 3: /* internal GPHY0 */ ++ case 4: /* internal GPHY1 */ ++ switch (port->phy_if) { ++ case PHY_INTERFACE_MODE_MII: ++ case PHY_INTERFACE_MODE_GMII: ++ /* MII MAC mode, connected to internal GPHY */ ++ miimode = MII_CFG_MODE_MIIM; ++ break; ++ default: ++ break; ++ } ++ break; ++ case 5: /* internal GPHY1 or xMII2 */ ++ switch (port->phy_if) { ++ case PHY_INTERFACE_MODE_MII: ++ /* MII MAC mode, connected to internal GPHY */ ++ miimode = MII_CFG_MODE_MIIM; ++ break; ++ case PHY_INTERFACE_MODE_RGMII: ++ /* RGMII MAC mode, connected to external PHY */ ++ miimode = MII_CFG_MODE_RGMII; ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ ++ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN, ++ MII_CFG(port->num)); ++} ++ ++static int xrx200_init(struct net_device *dev) ++{ ++ struct xrx200_priv *priv = netdev_priv(dev); ++ struct sockaddr mac; ++ int err, i; ++ ++#ifndef SW_POLLING ++ unsigned int reg = 0; ++ ++ /* enable auto polling */ ++ for (i = 0; i < priv->num_port; i++) ++ reg |= BIT(priv->port[i].num); ++ ltq_mdio_w32(reg, MDIO_CLK_CFG0); ++ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1); ++#endif ++ ++ /* setup each port */ ++ for (i = 0; i < priv->num_port; i++) ++ xrx200_port_config(priv, &priv->port[i]); ++ ++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); ++ if (!is_valid_ether_addr(mac.sa_data)) { ++ pr_warn("net-xrx200: invalid MAC, using random\n"); ++ eth_random_addr(mac.sa_data); ++ dev->addr_assign_type |= NET_ADDR_RANDOM; ++ } ++ ++ err = eth_mac_addr(dev, &mac); ++ if (err) ++ goto err_netdev; ++ ++ for (i = 0; i < priv->num_port; i++) ++ if (xrx200_mdio_probe(dev, &priv->port[i])) ++ pr_warn("xrx200-mdio: probing phy of port %d failed\n", ++ priv->port[i].num); ++ ++ return 0; ++ ++err_netdev: ++ unregister_netdev(dev); ++ free_netdev(dev); ++ return err; ++} ++ ++static void xrx200_pci_microcode(void) ++{ ++ int i; ++ ++ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK, ++ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL); ++ ltq_switch_w32(0, PCE_TBL_MASK); ++ ++ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) { ++ ltq_switch_w32(i, PCE_TBL_ADDR); ++ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0)); ++ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1)); ++ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2)); ++ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3)); ++ ++ // start the table access: ++ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL); ++ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY); ++ } ++ ++ /* tell the switch that the microcode is loaded */ ++ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0)); ++} ++ ++static void xrx200_hw_init(struct xrx200_hw *hw) ++{ ++ int i; ++ ++ /* enable clock gate */ ++ clk_enable(hw->clk); ++ ++ ltq_switch_w32(1, 0); ++ mdelay(100); ++ ltq_switch_w32(0, 0); ++ /* ++ * TODO: we should really disbale all phys/miis here and explicitly ++ * enable them in the device secific init function ++ */ ++ ++ /* disable port fetch/store dma */ ++ for (i = 0; i < 7; i++ ) { ++ ltq_switch_w32(0, FDMA_PCTRLx(i)); ++ ltq_switch_w32(0, SDMA_PCTRLx(i)); ++ } ++ ++ /* enable Switch */ ++ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB); ++ ++ /* load the pce microcode */ ++ xrx200_pci_microcode(); ++ ++ /* Default unknown Broadcat/Multicast/Unicast port maps */ ++ ltq_switch_w32(0x40, PCE_PMAP1); ++ ltq_switch_w32(0x40, PCE_PMAP2); ++ ltq_switch_w32(0x40, PCE_PMAP3); ++ ++ /* RMON Counter Enable for all physical ports */ ++ for (i = 0; i < 7; i++) ++ ltq_switch_w32(0x1, BM_PCFG(i)); ++ ++ /* disable auto polling */ ++ ltq_mdio_w32(0x0, MDIO_CLK_CFG0); ++ ++ /* enable port statistic counters */ ++ for (i = 0; i < 7; i++) ++ ltq_switch_w32(0x1, BM_PCFGx(i)); ++ ++ /* set IPG to 12 */ ++ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG); ++ ++#ifdef SW_ROUTING ++ /* enable status header, enable CRC */ ++ ltq_pmac_w32_mask(0, ++ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, ++ PMAC_HD_CTL); ++#else ++ /* disable status header, enable CRC */ ++ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS, ++ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC, ++ PMAC_HD_CTL); ++#endif ++ ++ /* enable port fetch/store dma & VLAN Modification */ ++ for (i = 0; i < 7; i++ ) { ++ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i)); ++ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i)); ++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0)); ++ } ++ ++ /* enable special tag insertion on cpu port */ ++ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6)); ++ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0)); ++ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2)); ++ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG); ++ xrx200sw_write_x(1, XRX200_BM_QUEUE_GCTRL_GL_MOD, 0); ++ ++ for (i = 0; i < XRX200_MAX_VLAN; i++) ++ hw->vlan_vid[i] = i; ++} ++ ++static void xrx200_hw_cleanup(struct xrx200_hw *hw) ++{ ++ int i; ++ ++ /* disable the switch */ ++ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB); ++ ++ /* free the channels and IRQs */ ++ for (i = 0; i < 2; i++) { ++ ltq_dma_free(&hw->chan[i].dma); ++ if (hw->chan[i].dma.irq) ++ free_irq(hw->chan[i].dma.irq, hw); ++ } ++ ++ /* free the allocated RX ring */ ++ for (i = 0; i < LTQ_DESC_NUM; i++) ++ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]); ++ ++ /* clear the mdio bus */ ++ mdiobus_unregister(hw->mii_bus); ++ mdiobus_free(hw->mii_bus); ++ ++ /* release the clock */ ++ clk_disable(hw->clk); ++ clk_put(hw->clk); ++} ++ ++static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np) ++{ ++ hw->mii_bus = mdiobus_alloc(); ++ if (!hw->mii_bus) ++ return -ENOMEM; ++ ++ hw->mii_bus->read = xrx200_mdio_rd; ++ hw->mii_bus->write = xrx200_mdio_wr; ++ hw->mii_bus->name = "lantiq,xrx200-mdio"; ++ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0); ++ ++ if (of_mdiobus_register(hw->mii_bus, np)) { ++ mdiobus_free(hw->mii_bus); ++ return -ENXIO; ++ } ++ ++ return 0; ++} ++ ++static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port) ++{ ++ const __be32 *addr, *id = of_get_property(port, "reg", NULL); ++ struct xrx200_port *p = &priv->port[priv->num_port]; ++ ++ if (!id) ++ return; ++ ++ memset(p, 0, sizeof(struct xrx200_port)); ++ p->phy_node = of_parse_phandle(port, "phy-handle", 0); ++ addr = of_get_property(p->phy_node, "reg", NULL); ++ if (!addr) ++ return; ++ ++ p->num = *id; ++ p->phy_addr = *addr; ++ p->phy_if = of_get_phy_mode(port); ++ if (p->phy_addr > 0x10) ++ p->flags = XRX200_PORT_TYPE_MAC; ++ else ++ p->flags = XRX200_PORT_TYPE_PHY; ++ priv->num_port++; ++ ++ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags); ++ if (gpio_is_valid(p->gpio)) ++ if (!gpio_request(p->gpio, "phy-reset")) { ++ gpio_direction_output(p->gpio, ++ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0)); ++ udelay(100); ++ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); ++ } ++ /* is this port a wan port ? */ ++ if (priv->wan) ++ priv->hw->wan_map |= BIT(p->num); ++ ++ priv->port_map |= BIT(p->num); ++ ++ /* store the port id in the hw struct so we can map ports -> devices */ ++ priv->hw->port_map[p->num] = priv->hw->num_devs; ++} ++ ++static const struct net_device_ops xrx200_netdev_ops = { ++ .ndo_init = xrx200_init, ++ .ndo_open = xrx200_open, ++ .ndo_stop = xrx200_close, ++ .ndo_start_xmit = xrx200_start_xmit, ++ .ndo_set_mac_address = eth_mac_addr, ++ .ndo_validate_addr = eth_validate_addr, ++ .ndo_change_mtu = eth_change_mtu, ++ .ndo_get_stats = xrx200_get_stats, ++ .ndo_tx_timeout = xrx200_tx_timeout, ++}; ++ ++static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface, struct device *dev) ++{ ++ struct xrx200_priv *priv; ++ struct device_node *port; ++ const __be32 *wan; ++ const u8 *mac; ++ ++ /* alloc the network device */ ++ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv)); ++ if (!hw->devs[hw->num_devs]) ++ return; ++ ++ /* setup the network device */ ++ strcpy(hw->devs[hw->num_devs]->name, "eth%d"); ++ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops; ++ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT; ++ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM; ++ SET_NETDEV_DEV(hw->devs[hw->num_devs], dev); ++ ++ /* setup our private data */ ++ priv = netdev_priv(hw->devs[hw->num_devs]); ++ priv->hw = hw; ++ priv->id = hw->num_devs; ++ ++ mac = of_get_mac_address(iface); ++ if (mac) ++ memcpy(priv->mac, mac, ETH_ALEN); ++ ++ /* is this the wan interface ? */ ++ wan = of_get_property(iface, "lantiq,wan", NULL); ++ if (wan && (*wan == 1)) ++ priv->wan = 1; ++ ++ /* should the switch be enabled on this interface ? */ ++ if (of_find_property(iface, "lantiq,switch", NULL)) ++ priv->sw = 1; ++ ++ /* load the ports that are part of the interface */ ++ for_each_child_of_node(iface, port) ++ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port")) ++ xrx200_of_port(priv, port); ++ ++ /* register the actual device */ ++ if (!register_netdev(hw->devs[hw->num_devs])) ++ hw->num_devs++; ++} ++ ++static struct xrx200_hw xrx200_hw; ++ ++static int xrx200_probe(struct platform_device *pdev) ++{ ++ struct resource *res[4]; ++ struct device_node *mdio_np, *iface_np; ++ int i; ++ ++ /* load the memory ranges */ ++ for (i = 0; i < 4; i++) { ++ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i); ++ if (!res[i]) { ++ dev_err(&pdev->dev, "failed to get resources\n"); ++ return -ENOENT; ++ } ++ } ++ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]); ++ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]); ++ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]); ++ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]); ++ if (!xrx200_switch_membase || !xrx200_mdio_membase || ++ !xrx200_mii_membase || !xrx200_pmac_membase) { ++ dev_err(&pdev->dev, "failed to request and remap io ranges \n"); ++ return -ENOMEM; ++ } ++ ++ /* get the clock */ ++ xrx200_hw.clk = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(xrx200_hw.clk)) { ++ dev_err(&pdev->dev, "failed to get clock\n"); ++ return PTR_ERR(xrx200_hw.clk); ++ } ++ ++ /* bring up the dma engine and IP core */ ++ xrx200_dma_init(&xrx200_hw); ++ xrx200_hw_init(&xrx200_hw); ++ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX]); ++ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX_2].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX_2]); ++ ++ /* bring up the mdio bus */ ++ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL, ++ "lantiq,xrx200-mdio"); ++ if (mdio_np) ++ if (xrx200_of_mdio(&xrx200_hw, mdio_np)) ++ dev_err(&pdev->dev, "mdio probe failed\n"); ++ ++ /* load the interfaces */ ++ for_each_child_of_node(pdev->dev.of_node, iface_np) ++ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) { ++ if (xrx200_hw.num_devs < XRX200_MAX_DEV) ++ xrx200_of_iface(&xrx200_hw, iface_np, &pdev->dev); ++ else ++ dev_err(&pdev->dev, ++ "only %d interfaces allowed\n", ++ XRX200_MAX_DEV); ++ } ++ ++ if (!xrx200_hw.num_devs) { ++ xrx200_hw_cleanup(&xrx200_hw); ++ dev_err(&pdev->dev, "failed to load interfaces\n"); ++ return -ENOENT; ++ } ++ ++ xrx200sw_init(&xrx200_hw); ++ ++ /* set wan port mask */ ++ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN); ++ ++ for (i = 0; i < xrx200_hw.num_devs; i++) { ++ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i]; ++ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i]; ++ xrx200_hw.chan[XRX200_DMA_TX_2].devs[i] = xrx200_hw.devs[i]; ++ } ++ ++ /* setup NAPI */ ++ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev); ++ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev, ++ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32); ++ ++ platform_set_drvdata(pdev, &xrx200_hw); ++ ++ return 0; ++} ++ ++static int xrx200_remove(struct platform_device *pdev) ++{ ++ struct net_device *dev = platform_get_drvdata(pdev); ++ struct xrx200_priv *priv; ++ ++ if (!dev) ++ return 0; ++ ++ priv = netdev_priv(dev); ++ ++ /* free stack related instances */ ++ netif_stop_queue(dev); ++ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi); ++ ++ /* shut down hardware */ ++ xrx200_hw_cleanup(&xrx200_hw); ++ ++ /* remove the actual device */ ++ unregister_netdev(dev); ++ free_netdev(dev); ++ ++ return 0; ++} ++ ++static const struct of_device_id xrx200_match[] = { ++ { .compatible = "lantiq,xrx200-net" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, xrx200_match); ++ ++static struct platform_driver xrx200_driver = { ++ .probe = xrx200_probe, ++ .remove = xrx200_remove, ++ .driver = { ++ .name = "lantiq,xrx200-net", ++ .of_match_table = xrx200_match, ++ .owner = THIS_MODULE, ++ }, ++}; ++ ++module_platform_driver(xrx200_driver); ++ ++MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); ++MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet"); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/net/ethernet/lantiq_xrx200_sw.h +@@ -0,0 +1,1328 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. ++ * ++ * Copyright (C) 2010 Lantiq Deutschland GmbH ++ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com> ++ * ++ * VR9 switch registers extracted from 310TUJ0 switch api ++ * WARNING mult values of 0x00 may not be correct ++ * ++ */ ++ ++enum { ++// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */ ++// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */ ++// XRX200_ETHSW_SWRES_R0, /* Register Configuration */ ++// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */ ++// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */ ++// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */ ++// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */ ++// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */ ++// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */ ++// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */ ++// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */ ++// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */ ++// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */ ++// XRX200_ETHSW_DBG_MODE, /* Debug Mode */ ++// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */ ++// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */ ++// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */ ++// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */ ++// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */ ++// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */ ++// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */ ++// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */ ++// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */ ++// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */ ++// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */ ++// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */ ++// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */ ++// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */ ++// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */ ++// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */ ++// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */ ++// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */ ++// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */ ++// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */ ++// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */ ++// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */ ++// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */ ++// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */ ++// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */ ++// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */ ++// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */ ++// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */ ++// XRX200_ETHSW_CAP_6_APPL, /* Application table size */ ++// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */ ++// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */ ++// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */ ++// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */ ++// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */ ++// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */ ++// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */ ++// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */ ++// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */ ++// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */ ++// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */ ++// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */ ++// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */ ++// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */ ++// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */ ++// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */ ++// XRX200_ETHSW_IER, /* Interrupt Enable Register */ ++// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */ ++// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */ ++// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */ ++// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */ ++// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */ ++// XRX200_ETHSW_ISR, /* Interrupt Status Register */ ++// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */ ++// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */ ++// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */ ++// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */ ++// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */ ++// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */ ++// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */ ++// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */ ++// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */ ++// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */ ++// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */ ++// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */ ++// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */ ++// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */ ++// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */ ++// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */ ++// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */ ++// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */ ++// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */ ++// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */ ++// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */ ++// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */ ++// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */ ++// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */ ++// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */ ++// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */ ++// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */ ++// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */ ++// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */ ++// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */ ++// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */ ++// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */ ++// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */ ++// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */ ++// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */ ++// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */ ++// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */ ++// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */ ++// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */ ++// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */ ++// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */ ++// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */ ++// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */ ++// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */ ++// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */ ++// XRX200_BM_RAM_ADDR, /* RAM Address Register */ ++// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */ ++// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */ ++// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */ ++// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ ++// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */ ++// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */ ++// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */ ++// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */ ++// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */ ++// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */ ++// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */ ++// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */ ++// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */ ++// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */ ++// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */ ++// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */ ++// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */ ++// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */ ++// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */ ++// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */ ++// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */ ++// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */ ++// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */ ++// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */ ++// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */ ++// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */ ++// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */ ++ XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */ ++// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */ ++// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */ ++// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */ ++// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */ ++// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */ ++// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */ ++// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */ ++// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */ ++// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */ ++// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */ ++// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */ ++// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */ ++// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */ ++// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */ ++// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */ ++// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */ ++// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */ ++// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */ ++// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */ ++// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */ ++// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */ ++// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */ ++// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */ ++// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ ++// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */ ++// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ ++// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */ ++// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */ ++// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */ ++// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */ ++// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */ ++// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */ ++// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */ ++// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */ ++// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */ ++// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */ ++// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */ ++// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */ ++// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */ ++// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */ ++// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */ ++// XRX200_BM_CISEL_PORT, /* Port Number */ ++// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */ ++// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */ ++// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */ ++// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */ ++// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */ ++// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */ ++// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */ ++// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */ ++// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */ ++// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */ ++// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */ ++// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */ ++// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */ ++// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */ ++// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */ ++// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */ ++// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */ ++// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */ ++// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */ ++// XRX200_RS_CBS_CBS, /* Committed Burst Size */ ++// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */ ++// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */ ++// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */ ++// XRX200_RS_CIR_EXP_EXP, /* Exponent */ ++// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */ ++// XRX200_RS_CIR_MANT_MANT, /* Mantissa */ ++ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */ ++// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */ ++// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */ ++// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */ ++// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */ ++// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */ ++// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */ ++// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */ ++ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */ ++// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */ ++ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */ ++// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */ ++ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */ ++// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */ ++// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */ ++// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */ ++// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */ ++ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */ ++// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */ ++// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */ ++ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */ ++// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */ ++ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */ ++ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */ ++ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */ ++ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */ ++ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */ ++ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */ ++// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */ ++// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */ ++// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */ ++// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */ ++// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */ ++// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */ ++// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */ ++// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */ ++// XRX200_PCE_PMAP_1, /* Port Map Register 1 */ ++// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */ ++// XRX200_PCE_PMAP_2, /* Port Map Register 2 */ ++// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */ ++// XRX200_PCE_PMAP_3, /* Port Map Register 3 */ ++// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */ ++// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */ ++// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */ ++ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */ ++// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */ ++// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */ ++// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */ ++// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */ ++// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */ ++// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */ ++// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */ ++// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */ ++// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */ ++// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */ ++// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */ ++// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */ ++// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */ ++// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */ ++// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */ ++// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */ ++// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */ ++// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */ ++// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */ ++// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */ ++// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */ ++// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */ ++// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */ ++// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */ ++// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */ ++// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */ ++// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */ ++// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */ ++// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */ ++// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */ ++// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */ ++// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */ ++// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */ ++// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */ ++// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */ ++// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */ ++// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */ ++// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */ ++// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */ ++// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */ ++// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */ ++// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */ ++// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */ ++// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */ ++// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */ ++// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */ ++// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */ ++// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */ ++// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */ ++// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */ ++// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */ ++// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */ ++// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */ ++// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */ ++// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */ ++// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */ ++// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */ ++// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */ ++// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */ ++// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */ ++// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */ ++// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */ ++// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */ ++// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */ ++// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */ ++// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */ ++// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */ ++// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */ ++// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */ ++// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */ ++// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */ ++// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */ ++// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */ ++// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */ ++// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */ ++// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */ ++// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */ ++// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */ ++// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */ ++// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */ ++// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */ ++// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */ ++// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */ ++// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */ ++ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */ ++// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */ ++// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */ ++// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */ ++// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */ ++// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */ ++// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */ ++// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */ ++// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */ ++// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */ ++// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */ ++// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */ ++// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */ ++// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */ ++// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */ ++// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */ ++// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */ ++// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */ ++// XRX200_WOL_CTRL_PORT, /* WoL Enable */ ++// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */ ++ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */ ++ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */ ++ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */ ++ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */ ++ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */ ++// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */ ++ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */ ++// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */ ++// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */ ++// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */ ++// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */ ++// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */ ++// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */ ++// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */ ++// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */ ++// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */ ++// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */ ++// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */ ++// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */ ++// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */ ++// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */ ++// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */ ++// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */ ++// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */ ++// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */ ++// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */ ++// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */ ++// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */ ++// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */ ++// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */ ++// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */ ++// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */ ++// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */ ++// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */ ++// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */ ++// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */ ++// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */ ++// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */ ++// XRX200_MAC_TEST, /* MAC Test Register */ ++// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */ ++// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */ ++// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */ ++// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */ ++// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */ ++// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */ ++// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */ ++// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */ ++// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */ ++// XRX200_MAC_FLEN, /* MAC Frame Length Register */ ++// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */ ++// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */ ++// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */ ++// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */ ++// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */ ++// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */ ++// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */ ++// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */ ++// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */ ++// XRX200_MAC_PSTAT, /* MAC Port Status Register */ ++// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */ ++ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */ ++ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */ ++ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */ ++// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */ ++// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */ ++// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */ ++// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */ ++ XRX200_MAC_PSTAT_LSTAT, /* Link Status */ ++// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */ ++// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */ ++// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */ ++// XRX200_MAC_PISR, /* MAC Interrupt Status Register */ ++// XRX200_MAC_PISR_PACT, /* PHY Active Status */ ++// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */ ++// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */ ++// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */ ++// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */ ++// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */ ++// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */ ++// XRX200_MAC_PISR_JAM, /* Jam Status Detected */ ++// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */ ++// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */ ++// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */ ++// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */ ++// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */ ++// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */ ++// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */ ++// XRX200_MAC_PIER_PACT, /* PHY Active Status */ ++// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */ ++// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */ ++// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */ ++// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */ ++// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */ ++// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */ ++// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */ ++// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */ ++// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */ ++// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */ ++// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */ ++// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */ ++// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */ ++// XRX200_MAC_CTRL_0, /* MAC Control Register0 */ ++// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */ ++// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */ ++// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */ ++// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */ ++// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */ ++// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */ ++// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */ ++ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */ ++// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */ ++// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */ ++// XRX200_MAC_CTRL_1, /* MAC Control Register1 */ ++// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */ ++// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */ ++// XRX200_MAC_CTRL_2, /* MAC Control Register2 */ ++// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */ ++// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */ ++// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */ ++// XRX200_MAC_CTRL_3, /* MAC Control Register3 */ ++// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */ ++// XRX200_MAC_CTRL_4, /* MAC Control Register4 */ ++// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */ ++// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */ ++// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */ ++// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */ ++// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */ ++// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */ ++// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */ ++// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */ ++// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */ ++// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */ ++// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */ ++// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */ ++// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */ ++// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */ ++// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */ ++// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */ ++// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */ ++// XRX200_MAC_TESTEN, /* MAC Test Enable Register */ ++// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */ ++// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */ ++// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */ ++// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */ ++// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */ ++// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */ ++// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */ ++// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */ ++// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */ ++// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */ ++// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */ ++// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */ ++// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */ ++// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */ ++// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */ ++// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */ ++// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */ ++// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */ ++// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */ ++// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */ ++// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */ ++// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */ ++// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */ ++// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */ ++// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */ ++// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */ ++// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */ ++// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */ ++// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */ ++// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */ ++// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */ ++// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */ ++// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */ ++// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */ ++// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */ ++// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */ ++// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */ ++// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ ++// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */ ++// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ ++// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */ ++// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */ ++// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */ ++// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */ ++// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */ ++// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */ ++// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */ ++// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */ ++// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */ ++// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */ ++// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */ ++// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */ ++// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */ ++// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */ ++// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */ ++// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */ ++// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */ ++// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */ ++// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */ ++// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */ ++// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */ ++// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */ ++// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */ ++// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */ ++// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */ ++// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */ ++// XRX200_SDMA_IER_BFULL, /* Buffer Full */ ++// XRX200_SDMA_IER_FERR, /* Frame Error */ ++// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */ ++// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */ ++// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */ ++// XRX200_SDMA_ISR_BFULL, /* Buffer Full */ ++// XRX200_SDMA_ISR_FERR, /* Frame Error */ ++// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */ ++// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */ ++// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */ ++// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */ ++// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */ ++// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */ ++// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */ ++// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */ ++// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */ ++// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */ ++// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */ ++// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */ ++// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */ ++// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */ ++// XRX200_SDMA_PCTRL_PEN, /* Port Enable */ ++// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */ ++// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */ ++// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */ ++// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */ ++// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */ ++// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */ ++// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */ ++// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */ ++// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */ ++// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */ ++}; ++ ++ ++struct xrx200sw_reg { ++ int offset; ++ int shift; ++ int size; ++ int mult; ++} xrx200sw_reg[] = { ++// offeset shift size mult ++// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */ ++// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */ ++// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */ ++// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */ ++// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */ ++// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */ ++// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */ ++// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */ ++// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */ ++// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */ ++// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */ ++// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */ ++// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */ ++// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */ ++// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */ ++// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */ ++// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */ ++// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */ ++// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */ ++// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */ ++// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */ ++// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */ ++// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */ ++// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */ ++// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */ ++// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */ ++// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */ ++// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */ ++// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */ ++// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */ ++// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */ ++// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */ ++// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */ ++// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */ ++// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */ ++// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */ ++// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */ ++// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */ ++// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */ ++// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */ ++// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */ ++// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */ ++// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */ ++// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */ ++// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */ ++// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */ ++// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */ ++// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */ ++// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */ ++// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */ ++// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */ ++// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */ ++// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */ ++// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */ ++// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */ ++// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */ ++// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */ ++// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */ ++// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */ ++// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */ ++// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */ ++// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */ ++// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */ ++// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */ ++// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */ ++// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */ ++// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */ ++// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */ ++// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */ ++// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */ ++// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */ ++// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */ ++// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */ ++// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */ ++// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */ ++// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */ ++// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */ ++// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */ ++// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */ ++// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */ ++// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */ ++// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */ ++// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */ ++// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */ ++// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */ ++// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */ ++// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */ ++// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */ ++// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */ ++// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */ ++// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */ ++// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */ ++// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */ ++// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */ ++// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */ ++// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */ ++// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */ ++// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */ ++// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */ ++// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */ ++// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */ ++// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */ ++// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */ ++// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */ ++// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */ ++// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */ ++// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */ ++// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */ ++// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */ ++// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */ ++// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */ ++// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */ ++// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */ ++// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */ ++// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */ ++// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */ ++// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */ ++// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */ ++// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */ ++// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */ ++// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */ ++// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */ ++// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */ ++// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */ ++// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */ ++// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */ ++// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */ ++// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */ ++// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */ ++// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */ ++// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */ ++// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */ ++// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */ ++// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */ ++// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */ ++// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */ ++// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */ ++// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */ ++// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */ ++// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */ ++// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */ ++// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */ ++ {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */ ++// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */ ++// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */ ++// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */ ++// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */ ++// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */ ++// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */ ++// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */ ++// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */ ++// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */ ++// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */ ++// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */ ++// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */ ++// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */ ++// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */ ++// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */ ++// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */ ++// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */ ++// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */ ++// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */ ++// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */ ++// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */ ++// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */ ++// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */ ++// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */ ++// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */ ++// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */ ++// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */ ++// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */ ++// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */ ++// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */ ++// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */ ++// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */ ++// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */ ++// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */ ++// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */ ++// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */ ++// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */ ++// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */ ++// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */ ++// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */ ++// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */ ++// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */ ++// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */ ++// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */ ++// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */ ++// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */ ++// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */ ++// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */ ++// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */ ++// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */ ++// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */ ++// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */ ++// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */ ++// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */ ++// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */ ++// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */ ++// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */ ++// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */ ++// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */ ++// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */ ++// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */ ++// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */ ++// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */ ++// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */ ++// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */ ++// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */ ++// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */ ++// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */ ++ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */ ++// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */ ++ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */ ++// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */ ++ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */ ++// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */ ++ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */ ++// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */ ++ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */ ++// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */ ++ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */ ++// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */ ++ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */ ++// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */ ++ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */ ++// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */ ++ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */ ++// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */ ++ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */ ++// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */ ++ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */ ++// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */ ++ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */ ++// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */ ++ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */ ++// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */ ++ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */ ++// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */ ++// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */ ++ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */ ++// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */ ++ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */ ++ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */ ++ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */ ++ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */ ++ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */ ++ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */ ++// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */ ++// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */ ++// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */ ++// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */ ++// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */ ++// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */ ++// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */ ++// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */ ++// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */ ++// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */ ++// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */ ++// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */ ++// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */ ++// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */ ++// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */ ++// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */ ++ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */ ++// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */ ++// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */ ++// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */ ++// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */ ++// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */ ++// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */ ++// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */ ++// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */ ++// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */ ++// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */ ++// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */ ++// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */ ++// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */ ++// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */ ++// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */ ++// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */ ++// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */ ++// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */ ++// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */ ++// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */ ++// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */ ++// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */ ++// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */ ++// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */ ++// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */ ++// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */ ++// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */ ++// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */ ++// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */ ++// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */ ++// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */ ++// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */ ++// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */ ++// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */ ++// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */ ++// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */ ++// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */ ++// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */ ++// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */ ++// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */ ++// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */ ++// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */ ++// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */ ++// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */ ++// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */ ++// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */ ++// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */ ++// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */ ++// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */ ++// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */ ++// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */ ++// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */ ++// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */ ++// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */ ++// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */ ++// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */ ++// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */ ++// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */ ++// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */ ++// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */ ++// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */ ++// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */ ++// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */ ++// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */ ++// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */ ++// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */ ++// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */ ++// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */ ++// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */ ++// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */ ++// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */ ++// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */ ++// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */ ++// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */ ++// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */ ++// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */ ++// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */ ++// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */ ++// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */ ++// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */ ++// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */ ++// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */ ++// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */ ++// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */ ++// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */ ++// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */ ++// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */ ++// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */ ++// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */ ++// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */ ++// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */ ++// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */ ++// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */ ++// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */ ++// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */ ++// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */ ++// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */ ++// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */ ++// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */ ++// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */ ++// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */ ++// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */ ++// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */ ++// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */ ++// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */ ++// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */ ++// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */ ++// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */ ++// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */ ++// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */ ++// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */ ++// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */ ++// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */ ++// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */ ++// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */ ++// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */ ++ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */ ++// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */ ++// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */ ++// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */ ++// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */ ++// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */ ++// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */ ++// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */ ++// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */ ++// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */ ++// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */ ++// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */ ++// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */ ++// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */ ++// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */ ++// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */ ++// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */ ++// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */ ++// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */ ++// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */ ++// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */ ++// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */ ++// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */ ++// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */ ++// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */ ++// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */ ++// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */ ++ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */ ++ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */ ++ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */ ++ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */ ++ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */ ++// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */ ++ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */ ++// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */ ++// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */ ++// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */ ++// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */ ++// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */ ++// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */ ++// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */ ++// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */ ++// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */ ++// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */ ++// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */ ++// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */ ++// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */ ++// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */ ++// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */ ++// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */ ++// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */ ++// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */ ++// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */ ++// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */ ++// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */ ++// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */ ++// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */ ++// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */ ++// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */ ++// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */ ++// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */ ++// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */ ++// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */ ++// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */ ++// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */ ++// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */ ++// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */ ++// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */ ++// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */ ++// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */ ++// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */ ++// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */ ++// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */ ++// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */ ++// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */ ++// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */ ++// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */ ++// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */ ++// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */ ++// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */ ++// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */ ++// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */ ++// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */ ++// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */ ++// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */ ++// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */ ++// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */ ++ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */ ++ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */ ++ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */ ++// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */ ++// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */ ++// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */ ++// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */ ++ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */ ++// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */ ++// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */ ++// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */ ++// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */ ++// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */ ++// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */ ++// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */ ++// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */ ++// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */ ++// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */ ++// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */ ++// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */ ++// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */ ++// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */ ++// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */ ++// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */ ++// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */ ++// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */ ++// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */ ++// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */ ++// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */ ++// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */ ++// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */ ++// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */ ++// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */ ++// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */ ++// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */ ++// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */ ++// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */ ++// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */ ++// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */ ++// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */ ++// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */ ++// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */ ++// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */ ++// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */ ++// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */ ++// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */ ++// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */ ++// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */ ++// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */ ++ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */ ++// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */ ++// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */ ++// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */ ++// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */ ++// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */ ++// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */ ++// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */ ++// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */ ++// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */ ++// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */ ++// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */ ++// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */ ++// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */ ++// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */ ++// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */ ++// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */ ++// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */ ++// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */ ++// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */ ++// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */ ++// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */ ++// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */ ++// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */ ++// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */ ++// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */ ++// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */ ++// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */ ++// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */ ++// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */ ++// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */ ++// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */ ++// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */ ++// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */ ++// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */ ++// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */ ++// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */ ++// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */ ++// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */ ++// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */ ++// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */ ++// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */ ++// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */ ++// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */ ++// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */ ++// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */ ++// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */ ++// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */ ++// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */ ++// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */ ++// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */ ++// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */ ++// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */ ++// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */ ++// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */ ++// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */ ++// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */ ++// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */ ++// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */ ++// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */ ++// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */ ++// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */ ++// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */ ++// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */ ++// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */ ++// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */ ++// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */ ++// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */ ++// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */ ++// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */ ++// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */ ++// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */ ++// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */ ++// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */ ++// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */ ++// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */ ++// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */ ++// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */ ++// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */ ++// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */ ++// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */ ++// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */ ++// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */ ++// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */ ++// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */ ++// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */ ++// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */ ++// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */ ++// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */ ++// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */ ++// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */ ++// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */ ++// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */ ++// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */ ++// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */ ++// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */ ++// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */ ++// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */ ++// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */ ++// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */ ++// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */ ++// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */ ++// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */ ++// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */ ++// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */ ++// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */ ++// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */ ++// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */ ++// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */ ++// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */ ++// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */ ++// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */ ++// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */ ++// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */ ++// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */ ++// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */ ++// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */ ++// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */ ++// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */ ++// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */ ++// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */ ++// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */ ++// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */ ++// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */ ++// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */ ++// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */ ++// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */ ++// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */ ++// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */ ++}; ++ ++ diff --git a/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch b/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch new file mode 100644 index 0000000000..6046d6cde1 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0026-NET-multi-phy-support.patch @@ -0,0 +1,53 @@ +From c6feeeb407a3b8a6597ae377ba4dd138e185e3dd Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 27 Jul 2014 09:38:50 +0100 +Subject: [PATCH 26/36] NET: multi phy support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/net/phy/phy.c | 9 ++++++--- + include/linux/phy.h | 1 + + 2 files changed, 7 insertions(+), 3 deletions(-) + +--- a/drivers/net/phy/phy.c ++++ b/drivers/net/phy/phy.c +@@ -1032,7 +1032,8 @@ void phy_state_machine(struct work_struc + /* If the link is down, give up on negotiation for now */ + if (!phydev->link) { + phydev->state = PHY_NOLINK; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + break; + } +@@ -1124,7 +1125,8 @@ void phy_state_machine(struct work_struc + netif_carrier_on(phydev->attached_dev); + } else { + phydev->state = PHY_NOLINK; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + } + + phydev->adjust_link(phydev->attached_dev); +@@ -1136,7 +1138,8 @@ void phy_state_machine(struct work_struc + case PHY_HALTED: + if (phydev->link) { + phydev->link = 0; +- netif_carrier_off(phydev->attached_dev); ++ if (!phydev->no_auto_carrier_off) ++ netif_carrier_off(phydev->attached_dev); + phydev->adjust_link(phydev->attached_dev); + do_suspend = true; + } +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -369,6 +369,7 @@ struct phy_device { + bool is_pseudo_fixed_link; + bool has_fixups; + bool suspended; ++ bool no_auto_carrier_off; + + enum phy_state state; + diff --git a/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch b/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch new file mode 100644 index 0000000000..dc99f48eae --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0028-NET-lantiq-various-etop-fixes.patch @@ -0,0 +1,880 @@ +From 870ed9cae083ff8a60a739ef7e74c5a1800533be Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Tue, 9 Sep 2014 22:45:34 +0200 +Subject: [PATCH 28/36] NET: lantiq: various etop fixes + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/net/ethernet/lantiq_etop.c | 555 +++++++++++++++++++++++++----------- + 1 file changed, 389 insertions(+), 166 deletions(-) + +--- a/drivers/net/ethernet/lantiq_etop.c ++++ b/drivers/net/ethernet/lantiq_etop.c +@@ -11,7 +11,7 @@ + * You should have received a copy of the GNU General Public License + * along with this program; if not, see <http://www.gnu.org/licenses/>. + * +- * Copyright (C) 2011 John Crispin <blogic@openwrt.org> ++ * Copyright (C) 2011-12 John Crispin <blogic@openwrt.org> + */ + + #include <linux/kernel.h> +@@ -30,11 +30,16 @@ + #include <linux/mm.h> + #include <linux/platform_device.h> + #include <linux/ethtool.h> ++#include <linux/if_vlan.h> + #include <linux/init.h> + #include <linux/delay.h> + #include <linux/io.h> + #include <linux/dma-mapping.h> + #include <linux/module.h> ++#include <linux/clk.h> ++#include <linux/of_net.h> ++#include <linux/of_irq.h> ++#include <linux/of_platform.h> + + #include <asm/checksum.h> + +@@ -42,7 +47,7 @@ + #include <xway_dma.h> + #include <lantiq_platform.h> + +-#define LTQ_ETOP_MDIO 0x11804 ++#define LTQ_ETOP_MDIO_ACC 0x11804 + #define MDIO_REQUEST 0x80000000 + #define MDIO_READ 0x40000000 + #define MDIO_ADDR_MASK 0x1f +@@ -51,44 +56,91 @@ + #define MDIO_REG_OFFSET 0x10 + #define MDIO_VAL_MASK 0xffff + +-#define PPE32_CGEN 0x800 +-#define LQ_PPE32_ENET_MAC_CFG 0x1840 ++#define LTQ_ETOP_MDIO_CFG 0x11800 ++#define MDIO_CFG_MASK 0x6 ++ ++#define LTQ_ETOP_CFG 0x11808 ++#define LTQ_ETOP_IGPLEN 0x11820 ++#define LTQ_ETOP_MAC_CFG 0x11840 + + #define LTQ_ETOP_ENETS0 0x11850 + #define LTQ_ETOP_MAC_DA0 0x1186C + #define LTQ_ETOP_MAC_DA1 0x11870 +-#define LTQ_ETOP_CFG 0x16020 +-#define LTQ_ETOP_IGPLEN 0x16080 ++ ++#define MAC_CFG_MASK 0xfff ++#define MAC_CFG_CGEN (1 << 11) ++#define MAC_CFG_DUPLEX (1 << 2) ++#define MAC_CFG_SPEED (1 << 1) ++#define MAC_CFG_LINK (1 << 0) + + #define MAX_DMA_CHAN 0x8 + #define MAX_DMA_CRC_LEN 0x4 + #define MAX_DMA_DATA_LEN 0x600 + + #define ETOP_FTCU BIT(28) +-#define ETOP_MII_MASK 0xf +-#define ETOP_MII_NORMAL 0xd +-#define ETOP_MII_REVERSE 0xe + #define ETOP_PLEN_UNDER 0x40 +-#define ETOP_CGEN 0x800 ++#define ETOP_CFG_MII0 0x01 + +-/* use 2 static channels for TX/RX */ +-#define LTQ_ETOP_TX_CHANNEL 1 +-#define LTQ_ETOP_RX_CHANNEL 6 +-#define IS_TX(x) (x == LTQ_ETOP_TX_CHANNEL) +-#define IS_RX(x) (x == LTQ_ETOP_RX_CHANNEL) ++#define ETOP_CFG_MASK 0xfff ++#define ETOP_CFG_FEN0 (1 << 8) ++#define ETOP_CFG_SEN0 (1 << 6) ++#define ETOP_CFG_OFF1 (1 << 3) ++#define ETOP_CFG_REMII0 (1 << 1) ++#define ETOP_CFG_OFF0 (1 << 0) ++ ++#define LTQ_GBIT_MDIO_CTL 0xCC ++#define LTQ_GBIT_MDIO_DATA 0xd0 ++#define LTQ_GBIT_GCTL0 0x68 ++#define LTQ_GBIT_PMAC_HD_CTL 0x8c ++#define LTQ_GBIT_P0_CTL 0x4 ++#define LTQ_GBIT_PMAC_RX_IPG 0xa8 ++#define LTQ_GBIT_RGMII_CTL 0x78 ++ ++#define PMAC_HD_CTL_AS (1 << 19) ++#define PMAC_HD_CTL_RXSH (1 << 22) ++ ++/* Switch Enable (0=disable, 1=enable) */ ++#define GCTL0_SE 0x80000000 ++/* Disable MDIO auto polling (0=disable, 1=enable) */ ++#define PX_CTL_DMDIO 0x00400000 ++ ++/* MDC clock divider, clock = 25MHz/((MDC_CLOCK + 1) * 2) */ ++#define MDC_CLOCK_MASK 0xff000000 ++#define MDC_CLOCK_OFFSET 24 ++ ++/* register information for the gbit's MDIO bus */ ++#define MDIO_XR9_REQUEST 0x00008000 ++#define MDIO_XR9_READ 0x00000800 ++#define MDIO_XR9_WRITE 0x00000400 ++#define MDIO_XR9_REG_MASK 0x1f ++#define MDIO_XR9_ADDR_MASK 0x1f ++#define MDIO_XR9_RD_MASK 0xffff ++#define MDIO_XR9_REG_OFFSET 0 ++#define MDIO_XR9_ADDR_OFFSET 5 ++#define MDIO_XR9_WR_OFFSET 16 + ++#define LTQ_DMA_ETOP ((of_machine_is_compatible("lantiq,ase")) ? \ ++ (INT_NUM_IM3_IRL0) : (INT_NUM_IM2_IRL0)) ++ ++/* the newer xway socks have a embedded 3/7 port gbit multiplexer */ + #define ltq_etop_r32(x) ltq_r32(ltq_etop_membase + (x)) + #define ltq_etop_w32(x, y) ltq_w32(x, ltq_etop_membase + (y)) + #define ltq_etop_w32_mask(x, y, z) \ + ltq_w32_mask(x, y, ltq_etop_membase + (z)) + +-#define DRV_VERSION "1.0" ++#define ltq_gbit_r32(x) ltq_r32(ltq_gbit_membase + (x)) ++#define ltq_gbit_w32(x, y) ltq_w32(x, ltq_gbit_membase + (y)) ++#define ltq_gbit_w32_mask(x, y, z) \ ++ ltq_w32_mask(x, y, ltq_gbit_membase + (z)) ++ ++#define DRV_VERSION "1.2" + + static void __iomem *ltq_etop_membase; ++static void __iomem *ltq_gbit_membase; + + struct ltq_etop_chan { +- int idx; + int tx_free; ++ int irq; + struct net_device *netdev; + struct napi_struct napi; + struct ltq_dma_channel dma; +@@ -98,21 +150,34 @@ struct ltq_etop_chan { + struct ltq_etop_priv { + struct net_device *netdev; + struct platform_device *pdev; +- struct ltq_eth_data *pldata; + struct resource *res; + + struct mii_bus *mii_bus; + +- struct ltq_etop_chan ch[MAX_DMA_CHAN]; +- int tx_free[MAX_DMA_CHAN >> 1]; ++ struct ltq_etop_chan txch; ++ struct ltq_etop_chan rxch; ++ ++ int tx_irq; ++ int rx_irq; ++ ++ unsigned char mac[6]; ++ int mii_mode; + + spinlock_t lock; ++ ++ struct clk *clk_ppe; ++ struct clk *clk_switch; ++ struct clk *clk_ephy; ++ struct clk *clk_ephycgu; + }; + ++static int ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, ++ int phy_reg, u16 phy_data); ++ + static int + ltq_etop_alloc_skb(struct ltq_etop_chan *ch) + { +- ch->skb[ch->dma.desc] = netdev_alloc_skb(ch->netdev, MAX_DMA_DATA_LEN); ++ ch->skb[ch->dma.desc] = dev_alloc_skb(MAX_DMA_DATA_LEN); + if (!ch->skb[ch->dma.desc]) + return -ENOMEM; + ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL, +@@ -147,8 +212,11 @@ ltq_etop_hw_receive(struct ltq_etop_chan + spin_unlock_irqrestore(&priv->lock, flags); + + skb_put(skb, len); ++ skb->dev = ch->netdev; + skb->protocol = eth_type_trans(skb, ch->netdev); + netif_receive_skb(skb); ++ ch->netdev->stats.rx_packets++; ++ ch->netdev->stats.rx_bytes += len; + } + + static int +@@ -156,7 +224,9 @@ ltq_etop_poll_rx(struct napi_struct *nap + { + struct ltq_etop_chan *ch = container_of(napi, + struct ltq_etop_chan, napi); ++ struct ltq_etop_priv *priv = netdev_priv(ch->netdev); + int work_done = 0; ++ unsigned long flags; + + while (work_done < budget) { + struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; +@@ -168,7 +238,9 @@ ltq_etop_poll_rx(struct napi_struct *nap + } + if (work_done < budget) { + napi_complete_done(&ch->napi, work_done); ++ spin_lock_irqsave(&priv->lock, flags); + ltq_dma_ack_irq(&ch->dma); ++ spin_unlock_irqrestore(&priv->lock, flags); + } + return work_done; + } +@@ -180,12 +252,14 @@ ltq_etop_poll_tx(struct napi_struct *nap + container_of(napi, struct ltq_etop_chan, napi); + struct ltq_etop_priv *priv = netdev_priv(ch->netdev); + struct netdev_queue *txq = +- netdev_get_tx_queue(ch->netdev, ch->idx >> 1); ++ netdev_get_tx_queue(ch->netdev, ch->dma.nr >> 1); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + while ((ch->dma.desc_base[ch->tx_free].ctl & + (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) { ++ ch->netdev->stats.tx_packets++; ++ ch->netdev->stats.tx_bytes += ch->skb[ch->tx_free]->len; + dev_kfree_skb_any(ch->skb[ch->tx_free]); + ch->skb[ch->tx_free] = NULL; + memset(&ch->dma.desc_base[ch->tx_free], 0, +@@ -198,7 +272,9 @@ ltq_etop_poll_tx(struct napi_struct *nap + if (netif_tx_queue_stopped(txq)) + netif_tx_start_queue(txq); + napi_complete(&ch->napi); ++ spin_lock_irqsave(&priv->lock, flags); + ltq_dma_ack_irq(&ch->dma); ++ spin_unlock_irqrestore(&priv->lock, flags); + return 1; + } + +@@ -206,9 +282,10 @@ static irqreturn_t + ltq_etop_dma_irq(int irq, void *_priv) + { + struct ltq_etop_priv *priv = _priv; +- int ch = irq - LTQ_DMA_CH0_INT; +- +- napi_schedule(&priv->ch[ch].napi); ++ if (irq == priv->txch.dma.irq) ++ napi_schedule(&priv->txch.napi); ++ else ++ napi_schedule(&priv->rxch.napi); + return IRQ_HANDLED; + } + +@@ -220,7 +297,7 @@ ltq_etop_free_channel(struct net_device + ltq_dma_free(&ch->dma); + if (ch->dma.irq) + free_irq(ch->dma.irq, priv); +- if (IS_RX(ch->idx)) { ++ if (ch == &priv->txch) { + int desc; + for (desc = 0; desc < LTQ_DESC_NUM; desc++) + dev_kfree_skb_any(ch->skb[ch->dma.desc]); +@@ -231,65 +308,133 @@ static void + ltq_etop_hw_exit(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; + +- ltq_pmu_disable(PMU_PPE); +- for (i = 0; i < MAX_DMA_CHAN; i++) +- if (IS_TX(i) || IS_RX(i)) +- ltq_etop_free_channel(dev, &priv->ch[i]); ++ clk_disable(priv->clk_ppe); ++ ++ if (of_machine_is_compatible("lantiq,ar9")) ++ clk_disable(priv->clk_switch); ++ ++ if (of_machine_is_compatible("lantiq,ase")) { ++ clk_disable(priv->clk_ephy); ++ clk_disable(priv->clk_ephycgu); ++ } ++ ++ ltq_etop_free_channel(dev, &priv->txch); ++ ltq_etop_free_channel(dev, &priv->rxch); ++} ++ ++static void ++ltq_etop_gbit_init(struct net_device *dev) ++{ ++ struct ltq_etop_priv *priv = netdev_priv(dev); ++ ++ clk_enable(priv->clk_switch); ++ ++ /* enable gbit port0 on the SoC */ ++ ltq_gbit_w32_mask((1 << 17), (1 << 18), LTQ_GBIT_P0_CTL); ++ ++ ltq_gbit_w32_mask(0, GCTL0_SE, LTQ_GBIT_GCTL0); ++ /* disable MDIO auto polling mode */ ++ ltq_gbit_w32_mask(0, PX_CTL_DMDIO, LTQ_GBIT_P0_CTL); ++ /* set 1522 packet size */ ++ ltq_gbit_w32_mask(0x300, 0, LTQ_GBIT_GCTL0); ++ /* disable pmac & dmac headers */ ++ ltq_gbit_w32_mask(PMAC_HD_CTL_AS | PMAC_HD_CTL_RXSH, 0, ++ LTQ_GBIT_PMAC_HD_CTL); ++ /* Due to traffic halt when burst length 8, ++ replace default IPG value with 0x3B */ ++ ltq_gbit_w32(0x3B, LTQ_GBIT_PMAC_RX_IPG); ++ /* set mdc clock to 2.5 MHz */ ++ ltq_gbit_w32_mask(MDC_CLOCK_MASK, 4 << MDC_CLOCK_OFFSET, ++ LTQ_GBIT_RGMII_CTL); + } + + static int + ltq_etop_hw_init(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; ++ int mii_mode = priv->mii_mode; ++ ++ clk_enable(priv->clk_ppe); + +- ltq_pmu_enable(PMU_PPE); ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ ltq_etop_gbit_init(dev); ++ /* force the etops link to the gbit to MII */ ++ mii_mode = PHY_INTERFACE_MODE_MII; ++ } ++ ltq_etop_w32_mask(MDIO_CFG_MASK, 0, LTQ_ETOP_MDIO_CFG); ++ ltq_etop_w32_mask(MAC_CFG_MASK, MAC_CFG_CGEN | MAC_CFG_DUPLEX | ++ MAC_CFG_SPEED | MAC_CFG_LINK, LTQ_ETOP_MAC_CFG); + +- switch (priv->pldata->mii_mode) { ++ switch (mii_mode) { + case PHY_INTERFACE_MODE_RMII: +- ltq_etop_w32_mask(ETOP_MII_MASK, +- ETOP_MII_REVERSE, LTQ_ETOP_CFG); ++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_REMII0 | ETOP_CFG_OFF1 | ++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG); + break; + + case PHY_INTERFACE_MODE_MII: +- ltq_etop_w32_mask(ETOP_MII_MASK, +- ETOP_MII_NORMAL, LTQ_ETOP_CFG); ++ ltq_etop_w32_mask(ETOP_CFG_MASK, ETOP_CFG_OFF1 | ++ ETOP_CFG_SEN0 | ETOP_CFG_FEN0, LTQ_ETOP_CFG); + break; + + default: ++ if (of_machine_is_compatible("lantiq,ase")) { ++ clk_enable(priv->clk_ephy); ++ /* disable external MII */ ++ ltq_etop_w32_mask(0, ETOP_CFG_MII0, LTQ_ETOP_CFG); ++ /* enable clock for internal PHY */ ++ clk_enable(priv->clk_ephycgu); ++ /* we need to write this magic to the internal phy to ++ make it work */ ++ ltq_etop_mdio_wr(NULL, 0x8, 0x12, 0xC020); ++ pr_info("Selected EPHY mode\n"); ++ break; ++ } + netdev_err(dev, "unknown mii mode %d\n", +- priv->pldata->mii_mode); ++ mii_mode); + return -ENOTSUPP; + } + +- /* enable crc generation */ +- ltq_etop_w32(PPE32_CGEN, LQ_PPE32_ENET_MAC_CFG); ++ return 0; ++} ++ ++static int ++ltq_etop_dma_init(struct net_device *dev) ++{ ++ struct ltq_etop_priv *priv = netdev_priv(dev); ++ int tx = priv->tx_irq - LTQ_DMA_ETOP; ++ int rx = priv->rx_irq - LTQ_DMA_ETOP; ++ int err; + + ltq_dma_init_port(DMA_PORT_ETOP); + +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- int irq = LTQ_DMA_CH0_INT + i; +- struct ltq_etop_chan *ch = &priv->ch[i]; +- +- ch->idx = ch->dma.nr = i; +- +- if (IS_TX(i)) { +- ltq_dma_alloc_tx(&ch->dma); +- request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv); +- } else if (IS_RX(i)) { +- ltq_dma_alloc_rx(&ch->dma); +- for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM; +- ch->dma.desc++) +- if (ltq_etop_alloc_skb(ch)) +- return -ENOMEM; +- ch->dma.desc = 0; +- request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv); ++ priv->txch.dma.nr = tx; ++ ltq_dma_alloc_tx(&priv->txch.dma); ++ err = request_irq(priv->tx_irq, ltq_etop_dma_irq, 0, "eth_tx", priv); ++ if (err) { ++ netdev_err(dev, "failed to allocate tx irq\n"); ++ goto err_out; ++ } ++ priv->txch.dma.irq = priv->tx_irq; ++ ++ priv->rxch.dma.nr = rx; ++ ltq_dma_alloc_rx(&priv->rxch.dma); ++ for (priv->rxch.dma.desc = 0; priv->rxch.dma.desc < LTQ_DESC_NUM; ++ priv->rxch.dma.desc++) { ++ if (ltq_etop_alloc_skb(&priv->rxch)) { ++ netdev_err(dev, "failed to allocate skbs\n"); ++ err = -ENOMEM; ++ goto err_out; + } +- ch->dma.irq = irq; + } +- return 0; ++ priv->rxch.dma.desc = 0; ++ err = request_irq(priv->rx_irq, ltq_etop_dma_irq, 0, "eth_rx", priv); ++ if (err) ++ netdev_err(dev, "failed to allocate rx irq\n"); ++ else ++ priv->rxch.dma.irq = priv->rx_irq; ++err_out: ++ return err; + } + + static void +@@ -303,7 +448,10 @@ ltq_etop_get_drvinfo(struct net_device * + static int + ltq_etop_nway_reset(struct net_device *dev) + { +- return phy_start_aneg(dev->phydev); ++ if (dev->phydev) ++ return phy_start_aneg(dev->phydev); ++ else ++ return 0; + } + + static const struct ethtool_ops ltq_etop_ethtool_ops = { +@@ -314,6 +462,39 @@ static const struct ethtool_ops ltq_etop + }; + + static int ++ltq_etop_mdio_wr_xr9(struct mii_bus *bus, int phy_addr, ++ int phy_reg, u16 phy_data) ++{ ++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_WRITE | ++ (phy_data << MDIO_XR9_WR_OFFSET) | ++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | ++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); ++ ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ return 0; ++} ++ ++static int ++ltq_etop_mdio_rd_xr9(struct mii_bus *bus, int phy_addr, int phy_reg) ++{ ++ u32 val = MDIO_XR9_REQUEST | MDIO_XR9_READ | ++ ((phy_addr & MDIO_XR9_ADDR_MASK) << MDIO_XR9_ADDR_OFFSET) | ++ ((phy_reg & MDIO_XR9_REG_MASK) << MDIO_XR9_REG_OFFSET); ++ ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ ltq_gbit_w32(val, LTQ_GBIT_MDIO_CTL); ++ while (ltq_gbit_r32(LTQ_GBIT_MDIO_CTL) & MDIO_XR9_REQUEST) ++ ; ++ val = ltq_gbit_r32(LTQ_GBIT_MDIO_DATA) & MDIO_XR9_RD_MASK; ++ return val; ++} ++ ++static int + ltq_etop_mdio_wr(struct mii_bus *bus, int phy_addr, int phy_reg, u16 phy_data) + { + u32 val = MDIO_REQUEST | +@@ -321,9 +502,9 @@ ltq_etop_mdio_wr(struct mii_bus *bus, in + ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET) | + phy_data; + +- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) ++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) + ; +- ltq_etop_w32(val, LTQ_ETOP_MDIO); ++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC); + return 0; + } + +@@ -334,12 +515,12 @@ ltq_etop_mdio_rd(struct mii_bus *bus, in + ((phy_addr & MDIO_ADDR_MASK) << MDIO_ADDR_OFFSET) | + ((phy_reg & MDIO_REG_MASK) << MDIO_REG_OFFSET); + +- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) ++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) + ; +- ltq_etop_w32(val, LTQ_ETOP_MDIO); +- while (ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_REQUEST) ++ ltq_etop_w32(val, LTQ_ETOP_MDIO_ACC); ++ while (ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_REQUEST) + ; +- val = ltq_etop_r32(LTQ_ETOP_MDIO) & MDIO_VAL_MASK; ++ val = ltq_etop_r32(LTQ_ETOP_MDIO_ACC) & MDIO_VAL_MASK; + return val; + } + +@@ -354,8 +535,18 @@ ltq_etop_mdio_probe(struct net_device *d + { + struct ltq_etop_priv *priv = netdev_priv(dev); + struct phy_device *phydev; ++ u32 phy_supported = (SUPPORTED_10baseT_Half ++ | SUPPORTED_10baseT_Full ++ | SUPPORTED_100baseT_Half ++ | SUPPORTED_100baseT_Full ++ | SUPPORTED_Autoneg ++ | SUPPORTED_MII ++ | SUPPORTED_TP); + +- phydev = phy_find_first(priv->mii_bus); ++ if (of_machine_is_compatible("lantiq,ase")) ++ phydev = mdiobus_get_phy(priv->mii_bus, 8); ++ else ++ phydev = mdiobus_get_phy(priv->mii_bus, 0); + + if (!phydev) { + netdev_err(dev, "no PHY found\n"); +@@ -363,21 +554,18 @@ ltq_etop_mdio_probe(struct net_device *d + } + + phydev = phy_connect(dev, phydev_name(phydev), +- <q_etop_mdio_link, priv->pldata->mii_mode); ++ <q_etop_mdio_link, priv->mii_mode); + + if (IS_ERR(phydev)) { + netdev_err(dev, "Could not attach to PHY\n"); + return PTR_ERR(phydev); + } + +- phydev->supported &= (SUPPORTED_10baseT_Half +- | SUPPORTED_10baseT_Full +- | SUPPORTED_100baseT_Half +- | SUPPORTED_100baseT_Full +- | SUPPORTED_Autoneg +- | SUPPORTED_MII +- | SUPPORTED_TP); ++ if (of_machine_is_compatible("lantiq,ar9")) ++ phy_supported |= SUPPORTED_1000baseT_Half ++ | SUPPORTED_1000baseT_Full; + ++ phydev->supported &= phy_supported; + phydev->advertising = phydev->supported; + phy_attached_info(phydev); + +@@ -398,8 +586,13 @@ ltq_etop_mdio_init(struct net_device *de + } + + priv->mii_bus->priv = dev; +- priv->mii_bus->read = ltq_etop_mdio_rd; +- priv->mii_bus->write = ltq_etop_mdio_wr; ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ priv->mii_bus->read = ltq_etop_mdio_rd_xr9; ++ priv->mii_bus->write = ltq_etop_mdio_wr_xr9; ++ } else { ++ priv->mii_bus->read = ltq_etop_mdio_rd; ++ priv->mii_bus->write = ltq_etop_mdio_wr; ++ } + priv->mii_bus->name = "ltq_mii"; + snprintf(priv->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", + priv->pdev->name, priv->pdev->id); +@@ -436,17 +629,19 @@ static int + ltq_etop_open(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; ++ unsigned long flags; + +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- struct ltq_etop_chan *ch = &priv->ch[i]; ++ napi_enable(&priv->txch.napi); ++ napi_enable(&priv->rxch.napi); ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ ltq_dma_open(&priv->txch.dma); ++ ltq_dma_open(&priv->rxch.dma); ++ spin_unlock_irqrestore(&priv->lock, flags); ++ ++ if (dev->phydev) ++ phy_start(dev->phydev); + +- if (!IS_TX(i) && (!IS_RX(i))) +- continue; +- ltq_dma_open(&ch->dma); +- napi_enable(&ch->napi); +- } +- phy_start(dev->phydev); + netif_tx_start_all_queues(dev); + return 0; + } +@@ -455,18 +650,19 @@ static int + ltq_etop_stop(struct net_device *dev) + { + struct ltq_etop_priv *priv = netdev_priv(dev); +- int i; ++ unsigned long flags; + + netif_tx_stop_all_queues(dev); +- phy_stop(dev->phydev); +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- struct ltq_etop_chan *ch = &priv->ch[i]; +- +- if (!IS_RX(i) && !IS_TX(i)) +- continue; +- napi_disable(&ch->napi); +- ltq_dma_close(&ch->dma); +- } ++ if (dev->phydev) ++ phy_stop(dev->phydev); ++ napi_disable(&priv->txch.napi); ++ napi_disable(&priv->rxch.napi); ++ ++ spin_lock_irqsave(&priv->lock, flags); ++ ltq_dma_close(&priv->txch.dma); ++ ltq_dma_close(&priv->rxch.dma); ++ spin_unlock_irqrestore(&priv->lock, flags); ++ + return 0; + } + +@@ -476,16 +672,16 @@ ltq_etop_tx(struct sk_buff *skb, struct + int queue = skb_get_queue_mapping(skb); + struct netdev_queue *txq = netdev_get_tx_queue(dev, queue); + struct ltq_etop_priv *priv = netdev_priv(dev); +- struct ltq_etop_chan *ch = &priv->ch[(queue << 1) | 1]; +- struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc]; +- int len; ++ struct ltq_dma_desc *desc = ++ &priv->txch.dma.desc_base[priv->txch.dma.desc]; + unsigned long flags; + u32 byte_offset; ++ int len; + + len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len; + +- if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) { +- dev_kfree_skb_any(skb); ++ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ++ priv->txch.skb[priv->txch.dma.desc]) { + netdev_err(dev, "tx ring full\n"); + netif_tx_stop_queue(txq); + return NETDEV_TX_BUSY; +@@ -493,7 +689,7 @@ ltq_etop_tx(struct sk_buff *skb, struct + + /* dma needs to start on a 16 byte aligned address */ + byte_offset = CPHYSADDR(skb->data) % 16; +- ch->skb[ch->dma.desc] = skb; ++ priv->txch.skb[priv->txch.dma.desc] = skb; + + netif_trans_update(dev); + +@@ -503,11 +699,11 @@ ltq_etop_tx(struct sk_buff *skb, struct + wmb(); + desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP | + LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK); +- ch->dma.desc++; +- ch->dma.desc %= LTQ_DESC_NUM; ++ priv->txch.dma.desc++; ++ priv->txch.dma.desc %= LTQ_DESC_NUM; + spin_unlock_irqrestore(&priv->lock, flags); + +- if (ch->dma.desc_base[ch->dma.desc].ctl & LTQ_DMA_OWN) ++ if (priv->txch.dma.desc_base[priv->txch.dma.desc].ctl & LTQ_DMA_OWN) + netif_tx_stop_queue(txq); + + return NETDEV_TX_OK; +@@ -522,8 +718,10 @@ ltq_etop_change_mtu(struct net_device *d + struct ltq_etop_priv *priv = netdev_priv(dev); + unsigned long flags; + ++ int max = ETH_HLEN + VLAN_HLEN + new_mtu + ETH_FCS_LEN; ++ + spin_lock_irqsave(&priv->lock, flags); +- ltq_etop_w32((ETOP_PLEN_UNDER << 16) | new_mtu, ++ ltq_etop_w32((ETOP_PLEN_UNDER << 16) | max, + LTQ_ETOP_IGPLEN); + spin_unlock_irqrestore(&priv->lock, flags); + } +@@ -592,6 +790,9 @@ ltq_etop_init(struct net_device *dev) + if (err) + goto err_hw; + ltq_etop_change_mtu(dev, 1500); ++ err = ltq_etop_dma_init(dev); ++ if (err) ++ goto err_hw; + + memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); + if (!is_valid_ether_addr(mac.sa_data)) { +@@ -609,9 +810,10 @@ ltq_etop_init(struct net_device *dev) + dev->addr_assign_type = NET_ADDR_RANDOM; + + ltq_etop_set_multicast_list(dev); +- err = ltq_etop_mdio_init(dev); +- if (err) +- goto err_netdev; ++ if (!ltq_etop_mdio_init(dev)) ++ dev->ethtool_ops = <q_etop_ethtool_ops; ++ else ++ pr_warn("etop: mdio probe failed\n");; + return 0; + + err_netdev: +@@ -631,6 +833,9 @@ ltq_etop_tx_timeout(struct net_device *d + err = ltq_etop_hw_init(dev); + if (err) + goto err_hw; ++ err = ltq_etop_dma_init(dev); ++ if (err) ++ goto err_hw; + netif_trans_update(dev); + netif_wake_queue(dev); + return; +@@ -654,14 +859,19 @@ static const struct net_device_ops ltq_e + .ndo_tx_timeout = ltq_etop_tx_timeout, + }; + +-static int __init +-ltq_etop_probe(struct platform_device *pdev) ++static int ltq_etop_probe(struct platform_device *pdev) + { + struct net_device *dev; + struct ltq_etop_priv *priv; +- struct resource *res; ++ struct resource *res, *gbit_res, irqres[2]; ++ const u8 *mac; + int err; +- int i; ++ ++ err = of_irq_to_resource_table(pdev->dev.of_node, irqres, 2); ++ if (err != 2) { ++ dev_err(&pdev->dev, "failed to get etop irqs\n"); ++ return -EINVAL; ++ } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { +@@ -687,31 +897,62 @@ ltq_etop_probe(struct platform_device *p + goto err_out; + } + +- dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); +- if (!dev) { +- err = -ENOMEM; +- goto err_out; ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ gbit_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); ++ if (!gbit_res) { ++ dev_err(&pdev->dev, "failed to get gbit resource\n"); ++ err = -ENOENT; ++ goto err_out; ++ } ++ ltq_gbit_membase = devm_ioremap_nocache(&pdev->dev, ++ gbit_res->start, resource_size(gbit_res)); ++ if (!ltq_gbit_membase) { ++ dev_err(&pdev->dev, "failed to remap gigabit switch %d\n", ++ pdev->id); ++ err = -ENOMEM; ++ goto err_out; ++ } + } ++ ++ dev = alloc_etherdev_mq(sizeof(struct ltq_etop_priv), 4); + strcpy(dev->name, "eth%d"); + dev->netdev_ops = <q_eth_netdev_ops; +- dev->ethtool_ops = <q_etop_ethtool_ops; + priv = netdev_priv(dev); + priv->res = res; + priv->pdev = pdev; +- priv->pldata = dev_get_platdata(&pdev->dev); + priv->netdev = dev; ++ priv->tx_irq = irqres[0].start; ++ priv->rx_irq = irqres[1].start; ++ priv->mii_mode = of_get_phy_mode(pdev->dev.of_node); ++ ++ mac = of_get_mac_address(pdev->dev.of_node); ++ if (mac) ++ memcpy(priv->mac, mac, ETH_ALEN); ++ ++ priv->clk_ppe = clk_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->clk_ppe)) ++ return PTR_ERR(priv->clk_ppe); ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ priv->clk_switch = clk_get(&pdev->dev, "switch"); ++ if (IS_ERR(priv->clk_switch)) ++ return PTR_ERR(priv->clk_switch); ++ } ++ if (of_machine_is_compatible("lantiq,ase")) { ++ priv->clk_ephy = clk_get(&pdev->dev, "ephy"); ++ if (IS_ERR(priv->clk_ephy)) ++ return PTR_ERR(priv->clk_ephy); ++ priv->clk_ephycgu = clk_get(&pdev->dev, "ephycgu"); ++ if (IS_ERR(priv->clk_ephycgu)) ++ return PTR_ERR(priv->clk_ephycgu); ++ } ++ + spin_lock_init(&priv->lock); + SET_NETDEV_DEV(dev, &pdev->dev); + +- for (i = 0; i < MAX_DMA_CHAN; i++) { +- if (IS_TX(i)) +- netif_napi_add(dev, &priv->ch[i].napi, +- ltq_etop_poll_tx, 8); +- else if (IS_RX(i)) +- netif_napi_add(dev, &priv->ch[i].napi, +- ltq_etop_poll_rx, 32); +- priv->ch[i].netdev = dev; +- } ++ netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8); ++ netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32); ++ priv->txch.netdev = dev; ++ priv->rxch.netdev = dev; + + err = register_netdev(dev); + if (err) +@@ -740,31 +981,22 @@ ltq_etop_remove(struct platform_device * + return 0; + } + ++static const struct of_device_id ltq_etop_match[] = { ++ { .compatible = "lantiq,etop-xway" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ltq_etop_match); ++ + static struct platform_driver ltq_mii_driver = { ++ .probe = ltq_etop_probe, + .remove = ltq_etop_remove, + .driver = { + .name = "ltq_etop", ++ .of_match_table = ltq_etop_match, + }, + }; + +-int __init +-init_ltq_etop(void) +-{ +- int ret = platform_driver_probe(<q_mii_driver, ltq_etop_probe); +- +- if (ret) +- pr_err("ltq_etop: Error registering platform driver!"); +- return ret; +-} +- +-static void __exit +-exit_ltq_etop(void) +-{ +- platform_driver_unregister(<q_mii_driver); +-} +- +-module_init(init_ltq_etop); +-module_exit(exit_ltq_etop); ++module_platform_driver(ltq_mii_driver); + + MODULE_AUTHOR("John Crispin <blogic@openwrt.org>"); + MODULE_DESCRIPTION("Lantiq SoC ETOP"); diff --git a/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch b/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch new file mode 100644 index 0000000000..e2a421b27e --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0030-GPIO-add-named-gpio-exports.patch @@ -0,0 +1,170 @@ +From cc809a441d8f2924f785eb863dfa6aef47a25b0b Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Tue, 12 Aug 2014 20:49:27 +0200 +Subject: [PATCH 30/36] GPIO: add named gpio exports + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ + drivers/gpio/gpiolib.c | 11 +++++-- + include/asm-generic/gpio.h | 5 +++ + include/linux/gpio/consumer.h | 8 +++++ + 4 files changed, 90 insertions(+), 2 deletions(-) + +--- a/drivers/gpio/gpiolib-of.c ++++ b/drivers/gpio/gpiolib-of.c +@@ -23,6 +23,8 @@ + #include <linux/pinctrl/pinctrl.h> + #include <linux/slab.h> + #include <linux/gpio/machine.h> ++#include <linux/init.h> ++#include <linux/platform_device.h> + + #include "gpiolib.h" + +@@ -538,3 +540,73 @@ void of_gpiochip_remove(struct gpio_chip + gpiochip_remove_pin_ranges(chip); + of_node_put(chip->of_node); + } ++ ++#ifdef CONFIG_GPIO_SYSFS ++ ++static struct of_device_id gpio_export_ids[] = { ++ { .compatible = "gpio-export" }, ++ { /* sentinel */ } ++}; ++ ++static int __init of_gpio_export_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node; ++ struct device_node *cnp; ++ u32 val; ++ int nb = 0; ++ ++ for_each_child_of_node(np, cnp) { ++ const char *name = NULL; ++ int gpio; ++ bool dmc; ++ int max_gpio = 1; ++ int i; ++ ++ of_property_read_string(cnp, "gpio-export,name", &name); ++ ++ if (!name) ++ max_gpio = of_gpio_count(cnp); ++ ++ for (i = 0; i < max_gpio; i++) { ++ unsigned flags = 0; ++ enum of_gpio_flags of_flags; ++ ++ gpio = of_get_gpio_flags(cnp, i, &of_flags); ++ ++ if (of_flags == OF_GPIO_ACTIVE_LOW) ++ flags |= GPIOF_ACTIVE_LOW; ++ ++ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) ++ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; ++ else ++ flags |= GPIOF_IN; ++ ++ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) ++ continue; ++ ++ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); ++ gpio_export_with_name(gpio, dmc, name); ++ nb++; ++ } ++ } ++ ++ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); ++ ++ return 0; ++} ++ ++static struct platform_driver gpio_export_driver = { ++ .driver = { ++ .name = "gpio-export", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(gpio_export_ids), ++ }, ++}; ++ ++static int __init of_gpio_export_init(void) ++{ ++ return platform_driver_probe(&gpio_export_driver, of_gpio_export_probe); ++} ++device_initcall(of_gpio_export_init); ++ ++#endif +--- a/include/asm-generic/gpio.h ++++ b/include/asm-generic/gpio.h +@@ -126,6 +126,12 @@ static inline int gpio_export(unsigned g + return gpiod_export(gpio_to_desc(gpio), direction_may_change); + } + ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); ++static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) ++{ ++ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); ++} ++ + static inline int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + { +--- a/include/linux/gpio/consumer.h ++++ b/include/linux/gpio/consumer.h +@@ -427,6 +427,7 @@ static inline struct gpio_desc *devm_get + + #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) + ++int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); + int gpiod_export(struct gpio_desc *desc, bool direction_may_change); + int gpiod_export_link(struct device *dev, const char *name, + struct gpio_desc *desc); +@@ -434,6 +435,13 @@ void gpiod_unexport(struct gpio_desc *de + + #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ + ++static inline int _gpiod_export(struct gpio_desc *desc, ++ bool direction_may_change, ++ const char *name) ++{ ++ return -ENOSYS; ++} ++ + static inline int gpiod_export(struct gpio_desc *desc, + bool direction_may_change) + { +--- a/drivers/gpio/gpiolib-sysfs.c ++++ b/drivers/gpio/gpiolib-sysfs.c +@@ -544,7 +544,7 @@ static struct class gpio_class = { + * + * Returns zero on success, else an error. + */ +-int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) + { + struct gpio_chip *chip; + struct gpio_device *gdev; +@@ -606,6 +606,8 @@ int gpiod_export(struct gpio_desc *desc, + offset = gpio_chip_hwgpio(desc); + if (chip->names && chip->names[offset]) + ioname = chip->names[offset]; ++ if (name) ++ ioname = name; + + dev = device_create_with_groups(&gpio_class, &gdev->dev, + MKDEV(0, 0), data, gpio_groups, +@@ -627,6 +629,12 @@ err_unlock: + gpiod_dbg(desc, "%s: status %d\n", __func__, status); + return status; + } ++EXPORT_SYMBOL_GPL(__gpiod_export); ++ ++int gpiod_export(struct gpio_desc *desc, bool direction_may_change) ++{ ++ return __gpiod_export(desc, direction_may_change, NULL); ++} + EXPORT_SYMBOL_GPL(gpiod_export); + + static int match_export(struct device *dev, const void *desc) diff --git a/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch b/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch new file mode 100644 index 0000000000..c275b55ef1 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0031-I2C-MIPS-lantiq-add-FALC-ON-i2c-bus-master.patch @@ -0,0 +1,1034 @@ +From f17e50f67fa3c77624edf2ca03fae0d50f0ce39b Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Thu, 7 Aug 2014 18:26:42 +0200 +Subject: [PATCH 31/36] I2C: MIPS: lantiq: add FALC-ON i2c bus master + +This patch adds the driver needed to make the I2C bus work on FALC-ON SoCs. + +Signed-off-by: Thomas Langer <thomas.langer@lantiq.com> +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/i2c/busses/Kconfig | 10 + + drivers/i2c/busses/Makefile | 1 + + drivers/i2c/busses/i2c-lantiq.c | 747 +++++++++++++++++++++++++++++++++++++++ + drivers/i2c/busses/i2c-lantiq.h | 234 ++++++++++++ + 4 files changed, 992 insertions(+) + create mode 100644 drivers/i2c/busses/i2c-lantiq.c + create mode 100644 drivers/i2c/busses/i2c-lantiq.h + +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -643,6 +643,16 @@ config I2C_MESON + If you say yes to this option, support will be included for the + I2C interface on the Amlogic Meson family of SoCs. + ++config I2C_LANTIQ ++ tristate "Lantiq I2C interface" ++ depends on LANTIQ && SOC_FALCON ++ help ++ If you say yes to this option, support will be included for the ++ Lantiq I2C core. ++ ++ This driver can also be built as a module. If so, the module ++ will be called i2c-lantiq. ++ + config I2C_MPC + tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx" + depends on PPC +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -59,6 +59,7 @@ obj-$(CONFIG_I2C_IMX) += i2c-imx.o + obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o + obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o + obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o ++obj-$(CONFIG_I2C_LANTIQ) += i2c-lantiq.o + obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o + obj-$(CONFIG_I2C_MESON) += i2c-meson.o + obj-$(CONFIG_I2C_MPC) += i2c-mpc.o +--- /dev/null ++++ b/drivers/i2c/busses/i2c-lantiq.c +@@ -0,0 +1,747 @@ ++ ++/* ++ * Lantiq I2C bus adapter ++ * ++ * Parts based on i2c-designware.c and other i2c drivers from Linux 2.6.33 ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * Copyright (C) 2012 Thomas Langer <thomas.langer@lantiq.com> ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/delay.h> ++#include <linux/slab.h> /* for kzalloc, kfree */ ++#include <linux/i2c.h> ++#include <linux/errno.h> ++#include <linux/completion.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/io.h> ++#include <linux/of_irq.h> ++ ++#include <lantiq_soc.h> ++#include "i2c-lantiq.h" ++ ++/* ++ * CURRENT ISSUES: ++ * - no high speed support ++ * - ten bit mode is not tested (no slave devices) ++ */ ++ ++/* access macros */ ++#define i2c_r32(reg) \ ++ __raw_readl(&(priv->membase)->reg) ++#define i2c_w32(val, reg) \ ++ __raw_writel(val, &(priv->membase)->reg) ++#define i2c_w32_mask(clear, set, reg) \ ++ i2c_w32((i2c_r32(reg) & ~(clear)) | (set), reg) ++ ++#define DRV_NAME "i2c-lantiq" ++#define DRV_VERSION "1.00" ++ ++#define LTQ_I2C_BUSY_TIMEOUT 20 /* ms */ ++ ++#ifdef DEBUG ++#define LTQ_I2C_XFER_TIMEOUT (25*HZ) ++#else ++#define LTQ_I2C_XFER_TIMEOUT HZ ++#endif ++ ++#define LTQ_I2C_IMSC_DEFAULT_MASK (I2C_IMSC_I2C_P_INT_EN | \ ++ I2C_IMSC_I2C_ERR_INT_EN) ++ ++#define LTQ_I2C_ARB_LOST (1 << 0) ++#define LTQ_I2C_NACK (1 << 1) ++#define LTQ_I2C_RX_UFL (1 << 2) ++#define LTQ_I2C_RX_OFL (1 << 3) ++#define LTQ_I2C_TX_UFL (1 << 4) ++#define LTQ_I2C_TX_OFL (1 << 5) ++ ++struct ltq_i2c { ++ struct mutex mutex; ++ ++ ++ /* active clock settings */ ++ unsigned int input_clock; /* clock input for i2c hardware block */ ++ unsigned int i2c_clock; /* approximated bus clock in kHz */ ++ ++ struct clk *clk_gate; ++ struct clk *clk_input; ++ ++ ++ /* resources (memory and interrupts) */ ++ int irq_lb; /* last burst irq */ ++ ++ struct lantiq_reg_i2c __iomem *membase; /* base of mapped registers */ ++ ++ struct i2c_adapter adap; ++ struct device *dev; ++ ++ struct completion cmd_complete; ++ ++ ++ /* message transfer data */ ++ struct i2c_msg *current_msg; /* current message */ ++ int msgs_num; /* number of messages to handle */ ++ u8 *msg_buf; /* current buffer */ ++ u32 msg_buf_len; /* remaining length of current buffer */ ++ int msg_err; /* error status of the current transfer */ ++ ++ ++ /* master status codes */ ++ enum { ++ STATUS_IDLE, ++ STATUS_ADDR, /* address phase */ ++ STATUS_WRITE, ++ STATUS_READ, ++ STATUS_READ_END, ++ STATUS_STOP ++ } status; ++}; ++ ++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id); ++ ++static inline void enable_burst_irq(struct ltq_i2c *priv) ++{ ++ i2c_w32_mask(0, I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, imsc); ++} ++static inline void disable_burst_irq(struct ltq_i2c *priv) ++{ ++ i2c_w32_mask(I2C_IMSC_LBREQ_INT_EN | I2C_IMSC_BREQ_INT_EN, 0, imsc); ++} ++ ++static void prepare_msg_send_addr(struct ltq_i2c *priv) ++{ ++ struct i2c_msg *msg = priv->current_msg; ++ int rd = !!(msg->flags & I2C_M_RD); /* extends to 0 or 1 */ ++ u16 addr = msg->addr; ++ ++ /* new i2c_msg */ ++ priv->msg_buf = msg->buf; ++ priv->msg_buf_len = msg->len; ++ if (rd) ++ priv->status = STATUS_READ; ++ else ++ priv->status = STATUS_WRITE; ++ ++ /* send slave address */ ++ if (msg->flags & I2C_M_TEN) { ++ i2c_w32(0xf0 | ((addr & 0x300) >> 7) | rd, txd); ++ i2c_w32(addr & 0xff, txd); ++ } else { ++ i2c_w32((addr & 0x7f) << 1 | rd, txd); ++ } ++} ++ ++static void ltq_i2c_set_tx_len(struct ltq_i2c *priv) ++{ ++ struct i2c_msg *msg = priv->current_msg; ++ int len = (msg->flags & I2C_M_TEN) ? 2 : 1; ++ ++ pr_debug("set_tx_len %cX\n", (msg->flags & I2C_M_RD) ? 'R' : 'T'); ++ ++ priv->status = STATUS_ADDR; ++ ++ if (!(msg->flags & I2C_M_RD)) ++ len += msg->len; ++ else ++ /* set maximum received packet size (before rx int!) */ ++ i2c_w32(msg->len, mrps_ctrl); ++ i2c_w32(len, tps_ctrl); ++ enable_burst_irq(priv); ++} ++ ++static int ltq_i2c_hw_set_clock(struct i2c_adapter *adap) ++{ ++ struct ltq_i2c *priv = i2c_get_adapdata(adap); ++ unsigned int input_clock = clk_get_rate(priv->clk_input); ++ u32 dec, inc = 1; ++ ++ /* clock changed? */ ++ if (priv->input_clock == input_clock) ++ return 0; ++ ++ /* ++ * this formula is only an approximation, found by the recommended ++ * values in the "I2C Architecture Specification 1.7.1" ++ */ ++ dec = input_clock / (priv->i2c_clock * 2); ++ if (dec <= 6) ++ return -ENXIO; ++ ++ i2c_w32(0, fdiv_high_cfg); ++ i2c_w32((inc << I2C_FDIV_CFG_INC_OFFSET) | ++ (dec << I2C_FDIV_CFG_DEC_OFFSET), ++ fdiv_cfg); ++ ++ dev_info(priv->dev, "setup clocks (in %d kHz, bus %d kHz, dec=%d)\n", ++ input_clock, priv->i2c_clock, dec); ++ ++ priv->input_clock = input_clock; ++ return 0; ++} ++ ++static int ltq_i2c_hw_init(struct i2c_adapter *adap) ++{ ++ int ret = 0; ++ struct ltq_i2c *priv = i2c_get_adapdata(adap); ++ ++ /* disable bus */ ++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); ++ ++#ifndef DEBUG ++ /* set normal operation clock divider */ ++ i2c_w32(1 << I2C_CLC_RMC_OFFSET, clc); ++#else ++ /* for debugging a higher divider value! */ ++ i2c_w32(0xF0 << I2C_CLC_RMC_OFFSET, clc); ++#endif ++ ++ /* setup clock */ ++ ret = ltq_i2c_hw_set_clock(adap); ++ if (ret != 0) { ++ dev_warn(priv->dev, "invalid clock settings\n"); ++ return ret; ++ } ++ ++ /* configure fifo */ ++ i2c_w32(I2C_FIFO_CFG_TXFC | /* tx fifo as flow controller */ ++ I2C_FIFO_CFG_RXFC | /* rx fifo as flow controller */ ++ I2C_FIFO_CFG_TXFA_TXFA2 | /* tx fifo 4-byte aligned */ ++ I2C_FIFO_CFG_RXFA_RXFA2 | /* rx fifo 4-byte aligned */ ++ I2C_FIFO_CFG_TXBS_TXBS0 | /* tx fifo burst size is 1 word */ ++ I2C_FIFO_CFG_RXBS_RXBS0, /* rx fifo burst size is 1 word */ ++ fifo_cfg); ++ ++ /* configure address */ ++ i2c_w32(I2C_ADDR_CFG_SOPE_EN | /* generate stop when no more data in ++ the fifo */ ++ I2C_ADDR_CFG_SONA_EN | /* generate stop when NA received */ ++ I2C_ADDR_CFG_MnS_EN | /* we are master device */ ++ 0, /* our slave address (not used!) */ ++ addr_cfg); ++ ++ /* enable bus */ ++ i2c_w32_mask(0, I2C_RUN_CTRL_RUN_EN, run_ctrl); ++ ++ return 0; ++} ++ ++static int ltq_i2c_wait_bus_not_busy(struct ltq_i2c *priv) ++{ ++ unsigned long timeout; ++ ++ timeout = jiffies + msecs_to_jiffies(LTQ_I2C_BUSY_TIMEOUT); ++ ++ do { ++ u32 stat = i2c_r32(bus_stat); ++ ++ if ((stat & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_FREE) ++ return 0; ++ ++ cond_resched(); ++ } while (!time_after_eq(jiffies, timeout)); ++ ++ dev_err(priv->dev, "timeout waiting for bus ready\n"); ++ return -ETIMEDOUT; ++} ++ ++static void ltq_i2c_tx(struct ltq_i2c *priv, int last) ++{ ++ if (priv->msg_buf_len && priv->msg_buf) { ++ i2c_w32(*priv->msg_buf, txd); ++ ++ if (--priv->msg_buf_len) ++ priv->msg_buf++; ++ else ++ priv->msg_buf = NULL; ++ } else { ++ last = 1; ++ } ++ ++ if (last) ++ disable_burst_irq(priv); ++} ++ ++static void ltq_i2c_rx(struct ltq_i2c *priv, int last) ++{ ++ u32 fifo_stat, timeout; ++ if (priv->msg_buf_len && priv->msg_buf) { ++ timeout = 5000000; ++ do { ++ fifo_stat = i2c_r32(ffs_stat); ++ } while (!fifo_stat && --timeout); ++ if (!timeout) { ++ last = 1; ++ pr_debug("\nrx timeout\n"); ++ goto err; ++ } ++ while (fifo_stat) { ++ *priv->msg_buf = i2c_r32(rxd); ++ if (--priv->msg_buf_len) { ++ priv->msg_buf++; ++ } else { ++ priv->msg_buf = NULL; ++ last = 1; ++ break; ++ } ++ /* ++ * do not read more than burst size, otherwise no "last ++ * burst" is generated and the transaction is blocked! ++ */ ++ fifo_stat = 0; ++ } ++ } else { ++ last = 1; ++ } ++err: ++ if (last) { ++ disable_burst_irq(priv); ++ ++ if (priv->status == STATUS_READ_END) { ++ /* ++ * do the STATUS_STOP and complete() here, as sometimes ++ * the tx_end is already seen before this is finished ++ */ ++ priv->status = STATUS_STOP; ++ complete(&priv->cmd_complete); ++ } else { ++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); ++ priv->status = STATUS_READ_END; ++ } ++ } ++} ++ ++static void ltq_i2c_xfer_init(struct ltq_i2c *priv) ++{ ++ /* enable interrupts */ ++ i2c_w32(LTQ_I2C_IMSC_DEFAULT_MASK, imsc); ++ ++ /* trigger transfer of first msg */ ++ ltq_i2c_set_tx_len(priv); ++} ++ ++static void dump_msgs(struct i2c_msg msgs[], int num, int rx) ++{ ++#if defined(DEBUG) ++ int i, j; ++ pr_debug("Messages %d %s\n", num, rx ? "out" : "in"); ++ for (i = 0; i < num; i++) { ++ pr_debug("%2d %cX Msg(%d) addr=0x%X: ", i, ++ (msgs[i].flags & I2C_M_RD) ? 'R' : 'T', ++ msgs[i].len, msgs[i].addr); ++ if (!(msgs[i].flags & I2C_M_RD) || rx) { ++ for (j = 0; j < msgs[i].len; j++) ++ pr_debug("%02X ", msgs[i].buf[j]); ++ } ++ pr_debug("\n"); ++ } ++#endif ++} ++ ++static void ltq_i2c_release_bus(struct ltq_i2c *priv) ++{ ++ if ((i2c_r32(bus_stat) & I2C_BUS_STAT_BS_MASK) == I2C_BUS_STAT_BS_BM) ++ i2c_w32(I2C_ENDD_CTRL_SETEND, endd_ctrl); ++} ++ ++static int ltq_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], ++ int num) ++{ ++ struct ltq_i2c *priv = i2c_get_adapdata(adap); ++ int ret; ++ ++ dev_dbg(priv->dev, "xfer %u messages\n", num); ++ dump_msgs(msgs, num, 0); ++ ++ mutex_lock(&priv->mutex); ++ ++ init_completion(&priv->cmd_complete); ++ priv->current_msg = msgs; ++ priv->msgs_num = num; ++ priv->msg_err = 0; ++ priv->status = STATUS_IDLE; ++ ++ /* wait for the bus to become ready */ ++ ret = ltq_i2c_wait_bus_not_busy(priv); ++ if (ret) ++ goto done; ++ ++ while (priv->msgs_num) { ++ /* start the transfers */ ++ ltq_i2c_xfer_init(priv); ++ ++ /* wait for transfers to complete */ ++ ret = wait_for_completion_interruptible_timeout( ++ &priv->cmd_complete, LTQ_I2C_XFER_TIMEOUT); ++ if (ret == 0) { ++ dev_err(priv->dev, "controller timed out\n"); ++ ltq_i2c_hw_init(adap); ++ ret = -ETIMEDOUT; ++ goto done; ++ } else if (ret < 0) ++ goto done; ++ ++ if (priv->msg_err) { ++ if (priv->msg_err & LTQ_I2C_NACK) ++ ret = -ENXIO; ++ else ++ ret = -EREMOTEIO; ++ goto done; ++ } ++ if (--priv->msgs_num) ++ priv->current_msg++; ++ } ++ /* no error? */ ++ ret = num; ++ ++done: ++ ltq_i2c_release_bus(priv); ++ ++ mutex_unlock(&priv->mutex); ++ ++ if (ret >= 0) ++ dump_msgs(msgs, num, 1); ++ ++ pr_debug("XFER ret %d\n", ret); ++ return ret; ++} ++ ++static irqreturn_t ltq_i2c_isr_burst(int irq, void *dev_id) ++{ ++ struct ltq_i2c *priv = dev_id; ++ struct i2c_msg *msg = priv->current_msg; ++ int last = (irq == priv->irq_lb); ++ ++ if (last) ++ pr_debug("LB "); ++ else ++ pr_debug("B "); ++ ++ if (msg->flags & I2C_M_RD) { ++ switch (priv->status) { ++ case STATUS_ADDR: ++ pr_debug("X"); ++ prepare_msg_send_addr(priv); ++ disable_burst_irq(priv); ++ break; ++ case STATUS_READ: ++ case STATUS_READ_END: ++ pr_debug("R"); ++ ltq_i2c_rx(priv, last); ++ break; ++ default: ++ disable_burst_irq(priv); ++ pr_warn("Status R %d\n", priv->status); ++ break; ++ } ++ } else { ++ switch (priv->status) { ++ case STATUS_ADDR: ++ pr_debug("x"); ++ prepare_msg_send_addr(priv); ++ break; ++ case STATUS_WRITE: ++ pr_debug("w"); ++ ltq_i2c_tx(priv, last); ++ break; ++ default: ++ disable_burst_irq(priv); ++ pr_warn("Status W %d\n", priv->status); ++ break; ++ } ++ } ++ ++ i2c_w32(I2C_ICR_BREQ_INT_CLR | I2C_ICR_LBREQ_INT_CLR, icr); ++ return IRQ_HANDLED; ++} ++ ++static void ltq_i2c_isr_prot(struct ltq_i2c *priv) ++{ ++ u32 i_pro = i2c_r32(p_irqss); ++ ++ pr_debug("i2c-p"); ++ ++ /* not acknowledge */ ++ if (i_pro & I2C_P_IRQSS_NACK) { ++ priv->msg_err |= LTQ_I2C_NACK; ++ pr_debug(" nack"); ++ } ++ ++ /* arbitration lost */ ++ if (i_pro & I2C_P_IRQSS_AL) { ++ priv->msg_err |= LTQ_I2C_ARB_LOST; ++ pr_debug(" arb-lost"); ++ } ++ /* tx -> rx switch */ ++ if (i_pro & I2C_P_IRQSS_RX) ++ pr_debug(" rx"); ++ ++ /* tx end */ ++ if (i_pro & I2C_P_IRQSS_TX_END) ++ pr_debug(" txend"); ++ pr_debug("\n"); ++ ++ if (!priv->msg_err) { ++ /* tx -> rx switch */ ++ if (i_pro & I2C_P_IRQSS_RX) { ++ priv->status = STATUS_READ; ++ enable_burst_irq(priv); ++ } ++ if (i_pro & I2C_P_IRQSS_TX_END) { ++ if (priv->status == STATUS_READ) ++ priv->status = STATUS_READ_END; ++ else { ++ disable_burst_irq(priv); ++ priv->status = STATUS_STOP; ++ } ++ } ++ } ++ ++ i2c_w32(i_pro, p_irqsc); ++} ++ ++static irqreturn_t ltq_i2c_isr(int irq, void *dev_id) ++{ ++ u32 i_raw, i_err = 0; ++ struct ltq_i2c *priv = dev_id; ++ ++ i_raw = i2c_r32(mis); ++ pr_debug("i_raw 0x%08X\n", i_raw); ++ ++ /* error interrupt */ ++ if (i_raw & I2C_RIS_I2C_ERR_INT_INTOCC) { ++ i_err = i2c_r32(err_irqss); ++ pr_debug("i_err 0x%08X bus_stat 0x%04X\n", ++ i_err, i2c_r32(bus_stat)); ++ ++ /* tx fifo overflow (8) */ ++ if (i_err & I2C_ERR_IRQSS_TXF_OFL) ++ priv->msg_err |= LTQ_I2C_TX_OFL; ++ ++ /* tx fifo underflow (4) */ ++ if (i_err & I2C_ERR_IRQSS_TXF_UFL) ++ priv->msg_err |= LTQ_I2C_TX_UFL; ++ ++ /* rx fifo overflow (2) */ ++ if (i_err & I2C_ERR_IRQSS_RXF_OFL) ++ priv->msg_err |= LTQ_I2C_RX_OFL; ++ ++ /* rx fifo underflow (1) */ ++ if (i_err & I2C_ERR_IRQSS_RXF_UFL) ++ priv->msg_err |= LTQ_I2C_RX_UFL; ++ ++ i2c_w32(i_err, err_irqsc); ++ } ++ ++ /* protocol interrupt */ ++ if (i_raw & I2C_RIS_I2C_P_INT_INTOCC) ++ ltq_i2c_isr_prot(priv); ++ ++ if ((priv->msg_err) || (priv->status == STATUS_STOP)) ++ complete(&priv->cmd_complete); ++ ++ return IRQ_HANDLED; ++} ++ ++static u32 ltq_i2c_functionality(struct i2c_adapter *adap) ++{ ++ return I2C_FUNC_I2C | ++ I2C_FUNC_10BIT_ADDR | ++ I2C_FUNC_SMBUS_EMUL; ++} ++ ++static struct i2c_algorithm ltq_i2c_algorithm = { ++ .master_xfer = ltq_i2c_xfer, ++ .functionality = ltq_i2c_functionality, ++}; ++ ++static int ltq_i2c_probe(struct platform_device *pdev) ++{ ++ struct device_node *node = pdev->dev.of_node; ++ struct ltq_i2c *priv; ++ struct i2c_adapter *adap; ++ struct resource *mmres, irqres[4]; ++ int ret = 0; ++ ++ dev_dbg(&pdev->dev, "probing\n"); ++ ++ mmres = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ret = of_irq_to_resource_table(node, irqres, 4); ++ if (!mmres || (ret != 4)) { ++ dev_err(&pdev->dev, "no resources\n"); ++ return -ENODEV; ++ } ++ ++ /* allocate private data */ ++ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); ++ if (!priv) { ++ dev_err(&pdev->dev, "can't allocate private data\n"); ++ return -ENOMEM; ++ } ++ ++ adap = &priv->adap; ++ i2c_set_adapdata(adap, priv); ++ adap->owner = THIS_MODULE; ++ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; ++ strlcpy(adap->name, DRV_NAME "-adapter", sizeof(adap->name)); ++ adap->algo = <q_i2c_algorithm; ++ adap->dev.parent = &pdev->dev; ++ adap->dev.of_node = pdev->dev.of_node; ++ ++ if (of_property_read_u32(node, "clock-frequency", &priv->i2c_clock)) { ++ dev_warn(&pdev->dev, "No I2C speed selected, using 100kHz\n"); ++ priv->i2c_clock = 100000; ++ } ++ ++ init_completion(&priv->cmd_complete); ++ mutex_init(&priv->mutex); ++ ++ priv->membase = devm_ioremap_resource(&pdev->dev, mmres); ++ if (IS_ERR(priv->membase)) ++ return PTR_ERR(priv->membase); ++ ++ priv->dev = &pdev->dev; ++ priv->irq_lb = irqres[0].start; ++ ++ ret = devm_request_irq(&pdev->dev, irqres[0].start, ltq_i2c_isr_burst, ++ 0x0, "i2c lb", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get last burst IRQ %d\n", ++ irqres[0].start); ++ return -ENODEV; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, irqres[1].start, ltq_i2c_isr_burst, ++ 0x0, "i2c b", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get burst IRQ %d\n", ++ irqres[1].start); ++ return -ENODEV; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, irqres[2].start, ltq_i2c_isr, ++ 0x0, "i2c err", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get error IRQ %d\n", ++ irqres[2].start); ++ return -ENODEV; ++ } ++ ++ ret = devm_request_irq(&pdev->dev, irqres[3].start, ltq_i2c_isr, ++ 0x0, "i2c p", priv); ++ if (ret) { ++ dev_err(&pdev->dev, "can't get protocol IRQ %d\n", ++ irqres[3].start); ++ return -ENODEV; ++ } ++ ++ dev_dbg(&pdev->dev, "mapped io-space to %p\n", priv->membase); ++ dev_dbg(&pdev->dev, "use IRQs %d, %d, %d, %d\n", irqres[0].start, ++ irqres[1].start, irqres[2].start, irqres[3].start); ++ ++ priv->clk_gate = devm_clk_get(&pdev->dev, NULL); ++ if (IS_ERR(priv->clk_gate)) { ++ dev_err(&pdev->dev, "failed to get i2c clk\n"); ++ return -ENOENT; ++ } ++ ++ /* this is a static clock, which has no refcounting */ ++ priv->clk_input = clk_get_fpi(); ++ if (IS_ERR(priv->clk_input)) { ++ dev_err(&pdev->dev, "failed to get fpi clk\n"); ++ return -ENOENT; ++ } ++ ++ clk_activate(priv->clk_gate); ++ ++ /* add our adapter to the i2c stack */ ++ ret = i2c_add_numbered_adapter(adap); ++ if (ret) { ++ dev_err(&pdev->dev, "can't register I2C adapter\n"); ++ goto out; ++ } ++ ++ platform_set_drvdata(pdev, priv); ++ i2c_set_adapdata(adap, priv); ++ ++ /* print module version information */ ++ dev_dbg(&pdev->dev, "module id=%u revision=%u\n", ++ (i2c_r32(id) & I2C_ID_ID_MASK) >> I2C_ID_ID_OFFSET, ++ (i2c_r32(id) & I2C_ID_REV_MASK) >> I2C_ID_REV_OFFSET); ++ ++ /* initialize HW */ ++ ret = ltq_i2c_hw_init(adap); ++ if (ret) { ++ dev_err(&pdev->dev, "can't configure adapter\n"); ++ i2c_del_adapter(adap); ++ platform_set_drvdata(pdev, NULL); ++ goto out; ++ } else { ++ dev_info(&pdev->dev, "version %s\n", DRV_VERSION); ++ } ++ ++out: ++ /* if init failed, we need to deactivate the clock gate */ ++ if (ret) ++ clk_deactivate(priv->clk_gate); ++ ++ return ret; ++} ++ ++static int ltq_i2c_remove(struct platform_device *pdev) ++{ ++ struct ltq_i2c *priv = platform_get_drvdata(pdev); ++ ++ /* disable bus */ ++ i2c_w32_mask(I2C_RUN_CTRL_RUN_EN, 0, run_ctrl); ++ ++ /* power down the core */ ++ clk_deactivate(priv->clk_gate); ++ ++ /* remove driver */ ++ i2c_del_adapter(&priv->adap); ++ kfree(priv); ++ ++ dev_dbg(&pdev->dev, "removed\n"); ++ platform_set_drvdata(pdev, NULL); ++ ++ return 0; ++} ++static const struct of_device_id ltq_i2c_match[] = { ++ { .compatible = "lantiq,lantiq-i2c" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ltq_i2c_match); ++ ++static struct platform_driver ltq_i2c_driver = { ++ .probe = ltq_i2c_probe, ++ .remove = ltq_i2c_remove, ++ .driver = { ++ .name = DRV_NAME, ++ .owner = THIS_MODULE, ++ .of_match_table = ltq_i2c_match, ++ }, ++}; ++ ++module_platform_driver(ltq_i2c_driver); ++ ++MODULE_DESCRIPTION("Lantiq I2C bus adapter"); ++MODULE_AUTHOR("Thomas Langer <thomas.langer@lantiq.com>"); ++MODULE_ALIAS("platform:" DRV_NAME); ++MODULE_LICENSE("GPL"); ++MODULE_VERSION(DRV_VERSION); +--- /dev/null ++++ b/drivers/i2c/busses/i2c-lantiq.h +@@ -0,0 +1,234 @@ ++#ifndef I2C_LANTIQ_H ++#define I2C_LANTIQ_H ++ ++/* I2C register structure */ ++struct lantiq_reg_i2c { ++ /* I2C Kernel Clock Control Register */ ++ unsigned int clc; /* 0x00000000 */ ++ /* Reserved */ ++ unsigned int res_0; /* 0x00000004 */ ++ /* I2C Identification Register */ ++ unsigned int id; /* 0x00000008 */ ++ /* Reserved */ ++ unsigned int res_1; /* 0x0000000C */ ++ /* ++ * I2C RUN Control Register ++ * This register enables and disables the I2C peripheral. Before ++ * enabling, the I2C has to be configured properly. After enabling ++ * no configuration is possible ++ */ ++ unsigned int run_ctrl; /* 0x00000010 */ ++ /* ++ * I2C End Data Control Register ++ * This register is used to either turn around the data transmission ++ * direction or to address another slave without sending a stop ++ * condition. Also the software can stop the slave-transmitter by ++ * sending a not-accolade when working as master-receiver or even ++ * stop data transmission immediately when operating as ++ * master-transmitter. The writing to the bits of this control ++ * register is only effective when in MASTER RECEIVES BYTES, MASTER ++ * TRANSMITS BYTES, MASTER RESTART or SLAVE RECEIVE BYTES state ++ */ ++ unsigned int endd_ctrl; /* 0x00000014 */ ++ /* ++ * I2C Fractional Divider Configuration Register ++ * These register is used to program the fractional divider of the I2C ++ * bus. Before the peripheral is switched on by setting the RUN-bit the ++ * two (fixed) values for the two operating frequencies are programmed ++ * into these (configuration) registers. The Register FDIV_HIGH_CFG has ++ * the same layout as I2C_FDIV_CFG. ++ */ ++ unsigned int fdiv_cfg; /* 0x00000018 */ ++ /* ++ * I2C Fractional Divider (highspeed mode) Configuration Register ++ * These register is used to program the fractional divider of the I2C ++ * bus. Before the peripheral is switched on by setting the RUN-bit the ++ * two (fixed) values for the two operating frequencies are programmed ++ * into these (configuration) registers. The Register FDIV_CFG has the ++ * same layout as I2C_FDIV_CFG. ++ */ ++ unsigned int fdiv_high_cfg; /* 0x0000001C */ ++ /* I2C Address Configuration Register */ ++ unsigned int addr_cfg; /* 0x00000020 */ ++ /* I2C Bus Status Register ++ * This register gives a status information of the I2C. This additional ++ * information can be used by the software to start proper actions. ++ */ ++ unsigned int bus_stat; /* 0x00000024 */ ++ /* I2C FIFO Configuration Register */ ++ unsigned int fifo_cfg; /* 0x00000028 */ ++ /* I2C Maximum Received Packet Size Register */ ++ unsigned int mrps_ctrl; /* 0x0000002C */ ++ /* I2C Received Packet Size Status Register */ ++ unsigned int rps_stat; /* 0x00000030 */ ++ /* I2C Transmit Packet Size Register */ ++ unsigned int tps_ctrl; /* 0x00000034 */ ++ /* I2C Filled FIFO Stages Status Register */ ++ unsigned int ffs_stat; /* 0x00000038 */ ++ /* Reserved */ ++ unsigned int res_2; /* 0x0000003C */ ++ /* I2C Timing Configuration Register */ ++ unsigned int tim_cfg; /* 0x00000040 */ ++ /* Reserved */ ++ unsigned int res_3[7]; /* 0x00000044 */ ++ /* I2C Error Interrupt Request Source Mask Register */ ++ unsigned int err_irqsm; /* 0x00000060 */ ++ /* I2C Error Interrupt Request Source Status Register */ ++ unsigned int err_irqss; /* 0x00000064 */ ++ /* I2C Error Interrupt Request Source Clear Register */ ++ unsigned int err_irqsc; /* 0x00000068 */ ++ /* Reserved */ ++ unsigned int res_4; /* 0x0000006C */ ++ /* I2C Protocol Interrupt Request Source Mask Register */ ++ unsigned int p_irqsm; /* 0x00000070 */ ++ /* I2C Protocol Interrupt Request Source Status Register */ ++ unsigned int p_irqss; /* 0x00000074 */ ++ /* I2C Protocol Interrupt Request Source Clear Register */ ++ unsigned int p_irqsc; /* 0x00000078 */ ++ /* Reserved */ ++ unsigned int res_5; /* 0x0000007C */ ++ /* I2C Raw Interrupt Status Register */ ++ unsigned int ris; /* 0x00000080 */ ++ /* I2C Interrupt Mask Control Register */ ++ unsigned int imsc; /* 0x00000084 */ ++ /* I2C Masked Interrupt Status Register */ ++ unsigned int mis; /* 0x00000088 */ ++ /* I2C Interrupt Clear Register */ ++ unsigned int icr; /* 0x0000008C */ ++ /* I2C Interrupt Set Register */ ++ unsigned int isr; /* 0x00000090 */ ++ /* I2C DMA Enable Register */ ++ unsigned int dmae; /* 0x00000094 */ ++ /* Reserved */ ++ unsigned int res_6[8154]; /* 0x00000098 */ ++ /* I2C Transmit Data Register */ ++ unsigned int txd; /* 0x00008000 */ ++ /* Reserved */ ++ unsigned int res_7[4095]; /* 0x00008004 */ ++ /* I2C Receive Data Register */ ++ unsigned int rxd; /* 0x0000C000 */ ++ /* Reserved */ ++ unsigned int res_8[4095]; /* 0x0000C004 */ ++}; ++ ++/* ++ * Clock Divider for Normal Run Mode ++ * Max 8-bit divider value. IF RMC is 0 the module is disabled. Note: As long ++ * as the new divider value RMC is not valid, the register returns 0x0000 00xx ++ * on reading. ++ */ ++#define I2C_CLC_RMC_MASK 0x0000FF00 ++/* field offset */ ++#define I2C_CLC_RMC_OFFSET 8 ++ ++/* Fields of "I2C Identification Register" */ ++/* Module ID */ ++#define I2C_ID_ID_MASK 0x0000FF00 ++/* field offset */ ++#define I2C_ID_ID_OFFSET 8 ++/* Revision */ ++#define I2C_ID_REV_MASK 0x000000FF ++/* field offset */ ++#define I2C_ID_REV_OFFSET 0 ++ ++/* Fields of "I2C Interrupt Mask Control Register" */ ++/* Enable */ ++#define I2C_IMSC_BREQ_INT_EN 0x00000008 ++/* Enable */ ++#define I2C_IMSC_LBREQ_INT_EN 0x00000004 ++ ++/* Fields of "I2C Fractional Divider Configuration Register" */ ++/* field offset */ ++#define I2C_FDIV_CFG_INC_OFFSET 16 ++ ++/* Fields of "I2C Interrupt Mask Control Register" */ ++/* Enable */ ++#define I2C_IMSC_I2C_P_INT_EN 0x00000020 ++/* Enable */ ++#define I2C_IMSC_I2C_ERR_INT_EN 0x00000010 ++ ++/* Fields of "I2C Error Interrupt Request Source Status Register" */ ++/* TXF_OFL */ ++#define I2C_ERR_IRQSS_TXF_OFL 0x00000008 ++/* TXF_UFL */ ++#define I2C_ERR_IRQSS_TXF_UFL 0x00000004 ++/* RXF_OFL */ ++#define I2C_ERR_IRQSS_RXF_OFL 0x00000002 ++/* RXF_UFL */ ++#define I2C_ERR_IRQSS_RXF_UFL 0x00000001 ++ ++/* Fields of "I2C Raw Interrupt Status Register" */ ++/* Read: Interrupt occurred. */ ++#define I2C_RIS_I2C_ERR_INT_INTOCC 0x00000010 ++/* Read: Interrupt occurred. */ ++#define I2C_RIS_I2C_P_INT_INTOCC 0x00000020 ++ ++/* Fields of "I2C FIFO Configuration Register" */ ++/* TX FIFO Flow Control */ ++#define I2C_FIFO_CFG_TXFC 0x00020000 ++/* RX FIFO Flow Control */ ++#define I2C_FIFO_CFG_RXFC 0x00010000 ++/* Word aligned (character alignment of four characters) */ ++#define I2C_FIFO_CFG_TXFA_TXFA2 0x00002000 ++/* Word aligned (character alignment of four characters) */ ++#define I2C_FIFO_CFG_RXFA_RXFA2 0x00000200 ++/* 1 word */ ++#define I2C_FIFO_CFG_TXBS_TXBS0 0x00000000 ++ ++/* Fields of "I2C FIFO Configuration Register" */ ++/* 1 word */ ++#define I2C_FIFO_CFG_RXBS_RXBS0 0x00000000 ++/* Stop on Packet End Enable */ ++#define I2C_ADDR_CFG_SOPE_EN 0x00200000 ++/* Stop on Not Acknowledge Enable */ ++#define I2C_ADDR_CFG_SONA_EN 0x00100000 ++/* Enable */ ++#define I2C_ADDR_CFG_MnS_EN 0x00080000 ++ ++/* Fields of "I2C Interrupt Clear Register" */ ++/* Clear */ ++#define I2C_ICR_BREQ_INT_CLR 0x00000008 ++/* Clear */ ++#define I2C_ICR_LBREQ_INT_CLR 0x00000004 ++ ++/* Fields of "I2C Fractional Divider Configuration Register" */ ++/* field offset */ ++#define I2C_FDIV_CFG_DEC_OFFSET 0 ++ ++/* Fields of "I2C Bus Status Register" */ ++/* Bus Status */ ++#define I2C_BUS_STAT_BS_MASK 0x00000003 ++/* Read from I2C Bus. */ ++#define I2C_BUS_STAT_RNW_READ 0x00000004 ++/* I2C Bus is free. */ ++#define I2C_BUS_STAT_BS_FREE 0x00000000 ++/* ++ * The device is working as master and has claimed the control on the ++ * I2C-bus (busy master). ++ */ ++#define I2C_BUS_STAT_BS_BM 0x00000002 ++ ++/* Fields of "I2C RUN Control Register" */ ++/* Enable */ ++#define I2C_RUN_CTRL_RUN_EN 0x00000001 ++ ++/* Fields of "I2C End Data Control Register" */ ++/* ++ * Set End of Transmission ++ * Note:Do not write '1' to this bit when bus is free. This will cause an ++ * abort after the first byte when a new transfer is started. ++ */ ++#define I2C_ENDD_CTRL_SETEND 0x00000002 ++ ++/* Fields of "I2C Protocol Interrupt Request Source Status Register" */ ++/* NACK */ ++#define I2C_P_IRQSS_NACK 0x00000010 ++/* AL */ ++#define I2C_P_IRQSS_AL 0x00000008 ++/* RX */ ++#define I2C_P_IRQSS_RX 0x00000040 ++/* TX_END */ ++#define I2C_P_IRQSS_TX_END 0x00000020 ++ ++ ++#endif /* I2C_LANTIQ_H */ diff --git a/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch b/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch new file mode 100644 index 0000000000..a5ecd94c4a --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0035-owrt-lantiq-wifi-and-ethernet-eeprom-handling.patch @@ -0,0 +1,219 @@ +From f8c5db89e793a4bc6c1e87bd7b3a5cec16b75bc3 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Wed, 10 Sep 2014 22:42:14 +0200 +Subject: [PATCH 35/36] owrt: lantiq: wifi and ethernet eeprom handling + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + .../mips/include/asm/mach-lantiq/xway/lantiq_soc.h | 3 + + arch/mips/lantiq/xway/Makefile | 3 + + arch/mips/lantiq/xway/ath5k_eep.c | 136 +++++++++++++++++++++ + arch/mips/lantiq/xway/eth_mac.c | 25 ++++ + drivers/net/ethernet/lantiq_etop.c | 6 +- + 5 files changed, 172 insertions(+), 1 deletion(-) + create mode 100644 arch/mips/lantiq/xway/ath5k_eep.c + create mode 100644 arch/mips/lantiq/xway/eth_mac.c + +--- a/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h ++++ b/arch/mips/include/asm/mach-lantiq/xway/lantiq_soc.h +@@ -104,5 +104,8 @@ int xrx200_gphy_boot(struct device *dev, + extern void ltq_pmu_enable(unsigned int module); + extern void ltq_pmu_disable(unsigned int module); + ++/* allow the ethernet driver to load a flash mapped mac addr */ ++const u8* ltq_get_eth_mac(void); ++ + #endif /* CONFIG_SOC_TYPE_XWAY */ + #endif /* _LTQ_XWAY_H__ */ +--- a/arch/mips/lantiq/xway/Makefile ++++ b/arch/mips/lantiq/xway/Makefile +@@ -8,4 +8,7 @@ endif + + obj-y += vmmc.o + ++obj-y += eth_mac.o ++obj-$(CONFIG_PCI) += ath5k_eep.o ++ + obj-$(CONFIG_XRX200_PHY_FW) += xrx200_phy_fw.o +--- /dev/null ++++ b/arch/mips/lantiq/xway/ath5k_eep.c +@@ -0,0 +1,136 @@ ++/* ++ * Copyright (C) 2011 Luca Olivetti <luca@ventoso.org> ++ * Copyright (C) 2011 John Crispin <blogic@openwrt.org> ++ * Copyright (C) 2011 Andrej Vlašić <andrej.vlasic0@gmail.com> ++ * Copyright (C) 2013 Álvaro Fernández Rojas <noltari@gmail.com> ++ * Copyright (C) 2013 Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us> ++ * Copyright (C) 2015 Vittorio Gambaletta <openwrt@vittgam.net> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/platform_device.h> ++#include <linux/etherdevice.h> ++#include <linux/ath5k_platform.h> ++#include <linux/pci.h> ++#include <linux/err.h> ++#include <linux/mtd/mtd.h> ++#include <lantiq_soc.h> ++ ++extern int (*ltq_pci_plat_dev_init)(struct pci_dev *dev); ++struct ath5k_platform_data ath5k_pdata; ++static u8 athxk_eeprom_mac[6]; ++ ++static int ath5k_pci_plat_dev_init(struct pci_dev *dev) ++{ ++ dev->dev.platform_data = &ath5k_pdata; ++ return 0; ++} ++ ++static int ath5k_eep_load; ++int __init of_ath5k_eeprom_probe(struct platform_device *pdev) ++{ ++ struct device_node *np = pdev->dev.of_node, *mtd_np = NULL; ++ int mac_offset; ++ u32 mac_inc = 0; ++ int i; ++ struct mtd_info *the_mtd; ++ size_t flash_readlen; ++ const __be32 *list; ++ const char *part; ++ phandle phandle; ++ ++ list = of_get_property(np, "ath,eep-flash", &i); ++ if (!list || (i != (2 * sizeof(*list)))) ++ return -ENODEV; ++ ++ phandle = be32_to_cpup(list++); ++ if (phandle) ++ mtd_np = of_find_node_by_phandle(phandle); ++ ++ if (!mtd_np) ++ return -ENODEV; ++ ++ part = of_get_property(mtd_np, "label", NULL); ++ if (!part) ++ part = mtd_np->name; ++ ++ the_mtd = get_mtd_device_nm(part); ++ if (IS_ERR(the_mtd)) ++ return -ENODEV; ++ ++ ath5k_pdata.eeprom_data = kmalloc(ATH5K_PLAT_EEP_MAX_WORDS<<1, GFP_KERNEL); ++ ++ i = mtd_read(the_mtd, be32_to_cpup(list), ATH5K_PLAT_EEP_MAX_WORDS << 1, ++ &flash_readlen, (void *) ath5k_pdata.eeprom_data); ++ ++ if (!of_property_read_u32(np, "ath,mac-offset", &mac_offset)) { ++ size_t mac_readlen; ++ mtd_read(the_mtd, mac_offset, 6, &mac_readlen, ++ (void *) athxk_eeprom_mac); ++ } ++ put_mtd_device(the_mtd); ++ ++ if (((ATH5K_PLAT_EEP_MAX_WORDS<<1) != flash_readlen) || i) { ++ dev_err(&pdev->dev, "failed to load eeprom from mtd\n"); ++ return -ENODEV; ++ } ++ ++ if (of_find_property(np, "ath,eep-swap", NULL)) ++ for (i = 0; i < ATH5K_PLAT_EEP_MAX_WORDS; i++) ++ ath5k_pdata.eeprom_data[i] = swab16(ath5k_pdata.eeprom_data[i]); ++ ++ if (!is_valid_ether_addr(athxk_eeprom_mac) && ltq_get_eth_mac()) ++ ether_addr_copy(athxk_eeprom_mac, ltq_get_eth_mac()); ++ ++ if (!is_valid_ether_addr(athxk_eeprom_mac)) { ++ dev_warn(&pdev->dev, "using random mac\n"); ++ random_ether_addr(athxk_eeprom_mac); ++ } ++ ++ if (!of_property_read_u32(np, "ath,mac-increment", &mac_inc)) ++ athxk_eeprom_mac[5] += mac_inc; ++ ++ ath5k_pdata.macaddr = athxk_eeprom_mac; ++ ltq_pci_plat_dev_init = ath5k_pci_plat_dev_init; ++ ++ dev_info(&pdev->dev, "loaded ath5k eeprom\n"); ++ ++ return 0; ++} ++ ++static struct of_device_id ath5k_eeprom_ids[] = { ++ { .compatible = "ath5k,eeprom" }, ++ { } ++}; ++ ++static struct platform_driver ath5k_eeprom_driver = { ++ .driver = { ++ .name = "ath5k,eeprom", ++ .owner = THIS_MODULE, ++ .of_match_table = of_match_ptr(ath5k_eeprom_ids), ++ }, ++}; ++ ++static int __init of_ath5k_eeprom_init(void) ++{ ++ int ret = platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe); ++ ++ if (ret) ++ ath5k_eep_load = 1; ++ ++ return ret; ++} ++ ++static int __init of_ath5k_eeprom_init_late(void) ++{ ++ if (!ath5k_eep_load) ++ return 0; ++ ++ return platform_driver_probe(&ath5k_eeprom_driver, of_ath5k_eeprom_probe); ++} ++late_initcall(of_ath5k_eeprom_init_late); ++subsys_initcall(of_ath5k_eeprom_init); +--- /dev/null ++++ b/arch/mips/lantiq/xway/eth_mac.c +@@ -0,0 +1,25 @@ ++/* ++ * Copyright (C) 2012 John Crispin <blogic@openwrt.org> ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ */ ++ ++#include <linux/init.h> ++#include <linux/if_ether.h> ++ ++static u8 eth_mac[6]; ++static int eth_mac_set; ++ ++const u8* ltq_get_eth_mac(void) ++{ ++ return eth_mac; ++} ++ ++static int __init setup_ethaddr(char *str) ++{ ++ eth_mac_set = mac_pton(str, eth_mac); ++ return !eth_mac_set; ++} ++early_param("ethaddr", setup_ethaddr); +--- a/drivers/net/ethernet/lantiq_etop.c ++++ b/drivers/net/ethernet/lantiq_etop.c +@@ -794,7 +794,11 @@ ltq_etop_init(struct net_device *dev) + if (err) + goto err_hw; + +- memcpy(&mac, &priv->pldata->mac, sizeof(struct sockaddr)); ++ memcpy(&mac.sa_data, ltq_get_eth_mac(), ETH_ALEN); ++ ++ if (priv->mac && !is_valid_ether_addr(mac.sa_data)) ++ memcpy(&mac.sa_data, priv->mac, ETH_ALEN); ++ + if (!is_valid_ether_addr(mac.sa_data)) { + pr_warn("etop: invalid MAC, using random\n"); + eth_random_addr(mac.sa_data); diff --git a/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch b/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch new file mode 100644 index 0000000000..fc6312310e --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0040-USB-DWC2-enable-usb-power-gpio.patch @@ -0,0 +1,35 @@ +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -42,6 +42,7 @@ + #include <linux/dma-mapping.h> + #include <linux/of_device.h> + #include <linux/mutex.h> ++#include <linux/of_gpio.h> + #include <linux/platform_device.h> + #include <linux/phy/phy.h> + #include <linux/platform_data/s3c-hsotg.h> +@@ -544,6 +545,7 @@ static int dwc2_driver_probe(struct plat + struct dwc2_hsotg *hsotg; + struct resource *res; + int retval; ++ int gpio_count; + + match = of_match_device(dwc2_of_match_table, &dev->dev); + if (match && match->data) { +@@ -562,6 +564,16 @@ static int dwc2_driver_probe(struct plat + defparams.dma_desc_fs_enable = 0; + } + ++ gpio_count = of_gpio_count(dev->dev.of_node); ++ while (gpio_count > 0) { ++ enum of_gpio_flags flags; ++ int gpio = of_get_gpio_flags(dev->dev.of_node, --gpio_count, &flags); ++ if (gpio_request(gpio, "usb")) ++ continue; ++ dev_info(&dev->dev, "requested GPIO %d\n", gpio); ++ gpio_direction_output(gpio, (flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1)); ++ } ++ + hsotg = devm_kzalloc(&dev->dev, sizeof(*hsotg), GFP_KERNEL); + if (!hsotg) + return -ENOMEM; diff --git a/target/linux/lantiq/patches-4.14/0042-arch-mips-increase-io_space_limit.patch b/target/linux/lantiq/patches-4.14/0042-arch-mips-increase-io_space_limit.patch new file mode 100644 index 0000000000..14b417e690 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0042-arch-mips-increase-io_space_limit.patch @@ -0,0 +1,23 @@ +From 9807eb80a1b3bad7a4a89aa6566497bb1cadd6ef Mon Sep 17 00:00:00 2001 +From: John Crispin <john@phrozen.org> +Date: Fri, 3 Jun 2016 13:12:20 +0200 +Subject: [PATCH] arch: mips: increase io_space_limit + +this value comes from x86 and breaks some pci devices + +Signed-off-by: John Crispin <john@phrozen.org> +--- + arch/mips/include/asm/io.h | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/arch/mips/include/asm/io.h ++++ b/arch/mips/include/asm/io.h +@@ -50,7 +50,7 @@ + + /* ioswab[bwlq], __mem_ioswab[bwlq] are defined in mangle-port.h */ + +-#define IO_SPACE_LIMIT 0xffff ++#define IO_SPACE_LIMIT 0xffffffff + + /* + * On MIPS I/O ports are memory mapped, so we access them using normal diff --git a/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch b/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch new file mode 100644 index 0000000000..a2fc9d955d --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0044-pinctrl-xway-fix-copy-paste-error-in-xrx200_grps.patch @@ -0,0 +1,11 @@ +--- a/drivers/pinctrl/pinctrl-xway.c ++++ b/drivers/pinctrl/pinctrl-xway.c +@@ -1028,7 +1028,7 @@ static const struct ltq_pin_group xrx200 + GRP_MUX("spi_cs5", SPI, xrx200_pins_spi_cs5), + GRP_MUX("spi_cs6", SPI, xrx200_pins_spi_cs6), + GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_rx), +- GRP_MUX("usif uart_rx", USIF, xrx200_pins_usif_uart_tx), ++ GRP_MUX("usif uart_tx", USIF, xrx200_pins_usif_uart_tx), + GRP_MUX("usif uart_rts", USIF, xrx200_pins_usif_uart_rts), + GRP_MUX("usif uart_cts", USIF, xrx200_pins_usif_uart_cts), + GRP_MUX("usif uart_dtr", USIF, xrx200_pins_usif_uart_dtr), diff --git a/target/linux/lantiq/patches-4.14/0047-poweroff.patch b/target/linux/lantiq/patches-4.14/0047-poweroff.patch new file mode 100644 index 0000000000..54249bba52 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0047-poweroff.patch @@ -0,0 +1,23 @@ +--- a/arch/mips/lantiq/xway/reset.c ++++ b/arch/mips/lantiq/xway/reset.c +@@ -301,12 +301,6 @@ static void ltq_machine_halt(void) + unreachable(); + } + +-static void ltq_machine_power_off(void) +-{ +- local_irq_disable(); +- unreachable(); +-} +- + static void ltq_usb_init(void) + { + /* Power for USB cores 1 & 2 */ +@@ -379,7 +373,6 @@ static int __init mips_reboot_setup(void + + _machine_restart = ltq_machine_restart; + _machine_halt = ltq_machine_halt; +- pm_power_off = ltq_machine_power_off; + + return 0; + } diff --git a/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch b/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch new file mode 100644 index 0000000000..c0d7afc541 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0050-MIPS-Lantiq-Fix-cascaded-IRQ-setup.patch @@ -0,0 +1,87 @@ +From: Felix Fietkau <nbd@nbd.name> +Date: Thu, 19 Jan 2017 12:14:44 +0100 +Subject: [PATCH] MIPS: Lantiq: Fix cascaded IRQ setup + +With the IRQ stack changes integrated, the XRX200 devices started +emitting a constant stream of kernel messages like this: + +[ 565.415310] Spurious IRQ: CAUSE=0x1100c300 + +This appears to be caused by IP0 firing for some reason without being +handled. Fix this by setting up IP2-6 as a proper chained IRQ handler and +calling do_IRQ for all MIPS CPU interrupts. + +Cc: john@phrozen.org +Cc: stable@vger.kernel.org +Signed-off-by: Felix Fietkau <nbd@nbd.name> +--- + +--- a/arch/mips/lantiq/irq.c ++++ b/arch/mips/lantiq/irq.c +@@ -271,6 +271,11 @@ static void ltq_hw5_irqdispatch(void) + DEFINE_HWx_IRQDISPATCH(5) + #endif + ++static void ltq_hw_irq_handler(struct irq_desc *desc) ++{ ++ ltq_hw_irqdispatch(irq_desc_get_irq(desc) - 2); ++} ++ + #ifdef CONFIG_MIPS_MT_SMP + void __init arch_init_ipiirq(int irq, struct irqaction *action) + { +@@ -315,23 +320,19 @@ static struct irqaction irq_call = { + asmlinkage void plat_irq_dispatch(void) + { + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; +- unsigned int i; ++ int irq; + +- if ((MIPS_CPU_TIMER_IRQ == 7) && (pending & CAUSEF_IP7)) { +- do_IRQ(MIPS_CPU_TIMER_IRQ); +- goto out; +- } else { +- for (i = 0; i < MAX_IM; i++) { +- if (pending & (CAUSEF_IP2 << i)) { +- ltq_hw_irqdispatch(i); +- goto out; +- } +- } ++ if (!pending) { ++ spurious_interrupt(); ++ return; + } +- pr_alert("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status()); + +-out: +- return; ++ pending >>= CAUSEB_IP; ++ while (pending) { ++ irq = fls(pending) - 1; ++ do_IRQ(MIPS_CPU_IRQ_BASE + irq); ++ pending &= ~BIT(irq); ++ } + } + + static int icu_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +@@ -356,11 +357,6 @@ static const struct irq_domain_ops irq_d + .map = icu_map, + }; + +-static struct irqaction cascade = { +- .handler = no_action, +- .name = "cascade", +-}; +- + int __init icu_of_init(struct device_node *node, struct device_node *parent) + { + struct device_node *eiu_node; +@@ -392,7 +388,7 @@ int __init icu_of_init(struct device_nod + mips_cpu_irq_init(); + + for (i = 0; i < MAX_IM; i++) +- setup_irq(i + 2, &cascade); ++ irq_set_chained_handler(i + 2, ltq_hw_irq_handler); + + if (cpu_has_vint) { + pr_info("Setting up vectored interrupts\n"); diff --git a/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch b/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch new file mode 100644 index 0000000000..4d18443943 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0061-USB-DWC2-make-the-lantiq-settings-match-vendor-drive.patch @@ -0,0 +1,130 @@ +From de2cad82c4d0872066f83ce59462603852b47f03 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Fri, 6 Jan 2017 17:55:24 +0100 +Subject: [PATCH 2/2] usb: dwc2: add support for other Lantiq SoCs + +The size of the internal RAM of the DesignWare USB controller changed +between the different Lantiq SoCs. We have the following sizes: + +Amazon + Danube: 8 KByte +Amazon SE + arx100: 2 KByte +xrx200 + xrx300: 2.5 KByte + +For Danube SoC we do not provide the params and let the driver decide +to use sane defaults, for the Amazon SE and arx100 we use small fifos +and for the xrx200 and xrx300 SCs a little bit bigger periodic fifo. +The auto detection of max_transfer_size and max_packet_count should +work, so remove it. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + drivers/usb/dwc2/platform.c | 46 ++++++++++++++++++++++++++++++++++++++------- + 1 file changed, 39 insertions(+), 7 deletions(-) + +--- a/drivers/usb/dwc2/platform.c ++++ b/drivers/usb/dwc2/platform.c +@@ -151,7 +151,38 @@ static const struct dwc2_core_params par + .hibernation = -1, + }; + +-static const struct dwc2_core_params params_ltq = { ++static const struct dwc2_core_params params_danube = { ++ .otg_cap = 2, /* non-HNP/non-SRP */ ++ .otg_ver = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .dma_desc_fs_enable = -1, ++ .speed = -1, ++ .enable_dynamic_fifo = -1, ++ .en_multiple_tx_fifo = -1, ++ .host_rx_fifo_size = -1, ++ .host_nperio_tx_fifo_size = -1, ++ .host_perio_tx_fifo_size = -1, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .ts_dline = -1, ++ .reload_ctl = -1, ++ .ahbcfg = -1, ++ .uframe_sched = -1, ++ .external_id_pin_ctl = -1, ++ .hibernation = -1, ++}; ++ ++static const struct dwc2_core_params params_ase = { + .otg_cap = 2, /* non-HNP/non-SRP */ + .otg_ver = -1, + .dma_enable = -1, +@@ -163,8 +194,8 @@ static const struct dwc2_core_params par + .host_rx_fifo_size = 288, /* 288 DWORDs */ + .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ + .host_perio_tx_fifo_size = 96, /* 96 DWORDs */ +- .max_transfer_size = 65535, +- .max_packet_count = 511, ++ .max_transfer_size = -1, ++ .max_packet_count = -1, + .host_channels = -1, + .phy_type = -1, + .phy_utmi_width = -1, +@@ -176,8 +207,37 @@ static const struct dwc2_core_params par + .host_ls_low_power_phy_clk = -1, + .ts_dline = -1, + .reload_ctl = -1, +- .ahbcfg = GAHBCFG_HBSTLEN_INCR16 << +- GAHBCFG_HBSTLEN_SHIFT, ++ .ahbcfg = -1, ++ .uframe_sched = -1, ++ .external_id_pin_ctl = -1, ++ .hibernation = -1, ++}; ++ ++static const struct dwc2_core_params params_xrx200 = { ++ .otg_cap = 2, /* non-HNP/non-SRP */ ++ .otg_ver = -1, ++ .dma_enable = -1, ++ .dma_desc_enable = -1, ++ .speed = -1, ++ .enable_dynamic_fifo = -1, ++ .en_multiple_tx_fifo = -1, ++ .host_rx_fifo_size = 288, /* 288 DWORDs */ ++ .host_nperio_tx_fifo_size = 128, /* 128 DWORDs */ ++ .host_perio_tx_fifo_size = 136, /* 136 DWORDs */ ++ .max_transfer_size = -1, ++ .max_packet_count = -1, ++ .host_channels = -1, ++ .phy_type = -1, ++ .phy_utmi_width = -1, ++ .phy_ulpi_ddr = -1, ++ .phy_ulpi_ext_vbus = -1, ++ .i2c_enable = -1, ++ .ulpi_fs_ls = -1, ++ .host_support_fs_ls_low_power = -1, ++ .host_ls_low_power_phy_clk = -1, ++ .ts_dline = -1, ++ .reload_ctl = -1, ++ .ahbcfg = -1, + .uframe_sched = -1, + .external_id_pin_ctl = -1, + .hibernation = -1, +@@ -515,8 +575,11 @@ static const struct of_device_id dwc2_of + { .compatible = "brcm,bcm2835-usb", .data = ¶ms_bcm2835 }, + { .compatible = "hisilicon,hi6220-usb", .data = ¶ms_hi6220 }, + { .compatible = "rockchip,rk3066-usb", .data = ¶ms_rk3066 }, +- { .compatible = "lantiq,arx100-usb", .data = ¶ms_ltq }, +- { .compatible = "lantiq,xrx200-usb", .data = ¶ms_ltq }, ++ { .compatible = "lantiq,danube-usb", .data = ¶ms_danube }, ++ { .compatible = "lantiq,ase-usb", .data = ¶ms_ase }, ++ { .compatible = "lantiq,arx100-usb", .data = ¶ms_ase }, ++ { .compatible = "lantiq,xrx200-usb", .data = ¶ms_xrx200 }, ++ { .compatible = "lantiq,xrx300-usb", .data = ¶ms_xrx200 }, + { .compatible = "snps,dwc2", .data = NULL }, + { .compatible = "samsung,s3c6400-hsotg", .data = NULL}, + { .compatible = "amlogic,meson8b-usb", .data = ¶ms_amlogic }, diff --git a/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch b/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch new file mode 100644 index 0000000000..acc23080f1 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0065-MIPS-lantiq-improve-USB-initialization.patch @@ -0,0 +1,202 @@ +From 14909c4e4e836925668e74fc6e0e85ba0283cbf9 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Fri, 6 Jan 2017 17:40:12 +0100 +Subject: [PATCH 2/2] MIPS: lantiq: improve USB initialization + +This adds code to initialize the USB controller and PHY also on Danube, +Amazon SE and AR10. This code is based on the Vendor driver from +different UGW versions and compared to the hardware documentation. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + arch/mips/lantiq/xway/reset.c | 120 ++++++++++++++++++++++++++++++---------- + arch/mips/lantiq/xway/sysctrl.c | 20 +++++++ + 2 files changed, 110 insertions(+), 30 deletions(-) + +--- a/arch/mips/lantiq/xway/reset.c ++++ b/arch/mips/lantiq/xway/reset.c +@@ -72,6 +72,8 @@ + #define RCU_USBCFG_HDSEL_BIT BIT(11) + #define RCU_USBCFG_HOST_END_BIT BIT(10) + #define RCU_USBCFG_SLV_END_BIT BIT(9) ++#define RCU_USBCFG_SLV_END_BIT_AR9 BIT(17) ++ + + /* USB reset bits */ + #define RCU_USBRESET 0x0010 +@@ -85,6 +87,8 @@ + + #define RCU_CFG1A 0x0038 + #define RCU_CFG1B 0x003C ++#define RCU_CFG1_TX_PEE BIT(0) ++#define RCU_CFG1_DIS_THR_SHIFT 15 /* Disconnect Threshold */ + + /* USB PMU devices */ + #define PMU_AHBM BIT(15) +@@ -306,38 +310,91 @@ static void ltq_usb_init(void) + /* Power for USB cores 1 & 2 */ + ltq_pmu_enable(PMU_AHBM); + ltq_pmu_enable(PMU_USB0); +- ltq_pmu_enable(PMU_USB1); + +- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | BIT(0), RCU_CFG1A); +- ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | BIT(0), RCU_CFG1B); ++ if (of_machine_is_compatible("lantiq,ar10") || ++ of_machine_is_compatible("lantiq,grx390") || ++ of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9")) ++ ltq_pmu_enable(PMU_USB1); ++ ++ if (of_machine_is_compatible("lantiq,vr9") || ++ of_machine_is_compatible("lantiq,ar10")) { ++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1A) | RCU_CFG1_TX_PEE | ++ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1A); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_CFG1B) | RCU_CFG1_TX_PEE | ++ 7 << RCU_CFG1_DIS_THR_SHIFT, RCU_CFG1B); ++ } + + /* Enable USB PHY power for cores 1 & 2 */ + ltq_pmu_enable(PMU_USB0_P); +- ltq_pmu_enable(PMU_USB1_P); ++ if (of_machine_is_compatible("lantiq,ar10") || ++ of_machine_is_compatible("lantiq,grx390") || ++ of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9")) ++ ltq_pmu_enable(PMU_USB1_P); ++ ++ if (of_machine_is_compatible("lantiq,ase") || ++ of_machine_is_compatible("lantiq,danube")) { ++ /* Configure cores to host mode */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB1CFG); ++ ++ /* Select DMA endianness (Host-endian: big-endian) */ ++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); ++ } ++ ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ /* Configure cores to host mode */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB2CFG); ++ ++ /* Select DMA endianness (Host-endian: big-endian) */ ++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT_AR9) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); ++ } ++ ++ if (of_machine_is_compatible("lantiq,vr9") || ++ of_machine_is_compatible("lantiq,ar10")) { ++ /* Configure cores to host mode */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, ++ RCU_USB2CFG); ++ ++ /* Select DMA endianness (Host-endian: big-endian) */ ++ ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); ++ ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) ++ | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); ++ } ++ ++ if (of_machine_is_compatible("lantiq,ar9")) { ++ /* Hard reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) ++ | USBRESET_BIT | BIT(28), RCU_USBRESET); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) ++ & ~(USBRESET_BIT | BIT(28)), RCU_USBRESET); ++ } else { ++ /* Hard reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); ++ } + +- /* Configure cores to host mode */ +- ltq_rcu_w32(ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_HDSEL_BIT, +- RCU_USB1CFG); +- ltq_rcu_w32(ltq_rcu_r32(RCU_USB2CFG) & ~RCU_USBCFG_HDSEL_BIT, +- RCU_USB2CFG); +- +- /* Select DMA endianness (Host-endian: big-endian) */ +- ltq_rcu_w32((ltq_rcu_r32(RCU_USB1CFG) & ~RCU_USBCFG_SLV_END_BIT) +- | RCU_USBCFG_HOST_END_BIT, RCU_USB1CFG); +- ltq_rcu_w32(ltq_rcu_r32((RCU_USB2CFG) & ~RCU_USBCFG_SLV_END_BIT) +- | RCU_USBCFG_HOST_END_BIT, RCU_USB2CFG); +- +- /* Hard reset USB state machines */ +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) | USBRESET_BIT, RCU_USBRESET); +- udelay(50 * 1000); +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET) & ~USBRESET_BIT, RCU_USBRESET); +- +- /* Soft reset USB state machines */ +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) +- | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); +- udelay(50 * 1000); +- ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) +- & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); ++ if (of_machine_is_compatible("lantiq,vr9")) { ++ /* Soft reset USB state machines */ ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) ++ | USB1RESET_BIT | USB2RESET_BIT, RCU_USBRESET2); ++ udelay(50 * 1000); ++ ltq_rcu_w32(ltq_rcu_r32(RCU_USBRESET2) ++ & ~(USB1RESET_BIT | USB2RESET_BIT), RCU_USBRESET2); ++ } + } + + static int __init mips_reboot_setup(void) +@@ -363,8 +420,11 @@ static int __init mips_reboot_setup(void + if (!ltq_rcu_membase) + panic("Failed to remap core memory"); + +- if (of_machine_is_compatible("lantiq,ar9") || +- of_machine_is_compatible("lantiq,vr9")) ++ if (of_machine_is_compatible("lantiq,danube") || ++ of_machine_is_compatible("lantiq,ase") || ++ of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9") || ++ of_machine_is_compatible("lantiq,ar10")) + ltq_usb_init(); + + if (of_machine_is_compatible("lantiq,vr9")) +--- a/arch/mips/lantiq/xway/sysctrl.c ++++ b/arch/mips/lantiq/xway/sysctrl.c +@@ -254,6 +254,25 @@ static void pmu_disable(struct clk *clk) + pr_warn("deactivating PMU module failed!"); + } + ++static void usb_set_clock(void) ++{ ++ unsigned int val = ltq_cgu_r32(ifccr); ++ ++ if (of_machine_is_compatible("lantiq,ar10") || ++ of_machine_is_compatible("lantiq,grx390")) { ++ val &= ~0x03; /* XTAL divided by 3 */ ++ } else if (of_machine_is_compatible("lantiq,ar9") || ++ of_machine_is_compatible("lantiq,vr9")) { ++ /* TODO: this depends on the XTAL frequency */ ++ val |= 0x03; /* XTAL divided by 3 */ ++ } else if (of_machine_is_compatible("lantiq,ase")) { ++ val |= 0x20; /* from XTAL */ ++ } else if (of_machine_is_compatible("lantiq,danube")) { ++ val |= 0x30; /* 12 MHz, generated from 36 MHz */ ++ } ++ ltq_cgu_w32(val, ifccr); ++} ++ + /* the pci enable helper */ + static int pci_enable(struct clk *clk) + { +@@ -608,4 +627,5 @@ void __init ltq_soc_init(void) + + if (of_machine_is_compatible("lantiq,vr9")) + xbar_fpi_burst_disable(); ++ usb_set_clock(); + } diff --git a/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch b/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch new file mode 100644 index 0000000000..da48ae3a18 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0090-spi-lantiq-ssc-add-support-for-Lantiq-SSC-SPI-contro.patch @@ -0,0 +1,1078 @@ +From 941ab0bc001fe24e5f8ce88eed27f2a1b89f3e20 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Tue, 14 Feb 2017 00:31:11 +0100 +Subject: spi: lantiq-ssc: add support for Lantiq SSC SPI controller + +This driver supports the Lantiq SSC SPI controller in master +mode. This controller is found on Intel (former Lantiq) SoCs like +the Danube, Falcon, xRX200, xRX300. + +The hardware uses two hardware FIFOs one for received and one for +transferred bytes. When the driver writes data into the transmit FIFO +the complete word is taken from the FIFO into a shift register. The +data from this shift register is then written to the wire. This driver +uses the interrupts signaling the status of the FIFOs and not the shift +register. It is also possible to use the interrupts for the shift +register, but they will send a signal after every word. When using the +interrupts for the shift register we get a signal when the last word is +written into the shift register and not when it is written to the wire. +After all FIFOs are empty the driver busy waits till the hardware is +not busy any more and returns the transfer status. + +Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +Signed-off-by: Mark Brown <broonie@kernel.org> +--- + .../devicetree/bindings/spi/spi-lantiq-ssc.txt | 29 + + drivers/spi/Kconfig | 8 + + drivers/spi/Makefile | 1 + + drivers/spi/spi-lantiq-ssc.c | 983 +++++++++++++++++++++ + 4 files changed, 1021 insertions(+) + create mode 100644 Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt + create mode 100644 drivers/spi/spi-lantiq-ssc.c + +--- /dev/null ++++ b/Documentation/devicetree/bindings/spi/spi-lantiq-ssc.txt +@@ -0,0 +1,29 @@ ++Lantiq Synchronous Serial Controller (SSC) SPI master driver ++ ++Required properties: ++- compatible: "lantiq,ase-spi", "lantiq,falcon-spi", "lantiq,xrx100-spi" ++- #address-cells: see spi-bus.txt ++- #size-cells: see spi-bus.txt ++- reg: address and length of the spi master registers ++- interrupts: should contain the "spi_rx", "spi_tx" and "spi_err" interrupt. ++ ++ ++Optional properties: ++- clocks: spi clock phandle ++- num-cs: see spi-bus.txt, set to 8 if unset ++- base-cs: the number of the first chip select, set to 1 if unset. ++ ++Example: ++ ++ ++spi: spi@E100800 { ++ compatible = "lantiq,xrx200-spi", "lantiq,xrx100-spi"; ++ reg = <0xE100800 0x100>; ++ interrupt-parent = <&icu0>; ++ interrupts = <22 23 24>; ++ interrupt-names = "spi_rx", "spi_tx", "spi_err"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ num-cs = <6>; ++ base-cs = <1>; ++}; +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -403,6 +403,14 @@ config SPI_NUC900 + help + SPI driver for Nuvoton NUC900 series ARM SoCs + ++config SPI_LANTIQ_SSC ++ tristate "Lantiq SSC SPI controller" ++ depends on LANTIQ ++ help ++ This driver supports the Lantiq SSC SPI controller in master ++ mode. This controller is found on Intel (former Lantiq) SoCs like ++ the Danube, Falcon, xRX200, xRX300. ++ + config SPI_OC_TINY + tristate "OpenCores tiny SPI" + depends on GPIOLIB || COMPILE_TEST +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -47,6 +47,7 @@ obj-$(CONFIG_SPI_FSL_SPI) += spi-fsl-sp + obj-$(CONFIG_SPI_GPIO) += spi-gpio.o + obj-$(CONFIG_SPI_IMG_SPFI) += spi-img-spfi.o + obj-$(CONFIG_SPI_IMX) += spi-imx.o ++obj-$(CONFIG_SPI_LANTIQ_SSC) += spi-lantiq-ssc.o + obj-$(CONFIG_SPI_JCORE) += spi-jcore.o + obj-$(CONFIG_SPI_LM70_LLP) += spi-lm70llp.o + obj-$(CONFIG_SPI_LP8841_RTC) += spi-lp8841-rtc.o +--- /dev/null ++++ b/drivers/spi/spi-lantiq-ssc.c +@@ -0,0 +1,983 @@ ++/* ++ * Copyright (C) 2011-2015 Daniel Schwierzeck <daniel.schwierzeck@gmail.com> ++ * Copyright (C) 2016 Hauke Mehrtens <hauke@hauke-m.de> ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ */ ++ ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/of_device.h> ++#include <linux/clk.h> ++#include <linux/io.h> ++#include <linux/delay.h> ++#include <linux/interrupt.h> ++#include <linux/sched.h> ++#include <linux/completion.h> ++#include <linux/spinlock.h> ++#include <linux/err.h> ++#include <linux/gpio.h> ++#include <linux/pm_runtime.h> ++#include <linux/spi/spi.h> ++ ++#ifdef CONFIG_LANTIQ ++#include <lantiq_soc.h> ++#endif ++ ++#define SPI_RX_IRQ_NAME "spi_rx" ++#define SPI_TX_IRQ_NAME "spi_tx" ++#define SPI_ERR_IRQ_NAME "spi_err" ++#define SPI_FRM_IRQ_NAME "spi_frm" ++ ++#define SPI_CLC 0x00 ++#define SPI_PISEL 0x04 ++#define SPI_ID 0x08 ++#define SPI_CON 0x10 ++#define SPI_STAT 0x14 ++#define SPI_WHBSTATE 0x18 ++#define SPI_TB 0x20 ++#define SPI_RB 0x24 ++#define SPI_RXFCON 0x30 ++#define SPI_TXFCON 0x34 ++#define SPI_FSTAT 0x38 ++#define SPI_BRT 0x40 ++#define SPI_BRSTAT 0x44 ++#define SPI_SFCON 0x60 ++#define SPI_SFSTAT 0x64 ++#define SPI_GPOCON 0x70 ++#define SPI_GPOSTAT 0x74 ++#define SPI_FPGO 0x78 ++#define SPI_RXREQ 0x80 ++#define SPI_RXCNT 0x84 ++#define SPI_DMACON 0xec ++#define SPI_IRNEN 0xf4 ++#define SPI_IRNICR 0xf8 ++#define SPI_IRNCR 0xfc ++ ++#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ ++#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) ++#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ ++#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) ++#define SPI_CLC_DISS BIT(1) /* Disable status bit */ ++#define SPI_CLC_DISR BIT(0) /* Disable request bit */ ++ ++#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ ++#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) ++#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ ++#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) ++#define SPI_ID_MOD_S 8 /* Module ID */ ++#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S) ++#define SPI_ID_CFG_S 5 /* DMA interface support */ ++#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S) ++#define SPI_ID_REV_M 0x1F /* Hardware revision number */ ++ ++#define SPI_CON_BM_S 16 /* Data width selection */ ++#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) ++#define SPI_CON_EM BIT(24) /* Echo mode */ ++#define SPI_CON_IDLE BIT(23) /* Idle bit value */ ++#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ ++#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ ++#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ ++#define SPI_CON_AEN BIT(10) /* Abort error enable */ ++#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ ++#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ ++#define SPI_CON_LB BIT(7) /* Loopback control */ ++#define SPI_CON_PO BIT(6) /* Clock polarity control */ ++#define SPI_CON_PH BIT(5) /* Clock phase control */ ++#define SPI_CON_HB BIT(4) /* Heading control */ ++#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ ++#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ ++ ++#define SPI_STAT_RXBV_S 28 ++#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) ++#define SPI_STAT_BSY BIT(13) /* Busy flag */ ++#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ ++#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ ++#define SPI_STAT_AE BIT(10) /* Abort error flag */ ++#define SPI_STAT_RE BIT(9) /* Receive error flag */ ++#define SPI_STAT_TE BIT(8) /* Transmit error flag */ ++#define SPI_STAT_ME BIT(7) /* Mode error flag */ ++#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ ++#define SPI_STAT_EN BIT(0) /* Enable bit */ ++#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \ ++ SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE) ++ ++#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ ++#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ ++#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ ++#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ ++#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ ++#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ ++#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ ++#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ ++#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ ++#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ ++#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ ++#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ ++#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ ++#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ ++#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ ++#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ ++#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \ ++ SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \ ++ SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE) ++ ++#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ ++#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) ++#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ ++#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ ++ ++#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ ++#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) ++#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ ++#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ ++ ++#define SPI_FSTAT_RXFFL_S 0 ++#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) ++#define SPI_FSTAT_TXFFL_S 8 ++#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) ++ ++#define SPI_GPOCON_ISCSBN_S 8 ++#define SPI_GPOCON_INVOUTN_S 0 ++ ++#define SPI_FGPO_SETOUTN_S 8 ++#define SPI_FGPO_CLROUTN_S 0 ++ ++#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ ++#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ ++ ++#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ ++#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ ++#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ ++#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ ++#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ ++#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ ++#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ ++#define SPI_IRNEN_ALL 0x1F ++ ++struct lantiq_ssc_hwcfg { ++ unsigned int irnen_r; ++ unsigned int irnen_t; ++}; ++ ++struct lantiq_ssc_spi { ++ struct spi_master *master; ++ struct device *dev; ++ void __iomem *regbase; ++ struct clk *spi_clk; ++ struct clk *fpi_clk; ++ const struct lantiq_ssc_hwcfg *hwcfg; ++ ++ spinlock_t lock; ++ struct workqueue_struct *wq; ++ struct work_struct work; ++ ++ const u8 *tx; ++ u8 *rx; ++ unsigned int tx_todo; ++ unsigned int rx_todo; ++ unsigned int bits_per_word; ++ unsigned int speed_hz; ++ unsigned int tx_fifo_size; ++ unsigned int rx_fifo_size; ++ unsigned int base_cs; ++}; ++ ++static u32 lantiq_ssc_readl(const struct lantiq_ssc_spi *spi, u32 reg) ++{ ++ return __raw_readl(spi->regbase + reg); ++} ++ ++static void lantiq_ssc_writel(const struct lantiq_ssc_spi *spi, u32 val, ++ u32 reg) ++{ ++ __raw_writel(val, spi->regbase + reg); ++} ++ ++static void lantiq_ssc_maskl(const struct lantiq_ssc_spi *spi, u32 clr, ++ u32 set, u32 reg) ++{ ++ u32 val = __raw_readl(spi->regbase + reg); ++ ++ val &= ~clr; ++ val |= set; ++ __raw_writel(val, spi->regbase + reg); ++} ++ ++static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) ++{ ++ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ ++ return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; ++} ++ ++static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) ++{ ++ u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ ++ return fstat & SPI_FSTAT_RXFFL_M; ++} ++ ++static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) ++{ ++ return spi->tx_fifo_size - tx_fifo_level(spi); ++} ++ ++static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) ++{ ++ u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S; ++ ++ val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; ++ lantiq_ssc_writel(spi, val, SPI_RXFCON); ++} ++ ++static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) ++{ ++ u32 val = 1 << SPI_TXFCON_TXFITL_S; ++ ++ val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; ++ lantiq_ssc_writel(spi, val, SPI_TXFCON); ++} ++ ++static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); ++} ++ ++static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); ++} ++ ++static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); ++} ++ ++static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) ++{ ++ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); ++} ++ ++static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, ++ unsigned int max_speed_hz) ++{ ++ u32 spi_clk, brt; ++ ++ /* ++ * SPI module clock is derived from FPI bus clock dependent on ++ * divider value in CLC.RMS which is always set to 1. ++ * ++ * f_SPI ++ * baudrate = -------------- ++ * 2 * (BR + 1) ++ */ ++ spi_clk = clk_get_rate(spi->fpi_clk) / 2; ++ ++ if (max_speed_hz > spi_clk) ++ brt = 0; ++ else ++ brt = spi_clk / max_speed_hz - 1; ++ ++ if (brt > 0xFFFF) ++ brt = 0xFFFF; ++ ++ dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", ++ spi_clk, max_speed_hz, brt); ++ ++ lantiq_ssc_writel(spi, brt, SPI_BRT); ++} ++ ++static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, ++ unsigned int bits_per_word) ++{ ++ u32 bm; ++ ++ /* CON.BM value = bits_per_word - 1 */ ++ bm = (bits_per_word - 1) << SPI_CON_BM_S; ++ ++ lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); ++} ++ ++static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, ++ unsigned int mode) ++{ ++ u32 con_set = 0, con_clr = 0; ++ ++ /* ++ * SPI mode mapping in CON register: ++ * Mode CPOL CPHA CON.PO CON.PH ++ * 0 0 0 0 1 ++ * 1 0 1 0 0 ++ * 2 1 0 1 1 ++ * 3 1 1 1 0 ++ */ ++ if (mode & SPI_CPHA) ++ con_clr |= SPI_CON_PH; ++ else ++ con_set |= SPI_CON_PH; ++ ++ if (mode & SPI_CPOL) ++ con_set |= SPI_CON_PO | SPI_CON_IDLE; ++ else ++ con_clr |= SPI_CON_PO | SPI_CON_IDLE; ++ ++ /* Set heading control */ ++ if (mode & SPI_LSB_FIRST) ++ con_clr |= SPI_CON_HB; ++ else ++ con_set |= SPI_CON_HB; ++ ++ /* Set loopback mode */ ++ if (mode & SPI_LOOP) ++ con_set |= SPI_CON_LB; ++ else ++ con_clr |= SPI_CON_LB; ++ ++ lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON); ++} ++ ++static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) ++{ ++ const struct lantiq_ssc_hwcfg *hwcfg = spi->hwcfg; ++ ++ /* ++ * Set clock divider for run mode to 1 to ++ * run at same frequency as FPI bus ++ */ ++ lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); ++ ++ /* Put controller into config mode */ ++ hw_enter_config_mode(spi); ++ ++ /* Clear error flags */ ++ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ ++ /* Enable error checking, disable TX/RX */ ++ lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | ++ SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ ++ /* Setup default SPI mode */ ++ hw_setup_bits_per_word(spi, spi->bits_per_word); ++ hw_setup_clock_mode(spi, SPI_MODE_0); ++ ++ /* Enable master mode and clear error flags */ ++ lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, ++ SPI_WHBSTATE); ++ ++ /* Reset GPIO/CS registers */ ++ lantiq_ssc_writel(spi, 0, SPI_GPOCON); ++ lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO); ++ ++ /* Enable and flush FIFOs */ ++ rx_fifo_reset(spi); ++ tx_fifo_reset(spi); ++ ++ /* Enable interrupts */ ++ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, ++ SPI_IRNEN); ++} ++ ++static int lantiq_ssc_setup(struct spi_device *spidev) ++{ ++ struct spi_master *master = spidev->master; ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ unsigned int cs = spidev->chip_select; ++ u32 gpocon; ++ ++ /* GPIOs are used for CS */ ++ if (gpio_is_valid(spidev->cs_gpio)) ++ return 0; ++ ++ dev_dbg(spi->dev, "using internal chipselect %u\n", cs); ++ ++ if (cs < spi->base_cs) { ++ dev_err(spi->dev, ++ "chipselect %i too small (min %i)\n", cs, spi->base_cs); ++ return -EINVAL; ++ } ++ ++ /* set GPO pin to CS mode */ ++ gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S); ++ ++ /* invert GPO pin */ ++ if (spidev->mode & SPI_CS_HIGH) ++ gpocon |= 1 << (cs - spi->base_cs); ++ ++ lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON); ++ ++ return 0; ++} ++ ++static int lantiq_ssc_prepare_message(struct spi_master *master, ++ struct spi_message *message) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ hw_enter_config_mode(spi); ++ hw_setup_clock_mode(spi, message->spi->mode); ++ hw_enter_active_mode(spi); ++ ++ return 0; ++} ++ ++static void hw_setup_transfer(struct lantiq_ssc_spi *spi, ++ struct spi_device *spidev, struct spi_transfer *t) ++{ ++ unsigned int speed_hz = t->speed_hz; ++ unsigned int bits_per_word = t->bits_per_word; ++ u32 con; ++ ++ if (bits_per_word != spi->bits_per_word || ++ speed_hz != spi->speed_hz) { ++ hw_enter_config_mode(spi); ++ hw_setup_speed_hz(spi, speed_hz); ++ hw_setup_bits_per_word(spi, bits_per_word); ++ hw_enter_active_mode(spi); ++ ++ spi->speed_hz = speed_hz; ++ spi->bits_per_word = bits_per_word; ++ } ++ ++ /* Configure transmitter and receiver */ ++ con = lantiq_ssc_readl(spi, SPI_CON); ++ if (t->tx_buf) ++ con &= ~SPI_CON_TXOFF; ++ else ++ con |= SPI_CON_TXOFF; ++ ++ if (t->rx_buf) ++ con &= ~SPI_CON_RXOFF; ++ else ++ con |= SPI_CON_RXOFF; ++ ++ lantiq_ssc_writel(spi, con, SPI_CON); ++} ++ ++static int lantiq_ssc_unprepare_message(struct spi_master *master, ++ struct spi_message *message) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ flush_workqueue(spi->wq); ++ ++ /* Disable transmitter and receiver while idle */ ++ lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ ++ return 0; ++} ++ ++static void tx_fifo_write(struct lantiq_ssc_spi *spi) ++{ ++ const u8 *tx8; ++ const u16 *tx16; ++ const u32 *tx32; ++ u32 data; ++ unsigned int tx_free = tx_fifo_free(spi); ++ ++ while (spi->tx_todo && tx_free) { ++ switch (spi->bits_per_word) { ++ case 2 ... 8: ++ tx8 = spi->tx; ++ data = *tx8; ++ spi->tx_todo--; ++ spi->tx++; ++ break; ++ case 16: ++ tx16 = (u16 *) spi->tx; ++ data = *tx16; ++ spi->tx_todo -= 2; ++ spi->tx += 2; ++ break; ++ case 32: ++ tx32 = (u32 *) spi->tx; ++ data = *tx32; ++ spi->tx_todo -= 4; ++ spi->tx += 4; ++ break; ++ default: ++ WARN_ON(1); ++ data = 0; ++ break; ++ } ++ ++ lantiq_ssc_writel(spi, data, SPI_TB); ++ tx_free--; ++ } ++} ++ ++static void rx_fifo_read_full_duplex(struct lantiq_ssc_spi *spi) ++{ ++ u8 *rx8; ++ u16 *rx16; ++ u32 *rx32; ++ u32 data; ++ unsigned int rx_fill = rx_fifo_level(spi); ++ ++ while (rx_fill) { ++ data = lantiq_ssc_readl(spi, SPI_RB); ++ ++ switch (spi->bits_per_word) { ++ case 2 ... 8: ++ rx8 = spi->rx; ++ *rx8 = data; ++ spi->rx_todo--; ++ spi->rx++; ++ break; ++ case 16: ++ rx16 = (u16 *) spi->rx; ++ *rx16 = data; ++ spi->rx_todo -= 2; ++ spi->rx += 2; ++ break; ++ case 32: ++ rx32 = (u32 *) spi->rx; ++ *rx32 = data; ++ spi->rx_todo -= 4; ++ spi->rx += 4; ++ break; ++ default: ++ WARN_ON(1); ++ break; ++ } ++ ++ rx_fill--; ++ } ++} ++ ++static void rx_fifo_read_half_duplex(struct lantiq_ssc_spi *spi) ++{ ++ u32 data, *rx32; ++ u8 *rx8; ++ unsigned int rxbv, shift; ++ unsigned int rx_fill = rx_fifo_level(spi); ++ ++ /* ++ * In RX-only mode the bits per word value is ignored by HW. A value ++ * of 32 is used instead. Thus all 4 bytes per FIFO must be read. ++ * If remaining RX bytes are less than 4, the FIFO must be read ++ * differently. The amount of received and valid bytes is indicated ++ * by STAT.RXBV register value. ++ */ ++ while (rx_fill) { ++ if (spi->rx_todo < 4) { ++ rxbv = (lantiq_ssc_readl(spi, SPI_STAT) & ++ SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; ++ data = lantiq_ssc_readl(spi, SPI_RB); ++ ++ shift = (rxbv - 1) * 8; ++ rx8 = spi->rx; ++ ++ while (rxbv) { ++ *rx8++ = (data >> shift) & 0xFF; ++ rxbv--; ++ shift -= 8; ++ spi->rx_todo--; ++ spi->rx++; ++ } ++ } else { ++ data = lantiq_ssc_readl(spi, SPI_RB); ++ rx32 = (u32 *) spi->rx; ++ ++ *rx32++ = data; ++ spi->rx_todo -= 4; ++ spi->rx += 4; ++ } ++ rx_fill--; ++ } ++} ++ ++static void rx_request(struct lantiq_ssc_spi *spi) ++{ ++ unsigned int rxreq, rxreq_max; ++ ++ /* ++ * To avoid receive overflows at high clocks it is better to request ++ * only the amount of bytes that fits into all FIFOs. This value ++ * depends on the FIFO size implemented in hardware. ++ */ ++ rxreq = spi->rx_todo; ++ rxreq_max = spi->rx_fifo_size * 4; ++ if (rxreq > rxreq_max) ++ rxreq = rxreq_max; ++ ++ lantiq_ssc_writel(spi, rxreq, SPI_RXREQ); ++} ++ ++static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) ++{ ++ struct lantiq_ssc_spi *spi = data; ++ ++ if (spi->tx) { ++ if (spi->rx && spi->rx_todo) ++ rx_fifo_read_full_duplex(spi); ++ ++ if (spi->tx_todo) ++ tx_fifo_write(spi); ++ else if (!tx_fifo_level(spi)) ++ goto completed; ++ } else if (spi->rx) { ++ if (spi->rx_todo) { ++ rx_fifo_read_half_duplex(spi); ++ ++ if (spi->rx_todo) ++ rx_request(spi); ++ else ++ goto completed; ++ } else { ++ goto completed; ++ } ++ } ++ ++ return IRQ_HANDLED; ++ ++completed: ++ queue_work(spi->wq, &spi->work); ++ ++ return IRQ_HANDLED; ++} ++ ++static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) ++{ ++ struct lantiq_ssc_spi *spi = data; ++ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ ++ if (!(stat & SPI_STAT_ERRORS)) ++ return IRQ_NONE; ++ ++ if (stat & SPI_STAT_RUE) ++ dev_err(spi->dev, "receive underflow error\n"); ++ if (stat & SPI_STAT_TUE) ++ dev_err(spi->dev, "transmit underflow error\n"); ++ if (stat & SPI_STAT_AE) ++ dev_err(spi->dev, "abort error\n"); ++ if (stat & SPI_STAT_RE) ++ dev_err(spi->dev, "receive overflow error\n"); ++ if (stat & SPI_STAT_TE) ++ dev_err(spi->dev, "transmit overflow error\n"); ++ if (stat & SPI_STAT_ME) ++ dev_err(spi->dev, "mode error\n"); ++ ++ /* Clear error flags */ ++ lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ ++ /* set bad status so it can be retried */ ++ if (spi->master->cur_msg) ++ spi->master->cur_msg->status = -EIO; ++ queue_work(spi->wq, &spi->work); ++ ++ return IRQ_HANDLED; ++} ++ ++static int transfer_start(struct lantiq_ssc_spi *spi, struct spi_device *spidev, ++ struct spi_transfer *t) ++{ ++ unsigned long flags; ++ ++ spin_lock_irqsave(&spi->lock, flags); ++ ++ spi->tx = t->tx_buf; ++ spi->rx = t->rx_buf; ++ ++ if (t->tx_buf) { ++ spi->tx_todo = t->len; ++ ++ /* initially fill TX FIFO */ ++ tx_fifo_write(spi); ++ } ++ ++ if (spi->rx) { ++ spi->rx_todo = t->len; ++ ++ /* start shift clock in RX-only mode */ ++ if (!spi->tx) ++ rx_request(spi); ++ } ++ ++ spin_unlock_irqrestore(&spi->lock, flags); ++ ++ return t->len; ++} ++ ++/* ++ * The driver only gets an interrupt when the FIFO is empty, but there ++ * is an additional shift register from which the data is written to ++ * the wire. We get the last interrupt when the controller starts to ++ * write the last word to the wire, not when it is finished. Do busy ++ * waiting till it finishes. ++ */ ++static void lantiq_ssc_bussy_work(struct work_struct *work) ++{ ++ struct lantiq_ssc_spi *spi; ++ unsigned long long timeout = 8LL * 1000LL; ++ unsigned long end; ++ ++ spi = container_of(work, typeof(*spi), work); ++ ++ do_div(timeout, spi->speed_hz); ++ timeout += timeout + 100; /* some tolerance */ ++ ++ end = jiffies + msecs_to_jiffies(timeout); ++ do { ++ u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ ++ if (!(stat & SPI_STAT_BSY)) { ++ spi_finalize_current_transfer(spi->master); ++ return; ++ } ++ ++ cond_resched(); ++ } while (!time_after_eq(jiffies, end)); ++ ++ if (spi->master->cur_msg) ++ spi->master->cur_msg->status = -EIO; ++ spi_finalize_current_transfer(spi->master); ++} ++ ++static void lantiq_ssc_handle_err(struct spi_master *master, ++ struct spi_message *message) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ /* flush FIFOs on timeout */ ++ rx_fifo_flush(spi); ++ tx_fifo_flush(spi); ++} ++ ++static void lantiq_ssc_set_cs(struct spi_device *spidev, bool enable) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(spidev->master); ++ unsigned int cs = spidev->chip_select; ++ u32 fgpo; ++ ++ if (!!(spidev->mode & SPI_CS_HIGH) == enable) ++ fgpo = (1 << (cs - spi->base_cs)); ++ else ++ fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S)); ++ ++ lantiq_ssc_writel(spi, fgpo, SPI_FPGO); ++} ++ ++static int lantiq_ssc_transfer_one(struct spi_master *master, ++ struct spi_device *spidev, ++ struct spi_transfer *t) ++{ ++ struct lantiq_ssc_spi *spi = spi_master_get_devdata(master); ++ ++ hw_setup_transfer(spi, spidev, t); ++ ++ return transfer_start(spi, spidev, t); ++} ++ ++static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { ++ .irnen_r = SPI_IRNEN_R_XWAY, ++ .irnen_t = SPI_IRNEN_T_XWAY, ++}; ++ ++static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { ++ .irnen_r = SPI_IRNEN_R_XRX, ++ .irnen_t = SPI_IRNEN_T_XRX, ++}; ++ ++static const struct of_device_id lantiq_ssc_match[] = { ++ { .compatible = "lantiq,ase-spi", .data = &lantiq_ssc_xway, }, ++ { .compatible = "lantiq,falcon-spi", .data = &lantiq_ssc_xrx, }, ++ { .compatible = "lantiq,xrx100-spi", .data = &lantiq_ssc_xrx, }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, lantiq_ssc_match); ++ ++static int lantiq_ssc_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct spi_master *master; ++ struct resource *res; ++ struct lantiq_ssc_spi *spi; ++ const struct lantiq_ssc_hwcfg *hwcfg; ++ const struct of_device_id *match; ++ int err, rx_irq, tx_irq, err_irq; ++ u32 id, supports_dma, revision; ++ unsigned int num_cs; ++ ++ match = of_match_device(lantiq_ssc_match, dev); ++ if (!match) { ++ dev_err(dev, "no device match\n"); ++ return -EINVAL; ++ } ++ hwcfg = match->data; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ if (!res) { ++ dev_err(dev, "failed to get resources\n"); ++ return -ENXIO; ++ } ++ ++ rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); ++ if (rx_irq < 0) { ++ dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); ++ if (tx_irq < 0) { ++ dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); ++ if (err_irq < 0) { ++ dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); ++ return -ENXIO; ++ } ++ ++ master = spi_alloc_master(dev, sizeof(struct lantiq_ssc_spi)); ++ if (!master) ++ return -ENOMEM; ++ ++ spi = spi_master_get_devdata(master); ++ spi->master = master; ++ spi->dev = dev; ++ spi->hwcfg = hwcfg; ++ platform_set_drvdata(pdev, spi); ++ ++ spi->regbase = devm_ioremap_resource(dev, res); ++ if (IS_ERR(spi->regbase)) { ++ err = PTR_ERR(spi->regbase); ++ goto err_master_put; ++ } ++ ++ err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt, ++ 0, SPI_RX_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt, ++ 0, SPI_TX_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt, ++ 0, SPI_ERR_IRQ_NAME, spi); ++ if (err) ++ goto err_master_put; ++ ++ spi->spi_clk = devm_clk_get(dev, "gate"); ++ if (IS_ERR(spi->spi_clk)) { ++ err = PTR_ERR(spi->spi_clk); ++ goto err_master_put; ++ } ++ err = clk_prepare_enable(spi->spi_clk); ++ if (err) ++ goto err_master_put; ++ ++ /* ++ * Use the old clk_get_fpi() function on Lantiq platform, till it ++ * supports common clk. ++ */ ++#if defined(CONFIG_LANTIQ) && !defined(CONFIG_COMMON_CLK) ++ spi->fpi_clk = clk_get_fpi(); ++#else ++ spi->fpi_clk = clk_get(dev, "freq"); ++#endif ++ if (IS_ERR(spi->fpi_clk)) { ++ err = PTR_ERR(spi->fpi_clk); ++ goto err_clk_disable; ++ } ++ ++ num_cs = 8; ++ of_property_read_u32(pdev->dev.of_node, "num-cs", &num_cs); ++ ++ spi->base_cs = 1; ++ of_property_read_u32(pdev->dev.of_node, "base-cs", &spi->base_cs); ++ ++ spin_lock_init(&spi->lock); ++ spi->bits_per_word = 8; ++ spi->speed_hz = 0; ++ ++ master->dev.of_node = pdev->dev.of_node; ++ master->num_chipselect = num_cs; ++ master->setup = lantiq_ssc_setup; ++ master->set_cs = lantiq_ssc_set_cs; ++ master->handle_err = lantiq_ssc_handle_err; ++ master->prepare_message = lantiq_ssc_prepare_message; ++ master->unprepare_message = lantiq_ssc_unprepare_message; ++ master->transfer_one = lantiq_ssc_transfer_one; ++ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH | ++ SPI_LOOP; ++ master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 8) | ++ SPI_BPW_MASK(16) | SPI_BPW_MASK(32); ++ ++ spi->wq = alloc_ordered_workqueue(dev_name(dev), 0); ++ if (!spi->wq) { ++ err = -ENOMEM; ++ goto err_clk_put; ++ } ++ INIT_WORK(&spi->work, lantiq_ssc_bussy_work); ++ ++ id = lantiq_ssc_readl(spi, SPI_ID); ++ spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; ++ spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; ++ supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S; ++ revision = id & SPI_ID_REV_M; ++ ++ lantiq_ssc_hw_init(spi); ++ ++ dev_info(dev, ++ "Lantiq SSC SPI controller (Rev %i, TXFS %u, RXFS %u, DMA %u)\n", ++ revision, spi->tx_fifo_size, spi->rx_fifo_size, supports_dma); ++ ++ err = devm_spi_register_master(dev, master); ++ if (err) { ++ dev_err(dev, "failed to register spi_master\n"); ++ goto err_wq_destroy; ++ } ++ ++ return 0; ++ ++err_wq_destroy: ++ destroy_workqueue(spi->wq); ++err_clk_put: ++ clk_put(spi->fpi_clk); ++err_clk_disable: ++ clk_disable_unprepare(spi->spi_clk); ++err_master_put: ++ spi_master_put(master); ++ ++ return err; ++} ++ ++static int lantiq_ssc_remove(struct platform_device *pdev) ++{ ++ struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); ++ ++ lantiq_ssc_writel(spi, 0, SPI_IRNEN); ++ lantiq_ssc_writel(spi, 0, SPI_CLC); ++ rx_fifo_flush(spi); ++ tx_fifo_flush(spi); ++ hw_enter_config_mode(spi); ++ ++ destroy_workqueue(spi->wq); ++ clk_disable_unprepare(spi->spi_clk); ++ clk_put(spi->fpi_clk); ++ ++ return 0; ++} ++ ++static struct platform_driver lantiq_ssc_driver = { ++ .probe = lantiq_ssc_probe, ++ .remove = lantiq_ssc_remove, ++ .driver = { ++ .name = "spi-lantiq-ssc", ++ .owner = THIS_MODULE, ++ .of_match_table = lantiq_ssc_match, ++ }, ++}; ++module_platform_driver(lantiq_ssc_driver); ++ ++MODULE_DESCRIPTION("Lantiq SSC SPI controller driver"); ++MODULE_AUTHOR("Daniel Schwierzeck <daniel.schwierzeck@gmail.com>"); ++MODULE_AUTHOR("Hauke Mehrtens <hauke@hauke-m.de>"); ++MODULE_LICENSE("GPL"); ++MODULE_ALIAS("platform:spi-lantiq-ssc"); diff --git a/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch b/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch new file mode 100644 index 0000000000..e81f97f9d4 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0091-spi-lantiq-ssc-fix-platform_no_drv_owner.cocci-warni.patch @@ -0,0 +1,28 @@ +From ba6e1e39969fa5435127a632757e2906caca7730 Mon Sep 17 00:00:00 2001 +From: kbuild test robot <fengguang.wu@intel.com> +Date: Mon, 20 Feb 2017 01:33:10 +0800 +Subject: spi: lantiq-ssc: fix platform_no_drv_owner.cocci warnings + +drivers/spi/spi-lantiq-ssc.c:973:3-8: No need to set .owner here. The core will do it. + + Remove .owner field if calls are used which set it automatically + +Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci + +Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> +Acked-by: Hauke Mehrtens <hauke@hauke-m.de> +Signed-off-by: Mark Brown <broonie@kernel.org> +--- + drivers/spi/spi-lantiq-ssc.c | 1 - + 1 file changed, 1 deletion(-) + +--- a/drivers/spi/spi-lantiq-ssc.c ++++ b/drivers/spi/spi-lantiq-ssc.c +@@ -970,7 +970,6 @@ static struct platform_driver lantiq_ssc + .remove = lantiq_ssc_remove, + .driver = { + .name = "spi-lantiq-ssc", +- .owner = THIS_MODULE, + .of_match_table = lantiq_ssc_match, + }, + }; diff --git a/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch b/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch new file mode 100644 index 0000000000..9bcde3c08a --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0092-spi-lantiq-ssc-add-LTQ_-prefix-to-defines.patch @@ -0,0 +1,723 @@ +From 1aa83e0a2821cd7f4e8f3ddb367859f52e468bf1 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Mon, 27 Feb 2017 23:21:25 +0100 +Subject: spi: lantiq-ssc: add LTQ_ prefix to defines + +The blackfin architecture has a SPI_STAT define which conflicts with +the define from the spi-lantiq-ssc driver in compile test mode. Fix +this by adding a prefix in front of every define. + +Reported-by: kbuild test robot <fengguang.wu@intel.com> +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +Signed-off-by: Mark Brown <broonie@kernel.org> +--- + drivers/spi/spi-lantiq-ssc.c | 437 ++++++++++++++++++++++--------------------- + 1 file changed, 222 insertions(+), 215 deletions(-) + +--- a/drivers/spi/spi-lantiq-ssc.c ++++ b/drivers/spi/spi-lantiq-ssc.c +@@ -26,136 +26,140 @@ + #include <lantiq_soc.h> + #endif + +-#define SPI_RX_IRQ_NAME "spi_rx" +-#define SPI_TX_IRQ_NAME "spi_tx" +-#define SPI_ERR_IRQ_NAME "spi_err" +-#define SPI_FRM_IRQ_NAME "spi_frm" +- +-#define SPI_CLC 0x00 +-#define SPI_PISEL 0x04 +-#define SPI_ID 0x08 +-#define SPI_CON 0x10 +-#define SPI_STAT 0x14 +-#define SPI_WHBSTATE 0x18 +-#define SPI_TB 0x20 +-#define SPI_RB 0x24 +-#define SPI_RXFCON 0x30 +-#define SPI_TXFCON 0x34 +-#define SPI_FSTAT 0x38 +-#define SPI_BRT 0x40 +-#define SPI_BRSTAT 0x44 +-#define SPI_SFCON 0x60 +-#define SPI_SFSTAT 0x64 +-#define SPI_GPOCON 0x70 +-#define SPI_GPOSTAT 0x74 +-#define SPI_FPGO 0x78 +-#define SPI_RXREQ 0x80 +-#define SPI_RXCNT 0x84 +-#define SPI_DMACON 0xec +-#define SPI_IRNEN 0xf4 +-#define SPI_IRNICR 0xf8 +-#define SPI_IRNCR 0xfc +- +-#define SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ +-#define SPI_CLC_SMC_M (0xFF << SPI_CLC_SMC_S) +-#define SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ +-#define SPI_CLC_RMC_M (0xFF << SPI_CLC_RMC_S) +-#define SPI_CLC_DISS BIT(1) /* Disable status bit */ +-#define SPI_CLC_DISR BIT(0) /* Disable request bit */ +- +-#define SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ +-#define SPI_ID_TXFS_M (0x3F << SPI_ID_TXFS_S) +-#define SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ +-#define SPI_ID_RXFS_M (0x3F << SPI_ID_RXFS_S) +-#define SPI_ID_MOD_S 8 /* Module ID */ +-#define SPI_ID_MOD_M (0xff << SPI_ID_MOD_S) +-#define SPI_ID_CFG_S 5 /* DMA interface support */ +-#define SPI_ID_CFG_M (1 << SPI_ID_CFG_S) +-#define SPI_ID_REV_M 0x1F /* Hardware revision number */ +- +-#define SPI_CON_BM_S 16 /* Data width selection */ +-#define SPI_CON_BM_M (0x1F << SPI_CON_BM_S) +-#define SPI_CON_EM BIT(24) /* Echo mode */ +-#define SPI_CON_IDLE BIT(23) /* Idle bit value */ +-#define SPI_CON_ENBV BIT(22) /* Enable byte valid control */ +-#define SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ +-#define SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ +-#define SPI_CON_AEN BIT(10) /* Abort error enable */ +-#define SPI_CON_REN BIT(9) /* Receive overflow error enable */ +-#define SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ +-#define SPI_CON_LB BIT(7) /* Loopback control */ +-#define SPI_CON_PO BIT(6) /* Clock polarity control */ +-#define SPI_CON_PH BIT(5) /* Clock phase control */ +-#define SPI_CON_HB BIT(4) /* Heading control */ +-#define SPI_CON_RXOFF BIT(1) /* Switch receiver off */ +-#define SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ +- +-#define SPI_STAT_RXBV_S 28 +-#define SPI_STAT_RXBV_M (0x7 << SPI_STAT_RXBV_S) +-#define SPI_STAT_BSY BIT(13) /* Busy flag */ +-#define SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ +-#define SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ +-#define SPI_STAT_AE BIT(10) /* Abort error flag */ +-#define SPI_STAT_RE BIT(9) /* Receive error flag */ +-#define SPI_STAT_TE BIT(8) /* Transmit error flag */ +-#define SPI_STAT_ME BIT(7) /* Mode error flag */ +-#define SPI_STAT_MS BIT(1) /* Master/slave select bit */ +-#define SPI_STAT_EN BIT(0) /* Enable bit */ +-#define SPI_STAT_ERRORS (SPI_STAT_ME | SPI_STAT_TE | SPI_STAT_RE | \ +- SPI_STAT_AE | SPI_STAT_TUE | SPI_STAT_RUE) +- +-#define SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ +-#define SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ +-#define SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ +-#define SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ +-#define SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ +-#define SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ +-#define SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ +-#define SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ +-#define SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ +-#define SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ +-#define SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ +-#define SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ +-#define SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ +-#define SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ +-#define SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ +-#define SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ +-#define SPI_WHBSTATE_CLR_ERRORS (SPI_WHBSTATE_CLRRUE | SPI_WHBSTATE_CLRME | \ +- SPI_WHBSTATE_CLRTE | SPI_WHBSTATE_CLRRE | \ +- SPI_WHBSTATE_CLRAE | SPI_WHBSTATE_CLRTUE) +- +-#define SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ +-#define SPI_RXFCON_RXFITL_M (0x3F << SPI_RXFCON_RXFITL_S) +-#define SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ +-#define SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ +- +-#define SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ +-#define SPI_TXFCON_TXFITL_M (0x3F << SPI_TXFCON_TXFITL_S) +-#define SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ +-#define SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ +- +-#define SPI_FSTAT_RXFFL_S 0 +-#define SPI_FSTAT_RXFFL_M (0x3f << SPI_FSTAT_RXFFL_S) +-#define SPI_FSTAT_TXFFL_S 8 +-#define SPI_FSTAT_TXFFL_M (0x3f << SPI_FSTAT_TXFFL_S) +- +-#define SPI_GPOCON_ISCSBN_S 8 +-#define SPI_GPOCON_INVOUTN_S 0 +- +-#define SPI_FGPO_SETOUTN_S 8 +-#define SPI_FGPO_CLROUTN_S 0 +- +-#define SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ +-#define SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ +- +-#define SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ +-#define SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ +-#define SPI_IRNEN_E BIT(2) /* Error end interrupt request */ +-#define SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ +-#define SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ +-#define SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ +-#define SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ +-#define SPI_IRNEN_ALL 0x1F ++#define LTQ_SPI_RX_IRQ_NAME "spi_rx" ++#define LTQ_SPI_TX_IRQ_NAME "spi_tx" ++#define LTQ_SPI_ERR_IRQ_NAME "spi_err" ++#define LTQ_SPI_FRM_IRQ_NAME "spi_frm" ++ ++#define LTQ_SPI_CLC 0x00 ++#define LTQ_SPI_PISEL 0x04 ++#define LTQ_SPI_ID 0x08 ++#define LTQ_SPI_CON 0x10 ++#define LTQ_SPI_STAT 0x14 ++#define LTQ_SPI_WHBSTATE 0x18 ++#define LTQ_SPI_TB 0x20 ++#define LTQ_SPI_RB 0x24 ++#define LTQ_SPI_RXFCON 0x30 ++#define LTQ_SPI_TXFCON 0x34 ++#define LTQ_SPI_FSTAT 0x38 ++#define LTQ_SPI_BRT 0x40 ++#define LTQ_SPI_BRSTAT 0x44 ++#define LTQ_SPI_SFCON 0x60 ++#define LTQ_SPI_SFSTAT 0x64 ++#define LTQ_SPI_GPOCON 0x70 ++#define LTQ_SPI_GPOSTAT 0x74 ++#define LTQ_SPI_FPGO 0x78 ++#define LTQ_SPI_RXREQ 0x80 ++#define LTQ_SPI_RXCNT 0x84 ++#define LTQ_SPI_DMACON 0xec ++#define LTQ_SPI_IRNEN 0xf4 ++#define LTQ_SPI_IRNICR 0xf8 ++#define LTQ_SPI_IRNCR 0xfc ++ ++#define LTQ_SPI_CLC_SMC_S 16 /* Clock divider for sleep mode */ ++#define LTQ_SPI_CLC_SMC_M (0xFF << LTQ_SPI_CLC_SMC_S) ++#define LTQ_SPI_CLC_RMC_S 8 /* Clock divider for normal run mode */ ++#define LTQ_SPI_CLC_RMC_M (0xFF << LTQ_SPI_CLC_RMC_S) ++#define LTQ_SPI_CLC_DISS BIT(1) /* Disable status bit */ ++#define LTQ_SPI_CLC_DISR BIT(0) /* Disable request bit */ ++ ++#define LTQ_SPI_ID_TXFS_S 24 /* Implemented TX FIFO size */ ++#define LTQ_SPI_ID_TXFS_M (0x3F << LTQ_SPI_ID_TXFS_S) ++#define LTQ_SPI_ID_RXFS_S 16 /* Implemented RX FIFO size */ ++#define LTQ_SPI_ID_RXFS_M (0x3F << LTQ_SPI_ID_RXFS_S) ++#define LTQ_SPI_ID_MOD_S 8 /* Module ID */ ++#define LTQ_SPI_ID_MOD_M (0xff << LTQ_SPI_ID_MOD_S) ++#define LTQ_SPI_ID_CFG_S 5 /* DMA interface support */ ++#define LTQ_SPI_ID_CFG_M (1 << LTQ_SPI_ID_CFG_S) ++#define LTQ_SPI_ID_REV_M 0x1F /* Hardware revision number */ ++ ++#define LTQ_SPI_CON_BM_S 16 /* Data width selection */ ++#define LTQ_SPI_CON_BM_M (0x1F << LTQ_SPI_CON_BM_S) ++#define LTQ_SPI_CON_EM BIT(24) /* Echo mode */ ++#define LTQ_SPI_CON_IDLE BIT(23) /* Idle bit value */ ++#define LTQ_SPI_CON_ENBV BIT(22) /* Enable byte valid control */ ++#define LTQ_SPI_CON_RUEN BIT(12) /* Receive underflow error enable */ ++#define LTQ_SPI_CON_TUEN BIT(11) /* Transmit underflow error enable */ ++#define LTQ_SPI_CON_AEN BIT(10) /* Abort error enable */ ++#define LTQ_SPI_CON_REN BIT(9) /* Receive overflow error enable */ ++#define LTQ_SPI_CON_TEN BIT(8) /* Transmit overflow error enable */ ++#define LTQ_SPI_CON_LB BIT(7) /* Loopback control */ ++#define LTQ_SPI_CON_PO BIT(6) /* Clock polarity control */ ++#define LTQ_SPI_CON_PH BIT(5) /* Clock phase control */ ++#define LTQ_SPI_CON_HB BIT(4) /* Heading control */ ++#define LTQ_SPI_CON_RXOFF BIT(1) /* Switch receiver off */ ++#define LTQ_SPI_CON_TXOFF BIT(0) /* Switch transmitter off */ ++ ++#define LTQ_SPI_STAT_RXBV_S 28 ++#define LTQ_SPI_STAT_RXBV_M (0x7 << LTQ_SPI_STAT_RXBV_S) ++#define LTQ_SPI_STAT_BSY BIT(13) /* Busy flag */ ++#define LTQ_SPI_STAT_RUE BIT(12) /* Receive underflow error flag */ ++#define LTQ_SPI_STAT_TUE BIT(11) /* Transmit underflow error flag */ ++#define LTQ_SPI_STAT_AE BIT(10) /* Abort error flag */ ++#define LTQ_SPI_STAT_RE BIT(9) /* Receive error flag */ ++#define LTQ_SPI_STAT_TE BIT(8) /* Transmit error flag */ ++#define LTQ_SPI_STAT_ME BIT(7) /* Mode error flag */ ++#define LTQ_SPI_STAT_MS BIT(1) /* Master/slave select bit */ ++#define LTQ_SPI_STAT_EN BIT(0) /* Enable bit */ ++#define LTQ_SPI_STAT_ERRORS (LTQ_SPI_STAT_ME | LTQ_SPI_STAT_TE | \ ++ LTQ_SPI_STAT_RE | LTQ_SPI_STAT_AE | \ ++ LTQ_SPI_STAT_TUE | LTQ_SPI_STAT_RUE) ++ ++#define LTQ_SPI_WHBSTATE_SETTUE BIT(15) /* Set transmit underflow error flag */ ++#define LTQ_SPI_WHBSTATE_SETAE BIT(14) /* Set abort error flag */ ++#define LTQ_SPI_WHBSTATE_SETRE BIT(13) /* Set receive error flag */ ++#define LTQ_SPI_WHBSTATE_SETTE BIT(12) /* Set transmit error flag */ ++#define LTQ_SPI_WHBSTATE_CLRTUE BIT(11) /* Clear transmit underflow error flag */ ++#define LTQ_SPI_WHBSTATE_CLRAE BIT(10) /* Clear abort error flag */ ++#define LTQ_SPI_WHBSTATE_CLRRE BIT(9) /* Clear receive error flag */ ++#define LTQ_SPI_WHBSTATE_CLRTE BIT(8) /* Clear transmit error flag */ ++#define LTQ_SPI_WHBSTATE_SETME BIT(7) /* Set mode error flag */ ++#define LTQ_SPI_WHBSTATE_CLRME BIT(6) /* Clear mode error flag */ ++#define LTQ_SPI_WHBSTATE_SETRUE BIT(5) /* Set receive underflow error flag */ ++#define LTQ_SPI_WHBSTATE_CLRRUE BIT(4) /* Clear receive underflow error flag */ ++#define LTQ_SPI_WHBSTATE_SETMS BIT(3) /* Set master select bit */ ++#define LTQ_SPI_WHBSTATE_CLRMS BIT(2) /* Clear master select bit */ ++#define LTQ_SPI_WHBSTATE_SETEN BIT(1) /* Set enable bit (operational mode) */ ++#define LTQ_SPI_WHBSTATE_CLREN BIT(0) /* Clear enable bit (config mode */ ++#define LTQ_SPI_WHBSTATE_CLR_ERRORS (LTQ_SPI_WHBSTATE_CLRRUE | \ ++ LTQ_SPI_WHBSTATE_CLRME | \ ++ LTQ_SPI_WHBSTATE_CLRTE | \ ++ LTQ_SPI_WHBSTATE_CLRRE | \ ++ LTQ_SPI_WHBSTATE_CLRAE | \ ++ LTQ_SPI_WHBSTATE_CLRTUE) ++ ++#define LTQ_SPI_RXFCON_RXFITL_S 8 /* FIFO interrupt trigger level */ ++#define LTQ_SPI_RXFCON_RXFITL_M (0x3F << LTQ_SPI_RXFCON_RXFITL_S) ++#define LTQ_SPI_RXFCON_RXFLU BIT(1) /* FIFO flush */ ++#define LTQ_SPI_RXFCON_RXFEN BIT(0) /* FIFO enable */ ++ ++#define LTQ_SPI_TXFCON_TXFITL_S 8 /* FIFO interrupt trigger level */ ++#define LTQ_SPI_TXFCON_TXFITL_M (0x3F << LTQ_SPI_TXFCON_TXFITL_S) ++#define LTQ_SPI_TXFCON_TXFLU BIT(1) /* FIFO flush */ ++#define LTQ_SPI_TXFCON_TXFEN BIT(0) /* FIFO enable */ ++ ++#define LTQ_SPI_FSTAT_RXFFL_S 0 ++#define LTQ_SPI_FSTAT_RXFFL_M (0x3f << LTQ_SPI_FSTAT_RXFFL_S) ++#define LTQ_SPI_FSTAT_TXFFL_S 8 ++#define LTQ_SPI_FSTAT_TXFFL_M (0x3f << LTQ_SPI_FSTAT_TXFFL_S) ++ ++#define LTQ_SPI_GPOCON_ISCSBN_S 8 ++#define LTQ_SPI_GPOCON_INVOUTN_S 0 ++ ++#define LTQ_SPI_FGPO_SETOUTN_S 8 ++#define LTQ_SPI_FGPO_CLROUTN_S 0 ++ ++#define LTQ_SPI_RXREQ_RXCNT_M 0xFFFF /* Receive count value */ ++#define LTQ_SPI_RXCNT_TODO_M 0xFFFF /* Recevie to-do value */ ++ ++#define LTQ_SPI_IRNEN_TFI BIT(4) /* TX finished interrupt */ ++#define LTQ_SPI_IRNEN_F BIT(3) /* Frame end interrupt request */ ++#define LTQ_SPI_IRNEN_E BIT(2) /* Error end interrupt request */ ++#define LTQ_SPI_IRNEN_T_XWAY BIT(1) /* Transmit end interrupt request */ ++#define LTQ_SPI_IRNEN_R_XWAY BIT(0) /* Receive end interrupt request */ ++#define LTQ_SPI_IRNEN_R_XRX BIT(1) /* Transmit end interrupt request */ ++#define LTQ_SPI_IRNEN_T_XRX BIT(0) /* Receive end interrupt request */ ++#define LTQ_SPI_IRNEN_ALL 0x1F + + struct lantiq_ssc_hwcfg { + unsigned int irnen_r; +@@ -208,16 +212,16 @@ static void lantiq_ssc_maskl(const struc + + static unsigned int tx_fifo_level(const struct lantiq_ssc_spi *spi) + { +- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); + +- return (fstat & SPI_FSTAT_TXFFL_M) >> SPI_FSTAT_TXFFL_S; ++ return (fstat & LTQ_SPI_FSTAT_TXFFL_M) >> LTQ_SPI_FSTAT_TXFFL_S; + } + + static unsigned int rx_fifo_level(const struct lantiq_ssc_spi *spi) + { +- u32 fstat = lantiq_ssc_readl(spi, SPI_FSTAT); ++ u32 fstat = lantiq_ssc_readl(spi, LTQ_SPI_FSTAT); + +- return fstat & SPI_FSTAT_RXFFL_M; ++ return fstat & LTQ_SPI_FSTAT_RXFFL_M; + } + + static unsigned int tx_fifo_free(const struct lantiq_ssc_spi *spi) +@@ -227,38 +231,38 @@ static unsigned int tx_fifo_free(const s + + static void rx_fifo_reset(const struct lantiq_ssc_spi *spi) + { +- u32 val = spi->rx_fifo_size << SPI_RXFCON_RXFITL_S; ++ u32 val = spi->rx_fifo_size << LTQ_SPI_RXFCON_RXFITL_S; + +- val |= SPI_RXFCON_RXFEN | SPI_RXFCON_RXFLU; +- lantiq_ssc_writel(spi, val, SPI_RXFCON); ++ val |= LTQ_SPI_RXFCON_RXFEN | LTQ_SPI_RXFCON_RXFLU; ++ lantiq_ssc_writel(spi, val, LTQ_SPI_RXFCON); + } + + static void tx_fifo_reset(const struct lantiq_ssc_spi *spi) + { +- u32 val = 1 << SPI_TXFCON_TXFITL_S; ++ u32 val = 1 << LTQ_SPI_TXFCON_TXFITL_S; + +- val |= SPI_TXFCON_TXFEN | SPI_TXFCON_TXFLU; +- lantiq_ssc_writel(spi, val, SPI_TXFCON); ++ val |= LTQ_SPI_TXFCON_TXFEN | LTQ_SPI_TXFCON_TXFLU; ++ lantiq_ssc_writel(spi, val, LTQ_SPI_TXFCON); + } + + static void rx_fifo_flush(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_maskl(spi, 0, SPI_RXFCON_RXFLU, SPI_RXFCON); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_RXFCON_RXFLU, LTQ_SPI_RXFCON); + } + + static void tx_fifo_flush(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_maskl(spi, 0, SPI_TXFCON_TXFLU, SPI_TXFCON); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_TXFCON_TXFLU, LTQ_SPI_TXFCON); + } + + static void hw_enter_config_mode(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_writel(spi, SPI_WHBSTATE_CLREN, SPI_WHBSTATE); ++ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_CLREN, LTQ_SPI_WHBSTATE); + } + + static void hw_enter_active_mode(const struct lantiq_ssc_spi *spi) + { +- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETEN, SPI_WHBSTATE); ++ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETEN, LTQ_SPI_WHBSTATE); + } + + static void hw_setup_speed_hz(const struct lantiq_ssc_spi *spi, +@@ -287,7 +291,7 @@ static void hw_setup_speed_hz(const stru + dev_dbg(spi->dev, "spi_clk %u, max_speed_hz %u, brt %u\n", + spi_clk, max_speed_hz, brt); + +- lantiq_ssc_writel(spi, brt, SPI_BRT); ++ lantiq_ssc_writel(spi, brt, LTQ_SPI_BRT); + } + + static void hw_setup_bits_per_word(const struct lantiq_ssc_spi *spi, +@@ -296,9 +300,9 @@ static void hw_setup_bits_per_word(const + u32 bm; + + /* CON.BM value = bits_per_word - 1 */ +- bm = (bits_per_word - 1) << SPI_CON_BM_S; ++ bm = (bits_per_word - 1) << LTQ_SPI_CON_BM_S; + +- lantiq_ssc_maskl(spi, SPI_CON_BM_M, bm, SPI_CON); ++ lantiq_ssc_maskl(spi, LTQ_SPI_CON_BM_M, bm, LTQ_SPI_CON); + } + + static void hw_setup_clock_mode(const struct lantiq_ssc_spi *spi, +@@ -315,28 +319,28 @@ static void hw_setup_clock_mode(const st + * 3 1 1 1 0 + */ + if (mode & SPI_CPHA) +- con_clr |= SPI_CON_PH; ++ con_clr |= LTQ_SPI_CON_PH; + else +- con_set |= SPI_CON_PH; ++ con_set |= LTQ_SPI_CON_PH; + + if (mode & SPI_CPOL) +- con_set |= SPI_CON_PO | SPI_CON_IDLE; ++ con_set |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; + else +- con_clr |= SPI_CON_PO | SPI_CON_IDLE; ++ con_clr |= LTQ_SPI_CON_PO | LTQ_SPI_CON_IDLE; + + /* Set heading control */ + if (mode & SPI_LSB_FIRST) +- con_clr |= SPI_CON_HB; ++ con_clr |= LTQ_SPI_CON_HB; + else +- con_set |= SPI_CON_HB; ++ con_set |= LTQ_SPI_CON_HB; + + /* Set loopback mode */ + if (mode & SPI_LOOP) +- con_set |= SPI_CON_LB; ++ con_set |= LTQ_SPI_CON_LB; + else +- con_clr |= SPI_CON_LB; ++ con_clr |= LTQ_SPI_CON_LB; + +- lantiq_ssc_maskl(spi, con_clr, con_set, SPI_CON); ++ lantiq_ssc_maskl(spi, con_clr, con_set, LTQ_SPI_CON); + } + + static void lantiq_ssc_hw_init(const struct lantiq_ssc_spi *spi) +@@ -347,37 +351,39 @@ static void lantiq_ssc_hw_init(const str + * Set clock divider for run mode to 1 to + * run at same frequency as FPI bus + */ +- lantiq_ssc_writel(spi, 1 << SPI_CLC_RMC_S, SPI_CLC); ++ lantiq_ssc_writel(spi, 1 << LTQ_SPI_CLC_RMC_S, LTQ_SPI_CLC); + + /* Put controller into config mode */ + hw_enter_config_mode(spi); + + /* Clear error flags */ +- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* Enable error checking, disable TX/RX */ +- lantiq_ssc_writel(spi, SPI_CON_RUEN | SPI_CON_AEN | SPI_CON_TEN | +- SPI_CON_REN | SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ lantiq_ssc_writel(spi, LTQ_SPI_CON_RUEN | LTQ_SPI_CON_AEN | ++ LTQ_SPI_CON_TEN | LTQ_SPI_CON_REN | LTQ_SPI_CON_TXOFF | ++ LTQ_SPI_CON_RXOFF, LTQ_SPI_CON); + + /* Setup default SPI mode */ + hw_setup_bits_per_word(spi, spi->bits_per_word); + hw_setup_clock_mode(spi, SPI_MODE_0); + + /* Enable master mode and clear error flags */ +- lantiq_ssc_writel(spi, SPI_WHBSTATE_SETMS | SPI_WHBSTATE_CLR_ERRORS, +- SPI_WHBSTATE); ++ lantiq_ssc_writel(spi, LTQ_SPI_WHBSTATE_SETMS | ++ LTQ_SPI_WHBSTATE_CLR_ERRORS, ++ LTQ_SPI_WHBSTATE); + + /* Reset GPIO/CS registers */ +- lantiq_ssc_writel(spi, 0, SPI_GPOCON); +- lantiq_ssc_writel(spi, 0xFF00, SPI_FPGO); ++ lantiq_ssc_writel(spi, 0, LTQ_SPI_GPOCON); ++ lantiq_ssc_writel(spi, 0xFF00, LTQ_SPI_FPGO); + + /* Enable and flush FIFOs */ + rx_fifo_reset(spi); + tx_fifo_reset(spi); + + /* Enable interrupts */ +- lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | SPI_IRNEN_E, +- SPI_IRNEN); ++ lantiq_ssc_writel(spi, hwcfg->irnen_t | hwcfg->irnen_r | ++ LTQ_SPI_IRNEN_E, LTQ_SPI_IRNEN); + } + + static int lantiq_ssc_setup(struct spi_device *spidev) +@@ -400,13 +406,13 @@ static int lantiq_ssc_setup(struct spi_d + } + + /* set GPO pin to CS mode */ +- gpocon = 1 << ((cs - spi->base_cs) + SPI_GPOCON_ISCSBN_S); ++ gpocon = 1 << ((cs - spi->base_cs) + LTQ_SPI_GPOCON_ISCSBN_S); + + /* invert GPO pin */ + if (spidev->mode & SPI_CS_HIGH) + gpocon |= 1 << (cs - spi->base_cs); + +- lantiq_ssc_maskl(spi, 0, gpocon, SPI_GPOCON); ++ lantiq_ssc_maskl(spi, 0, gpocon, LTQ_SPI_GPOCON); + + return 0; + } +@@ -442,18 +448,18 @@ static void hw_setup_transfer(struct lan + } + + /* Configure transmitter and receiver */ +- con = lantiq_ssc_readl(spi, SPI_CON); ++ con = lantiq_ssc_readl(spi, LTQ_SPI_CON); + if (t->tx_buf) +- con &= ~SPI_CON_TXOFF; ++ con &= ~LTQ_SPI_CON_TXOFF; + else +- con |= SPI_CON_TXOFF; ++ con |= LTQ_SPI_CON_TXOFF; + + if (t->rx_buf) +- con &= ~SPI_CON_RXOFF; ++ con &= ~LTQ_SPI_CON_RXOFF; + else +- con |= SPI_CON_RXOFF; ++ con |= LTQ_SPI_CON_RXOFF; + +- lantiq_ssc_writel(spi, con, SPI_CON); ++ lantiq_ssc_writel(spi, con, LTQ_SPI_CON); + } + + static int lantiq_ssc_unprepare_message(struct spi_master *master, +@@ -464,7 +470,8 @@ static int lantiq_ssc_unprepare_message( + flush_workqueue(spi->wq); + + /* Disable transmitter and receiver while idle */ +- lantiq_ssc_maskl(spi, 0, SPI_CON_TXOFF | SPI_CON_RXOFF, SPI_CON); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_CON_TXOFF | LTQ_SPI_CON_RXOFF, ++ LTQ_SPI_CON); + + return 0; + } +@@ -503,7 +510,7 @@ static void tx_fifo_write(struct lantiq_ + break; + } + +- lantiq_ssc_writel(spi, data, SPI_TB); ++ lantiq_ssc_writel(spi, data, LTQ_SPI_TB); + tx_free--; + } + } +@@ -517,7 +524,7 @@ static void rx_fifo_read_full_duplex(str + unsigned int rx_fill = rx_fifo_level(spi); + + while (rx_fill) { +- data = lantiq_ssc_readl(spi, SPI_RB); ++ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); + + switch (spi->bits_per_word) { + case 2 ... 8: +@@ -563,9 +570,9 @@ static void rx_fifo_read_half_duplex(str + */ + while (rx_fill) { + if (spi->rx_todo < 4) { +- rxbv = (lantiq_ssc_readl(spi, SPI_STAT) & +- SPI_STAT_RXBV_M) >> SPI_STAT_RXBV_S; +- data = lantiq_ssc_readl(spi, SPI_RB); ++ rxbv = (lantiq_ssc_readl(spi, LTQ_SPI_STAT) & ++ LTQ_SPI_STAT_RXBV_M) >> LTQ_SPI_STAT_RXBV_S; ++ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); + + shift = (rxbv - 1) * 8; + rx8 = spi->rx; +@@ -578,7 +585,7 @@ static void rx_fifo_read_half_duplex(str + spi->rx++; + } + } else { +- data = lantiq_ssc_readl(spi, SPI_RB); ++ data = lantiq_ssc_readl(spi, LTQ_SPI_RB); + rx32 = (u32 *) spi->rx; + + *rx32++ = data; +@@ -603,7 +610,7 @@ static void rx_request(struct lantiq_ssc + if (rxreq > rxreq_max) + rxreq = rxreq_max; + +- lantiq_ssc_writel(spi, rxreq, SPI_RXREQ); ++ lantiq_ssc_writel(spi, rxreq, LTQ_SPI_RXREQ); + } + + static irqreturn_t lantiq_ssc_xmit_interrupt(int irq, void *data) +@@ -642,26 +649,26 @@ completed: + static irqreturn_t lantiq_ssc_err_interrupt(int irq, void *data) + { + struct lantiq_ssc_spi *spi = data; +- u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); + +- if (!(stat & SPI_STAT_ERRORS)) ++ if (!(stat & LTQ_SPI_STAT_ERRORS)) + return IRQ_NONE; + +- if (stat & SPI_STAT_RUE) ++ if (stat & LTQ_SPI_STAT_RUE) + dev_err(spi->dev, "receive underflow error\n"); +- if (stat & SPI_STAT_TUE) ++ if (stat & LTQ_SPI_STAT_TUE) + dev_err(spi->dev, "transmit underflow error\n"); +- if (stat & SPI_STAT_AE) ++ if (stat & LTQ_SPI_STAT_AE) + dev_err(spi->dev, "abort error\n"); +- if (stat & SPI_STAT_RE) ++ if (stat & LTQ_SPI_STAT_RE) + dev_err(spi->dev, "receive overflow error\n"); +- if (stat & SPI_STAT_TE) ++ if (stat & LTQ_SPI_STAT_TE) + dev_err(spi->dev, "transmit overflow error\n"); +- if (stat & SPI_STAT_ME) ++ if (stat & LTQ_SPI_STAT_ME) + dev_err(spi->dev, "mode error\n"); + + /* Clear error flags */ +- lantiq_ssc_maskl(spi, 0, SPI_WHBSTATE_CLR_ERRORS, SPI_WHBSTATE); ++ lantiq_ssc_maskl(spi, 0, LTQ_SPI_WHBSTATE_CLR_ERRORS, LTQ_SPI_WHBSTATE); + + /* set bad status so it can be retried */ + if (spi->master->cur_msg) +@@ -721,9 +728,9 @@ static void lantiq_ssc_bussy_work(struct + + end = jiffies + msecs_to_jiffies(timeout); + do { +- u32 stat = lantiq_ssc_readl(spi, SPI_STAT); ++ u32 stat = lantiq_ssc_readl(spi, LTQ_SPI_STAT); + +- if (!(stat & SPI_STAT_BSY)) { ++ if (!(stat & LTQ_SPI_STAT_BSY)) { + spi_finalize_current_transfer(spi->master); + return; + } +@@ -755,9 +762,9 @@ static void lantiq_ssc_set_cs(struct spi + if (!!(spidev->mode & SPI_CS_HIGH) == enable) + fgpo = (1 << (cs - spi->base_cs)); + else +- fgpo = (1 << (cs - spi->base_cs + SPI_FGPO_SETOUTN_S)); ++ fgpo = (1 << (cs - spi->base_cs + LTQ_SPI_FGPO_SETOUTN_S)); + +- lantiq_ssc_writel(spi, fgpo, SPI_FPGO); ++ lantiq_ssc_writel(spi, fgpo, LTQ_SPI_FPGO); + } + + static int lantiq_ssc_transfer_one(struct spi_master *master, +@@ -772,13 +779,13 @@ static int lantiq_ssc_transfer_one(struc + } + + static const struct lantiq_ssc_hwcfg lantiq_ssc_xway = { +- .irnen_r = SPI_IRNEN_R_XWAY, +- .irnen_t = SPI_IRNEN_T_XWAY, ++ .irnen_r = LTQ_SPI_IRNEN_R_XWAY, ++ .irnen_t = LTQ_SPI_IRNEN_T_XWAY, + }; + + static const struct lantiq_ssc_hwcfg lantiq_ssc_xrx = { +- .irnen_r = SPI_IRNEN_R_XRX, +- .irnen_t = SPI_IRNEN_T_XRX, ++ .irnen_r = LTQ_SPI_IRNEN_R_XRX, ++ .irnen_t = LTQ_SPI_IRNEN_T_XRX, + }; + + static const struct of_device_id lantiq_ssc_match[] = { +@@ -814,21 +821,21 @@ static int lantiq_ssc_probe(struct platf + return -ENXIO; + } + +- rx_irq = platform_get_irq_byname(pdev, SPI_RX_IRQ_NAME); ++ rx_irq = platform_get_irq_byname(pdev, LTQ_SPI_RX_IRQ_NAME); + if (rx_irq < 0) { +- dev_err(dev, "failed to get %s\n", SPI_RX_IRQ_NAME); ++ dev_err(dev, "failed to get %s\n", LTQ_SPI_RX_IRQ_NAME); + return -ENXIO; + } + +- tx_irq = platform_get_irq_byname(pdev, SPI_TX_IRQ_NAME); ++ tx_irq = platform_get_irq_byname(pdev, LTQ_SPI_TX_IRQ_NAME); + if (tx_irq < 0) { +- dev_err(dev, "failed to get %s\n", SPI_TX_IRQ_NAME); ++ dev_err(dev, "failed to get %s\n", LTQ_SPI_TX_IRQ_NAME); + return -ENXIO; + } + +- err_irq = platform_get_irq_byname(pdev, SPI_ERR_IRQ_NAME); ++ err_irq = platform_get_irq_byname(pdev, LTQ_SPI_ERR_IRQ_NAME); + if (err_irq < 0) { +- dev_err(dev, "failed to get %s\n", SPI_ERR_IRQ_NAME); ++ dev_err(dev, "failed to get %s\n", LTQ_SPI_ERR_IRQ_NAME); + return -ENXIO; + } + +@@ -849,17 +856,17 @@ static int lantiq_ssc_probe(struct platf + } + + err = devm_request_irq(dev, rx_irq, lantiq_ssc_xmit_interrupt, +- 0, SPI_RX_IRQ_NAME, spi); ++ 0, LTQ_SPI_RX_IRQ_NAME, spi); + if (err) + goto err_master_put; + + err = devm_request_irq(dev, tx_irq, lantiq_ssc_xmit_interrupt, +- 0, SPI_TX_IRQ_NAME, spi); ++ 0, LTQ_SPI_TX_IRQ_NAME, spi); + if (err) + goto err_master_put; + + err = devm_request_irq(dev, err_irq, lantiq_ssc_err_interrupt, +- 0, SPI_ERR_IRQ_NAME, spi); ++ 0, LTQ_SPI_ERR_IRQ_NAME, spi); + if (err) + goto err_master_put; + +@@ -916,11 +923,11 @@ static int lantiq_ssc_probe(struct platf + } + INIT_WORK(&spi->work, lantiq_ssc_bussy_work); + +- id = lantiq_ssc_readl(spi, SPI_ID); +- spi->tx_fifo_size = (id & SPI_ID_TXFS_M) >> SPI_ID_TXFS_S; +- spi->rx_fifo_size = (id & SPI_ID_RXFS_M) >> SPI_ID_RXFS_S; +- supports_dma = (id & SPI_ID_CFG_M) >> SPI_ID_CFG_S; +- revision = id & SPI_ID_REV_M; ++ id = lantiq_ssc_readl(spi, LTQ_SPI_ID); ++ spi->tx_fifo_size = (id & LTQ_SPI_ID_TXFS_M) >> LTQ_SPI_ID_TXFS_S; ++ spi->rx_fifo_size = (id & LTQ_SPI_ID_RXFS_M) >> LTQ_SPI_ID_RXFS_S; ++ supports_dma = (id & LTQ_SPI_ID_CFG_M) >> LTQ_SPI_ID_CFG_S; ++ revision = id & LTQ_SPI_ID_REV_M; + + lantiq_ssc_hw_init(spi); + +@@ -952,8 +959,8 @@ static int lantiq_ssc_remove(struct plat + { + struct lantiq_ssc_spi *spi = platform_get_drvdata(pdev); + +- lantiq_ssc_writel(spi, 0, SPI_IRNEN); +- lantiq_ssc_writel(spi, 0, SPI_CLC); ++ lantiq_ssc_writel(spi, 0, LTQ_SPI_IRNEN); ++ lantiq_ssc_writel(spi, 0, LTQ_SPI_CLC); + rx_fifo_flush(spi); + tx_fifo_flush(spi); + hw_enter_config_mode(spi); diff --git a/target/linux/lantiq/patches-4.14/0101-find_active_root.patch b/target/linux/lantiq/patches-4.14/0101-find_active_root.patch new file mode 100644 index 0000000000..7232ffa416 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0101-find_active_root.patch @@ -0,0 +1,93 @@ +--- a/drivers/mtd/ofpart.c ++++ b/drivers/mtd/ofpart.c +@@ -25,6 +25,38 @@ static bool node_has_compatible(struct d + return of_get_property(pp, "compatible", NULL); + } + ++static uint8_t * brnboot_get_selected_root_part(struct mtd_info *master, ++ loff_t offset) ++{ ++ static uint8_t root_id; ++ int err, len; ++ ++ err = mtd_read(master, offset, 0x01, &len, &root_id); ++ ++ if (mtd_is_bitflip(err) || !err) ++ return &root_id; ++ ++ return NULL; ++} ++ ++static void brnboot_set_active_root_part(struct mtd_partition *pparts, ++ struct device_node **part_nodes, ++ int nr_parts, ++ uint8_t *root_id) ++{ ++ int i; ++ ++ for (i = 0; i < nr_parts; i++) { ++ int part_root_id; ++ ++ if (!of_property_read_u32(part_nodes[i], "brnboot,root-id", &part_root_id) ++ && part_root_id == *root_id) { ++ pparts[i].name = "firmware"; ++ break; ++ } ++ } ++} ++ + static int parse_ofpart_partitions(struct mtd_info *master, + const struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +@@ -36,7 +68,8 @@ static int parse_ofpart_partitions(struc + struct device_node *pp; + int nr_parts, i, ret = 0; + bool dedicated = true; +- ++ uint8_t *proot_id = NULL; ++ struct device_node **part_nodes; + + /* Pull of_node from the master device node */ + mtd_node = mtd_get_of_node(master); +@@ -72,7 +105,9 @@ static int parse_ofpart_partitions(struc + return 0; + + parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL); +- if (!parts) ++ part_nodes = kzalloc(nr_parts * sizeof(*part_nodes), GFP_KERNEL); ++ ++ if (!parts || !part_nodes) + return -ENOMEM; + + i = 0; +@@ -121,12 +156,22 @@ static int parse_ofpart_partitions(struc + if (of_get_property(pp, "lock", &len)) + parts[i].mask_flags |= MTD_POWERUP_LOCK; + ++ if (!proot_id && of_device_is_compatible(pp, "brnboot,root-selector")) ++ proot_id = brnboot_get_selected_root_part(master, parts[i].offset); ++ ++ part_nodes[i] = pp; ++ + i++; + } + + if (!nr_parts) + goto ofpart_none; + ++ if (proot_id) ++ brnboot_set_active_root_part(parts, part_nodes, nr_parts, proot_id); ++ ++ kfree(part_nodes); ++ + *pparts = parts; + return nr_parts; + +@@ -137,6 +182,7 @@ ofpart_fail: + ofpart_none: + of_node_put(pp); + kfree(parts); ++ kfree(part_nodes); + return ret; + } + diff --git a/target/linux/lantiq/patches-4.14/0151-lantiq-ifxmips_pcie-use-of.patch b/target/linux/lantiq/patches-4.14/0151-lantiq-ifxmips_pcie-use-of.patch new file mode 100644 index 0000000000..03d43c241f --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0151-lantiq-ifxmips_pcie-use-of.patch @@ -0,0 +1,166 @@ +--- a/arch/mips/pci/ifxmips_pcie.c ++++ b/arch/mips/pci/ifxmips_pcie.c +@@ -18,6 +18,9 @@ + #include <linux/pci_regs.h> + #include <linux/module.h> + ++#include <linux/of_gpio.h> ++#include <linux/of_platform.h> ++ + #include "ifxmips_pcie.h" + #include "ifxmips_pcie_reg.h" + +@@ -40,6 +43,7 @@ + static DEFINE_SPINLOCK(ifx_pcie_lock); + + u32 g_pcie_debug_flag = PCIE_MSG_ANY & (~PCIE_MSG_CFG); ++static int pcie_reset_gpio; + + static ifx_pcie_irq_t pcie_irqs[IFX_PCIE_CORE_NR] = { + { +@@ -82,6 +86,22 @@ void ifx_pcie_debug(const char *fmt, ... + printk("%s", buf); + } + ++static inline void pcie_ep_gpio_rst_init(int pcie_port) ++{ ++ gpio_direction_output(pcie_reset_gpio, 1); ++ gpio_set_value(pcie_reset_gpio, 1); ++} ++ ++static inline void pcie_device_rst_assert(int pcie_port) ++{ ++ gpio_set_value(pcie_reset_gpio, 0); ++} ++ ++static inline void pcie_device_rst_deassert(int pcie_port) ++{ ++ mdelay(100); ++ gpio_direction_output(pcie_reset_gpio, 1); ++} + + static inline int pcie_ltssm_enable(int pcie_port) + { +@@ -1045,8 +1065,9 @@ pcie_rc_initialize(int pcie_port) + return 0; + } + +-static int __init ifx_pcie_bios_init(void) ++static int ifx_pcie_bios_probe(struct platform_device *pdev) + { ++ struct device_node *node = pdev->dev.of_node; + void __iomem *io_map_base; + int pcie_port; + int startup_port; +@@ -1055,7 +1076,17 @@ static int __init ifx_pcie_bios_init(voi + pcie_ahb_pmu_setup(); + + startup_port = IFX_PCIE_PORT0; +- ++ ++ pcie_reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); ++ if (gpio_is_valid(pcie_reset_gpio)) { ++ int ret = devm_gpio_request(&pdev->dev, pcie_reset_gpio, "pcie-reset"); ++ if (ret) { ++ dev_err(&pdev->dev, "failed to request gpio %d\n", pcie_reset_gpio); ++ return ret; ++ } ++ gpio_direction_output(pcie_reset_gpio, 1); ++ } ++ + for (pcie_port = startup_port; pcie_port < IFX_PCIE_CORE_NR; pcie_port++){ + if (pcie_rc_initialize(pcie_port) == 0) { + IFX_PCIE_PRINT(PCIE_MSG_INIT, "%s: ifx_pcie_cfg_base 0x%p\n", +@@ -1067,6 +1098,7 @@ static int __init ifx_pcie_bios_init(voi + return -ENOMEM; + } + ifx_pcie_controller[pcie_port].pcic.io_map_base = (unsigned long)io_map_base; ++ pci_load_of_ranges(&ifx_pcie_controller[pcie_port].pcic, node); + + register_pci_controller(&ifx_pcie_controller[pcie_port].pcic); + /* XXX, clear error status */ +@@ -1083,6 +1115,30 @@ static int __init ifx_pcie_bios_init(voi + + return 0; + } ++ ++static const struct of_device_id ifxmips_pcie_match[] = { ++ { .compatible = "lantiq,pcie-xrx200" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ifxmips_pcie_match); ++ ++static struct platform_driver ltq_pci_driver = { ++ .probe = ifx_pcie_bios_probe, ++ .driver = { ++ .name = "pcie-xrx200", ++ .owner = THIS_MODULE, ++ .of_match_table = ifxmips_pcie_match, ++ }, ++}; ++ ++int __init ifx_pcie_bios_init(void) ++{ ++ int ret = platform_driver_register(<q_pci_driver); ++ if (ret) ++ pr_info("pcie-xrx200: Error registering platform driver!"); ++ return ret; ++} ++ + arch_initcall(ifx_pcie_bios_init); + + MODULE_LICENSE("GPL"); +--- a/arch/mips/pci/ifxmips_pcie_vr9.h ++++ b/arch/mips/pci/ifxmips_pcie_vr9.h +@@ -22,8 +22,6 @@ + #include <linux/gpio.h> + #include <lantiq_soc.h> + +-#define IFX_PCIE_GPIO_RESET 494 +- + #define IFX_REG_R32 ltq_r32 + #define IFX_REG_W32 ltq_w32 + #define CONFIG_IFX_PCIE_HW_SWAP +@@ -53,21 +51,6 @@ + #define OUT ((volatile u32*)(IFX_GPIO + 0x0070)) + + +-static inline void pcie_ep_gpio_rst_init(int pcie_port) +-{ +- +- gpio_request(IFX_PCIE_GPIO_RESET, "pcie-reset"); +- gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); +- gpio_set_value(IFX_PCIE_GPIO_RESET, 1); +- +-/* ifx_gpio_pin_reserve(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +- ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +- ifx_gpio_dir_out_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +- ifx_gpio_altsel0_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +- ifx_gpio_altsel1_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +- ifx_gpio_open_drain_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id);*/ +-} +- + static inline void pcie_ahb_pmu_setup(void) + { + /* Enable AHB bus master/slave */ +@@ -180,20 +163,6 @@ static inline void pcie_phy_rst_deassert + IFX_REG_W32(reg, IFX_RCU_RST_REQ); + } + +-static inline void pcie_device_rst_assert(int pcie_port) +-{ +- gpio_set_value(IFX_PCIE_GPIO_RESET, 0); +-// ifx_gpio_output_clear(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +-} +- +-static inline void pcie_device_rst_deassert(int pcie_port) +-{ +- mdelay(100); +- gpio_direction_output(IFX_PCIE_GPIO_RESET, 1); +-// gpio_set_value(IFX_PCIE_GPIO_RESET, 1); +- //ifx_gpio_output_set(IFX_PCIE_GPIO_RESET, ifx_pcie_gpio_module_id); +-} +- + static inline void pcie_core_pmu_setup(int pcie_port) + { + struct clk *clk; diff --git a/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch new file mode 100644 index 0000000000..7b14d9e5a9 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0152-lantiq-VPE.patch @@ -0,0 +1,180 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -2320,6 +2320,12 @@ config MIPS_VPE_LOADER + Includes a loader for loading an elf relocatable object + onto another VPE and running it. + ++config IFX_VPE_EXT ++ bool "IFX APRP Extensions" ++ depends on MIPS_VPE_LOADER ++ help ++ IFX included extensions in APRP ++ + config MIPS_VPE_LOADER_CMP + bool + default "y" +--- a/arch/mips/include/asm/vpe.h ++++ b/arch/mips/include/asm/vpe.h +@@ -127,4 +127,13 @@ void cleanup_tc(struct tc *tc); + + int __init vpe_module_init(void); + void __exit vpe_module_exit(void); ++ ++/* For the explanation of the APIs please refer the section "MT APRP Kernel ++ * Programming" in AR9 SW Architecture Specification ++ */ ++int32_t vpe1_sw_start(void *sw_start_addr, uint32_t tcmask, uint32_t flags); ++int32_t vpe1_sw_stop(uint32_t flags); ++uint32_t vpe1_get_load_addr(uint32_t flags); ++uint32_t vpe1_get_max_mem(uint32_t flags); ++ + #endif /* _ASM_VPE_H */ +--- a/arch/mips/kernel/vpe-mt.c ++++ b/arch/mips/kernel/vpe-mt.c +@@ -29,6 +29,7 @@ int vpe_run(struct vpe *v) + struct vpe_notifications *notifier; + unsigned int vpeflags; + struct tc *t; ++ unsigned long physical_memsize = 0L; + + /* check we are the Master VPE */ + local_irq_save(flags); +@@ -417,6 +418,8 @@ int __init vpe_module_init(void) + } + + v->ntcs = hw_tcs - aprp_cpu_index(); ++ write_tc_c0_tcbind((read_tc_c0_tcbind() & ++ ~TCBIND_CURVPE) | 1); + + /* add the tc to the list of this vpe's tc's. */ + list_add(&t->tc, &v->tc); +@@ -519,3 +522,47 @@ void __exit vpe_module_exit(void) + release_vpe(v); + } + } ++ ++#ifdef CONFIG_IFX_VPE_EXT ++int32_t vpe1_sw_start(void *sw_start_addr, uint32_t tcmask, uint32_t flags) ++{ ++ enum vpe_state state; ++ struct vpe *v = get_vpe(tclimit); ++ struct vpe_notifications *not; ++ ++ if (tcmask || flags) { ++ pr_warn("Currently tcmask and flags should be 0. Other values are not supported\n"); ++ return -1; ++ } ++ ++ state = xchg(&v->state, VPE_STATE_INUSE); ++ if (state != VPE_STATE_UNUSED) { ++ vpe_stop(v); ++ ++ list_for_each_entry(not, &v->notify, list) { ++ not->stop(tclimit); ++ } ++ } ++ ++ v->__start = (unsigned long)sw_start_addr; ++ ++ if (!vpe_run(v)) { ++ pr_debug("VPE loader: VPE1 running successfully\n"); ++ return 0; ++ } ++ return -1; ++} ++EXPORT_SYMBOL(vpe1_sw_start); ++ ++int32_t vpe1_sw_stop(uint32_t flags) ++{ ++ struct vpe *v = get_vpe(tclimit); ++ ++ if (!vpe_free(v)) { ++ pr_debug("RP Stopped\n"); ++ return 0; ++ } else ++ return -1; ++} ++EXPORT_SYMBOL(vpe1_sw_stop); ++#endif +--- a/arch/mips/kernel/vpe.c ++++ b/arch/mips/kernel/vpe.c +@@ -49,6 +49,41 @@ struct vpe_control vpecontrol = { + .tc_list = LIST_HEAD_INIT(vpecontrol.tc_list) + }; + ++#ifdef CONFIG_IFX_VPE_EXT ++unsigned int vpe1_load_addr; ++ ++static int __init load_address(char *str) ++{ ++ get_option(&str, &vpe1_load_addr); ++ return 1; ++} ++__setup("vpe1_load_addr=", load_address); ++ ++static unsigned int vpe1_mem; ++static int __init vpe1mem(char *str) ++{ ++ vpe1_mem = memparse(str, &str); ++ return 1; ++} ++__setup("vpe1_mem=", vpe1mem); ++ ++uint32_t vpe1_get_load_addr(uint32_t flags) ++{ ++ return vpe1_load_addr; ++} ++EXPORT_SYMBOL(vpe1_get_load_addr); ++ ++uint32_t vpe1_get_max_mem(uint32_t flags) ++{ ++ if (!vpe1_mem) ++ return P_SIZE; ++ else ++ return vpe1_mem; ++} ++EXPORT_SYMBOL(vpe1_get_max_mem); ++ ++#endif ++ + /* get the vpe associated with this minor */ + struct vpe *get_vpe(int minor) + { +--- a/arch/mips/lantiq/prom.c ++++ b/arch/mips/lantiq/prom.c +@@ -31,10 +31,14 @@ EXPORT_SYMBOL_GPL(ebu_lock); + */ + static struct ltq_soc_info soc_info; + ++/* for Multithreading (APRP), vpe.c will use it */ ++unsigned long cp0_memsize; ++ + const char *get_system_type(void) + { + return soc_info.sys_type; + } ++EXPORT_SYMBOL(ltq_soc_type); + + int ltq_soc_type(void) + { +--- a/arch/mips/include/asm/mipsmtregs.h ++++ b/arch/mips/include/asm/mipsmtregs.h +@@ -31,6 +31,9 @@ + #define read_c0_vpeconf1() __read_32bit_c0_register($1, 3) + #define write_c0_vpeconf1(val) __write_32bit_c0_register($1, 3, val) + ++#define read_c0_vpeopt() __read_32bit_c0_register($1, 7) ++#define write_c0_vpeopt(val) __write_32bit_c0_register($1, 7, val) ++ + #define read_c0_tcstatus() __read_32bit_c0_register($2, 1) + #define write_c0_tcstatus(val) __write_32bit_c0_register($2, 1, val) + +@@ -376,6 +379,8 @@ do { \ + #define write_vpe_c0_vpeconf0(val) mttc0(1, 2, val) + #define read_vpe_c0_vpeconf1() mftc0(1, 3) + #define write_vpe_c0_vpeconf1(val) mttc0(1, 3, val) ++#define read_vpe_c0_vpeopt() mftc0(1, 7) ++#define write_vpe_c0_vpeopt(val) mttc0(1, 7, val) + #define read_vpe_c0_count() mftc0(9, 0) + #define write_vpe_c0_count(val) mttc0(9, 0, val) + #define read_vpe_c0_status() mftc0(12, 0) diff --git a/target/linux/lantiq/patches-4.14/0154-lantiq-pci-bar11mask-fix.patch b/target/linux/lantiq/patches-4.14/0154-lantiq-pci-bar11mask-fix.patch new file mode 100644 index 0000000000..d0acd4bb10 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0154-lantiq-pci-bar11mask-fix.patch @@ -0,0 +1,22 @@ +--- a/arch/mips/pci/pci-lantiq.c ++++ b/arch/mips/pci/pci-lantiq.c +@@ -61,6 +61,8 @@ + #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) + #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) + ++extern u32 max_low_pfn; ++ + __iomem void *ltq_pci_mapped_cfg; + static __iomem void *ltq_pci_membase; + +@@ -86,8 +88,8 @@ static inline u32 ltq_calc_bar11mask(voi + u32 mem, bar11mask; + + /* BAR11MASK value depends on available memory on system. */ +- mem = get_num_physpages() * PAGE_SIZE; +- bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; ++ mem = max_low_pfn << PAGE_SHIFT; ++ bar11mask = ((-roundup_pow_of_two(mem)) & 0x0F000000) | 8; + + return bar11mask; + } diff --git a/target/linux/lantiq/patches-4.14/0155-lantiq-VPE-nosmp.patch b/target/linux/lantiq/patches-4.14/0155-lantiq-VPE-nosmp.patch new file mode 100644 index 0000000000..898c2d4821 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0155-lantiq-VPE-nosmp.patch @@ -0,0 +1,14 @@ +--- a/arch/mips/kernel/vpe-mt.c ++++ b/arch/mips/kernel/vpe-mt.c +@@ -132,7 +132,10 @@ int vpe_run(struct vpe *v) + * kernels need to turn it on, even if that wasn't the pre-dvpe() state. + */ + #ifdef CONFIG_SMP +- evpe(vpeflags); ++ if (!setup_max_cpus) /* nosmp is set */ ++ evpe(EVPE_ENABLE); ++ else ++ evpe(vpeflags); + #else + evpe(EVPE_ENABLE); + #endif diff --git a/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch b/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch new file mode 100644 index 0000000000..fd8b7b8923 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0160-owrt-lantiq-multiple-flash.patch @@ -0,0 +1,221 @@ +--- a/drivers/mtd/maps/lantiq-flash.c ++++ b/drivers/mtd/maps/lantiq-flash.c +@@ -19,6 +19,7 @@ + #include <linux/mtd/cfi.h> + #include <linux/platform_device.h> + #include <linux/mtd/physmap.h> ++#include <linux/mtd/concat.h> + #include <linux/of.h> + + #include <lantiq_soc.h> +@@ -38,13 +39,16 @@ enum { + LTQ_NOR_NORMAL + }; + ++#define MAX_RESOURCES 4 ++ + struct ltq_mtd { +- struct resource *res; +- struct mtd_info *mtd; +- struct map_info *map; ++ struct mtd_info *mtd[MAX_RESOURCES]; ++ struct mtd_info *cmtd; ++ struct map_info map[MAX_RESOURCES]; + }; + + static const char ltq_map_name[] = "ltq_nor"; ++static const char * const ltq_probe_types[] = { "cmdlinepart", "ofpart", NULL }; + + static map_word + ltq_read16(struct map_info *map, unsigned long adr) +@@ -108,11 +112,43 @@ ltq_copy_to(struct map_info *map, unsign + } + + static int ++ltq_mtd_remove(struct platform_device *pdev) ++{ ++ struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); ++ int i; ++ ++ if (ltq_mtd == NULL) ++ return 0; ++ ++ if (ltq_mtd->cmtd) { ++ mtd_device_unregister(ltq_mtd->cmtd); ++ if (ltq_mtd->cmtd != ltq_mtd->mtd[0]) ++ mtd_concat_destroy(ltq_mtd->cmtd); ++ } ++ ++ for (i = 0; i < MAX_RESOURCES; i++) { ++ if (ltq_mtd->mtd[i] != NULL) ++ map_destroy(ltq_mtd->mtd[i]); ++ } ++ ++ kfree(ltq_mtd); ++ ++ return 0; ++} ++ ++static int + ltq_mtd_probe(struct platform_device *pdev) + { + struct ltq_mtd *ltq_mtd; + struct cfi_private *cfi; +- int err; ++ int err = 0; ++ int i; ++ int devices_found = 0; ++ ++ static const char *rom_probe_types[] = { ++ "cfi_probe", "jedec_probe", NULL ++ }; ++ const char **type; + + if (of_machine_is_compatible("lantiq,falcon") && + (ltq_boot_select() != BS_FLASH)) { +@@ -126,75 +162,89 @@ ltq_mtd_probe(struct platform_device *pd + + platform_set_drvdata(pdev, ltq_mtd); + +- ltq_mtd->res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +- if (!ltq_mtd->res) { +- dev_err(&pdev->dev, "failed to get memory resource\n"); +- return -ENOENT; ++ for (i = 0; i < pdev->num_resources; i++) { ++ printk(KERN_NOTICE "lantiq nor flash device: %.8llx at %.8llx\n", ++ (unsigned long long)resource_size(&pdev->resource[i]), ++ (unsigned long long)pdev->resource[i].start); ++ ++ if (!devm_request_mem_region(&pdev->dev, ++ pdev->resource[i].start, ++ resource_size(&pdev->resource[i]), ++ dev_name(&pdev->dev))) { ++ dev_err(&pdev->dev, "Could not reserve memory region\n"); ++ return -ENOMEM; ++ } ++ ++ ltq_mtd->map[i].name = ltq_map_name; ++ ltq_mtd->map[i].bankwidth = 2; ++ ltq_mtd->map[i].read = ltq_read16; ++ ltq_mtd->map[i].write = ltq_write16; ++ ltq_mtd->map[i].copy_from = ltq_copy_from; ++ ltq_mtd->map[i].copy_to = ltq_copy_to; ++ ++ if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) ++ ltq_mtd->map[i].phys = NO_XIP; ++ else ++ ltq_mtd->map[i].phys = pdev->resource[i].start; ++ ltq_mtd->map[i].size = resource_size(&pdev->resource[i]); ++ ltq_mtd->map[i].virt = devm_ioremap(&pdev->dev, pdev->resource[i].start, ++ ltq_mtd->map[i].size); ++ if (IS_ERR(ltq_mtd->map[i].virt)) ++ return PTR_ERR(ltq_mtd->map[i].virt); ++ ++ if (ltq_mtd->map[i].virt == NULL) { ++ dev_err(&pdev->dev, "Failed to ioremap flash region\n"); ++ err = PTR_ERR(ltq_mtd->map[i].virt); ++ goto err_out; ++ } ++ ++ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_PROBING; ++ for (type = rom_probe_types; !ltq_mtd->mtd[i] && *type; type++) ++ ltq_mtd->mtd[i] = do_map_probe(*type, <q_mtd->map[i]); ++ ltq_mtd->map[i].map_priv_1 = LTQ_NOR_NORMAL; ++ ++ if (!ltq_mtd->mtd[i]) { ++ dev_err(&pdev->dev, "probing failed\n"); ++ return -ENXIO; ++ } else { ++ devices_found++; ++ } ++ ++ ltq_mtd->mtd[i]->owner = THIS_MODULE; ++ ltq_mtd->mtd[i]->dev.parent = &pdev->dev; ++ ++ cfi = ltq_mtd->map[i].fldrv_priv; ++ cfi->addr_unlock1 ^= 1; ++ cfi->addr_unlock2 ^= 1; + } + +- ltq_mtd->map = devm_kzalloc(&pdev->dev, sizeof(struct map_info), +- GFP_KERNEL); +- if (!ltq_mtd->map) +- return -ENOMEM; ++ if (devices_found == 1) { ++ ltq_mtd->cmtd = ltq_mtd->mtd[0]; ++ } else if (devices_found > 1) { ++ /* ++ * We detected multiple devices. Concatenate them together. ++ */ ++ ltq_mtd->cmtd = mtd_concat_create(ltq_mtd->mtd, devices_found, dev_name(&pdev->dev)); ++ if (ltq_mtd->cmtd == NULL) ++ err = -ENXIO; ++ } + +- if (of_find_property(pdev->dev.of_node, "lantiq,noxip", NULL)) +- ltq_mtd->map->phys = NO_XIP; +- else +- ltq_mtd->map->phys = ltq_mtd->res->start; +- ltq_mtd->res->start; +- ltq_mtd->map->size = resource_size(ltq_mtd->res); +- ltq_mtd->map->virt = devm_ioremap_resource(&pdev->dev, ltq_mtd->res); +- if (IS_ERR(ltq_mtd->map->virt)) +- return PTR_ERR(ltq_mtd->map->virt); +- +- ltq_mtd->map->name = ltq_map_name; +- ltq_mtd->map->bankwidth = 2; +- ltq_mtd->map->read = ltq_read16; +- ltq_mtd->map->write = ltq_write16; +- ltq_mtd->map->copy_from = ltq_copy_from; +- ltq_mtd->map->copy_to = ltq_copy_to; +- +- ltq_mtd->map->map_priv_1 = LTQ_NOR_PROBING; +- ltq_mtd->mtd = do_map_probe("cfi_probe", ltq_mtd->map); +- ltq_mtd->map->map_priv_1 = LTQ_NOR_NORMAL; +- +- if (!ltq_mtd->mtd) { +- dev_err(&pdev->dev, "probing failed\n"); +- return -ENXIO; +- } +- +- ltq_mtd->mtd->dev.parent = &pdev->dev; +- mtd_set_of_node(ltq_mtd->mtd, pdev->dev.of_node); +- +- cfi = ltq_mtd->map->fldrv_priv; +- cfi->addr_unlock1 ^= 1; +- cfi->addr_unlock2 ^= 1; ++ ltq_mtd->cmtd->dev.parent = &pdev->dev; ++ mtd_set_of_node(ltq_mtd->cmtd, pdev->dev.of_node); + +- err = mtd_device_register(ltq_mtd->mtd, NULL, 0); ++ err = mtd_device_register(ltq_mtd->cmtd, NULL, 0); + if (err) { + dev_err(&pdev->dev, "failed to add partitions\n"); +- goto err_destroy; ++ goto err_out; + } + + return 0; + +-err_destroy: +- map_destroy(ltq_mtd->mtd); ++err_out: ++ ltq_mtd_remove(pdev); + return err; + } + +-static int +-ltq_mtd_remove(struct platform_device *pdev) +-{ +- struct ltq_mtd *ltq_mtd = platform_get_drvdata(pdev); +- +- if (ltq_mtd && ltq_mtd->mtd) { +- mtd_device_unregister(ltq_mtd->mtd); +- map_destroy(ltq_mtd->mtd); +- } +- return 0; +-} +- + static const struct of_device_id ltq_mtd_match[] = { + { .compatible = "lantiq,nor" }, + {}, diff --git a/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch b/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch new file mode 100644 index 0000000000..234a2527fc --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0170-MIPS-lantiq-lock-DMA-register-accesses-for-SMP.patch @@ -0,0 +1,152 @@ +From 58078a30038b578c26c532545448fe3746648390 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens <hauke@hauke-m.de> +Date: Thu, 29 Dec 2016 21:02:57 +0100 +Subject: [PATCH] MIPS: lantiq: lock DMA register accesses for SMP + +The DMA controller channel and port configuration is changed by +selecting the port or channel in one register and then update the +configuration in other registers. This has to be done in an atomic +operation. Previously only the local interrupts were deactivated which +works for single CPU systems. If the system supports SMP a better +locking is needed, use spinlocks instead. +On more recent SoCs (at least xrx200 and later) there are two memory +regions to change the configuration, there we could use one area for +each CPU and do not have to synchronize between the CPUs and more. + +Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> +--- + arch/mips/lantiq/xway/dma.c | 38 ++++++++++++++++++++------------------ + 1 file changed, 20 insertions(+), 18 deletions(-) + +--- a/arch/mips/lantiq/xway/dma.c ++++ b/arch/mips/lantiq/xway/dma.c +@@ -20,6 +20,7 @@ + #include <linux/io.h> + #include <linux/dma-mapping.h> + #include <linux/module.h> ++#include <linux/spinlock.h> + #include <linux/clk.h> + #include <linux/err.h> + +@@ -59,16 +60,17 @@ + ltq_dma_membase + (z)) + + static void __iomem *ltq_dma_membase; ++static DEFINE_SPINLOCK(ltq_dma_lock); + + void + ltq_dma_enable_irq(struct ltq_dma_channel *ch) + { + unsigned long flags; + +- local_irq_save(flags); ++ spin_lock_irqsave(<q_dma_lock, flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); +- local_irq_restore(flags); ++ spin_unlock_irqrestore(<q_dma_lock, flags); + } + EXPORT_SYMBOL_GPL(ltq_dma_enable_irq); + +@@ -77,10 +79,10 @@ ltq_dma_disable_irq(struct ltq_dma_chann + { + unsigned long flags; + +- local_irq_save(flags); ++ spin_lock_irqsave(<q_dma_lock, flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); +- local_irq_restore(flags); ++ spin_unlock_irqrestore(<q_dma_lock, flags); + } + EXPORT_SYMBOL_GPL(ltq_dma_disable_irq); + +@@ -89,10 +91,10 @@ ltq_dma_ack_irq(struct ltq_dma_channel * + { + unsigned long flags; + +- local_irq_save(flags); ++ spin_lock_irqsave(<q_dma_lock, flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32(DMA_IRQ_ACK, LTQ_DMA_CIS); +- local_irq_restore(flags); ++ spin_unlock_irqrestore(<q_dma_lock, flags); + } + EXPORT_SYMBOL_GPL(ltq_dma_ack_irq); + +@@ -101,11 +103,11 @@ ltq_dma_open(struct ltq_dma_channel *ch) + { + unsigned long flag; + +- local_irq_save(flag); ++ spin_lock_irqsave(<q_dma_lock, flag); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(0, DMA_CHAN_ON, LTQ_DMA_CCTRL); +- ltq_dma_enable_irq(ch); +- local_irq_restore(flag); ++ ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); ++ spin_unlock_irqrestore(<q_dma_lock, flag); + } + EXPORT_SYMBOL_GPL(ltq_dma_open); + +@@ -114,11 +116,11 @@ ltq_dma_close(struct ltq_dma_channel *ch + { + unsigned long flag; + +- local_irq_save(flag); ++ spin_lock_irqsave(<q_dma_lock, flag); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32_mask(DMA_CHAN_ON, 0, LTQ_DMA_CCTRL); +- ltq_dma_disable_irq(ch); +- local_irq_restore(flag); ++ ltq_dma_w32_mask(1 << ch->nr, 0, LTQ_DMA_IRNEN); ++ spin_unlock_irqrestore(<q_dma_lock, flag); + } + EXPORT_SYMBOL_GPL(ltq_dma_close); + +@@ -133,7 +135,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch + &ch->phys, GFP_ATOMIC); + memset(ch->desc_base, 0, LTQ_DESC_NUM * LTQ_DESC_SIZE); + +- local_irq_save(flags); ++ spin_lock_irqsave(<q_dma_lock, flags); + ltq_dma_w32(ch->nr, LTQ_DMA_CS); + ltq_dma_w32(ch->phys, LTQ_DMA_CDBA); + ltq_dma_w32(LTQ_DESC_NUM, LTQ_DMA_CDLEN); +@@ -142,7 +144,7 @@ ltq_dma_alloc(struct ltq_dma_channel *ch + ltq_dma_w32_mask(0, DMA_CHAN_RST, LTQ_DMA_CCTRL); + while (ltq_dma_r32(LTQ_DMA_CCTRL) & DMA_CHAN_RST) + ; +- local_irq_restore(flags); ++ spin_unlock_irqrestore(<q_dma_lock, flags); + } + + void +@@ -152,11 +154,11 @@ ltq_dma_alloc_tx(struct ltq_dma_channel + + ltq_dma_alloc(ch); + +- local_irq_save(flags); ++ spin_lock_irqsave(<q_dma_lock, flags); + ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + ltq_dma_w32(DMA_WEIGHT | DMA_TX, LTQ_DMA_CCTRL); +- local_irq_restore(flags); ++ spin_unlock_irqrestore(<q_dma_lock, flags); + } + EXPORT_SYMBOL_GPL(ltq_dma_alloc_tx); + +@@ -167,11 +169,11 @@ ltq_dma_alloc_rx(struct ltq_dma_channel + + ltq_dma_alloc(ch); + +- local_irq_save(flags); ++ spin_lock_irqsave(<q_dma_lock, flags); + ltq_dma_w32(DMA_DESCPT, LTQ_DMA_CIE); + ltq_dma_w32_mask(0, 1 << ch->nr, LTQ_DMA_IRNEN); + ltq_dma_w32(DMA_WEIGHT, LTQ_DMA_CCTRL); +- local_irq_restore(flags); ++ spin_unlock_irqrestore(<q_dma_lock, flags); + } + EXPORT_SYMBOL_GPL(ltq_dma_alloc_rx); + diff --git a/target/linux/lantiq/patches-4.14/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch b/target/linux/lantiq/patches-4.14/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch new file mode 100644 index 0000000000..d153c521d3 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0300-MTD-cfi-cmdset-0001-disable-buffered-writes.patch @@ -0,0 +1,11 @@ +--- a/drivers/mtd/chips/cfi_cmdset_0001.c ++++ b/drivers/mtd/chips/cfi_cmdset_0001.c +@@ -39,7 +39,7 @@ + /* #define CMDSET0001_DISABLE_WRITE_SUSPEND */ + + // debugging, turns off buffer write mode if set to 1 +-#define FORCE_WORD_WRITE 0 ++#define FORCE_WORD_WRITE 1 + + /* Intel chips */ + #define I82802AB 0x00ad diff --git a/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch b/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch new file mode 100644 index 0000000000..e42aaf9c07 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0301-xrx200-add-gphy-clk-src-device-tree-binding.patch @@ -0,0 +1,30 @@ +--- a/arch/mips/lantiq/xway/sysctrl.c ++++ b/arch/mips/lantiq/xway/sysctrl.c +@@ -442,6 +442,20 @@ static void clkdev_add_clkout(void) + } + } + ++static void set_phy_clock_source(struct device_node *np_cgu) ++{ ++ u32 phy_clk_src, ifcc; ++ ++ if (!np_cgu) ++ return; ++ ++ if (of_property_read_u32(np_cgu, "lantiq,phy-clk-src", &phy_clk_src)) ++ return; ++ ++ ifcc = ltq_cgu_r32(ifccr) & ~(0x1c); ++ ltq_cgu_w32(ifcc | (phy_clk_src << 2), ifccr); ++} ++ + /* bring up all register ranges that we need for basic system control */ + void __init ltq_soc_init(void) + { +@@ -628,4 +642,6 @@ void __init ltq_soc_init(void) + if (of_machine_is_compatible("lantiq,vr9")) + xbar_fpi_burst_disable(); + usb_set_clock(); ++ ++ set_phy_clock_source(np_cgu); + } diff --git a/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch b/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch new file mode 100644 index 0000000000..7e0051e668 --- /dev/null +++ b/target/linux/lantiq/patches-4.14/0302-xrx200-add-sensors-driver.patch @@ -0,0 +1,184 @@ +--- a/drivers/hwmon/Makefile ++++ b/drivers/hwmon/Makefile +@@ -109,6 +109,7 @@ obj-$(CONFIG_SENSORS_LTC4222) += ltc4222 + obj-$(CONFIG_SENSORS_LTC4245) += ltc4245.o + obj-$(CONFIG_SENSORS_LTC4260) += ltc4260.o + obj-$(CONFIG_SENSORS_LTC4261) += ltc4261.o ++obj-$(CONFIG_SENSORS_LTQ_CPUTEMP) += ltq-cputemp.o + obj-$(CONFIG_SENSORS_MAX1111) += max1111.o + obj-$(CONFIG_SENSORS_MAX16065) += max16065.o + obj-$(CONFIG_SENSORS_MAX1619) += max1619.o +--- a/drivers/hwmon/Kconfig ++++ b/drivers/hwmon/Kconfig +@@ -780,6 +780,14 @@ config SENSORS_LTC4261 + This driver can also be built as a module. If so, the module will + be called ltc4261. + ++config SENSORS_LTQ_CPUTEMP ++ bool "Lantiq CPU temperature sensor" ++ depends on LANTIQ ++ default n ++ help ++ If you say yes here you get support for the temperature ++ sensor inside your CPU. ++ + config SENSORS_MAX1111 + tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" + depends on SPI_MASTER +--- /dev/null ++++ b/drivers/hwmon/ltq-cputemp.c +@@ -0,0 +1,154 @@ ++/* Lantiq CPU Temperatur sensor driver for xrx200 ++ * ++ * Copyright (C) 2016 Florian Eckert <feckert@tdt.de> ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version ++ * ++ * This program is distributed in the hope that it will be useful ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, see <http://www.gnu.org/licenses/> ++ */ ++ ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/delay.h> ++#include <linux/of_device.h> ++#include <linux/hwmon.h> ++#include <linux/hwmon-sysfs.h> ++ ++#include <lantiq_soc.h> ++ ++/* gphy1 configuration register contains cpu temperature */ ++#define CGU_GPHY1_CR 0x0040 ++#define CGU_TEMP_PD BIT(19) ++ ++static void ltq_cputemp_enable(void) ++{ ++ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) | CGU_TEMP_PD, CGU_GPHY1_CR); ++ ++ /* wait a short moment to let the SoC get the first temperatur value */ ++ mdelay(100); ++} ++ ++static void ltq_cputemp_disable(void) ++{ ++ ltq_cgu_w32(ltq_cgu_r32(CGU_GPHY1_CR) & ~CGU_TEMP_PD, CGU_GPHY1_CR); ++} ++ ++static int ltq_cputemp_read(void) ++{ ++ int value; ++ ++ /* get the temperature including one decimal place */ ++ value = (ltq_cgu_r32(CGU_GPHY1_CR) >> 9) & 0x01FF; ++ value = (value << 2 ) + value; ++ ++ /* range -38 to +154 °C, register value zero is -38.0 °C */ ++ value -= 380; ++ ++ return value; ++} ++ ++static ssize_t show_cputemp(struct device *dev, ++ struct device_attribute *attr, char *buf) ++{ ++ int value; ++ ++ value = ltq_cputemp_read(); ++ /* scale temp to millidegree */ ++ value = value * 100; ++ ++ return sprintf(buf, "%d\n", value); ++} ++ ++static DEVICE_ATTR(temp1_input, S_IRUGO, show_cputemp, NULL); ++ ++static struct attribute *ltq_cputemp_attrs[] = { ++ &dev_attr_temp1_input.attr, ++ NULL ++}; ++ ++ATTRIBUTE_GROUPS(ltq_cputemp); ++ ++static int ltq_cputemp_probe(struct platform_device *pdev) ++{ ++ int value = 0; ++ int ret; ++ struct device *hwmon_dev; ++ ++ /* available on vr9 v1.2 SoCs only */ ++ if (ltq_soc_type() != SOC_TYPE_VR9_2) ++ return -ENODEV; ++ ++ hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev, ++ "CPU0", ++ NULL, ++ ltq_cputemp_groups); ++ ++ if (IS_ERR(hwmon_dev)) { ++ dev_err(&pdev->dev, "Failed to register as hwmon device"); ++ ret = PTR_ERR(hwmon_dev); ++ goto error_hwmon; ++ } ++ ++ ltq_cputemp_enable(); ++ value = ltq_cputemp_read(); ++ dev_info(&pdev->dev, "Current CPU die temperature: %d.%d °C", value / 10, value % 10); ++ ++ return 0; ++ ++error_hwmon: ++ return ret; ++} ++ ++static int ltq_cputemp_release(struct platform_device *pdev) ++{ ++ hwmon_device_unregister(&pdev->dev); ++ ltq_cputemp_disable(); ++ return 0; ++} ++ ++const struct of_device_id ltq_cputemp_match[] = { ++ { .compatible = "lantiq,cputemp" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, ltq_cputemp_match); ++ ++static struct platform_driver ltq_cputemp_driver = { ++ .probe = ltq_cputemp_probe, ++ .remove = ltq_cputemp_release, ++ .driver = { ++ .name = "ltq-cputemp", ++ .owner = THIS_MODULE, ++ .of_match_table = ltq_cputemp_match, ++ }, ++}; ++ ++int __init init_ltq_cputemp(void) ++{ ++ int ret; ++ ++ ret = platform_driver_register(<q_cputemp_driver); ++ return ret; ++} ++ ++void clean_ltq_cputemp(void) ++{ ++ platform_driver_unregister(<q_cputemp_driver); ++ return; ++} ++ ++module_init(init_ltq_cputemp); ++module_exit(clean_ltq_cputemp); ++ ++MODULE_AUTHOR("Florian Eckert <feckert@tdt.de>"); ++ ++MODULE_DESCRIPTION("Lantiq Temperature Sensor"); ++MODULE_LICENSE("GPL"); diff --git a/target/linux/lantiq/xrx200/config-4.14 b/target/linux/lantiq/xrx200/config-4.14 new file mode 100644 index 0000000000..73ccaf34ab --- /dev/null +++ b/target/linux/lantiq/xrx200/config-4.14 @@ -0,0 +1,90 @@ +CONFIG_ADM6996_PHY=y +CONFIG_AR8216_PHY=y +CONFIG_AT803X_PHY=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CPU_MIPSR2_IRQ_EI=y +CONFIG_CPU_MIPSR2_IRQ_VI=y +CONFIG_CPU_RMAP=y +CONFIG_CRC16=y +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y +CONFIG_CRYPTO_NULL2=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_HWMON=y +CONFIG_ICPLUS_PHY=y +CONFIG_IFX_VPE_EXT=y +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_POLLDEV=y +CONFIG_INTEL_XWAY_PHY=y +# CONFIG_ISDN is not set +CONFIG_LANTIQ_XRX200=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MIPS_MT=y +# CONFIG_MIPS_MT_FPAFF is not set +CONFIG_MIPS_MT_SMP=y +CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y +CONFIG_MIPS_VPE_APSP_API=y +CONFIG_MIPS_VPE_APSP_API_MT=y +CONFIG_MIPS_VPE_LOADER=y +CONFIG_MIPS_VPE_LOADER_MT=y +CONFIG_MIPS_VPE_LOADER_TOM=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_NAND_XWAY=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_NET_FLOW_LIMIT=y +CONFIG_NLS=y +CONFIG_NR_CPUS=2 +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PADATA=y +CONFIG_PCI=y +CONFIG_PCIE_LANTIQ=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LANTIQ=y +CONFIG_POWER_RESET=y +CONFIG_POWER_RESET_GPIO=y +CONFIG_POWER_SUPPLY=y +CONFIG_RCU_STALL_COMMON=y +CONFIG_RFS_ACCEL=y +CONFIG_RPS=y +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8367B_PHY=y +CONFIG_RTL8367_PHY=y +CONFIG_SENSORS_LTQ_CPUTEMP=y +CONFIG_SMP=y +CONFIG_SMP_UP=y +CONFIG_SWCONFIG_LEDS=y +CONFIG_SYNC_R4K=y +CONFIG_SYS_SUPPORTS_SCHED_SMT=y +CONFIG_SYS_SUPPORTS_SMP=y +CONFIG_TREE_RCU=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_XPS=y +CONFIG_XRX200_PHY_FW=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/lantiq/xway/config-4.14 b/target/linux/lantiq/xway/config-4.14 new file mode 100644 index 0000000000..79064ccc02 --- /dev/null +++ b/target/linux/lantiq/xway/config-4.14 @@ -0,0 +1,48 @@ +CONFIG_ADM6996_PHY=y +CONFIG_AR8216_PHY=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_POLLDEV=y +# CONFIG_ISDN is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_PLATFORM=y +CONFIG_MTD_NAND_XWAY=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_BEB_LIMIT=20 +CONFIG_MTD_UBI_BLOCK=y +# CONFIG_MTD_UBI_FASTMAP is not set +# CONFIG_MTD_UBI_GLUEBI is not set +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_NLS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PCI=y +# CONFIG_PCIE_LANTIQ is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LANTIQ=y +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8367B_PHY=y +CONFIG_RTL8367_PHY=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_UBIFS_FS_LZO=y +CONFIG_UBIFS_FS_ZLIB=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/lantiq/xway_legacy/config-4.14 b/target/linux/lantiq/xway_legacy/config-4.14 new file mode 100644 index 0000000000..c8aa631787 --- /dev/null +++ b/target/linux/lantiq/xway_legacy/config-4.14 @@ -0,0 +1,37 @@ +CONFIG_ADM6996_PHY=y +CONFIG_AR8216_PHY=y +CONFIG_BLK_MQ_PCI=y +CONFIG_CRC16=y +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +CONFIG_FIRMWARE_IN_KERNEL=y +# CONFIG_GPIO_SYSFS is not set +# CONFIG_HW_RANDOM is not set +CONFIG_INPUT=y +CONFIG_INPUT_EVDEV=y +CONFIG_INPUT_POLLDEV=y +# CONFIG_ISDN is not set +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_TIMER is not set +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +# CONFIG_MTD_PHYSMAP_OF is not set +CONFIG_NLS=y +CONFIG_OF_ADDRESS_PCI=y +CONFIG_OF_PCI=y +CONFIG_OF_PCI_IRQ=y +CONFIG_PCI=y +# CONFIG_PCIE_LANTIQ is not set +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_LANTIQ=y +CONFIG_RTL8306_PHY=y +CONFIG_RTL8366S_PHY=y +CONFIG_RTL8367B_PHY=y +CONFIG_RTL8367_PHY=y +CONFIG_USB=y +CONFIG_USB_COMMON=y +# CONFIG_USB_EHCI_HCD is not set +CONFIG_USB_SUPPORT=y +# CONFIG_USB_UHCI_HCD is not set +CONFIG_ZLIB_DEFLATE=y +CONFIG_ZLIB_INFLATE=y |